aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-23x86: TLS desc call relocs target zero-size fieldsJan Beulich3-2/+9
These are marker relocations, so together with their bit size being zero their byte size should be zero as well. This is expressed by a value of 3, not 0.
2021-04-23x86-64: special case LEA when determining signedness of displacementJan Beulich2-8/+24
LEA behavior without a 64-bit destination is independent of address size - in particular LEA with 32-bit addressing and 64-bit destination is the same as LEA with 64-bit addressing and 32-bit destination. IOW checking merely i.prefix[ADDR_PREFIX] is insufficient. This also means wrong relocation types (R_X86_64_32S when R_X86_64_32 is needed) were used so far in such cases. Note that in one case in build_modrm_byte() the 64-bit check came too early altogether, and hence gets dropped in favor of the one included in the new helper. This is benign to non-64-bit code from all I can tell, but the failure to clear disp16 could have been a latent problem.
2021-04-23x86-64: defer 32-bit signed displacement checkJan Beulich2-19/+34
In preparation for extending the conditions here defer this check until operands have been parsed, as certain further attributes will need to be known for determinig applicability of this check to be correct to LEA.
2021-04-23x86: re-order optimize_disp()Jan Beulich2-16/+23
While I can't point out any specific case where things break, it looks wrong to have the consumer of a flag before its producer. Set .disp32 first, then do the possible conversion to signed 32-bit, and finally check whether the value fits in a signed long.
2021-04-23x86: don't truncate values in diagnostics and alikeJan Beulich2-4/+9
Truncating an expression's X_add_number to just "long" can result in confusing output (e.g. an apparently in-range number claimed to be out of range). Use the abstraction that bfd provides for this. Take the opportunity and also insert a missing "of".
2021-04-22gdb: use function_view for iterate_over_bp_locations' callbackSimon Marchi4-6/+13
Use a function_view instead of function pointer + data. Actually, nothing uses the data anyway, but that makes iterate_over_bp_locations more like iterate_over_breakpoints. gdb/ChangeLog: * breakpoint.c (iterate_over_bp_locations): Change callback to function view, remove data parameter. * breakpoint.h (iterate_over_bp_locations): Likewise. * record-full.c (record_full_sync_record_breakpoints): Remove data parameter. Change-Id: I66cdc94a505f67bc640bcc66865fb535ee939a57
2021-04-22Do not check for sys/time.h or sys/times.hTom Tromey104-455/+206
This updates the sim so that it unconditionally uses sys/time.h. This is in agreement with existing code, and a recent change to BFD. I also think that sys/times.h is never needed by the sim, so this patch removes the check and the one spot that was conditionally including it. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h or sys/times.h. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-utils.c: Update includes. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * simops.c: Update includes. * configure, config.in: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rvdummy.c: Update includes. * dv-rv.c: Update includes. * configure, config.in: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * mon.c: Update includes. * emul_unix.c: Update includes. (do_unix_gettimeofday): Update condition. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * interp.c: Update includes. * configure, config.in: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild.
2021-04-22Remove LIBS from two sim MakefilesTom Tromey4-4/+8
A couple of sim Makefiles define LIBS, but don't use it. This removes these. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (LIBS): Remove sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (LIBS): Remove.
2021-04-22Remove INCLUDE variable from some sim MakefilesTom Tromey8-9/+16
Some Makefiles in sim define INCLUDE but don't use it. This removes these instances. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE): Remove. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE): Remove. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE): Remove.
2021-04-22Remove and modernize dependencies in simTom Tromey33-193/+139
Some spots in the sim build used manual dependencies, and some spots did a compilation by hand but did not use the automatic dependency tracking code. This patch fixes these spots. I didn't touch ppc, because it doesn't use the common Makefile code. I also didn't touch objects that are for the build machine, because automatic dependencies don't work for those. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and POSTCOMPILE. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove. (mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o) (sim-be.o): Use COMPILE and POSTCOMPILE. (SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o) (devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o) (modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o) (modelv32.o): Remove. (SIM_EXTRA_DEPS): Add engv10.h. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o) (interrupts.o, memory.o, cache.o, options.o, reset.o) (registers.o, profile.o, profile-fr400.o, profile-fr450.o) (profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o) (decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o): Remove. (arch.o): Use COMPILE and POSTCOMPILE. (devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o) (cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o) (devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o) (m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o) (m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove. (SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o): Remove. (SIM_EXTRA_DEPS): New variable. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. (idecode.o op_utils.o semantics.o): Remove. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o) (sem-switch.o, model.o): Remove. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (reg.o, rl78.o): Remove. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (interp.o): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, simops.o, semantics.o): Remove.
