aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-08Make exception throwing a bit more efficientTom Tromey3-18/+37
This makes exception throwing a bit more efficient, by removing some copies. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.c (throw_exception): Rename from throw_exception_cxx. Remove old copy. Make argument const. (throw_it): Create and throw exception objects directly. * common/common-exceptions.h (throw_exception): Make argument const. (struct gdb_exception_error): Add constructor. (struct gdb_exception_quit): Add constructor.
2019-04-08Remove some now-dead exception codeTom Tromey3-57/+13
After the rewriting to use try/catch, some of the exception code is now unused. This patch removes that code. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (exception_rethrow): Don't declare. (TRY_SJLJ): Update comment. (TRY, CATCH, END_CATCH): Remove. * common/common-exceptions.c (exception_rethrow): Remove.
2019-04-08Rename gdb exception typesTom Tromey146-459/+606
This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-08Rewrite TRY/CATCHTom Tromey144-1326/+1033
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-08Make exceptions use std::string and be self-managingTom Tromey43-245/+253
This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.
2019-04-08Simplify exception handlingTom Tromey3-81/+10
Now that cleanups have been removed, TRY/CATCH can't be SJLJ-based any more. This patch simplifies the exception handling code, by removing the non-working variants. Note that the "pure" C++ exception handling code is removed as well; I think the route forward must be to change exceptions to be self-destructing, so that try_scope_depth can simply be removed. Some longjmp-based code remains, as it is needed to throw an exception through readline. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (GDB_XCPT_SJMP, GDB_XCPT_TRY) (GDB_XCPT_RAW_TRY, GDB_XCPT): Remove. (TRY, CATCH, END_CATCH): Remove some definitions. * common/common-exceptions.c: Don't use GDB_XCPT. (catcher_list_size): Remove. (throw_exception, throw_it): Simplify.
2019-04-08Fix i386-lynxos and other runtime linker failsAlan Modra4-0/+9
Segfaults due to htab->params being NULL. * emulparams/elf64rdos.sh (EXTRA_EM_FILE): Define. * emulparams/i386lynx.sh (EXTRA_EM_FILE): Define. * emulparams/i386nto.sh (EXTRA_EM_FILE): Define.
2019-04-08Fix x86_64-rdos build failAlan Modra3-26/+33
x86_64-rdos is one of the few x86_64 targets that is 64-bit only and the x86_64 configure entries don't depend on elf-vxworks.lo. This results in undefined references from elfxx-x86.o. * configure.ac (elfxx_x86): Define and use. * configure: Regenerate.
2019-04-08Automatic date update in version.inGDB Administrator1-1/+1
2019-04-07Make "all" depend on "info"Tom Tromey2-1/+5
I've broken "make info" a couple of times now, because I sometimes forget to run "make info" after modifying a Texinfo file. I don't know why gdb's "make all" doesn't build the info pages. I suspect this was some Cygnus-local oddity back in the day. This patch changes doc/Makefile.in so that the info pages are built by "make all". As a point of reference, Automake has essentially always worked this way. According to the Automake manual (I didn't double-check) this is required by the GNU coding standards. The first time I sent this patch, I mentioned that I wanted to look into some existing bugs in bugzilla about missing "makeinfo". However, today I tried and I discovered that BFD requires makeinfo, and builds its info file as part of "all". So, I think this change doesn't worsen the situation for users in any way, and can simply go in. gdb/doc/ChangeLog 2019-04-07 Tom Tromey <tom@tromey.com> * Makefile.in (all): Depend on "info".
2019-04-07print_insn_powerpc tidyAlan Modra2-26/+29
* ppc-dis.c (print_insn_powerpc): Use a tiny state machine op_separator to control printing of spaces, comma and parens rather than need_comma, need_paren and spaces vars.
2019-04-07PR24421, Wrong brackets in opcodes/arm-dis.cAlan Modra2-213/+219
PR 24421 * arm-dis.c (print_insn_coprocessor): Correct bracket placement. (print_insn_neon, print_insn_arm): Likewise.
