diff options
Diffstat (limited to 'opcodes/ChangeLog')
| -rw-r--r-- | opcodes/ChangeLog | 4319 |
1 files changed, 1 insertions, 4318 deletions
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 40eed6e..eacd265 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,4322 +1,5 @@ -2003-12-15 Christian Groessler <chris@groessler.org> - * z8k-dis.c (intr_names): Removed. - (print_intr, print_flags): New functions. - (unparse_instr): Use new functions. - -2003-12-15 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> - - * m32r-opc.c: Regenerate. - -2003-12-14 Mark Mitchell <mark@codesourcery.com> - - * arm-opc.h (arm_opcodes): Put V6 instructions before XScale - instructions. - -2003-12-13 Hans-Peter Nilsson <hp@bitrange.com> - - * mmix-opc.c (mmix_opcodes): Use GO_INSN_BYTE, PUSHGO_INSN_BYTE, - SETL_INSN_BYTE, INCH_INSN_BYTE, INCMH_INSN_BYTE, INCML_INSN_BYTE - and SWYM_INSN_BYTE instead of raw numbers. - -2003-12-10 Zack Weinberg <zack@codesourcery.com> - - * ppc-opc.c (MO): Make optional. - (RAO, RSO, SHO): New optional forms of RA, RS, SH operands. - (tlbwe): Accept for both PPC403 and BOOKE. Make all operands optional. - -2003-12-05 Ricardo Anguiano <anguiano@codesourcery.com> - Mark Mitchell <mark@codesourcery.com> - Richard Earnshaw <rearnsha@arm.com> - - * arm-dis.c (print_arm_insn): Add 'W' macro. - * arm-opc.h (arm_opcodes): Add V6 instructions. - (thumb_opcodes): Likewise. - -2003-12-04 Alan Modra <amodra@bigpond.net.au> - - * openrisc-asm.c: Regenerate. - * pj-opc.c: Update copyright date. - -2003-12-03 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> - - * m32r-asm.c: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-desc.h: Regenerate. - * m32r-dis.c: Regenerate. - * m32r-ibld.c: Regenerate. - * m32r-opc.c: Regenerate. - * m32r-opc.h: Regenerate. - * m32r-opinst.c: Regenerate. - -2003-12-02 Alexandre Oliva <aoliva@redhat.com> - - * sh-opc.h: Add support for sh4a and no-fpu variants. - * sh-dis.c: Ditto. - -2003-12-02 Kazu Hirata <kazu@cs.umass.edu> - - * alpha-opc.c: Remove ARGSUSED. - * i370-opc.c: Likewise. - * ppc-opc.c: Likewise. - -2003-12-02 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - -2003-11-28 Christian Groessler <chris@groessler.org> - - * z8k-dis.c: Convert to ISO C90. - * z8kgen.c: Convert to ISO C90. - (opt): Move long opcode for "ldb rdb,imm8" after short one, now - the short one is created when assembling. - * z8k-opc.h: Regenerate with new z8kgen.c. - -2003-11-19 Kazu Hirata <kazu@cs.umass.edu> - - * h8300-dis.c (print_colon_thingie): Remove. - -2003-11-18 Maciej W. Rozycki <macro@ds2.pg.gda.pl> - - * mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and - "dlca". - -2003-11-14 Nick Clifton <nickc@redhat.com> - - * dis-init.c (init_disassemble_info): Initialise - symbol_is_valid field. - * dis-buf.c (generic_symbol_is_valid): New function. Always - returns TRUE. - * arm-dis.c (arm_symbol_is_valid): New function. Return FALSE - for ARM ELF mapping symbols. - * disassemble.c (disassemble_init_for_target): Set - symbol_is_valid field to arm_symbol_is_valid of the target is - an ARM. - -2003-11-05 H.J. Lu <hongjiu.lu@intel.com> - - * m68k-opc.c (m68k_opcodes): Reorder "fmovel". - -2003-11-03 Daniel Jacobowitz <drow@mvista.com> - - * arm-dis.c (print_arm_insn): Print "-" after "#". - -2003-10-30 Falk Hueffner <falk.hueffner@student.uni-tuebingen.de> - - * alpha-opc.c: Add support for a second argument to RPCC. - -2003-10-27 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-dis.c: Convert to ISO C90 prototypes. - -2003-10-21 Peter Barada <pbarada@mail.wm.sps.mot.com> - Bernardo Innocenti <bernie@develer.com> - - * m68k-dis.c: Add MCFv4/MCF5528x support. - * m68k-opc.c: Likewise. - -2003-10-10 Dave Brolley <brolley@redhat.com> - - * frv-asm.c,frv-desc.c,frv-opc.c: Regenerated. - -2003-10-08 Dave Brolley <brolley@redhat.com> - - * frv-desc.