| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ld/
* testsuite/ld-elf/compress.exp: Don't print to stdout for all
"readelf -w".
|
|
gas/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (parse_opcode_flags): Ignore implicit flags.
include/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
Anton Kolesov <anton.kolesov@synopsys.com>
* opcode/arc.h (insn_class_t): Add ENTER, LEAVE, POP, PUSH, BBIT0,
BBIT1, BI, BIH, BRCC, EI, JLI, and SUB instruction classes.
(flag_class_t): Add F_CLASS_WB, F_CLASS_ZZ, and F_CLASS_IMPLICIT
flag classes.
opcode/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (arc_disassemble_info): New structure.
(init_arc_disasm_info): New function.
(find_format_from_table): Ignore implicit flags.
(find_format): Update dissassembler private data.
(print_flags): Likewise.
(print_insn_arc): Likewise.
(arc_opcode_to_insn_type): Consider the new added instruction
classes.
(arcAnalyzeInstr): Remove.
(arc_insn_decode): New function.
* arc-dis.h (arc_ldst_writeback_mode): New enum.
(arc_ldst_data_size): Likewise.
(arc_condition_code): Likewise.
(arc_operand_kind): Likewise.
(arc_insn_kind): New struct.
(arc_instruction): Likewise.
(arc_insn_decode): Declare function.
(ARC_Debugger_OperandType): Deleted.
(Flow): Likewise.
(NullifyMode): Likewise.
(allOperandsSize): Likewise.
(arcDisState): Likewise.
(arcAnalyzeInstr): Likewise.
* arc-dis.c (arc_opcode_to_insn_type): Handle newly introduced
insn_class_t enums.
* arc-opc.c (F_SIZED): New define.
(C_CC_EQ, C_CC_GE, C_CC_GT, C_CC_HI, C_CC_HS): Likewise.
(C_CC_LE, C_CC_LO, C_CC_LS, C_CC_LT, C_CC_NE): Likewise.
(C_CC_NE, C_AA_AB, C_AA_AW, C_ZZ_D, C_ZZ_H, C_ZZ_B): Likewise.
(arc_flag_classes): Add F_CLASS_COND/F_CLASS_IMPLICIT flags.
* opcodes/arc-tbl.h: Update instructions to include new
F_CLASS_IMPLICIT flags.
(bbit0, lp): Change class.
(bbit1, bi, bih, br*, ei_s, jli_s): Likewsie
|
|
This patch addresses BZ 21005, which is gdb failing to recognize an rdrand
instruction.
It enables support for both rdrand and rdseed and handles extended register
addressing (R8~R15) for 16-bit, 32-bit and 64-bit.
gdb/ChangeLog
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* NEWS: Mention support for record/replay of Intel 64 rdrand and
rdseed instructions.
i386-tdep.c (i386_process_record): Handle Intel 64 rdrand and rseed.
gdb/testsuite/ChangeLog:
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Include insn-reverse-x86.c.
* gdb.reverse/insn-reverse-x86.c: New file.
|
|
gdb/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
Provide and use sparc32 and sparc64 target description XML files.
* features/sparc/sparc32-cp0.xml, features/sparc/sparc32-cpu.xml,
features/sparc/sparc32-fpu.xml: New files for sparc 32-bit.
* features/sparc/sparc64-cp0.xml, features/sparc/sparc64-cpu.xml,
features/sparc/sparc64-fpu.xml: New files for sparc 64-bit.
* features/sparc/sparc32-solaris.xml: New file.
* features/sparc/sparc64-solaris.xml: New file.
* features/sparc/sparc32-solaris.c: Generated.
* features/sparc/sparc64-solaris.c: Generated.
* sparc-tdep.h: Account for differences in target descriptions.
* sparc-tdep.c (sparc32_register_name): Use target provided registers.
(sparc32_register_type): Use target provided registers.
(validate_tdesc_registers): New function.
(sparc32_gdbarch_init): Use tdesc_has_registers.
Set pseudoregister functions.
* sparc64-tdep.c (sparc64_register_name): Use target provided registers.
(sparc64_register_type): Use target provided registers.
(sparc64_init_abi): Set pseudoregister functions.
gdb/doc/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
* gdb.texinfo: (Standard Target Features): Document SPARC features.
(Sparc Features): New node.
gdb/testsuite/ChangeLog:
2017-02-06 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20936
* gdb.xml/tdesc-regs.exp: Provide sparc core registers for the tests.
|
|
|
|
|
|
While looking into PR rust/21097, I found that ptype of a
single-element enum in Rust did not always format the result properly.
In particular, it would leave out the members of a tuple struct.
Further testing showed that it also did the wrong thing for ordinary
struct members as well.