2019-04-07Merge libiberty from gccAlan Modra10-42/+97
2019-04-07Automatic date update in version.inGDB Administrator1-1/+1
2019-04-06Revert the header-sorting patchTom Tromey162-1593/+1426
Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-06x86: Move x86-specific linker options to elf_linker_x86_paramsH.J. Lu29-58/+256
Remove x86-specific linker options from bfd_link_info and put them in elf_linker_x86_params. Add _bfd_elf_linker_x86_set_options to pass x86-specific linker options from ld to bfd. bfd/ * elf-linker-x86.h: New file. * elf32-i386.c (elf_i386_convert_load_reloc): Use htab->params to get x86-specific linker options. * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise. (elf_x86_64_check_relocs): Likewise. (elf_x86_64_relocate_section): Likewise. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Likewise. (_bfd_x86_elf_link_setup_gnu_properties): Likewise. (_bfd_elf_linker_x86_set_options): New function. * elfxx-x86.h: Include "elf-linker-x86.h". (elf_x86_link_hash_table): Add params. include/ * bfdlink.h (bfd_link_info): Remove x86-specific linker options. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emultempl/elf-x86.em. (eelf_i386_sol2.c): Also depend on $(srcdir)/emultempl/solaris2-x86.em. (eelf_x86_64_sol2.c): Likewise. * Makefile.in: Regenerated. * emulparams/call_nop.sh: Set x86-specific linker options via params. * emulparams/cet.sh: Likewise. * emulparams/reloc_overflow.sh: Likewise. * emulparams/elf32_x86_64.sh (EXTRA_EM_FILE): New. Set to "elf-x86". * emulparams/elf_i386.sh: Likewise. * emulparams/elf_i386_be.sh: Likewise. * emulparams/elf_i386_chaos.sh: Likewise. * emulparams/elf_i386_ldso.sh: Likewise. * emulparams/elf_i386_vxworks.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/elf_i386_sol2.sh (EXTRA_EM_FILE): Changed to "solaris2-x86". * emulparams/elf_x86_64_sol2.sh: Likewise. * emultempl/elf-x86.em: New file. * emultempl/solaris2-x86.em: Likewise. * emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Don't set link_info.call_nop_byte.
2019-04-05Sort includes for files gdb/[a-f]*.[chyl].Tom Tromey162-1261/+1757
This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers.
2019-04-06Automatic date update in version.inGDB Administrator1-1/+1
2019-04-05x86: Add assembler -mx86-used-note=yes testH.J. Lu5-0/+59
Check assembler -mx86-used-note=yes option and readelf -n output. * testsuite/gas/i386/i386.exp: Run -mx86-used-note=yes tests. * testsuite/gas/i386/property-2.d: New file. * testsuite/gas/i386/property-2.s: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-04-05x86: Support Intel AVX512 BF16Xuepeng Guo24-4134/+5075
Add assembler and disassembler support Intel AVX512 BF16: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference gas/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_bf16. (cpu_noarch): Add noavx512_bf16. * doc/c-i386.texi: Document avx512_bf16. * testsuite/gas/i386/avx512_bf16.d: New file. * testsuite/gas/i386/avx512_bf16.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/i386.exp: Add BF16 related tests. opcodes/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * i386-dis-evex.h (evex_table): Updated to support BF16 instructions. * i386-dis.c (enum): Add EVEX_W_0F3852_P_1, EVEX_W_0F3872_P_1 and EVEX_W_0F3872_P_3. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BF16_FLAGS. (cpu_flags): Add bitfield for CpuAVX512_BF16. * i386-opc.h (enum): Add CpuAVX512_BF16. (i386_cpu_flags): Add bitfield for cpuavx512_bf16. * i386-opc.tbl: Add AVX512 BF16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-04-05Use linux_get_auxv to get AT_PHDR in the PPC stubPedro Franco de Carvalho4-12/+41
This patch fixes a build error due to a call to ppc_get_auxv that was left over after linux_get_hwcap and linux_get_hwcap2 were introduced in: 974c89e0882ddb03e294eca76a9e3d3bef90eacf gdbserver: Add linux_get_hwcap Because the missing call fetched AT_PHDR and not AT_HWCAP, linux_get_auxv is now visible. This use also required ppc_get_auxv to return a status variable indicating that the AT_PHDR entry was not found separately from the actual value of of the auxv entry. Therefore, the new linux_get_auxv function is changed to return a status variable and write the entry value to a pointer passed as an argument. Note that linux_get_hwcap and linux_get_hwcap2 still use the return value as both an indicator of that the entry wasn't found and as the actual value of the entry. gdb/gdbserver/ChangeLog: 2019-04-05 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * linux-low.c (linux_get_auxv): Remove static. Return auxv entry value in argument pointer, return 1 if the entry is found and 0 otherwise. Move comment. (linux_get_hwcap, linux_get_hwcap2): Use modified linux_get_auxv. * linux-low.h (linux_get_auxv): Declare. * linux-ppc-low.c (is_elfv2_inferior): Use linux_get_auxv.
