aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-06-18Rename bfd_plugin_uknown to bfd_plugin_unknownH.J. Lu6-4/+17
bfd/ * bfd.c (bfd_plugin_format): Rename bfd_plugin_uknown to bfd_plugin_unknown. * bfd-in2.h: Regenerated. * plugin.c (bfd_plugin_object_p): Replace bfd_plugin_uknown with bfd_plugin_unknown. ld/ * plugin.c (plugin_object_p): Replace bfd_plugin_uknown with bfd_plugin_unknown.
2016-06-18Don't generate PLT for IFUNC GOT/pointer referenceH.J. Lu89-342/+1876
If a backend supports it, PLT entry isn't needed when all references to a STT_GNU_IFUNC symbols are done via GOT or static function pointers. For GOT entries, We generate dynamic R_*_GLOB_DAT relocations for preemptable symbols and R_*_IRELATIVE relocations for non-preemptable symbols to update them with real function address. For static pointer pointers, we generate dynamic pointer relocations and store them in: 1. .rel[a].ifunc section in PIC object. 2. .rel[a].got section in dynamic executable. 3. .rel[a].iplt section in static executable. We don't allocate GOT entry if it isn't used. bfd/ PR ld/20253 * elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): Add an bfd_boolean argument. * elf-ifunc.c (_bfd_elf_create_ifunc_sections): Replace "shared object" with "PIC object" in comments. (_bfd_elf_allocate_ifunc_dyn_relocs): Updated. Replace "shared object" with "PIC object" in comments. Avoid PLT if requested. Generate dynamic relocations for non-GOT references. Make room for the special first entry in PLT and allocate PLT entry only for PLT and PC-relative references. Store dynamic GOT relocations in .rel[a].iplt section for static executables. If PLT isn't used, always use GOT for symbol value. Don't allocate GOT entry if it isn't used. * elf32-i386.c (elf_i386_check_relocs): Increment PLT reference count only in the code section. Allocate dynamic pointer relocation against STT_GNU_IFUNC symbol in the non-code section. (elf_i386_adjust_dynamic_symbol): Increment PLT reference count only for PC-relative references. (elf_i386_allocate_dynrelocs): Pass TRUE to _bfd_elf_allocate_ifunc_dyn_relocs. (elf_i386_relocate_section): Allow R_386_GOT32/R_386_GOT32X relocations against STT_GNU_IFUNC symbols without PLT. Generate dynamic pointer relocation against STT_GNU_IFUNC symbol in the non-code section and store it in the proper REL section. Don't allow non-pointer relocation against STT_GNU_IFUNC symbol without PLT. (elf_i386_finish_dynamic_symbol): Generate dynamic R_386_IRELATIVE and R_386_GLOB_DAT GOT relocations against STT_GNU_IFUNC symbols without PLT. (elf_i386_finish_dynamic_sections): Don't handle local STT_GNU_IFUNC symbols here. (elf_i386_output_arch_local_syms): Handle local STT_GNU_IFUNC symbols here. (elf_backend_output_arch_local_syms): New. * elf32-x86-64.c (elf_i386_check_relocs): Increment PLT reference count only in the code section. Allocate dynamic pointer relocation against STT_GNU_IFUNC symbol in the non-code section. (elf_x86_64_adjust_dynamic_symbol): Increment PLT reference count only for PC-relative references. (elf_x86_64_allocate_dynrelocs): Pass TRUE to _bfd_elf_allocate_ifunc_dyn_relocs. (elf_x86_64_relocate_section): Allow R_X86_64_GOTPCREL, R_X86_64_GOTPCRELX, R_X86_64_REX_GOTPCRELX and R_X86_64_GOTPCREL64 relocations against STT_GNU_IFUNC symbols without PLT. Generate dynamic pointer relocation against STT_GNU_IFUNC symbol in the non-code section and store it in the proper RELA section. Don't allow non-pointer relocation against STT_GNU_IFUNC symbol without PLT. (elf_x86_64_finish_dynamic_symbol): Generate dynamic R_X86_64_IRELATIVE and R_X86_64_GLOB_DAT GOT relocations against STT_GNU_IFUNC symbols without PLT. (elf_x86_64_finish_dynamic_sections): Don't handle local STT_GNU_IFUNC symbols here. (elf_x86_64_output_arch_local_syms): Handle local STT_GNU_IFUNC symbols here. (elf_backend_output_arch_local_syms): New. * elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs): Pass FALSE to _bfd_elf_allocate_ifunc_dyn_relocs. ld/ PR ld/20253 * testsuite/ld-i386/i386.exp: Run PR ld/20253 tests. * testsuite/ld-i386/no-plt.exp: Likewise. * testsuite/ld-x86-64/no-plt.exp: Likewise. * testsuite/ld-i386/pr13302.d: Remove .rel.plt section. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-x86-64/pr13082-5a.d: Likewise. * testsuite/ld-x86-64/pr13082-5b.d: Likewise. * testsuite/ld-x86-64/pr13082-6a.d: Likewise. * testsuite/ld-x86-64/pr13082-6b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Remove .plt section. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Updated. