| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
example, and add a small explanation about it.
(Print Settings): Change the documentation of the "set print
frame-arguments" to reflect the fact that the default is now "scalars".
|
|
print frame-arguments".
|
|
mi_run_to_main. Skip thread exit test on remote targets.
* gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
mi_run_to_main.
* gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
mi_run_to_main.
* lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
when expecting ^connected. Detect when the target doesn't support
non-stop mode.
(mi_run_cmd): Detect if non-stop mode was requested by isn't
supported. Return -1 on error, 0 on success.
(mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
(mi_runto): Return mi_runto_helper's result explicitly.
|
|
PR ld/6744
* ld.texinfo (--export-dynamic): Mention --export-all-symbols.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_parse): Issue
warning if --export-dynamic was passed on command-line.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_parse): Likewise.
ld/testsuite/ChangeLog
PR ld/6744
* ld-pe/export_dynamic_warning.d: New test control file.
* ld-pe/export_dynamic_warning.s: New test source file.
* ld-pe/pe.exp: Also run export_dynamic_warning dump test.
|
|
bfd/
* elf32-arm.c (elf32_arm_stub_long_branch_v4t_thumb_thumb,
elf32_arm_stub_long_branch_v4t_thumb_thumb_pic): Two new long
branch stubs.
(elf32_arm_stub_type): New enum values for the two new stubs.
(arm_type_of_stub): Make use of the two new stubs.
(arm_size_one_stub): Handle the two new stubs.
testsuite/
* ld-arm/farcall-thumb-thumb-pic-veneer.d: Update expected
results.
* ld-arm/farcall-thumb-thumb.d: Likewise.
|
|
file before downloading.
(strip_executable_with_saving_a_symbol): Likewise.
(keep_debug_symbols_and_test_copy): Likewise.
|
|
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
|
|
* doc/c-arm.texi: Added codes for processors ARM Cortex-M0 and
Cortex-M1.
|
|
* lib/ld-lib.exp (check_gc_sections_available): Do not run garbage
collection tests for cygwin targets.
|
|
each version of Unordered_map.
* layout.cc (Layout::Layout): Remove options parameter. Add
number_of_input_files parameter. Don't initialize options_.
Initialize number_of_input_files_ and resized_signatures_. Move
sections_are_attached_.
(Layout::layout_group): Reserve space for group_signatures_.
(Layout::find_or_add_kept_section): Change name parameter to be a
reference. Resize signatures_ map when it gets large enough.
(Layout::layout_eh_frame): Use parameters->options() instead of
this->options_.
(Layout::make_output_section): Likewise.
(Layout::attach_allocated_section_to_segment): Likewise.
(Layout::finalize, Layout::create_executable_stack): Likewise.
(Layout::set_segment_offsets, Layout::create_interp): Likewise.
(Layout::finish_dynamic_section, Layout::write_binary): Likewise.
* layout.h (class Layout): Update declarations. Remove options_
field. Add number_of_input_files_ and resized_signatures_
fields. Move sections_are_attached_ field.
* main.cc (main): Pass number of input files to Layout
constructor. Don't pass options.
|
|
* ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
E500MC entries.
|
|
* elf32-vax.c (elf_vax_check_relocs): Do not put relocations against
hidden symbols into the GOT or PLT.GOT.
(elf_vax_relocate_section): Do not emit a PCREL reloc
into a shared object if it is against a hidden symbol.
|
|
* config/tc-vax.c (synthetic_votstrs): add "jbbcci" and "jbbssi"
(md_assemble): emit symbol name when used as immediate in PIC mode.
(md_assemble): fix LP64 bug (use sizeof (valueT) instead 4).
|
|
|
|
|
|
Implement the multiprocess extensions, and add linux multiprocess
support.
* server.h (ULONGEST): Declare.
(struct ptid, ptid_t): New.
(minus_one_ptid, null_ptid): Declare.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
(struct inferior_list_entry): Change `id' type from unsigned from
to ptid_t.
(struct sym_cache, struct breakpoint, struct
process_info_private): Forward declare.
(struct process_info): Declare.
(current_process): Declare.
(all_processes): Declare.
