aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-09Add two callback data castsSimon Marchi3-2/+9
gdb/ChangeLog: * fbsd-tdep.c (fbsd_collect_regset_section_cb): Add cast. * linux-tdep.c (linux_collect_regset_section_cb_data): Likewise.
2015-10-09Fix typos in commentsEli Zaretskii3-2/+7
gdb/ 2015-10-09 Eli Zaretskii <eliz@gnu.org> * stack.c (print_stack_frame): * utils.c (printchar): Fix typos in commentary.
2015-10-09btrace, test: avoid gdb.btrace/vdso.exp failMarkus Metzger3-4/+14
The vdso.exp test checks that we can access the VDSO memory when replaying. Depending on the line information generated by the compiler, runto_main may run to the line marked with bp.1 or stop before that line. The test incorrectly assumes that it will always run to the marked line and fails if it doesn't. The test does not really care about what is traced. It does care that GDB is replaying when capturing the second disassemble output. Reflect that in the test by ignoring the output of the stepping and record goto begin commands and by checking that GDB is actually replaying. testsuite/ * gdb.btrace/vdso.c (main): Remove breakpoint markers. * gdb.btrace/vdso.exp: Change stepping command to "next" and ignore its output. Ignore the output of "record goto begin" and instead check that GDB is replaying.
2015-10-09Fix gdb.base/a2-run.exp racePedro Alves2-19/+40
This patch fixes this racy failure, with the native-extended-gdbserver board: (gdb) run Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run Remote debugging from host 127.0.0.1 Process build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run created; pid = 23832 Reading /lib64/ld-linux-x86-64.so.2 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading /lib64/libm.so.6 from remote target... Reading /lib64/libc.so.6 from remote target... [Inferior 1 (process 23832) exited with code 01] (gdb) FAIL: gdb.base/a2-run.exp: run "a2-run" with no args PASS: gdb.base/a2-run.exp: no spurious messages at program exit run 5 Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run 5 Reading /lib64/ld-linux-x86-64.so.2 from remote target... usage: factorial <number> Child exited with status 1 Note that the output is correct; it's just that inferior output appeared after gdb's output, and the test doesn't handle that correctly. This comment isn't really correct, unfortunately: # waiting. If we had already seen the status wrapper exit, # gdb_test_multiple/expect has no spawn ids left, and thus # returns. That's true of expect in general, but I had missed / forgot that gdb_test_multiple internally has extra matches using "-i $gdb_spawn_id", so even if the caller clears all the indirect spawn id lists, gdb_test_multiple will continue waiting. So do a conditional exp_continue manually instead. gdb/testsuite/ChangeLog: 2015-10-09 Pedro Alves <palves@redhat.com> * gdb.base/a2-run.exp (maybe_exp_continue): New procedure. (top level): Use it in the run with no args test.
2015-10-09Automatic date update in version.inGDB Administrator1-1/+1
2015-10-08[D] Support D style sizeof and typeof expressions.Iain Buclaw4-0/+109
gdb/ChangeLog: * d-exp.y: (UnaryExpression): Support `type.sizeof' expressions. (PostfixExpression): Support `expr.sizeof' expressions. (PrimaryExpression): Support `typeof(expr)' expressions. gdb/testsuite/ChangeLog: * gdb.dlang/properties.exp: New file.
2015-10-08MAINTAINERS: Update my email addressMaciej W. Rozycki2-1/+5
gdb/ * MAINTAINERS: Update my email address.
2015-10-08Fix compile time warning compiling ARC port.Nick Clifton2-1/+6
2015-10-08btrace: fix void returnMarkus Metzger2-1/+6
record_btrace_resume returns the void return from the to_resume method of the target beneath. Split this into calling to_resume and return. gdb/ * record-btrace.c (record_btrace_resume): Fix void return.
2015-10-08Automatic date update in version.inGDB Administrator1-1/+1
2015-10-07Avoid using 'template' C++ keywordYao Qi7-12/+28
'template' is used in include/opcode/aarch64.h as below, typedef struct { const char *template; uint32_t value; int has_xt; } aarch64_sys_ins_reg; and it triggers compilation errors when GDB is built in C++ mode. In file included from git/gdb/aarch64-tdep.c:62:0: git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template' const char *template; This patch is to rename field template to name. gas/ * config/tc-aarch64.c (md_begin): Access field 'name' rather than 'template'. include/opcode/ * aarch64.h (aarch64_sys_ins_reg) <template>: Removed. <name>: New field. opcodes/ * aarch64-dis.c (aarch64_ext_sysins_op): Access field 'name' rather than 'template'. * aarch64-opc.c (aarch64_print_operand): Likewise.
