Age | Commit message (Collapse) | Author | Files | Lines |
|
* gas/config/tc-arm.c (arm_cpus): Add core marvell-whitney.
|
|
|
|
or maybe not just yet, but this is better than a FIXME.
* ldexp.c (update_definedness): Return false if script symbol is
redefining a strong symbol in an object.
(exp_fold_tree_1 <etree_assign>): Set up for reporting a multiple
definition error, but for now leave disabled.
|
|
Trying to use the SEC_LINKER_CREATED section flag to determine whether
a symbol is linker defined fails to work on targets like alpha that
define special SEC_COMMON sections. These might contain symbols that
originated in an object file.
include/
* bfdlink.h (struct bfd_link_hash_entry): Comment non_ir_ref. Add
linker_def.
bfd/
* elflink.c (_bfd_elf_define_linkage_sym): Set linker_def.
* linker.c (_bfd_generic_link_add_one_symbol): Clear linker_def
for CDEF, DEF, DEFW, COM.
ld/
* ldexp.c (exp_fold_tree_1 <etree_provide>): Test linker_def.
ld/testsuite/
* ld-powerpc/sdabase.s,
* ld-powerpc/sdabase.t,
* ld-powerpc/sdabase.d: New test.
* ld-powerpc/sdabase2.t,
* ld-powerpc/sdabase2.d: New test.
* ld-powerpc/powerpc.exp: Run them.
|
|
This:
int end[100000];
int main(void) { end[99999] = 0; return 0; }
should not segfault.
ld/
* ldexp.c (exp_fold_tree_1 <etree_provide>): Leave bfd_link_hash_common
symbols alone.
ld/testsuite/
* ld-elf/endsym.s, *ld-elf/endsym.d: New test.
|
|
The old code missed testing bfd_link_hash_undefweak, and wrongly
excluded bfd_link_hash_common symbols. It is also clearer to invert
the set of enum bfd_link_hash_type values tested.
bfd_link_hash_indirect and bfd_link_hash_warning will never appear
here.
* ldexp.c (update_definedness): Correct logic setting by_object.
|
|
This moves support code for DEFINED to ldexp.c where it is used,
losing the lang_ prefix on identifiers. Two new functions are needed
to initialize and clean up to hash table, but other than that there
are no functional changes here.
* ldexp.c (struct definedness_hash_entry, definedness_table)
(definedness_newfunc, symbol_defined, update_definedness): Move
and rename from..
* ldlang.h (struct lang_definedness_hash_entry): ..here,..
* ldlang.c (lang_definedness_table, lang_definedness_newfunc)
(lang_symbol_defined, lang_update_definedness): ..and here.
* ldexp.c (ldexp_init, ldexp_finish): New functions, extracted from..
* ldlang.c (lang_init, lang_finish): ..here.
* ldexp.h (ldexp_init, ldexp_finish): Declare.
* ldlang.h (lang_symbol_defined, lang_update_definedness): Delete.
* ldmain.c (main): Call ldexp_init and ldexp_finish.
|
|
* po/es.po: Updated Esperanto translation.
* po/fr.po: Updated French translation.
* po/uk.po: Updated Ukrainian translation.
|
|
|
|
* dwarf.c (read_cie): Cast size to long to warn.
|
|
PR binutils/17531
* dwarf.c (decode_location_expression): Check for an out of range
value for a DW_OP_GNU_entry_value expression.
(display_debug_lines_raw): Check for a partial
.debug_line. section being encountered without a prior, full
.debug.line section.
(display_debug_lines_decoded): Likewise. Also check for
li_line_range being zero.
(display_debug_pubnames_worker): Check for an invalid pn_length
field.
(read_cie): Add range checks.
* elfcomm.c (setup_archive): Check for a negative longnames_size.
|
|
PR binutils/17512
* archive.c (do_slurp_bsd_armap): Return if the parsed_size is
zero.
(bfd_slurp_armap): Zero terminate the name.
(bfd_generic_stat_arch_elt): If there is no header, fail.