This patch fixes these problems. I'm marking it as being associated
with the PR, since that is where the discovery was made; but this
doesn't actually fix that PR (which I think ultimately is due to a
Rust compiler bug).
Built and regtested on x86-64 Fedora 25, using the system Rust
compiler. I'm checking this in.
2017-02-03 Tom Tromey <tom@tromey.com>
PR rust/21097:
* rust-lang.c (rust_print_type) <TYPE_CODE_UNION>: Handle enums
with a single member.
2017-02-03 Tom Tromey <tom@tromey.com>
PR rust/21097:
* gdb.rust/simple.exp: Add new tests.
|
|
|
|
- The interp->data field disappears, since we can put data in the
interpreter directly now. The "init" method remains in place, but
it now returns void.
- A few places check if the interpreter method is NULL before calling
it, and also check whether the method returns true/false. For some
of those methods, all current implementations always return true.
In those cases, this commit makes the C++-fied method return void
instead and cleans up the callers.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2017-02-03 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp_base::cli_interp_base)
(cli_interp_base::~cli_interp_base): New.
(cli_interp): New struct.
(as_cli_interp): Cast the interp itself to cli_interp.
(cli_interpreter_pre_command_loop): Rename to ...
(cli_interp_base::pre_command_loop): ... this. Remove 'self'
parameter.
(cli_interpreter_init): Rename to ...
(cli_interp::init): ... this. Remove 'self' parameter. Use
boolean. Make extern.
(cli_interpreter_resume): Rename to ...
(cli_interp::resume): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_suspend): Rename to ...
(cli_interp::suspend): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_exec): Rename to ...
(cli_interp::exec): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_supports_command_editing): Rename to ...
(cli_interp_base::supports_command_editing): ... this. Remove
'interp' parameter. Make extern.
(cli_ui_out): Rename to ...
(cli_interp::interp_ui_out): ... this. Remove 'interp' parameter.
Make extern.
(cli_set_logging): Rename to ...
(cli_interp_base::set_logging): ... this. Remove 'interp'
parameter. Make extern.
(cli_interp_procs): Delete.
(cli_interp_factory): Adjust to use "new".
* cli/cli-interp.h: Include "interps.h".
(struct cli_interp_base): New struct.
* interps.c (struct interp): Delete. Fields moved to interps.h.
(interp_new): Delete.
(interp::interp, interp::~interp): New.
(interp_set): Use bool, and return void. Assume the interpreter
has suspend, init and resume methods, and that the all return
void.
(set_top_level_interpreter): interp_set returns void.
(interp_ui_out): Adapt.
(current_interp_set_logging): Adapt.
(interp_data): Delete.
(interp_pre_command_loop, interp_supports_command_editing): Adapt.
(interp_exec): Adapt.
(top_level_interpreter_data): Delete.
* interps.h (interp_init_ftype, interp_resume_ftype)
(interp_suspend_ftype, interp_exec_ftype)
(interp_pre_command_loop_ftype, interp_ui_out_ftype): Delete.
(class interp): New.
(interp_new): Delete.
(interp_set): Now returns void. Use bool.
(interp_data, top_level_interpreter_data): Delete.
* mi/mi-common.h: Include interps.h.
(class mi_interp): Inherit from interp. Define a ctor. Declare
init, resume, suspect, exec, interp_ui_out, set_logging and
pre_command_loop methods.
* mi/mi-interp.c (as_mi_interp): Cast the interp itself.
(mi_interpreter_init): Rename to ...
(mi_interp::init): ... this. Remove the 'interp' parameter, use
bool, return void and make extern. Adjust.
(mi_interpreter_resume): ... Rename to ...
(mi_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_suspend): ... Rename to ...
(mi_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_exec): ... Rename to ...
(mi_interp::exec): ... this. Remove the 'data' parameter and make
extern. Adjust.
(mi_interpreter_pre_command_loop): ... Rename to ...
(mi_interp::pre_command_loop): ... this. Remove the 'self'
parameter and make extern.
(mi_on_normal_stop_1): Adjust.
(mi_ui_out): Rename to ...
(mi_interp::interp_ui_out): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_set_logging): Rename to ...
(mi_interp::set_logging): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_interp_procs): Delete.
(mi_interp_factory): Adjust to use 'new'.
* mi/mi-main.c (mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_execute_command, mi_load_progress):
Adjust.
* tui/tui-interp.c (tui_interp): New class.
(as_tui_interp): Return a tui_interp pointer.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed): Adjust
to use interp::interp_ui_out.
(tui_init): Rename to ...
(tui_interp::init): ... this. Remove the 'self' parameter, use
bool, return void and make extern. Adjust.
