Age | Commit message (Collapse) | Author | Files | Lines |
|
The failure on this PR is due to using the same bfd section for
multiple output sections. Commit 21401fc7bf67 managed to create
duplicate linker script output section statements, but not the actual
bfd sections.
PR 27100
* ldlang.h (lang_output_section_statement_type): Add dup_output.
* ldlang.c (lang_output_section_statement_lookup): Set dup_output.
(init_os): Test dup_output rather than constraint.
* testsuite/ld-scripts/pr27100.d,
* testsuite/ld-scripts/pr27100.s,
* testsuite/ld-scripts/pr27100.t: New test.
* testsuite/ld-scripts/data.exp: Run it. Don't exclude aout here.
* testsuite/ld-scripts/data.d: Do so here instead.
* testsuite/ld-scripts/fill.d: Likewise.
* testsuite/ld-scripts/fill16.d: Likewise.
|
|
|
|
Both QEMU and kgdb make the assumption that the '?' packet is only
sent during the initial setup of a gdbstub connection. Both use that
knowledge to reset breakpoints and ensure the gdbstub is in a
clean-state on a resumed connection. This can cause confusion for
others implementing clients that speak to gdbstub devices. To avoid
that make the language clearer that this is a start-up query packet
that you only expect to see once.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
gdb/doc/ChangeLog:
* gdb.texinfo (Packets): Clarify language for ? packet.
Change-Id: Iae25d3110fe28b8d2467704962a6889e55224ca5
|
|
Add Intel Linear Address Masking (LAM) property support. LAM modifies
the checking that is applied to 64-bit linear addresses, allowing
software to use of the untranslated address bits for metadata.
bfd/
* elf-linker-x86.h (elf_x86_cet_report): Renamed to ...
(elf_x86_prop_report): This.
(elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report
and lam_u57_report.
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and
GNU_PROPERTY_X86_FEATURE_1_LAM_U57.
(_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only
for 64-bit output.
binutils/
* NEWS: Mention LAM_U48 and LAM_U57 support.
* elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57.
(usage): Add lam_u48 and lam_u57.
* readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57.
* doc/binutils.texi: Update elfedit with lam_u48 and lam_u57
support.
* testsuite/binutils-all/x86-64/lam-u48.d: New file.
* testsuite/binutils-all/x86-64/lam-u48.s: Likewise.
* testsuite/binutils-all/x86-64/lam-u57.d: Likewise.
* testsuite/binutils-all/x86-64/lam-u57.s: Likewise.
include/
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New.
(GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise.
ld/
* NEWS: Mention LAM_U48 and LAM_U57 support.
* ld.texi: Document LAM_U48 and LAM_U57 support.
* emulparams/cet.sh: Updated.
* emulparams/elf_x86_64.sh: Source x86-64-lam.sh.
* emulparams/x86-64-lam.sh: New file.
* testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run LAM tests.
|
|
This commit removes some, but not all, uses of LA_PRINT_STRING. In
this commit I've removed those uses where there is an obvious language
object on which I can instead call the printstr method.
In the remaining 3 uses it is harder to know if the correct thing is
to call printstr on the current language, or on a specific language.
Currently obviously, we always call on the current language (as that's
what LA_PRINT_STRING does), and clearly this behaviour is good enough
right now, but is it "right"? I've left them for now and will give
them more thought in the future.
gdb/ChangeLog:
* expprint.c (print_subexp_standard): Replace uses of
LA_PRINT_STRING.
* f-valprint.c (f_language::value_print_inner): Likewise.
* guile/scm-pretty-print.c (ppscm_print_string_repr): Likewise.
* p-valprint.c (pascal_language::value_print_inner): Likewise.
* python/py-prettyprint.c (print_string_repr): Likewise.
|
|
Move the rust_language class declaration into the rust-lang.h header
file. This allows for the function implementations called directly in
rust-lang.c and rust-exp.y without the need for trampoline functions.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* rust-exp.y (rust_parse): Rename to...
