diff options
Diffstat (limited to 'opcodes/aclocal.m4')
| -rw-r--r-- | opcodes/aclocal.m4 | 213 |
1 files changed, 135 insertions, 78 deletions
diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4 index fb24ab8..1ac998a 100644 --- a/opcodes/aclocal.m4 +++ b/opcodes/aclocal.m4 @@ -1,4 +1,14 @@ -dnl aclocal.m4 generated automatically by aclocal 1.2 +dnl aclocal.m4 generated automatically by aclocal 1.2e + +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. sinclude(../bfd/acinclude.m4) @@ -24,8 +34,8 @@ fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) -AM_SANITY_CHECK -AC_ARG_PROGRAM +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) @@ -33,7 +43,7 @@ AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -AC_PROG_MAKE_SET]) +AC_REQUIRE([AC_PROG_MAKE_SET])]) # serial 1 @@ -60,10 +70,21 @@ echo timestamp > conftestfile # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "$@" = "X"; then + if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + test "[$]2" = conftestfile ) then @@ -93,91 +114,56 @@ fi AC_SUBST($1)]) -# serial 18 AM_PROG_LIBTOOL +# serial 24 AM_PROG_LIBTOOL AC_DEFUN(AM_PROG_LIBTOOL, -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_RANLIB]) -AC_REQUIRE([AC_PROG_CC]) -AC_REQUIRE([AM_PROG_LD]) -AC_REQUIRE([AM_PROG_NM]) -AC_REQUIRE([AC_PROG_LN_S]) - +[AC_REQUIRE([AM_ENABLE_SHARED])dnl +AC_REQUIRE([AM_ENABLE_STATIC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_RANLIB])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AM_PROG_LD])dnl +AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +dnl # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL) - -dnl CYGNUS LOCAL arguments to enable-shared -dnl Allow the --disable-shared flag to stop us from building shared libs. -AC_ARG_ENABLE(shared, -[ --enable-shared build shared libraries [default=yes]], -[p=${PACKAGE-bogus-package-name} - case "$enableval" in - yes) libtool_enable_shared=yes ;; - no) libtool_enable_shared=no ;; - # The value of $p (aka $PACKAGE) is assumed to come from AM_INIT_AUTOMAKE. - # If it didn't, it'll be `bogus-package-name', thus making this condition - # not be used. - *$p*) libtool_enable_shared=yes ;; - *) libtool_enable_shared=no ;; -esac]) -test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared" -libtool_shared= -test "$enable_shared" = no && libtool_shared=" --disable-shared" -dnl END CYGNUS LOCAL - -dnl Allow the --disable-static flag to stop us from building static libs. -AC_ARG_ENABLE(static, -[ --enable-static build static libraries [default=yes]], -[if test "$enableval" = no; then - libtool_enable_static=no -else - libtool_enable_static=yes -fi]) -test -n "$libtool_enable_static" && enable_static="$libtool_enable_static" -libtool_static= -test "$enable_static" = no && libtool_static=" --disable-static" +AC_SUBST(LIBTOOL)dnl -libtool_flags="$libtool_shared$libtool_static" +# Check for any special flags to pass to ltconfig. +libtool_flags= +test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" +test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" # Some flags need to be propagated to the compiler or linker for good # libtool support. -[case "$host" in +case "$host" in *-*-irix6*) - ac_save_CFLAGS="$CFLAGS" - flag_passed=no - for f in -32 -64 -n32 ABI -cckr -mips1 -mips2 -mips3 -mips4; do - case "$f" in - ABI) - test -n "$SGI_ABI" && flag_passed=yes - if test "$flag_passed" = no && test "$ac_cv_prog_gcc" = yes; then - # Choose the ABI flag according to GCC's specs. - if $CC -dumpspecs 2>&1 | sed '/^\*link:$/,/^$/!d' | egrep -e '[ ]-32' >/dev/null; then - LD="${LD-ld} -32" - else - LD="${LD-ld} -n32" - fi - fi + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LD="${LD-ld} -32" ;; - - *) - if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then - flag_passed=yes - LD="${LD-ld} $f" - fi + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" ;; esac - done - CFLAGS="$ac_save_CFLAGS" + fi + rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. CFLAGS="$CFLAGS -belf" ;; -esac] +esac # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ @@ -187,6 +173,77 @@ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) ]) +# AM_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AM_ENABLE_SHARED[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AM_ENABLE_SHARED, +[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(shared, +changequote(<<, >>)dnl +<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT] +changequote([, ])dnl +[ --enable-shared=PKGS only build shared libraries if the current package + appears as an element in the PKGS list], +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl +]) + +# AM_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AM_DISABLE_SHARED, +[AM_ENABLE_SHARED(no)]) + +# AM_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AM_DISABLE_STATIC, +[AM_ENABLE_STATIC(no)]) + +# AM_ENABLE_STATIC - implement the --enable-static flag +# Usage: AM_ENABLE_STATIC[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AM_ENABLE_STATIC, +[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(static, +changequote(<<, >>)dnl +<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT] +changequote([, ])dnl +[ --enable-static=PKGS only build shared libraries if the current package + appears as an element in the PKGS list], +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_static=AM_ENABLE_STATIC_DEFAULT)dnl +]) + + # AM_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AM_PROG_LD, [AC_ARG_WITH(gnu-ld, @@ -200,7 +257,7 @@ if test "$ac_cv_prog_gcc" = yes; then ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. - /*) + /* | [A-Za-z]:\\*) test -z "$LD" && LD="$ac_prog" ;; "") @@ -264,20 +321,20 @@ AC_DEFUN(AM_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [case "$NM" in -/*) +/* | [A-Za-z]:\\*) ac_cv_path_NM="$NM" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do - test -z "$ac_dir" && dir=. + test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1!d' prevents false positives on HP-UX, which says: + # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -B" - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -p" else ac_cv_path_NM="$ac_dir/nm" @@ -365,8 +422,8 @@ AC_DEFUN(AM_EXEEXT, [AC_REQUIRE([AM_CYGWIN32]) AC_REQUIRE([AM_MINGW32]) AC_MSG_CHECKING([for executable suffix]) -AC_CACHE_VAL(am_cv_exeext,[ -if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then +AC_CACHE_VAL(am_cv_exeext, +[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then am_cv_exeext=.exe else cat > am_c_test.c << 'EOF' |