aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-24Automatic date update in version.inGDB Administrator1-1/+1
2016-12-23MIPS/BFD: Remove EI_ABIVERSION 5 allocation for PT_GNU_STACK supportMaciej W. Rozycki2-3/+5
Revert commit 17733f5be961 ("Increment the ABIVERSION to 5 for MIPS objects with non-executable stacks.") and remove EI_ABIVERSION 5 allocation for PT_GNU_STACK support, which has not made it to glibc and will be reassigned. bfd/ * bfd/elfxx-mips.c (_bfd_mips_post_process_headers): Revert 2016-02-23 change and remove EI_ABIVERSION 5 support.
2016-12-23MIPS16: Add ASMACRO instruction supportMaciej W. Rozycki12-10/+116
Add ASMACRO instruction support as per the MIPS16e ASE architecture specifications [1][2], completing MIPS16e instruction set support. [1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65 [2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66 include/ * opcode/mips.h: Document `0', `1', `2', `3', `4' and `s' operand codes. opcodes/ * mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3', `4' and `s' operand codes. (mips16_opcodes): Add "asmacro" entry. binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: Update for ASMACRO support. gas/ * testsuite/gas/mips/mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-asmacro.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Simplify extended operand handlingMaciej W. Rozycki5-21/+31
Simplify extended operand handling and only specially process immediates which require bit shuffling, using the generic operand insertion and extraction handlers for the '<' (5-bit shift amount) operand code in particular. Require the least significant bit of all extended operand forms to be (artificially) set to 0 for their special processing to trigger. gas/ * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' use to operands whose LSB position is zero. opcodes/ * mips-dis.c (print_mips16_insn_arg): Simplify processing of extended operands. * mips16-opc.c (decode_mips16_operand): Switch the extended form of the `<' operand type to LSB position 22.
2016-12-23MIPS16/GAS: Clean up invalid unextended operand handlingMaciej W. Rozycki9-2/+245
Bail out right away when an unextended instruction encoding is required either with the use of a `.t' suffix or by means of `.set noautoextend', however an operand supplied requires the extended instruction form to be used. This is to avoid messing up with the internal state of the assembler, even though no actual failures are known to happen as a result. Add test cases for the situation concerned. gas/ * config/tc-mips.c (match_mips16_insn): Don't update `forced_insn_length' or the instruction opcode if an operand requires an extended instruction form, but an unextended one has been requested. * testsuite/gas/mips/mips16-relax-unextended-1.d: New test. * testsuite/gas/mips/mips16-relax-unextended-2.d: New test. * testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-1.s: New test source. * testsuite/gas/mips/mips16-relax-unextended-2.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Reassign `0' and `4' operand codesMaciej W. Rozycki6-25/+43
Replace `0' and `4' operand codes with `.' and `F' respectively to free up the `0'-`4' consecutive range. No functional change. gas/ * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_macro): Likewise. include/ * opcode/mips.h: Replace `0' and `4' operand codes with `.' and `F' respectively. opcodes/ * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_opcodes): Likewise.
2016-12-23MIPS16: Handle non-extensible instructions correctlyMaciej W. Rozycki34-111/+2202
Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Remove "extended" BREAK/SDBBP handlingMaciej W. Rozycki4-10/+12
Remove special casing for the `6' operand code used for the embedded trap code of the BREAK and the SDBBP instructions to support supposedly extended forms of these instructions. According to all versions of the MIPS16 ASE specifications these instructions are not extensible [1][2][3][4][5][7][8][10][11], and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [5][6][9][10]. Therefore supposedly extended BREAK and SDBBP instructions do not serve their purpose anymore as they do not cause a Bp and a Debug exception respectively and supporting these forms in disassembly only causes confusion. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] same, Table 18. "Extendable MIPS16 Instructions", p. 24 [4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38 [5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41 [6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41 [7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49 [8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39 [9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42 [10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43 [11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50 gas/ * config/tc-mips.c (match_mips16_insn): Remove the `6' operand code special case and its associated comment. opcodes/ * mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended encoding support.
2016-12-23MIPS16/GAS: Fix forced size suffixes with argumentless instructionsMaciej W. Rozycki5-10/+51
Correct the handling of `.e' and `.t' instruction size suffixes with instruction mnemonics which are not followed by any text on the same line, such as arguments or white space, e.g.: $ cat test.s .set mips16 foo: entry.t # comment entry.t exit.t # comment exit.t nop.t # comment nop.t $ as -32 -o test.o test.s test.s: Assembler messages: test.s:4: Error: unrecognized opcode `entry.t' test.s:6: Error: unrecognized opcode `exit.t' test.s:8: Error: unrecognized opcode `nop.t' $ gas/ * config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction suffixes followed by a null character rather than a space too. * testsuite/gas/mips/mips16-insn-length-noargs.d: New test. * testsuite/gas/mips/mips16-insn-length-noargs.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-23MIPS16/GAS: Disallow EXTEND delay-slot schedulingMaciej W. Rozycki6-1/+56
Do not allow any explicitly coded EXTEND instruction to be automatically scheduled into a jump delay slot, as an EXTEND prefix is coupled with the next regular MIPS16 instruction and therefore swapping it with a jump would change program's semantics; EXTEND is not architecturally allowed to be present in a jump delay slot anyway. opcodes/ * mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for "extend". gas/ * testsuite/gas/mips/mips16-extend-swap.d: New test. * testsuite/gas/mips/mips16-extend-swap.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-23opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFDMaciej W. Rozycki8-12/+150
Fix a regression introduced with commit 5e7fc731f80e ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), further updated with commit 4df995c77118 ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), and use autoconf to check for the presence of `bfd_mips_elf_get_abiflags' in BFD. opcodes/ * mips-dis.c (set_default_mips_dis_options): Use HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the call to `bfd_mips_elf_get_abiflags'. * configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'. * aclocal.m4: Regenerate. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate.