(rust_language::parser): ...this.
* rust-lang.c (-rust_printstr): Rename to...
(rust_language::printstr): ...this.
(rust_value_print_inner): Delete declaration.
(val_print_struct): Rename to...
(rust_language::val_print_struct): ...this. Update calls to
member functions.
(rust_print_enum): Rename to...
(rust_language::print_enum): ...this. Update calls to member
functions.
(rust_value_print_inner): Rename to...
(rust_language::value_print_inner): ...this. Update calls to
member functions.
(exp_descriptor_rust): Rename to...
(rust_language::exp_descriptor_tab): ...this.
(class rust_language): Move to rust-lang.h.
(rust_language::language_arch_info): Implementation moved to here
from class declaration.
(rust_language::print_type): Likewise.
(rust_language::emitchar): Likewise.
(rust_language::is_string_type_p): Likewise.
* rust-lang.h: Add 'demangle.h', 'language.h', 'value.h', and
'c-lang.h' includes.
(rust_parse): Delete declaration.
(class rust_language): Class declaration moved here from
rust-lang.c.
|
|
In this commit:
commit b7c6e27dbbbbe678b2e2f0bf617605e055e1b378
Date: Tue Aug 4 17:07:59 2020 +0100
gdb: Convert language_data::la_op_print_tab to a method
A bug was introduced, the objc language now returns the wrong op_print
table. Fixed in this commit.
gdb/ChangeLog:
* objc-lang.c (objc_language::opcode_print_table): Return
objc_op_print_tab.
|
|
Move the pascal_language class declaration into the p-lang.h header
file. This allows for the function implementations to be spread over
the different p-*.c files without the need for global trampoline
functions.
As a consequence of this change many of the Pascal value and type
printing helper functions have become member functions within the
pascal_language class.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* p-exp.y (exp): Update call to pascal_is_string_type.
(pascal_parse): Rename to...
(pascal_language::parser): ...this.
* p-lang.c (is_pascal_string_type): Rename to...
(pascal_is_string_type): ...this.
(pascal_one_char): Rename to...
(pascal_language::print_one_char): ...this.
(pascal_printchar): Rename to...
(pascal_language::printchar): ...this. Update call to
print_one_char member function.
(pascal_op_print_tab): Rename to...
(pascal_language::op_print_tab): ...this.
(class pascal_language): Moved to p-lang.h.
(pascal_language::language_arch_info): Function implementation
moved out of class declaration.
(pascal_language::printstr): Likewise.
* p-lang.h (pascal_parse): Delete declaration.
(pascal_is_string_type): Declare.
(pascal_print_type): Delete declaration.
(pascal_print_typedef): Delete declaration.
(pascal_value_print_inner): Delete declaration.
(pascal_value_print): Delete declaration.
(pascal_type_print_method_args): Delete declaration.
(is_pascal_string_type): Delete declaration.
(pascal_printchar): Delete declaration.
(pascal_builtin_types): Delete declaration.
(pascal_type_print_base): Delete declaration.
(pascal_type_print_varspec_prefix): Delete declaration.
(class pascal_language): Moved here from p-lang.c.
* p-typeprint.c (pascal_type_print_varspec_suffix): Delete
declaration.
(pascal_type_print_derivation_info): Delete declaration.
(pascal_print_type): Rename to...
(pascal_language::print_type): ...this. Update calls to member
functions.
(pascal_print_typedef): Rename to...
(pascal_language::print_typedef): ...this. Update calls to member
functions.
(pascal_type_print_derivation_info): Rename to...
(pascal_language::type_print_derivation_info): ...this.
(pascal_type_print_method_args): Rename to...
(pascal_language::type_print_method_args): ...this.
(pascal_type_print_varspec_prefix): Rename to...
(pascal_language::type_print_varspec_prefix): ...this. Update
calls to member functions.
(pascal_print_func_args): Rename to...
(pascal_language::print_func_args): ...this. Update calls to
member functions.
(pascal_type_print_func_varspec_suffix): Rename to...