* elf32-arc.c (arc_info_to_howto_rel): Replace BFD_ASSERT with
error message.
* elf32-avr.c (avr_info_to_howto_rela): Likewise.
* elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise.
* elf32-cris.c (cris_info_to_howto_rela): Likewise.
* elf32-d10v.c (d10v_info_to_howto_rel): Likewise.
* elf32-d30v.c (d30v_info_to_howto_rel): Likewise.
* elf32-dlx.c (dlx_rtype_to_howto): Likewise.
* elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise.
* elf32-fr30.c (fr30_info_to_howto_rela): Likewise.
* elf32-frv.c (frv_info_to_howto_rela): Likewise.
* elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise.
* elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise.
* elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise.
* elf32-lm32.c (lm32_info_to_howto_rela): Likewise.
* elf32-m32c.c (m32c_info_to_howto_rela): Likewise.
* elf32-m32r.c (m32r_info_to_howto_rel): Likewise.
* elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise.
* elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise.
* elf32-mep.c (mep_info_to_howto_rela): Likewise.
* elf32-metag.c (metag_info_to_howto_rela): Likewise.
* elf32-moxie.c (moxie_info_to_howto_rela): Likewise.
* elf32-msp430.c (msp430_info_to_howto_rela): Likewise.
* elf32-mt.c (mt_info_to_howto_rela): Likewise.
* elf32-nds32.c (nds32_info_to_howto_rel): Likewise.
* elf32-or1k.c (or1k_info_to_howto_rela): Likewise.
* elf32-rl78.c (rl78_info_to_howto_rela): Likewise.
* elf32-rx.c (rx_info_to_howto_rela): Likewise.
* elf32-v850.c (v850_elf_info_to_howto_rel): Likewise.
* elf32-visium.c (visium_info_to_howto_rela): Likewise.
* elf32-xgate.c (xgate_info_to_howto_rel): Likewise.
* elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise.
* elf64-mmix.c (mmix_info_to_howto_rela): Likewise.
* elf64-x86-64.c (elf_x86_64_reloc_type_lookup): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_bfd_reloc_from_type): Likewise.
* elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Add range
checking of reloc symbol index.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): If no symbols have
been provided then set the reloc's symbol to undefined.
* reloc.c (bfd_generic_get_relocated_section_contents): Add range
checking of the reloc to be applied.
* versados.c (process_otr): Add more range checks.
(versados_canonicalize_reloc): If the section is unknown, set the
symbol to undefined.
* vms-alpha.c (_bfd_vms_slurp_eisd): Add range checks.
(alpha_vms_object_p): Likewise.
|
|
* powerpc.cc (Target_powerpc::relocate): Fix overflow check.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_symbol_via_all_imports): New function.
(cp_lookup_symbol_namespace): Call it.
(cp_lookup_symbol_nonlocal): Ditto.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_symbol_via_imports): New arg
"search_scope_first". All callers updated.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_nested_symbol_1): New function.
(cp_basic_lookup_symbol): Renamed from lookup_symbol_file. Delete
arg "search". All callers updated.
(cp_lookup_bare_symbol): New function.
(cp_search_static_and_baseclasses): New function.
(cp_lookup_symbol_in_namespace): Rewrite, move more logic here.
(find_symbol_in_baseclass): Simplify, call cp_lookup_nested_symbol_1.
(cp_lookup_nested_symbol): Ditto.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_symbol_in_namespace): Simplify.
|
|
gdb/ChangeLog:
* cp-namespace.c: Whitespace cleanup.
|
|
|
|
|
|
This patch fixes a problem when trying to insert a breakpoint on
a specific symbol defined in a specific file, eg:
break foo.c:func
This currently works for files in C/C++/Ada, etc, but doesn't always
work for Asm files. Analysis of the problem showed that this related
to a limitation in gas, which does not generate debug info for functions/
symbols. Thus, we have a symtab for the file ("info sources" shows
the file), but it contains no symbols.
When find_linespec_symbols is called in linespec_parse_basic, it calls
find_function_symbols, which uses add_matching_symbols_to_info to
collect all matching symbols.
