aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-08-20 * binutils-all/nm.exp: Xfail test for nm --size-sort forHans-Peter Nilsson2-0/+9
mmix-knuth-mmixware.
2013-08-20daily updateAlan Modra1-1/+1
2013-08-19gas/Richard Sandiford64-1627/+1675
* config/tc-mips.c (mips_check_isa_supports_ase, reg_lookup) (mips_parse_argument_token, validate_micromips_insn, md_begin) (check_regno, match_float_constant, check_completed_insn, append_insn) (match_insn, match_mips16_insn, match_insns, macro_start) (macro_build_ldst_constoffset, load_register, macro, mips_ip) (mips16_ip, mips_set_option_string, md_parse_option) (mips_after_parse_args, mips_after_parse_args, md_pcrel_from) (md_apply_fix, s_align, s_option, s_mipsset, s_tls_rel_directive) (s_gpword, s_gpdword, s_ehword, s_nan, tc_gen_reloc, md_convert_frag) (s_mips_end, s_mips_ent, s_mips_frame, s_mips_mask, mips_parse_cpu): Start error messages with a lower-case letter. Do not end error messages with a period. Wrap long messages to 80 character-lines. Use "cannot" instead of "can't" and "can not". gas/testsuite/ * gas/mips/ase-errors-1.l, gas/mips/ase-errors-2.l, gas/mips/ase-errors-3.l, gas/mips/ase-errors-4.l, gas/mips/at-2.l, gas/mips/baddata1.l, gas/mips/elf-rel30.l, gas/mips/illegal.l, gas/mips/jalr.l, gas/mips/ldstla-32-1.l, gas/mips/ldstla-32-mips3-1.l, gas/mips/lui-1.l, gas/mips/macro-warn-1.l, gas/mips/macro-warn-1-n32.l, gas/mips/macro-warn-2.l, gas/mips/macro-warn-3.l, gas/mips/macro-warn-4.l, gas/mips/micromips-branch-delay.l, gas/mips/micromips-branch-relax.l, gas/mips/micromips-branch-relax-pic.l, gas/mips/micromips-ill.l, gas/mips/micromips.l, gas/mips/micromips-size-0.l, gas/mips/micromips-size-1.l, gas/mips/micromips-warn-branch-delay.l, gas/mips/micromips-warn.l, gas/mips/mips16e-64.l, gas/mips/mips16e-save-err.l, gas/mips/mips1-fp.l, gas/mips/mips32r2-fp32.l, gas/mips/mips32r2-ill.l, gas/mips/mips32-sf32.l, gas/mips/mips4-branch-likely.l, gas/mips/mips4-fp.l, gas/mips/mips5-fp.l, gas/mips/mips64-mips3d.l, gas/mips/mips-double-float-flag.l, gas/mips/mips-gp64-fp32.l, gas/mips/mips-gp64-fp64.l, gas/mips/mips-hard-float-flag.l, gas/mips/mips-macro-ill-nofp.l, gas/mips/mips-macro-ill-sfp.l, gas/mips/nan-error-1.l, gas/mips/nan-error-2.l, gas/mips/noat-2.l, gas/mips/noat-3.l, gas/mips/noat-4.l, gas/mips/noat-5.l, gas/mips/noat-6.l, gas/mips/noat-7.l, gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l, gas/mips/r5900-nollsc.l, gas/mips/relax-bc1any.l, gas/mips/relax-bposge.l, gas/mips/relax.l, gas/mips/relax-swap1.l, gas/mips/relax-swap2.l, gas/mips/set-arch.l, gas/mips/tls-ill.l, gas/mips/vr5400-ill.l: Adjust expected output.
2013-08-19gas/Richard Sandiford2-78/+48
* config/tc-mips.c (imm_expr): Expand comment. (set_at, macro, mips16_macro): Expect imm_expr to be O_constant when populated.
2013-08-19include/opcode/Richard Sandiford4-25/+17
* mips.h: Remove references to "+I" and imm2_expr. gas/ * config/tc-mips.c (imm2_expr): Delete. (md_assemble, match_insn, imm2_expr.X_op, mips_ip): Update accordingly.
