aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-07-10ada-lang.c:coerce_unspec_val_to_type: Preserve laziness.Joel Brobecker4-2/+22
ada-lang.c:coerce_unspec_val_to_type does: if (value_lazy (val) || TYPE_LENGTH (type) > TYPE_LENGTH (value_type (val))) result = allocate_value_lazy (type); else { result = allocate_value (type); memcpy (value_contents_raw (result), value_contents (val), TYPE_LENGTH (type)); } set_value_component_location (result, val); set_value_bitsize (result, value_bitsize (val)); set_value_bitpos (result, value_bitpos (val)); set_value_address (result, value_address (val)); set_value_optimized_out (result, value_optimized_out (val)); Notice that before value_optimized_out was made to auto-fetch lazy values, VAL would end up still lazy if it was lazy on entry. It's not really a problem here if VAL is lazy, and VAL->optimized_out is 0, because RESULT is also left lazy. IOW, this just wants to copy the VAL->optimized_out flag to RESULT->optimized_out, nothing else. As a side-effect of the change in value_optimized_out, the following testcase now regresses. Consider: type Small is range -64 .. 63; for Small'Size use 7; type Arr is array (1..10) of Small; pragma Pack (Arr); type Arr_Ptr is access Arr; An_Arr_Ptr : Arr_Ptr := new Arr'(10, 20, 30, 40, 50, 60, 62, 63, -23, 42); Trying to print one element of An_Arr_Ptr yields: (gdb) p an_arr_ptr(3) Cannot access memory at address 0x0 The patch adds the value_optimized_out_const function for that, allowing us to avoid trying to fetch a value at a dummy address. (I found this out by grepping for set_value_optimized_out and trying to convert the uses I found to instead allocate the value with allocate_optimized_out_value.) Tested on x86_64 Fedora 17. gdb/ 2013-07-09 Pedro Alves <palves@redhat.com> * ada-lang.c (coerce_unspec_val_to_type): Use value_optimized_out_const. * value.c (value_optimized_out_const): New function. * value.h (value_optimized_out_const): New declaration.
2013-07-10Fix FAIL: gdb.ada/small_reg_param.exp: continue to call_meJoel Brobecker2-1/+6
If enough information is provided by the compiler, the debugger now prints the entry value of various parameters: (gdb) continue Continuing. Breakpoint 2, pck.call_me (w=w@entry=50) at [...] 20 Last_Word := W; This patch adjusts the expected output to allow an optional "w@entry=" in the parameter value. gdb/testsuite/ChangeLog: * gdb.ada/small_reg_param.exp: Accept optional entry value for parameter "w".
2013-07-10Remove trailing space in gdb.ada/small_reg_param.expJoel Brobecker2-1/+5
gdb/testsuite/ChangeLog: * gdb.ada/small_reg_param.exp: Remove trailing space.
2013-07-10daily updateAlan Modra1-1/+1
2013-07-09gas/testsuite/Richard Sandiford5-0/+101
* gas/mips/la-reloc.s, gas/mips/la-reloc.d, gas/mips/dla-reloc.s, gas/mips/dla-reloc.d: Add files missing from earlier commit.
2013-07-09 * defs.h (enum val_prettyformat): Renamed from val_prettyprint.Doug Evans19-74/+98
Enum values rename as well. All uses updated. * valprint.h (value_print_options): Rename member pretty to pretty format. Rename member prettyprint_arrays to prettyformat_arrays. Rename member prettyprint_structs to prettyformat_structs. All uses updated. (get_no_prettyformat_print_options): Renamed from get_raw_print_options. * valprint.c (get_no_prettyformat_print_options): Renamed from get_raw_print_options. All callers updated. (show_prettyformat_structs): Renamed from show_prettyprint_structs. All callers updated. (show_prettyformat_arrays): Renamed from show_prettyprint_arrays. All callers updated. (_initialize_valprint): Improve help text for "set print pretty" and "set print arrays". testsuite/ * gdb.base/default.exp: Update expected output of "show print array" and "show print pretty".