That function does [pardon any mangled formatting]:
for (ix = 0; VEC_iterate (symtab_ptr, info->file_symtabs, ix, elt); ++ix)
{
if (elt == NULL)
{
iterate_over_all_matching_symtabs (info->state, name, VAR_DOMAIN,
collect_symbols, info,
pspace, 1);
search_minsyms_for_name (info, name, pspace);
}
else if (pspace == NULL || pspace == SYMTAB_PSPACE (elt))
{
/* Program spaces that are executing startup should have
been filtered out earlier. */
gdb_assert (!SYMTAB_PSPACE (elt)->executing_startup);
set_current_program_space (SYMTAB_PSPACE (elt));
iterate_over_file_blocks (elt, name, VAR_DOMAIN,
collect_symbols, info);
}
}
This iterates over the symtabs. In the failing use case, ELT is
non-NULL (points to the symtab for the .s file), so it calls
iterate_over_file_blocks. Herein is where the problem exists: it is
assumed that if NAME exists, it must exist in the given symtab -- a
reasonable assumption for "normal" (non-asm) cases. It never searches
minimal symbols (or in the global default symtab).
This patch fixes the problem by doing so. It is important to note that
iterating over minsyms is fairly expensive, so this patch only adds
that extra search if the language is language_asm and
iterate_over_file_blocks returns no symbols.
gdb/ChangeLog:
2014-12-20 Keith Seitz <keiths@redhat.com>
Mihail-Marian Nistor <mihail.nistor@freescale.com>
PR gdb/17394
* linespec.c (struct collect_minsyms): Add new member `symtab'.
(add_minsym): Handle cases where info.symtab is non-NULL.
(search_minsyms_for_name): Add new parameter `symtab'.
Handle limiting searches to a specific symtab.
(add_matching_symtabs_to_info): Search through minimal symbols
for language_asm files for which no new symbols are found.
gdb/testsuite/ChangeLog:
2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
PR gdb/17394
* gdb.linespec/break-asm-file.c: New file.
* gdb.linespec/break-asm-file.exp: New file.
* gdb.linespec/break-asm-file0.s: New file.
* gdb.linespec/break-asm-file1.s: New file.
|
|
The debug_msg test has 2 implementations of SometimesInlineFunction:
int SometimesInlineFunction(int i) { return i; }
int SometimesInlineFunction(int i) { return i * i; }
and One Definition Rule (ODR) violation detection expects they will be
compiled into functions of different sizes. Hower, on x86, GCC 4.7 and
newer compile them into functions of the same size and ODR violation
detection test fails. This patch changes
int SometimesInlineFunction(int i) { return i; }
to
int SometimesInlineFunction(int i) { return i * i * 3; }
so that it will be compiled into a function of larger size.
PR gold/14608
* testsuite/debug_msg.cc (SometimesInlineFunction): Changed
to "return i * i * 3;".
|
|
|
|
gas/
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
gas/testsuite/
* gas/mips/r6-64.s: Remove .align directives from LDPC
instructions and add further tests for LDPC.
* gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected
output and update for new tests.
* gas/mips/r6-64-n64.d: Likewise.
* gas/mips/ldpc-unalign.l: New file.
* gas/mips/ldpc-unalign.s: Likewise.
* gas/mips/mips.exp: Run ldpc-unalign test.
|
|
gas/testsuite/
* gas/mips/octeon3.d: Switch to use numeric register names.
|
|
ld/testsuite/
* ld-mips-elf/attr-gnu-4-00.d: Relax check for ISA extension.
* ld-mips-elf/attr-gnu-4-01.d: Likewise.
* ld-mips-elf/attr-gnu-4-02.d: Likewise.
* ld-mips-elf/attr-gnu-4-03.d: Likewise.
* ld-mips-elf/attr-gnu-4-08.d: Likewise.
* ld-mips-elf/attr-gnu-4-10.d: Likewise.
* ld-mips-elf/attr-gnu-4-11.d: Likewise.
