aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-19Add support for ARM assembler produced by CodeCompositor Studio.Daniel Gutson12-4/+289
* config/tc-arm.c (codecomposer_syntax): New flag that states whether the CCS syntax compatibility mode is on or off. (asmfunc_states): New enum to represent the asmfunc directive state. (asmfunc_state): New variable holding the asmfunc directive state. (comment_chars): Rename to arm_comment_chars. (line_separator_chars): Rename to arm_line_separator_chars. (s_ccs_ref): New function that handles the .ref directive. (asmfunc_debug): New function. (s_ccs_asmfunc): New function that handles the .asmfunc directive. (s_ccs_endasmfunc): New function that handles the .endasmfunc directive. (s_ccs_def): New function that handles the .def directive. (tc_start_label_without_colon): New function. (md_pseudo_table): Added new CCS directives. (arm_ccs_mode): New function that handles the -mccs command line option. (arm_long_opts): Added new -mccs command line option. * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro. (TC_START_LABEL_WITHOUT_COLON): New macro. (tc_start_label_without_colon): Added extern function declaration. (tc_comment_chars): Define. (tc_line_separator_chars): Define. * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined. * read.c (read_begin): Likewise. * doc/as.texinfo: Add documentation for the -mccs command line option. * doc/c-arm.texi: Likewise. * doc/internals.texi: Document tc_line_separator_chars. * NEWS: Mention the new feature. * gas/arm/ccs.s: New test case. * gas/arm/ccs.d: New expected disassembly.
2014-03-19Fix RX linker testsuite failures by making the assembler use conventional ↵Nick Clifton2-0/+10
section names. * config/default.exp (ASFLAGS): For the RX target add: -muse-conventional-section-names.
2014-03-19Fix typo in changelog entry.Nick Clifton1-1/+1
2014-03-19Fix RX gas testsuite failures by accounting for new variations in the ↵Nick Clifton5-953/+970
disassembler's output. * rx-decode.opc (bwl): Allow for bogus instructions with a size field of 3. (sbwl, ubwl, SCALE): Likewise. * rx-decode.c: Regenerate. * gas/rx/mov.d: Update expected disassembly.
2014-03-19Improve .rsrc section merging with better handling of the alignment adjustmentsNick Clifton9-17/+89
made between merged .rsrc sections. * peXXigen.c (rsrc_align): New function. Attempts to cope with alignment variances when .rsrc sections are merged. (rsrc_process_section): Use rsrc_align. * Makefile.am (default-manifest.o): Use WINDRES_FOR_TARGET. * Makefile.in: Regenerate. * emultempl/default-manifest.rc: Fix typo. * scripttempl/pe.sc (R_RSRC): Fix default-manifest exclusion. (.rsrc): Add SUBALIGN(4). * scripttempl/pep.sc: Likewise.
2014-03-18 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.Doug Evans2-7/+14
Fix spelling of exec-done-display.
2014-03-19daily updateAlan Modra1-1/+1
2014-03-18Fix SIGTERM signal safety (PR gdb/15358).Jan Kratochvil7-3/+176
gdb/ 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com> PR gdb/15358 * defs.h (sync_quit_force_run): New declaration. (QUIT): Check also SYNC_QUIT_FORCE_RUN. * event-top.c (async_sigterm_handler): New declaration. (async_sigterm_token): New variable. (async_init_signals): Create also async_sigterm_token. (async_sigterm_handler): New function. (sync_quit_force_run): New variable. (handle_sigterm): Replace quit_force call by other calls. * utils.c (quit): Call quit_force if SYNC_QUIT_FORCE_RUN. gdb/testsuite/ 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com> PR gdb/15358 * gdb.base/gdb-sigterm.c: New file. * gdb.base/gdb-sigterm.exp: New file. Message-ID: <20140316135334.GA30698@host2.jankratochvil.net>
2014-03-18Power: Correct little-endian e500v2 GPR frame offsetsMaciej W. Rozycki2-2/+9
This change corrects GPR frame offset calculation for the e500v2 processor. On this target, featuring the SPE APU, GPRs are 64-bit and are held in stack frames whole with the use of `evstdd' and `evldd' instructions. Their integer 32-bit part occupies the low-order word and therefore its offset varies between the two endiannesses possible. * rs6000-tdep.c (rs6000_frame_cache): Correct little-endian GPR offset into SPE pseudo registers.