(tui_resume): Rename to ...
(tui_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_suspend): Rename to ...
(tui_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_ui_out): Rename to ...
(tui_interp::interp_ui_out): ... this. Remove the 'self'
parameter, and make extern. Adjust.
(tui_exec): Rename to ...
(tui_interp::exec): ... this. Remove the 'data' parameter and
make extern.
(tui_interp_procs): Delete.
(tui_interp_factory): Use "new".
|
|
* powerpc.cc (Powerpc_relobj::make_toc_relative): Don't crash
when no .toc section exists.
|
|
PR 21096
bfd * coffcode.h (coff_write_object_contents): Enlarge size of
s_name_buf in order to avoid compile time warning about possible
integer truncation.
* elf32-nds32.c (nds32_elf_ex9_import_table): Mask off lower
32-bits of insn value before printing into buffer.
opcodes * aarch64-opc.c (print_register_list): Ensure that the register
list index will fir into the tb buffer.
(print_register_offset_address): Likewise.
* tic6x-dis.c (print_insn_tic6x): Increase size of func_unit_buf.
|
|
This changes various functions in the Rust code to use a bool rather
than an int when a boolean is intended.
2017-02-02 Tom Tromey <tom@tromey.com>
* rust-exp.y (ends_raw_string, space_then_number)
(rust_identifier_start_p): Return bool.
* rust-lang.c (rust_tuple_type_p, rust_underscore_fields)
(rust_tuple_struct_type_p, rust_tuple_variant_type_p)
(rust_slice_type_p, rust_range_type_p, rust_u8_type_p)
(rust_chartype_p): Return bool.
(val_print_struct, rust_print_struct_def, rust_print_type):
Update.
* rust-lang.h (rust_tuple_type_p, rust_tuple_struct_type_p):
Return bool.
|
|
I noticed a few spots in rust-lang.c had incorrect indentation. This
patch fixes this.
2017-02-02 Tom Tromey <tom@tromey.com>
* rust-lang.c: Reindent.
|
|
This changes a couple of spots in the Rust support to use std::string.
In one spot this removes some manual memory management; in the other
spot this allows the removal of a call to xstrdup.
2017-02-02 Tom Tromey <tom@tromey.com>
* rust-lang.h (rust_crate_for_block): Update.
* rust-lang.c (rust_crate_for_block): Return std::string.
(rust_get_disr_info): Use std:;string, not
gdb::unique_xmalloc_ptr.
* rust-exp.y (crate_name): Update.
|
|
|
|
The "maintenance selftest" command is printing odd bits of stray
instructions like:
~~~
brkwarning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default HS settings.
brkmov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0breakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakM3.L = 0xffff;/* ( -1) M3=0x0xffff(65535) */break 8break 8warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default cris:common_v10_v32 settings.
~~~
etc. Those appear because here:
class gdb_disassembler_test : public gdb_disassembler
{
public:
const bool verbose = false;
explicit gdb_disassembler_test (struct gdbarch *gdbarch,
const gdb_byte *insn,
size_t len)
: gdb_disassembler (gdbarch,
(verbose ? gdb_stdout : &null_stream),
gdb_disassembler_test::read_memory),
specifically in this line:
(verbose ? gdb_stdout : &null_stream),
"verbose" has not been initialized yet, because the order of
initialization is base classes first, then members. I.e. "verbose" is
only initialized after the base constructor is called. Since the
gdb_disassembler_test object is created on the stack, "verbose" has
garbage at that point. If the gargage is non-zero, then we end up
with the gdb_disassembler_test's stream incorrectly pointing to
gdb_stdout.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm-selftests.c (print_one_insn_test): Move the "verbose"
field out of gdb_disassembler_test and make it static.
|
|
The "maintenance selftest" command is printing odd bits of stray
instructions like:
~~~
brkwarning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default HS settings.
brkmov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0mov r0, #0breakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakbreakM3.L = 0xffff;/* ( -1) M3=0x0xffff(65535) */break 8break 8warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration
of GDB. Attempting to continue with the default cris:common_v10_v32 settings.
~~~
etc. Those appear because here:
class gdb_disassembler_test : public gdb_disassembler
{
public:
const bool verbose = false;
explicit gdb_disassembler_test (struct gdbarch *gdbarch,
const gdb_byte *insn,
size_t len)
: gdb_disassembler (gdbarch,
(verbose ? gdb_stdout : &null_stream),
gdb_disassembler_test::read_memory),
specifically in this line:
(verbose ? gdb_stdout : &null_stream),
"verbose" has not been initialized yet, because the order of
initialization is base classes first, then members. I.e. "verbose" is
only initialized after the base constructor is called. Since the
gdb_disassembler_test object is created on the stack, "verbose" has
garbage at that point. If the gargage is non-zero, then we end up
with the gdb_disassembler_test's stream incorrectly pointing to
gdb_stdout.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm-selftests.c (print_one_insn_test): Move the "verbose"
field out of gdb_disassembler_test and make it static.
|
|
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* mi/mi-common.h (struct mi_interp): Delete the mi2_interp,
mi1_interp and mi_interp fields.
|
|
Ensure all local symbols precede external symbols in the dynamic symbol
table.