(initialize_inferiors): Declare.
(add_thread): Adjust to use ptid_t.
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
(add_process, remove_process, find_thread_pid): Declare.
(find_inferior_id): Adjust to use ptid_t.
(cont_thread, general_thread, step_thread): Change type to ptid_t.
(multi_process): Declare.
(push_event): Adjust to use ptid_t.
(read_ptid, write_ptid): Declare.
(prepare_resume_reply): Adjust to use ptid_t.
(clear_symbol_cache): Declare.
* inferiors.c (all_processes): New.
(null_ptid, minus_one_ptid): New.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): New.
(add_thread): Change unsigned long to ptid. Remove gdb_id
parameter. Adjust.
(thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
(gdb_id_to_thread): Rename to ...
(find_thread_pid): ... this. Change unsigned long to ptid.
(gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
(loaded_dll, pull_pid_from_list): Adjust.
(add_process, remove_process, find_process_pid)
(get_thread_process, current_process, initialize_inferiors): New.
* target.h (struct thread_resume) <thread>: Change type to ptid_t.
(struct target_waitstatus) <related_pid>: Ditto.
(struct target_ops) <kill, detach>: Add `pid' argument. Change
return type to int.
(struct target_ops) <join>: Add `pid' argument.
(struct target_ops) <thread_alive>: Change pid's type to ptid_t.
(struct target_ops) <wait>: Add `ptid' field. Change return type
to ptid.
(kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
(mywait): Add `ptid' argument. Change return type to ptid_t.
(target_pid_to_str): Declare.
* target.c (set_desired_inferior): Adjust to use ptids.
(mywait): Add new `ptid' argument. Adjust.
(target_pid_to_str): New.
* mem-break.h (free_all_breakpoints): Declare.
* mem-break.c (breakpoints): Delelete.
(set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
(check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
to use per-process breakpoint list.
(free_all_breakpoints): New.
* remote-utils.c (struct sym_cache) <name>: Drop `const'.
(symbol_cache, all_symbols_looked_up): Delete.
(hexchars): New.
(ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
read_ptid): New.
(prepare_resume_reply): Change ptid argument's type from unsigned
long to ptid_t. Adjust. Implement W;process and X;process.
(free_sym_cache, clear_symbol_cache): New.
(look_up_one_symbol): Adjust to per-process symbol cache. *
* server.c (cont_thread, general_thread, step_thread): Change type
to ptid_t.
(attached): Delete.
(multi_process): New.
(last_ptid): Change type to ptid_t.
(struct vstop_notif) <ptid>: Change type to ptid_t.
(queue_stop_reply, push_event): Change `ptid' argument's type to
ptid_t.
(discard_queued_stop_replies): Add `pid' argument.
(start_inferior): Adjust to use ptids. Adjust to mywait interface
changes. Don't reference the `attached' global.
(attach_inferior): Adjust to mywait interface changes.
(handle_query): Adjust to use ptids. Parse GDB's qSupported
features. Handle and report "multiprocess+". Handle
"qAttached:PID".
(handle_v_cont): Adjust to use ptids. Adjust to mywait interface
changes.
(handle_v_kill): New.
(handle_v_stopped): Adjust to use target_pid_to_str.
(handle_v_requests): Allow multiple attaches and runs when
multiprocess extensions are in effect. Handle "vKill".
(myresume): Adjust to use ptids.
(queue_stop_reply_callback): Add `arg' parameter. Handle it.
(handle_status): Adjust to discard_queued_stop_replies interface
change.
(first_thread_of, kill_inferior_callback)
(detach_or_kill_inferior_callback, join_inferiors_callback): New.
(main): Call initialize_inferiors. Adjust to use ptids, killing
and detaching from all inferiors. Handle multiprocess packet
variants.
* linux-low.h: Include gdb_proc_service.h.
(struct process_info_private): New.
(struct linux_target_ops) <pid_of>: Use ptid_get_pid.
<lwpid_of>: Use ptid_get_lwp.
(get_lwp_thread): Adjust.
(struct lwp_info): Add `dead' member.
(find_lwp_pid): Declare.
* linux-low.c (thread_db_active): Delete.
