| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR tui/14126 notes that ANSI terminal escape sequences don't affect
the colors shown in the TUI. A simple way to see this is to try the
extended-prompt example from the gdb manual.
Curses does not pass escape sequences through to the terminal.
Instead, it replaces non-printable characters with a visible
representation, for example "^[" for the ESC character.
This patch fixes the problem by adding a simple ANSI terminal sequence
parser to gdb. These sequences are decoded and those that are
recognized are turned into the appropriate curses calls.
The curses approach to color handling is unusual and so there are some
oddities in the implementation.
Standard curses has no notion of the default colors of the terminal.
So, if you set the foreground color, it is not possible to reset it --
you have to pick some other color. ncurses provides an extension to
handle this, so this patch updates configure and uses it when
available.
Second, in curses, colors always come in pairs: you cannot set just
the foreground. This patch handles this by tracking actually-used
pairs of colors and keeping a table of these for reuse.
Third, there are a limited number of such pairs available. In this
patch, if you try to use too many color combinations, gdb will just
ignore some color changes.
Finally, in addition to limiting the number of color pairs, curses
also limits the number of colors. This means that, when using
extended 8- or 24-bit color sequences, it may be possible to exhaust
the curses color table.
I am very sour on the curses design now.
I do not know how to write a test for this, so I did not.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
PR tui/14126:
* tui/tui.c (tui_enable): Call start_color and
use_default_colors.
* tui/tui-io.c (struct color_pair): New.
(color_pair_map, last_color_pair, last_style): New globals.
(tui_setup_io): Clean up color map when shutting down.
(curses_colors): New constant.
(get_color_pair, apply_ansi_escape): New functions.
(tui_write): Rewrite.
(tui_puts_internal): New function, from tui_puts. Add "height"
parameter.
(tui_puts): Use tui_puts_internal.
(tui_redisplay_readline): Use tui_puts_internal.
(_initialize_tui_io): New function.
(color_map): New globals.
(get_color): New function.
* configure.ac: Check for use_default_colors.
* config.in, configure: Rebuild.
|
|
This changes gdb to style addresses.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <ADDRESS>: New
constant.
* ui-out.c (ui_out::field_core_addr): Add styling.
* stack.c (print_frame): Add styling.
* printcmd.c (print_address): Add styling.
(print_address_demangle, info_address_command): Likewise.
* cli/cli-style.h (address_style): Declare.
* cli/cli-style.c (address_style): New global.
(_initialize_cli_style): Register new commands.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Update test to check for address styling.
|
|
The "Reading symbols" message does not use ui-out (perhaps it
should?), so this styles it using the low-level API.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Style file name.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for styling of "Reading symbols"
message.
|
|
This changes gdb to style the welcome message that is shown by
default. The styling is only done interactively.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* top.c (print_gdb_version): Style gdb version number.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for version number styling.
|
|
print_address_symbolic does not use ui-out, so it did not style
function names. This patch changes it to use the low-level style code
directly.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* printcmd.c (print_address_symbolic): Style function name.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for print_address_symbolic.
|
|
say_where does not use ui-out, so function and file names printed by
it were not styled. This patch changes say_where to use the low-level
style code directly.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* breakpoint.c (say_where): Style file name.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for breakpoint setting.
|
|
This adds style support for variable names. For the time being, this
is only done in backtraces, not in ptype or print; those places do not
use ui-out and so would need ad hoc changes.
This also adds styling to the names printed for local variables in
"backtrace full". This code does not use ui-out, so the styling is
done using the low-level API.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <VARIABLE>: New global.
* stack.c (print_frame_arg): Style name.
* printcmd.c (print_variable_and_value): Style variable name.
* cli/cli-style.h (variable_name_style): Declare.
* cli/cli-style.c (variable_name_style): New global.
(_initialize_cli_style): Update.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for variable names.
|
|
This adds a function that can be used to reset terminal styles,
regardless of what style the low-level output routines currently think
is applied.
