diff options
Diffstat (limited to 'opcodes')
| -rw-r--r-- | opcodes/ChangeLog | 29 | ||||
| -rw-r--r-- | opcodes/Makefile.in | 89 | ||||
| -rwxr-xr-x | opcodes/configure | 85 | ||||
| -rw-r--r-- | opcodes/configure.in | 68 |
4 files changed, 244 insertions, 27 deletions
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 0ffc548..75625d5 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,3 +1,32 @@ +Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com> + + Support for building as a shared library, based on patches from + Alan Modra <alan@spri.levels.unisa.edu.au>: + * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib. + New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC, + SHLIB_CFLAGS, COMMON_SHLIB, SHLINK. + * configure: Rebuild. + * Makefile.in (ALLLIBS): New variable. + (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables. + (COMMON_SHLIB, SHLINK): New variables. + (.c.o): If PICFLAG is set, compile twice, once PIC, once normal. + (STAGESTUFF): Remove variable. + (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB). + (stamp-piclist, piclist): New targets. + ($(SHLIB), $(SHLINK)): New targets. + ($(OFILES)): Depend upon stamp-picdir. + (disassemble.o): Build twice if PICFLAG is set. + (MOSTLYCLEAN): Add pic/*.o. + (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist. + (distclean): Remove pic and stamp-picdir. + (install): Install shared libraries. + (stamp-picdir): New target. + +Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com> + + * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support. + Print unknown instruction as "unknown", rather than in hex. + Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com> * dis-buf.c: Include "sysdep.h" before "dis-asm.h". diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in index e00011c..9972393 100644 --- a/opcodes/Makefile.in +++ b/opcodes/Makefile.in @@ -51,16 +51,23 @@ AR = @AR@ AR_FLAGS = rc CC = @CC@ CFLAGS = @CFLAGS@ -BISON = bison MAKEINFO = makeinfo RANLIB = @RANLIB@ +ALLLIBS = @ALLLIBS@ + +PICFLAG = @PICFLAG@ +SHLIB = @SHLIB@ +SHLIB_CC = @SHLIB_CC@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +COMMON_SHLIB = @COMMON_SHLIB@ +SHLINK = @SHLINK@ + INCDIR = $(srcdir)/../include BFDDIR = $(srcdir)/../bfd CSEARCH = -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) DEP = mkdep - TARGETLIB = libopcodes.a # To circumvent a Sun make VPATH bug, each file listed here @@ -87,21 +94,20 @@ FLAGS_TO_PASS = \ "MAKEINFO=$(MAKEINFO)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ - "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ - "BISON=$(BISON)" + "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" ALL_CFLAGS = $(CSEARCH) @HDEFINES@ $(CFLAGS) .c.o: + if [ -n "$(PICFLAG)" ]; then \ + $(CC) -c $(PICFLAG) $(ALL_CFLAGS) $< -o pic/$@; \ + else true; fi $(CC) -c $(ALL_CFLAGS) $< # C source files that correspond to .o's. CFILES = i386-dis.c z8k-dis.c m68k-dis.c mips-dis.c ns32k-dis.c ppc-dis.c -STAGESTUFF = $(TARGETLIB) $(OFILES) - -all: $(TARGETLIB) - +all: $(ALLLIBS) .NOEXPORT: @@ -120,7 +126,43 @@ $(TARGETLIB): $(OFILES) $(AR) $(AR_FLAGS) $(TARGETLIB) $(OFILES) $(RANLIB) $(TARGETLIB) +stamp-piclist: Makefile + rm -f tpiclist + if [ -n "$(PICFLAG)" ]; then \ + echo $(OFILES) | sed -e 's,\([^ ][^ ]*\),pic/\1,g' > tpiclist; \ + else \ + echo $(OFILES) > tpiclist; \ + fi + $(srcdir)/../move-if-change tpiclist piclist + touch stamp-piclist + +piclist: stamp-piclist ; @true + +$(SHLIB): stamp-picdir $(OFILES) piclist + rm -f $(SHLIB) + if [ "$(COMMON_SHLIB)" != "yes" ]; then \ + $(SHLIB_CC) $(SHLIB_CFLAGS) -o $(SHLIB) `cat piclist`; \ + else \ + lobjs=`cat ../libiberty/required-list ../libiberty/needed-list`; \ + if [ -n "$(PICFLAG)" ]; then \ + lobjs=`echo $$lobjs | sed -e 's,\([^ ][^ ]*\),pic/\1,g'`; \ + fi; \ + lobjs=`echo $$lobjs | sed -e 's,\([^ ][^ ]*\),../libiberty/\1,g'`; \ + $(SHLIB_CC) $(SHLIB_CFLAGS) -o $(SHLIB) \ + `sed -e 's,\([^ ][^ ]*\),../bfd/\1,g' ../bfd/piclist` \ + `cat piclist` $$lobjs; \ + fi + +$(SHLINK): $(SHLIB) + rm -f $(SHLINK) + ln -sf `echo $(SHLIB) | sed -e 's,^\.\./bfd/,,'` $(SHLINK) + +$(OFILES): stamp-picdir + disassemble.o: disassemble.c $(INCDIR)/dis-asm.h + if [ -n "$(PICFLAG)" ]; then \ + $(CC) -c @archdefs@ $(PICFLAG) $(ALL_CFLAGS) $(srcdir)/disassemble.c -o pic/disassemble.o; \ + else true; fi $(CC) -c @archdefs@ $(ALL_CFLAGS) $(srcdir)/disassemble.c a29k-dis.o: a29k-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/a29k.h @@ -152,14 +194,15 @@ tags etags: TAGS TAGS: force etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c -MOSTLYCLEAN = *.o core *.E *.p *.ip config.log +MOSTLYCLEAN = *.o core *.E *.p *.ip config.log pic/*.o mostlyclean: rm -rf $(MOSTLYCLEAN) clean: - rm -f *.a $(MOSTLYCLEAN) + rm -f *.a $(MOSTLYCLEAN) $(SHLIB) $(SHLINK) piclist stamp-piclist distclean: clean - rm -rf Makefile config.status TAGS config.cache config.h -clobber realclean: distclean + rm -rf Makefile config.status TAGS config.cache config.h stamp-h \ + pic stamp-picdir +clobber realclean maintainer-clean: distclean # Mark everything as depending on config.status, since the timestamp on # sysdep.h might actually move backwards if we reconfig and relink it @@ -184,9 +227,20 @@ roll: # force: -install: - $(INSTALL_DATA) $(TARGETLIB) $(libdir)/libopcodes.a - $(RANLIB) $(libdir)/libopcodes.a +install: $(ALLLIBS) + for f in $(ALLLIBS); do \ + bf=`echo $$f | sed -e 's,^\.\./bfd/,,'`; \ + rm -f $(libdir)/$$bf; \ + if [ "$$f" = "$(SHLINK)" ]; then \ + ln -sf `echo $(SHLIB) | sed -e 's,^\.\./bfd/,,'` $(libdir)/$$bf; \ + elif [ "$$f" = "$(SHLIB)" ]; then \ + $(INSTALL_PROGRAM) $$f $(libdir)/$$bf; \ + else \ + $(INSTALL_DATA) $$f $(libdir)/$$bf; \ + $(RANLIB) $(libdir)/$$bf; \ + chmod a-x $(libdir)/$$bf; \ + fi; \ + done Makefile: Makefile.in config.status CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status @@ -201,6 +255,11 @@ config.status : configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/confi dep: $(CFILES) mkdep $(CFLAGS) $? +stamp-picdir: + if [ -n "$(PICFLAG)" ] && [ ! -d pic ]; then \ + mkdir pic; \ + else true; fi + touch stamp-picdir # What appears below is generated by a hacked mkdep using gcc -MM. diff --git a/opcodes/configure b/opcodes/configure index b73a75c..f3bea80 100755 --- a/opcodes/configure +++ b/opcodes/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.6 +# Generated automatically using autoconf version 2.7 # Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -13,6 +13,10 @@ ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-targets