(new_inferior): Adjust comment.
(inferior_pid): Delete.
(linux_add_process): New.
(handle_extended_wait): Adjust.
(add_lwp): Change unsigned long to ptid.
(linux_create_inferior): Add process to processes table. Adjust
to use ptids. Don't set new_inferior here.
(linux_attach_lwp): Rename to ...
(linux_attach_lwp_1): ... this. Add `initial' argument. Handle
it. Adjust to use ptids.
(linux_attach_lwp): New.
(linux_attach): Add process to processes table. Don't set
new_inferior here.
(struct counter): New.
(second_thread_of_pid_p, last_thread_of_process_p): New.
(linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
multiple processes.
(linux_kill): Add `pid' argument. Handle it. Adjust to multiple
processes. Remove process from process table.
(linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
to multiple processes.
(any_thread_of): New.
(linux_detach): Add `pid' argument, and handle it. Remove process
from processes table.
(linux_join): Add `pid' argument. Handle it.
(linux_thread_alive): Change unsighed long argument to ptid_t.
Consider dead lwps as not being alive.
(status_pending_p): Rename `dummy' argument to `arg'. Filter out
threads we're not interested in.
(same_lwp, find_lwp_pid): New.
(linux_wait_for_lwp): Change `pid' argument's type from int to
ptid_t. Adjust.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_1): ... this. Change `pid' argument's type
from int to ptid_t. Adjust.
(linux_wait_for_event): New.
(linux_wait_1): Add `ptid' argument. Change return type to
ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
that exit from the process table.
(linux_wait): Add `ptid' argument. Change return type to ptid_t.
Adjust.
(mark_lwp_dead): New.
(wait_for_sigstop): Adjust to use ptids. If a process exits while
stopping all threads, mark its main lwp as dead.
(linux_set_resume_request, linux_resume_one_thread): Adjust to use
ptids.
(fetch_register, usr_store_inferior_registers)
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers, linux_read_memory)
(linux_write_memory): Inline `inferior_pid'.
(linux_look_up_symbols): Adjust to use per-process
`thread_db_active'.
(linux_request_interrupt): Adjust to use ptids.
(linux_read_auxv): Inline `inferior_pid'.
(initialize_low): Don't reference thread_db_active.
* gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
* proc-service.c (ps_lgetregs): Use find_lwp_pid.
(ps_getpid): Return the pid of the current inferior.
* thread-db.c (proc_handle, thread_agent): Delete.
(thread_db_create_event, thread_db_enable_reporting): Adjust to
per-process data.
(find_one_thread): Change argument type to ptid_t. Adjust to
per-process data.
(maybe_attach_thread): Adjust to per-process data and ptids.
(thread_db_find_new_threads): Ditto.
(thread_db_init): Ditto.
* spu-low.c (spu_create_inferior, spu_attach): Add process to
processes table. Adjust to use ptids.
(spu_kill, spu_detach): Adjust interface. Remove process from
processes table.
(spu_join, spu_thread_alive): Adjust interface.
(spu_wait): Adjust interface. Remove process from processes
table. Adjust to use ptids.
* win32-low.c (current_inferior_tid): Delete.
(current_inferior_ptid): New.
(debug_event_ptid): New.
(thread_rec): Take a ptid. Adjust.
(child_add_thread): Add `pid' argument. Adjust to use ptids.
(child_delete_thread): Ditto.
(do_initial_child_stuff): Add `attached' argument. Add process to
processes table.
(child_fetch_inferior_registers, child_store_inferior_registers):
Adjust.
(win32_create_inferior): Pass 0 to do_initial_child_stuff.
(win32_attach): Pass 1 to do_initial_child_stuff.
(win32_kill): Adjust interface. Remove process from processes
table.
(win32_detach): Ditto.
(win32_join): Adjust interface.
(win32_thread_alive): Take a ptid.
(win32_resume): Adjust to use ptids.
(get_child_debug_event): Ditto.
(win32_wait): Adjust interface. Remove exiting process from
processes table.
|
|
* server.h (non_stop): Declare.
(gdb_client_data, handler_func): Declare.