This is used to make "echo" and "printf" work properly when emitting
ANSI terminal escapes -- now gdb will reset the style at the end of
the command.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (reset_terminal_style): Declare.
* utils.c (can_emit_style_escape): New function.
(set_output_style): Use it.
(reset_terminal_style): New function.
* printcmd.c (printf_command): Call reset_terminal_style.
* cli/cli-cmds.c (echo_command): Call reset_terminal_style.
|
|
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
|
|
This changes the gdb test suite to set TERM to "dumb" by default.
This setting disables terminal styling, so that the existing tests do
not need to be updated.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* lib/gdb.exp (gdb_init): Set the TERM environment variable to
"dumb".
* gdb.base/readline.exp (operate_and_get_next): Save and restore
the TERM environment variable.
|
|
This introduces the new ui_file_style class and various helpers. This
class represents a terminal style and provides methods for parsing and
emitting the corresponding ANSI terminal escape sequences.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* unittests/style-selftests.c: New file.
* ui-style.c: New file.
* ui-style.h: New file.
* ui-file.h: Include ui-style.h.
* Makefile.in (COMMON_SFILES): Add ui-style.c.
(HFILES_NO_SRCDIR): Add ui-style.h.
(SUBDIR_UNITTESTS_SRCS): Add style-selftests.c.
|
|
This adds a "context" argument to add_setshow_enum_cmd. Now
add_setshow_enum_cmd will call set_cmd_context on both of the new
commands. This is used in a later patch.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* command.h (add_setshow_enum_cmd): Add "context" argument.
* cli/cli-decode.c (add_setshow_enum_cmd): Add "context"
argument. Call set_cmd_context.
|
|
Currently wrap buffering is implemented by allocating a string that is
the same width as the window, and then writing characters into it.
However, if gdb emits terminal escapes, then these could possibly
overflow the buffer.
To prevent this, change the wrap buffer to be a std::string and update
the various uses.
This also changes utils.c to always emit characters to the wrap
buffer. This simplifies future patches which emit terminal escape
sequences, and also makes it possible for the "echo" and "printf"
commands to be used to emit terminal escapes and have these work in
the TUI.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.c (filter_initialized): New global.
(wrap_buffer): Now a std::string.
(wrap_pointer): Remove.
(flush_wrap_buffer): New function.
(filtered_printing_initialized, set_width, wrap_here)
(fputs_maybe_filtered): Update.
|
|
In the tests
py-pp-registration/gdb.log
default/gdb.log
foll-fork/gdb.log
setshow/gdb.log
break-interp/gdb.log
Valgrind detects a leak of the doc strings for the set and show verbose cmd.
Here is the stacktrace of the leaked set doc:
==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120
==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==25548== by 0x409C27: xmalloc (common-utils.c:44)
==25548== by 0x778AF9: xstrdup (xstrdup.c:34)
==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495)
==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593)
==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768)
==25548== by 0x69EED3: initialize_all_files() (init.c:365)
==25548== by 0x658A84: gdb_init(char*) (top.c:2163)
==25548== by 0x5403E1: captured_main_1 (main.c:863)
==25548== by 0x5403E1: captured_main (main.c:1167)
==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193)
==25548== by 0x289CA7: main (gdb.c:32)
The leak is created by top.c set_verbose 'elaborate joke':
the doc string is changed according to the verbosity:
(gdb) help set verbose
Set verbosity.
(gdb) set verbose on
(gdb) help set verbose
Set verbose printing of informational messages.
(gdb)
set_verbose creates the leak as it replaces the string allocated in
the above stacktrace by a static (non translated) string:
...
if (info_verbose)
{
c->doc = "Set verbose printing of informational messages.";
...
Also, this can possibly trigger a call to 'free' of a static string,
as c->doc_allocated is kept true, while the string is not allocated anymore.
This patch:
* fixes the leak by freeing the previous docs if doc_allocated.
* internationalize the messages.
