| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When using the lwp_info structure, avoid accessing its members directly,
and use the advertised function interfaces instead. This is according
to the instructions in linux-nat.h and prepares for making some of the
code common between gdb and gdbserver.
gdb/ChangeLog:
* s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
functions instead of accessing lwp_info structure members.
(s390_mark_per_info_changed): New function.
(s390_new_thread): Use it.
(s390_refresh_per_info_cb): New function.
(s390_refresh_per_info): Remove parameter. Refresh all lwps of
the current process.
(s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
(s390_remove_watchpoint): Likewise.
|
|
gcc-6.2.1-1.fc26.x86_64
gdb compile failed, /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:10: error: expected primary-expression before 'int'
decltype(int x)
^~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:10: error: expected ')' before 'int'
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:1: error: expected unqualified-id before 'decltype'
decltype(int x)
^~~~~~~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc: In function 'int main(int, char**)':
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:59:14: error: expected primary-expression before 'decltype'
double y = decltype(2);
^~~~~~~~
'decltype' is a registered keyword since C++11 which is now a default for GCC.
On Thu, 15 Sep 2016 14:06:56 +0200, Pedro Alves wrote:
Seems to be exercising the FLAG_SHADOW bits:
...
{"__typeof__", TYPEOF, OP_TYPEOF, 0 },
{"__typeof", TYPEOF, OP_TYPEOF, 0 },
{"typeof", TYPEOF, OP_TYPEOF, FLAG_SHADOW },
{"__decltype", DECLTYPE, OP_DECLTYPE, FLAG_CXX },
{"decltype", DECLTYPE, OP_DECLTYPE, FLAG_CXX | FLAG_SHADOW },
...
/* This is used to associate some attributes with a token. */
enum token_flag
{
...
/* If this bit is set, the token is conditional: if there is a
symbol of the same name, then the token is a symbol; otherwise,
the token is a keyword. */
FLAG_SHADOW = 2
};
So perhaps a better fix is to move that particular test to a
separate testcase that force-compiles with -std=c++03.
gdb/testsuite/ChangeLog
2016-09-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.cp/casts.cc (decltype): Move it ...
(main): ... with its call to ...
* gdb.cp/casts03.cc: ... a new file.
* gdb.cp/casts.exp: Add new file casts03.cc, move decltype test to it.
|
|
For each MAJOR-MINOR opcode tuple, we can have either a 3-operand, or
2-operand, or a single operand instruction format, depending on the
values present in i-field, and a-field.
The disassembler is reading the section containing the extension
instruction format and stores them in a table. Each table element
represents a linked list with encodings for a particular MAJOR-MINOR
tuple.
The current implementation checks only against the first element of
the list, hence, the issue.
This patch is walking the linked list until empty or finds an opcode
match. It also adds a test outlining the found problem.
opcodes/
2016-09-15 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format): Walk the linked list pointed by einsn.
gas/
2016-09-15 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/textinsnxop.d: New file.
* testsuite/gas/arc/textinsnxop.s: Likewise.
|
|
|
|
gcc-6.2.1-1.fc26.x86_64
g++ -std=c++03:
no warnings
g++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:0:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:34: error: ‘constexpr’ needed for in-class initialization of static
data member ‘const float gnu_obj_4::somewhere’ of non-integral type [-fpermissive]
static const float somewhere = 3.14159;
^~~~~~~
clang++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: warning: in-class initializer for static data member of type 'const
float' is a GNU extension [-Wgnu-static-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
1 warning generated.
clang++ -std=c++11:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: error: in-class initializer for static data member of type 'const
float' requires 'constexpr' specifier [-Wstatic-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:3: note: add 'constexpr'
static const float somewhere = 3.14159;
^
constexpr
1 error generated.
OK for check-in?
After the fix out of the 4 combinations above only this one remains non-empty:
clang++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: warning: in-class initializer for static data member of type 'const
float' is a GNU extension [-Wgnu-static-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
1 warning generated.