2016-12-23Fix more cases of improper test namesLuis Machado746-942/+1597
I noticed more occurrences of improper test names. The rather mechanical, tedious and large patch below addresses, hopefully, most of the leftover cases. As usual, another pair of eyes is welcome to check if missed something or did an invalid substitution. This patch also fixes the prepare_for_testing calls to pass proper test names. gdb/testsuite/ChangeLog: 2016-12-23 Luis Machado <lgustavo@codesourcery.com> Fix test names for the following files: * gdb.ada/exec_changed.exp * gdb.ada/info_types.exp * gdb.arch/aarch64-atomic-inst.exp * gdb.arch/aarch64-fp.exp * gdb.arch/altivec-abi.exp * gdb.arch/altivec-regs.exp * gdb.arch/amd64-byte.exp * gdb.arch/amd64-disp-step.exp * gdb.arch/amd64-dword.exp * gdb.arch/amd64-entry-value-inline.exp * gdb.arch/amd64-entry-value-param.exp * gdb.arch/amd64-entry-value-paramref.exp * gdb.arch/amd64-entry-value.exp * gdb.arch/amd64-i386-address.exp * gdb.arch/amd64-invalid-stack-middle.exp * gdb.arch/amd64-invalid-stack-top.exp * gdb.arch/amd64-optimout-repeat.exp * gdb.arch/amd64-prologue-skip.exp * gdb.arch/amd64-prologue-xmm.exp * gdb.arch/amd64-stap-special-operands.exp * gdb.arch/amd64-stap-wrong-subexp.exp * gdb.arch/amd64-tailcall-cxx.exp * gdb.arch/amd64-tailcall-noret.exp * gdb.arch/amd64-tailcall-ret.exp * gdb.arch/amd64-tailcall-self.exp * gdb.arch/amd64-word.exp * gdb.arch/arm-bl-branch-dest.exp * gdb.arch/arm-disp-step.exp * gdb.arch/arm-neon.exp * gdb.arch/arm-single-step-kernel-helper.exp * gdb.arch/avr-flash-qualifier.exp * gdb.arch/disp-step-insn-reloc.exp * gdb.arch/e500-abi.exp * gdb.arch/e500-regs.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/i386-avx512.exp * gdb.arch/i386-bp_permanent.exp * gdb.arch/i386-byte.exp * gdb.arch/i386-cfi-notcurrent.exp * gdb.arch/i386-disp-step.exp * gdb.arch/i386-dr3-watch.exp * gdb.arch/i386-float.exp * gdb.arch/i386-gnu-cfi.exp * gdb.arch/i386-mpx-map.exp * gdb.arch/i386-mpx-sigsegv.exp * gdb.arch/i386-mpx-simple_segv.exp * gdb.arch/i386-mpx.exp * gdb.arch/i386-permbkpt.exp * gdb.arch/i386-prologue.exp * gdb.arch/i386-signal.exp * gdb.arch/i386-size-overlap.exp * gdb.arch/i386-unwind.exp * gdb.arch/i386-word.exp * gdb.arch/mips-fcr.exp * gdb.arch/powerpc-d128-regs.exp * gdb.arch/powerpc-stackless.exp * gdb.arch/ppc64-atomic-inst.exp * gdb.arch/s390-stackless.exp * gdb.arch/s390-tdbregs.exp * gdb.arch/s390-vregs.exp * gdb.arch/sparc-sysstep.exp * gdb.arch/thumb-bx-pc.exp * gdb.arch/thumb-singlestep.exp * gdb.arch/thumb2-it.exp * gdb.arch/vsx-regs.exp * gdb.asm/asm-source.exp * gdb.base/a2-run.exp * gdb.base/advance.exp * gdb.base/all-bin.exp * gdb.base/anon.exp * gdb.base/args.exp * gdb.base/arithmet.exp * gdb.base/async-shell.exp * gdb.base/async.exp * gdb.base/attach-pie-noexec.exp * gdb.base/attach-twice.exp * gdb.base/auto-load.exp * gdb.base/bang.exp * gdb.base/bitfields.exp * gdb.base/break-always.exp * gdb.base/break-caller-line.exp * gdb.base/break-entry.exp * gdb.base/break-inline.exp * gdb.base/break-on-linker-gcd-function.exp * gdb.base/break-probes.exp * gdb.base/break.exp * gdb.base/breakpoint-shadow.exp * gdb.base/call-ar-st.exp * gdb.base/call-sc.exp * gdb.base/call-signal-resume.exp * gdb.base/call-strs.exp * gdb.base/callfuncs.exp * gdb.base/catch-fork-static.exp * gdb.base/catch-gdb-caused-signals.exp * gdb.base/catch-load.exp * gdb.base/catch-signal-fork.exp * gdb.base/catch-signal.exp * gdb.base/catch-syscall.exp * gdb.base/charset.exp * gdb.base/checkpoint.exp * gdb.base/chng-syms.exp * gdb.base/code-expr.exp * gdb.base/code_elim.exp * gdb.base/commands.exp * gdb.base/completion.exp * gdb.base/complex.exp * gdb.base/cond-expr.exp * gdb.base/condbreak.exp * gdb.base/consecutive.exp * gdb.base/continue-all-already-running.exp * gdb.base/coredump-filter.exp * gdb.base/corefile.exp * gdb.base/dbx.exp * gdb.base/debug-expr.exp * gdb.base/define.exp * gdb.base/del.exp * gdb.base/disabled-location.exp * gdb.base/disasm-end-cu.exp * gdb.base/disasm-optim.exp * gdb.base/display.exp * gdb.base/duplicate-bp.exp * gdb.base/ena-dis-br.exp * gdb.base/ending-run.exp * gdb.base/enumval.exp * gdb.base/environ.exp * gdb.base/eu-strip-infcall.exp * gdb.base/eval-avoid-side-effects.exp * gdb.base/eval-skip.exp * gdb.base/exitsignal.exp * gdb.base/expand-psymtabs.exp * gdb.base/filesym.exp * gdb.base/find-unmapped.exp * gdb.base/finish.exp * gdb.base/float.exp * gdb.base/foll-exec-mode.exp * gdb.base/foll-exec.exp * gdb.base/foll-fork.exp * gdb.base/fortran-sym-case.exp * gdb.base/freebpcmd.exp * gdb.base/func-ptr.exp * gdb.base/func-ptrs.exp * gdb.base/funcargs.exp * gdb.base/gcore-buffer-overflow.exp * gdb.base/gcore-relro-pie.exp * gdb.base/gcore-relro.exp * gdb.base/gcore.exp * gdb.base/gdb1090.exp * gdb.base/gdb11530.exp * gdb.base/gdb11531.exp * gdb.base/gdb1821.exp * gdb.base/gdbindex-stabs.exp * gdb.base/gdbvars.exp * gdb.base/hbreak.exp * gdb.base/hbreak2.exp * gdb.base/included.exp * gdb.base/infcall-input.exp * gdb.base/inferior-died.exp * gdb.base/infnan.exp * gdb.base/info-macros.exp * gdb.base/info-os.exp * gdb.base/info-proc.exp * gdb.base/info-shared.exp * gdb.base/info-target.exp * gdb.base/infoline.exp * gdb.base/interp.exp * gdb.base/interrupt.exp * gdb.base/jit-reader.exp * gdb.base/jit-simple.exp * gdb.base/kill-after-signal.exp * gdb.base/kill-detach-inferiors-cmd.exp * gdb.base/label.exp * gdb.base/langs.exp * gdb.base/ldbl_e308.exp * gdb.base/line-symtabs.exp * gdb.base/linespecs.exp * gdb.base/list.exp * gdb.base/long_long.exp * gdb.base/longest-types.exp * gdb.base/maint.exp * gdb.base/max-value-size.exp * gdb.base/memattr.exp * gdb.base/mips_pro.exp * gdb.base/morestack.exp * gdb.base/moribund-step.exp * gdb.base/multi-forks.exp * gdb.base/nested-addr.exp * gdb.base/nextoverexit.exp * gdb.base/noreturn-finish.exp * gdb.base/noreturn-return.exp * gdb.base/nostdlib.exp * gdb.base/offsets.exp * gdb.base/opaque.exp * gdb.base/pc-fp.exp * gdb.base/permissions.exp * gdb.base/print-symbol-loading.exp * gdb.base/prologue-include.exp * gdb.base/psymtab.exp * gdb.base/ptype.exp * gdb.base/random-signal.exp * gdb.base/randomize.exp * gdb.base/range-stepping.exp * gdb.base/readline-ask.exp * gdb.base/recpar.exp * gdb.base/recurse.exp * gdb.base/relational.exp * gdb.base/restore.exp * gdb.base/return-nodebug.exp * gdb.base/return.exp * gdb.base/run-after-attach.exp * gdb.base/save-bp.exp * gdb.base/scope.exp * gdb.base/sect-cmd.exp * gdb.base/set-lang-auto.exp * gdb.base/set-noassign.exp * gdb.base/setvar.exp * gdb.base/sigall.exp * gdb.base/sigbpt.exp * gdb.base/siginfo-addr.exp * gdb.base/siginfo-infcall.exp * gdb.base/siginfo-obj.exp * gdb.base/siginfo.exp * gdb.base/signals-state-child.exp * gdb.base/signest.exp * gdb.base/sigstep.exp * gdb.base/sizeof.exp * gdb.base/skip.exp * gdb.base/solib-corrupted.exp * gdb.base/solib-nodir.exp * gdb.base/solib-search.exp * gdb.base/stack-checking.exp * gdb.base/stale-infcall.exp * gdb.base/stap-probe.exp * gdb.base/start.exp * gdb.base/step-break.exp * gdb.base/step-bt.exp * gdb.base/step-line.exp * gdb.base/step-over-exit.exp * gdb.base/step-over-syscall.exp * gdb.base/step-resume-infcall.exp * gdb.base/step-test.exp * gdb.base/store.exp * gdb.base/structs3.exp * gdb.base/sym-file.exp * gdb.base/symbol-without-target_section.exp * gdb.base/term.exp * gdb.base/testenv.exp * gdb.base/ui-redirect.exp * gdb.base/until.exp * gdb.base/unwindonsignal.exp * gdb.base/value-double-free.exp * gdb.base/vla-datatypes.exp * gdb.base/vla-ptr.exp * gdb.base/vla-sideeffect.exp * gdb.base/volatile.exp * gdb.base/watch-cond-infcall.exp * gdb.base/watch-cond.exp * gdb.base/watch-non-mem.exp * gdb.base/watch-read.exp * gdb.base/watch-vfork.exp * gdb.base/watchpoint-cond-gone.exp * gdb.base/watchpoint-delete.exp * gdb.base/watchpoint-hw-hit-once.exp * gdb.base/watchpoint-hw.exp * gdb.base/watchpoint-stops-at-right-insn.exp * gdb.base/watchpoints.exp * gdb.base/wchar.exp * gdb.base/whatis-exp.exp * gdb.btrace/buffer-size.exp * gdb.btrace/data.exp * gdb.btrace/delta.exp * gdb.btrace/dlopen.exp * gdb.btrace/enable.exp * gdb.btrace/exception.exp * gdb.btrace/function_call_history.exp * gdb.btrace/gcore.exp * gdb.btrace/instruction_history.exp * gdb.btrace/nohist.exp * gdb.btrace/reconnect.exp * gdb.btrace/record_goto-step.exp * gdb.btrace/record_goto.exp * gdb.btrace/rn-dl-bind.exp * gdb.btrace/segv.exp * gdb.btrace/step.exp * gdb.btrace/stepi.exp * gdb.btrace/tailcall-only.exp * gdb.btrace/tailcall.exp * gdb.btrace/tsx.exp * gdb.btrace/unknown_functions.exp * gdb.btrace/vdso.exp * gdb.compile/compile-ifunc.exp * gdb.compile/compile-ops.exp * gdb.compile/compile-print.exp * gdb.compile/compile-setjmp.exp * gdb.cp/abstract-origin.exp * gdb.cp/ambiguous.exp * gdb.cp/annota2.exp * gdb.cp/annota3.exp * gdb.cp/anon-ns.exp * gdb.cp/anon-struct.exp * gdb.cp/anon-union.exp * gdb.cp/arg-reference.exp * gdb.cp/baseenum.exp * gdb.cp/bool.exp * gdb.cp/breakpoint.exp * gdb.cp/bs15503.exp * gdb.cp/call-c.exp * gdb.cp/casts.exp * gdb.cp/chained-calls.exp * gdb.cp/class2.exp * gdb.cp/classes.exp * gdb.cp/cmpd-minsyms.exp * gdb.cp/converts.exp * gdb.cp/cp-relocate.exp * gdb.cp/cpcompletion.exp * gdb.cp/cpexprs.exp * gdb.cp/cplabel.exp * gdb.cp/cplusfuncs.exp * gdb.cp/cpsizeof.exp * gdb.cp/ctti.exp * gdb.cp/derivation.exp * gdb.cp/destrprint.exp * gdb.cp/dispcxx.exp * gdb.cp/enum-class.exp * gdb.cp/exception.exp * gdb.cp/exceptprint.exp * gdb.cp/expand-psymtabs-cxx.exp * gdb.cp/expand-sals.exp * gdb.cp/extern-c.exp * gdb.cp/filename.exp * gdb.cp/formatted-ref.exp * gdb.cp/fpointer.exp * gdb.cp/gdb1355.exp * gdb.cp/gdb2495.exp * gdb.cp/hang.exp * gdb.cp/impl-this.exp * gdb.cp/infcall-dlopen.exp * gdb.cp/inherit.exp * gdb.cp/iostream.exp * gdb.cp/koenig.exp * gdb.cp/local.exp * gdb.cp/m-data.exp * gdb.cp/m-static.exp * gdb.cp/mb-ctor.exp * gdb.cp/mb-inline.exp * gdb.cp/mb-templates.exp * gdb.cp/member-name.exp * gdb.cp/member-ptr.exp * gdb.cp/meth-typedefs.exp * gdb.cp/method.exp * gdb.cp/method2.exp * gdb.cp/minsym-fallback.exp * gdb.cp/misc.exp * gdb.cp/namelessclass.exp * gdb.cp/namespace-enum.exp * gdb.cp/namespace-nested-import.exp * gdb.cp/namespace.exp * gdb.cp/nextoverthrow.exp * gdb.cp/no-dmgl-verbose.exp * gdb.cp/non-trivial-retval.exp * gdb.cp/noparam.exp * gdb.cp/nsdecl.exp * gdb.cp/nsimport.exp * gdb.cp/nsnested.exp * gdb.cp/nsnoimports.exp * gdb.cp/nsrecurs.exp * gdb.cp/nsstress.exp * gdb.cp/nsusing.exp * gdb.cp/operator.exp * gdb.cp/oranking.exp * gdb.cp/overload-const.exp * gdb.cp/overload.exp * gdb.cp/ovldbreak.exp * gdb.cp/ovsrch.exp * gdb.cp/paren-type.exp * gdb.cp/parse-lang.exp * gdb.cp/pass-by-ref.exp * gdb.cp/pr-1023.exp * gdb.cp/pr-1210.exp * gdb.cp/pr-574.exp * gdb.cp/pr10687.exp * gdb.cp/pr12028.exp * gdb.cp/pr17132.exp * gdb.cp/pr17494.exp * gdb.cp/pr9067.exp * gdb.cp/pr9167.exp * gdb.cp/pr9631.exp * gdb.cp/printmethod.exp * gdb.cp/psmang.exp * gdb.cp/psymtab-parameter.exp * gdb.cp/ptype-cv-cp.exp * gdb.cp/ptype-flags.exp * gdb.cp/re-set-overloaded.exp * gdb.cp/ref-types.exp * gdb.cp/rtti.exp * gdb.cp/scope-err.exp * gdb.cp/shadow.exp * gdb.cp/smartp.exp * gdb.cp/static-method.exp * gdb.cp/static-print-quit.exp * gdb.cp/temargs.exp * gdb.cp/templates.exp * gdb.cp/try_catch.exp * gdb.cp/typedef-operator.exp * gdb.cp/typeid.exp * gdb.cp/userdef.exp * gdb.cp/using-crash.exp * gdb.cp/var-tag.exp * gdb.cp/virtbase.exp * gdb.cp/virtfunc.exp * gdb.cp/virtfunc2.exp * gdb.cp/vla-cxx.exp * gdb.disasm/t01_mov.exp * gdb.disasm/t02_mova.exp * gdb.disasm/t03_add.exp * gdb.disasm/t04_sub.exp * gdb.disasm/t05_cmp.exp * gdb.disasm/t06_ari2.exp * gdb.disasm/t07_ari3.exp * gdb.disasm/t08_or.exp * gdb.disasm/t09_xor.exp * gdb.disasm/t10_and.exp * gdb.disasm/t11_logs.exp * gdb.disasm/t12_bit.exp * gdb.disasm/t13_otr.exp * gdb.dlang/circular.exp * gdb.dwarf2/arr-stride.exp * gdb.dwarf2/arr-subrange.exp * gdb.dwarf2/atomic-type.exp * gdb.dwarf2/bad-regnum.exp * gdb.dwarf2/bitfield-parent-optimized-out.exp * gdb.dwarf2/callframecfa.exp * gdb.dwarf2/clztest.exp * gdb.dwarf2/corrupt.exp * gdb.dwarf2/data-loc.exp * gdb.dwarf2/dup-psym.exp * gdb.dwarf2/dw2-anon-mptr.exp * gdb.dwarf2/dw2-anonymous-func.exp * gdb.dwarf2/dw2-bad-mips-linkage-name.exp * gdb.dwarf2/dw2-bad-unresolved.exp * gdb.dwarf2/dw2-basic.exp * gdb.dwarf2/dw2-canonicalize-type.exp * gdb.dwarf2/dw2-case-insensitive.exp * gdb.dwarf2/dw2-common-block.exp * gdb.dwarf2/dw2-compdir-oldgcc.exp * gdb.dwarf2/dw2-compressed.exp * gdb.dwarf2/dw2-const.exp * gdb.dwarf2/dw2-cp-infcall-ref-static.exp * gdb.dwarf2/dw2-cu-size.exp * gdb.dwarf2/dw2-dup-frame.exp * gdb.dwarf2/dw2-entry-value.exp * gdb.dwarf2/dw2-icycle.exp * gdb.dwarf2/dw2-ifort-parameter.exp * gdb.dwarf2/dw2-inline-break.exp * gdb.dwarf2/dw2-inline-param.exp * gdb.dwarf2/dw2-intercu.exp * gdb.dwarf2/dw2-intermix.exp * gdb.dwarf2/dw2-lexical-block-bare.exp * gdb.dwarf2/dw2-linkage-name-trust.exp * gdb.dwarf2/dw2-minsym-in-cu.exp * gdb.dwarf2/dw2-noloc.exp * gdb.dwarf2/dw2-op-call.exp * gdb.dwarf2/dw2-op-out-param.exp * gdb.dwarf2/dw2-opt-structptr.exp * gdb.dwarf2/dw2-param-error.exp * gdb.dwarf2/dw2-producer.exp * gdb.dwarf2/dw2-ranges-base.exp * gdb.dwarf2/dw2-ref-missing-frame.exp * gdb.dwarf2/dw2-reg-undefined.exp * gdb.dwarf2/dw2-regno-invalid.exp * gdb.dwarf2/dw2-restore.exp * gdb.dwarf2/dw2-restrict.exp * gdb.dwarf2/dw2-single-line-discriminators.exp * gdb.dwarf2/dw2-strp.exp * gdb.dwarf2/dw2-undefined-ret-addr.exp * gdb.dwarf2/dw2-unresolved.exp * gdb.dwarf2/dw2-var-zero-addr.exp * gdb.dwarf2/dw4-sig-types.exp * gdb.dwarf2/dwz.exp * gdb.dwarf2/dynarr-ptr.exp * gdb.dwarf2/enum-type.exp * gdb.dwarf2/gdb-index.exp * gdb.dwarf2/implptr-64bit.exp * gdb.dwarf2/implptr-optimized-out.exp * gdb.dwarf2/implptr.exp * gdb.dwarf2/implref-array.exp * gdb.dwarf2/implref-const.exp * gdb.dwarf2/implref-global.exp * gdb.dwarf2/implref-struct.exp * gdb.dwarf2/mac-fileno.exp * gdb.dwarf2/main-subprogram.exp * gdb.dwarf2/member-ptr-forwardref.exp * gdb.dwarf2/method-ptr.exp * gdb.dwarf2/missing-sig-type.exp * gdb.dwarf2/nonvar-access.exp * gdb.dwarf2/opaque-type-lookup.exp * gdb.dwarf2/pieces-optimized-out.exp * gdb.dwarf2/pieces.exp * gdb.dwarf2/pr10770.exp * gdb.dwarf2/pr13961.exp * gdb.dwarf2/staticvirtual.exp * gdb.dwarf2/subrange.exp * gdb.dwarf2/symtab-producer.exp * gdb.dwarf2/trace-crash.exp * gdb.dwarf2/typeddwarf.exp * gdb.dwarf2/valop.exp * gdb.dwarf2/watch-notconst.exp * gdb.fortran/array-element.exp * gdb.fortran/charset.exp * gdb.fortran/common-block.exp * gdb.fortran/complex.exp * gdb.fortran/derived-type-function.exp * gdb.fortran/derived-type.exp * gdb.fortran/logical.exp * gdb.fortran/module.exp * gdb.fortran/multi-dim.exp * gdb.fortran/nested-funcs.exp * gdb.fortran/print-formatted.exp * gdb.fortran/subarray.exp * gdb.fortran/vla-alloc-assoc.exp * gdb.fortran/vla-datatypes.exp * gdb.fortran/vla-history.exp * gdb.fortran/vla-ptr-info.exp * gdb.fortran/vla-ptype-sub.exp * gdb.fortran/vla-ptype.exp * gdb.fortran/vla-sizeof.exp * gdb.fortran/vla-type.exp * gdb.fortran/vla-value-sub-arbitrary.exp * gdb.fortran/vla-value-sub-finish.exp * gdb.fortran/vla-value-sub.exp * gdb.fortran/vla-value.exp * gdb.fortran/whatis_type.exp * gdb.go/chan.exp * gdb.go/handcall.exp * gdb.go/hello.exp * gdb.go/integers.exp * gdb.go/methods.exp * gdb.go/package.exp * gdb.go/strings.exp * gdb.go/types.exp * gdb.go/unsafe.exp * gdb.guile/scm-arch.exp * gdb.guile/scm-block.exp * gdb.guile/scm-breakpoint.exp * gdb.guile/scm-cmd.exp * gdb.guile/scm-disasm.exp * gdb.guile/scm-equal.exp * gdb.guile/scm-frame-args.exp * gdb.guile/scm-frame-inline.exp * gdb.guile/scm-frame.exp * gdb.guile/scm-iterator.exp * gdb.guile/scm-math.exp * gdb.guile/scm-objfile.exp * gdb.guile/scm-ports.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-symtab.exp * gdb.guile/scm-value-cc.exp * gdb.guile/types-module.exp * gdb.linespec/break-ask.exp * gdb.linespec/cpexplicit.exp * gdb.linespec/explicit.exp * gdb.linespec/keywords.exp * gdb.linespec/linespec.exp * gdb.linespec/ls-dollar.exp * gdb.linespec/ls-errs.exp * gdb.linespec/skip-two.exp * gdb.linespec/thread.exp * gdb.mi/mi-async.exp * gdb.mi/mi-basics.exp * gdb.mi/mi-break.exp * gdb.mi/mi-catch-load.exp * gdb.mi/mi-cli.exp * gdb.mi/mi-cmd-param-changed.exp * gdb.mi/mi-console.exp * gdb.mi/mi-detach.exp * gdb.mi/mi-disassemble.exp * gdb.mi/mi-eval.exp * gdb.mi/mi-file-transfer.exp * gdb.mi/mi-file.exp * gdb.mi/mi-fill-memory.exp * gdb.mi/mi-inheritance-syntax-error.exp * gdb.mi/mi-linespec-err-cp.exp * gdb.mi/mi-logging.exp * gdb.mi/mi-memory-changed.exp * gdb.mi/mi-read-memory.exp * gdb.mi/mi-record-changed.exp * gdb.mi/mi-reg-undefined.exp * gdb.mi/mi-regs.exp * gdb.mi/mi-return.exp * gdb.mi/mi-reverse.exp * gdb.mi/mi-simplerun.exp * gdb.mi/mi-solib.exp * gdb.mi/mi-stack.exp * gdb.mi/mi-stepi.exp * gdb.mi/mi-syn-frame.exp * gdb.mi/mi-until.exp * gdb.mi/mi-var-block.exp * gdb.mi/mi-var-child.exp * gdb.mi/mi-var-cmd.exp * gdb.mi/mi-var-cp.exp * gdb.mi/mi-var-display.exp * gdb.mi/mi-var-invalidate.exp * gdb.mi/mi-var-list-children-invalid-grandchild.exp * gdb.mi/mi-vla-fortran.exp * gdb.mi/mi-watch.exp * gdb.mi/mi2-var-child.exp * gdb.mi/user-selected-context-sync.exp * gdb.modula2/unbounded-array.exp * gdb.multi/dummy-frame-restore.exp * gdb.multi/multi-arch-exec.exp * gdb.multi/multi-arch.exp * gdb.multi/tids.exp * gdb.multi/watchpoint-multi.exp * gdb.opencl/callfuncs.exp * gdb.opencl/convs_casts.exp * gdb.opencl/datatypes.exp * gdb.opencl/operators.exp * gdb.opencl/vec_comps.exp * gdb.opt/clobbered-registers-O2.exp * gdb.opt/inline-break.exp * gdb.opt/inline-bt.exp * gdb.opt/inline-cmds.exp * gdb.opt/inline-locals.exp * gdb.pascal/case-insensitive-symbols.exp * gdb.pascal/floats.exp * gdb.pascal/gdb11492.exp * gdb.python/lib-types.exp * gdb.python/py-arch.exp * gdb.python/py-as-string.exp * gdb.python/py-bad-printers.exp * gdb.python/py-block.exp * gdb.python/py-breakpoint-create-fail.exp * gdb.python/py-breakpoint.exp * gdb.python/py-caller-is.exp * gdb.python/py-cmd.exp * gdb.python/py-explore-cc.exp * gdb.python/py-explore.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-finish-breakpoint2.exp * gdb.python/py-frame-args.exp * gdb.python/py-frame-inline.exp * gdb.python/py-frame.exp * gdb.python/py-framefilter-mi.exp * gdb.python/py-infthread.exp * gdb.python/py-lazy-string.exp * gdb.python/py-linetable.exp * gdb.python/py-mi-events.exp * gdb.python/py-mi-objfile.exp * gdb.python/py-mi.exp * gdb.python/py-objfile.exp * gdb.python/py-pp-integral.exp * gdb.python/py-pp-maint.exp * gdb.python/py-pp-re-notag.exp * gdb.python/py-pp-registration.exp * gdb.python/py-recurse-unwind.exp * gdb.python/py-strfns.exp * gdb.python/py-symbol.exp * gdb.python/py-symtab.exp * gdb.python/py-sync-interp.exp * gdb.python/py-typeprint.exp * gdb.python/py-unwind-maint.exp * gdb.python/py-unwind.exp * gdb.python/py-value-cc.exp * gdb.python/py-xmethods.exp * gdb.reverse/amd64-tailcall-reverse.exp * gdb.reverse/break-precsave.exp * gdb.reverse/break-reverse.exp * gdb.reverse/consecutive-precsave.exp * gdb.reverse/consecutive-reverse.exp * gdb.reverse/finish-precsave.exp * gdb.reverse/finish-reverse-bkpt.exp * gdb.reverse/finish-reverse.exp * gdb.reverse/fstatat-reverse.exp * gdb.reverse/getresuid-reverse.exp * gdb.reverse/i386-precsave.exp * gdb.reverse/i386-reverse.exp * gdb.reverse/i386-sse-reverse.exp * gdb.reverse/i387-env-reverse.exp * gdb.reverse/i387-stack-reverse.exp * gdb.reverse/insn-reverse.exp * gdb.reverse/machinestate-precsave.exp * gdb.reverse/machinestate.exp * gdb.reverse/next-reverse-bkpt-over-sr.exp * gdb.reverse/pipe-reverse.exp * gdb.reverse/readv-reverse.exp * gdb.reverse/recvmsg-reverse.exp * gdb.reverse/rerun-prec.exp * gdb.reverse/s390-mvcle.exp * gdb.reverse/step-precsave.exp * gdb.reverse/step-reverse.exp * gdb.reverse/time-reverse.exp * gdb.reverse/until-precsave.exp * gdb.reverse/until-reverse.exp * gdb.reverse/waitpid-reverse.exp * gdb.reverse/watch-precsave.exp * gdb.reverse/watch-reverse.exp * gdb.rust/generics.exp * gdb.rust/methods.exp * gdb.rust/modules.exp * gdb.rust/simple.exp * gdb.server/connect-with-no-symbol-file.exp * gdb.server/ext-attach.exp * gdb.server/ext-restart.exp * gdb.server/ext-wrapper.exp * gdb.server/file-transfer.exp * gdb.server/server-exec-info.exp * gdb.server/server-kill.exp * gdb.server/server-mon.exp * gdb.server/wrapper.exp * gdb.stabs/exclfwd.exp * gdb.stabs/gdb11479.exp * gdb.threads/clone-new-thread-event.exp * gdb.threads/corethreads.exp * gdb.threads/current-lwp-dead.exp * gdb.threads/dlopen-libpthread.exp * gdb.threads/gcore-thread.exp * gdb.threads/sigstep-threads.exp * gdb.threads/watchpoint-fork.exp * gdb.trace/actions-changed.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/circ.exp * gdb.trace/collection.exp * gdb.trace/disconnected-tracing.exp * gdb.trace/ftrace.exp * gdb.trace/mi-trace-frame-collected.exp * gdb.trace/mi-trace-unavailable.exp * gdb.trace/mi-traceframe-changed.exp * gdb.trace/mi-tsv-changed.exp * gdb.trace/no-attach-trace.exp * gdb.trace/passc-dyn.exp * gdb.trace/qtro.exp * gdb.trace/range-stepping.exp * gdb.trace/read-memory.exp * gdb.trace/save-trace.exp * gdb.trace/signal.exp * gdb.trace/status-stop.exp * gdb.trace/tfile.exp * gdb.trace/trace-break.exp * gdb.trace/trace-buffer-size.exp * gdb.trace/trace-condition.exp * gdb.trace/tracefile-pseudo-reg.exp * gdb.trace/tstatus.exp * gdb.trace/unavailable.exp * gdb.trace/while-dyn.exp * gdb.trace/while-stepping.exp
2016-12-23Fix incorrect reference to source filesLuis Machado3-3/+8
gdb/gdbserver/ChangeLog: 2016-12-23 Luis Machado <lgustavo@codesourcery.com> * win32-i386-low.c: Fix incorrect reference to a couple source files. * nto-x86-low.c: Likewise.