2021-04-22Require GNU makeTom Tromey65-2102/+205
GDB has required GNU make for quite some time, and this patch applies this approach to the sim as well. Requiring GNU make means that automatic dependency tracking can be simple and reliable, and it also makes other refactorings simpler. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in: Require GNU make. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2021-04-22Add stamp files for generated files in sim/ppcTom Tromey2-2/+13
This changes the sim/ppc Makefile to use the stamp file idiom for a couple of generated files, avoiding extra rebuilds. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (stamp-vals, stamp-map): New targets. (targ-vals.h, targ-map.c): Update. (clean): Remove files.
2021-04-22Introduce stamp file for hw-config.hTom Tromey2-2/+11
This adds a stamp file for hw-config.h, to avoid unnecessary rebuilds. It also arranges to remove hw-config.h in "mostlyclean", because the file is created by "make". sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in (stamp-hw): New target. (hw-config.h): Depend on stamp-hw. (mostlyclean): Remove stamp-hw and hw-config.h.
2021-04-22Make mostlyclean an alias for cleanTom Tromey2-2/+7
I found out by accident that "mostlyclean" in a sim subdir removes all the configure artifacts. The usual rule is: * If the maintainer built it, maintainer-clean should remove it; * If configure built it, distclean should remove it; * If make built it, "clean" should remove it; * If there is a handy subset of "clean" that is "easy" to rebuild, "mostlyclean" should remove it; otherwise mostlyclean should be an alias for clean This patch makes mostlyclean an alias for clean. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in (mostlyclean): Now an alias for clean, not distclean.
2021-04-22Fix sim build failureTom Tromey2-4/+6
On x86-64 Fedora 32, the sim was failing to build. sim_events_schedule was passing a 'dummy' argument to sim_events_schedule_vtracef, which caused an error because the format parameter was NULL. However, removing this dummy argument caused an error because too few arguments were being passed -- catch 22. This patch fixes the build problem by using sim_events_schedule_tracef instead. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-events.c (sim_events_schedule): Use sim_events_schedule_tracef.
2021-04-22Fix ptype/o bug with "<no data fields>"Tom Tromey5-5/+37
I noticed that when using ptype/o, the "<no data fields>" text that may be emitted is indented incorrectly. This patch fixes the bug and adds a new test case. I also removed a stray backslash from ptype-offsets.exp that I noticed while writing the test. This seemed too trivial to warrant a separate patch. gdb/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * c-typeprint.c (c_type_print_base_struct_union): Use print_spaces_filtered_with_print_options. gdb/testsuite/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * gdb.base/ptype-offsets.cc (struct empty_member): New. (main): Use empty_member. * gdb.base/ptype-offsets.exp: Add new test.
2021-04-23Automatic date update in version.inGDB Administrator1-1/+1
2021-04-22gdb/testsuite: add Python support check in gdb.python/flexible-array-member.expSimon Marchi2-0/+8
We don't want to execute this test if Python support is not compiled in GDB, add the necessary check. gdb/testsuite/ChangeLog: * gdb.python/flexible-array-member.exp: Add check for Python support. Change-Id: I853b937d2a193a0bb216566bef1a35354264b1c5
2021-04-22gdb: fix getting range of flexible array member in PythonSimon Marchi8-4/+210
As reported in bug 27757, we get an internal error when doing: $ cat test.c struct foo { int len; int items[]; }; struct foo *p; int main() { return 0; } $ gcc test.c -g -O0 -o test $ ./gdb -q -nx --data-directory=data-directory ./test -ex 'python gdb.parse_and_eval("p").type.target()["items"].type.range()' Reading symbols from ./test... /home/simark/src/binutils-gdb/gdb/gdbtypes.h:435: internal-error: LONGEST dynamic_prop::const_val() const: Assertion `m_kind == PROP_CONST' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) This is because the Python code (typy_range) blindly reads the high bound of the type of `items` as a constant value. Since it is a flexible array member, it has no high bound, the property is undefined. Since commit 8c2e4e0689 ("gdb: add accessors to struct dynamic_prop"), the getters check that you are not getting a property value of the wrong kind, so this causes a failed assertion. Fix it by checking if the property is indeed a constant value before accessing it as such. Otherwise, use 0. This restores the previous GDB behavior: because the structure was zero-initialized, this is what was returned before. But now this