2013-07-09merge from gccDJ Delorie3-23/+29
2013-07-09Revert recent changes to value_bits_valid.Andrew Burgess2-4/+11
http://sourceware.org/ml/gdb-patches/2013-07/msg00243.html * value.c (value_bits_valid): Revert previous change, and change by Pedro on 2013-07-04, due to regressions in gdb.dwarf2/implptr.exp and gdb.dwarf2/pieces.exp.
2013-07-092013-07-09 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-141/+26
* vms-alpha.c (struct vms_private_data_struct): Remove flag_hash_long_names and flag_show_after_trunc. (hash_string): Remove. (_bfd_vms_length_hash_symbol): Remove. (alpha_vms_write_exec): Remove call to _bfd_vms_length_hash_symbol. (_bfd_vms_write_egsd): Likewise. Rewrite condition. (_bfd_vms_write_ehdr): Remove code that set removed flags. (_bfd_vms_write_etir): Remove call to _bfd_vms_length_hash_symbol. (vms_bfd_is_local_label_name): Remove trace call.
2013-07-092013-07-09 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-1/+6
* makefile.vms (OBJS): Add dwarfnames.obj
2013-07-09binutils/Tristan Gingold4-2/+31
2013-07-09 Tristan Gingold <gingold@adacore.com> * configure.com: Add new defines to match changes in configure. gas/ 2013-07-09 Tristan Gingold <gingold@adacore.com> * configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
2013-07-092013-07-09 Tristan Gingold <gingold@adacore.com>Tristan Gingold4-69/+35
* hosts/alphavms.h: Include config.h and ansidecl.h, remove useless macros. * configure.com: Adjust to match changes in configure. * makefile.vms (OBJS): Update list.
2013-07-09daily updateAlan Modra1-1/+1
2013-07-08 * scripttempl/elf.sc: Handle function names and otherJeff Law2-1/+6
text after .text.unlikely too.
2013-07-08Replace Xmmword with Qword on cvttps2piH.J. Lu7-3/+19
gas/testsuite/ PR gas/13572 * gas/i386/simd.s: Add a test for cvttps2pi. * gas/i386/simd-intel.d: Updated. * gas/i386/simd.d: Likewise. opcodes/ PR gas/13572 * i386-opc.tbl: Replace Xmmword with Qword on cvttps2pi. * i386-tbl.h: Regenerated.
2013-07-082013-07-08 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-0/+8
* ia64.h (STB_VMS_WEAK, STB_VMS_SYSTEM): Add.
2013-07-082013-07-08 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-6/+11
* scripttempl/ia64vms.sc: Add support of per data and per function sections.
2013-07-082013-07-08 Andreas Arnez <arnez@linux.vnet.ibm.com>Ulrich Weigand2-0/+13
* gdb.threads/wp-replication.exp: Stop counting available hardware watchpoints after NR_THREADS iterations.
2013-07-08Add $gdb_prompt to test regexp.Andrew Burgess2-1/+5
http://sourceware.org/ml/gdb-patches/2013-07/msg00173.html * gdb.python/py-explore.exp: Add $gdb_prompt to test regexp.
2013-07-08Fix bug in value_bits_valid.Andrew Burgess2-5/+11
http://sourceware.org/ml/gdb-patches/2013-07/msg00174.html * value.c (value_bits_valid): If the value is not lval_computed or has no check validity handler then the answer is the optimized_out flag, otherwise defer to the handler.
2013-07-08gas/Richard Sandiford7-5/+66
* config/tc-mips.c (mips_ip): Unconditionally parse an expression for 'A' and assume that the constant has been elided if the result is an O_register. gas/testsuite/ * gas/mips/la.s, gas/mips/la.d, gas/mips/la-svr4pic.d, gas/mips/la-xgot.d: Add tests for bracketed addresses.