2016-12-23Bump gold version number to 1.14.Cary Coutant3-1/+24
* NEWS: Add new features in 1.14. * version.cc (version_string): Bump to 1.14.
2016-12-24Call target specific add_symbols functionAlan Modra2-1/+6
This allows targets that have target specific code to add object symbols to make use of the generic archive handling. * linker.c (generic_link_check_archive_element): Call target bfd_link_add_symbols to add element symbols.
2016-12-24Remove "collect" forms of generic linker add symbols functionsAlan Modra4-102/+31
Nothing calls them and they were in the way of a bug fix. * linker.c (generic_link_add_symbols): Delete. Merge into.. (_bfd_generic_link_add_symbols): ..here. (generic_link_check_archive_element_no_collect): Delete. (generic_link_check_archive_element_collect): Likewise. (generic_link_add_object_symbols): Remove "collect" param. Update callers. (generic_link_add_symbol_list): Likewise. (generic_link_check_archive_element): Likewise. Call bfd_link_add_symbols rather than generic_link_add_object_symbols. * libbfd-in.h (_bfd_generic_link_add_symbols_collect): Delete. * libbfd.h: Regenerate.
2016-12-23hppa-linux-gnu-ranlib: libcpp.a: File format not recognizedAlan Modra4-20/+12
This stops an --enable-targets selection affecting the main target in regards to forcing 64-bit archives. It also means mips64 and s390x will revert to binutils-2.25 and binutils-2.26 behaviour of not forcing 64-bit archives at least in the common case when plugins were enabled. PR binutils/20464 PR binutils/14625 * configure.ac: Revert 2016-05-25 configure change setting want_64_bit_archive for mips64 and s390x. Revise USE_64_BIT_ARCHIVE description. * configure: Regenerate. * config.in: Regenerate.
2016-12-23Updated email address.Bernhard Heckel1-1/+1
2016-12-23 Bernhard Heckel <bernhard.heckel@intel.com> gdb/Changelog: * MAINTAINERS (Write After Approval): Updated email address. Change-Id: I46b81392c2bd4b04e8e2aea2bb4bef2d0b509d24
2016-12-23[msp430] Sync tc-msp430.c with devices.csvJoe Seymour2-6/+10
This patch syncs the generated data structure in tc-msp430.c with the latest version of devices.csv released by TI. My understanding is that the devices being removed were "invalid spins", so can't be being used by anyone, and never will be. Current web searches related to these devices return no relevant results. Built and tested (no regressions) as follows: Configured with: --target=msp430-elf --disable-gdb Test variations: msp430-sim/-mcpu=msp430 msp430-sim/-mcpu=msp430x msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either msp430-sim/-mhwmult=none msp430-sim/-mhwmult=f5series gas/ * config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's devices.csv file as of September 2016.
2016-12-23Bump version to 2.28.51Tristan Gingold13-61/+86
bfd/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * version.m4: Bump version to 2.28.51 * configure: Regenerate. binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gprof/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. opcodes/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * configure: Regenerate.
2016-12-23Add marker in NEWS filesTristan Gingold7-0/+19
binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28.
2016-12-23Regenerate pot files.Tristan Gingold12-7291/+10505
2016-12-22Add -z bndplt support (for Intel MPX).Cary Coutant11-25/+788
gold/ PR gold/17643 * options.h (-z bndplt): New option. * x86_64.cc (Output_data_plt_x86_64::regular_count): New method. (Output_data_plt_x86_64::address_for_global): Move implementation into virtual method. (Output_data_plt_x86_64::address_for_local): Likewise. (Output_data_plt_x86_64::got): New method. (Output_data_plt_x86_64::got_plt): New method. (Output_data_plt_x86_64::got_irelative): New method. (Output_data_plt_x86_64::do_address_for_global): New virtual method. (Output_data_plt_x86_64::do_address_for_local): New virtual method. (class Output_data_plt_x86_64_bnd): New class. (Target_x86_64::do_make_data_plt): Move out of line and specialize for each size (both overloads). (Output_data_plt_x86_64::set_final_data_size): Cosmetic changes. * testsuite/Makefile.am (bnd_plt_1): New test case. (bnd_ifunc_1): New test case. (bnd_ifunc_2): New test case. * testsuite/Makefile.in: Regenerate. * testsuite/bnd_ifunc_1.s: New source file. * testsuite/bnd_ifunc_1.sh: New shell script. * testsuite/bnd_ifunc_2.s: New source file. * testsuite/bnd_ifunc_2.sh: New shell script. * testsuite/bnd_plt_1.s: New source file. * testsuite/bnd_plt_1.sh: New shell script.
2016-12-22Fix placement of forced local symbols in the dynamic symbol table.Cary Coutant8-97/+220
Gold was not placing forced-local symbols (e.g., hidden visibility) at the front of the dynamic symbol table, or including them in the count of local symbols recorded in the .dynsym section's sh_info field. gold/ * layout.cc (Layout::finalize): Track count of forced-local symbols in .dynsym. (Layout::create_symtab_sections): Add local_dynamic_count parameter; use that instead of sh_info value. (Layout::create_dynamic_symtab): Add pforced_local_dynamic_count parameter; pass it to Symtab::set_dynsym_indexes(). Include forced locals in sh_info value. Pass index of first real global to Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table(). * layout.h (Layout::create_symtab_sections): Add local_dynamic_count parameter. (Layout::create_dynamic_symtab): Add pforced_local_dynamic_count parameter. * symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count parameter. Process forced-local symbols first and return the count. (Symbol_table::finalize): Update comments. * symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count parameter. (Symbol_table::first_dynamic_global_index_): Update comment. (Symbol_table::dynamic_count_): Update comment. * testsuite/Makefile.am (ifuncmod1.sh): New test case. * testsuite/Makefile.in: Regenerate. * testsuite/ifuncmod1.sh: New shell script.
2016-12-22Fix problem where version script causes predefined hidden symbol to be ↵Cary Coutant6-26/+90
defined twice. When creating a predefined hidden symbol like _GLOBAL_OFFSET_TABLE_, gold was incorrectly letting a version script add a version to the symbol, resulting in two copies of the symbol, both STB_LOCAL, but one of which was grouped in the globals part of the symbol table. gold/ * symtab.cc (Symbol_table::define_special_symbol): Add is_forced_local parameter; if set, do not check version script. (Symbol_table::do_define_in_output_data): Pass is_forced_local for STB_LOCAL predefined symbols. (Symbol_table::do_define_in_output_segment): Likewise. (Symbol_table::do_define_in_output_segment): Likewise. (Symbol_table::do_define_as_constant): Likewise. * symtab.h (Symbol_table::define_special_symbol): Add is_forced_local parameter. Adjust all callers. * testsuite/Makefile.am (ver_test_8.sh): New test case. * testsuite/Makefile.in: Regenerate. * ver_test_8.sh: New test script.
2016-12-22infrun.c (set_step_over_info): Add comment.Doug Evans2-1/+7
gdb/ChangeLog: * infrun.c (set_step_over_info): Add comment.
2016-12-22New syntax for mt print symbols,msymbols,psymbols.Doug Evans8-195/+422
gdb/ChangeLog: * NEWS: Document new syntax for "mt print symbols", "mt print psymbols" and "mt print msymbols" commands. * psymtab.c (DEV_TTY): Delete. (dump_psymtab_addrmap): Don't dump if psymtabs_addrmap is NULL. (maintenance_print_psymbols): Rewrite for new syntax: mt print psymbols [-objfile objfile] [-pc address] [outfile] mt print psymbols [-objfile objfile] [-source source] [outfile] (_initialize_psymtab): Update help text. * symmisc.c (maintenance_print_symbols): Rewrite for new syntax: mt print symbols [-pc address] [outfile] mt print symbols [-objfile objfile] [-source source] [outfile] (maintenance_print_msymbols): Rewrite for new syntax: mt print msymbols [-objfile objfile] [outfile] Only print symbols for the current progspace. (_initialize_symmisc): Update help text. gdb/doc/ChangeLog: * gdb.texinfo (Symbols): Update docs for symbol printing maintenance commands. gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Update tests for maint print symbols, psymbols and msymbols.
