| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Not only that sim/configure.ac does not AC_SUBST CXXFLAGS,
unless we need C++ compiler like CXX, substitution @CXXFLAGS@ is useless.
Because of this, this commit removes this substitution.
|
|
|
|
Since
commit 837e225ba1992f9745e5bbbd5e8443243a7f475f
Author: Jan Beulich <jbeulich@suse.com>
Date: Thu Oct 20 10:01:12 2022 +0200
x86: re-work AVX-VNNI support
moved AVX-VNNI after AVX512-VNNI, vector Disp8 is applied even when VEX
encoding is selected. Check VEX/EVEX encoding before checking vector
operands to avoid vector Disp8 with VEX encoding.
PR gas/29708
* config/tc-i386.c (match_template): Check VEX/EVEX encoding
before checking vector operands.
* testsuite/gas/i386/avx-vnni.d: Updated.
* testsuite/gas/i386/x86-64-avx-vnni.d: Likewise.
* testsuite/gas/i386/avx-vnni.s: Add a Disp32 test.
* testsuite/gas/i386/x86-64-avx-vnni.s: Likewise.
|
|
In a later commit in this series I will propose removing all of the
explicit gdbpy_initialize_* calls from python.c and replace these
calls with a more generic mechanism.
One of the side effects of this generic mechanism is that the order in
which the various Python sub-systems within GDB are initialized is no
longer guaranteed.
On the whole I don't think this matters, most of the sub-systems are
independent of each other, though testing did reveal a few places
where we did have dependencies, though I don't think those
dependencies were explicitly documented in comment anywhere.
This commit is similar to the previous one, and fixes the second
dependency issue that I found.
In this case the finish_breakpoint_object_type uses the
breakpoint_object_type as its tp_base, this means that
breakpoint_object_type must have been initialized with a call to
PyType_Ready before finish_breakpoint_object_type can be initialized.
Previously we depended on the ordering of calls to
gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in
python.c.
After this commit a new function gdbpy_breakpoint_init_breakpoint_type
exists, this function ensures that breakpoint_object_type has been
initialized, and can be called from any gdbpy_initialize_* function.
I feel that this change makes the dependency explicit, which I think
is a good thing.
There should be no user visible changes after this commit.
|
|
In a later commit in this series I will propose removing all of the
explicit gdbpy_initialize_* calls from python.c and replace these
calls with a more generic mechanism.
One of the side effects of this generic mechanism is that the order in
which the various Python sub-systems within GDB are initialized is no
longer guaranteed.
On the whole I don't think this matters, most of the sub-systems are
independent of each other, though testing did reveal a few places
where we did have dependencies, though I don't think those
dependencies were explicitly documented in a comment anywhere.
This commit removes the first dependency issue, with this and the next
commit, all of the implicit inter-sub-system dependencies will be
replaced by explicit dependencies, which will allow me to, I think,
clean up how the sub-systems are initialized.
The dependency is around the py_insn_type. This type is setup in
gdbpy_initialize_instruction and used in gdbpy_initialize_record.
Rather than depend on the calls to these two functions being in a
particular order, in this commit I propose adding a new function
py_insn_get_insn_type. This function will take care of setting up the
py_insn_type type and calling PyType_Ready. This helper function can
be called from gdbpy_initialize_record and
gdbpy_initialize_instruction, and the py_insn_type will be initialized
just once.
To me this is better, the dependency is now really obvious, but also,
we no longer care in which order gdbpy_initialize_record and
gdbpy_initialize_instruction are called.
There should be no user visible changes after this commit.
|
|
Some int to bool conversion in breakpoint.c. I've only updated the
function signatures of static functions, but I've updated some
function local variables throughout the file.
There should be no user visible changes after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
I noticed that we could make use of a scoped_restore in the function
unduplicated_should_be_inserted. I've also converted the function
return type from int to bool.
This change shouldn't make any difference, as I don't think anything
within should_be_inserted could throw an exception, but the change
doesn't hurt, and will help keep us safe if anything ever changes in
the future.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
I was doing some int to bool cleanup in update_watchpoint, and I
noticed a manual version of scoped_restore_selected_frame. As always
when these things are done manually, there is the chance that, in an
error case, we might leave the wrong frame selected.