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-i386/pr20253-1a.c: New file. * testsuite/ld-i386/pr20253-1b.S: Likewise. * testsuite/ld-i386/pr20253-1c.S: Likewise. * testsuite/ld-i386/pr20253-1d.S: Likewise. * testsuite/ld-i386/pr20253-2a.c: Likewise. * testsuite/ld-i386/pr20253-2b.S: Likewise. * testsuite/ld-i386/pr20253-2c.S: Likewise. * testsuite/ld-i386/pr20253-2d.S: Likewise. * testsuite/ld-i386/pr20253-3.d: Likewise. * testsuite/ld-i386/pr20253-3.s: Likewise. * testsuite/ld-i386/pr20253-4.s: Likewise. * testsuite/ld-i386/pr20253-4a.d: Likewise. * testsuite/ld-i386/pr20253-4b.d: Likewise. * testsuite/ld-i386/pr20253-4c.d: Likewise. * testsuite/ld-i386/pr20253-5.d: Likewise. * testsuite/ld-i386/pr20253-5.s: Likewise. * testsuite/ld-ifunc/ifunc-23-x86.s: Likewise. * testsuite/ld-ifunc/ifunc-23a-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-23b-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-23c-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-24-x86.s: Likewise. * testsuite/ld-ifunc/ifunc-24a-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-24b-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-24c-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-25-x86.s: Likewise. * testsuite/ld-ifunc/ifunc-25a-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-25b-x86.d: Likewise. * testsuite/ld-ifunc/ifunc-25c-x86.d: Likewise. * testsuite/ld-x86-64/pr20253-1.s: Likewise. * testsuite/ld-x86-64/pr20253-1a.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1c.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1e.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1g.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1i.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1k.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr20253-2a.c: Likewise. * testsuite/ld-x86-64/pr20253-2b.S: Likewise. * testsuite/ld-x86-64/pr20253-2c.S: Likewise. * testsuite/ld-x86-64/pr20253-2d.S: Likewise. * testsuite/ld-x86-64/pr20253-3.d: Likewise. * testsuite/ld-x86-64/pr20253-3.s: Likewise. * testsuite/ld-x86-64/pr20253-4.s: Likewise. * testsuite/ld-x86-64/pr20253-4a.d: Likewise. * testsuite/ld-x86-64/pr20253-4b.d: Likewise. * testsuite/ld-x86-64/pr20253-4c.d: Likewise. * testsuite/ld-x86-64/pr20253-4d.d: Likewise. * testsuite/ld-x86-64/pr20253-4e.d: Likewise. * testsuite/ld-x86-64/pr20253-4f.d: Likewise. * testsuite/ld-x86-64/pr20253-5.s: Likewise. * testsuite/ld-x86-64/pr20253-5a.d: Likewise. * testsuite/ld-x86-64/pr20253-5b.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Remove extra IRELATIVE relocation. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a.s: Fix a typo. * testsuite/ld-x86-64/x86-64.exp: Run pr20253-1 tests.
2016-06-18Automatic date update in version.inGDB Administrator1-1/+1
2016-06-17Add a test case for the jit-reader interfaceSanjoy Das7-9/+385
Originally intended to be committed on 2013-01-17 in 675921c059dbaddd02ab2eb8a1eaf77b3ac727dd (Test case for the jit-reader), but by mistake the files were not added. Fortunately they still work. gdb/testsuite/ChangeLog: 2016-06-17 Sanjoy Das <sanjoy@playingwithpointers.com> * gdb.base/jit-reader.exp: New file. * gdb.base/jithost.c: New file. * gdb.base/jithost.h: New file. * gdb.base/jitreader.c : New file. * gdb.base/jit-protocol.h: New file.
2016-06-17Add support for Thumb-2 long branch veneersThomas Preud'homme7-15/+58
2016-06-17 Thomas Preud'homme <thomas.preudhomme@arm.com> Tony Wang <tony.wang@arm.com> bfd/ * elf32-arm.c (elf32_arm_stub_long_branch_thumb2_only): Define stub sequence. (stub_long_branch_thumb2_only): Define stub. (arm_stub_is_thumb): Add case for arm_stub_long_branch_thumb2_only. (arm_stub_long_branch_thumb2_only): Likewise. (arm_type_of_stub): Use arm_stub_long_branch_thumb2_only for Thumb-2 capable targets. ld/ * testsuite/ld-arm/arm-elf.exp (Thumb-Thumb farcall M profile): Assemble for ARMv6-M. (Thumb2-Thumb2 farcall M profile): New testcase. * testsuite/ld-arm/farcall-thumb2-thumb2-m.d: New file. * testsuite/ld-arm/jump-reloc-veneers-cond-long-backward.d: Update to reflect the use of Thumb-2 veneers for Thumb-2 capable targets. * testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Likewise.
2016-06-17Extend step-over-syscall.exp with different detach-on-fork and follow-fork modesYao Qi2-8/+53
This patch extends step-over-syscall.exp by setting different values to detach-on-fork and follow-fork. gdb/testsuite: 2016-06-17 Yao Qi <yao.qi@linaro.org> * gdb.base/step-over-syscall.exp (break_cond_on_syscall): New parameters follow_fork and detach_on_fork. Set follow-fork-mode and detach-on-fork. Adjust tests. (top level): Invoke break_cond_on_syscall with combinations of syscall, follow-fork-mode and detach-on-fork.