2014-03-18PR gdb/13860: make "-exec-foo"'s MI output equal to "foo"'s MI output.Pedro Alves7-63/+98
Part of PR gdb/13860 is about the mi-solib.exp test's output being different in sync vs async modes. sync: >./gdb -nx -q ./testsuite/gdb.mi/solib-main -ex "set stop-on-solib-events 1" -ex "set target-async off" -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main..." ~"done.\n" (gdb) &"start\n" ~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"} ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="17724" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" ~"Stopped due to shared library event (no libraries added or removed)\n" *stopped,reason="solib-event",frame={addr="0x000000379180f990",func="_dl_debug_state",args=[],from="/lib64/ld-linux-x86-64.so.2"},thread-id="1",stopped-threads="all",core="3" (gdb) async: >./gdb -nx -q ./testsuite/gdb.mi/solib-main -ex "set stop-on-solib-events 1" -ex "set target-async on" -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main..." ~"done.\n" (gdb) start &"start\n" ~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"} ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="17729" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" (gdb) *stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="1" For now, let's focus only on the *stopped event. We see that the async output is missing frame info. And this causes a test failure in async mode, as "mi_expect_stop solib-event" wants to see the frame info. However, if we compare the event output when a real MI execution command is used, compared to a CLI command (e.g., run vs -exec-run, next vs -exec-next, etc.), we see: >./gdb -nx -q ./testsuite/gdb.mi/solib-main -ex "set stop-on-solib-events 1" -ex "set target-async off" -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main..." ~"done.\n" (gdb) r &"r\n" ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="17751" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" ~"Stopped due to shared library event (no libraries added or removed)\n" *stopped,reason="solib-event",frame={addr="0x000000379180f990",func="_dl_debug_state",args=[],from="/lib64/ld-linux-x86-64.so.2"},thread-id="1",stopped-threads="all",core="3" (gdb) -exec-run =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1" =library-unloaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",thread-group="i1" =thread-group-started,id="i1",pid="17754" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" *stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="1" =thread-selected,id="1" (gdb) As seen above, with MI commands, the *stopped event _doesn't_ have frame info. This is because normal_stop, as commanded by the result of bpstat_print, skips printing frame info in this case (it's an "event", not a "breakpoint"), and when the interpreter is MI, mi_on_normal_stop skips calling print_stack_frame, as the normal_stop call was already done with the MI uiout. This explains why the async output is different even with a CLI command. Its because in async mode, the mi_on_normal_stop path is always taken; it is always reached with the MI uiout, because the stop is handled from the event loop, instead of from within `proceed -> wait_for_inferior -> normal_stop' with the interpreter overridden, as in sync mode. This patch fixes the issue by making all cases output the same *stopped event, by factoring out the print code from normal_stop, and using it from mi_on_normal_stop as well. I chose the *stopped output without a frame, mainly because that is what you already get if you use MI execution commands, the commands frontends are supposed to use (except when implementing a console). This patch makes it simpler to tweak the MI output differently if desired, as we only have to change the centralized print_stop_event (taking into account whether the uiout is MI-like), and all different modes will change accordingly. Tested on x86_64 Fedora 17, no regressions. The mi-solib.exp test no longer fails in async mode with this patch, so the patch removes the kfail. 2014-03-18 Pedro Alves <palves@redhat.com> PR gdb/13860 * inferior.h (print_stop_event): Declare. * infrun.c (print_stop_event): New, factored out from ... (normal_stop): ... this. * mi/mi-interp.c (mi_on_normal_stop): Use print_stop_event instead of bpstat_print/print_stack_frame. 2014-03-18 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail. * lib/mi-support.exp (mi_expect_stop): Add special handling for solib-event.