(delete_file_handler, add_file_handler, start_event_loop):
Declare.
(handle_serial_event, handle_target_event, push_event)
(putpkt_notif): Declare.
* target.h (enum resume_kind): New.
(struct thread_resume): Replace `step' field by `kind' field.
(TARGET_WNOHANG): Define.
(struct target_ops) <wait>: Add `options' argument.
<supports_non_stop, async, start_non_stop>: New fields.
(target_supports_non_stop, target_async): New.
(start_non_stop): Declare.
(mywait): Add `options' argument.
* target.c (mywait): Add `options' argument. Print child exit
notifications here.
(start_non_stop): New.
* server.c (non_stop, own_buf, mem_buf): New globals.
(struct vstop_notif): New.
(notif_queue): New global.
(queue_stop_reply, push_event, discard_queued_stop_replies)
(send_next_stop_reply): New.
(start_inferior): Adjust to use resume_kind. Adjust to mywait
interface changes.
(attach_inferior): In non-stop mode, don't wait for the target
here.
(handle_general_set): Handle QNonStop.
(handle_query): When handling qC, return the current general
thread, instead of the first thread of the list.
(handle_query): If the backend supports non-stop mode, include
QNonStop+ in the qSupported query response.
(handle_v_cont): Adjust to use resume_kind. Handle resume_stop
and non-stop mode.
(handle_v_attach, handle_v_run): Handle non-stop mode.
(handle_v_stopped): New.
(handle_v_requests): Report support for vCont;t. Handle vStopped.
(myresume): Adjust to use resume_kind. Handle non-stop.
(queue_stop_reply_callback): New.
(handle_status): Handle non-stop mode.
(main): Clear non_stop flag on reconnection. Use the event-loop.
Refactor serial protocol handling from here ...
(process_serial_event): ... to this new function. When GDB
selects any thread, select one here. In non-stop mode, wait until
GDB acks all pending events before exiting.
(handle_serial_event, handle_target_event): New.
* remote-utils.c (remote_open): Install remote_desc in the event
loop.
(remote_close): Remove remote_desc from the event loop.
(putpkt_binary): Rename to...
(putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
(putpkt_binary): New as wrapper around putpkt_binary_1.
(putpkt_notif): New.
(prepare_resume_reply): In non-stop mode, don't change the
general_thread.
* event-loop.c: New.
* Makefile.in (OBJ): Add event-loop.o.
(event-loop.o): New rule.
* linux-low.h (pid_of): Moved here.
(lwpid_of): New.
(get_lwp_thread): Use lwpid_of.
(struct lwp_info): Delete `lwpid' field. Add `suspended' field.
* linux-low.c (pid_of): Delete.
(inferior_pid): Use lwpid_of.
(linux_event_pipe): New.
(target_is_async_p): New.
(delete_lwp): New.
(handle_extended_wait): Use lwpid_of.
(add_lwp): Don't set lwpid field.
(linux_attach_lwp): Adjust debug output. Use lwpid_of.
(linux_kill_one_lwp): If killing a running lwp, stop it first.
Use lwpid_of. Adjust to linux_wait_for_event interface changes.
(linux_detach_one_lwp): If detaching from a running lwp, stop it
first. Adjust to linux_wait_for_event interface changes. Use
lwpid_of.
(linux_detach): Don't delete the main lwp here.
(linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
(status_pending_p): Don't consider explicitly suspended lwps.
(linux_wait_for_lwp): Take an integer pid instead of a lwp_info
pointer. Add OPTIONS argument. Change return type to int. Use
my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
(linux_wait_for_event): Take an integer pid instead of a lwp_info
pointer. Add status pointer argument. Return a pid instead of a
status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
changes. In non-stop mode, don't switch to a random thread.
(linux_wait): Rename to...
(linux_wait_1): ... this. Add target_options argument, and handle
it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
don't handle the continue thread. Handle TARGET_WNOHANG. Merge
clean exit and signal exit code. Don't stop all threads in
non-stop mode. In all-stop mode, only stop all threads when
reporting a stop to GDB. Handle explicit thread stop requests.
(async_file_flush, async_file_mark): New.