2013-07-08daily updateAlan Modra1-1/+1
2013-07-07include/opcode/Richard Sandiford31-3920/+3520
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB) (M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB) (M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A) (M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB) (M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB) (M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB) (M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB) (M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB) (M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A) (M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A) (M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB) (M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete. (M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A): Rename to... (M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB) (M_USD_AB): ...these. opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD and SD A(B) macros up. * micromips-opc.c (micromips_opcodes): Likewise. gas/ * config/tc-mips.c (gprel16_reloc_p): New function. (macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are BFD_RELOC_UNUSED. (offset_high_part, small_offset_p): New functions. (nacro): Use them. Remove *_OB and *_DOB cases. For single- register load and store macros, handle the 16-bit offset case first. If a 16-bit offset is not suitable for the instruction we're generating, load it into the temporary register using ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the M_L_DAB code once the address has been constructed. For double load and store macros, again handle the 16-bit offset case first. If the second register cannot be accessed from the same high part as the first, load it into AT using ADDRESS_ADDI_INSN. Fix the handling of LD in cases where the first register is the same as the base. Also handle the case where the offset is not 16 bits and the second register cannot be accessed from the same high part as the first. For unaligned loads and stores, fuse the offbits == 12 and old "ab" handling. Apply this handling whenever the second offset needs a different high part from the first. Construct the offset using ADDRESS_ADDI_INSN where possible, for offbits == 16 as well as offbits == 12. Use offset_reloc when constructing the individual loads and stores. (mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc and offset_reloc before matching against a particular opcode. Handle elided 'A' constants. Allow 'A' constants to use relocation operators. gas/testsuite/ * gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for truncated constants. * gas/mips/ldstla-32-shared.d: Likewise. * gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding 16-bit constants to the base. * gas/mips/micromips@mcu.d: Likewise. * gas/mips/micromips@cache.d: Likewise. * gas/mips/micromips@pref.d: Likewise. * gas/mips/micromips.d, gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise. Allow the full 16-bit offset range to be used for SB, LB and LBU in USH and ULH sequences. Fix the expected output for LD and SD when the two LW and SW offsets need different high parts. * gas/mips/eva.s: Test PREFE with relocation operators. * gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit constants. Update after eva.s change. * gas/mips/micromips@eva.d: Likewise. * gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s, gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d, gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s, gas/mips/ulh-reloc.d: New tests. * gas/mips/mips.exp: Run them.
2013-07-07gas/testsuite/Richard Sandiford3-2868/+2879
* gas/mips/eva.d, gas/mips/micromips@eva.d: Remove hard-coded addresses. Use gpr-names=numeric.
2013-07-07opcodes/Richard Sandiford5-4/+16
* mips16-opc.c: Add entries for argumentless "entry" and "exit" instructions. gas/testsuite/ * gas/mips/mips16.d, gas/mips/mips16-64.d: Remove trailing whitespace from ENTRY and EXIT lines.
2013-07-07include/opcode/Richard Sandiford11-84/+106
* mips.h: Remove documentation of "[" and "]". Update documentation of "k" and the MDMX formats. opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400 MDMX-like instructions. * mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when printing "Q" operands for INSN_5400 instructions. gas/ * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling. (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions. Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions. gas/testsuite/ * gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test. * gas/mips/mips.exp: Run it.
2013-07-07include/opcode/Richard Sandiford7-21/+33
* mips.h: Update documentation of "+s" and "+S". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and "+S" for "cins". * mips-dis.c (print_mips_arg): Update "+s" and "+S" comments. Combine cases. gas/ * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p". Require the msb to be <= 31 for "+s". Check that the size is <= 31 for both "+s" and "+S".
2013-07-07include/opcode/Richard Sandiford9-23/+58
* mips.h: Document "+i". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for "jalx". * mips16-opc.c (mips16_opcodes): Likewise. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_mips16_insn_arg) (print_insn_mips16): Handle "+i". (print_insn_micromips): Likewise. Conditionally preserve the ISA bit for "a" but not for "+i". gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn): (mips_ip, mips16_ip): Handle "+i".