2015-10-07Wrap include/opcode/aarch64.h in extern "C" for C++Yao Qi2-0/+12
This is sufficient to link an aarch64 GDB built in C++ mode. Pedro did something similar in Feb https://sourceware.org/ml/binutils/2015-02/msg00176.html include/opcode/ 2015-10-07 Yao Qi <yao.qi@linaro.org> * aarch64.h [__cplusplus]: Wrap in extern "C".
2015-10-07New ARC implementation.Nick Clifton140-8060/+31597
bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*. * emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.
2015-10-07gold: fix ABI pagesize for aarch64Andreas Schwab2-4/+8
* aarch64.cc (aarch64_info): Set abi_pagesize to 64K.
2015-10-07[aarch64] use aarch64_decode_insn to decode instructions in GDBYao Qi2-11/+28
In this patch, we start to use aarch64_decode_insn to decode instructions in aarch64_software_single_step. gdb: 2015-10-07 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c: Include opcode/aarch64.h. (submask): Move it above. (bit): Likewise. (bits): Likewise. (aarch64_software_single_step): Call aarch64_decode_insn. Decode instruction by aarch64_inst instead of using aarch64_decode_bcond and decode_masked_match.
2015-10-07Automatic date update in version.inGDB Administrator1-1/+1
2015-10-06Fix bug when applying R_SPARC_GOTDATA_OP* relocations to local symbols.Cary Coutant2-9/+16
When applying a GOTDATA_OP* relocation to a local symbol, the addend is being applied after getting the value of the symbol. When the relocation refers to a merge section, however, the addend must be provided when computing the symbol value, since the contents of the section may have been rearranged. gold/ PR gold/18855 * sparc.cc (Sparc_relocate_functions::gdop_hix22): Remove addend parameter. (Sparc_relocate_functions::gdop_lox10): Likewise. (Target_sparc::Relocate::relocate): Use addend when computing symbol value for R_SPARC_GOTDATA_OP*.
2015-10-06Clear the ch_reserved field in 64-bit outputH.J. Lu2-0/+8
It is better to clear the ch_reserved field of Elf64_External_Chdr in 64-bit output. * bfd.c (bfd_update_compression_header): Clear the ch_reserved field in 64-bit output. (bfd_convert_section_contents): Likewise.
2015-10-06parse load_offset (bias) of restore command as longPitchumani Sivanupandi2-2/+8
Following failures are noticed for avr-gdb. This may be the case for targets like AVR which has integer_to_address hook defined. FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok These tests are failed because load_offset(bias) of restore command parsed as address. command: restore filename [binary] bias start end Except binary, other BFDs have a built-in location; gdb restores content at offset 'bias' from that location. So, 'bias' of 'restore' command should be parsed as address only when the file is binary. Below patch changes gdb to parse 'bias' as long if the file is not binary. gdb/ChangeLog 2015-10-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com> * cli/cli-dump.c (restore_command): Parse load_offset (bias) as address only when the file is binary.
2015-10-06Automatic date update in version.inGDB Administrator1-1/+1
2015-10-05Don't re-export common symbolsH.J. Lu5-3/+23
For ELF linker, a common symbol isn't a definition. When we decide if a symbol should be re-exported, we should check if the symbol isn't undefined, not if it is a definition. bfd/ PR ld/18914 * elflink.c (elf_link_add_object_symbols): Don't re-export a symbol if it isn't undefined. ld/testsuite/ PR ld/18914 * ld-elf/exclude.exp: Also check exclude_common. * ld-elf/exclude2.s: Add exclude_common.
2015-10-05Automatic date update in version.inGDB Administrator1-1/+1
2015-10-04Enable IAMCU and PEI for Solaris2/x86H.J. Lu4-5/+14
bfd/ * config.bfd (targ_selvecs, targ64_selvecs): Add iamcu_elf32_vec, i386_pei_vec and x86_64_pei_vec for Solaris2/x86. ld/ * configure.tgt (targ_extra_emuls): Add elf_iamcu for Solaris2/x86.