(linux_wait): New.
(send_sigstop): Use lwpid_of.
(wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
interface changes. In non-stop mode, don't switch to a random
thread.
(linux_resume_one_lwp): Use lwpid_of.
(linux_continue_one_thread, linux_queue_one_thread): Merge into ...
(linux_resume_one_thread): ... this. Handle resume_stop. In
non-stop mode, don't look for pending flag in all threads.
(resume_status_pending_p): Don't consider explicitly suspended
threads.
(my_waitpid): Reimplement. Emulate __WALL.
(linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
Use lwpid_of.
(sigchld_handler, linux_supports_non_stop, linux_async)
(linux_start_non_stop): New.
(linux_target_ops): Register linux_supports_non_stop, linux_async
and linux_start_non_stop.
(initialize_low): Install SIGCHLD handler.
* thread-db.c (thread_db_create_event, find_one_thread)
(thread_db_get_tls_address): Use lwpid_of.
* win32-low.c (win32_detach): Adjust to use resume_kind.
(win32_wait): Add `options' argument.
* spu-low.c (spu_resume): Adjust to use resume_kind.
(spu_wait): Add `options' argument.
|
|
* target.h (enum target_waitkind): New.
(struct target_waitstatus): New.
(struct target_ops) <wait>: Return an unsigned long. Take a
target_waitstatus pointer instead of a char pointer.
(mywait): Likewise.
* target.c (mywait): Change prototype to return an unsigned long.
Take a target_waitstatus pointer instead of a char pointer. Adjust.
* server.h (thread_from_wait, old_thread_from_wait): Delete
declarations.
(prepare_resume_reply): Change prototype to take a
target_waitstatus.
* server.c (thread_from_wait, old_thread_from_wait): Delete.
(last_status, last_ptid): New.
(start_inferior): Remove "statusptr" argument. Adjust. Return a
pid instead of a signal.
(attach_inferior): Remove "status" and "signal" parameters.
Adjust.
(handle_query): For qGetTLSAddr, parse the thread id with strtol,
not as an address.
(handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
(handle_v_requests, myresume): Remove "status" and "signal"
parameters. Adjust.
(handle_status): New.
(main): Delete local `status'. Adjust.
* remote-utils.c: Include target.h.
(prepare_resume_reply): Change prototype to take a
target_waitstatus. Adjust.
* linux-low.c (linux_wait): Adjust to new target_ops->wait
interface.
* spu-low.c (spu_wait): Adjust.
* win32-low.c (enum target_waitkind, struct target_waitstatus):
Delete.
(win32_wait): Adjust.
|
|
(struct target_ops): Add a `n' argument to the `resume' callback.
* server.c (start_inferior): Adjust.
(handle_v_cont, myresume): Adjust.
* linux-low.c (check_removed_breakpoint): Adjust to resume
interface change, and to removed leave_stopped field.
(resume_ptr): Delete.
(struct thread_resume_array): New.
(linux_set_resume_request): Add new `arg' parameter. Adjust to
resume interface change.
(linux_continue_one_thread, linux_queue_one_thread)
(resume_status_pending_p): Check if the resume field is NULL
instead of checking the leave_stopped member.
(linux_resume): Adjust to the target resume interface change.
* spu-low.c (spu_resume): Adjust to the target resume interface
change.
* win32-low.c (win32_detach, win32_resume): Ditto.
|
|
* linux-low.c (linux_wait_for_event): Don't clear the `stepping'
flag.
(wait_for_sigstop): Don't leave a finished single-step SIGTRAP
pending.
(linux_continue_one_thread): Only preserve the stepping flag if
there's a pending breakpoint.
gdb/testsuite/
* gdb.threads/pending-step.c, gdb.threads/pending-step.exp: New.
|
|
* gdb.base/call-ar-st.exp: Set print frame-arguments to "all".
* gdb.ada/ref_param.exp: Set print frame-arguments to "all".
* gdb.ada/lang_switch.exp: Set print frame-arguments to "all".
|
|
|
|
* config/tc-xtensa.c (parse_arguments): call demand_empty_rest_of_line
|
|
* xcofflink.c (xcoff_archive_info): Add contains_shared_object_p
and know_contains_shared_object_p.