* properly sets doc_allocated to 0 once doc strings are static.
gdb/ChangeLog
2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* top.c (set_verbose): Free previous docs if doc_allocated.
Internationalize messages. Set doc_allocated to 0.
|
|
When one steps with "next" past the 'main's 'return' statement
in MinGW programs built by mingw.org's tools, PC lands in a
function whose symbol is not in any symtab. GDB then looks
up the nearest symbol, and should find none, because all those
with addresses below PC are not real functions. Having
unresolved symbols, whose address is zero, in minsyms tricked
GDB into using these bogus symbols, which then caused
assertion violation and internal_error. See the discussion at
https://sourceware.org/ml/gdb-patches/2018-12/msg00176.html
for more details.
gdb/ChangeLog
2018-12-28 Eli Zaretskii <eliz@gnu.org>
* coffread.c (coff_symtab_read): Don't record in minsyms symbols
that are unresolved. This avoids triggering an internal error
when stepping outside of 'main' in MinGW programs.
|
|
Commit 2bf2bf23da exposed a bug on targets that create common sections
other than the standard ELF SHN_COMMON. If these are output by ld -r,
then their type becomes SHT_PROGBITS unless the target handles them
specially (eg. by elf_backend_special_sections), and if they are
merged into .bss/.sbss by ld -r then that section becomes SHT_PROGBITS.
Worse, if they are output by ld -r, then their size is increased by
bfd_generic_define_common_symbol during final link, which leads to
bogus file contents being copied to output.
For mips, it seems to me that the .scommon section should not be
output for ld -r, but I haven't made that change in this patch.
PR 24015
* elf.c (bfd_elf_get_default_section_type): Make common sections
SHT_NOBITS.
* linker.c (bfd_generic_define_common_symbol): Clear
SEC_HAS_CONTENTS.
|
|
PR 23966
* libbfd.c (SSIZE_MAX): Define.
(bfd_malloc, bfd_realloc): Don't cast size to long to check for
"negative" values, compare against SSIZE_MAX instead.
|
|
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if
available. Apparently MacOS Mojave defines int64_t as long long even
though long is also 64 bits, which confuses the logic selecting
PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on
Mojave.
PR 24028
include/
* opcode/ppc.h (PPC_INT_FMT): Delete.
opcodes/
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
|
|
|
|
A while back I typed "info pretty-printers" with a large number of
printers installed, and I typed "q" to stop the pagination. I noticed
that gdb printed a Python exception in this case.
It seems to me that, instead, quitting pagination (or control-c'ing a
Python command generally) should be handled the same way that gdb
normally handles a quit.
This patch implements this idea by changing gdbpy_handle_exception to
treat PyExc_KeyboardInterrupt specially.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/py-utils.c (gdbpy_handle_exception): Translate
PyExc_KeyboardInterrupt to quit.
gdb/testsuite/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add
pagination test.
|
|
A few places in the Python code would either call gdbpy_print_stack,
or throw a gdb "quit", depending on the pending exception. This patch
consolidates these into a helper function.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/python-internal.h (gdbpy_print_stack_or_quit): Declare.
* python/py-unwind.c (pyuw_sniffer): Use
gdbpy_print_stack_or_quit.
* python/py-framefilter.c (throw_quit_or_print_exception):
Remove.
(gdbpy_apply_frame_filter): Use gdbpy_print_stack_or_quit.
* python/python.c (gdbpy_print_stack_or_quit): New function.
|
|
I noticed a few places were converting a gdb exception to a Python
exception "by hand". It's better to use the existing
gdbpy_convert_exception helper function, as this handles memory errors
correctly, and in the future may be enhanced in other ways.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/py-value.c (convert_value_from_python): Use
gdbpy_convert_exception.
* python/py-param.c (parmpy_init): Use gdbpy_convert_exception.
* python/py-cmd.c (cmdpy_init): Use gdbpy_convert_exception.
* python/py-breakpoint.c (bppy_init): Use
gdbpy_convert_exception.
|
|
This moves the various "nat" object files into the nat/ subdirectory.