2019-04-05Use upper-case for metasyntactic in gdbserver helpTom Tromey2-2/+7
I noticed that "gdbserver --help" contains a few metasyntactic variables that aren't in upper-case. This patch fixes them to conform to the GNU standard. gdb/gdbserver/ChangeLog 2019-04-05 Tom Tromey <tromey@adacore.com> * server.c (gdbserver_usage): Use upper-case for metasyntactic variables.
2019-04-04Move innermost_block_tracker global to parse_stateTom Tromey17-97/+145
This changes the parsing API so that callers that are interested in tracking the innermost block must instantiate an innermost_block_tracker and pass it in. Then, a pointer to this object is stored in the parser_state. 2019-04-04 Tom Tromey <tom@tromey.com> * varobj.c (varobj_create): Update. * rust-exp.y (struct rust_parser) <update_innermost_block, lookup_symbol>: New methods. (rust_parser::update_innermost_block, rust_parser::lookup_symbol): Rename. (rust_parser::rust_lookup_type) (rust_parser::convert_ast_to_expression, rust_lex_tests): Update. * printcmd.c (display_command, do_one_display): Update. * parser-defs.h (struct parser_state) <parser_state>: Add "tracker" parameter. (block_tracker): New member. (class innermost_block_tracker) <innermost_block_tracker>: Add "types" parameter. <reset>: Remove method. (innermost_block): Don't declare. (null_post_parser): Update. * parse.c (innermost_block): Remove global. (write_dollar_variable): Update. (parse_exp_1, parse_exp_in_context): Add "tracker" parameter. Remove "tracker_types" parameter. (parse_expression): Add "tracker" parameter. (parse_expression_for_completion): Update. (null_post_parser): Add "tracker" parameter. * p-exp.y: Update rules. * m2-exp.y: Update rules. * language.h (struct language_defn) <la_post_parser>: Add "tracker" parameter. * go-exp.y: Update rules. * f-exp.y: Update rules. * expression.h (parse_expression, parse_exp_1): Add "tracker" parameter. * d-exp.y: Update rules. * c-exp.y: Update rules. * breakpoint.c (set_breakpoint_condition): Create an innermost_block_tracker. (watch_command_1): Likewise. * ada-lang.c (resolve): Add "tracker" parameter. (resolve_subexp): Likewise. * ada-exp.y (write_var_from_sym): Update.
2019-04-04Move type stack handling to a new classTom Tromey9-444/+521
This introduces a new "type_stack" class, and moves all the parser type stack handling to this class. Parsers that wish to use this facility must now instantiate this class somehow. I chose this approach because a minority of the existing parsers require this. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * type-stack.h: New file. * type-stack.c: New file. * parser-defs.h (enum type_pieces, union type_stack_elt): Move to type-stack.h. (insert_into_type_stack, insert_type, push_type, push_type_int) (insert_type_address_space, pop_type, pop_type_int) (pop_typelist, pop_type_stack, append_type_stack) (push_type_stack, get_type_stack, push_typelist) (follow_type_instance_flags, follow_types): Don't declare. * parse.c (type_stack): Remove global. (parse_exp_in_context): Update. (insert_into_type_stack, insert_type, push_type, push_type_int) (insert_type_address_space, pop_type, pop_type_int) (pop_typelist, pop_type_stack, append_type_stack) (push_type_stack, get_type_stack, push_typelist) (follow_type_instance_flags, follow_types): Remove (moved to type-stack.c). * f-exp.y (type_stack): New global. Update rules. (push_kind_type, f_parse): Update. * d-exp.y (type_stack): New global. Update rules. (d_parse): Update. * c-exp.y (struct c_parse_state) <type_stack>: New member. Update rules. * Makefile.in (COMMON_SFILES): Add type-stack.c. (HFILES_NO_SRCDIR): Add type-stack.h.