On Thu, 15 Sep 2016 15:10:50 +0200, Pedro Alves wrote:
Hmm, OK, now that I read the test, I think you were right in trying to
keep it safe, actually. The .exp file has:
if { $non_dwarf } { setup_xfail *-*-* }
gdb_test "print test4.everywhere" "\\$\[0-9\].* = 317" "static const int initialized in class definition"
if { $non_dwarf } { setup_xfail *-*-* }
gdb_test "print test4.somewhere" "\\$\[0-9\].* = 3.14\[0-9\]*" "static const float initialized in class definition"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Added by this:
https://sourceware.org/bugzilla/show_bug.cgi?id=11702
https://sourceware.org/ml/gdb-patches/2010-06/msg00677.html
https://sourceware.org/ml/gdb-patches/2010-06/txt00011.txt
So the new patch would make that highlighted tested above not
test what its test message says it is testing.
So I now think your original patch is better. Please push
that one instead.
gdb/testsuite/ChangeLog
2016-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.cp/m-static.h (gnu_obj_4::somewhere): Use constexpr for C++11.
|
|
* gdb.arch/powerpc-power.s: Update Power9 instruction tests
and sync up the test with tests in gas/testsuite/gas/ppc.
* gdb.arch/powerpc-power.exp: Likewise.
|
|
There were always various problems with compatibility with ccache:
https://bugzilla.redhat.com/show_bug.cgi?id=488863
https://bugzilla.redhat.com/show_bug.cgi?id=759592
https://sourceware.org/ml/gdb-patches/2009-02/msg00397.html
IMO in a summary ccache finds more a benefit of faster compilation despite the
debug info is no longer exactly the same (as without ccache).
Although for example in this case ccache helped to find a real GDB bug:
https://sourceware.org/ml/gdb-patches/2015-01/msg00497.html
For the GDB testcases ccache has (IMO) no real performance advantage and it
just brings heisenbugs - false FAILs - from time to time:
Breakpoint 1, main () at gdb/testsuite/gdb.base/vdso-warning.c:21^M
21 return 0;^M
(gdb) PASS: gdb.base/vdso-warning.exp: run: startup
->
Breakpoint 1, main () at gdb/testsuite/gdb.base/hbreak-unmapped.c:21^M
21 return 0;^M
(gdb) FAIL: gdb.base/vdso-warning.exp: run: startup
So I find most safe and easy to just disable ccache for all testsuites.
gdb/testsuite/ChangeLog
2016-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* lib/future.exp: Set CCACHE_DISABLE, clear CCACHE_NODISABLE.
|
|
gas/ChangeLog:
2016-09-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
dcti-couples-v9 only in ELF targets to avoid spurious failures in
sparc-aout and sparc-coff targets.
|
|
* readelf.c (process_mips_specific): Fix typo in error message.
|
|
opcodes/
* ppc-opc.c (powerpc_opcodes) <slbiag>: New mnemonic.
<addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool,
xor3>: Delete mnemonics.
<cp_abort>: Rename mnemonic from ...
<cpabort>: ...to this.
<setb>: Change to a X form instruction.
<sync>: Change to 1 operand form.
<copy>: Delete mnemonic.
<copy_first>: Rename mnemonic from ...
<copy>: ...to this.
<paste, paste.>: Delete mnemonics.
<paste_last>: Rename mnemonic from ...
<paste.>: ...to this.
gas/
* testsuite/gas/ppc/power9.d <slbiag, cpabort> New tests.
<addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool,
xor3, cp_abort, copy_first, paste, paste_last, sync>: Remove tests.
<copy, paste.>: Update tests.
* testsuite/gas/ppc/power9.s: Likewise.
|
|
|
|
bfd/
2016-09-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf32-arm.c (elf32_arm_gc_mark_extra_sections): Only mark section
not already marked.
ld/
2016-09-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/cmse-veneers.s: Add a test for ARMv8-M Security
Extensions entry functions in absolute section.
* testsuite/ld-arm/cmse-veneers.rd: Adapt expected output accordingly.
|
|
PR binutils/20605
* peicode.h (pe_bfd_read_buildid): Check that the Data Directory
contains a valid size for the Debug directory.
|
|
Merely dumping the mnemonic name in "architecture mismatch" errors may
not provide enough information to determine what went wrong, as the same
mnemonic can be used for different variants of an instruction pertaining
to different architecture levels.