This commit updates things to use scoped_restore_selected_frame, and
also converts a local variable from int to bool.
The only user visible change after this commit is in the case where
update_watchpoint throws an error - we should now correctly restore
the previously selected frame. Otherwise, this commit should be
invisible to the user.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
I spotted a few places where I could make some 'bp_location *'
arguments constant in breakpoint.c.
There should be no user visible changes after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
supplied"
Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the
change originally done in commit 69961a84c9b ("Don't build
readline/libreadline.a, when --with-system-readline is supplied").
Re-apply it.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18632
|
|
By putting the templates after their AVX512 counterparts, the AVX512
flavors will be picked by default. That way the need to always use {vex}
ceases to exist once respective CPU features (AVX512-VNNI or AVX512VL as
a whole) have been disabled. This way the need for the PseudoVexPrefix
attribute also disappears.
|
|
With test-case gdb.debuginfod/fetch_src_and_symbols.exp and check-read1, I run
into:
...
(gdb) FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: \
file fetch_src_and_symbols (got interactive prompt)
...
The problem is that this output:
...
Enable debuginfod for this session? (y or [n]) y^M
...
is matched using regexp "Enable debuginfod?.*" with matches only the first two
words of the output, after which an implicit clause in gdb_test_multiple triggers
on the second part containing the interactive prompt.
Fix this by included the interactive prompt in the regexp.
Tested on x86_64-linux.
|
|
With test-case gdb.mi/mi-disassemble.exp and check-read1 I run into:
...
FAIL: gdb.mi/mi-disassemble.exp: disassemble /b main
FAIL: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x400549)"
...
The problem for both FAILs is that the output is parsed using
gdb_test_multiple, which has implicit clauses using $gdb_prompt, which can
match before the explicit clauses using $mi_gdb_prompt.
Fix this by passing -prompt "$mi_gdb_prompt$" to gdb_test_multiple.
Tested on x86-64-linux.
|
|
Fix dependencies for eaarch64pe.c. Generated files aren't handled
fully automatically.
|
|
|
|
Second patch incorporates fixes for endian and UB issues in calc_hash, as per
https://sourceware.org/pipermail/binutils/2022-October/123514.html.
|
|
See the remarks in rtld-step.exp for a description of what this
test is about.
This test case has been tested using gcc on the following x86-64 Linux
distributions/releases:
Fedora 28
Fedora 32
Fedora 33
Fedora 34
Fedora 35
Fedora 36
Fedora 37
rawhide (f38)
RHEL 9.1
Ubuntu 22.04.1 LTS
It's also been tested (and found to be working) with
RUNTESTFLAGS="CC_FOR_TARGET=clang" on all of the above expect for
Fedora 28. The (old) version of clang available on F28 did not
accept the -static-pie option.
I also tried to make this test work on FreeBSD 13.1. While I think I
made significant progress, I was ultimately stymied by this message
which occurs when attempting to run the main program which has been
set to use the fake/pretend RTLD as the ELF interpreter:
ELF interpreter /path/to/rtld-step-rtld not found, error 22
I have left one of the flags (-static) in place which I believe
to be needed for FreeBSD (though since I never got it to work, I
don't know for sure.) I've also left some declarations needed
for FreeBSD in rtld-step-rtld.c. They're currently disabled via
a #if 0; you'll need to enable them if you want to try to make
it work on FreeBSD.
|
|
At present, GDB does not allow for the debugging of the runtime loader
and/or dynamic linker. Much of the time, this makes sense. An
application programmer doesn't normally want to see symbol resolution
code when stepping into a function that hasn't been resolved yet.
But someone who wishes to debug the runtime loader / dynamic linker
might place a breakpoint in that code and then wish to debug it
as normal. At the moment, this is not possible. Attempting to step
will cause GDB to internally step (and not stop) until code
unrelated to the dynamic linker is reached.
This commit makes a minor change to infrun.c which allows the dynamic
loader / linker to be debugged in the case where a step, next, etc.
is initiated from within that code.