2019-04-04Move completion parsing to parser_stateTom Tromey11-123/+188
This moves the globals and functions related to parsing for completion to parser_state. A new structure is introduced in order to return completion results from the parse back to parse_expression_for_completion. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y (rust_parser::lex_identifier, rustyylex) (rust_parser::convert_ast_to_expression, rust_parse) (rust_lex_test_completion, rust_lex_tests): Update. * parser-defs.h (struct expr_completion_state): New. (struct parser_state) <parser_state>: Add completion parameter. <mark_struct_expression, mark_completion_tag>: New methods. <parse_completion, m_completion_state>: New members. (prefixify_expression, null_post_parser): Update. (mark_struct_expression, mark_completion_tag): Don't declare. * parse.c (parse_completion, expout_last_struct) (expout_tag_completion_type, expout_completion_name): Remove globals. (parser_state::mark_struct_expression) (parser_state::mark_completion_tag): Now methods. (prefixify_expression): Add last_struct parameter. (prefixify_subexp): Likewise. (parse_exp_1): Update. (parse_exp_in_context): Add cstate parameter. Update. (parse_expression_for_completion): Create an expr_completion_state. (null_post_parser): Add "completion" parameter. * p-exp.y: Update rules. (yylex): Update. * language.h (struct language_defn) <la_post_parser>: Add "completing" parameter. * go-exp.y: Update rules. (lex_one_token): Update. * expression.h (parse_completion): Don't declare. * d-exp.y: Update rules. (lex_one_token): Update rules. * c-exp.y: Update rules. (lex_one_token): Update. * ada-lang.c (resolve): Add "parse_completion" parameter. (resolve_subexp): Likewise. (ada_resolve_function): Likewise.
2019-04-04Move arglist_len et al to parser_stateTom Tromey9-80/+89
This moves arglist_len, start_arglist, and end_arglist to parser_state. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * parser-defs.h (struct parser_state) <start_arglist, end_arglist>: New methods. <arglist_len, m_funcall_chain>: New members. (arglist_len, start_arglist, end_arglist): Don't declare. * parse.c (arglist_len, funcall_chain): Remove global. (start_arglist, end_arglist): Remove functions. (parse_exp_in_context): Update. * p-exp.y: Update rules. * m2-exp.y: Update rules. * go-exp.y: Update rules. * f-exp.y: Update rules. * d-exp.y: Update rules. * c-exp.y: Update rules.
2019-04-04Move lexptr and prev_lexptr to parser_stateTom Tromey12-275/+312
This removes the lexptr and prev_lexptr globals, in favor of members of parser_state. prev_lexptr could be isolated to each parser, but since every parser uses it, that did not seem necessary. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y (struct rust_parser) <lex_hex, lex_escape, lex_operator, push_back>: New methods. Update all rules. (rust_parser::lex_hex, lex_escape): Rename and update. (rust_parser::lex_string, rust_parser::lex_identifier): Update. (rust_parser::lex_operator): Rename and update. (rust_parser::lex_number, rustyylex, rustyyerror) (rust_lex_test_init, rust_lex_test_sequence) (rust_lex_test_push_back, rust_lex_tests): Update. * parser-defs.h (struct parser_state) <parser_state>: Add "input" parameter. <lexptr, prev_lexptr>: New members. (lexptr, prev_lexptr): Don't declare. * parse.c (lexptr, prev_lexptr): Remove globals. (parse_exp_in_context): Update. * p-exp.y (yylex, yyerror): Update. * m2-exp.y (parse_number, yylex, yyerror): Update. * go-exp.y (lex_one_token, yyerror): Update. * f-exp.y (match_string_literal, yylex, yyerror): Update. * d-exp.y (lex_one_token, yyerror): Update. * c-exp.y (scan_macro_expansion, finished_macro_expansion) (lex_one_token, yyerror): Update. * ada-lex.l (YY_INPUT): Update. (rewind_to_char): Update. * ada-exp.y (yyerror): Update.