* ld-mips-elf/attr-gnu-4-18.d: Likewise.
* ld-mips-elf/attr-gnu-4-20.d: Likewise.
* ld-mips-elf/attr-gnu-4-22.d: Likewise.
* ld-mips-elf/attr-gnu-4-28.d: Likewise.
* ld-mips-elf/attr-gnu-4-30.d: Likewise.
* ld-mips-elf/attr-gnu-4-33.d: Likewise.
* ld-mips-elf/attr-gnu-4-38.d: Likewise.
* ld-mips-elf/attr-gnu-4-44.d: Likewise.
|
|
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Update undefweak-overflow tests.
* ld-mips-elf/undefweak-overflow-n32.d: Remove.
* ld-mips-elf/undefweak-overflow-n64.d: Likewise.
* ld-mips-elf/undefweak-overflow.s: Set mips64r6, noreorder and
add a label to mark the micromips region.
* ld-mips-elf/undefweak-overflow.d: Update expected output.
|
|
This patch is to add SDE OS ABI support in GDB, which has been used in
codesourcery gdb tree for some years.
gdb:
2014-12-19 Maciej W. Rozycki <macro@codesourcery.com>
Nigel Stephens <nigel@mips.com>
Chris Dearman <chris@mips.com>
Luis Machado <lgustavo@codesourcery.com>
* Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o.
(ALLDEPFILES): Add mips-sde-tdep.c.
* mips-sde-tdep.c: New file containg SDE specific code.
* configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to
gdb_target_obs.
* defs.h (gdb_osabi): Add GDB_OSABI_SDE.
* osabi.c (gdb_osabi_names): Add SDE.
* NEWS: Mention the change.
|
|
|
|
bfd/
* elf32-ppc.c (ELF_COMMONPAGESIZE): Set to 64k.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Likewise.
|
|
I stumbled upon a few comments that I think are outdated.
Comment for elfread.c (elf_symfile_init): As far as history goes in git,
I don't see anything related to that.
Comment for elfread.c (elf_symfile_read): References a parameter that was
removed in 1999.
Comment for struct sym_fns/sym_offsets: References a parameter that was
changed in 1999.
gdb/ChangeLog:
* elfread.c (elf_symfile_init): Remove stale comment.
(elf_symfile_read): Same.
* symfile.h (struct sym_fns): Same.
|
|
This patch is the V2. V1 can be found in
https://sourceware.org/ml/gdb-patches/2012-05/msg00938.html
V2 is to address Joel's comment
<https://sourceware.org/ml/gdb-patches/2012-06/msg00289.html> about
keeping dumping floating point registers. Additionally, command
'info float' prints bits on nan2008 and abs2008.
------------------------------------------------------------------
The change below provides a MIPS-specific handler for the:
(gdb) info float
command. It provides information about the FPU type available (if any),
the FPU register width, and decodes the CP1 Floating Point Control and
Status Register (FCSR):
(gdb) print /x $fsr
$1 = 0xff83ffff
(gdb) info float
fpu type: double-precision
reg size: 32 bits
cond : 0 1 2 3 4 5 6 7
cause : inexact uflow oflow div0 inval unimp
mask : inexact uflow oflow div0 inval
flags : inexact uflow oflow div0 inval
rounding: -inf
flush : zero
One point to note about CP1.FCSR are the non-standard Flush-to-Nearest
and Flush-Override bits. They are not a part of the MIPS architecture and
take two positions reserved for an implementation-dependent use in the
architecture. They are present in all the FPU implementations made by
MIPS Technologies since the spin-off from SGI.
I haven't been able to track down a single other MIPS FPU implementation
that would make any use of these bits and they are required to be
hardwired to zero by the architecture specification if unimplemented.
Therefore I think it makes sense to report them in the current way.
GDB has no guaranteed access to the CP0 Processor Identification (PRId)
register to validate this feature properly and the ID information stored
in the CP1 Floating Point Implementation Register (FIR) is from my
experience not reliable enough (there's no Company ID available there for
once unlike in CP0.PRId and Processor ID is not guaranteed to be unique).