2013-08-19include/opcode/Richard Sandiford16-220/+118
* mips.h (M_DEXT, M_DINS): Delete. opcodes/ * micromips-opc.c (micromips_opcodes): Replace "dext" and "dins" macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases. Use +H rather than +C for the real "dext". * mips-opc.c (mips_builtin_opcodes): Likewise. gas/ * config/tc-mips.c (report_bad_range, report_bad_field): Delete. (macro): Remove M_DEXT and M_DINS handling. gas/testsuite/ * gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS error messages to have the same form as the EXT and INS ones. * gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d, gas/mips/micromips.d, gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect "dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-19gas/Richard Sandiford2-179/+191
* config/tc-mips.c (mips_arg_info): Replace allow_nonconst and lax_max with lax_match. (match_int_operand): Update accordingly. Don't report an error for !lax_match-only cases. (match_insn): Replace more_alts with lax_match and use it to initialize the mips_arg_info field. Add a complete_p parameter. Handle implicit VU0 suffixes here. (match_invalid_for_isa, match_insns, match_mips16_insns): New functions. (mips_ip, mips16_ip): Use them.
2013-08-19gas/Richard Sandiford6-36/+51
* config/tc-mips.c (match_expression): Report uses of registers here. Add a "must be an immediate expression" error. Handle elided offsets here rather than... (match_int_operand): ...here. gas/testsuite/ * gas/mips/octeon-ill.l: Adjust expected output. * gas/mips/lui-1.l, gas/mips/lui-1.s: Add more cases.
2013-08-19gas/Richard Sandiford18-302/+332
* config/tc-mips.c (mips_arg_info): Remove soft_match. (match_out_of_range, match_not_constant): New functions. (match_const_int): Remove fallback parameter and check for soft_match. Use match_not_constant. (match_mapped_int_operand, match_addiusp_operand) (match_perf_reg_operand, match_save_restore_list_operand) (match_mdmx_imm_reg_operand): Update accordingly. Use match_out_of_range and set_insn_error* instead of as_bad. (match_int_operand): Likewise. Use match_not_constant in the !allows_nonconst case. (match_float_constant): Report invalid float constants. (match_insn, match_mips16_insn): Remove soft_match code. Rely on match_float_constant to check for invalid constants. Fail the match if match_const_int or match_float_constant return false. (mips_ip): Update accordingly. (mips16_ip): Likewise. Undo null termination of instruction name once lookup is complete. gas/testsuite/ * gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips16e-64.l, gas/mips/mips32r2-ill-fp64.l, gas/mips/mips32r2-ill-nofp.l, gas/mips/mips32r2-ill.l, gas/mips/mips64r2-ill.l, gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l, gas/mips/vr5400-ill.l: Adjust expected errors. * gas/mips/micromips-size-0.l, gas/mips/micromips-size-0.s: Likewise. Add new tests. * gas/mips/mips16e-save-err.s, gas/mips/mips16e-save-err.l: New test. * gas/mips/mips.exp: Run it.
2013-08-19gas/Richard Sandiford4-70/+213
* config/tc-mips.c (mips_insn_error_format): New enum. (mips_insn_error): New struct. (insn_error): Change to a mips_insn_error. (clear_insn_error, set_insn_error_format, set_insn_error) (set_insn_error_i, set_insn_error_ss, report_insn_error): New functions. (mips_parse_argument_token, md_assemble, match_insn) (match_mips16_insn): Use them instead of manipulating insn_error directly. (mips_ip, mips16_ip): Likewise. Simplify control flow. gas/testsuite/ * gas/mips/micromips-ill.l: Expect "floating-point expression required"
2013-08-19gas/Richard Sandiford2-499/+536
* config/tc-mips.c (normalize_constant_expr): Move further up file. (normalize_address_expr): Likewise. (match_insn, match_mips16_insn): New functions, split out from... (mips_ip, mips16_ip): ...here.