(xcoff_archive_contains_shared_object_p): Add an "info" parameter.
Cache the result in the archive_info table.
(xcoff_auto_export_p): Add an "info" parameter and update the
call to xcoff_archive_contains_shared_object_p.
(xcoff_mark_auto_exports): Update accordingly.
(xcoff_post_gc_symbol): Likewise.
|
|
* xcofflink.c (bfd_link_input_bfd): Treat __rtinit as C_HIDEXT
rather than C_EXT.
ld/testsuite/
* ld-powerpc/aix-gc-1.nd: New test.
* ld-powerpc/aix52.exp: Run it.
|
|
* coff-rs6000.c (member_layout): New structure.
(archive_iterator): Likewise.
(member_layout_init): New function.
(archive_iterator_begin): Likewise.
(archive_iterator_next): Likewise.
(xcoff_write_armap_old): Use the new iterator functions.
(do_shared_object_padding): Delete.
(xcoff_write_armap_big): Use the new iterator functions. Simplify
handling of arch_info.
(xcoff_write_archive_contents_old): Allocate arelt_data in the
first loop rather than the second. Allocate a member header if
there isn't one, then work out the stat information and length
in the first loop too. Use the new iterators for the second loop.
(xcoff_write_archive_contents_big): Likewise.
|
|
* bfd-in.h (bfd_xcoff_split_import_path): Declare.
(bfd_xcoff_set_archive_import_path): Likewise.
* bfd-in2.h: Regenerate.
* xcofflink.c: Include libiberty.h.
(xcoff_archive_info): New structure.
(xcoff_archive_info_hash): New function.
(xcoff_archive_info_eq): Likewise.
(xcoff_get_archive_info): Likewise.
(_bfd_xcoff_bfd_link_hash_table_create): Initialize archive_info.
(bfd_xcoff_split_import_path): New function.
(bfd_xcoff_set_archive_import_path): Likewise.
(xcoff_set_import_path): Move earlier in file.
(xcoff_link_add_dynamic_symbols): Set the import path of a non-archive
object to the the directory part of the bfd's filename. Get the
import path and filename of an archive object from the archive's
xcoff_tdata, initializing it if necessary. Update use of
import_file_id.
(bfd_link_input_bfd): Update use of import_file_id.
(xcoff_write_global_symbol): Likewise.
ld/
* emultempl/aix.em (gld${EMULATION_NAME}_open_dynamic_archive): New
function.
(ld_${EMULATION_NAME}_emulation): Use it.
|
|
* xcoff.h (xcoff_link_hash_table): Move to bfd/xcofflink.c.
bfd/
* xcofflink.c (xcoff_link_hash_table): Moved from include/coff/xcoff.h.
|
|
* xcofflink.c (xcoff_link_create_extra_sections): Don't create
a .loader section for relocatable links.
(xcoff_need_ldrel_p): New function.
(xcoff_mark): Use it.
(bfd_xcoff_link_count_reloc): Only count loader relocs if there's
a loader section.
(xcoff_build_ldsym): New function, split out from...
(xcoff_build_ldsyms): ...here. Rename to...
(xcoff_post_gc_symbol): ...this. Only export symbols, and only
call xcoff_build_ldsym, if there's a loader section.
(xcoff_build_loader_section): New function, extracted verbatim from...
(bfd_xcoff_size_dynamic_sections): ...here. Only call it if
there's a loader section. Only add an __rtinit loader symbol
if there's a loader section. Update after above name change.
(xcoff_symbol_section, xcoff_create_ldrel): New functions.
(bfd_link_input_bfd): Use xcoff_need_ldrel_p, xcoff_symbol_section
and xcoff_create_ldrel.
(xcoff_write_global_symbol): Use xcoff_create_ldrel.
(xcoff_reloc_link_order): Likewise, but only call it if there's
a loader section. Use xcoff_symbol_section.
(_bfd_xcoff_bfd_final_link): Only use fdinfo.ldrel and fdinfo.ldsym
if there's a loader section.
ld/testsuite/
* ld-powerpc/aix-rel-1.s, ld-powerpc/aix-rel-1.od: New test.