(pascal_language::type_print_func_varspec_suffix): ...this.
Update calls to member functions.
(pascal_type_print_varspec_suffix): Rename to...
(pascal_language::type_print_varspec_suffix): ...this. Update
calls to member functions.
(pascal_type_print_base): Rename to...
(pascal_language::type_print_base): ...this. Update calls to
member functions.
* p-valprint.c (pascal_value_print_inner): Rename to...
(pascal_language::value_print_inner): ...this. Update calls to
member functions.
(pascal_value_print): Rename to...
(pascal_language::value_print): ...this. Update calls to member
functions.
|
|
Move the go_language class into go-lang.h, this allows us to have
member functions implemented directly in the different go-*.c files
instead of having to trampoline out to global functions.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* go-exp.y (go_parse): Rename to...
(go_language::parser): ...this.
* go-lang.c (go_demangle): Rename to...
(go_language::demangle_symbol): ...this.
(go_language::expression_ops): Implementation moved here out of
class declaration.
(go_op_print_tab): Rename to...
(go_language::op_print_tab): ...this, update comment.
(class go_language): Declaration moved to go-lang.h.
(go_language::language_arch_info): Implementation moved here out
of class declaration.
* go-lang.h (go_parse): Delete declaration.
(go_demangle): Delete declaration.
(go_print_type): Delete declaration.
(go_value_print_inner): Delete declaration.
(class go_language): Declaration moved here from go-lang.c.
* go-typeprint.c (go_print_type): Rename to...
(go_language::print_type): ...this.
* go-valprint.c (go_value_print_inner): Rename to...
(go_language::value_print_inner): ...this.
* symtab.c (demangle_for_lookup): Call demangle_symbol method on
the go_language object.
|
|
Now that every use of the LA_EMIT_CHAR macro is within a language_defn
member function we can simply call the emitchar member function
directly instead of using the LA_EMIT_CHAR macro.
If we are ever inside a language object, for example, cplus_language,
while current_language points at something other than cplus_language
then this commit will result in a change in behaviour. However, I
believe if we did have such a difference then this would be a bug in
GDB. AS such I'm going to claim there _should_ be no user visible
changes from this commit.
gdb/ChangeLog:
* c-lang.c (language_defn::printchar): Call emitchar, not
LA_EMIT_CHAR.
* f-lang.h (f_language::printchar): Likewise.
* language.h (LA_EMIT_CHAR): Delete macro.
* rust-lang.c (rust_language::printchar): Call emitchar, not
LA_EMIT_CHAR.
|
|
This commit removes the global function c_printchar and moves the
implementation into language_defn::printchar.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* c-lang.c (c_printchar): Rename to...
(language_defn::printchar): ...this.
* c-lang.h (c_printchar): Delete declaration.
* language.c (language_defn::printchar): Delete this
implementation. Is now implemented in c-lang.c.
|
|
The function c_printchar is called from two places; it provides the
implementation of language_defn::printchar and it is called from
dwarf2_compute_name.
It would be nice to rename c_printchar as language_defn::printchar and
so avoid the trampoline.
To achieve this, instead of calling c_printchar directly from the
DWARF code, I lookup the C++ language object and call the printchar
member function.
In a later commit I can then rename c_printchar.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* dwarf2/read.c (dwarf2_compute_name): Call methods on C++
language object instead of calling global functions directly.
|
|
Spotted that print_char_chars appears to be unused, delete it. There
should be no user visible changes after this commit.
gdb/ChangeLog:
* valprint.c (print_char_chars): Delete definition.
* valprint.h (print_char_chars): Delete declaration.
|
|
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Add myself.
|
|
|
|
gnu-nat.c was getting the inclusion of vm_param.h only by luck. We need
to explicitly include it to be sure to get the definitions of
VM_MIN/MAX_ADDRESS.
gdb/ChangeLog:
* gnu-nat.c: Include <mach/vm_param.h>.
|
|
|
|
gdb/ChangeLog:
* frame.c: Remove trailing white spaces.