This little patch makes the assembler to include the instruction
arguments in the error message.
gas/ChangeLog:
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Print the instruction arguments
in "architecture mismatch" error messages.
|
|
Before SPARC V9 the effect of having a delayed branch instruction in the
delay slot of a conditional delayed branch was undefined.
In SPARC V9 DCTI couples are well defined.
However, starting with the UltraSPARC Architecture 2005, DCTI
couples (of all kind) are deprecated and should not be used, as they may
be slow or behave differently to what the programmer expects.
This patch adds a new command line option --dcti-couples-detect to `as',
disabled by default, that makes the assembler to warn the user if an
unpredictable DCTI couple is found. Tests and documentation are
included.
gas/ChangeLog:
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (md_assemble): Detect and warning on
unpredictable DCTI couples in certain arches.
(dcti_couples_detect): New global.
(md_longopts): Add command line option -dcti-couples-detect.
(md_show_usage): Document -dcti-couples-detect.
(md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests.
* testsuite/gas/sparc/dcti-couples.s: New file.
* testsuite/gas/sparc/dcti-couples-v9c.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9c.l: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.l: Likewise.
* doc/as.texinfo (Overview): Document --dcti-couples-detect.
* doc/c-sparc.texi (Sparc-Opts): Likewise.
|
|
* format.c (struct bfd_preserve): New "build_id" field.
(bfd_preserve_save): Save "build_id".
(bfd_preserve_restore): Restore "build_id".
|
|
The assembler accepts dtpoff complex relocation expression like
identifier@dtpoff + const. However, it doesn't accept an expression such
as identifier@dtpoff@base + const. This patch solves this issue, and adds
a number of tests.
ld/
2016-09-14 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/tls-dtpoff.dd: New file.
* testsuite/ld-arc/tls-dtpoff.rd: Likewise.
* testsuite/ld-arc/tls-dtpoff.s: Likewise.
* testsuite/ld-arc/tls-relocs.ld: Likewise.
* testsuite/ld-arc/arc.exp: Add new tdpoff test.
gas/
2016-09-14 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/tls-relocs2.d: New file.
* testsuite/gas/arc/tls-relocs2.s: Likewise.
* config/tc-arc.c (tokenize_arguments): Accept offsets when base
is used.
|
|
present.
* arc-dis.c (arc_get_disassembler): Accept a null bfd gracefully.
|
|
ELF based linkers.
PR ld/20537
* emultempl/elf32.em: More OPTION_xxx values into an enum. Add
OPTION_NO_EH_FRAME_HDR.
(_add_options): Add support for --no-eh-frame-hdr.
* ld.texinfo: Document new option.
* lexsup.c (elf_shlib_list_options): List new option.
* NEWS: Mention the new option.
|
|
|
|
The last commit was supposed to have the reference to ptrace () removed.
The patch didn't get updated correctly before the commit. This commit
fixes the comment as requested
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Fixed comment, requested comment change
didn't get updated correctly. Removed reference to ptrace () call as
it is only true on Linux systems.
|
|
The test checks to make sure GDB exits cleanly if there is
no valid target binary. Currently, ppc and S390 fail on this
test. The function target_post_create_inferior () calls
linux_post_create_inferior () which calls the architecture
specific functions s390_arch_setup () and ppc_arch_setup ()
which make ptrace calls to access the architecture specific
registers. These ptrace calls fail because the process does
not exist causing GDB to exit on error.
This patch checks to see if the initial ptrace (PTRACE_TRACEME, ...)
call returned a status of TARGET_WAITKIND_EXITED indicating the
target has already exited. If the target has exited, then the
target_post_create_inferior () is not called since there is no
inferior to be setup. The test to see if the initial ptrace
call succeeded is done after the ptrace (PTRACE_TRACEME, ...)
call and the wait for the inferior process to stop, assuming
it exists, has occurred.
The patch has been tested on X86 64-bit, ppc64 and s390. If
fixes the test failures on ppc64 and s390. The test does not
fail on X86 64-bit. The patch does not introduce any additional
regression failures on any of these three platforms.
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Do not call
function target_post_create_inferior () if the
inferior process has already exited.
|
|
|
|
This patch adds alternate CPU names which adhere to the number of the
architecture document. So instead of having z196, zEC12, and z13 you
can use arch9, arch10, and arch11. The old cpu names stay valid and
should primarily be used.