2016-06-17Handle reinsert breakpoints for vforked childYao Qi4-5/+91
When a thread is doing step-over with reinsert breakpoint, and the instruction executed is a syscall doing vfork, both parent and child share the memory, so the reinsert breakpoint in the space is visible to both of them. Also, removing the reinsert breakpoints from the child will effectively remove them from the parent. We should carefully manipulate reinsert breakpoints for both processes. What we are doing here is that - uninsert reinsert breakpoints from the parent before cloning the breakpoint list. We use "uninsert" instead of "remove", because we need to "reinsert" them back after vfork is done. In fact, "uninsert" removes them from both child and parent process space. - reinsert breakpoints in parent process are still copied to child's breakpoint list, - remove them from child's breakpoint list as what we did for fork, at this point, reinsert breakpoints are removed from the child and the parent, but they are still tracked by the parent's breakpoint list, - once vfork is done, "reinsert" them back to the parent, gdb/gdbserver: 2016-06-17 Yao Qi <yao.qi@linaro.org> * linux-low.c (handle_extended_wait): Call uninsert_reinsert_breakpoints for the parent process. Remove reinsert breakpoints from the child process. Reinsert them to the parent process when vfork is done. * mem-break.c (uninsert_reinsert_breakpoints): New function. (reinsert_reinsert_breakpoints): New function. * mem-break.h (uninsert_reinsert_breakpoints): Declare (reinsert_reinsert_breakpoints): Declare.
2016-06-17Delete reinsert breakpoints from forked childYao Qi2-0/+26
When a thread is stepping over a syscall instruction with software single step, GDBserver inserts reinsert breakpoints at the next pcs. If the syscall call is fork, the forked child has reinsert breakpoint in its space, and GDBserver clones parent's breakpoint list to child's. When GDBserver resumes the child, its bp_reinsert is zero, but has reinsert breakpoints, so the following assert is triggered if I apply the patch extending step-over-syscall.exp. gdb/gdbserver/linux-low.c:4292: A problem internal to GDBserver has been detected.^M void linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*): Assertion `!has_reinsert_breakpoints (proc)' failed. gdb/gdbserver: 2016-06-17 Yao Qi <yao.qi@linaro.org> * linux-low.c (handle_extended_wait): If the parent is doing step-over, remove the reinsert breakpoints from the forked child.
2016-06-17Step over exit with reinsert breakpointsYao Qi5-0/+196
This patch fixes a GDBserver crash when one thread is stepping over a syscall instruction which is exit. Step-over isn't finished due to the exit, but GDBserver doesn't clean up the state of step-over, so in the wait next time, GDBserver will wait on step_over_bkpt, which is already exited, and GDBserver crashes because 'requested_child' is NULL. See gdbserver logs below, Need step over [LWP 14858]? yes, found breakpoint at 0x2aaaaad91307^M proceed_all_lwps: found thread 14858 needing a step-over^M Starting step-over on LWP 14858. Stopping all threads^M >>>> entering void stop_all_lwps(int, lwp_info*) .... <<<< exiting void stop_all_lwps(int, lwp_info*)^M Done stopping all threads for step-over.^M pc is 0x2aaaaad91307^M Writing 0f to 0x2aaaaad91307 in process 14858^M Could not find fast tracepoint jump at 0x2aaaaad91307 in list (uninserting).^M pending reinsert at 0x2aaaaad91307^M step from pc 0x2aaaaad91307^M Resuming lwp 14858 (step, signal 0, stop not expected)^M # Start step-over for LWP 14858 >>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int) .... LLFE: 14858 exited. ... <<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int) # LWP 14858 exited ..... >>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)^M linux_wait_1: [<all threads>]^M step_over_bkpt set [LWP 14858.14858], doing a blocking wait # but step_over_bkpt is still LWP 14858, which is wrong The fix is to finish step-over if it is ongoing, and unsuspend other threads. Without the fix in linux-low.c, GDBserver will crash in with running gdb.base/step-over-exit.exp. gdb/gdbserver: 2016-06-17 Yao Qi <yao.qi@linaro.org> * linux-low.c (unsuspend_all_lwps): Declare. (linux_low_filter_event): If thread exited, call finish_step_over. If step-over is finished, unsuspend other threads. gdb/testsuite: 2016-06-17 Yao Qi <yao.qi@linaro.org> * gdb.base/step-over-exit.c: New. * gdb.base/step-over-exit.exp: New.
2016-06-17More assert checks on reinsert breakpointYao Qi3-1/+19
This patch adds more asserts, so the incorrect or sub-optimal reinsert breakpoints manipulations (from the tests in the following patches) can trigger them. gdb/gdbserver: 2016-06-17 Yao Qi <yao.qi@linaro.org> * linux-low.c (linux_resume_one_lwp_throw): Assert has_reinsert_breakpoints returns false. * mem-break.c (delete_disabled_breakpoints): Assert bp type isn't reinsert_breakpoint.
2016-06-17Switch to current thread in finish_step_overYao Qi4-4/+67
This patch adds some sanity check that reinsert breakpoints must be there when doing step-over on software single step target. The check triggers an assert when running forking-threads-plus-breakpoint.exp on arm-linux target, gdb/gdbserver/linux-low.c:4714: A problem internal to GDBserver has been detected.^M int finish_step_over(lwp_info*): Assertion `has_reinsert_breakpoints ()' failed. the error happens when GDBserver has already resumed a thread of process A for step-over (and wait for it hitting reinsert breakpoint), but receives detach request for process B from GDB, which is shown in the backtrace below, (gdb) bt #2 0x000228aa in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4703 #3 0x00025a50 in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4749 #4 complete_ongoing_step_over () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4760 #5 linux_detach (pid=25228) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:1503 #6 0x00012bae in process_serial_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3974 #7 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:4347 #8 0x00016d68 in handle_file_event (event_file_desc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:429 #9 0x000173ea in process_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:184 #10 start_event_loop () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:547 #11 0x0000aa2c in captured_main (argv=<optimized out>, argc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3719 #12 main (argc=<optimized out>, argv=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3804 the sanity check tries to find the reinsert breakpoint from process B, but nothing is found. It is wrong, we need to search in process A, since we started step-over of a thread of process A. (gdb) p lwp->thread->entry.id $3 = {pid = 25120, lwp = 25131, tid = 0} (gdb) p current_thread->entry.id $4 = {pid = 25228, lwp = 25228, tid = 0} This patch switched current_thread to the thread we are doing step-over in finish_step_over. gdb/gdbserver: 2016-06-17 Yao Qi <yao.qi@linaro.org> * linux-low.c (maybe_hw_step): New function. (linux_resume_one_lwp_throw): Call maybe_hw_step. (finish_step_over): Switch current_thread to lwp temporarily, and assert has_reinsert_breakpoints returns true. (proceed_one_lwp): Call maybe_hw_step. * mem-break.c (has_reinsert_breakpoints): New function. * mem-break.h (has_reinsert_breakpoints): Declare.