2013-07-07include/opcode/Richard Sandiford7-86/+89
* mips.h: Remove "mi" documentation. Update "mh" documentation. (OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI): Delete. (INSN2_WRITE_GPR_MHI): Rename to... (INSN2_WRITE_GPR_MH): ...this. opcodes/ * micromips-opc.c (WR_mhi): Rename to.. (WR_mh): ...this. (micromips_opcodes): Update "movep" entry accordingly. Replace "mh,mi" with "mh". * mips-dis.c (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (print_micromips_insn): Remove "mi" case. Print both registers in the pair for "mh". gas/ * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete. (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (mips_lookup_reg_pair): New function. (gpr_write_mask, macro): Adjust after above renaming. (validate_micromips_insn): Remove "mi" handling. (mips_ip): Likewise. Parse both registers in a pair for "mh".
2013-07-07include/opcode/Richard Sandiford11-143/+87
* mips.h: Remove documentation of "+D" and "+T". opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D" and "+T" handling. Check for a "0" suffix when deciding whether to use coprocessor 0 names. In that case, also check for ",H" selectors. gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn) (mips_ip): Remove "+D" and "+T" handling. gas/testsuite/ * gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names for LWC0 and SWC0.
2013-07-07gdb/testsuite/Yao Qi5-91/+66
* boards/native-gdbserver.exp: Move invoke of process_multilib_options to gdbserver-base.exp. Move set_board_info 'compiler', 'gdb,noinferiorio', 'gdb,nofileio', 'gdb_server_prog' and 'gdb,predefined_tsv' to gdbserver-base.exp. Move proc ${board}_download, ${board}_upload and ${board}_file to gdbserver-base.exp. * boards/native-extended-gdbserver.exp: Likewise. * boards/native-stdio-gdbserver.exp: Likewise. * boards/gdbserver-base.exp: New file.
2013-07-07daily updateAlan Modra1-1/+1
2013-07-06 top.c (print_gdb_configuration): Explain in output of --configurationEli Zaretskii2-0/+9
what does "relocatable" mean.
2013-07-06Rearrange --help output.Eli Zaretskii2-37/+45
* main.c (print_gdb_help): Regroup options in the --help text. See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for the relevant discussions.
2013-07-06gdb/Yao Qi3-11/+20
* breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>: Remove parameter 'lsal'. * breakpoint.c (create_breakpoint): Move local variable 'lsal' to inner block. Caller update. (base_breakpoint_create_breakpoints_sal): Update. (bkpt_create_breakpoints_sal): Likewise. (tracepoint_create_breakpoints_sal): Likewise. (strace_marker_create_breakpoints_sal): Get 'lsal' from the element 0 of vector 'canonical->sals'.
2013-07-06 * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the realLuis Machado2-2/+8
register number instead of the pseudo register one. (rs6000_dwarf2_reg_to_regnum): Likewise.
2013-07-06 * gdb.base/dump.exp: Remove arch-specific tests and do aLuis Machado2-4/+14
generic data address check to set is64bitonly correctly.
2013-07-06 * gdb.mi/gdb2549.exp (register_tests): Expect any decimal forLuis Machado2-5/+10
the register number instead of expecting only 0.
2013-07-06daily updateAlan Modra1-1/+1
2013-07-05gdb/testsuite/gdb.base/gnu-ifunc-lib.c: Use %function syntax.Will Newton2-1/+6
ARM uses @ as a comment character, but % seems to be usable by all existing ifunc enabled architectures. gdb/testsuite/ChangeLog: 2013-07-05 Will Newton <will.newton@linaro.org> * gdb.base/gnu-ifunc-lib.c: Use %function instead of @function in asm syntax to allow building on ARM.
2013-07-052013-07-05 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-1/+6
* coffcode.h (coff_write_object_contents): Use ".ovrflo" name for overflow sections.