This allows for the removal of a pattern rule from the gdb Makefile,
which is a small cleanup.
I made the configure.nat change in a (semi-) automated way, hopefully
meaning that it is more likely to be correct than had I done it by
hand.
Eventually I would like for the various configure scripts to only
mention source files, and let the Makefile compute the object file
names.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* configure.nat (NATDEPFILES): Use nat/ prefix.
* Makefile.in (CONFIG_SRC_SUBDIR): Add nat.
(%.o: ${srcdir}/nat/%.c): Remove rule.
(INIT_FILES): Do not filter out NATDEPFILES.
|
|
I noticed that init.c depends on the object files that go into gdb.
Because init.c actually only requires the contents of the
corresponding source files, this unnecessarily serializes the step
that builds init.c.
This patch changes gdb's Makefile to make init.c depend on the source
files. This also simplifies the rule to build init.c.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* Makefile.in (INIT_FILES): Redefine.
(stamp-init): Remove sed, tr invocations. Use for loop. Don't
set LANG or LC_ALL.
|
|
The rule to make init.c has a special case for gdbtypes, with a long
explanatory comment. All of this is obsolete, as the globals referred
to by the comment no longer exist. This patch simplifies the rule.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* Makefile.in (stamp-init): Remove gdbtypes special case.
|
|
gdb/ChangeLog:
* config/i386/nm-fbsd.h: Remove file.
* Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-fbsd.h.
* configure.nat: Remove NAT_FILE for FreeBSD/i386.
|
|
This changes minimal_symbol_reader to use DISABLE_COPY_AND_ASSIGN,
rather than the manual approach it currently uses.
Tested by rebuilding.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* minsyms.h (class minimal_symbol_reader): Use
DISABLE_COPY_AND_ASSIGN.
|
|
This changes the Python code to remove some more calls to xfree, in
favor of self-managing data structures.
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/python.c (python_interactive_command): Use std::string.
(gdbpy_parameter): Likewise.
* python/py-utils.c (unicode_to_encoded_string): Update comment.
* python/py-symtab.c (salpy_str): Use PyString_FromFormat.
* python/py-record-btrace.c (recpy_bt_insn_data): Use
byte_vector.
* python/py-objfile.c (objfpy_get_build_id): Use
unique_xmalloc_ptr.
* python/py-inferior.c (infpy_read_memory): Use
unique_xmalloc_ptr.
* python/py-cmd.c (gdbpy_parse_command_name): Use std::string.
|
|
The test fails due to conflict between var 'next' and s-pooloc.adb next:
(gdb) print next(1)
Multiple matches for next
[0] cancel
[1] pack.next (integer) return integer at /bd/home/philippe/gdb/git/binutils-gdb/gdb/testsuite/gdb.ada/fun_renaming/pack.adb:19
[2] system.pool_local.next (system.address) return system.pool_local.acc_address at s-pooloc.adb:151
> FAIL: gdb.ada/fun_renaming.exp: print next(1) (timeout)
Fix by making the names and renamings more unique.
gdb/testsuite/ChangeLog
2018-12-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/fun_renaming/pack.ads (Next): Rename to Fun_Rename_Test_Next.
(Renamed_Next): Rename to Renamed_Fun_Rename_Test_Next.
gdb.ada/fun_renaming/pack.adb (Next): Rename to Fun_Rename_Test_Next.
gdb.ada/fun_renaming/fun_renaming.adb (N): Rename to Fun_Rename_Test_N.
gdb.ada/fun_renaming.exp: Update accordingly.
