Age | Commit message (Collapse) | Author | Files | Lines |
|
sequences to be echo'd by gdb when using gdb_test.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise
|
|
argument.
* elf32-hppa.h: Corresponding change.
|
|
the minimal symbol table. All common symbols are "unsatisfied"
when -E is passed to the linker.
mentor-7462
|
|
|
|
to proper type of "unsigned int *".
|
|
correct type of "char *".
|
|
means the process is single threaded, so there's no need to add
it to the thread list. Handle case where multi-threaded process
reverts back to a single-threaded process.
|
|
* gdbserver/low-sparc.c: Likewise.
* gdbserver/low-sun3.c: Likewise.
* gdbserver/server.h: Remove error and fatal declaration.
* gdbserver/utils.c (error): Update to be compatable with recent
changes in defs.h.
(fatal): Likewise.
|
|
always calling alloca with a fixed size.
|
|
after the inferior gdb has started.
'cuz lynx may take a couple minutes to start the inferior gdb...
* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
after each command.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gdbvars.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.c++/demangle.exp: Likewise.
* gdb.c++/inherit.exp: Likewise.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise.
Just in case we can't get a version of expect that sets the tty modes
right on lynx to avoid this problem.
|
|
compatible with Unixware 1.x and Unixware 2.x, and probably other
i386 svr4 versions as well.
|
|
test if we can't handle IO to/from the inferior.
|
|
started after sending a "run" command to gdb.
|
|
|
|
only depend on gdb's expression code, not the chill runtime.
|
|
can have gdb print them rather than depending on the program
to print them.
* gdb.base/return.exp: Corresponding changes.
|
|
* gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from
the inferior.
|
|
big- and little-endian variants, list all of them, instead of the
now-nonexistant armpe[i]_vec.
|
|
started after sending a "run" command to gdb.
(text_next_with_recursion): Don't check the output from the
program's printf statement. Instead just make sure the program
exited.
|
|
$noargs conditionals.
|
|
|
|
a macro name in this file.
|
|
of structure member arrays to match gdb/valops.c:value_addr change.
|
|
correctly map floating point registers numbers.
|
|
correctly map floating point registers numbers.
* dwarfread.c (locval, new_symbol): Handle variables that are
optimized out.
* mdebugread.c: Replace all uses of builtin_type_* with
mdebug_type_*. Define and initialize mdebug_type_*.
* serial.h (serial_close): Add additional argument `really_close'.
(SERIAL_CLOSE): Update serial_close call accordingly.
(SERIAL_UN_FDOPEN): Use serial_close to handle refcnt properly.
* serial.c (serial_close): Handle `really_close'.
* serial.h (scb_base): Moved to serial.c, made static.
* valops.c (value_addr): Don't coerce arrays.
(typecmp): Coerce arrays instead of calling value_addr if necessary.
|
|
(elf_fake_sections): Set sh_addr based on lma, not vma.
PR 7478.
|
|
* gdb.texinfo (convenience variables): Document $_exitcode.
(quit): Document optional expression to use as exit code.
|
|
* infrun.c (wait_for_inferior): Set the convenience variable
$_exitcode to the termination code of the inferior.
* top.c (quit_command): Accept optional expression to use
as parameter to exit().
|
|
(LITTLE_OUTPUT_FORMAT, BIG_OUTPUT_FORMAT): Define.
|
|
* config/tc-arm.h (BYTE_ORDER): Delete.
(TARGET_FORMAT): Provide value for OBJ_COFF and TE_PE.
(ARM_BI_ENDIAN): Define if OBJ_COFF and TE_PE.
* config/tc-arm.c (byte_order): Delete.
(md_number_to_chars): Reference target_big_endian, not byte_order.
(md_chars_to_number): Likewise.
(md_longopts): Add -EB/-EL if ARM_BI_ENDIAN.
(md_parse_options): Recognize -EB/-EL.
(md_show_usage): List -EB/-EL.
|
|
* configure.in (armpe_vec, armpei_vec): Add bi-endian support.
* configure: "regenerated".
* pe-arm.c (TARGET_LITTLE_SYM, TARGET_BIG_SYM): Replaces TARGET_SYM.
(TARGET_LITTLE_NAME, TARGET_BIG_NAME): Replaces TARGET_NAME.
* pei-arm.c (TARGET_LITTLE_SYM, TARGET_BIG_SYM): Replaces TARGET_SYM.
(TARGET_LITTLE_NAME, TARGET_BIG_NAME): Replaces TARGET_NAME.
* targets.c (armpe_vec, armpei_vec): Deleted.
(armpe_little_vec, armpe_big_vec, armpei_little_vec, armpei_big_vec):
Added.
* config/arm-pe.mt (DEFAULT_VECTOR): Default is armpe_little_vec.
(SELECT_VECS): Add bi-endian support.
|
|
do conversion if necessary.
|
|
upper case letter.
(whatcond): Likewise.
PR 7281.
|
|
Renamed all uses.
(insert): Pass a size of 2, not 4.
(build_relax): Remove unused len variable.
(md_show_usage): Mention -little option.
(md_convert_frag): Add segT argument. Rewrite to generate relocs
rather than to generate complete instructions here.
(md_apply_fix): Adjust and clarify R_SH_PCRELIMM8BY4 case for
changes in insert and md_pcrel_from. Add cases for R_SH_PCDISP
and R_SH_PCDISP8BY2.