As a side note we should probably dump CP1.FIR information as well, as
there's useful stuff indicating some FPU features there. That's material
for another change however.
gdb/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips-tdep.c (print_fpu_flags): New function.
(mips_print_float_info): Likewise.
(mips_gdbarch_init): Install mips_print_float_info as gdbarch
print_float_info routine.
gdb/testsuite/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/float.exp: Handle the new output from "info float" on
MIPS targets.
|
|
This patch is to change print_float_info gdbarch method for the
following two reasons,
1. we want to add a default implementation of print_float_info to
dump the float pointer registers. It can be reused by backend to
print something more than float point registers.
2. we want to simplify the caller of print_float_info,
infcmd.c:print_float_info.
gdb:
2014-12-18 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (print_float_info): Change its type from 'M' to 'm'.
* gdbarch.c: Re-generated.
* gdbarch.h: Likewise.
* infcmd.c (default_print_float_info): New function.
(print_float_info): Removed. Move code to
default_print_float_info.
(float_info): Adjust to call gdbarch_print_float_info.
* inferior.h (default_print_float_info): Declare it.
|
|
In infcmd.c:print_float_info, if the architecture doesn't have gdbarch
method print_float_info implemented and doesn't float reggroup, GDB
will prints "No floating-point info available for this processor."
The h8300 port doesn't have float registers, and don't need to
implement print_float_info. This patch is to remove it.
gdb:
2014-12-18 Yao Qi <yao@codesourcery.com>
* h8300-tdep.c (h8300_print_float_info): Remove.
(h8300_gdbarch_init): Remove the call to
set_gdbarch_print_float_info.
|
|
gdb/ChangeLog:
* infcmd.c (jump_command): Minor simplification.
|
|
language_lookup_primitive_type_by_name.
gdb/ChangeLog:
* language.c (language_lookup_primitive_type): Renamed from
language_lookup_primitive_type_by_name. All callers updated.
|
|
|
|
* dwarf.c (read_and_display_attr_value): Change display name of
DW_LANG_C11 from (ANSI C11) to (C11).
|
|
|
|
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
|
|
Anytime you can remove a symbol lookup that loops over all objfiles
is A Good Thing.
The call to lookup_static_symbol in valops.c:value_maybe_namespace_elt
is redundant with this call in cp_lookup_nested_symbol:
/* Now search all static file-level symbols. We have to do this
for things like typedefs in the class. We do not try to
guess any imported namespace as even the fully specified
namespace search is already not C++ compliant and more
assumptions could make it too magic. */
size = strlen (parent_name) + 2 + strlen (nested_name) + 1;
concatenated_name = alloca (size);
xsnprintf (concatenated_name, size, "%s::%s",
parent_name, nested_name);
sym = lookup_static_symbol (concatenated_name, VAR_DOMAIN);
if (sym != NULL)
return sym;
Earlier in value_maybe_namespace_elt we do this:
sym = cp_lookup_symbol_namespace (namespace_name, name,
get_selected_block (0), VAR_DOMAIN);
That sequence goes like:
value_maybe_namespace_elt
-> cp_lookup_symbol_namespace
-> cp_lookup_symbol_in_namespace
-> lookup_symbol_file
-> cp_lookup_nested_symbol
-> lookup_static_symbol
The call was added in commit 41f62f3939b1c69e68ef5652feb44fef90eb85c9.
https://sourceware.org/ml/gdb-patches/2010-06/msg00663.html
With a part 2 here:
https://sourceware.org/ml/gdb-patches/2010-06/msg00664.html
At the time the call to lookup_static_symbol (spelled
lookup_static_symbol_aux at the time) was needed.
However, this patch, 8dea366bbed7986295681c101dcfbd35aeb6dfc4,
https://sourceware.org/ml/gdb-patches/2012-11/msg00387.html
augmented lookup_symbol_file to call cp_lookup_nested_symbol
and introduced the redundancy.