No local symbols are expected to make it to the dynamic symbol table
except for section symbols already taken care of, so this is really a
safeguard only against a potential BFD bug otherwise not so harmful,
which may become a grave one due to a symbol table sorting requirement
violation (see PR ld/20828 for an example). This means however that no
test suite coverage is possible for this change as code introduced here
is not normally expected to trigger.
Logically split then the part of the dynamic symbol table which is not
global offset table mapped, into a local area at the beginning and an
external area following. By the time `mips_elf_sort_hash_table' is
called we have the number of local dynamic symbol table entries (section
and non-section) already counted in `local_dynsymcount', so use it to
offset the external area from the beginning.
bfd/
* elfxx-mips.c (mips_elf_hash_sort_data): Add
`max_local_dynindx'.
(mips_elf_sort_hash_table): Handle it.
(mips_elf_sort_hash_table_f) <GGA_NONE>: For forced local
symbols bump up `max_local_dynindx' rather than
`max_non_got_dynindx'.
|
|
Use the `bfd_size_type' data type for dynamic symbol table indices in
the MIPS backend, in line with generic code and removing the need to use
a cast.
bfd/
* elfxx-mips.c (mips_elf_hash_sort_data): Convert the
`min_got_dynindx', `max_unref_got_dynindx' and
`max_non_got_dynindx' members to the `bfd_size_type' data type.
(mips_elf_sort_hash_table): Adjust accordingly.
|
|
Make all hash table references throughout `mips_elf_sort_hash_table' use
`htab', simplifying code and improving readability.
bfd/
* elfxx-mips.c (mips_elf_sort_hash_table): Use `htab' throughout
to access the hash table.
|
|
Move the assertion on non-NULL `htab' in `mips_elf_sort_hash_table' to
the beginning, before the pointer is dereferenced (`mips_elf_hash_table
(info)' and `elf_hash_table (info)' both point to the same memory
location, differently typed).
bfd/
* elfxx-mips.c (mips_elf_sort_hash_table): Move assertion on
non-NULL `htab' to the beginning.
|
|
ld/
* testsuite/ld-cris/tls-err-20x.d: Fix a typo, s/n/\n/.
|
|
Match `$check_ld(source)' against "regex" rather than "regexp" in
reporting, correcting test framework diagnostics, e.g.:
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
failed with: <tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'>, no expected output
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
PASS: MIPS undefined reference
(current) vs:
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
failed with: <tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'>, expected: <\A[^\n]*\.o: In function `foo':\n\(\.text\+0x0\): undefined reference to `bar'\Z>
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
PASS: MIPS undefined reference
(corrected). No functional change.
ld/
* ld/testsuite/lib/ld-lib.exp (run_dump_test): Fix a typo,
s/regexp/regex/.
|
|
bfd/
* elflink.c (elf_gc_sweep): Wrap overlong line.
|
|
Include the detailed MIPS option description in the man page along with
other target descriptions and complementing the terse list earlier on.
gas/
* doc/as.texinfo (Overview): Select MIPS options for man page
inclusion.
|
|
This patch gets rid of this hack in mi_set_logging:
/* The tee created already is based on gdb_stdout, which for MI
is a console and so we end up in an infinite loop of console
writing to ui_file writing to console etc. So discard the
existing tee (it hasn't been used yet, and MI won't ever use
it), and create one based on raw_stdout instead. */
By pushing down responsibility for the tee creation to the
interpreter. I.e., pushing the CLI bits out of handle_redirections
down to the CLI interpreter's set_logging_proc method.
This fixes a few leaks that I spotted, and then confirmed with
"valgrind --leak-check=full":
[...]
==21429== 56 (32 direct, 24 indirect) bytes in 1 blocks are definitely lost in loss record 30,243 of 34,980
==21429== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==21429== by 0x62D9A9: mi_set_logging(interp*, int, ui_file*, ui_file*) (mi-interp.c:1395)
==21429== by 0x810B8A: current_interp_set_logging(int, ui_file*, ui_file*) (interps.c:360)
==21429== by 0x61C537: handle_redirections(int) (cli-logging.c:162)
==21429== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==21429== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==21429== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==21429== by 0x8DB790: execute_command(char*, int) (top.c:674)
==21429== by 0x632AE6: mi_execute_cli_command(char const*, int, char const*) (mi-main.c:2343)
==21429== by 0x6329BA: mi_cmd_execute(mi_parse*) (mi-main.c:2306)
==21429== by 0x631E19: captured_mi_execute_command(ui_out*, mi_parse*) (mi-main.c:1998)
==21429== by 0x632389: mi_execute_command(char const*, int) (mi-main.c:2163)
==21429==
[...]