(md_pcrel_from): Don't subtract 1, add 2.
(tc_coff_fix2rtype): Remove.
(sh_coff_reloc_mangle): New function.
* config/tc-sh.h (TC_COFF_FIX2RTYPE): Just return fx_r_type.
(sh_relax): Declare.
(TC_COUNT_RELOC): If relaxing, count PC relative relocs.
(TC_RELOC_MANGLE): Define.
(sh_coff_reloc_mangle): Declare.
(tc_coff_sizemachdep): Declare.
* tc.h (md_convert_frag): Add segT parameter to non BFD_ASSEMBLER
declaration.
* write.c (cvt_frag_to_fill): Add sec argument to non
BFD_ASSEMBLER version. Pass it to md_convert_frag.
(write_object_file): Pass SEG_TEXT to cvs_frag_to_fill.
* config/obj-coff.c (do_relocs_for): Pass segment info to
TC_RELOC_MANGLE.
(fixup_mdeps): Pass segment type to md_convert_frag.
* config/tc-a29k.c (md_convert_frag): Add segT argument.
* config/tc-h8300.c (md_convert_frag): Likewise.
* config/tc-h8500.c (md_convert_frag): Likewise.
* config/tc-i386.c (md_convert_frag): Likewise.
* config/tc-i860.c (md_convert_frag): Likewise.
* config/tc-i960.c (md_convert_frag): Likewise.
* config/tc-m68k.c (md_convert_frag): Likewise.
* config/tc-m88k.h (md_convert_frag): Likewise.
* config/tc-ns32k.c (md_convert_frag): Likewise.
* config/tc-rce.c (md_convert_frag): Likewise.
* config/tc-tahoe.c (md_convert_frag): Likewise.
* config/tc-vax.c (md_convert_frag): Likewise.
* config/tc-w65.c (md_convert_frag): Likewise.
* config/tc-z8k.c (md_convert_frag): Likewise.
* config/tc-h8300.h (TC_RELOC_MANGLE): Add segment argument.
* config/tc-h8500.h (TC_RELOC_MANGLE): Likewise.
* config/tc-rce.h (TC_RELOC_MANGLE): Likewise.
* config/tc-w65.h (TC_RELOC_MANGLE): Likewise.
* config/tc-z8k.h (TC_RELOC_MANGLE): Likewise.
|
|
|
|
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
|
|
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
|
|
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
|
|
into a new output section.
|
|
(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
Add textaddr, textsize, and stabs parameters.
* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
Add text_addr and text_size fields.
(DBX_TEXT_SECT): Don't define.
(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
* coffread.c: Include <ctype.h>.
(struct coff_symfile_info): Remove stabsect and stabindexsect
fields. Add textaddr, textsize, and stabsects fields.
(coff_locate_sections): Record the address of the .text section,
and total the sizes of all sections with names beginning with
".text". Don't bother to record a .stab.index section (COFF
doesn't use them). Make a linked list of all sections with names
beginning with ".stab".
(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
new parameters.
* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
(elfstab_build_psymtabs): Likewise.
(stabsect_build_psymtabs): Likewise.
(symbuf_sections, symbuf_left, symbuf_read): New static variables.
(fill_symbuf): If symbuf_sections is not NULL, read symbols from
multiple sections.
(coffstab_build_psymtabs): Remove staboffset and stabsize
parameters. Add textaddr, textsize, and stabsects parameters.
Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
multiple stabs sections.
* os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
PR 7241.
|
|
field.
|
|
cases.
|
|
for OSF/1-3.x procfs support.
|
|
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
|
|
|
|
|
|
* config/tc-sparc.h (sparc_pic_code): Always declare, not just
when OBJ_ELF.
(TC_RELOC_RTSYM_LOC_FIXUP): Define when OBJ_AOUT.
(tc_fix_adjustable): New definition for OBJ_AOUT.
* config/tc-sparc.c (sparc_pic_code): Always define, not just when
OBJ_ELF.
(md_apply_fix): Adjust reloc addend for OBJ_AOUT and PIC. In
BFD_RELOC_32_PCREL_S2 case, don't increment val for an external
symbol when PIC.
(tc_gen_reloc): Generate different PIC relocs when OBJ_AOUT, as
well as when OBJ_ELF.
(md_shortopts): If OBJ_AOUT, include `k'.
(md_parse_option): If OBJ_AOUT, handle 'k'.
(md_show_usage): Mention -k if OBJ_AOUT, and -KPIC if OBJ_ELF.
(md_pcrel_from): Don't add in size for an external symbol when
PIC.
|
|
(KEEPITTYPE): Remove.
(NAME(aout,reloc_type_lookup)): Add cases to the
extended reloc type switch: SPARC_GOT10, SPARC_GOT13, SPARC_GOT22,
SPARC_PC10, SPARC_PC22, SPARC_WPLT30.
(NAME(aout,swap_std_reloc_out)): Don't bother to use stoi when
retrieving KEEPIT value.
(NAME(aout,swap_ext_reloc_out)): Likewise. Also, only add in
output section VMA for section symbols, and check BSF_SECTION_SYM
to control whether to set r_extern to 1.
|
|
pathnames of makefile fragments.
* configure: regenerated.
|
|
followed by 16 ascii characters, similar to Emacs' hexl-mode,
to make it easier to read.
|