While developing this fix, I tried some approaches which weren't quite
right. The GDB testusite definitely contains tests which FAIL when
it's done incorrectly. (At one point, I saw 17 regressions!) This
commit has been tested on x86-64 linux with no regressions.
|
|
Unlike other substitution, this substitution of @PROGRAM@ was done in
binutils/Makefile and it was intended for binutils/cxxfilt.man. @PROGRAM@
in binutils/cxxfilt.man is removed in the commit 0285c67df190 ("Automate
generate on man pages") in 2001 and @PROGRAM@ is ineffective since then.
Because PROGRAM substitution does nothing, removing this manual
substitution should be completely safe.
binutils/ChangeLog:
* doc/local.mk: Remove unused substitution PROGRAM.
* Makefile.in: Regenerate.
|
|
|
|
* config.bfd: Obsolete *-*-beos*. Simplify x86 beos match.
|
|
|
|
With the cc-with-tweaks.sh patch submitted here (
https://sourceware.org/pipermail/gdb-patches/2022-October/192586.html ) we run
with:
...
$ export STRIP_ARGS_STRIP_DEBUG=--strip-all
$ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \
--target_board cc-with-gnu-debuglink"
...
into the following assert:
...
(gdb) run ^M
Starting program: jit-reader ^M
gdb/jit.c:1247: internal-error: jit_event_handler: \
Assertion `jiter->jiter_data != nullptr' failed.^M
...
Fix this by handling the
jit_bp_sym.objfile->separate_debug_objfile_backlink != nullptr case in
handle_jit_event.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29277
|
|
Currently, every internal_error call must be passed __FILE__/__LINE__
explicitly, like:
internal_error (__FILE__, __LINE__, "foo %d", var);
The need to pass in explicit __FILE__/__LINE__ is there probably
because the function predates widespread and portable variadic macros
availability. We can use variadic macros nowadays, and in fact, we
already use them in several places, including the related
gdb_assert_not_reached.
So this patch renames the internal_error function to something else,
and then reimplements internal_error as a variadic macro that expands
__FILE__/__LINE__ itself.
The result is that we now should call internal_error like so:
internal_error ("foo %d", var);
Likewise for internal_warning.
The patch adjusts all calls sites. 99% of the adjustments were done
with a perl/sed script.
The non-mechanical changes are in gdbsupport/errors.h,
gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
|
|
symbol version information.
PR 29699
* elf.c (_bfd_elf_slurp_version_tables): Fail if the sh_info field
of the section header is zero.
|
|
When building the iq2000 simulator I see a few warnings like this:
/tmp/build/sim/../../src/sim/iq2000/iq2000.c: In function ‘fetch_str’:
/tmp/build/sim/../../src/sim/iq2000/iq2000.c:50:54: error: pointer targets in passing argument 3 of ‘sim_read’ differ in signedness [-Werror=pointer-sign]
50 | sim_read (CPU_STATE (current_cpu), CPU2DATA(addr), buf, nr);
| ^~~
| |
| char *
I've silenced these warnings by casting buf to 'unsigned char *'.
With this change I now see no warnings when compiling iq2000.c, so
I've removed the line from Makefile.in that disables -Werror.
Makefile.in was also disabling -Werror when compiling mloop.c,
however, I'm not seeing any warnings when compiling that file, so I've
removed the -Werror disable in that case too.
|
|
When building the erc32 simulator I get a few warnings like this:
/tmp/build/sim/../../src/sim/erc32/exec.c:1377:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
1377 | sregs->fs[rd] = *((float32 *) & ddata[0]);
| ~^~~~~~~~~~~~~~~~~~~~~~~
The type of '& ddata[0]' will be 'uint32_t *', which is what triggers
the warning.
This commit makes use of memcpy when performing the type-punning,
which resolves the above warnings.
With this change, I now see no warnings when compiling exec.c, which
means that the line in Makefile.in that disables -Werror can be
removed.