2019-04-04Move comma_terminates global to parser_stateTom Tromey11-19/+36
This moves the comma_terminates global to parser_state. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y (rustyylex, rust_lex_tests): Update. * parser-defs.h (struct parser_state) <parser_state>: Add new parameter. <comma_terminates>: New member. (comma_terminates): Don't declare global. * parse.c (comma_terminates): Remove global. (parse_exp_in_context): Update. * p-exp.y (yylex): Update. * m2-exp.y (yylex): Update. * go-exp.y (lex_one_token): Update. * f-exp.y (yylex): Update. * d-exp.y (lex_one_token): Update. * c-exp.y (lex_one_token): Update. * ada-lex.l: Update.
2019-04-04Remove paren_depth globalTom Tromey11-14/+62
This removes the "paren_depth" global. In most cases, it is made into a static global in a given parser. I consider this a slight improvement, because it makes it clear that the variable isn't used for communication between different modules of gdb. The one exception is the Rust parser, which already incorporates all local state into a transient object; in this case the parser depth is now a member. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y (struct rust_parser) <paren_depth>: New member. (rustyylex, rust_lex_test_init, rust_lex_test_one) (rust_lex_test_sequence, rust_lex_test_push_back): Update. * parser-defs.h (paren_depth): Don't declare. * parse.c (paren_depth): Remove global. (parse_exp_in_context): Update. * p-exp.y (paren_depth): New global. (pascal_parse): Initialize it. * m2-exp.y (paren_depth): New global. (m2_parse): Initialize it. * go-exp.y (paren_depth): New global. (go_parse): Initialize it. * f-exp.y (paren_depth): New global. (f_parse): Initialize it. * d-exp.y (paren_depth): New global. (d_parse): Initialize it. * c-exp.y (paren_depth): New global. (c_parse): Initialize it. * ada-lex.l (paren_depth): New global. (lexer_init): Initialize it.
2019-04-04Move expression_context_* globals to parser_stateTom Tromey11-81/+136
This moves the expression_context_block and expression_context_pc globals to be members of parser_state and updates the parsers. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y (rust_parser::crate_name, rust_parser::super_name) (rust_parser::convert_ast_to_type) (rust_parser::convert_ast_to_expression, rust_lex_tests): Update. * parser-defs.h (struct parser_state) <parser_state>: Add parameters. Initialize new members. <expression_context_block, expression_context_pc>: New members. * parse.c (expression_context_block, expression_context_pc): Remove globals. (parse_exp_in_context): Update. * p-exp.y: Update all rules. (yylex): Update. * m2-exp.y: Update all rules. (yylex): Update. * go-exp.y (yylex): Update. * f-exp.y (yylex): Update. * d-exp.y: Update all rules. (yylex): Update. * c-exp.y: Update all rules. (lex_one_token, classify_name, yylex, c_parse): Update. * ada-exp.y (write_var_or_type, write_name_assoc): Update.
2019-04-04Make base class for parser_stateTom Tromey9-73/+115
This makes a new base class, expr_builder, for parser_state. This separates the state needed to construct an expression from the state needed by the parsers. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * gdbarch.h, gdbarch.c: Rebuild. * gdbarch.sh (dtrace_parse_probe_argument): Change type. * stap-probe.h: (struct stap_parse_info): Replace "parser_state" with "expr_builder". * parser-defs.h (struct expr_builder): Rename from "parser_state". (parser_state): New class. * parse.c (expr_builder): Rename. (expr_builder::release): Rename. (write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym) (write_exp_elt_msym, write_exp_elt_block, write_exp_elt_objfile) (write_exp_elt_longcst, write_exp_elt_floatcst) (write_exp_elt_type, write_exp_elt_intern, write_exp_string) (write_exp_string_vector, write_exp_bitstring) (write_exp_msymbol, mark_struct_expression) (write_dollar_variable) (insert_type_address_space, increase_expout_size): Replace "parser_state" with "expr_builder". * dtrace-probe.c: Replace "parser_state" with "expr_builder". * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Replace "parser_state" with "expr_builder".
2019-04-04Turn parse_language into a methodTom Tromey10-62/+85
This changes parse_language into a method of parser_state. This patch was written by a script. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y: Replace "parse_language" with method call. * p-exp.y: (yylex): Replace "parse_language" with method call. * m2-exp.y: (yylex): Replace "parse_language" with method call. * go-exp.y (classify_name): Replace "parse_language" with method call. * f-exp.y (yylex): Replace "parse_language" with method call. * d-exp.y (lex_one_token): Replace "parse_language" with method call. * c-exp.y: (lex_one_token, classify_name, yylex): Replace "parse_language" with method call. * ada-exp.y (find_primitive_type, type_char) (type_system_address): Replace "parse_language" with method call.