behavior is explicit and not accidental. Add a test, gdb.python/flexible-array-member.exp, that is derived from gdb.base/flexible-array-member.exp. It tests the same things, but through the Python API. It also specifically tests getting the range from the various kinds of flexible array member types (AFAIK it wasn't possible to do the equivalent through the CLI). gdb/ChangeLog: PR gdb/27757 * python/py-type.c (typy_range): Check that bounds are constant before accessing them as such. * guile/scm-type.c (gdbscm_type_range): Likewise. gdb/testsuite/ChangeLog: PR gdb/27757 * gdb.python/flexible-array-member.c: New test. * gdb.python/flexible-array-member.exp: New test. * gdb.guile/scm-type.exp (test_range): Add test for flexible array member. * gdb.guile/scm-type.c (struct flex_member): New. (main): Use it. Change-Id: Ibef92ee5fd871ecb7c791db2a788f203dff2b841
2021-04-22sim: sprinkle some ATTRIBUTE_PRINTFSimon Marchi4-8/+16
Add some ATTRIBUTE_PRINTF attributes to functions that take a format string, to fix a few -Wformat-nonliteral warnings. Use the ATTRIBUTE_PRINTF macro like we use in GDB, instead of spelling out __attribute__((format...)). Use ATTRIBUTE_NULL_PRINTF at one place, because callers expect to be able to pass NULL. sim/common/ChangeLog: * callback.c (os_printf_filtered, os_vprintf_filtered, os_evprintf_filtered, os_error): Use ATTRIBUTE_PRINTF. * sim-engine.h (sim_engine_abort, sim_engine_vabort): Likewise. * sim-events.h (sim_events_schedule_tracef, sim_events_schedule_vtracef): Use ATTRIBUTE_NULL_PRINTF. Change-Id: Icd206f7b2c325e8b144f72eb129fb2a6b5af2fa3
2021-04-22gdb/continuations: turn continuation functions into inferior methodsTankut Baris Aktemur9-108/+51
Turn continuations-related functions into methods of the inferior class. This is a refactoring. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * Makefile.in (COMMON_SFILES): Remove continuations.c. * inferior.c (inferior::add_continuation): New method, adapted from 'add_inferior_continuation'. (inferior::do_all_continuations): New method, adapted from 'do_all_inferior_continuations'. (inferior::~inferior): Clear the list of continuations directly. * inferior.h (class inferior) <continuations>: Rename into... <m_continuations>: ...this and make private. * continuations.c: Remove. * continuations.h: Remove. * event-top.c: Don't include "continuations.h". Update the users below. * inf-loop.c (inferior_event_handler) * infcmd.c (attach_command) (notice_new_inferior): Update.
2021-04-22gdb/continuations: use lambdas instead of function pointersTankut Baris Aktemur5-143/+48
Use lambdas and std::list to track inferior continuations. This is a refactoring. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * inferior.h (class inferior) <continuations>: Change the type to be an std::list of std::function's. Update the references and uses below. * continuations.c (struct continuation): Delete. (make_continuation): Delete. (do_my_continuations_1): Delete. (do_my_continuations): Delete. (discard_my_continuations_1): Delete. (discard_my_continuations): Delete. (add_inferior_continuation): Update. (do_all_inferior_continuations): Update. (discard_all_inferior_continuations): Update. * continuations.h (add_inferior_continuation): Update to take an std::function as the parameter. * infcmd.c (struct attach_command_continuation_args): Delete. (attach_command_continuation): Delete. (attach_command_continuation_free_args): Delete. (attach_command): Update. (notice_new_inferior): Update.
2021-04-22gdb/continuations: do minor cleanupTankut Baris Aktemur4-5/+9
Inferior continuations are no longer used by the until and finish command. It is used only by the attach command and the remote target upon detecting new inferiors. Update the comment accordingly. Also update another comment about non-existent thread continuations and remove an unused #include. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * continuations.h: Update the general comment. * inferior.h (class inferior) <continuations>: Update the comment. * interps.c: Do not include "continuations.h".
2021-04-22gdb/continuations: remove the 'err' from 'do_all_inferior_continuations'Tankut Baris Aktemur5-20/+21
The 'err' parameter of 'do_all_inferior_continuations' is effectively unused. There is only one place where the function is called, and there the argument is a literal 0. So, remove the parameter. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * continuations.h (do_all_inferior_continuations): Remove the 'err' parameter. Update the references below. * continuations.c (do_my_continuations_1) (do_my_continuations) (do_all_inferior_continuations): Update. * inf-loop.c (inferior_event_handler): Update. * infcmd.c (attach_command_continuation): Update.