There should be no change in behaviour after this commit.
|
|
The device_error function always ends up calling the error function,
which is itself marked as ATTRIBUTE_NORETURN, so it makes sense that
device_error should also be marked ATTRIBUTE_NORETURN.
Doing this resolves a few warnings from hw_ide.c about possibly
uninitialized variables - the variables are only uninitialized after
passing through a call to device_error, which obviously means the
variables are never really used uninitialized, the simulation will
terminate with the device_error call.
|
|
This commit is a follow on to:
commit 182421c9d2eea8c4877d983a2124e591f0aca710
Date: Tue Oct 11 15:02:08 2022 +0100
sim/ppc: fixes for arguments to printf style functions
where commit 182421c9d2ee addressed issues with printf format
arguments that were causing the compiler to give an error, this commit
addresses issues that caused the compiler to emit a warning.
This commit is mostly either changing the format string to match the
argument, or in some cases, excess, unused arguments are removed.
|
|
I see an uninitialized variable warning (with gcc 9.3.1) from
cgen-run.c, like this:
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c: In function ‘sim_resume’:
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:259:5: warning: ‘engine_fns$’ may be used uninitialized in this function [-Wmaybe-uninitialized]
259 | (* engine_fns[next_cpu_nr]) (cpu);
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:232:14: note: ‘engine_fns$’ was declared here
232 | ENGINE_FN *engine_fns[MAX_NR_PROCESSORS];
| ^~~~~~~~~~
This is a false positive - we over allocate engine_fn, and then only
initialize the nr_cpus entries which we will later go on to use.
However, we can easily silence this warning by initializing the unused
entries in engine_fns to NULL, this might also help if anyone ever
looks at engine_fns in a debugger, it should now be obvious which
entries are in use, and which are not.
With this change the warning is gone.
There should be no change in behaviour with this commit.
|
|
* testsuite/binutils-all/addr2line.exp: Tidy. For powerpc64
arrange to pass --synthetic to nm, and extract .main and .fn
symbol address for addr2line test. Handle default executable
extension on cygwin/mingw compilers.
|
|
* MAINTAINERS: Add section on patches, copyright and DCO.
|
|
I spotted that the gdb.gdb/unittest.exp script causes a temporary file
inserters_extractors-2.txt to be created in build/gdb/testsuite/
instead of in build/gdb/testsuite/output/gdb.gdb/unittest/.
This is because some of the 'maint selftest' tests create temporary
files in GDB's current directory, specifically, the two source files:
gdb/unittests/basic_string_view/inserters/wchar_t/2.cc
gdb/unittests/basic_string_view/inserters/char/2.cc
both create a temporary file called inserters_extractors-2.txt, though
we only run the second of these as part of GDB's selftests.
I initially proposed just using GDB's 'cd' command in unittest.exp to
switch to the test output directory before running the selftests,
however, Pedro pointed out that there was a risk here that, if GDB
crashed during shutdown, the generated core file would be left in the
test output directory rather than in the testsuite directory. As a
result, our clever core file spotting logic would fail to spot the
core file and alert the user.
Instead, I propose this slightly more involved solution. I've added a
new with_gdb_cwd directory proc, used like this:
with_gdb_cwd $directory {
# Tests here...
}
The new proc temporarily switches to $directory and then runs the
tests within the block. After running the tests the previous current
working directory is restored.
Additionally, after switching back to the previous cwd, we check that
GDB is still responsive. This means that if GDB crashed immediately
prior to restoring the previous directory, and left the core file in
the wrong place, then the responsiveness check will fail, and a FAIL
will be emitted, this should be enough to alert the user that
something has gone wrong.
With this commit in place the unittest.exp script now leaves its
temporary file in the test output directory.
|
|
I spotted that the test gdb.dwarf2/dw2-using-debug-str.exp was
creating an output file called debug_str_section in the root
build/gdb/testsuite directory instead of using the
build/gdb/testsuite/output/gdb.dwarf2/dw2-using-debug-str/ directory.
This appears to be caused by a missing '$' character. We setup a
variable debug_str_section which contains a path within the output
directory, but then when we build the objcopy command we use
'debug_str_section' without a '$' prefix, as a result, we create the
debug_str_section file.