* frame.h: Likewise.
|
|
The word "regnum" in comments should be uppercase, because it
reflects a variable name in the code.
gdb/ChangeLog
* arc-linux-tdep.c: Replace "regnum" with "REGNUM" in comments.
|
|
With this patch in place it is possible to build a GDB that
can run on ARC (GNU/Linux) hosts for debugging ARC targets.
The "arc-linux-nat.c" is a rather small one that mostly deals
with registers and a few thread related hooks.
v2 [1]:
- Remove "void" from the input of "_initialize_arc_linux_nat ()"
[1] Tom's remark after the first patch
https://sourceware.org/pipermail/gdb-patches/2020-November/173223.html
gdb/ChangeLog:
* Makefile.in (ALLDEPFILES): Add arc-linux-nat.c.
* configure.host (host to gdb names): Add arc*-*-linux*.
* configure.nat (gdb_host_cpu): Add arc.
* arc-linux-nat.c: New.
|
|
All the arc_linux_supply_*() target operations and the
arc_linux_collect_v2_regset() in arc-linux-tdep.c were
supplying/collecting all the registers in regcache as if the
REGNUM was set to -1.
The more efficient behavior is to examine the REGNUM and act
accordingly. That is what this patch does.
gdb/ChangeLog:
* arc-linux-tdep.c (supply_register): New.
(arc_linux_supply_gregset, arc_linux_supply_v2_regset,
arc_linux_collect_v2_regset): Consider REGNUM.
|
|
Implement functions needed to unwind signal frames on ARC Linux targets.
gdb/ChangeLog
* arc-linux-tdep.c (arc_linux_sc_reg_offsets): New static variable.
(arc_linux_is_sigtramp): New function.
(arc_linux_sigcontext_addr): Likewise.
(arc_linux_init_osabi): Use them.
|
|
This patch adds the necessary infrastructure to handle signal frames for
ARC architecture. It is fairly similar to what any other architecture
would have. Linux specific parts will be in a separate patch.
v2 [1]:
- Make the logic of "arc_sigtramp_frame_sniffer ()" simpler.
[1] Tom's remark for the first version
https://sourceware.org/pipermail/gdb-patches/2020-November/173221.html
gdb/ChangeLog:
* arc-tdep.c (arc_make_sigtramp_frame_cache): New function.
(arc_sigtramp_frame_this_id): Likewise.
(arc_sigtramp_frame_prev_register): Likewise.
(arc_sigtramp_frame_sniffer): Likewise.
(arc_siftramp_frame_unwind): New global variable.
(arc_gdbarch_init): Use sigtramp capabilities.
(arc_dump_tdep): Print sigtramp fields.
* arc-tdep.h (gdbarch_tdep): Add sigtramp fields.
|
|
|
|
For the expression rewrite series, I needed to move enum noside
earlier in expression.h. Because this is a pure move, and because it
seems harmless and uncontroversial to move an enum definition earlier
in a file, I'm pushing it in early, to reduce the size of that series.
Tested by rebuilding.
gdb/ChangeLog
2020-12-21 Tom Tromey <tom@tromey.com>
* expression.h (enum noside): Move earlier.
|
|
Calls through interpreter_exec_cmd can cause the output state to be modified in
a way which doesn't get back after the execution.
It looks like the intent is that interp::resume should put things back how they
should be, however, mi_interp::resume modifies gdb_stdout and nothing currently
restores it to the previous state.
To see the broken behaviour:
gdb -ex starti -ex bt -ex 'interpreter-exec mi echo' -ex bt -ex q echo <<<''
Prior to this patch, on a terminal environment, the first backtrace is
coloured, and the second backtrace is not. The reason is that
stdio_file::can_emit_style_escape becomes false, because the gdb_stdout gets
overwritten in mi_interp::resume and not replaced.
gdb/ChangeLog:
* interps.c (interpreter_exec_cmd): Restore streams pointers.
gdb/testsuite/ChangeLog:
* gdb.base/style-interp-exec-mi.exp: New.