2021-04-22gdb/infcmd: update the comment for 'attach_post_wait'Tankut Baris Aktemur2-3/+7
gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * infcmd.c (attach_post_wait): Update the function comment.
2021-04-22gdb/infcmd: remove the unused parameter 'args' in 'attach_post_wait'Tankut Baris Aktemur2-8/+14
The 'arg' parameter of 'attach_post_wait' is unused. Remove it. gdb/ChangeLog: 2021-04-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * infcmd.c (attach_post_wait): Remove the unused parameter 'args'. Update the references below. (struct attach_command_continuation_args) (attach_command_continuation) (attach_command_continuation_free_args) (attach_command) (notice_new_inferior): Update to remove the reference to 'args'.
2021-04-22[gdb] Fix assert in remote_async_get_pending_events_handlerTom de Vries4-1/+22
Occassionally I run into the following assert: ... (gdb) PASS: gdb.multi/multi-target-continue.exp: inferior 5 Remote debugging from host ::1, port 49990^M Process multi-target-continue created; pid = 31241^M src/gdb/remote-notif.c:113: internal-error: \ void remote_async_get_pending_events_handler(gdb_client_data): \ Assertion `target_is_non_stop_p ()' failed.^M ... The assert checks target_is_non_stop_p, which is related to the current target. Fix this by changing the assert such that it checks non-stopness related to the event it's handling. Tested on x86_64-linux. gdb/ChangeLog: 2021-04-22 Simon Marchi <simon.marchi@polymtl.ca> Tom de Vries <tdevries@suse.de> PR remote/27710 * remote.c (remote_target_is_non_stop_p): New function. * remote.h (remote_target_is_non_stop_p): Declare. * remote-notif.c (remote_async_get_pending_events_handler): Fix assert to check non-stopness using notif_state->remote rather current target.
2021-04-22fix string table generation for XCOFF64 .debug sectionCl?ment Chigot5-18/+40
bfd * hash.c (struct bfd_strtab_hash): Remove xcoff field. Add length_field_size field. (_bfd_stringtab_init): Change prototype. Adapt to new length_field_size. (_bfd_xcoff_stringtab_init): Likewise. (_bfd_stringtab_add): Likewise. (_bfd_stringtab_emit): Likewise. * libbfd-in.h (_bfd_xcoff_stringtab_init): Change prototype. * libbfd.h: Regenerate. * xcofflink.c (_bfd_xcoff_bfd_link_hash_table_create): Call _bfd_xcoff_stringtab_init with isxcoff64 value.
2021-04-22Improve code coverage of Rust testingTom Tromey6-8/+41
I enabled code coverage and ran the gdb test suite, and noticed that the new Rust parser was missing testing on a few lines that were easy to cover. This patch mostly adds tests for certain syntax errors; but this process also uncovered a couple of real bugs: I must have cut-and-pasted the 'sizeof' parsing code from some other code, because it is checking for KW_MUT (the old bison parser did not do this), and the array length check is actually impossible because a negative number like '-1' is parsed as two tokens. gdb/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rust-parse.c (rust_parser::parse_sizeof): Remove KW_MUT code. (struct typed_val_int) <val>: Now ULONGEST. (rust_parser::parse_array_type): Remove negative check. (rust_lex_int_test): Change 'value' to ULONGEST. gdb/testsuite/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * gdb.rust/modules.exp: Add checks for syntax errors. * gdb.rust/expr.exp: Add checks for syntax errors. * gdb.rust/simple.exp: Add checks for syntax errors.
2021-04-22Harmonize and improve auxiliary entries support for XCOFFCl?ment Chigot9-306/+330
bfd/ChangeLog: * coff-rs6000.c (_bfd_xcoff_swap_aux_in): Add errors for unsupported storage class or auxialiry entries. Improve and adapt to new aux structures. Add C_DWARF support. (_bfd_xcoff_swap_aux_out): Likewise. * coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Likewise. (_bfd_xcoff64_swap_aux_out): Likewise. binutils/ChangeLog: * od-xcoff.c (dump_xcoff32_symbols): Adapt to new aux structures. include/ChangeLog: * coff/internal.h (union internal_auxent): Add x_sect structure. * coff/rs6000.h (union external_auxent): Rework to match official documentation. * coff/rs6k64.h (union external_auxent): Likewise. (_AUX_SECT): New define.