2014-03-18Enable verbose error messages by default for AArch64 gas.Yufeng Zhang7-4/+203
gas/ * config/tc-aarch64.c (aarch64_opts): Add new option "mno-verbose-error". (verbose_error_p): Initialize to 1. * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error and -mno-verbose-error. gas/testsuite/ * gas/aarch64/illegal.d: Pass -mno-verbose-error. * gas/aarch64/verbose-error.s: Add more verbose message testcases. * gas/aarch64/verbose-error.l: Ditto.
2014-03-18Convert function declarations to ISO C format. Remove redundant code.Nick Clifton1-99/+60
* wrapper.c: Convert function declarations to ISO C format. (sim_open): Delete code for handling t,d and z command line options.
2014-03-18daily updateAlan Modra1-1/+1
2014-03-17fix latent bugs in ui-out.cTom Tromey2-2/+7
The destructor code in ui-out.c has a latent bug, which is hidden by the fact that nothing uses this right now. This patch fixes the problem. The bug is that we don't always clear a pointer in the ui-out object, leading to a bad free. 2014-03-17 Tom Tromey <tromey@redhat.com> * ui-out.c (clear_table, ui_out_new): Clear uiout->table.id.
2014-03-172014-03-17 Christopher Faylor <me.cygwin2014@cgf.cx>Chris Faylor3-2/+17
* Makefile.am: Use host version of windres. * Makefile.in: Regenerate.
2014-03-17Add support for parsing VFP register names in .cfi_offset directives.Nick Clifton5-8/+48
PR gas/16694 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP registers as well. * gas/cfi/cfi-arm-1.s: Add checks of VFP registers. * gas/cfi/cfi-arm-1.d: Update expected output.
2014-03-17[testsuite/Ada] New testcase for packed array renaming.Joel Brobecker5-0/+111
gdb/testsuite/ChangeLog: * gdb.ada/pckd_arr_ren: New testcase.
2014-03-17[Ada] Crash with references to GNAT packed arrays handlingPierre-Marie de Rodat2-8/+14
Consider the following declarations: type Packed_Array is array (Natural range <>) of Boolean; pragma Pack (Packed_Array); function Make (H, L : Natural) return Packed_Array is begin return (H .. L => False); end Make; A1 : Packed_Array := Make (1, 2); A2 : Packed_Array renames A1; One possible DWARF translation for A2 is: <3><1e4>: Abbrev Number: 21 (DW_TAG_variable) <1e5> DW_AT_name : a2 <1ea> DW_AT_type : <0x1d9> <3><1d9>: Abbrev Number: 22 (DW_TAG_const_type) <1da> DW_AT_type : <0x1de> <3><1de>: Abbrev Number: 23 (DW_TAG_reference_type) <1e0> DW_AT_type : <0x1a3> <3><1a3>: Abbrev Number: 17 (DW_TAG_array_type) <1a4> DW_AT_name : foo__Ta1S___XP1 <1a8> DW_AT_GNAT_descriptive_type: <0x16b> <3><16b>: Abbrev Number: 6 (DW_TAG_typedef) <16c> DW_AT_name : foo__Ta1S <172> DW_AT_type : <0x176> <3><176>: Abbrev Number: 17 (DW_TAG_array_type) <177> DW_AT_name : foo__Ta1S <17b> DW_AT_GNAT_descriptive_type: <0x223> Here, foo__Ta1S___XP1 is the type used for the code generation while foo__Ta1S is the source-level type. Both form a valid GNAT encoding for a packed array type. Trying to print A2 (1) can make GDB crash. This is because A2 is defined as a reference to a GNAT encoding for a packed array. When decoding constrained packed arrays, the ada_coerce_ref subprogram follows references and returns a fixed type from the target type, peeling the GNAT encoding for packed arrays. The remaining code assumes that the resulting type is still such an encoding while we only have a standard GDB array type, hence the crash: arr = ada_coerce_ref (arr); [...] type = decode_constrained_packed_array_type (value_type (arr)); decode_constrained_packed_array_type assumes that its argument is such an encoding. From its front comment: /* The array type encoded by TYPE, where ada_is_constrained_packed_array_type (TYPE). */ This patch simply replaces the call to ada_coerce_ref with a call to coerce_ref in order to avoid prematurely transforming the packed array type as a side-effect. This way, the remaining code will always work with a GNAT encoding. gdb/ChangeLog: * ada-lang.c (decode_constrained_packed_array): Perform a minimal coercion for reference with coerce_ref instead of ada_coerce_ref.