|
|
The test fails (timeout) due to conflict between var 'input' and s-ststop.adb 'input':
(gdb) print input.u2 := (0.25,0.5,0.75)
Multiple matches for input
[0] cancel
[1] system.strings.stream_ops.storage_array_ops.input (access ada.streams.root_stream_type; system.strings.stream_ops.io_kind; natural) return system.storage_elements.storage_array at s-ststop.adb:127
[2] system.strings.stream_ops.stream_element_array_ops.input (access ada.streams.root_stream_type; system.strings.stream_ops.io_kind; natural) return ada.streams.stream_element_array at s-ststop.adb:127
[3] system.strings.stream_ops.string_ops.input (access ada.streams.root_stream_type; system.strings.stream_ops.io_kind; natural) return string at s-ststop.adb:127
[4] system.strings.stream_ops.wide_string_ops.input (access ada.streams.root_stream_type; system.strings.stream_ops.io_kind; natural) return wide_string at s-ststop.adb:127
[5] system.strings.stream_ops.wide_wide_string_ops.input (access ada.streams.root_stream_type; system.strings.stream_ops.io_kind; natural) return wide_wide_string at s-ststop.adb:127
[6] target_wrapper.input at /bd/home/philippe/gdb/git/info_t/gdb/testsuite/gdb.ada/assign_arr/target_wrapper.ads:24
> FAIL: gdb.ada/assign_arr.exp: print input.u2 := (0.25,0.5,0.75) (timeout)
gdb/testsuite/ChangeLog
2018-12-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/assign_arr/target_wrapper.ads (Input): Rename to
Assign_Arr_Input.
main_p324_051.adb: Update accordingly.
gdb.ada/assign_arr.exp: Likewise.
|
|
With old compilers, the test fails because no debug info is generated
for 'B' and GDB finds some 'b' in atnat.h:
(gdb) print b
Multiple matches for b
[0] cancel
[1] b at ../sysdeps/ieee754/dbl-64/atnat.h:106
[2] b at ../sysdeps/ieee754/dbl-64/atnat.h:106
[3] b at ../sysdeps/ieee754/dbl-64/atnat.h:106
> FAIL: gdb.ada/rename_subscript_param.exp: print b before changing its value (timeout)
Avoid the timeout by renaming 'b' to rename_subscript_param_b.
Also, change 'before' to 'after' in the gdb_test message that prints
the value after changing it.
The test still fails with old compilers that do not properly
generate debug info for this renaming:
(gdb) print rename_subscript_param_b
No definition of "rename_subscript_param_b" in current context.
(gdb) FAIL: gdb.ada/rename_subscript_param.exp: print rename_subscript_param_b before changing its value
Note: if the compiler would generate the correct debug info, the test should
succeed with the name B. However, waiting for this fix, changing the name
ensures that the test fails directly, instead of causing a timeout.
2018-12-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
PR ada/23381
* gdb.ada/rename_subscript_param/pkg.adb (B): Rename to
Rename_Subscript_Param_B. All users updated.
gdb.ada/rename_subscript_param.exp: Test names made unique.
Note that PR ada/23381 is only fully fixed when using a recent
compiler.
|
|
The test gdb.ada/packed_array_assign fails due to conflict between component 'w'
and system.dim.mks.w:
(gdb) print pra := ((x => 2, y => 0, w => 17), pr, (x => 7, y => 1, w => 23))
Unknown component name: system.dim.mks.w.
(gdb) FAIL: gdb.ada/packed_array_assign.exp: print pra := ((x => 2, y => 0, w => 17), pr, (x => 7, y => 1, w => 23))
Also, depending on the compiler version, the component w might be reordered
and placed before components x and y.
So, change the component order in the source, so that both an old
compiler (GNATMAKE 6.3.0, gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516)
and a new compiler (GNATMAKE Pro 20.0w (20181210-82), based on gcc 8.2.1)
produce the same component order (checked by using -gnatR3s).
So, update to test the new (more unique) names in the source order.
2018-12-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/packed_array_assign/aggregates.ads (Packed_Rec):
Rename components to Packed_Array_Assign_[X|Y|W]. Place
component Packed_Array_Assign_W as first component, to ensure
old and new compilers have the same representation.