alternative target configurations" +ac_help="$ac_help + --enable-shared build shared opcodes library" +ac_help="$ac_help + --enable-commonbfdlib build shared BFD/opcodes/libiberty library" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -332,7 +336,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.6" + echo "configure generated by autoconf version 2.7" exit 0 ;; -with-* | --with-*) @@ -545,6 +549,24 @@ if test "${enable_targets+set}" = set; then *) enable_targets=$enableval ;; esac fi +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + case "${enableval}" in + yes) shared=true ;; + no) shared=false ;; + *) { echo "configure: error: bad value ${enableval} for opcodes shared option" 1>&2; exit 1; } ;; +esac +fi +# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. +if test "${enable_commonbfdlib+set}" = set; then + enableval="$enable_commonbfdlib" + case "${enableval}" in + yes) commonbfdlib=true ;; + no) commonbfdlib=false ;; + *) { echo "configure: error: bad value ${enableval} for opcodes commonbfdlib option" 1>&2; exit 1; } ;; +esac +fi @@ -659,6 +681,22 @@ fi # host-specific stuff: +ALLIBS='$(TARGETLIB)' +PICFLAG= +SHLIB= +SHLINK= +if test "${shared}" = "true"; then + ALLLIBS='$(TARGETLIB) $(SHLIB) $(SHLINK)' + PICFLAG=-fpic + if test "${commonbfdlib}" = "true"; then + SHLIB=../bfd/libbfd.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/../bfd/VERSION` + SHLINK=../bfd/libbfd.so + else + SHLIB=libopcodes.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/../bfd/VERSION` + SHLINK=libopcodes.so + fi +fi + . ${srcdir}/../bfd/configure.host # Extract the first word of "gcc", so it can be a program name with args. @@ -854,6 +892,28 @@ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +if test "${shared}" = "true"; then + if test "${GCC}" != "yes" && test "${shared_non_gcc}" != "yes"; then + echo "configure: warning: opcodes --enable-shared only supported when using gcc" 1>&2 + shared=false + PICFLAG= + SHLIB= + fi +fi + + + + + + +if test "${commonbfdlib}" = "true"; then + COMMON_SHLIB=yes +else + COMMON_SHLIB= +fi + + + echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then @@ -869,7 +929,7 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 873 "configure" +#line 933 "configure" #include "confdefs.h" #include <assert.h> Syntax Error @@ -883,7 +943,7 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 887 "configure" +#line 947 "configure" #include "confdefs.h" #include <assert.h> Syntax Error @@ -916,7 +976,7 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 920 "configure" +#line 980 "configure" #include "confdefs.h" #include <$ac_hdr> EOF @@ -1129,7 +1189,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.6" + echo "$CONFIG_STATUS generated by autoconf version 2.7" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1141,10 +1201,12 @@ ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF # Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@CFLAGS@%$CFLAGS%g @@ -1189,6 +1251,13 @@ s%@AR@%$AR%g s%@RANLIB@%$RANLIB%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@ALLLIBS@%$ALLLIBS%g +s%@PICFLAG@%$PICFLAG%g +s%@SHLIB@%$SHLIB%g +s%@SHLIB_CC@%$SHLIB_CC%g +s%@SHLIB_CFLAGS@%$SHLIB_CFLAGS%g +s%@COMMON_SHLIB@%$COMMON_SHLIB%g +s%@SHLINK@%$SHLINK%g s%@CPP@%$CPP%g