2014-03-17darwin: handle recent version of dyldTristan Gingold2-2/+11
gdb/ * solib-darwin.c (DYLD_VERSION_MAX): Increase value. (darwin_solib_create_inferior_hook): Emit a warning if version is unhandled.
2014-03-17readelf -s test: Skip extra symbols produced by MSP430 assembler.Nick Clifton2-0/+6
* binutils-all/readelf.ss: Add skip of MSP430 defined symbols.
2014-03-17od-macho: dump compact unwind info.Tristan Gingold4-2/+660
binutils/ * od-macho.c (dump_section_header): Renames of dump_section. (dump_segment): Adjust after renaming. (OPT_COMPACT_UNWIND): Define. (options): Add compact unwind. (mach_o_help): Document compact_unwind. (unwind_x86_64_regs, unwind_x86_regs): New arrays. (dump_unwind_encoding_x86, dump_unwind_encoding) (dump_obj_compact_unwind, dump_exe_compact_unwind) (dump_section_content): New functions. (mach_o_dump): Handle compact unwind. include/mach-o/ * unwind.h: New file.
2014-03-17mach-o: handle lasz load dylib command.Tristan Gingold4-0/+12
bfd/ * mach-o.c (bfd_mach_o_read_dylib): Handle lazy load dylib. (bfd_mach_o_read_command): Ditto. binutils/ * od-macho.c (dump_load_command): Handle lazy load dylib.
2014-03-17daily updateAlan Modra1-1/+1
2014-03-16Fix Python 2.4 build breakUlrich Weigand2-1/+7
This fixes a build failure against Python 2.4 by casting away "const" on the second argument to PyObject_GetAttrString. Similar casts to support Python 2.4 were already present in a number of other places. gdb/ 2014-03-16 Ulrich Weigand  <uweigand@de.ibm.com> * python/py-value.c (get_field_flag): Cast flag_name argument to PyObject_GetAttrString to support Python 2.4.
2014-03-16daily updateAlan Modra1-1/+1
2014-03-15daily updateAlan Modra1-1/+1
2014-03-14Step down from being global maintainer.Jan Kratochvil2-2/+5
gdb/ 2014-03-14 Jan Kratochvil <jan.kratochvil@redhat.com> * MAINTAINERS (The Official FSF-appointed GDB Maintainers) (Global Maintainers): Remove Jan Kratochvil.
2014-03-14Check fwrite return codeAnthony Green2-1/+10
2014-03-14Add support for instruction level tracing to the ARM simulator.Nick Clifton7-94/+245
* wrapper.c (op_print): New function. (sim_dis_read): New function. (print_insn): New function - disassembles the given instruction. (sim_trace): Note that tracing is now allowed. (sim_create_inferior): Default to emulating v6. Initialise the disassembler machinery. (sim_target_parse_command_line): Add support for -t -d and -z options. (sim_target_display_usage): Note existence of -d and -z options. (sim_open): Parse -t -d and -z options. * armemu.h: Add exports of trace, disas and trace_funcs. Add prototype for print_insn. * armemu.c (ARMul_Emulate26): Add tracing code. Delete unused variables. * thumbemu (handle_v6_thumb_insn): Delete unused variable Rd. Move Rm variable into switch cases. Add tracing code. * armcopro.c (XScale_cp15_init): Add a return value. (XScale_cp13_init): Likewise. (XScale_cp14_init): Likewise. (XScale_cp15_LDC): Delete unused function. (XScale_cp15_STC): Likewise. * maverick.c: Delete comment inside comment. (DSPInit): Delete unused function. (DSPMCR4): Fix compile time warning about missing parenthesis. (DSPMCR5): Likewise. (DSPCDP6): Delete unused variable opcode2.