==26635== 24 bytes in 1 blocks are definitely lost in loss record 20,740 of 34,995
==26635== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334)
==26635== by 0x61C355: handle_redirections(int) (cli-logging.c:131)
==26635== by 0x61C6EC: set_logging_on(char*, int) (cli-logging.c:190)
==26635== by 0x6163BE: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:105)
==26635== by 0x6193C1: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1913)
==26635== by 0x8DB7BC: execute_command(char*, int) (top.c:674)
==26635== by 0x7B9132: command_handler(char*) (event-top.c:590)
==26635== by 0x7B94F7: command_line_handler(char*) (event-top.c:780)
==26635== by 0x7B8ABB: gdb_rl_callback_handler(char*) (event-top.c:213)
==26635== by 0x933CE9: rl_callback_read_char (callback.c:220)
==26635== by 0x7B89ED: gdb_rl_callback_read_char_wrapper_noexcept() (event-top.c:175)
==26635== by 0x7B8A49: gdb_rl_callback_read_char_wrapper(void*) (event-top.c:192)
One is fixed by transfering ownership of the log file to the tee. In
pseudo-patch, since the code was moved at the same time:
- out = new tee_file (curr_output, false, logfile.get (), false);
+ out = new tee_file (curr_output, false, logfile.get (), true);
The other is this bit in mi_set_logging:
else
{
+ delete mi->raw_stdout;
I tried to split the leak fixes to a smaller preparatory patch, but
that was difficult exactly because of the tee hack in
handle_redirections -> mi_set_logging.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (struct saved_output_files, saved_output):
Moved from cli/cli-logging.c.
(cli_set_logging): New function.
(cli_interp_procs): Install cli_set_logging.
* cli/cli-interp.h (make_logging_output, cli_set_logging):
Declare.
* cli/cli-logging.c (struct saved_output_files, saved_output):
Moved to cli/cli-interp.c.
(pop_output_files): Don't save outputs here.
(make_logging_output): New function.
(handle_redirections): Don't build tee nor save previous outputs
here.
* interps.c (current_interp_set_logging): Change prototype.
Assume there's always a set_logging_proc method installed.
* interps.h (interp_set_logging_ftype): Change prototype.
(current_interp_set_logging): Change prototype and adjust comment.
* mi/mi-interp.c (mi_set_logging): Change protototype. Adjust to
use make_logging_output.
* tui/tui-interp.c (tui_interp_procs): Install cli_set_logging.
|
|
This commit fixes a "-gdb-set logging redirect on" crash by not
handling "logging redirect on" on the fly.
Previous discussion here:
https://sourceware.org/ml/gdb-patches/2017-01/msg00467.html
Code for handling "logging redirect on" on the fly was added here:
https://sourceware.org/ml/gdb-patches/2010-08/msg00202.html
Meanwhile, MI gained support for logging, but flipping redirect "on"
on the fly was not considered. The result is that this sequence of
commands crashes GDB:
-gdb-set logging on
-gdb-set logging redirect on
Program received signal SIGSEGV, Segmentation fault.
0x00000000008dd7bc in gdb_flush (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
194 file->to_flush (file);
(top-gdb) bt
#0 0x00000000008dd7bc in gdb_flush(ui_file*) (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95
#1 0x00000000007b5f34 in gdb_wait_for_event(int) (block=0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:752
#2 0x00000000007b52b6 in gdb_do_one_event() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:322
#3 0x00000000007b5362 in start_event_loop() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:371
#4 0x000000000082704a in captured_command_loop(void*) (data=0x0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:325
#5 0x00000000007b8d7c in catch_errors(int (*)(void*), void*, char*, return_mask) (func=0x827008 <captured_command_loop(void*)>, func_args=0x0, errstring=0x11dee51 "", mask=RETURN_MASK_ALL) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/exceptions.c:236
#6 0x000000000082839b in captured_main(void*) (data=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1148
During symbol reading, cannot get low and high bounds for subprogram DIE at 24065.
#7 0x00000000008283c4 in gdb_main(captured_main_args*) (args=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1158
#8 0x0000000000412d4d in main(int, char**) (argc=4, argv=0x7fffffffd928) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/gdb.c:32
The handling of redirect on the fly is not really a use case we need
to handle, IMO. Its inconsistent (other "set logging foo" commands
aren't handled on the fly), and complicates the code significantly.