All users updated.
|
|
I get this when compiling with a gcc 6.3.0-based cross-compiler:
CXX target.o
/home/simark/src/binutils-gdb/gdb/target.c: In static member function 'static void target_terminal::restore_inferior()':
/home/simark/src/binutils-gdb/gdb/target.c:396:10: error: types may not be defined in a for-range-declaration [-Werror]
for (struct inferior *inf : all_inferiors ())
^~~~~~
Accomodate it by dropping the unnecessary struct keyword. Actually, I used
"::inferior", otherwise it resolves to the inferior method of the
target_terminal class.
gdb/ChangeLog:
* target.c (target_terminal::restore_inferior): Remove struct keyword.
|
|
|
|
"set debug separate-debug-file" shows which candidates are considered,
when trying to find separate debug info. But it's not clear if GDB used
a certain candidate, and if not, why not. This patch adds some
precision:
Before:
Looking for separate debug info (debug link) for /lib/x86_64-linux-gnu/libc.so.6
Trying /lib/x86_64-linux-gnu/libc-2.23.so
Trying /lib/x86_64-linux-gnu/.debug/libc-2.23.so
Trying /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.23.so
After:
Looking for separate debug info (debug link) for /lib/x86_64-linux-gnu/libc.so.6
Trying /lib/x86_64-linux-gnu/libc-2.23.so... no, same file as the objfile.
Trying /lib/x86_64-linux-gnu/.debug/libc-2.23.so... no, unable to open.
Trying /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.23.so... yes!
gdb/ChangeLog:
* build-id.c (build_id_to_debug_bfd): Enhance debug output.
* symfile.c (separate_debug_file_exists): Likewise.
|
|
|
|
|
|
The 64-bit RISC-V target currently models the floating point registers
as having the following type:
union riscv_double
{
builtin_type_ieee_single float;
builtin_type_ieee_double double;
}
Notice the choice of names for the fields of this struct, possibly not
ideal choices, as these are not valid field names in C. However, this
type is only ever defined within GDB (or in the target description),
and no restriction seems to exist on the field names in that case.
The problem though is that currently:
(gdb) info registers $ft0
ft0 {float = 0, double = 0} (raw 0x0000000000000000)
(gdb) p $ft0.float
$1 = 0
(gdb) p $ft0.double
A syntax error in expression, near `double'.
We can access the 'float' field, but not the 'double' field. This is
because the string 'double' is handled differently to the string
'float' in c-exp.y.
In both cases the string '$ft0' is parsed as a VARIABLE expression.
In the 'float' case, the string 'float' becomes a generic NAME token
in 'lex_one_token', which then allows the rule "exp '.' name" to match
and the field name lookup to occur.
The 'double' case is different. In order to allow parsing of the type
string 'long double', the 'double' string becomes the token
DOUBLE_KEYWORD. At this point there's no rule to match "exp '.'
DOUBLE_KEYWORD", so we can never lookup the field named 'double'.
We could rename the fields for RISC-V, and maybe that would be the
best solution. However, its not hard to allow for fields named
'double', which is what this patch does.
A new case is added to the 'field_name' rule to match the
DOUBLE_KEYWORD, and create a suitable 'struct stoken'. With this done
the "exp '.' field_name" pattern can now match, and we can lookup the
double field.
With this patch in place I now see this behaviour:
(gdb) info registers $ft0
ft0 {float = 0, double = 0} (raw 0x0000000000000000)
(gdb) p $ft0.float
$1 = 0
(gdb) p $ft0.double
$2 = 0
I've gone ahead and handled INT_KEYWORD, LONG, SHORT, SIGNED_KEYWORD,
and UNSIGNED as well within field_name.
I've added a new test for this functionality.
This change was tested on x86-64 GNU/Linux with no regressions.
gdb/ChangeLog:
* c-exp.y (field_name): Allow DOUBLE_KEYWORD, INT_KEYWORD, LONG,
SHORT, SIGNED_KEYWORD, and UNSIGNED tokens to act as a field
names.
(typename_stoken): New function.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-unusual-field-names.c: New file.
* gdb.dwarf2/dw2-unusual-field-names.exp: New file.
|
|
Introduces a new rule in c-exp.y for matching structure field names.