2014-03-14Prevent writes to R15 via LDR or LDM from changing the ARM/Thumb state in ↵David McQuillan3-3/+23
pre-v5 architectures. PR sim/8388 * armemu.c (WriteR15Load): New function. Determines if the state can be changed upon a write to R15. (LoadMult): Use WriteR15Load. * armemu.h (WRITEDESTB): Use WriteR15Load.
2014-03-15Correct ld-powerpc/vle-reloc-2 testAlan Modra2-4/+8
* ld-powerpc/vle-reloc-3.d: Remove addresses.
2014-03-14Fix build time problem with MingGW hosts, which do not have a strnlen() ↵Nick Clifton8-4/+36
function. 2014-03-13 Meador Inge <meadori@codesourcery.com> * configure.in: Add strnlen to AC_CHECK_DECLS. * config.in: Regenerate. * configure: Regenerate. * sysdep.h (strnlen): Add prototype. * dwarf.c (strnlen): Move prototype ... * sysdep.h (strnlen): ... to here.
2014-03-14Fix guit.texi CL entry.Joel Brobecker1-1/+1
2014-03-14Fix overflow handling of VLE_SDA21Alan Modra5-7/+20
bfd/ * elf32-ppc.c (ppc_elf_relocate_section): Correct overflow handling for VLE_SDA21 relocs. ld/testsuite/ * ld-powerpc/vle.ld: Place .PPC.EMB.sdata0 within 32k of 0. * ld-powerpc/vle-reloc-3.d: Update.
2014-03-14Remove search path from -l:namespec DT_NEEDEDAlan Modra10-36/+68
For libraries without a soname, -l:libfoo.so set DT_NEEDED to the search dir plus filename, while gold and -lfoo just use the filename. This patch fixes the inconsistency. * ldlang.h (full_name_provided): New input flag. * ldlang.c (new_afile): Don't use lang_input_file_is_search_file_enum for -l:namespec. Instead use lang_input_file_is_l_enum with full_name_provided flag. * ldlfile.c (ldfile_open_file_search): Don't complete lib name if full_name_provided flag is set. * emultempl/elf32.em (gld${EMULATION_NAME}_open_dynamic_archive): Handle full_name_provided libraries. Tidy EXTRA_SHLIB_EXTENSION support. Set DT_NEEDED for -l:namespec as namespec. * emultempl/aix.em (ppc_after_open_output): Handle full_name_provided. * emultempl/linux.em (gld${EMULATION_NAME}_open_dynamic_archive): Don't handle full_name_provided libraries. * emultempl/pe.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto. * emultempl/pep.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto. * emultempl/vms.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
2014-03-14Rename native-only terminal related functions.Pedro Alves7-40/+73
Looking at target_terminal_inferior etc. in async mode, I realized that the naming of the terminal_inferior, terminal_ours, etc. functions doesn't really give a clue that they're meant for the native target only. This patch renames them. There's already child_terminal_info using the child_ prefix, and, they're most prominently installed by inf-child.c, so I went with the child_ prefix. I dropped "inferior" from a couple to make the name match the corresponding target method. Tested on x86_64 Fedora 17, and cross built for mingw. I didn't test gnu-nat.c, but I think the change is as obvious as it gets. I grepped the tree looking for other potential spots that would need adjustment but this is all I found. If something breaks, it should be trivial to fix. gdb/ 2014-03-14 Pedro Alves <palves@redhat.com> * inferior.h (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init_inferior): ... this. (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_inferior_with_pgrp): ... this. * inflow.c (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_with_pgrp): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init): ... this. Adjust. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. Adjust. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_ours_1): Rename to ... (child_terminal_ours_1): ... this. Adjust. * linux-nat.c (linux_nat_terminal_inferior): Adjust. * windows-nat.c (do_initial_windows_stuff): Adjust. * gnu-nat.c (gnu_terminal_init_inferior): Rename to ... (gnu_terminal_init): ... this. Adjust. (gnu_target): Adjust. * inf-child.c (inf_child_target): Adjust.