Instead of complicating it further for MI, go back to the original
idea of warning, only:
https://sourceware.org/ml/gdb-patches/2010-08/msg00083.html
New test included.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* cli/cli-logging.c (maybe_warn_already_logging): New factored out
from ...
(set_logging_overwrite): ... here.
(logging_no_redirect_file): Delete.
(set_logging_redirect): Don't handle redirection on the fly.
Instead warn that "logging off" / "logging on" is necessary.
(pop_output_files): Delete references to logging_no_redirect_file.
(show_logging_command): Always speak in terms of what will happen
once logging is reenabled.
gdb/testsuite/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-logging.exp: Add "redirect while already logging"
tests.
|
|
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.h (gdb_pretty_print_disassembler): Tweak intro comment.
|
|
gdb_pretty_print_insn allocates and destroys a couple local buffers
each time it is called, which can be many times when disassembling a
region of memory. Avoid that overhead by adding a new class that
holds the buffers and making gdb_pretty_print_insn a method of that
class, so that the buffers can be reused across calls.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_pretty_print_insn): Rename to ...
(gdb_pretty_print_disassembler::pretty_print_insn): ... this.
Remove gdbarch parameter. Adapt to clear the object's buffers
instead of allocating new buffers, and to print using the object's
gdb_disassembler instead of calling gdb_print_insn.
(dump_insns): Use gdb_pretty_print_disassembler.
* disasm.h (gdb_pretty_print_insn): Delete declaration.
(gdb_pretty_print_disassembler): New class.
* record-btrace.c (btrace_insn_history): Use
gdb_pretty_print_disassembler.
|
|
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
|
ui_file_rewind is a ui_file method that only really works with mem
buffer files, and is a nop on other ui_file types. It'd be desirable
to eliminate it from the base ui_file interface, and move it to the
"mem_fileopen" subclass of ui_file instead. A following patch does
just that.
Unfortunately, there are a couple references to ui_file_rewind inside
gdb_disassembler::pretty_print_insn that were made harder to eliminate
with the recent addition of the gdb_disassembler wrapper.
Before the gdb_disassembler wrapper was added, in commit
e47ad6c0bd7aa3 ("Refactor disassembly code"), gdb_pretty_print_insn
used to be passed a ui_file pointer as argument, and it was simple to
adjust that pointer be a "mem_fileopen" ui_file pointer instead, since
there's only one gdb_pretty_print_insn caller.
That commit made gdb_pretty_print_insn be a method of
gdb_disassembler, and removed the method's ui_file parameter at the
same time, replaced by referencing the gdb_disassembler's stream
instead. The trouble is that a gdb_disassembler can be instantiated
with a pointer any kind of ui_file. Casting the gdb_disassembler's
stream to a mem_fileopen ui_file inside
gdb_disassembler::pretty_print_insn in order to call the reset method
would be gross hack.
The fix here is to:
- make gdb_disassembler::pretty_print_insn a be free function again
instead of a method of gdb_disassembler. I.e., bring back
gdb_pretty_print_insn.
- but, don't add back the ui_file * parameter. Instead, move the
mem_fileopen allocation inside. That is a better interface, given
that the ui_file is only ever used as temporary scratch buffer as
an implementation detail of gdb_pretty_print_insn. The function's
real "where to send output" parameter is the ui_out pointer. (A
following patch will add back buffer reuse across invocations
differently).
- don't add back a disassemble_info pointer either. That used to be
necessary for this bit:
err = m_di.read_memory_func (pc, &data, 1, &m_di);
if (err != 0)
m_di.memory_error_func (err, pc, &m_di);
... but AFAIK, it's not really necessary. We can replace those
three lines with a call to read_code. This seems to fix a
regression even, because before commit d8b49cf0c891d0 ("Don't throw
exception in dis_asm_memory_error"), that memory_error_func call
would throw an error/exception, but now it only records the error
in the gdb_disassembler's m_err_memaddr field. (read_code throws
on error.)
With all these, gdb_pretty_print_insn is completely layered on top of
gdb_disassembler only using the latter's public API.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_disassembler::pretty_print_insn): Rename to...
(gdb_pretty_print_insn): ... this. Now a free function. Add back
a 'gdbarch' parameter. Allocate a mem_fileopen stream here.
Adjust to call gdb_print_insn instead of
gdb_disassembler::print_insn.
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only): Add back a
'gdbarch' parameter. Remove gdb_disassembler parameter.
(gdb_disassembly): Don't allocate a gdb_disassembler here.