2021-04-22x86-64/PE: adjust PR ld/26659 testcase for CygwinJan Beulich2-25/+23
While the testcase put in place by 74edb473c9ec ("PE/Windows x86_64: Fix weak undef symbols after image base change") is fine for MingW, it fails for Cygwin. This is because the default image base is different there (for whatever reason).
2021-04-22gdb: allow default_addressable_memory_unit_size to handle more casesAndrew Burgess2-3/+10
Currently default_addressable_memory_unit_size always returns 1, indicating 1 byte is 1 octet. If a target has something other than this (common) setup then the target should override the default_addressable_memory_unit_size. However, the bfd library already knows about each targets octets per byte, so it seems redundant making targets override this method to tell GDB something it already knows (through bfd). In this commit I propose to make default_addressable_memory_unit_size return a value based on bfd's bits per byte. I checked, and for every target that GDB currently supports the bits per byte in bfd is 8, so the current behaviour will not change. In fact, the only targets in bfd that have bits per byte set to something other than 8 can be found in cpu-tic4x.c and cpu-tic54x.c, I don't believe these are supported by GDB right now. I don't propose to remove the ability to override default_addressable_memory_unit_size, this allows targets additional flexibility for how to handle weird combinations of byte sizes. This change was motivated by an out of tree target I was working on, but it seemed like it was a good change that others might benefit from. There should be no user visible changes after this commit. gdb/ChangeLog: * arch-utils.c (default_addressable_memory_unit_size): Return a value based on bfd's bits per byte.
2021-04-21sim: regen against sim/m4/Mike Frysinger62-305/+429
My scripts weren't updated to use new -I../m4 as the first arg.
2021-04-22Automatic date update in version.inGDB Administrator1-1/+1
2021-04-21sim: use -Werror when probing for supported warning flagsSimon Marchi64-32/+161
When building with clang, we get: error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option] This is because clang only warns by default when encountering an unknown warning option, and the probe for supported warning flags is done without -Werror. All flags are therefore accepted by configure, but then it breaks when actually compiling a source file with -Werror. This is equivalent to this commit in gdb: 3e019bdc20eb81b91ab5bc774386201b874c0bac gdb: Use -Werror when checking for (un)supported warning flags We then see some other compilation errors when building with clang and -Werror, they can be dealt with later.
2021-04-21Shrink size of dwarf2_per_cu_dataTom Tromey4-24/+34
I noticed some holes in struct dwarf2_per_cu_data. This patch rearranges the type slightly, and shrinks the size of some fields. This reduces it from 136 bytes to 112 bytes (on x86-64). I also reduced the size of the DWARF "version" fields in a couple of spots. It seemed needless to use a short to hold a value that ranges from 2 to 5, and this also helped the goal of shrinking dwarf2_per_cu_data. 2021-04-21 Tom Tromey <tom@tromey.com> * dwarf2/read.h (struct dwarf2_per_cu_data) <dwarf_version>: Now unsigned char. (struct dwarf2_per_cu_data): Rearrange. * dwarf2/comp-unit.h (struct comp_unit_head) <version>: Now unsigned char. (struct comp_unit_head): Rearrange. * dwarf2/comp-unit.c (read_comp_unit_head): Update.
2021-04-21Fix test case gdb.base/valgrind-bt.exp.Carl Love3-2/+16
gdb/testsuite/ChangeLog: * gdb.base/valgrind-bt.exp: Add gdb_test "break main". Update expected string for gdb_test "bt". * lib/valgrind.exp: Add set remotetimeout 3. Increase vgdb wait from 1 to 2. Add max-invoke-ms option to vgdb command line.