The alternate names are supposed to improve compatibility with the IBM
XL compiler toolchain which uses the arch numbering.
opcodes/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Support alternate arch strings.
gas/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Support alternate arch
strings.
* doc/as.texinfo: Document new arch strings.
* doc/c-s390.texi: Likewise.
|
|
gas/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c: Set all facitily bits by default
|
|
opcodes/ChangeLog:
2016-09-12 Patrick Steuer <steuer@linux.vnet.ibm.com>
* s390-opc.txt: Fix kmctr instruction type.
gas/ChangeLog:
2016-09-12 Patrick Steuer <steuer@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z196.d: Adjust testcase.
|
|
GCC 6's ICF optimization pass is making the declaration of 'm1' and
'm2', on gdb.base/stap-probe.c, to be unified. However, this leads to
only one instance of the probe 'two' being created, which causes a
failure on the testsuite (which expects a multi-location breakpoint to
be inserted on the probe).
This patch fixes this failure by declaring a dummy variable on 'm1',
and using it as an argument to m1's version of probe 'two'. Since we
do not care about the contents of the functions nor about the
arguments of each probe 'two', this is OK.
gdb/testsuite/ChangeLog:
2016-09-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/stap-probe.c (m1): New variable 'dummy', necessary to
make m1's definition to be different from m2's. Use 'dummy' as an
argument for probe 'two'.
|
|
|
|
|
|
2016-09-10 Jon Beniston <jon@beniston.com>
* lib/mi-support.exp (mi_gdb_target_load): Use target_sim_options
for sim target.
|
|
|
|
On various GNU Elf architectures, including AArch64, ARM, s390/s390x,
ppc32/64, and sparc32/64, the dynamic loader passes HWCAP as a parameter
to each ifunc resolver. Currently there is an open glibc Bugzilla that
requests this to be generalized to all architectures:
https://sourceware.org/bugzilla/show_bug.cgi?id=19766
And various ifunc resolvers already rely on receiving HWCAP. Currently
GDB always calls an ifunc resolver without any arguments; thus the
resolver may receive garbage, and based on that, the resolver may decide
to return a function that is not suited for the given platform.
This patch always passes HWCAP to ifunc resolvers, even on systems where
the dynamic loader currently behaves otherwise. The rationale is
that (1) the dynamic loader may get adjusted on those systems as well in
the future; (2) passing an unused argument should not cause a problem
with existing resolvers; and (3) the logic is much simpler without such
a distinction.
gdb/ChangeLog:
* elfread.c (auxv.h): New include.
(elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
gdb/testsuite/ChangeLog:
* gdb.base/gnu-ifunc-lib.c (resolver_hwcap): New external
variable declaration.
(gnu_ifunc): Add parameter hwcap. Store it in resolver_hwcap.
* gdb.base/gnu-ifunc.c (resolver_hwcap): New global variable.
* gdb.base/gnu-ifunc.exp: Add test to verify that the resolver
received HWCAP as its argument.
|
|
|
|
I happened to notice a few unneeded casts in remote.c. In some cases
these are no-ops, and in others these cast away const, but in a context
where this is not needed.
I'm checking this in under the obvious rule.
Tested by rebuilding on x86-64 Fedora 24.
2016-09-08 Tom Tromey <tom@tromey.com>
* remote.c (remote_notif_stop_ack, remote_wait_as)
(show_remote_cmd): Remove unneeded casts.
|
|
* config/tc-i386.c (i386_target_format): Allow PROCESSOR_IAMCU
for Intel MCU.
|
|
|
|
Originally only Pentium integer instructions are allowed for IAMCU.
This patch removes such a restriction. For example, 387 and SSE2
instructions can be enabled by passing "-march=iamcu+sse2+387" to
assembler.
gas/
* config/tc-i386.c (valid_iamcu_cpu_flags): Removed.
(set_cpu_arch): Updated.
(md_parse_option): Likewise.
* testsuite/gas/i386/i386.exp: Run iamcu-4 and iamcu-5. Remove
iamcu-inval-2 and iamcu-inval-3.
* testsuite/gas/i386/iamcu-4.d: New file.
* testsuite/gas/i386/iamcu-4.s: Likewise.
* testsuite/gas/i386/iamcu-5.d: Likewise.