[ch], frv-opc.[ch]: Regenerated. - -2003-09-30 Bob Wilson <bob.wilson@acm.org> - - * xtensa-dis.c (fetch_data): Remove numBytes parameter. - (print_insn_xtensa): Fix call to fetch_data. - -2003-09-30 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_arch_choices): Add entry for "mips64r2" - (print_insn_args): Add handing for +E, +F, +G, and +H. - * mips-opc.c (I65): New define for MIPS64r2. - (mips_builtin_opcodes): Add "dext", "dextm", "dextu", "dins", - "dinsm", "dinsu", "drotl", "drotr", "drotr32", "drotrv", "dsbh", - and "dshd" for MIPS64r2. Adjust "dror", "dror32", and "drorv" to - be supported on MIPS64r2. - -2003-09-24 Dave Brolley <brolley@redhat.com> - - * frv-desc.c, frv-opc.c, frv-opc.h: Regenerated. - -2003-09-14 Andreas Jaeger <aj@suse.de> - - * i386-dis.c: Convert to ISO C90 prototypes. - * i370-dis.c: Likewise. - * i370-opc.c: Likewiwse. - * i960-dis.c: Likewise. - * ia64-opc.c: Likewise. - -2003-09-09 Dave Brolley <brolley@redhat.com> - - * frv-desc.c: Regenerated. - -2003-09-08 Dave Brolley <brolley@redhat.com> - - On behalf of Doug Evans <dje@sebabeach.org> - * Makefile.am (run-cgen): Pass new args archfile and opcfile - to cgen.sh. - (stamp-ip2k,stamp-m32r,stamp-fr30,stamp-frv,stamp-openrisc, - stamp-iq2000,stamp-xstormy16): Pass paths of .cpu and .opc files - to cgen.sh. - (stamp-frv): Delete hardcoded path spec workaround. - * Makefile.in: Regenerate. - * cgen.sh: New args archfile and opcfile. Pass on to cgen. - -2003-09-04 Nick Clifton <nickc@redhat.com> - - * v850-dis.c (disassemble): Accept bfd_mach_v850e1. - * v850-opc.c (v850_opcodes): Add DBTRAP and DBRET instructions. - -2003-09-04 Alan Modra <amodra@bigpond.net.au> - - * ppc-dis.c (struct dis_private): New. - (powerpc_dialect): Make static. Accept -Many in addition to existing - options. Save dialect in dis_private. - (print_insn_big_powerpc): Retrieve dialect from dis_private. - (print_insn_little_powerpc): Likewise. - (print_insn_powerpc): Call powpc_dialect here. Remove unnecessary - efs/altivec check. Try harder to disassemble if given -Many. - * ppc-opc.c (insert_fxm): Expand comment. - (PPC, PPCCOM, PPC32, PPC64, PPCVEC): Remove PPC_OPCODE_ANY. - (POWER, POWER2, PPCPWR2, POWER32, COM, COM32, M601, PWRCOM): Likewise. - (POWER4): Remove PPCCOM. - (PPCONLY): Don't define. Update all occurrences to PPC. - -2003-09-03 Andrew Cagney <cagney@redhat.com> - - * dis-init.c (init_disassemble_info): New file and function. - * Makefile.am (CFILES): Add "dis-init.c". - (libopcodes_la_SOURCES): Add "dis-init.c". - (dis-init.lo): Specify dependencies. - * Makefile.in: Regenerate. - -2003-09-03 Dave Brolley <brolley@redhat.com> - - * frv-*: Regenerated. - -2003-09-02 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c (powerpc_opcodes): Combine identical PPC403/BOOKE entries. - Move duplicate mnemonic entries together. Use RS instead of RT on - all mt*. - * ppc-dis.c: Convert to ISO C. - -2003-08-29 Dave Brolley <brolley@redhat.com> - - * Makefile.am (stamp-frv): Copy frv.cpu and frv.opc from - $(srcdir)/../cpu temporarily when regenerating source files. - * Makefile.in: Regenerated. - -2003-08-19 Nick Clifton <nickc@redhat.com> - - * arm-dis.c (print_insn_arm: case 'A'): Add code to - disassemble unindexed form of Addressing Mode 5. - -2003-08-19 