It's kinda buried, so it's totally not unexpected that this happened.
gdb/ChangeLog:
* valops.c (value_maybe_namespace_elt): Remove redundant call to
lookup_static_symbol.
|
|
gdb/ChangeLog:
New parameter "debug symbol-lookup".
* NEWS: Mention it.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Add debug
output.
(cp_lookup_symbol_namespace, cp_lookup_symbol_nonlocal): Ditto.
(cp_lookup_nested_symbol): Ditto.
* language.c (language_lookup_primitive_type_by_name): Add debug
output.
* minsyms.c (lookup_minimal_symbol): Add debug output.
* objfiles.c (objfile_debug_name): Moved here, and renamed ...
* symfile-debug.c (debug_objfile_name): ... from here. All callers
updated.
* objfiles.h (objfile_debug_name): Declare.
* symtab.h (symbol_lookup_debug): Declare.
* symtab.c (symbol_lookup_debug): New global.
(lookup_language_this): Add debug output.
(lookup_symbol_aux, lookup_symbol_in_block): Ditto.
(lookup_symbol_in_objfile_symtabs, lookup_symbol_via_quick_fns): Ditto.
(lookup_symbol_in_static_block, lookup_symbol_in_objfile): Ditto.
(_initialize_symtab): Add new parameter "debug symbol-lookup".
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "debug symbol-lookup".
|
|
gdb/ChangeLog:
* buildsym.c: Add comments describing how the buildsym machinery
is used by the various file formats.
(really_free_pendings): Enhance function comment.
See pending_macros to NULL. Simplify resetting pending_addrmap.
Call free_buildsym_compunit.
(free_buildsym_compunit): Set current_subfile to NULL.
(prepare_for_building): New function.
(start_symtab): Call it. Remove call to set_last_source_file.
(restart_symtab): New arg "cust". All callers updated.
Simplify, call prepare_for_building. Re-initialize buildsym_compunit.
(reset_symtab_globals): Enhance function comment.
Set local_symbols, file_symbols, global_symbols to NULL.
Set pending_macros to NULL. Simplify resetting pending_addrmap.
Call free_buildysym_compunit.
(end_symtab_without_blockvector): Delete. All callers updated.
(end_symtab_with_blockvector): Remove redundant call to
free_buildsym_compunit.
(augment_type_symtab): Remove arg "cust". All callers updated.
(buildsym_init): Remove resetting of free_pendings, file_symbols,
global_symbols, pending_blocks, pending_macros. Instead make
handling consistent with pending_addrmap: Assert value was reset
at end of previous symtab building. Initialize context_stack here.
|
|
gdb/ChangeLog:
* boards/stabs.exp: New file.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_symbol_via_imports): Renamed from
cp_lookup_symbol_imports. All callers updated.
|
|
gdb/ChangeLog:
* cp-namespace.c (cp_find_type_baseclass_by_name): Renamed from
find_type_baseclass_by_name. All callers updated.
|
|
gdb/ChangeLog:
* symtab.h (struct symbol_search) <symtab>: Delete. All uses updated.
* symtab.c (compare_search_syms): Use SYMBOL_SYMTAB accessor.
(print_symbol_info): Delete arg symtab. All callers updated.
(symtab_symbol_info): Use SYMBOL_SYMTAB accessor.
|
|
|
|
together.
gold/
* mapfile.cc (Mapfile::print_input_section): Print uncompressed sizes.
(Mapfile::print_output_data): Use current_data_size() to avoid
assert for sections requiring postprocessing; if address is not valid,
print 0.
(Mapfile::print_output_section): Use current_data_size(); print note
that addresses and sizes are before compression.
|
|
gas/testsuite/
* gas/mips/attr-gnu-4-5.d: Ignore ASEs.
* gas/mips/attr-gnu-4-6.d: Likewise.
* gas/mips/attr-gnu-4-7.d: Likewise.
* gas/mips/attr-none-o32-fp64-nooddspreg.d: Likewise.
* gas/mips/attr-none-o32-fp64.d: Likewise.
* gas/mips/attr-none-o32-fpxx.d: Likewise.
|