2016-06-17gdb: new AndesTech NDS32 portYan-Ting Lin17-1/+2518
gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o. (HFILES_NO_SRCDIR): Add nds32-tdep.h. (ALLDEPFILES): Add nds32-tdep.c. * NEWS: Mention new NDS32 port. * configure.tgt: Add NDS32. * nds32-tdep.c: New file. * nds32-tdep.h: New file. * features/Makefile (XMLTOC): Add nds32.xml. * features/nds32-core.xml: New file. * features/nds32-fpu.xml: New file. * features/nds32-system.xml: New file. * features/nds32.c: New file (generated). * features/nds32.xml: New file. gdb/doc/ChangeLog: * gdb.texinfo (Standard Target Features): Document NDS32 features. (NDS32 Features): New Section. gdb/testsuite/ChangeLog: * gdb.base/float.exp: Add target check for nds32*-*-*. * gdb.xml/tdesc-regs.exp: Set core-regs for nds32*-*-*.
2016-06-17opcodes,gas: sparc: fix rdasr,wrasr,rdpr,wrpr,rdhpr,wrhpr insns.Jose E. Marchesi17-129/+613
This patch fixes and expands the definition of the read/write instructions for ancillary-state, privileged and hyperprivileged registers in opcodes. It also adds support for three new v9m hyperprivileged registers: %hmcdper, %hmcddfr and %hva_mask_nz. Finally, the patch expands existing tests (and adds several new ones) in order to cover all the read/write instructions in all its variants. opcodes/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (rdasr): New macro. (wrasr): Likewise. (rdpr): Likewise. (wrpr): Likewise. (rdhpr): Likewise. (wrhpr): Likewise. (sparc_opcodes): Use the macros above to fix and expand the definition of read/write instructions from/to asr/privileged/hyperprivileged instructions. * sparc-dis.c (v9_hpriv_reg_names): Add %hmcdper, %hmcddfr and %hva_mask_nz. Prefer softint_set and softint_clear over set_softint and clear_softint. (print_insn_sparc): Support %ver in Rd. gas/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (hpriv_reg_table): Add registers %hmcdper, %hmcddfr and %hva_mask_nz. (sparc_ip): New handling of asr/privileged/hyperprivileged registers, adapted to the new form of the sparc opcodes table. * testsuite/gas/sparc/rdasr.s: New file. * testsuite/gas/sparc/rdasr.d: Likewise. * testsuite/gas/sparc/wrasr.s: Likewise. * testsuite/gas/sparc/wrasr.d: Likewise. * testsuite/gas/sparc/sparc.exp (sparc_elf_setup): Add rdasr and wrasr tests. * testsuite/gas/sparc/rdpr.d: Use -Av9m, as some privileged registers require it. * testsuite/gas/sparc/wrpr.s: Complete to cover all privileged registers and write instruction modalities. * testsuite/gas/sparc/wrpr.d: Likewise. * testsuite/gas/sparc/rdhpr.s: Likewise for hyperprivileged registers. * testsuite/gas/sparc/rdhpr.d: Likewise. * testsuite/gas/sparc/wrhpr.s: Likewise. * testsuite/gas/sparc/wrhpr.d: Likewise.
2016-06-17opcodes,gas: adjust sparc insns and make GAS aware of itJose E. Marchesi9-192/+250
This patch marks the SPARC instructions in the opcodes table with their proper opcode architectures, and makes the assembler aware of them. This allows the assembler to properly realize when a new instruction needs a higher architecture (after v9b) and to react accordingly emitting an error message or bumping the architecture. It also expands architecture mismatch tests to cover architectures higher than v9b, and fixes a couple of minor bugs in the GAS testsuite. opcodes/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc_opcodes): Adjust instructions opcode architecture according to the hardware capabilities they require. (sparc_priv_regs): New table. (sparc_hpriv_regs): Likewise. (sparc_asr_regs): Likewise. (v9anotv9m): Define. gas/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_arch_table): adjust the GAS architectures to use the right opcode architecture. (sparc_md_end): Handle v9{c,d,e,v,m}. (sparc_ip): Fix some comments. * testsuite/gas/sparc/ldx_efsr.d: Fix the architecture of this instruction, which is v9d. * testsuite/gas/sparc/mwait.s: Remove the `rd %mwait,%g1' instruction from the test, as %mwait is not readable. * testsuite/gas/sparc/mwait.d: Likewise. * testsuite/gas/sparc/mism-1.s: Expand to check v9b and v9e mismatch architecture errors. * testsuite/gas/sparc/mism-2.s: New file.