This is a restructure in preparation for the next commit, this commit
shouldn't result in any user visible changes.
gdb/ChangeLog:
* c-exp.y (field_name): New %token, and new rule.
(exp): Replace uses of 'name' with 'field_name' where appropriate.
|
|
In an attempt to fix PR gdb/13368 this commit adds some comments to
c-exp.y which hopefully makes the type parsing code a little clearer.
There are no code changes here, so there should be no user visible
changes after this commit.
gdb/ChangeLog:
PR gdb/13368
* c-exp.y (typebase): Extend the comment.
(ident_tokens): Likewise.
|
|
In an earlier patch discussion we noticed that
dwarf2_find_containing_comp_unit takes the address of sect_off, but
doesn't actually need to. This is a leftover from before
C++-ification. This patch simplifies the function.
Tested using gdb.dwarf2 on x86-64 Fedora 28.
gdb/ChangeLog
2018-12-18 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_find_containing_comp_unit): Don't take
address of sect_off.
|
|
s-dimmks.ads 'A'.
The test fails (timeout) due to:
(gdb) PASS: gdb.ada/bp_fun_addr.exp: break *a'address
run
Starting program: /bd/home/philippe/gdb/git/build_info_t/gdb/testsuite/outputs/gdb.ada/bp_fun_addr/a
Multiple matches for a
[0] cancel
[1] a at /bd/home/philippe/gdb/git/info_t/gdb/testsuite/gdb.ada/bp_fun_addr/a.adb:18
[2] system.dim.mks.a at s-dimmks.ads:115
> FAIL: gdb.ada/bp_fun_addr.exp: run until breakpoint at a'address (timeout)
testcase /home/philippe/gdb/git/build_info_t/gdb/testsuite/../../../info_t/gdb/testsuite/gdb.ada/bp_fun_addr.exp completed in 10 seconds
Fix this by using a fun name that has more chances to be unique.
2018-12-24 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/bp_fun_addr/a.adb (a): Rename to bp_fun_addr.
Filename a.adb changed to bp_fun_addr.adb.
gdb.ada/bp_fun_addr.exp: Update test accordingly.
|
|
|
|
Remove the unused bfd pointer argument of elf_i386_rtype_to_howto.
* elf32-i386.c (elf_i386_rtype_to_howto): Remove the unused bfd
pointer argument.
(elf_i386_info_to_howto_rel): Updated.
(elf_i386_tls_transition): Likewise.
(elf_i386_relocate_section): Likewise.
|
|
gdb/ChangeLog:
GDB 8.2.1 released.
|
|
|
|
The existing code for reading and writing the return value can
overflow the passed in buffers in a couple of situations. This commit
aims to resolve these issues.
The problems were detected using valgrind, here are two examples,
first from gdb.base/structs.exp:
(gdb) p/x fun9()
==31353== Invalid write of size 8
==31353== at 0x4C34153: memmove (vg_replace_strmem.c:1270)
==31353== by 0x632EBB: memcpy (string_fortified.h:34)
==31353== by 0x632EBB: readable_regcache::raw_read(int, unsigned char*) (regcache.c:538)
==31353== by 0x659D3F: riscv_return_value(gdbarch*, value*, type*, regcache*, unsigned char*, unsigned char const*) (riscv-tdep.c:2593)
==31353== by 0x583641: get_call_return_value (infcall.c:448)
==31353== by 0x583641: call_thread_fsm_should_stop(thread_fsm*, thread_info*) (infcall.c:546)
==31353== by 0x59BBEC: fetch_inferior_event(void*) (infrun.c:3883)
==31353== by 0x53890B: check_async_event_handlers (event-loop.c:1064)
==31353== by 0x53890B: gdb_do_one_event() [clone .part.4] (event-loop.c:326)
==31353== by 0x6CA34B: wait_sync_command_done() (top.c:503)
==31353== by 0x584653: run_inferior_call (infcall.c:621)
...