* ld-powerpc/aix52.exp: Run it.
|
|
(mips_gdbarch_init): Add user registers from
mips_numeric_register_aliases.
|
|
|
|
* xcofflink.c (bfd_link_input_bfd): Fix buffer overrun.
|
|
this is the last one.
|
|
(remote_vcont_resume): Use it.
|
|
* common.h (EM_INTEL178): Removed.
(EM_INTEL179): Likewise.
(EM_ETPU): New.
(EM_SLE9X): Likewise.
(EM_INTEL181): Likewise.
(EM_INTEL182): Likewise.
|
|
* dlltool.c (set_dll_name_from_def): Accept new second arg that
indicates if we are building DLL or EXE, and use it to add a
default suffix to the output filename when none is already present.
(def_name): Indicate we are building an EXE when calling it.
(def_library): Indicate we are building a DLL when calling it.
ld/testsuite/ChangeLog
* ld-cygwin/exe-export.exp: Add "-lkernel32" when linking test exe.
* ld-cygwin/testexe.c (testexe_main): Indicate whether global_a
was set to correct final value using error return status.
(testexe_dummy): Dummy function calls an import from kernel32.dll
to ensure it is mapped into the process space at runtime.
|
|
* config/tc-arm.c (arm_validate_fix): Define only for OBJ_COFF.
(find_real_start): Likewise.
* config/tc-arm.h (TC_VALIDATE_FIX): Likewise
|
|
(init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
|
|
opcodes/
* arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
ld/testsuite/
* ld-arm/arm-elf.exp: BE8 tests expect the same output as the
default ones.
* ld-arm/arm-be8.d: Print opcodes in little endian.
* ld-arm/farcall-thumb-arm-be8.d: Removed useless expected result.
* ld-arm/farcall-arm-arm-be8.d: Likewise.
|
|
bfd/
* elf32-arm.c (group_sections): Rewrite loops for better
readability.
|
|
* doc/binutils.texi (strings): Document the -V alias for the
--version option.
* strings.c (usage): Likewise.
|
|
(arm_handle_align): Generate v6k ARM, thumb2 wide & narrow nops
whenever possible.
testsuite/
* gas/arm/align.s, gas/arm/align.d: New.
* gas/arm/thumb32.d, gas/arm/arch6zk.d, gas/arm/arch6zk.s,
arm/thumb2_relax.d: Adjust for align changes.
|
|
* config/tc-ppc.c (ppc_handle_align): Handle power7's group ending nop.
gas/testsuite/
* gas/ppc/power7.d ("ori", ".p2align"): Add tests for group ending nop.
* gas/ppc/power7.s: Likewise.
* gas/ppc/power6.d: Likewise.
* gas/ppc/power6.s: Likewise.
|
|
|
|
|
|
|
|
remote_close before exiting gdbserver.
|
|
|
|
* common.h (EM_INTEL178): New.
(EM_INTEL179): Likewise.
(EM_INTEL180): Likewise.
|
|
2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
Keith Seitz <keiths@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/6817
* Makefile.in (dbxread.o): Update.
* dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
* dwarf2read.c (GDB_FORM_cached_string): New.
(read_partial_die): Use dwarf2_canonicalize_name.
(dwarf2_linkage_name): Use dwarf2_name.
(dwarf2_canonicalize_name): New.
(dwarf2_name): Use dwarf2_canonicalize_name.
(dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
* stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
* symtab.c (lookup_symbol_in_language): Canonicalize input before
searching.
* cp-name-parser.y: operator() requires two parameters,
according to libiberty.
* minsyms.c (lookup_minimal_symbol): Canonicalize input
before searching.
* NEWS: Update.
gdb/testsuite
2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/931
* gdb.cp/gdb1355.exp (f_li, f_lui, f_si, f_sui): Allow canonical
output.
* gdb.cp/templates.exp: Allow canonical output. Remove KFAILs
for gdb/931.
* dw2-strp.S (DW_AT_language): Change to C++.
(DW_TAG_variable (name ""), Abbrev code 7, .Lemptyname): New.
|