2014-03-14daily updateAlan Modra1-1/+1
2014-03-13AArch64: Clean up docs and document -mcpu and -march.Richard Earnshaw2-7/+83
2014-03-13 Richard Earnshaw <rearnsha@arm.com> Jiong Wang <Jiong.Wang@arm.com> * doc/c-aarch64.texi: Clean up some formatting issues. (AArch64 Options): Document -mcpu and -march. (AArch64 Extensions): New node.
2014-03-13Fix pr 16612.Doug Evans4-0/+34
* guile/scm-type.c (tyscm_copy_type_recursive): Move type to its new eq?-hashtab. testsuite/ * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage collect after discarding symbols.
2014-03-13Fix segv when referencing a value added to history after a Guile garbage ↵Doug Evans4-1/+20
collect. * value.c (record_latest_value): Call release_value_or_incref instead of release_value. testsuite/ * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added to history survives a gc.
2014-03-13Make the new aarch64 bignum test endian agnostic.Nick Clifton3-4/+9
* gas/aarch64/litpool.s: Make the test endian agnostic. * gas/aarch64/litpool.d: Update expected disassembly.
2014-03-13Rename Solaris's target to "target child" like most other ports.Pedro Alves4-7/+9
Note that "target procfs" is used by QNX, but the test must be failing there, as nto-procfs.c overrides to_open with a method that doesn't throw the error being tested. So I'm just removing the test completely. gdb/ 2014-03-13 Pedro Alves <palves@redhat.com> * procfs.c (procfs_target): Don't override to_shortname, to_longname or to_doc. gdb/testsuite/ 2014-03-13 Pedro Alves <palves@redhat.com> * gdb.base/default.exp: Don't test "target procfs".
2014-03-13Don't mention "Unix" in native target name.Pedro Alves4-5/+15
I find the mention of "Unix" unnecessary (and really slightly a lie) on GNU/Linux in a couple of places: (gdb) maint print target-stack The current target stack is: - multi-thread (multi-threaded child process.) - child (Unix child process) - exec (Local exec file) - None (None) (gdb) help target child Unix child process (started by the "run" command). (gdb) target child Use the "run" command to start a Unix child process. It's also odd that e.g., the Windows port says "Unix" in reaction to "target child" (it was already that way before Windows used inf-child.c): (gdb) target child Use the "run" command to start a Unix child process. (gdb) So drop "Unix", going in the direction of saying mostly the same on all native targets: (gdb) maint print target-stack The current target stack is: - multi-thread (multi-threaded child process.) - - child (Unix child process) + - child (Child process) - exec (Local exec file) - None (None) (gdb) help target child - Unix child process (started by the "run" command). + Child process (started by the "run" command). (gdb) target child -Use the "run" command to start a Unix child process. +Use the "run" command to start a child process. gdb/ 2014-03-13 Pedro Alves <palves@redhat.com> * inf-child.c (inf_child_open, inf_child_target): Don't mention Unix in user visible strings. gdb/testsuite/ 2014-03-13 Pedro Alves <palves@redhat.com> * gdb.base/default.exp: Update "target child" and "target procfs" tests to not expect "Unix".