2016-06-17gas: sparc: fix collision of registers and pseudo-ops.Jose E. Marchesi2-141/+264
The current sparc assembler breaks when the name of an ancillary-state register, privileged register or hyperprivileged register has a %-pseudo-operation name as a prefix. For example, %hmcdper and %hm(), or %hintp and %hi(). This patch fixes it by introducing a new table `perc_table' (for %-table) that contains an entry for every %name supported by the assembler, other than the general registers. This table is used to detect name collisions when the assembler tries to detect a %-pseudo-op. This patch also fixes a related bug, making sure that v9a_asr_table and hpriv_reg_table are sorted in reverse lexicographic order, as otherwise the search code may fail. gas/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (priv_reg_table): Use NULL instead of the empty string to mark the end of the array. (hpriv_reg_table): Likewise. (v9a_asr_table): Likewise. (cmp_reg_entry): Handle entries with NULL names. (F_POP_V9): Define. (F_POP_PCREL): Likewise. (F_POP_TLS_CALL): Likewise. (F_POP_POSTFIX): Likewise. (struct pop_entry): New type. (pop_table): New variable. (enum pop_entry_type): New type. (struct perc_entry): Likewise. (NUM_PERC_ENTRIES): Define. (perc_table): New variable. (cmp_perc_entry): New function. (md_begin): Sort hpriv_reg_table and v9a_asr_table, and initialize perc_table. (sparc_ip): Handle entries with NULL names in priv_reg_table, hpriv_reg_table and v9a_asr_table. Use perc_table to handle %-pseudo-ops.
2016-06-17bfd,opcodes: sparc: new opcode v9{c,d,e,v,m} architectures and bfd machine ↵Jose E. Marchesi12-16/+382
numbers. This patch adds support for the opcode architectures SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}. Note that for arches up to v9b (UltraSPARC III), the detection of the BFD machine type was based on the bits in the e_machine field of the ELF header. However, there are no more available bits in that field, so this patch takes the approach of using the hardware capabilities stored in the object attributes HWCAPS/HWCAPS2 in order to characterize the machine the object was built for. bfd/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v8plusc): Define. (bfd_mach_sparc_v9c): Likewise. (bfd_mach_sparc_v8plusd): Likewise. (bfd_mach_sparc_v9d): Likewise. (bfd_mach_sparc_v8pluse): Likewise. (bfd_mach_sparc_v9e): Likewise. (bfd_mach_sparc_v8plusv): Likewise (bfd_mach_sparc_v9v): Likewise. (bfd_mach_sparc_v8plusm): Likewise. (bfd_mach_sparc_v9m): Likewise. (bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m. (bfd_mach_sparc_64bit_p): Likewise. * bfd-in2.h: Regenerate. * cpu-sparc.c (arch_info_struct): Add entries for bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * elf32-sparc.c (elf32_sparc_final_write_processing): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise. include/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/sparc.h (enum sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D, SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and SPARC_OPCODE_ARCH_V9M. opcodes/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}. (compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * sparc-opc.c (MASK_V9C): Define. (MASK_V9D): Likewise. (MASK_V9E): Likewise. (MASK_V9V): Likewise. (MASK_V9M): Likewise. (v6): Add MASK_V9{C,D,E,V,M}. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9andleon): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Define. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
2016-06-17Automatic date update in version.inGDB Administrator1-1/+1
2016-06-16Add missing ChangeLog entriesH.J. Lu2-0/+13
commit bf52d7c72035679e6b3ab601133c56a4388f4dc9 Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Jun 15 10:35:38 2016 -0700 Don't check undefined symbol for IFUNC reloc
2016-06-16Don't check undefined symbol for IFUNC relocH.J. Lu5-18/+31
Since x86 elf_*_check_relocs is called after all symbols have been resolved, there is no need to check undefined symbols for relocations against IFUNC symbols. bfd/ * elf32-i386.c (elf_i386_check_relocs): Don't check undefined symbols for relocations against IFUNC symbols. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. ld/ * testsuite/ld-i386/i386.exp: Run pr19636-2e-nacl. * testsuite/ld-i386/pr19636-2e.d: Skip for NaCl targets. Remove .rel.plt section. * testsuite/ld-i386/pr19636-2e-nacl.d: New file.
2016-06-16bfd/s390: Fix DT_PLTRELSZ in presence of R_390_IRELATIVE.Marcin Kościelnicki3-6/+10
This was broken by 4ade44b727ee77adaa9c22719935d012e253a5e6, which changed the calculation to use the .rela.plt linker section instead of its output section - thus skipping .rela.iplt . Fix the calculations to include it. bfd/ChangeLog: * elf32-s390.c (elf_s390_finish_dynamic_sections): Include .rela.iplt in DT_PLTRELSZ. * elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise, for DT_PLTRELSZ and DT_RELASZ as well.