2019-04-04Turn parse_gdbarch into a methodTom Tromey13-95/+124
This changes parse_gdbarch into a method of parser_state. This patch was written by a script. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * rust-exp.y: Replace "parse_gdbarch" with method call. * parse.c (write_dollar_variable, insert_type_address_space): Replace "parse_gdbarch" with method call. * p-exp.y (parse_type, yylex): Replace "parse_gdbarch" with method call. * objc-lang.c (end_msglist): Replace "parse_gdbarch" with method call. * m2-exp.y (parse_type, parse_m2_type, yylex): Replace "parse_gdbarch" with method call. * go-exp.y (parse_type, classify_name): Replace "parse_gdbarch" with method call. * f-exp.y (parse_type, parse_f_type, yylex): Replace "parse_gdbarch" with method call. * d-exp.y (parse_type, parse_d_type, lex_one_token): Replace "parse_gdbarch" with method call. * c-exp.y (parse_type, parse_number, classify_name): Replace "parse_gdbarch" with method call. * ada-lex.l: Replace "parse_gdbarch" with method call. * ada-exp.y (parse_type, find_primitive_type, type_char) (type_system_address): Replace "parse_gdbarch" with method call.
2019-04-04Remove parser_state "initial_size" parameterTom Tromey7-13/+23
All the real (not test) uses of parser_state pass 10 as the "initial_size" parameter, and it seems to me that there's no real reason to require callers to set this. This patch removes this parameter. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * dtrace-probe.c (dtrace_probe::build_arg_exprs): Update. * stap-probe.c (stap_parse_argument): Update. * stap-probe.h (struct stap_parse_info) <stap_parse_info>: Remove initial_size parameter. * rust-exp.y (rust_lex_tests): Update. * parse.c (parser_state): Update. (parse_exp_in_context): Update. * parser-defs.h (struct parser_state) <parser_state>: Remove "initial_size" parameter.
2019-04-04Make increase_expout_size staticTom Tromey3-8/+12
increase_expout_size is only called from parse.c, and probably only should be. This makes it "static". Tested by rebuilding. gdb/ChangeLog 2019-04-04 Tom Tromey <tom@tromey.com> * parser-defs.h (increase_expout_size): Don't declare. * parse.c (increase_expout_size): Now static.
2019-04-05PowerPC conditional branch testAlan Modra9-0/+421
Adds a new test checking conditional branch BO values. * testsuite/gas/ppc/bc.s, * testsuite/gas/ppc/bcat.d, * testsuite/gas/ppc/bcaterr.d, * testsuite/gas/ppc/bcaterr.l, * testsuite/gas/ppc/bcy.d, * testsuite/gas/ppc/bcyerr.d, * testsuite/gas/ppc/bcyerr.l: New tests. * testsuite/gas/ppc/ppc.exp: Run them.
2019-04-05PowerPC bc extended branch mnemonics and "y" hintsAlan Modra2-141/+148
This patch fixes a problem with disassembly of branch instructions for processors complying with PowerPC ISA versions prior to version 2.0, ie. those that use "y" bit branch taken hints. Many of the extended bcctr and bclr mnemonics that should have disassembled with a "-" suffix, ie. not taken, did not display the "-" due to the ordering in powerpc_opcodes. I believe it's been that way from the original 85dcf36d72b commit of ppc-opc.c. I've also added a BH field (optional) to a few opcodes. This gives better disassembly in raw mode, showing the branch taken hint in the mnemonic as is done for bc. It would be reasonable to add a BH field to all bcctr, bclr, and bctar extended mnemonics but that runs into a small difficulty: Currently we print all or none of the optional operands. That means for example that "bgectr cr2" would display as "bgectr cr2,0" if a BH field is added to bgectr. * ppc-opc.c (XLBH_MASK): Subtract off BH field from BB_MASK. (powerpc_opcodes): Reorder bcctr and bclr extended mnemonics to favour printing of "-" branch hint when using the "y" bit. Allow BH field on bc{ctr,lr,tar}{,l}{-,+}.