* gdb.base/style-interp-exec-mi.c: New.
Signed-off-by: Peter Waller <p@pwaller.net>
Change-Id: Id87423b262d058857ea9dca5866ca6471741e512
|
|
Use gdb_test instead of send_gdb + gdb_expect. Use proc_with_prefix to
help with name uniqueness.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp: Replace send_gdb + gdb_expect with
gdb_test. Use proc_with_prefix.
Change-Id: Ieee8fb2c80f596f60397fab7633773a7f8c8c879
|
|
For 32-bit position independent executables, GCC generates an extra call to
__x86.get_pc_thunk.<reg>
which appears in the function call history. It is correct to appear there
but this confuses the tests, which check for an expected sequence of
functions.
Build with nopie to avoid this complication.
gdb/testsuite/ChangeLog:
2020-12-04 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/exception.exp: Build with nopie.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/unknown_functions.exp: Likewise.
|
|
The gdb.btrace/multi-inferior.exp test creates multiple inferiors to check
that recording is per-inferior.
When run with the native-gdbserver board, this test hangs when trying to
add the second inferior over the remote connection. Skip the test.
Note that the test runs fine with the native-extended-gdbserver board file
and we want to keep testing that configuration.
gdb/testsuite/ChangeLog:
2020-12-11 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/multi-inferior.exp: Skip if use_gdb_stub.
|
|
gdb/testsuite/ChangeLog:
2020-12-14 Markus Metzger <markus.t.metzger@intel.com>
* gdb.python/py-record-btrace.exp: Make test names unique.
* gdb.python/py-record-full.exp: Likewise.
|
|
gdb/testsuite/ChangeLog:
2020-12-04 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/data.exp: Make test names unique.
* gdb.btrace/delta.exp: Likewise.
* gdb.btrace/enable.exp: Likewise.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/nohist.exp: Likewise.
* gdb.btrace/non-stop.exp: Likewise.
* gdb.btrace/rn-dl-bind.exp: Likewise.
* gdb.btrace/step.exp: Likewise.
* gdb.btrace/stepi.exp: Likewise.
* gdb.btrace/tailcall.exp: Likewise.
|
|
When trying to use one of the record commands without having enabled
recording first, GDB gives the error message:
(gdb) record function-call-history
No record target is currently active.
Use one of the "target record-<TAB><TAB>" commands first.
In the record help, however, we say:
(gdb) help record
record, rec
Start recording.
List of record subcommands:
record btrace, record b -- Start branch trace recording.
record delete, record del, record d -- Delete the rest of execution log and start recording it anew.
record full -- Start full execution recording.
record function-call-history -- Prints the execution history at function granularity.
record goto -- Restore the program to its state at instruction number N.
record instruction-history -- Print disassembled instructions stored in the execution log.
record save -- Save the execution log to a file.
record stop, record s -- Stop the record/replay target.
Change the above error message to
(gdb) record function-call-history
No recording is currently active.
Use the "record full" or "record btrace" command first.
to align with the help text.
gdb/ChangeLog:
2020-12-03 Markus Metzger <markus.t.metzger@intel.com>
* record.c (require_record_target): Rephrase error message.
(info_record_command): Likewise.
gdb/testsuite/ChangeLog:
2020-12-03 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable.exp: Update error message.
* gdb.btrace/multi-inferior.exp: Likewise.
* gdb.btrace/reconnect.exp: Likewise.
* gdb.python/py-record-btrace.exp: Likewise.
* gdb.python/py-record-full.exp: Likewise.
|
|
gdb/doc/ChangeLog
* gdb.texinfo (Requirements): Add GMP to list of requirements.
|
|
|
|
Add a proc save_target_board_info, similar to save_vars, such that we can do:
...
save_target_board_info { multilib_flags } {
global board
set board [target_info name]
unset_board_info multilib_flags
set_board_info multilib_flags "$override_multilib_flags"
...