2013-08-19include/opcode/Richard Sandiford10-68/+96
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-19 gdb/Luis Machado10-56/+148
* Makefile.in (SFILES): Remove common/target-common.c and add target/waitstatus.c. (HFILES_NO_SRCDIR): Remove common/target-common.h and add target/resume.h, target/wait.h and target/waitstatus.h. (COMMON_OBS): Remove target-common.o and add waitstatus.o. (target-common.o): Remove. (waitstatus.o): New target object file. * common/target-common.c: Move contents to target/waitstatus.c and remove. * common/target-common.h: Move contents to other files and remove. (enum resume_kind: Move to target/resume.h. (TARGET_WNOHANG): Move to target/wait.h. (enum target_waitkind): Move to target/waitstatus.h. (struct target_waitstatus): Likewise. * target.h: Do not include target-common.h and include target/resume.h, target/wait.h and target/waitstatus.h. * target/resume.h: New file. * target/wait.h: New file. * target/waitstatus.h: New file. * target/waitstatus.c: New file. gdb/gdbserver/ * Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../. (SFILES): Remove $(srcdir)/common/target-common.c and add $(srcdir)/target/waitstatus.c. (OBS): Remove target-common.o and add waitstatus.o. (server_h): Remove $(srcdir)/../common/target-common.h and add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h and $(srcdir)/../target/waitstatus.h. (target-common.o): Remove. (waitstatus.o): New target object file. * target.h: Do not include target-common.h and include target/resume.h, target/wait.h and target/waitstatus.h.
2013-08-19Remove PREFIX_EVEX_0F3A3E and PREFIX_EVEX_0F3A3FH.J. Lu3-16/+8
* i386-dis.c (PREFIX_EVEX_0F3A3E): Removed. (PREFIX_EVEX_0F3A3F): Likewise. * i386-dis-evex.h (evex_table): Updated.
2013-08-19binutils/Tristan Gingold6-8/+74
2013-08-19 Tristan Gingold <gingold@adacore.com> * nm.c (print_size_symbols): Directly get symbol size. binutils/testsuite/ 2013-08-19 Tristan Gingold <gingold@adacore.com> * binutils-all/nm.exp: Add a test for nm --size-sort * binutils-all/nm-elf-1.s: New file. * binutils-all/nm-1.s: New file.
2013-08-19linux-nat.c: no need to block child signals so aggressively.Pedro Alves2-45/+22
In http://sourceware.org/ml/gdb-patches/2013-08/msg00174.html , the issue of child signal handling around ptrace option support discovery being different between GDB and GDBserver came up. I recalled adding these block_child_signals calls, and the "We don't want those ptrace calls to be interrupted" comment, but not exactly why. So I looked into it. My first guess is that I got confused. The patch that added this <http://sourceware.org/ml/gdb-patches/2009-04/msg00125.html> rewrote the linux native async support completely, and the old async support code had the SIGCHLD handler itself do waitpid, so in places that we'd want a blocking waitpid, we'd have to have the signal handler blocked. That was probably the mindset I had at the time. Anyway, whatever the case, looks like I was wrong on the need for this blocking. Given GDBserver doesn't block like this, I investigated why this is currently needed on GDB but not on GDBserver. I removed the block_child_signals (and restore) calls, and hacked linux-nat.c to call linux_test_for_tracefork in a loop, like: @@ -534,7 +534,10 @@ static int linux_supports_tracefork (int pid) { if (linux_supports_tracefork_flag == -1) - linux_test_for_tracefork (pid); + { + while (1) + linux_test_for_tracefork (pid); + } return linux_supports_tracefork_flag; } Running the resulting GDB, I then saw bad things happening. Specifically, I'd end up with a bunch of zombies, and eventually, the machine would refuse to spawn new processes, claming insufficient resources. The issue is that linux_test_for_tracefork test forks, and has the child fork again. If we don't block SIGCHLD on entry to the function, the children will inherit SIGCHLD's action/disposition (meaning, SIGCHLD will be unblocked in the child). When the first child forks again a second child, and that child exits, the first child gets a SIGCHLD. Now, when we try to wrap up for the whole options test, we kill the first child, and collect the waitstatus. Here, when SIGCHLD isn't blocked, GDB will first see the child reporting a stop with SIGCHLD. gdbserver's ptrace options test does a PTRACE_KILL loop at the end, which catches the SIGCHLD, and retries the kill. The GDB version did not do that. So the GDB version would proceed, leaving the child zombie (until GDB exists), as nothing collected its final waitstatus. So this patch makes the GDB version of linux_test_for_tracefork do the exact same as the GDBserver version, removes all this unnecessary blocking throughout, and adds a couple comments at places that do need it -- namely: places where we'll use sleep with sigsuspend; and linux_async_pipe, as that destroys the pipe the signal handler touches. Tested on x86_64 Fedora 17, sync and async. gdb/ 2013-08-19 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_test_for_tracefork) (linux_test_for_tracesysgood, linux_child_follow_fork) (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals. (linux_nat_wait_1): Extend comment. (linux_async_pipe): Add comment.