2015-10-04Change ch_type to Elf_Word in struct Chdr_data<64>H.J. Lu3-5/+24
The ch_type field in struct Chdr_data<64> is 4 bytes, followed by a 4-byte padding. This change doesn't introduce any functional change since only the lower 32 bits of the ch_type field are used. PR gold/19060 * elfcpp.h (Chdr::get_ch_type): Change return type to Elf_Word. * elfcpp_internal.h (Chdr_data<64>): Change ch_type to 4 bytes and add ch_reserved.
2015-10-04Automatic date update in version.inGDB Administrator1-1/+1
2015-10-02[FT32] gdb: Correctly interpret function prologsjamesbowman2-6/+54
The stack unwinder did not understand the function prologs generated by gcc with -Os. Add code to recognize and interpret the prolog calls. [gdb] 2015-10-02 James Bowman <james.bowman@ftdichip.com> * ft32-tdep.c (ft32_analyze_prologue): Add function prolog subroutine handling.
2015-10-03Automatic date update in version.inGDB Administrator1-1/+1
2015-10-02Fix gdb.dwarf2/staticvirtual.exp regexp.Sandra Loosemore2-1/+11
2015-10-02 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match whether or not address 0x1000 is mapped on the target.
2015-10-02[LD][AARCH64]Add TLSIE relaxation support under large memory model.Renlin Li6-2/+103
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Add TLSIE_MOVW_GOTTPREL_G1. (aarch64_tls_transition_without_check): Add TLSIE_MOVW_GOTTPREL_G1 to TLSLE_MOVW_TPREL_G2 transition for local symbol. (elfNN_aarch64_tls_relax): Add a argument to pass tp offset. Add TLSIE_MOVW_GOTTPREL_G1 relaxation. (elfNN_aarch64_relocate_section): Call elfNN_aarch64_tls_relax with new argument. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/aarch64-elf.exp (tls-relax-large-le-ie): Run new test. * ld-aarch64/tls-relax-large-ie-le.d: New. * ld-aarch64/tls-relax-large-ie-le.s: New.
2015-10-02[LD][AARCH64]Add TLSDESC support for large memory model.Renlin Li11-3/+266
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_tls_transition_without_check): Add relax transitions for TLSDESC_ADD, TLSDESC_LDR, TLSDESC_OFF_G0_NC, TLSDESC_OFF_G1. (aarch64_tls_transition_without_check): Add relaxation support. (aarch64_reloc_got_type): Add support. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_tls_relax): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/aarch64-elf.exp: Run new test. * ld-aarch64/tls-large-desc.d: New. * ld-aarch64/tls-large-desc.s: New. * ld-aarch64/tls-relax-large-desc-ie.d: New. * ld-aarch64/tls-relax-large-desc-ie.s: New. * ld-aarch64/tls-relax-large-desc-le.d: New. * ld-aarch64/tls-relax-large-desc-le.s: New.
2015-10-02[GAS][AARCH64]Add TLSDESC large memory model support.Renlin Li11-1/+158
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (elfNN_aarch64_howto_table): Check overflow for BFD_RELOC_AARCH64_TLSDESC_OFF_G1. gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (s_tlsdescadd): New. (s_tlsdescldr): New. (md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops. (reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC. (process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and AARCH64_TLSDESC_OFF_G0_NC. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-tlsdesc_off_g0_nc.d: New. * gas/aarch64/reloc-tlsdesc_off_g0_nc.s: New. * gas/aarch64/reloc-tlsdesc_off_g1.d: New. * gas/aarch64/reloc-tlsdesc_off_g1.s: New. * gas/aarch64/tls-desc.d: New. * gas/aarch64/tls-desc.s: New.