}
...
and use it in gdb_compile_shlib.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-12-20 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (save_target_board_info): New proc.
(gdb_compile_shlib): Use save_target_board_info.
|
|
|
|
Move sym declaration just before use to avoid -Wmaybe-uninitialized
warning from GCC 11.
PR gold/27097
* incremental.cc (Sized_relobj_incr::do_add_symbols): Move sym
declaration just before use.
(Sized_incr_dynobj::do_add_symbols): Likewise.
* plugin.cc (Sized_pluginobj::do_add_symbols): Likewise.
|
|
Introduce support test procs:
- supports_scalar_storage_order_attribute, and
- supports_gnuc
and use them in test-case gdb.base/endianity.exp.
Tested on x86_64-linux with gcc-7.5.0, gcc-4.8.5, and clang 10.0.1.
gdb/testsuite/ChangeLog:
2020-12-19 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (supports_scalar_storage_order_attribute)
(supports_gnuc): New proc.
* gdb.base/endianity.exp: Define TEST_SSO. Eliminate
test_compiler_info calls. Add unsupported message.
* gdb.base/endianity.c: Use TEST_SSO.
|
|
Comparing types of enum fields results in a crash, because they don't
have a type.
It can be reproduced by comparing the types of 2 instances of the same
enum type in different objects:
enum.h:
enum e
{
zero,
one,
};
enum-1.c:
#include <enum.h>
int func();
enum e e1;
int main()
{
return e1 + func();
}
enum-2.c:
#include <enum.h>
enum e e2;
int func()
{
return e2;
}
$ gcc -g -oenum enum-1.c enum-2.c
$ gdb -q enum.exe
Reading symbols from enum.exe...
(gdb) py print(gdb.parse_and_eval("e1").type==gdb.parse_and_eval("e2").type)
Thread 1 received signal SIGSEGV, Segmentation fault.
[Switching to Thread 6184.0x1cc4]
check_typedef (type=0x0) at C:/src/repos/binutils-gdb.git/gdb/gdbtypes.c:2745
2745 while (type->code () == TYPE_CODE_TYPEDEF)
gdb/ChangeLog:
2020-12-19 Hannes Domani <ssbssa@yahoo.de>
PR exp/27070
* gdbtypes.c (check_types_equal): Don't compare types of enum fields.
gdb/testsuite/ChangeLog:
2020-12-19 Hannes Domani <ssbssa@yahoo.de>
PR exp/27070
* gdb.python/compare-enum-type-a.c: New test.
* gdb.python/compare-enum-type-b.c: New test.
* gdb.python/compare-enum-type.exp: New file.
* gdb.python/compare-enum-type.h: New test.
|
|
Avoid the error message when source-highlight is actually available.
2020-12-19 Bernd Edlinger <bernd.edlinger@hotmail.de>
* configure.ac: Move the static libs vs. source-highlight
error message to a better place.
* configure: Regenerate.
|
|
|
|
It was renamed from type to m_type.
gdb/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* gdb-gdb.py.in: Fix main_type field name.
|
|
gdb/doc/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* python.texi (TUI Windows In Python): Remove erroneous 'a'.
|
|
This makes it possible to disable the address in the result string:
const char *str = "alpha";
(gdb) py print(gdb.parse_and_eval("str").format_string())
0x404000 "alpha"
(gdb) py print(gdb.parse_and_eval("str").format_string(address=False))
"alpha"
gdb/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* python/py-value.c (valpy_format_string): Implement address keyword.
gdb/doc/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* python.texi (Values From Inferior): Document the address keyword.
gdb/testsuite/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* gdb.python/py-format-string.exp: Add tests for address keyword.
|
|
Considering this example:
struct C
{
int func() { return 1; }
} c;
int main()
{
return c.func();
}
Accessing the fields of C::func, when requesting the function by its
type, works:
(gdb) py print(gdb.parse_and_eval('C::func').type.fields()[0].type)
C * const
But when trying to do the same via a class instance, it fails:
(gdb) py print(gdb.parse_and_eval('c')['func'].type.fields()[0].type)
Traceback (most recent call last):
File "<string>", line 1, in <module>
TypeError: Type is not a structure, union, enum, or function type.