2016-12-22Class-ify ui_outSimon Marchi64-2377/+2341
This patch finalizes the C++ conversion of the ui-out subsystem, by turning the ui_out and ui_out_impl structures into a single class hierarchy. ui_out functions are turned into virtual methods of that new class, so as a result there are a lot of call sites to update. In the previous version of the patchset, there were separate ui_out and ui_out_impl classes, but it wasn't really useful and added boilerplate. In this version there is simply an ui_out base class that is extended for CLI, TUI and MI. It's a bit hard to maintain a ChangeLog for such a big patch, I did my best but I'm sure there are some missing or outdated info in there... gdb/ChangeLog: * ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header, ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int, ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream, ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text, ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags, ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect): Remove, replace with a method in class ui_out. (table_begin_ftype): Remove, replace with pure virtual method in class ui_out. (table_body_ftype): Likewise. (table_end_ftype): Likewise. (table_header_ftype): Likewise. (ui_out_begin_ftype): Likewise. (ui_out_end_ftype): Likewise. (field_int_ftype): Likewise. (field_skip_ftype): Likewise. (field_string_ftype): Likewise. (field_fmt_ftype): Likewise. (spaces_ftype): Likewise. (text_ftype): Likewise. (message_ftype): Likewise. (wrap_hint_ftype): Likewise. (flush_ftype): Likewise. (redirect_ftype): Likewise. (data_destroy_ftype): Likewise. (struct ui_out_impl): Remove, replace with class ui_out. (ui_out_new): Remove. (class ui_out): New class. * ui-out.c (struct ui_out): Remove, replaced with class ui_out. (current_level): Remove, replace with ui_out method. (push_level): Likewise. (pop_level): Likewise. (uo_table_begin, uo_table_body, uo_table_end, uo_table_header, uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt, uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush, uo_redirect, uo_field_string): Remove. (ui_out_table_begin): Replace with ... (ui_out::table_begin): ... this. (ui_out_table_body): Replace with ... (ui_out::table_body): ... this. (ui_out_table_end): Replace with ... (ui_out::table_end): ... this. (ui_out_table_header): Replace with ... (ui_out::table_header): ... this. (ui_out_begin): Replace with ... (ui_out::begin): ... this. (ui_out_end): Replace with ... (ui_out::end): ... this. (ui_out_field_int): Replace with ... (ui_out::field_int): ... this. (ui_out_field_fmt_int): Replace with ... (ui_out::field_fmt_int): ... this. (ui_out_field_core_addr): Replace with ... (ui_out::field_core_addr): ... this. (ui_out_field_stream): Replace with ... (ui_out::field_stream): ... this. (ui_out_field_skip): Replace with ... (ui_out::field_skip): ... this. (ui_out_field_string): Replace with ... (ui_out::field_string): ... this. (ui_out_field_fmt): Replace with ... (ui_out::field_fmt): ... this. (ui_out_spaces): Replace with ... (ui_out::spaces): ... this. (ui_out_text): Replace with ... (ui_out::text): ... this. (ui_out_message): Replace with ... (ui_out::message): ... this. (ui_out_wrap_hint): Replace with ... (ui_out::wrap_hint): ... this. (ui_out_flush): Replace with ... (ui_out::flush): ... this. (ui_out_redirect): Replace with ... (ui_out::redirect): ... this. (ui_out_test_flags): Replace with ... (ui_out::test_flags): ... this. (ui_out_is_mi_like_p): Replace with ... (ui_out::is_mi_like_p): ... this. (verify_field): Replace with ... (ui_out::verify_field): ... this. (ui_out_query_field): Replace with ... (ui_out::query_table_field): ... this. (ui_out_data): Remove. (ui_out_new): Remove, replace with ... (ui_out::ui_out): ... this constructor. (do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end, do_cleanup_end, make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end): Update fallouts of struct ui_out -> class ui_out change. * cli-out.c (cli_out_data): Remove. (cli_uiout_dtor): Remove. (cli_table_begin): Replace with ... (cli_ui_out::do_table_begin): ... this new method. (cli_table_body): Replace with ... (cli_ui_out::do_table_body): ... this new method. (cli_table_end): Replace with ... (cli_ui_out::do_table_end): ... this new method. (cli_table_header): Replace with ... (cli_ui_out::do_table_header): ... this new method. (cli_begin): Replace with ... (cli_ui_out::do_begin): ... this new method. (cli_end): Replace with ... (cli_ui_out::do_end): ... this new method. (cli_field_int): Replace with ... (cli_ui_out::do_field_int): ... this new method. (cli_field_skip): Replace with ... (cli_ui_out::do_field_skip): ... this new method. (cli_field_string): Replace with ... (cli_ui_out::do_field_string): ... this new method. (cli_field_fmt): Replace with ... (cli_ui_out::do_field_fmt): ... this new method. (cli_spaces): Replace with ... (cli_ui_out::do_spaces): ... this new method. (cli_text): Replace with ... (cli_ui_out::do_text): ... this new method. (cli_message): Replace with ... (cli_ui_out::do_message): ... this new method. (cli_wrap_hint): Replace with ... (cli_ui_out::do_wrap_hint): ... this new method. (cli_flush): Replace with ... (cli_ui_out::do_flush): ... this new method. (cli_redirect): Replace with ... (cli_ui_out::do_redirect): ... this new method. (out_field_fmt): Replace with ... (cli_ui_out::out_field_fmt): ... this new method. (field_separator): Replace with ... (cli_ui_out::field_separator): ... this new method. (cli_out_set_stream): Replace with ... (cli_ui_out::set_stream): ... this new method. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_ui_out_impl::cli_ui_out_impl): New constructor. (cli_ui_out_impl::~cli_ui_out_impl): New destructor. (cli_out_new): Change return type to cli_ui_out *, instantiate a cli_ui_out. * cli-out.h (cli_ui_out_data): Remove, replace with class cli_ui_out. (class cli_ui_out): New class. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_out_new): Change return type to cli_ui_out*. (cli_out_set_stream): Remove. * cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type to cli_ui_out*. (cli_interpreter_resume): Adapt. (cli_interpreter_exec): Adapt. * mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove. (mi_ui_out_impl): Remove. (mi_table_begin): Replace with ... (mi_ui_out::do_table_begin): ... this. (mi_table_body): Replace with ... (mi_ui_out::do_table_body): ... this. (mi_table_end): Replace with ... (mi_ui_out::do_table_end): ... this. (mi_table_header): Replace with ... (mi_ui_out::do_table_header): ... this. (mi_begin): Replace with ... (mi_ui_out::do_begin): ... this. (mi_end): Replace with ... (mi_ui_out::do_end): ... this. (mi_field_int): Replace with ... (mi_ui_out::do_field_int): ... this. (mi_field_skip): Replace with ... (mi_ui_out::do_field_skip): ... this. (mi_field_string): Replace with ... (mi_ui_out::do_field_string): ... this. (mi_field_fmt): Replace with ... (mi_ui_out::do_field_fmt): ... this. (mi_spaces): Replace with ... (mi_ui_out::do_spaces): ... this. (mi_text): Replace with ... (mi_ui_out::do_text): ... this. (mi_message): Replace with ... (mi_ui_out::do_message): ... this. (mi_wrap_hint): Replace with ... (mi_ui_out::do_wrap_hint): ... this. (mi_flush): Replace with ... (mi_ui_out::do_flush): ... this. (mi_redirect): Replace with ... (mi_ui_out::do_redirect): (field_separator): Replace with ... (mi_ui_out::field_separator): (mi_open): Replace with ... (mi_ui_out::open): ... this. (mi_close): Replace with ... (mi_ui_out::close): ... this. (mi_out_rewind): Replace with ... (mi_ui_out::rewind): ... this. (mi_out_put): Replace with ... (mi_ui_out::put): ... this. (mi_version): Replace with ... (mi_ui_out::version): ... this. (mi_out_data_ctor): Replace with ... (mi_ui_out::mi_ui_out): ... this. (mi_out_data_dtor): Replace with ... (mi_ui_out::~mi_ui_out): ... this. (mi_out_new): Change return type to mi_ui_out*, instantiate an mi_ui_out object. (as_mi_ui_out): New function. (mi_version): Update fallouts of struct ui_out to class ui_out transition. (mi_out_put): Likewise. (mi_out_rewind): Likewise. * mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*. * tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl): Remove. (tui_field_int): Replace with ... (tui_ui_out::do_field_int): ... this. (tui_field_string): Replace with ... (tui_ui_out::do_field_string): ... this. (tui_field_fmt): Replace with ... (tui_ui_out::do_field_fmt): ... this. (tui_text): Replace with ... (tui_ui_out::do_text): ... this. (tui_out_new): Change return type to tui_ui_out*, instantiate tui_ui_out object. (tui_ui_out::tui_ui_out): New. * tui/tui-out.h: New file. * tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h. * tui/tui-io.c: Include tui/tui-out.h. (tui_old_uiout): Change type to cli_ui_out*. (tui_setup_io): Use dynamic_cast. * tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*. * tui/tui-interp.c (tui_resume): Adapt. * ada-lang.c (print_it_exception): Update fallouts of struct ui_out to class ui_out transition. (print_one_exception): Likewise. (print_mention_exception): Likewise. * ada-tasks.c (print_ada_task_info): Likewise. (info_task): Likewise. (task_command): Likewise. * auto-load.c (print_script): Likewise. (auto_load_info_scripts): Likewise. (info_auto_load_cmd): Likewise. * break-catch-sig.c (signal_catchpoint_print_one): Likewise. * break-catch-syscall.c (print_it_catch_syscall): Likewise. (print_one_catch_syscall): Likewise. * break-catch-throw.c (print_it_exception_catchpoint): Likewise. (print_one_exception_catchpoint): Likewise. (print_one_detail_exception_catchpoint): Likewise. (print_mention_exception_catchpoint): Likewise. * breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise. (print_solib_event): Likewise. (watchpoint_check): Likewise. (wrap_indent_at_field): Likewise. (print_breakpoint_location): Likewise. (output_thread_groups): Likewise. (print_one_breakpoint_location): Likewise. (breakpoint_1): Likewise. (default_collect_info): Likewise. (watchpoints_info): Likewise. (print_it_catch_fork): Likewise. (print_one_catch_fork): Likewise. (print_it_catch_vfork): Likewise. (print_one_catch_vfork): Likewise. (print_it_catch_solib): Likewise. (print_one_catch_solib): Likewise. (print_it_catch_exec): Likewise. (print_one_catch_exec): Likewise. (mention): Likewise. (print_it_ranged_breakpoint): Likewise. (print_one_ranged_breakpoint): Likewise. (print_one_detail_ranged_breakpoint): Likewise. (print_mention_ranged_breakpoint): Likewise. (print_it_watchpoint): Likewise. (print_mention_watchpoint): Likewise. (print_it_masked_watchpoint): Likewise. (print_one_detail_masked_watchpoint): Likewise. (print_mention_masked_watchpoint): Likewise. (bkpt_print_it): Likewise. (tracepoint_print_one_detail): Likewise. (tracepoint_print_mention): Likewise. (update_static_tracepoint): Likewise. (tracepoints_info): Likewise. (save_breakpoints): Likewise. * cli/cli-cmds.c (complete_command): Likewise. * cli/cli-logging.c (set_logging_redirect): Likewise. (pop_output_files): Likewise. (handle_redirections): Likewise. * cli/cli-script.c (print_command_lines): Likewise. * cli/cli-setshow.c (do_show_command): Likewise. (cmd_show_list): Likewise. * cp-abi.c (list_cp_abis): Likewise. (show_cp_abi_cmd): Likewise. * darwin-nat-info.c (darwin_debug_regions_recurse): Likewise. * disasm.c (gdb_pretty_print_insn): Likewise. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. * gdb_bfd.c (print_one_bfd): Likewise. (maintenance_info_bfds): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise. * i386-tdep.c (i386_mpx_print_bounds): Likewise. * infcmd.c (run_command_1): Likewise. (print_return_value_1): Likewise. * inferior.c (print_selected_inferior): Likewise. (print_inferior): Likewise. * infrun.c (print_end_stepping_range_reason): Likewise. (print_signal_exited_reason): Likewise. (print_exited_reason): Likewise. (print_signal_received_reason): Likewise. (print_no_history_reason): Likewise. * interps.c (interp_set): Likewise. * linespec.c (decode_line_full): Likewise. * linux-thread-db.c (info_auto_load_libthread_db): Likewise. * mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise. (mi_cmd_env_path): Likewise. (mi_cmd_env_dir): Likewise. (mi_cmd_inferior_tty_show): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise. (print_partial_file_name): Likewise. (mi_cmd_file_list_exec_source_files): Likewise. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise. (mi_cmd_info_gdb_mi_command): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise. (mi_cmd_stack_list_args): Likewise. (list_arg_or_local): Likewise. * mi/mi-cmd-var.c (print_varobj): Likewise. (mi_cmd_var_create): Likewise. (mi_cmd_var_delete): Likewise. (mi_cmd_var_set_format): Likewise. (mi_cmd_var_show_format): Likewise. (mi_cmd_var_info_num_children): Likewise. (mi_cmd_var_list_children): Likewise. (mi_cmd_var_info_type): Likewise. (mi_cmd_var_info_path_expression): Likewise. (mi_cmd_var_info_expression): Likewise. (mi_cmd_var_show_attributes): Likewise. (mi_cmd_var_evaluate_expression): Likewise. (mi_cmd_var_assign): Likewise. (varobj_update_one): Likewise. * mi/mi-interp.c (as_mi_interp): Likewise. (mi_on_normal_stop_1): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_modified): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (mi_user_selected_context_changed): Likewise. * mi/mi-main.c (print_one_inferior): Likewise. (output_cores): Likewise. (list_available_thread_groups): Likewise. (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (output_register): Likewise. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_list_features): Likewise. (mi_cmd_list_target_features): Likewise. (mi_cmd_add_inferior): Likewise. (mi_execute_command): Likewise. (mi_load_progress): Likewise. (print_variable_or_computed): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise. * osdata.c (info_osdata_command): Likewise. * probe.c (gen_ui_out_table_header_info): Likewise. (print_ui_out_not_applicables): Likewise. (print_ui_out_info): Likewise. (info_probes_for_ops): Likewise. (enable_probes_command): Likewise. (disable_probes_command): Likewise. * progspace.c (print_program_space): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. * python/py-framefilter.c (py_print_type): Likewise. (py_print_value): Likewise. (py_print_single_arg): Likewise. (enumerate_args): Likewise. (enumerate_locals): Likewise. (py_print_args): Likewise. (py_print_frame): Likewise. * record-btrace.c (btrace_ui_out_decode_error): Likewise. (btrace_call_history_insn_range): Likewise. (btrace_call_history_src_line): Likewise. (btrace_call_history): Likewise. * remote.c (show_remote_cmd): Likewise. * skip.c (skip_info): Likewise. * solib.c (info_sharedlibrary_command): Likewise. * source.c (print_source_lines_base): Likewise. * spu-tdep.c (info_spu_event_command): Likewise. (info_spu_signal_command): Likewise. (info_spu_mailbox_list): Likewise. (info_spu_dma_cmdlist): Likewise. (info_spu_dma_command): Likewise. (info_spu_proxydma_command): Likewise. * stack.c (print_stack_frame): Likewise. (print_frame_arg): Likewise. (read_frame_arg): Likewise. (print_frame_args): Likewise. (print_frame_info): Likewise. (print_frame): Likewise. * symfile.c (load_progress): Likewise. (generic_load): Likewise. (print_transfer_performance): Likewise. * thread.c (do_captured_list_thread_ids): Likewise. (print_thread_info_1): Likewise. (restore_selected_frame): Likewise. (do_captured_thread_select): Likewise. (print_selected_thread_frame): Likewise. * top.c (execute_command_to_string): Likewise. * tracepoint.c (tvariables_info_1): Likewise. (trace_status_mi): Likewise. (tfind_1): Likewise. (print_one_static_tracepoint_marker): Likewise. (info_static_tracepoint_markers_command): Likewise. * utils.c (do_ui_out_redirect_pop): Likewise. (fputs_maybe_filtered): Likewise.
2016-12-22Don't call "error" in sysroot-prefix.expAlan Modra2-3/+8
We don't want to report a test failure as a tcl error. * testsuite/ld-scripts/sysroot-prefix.exp (sysroot_prefix_test_setup): Call perror rather than error on "as" or "ar" failures.
2016-12-21Make linker-created symbols relocatable where appropriate.Cary Coutant4-2/+19
Linker-created symbols like __ehdr_start, __etext, __edata, and end should be relocatable, not absolute. gold/ * output.cc (Output_segment::first_section): Return NULL if there are no sections in the segment. * output.h (Output_segment::first_section_load_address): Assert that first section is not NULL. * symtab.cc (Symbol_table::sized_write_globals): Attach linker-created segment-relative symbols to first section of the segment.
2016-12-22Automatic date update in version.inGDB Administrator1-1/+1
2016-12-21Fix bugs with float compare and Inf operands.Jim Wilson4-0/+184
sim/aarch64/ * simulator.c (set_flags_for_float_compare): Add code to handle Inf. Add comment to document NaN issue. (set_flags_for_double_compare): Likewise. sim/testsuite/sim/aarch64/ * fcmp.s: New.
2016-12-22Don't make_bfd_vms_lib archive functions NULLAlan Modra3-16/+31
Contrary to the comment, they can in fact be called. * libbfd-in.h (_bfd_vms_lib_slurp_armap): Use _bfd_noarchive function. (_bfd_vms_lib_slurp_extended_name_table: Likewise. (_bfd_vms_lib_construct_extended_name_table: Likewise. (_bfd_vms_lib_truncate_arname: Likewise. (_bfd_vms_lib_write_armap: Likewise. (_bfd_vms_lib_read_ar_hdr: Likewise. (_bfd_vms_lib_write_ar_hdr: Likewise. * libbfd.h: Regenerate.
2016-12-22ChangeLog formatting fixesAlan Modra2-3/+3
2016-12-22Support aligning text section from odd addressesAndrew Waterman2-6/+21
Previously, the alignment directives were not correctly supported in the text section when current alignment was only 1 byte (i.e., when the address was odd). Since there are no 1-byte instructions in RISC-V, this patch resolves the bug by writing a zero byte to obtain 2-byte alignment, at which point a 2-byte NOP can be used to obtain 4-byte alignment. Resolves https://github.com/riscv/riscv-gnu-toolchain/issues/205 * config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs. (riscv_frag_align_code): Correct frag_align_code arg.
2016-12-22Fix a const-safety issue on GCC-4.9 and aboveTim Newsome2-1/+6
* config/tc-riscv.c (riscv_pre_output_hook): Remove const from loc4_frag.
2016-12-22Avoid creating symbol table entries for registersAndrew Waterman2-2/+6
Instructions like "jal t0, foo" were erroneously creating symbol table entries for t0 as well as foo, which causes linking problems. Fix by reordering instruction alternatives so that t0 is first attempted to be parsed as a register, rather than as a symbol. * riscv-opc.c (riscv_opcodes): Reorder jal and call entries.