2013-07-052013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>Andreas Krebbel7-0/+110
bfd/ * elf32-s390.c: Rewrite GOT accesses using larl if possible. * elf64-s390.c: Likewise. ld/testsuite/ * ld-s390/gotreloc-1.s: New file. * ld-s390/gotreloc-1.ver: New file. * ld-s390/gotreloc_31-1.dd: New file. * ld-s390/gotreloc_64-1.dd: New file. * ld-s390/s390.exp: Run the new tests. Run 31 bit tests also on 64 bit.
2013-07-052013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>Andreas Krebbel15-18/+217
opcodes/ * s390-opc.c (J12_12, J24_24): New macros. (INSTR_MII_UPI): Rename to INSTR_MII_UPP. (MASK_MII_UPI): Rename to MASK_MII_UPP. * s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction. include/elf/ * s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL. gas/testsuite/ * gas/s390/zarch-zEC12.s: Change bprp second operand and add variants requiring relocations. * gas/s390/zarch-zEC12.d: Likewise. gas/ * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new relocs. bfd/ * elf32-s390.c: Add new relocation definitions R_390_PC12DBL, R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL. (elf_s390_reloc_type_lookup, elf_s390_check_relocs) (elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new relocations. * elf64-s390.c: See elf32-s390.c * bfd-in2.h: Add new relocs to enum bfd_reloc_code_real. * libbfd.h: Add new reloc strings.
2013-07-05gdb/testsuite/Yao Qi5-24/+7
* boards/local-remote-host.exp: Remove obsolete comments. * boards/native-extended-gdbserver.exp: Likewise. * boards/native-gdbserver.exp: Likewise. * boards/native-stdio-gdbserver.exp: Likewise.
2013-07-05daily updateAlan Modra1-1/+1
2013-07-04Use allocate_optimized_out_value instead of set_value_optimized_out.Pedro Alves3-6/+16
Allocate the value as optimized out from the start rather than allocating a value with contents, and then marking it optimized out. gdb/ 2013-07-04 Pedro Alves <palves@redhat.com> * findvar.c (value_of_register): Use allocate_optimized_out_value if the register has been optimized out, instead of set_value_optimized_out. * frame-unwind.c (frame_unwind_got_optimized): Use allocate_optimized_out_value.
2013-07-04value_bits_valid: Fix latent bug.Pedro Alves2-1/+7
Doing something else, I factored out the bits of the value_bits_valid function that actually handle the check_validity hook, and surprisingly found out that the result was misbehaving. Turns out value_bits_valid has a latent bug. If the value is not lval_computed, or doesn't have a check_validity hook, then we should assume the value is entirely valid, not invalid. This is currently masked by the value->optimized_out check -- I ran the testsuite with a gdb_assert(0) inserted in place of that return being touched by the patch, and it never triggers. Tested on x86_64 Fedora 17. gdb/ 2013-07-04 Pedro Alves <palves@redhat.com> * value.c (value_bits_valid): If the value is not lval_computed, or doesn't have a check_validity hook, assume the value is entirely valid.
2013-07-04http://sourceware.org/ml/gdb-patches/2013-07/msg00059.htmlAndrew Burgess7-41/+694
gdb/ChangeLog * stack.c (read_frame_arg): No longer fetch lazy values. * value.c (value_optimized_out): If the value is not already marked optimized out, and is lazy then fetch it. (value_primitive_field): Move optimized out check to later in the function, after we have loaded any lazy values. (value_fetch_lazy): Use optimized out flag directly rather than calling optimized_out method. gdb/testsuite/ChangeLog * gdb.dwarf2/dw2-reg-undefined.exp: New file. * gdb.dwarf2/dw2-reg-undefined.c: Likewise. * gdb.dwarf2/dw2-reg-undefined.S: Likewise.
2013-07-04http://sourceware.org/ml/gdb-patches/2013-07/msg00056.htmlAndrew Burgess3-162/+169
* valops.c: Don't include "user-regs.h". (value_fetch_lazy): Moved to value.c. * value.c: Include "user-regs.h". (value_fetch_lazy): Moved from valops.c.
2013-07-04 * ppc-opc.c (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu.Alan Modra2-0/+10
generated by cgit v1.1 at 2025-01-10 06:40:48 +0000