* testsuite/gas/i386/iamcu-5.s: Likewise.
* testsuite/gas/i386/iamcu-inval-2.l: Removed.
* testsuite/gas/i386/iamcu-inval-2.s: Likewise.
* testsuite/gas/i386/iamcu-inval-3.l: Likewise.
* testsuite/gas/i386/iamcu-inval-3.s: Likewise.
opcodes/
* i386-gen.c (cpu_flag_init): Remove CPU_IAMCU_COMPAT_FLAGS.
* i386-init.h: Regenerated.
|
|
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* opcode/arm.h (ARM_ARCH_V8A_CRC): New architecture.
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.c ((arm_cpus): Use ARM_ARCH_V8A_CRC for all
ARMv8-A CPUs except xgene1.
|
|
|
|
I noticed that if input is already pending on the new-ui TTY, gdb
internal-errors.
E.g., create /dev/pts/2, and type anything there (even just <return>
is sufficient).
Now start GDB creating a new UI on that TTY, while at the same time,
running a synchronous execution command. Something like:
$ gdb program -ex "new-ui console /dev/pts/2" -ex "start"
Back on /dev/pts/2, we get:
(gdb) .../src/gdb/event-top.c:360: internal-error: double prompt
A problem internal to GDB has been detected,
further debugging may prove unreliable.
While the main UI was waiting for "start" to finish, gdb kepts pumping
events, including the input fd of the extra console. The problem is
that stdin_event_handler doesn't restore the current UI back to what
it was, assuming that it's only ever called from the top level event
loop. However, in this case, it's being called from the nested event
loop from within maybe_wait_sync_command_done.
When finally the "start" command is done, we reach the code that
prints the prompt in the main UI, just before starting the main event
loop. Since now the current UI is pointing at the extra console (by
mistake), we find ourselves printing a double prompt on the extra
console. This is caught by the assertion that fails, as shown above.
Since other event handlers also don't restore the UI (e.g., signal
event handlers), I think it's better if whatever is pumping events to
take care to restore the UI, if it cares. That's what this patch
does. New test included.
gdb/ChangeLog:
2016-09-06 Pedro Alves <palves@redhat.com>
* top.c (wait_sync_command_done): Don't assume current_ui doesn't
change across events. Restore the current UI before returning.
(gdb_readline_wrapper): Restore the current UI before returning.
gdb/testsuite/ChangeLog:
2016-09-06 Pedro Alves <palves@redhat.com>
* gdb.base/new-ui-pending-input.c: New file.
* gdb.base/new-ui-pending-input.exp: New file.
* gdb.exp (clear_gdb_spawn_id): New procedure.
(with_spawn_id): Check whether gdb_spawn_id exists before
referencing it. If gdb_spawn_id didn't exist on entry, clear it
on exit.
|
|
Just a tidy, no functional changes.
gdb/ChangeLog:
2016-09-06 Pedro Alves <palves@redhat.com>
* event-top.c (restore_ui_cleanup): Now static.
(make_cleanup_restore_current_ui): New function.
(switch_thru_all_uis_init): Use it.
* infcall.c (call_thread_fsm_should_stop): Use it.
* infrun.c (fetch_inferior_event): Use it.
* top.c (new_ui_command): Use it.
* top.h (restore_ui_cleanup): Delete declaration.
(make_cleanup_restore_current_ui): New declaration.
|
|
We can resolve size relocation against symbol which needs copy relocation
when building executable.
bfd/
PR ld/20550
* elf64-x86-64.c (elf_x86_64_relocate_section): Resolve size
relocation with copy relocation when building executable.
ld/
PR ld/20550
* testsuite/ld-x86-64/pr20550a.s: New file.
* testsuite/ld-x86-64/pr20550b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp (x86_64tests): Add tests for
PR ld/20550.
|
|
* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
without any sanitization options.
(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but without
any sanitization options.
(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
as CFLAGS and CXXFLAGS respectively.
|
|
Now that all the prerequisites are in place, this commit finally adds support
for handling the __float128 type on Intel and Power, by providing appropriate
platform-specific versions of the floatformat_for_type callback.
Since at this point we do not yet have any indication in the debug info to
distinguish different floating-point formats of the same length, we simply
use the type name as hint. Types named "__float128" get the IEEE format.