* disasm.h (gdb_disassembler::pretty_print_insn): Delete
declaration.
(gdb_pretty_print_insn): Re-add declaration.
* record-btrace.c (btrace_insn_history): Don't allocate a
gdb_disassembler here. Adjust to call gdb_pretty_print_insn.
|
|
libdl support
ld/
* testsuite/lib/ld-lib.exp (check_libdl_available): New function.
* testsuite/ld-elf/shared.exp (run_tests): Split tests which require
dlopen support into "dlopen_run_tests". These tests include dl1*main
and dl6*main.
(dlopen_run_tests): New and only run it when check_libdl_available
returns true. XFAIL on *-*-netbsdelf*.
|
|
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
|
|
|
|
Fix commit 171191bac50e ("Add support for STT_IFUNC"),
<https://sourceware.org/ml/binutils/2008-12/msg00052.html>, commit
e04d7088afe0 ("PR ld/14088: Always display addend as signed hex
number"), <https://sourceware.org/ml/binutils/2012-05/msg00123.html> and
commit 343dbc36ffae ("Print addend as signed in objdump"),
<https://sourceware.org/ml/binutils/2012-05/msg00163.html> regressions:
FAIL: VxWorks executable test 1 (dynamic)
FAIL: ld-mips-elf/vxworks-forced-local-1
seen with `mips-vxworks' and `mipsel-vxworks' targets and adjust dump
patterns according to changes made to the presentation of relocation
addends in `readelf -r' and `objdump -r' output.
ld/
* testsuite/ld-mips-elf/vxworks-forced-local-1.d: Correct the
presentation of relocation addends.
* testsuite/ld-mips-elf/vxworks1-lib.rd: Likewise.
* testsuite/ld-mips-elf/vxworks1.dd: Likewise.
* testsuite/ld-mips-elf/vxworks1.rd: Likewise.
|
|
Correct a commit ec9ab52c3217 ("gas: consistently emit diagnostics for
non-zero data emission to .bss/.struct"),
<https://sourceware.org/ml/binutils/2015-12/msg00073.html> regression:
.../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s: Assembler messages:
.../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s:39: Error: attempt to store non-zero value in section `.tbss'
ERROR: -EB -march=mips1 -32 -KPIC .../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s: assembly failed
UNRESOLVED: Shared library with multiple GOTs and TLS
in MIPS target testing and move `tlsvar_ld' to `.tdata' section, in line
with the remaining local dynamic definitions introduced with the set of
tests added with commit f4e584bd00f1 ("TLS support for MIPS"),
<https://sourceware.org/ml/binutils/2005-02/msg00607.html>.
ld/
* testsuite/ld-mips-elf/tls-multi-got-1-1.s: Place `tlsvar_ld'
in `.tdata' section.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Adjust accordingly.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Likewise.
|
|
When a variable's location is expressed as DW_OP_implicit_value, but the
given value is longer than needed, which bytes should be used? GDB's
current logic was introduced with a patch from 2011 and uses the "least
significant" bytes:
https://sourceware.org/ml/gdb-patches/2011-08/msg00123.html
Now consider a sub-value from such a location at a given offset, accessed
through DW_OP_implicit_pointer. Which bytes should be used for that? The
patch above *always* uses the last bytes on big-endian targets, ignoring
the offset.
E.g., given the code snippet
const char foo[] = "Hello, world!";
const char *a = &foo[0];
const char *b = &foo[7];
assume that `foo' is described as DW_OP_implicit_value and `a' and `b'
each as DW_OP_implicit_pointer into that value. Then with current GDB
`*a' and `*b' yield the same result -- the string's zero terminator.
This patch basically reverts the portion of the patch above that deals
with DW_OP_implicit_value. This fixes the offset handling and also goes
back to dropping the last instead of the first bytes on big-endian targets
if the implicit value is longer than needed. The latter aspect of the
change probably doesn't matter for actual programs, but simplifies the
logic.
The patch also cleans up the original code a bit and adds appropriate test
cases.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-op-stack-value.exp: Adjust expected result of
taking a 2-byte value out of a 4-byte DWARF implicit value on
big-endian targets.
* gdb.dwarf2/nonvar-access.exp: Add more comments to existing
logic. Add test cases for DW_OP_implicit.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): For
DWARF_VALUE_LITERAL, no longer ignore the offset on big-endian
targets. And if the implicit value is longer than needed, extract
the first bytes instead of the "least significant" ones.
|
|
If GDB is running when gdb_skip_xml_tests is called with
--target_board=native-extended-gdbserer.exp, it fails with:
(gdb) FAIL: ....exp: set tdesc filename .../trivial.xml (got interactive prompt)
monitor exit
Diagnose this in gdb_skip_xml_tests to generate a more meaningful error message:
ERROR: tcl error sourcing ....exp.