2016-06-16Skip relocations in non-loaded, non-alloced sectionsH.J. Lu3-28/+49
Don't do anything special with non-loaded, non-alloced sections. In particular, any relocs in such sections should not affect GOT and PLT reference counting (ie. we don't allow them to create GOT or PLT entries), there's no possibility or desire to optimize TLS relocs, and there's not much point in propagating relocs to shared libs that the dynamic linker won't relocate. * elf32-i386.c (elf_i386_check_relocs): Skip relocations in non-loaded, non-alloced sections. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
2016-06-15Check SEC_ALLOC before allocating dynamic relocationH.J. Lu3-28/+32
* elf32-i386.c (elf_i386_check_relocs): Check SEC_ALLOC before allocating dynamic relocation. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
2016-06-16Automatic date update in version.inGDB Administrator1-1/+1
2016-06-15X86: Add tests for static function pointerH.J. Lu24-6/+116
* testsuite/ld-i386/no-plt-check1a.S (check): Test static function pointer. * testsuite/ld-i386/no-plt-check1b.S (check): Likewise. * testsuite/ld-x86-64/no-plt-check1.S (check): Likewise. * testsuite/ld-i386/no-plt-extern1a.S (func_p): New. Static function pointer. * testsuite/ld-i386/no-plt-extern1b.S (func_p): Likewise. * testsuite/ld-x86-64/no-plt-extern1.S (func_p): Likewise. * testsuite/ld-i386/no-plt-1a.dd: Updated. * testsuite/ld-i386/no-plt-1b.dd: Likewise. * testsuite/ld-i386/no-plt-1c.dd: Likewise. * testsuite/ld-i386/no-plt-1d.dd: Likewise. * testsuite/ld-i386/no-plt-1e.dd: Likewise. * testsuite/ld-i386/no-plt-1f.dd: Likewise. * testsuite/ld-i386/no-plt-1g.dd: Likewise. * testsuite/ld-i386/no-plt-1h.dd: Likewise. * testsuite/ld-i386/no-plt-1i.dd: Likewise. * testsuite/ld-i386/no-plt-1j.dd: Likewise. * testsuite/ld-x86-64/no-plt-1a.dd: Likewise. * testsuite/ld-x86-64/no-plt-1b.dd: Likewise. * testsuite/ld-x86-64/no-plt-1c.dd: Likewise. * testsuite/ld-x86-64/no-plt-1d.dd: Likewise. * testsuite/ld-x86-64/no-plt-1e.dd: Likewise. * testsuite/ld-x86-64/no-plt-1f.dd: Likewise. * testsuite/ld-x86-64/no-plt-1g.dd: Likewise.
2016-06-15Fix simple gas testsuite failures.Nick Clifton35-543/+682
binutils* readelf.c (is_24bit_abs_reloc): Add support for R_FT32_20 reloc. gas * config/tc-ft32.c (md_assemble): Call dwarf2_emit_insn with the instruction size. * config/tc-mcore.c (md_assemble): Likewise. * config/tc-mn10200.c (md_assemble): Likewise. * config/tc-moxie.c (md_assemble): Likewise. * config/tc-pj.c (md_apply_fix): Handle BFD_RELOC_PJ_CODE_REL32. * testsuite/gas/all/gas.exp (diff1 test): Alpha sort list of exception targets. Add alpha, hppa, microblaze and rl78 to list of exceptions. (forward): Add microblaze to list of exceptions. (fwdexp): Add alpha to list of exceptions. (redef2): Add arm-epoc-pe and rl78 to list of exceptions. (redef3): Add rl78 and x86_64 cygwin to list of exceptions. (do_930509a): Alpha sort list of exception targets. Add h8300 and mn10200 to list of exceptions. (align2): Expect to fail for nds32. (cond): Add alpha and rl78 to list of exceptions. * testsuite/gas/all/none.d: Skip for ft32 and hppa. * testsuite/gas/all/string.d: Skip for tic4x. * testsuite/gas/alpha/alpha.exp: Note that the alpha-linuxecoff target does not support ELF. * testsuite/gas/arm/blx-bl-convert.dL Skip for the nto target. * testsuite/gas/cfi/cfi-alpha-2.d: All extended format names. * testsuite/gas/cfi/cfi.exp: Alpha sort list of targets. Skip SH tests for sh-pe and sh-rtemscoff targets. * testsuite/gas/elf/elf.exp (redef): Add rl78, xgate and vax to list of exceptions. (type): Run the noifunc version for alpha-freebsd and visium. * testsuite/gas/elf/warn-2.s: Do not expect to fail on the mcore, mn10200 or moxie targets. * testsuite/gas/ft32/insn.d: Update expected disassembly. * testsuite/gas/i386/i386.exp (x86-64-pcrel): Skip for cygwin targets. * testsuite/gas/lns/lns.exp (lns-common-1): No longer skip for mcore and rx targets. * testsuite/gas/macros/macros.exp (dot): Add exceptions for ns32k, rl78 and vax. (purge): Expect to fail on the ns32k and vax. * testsuite/gas/nds32/alu-2.d: Update expected disassembly. * testsuite/gas/nds32/ls.d: Likewise. * testsuite/gas/nds32/sys-reg.d: Likewise. * testsuite/gas/nds32/usr-spe-reg.d: Likewise. * testsuite/gas/pe/aligncomm-d.d: Skip for the sh. * testsuite/gas/pe/section-align-3.d: Likewise. * testsuite/gas/pe/section-exclude.d: Likewise. * testsuite/gas/ppc/test2xcoff32.d: Pass once all the required data has been seen. * testsuite/gas/ppc/textalign-xcoff-001.d: Fix up regexp to allow for variations in whitespace. * testsuite/gas/tilepro/t_constants.d: Pass once all the required data has been seen. * testsuite/gas/tilepro/t_constants.s (.safe_word): New macro. Installs a 32-bit value without generating warnings on 64-bit hosts. Use the new macro to replace the .word directives. opcodes * nds32-dis.c (nds32_parse_audio_ext): Change printing of integer constants to match expected behaviour. (nds32_parse_opcode): Likewise. Also for whitespace.