2013-08-19daily updateAlan Modra1-1/+1
2013-08-18daily updateAlan Modra1-1/+1
2013-08-17src-release: Strip "-cvs" from GDB source dir and tarball.Joel Brobecker2-1/+6
The nightly snapshots we have been creating in the past did not include the "-cvs" suffix at the end of the version number. Snapshot packaging started breaking ever since GDB switched to using BFD's version number. Things got partially fixed with the previous change to this file, but the change missed the fact that the "-cvs" suffix in the tarball name (Eg: gdb-7.6.50-20130816-cvs.tar) is undesirable. This patch removes it. ChangeLog: * src-release (VER): When using $(TOOL)/common/create-version.sh, strip the "-cvs" suffix from the version number if present.
2013-08-17daily updateAlan Modra1-1/+1
2013-08-16gold/Roland McGrath3-0/+30
* i386.cc (Target_i386_nacl::do_code_fill): New virtual function. * x86_64.cc (Target_x86_64_nacl::do_code_fill): New virtual function.
2013-08-16 * lib/prelink-support.exp (prelink_yes): Flag test as unsupported ifDoug Evans2-0/+10
prelink complains about an unhandled DWARF version.
2013-08-16 * config/tc-ppc.c (ppc_elf_cons): Allow @l and other relocAlan Modra2-2/+6
modifiers generally.
2013-08-16 * config/tc-ppc.c (ppc_elf_lcomm): Use subsection 1.Alan Modra2-8/+11
2013-08-16Make RL78_PC_REGNUM a pseudo-register in rl78-tdep.c.Kevin Buettner2-6/+37
2013-08-16daily updateAlan Modra1-1/+1
2013-08-152013-08-15 Muhammad Bilal <mbilal@codesourcery.com>Muhammad Bilal2-1/+8
PR cli/15841 * top.c (quit_force): Skip writing history file if input is not from terminal.
2013-08-15 * ldexp.c: Add LOG2CEIL() builtin function to linker script languageNick Clifton10-4/+96
* ldgram.y: Likewise * ldlex.l: Likewise * NEWS: Mention the new feature. * ld.texinfo: Document the new feature. * ld-scripts/log2.exp: New: Run the new log2 test. * ld-scripts/log2.s: Source for the new test. * ld-scripts/log2.t: Linker script for new test.
2013-08-15daily updateAlan Modra1-1/+1
2013-08-14 * config/tc-ppc.c (ppc_comm): Accept optional fourth .lcommDavid Edelsohn2-5/+24
argument as alignment.
2013-08-14 * boards/fission.exp: Add -fdebug-types-section to debug_flags.Doug Evans2-1/+5
2013-08-14move some static thread state into remote_stateTom Tromey2-19/+31
This moves a few static variables from thread-info functions into remote_state. Pedro said on irc that these functions implement the ancient thread-discovery method and that he wouldn't be surprised if they had rotted; nevertheless it seems safer to me to make them explicitly per-remote. This necessitated moving a couple of macros and a typedef earlier in the file. * remote.c (struct remote_state) <echo_nextthread, nextthread, resultthreadlist>: New fields. (OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier. (remote_get_threadlist, remote_threadlist_iterator): Use new fields. Remove static variables.