2014-03-13Add pe/x86_64 bigobj file format.Tristan Gingold24-17/+537
bfd/ * peicode.h (pe_ILF_object_p): Adjust, as the version number has been read. (pe_bfd_object_p): Also read version number to detect ILF. * pe-x86_64.c (COFF_WITH_PE_BIGOBJ): Define. (x86_64pe_bigobj_vec): Define * coffcode.h (bfd_coff_backend_data): Add _bfd_coff_max_nscns field. (bfd_coff_max_nscns): New macro. (coff_compute_section_file_positions): Use unsigned int for target_index. Compare with bfd_coff_max_nscns. (bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table): Set a value for _bfd_coff_max_nscns. (header_bigobj_classid): New constant. (coff_bigobj_swap_filehdr_in, coff_bigobj_swap_filehdr_out) (coff_bigobj_swap_sym_in, coff_bigobj_swap_sym_out) (coff_bigobj_swap_aux_in, coff_bigobj_swap_aux_out): New functions. (bigobj_swap_table): New table. * libcoff.h: Regenerate. * coff-sh.c (bfd_coff_small_swap_table): Likewise. * coff-alpha.c (alpha_ecoff_backend_data): Add value for _bfd_coff_max_nscns. * coff-mips.c (mips_ecoff_backend_data): Likewise. * coff-rs6000.c (bfd_xcoff_backend_data) (bfd_pmac_xcoff_backend_data): Likewise. * coff64-rs6000.c (bfd_xcoff_backend_data) (bfd_xcoff_aix5_backend_data): Likewise. * targets.c (x86_64pe_bigobj_vec): Declare. * configure.in (x86_64pe_bigobj_vec): New vector. * configure: Regenerate. * config.bfd: Add bigobj object format for Windows targets. gas/ * config/tc-i386.c (use_big_obj): Declare. (OPTION_MBIG_OBJ): Define. (md_longopts): Add -mbig-obj option. (md_parse_option): Handle it. (md_show_usage): Display help for this option. (i386_target_format): Use bigobj for x86-64 if -mbig-obj. * doc/c-i386.texi: Document the option. gas/testsuite/ * gas/pe/big-obj.d, gas/pe/big-obj.s: Add test. * gas/pe/pe.exp: Add test. include/coff/ * pe.h (struct external_ANON_OBJECT_HEADER_BIGOBJ): Declare. (FILHSZ_BIGOBJ): Define. (struct external_SYMBOL_EX): Declare. (SYMENT_BIGOBJ, SYMESZ_BIGOBJ): Define. (union external_AUX_SYMBOL_EX): Declare. (AUXENT_BIGOBJ, AUXESZ_BIGOBJ): Define. * internal.h (struct internal_filehdr): Change type of f_nscns.
2014-03-12Doxygenate gdbtypes.hStan Shebs4-350/+460
2014-03-13daily updateAlan Modra1-1/+1
2014-03-12Factor out foreground/background execution command preparation.Pedro Alves2-136/+61
All execution commands currently have this pattern: /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution. */ async_disable_stdin (); } This patch factors that into a shared function. attach_command installs a cleanup to re-enable stdin, but that's not necessary, as per the comment in prepare_execution_command. In any case, if someday it turns out necessary, we have a single place to install it now. Tested on x86_64 Fedora 17, sync and async modes. gdb/ 2014-03-12 Pedro Alves <palves@redhat.com> * infcmd.c (prepare_execution_command): New function, factored out from several execution commands. (run_command_1, continue_command, step_1, jump_command) (signal_command, until_command, advance_command, finish_command) (attach_command): Use prepare_execution_command.
2014-03-13Support for HWbreak/watchpoint across fork/vfork on arm-nativeOmair Javaid2-125/+305
This patch updates arm native support for hwbreak-/watchpoints to enable support for hwbreak-/watchpoints across fork/vfork. This involves changes to hwbreak-/watchpoint insertion mechanism to the modern way, by marking debug registers as needing update, but only really updating them on resume, which is necessary for supporting watchpoints in non-stop mode. This also updates a previously maintained per thread hwbreak-/watchpoint cache to a per process cache which allows target specific code to come in sync with gdb-linux calls to threads create/destroy and process fork/exit hooks.
2014-03-12Make 'make check TESTS="..."' work from GDB's build dir.Pedro Alves2-1/+6
I noticed 'make check TESTS="..."' works when ran from gdb/testsuite/, but TESTS is ignored when "make check" is ran from gdb/. The issue is that TESTS isn't being passed to the testsuite subdir make invocation. gdb/ 2014-03-12 Pedro Alves <palves@redhat.com> * Makefile.in (TARGET_FLAGS_TO_PASS): Add TESTS.