s%@archdefs@%$archdefs%g s%@BFD_MACHINES@%$BFD_MACHINES%g diff --git a/opcodes/configure.in b/opcodes/configure.in index 1ef7c5d..f68f098 100644 --- a/opcodes/configure.in +++ b/opcodes/configure.in @@ -26,6 +26,20 @@ AC_ARG_ENABLE(targets, no) enable_targets= ;; *) enable_targets=$enableval ;; esac])dnl +AC_ARG_ENABLE(shared, +[ --enable-shared build shared opcodes library], +[case "${enableval}" in + yes) shared=true ;; + no) shared=false ;; + *) AC_MSG_ERROR([bad value ${enableval} for opcodes shared option]) ;; +esac])dnl +AC_ARG_ENABLE(commonbfdlib, +[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library], +[case "${enableval}" in + yes) commonbfdlib=true ;; + no) commonbfdlib=false ;; + *) AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;; +esac])dnl AC_CONFIG_HEADER(config.h:config.in) @@ -37,16 +51,57 @@ fi # host-specific stuff: +ALLIBS='$(TARGETLIB)' +PICFLAG= +SHLIB= +SHLINK= +if test "${shared}" = "true"; then + ALLLIBS='$(TARGETLIB) $(SHLIB) $(SHLINK)' + PICFLAG=-fpic + if test "${commonbfdlib}" = "true"; then +changequote(,)dnl + SHLIB=../bfd/libbfd.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/../bfd/VERSION` +changequote([,])dnl + SHLINK=../bfd/libbfd.so + else +changequote(,)dnl + SHLIB=libopcodes.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/../bfd/VERSION` +changequote([,])dnl + SHLINK=libopcodes.so + fi +fi + . ${srcdir}/../bfd/configure.host AC_PROG_CC AC_SUBST(CFLAGS) AC_SUBST(HDEFINES) -AR=${AR-ar} -AC_SUBST(AR) +AC_CHECK_PROG(AR, ar, ar, :) AC_PROG_RANLIB AC_PROG_INSTALL +if test "${shared}" = "true"; then + if test "${GCC}" != "yes" && test "${shared_non_gcc}" != "yes"; then + AC_MSG_WARN([opcodes --enable-shared only supported when using gcc]) + shared=false + PICFLAG= + SHLIB= + fi +fi + +AC_SUBST(ALLLIBS) +AC_SUBST(PICFLAG) +AC_SUBST(SHLIB) +AC_SUBST(SHLIB_CC) +AC_SUBST(SHLIB_CFLAGS) +if test "${commonbfdlib}" = "true"; then + COMMON_SHLIB=yes +else + COMMON_SHLIB= +fi +AC_SUBST(COMMON_SHLIB) +AC_SUBST(SHLINK) + AC_CHECK_HEADERS(string.h strings.h) # target-specific stuff: @@ -90,11 +145,13 @@ if test x${all_targets} = xfalse ; then archdefs="$archdefs -DARCH_$ad" case "$arch" in bfd_a29k_arch) ta="$ta a29k-dis.o" ;; + bfd_alliant_arch) ;; bfd_alpha_arch) ta="$ta alpha-dis.o" ;; # start-sanitize-arc bfd_arc_arch) ta="$ta arc-dis.o arc-opc.o" ;; # end-sanitize-arc bfd_arm_arch) ta="$ta arm-dis.o" ;; + bfd_convex_arch) ;; bfd_h8300_arch) ta="$ta h8300-dis.o" ;; bfd_h8500_arch) ta="$ta h8500-dis.o" ;; bfd_hppa_arch) ta="$ta hppa-dis.o" ;; @@ -106,16 +163,19 @@ if test x${all_targets} = xfalse ; then bfd_mips_arch) ta="$ta mips-dis.o mips-opc.o" ;; bfd_ns32k_arch) ta="$ta ns32k-dis.o" ;; bfd_powerpc_arch) ta="$ta ppc-dis.o ppc-opc.o" ;; + bfd_pyramid_arch) ;; + bfd_romp_arch) ;; bfd_rs6000_arch) ta="$ta ppc-dis.o ppc-opc.o" ;; - bfd_sh_arch) ta="$ta sh-dis.o" ;; # start-sanitize-rce bfd_rce_arch) ta="$ta rce-dis.o" ;; # end-sanitize-rce + bfd_sh_arch) ta="$ta sh-dis.o" ;; bfd_sparc_arch) ta="$ta sparc-dis.o sparc-opc.o" ;; + bfd_tahoe_arch) ;; bfd_vax_arch) ;; + bfd_w65_arch) ta="$ta w65-dis.o" ;; bfd_we32k_arch) ;; bfd_z8k_arch) ta="$ta z8k-dis.o" ;; - bfd_w65_arch) ta="$ta w65-dis.o" ;; "") ;; *) AC_MSG_ERROR(*** unknown target architecture $arch) ;; |