2013-08-14move remote_stopped_by_watchpoint_p and remote_watch_data_address into ↵Tom Tromey2-16/+25
remote_state This moves the globals remote_stopped_by_watchpoint_p and remote_watch_data_address into remote_state. * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p, remote_watch_data_address>: New fields. (remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove. (process_stop_reply, remote_wait_as) (remote_check_watch_resources, remote_stopped_data_address): Update.
2013-08-14move async_client_callback and async_client_context into remote_stateTom Tromey2-7/+17
This moves async_client_callback and async_client_context into remote_state. * remote.c (struct remote_state) <async_client_callback, async_client_context>: New fields. (async_client_callback, async_client_context): Remove. (remote_async_serial_handler, remote_async): Update.
2013-08-14move sizeof_pkt into remote_trace_findTom Tromey2-3/+6
The global sizeof_pkt is only used in remote_trace_find, like so: reply = remote_get_noisy_reply (&(rs->buf), &sizeof_pkt); I think in this situation it is more correct to use the recorded size of the buffer. Otherwise it seems that some skew could result. * remote.c (sizeof_pkt): Remove. (remote_trace_find): Use rs->buf_size, not sizeof_pkt.
2013-08-14move use_threadinfo_query and use_threadextra_query into struct remote_stateTom Tromey2-17/+23
This moves the use_threadextra_query and use_threadinfo_query globals into remote_state. * remote.c (struct remote_state) <use_threadinfo_query, use_threadextra_query>: New fields. (remote_threads_info, remote_threads_extra_info) (remote_open_1): Update.
2013-08-14move some statics from remote_read_qxfer into struct remote_stateTom Tromey2-15/+22
This moves a few static variables out of remote_read_qxfer and into remote_state. * remote.c (struct remote_state) <finished_object, finished_annex, finished_offset>: New fields. (remote_read_qxfer): Use remote_state fields; remove static variables.
2013-08-14push last_sent_step into struct remote_stateTom Tromey2-4/+11
This moves the global last_sent_step into remote_state. * remote.c (struct remote_state) <last_sent_step>: New field. (last_sent_step): Remove. (remote_resume, remote_wait_as): Update.
2013-08-14push last_sent_signal into struct remote_stateTom Tromey2-6/+14
This moves the global last_sent_signal into remote_state. * remote.c (struct remote_state) <last_sent_signal>: New field. (last_sent_signal): Remove. (new_remote_state, remote_resume, remote_wait_as): Update.
2013-08-14push last_program_signals_packet into struct remote_stateTom Tromey2-14/+20
This moves the global last_program_signals_packet into remote_state. * remote.c (struct remote_state) <last_program_signals_packet>: New field. (last_program_signals_packet): Remove. (remote_program_signals, remote_open_1): Update.
2013-08-14push last_pass_packet into struct remote_stateTom Tromey2-9/+16
This moves the global last_pass_packet into remote_state. * remote.c (struct remote_state) <last_pass_packet>: New field. (last_pass_packet): Remove. (remote_pass_signals, remote_open_1): Update.
2013-08-14push remote_traceframe_number into struct remote_stateTom Tromey2-8/+18
This moves the global remote_traceframe_number into remote_state. * remote.c (struct remote_state) <remote_traceframe_number>: New field. (remote_traceframe_number): Remove. (new_remote_state, remote_open_1, set_remote_traceframe) (remote_trace_find): Update.
2013-08-14push general_thread and continue_thread into struct remote_stateTom Tromey2-20/+26
This moves the globals general_thread and continue_thread into remote_state. * remote.c (struct remote_state) <general_thread, continue_thread>: New fields. (general_thread, continue_thread): Remove. (record_currthread, set_thread, set_general_process) (remote_open_1, extended_remote_attach_1, remote_wait_as) (extended_remote_mourn_1): Update.