2019-04-05PowerPC disassembler: Don't emit trailing spacesAlan Modra19-63/+96
When an instruction has operands, the PowerPC disassembler prints spaces after the opcode so as to line up operands. If the operands are all optional and all default value, then no operands are printed, leaving trailing spaces. This patch fixes that. opcodes/ * ppc-dis.c (print_insn_powerpc): Delay printing spaces after opcode until first operand is output. gas/ * testsuite/gas/ppc/476.d: Remove trailing spaces. * testsuite/gas/ppc/a2.d: Likewise. * testsuite/gas/ppc/booke.d: Likewise. * testsuite/gas/ppc/booke_xcoff.d: Likewise. * testsuite/gas/ppc/e500.d: Likewise. * testsuite/gas/ppc/e500mc.d: Likewise. * testsuite/gas/ppc/e6500.d: Likewise. * testsuite/gas/ppc/htm.d: Likewise. * testsuite/gas/ppc/power6.d: Likewise. * testsuite/gas/ppc/power8.d: Likewise. * testsuite/gas/ppc/power9.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces. * testsuite/ld-powerpc/tlsopt5.d: Likewise. * testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
2019-04-05Automatic date update in version.inGDB Administrator1-1/+1
2019-04-04Add extended mnemonics for bctar. Fix setting of 'at' branch hints.Peter Bergner7-73/+584
opcodes/ PR gas/24349 * ppc-opc.c (valid_bo_pre_v2): Add comments. (valid_bo_post_v2): Add support for 'at' branch hints. (insert_bo): Only error on branch on ctr. (get_bo_hint_mask): New function. (insert_boe): Add new 'branch_taken' formal argument. Add support for inserting 'at' branch hints. (extract_boe): Add new 'branch_taken' formal argument. Add support for extracting 'at' branch hints. (insert_bom, extract_bom, insert_bop, extract_bop): New functions. (BOE): Delete operand. (BOM, BOP): New operands. (RM): Update value. (XLYLK, XLYLK_MASK, XLYBB_MASK): Delete. (powerpc_opcodes) <bc-, bcl-, bca-, bcla-, bclr-, bclrl-, bcctr-, bcctrl-, bctar-, bctarl->: Replace BOE with BOM. (powerpc_opcodes) <bc+, bcl+, bca+, bcla+, bclr+, bclrl+, bcctr+, bcctrl+, bctar+, bctarl+>: Replace BOE with BOP. <bdnztar, bdnztarl, bdztar, bdztarl, btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-, bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl, bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar, bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-, bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-, bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+, bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+, bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar, beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, bttarl+>: New extended mnemonics. gas/ PR gas/24349 * testsuite/gas/ppc/power8.s: (bdnztar, bdnztarl, bdztar, bdztarl, btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-, bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl, bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar, bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-, bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-, bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+, bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+, bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar, beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, bttarl+): Add tests of extended mnemonics. * testsuite/gas/ppc/power8.d: Likewise. Update previous bctar tests to expect new extended mnemonics. * testsuite/gas/ppc/a2.s: <bc, bc-, bc+, bcl, bcl-, bcl+>: Update test to not use illegal BO value. Use a more convenient BI value. * testsuite/gas/ppc/a2.d: Update tests for new expect output.
2019-04-04[GDB, Hurd] Fix build; 'target_waitstatus_to_string' callThomas Schwinge2-1/+6
Recent commit c29705b71a8ec966478c0dc4712194a95291c6de removed an incomplete local implementation in favor of 'target_waitstatus_to_string' (thanks!), but introduced a small typing error: In file included from [...]/gdb/gnu-nat.c:24:0: [...]/gdb/gnu-nat.c: In member function 'virtual ptid_t gnu_nat_target::wait(ptid_t, target_waitstatus*, int)': [...]/gdb/gnu-nat.c:1652:43: error: cannot convert 'target_waitstatus**' to 'const target_waitstatus*' for argument '1' to 'std::__cxx11::string target_waitstatus_to_string(const target_waitstatus*)' target_waitstatus_to_string (&status).c_str ()); ^ [...]/gdb/gnu-nat.h:119:32: note: in definition of macro 'debug' __FILE__ , __LINE__ , ##args); } while (0) ^~~~ [...]/gdb/gnu-nat.c:1650:3: note: in expansion of macro 'inf_debug' inf_debug (inf, "returning ptid = %s, %s", ^~~~~~~~~ gdb/ * gnu-nat.c (gnu_nat_target::wait): Fix target_waitstatus_to_string call.