2016-06-15opcodes/arc: Fix extract for some add_s instructionsAndrew Burgess5-1/+22
The extract function used for some arc_s instructions was not implemented, and instead always returned 0. Fixed in this commit. opcodes/ChangeLog: * arc-opc.c (extract_rhv1): Extract value from insn. gas/ChangeLog: * testsuite/gas/arc/add_s.d: New file. * testsuite/gas/arc/add_s.s: New file.
2016-06-15Fix PR ld/20254Senthil Kumar Selvaraj5-2/+48
This patch fixes another edge case related to alignment property records - reloc offsets adjacent to property record offsets were not getting adjusted during relaxation. bfd/ PR ld/20254 * elf32-avr.c (elf32_avr_relax_delete_bytes): Adjust reloc offsets until reloc_toaddr. ld/ PR ld/20254 * testsuite/ld-avr/avr-prop-6.d: New test. * testsuite/ld-avr/avr-prop-6.s: New test.
2016-06-15Automatic date update in version.inGDB Administrator1-1/+1
2016-06-14opcode/gas: Fix incorrect dates on ChangeLog entriesGraham Markall2-6/+6
When committing three recent patches incorrect dates were left on the ChangeLog entries in gas/ChangeLog and opcodes/ChangeLog. Fixed in this commit.
2016-06-14Remove unneeded checks on type lengths.John Baldwin2-1/+5
Type lengths are unsigned, so they are always greater than or equal to zero. A check against the length of 'tgt_type' is retained to prevent dividing by zero. gdb/ChangeLog: * v850-tdep.c (v850_use_struct_convention): Trim type length checks.
2016-06-14Pass a NULL pointer as the last argument to find_pc_partial_function.John Baldwin2-1/+5
gdb/ChangeLog: * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
2016-06-14Initialize 'ra' to zero to avoid uninitialized use.John Baldwin2-0/+5
If the instruction in this case does not include an RA field, then 'ra' is used uninitialized. Use the same idiom used elsewhere in this file of initializing ra to zero before check for an RA field. gdb/ChangeLog: * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
2016-06-14Change the size field of MSP430_Opcode_Decoded to a plain integer.John Baldwin2-8/+6
The size field was defined as an instance of an enum, but existing code treats the size field as a plain integer containing a bit count. include/ChangeLog: * opcode/msp430-decode.h (MSP430_Size): Remove. (Msp430_Opcode_Decoded): Change type of size to int.
2016-06-14Use correct enum type for do_elf_stt_common.John Baldwin2-1/+5
binutils/ChangeLog: * objcopy.c (do_elf_stt_common): Use correct type.
2016-06-14Check R_*_IRELATIVE in x86 reloc_type_classH.J. Lu3-11/+23
elf_{i386|x86_64}_reloc_type_class should return reloc_class_ifunc for R_386_IRELATIVE/R_X86_64_IRELATIVE relocations. There is no need to check symbol type for STN_UNDEF symbol index. * elf32-i386.c (elf_i386_reloc_type_class): Check R_386_IRELATIVE. Don't check symbol type for STN_UNDEF symbol index. * elf64-x86-64.c (elf_x86_64_reloc_type_class): Check R_X86_64_IRELATIVE. Don't check symbol type for STN_UNDEF symbol index.
2016-06-14Fix elf_x86_64_reloc_type_classH.J. Lu1-8/+14
2016-06-14[ARC] Add ldbit for npsGraham Markall6-0/+133
This commit adds the ldbit instruction for the NPS-400. The ldbit instruction uses the same encoding as the ld instruction, but sets the ZZ field to 11 (which is a reserved setting), and sets the AA field to 1 or 2 for the x2 and x4 flags respectively.
2016-06-14[ARC] Add deep packet inspection instructions for npsGraham Markall7-50/+348
With the exception of ldbit, this commit adds implementations of all DPI instructions for the NPS-400. These instructions are: - hash / hash.p[0-3] - tr - utf8 - e4by - addf
2016-06-14[ARC] Add arithmetic and logic instructions for npsGraham Markall6-1/+582
This commit completes the implementation of arithmetic and logic instructions for the NPS-400. These instructions are: - calcbsd / calcbxd - calckey / calcxkey - mxb / imxb - addl, subl, orl, andl, xorl - andab / orab - lbdsize - bdlen - csms, csma, cbba - zncv - hofs
2016-06-14Fix compile time warning building gas for the NDS32 with gcc v6.1.1Nick Clifton2-1/+6
gas * config/tc-nds32.c (nds32_get_align): Avoid left shifting a signed constant.
2016-06-14Fix feature checks based on ARM architecture valueThomas Preud'homme2-17/+48
2016-06-14 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (using_thumb_only): Force review of arch check logic for new architecture. (using_thumb2): Try Tag_THUMB_ISA_use first and check for exact arch value then. Force review of arch check logic for new architecture. (arch_has_arm_nop): Update and fix arch check logic. Force review of that logic for new architecture. (arch_has_thumb2_nop): Remove. (elf32_arm_tls_relax): Use using_thumb2 instead of above function. (elf32_arm_final_link_relocate): Likewise but using thumb2.
2016-06-14Formatting fixes.Alan Modra10-185/+207
* ldbuildid.c: Formatting. * ldcref.c: Formatting. * ldctor.c: Formatting. * ldemul.c: Formatting. * ldexp.c: Formatting. * ldfile.c: Formatting. * ldlang.c: Formatting. * ldmain.c: Formatting. * ldwrite.c: Formatting.