2013-08-14push remote_desc into struct remote_stateTom Tromey2-40/+69
This moves the "remote_desc" global into remote_state. * remote.c (struct remote_state) <remote_desc>: New field. (remote_desc): Remove. (remote_threads_info, remote_threads_extra_info, remote_close) (send_interrupt_sequence, remote_start_remote, remote_open_1) (readchar, remote_xfer_partial, remote_rcmd, packet_command) (remote_hostio_send_command, remote_file_put, remote_file_get) (remote_file_delete, remote_can_async_p, remote_is_async_p) (remote_async, remote_new_objfile, set_range_stepping): Update.
2013-08-14Add new_remote_stateTom Tromey2-7/+27
Add new_remote_state and change remote_state to be a pointer. This is a preparatory patch for a later series. It could perhaps be omitted, but new_remote_state also does some initialization that was previously done for the globals. * remote.c (remote_state): Now a pointer. (get_remote_state_raw): Update. (new_remote_state): New function. (_initialize_remote): Use new_remote_state.
2013-08-14make remote_protocol_features "const"Tom Tromey2-1/+5
This is a trivial patch to make remote_protocol_features "const". * remote.c (remote_protocol_features): Now const.
2013-08-14use the libiberty crc codeTom Tromey2-31/+6
gdb has a copy of some CRC code that also appears in libiberty. This patch just removes the local copy. You may notice that "crc32" returns unsigned long but "xcrc32" returns unsigned int. However, this does not matter, because crc32 actually does all its operations in unsigned int type, and only the return result is widened. So, the difference does not matter. * remote.c (crc32_table, crc32): Remove. (remote_verify_memory): Use xcrc32.
2013-08-14 PR ld/15787Nick Clifton14-29/+72
* elf32-arm.c (elf32_arm_final_link_relocate): Use origin of output segment containing the relocating symbol instead of assuming 0 for sb group relocations. * ld-arm/group-relocs-ldr-bad.s: Redefine bar into foo section beyond 16 bit offset width. * ld-arm/group-relocs-ldrs-bad.s: Likewise. * ld-arm/group-relocs-ldr-bad.d: Adjust expected result. * ld-arm/group-relocs-ldrs-bad.d: Likewise. * ld-arm/group-relocs.s: Add comments. Move symbols used for sb group relocations into .data section. Drop section zero. Use pc/r0 as base register when pc/sb group relocations are used. * ld-arm/group-relocs.d: Adjust expected result. * ld-arm/group-relocs-alu-bad-2.d: New test for sb group relocation. * ld-arm/group-relocs-ldc-bad-2.d: Likewise. * ld-arm/group-relocs-ldr-bad-2.d: New test for pc group relocation. * ld-arm/group-relocs-ldrs-bad-2.d: Likewise. * ld-arm/unresolved-2.d: Add sb relocation failure test. * ld-arm/group-relocs-alu-bad-2.s: New test source. * ld-arm/group-relocs-ldr-bad-2.s: Likewise. * ld-arm/group-relocs-ldrs-bad-2.s: Likewise. * ld-arm/group-relocs-ldc-bad-2.s: Likewise. * ld-arm/unresolved-2.s: Likewise. * ld-arm/arm-elf.exp: For group-relocs, drop section zero start definition. Run the new tests.
2013-08-14 Remove unneeded src/gdb prefix for source file namePierre Muller1-1/+1
2013-08-14 * linux-arm-low.c: Rename all occurrences of PTRACE_ARG3_TYPELuis Machado4-58/+68
to PTRACE_TYPE_ARG3. * linux-low.c: Rename all occurrences of PTRACE_ARG3_TYPE to PTRACE_TYPE_ARG3 and PTRACE_ARG4_TYPE to PTRACE_TYPE_ARG4. * linux-low.h (PTRACE_ARG3_TYPE): Rename to PTRACE_TYPE_ARG3. (PTRACE_ARG4_TYPE): Rename to PTRACE_TYPE_ARG4.
generated by cgit v1.1 at 2024-12-29 12:43:49 +0000