2019-04-04Automatic date update in version.inGDB Administrator1-1/+1
2019-04-03gas: use literals/const16 for xtensa loop relaxationMax Filippov3-142/+65
Loop opcode relaxation that uses addi/addmi doesn't work well with other relaxations that may cause code movement. Instead of encoding fixed loop end offset in the relaxed sequence use l32r or a pair of const16 to load loop end address. This way the address of the loop end gets a relocation record and it gets updated appropriately. gas/ 2019-04-03 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (convert_frag_immed): Drop convert_frag_immed_finish_loop invocation. (convert_frag_immed_finish_loop): Drop declaration and definition. * config/xtensa-relax.c (widen_spec_list): Replace loop widening that uses addi/addmi with widening that uses l32r and const16.
2019-04-03PR24411, Division is not accepted in MEMORY length expressionAlan Modra2-1/+11
Let's hope no one has section names starting with '/' in scripts. If they do, this change to fix parsing of '/' in expressiongs will break their project. PR 24411 ldlex.l (SYMBOLNAMECHAR1): Don't match '/'. (<EXPRESSION>"/DISCARD/"): New.
2019-04-03ldlex.l tidyAlan Modra2-20/+22
Underscore was specified twice in all these patterns, and backslash twice in some. Flex warned about the $SYSROOT rule, which is covered by earlier rules: "ldlex.l:386: warning, rule cannot be matched". * ldlex.l: Formatting. (CMDFILENAMECHAR, CMDFILENAMECHAR1): Delete. (FILENAMECHAR1, SYMBOLNAMECHAR1, FILENAMECHAR, WILDCHAR), (NOCFILENAMECHAR): Remove duplicate chars. Reorder. (SYMBOLCHARN): Likewise. Rename to SYMBOLNAMECHAR. (<INPUTLIST>"$SYSROOT"..): Delete rule.
2019-04-03BFD whitespace fixesAlan Modra24-188/+197
* coff-i386.c, * coff-x86_64.c, * coffgen.c, * dwarf2.c, * elf-m10200.c, * elf.c, * elf32-arm.c, * elf32-bfin.c, * elf32-csky.c, * elf32-m32r.c, * elf32-microblaze.c, * elf32-pru.c, * elf32-rx.c, * elf32-xgate.c, * elf64-sparc.c, * elfnn-ia64.c, * elfxx-riscv.c, * elfxx-sparc.c, * linker.c, * mach-o.c, * pe-x86_64.c, * pei-x86_64.c, * plugin.c: Whitespace fixes.
2019-04-03Automatic date update in version.inGDB Administrator1-1/+1
2019-04-02RISC-V: Don't check ABI flags if no code section.Jim Wilson2-2/+39
This fixes a glib build failure reported in PR 24389. Using ld -b binary creates an object file with no elf header flags set which has the wrong ABI info for riscv64-linux. But the file also has no code sections, so I added code borrowed from the arm port that only checks the ELF header ABI flags if there is a code section. bfd/ PR 24389 * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Move read of ELF header flags to after check for ELF object file. Loop through sections looking for code sections, if none, then skip ABI checks.
2019-04-02Automatic date update in version.inGDB Administrator1-1/+1
2019-04-01gdb/fortran: Handle internal function callsAndrew Burgess5-5/+34
If an convenience function is defined in python (or guile), then currently this will not work in Fortran, instead the user is given this message: (gdb) set language fortran (gdb) p $myfunc (3) Cannot perform substring on this type Compare this to C: (gdb) set language c (gdb) p $myfunc (3) $1 = 1 After this patch we see the same behaviour in both C and Fortran. I've extended the test to check that all languages can call the convenience functions - only Fortran was broken. When calling convenience functions in Fortran we don't need to perform the same value preparation (passing by pointer) that we would for calling a native function - passing the real value is fine. gdb/ChangeLog: * eval.c (evaluate_subexp_standard): Handle internal functions during Fortran function call handling. gdb/testsuite/ChangeLog: * gdb.python/py-function.exp: Check calling helper function from all languages. * lib/gdb.exp (gdb_supported_languages): New proc.
generated by cgit v1.1 at 2025-02-28 08:38:38 +0000