diff options
Diffstat (limited to 'opcodes/aclocal.m4')
| -rw-r--r-- | opcodes/aclocal.m4 | 199 |
1 files changed, 105 insertions, 94 deletions
diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4 index 82c7e53..d38c985 100644 --- a/opcodes/aclocal.m4 +++ b/opcodes/aclocal.m4 @@ -163,11 +163,17 @@ case "$host" in # On SCO OpenServer 5, we need -belf to get full-featured binaries. CFLAGS="$CFLAGS -belf" ;; + +*-*-cygwin32*) + AM_SYS_LIBTOOL_CYGWIN32 + ;; + esac # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ +DLLTOOL="$DLLTOOL" AS="$AS" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) @@ -257,7 +263,9 @@ if test "$ac_cv_prog_gcc" = yes; then ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. +changequote(,)dnl /* | [A-Za-z]:\\*) +changequote([,])dnl test -z "$LD" && LD="$ac_prog" ;; "") @@ -320,11 +328,7 @@ fi]) AC_DEFUN(AM_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, -[case "$NM" in -/* | [A-Za-z]:\\*) - ac_cv_path_NM="$NM" # Let the user override the test with a path. - ;; -*) +[if test -z "$NM"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do test -z "$ac_dir" && ac_dir=. @@ -344,13 +348,20 @@ AC_CACHE_VAL(ac_cv_path_NM, done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm - ;; -esac]) +else + ac_cv_path_NM="$NM" # Let the user override the test with a path. +fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) +# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 +AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +AC_CHECK_TOOL(AS, as, false) +]) + # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, @@ -374,6 +385,93 @@ for am_file in <<$1>>; do done<<>>dnl>>) changequote([,]))]) +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + if test $USE_MAINTAINER_MODE = yes; then + MAINT= + else + MAINT='#M#' + fi + AC_SUBST(MAINT)dnl +] +) + +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + +dnl AM_CYGWIN32() +AC_DEFUN(AM_CYGWIN32, +[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32, +[AC_TRY_COMPILE(,[return __CYGWIN32__;], +am_cv_cygwin32=yes, am_cv_cygwin32=no) +rm -f conftest*]) +CYGWIN32= +test "$am_cv_cygwin32" = yes && CYGWIN32=yes]) + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + +dnl AM_EXEEXT() +dnl This knows we add .exe if we're building in the Cygwin32 +dnl environment. But if we're not, then it compiles a test program +dnl to see if there is a suffix for executables. +AC_DEFUN(AM_EXEEXT, +[AC_REQUIRE([AM_CYGWIN32]) +AC_REQUIRE([AM_MINGW32]) +AC_MSG_CHECKING([for executable suffix]) +AC_CACHE_VAL(am_cv_exeext, +[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext= +for file in am_c_test.*; do + case $file in + *.c) ;; + *.o) ;; + *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;; + esac +done +rm -f am_c_test*]) +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +AC_MSG_RESULT(${am_cv_exeext}) +AC_SUBST(EXEEXT)]) + +# Check to see if we're running under Mingw, without using +# AC_CANONICAL_*. If so, set output variable MINGW32 to "yes". +# Otherwise set it to "no". + +dnl AM_MINGW32() +AC_DEFUN(AM_MINGW32, +[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32, +[AC_TRY_COMPILE(,[return __MINGW32__;], +am_cv_mingw32=yes, am_cv_mingw32=no) +rm -f conftest*]) +MINGW32= +test "$am_cv_mingw32" = yes && MINGW32=yes]) + # This file is derived from `gettext.m4'. The difference is that the # included macros assume Cygnus-style source and build trees. @@ -717,90 +815,3 @@ AC_DEFUN(AM_LC_MESSAGES, fi fi]) -# Add --enable-maintainer-mode option to configure. -# From Jim Meyering - -# serial 1 - -AC_DEFUN(AM_MAINTAINER_MODE, -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT($USE_MAINTAINER_MODE) - if test $USE_MAINTAINER_MODE = yes; then - MAINT= - else - MAINT='#M#' - fi - AC_SUBST(MAINT)dnl -] -) - -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - -dnl AM_CYGWIN32() -AC_DEFUN(AM_CYGWIN32, -[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32, -[AC_TRY_COMPILE(,[return __CYGWIN32__;], -am_cv_cygwin32=yes, am_cv_cygwin32=no) -rm -f conftest*]) -CYGWIN32= -test "$am_cv_cygwin32" = yes && CYGWIN32=yes]) - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - -dnl AM_EXEEXT() -dnl This knows we add .exe if we're building in the Cygwin32 -dnl environment. But if we're not, then it compiles a test program -dnl to see if there is a suffix for executables. -AC_DEFUN(AM_EXEEXT, -[AC_REQUIRE([AM_CYGWIN32]) -AC_REQUIRE([AM_MINGW32]) -AC_MSG_CHECKING([for executable suffix]) -AC_CACHE_VAL(am_cv_exeext, -[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext= -for file in am_c_test.*; do - case $file in - *.c) ;; - *.o) ;; - *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;; - esac -done -rm -f am_c_test*]) -test x"${am_cv_exeext}" = x && am_cv_exeext=no -fi -EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -AC_MSG_RESULT(${am_cv_exeext}) -AC_SUBST(EXEEXT)]) - -# Check to see if we're running under Mingw, without using -# AC_CANONICAL_*. If so, set output variable MINGW32 to "yes". -# Otherwise set it to "no". - -dnl AM_MINGW32() -AC_DEFUN(AM_MINGW32, -[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32, -[AC_TRY_COMPILE(,[return __MINGW32__;], -am_cv_mingw32=yes, am_cv_mingw32=no) -rm -f conftest*]) -MINGW32= -test "$am_cv_mingw32" = yes && MINGW32=yes]) - |