2015-10-02[BFD][AARCH64]Add TLSGD relaxation support under large memory model.Renlin Li8-0/+148
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c(IS_AARCH64_TLS_RELAX_RELOC): Add relaxation support for TLSGD_MOVW_G0_NC and TLSGD_MOVW_G1. (aarch64_tls_transition_without_check): Likewise (elfNN_aarch64_tls_relax): Likwise. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/aarch64-elf.exp: run new test * ld-aarch64/tls-relax-large-gd-ie.d: New. * ld-aarch64/tls-relax-large-gd-ie.s: New. * ld-aarch64/tls-relax-large-gd-le.d: New. * ld-aarch64/tls-relax-large-gd-le.s: New.
2015-10-02[BFD][AARCH64]Create GOT section for TLSLE_MOVW_TPREL_G(1, 1_NC, 2).Renlin Li2-0/+8
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (elfNN_aarch64_check_relocs): Create GOT section for TLSLE_MOVW_TPREL_G(1, 1_NC, 2) relocation.
2015-10-02[Binutils][AARCH64]Add TLS IE large memory support.Renlin Li17-43/+180
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * reloc.c: Make AARCH64_TLSIE_MOVW_GOTTPREL_G1 and AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC defined in alphabetical order. * libbfd.h: Regenerate. * bfd-in2.h: Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Make TLSIE_MOVW_GOTTPREL_G1 check overflow. (aarch64_reloc_got_type): Add support for TLSIE_MOVW_GOTTPREL_G1 and TLSIE_MOVW_GOTTPREL_G0_NC. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): Add two entries for gottprel_g0_nc and gottprel_g1. (process_movw_reloc_info): Add support. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-gottprel_g0_nc.d: New. * gas/aarch64/reloc-gottprel_g0_nc.s: New. * gas/aarch64/reloc-gottprel_g1.d: New. * gas/aarch64/reloc-gottprel_g1.s: New. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/tls-large-ie.d: New. * ld-aarch64/tls-large-ie.s: New. * ld-aarch64/aarch64-elf.exp: Run new test.
2015-10-02[LD][AARCH64]Add BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC support.Renlin Li7-0/+74
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_reloc_got_type): Add BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC support. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/emit-relocs-516.d: New. * ld-aarch64/emit-relocs-516.s: New. * ld-aarch64/aarch64-elf.exp: Run new test.
2015-10-02[GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC support.Renlin Li10-0/+69
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * reloc.c (BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC): New entry. * elfnn-aarch64.c (elfNN_aarch64_howto_table): New entry for BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC. * libbfd.h: Regenerate. * bfd-in2.h: Likewise gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc. (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-tlsgd_g0_nc.d: New. * gas/aarch64/reloc-tlsgd_g0_nc.s: New.
2015-10-02[LD][AARCH64]Add BFD_RELOC_AARCH64_TLSGD_MOVW_G1 support.Renlin Li7-0/+80
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_reloc_got_type): Add BFD_RELOC_AARCH64_TLSGD_MOVW_G1 support. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. ld/testsuite 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/emit-relocs-515.d: New. * ld-aarch64/emit-relocs-515.s: New. * ld-aarch64/aarch64-elf.exp: Run new test.
2015-10-02[GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSGD_MOVW_G1 support.Renlin Li10-0/+70
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * reloc.c (BFD_RELOC_AARCH64_TLSGD_MOVW_G1): New entry. * elfnn-aarch64.c (elfNN_aarch64_howto_table): New entry for BFD_RELOC_AARCH64_TLSGD_MOVW_G1. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1. (process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-tlsgd_g1.s: New. * gas/aarch64/reloc-tlsgd_g1.s: New.
2015-10-02[LD][AARCH64]Add BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC Support.Renlin Li7-1/+61
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_reloc_got_type): Add BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC support. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/aarch64-elf.exp: Run new test. * ld-aarch64/emit-relocs-301.d: New. * ld-aarch64/emit-relocs-301.s: New.
2015-10-02[GAS][AARCH64]Add BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC Support.Renlin Li10-0/+70
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * reloc.c (BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC): New. * elfnn-aarch64.c (elfNN_aarch64_howto_table): New entry MOVW_GOTOFF_G0_NC. * libbfd.h: Regnerate. * bfd-in2.h: Regenerate. gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): New relocation modifier gotoff_g0_nc. (process_movw_reloc_info): Support gotoff_g0_nc. (md_apply_fix): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-gotoff_g0_nc.s: New. * gas/aarch64/reloc-gotoff_g0_nc.d: New.