2021-04-21[gdb/build] Hardcode --with-included-regexTom de Vries5-101/+8
Currently gdb has a configure option: ... $ ./src/gdb/configure --help ... --without-included-regex don't use included regex; this is the default on systems with version 2 of the GNU C library (use with caution on other system) ... The configure option controls config.h macro USE_INCLUDED_REGEX, which is used in gdb/gdb_regex.h to choose between: - using regex from libiberty (which is included in the binutils-gdb.git repo, hence the 'included' in USE_INCLUDED_REGEX), or - using regex.h. In the former case, the symbol regcomp is remapped to a symbol xregcomp, which is then provided by libiberty. In the latter case, the symbol regcomp is resolved at runtime, usually binding to libc. However, there is no mechanism in place to enforce this. PR27681 is an example of where that causes problems. On openSUSE Tumbleweed, the ncurses package got the --with-pcre2 configure switch enabled, and solved the resulting dependencies using: ... $ cat /usr/lib64/libncursesw.so /* GNU ld script */ -INPUT(/lib64/libncursesw.so.6 AS_NEEDED(-ltinfo -ldl)) +INPUT(/lib64/libncursesw.so.6 AS_NEEDED(-ltinfo -ldl -lpcre2-posix -lpcre2-8)) ... This lead to regcomp being bound to libpcre2-posix instead of libc. This causes problems in several ways: - by compiling using regex.h, we've already chosen a specific regex_t implementation, and the one from pcre2-posix is not the same. - in gdb_regex.c we use GNU regex function re_search, which pcre2-posix doesn't provide, so while regcomp binds to pcre2-posix, re_search binds to libc. A note on the latter: it's actually a bug to compile a regex using regcomp and then pass it to re_search. The GNU regex interface requires one to use re_compile_pattern or re_compile_fastmap. But as long we're using one of the GNU regex incarnations in gnulib, glibc or libiberty, we get away with this. The PR could be fixed by adding -lc in a specific position in the link line, to force regcomp to be bound to glibc. But this solution was considered in the discussion in the PR as being brittle, and possibly causing problems elsewhere. Another solution offered was to restrict regex usage to posix, and no longer use the GNU regex API. This however could mean having to reproduce some of that functionality locally, which would mean maintaining the same functionality in more than one place. The solution chosen here, is to hardcode --with-included-regex, that is, using libiberty. The option of using glibc for regex was introduced because glibc became the authorative source for GNU regex, so it offered the possibility to link against a more up-to-date regex version. In that aspect, this patch is a step back. But we have the option of using a more up-to-date regex version as a follow-up step: by using the regex from gnulib. Tested on x86_64-linux. gdb/ChangeLog: 2021-04-21 Tom de Vries <tdevries@suse.de> PR build/27681 * configure.ac: Remove --without-included-regex/--with-included-regex. * config.in: Regenerate. * configure: Regenerate. * gdb_regex.h: Assume USE_INCLUDED_REGEX is defined.
2021-04-21Extend the description of PE header flags.Eli Zaretskii4-0/+47
PR 27760 include * coff/pe.h (IMAGE_DLLCHARACTERISTICS_APPCONTAINER): Define. (IMAGE_DLLCHARACTERISTICS_GUARD_CF): Define. bfd * peXXigen.c (_bfd_XX_print_private_bfd_data_common): Add display of IMAGE_FILE_REMOVABLE_RUN_FROM_SWAP, IMAGE_FILE_NET_RUN_FROM_SWAP and IMAGE_FILE_UP_SYSTEM_ONLY flags. Decode the contents of the DllCharacteristics field.
2021-04-21gdb/breakpoint: add a 'force_condition' parameter to 'create_breakpoint'Tankut Baris Aktemur9-9/+81
The 'create_breakpoint' function takes a 'parse_extra' argument that determines whether the condition, thread, and force-condition specifiers should be parsed from the extra string or be used from the function arguments. However, for the case when 'parse_extra' is false, there is no way to pass the force-condition specifier. This patch adds it as a new argument. Also, in the case when parse_extra is false, the current behavior is as if the condition is being forced. This is a bug. The default behavior should reject the breakpoint. See below for a demo of this incorrect behavior. (The MI command '-break-insert' uses the 'create_breakpoint' function with parse_extra=0.) $ gdb -q --interpreter=mi3 /tmp/simple =thread-group-added,id="i1" =cmd-param-changed,param="history save",value="on" =cmd-param-changed,param="auto-load safe-path",value="/" ~"Reading symbols from /tmp/simple...\n" (gdb) -break-insert -c junk -f main &"warning: failed to validate condition at location 1, disabling:\n " &"No symbol \"junk\" in current context.\n" ^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="1.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]} (gdb) break main if junk &"break main if junk\n" &"No symbol \"junk\" in current context.\n" ^error,msg="No symbol \"junk\" in current context." (gdb) break main -force-condition if junk &"break main -force-condition if junk\n" ~"Note: breakpoint 1 also set at pc 0x114e.\n" &"warning: failed to validate condition at location 1, disabling:\n " &"No symbol \"junk\" in current context.\n" ~"Breakpoint 2 at 0x114e: file /tmp/simple.c, line 2.\n" =breakpoint-created,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="2.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]} ^done (gdb) After applying this patch, we get the behavior below: (gdb) -break-insert -c junk -f main ^error,msg="No symbol \"junk\" in current context." This restores the behavior that is present in the existing releases. gdb/ChangeLog: 2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * breakpoint.h (create_breakpoint): Add a new parameter, 'force_condition'. * breakpoint.c (create_breakpoint): Use the 'force_condition' argument when 'parse_extra' is false to check if the condition is invalid at all of the breakpoint locations. Update the users below. (break_command_1) (dprintf_command) (trace_command) (ftrace_command) (strace_command) (create_tracepoint_from_upload): Update. * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update. * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update. * python/py-breakpoint.c (bppy_init): Update. * python/py-finishbreakpoint.c (bpfinishpy_init): Update. gdb/testsuite/ChangeLog: 2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * gdb.mi/mi-break.exp: Extend with checks for invalid breakpoint conditions.