ERROR: GDB must not be running in gdb_skip_xml_tests.
while executing
[...]
testsuite/
* lib/gdb.exp (gdb_skip_xml_tests): Error if GDB is running.
|
|
Parts of gdb.btrace/enable.exp are only valid for native debug. The check for
skip_gdbserver_tests is done while GDB is running, though, which causes it to
fail with --target_board=native-extended-gdbserver. Exit GDB before that check.
testsuite/
* gdb.btrace/enable.exp: Call gdb_exit before skip_gdbserver_tests.
|
|
With --target_board=native-extended-gdbserver non-stop tests are failing with
UNTESTED: gdb.btrace/non-stop.exp: failed to run to main
Fix that by adding '-ex "set non-stop on"' to GDBFLAGS before restarting.
testsuite/
* gdb.btrace/non-stop.exp: Add '-ex "set non-stop on"' to GDBFLAGS.
|
|
We may silently skip gdb.btrace tests if
- the target does not support record-btrace
- the target does not support TSX
- the target does not support gdbserver
- we fail to compile the test
- we fail to run to main
Add unsupported/untested messages for each of those.
testsuite/
* gdb.btrace/buffer-size.exp: Add unsupported/untested message if
the test is skipped.
* gdb.btrace/data.exp: Likewise.
* gdb.btrace/delta.exp: Likewise.
* gdb.btrace/dlopen.exp: Likewise.
* gdb.btrace/enable-running.exp: Likewise.
* gdb.btrace/enable.exp: Likewise.
* gdb.btrace/exception.exp: Likewise.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/gcore.exp: Likewise.
* gdb.btrace/instruction_history.exp: Likewise.
* gdb.btrace/multi-thread-step.exp: Likewise.
* gdb.btrace/nohist.exp: Likewise.
* gdb.btrace/non-stop.exp: Likewise.
* gdb.btrace/reconnect.exp: Likewise.
* gdb.btrace/record_goto-step.exp: Likewise.
* gdb.btrace/record_goto.exp: Likewise.
* gdb.btrace/rn-dl-bind.exp: Likewise.
* gdb.btrace/segv.exp: Likewise.
* gdb.btrace/step.exp: Likewise.
* gdb.btrace/stepi.exp: Likewise.
* gdb.btrace/tailcall-only.exp: Likewise.
* gdb.btrace/tailcall.exp: Likewise.
* gdb.btrace/tsx.exp: Likewise.
* gdb.btrace/unknown_functions.exp: Likewise.
* gdb.btrace/vdso.exp: Likewise.
|
|
When recording is started for a running thread, GDB was able to start tracing
but then failed to read registers to insert the initial entry for the current
PC. We don't really need that initial entry if we don't know where exactly we
started recording. Skip that step to allow recording to be started while
threads are running.
If we do run into errors, we need to undo the tracing enable to not leak this
thread. The operation did not complete so our caller won't clean up this
thread.
For the BTRACE_FORMAT_PT btrace format, we don't need that initial entry since
it will be recorded in the trace. We can omit the call to btrace_add_pc.
gdb/
* btrace.c (btrace_enable): Do not call btrace_add_pc for
BTRACE_FORMAT_PT or if can_access_registers_ptid returns false.
(btrace_fetch): Assert can_access_registers_ptid.
* record-btrace.c (require_btrace_thread, record_btrace_info): Call
validate_registers_access.
testsuite/
* gdb.btrace/enable-running.c: New.
* gdb.btrace/enable-running.exp: New.
|
|
Add a function can_access_registers_ptid that behaves like
validate_registers_access but returns a boolean value instead of throwing an
exception.
gdb/
* gdbthread.h (can_access_registers_ptid): New.
* thread.c (can_access_registers_ptid): New.
|
|
ld/
* testsuite/ld-unique/unique.exp (Could not link a dynamic executable):
Append $board_cflags to link commands.
|
|
ld/
2017-01-31 Senthil Kumar Selvaraj <senthilkumar.selvaraj@microchip.com>
* testsuite/ld-scripts/print-memory-usage-1.l: Relax
check for digit in second decimal place.
|
|
gold/
PR gold/21090
* x86_64.cc (Target_x86_64::can_convert_mov_to_lea): Add check
for predefined symbol.
(Target_x86_64::Relocate::relocate): Fix formatting.
|
|
ld/
PR ld/20828
* testsuite/ld-elf/shared.exp: Correct PR ld/20828 test
indentation.
|
|
gdb/ChangeLog:
2017-02-01 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_fast_tracepoint_valid_at): Use gdb_insn_length.
|
|
|