2016-12-22Do not add padding if an output section is marked as ignoredIgor Kudrin2-1/+7
* ldlang.c (size_input_section): Avoid calling insert_pad if output_section_statement->ignored is set.
2016-12-21bfd: aarch64: fix word and arrdess size declaration in ilp32 modeYury Norov2-4/+11
ILP32 has 32-bit word and address, but currently they declared as 64-bit in bfd_aarch64_arch_ilp32, which breaks further logic of bfd. This patch fixes it. Glibc testsuite build with patched binutils shows that next tests stop to fail: iconvdata/mtrace-tst-loading iconvdata/tst-loading iconvdata/tst-tables localedata/mtrace-tst-leaks localedata/tst-leaks posix/tst-getaddrinfo4 posix/tst-getaddrinfo5 posix/tst-regex2
2016-12-21Remove high bit set charactersAlan Modra10-22/+40
gas/ * doc/c-lm32.texi: Fix chars with high bit set. * testsuite/gas/bfin/vector2.s: Likewise. gold/ * arm.cc: Fix comment chars with high bit set. include/ * coff/pe.h: Fix comment chars with high bit set. * opcode/xgate.h: Likewise. ld/ * testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
2016-12-21Document character escape sequencesAlan Modra2-6/+12
PR gas/10946 * doc/as.texinfo (Chars): Document escape sequences.
2016-12-21Automatic date update in version.inGDB Administrator1-1/+1
2016-12-20gdb: Constify solib_findPedro Alves5-9/+22
gdb/ChangeLog: 2016-12-20 Pedro Alves <palves@redhat.com> * nto-tdep.c (nto_find_and_open_solib): Constify 'solib' parameter. * nto-tdep.h (nto_find_and_open_solib): Constify 'solib' parameter. * solib.c (solib_find_1, exec_file_find, solib_find): Constify in_pathname' parameter. * solist.h (struct target_so_ops) <find_and_open_solib>: Constify 'soname' parameter. (exec_file_find, solib_find): Constify 'in_pathname' parameter.
2016-12-20Fix longjmp across readline w/ --enable-sjlj-exceptions toolchainsPedro Alves2-5/+27
Nowadays, GDB propagates C++ exceptions across readline using setjmp/longjmp 89525768cd08 ("Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH") because DWARF-based unwinding can't cross C functions compiled without -fexceptions (see details from the commit above). Unfortunately, toolchains that use SjLj-based C++ exceptions got broken with that fix, because _Unwind_SjLj_Unregister, which is put at the exit of a function, is not executed due to the longjmp added by that commit. (gdb) [New Thread 2936.0xb80] kill Thread 1 received signal SIGSEGV, Segmentation fault. 0x03ff662b in ?? () top?bt 15 #0 0x03ff662b in ?? () #1 0x00526b92 in stdin_event_handler (error=0, client_data=0x172ed8) at ../../binutils-gdb/gdb/event-top.c:555 #2 0x00525a94 in handle_file_event (ready_mask=<optimized out>, file_ptr=0x3ff5cb8) at ../../binutils-gdb/gdb/event-loop.c:733 #3 gdb_wait_for_event (block=block@entry=1) at ../../binutils-gdb/gdb/event-loop.c:884 #4 0x00525bfb in gdb_do_one_event () at ../../binutils-gdb/gdb/event-loop.c:347 #5 0x00525ce5 in start_event_loop () at ../../binutils-gdb/gdb/event-loop.c:371 #6 0x0051fada in captured_command_loop (data=0x0) at ../../binutils-gdb/gdb/main.c:324 #7 0x0051cf5d in catch_errors ( func=func@entry=0x51fab0 <captured_command_loop(void*)>, func_args=func_args@entry=0x0, errstring=errstring@entry=0x7922bf <VEC_interp_factory_p_quick_push(VEC_inte rp_factory_p*, interp_factory*, char const*, unsigned int)::__PRETTY_FUNCTION__+351> "", mask=mask@entry=RETURN_MASK_ALL) at ../../binutils-gdb/gdb/exceptions.c:236 #8 0x00520f0c in captured_main (data=0x328feb4) at ../../binutils-gdb/gdb/main.c:1149 #9 gdb_main (args=args@entry=0x328feb4) at ../../binutils-gdb/gdb/main.c:1159 #10 0x0071e400 in main (argc=1, argv=0x171220) at ../../binutils-gdb/gdb/gdb.c:32 Fix this by making the functions involved in setjmp/longjmp as noexcept, so that the compiler knows it doesn't need to emit the _Unwind_SjLj_Register / _Unwind_SjLj_Unregister calls for C++ exceptions. Tested on x86_64 Fedora 23 with: - GCC 5.3.1 w/ DWARF-based exceptions. - GCC 7 built with --enable-sjlj-exceptions. gdb/ChangeLog: 2016-12-20 Pedro Alves <palves@redhat.com> Yao Qi <yao.qi@linaro.org> PR gdb/20977 * event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New noexcept function, factored out from ... (gdb_rl_callback_read_char_wrapper): ... this. (gdb_rl_callback_handler): Mark noexcept.
2016-12-20Set emacs default mode for the GDB directory to C++Antoine Tremblay3-1/+18
Since GDB has switched to C++ but the file names are still .c emacs does not load the proper mode when opening files in the gdb directory. This patch fixes that by enabling c++ mode. This patch also fixes indentation tweaks as discussed in this thread: https://sourceware.org/ml/gdb-patches/2016-12/msg00074.html Indent with gdb-code-style.el included and the .dir-locals.el is as such: namespace TestNameSpace { class test { public: test test() {} int m_a; }; struct teststruct { int a; } } gdb/ChangeLog: * .dir-locals.el: Set c++ mode for the directory and set indent properly. * gdb-code-style.el: Set c-set-offset 'innamespace as a safe value to be used in .dir-locals.el.
2016-12-20MIPS16/opcodes: Respect ISA and ASE in disassemblyMaciej W. Rozycki19-2/+1698
Limit MIPS16 instruction disassembly according to the ISA level and ASE set selected, as with the regular MIPS and microMIPS instruction sets. Retain the property of `objdump -m mips:16' disassembling all MIPS16 instructions however, regardless of any ISA level recorded in the binary examined. To validate the disassembler use the GAS test suite for its convenience of running tests across multiple ISAs, even though placing the tests in the binutils test suite would be more appropriate. Adjust the single binutils test which depends on 64-bit instruction disassembly to have the ISA level required actually recorded in the binary examined. opcodes/ * mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry. (print_insn_mips16): Check opcode entries for validity against the ISA level and ASE set selected. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module' rather than `.set' to set the ISA level. gas/ * testsuite/gas/mips/mips16-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-sub.d: New test. * testsuite/gas/mips/mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-sub.s: New test source. * testsuite/gas/mips/mips16e-sub.s: New test source. * testsuite/gas/mips/mips16e-64-sub.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-20MIPS/GAS/testsuite: Add RESTORE instruction to `mips16e' testMaciej W. Rozycki3-1/+8
Add a RESTORE instruction smoke test to the `mips16e' GAS test. gas/ * testsuite/gas/mips/mips16e.s: Add a RESTORE instruction. * testsuite/gas/mips/mips16e.d: Adjust accordingly.
2016-12-20MIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAsMaciej W. Rozycki24-167/+1990
Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro', `mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16 ISAs. gas/ * testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16-64.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16e-64.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16-macro.d: Adjust test for multiple MIPS16 ISA testing. * testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation. * testsuite/gas/mips/mips16e-64.l: Rename to... * testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this. * testsuite/gas/mips/mips16-64@mips16.d: New test. * testsuite/gas/mips/mips16-64@mips16-64.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro.d: New test. * testsuite/gas/mips/mips16-64@mips16-macro.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64', `mips16-macro', `mips16-macro-t', `mips16-macro-e' and `mips16e-64' testing across multiple MIPS16 ISAs. Fold `mips16-macro' and `mips16e-64' list test invocations into corresponding dump tests.
2016-12-20MIPS/GAS/testsuite: Implement individual MIPS16 ISA testingMaciej W. Rozycki6-7/+177
Implement individual MIPS16 ISA GAS testing for the 32-bit and 64-bit variants of the base MIPS16 and the MIPS16e ISA each. gas/ * testsuite/gas/mips/mips.exp (run_dump_test_arch): Add `mips16e' and `mips16' prefixes. (run_list_test_arch): Likewise. Rename `mips16' architecture to `mips16-32'. Add `mips16-64', `mips16e-32' and `mips16e-64' architectures. Update `rol64', `mips16e', `elf${el}-rel2' and `elf-rel4' test invocations accordingly. * testsuite/gas/mips/mips16e@branch-swap-3.d: New test. * testsuite/gas/mips/mips16e@branch-swap-4.d: New test. * testsuite/gas/mips/mips16e@loc-swap-dis.d: New test. * testsuite/gas/mips/mips16e@loc-swap.d: New test.
2016-12-20MIPS/GAS/testsuite: Fix trailing padding in `loc-swap.s'Maciej W. Rozycki5-4/+11
Pad alignment with zeros rather than NOP instructions, for sensible multi-ISA MIPS16 testing. gas/ * testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for trailing alignment padding. * testsuite/gas/mips/loc-swap.d: Adjust accordingly. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise.
generated by cgit v1.1 at 2025-01-10 07:15:03 +0000