2021-04-21testsuite, gdb.mi: fix duplicate test names in mi-break.expSimon Marchi2-9/+14
gdb/testsuite/ChangeLog: 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca> Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * gdb.mi/mi-break.exp: Fix the duplicate test names.
2021-04-21gdb/breakpoint: display "N" on MI for disabled-by-condition locationsTankut Baris Aktemur4-5/+28
For breakpoint locations that are disabled because of an invalid condition, CLI displays "N*" in the 'enabled' field, where '*' refers to the footnote below the table: (*): Breakpoint condition is invalid at this location. This is not necessary for MI, where we shall simply print "N" without the footnote. Update the document to mention the "N" value for the MI. Also remove the line about the 'enable' field, because there is no such field for locations. gdb/ChangeLog: 2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * breakpoint.c (print_one_breakpoint_location): Display "N" for disabled-by-condition locations on MI-like output. (breakpoint_1): Do not display the disabled-by-condition footnote if the output is MI-like. gdb/doc/ChangeLog: 2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * gdb.texinfo (GDB/MI Breakpoint Information): Update the description for the 'enabled' field of breakpoint locations.
2021-04-21Add ability to select numeric base when displaying symbol values in readelf.Nick Lott4-9/+110
PR 27672 * readelf.c (sym_base): New variable. (enum print_mode): Add more modes. (print_vma): Add suport for new modes. (options): Add sym-base. (usage): Add sym-base. (parse_args): Add support for --sym-base. (print_dynamic_symbol_size): New function. (print_dynamic_symbol): Use new function. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2021-04-21update-netbsd.sh: fix script name, update year range in copyright.Frederic Cambus2-2/+7
Fix the script name and year range in update-netbsd.sh. gdb/ChangeLog 2021-04-21 Frederic Cambus <fred@statdns.com> * syscalls/update-netbsd.sh: Fix script name display in usage, and update year range in generated copyright notices.
2021-04-21Fix an assertion failure in the BFD library when parsing a corrupt SREC ↵Nick Clifton2-4/+14
format file. PR 27759 * srec.c (srec_read_section): Replace assertions with error returns.
2021-04-21Adjust readelf's output so that section symbols without a name as shown with ↵Nick Clifton94-645/+767
their section name. binutils* readelf.c (print_dynamic_symbol): Print the section name for section symbols without a name of their own. * testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d: Adjust expected output to allow for named section symbols. * testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. ld * testsuite/ld-aarch64/variant_pcs-now.d: Adjust expected output to allow for named section symbols. * testsuite/ld-aarch64/variant_pcs-r.d: Likewise. * testsuite/ld-aarch64/variant_pcs-shared.d: Likewise. * testsuite/ld-alpha/tlsbin.rd: Likewise. * testsuite/ld-alpha/tlsbinr.rd: Likewise. * testsuite/ld-alpha/tlspic.rd: Likewise. * testsuite/ld-arm/rodata-merge-map.sym: Likewise. * testsuite/ld-arm/script-type.sym: Likewise. * testsuite/ld-cris/libdso-2.d: Likewise. * testsuite/ld-cris/pr16044.d: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-ia64/tlsbin.rd: Likewise. * testsuite/ld-ia64/tlspic.rd: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise. * testsuite/ld-mmix/bspec1.d: Likewise. * testsuite/ld-mmix/bspec2.d: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-mmix/undef-3.d: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sparc/gotop32.rd: Likewise. * testsuite/ld-sparc/gotop64.rd: Likewise. * testsuite/ld-sparc/tlssunbin32.rd: Likewise. * testsuite/ld-sparc/tlssunbin64.rd: Likewise. * testsuite/ld-sparc/tlssunnopic32.rd: Likewise. * testsuite/ld-sparc/tlssunnopic64.rd: Likewise. * testsuite/ld-sparc/tlssunpic32.rd: Likewise. * testsuite/ld-sparc/tlssunpic64.rd: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. gas * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow for named section symbols. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/bfin/loop_temps.d: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/elf/section2.e-arm: Likewise. * testsuite/gas/elf/section2.e-csky: Likewise. * testsuite/gas/elf/section2.e-m32r: Likewise. * testsuite/gas/elf/section2.e-mips: Likewise. * testsuite/gas/elf/section2.e-msp430: Likewise. * testsuite/gas/elf/section2.e-riscv: Likewise. * testsuite/gas/elf/section2.e-rl78: Likewise. * testsuite/gas/elf/section2.e-rx: Likewise. * testsuite/gas/elf/section2.e-score: Likewise. * testsuite/gas/elf/section2.e-tic6x: Likewise. * testsuite/gas/elf/section2.e-unused: Likewise. * testsuite/gas/elf/section2.e-v850: Likewise. * testsuite/gas/elf/section2.e-xtensa: Likewise. * testsuite/gas/ia64/alias-ilp32.d: Likewise. * testsuite/gas/ia64/alias.d: Likewise. * testsuite/gas/ia64/global.d: Likewise. * testsuite/gas/microblaze/relax_size.elf: Likewise. * testsuite/gas/microblaze/relax_size2.elf: Likewise. * testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise. * testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/byte-1.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/mmix/loc-1.d: Likewise. * testsuite/gas/mmix/loc-2.d: Likewise. * testsuite/gas/mmix/loc-3.d: Likewise. * testsuite/gas/mmix/loc-4.d: Likewise. * testsuite/gas/mmix/loc-5.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
2021-04-21Automatic date update in version.inGDB Administrator1-1/+1
2021-04-20Rework the R_NEG support on both gas and ld for the PowerPC AIX targets, in ↵Cl?ment Chigot16-33/+255
order to manage C++ exceptions built with GCC. bfd PR binutils/21700 * reloc.c (BFD_RELOC_PPC_NEG): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. (xcoff_reloc_type_neg): Correctly substract addend. * coff64-rs6000.c (xcoff64_howto_table): Add R_NEG_32 howto. (xcoff64_rtype2howto): Add handler for R_NEG_32. (xcoff64_reloc_type_lookup): Add BFD_RELOC_PPC_NEG handler. * xcofflink.c (xcoff_need_ldrel_p): Check output section for R_POS-like relocations. New argument added. (xcoff_mark): Adapt to new xcoff_need_ldrel_p argument. (xcoff_link_input_bfd): Likewise. gas * config/tc-ppc.c (ppc_get_csect_to_adjust): New function. (ppc_fix_adjustable): Manage fx_subsy part. (tc_gen_reloc): Create second relocation when both fx_addsy and fx_subsy are provided. * config/tc-ppc.h (RELOC_EXPANSION_POSSIBLE): New define. (MAX_RELOC_EXPANSION): Likewise. (TC_FORCE_RELOCATION_SUB_SAME): Likewise (UNDEFINED_DIFFERENCE_OK): Likewise * testsuite/gas/all/gas.exp: Skip difference between two undefined symbols test. ld * testsuite/ld-powerpc/aix52.exp: Add new test. * testsuite/ld-powerpc/aix-neg-reloc-32.d: New test. * testsuite/ld-powerpc/aix-neg-reloc-64.d: New test. * testsuite/ld-powerpc/aix-neg-reloc.ex: New test. * testsuite/ld-powerpc/aix-neg-reloc.s: New test.
2021-04-20sim: rl78/rx: drop unnecessary getopt.h probingMike Frysinger10-28/+16
Since getopt.h is provided by libiberty, there's no need to probe for a system version of it. Plus we already assume it exists in other parts of the sim.
2021-04-20MAINTAINERS: Remove Martin Schwidefsky as s390 maintainerAndreas Krebbel2-2/+8
https://lwn.net/ml/linux-kernel/20190521162350.GA17107@osiris/ ChangeLog: 2021-04-20 Andreas Krebbel <krebbel@linux.ibm.com> * MAINTAINERS: Remove Martin Schwidefsky as s390 maintainer and add him to Past Maintainers. Update my email address.
generated by cgit v1.1 at 2024-11-26 02:47:31 +0000