In addition to handling "__float128" itself, we also recognize "_Float128"
and (on Power) "_Float64x", as well as the complex versions of those.
(As pointed out by Joseph Myers, starting with GCC 7, __float128 is just
a typedef for _Float128 -- but it's good to handle this anyway.)
A new test case does some simple verification that the format is decoded
correctly, using both __float128 and "long double" to make sure using both
in the same file still works. Another new test verifies handling of the
_FloatN and _FloatNx types supported by GCC 7, as well as the complex
versions of those types.
Note that this still only supports basic format decoding and encoding.
We do not yet support the GNU extension 'g' suffix for __float128 constants.
In addition, since all *arithmetic* on floating-point values is still
performed in native host "long double" arithmetic, if that format is not
able to encode all target __float128 values, we may get incorrect results.
(To fix this would require implementing fully synthetic target floating-
point arithmetic along the lines of GCC's real.c, presumably using MPFR.)
gdb/ChangeLog:
* i386-tdep.c (i386_floatformat_for_type): New function.
(i386_gdbarch_init): Install it.
* ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
(ppc_linux_init_abi): Install it.
gdb/testsuite/ChangeLog:
* gdb.base/float128.c: New file.
* gdb.base/float128.exp: Likewise.
* gdb.base/floatn.c: Likewise.
* gdb.base/floatn.exp: Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
At this point, all TYPE_CODE_FLT types carry their floating-point format,
except for those creating from reading DWARF or stabs debug info. Those
will be addressed by this commit.
The main issue here is that we actually have to determine which floating-
point format to use. Currently, we only have the type length as input
to this decision. In the future, we may hopefully get --at least in
DWARF-- additional information to help disambiguate multiple different
formats of the same length. For now, we can still look at the type name
as a hint.
This decision logic is encapsulated in a gdbarch callback to allow
platform-specific overrides. The default implementation use the same
logic (compare type length against the various gdbarch_..._bit sizes)
that is currently implemented in floatformat_from_length.
With this commit, all platforms still use the default logic, so there
should be no actual change in behavior. A follow-on commit will add
support for __float128 on Intel and Power.
Once dwarf2read.c and stabsread.c make use of the new callback to
determine floating-point formats, we're now sure every TYPE_CODE_FLT
type will always carry its format. The commit therefore adds asserts
to verify_floatformat to ensure new code will continue to always
provide formats, and removes the code in floatformat_from_type that
used to handle types with a NULL TYPE_FLOATFORMAT.
gdb/ChangeLog:
* gdbarch.sh (floatformat_for_type): New gdbarch callback.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (default_floatformat_for_type): New prototype.
* arch-utils.c (default_floatformat_for_type): New function.
* doublest.c (floatformat_from_length): Remove.
(floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
* gdbtypes.c (verify_floatformat): Require non-NULL format.
* dwarf2read.c (dwarf2_init_float_type): New function.
(read_base_type): Use it.
* stabsread.c (dbx_init_float_type): New function.
(read_sun_floating_type): Use it.
(read_range_type): Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
Many callers of init_float_type and arch_float_type still pass a NULL
floatformat. This commit changes those callers where the floatformat
that is supposed to be use is obvious. There are two categories where
this is the case:
- A number of built-in types are intended to match the platform ABI
floating-point types (i.e. types that use gdbarch_float_bit etc.).
Those places should use the platform ABI floating-point formats
defined via gdbarch_float_format etc.
- A number of language built-in types should simply use IEEE floating-
point formats, since the language actually defines that this is the
format that must be used to implement floating-point types for this
language. (This affects Java, Go, and Rust.) The same applies for
to the predefined "RS/6000" stabs floating-point built-in types.
gdb/ChangeLog:
* ada-lang.c (ada_language_arch_info): Use gdbarch-provided
platform ABI floating-point formats for built-in types.
* d-lang.c (build_d_types): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* mdebugread.c (basic_type): Likewise.
* go-lang.c (build_go_types): Use IEEE floating-point formats
for language built-in types as mandanted by the language.
* jv-lang.c (build_java_types): Likewise.
* rust-lang.c (rust_language_arch_info): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
init_type (and arch_integer_type) currently use a special hack to set the
TYPE_NOSIGN flag if the type name is exactly "char". This commit moves the
hack up to the callers of those routines.