Error while executing Python code.
The difference is that in the former the function type is TYPE_CODE_FUNC:
(gdb) py print(gdb.parse_and_eval('C::func').type.code == gdb.TYPE_CODE_FUNC)
True
And in the latter the function type is TYPE_CODE_METHOD:
(gdb) py print(gdb.parse_and_eval('c')['func'].type.code == gdb.TYPE_CODE_METHOD)
True
So this adds the functionality for TYPE_CODE_METHOD as well.
gdb/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* python/py-type.c (typy_get_composite): Add TYPE_CODE_METHOD.
gdb/testsuite/ChangeLog:
2020-12-18 Hannes Domani <ssbssa@yahoo.de>
* gdb.python/py-type.exp: Add tests for TYPE_CODE_METHOD.
|
|
The arguments to these functions are file_ptr, so these declarations
were accidentally implicitly down-casting them to signed int. This
allows for reading files between 2 and 4 GB in size in my testing (I
don't have a larger dll currently to test). These may not be natively
supported by Windows, but can appear when using split-dwarf information.
This solves a "can't get string table" error resulting from attempting
to pass a negative offset to bfd_seek. I encountered this occuring while
trying to use a debug file for libLLVM.dll, but searching online reveals
at least one other person may have run into a similar problem with
Firefox?
https://sourceforge.net/p/mingw-w64/mailman/mingw-w64-public/thread/CA+cU71k2bU0azQxjy4-77ynQj1O+TKmgtaTKe59n7Bjub1y7Tg@mail.gmail.com/
With this patch, the debug file appears to load successfully and I can
see debug information in gdb for the library.
gdb/ChangeLog:
* coffread.c (linetab_offset): Change type to file_ptr.
(linetab_size): Likewise.
(enter_linenos): Change parameter type to file_ptr.
(init_lineno): Likewise.
(init_stringtab): Likewise.
(coff_symtab_read): Likewise.
(coff_symfile_read): Change variable types to file_ptr.
Change-Id: I6ae3bf31efc51c826734ade6731ea6b1c32129f3
|
|
This changes the test case gdb.ada/fixed_points.exp to also be run
with -fgnat-encodings=minimal. This change pointed out that the test
case had a few incorrect expected outputs; these are fixed as well.
Note that the Overprecise_Object test only uses the non-legacy output
with GCC trunk.
gdb/testsuite/ChangeLog
2020-12-18 Tom Tromey <tromey@adacore.com>
* gdb.ada/fixed_points.exp: Also run with
-fgnat-encodings=minimal. Update expected output.
|
|
Build only unversioned libdep and remove the installed libdep.la since
only a single libdep.so is needed.
PR ld/27082
* Makefile.am
(libdep_la_LDFLAGS): Add -module -avoid-version.
(libdep_la_LINK): New.
(install-data-local): Depend on $(install-bfdpluginLTLIBRARIES)
and remove libdep.la.
|
|
Copy elf_gnu_osabi_retain from input only for relocatable link since
SHF_GNU_RETAIN has no impact on non-relocatable outputs.
bfd/
PR ld/27091
* elflink.c (elf_link_input_bfd): Copy elf_gnu_osabi_retain
from input only for relocatable link.
ld/
PR ld/27091
* testsuite/ld-elf/retain7.s: New file.
* testsuite/ld-elf/retain7a.d: Likewise.
* testsuite/ld-elf/retain7b.d: Likewise.
|
|
bfd/
* elf32-microblaze.c (dbg): Delete unused variable.
* elf32-nds32.c (relax_group_section_id_list): Make static.
* som.c (reloc_queue): Make static.
* xtensa-isa.c (xtisa_errno, xtisa_error_msg): Make static.
include/
* xtensa-isa-internal.h (xtisa_errno, xtisa_error_msg): Delete.
|