2014-03-12fix regressions with target-asyncTom Tromey14-274/+325
A patch in the target cleanup series caused a regression when using record with target-async. Version 4 of the patch is here: https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html The immediate problem is that record supplies to_can_async_p and to_is_async_p methods, but does not supply a to_async method. So, when target-async is set, record claims to support async -- but if the underlying target does not support async, then the to_async method call will end up in that method's default implementation, namely tcomplain. This worked previously because the record target used to provide a to_async method; one that (erroneously, only at push time) checked the other members of the target stack, and then simply dropped to_async calls in the "does not implement async" case. My first thought was to simply drop tcomplain as the default for to_async. This works, but Pedro pointed out that the only reason record has to supply to_can_async_p and to_is_async_p is that these default to using the find_default_run_target machinery -- and these defaults are only needed by "run" and "attach". So, a nicer solution presents itself: change run and attach to explicitly call into the default run target when needed; and change to_is_async_p and to_can_async_p to default to "return 0". This makes the target stack simpler to use and lets us remove the method implementations from record. This is also in harmony with other plans for the target stack; namely trying to reduce the impact of find_default_run_target. This approach makes it clear that find_default_is_async_p is not needed -- it is asking whether a target that may not even be pushed is actually async, which seems like a nonsensical question. While an improvement, this approach proved to introduce the same bug when using the core target. Looking a bit deeper, the issue is that code in "attach" and "run" may need to use either the current target stack or the default run target -- but different calls into the target API in those functions could wind up querying different targets. This new patch makes the target to use more explicit in "run" and "attach". Then these commands explicitly make the needed calls against that target. This ensures that a single target is used for all relevant operations. This lets us remove a couple find_default_* functions from various targets, including the dummy target. I think this is a decent understandability improvement. One issue I see with this patch is that the new calls in "run" and "attach" are not very much like the rest of the target API. I think fundamentally this is due to bad factoring in the target API, which may need to be fixed for multi-target. Tackling that seemed ambitious for a regression fix. While working on this I noticed that there don't seem to be any test cases that involve both target-async and record, so this patch changes break-precsave.exp to add some. It also changes corefile.exp to add some target-async tests; these pass with current trunk and with this patch applied, but fail with the v1 patch. This patch differs from v4 in that it moves initialization of to_can_async_p and to_supports_non_stop into inf-child, adds some assertions to complete_target_initialization, and adds some comments to target.h. Built and regtested on x86-64 Fedora 20. 2014-03-12 Tom Tromey <tromey@redhat.com> * inf-child.c (return_zero): New function. (inf_child_target): Set to_can_async_p, to_supports_non_stop. * aix-thread.c (aix_thread_inferior_created): New function. (aix_thread_attach): Remove. (init_aix_thread_ops): Don't set to_attach. (_initialize_aix_thread): Register inferior_created observer. * corelow.c (init_core_ops): Don't set to_attach or to_create_inferior. * exec.c (init_exec_ops): Don't set to_attach or to_create_inferior. * infcmd.c (run_command_1): Use find_run_target. Make direct target calls. (attach_command): Use find_attach_target. Make direct target calls. * record-btrace.c (init_record_btrace_ops): Don't set to_create_inferior. * record-full.c (record_full_can_async_p, record_full_is_async_p): Remove. (init_record_full_ops, init_record_full_core_ops): Update. Don't set to_create_inferior. * target.c (complete_target_initialization): Add assertion. (target_create_inferior): Remove. (find_default_attach, find_default_create_inferior): Remove. (find_attach_target, find_run_target): New functions. (find_default_is_async_p, find_default_can_async_p) (target_supports_non_stop, target_attach): Remove. (init_dummy_target): Don't set to_create_inferior or to_supports_non_stop. * target.h (struct target_ops) <to_attach>: Add comment. Remove TARGET_DEFAULT_FUNC. <to_create_inferior>: Add comment. <to_can_async_p, to_is_async_p, to_supports_non_stop>: Use TARGET_DEFAULT_RETURN. <to_can_async_p, to_supports_non_stop, to_can_run>: Add comments. (find_attach_target, find_run_target): Declare. (target_create_inferior): Remove. (target_has_execution_1): Update comment. (target_supports_non_stop): Remove. * target-delegates.c: Rebuild. 2014-03-12 Tom Tromey <tromey@redhat.com> * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach): New procs. Add target-async tests. * gdb.reverse/break-precsave.exp (precsave_tests): New proc. Add target-async tests.