2016-06-14Delete bfd_my_archive macroAlan Modra11-24/+39
Many more places use abfd->my_archive rather than bfd_my_archive (abfd), so let's make the code consistently use the first idiom. bfd/ * bfd-in.h (bfd_my_archive): Delete. * bfd-in2.h: Regenerate. binutils/ * ar.c: Expand uses of bfd_my_archive. * size.c: Likewise. ld/ * ldlang.c: Expand uses of bfd_my_archive. * ldmain.c: Likewise. * ldmisc.c: Likewise. * plugin.c: Likewise.
2016-06-14Set my_archive for thin archivesAlan Modra15-19/+66
LTO plugin support in plugin_maybe_claim wants to close the IR bfd after replacing it with the recompiled object, but can't do so for archive elements due to various pointers that access the archive bfd. Thin archives have the same problem. They too cannot have their element bfds closed. PR ld/20241 bfd/ * archive.c (open_nested_file): Set my_archive. * bfd.c (_bfd_default_error_handler <%B>): Exclude archive file name for thin archives. * bfdio.c (bfd_tell): Don't adjust origin for thin archives. (bfd_seek): Likewise. * bfdwin.c (bfd_get_file_window): Likewise. * cache.c (cache_bmmap): Likewise. (bfd_cache_lookup_worker): Don't look in my_archive for thin archives. * mach-o.c (bfd_mach_o_follow_dsym): Don't open my_archive for thin archives. * plugin.c (try_claim): Likewise. * xcofflink.c (xcoff_link_add_dynamic_symbols): Use import path of file within thin archive, not the archive. binutils/ * bucomm.c (bfd_get_archive_filename): Return file name within thin archive. ld/ * ldmain.c (add_archive_element): Just print file name of file within thin archives. * ldmisc.c (vfinfo): Likewise. * plugin.c (plugin_object_p): Open file within thin archives. (plugin_maybe_claim): Expand comment.
2016-06-14Automatic date update in version.inGDB Administrator1-1/+1
2016-06-13Add .got.plt to testsuite/script_test_2.tH.J. Lu2-0/+6
The .got.plt section must be placed right after the .got section. Otherwise, GOT offset will be wrong. PR gold/20246 * testsuite/script_test_2.t: Add .got.plt after .got.
2016-06-13Add the GOT base for GOT32 relocs against IFUNCH.J. Lu14-5/+260
Add the GOT base for R_386_GOT32/R_386_GOT32X relocations against IFUNC symbols if there is no base register and disallow them for PIC. bfd/ PR ld/20244 * elf32-i386.c (elf_i386_relocate_section): Add the .got.plt section address for R_386_GOT32/R_386_GOT32X relocations against IFUNC symbols if there is no base register and return error for PIC. ld/ PR ld/20244 * testsuite/ld-i386/i386.exp: Run pr20244-2a, pr20244-2b, pr20244-2c and pr20244-2d. * testsuite/ld-i386/no-plt.exp: Run pr20244-3a and pr20244-3b. * testsuite/ld-i386/pr20244-2.s: New file. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-2d.d: Likewise. * testsuite/ld-i386/pr20244-3a.c: Likewise. * testsuite/ld-i386/pr20244-3b.S: Likewise. * testsuite/ld-i386/pr20244-3c.S: Likewise. * testsuite/ld-i386/pr20244-3d.S: Likewise.
2016-06-13Add 2 i386 tests to call IFUNC functions via GOTH.J. Lu8-13/+209
bfd/ * elf32-i386.c (elf_i386_relocate_section): Simplify IFUNC GOT32 adjustment for static executables. ld/ 2016-06-13 H.J. Lu <hongjiu.lu@intel.com> * testsuite/ld-i386/i386.exp: Run ifunc-1a and ifunc-1b. * testsuite/ld-i386/ifunc-1a.c: New file. * testsuite/ld-i386/ifunc-1b.S: Likewise. * testsuite/ld-i386/ifunc-1c.S: Likewise. * testsuite/ld-i386/ifunc-1d.S: Likewise.
2016-06-13MIPS/GAS: Don't convert RELA JALR relocations on R6Maciej W. Rozycki13-5/+342
Revert an inadvertent change to make RELA JALR relocations section-relative on MIPS R6 targets made with commit 7361da2c952e ("Add support for MIPS R6."). There is no need to make this a special case and the comment introduced with the said change clearly indicates this was not intended. gas/ * config/tc-mips.c (mips_fix_adjustable): Don't convert RELA JALR relocations on R6. * testsuite/gas/mips/jal-svr4pic-local.d: New test. * testsuite/gas/mips/mips1@jal-svr4pic-local.d: New test. * testsuite/gas/mips/r3000@jal-svr4pic-local.d: New test. * testsuite/gas/mips/micromips@jal-svr4pic-local.d: New test. * testsuite/gas/mips/jal-svr4pic-local-n32.d: New test. * testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: New test. * testsuite/gas/mips/jal-svr4pic-local-n64.d: New test. * testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: New test. * testsuite/gas/mips/jal-svr4pic-local.s: New test source. * testsuite/gas/mips/jal-svr4pic-local-newabi.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-06-13MIPS/BFD: Update outdated comment about o32 R_MIPS_PC32 reloc supportMaciej W. Rozycki2-3/+7
Complement: commit b47468a6dbd1b54c44c2edc0f7db64a073d894ea Author: Catherine Moore <clm@redhat.com> Date: Mon May 6 15:25:45 2013 +0000 and the return of support for R_MIPS_PC32 there. bfd/ * elf32-mips.c (elf_mips_gnu_pcrel32): Update comment.
generated by cgit v1.1 at 2024-12-16 02:57:58 +0000