This commit adds the missing '$', the file is now created in the
output directory.
|
|
After commit:
commit c60b3806799abf1d7f6cf5108a1b0e733a950b13
Date: Wed Oct 19 10:57:12 2022 +0200
aarch64-pe support for LD, GAS and BFD
It appears that bfd/Makefile.in and bfd/configure were not regenerated
correctly. The differences in the configure file are only whitespace,
but in Makefile.in a critical reference to pe-aarch64.lo was missing.
|
|
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
|
|
* binutils/testsuite/config/default.exp: Set ADDR2LINE and ADDR2LINEFLAGS.
* binutils/testsuite/binutils-all/addr2line.exp: New file.
|
|
With test-case gdb.python/py-breakpoint.exp I run into:
...
(gdb) ERROR: tcl error sourcing gdb.python/py-breakpoint.exp.
ERROR: can't read "skip_hw_watchpoint_tests_p": no such variable
while executing
"if {$skip_hw_watchpoint_tests_p} {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}"
...
Fix this by adding the missing "global skip_hw_watchpoint_tests_p" in two
procs.
Tested on x86_64-linux.
|
|
Relocs like PC32DBL require a right shift of the symbol value. There
is no situation where dropping symbol value bits with the right shift
is a good thing. Hence we now issue an error to detect such problems.
|
|
In the downstream ROCm GDB port, we would create multiple register
groups with duplicate names. While it did not really hurt, it certainly
wasn't the intent. And I don't think it ever makes sense to do so.
To catch these, change the assert in reggroups::add to check for
duplicate names. It's no longer necessary to check for duplicate
reggroup pointers, because adding the same group twice would be caught
by the duplicate name check.
Change-Id: Id216a58acf91f1b314d3cba2d02de73656f8851d
Approved-By: Tom Tromey <tom@tromey.com>
|
|
|
|
Since AVX-VNNI requires AVX2, disable AVX-VNNI when disabling AVX2.
* i386-gen.c (cpu_flag_init): Add CpuAVX_VNNI to
CPU_ANY_AVX2_FLAGS.
* i386-init.h: Regenerate.
|
|
PR python/16324 points out that comparing a frame id to null_frame_id
can never succeed, and proposes simply removing the dead code. That
is what this patch does.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16324
|
|
The hardware watchpoint check has been updated in a couple of recent
patches. This patch updates the hardware watchpoint test in the remaining
gdb tests.
The issue is the PowerPC processors support hardware watchpoints with the
exception of Power 9. The hardware watchpoint support is disabled on
Power 9. The test skip_hw_watchpoint_tests must be used to correctly
determine if the PowerPC processor supports hardware watchpoints.
This patch fixes 6 test failures in test gdb.threads/watchpoint-fork.exp.
Test gdb.base/watch-vfork.exp runs with can-use-hw-watchpoints set to
true and false. When the test is run with can-use-hw-watchpoints set to
true, gdb just falls back to using software watchpoints. The
patch reduces the number of expected passes by 2 since because it now
only runs once with can-use-hw-watchpoints set to false.
Test gdb.mi/mi-watch.exp runs the test with argument hw and sw. If the
argument is hw and hardware watchpoints are not supported the test exits.
The number of expected passes is cut in half with the patch as it now only
runs the test using software breakpoints. Previously the pass to use
hardware watchpoints was not skipped and the test actually ran using
software watchpoints.
The following tests run the same with and without the patch. The tests
are supposed to execute the gdb command "set can-use-hw-watchpoints 0" if
the processor does not support hardware bwatchpoints. However the command
was not being executed and gdb was falling back to using software
watchpoints since the Power 9 watchpoint resource check fails. With the
patch, the tests now execute the command and the test runs using software
watchpoints as it did previously. The tests are:
gdb.base/commands.exp
gdb.base/cond-eval-mode.exp
gdb.base/display.exp
gdb.base/gdb11531.exp
gdb.base/recurse.exp
gdb.base/value-double-free.exp
gdb.base/watch-bitfields.exp
gdb.base/watch-cond-infcall.exp
gdb.base/watch-cond.exp
gdb.base/watchpoint-solib.exp
gdb.base/watchpoints.exp
The following two tests are not supported on the Power 9 system used to
test the changes. The patch does not change the tests results for these
tests:
gdb.python/py-breakpoint.exp
gdb.mi/mi-watch-nonstop.exp
|
|
With test-case gdb.base/included.exp and host board local-remote-host.exp with
tentative fix for PR29697 I run into:
...
included.c:18:10: fatal error: included.h: No such file or directory
#include "included.h"
^~~~~~~~~~~~
compilation terminated.