2015-10-02[LD][AARCH64]Add BFD_RELOC_AARCH64_MOVW_GOTOFF_G1 Support.Renlin Li7-1/+62
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_reloc_got_type): Add support for BFD_RELOC_AARCH64_MOVW_GOTOFF_G1. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise (elfNN_aarch64_final_link_relocate): Calculate offset within GOT. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/emit-relocs-302.d: New. * ld-aarch64/emit-relocs-302.s: New. * ld-aarch64/aarch64-elf.exp: Run the new test.
2015-10-02[GAS][AARCH64]Add BFD_RELOC_AARCH64_MOVW_GOTOFF_G1 Support.Renlin Li10-0/+71
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * reloc.c (BFD_RELOC_AARCH64_MOVW_GOTOFF_G1): New. * elfnn-aarch64.c (elfNN_aarch64_howto_table): New entry for MOVW_GOTOFF_G1. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ 2015-10-02 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): New relocation modifier gotoff_g1. (process_movw_reloc_info): Support newly added modifier. (md_apply_fix): Likewise. gas/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * gas/aarch64/reloc-gotoff_g1.s: New. * gas/aarch64/reloc-gotoff_g1.d: New.
2015-10-02[LD][AARCH64]Add BFD_RELOC_AARCH64_LD64_GOTOFF_LO15 Support.Renlin Li7-1/+123
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (aarch64_reloc_got_type): Add BFD_RELOC_AARCH64_LD_64_GOTOFF_LO15 support. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise (elfNN_aarch64_final_link_relocate): Calculate offset within GOT. ld/testsuite/ 2015-10-02 Renlin Li <renlin.li@arm.com> * ld-aarch64/emit-relocs-310.d: New. * ld-aarch64/emit-relocs-310.s: New. * ld-aarch64/aarch64-elf.exp: Run the test.
2015-10-02[BFD][AARCH64]Refactor to facilitate further large memory model support patches.Renlin Li2-4/+17
bfd/ 2015-10-02 Renlin Li <renlin.li@arm.com> * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Change if to switch statement.
2015-10-02Make aarch64_zero_register_p declaration starts from column oneYao Qi2-2/+7
include/opcode: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64.h (aarch64_zero_register_p): Move the declaration to column one.
2015-10-02[aarch64] expose disas_aarch64_insn and rename it to aarch64_decode_insnYao Qi4-4/+19
We want to use disas_aarch64_insn inside GDB to decode instructions, so this patch exposes it and rename it to aarch64_decode_insn to follow the conventions of other interfaces. include/opcode: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64.h (aarch64_decode_insn): Declare it. opcodes: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c (disas_aarch64_insn): Remove static. Change argument insn type to aarch64_insn. Rename to ... (aarch64_decode_insn): ... it. (print_insn_aarch64_word): Caller updated.
2015-10-02[aarch64] Remove argument pc from disas_aarch64_insnYao Qi2-3/+7
I happen to see that argument pc is not used inside disas_aarch64_insn at all. This patch is to remove it. OK to apply? opcodes: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c (disas_aarch64_insn): Remove argument PC. (print_insn_aarch64_word): Caller updated.
2015-10-02Automatic date update in version.inGDB Administrator1-1/+1
2015-10-01Create a PLT entry for R_X86_64_PC32 in non-code sectionsH.J. Lu8-7/+83
Since something like ".long foo - ." may be used as pointer, we make sure that PLT is used if foo is a function defined in a shared library. bfd/ PR ld/19031 * elf64-x86-64.c (elf_x86_64_check_relocs): Set pointer_equality_needed for R_X86_64_PC32 reloc in non-code sections. ld/testsuite/ PR ld/19031 * ld-x86-64/x86-64.exp: Run PR ld/19031 test. * ld-x86-64/pr19031.out: New file. * ld-x86-64/pr19031a.c: Likewise. * ld-x86-64/pr19031b.S: Likewise. * ld-x86-64/pr19031c.c: Likewise.
2015-10-01vec.h: Add casts for C++ compatSimon Marchi2-3/+7
gdb/ChangeLog: * common/vec.h (VEC_OP (T,cleanup)): Add pointer cast.
generated by cgit v1.1 at 2024-12-14 08:24:39 +0000