The special case currently can hit only for types created from dwarf2read,
but read_base_type actually implements the "char" check itself, so it is
redundant to do it in init_type as well. (Note that stabsread.c and the
other type readers always pass NULL as name to init_type, so the special
case can never hit for those.)
A few other cases create pre-definded types with a hard-coded name of "char";
the commit simply moves setting the TYPE_NOSIGN flag to those places.
No functional change intended.
gdb/ChangeLog:
* gdbtypes.c (init_type): Remove "char" special case.
(arch_integer_type): Likewise.
(gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
(objfile_type): Likewise.
* mdebugread.c (basic_type): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
Now that init_type no longer takes a FLAGS argument, there is no user of
the TYPE_FLAGS_... enum values left. This commit removes them (and all
references to them in comments as well).
This is mostly a no-op, except for a change to the Python type printer,
which attempted to use them before. (As best as I can tell, this wasn't
really needed anyway, since it was only used to pretty-print type
*instance* flags, which only use the instance flags.)
gdb/ChangeLog:
* gdbtypes.h (enum type_flag_value): Remove.
Remove references to TYPE_FLAG_... in comments throughout.
* gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_...
flags, print the corresponding TYPE_... access macro names.
Remove references to TYPE_FLAG_... in comments throughout.
* infcall.c: Remove references to TYPE_FLAG_... in comments.
* valprint.c: Likewise.
* gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
values, only TYPE_INSTANCE_FLAG_... values.
(class TypeFlagsPrinter): Likewise.
gdb/testsuite/ChangeLog:
* gdb.cp/hang.exp: Remove reference to TYPE_FLAG_STUB in comment.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
This adds a number of helper routines for creating objfile-owned types;
these correspond 1:1 to the already existing helper routines for creating
gdbarch-owned types, and are intended to be used instead of init_type.
A shared fragment of init_float_type and arch_float_type is extracted into
a separate subroutine verify_subroutine.
The commit also brings the interface of init_type in line with the one for
arch_type. In particular, this means removing the FLAGS argument; callers
now set the required flags directly. (Since most callers use the new
helper routines, very few callers actually need to set any additional
flags directly any more.)
Note that this means all the TYPE_FLAGS_... defined are no longer needed
anywhere; they will be removed by a follow-on commit.
All users of init_type are changed to use on of the new helpers where
possible. No functional change intended.
gdb/ChangeLog:
* gdbtypes.h (init_type): Remove FLAGS argument. Move OBJFILE
argument to first position.
(init_integer_type): New prototype.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
* gdbtypes.c (verify_floatflormat): New function.
(init_type): Remove FLAGS argument and processing. Move OBJFILE
argument to first position.
(init_integer_type): New function.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
(arch_float_type): Use verify_floatflormat.
(objfile_type): Use init_..._type helpers instead of calling
init_type directly.
* dwarf2read.c (fixup_go_packaging): Update to changed init_type
prototype.
(read_namespace_type): Likewise.
(read_module_type): Likewise.
(read_typedef): Likewise.
(read_unspecified_type): Likewise.
(build_error_marker_type): Likewise.
(read_base_type): Use init_..._type helpers.
* mdebugread.c (basic_type): Use init_..._type helpers.
(parse_type): Update to changed init_type prototype.
(cross_ref): Likewise.
* stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
(read_sun_builtin_type): Likewise.
(read_sun_floating_type): Likewise.
(read_range_type): Likewise. Also update to changed init_type
prototype.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
gdbtypes provides a number of helper routines that can be called instead of
using arch_type directly to create a type of a particular kind. This patch
adds two additional such routines that have been missing so far, to allow
creation of TYPE_CODE_DECFLOAT and TYPE_CODE_POINTER types.
The patch also changes a number of places to use the new helper routines
instead of calling arch_type directly. No functional change intended.
gdb/ChangeLog:
* gdbtypes.h (arch_decfloat_type): New prototype.
(arch_pointer_type): Likewise.
* gdbtypes.c (arch_decfloat_type): New function.
(arch_pointer_type): Likewise.
(gdbtypes_post_init): Use arch_decfloat_type.
* avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* m32c-tdep.c (make_types): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