...
Fix this by adding the missing gdb_remote_download calls.
Likewise in a few other test-cases.
Tested on x86_64-linux.
|
|
With test-case gdb.server/no-thread-db.exp and host board local-remote-host.exp
with a tentative fix for PR29697 I run into:
...
(gdb) print foo^M
Cannot find thread-local storage for Thread 29613.29613, executable file \
$HOME/no-thread-db:^M
Remote target failed to process qGetTLSAddr request^M
(gdb) FAIL: gdb.server/no-thread-db.exp: print foo
...
The regexp in the test-case expects the full $binfile pathname, but we have
instead $HOME/no-thread-db.
Fix this by making the regexp less strict.
Tested on x86_64-linux.
|
|
With host board local-remote-host.exp and test-case
gdb.base/return-nodebug.exp, I run into:
...
Executing on host: gcc -fno-stack-protector -fdiagnostics-color=never \
-DTYPE=signed\ char -c -g -o return-nodebug-signed-char0.o \
/home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/return-nodebug.c \
(timeout = 300)
builtin_spawn [open ...]^M
gcc: error: char: No such file or directory
...
Avoid the quoting problem by not using spaces in the define.
Tested on x86_64-linux.
|
|
When running test-case gdb.server/file-transfer.exp with host
board local-remote-host.exp, I get:
...
Executing on host: cmp -s $outputs/gdb.server/file-transfer/file-transfer \
down-server (timeout = 300)
builtin_spawn [open ...]^M
XYZ2ZYX
FAIL: gdb.server/file-transfer.exp: compare intermediate binary file
...
The remote host and remote target cases are handled here together here in proc
test_file_transfer:
...
if {![is_remote host] && ![is_remote target]} {
set up_server [standard_output_file $up_server]
set down_server [standard_output_file $down_server]
}
...
Fix this by handling them separately.
Tested on x86_64-linux.
|
|
Update gdb/testsuite/boards/README to reflect recent commit c4c8c27263d
("[gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts"), which
means the board now uses a pseudo-tty, but with editing disabled.
|
|
When looking up names, GDB needs to stay within one linker namespace to
find the correct instance in case the same name is provided in more than
one namespace.
Modify svr4_iterate_over_objfiles_in_search_order() to stay within the
namespace of the current_objfile argument. If no current_objfile is
provided (i.e. it is nullptr), iterate over objfiles in the initial
namespace.
For objfiles that do not have a corresponding so_list to provide the
namespace, assume that the objfile was loaded into the initial namespace.
This would cover the main executable objfile (which is indeed loaded into
the initial namespace) as well as manually added symbol files.
Expected fails:
- gdb.base/non-lazy-array-index.exp: the expression parser may lookup
global symbols, which may result in xfers to read auxv for determining
the debug base as part of svr4_iterate_over_objfiles_in_search_order().
- gdb.server/non-lazy-array-index.exp: symbol lookup may access the
target to read AUXV in order to determine the debug base for SVR4
linker namespaces.
Known issues:
- get_symbol_address() and get_msymbol_address() search objfiles for a
'better' match. This was introduced by
4b610737f02 Handle copy relocations
to handle copy relocations but it now causes a wrong address to be
read after symbol lookup actually cound the correct symbol. This can
be seen, for example, with gdb.base/dlmopen.exp when compiled with
clang.
- gnu ifuncs are only looked up in the initial namespace.
- lookup_minimal_symbol() and lookup_minimal_symbol_text() directly
iterate over objfiles and are not aware of linker namespaces.
|