And from gdb.base/call-sc.exp:
(gdb) advance fun
fun () at /gdb/gdb/testsuite/gdb.base/call-sc.c:41
41 return foo;
(gdb) finish
==1968== Invalid write of size 8
==1968== at 0x4C34153: memmove (vg_replace_strmem.c:1270)
==1968== by 0x632EBB: memcpy (string_fortified.h:34)
==1968== by 0x632EBB: readable_regcache::raw_read(int, unsigned char*) (regcache.c:538)
==1968== by 0x659D01: riscv_return_value(gdbarch*, value*, type*, regcache*, unsigned char*, unsigned char const*) (riscv-tdep.c:2576)
==1968== by 0x5891E4: get_return_value(value*, type*) (infcmd.c:1640)
==1968== by 0x5892C4: finish_command_fsm_should_stop(thread_fsm*, thread_info*) (infcmd.c:1808)
==1968== by 0x59BBEC: fetch_inferior_event(void*) (infrun.c:3883)
==1968== by 0x53890B: check_async_event_handlers (event-loop.c:1064)
==1968== by 0x53890B: gdb_do_one_event() [clone .part.4] (event-loop.c:326)
==1968== by 0x6CA34B: wait_sync_command_done() (top.c:503)
...
There are a couple of problems with the existing code, that are all
related.
In riscv_call_arg_struct we incorrectly rounded up the size of a
structure argument. This is unnecessary, and caused GDB to read too
much data into the output buffer when extracting a struct return
value.
In fixing this it became clear that we were incorrectly assuming that
any value being placed in a register (or read from a register) would
always access the entire register. This is not true, for example a
9-byte struct on a 64-bit target places 8-bytes in one registers and
1-byte in a second register (assuming available registers). To handle
this I switch from using cooked_read to cooked_read_part.
Finally, when processing basic integer return value types these are
extended to xlen sized types and then passed in registers. We
currently don't handle this type expansion in riscv_return_value, but
we do in riscv_push_dummy_call. The result is that small integer
types (like char) result in a full xlen sized register being written
into the output buffer, which results in buffer overflow. To address
this issue we now create a value of the expanded type and use this
values contents buffer to hold the return value before casting the
value down to the smaller expected type.
This patch resolves all of the valgrind issues I have found so far,
and causes no regressions. Tested against RV32/64 with and without
floating point support.
gdb/ChangeLog:
* riscv-tdep.c (riscv_call_arg_struct): Don't adjust size before
assigning locations.
(riscv_return_value): Take more care not to read/write outside of
argument buffer. Cast return value between the declared type and
the abi type.
|
|
We should save and restore the floating point status registers. This
became an issue when testing 32-bit float on a target with 64-bit with
the gdb.base/callfuncs.exp test.
gdb/ChangeLog:
* riscv-tdep.c (riscv_register_reggroup_p): Save and restore fcsr,
fflags, and frm registers.
|
|
Provide a mapping between GDB's register numbers and DWARF's register
numbers. This resolves some failures that I was seeing on
gdb.base/store.exp when running on an rv64imfdc target.
gdb/ChangeLog:
* riscv-tdep.c (riscv_dwarf_reg_to_regnum): New function.
(riscv_gdbarch_init): Register new function with gdbarch.
* riscv-tdep.h: New enum to define RISC-V DWARF register numbers.
|
|
While discussing this issue:
https://sourceware.org/ml/gdb-patches/2018-12/threads.html#00082
I added a printf gated by "set debug symtab-create" to be able to
quickly see all minimal symbols recorded by GDB. I thought it would be
useful to have it built-in, for the future. Here's how the output
looks:
Recording minsym: mst_data 0x400780 15 _IO_stdin_used
Recording minsym: mst_text 0x400700 13 __libc_csu_init
Recording minsym: mst_bss 0x601058 25 _end
gdb/ChangeLog:
* minsyms.c (mst_str): New.
(minimal_symbol_reader::record_full): Add debug output.
|