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c (PPC440): Define. - (powerpc_opcodes): Allow mac*, mul*, nmac*, dccci, dcread, iccci, - icread instructions when PPC440. Add dlmzb instruction. - -2003-08-14 Alan Modra <amodra@bigpond.net.au> - - * dep-in.sed: Remove libintl.h. - * Makefile.am (POTFILES.in): Unset LC_COLLATE. - Run "make dep-am". - * Makefile.in: Regenerate. - -2003-08-07 Michael Meissner <gnu@the-meissners.org> - - * cgen-asm.c (hash_insn_array): Remove PARAMS macro. - (hash_insn_list): Ditto. - (build_asm_hash_table): Ditto. - (cgen_set_parse_operand_fn): Prototype definition. - (cgen_init_parse_operand): Ditto. - (hash_insn_array): Ditto. - (hash_insn_list): Ditto. - (build_asm_hash_table): Ditto. - (cgen_asm_lookup_insn): Ditto. - (cgen_parse_keyword): Ditto. - (cgen_parse_signed_integer): Ditto. - (cgen_parse_unsigned_integer): Ditto. - (cgen_parse_address): Ditto. - (cgen_validate_signed_integer): Ditto. - (cgen_validate_unsigned_integer): Ditto. - - * cgen-opc.c (hash_keyword_name): Remove PARAMS macro. - (hash_keyword_value): Ditto. - (build_keyword_hash_tables): Ditto. - (cgen_keyword_lookup_name): Prototype definition. - (cgen_keyword_lookup_value): Ditto. - (cgen_keyword_add): Ditto. - (cgen_keyword_search_init): Ditto. - (cgen_keyword_search_next): Ditto. - (hash_keyword_name): Ditto. - (hash_keyword_value): Ditto. - (build_keyword_hash_tables): Ditto. - (cgen_hw_lookup_by_name): Ditto. - (cgen_hw_lookup_by_num): Ditto. - (cgen_operand_lookup_by_name): Ditto. - (cgen_operand_lookup_by_num): Ditto. - (cgen_insn_count): Ditto. - (cgen_macro_insn_count): Ditto. - (cgen_get_insn_value): Ditto. - (cgen_put_insn_value): Ditto. - (cgen_lookup_insn): Ditto. - (cgen_get_insn_operands): Ditto. - (cgen_lookup_get_insn_operands): Ditto. - (cgen_set_signed_overflow_ok): Ditto. - (cgen_clear_signed_overflow_ok): Ditto. - (cgen_signed_overflow_ok_p): Ditto. - - * cgen-dis.c (hash_insn_array): Remove PARAMS macro. - (hash_insn_list): Ditto. - (build_dis_hash_table): Ditto. - (count_decodable_bits): Ditto. - (add_insn_to_hash_chain): Ditto. - (count_decodable_bits): Prototype definition. - (add_insn_to_hash_chain): Ditto. - (hash_insn_array): Ditto. - (hash_insn_list): Ditto. - (build_dis_hash_table): Ditto. - (cgen_dis_lookup_insn): Ditto. - - * cgen-asm.in (parse_insn_normal): Remove PARAMS macro. - (@arch@_cgen_build_insn_regex): Prototype definition. - (parse_insn_normal): Ditto. - (@arch@_cgen_assemble_insn): Ditto. - (@arch@_cgen_asm_hash_keywords): Ditto. - - * cgen-dis.in (print_normal): Remove PARAMS macro. Use void * - instead of PTR. - (print_address): Ditto. - (print_keyword): Ditto. - (print_insn_normal): Ditto. - (print_insn): Ditto. - (default_print_insn): Ditto. - (read_insn): Ditto. - (print_normal): Prototype definition. Use void * instead of PTR. - (print_address): Ditto. - (print_keyword): Ditto. - (print_insn_normal): Ditto. - (read_insn): Ditto. - (print_insn): Ditto. - (default_print_insn): Ditto. - (print_insn_@arch@): Ditto. - - * cgen-ibld.in (insert_normal): Remove PARAMS macro. - (insn_insn_normal): Ditto. - (extract_normal): Ditto. - (extract_insn_normal): Ditto. - (put_insn_int_value): Ditto. - (insert_1): Ditto. - (fill_cache): Ditto. - (extract_1): Ditto. - (insert_1): Prototype definition. - (insert_normal): Ditto. - (insert_insn_normal): Ditto. - (put_insn_int_value): Ditto. - (fill_cache): Ditto. - (extract_1): Ditto. - (extract_normal): Ditto. - (extract_insn_normal): Ditto. - - * fr30-asm.c: Regenerate. - * fr30-dis.c: Ditto. - * fr30-ibld.c: Ditto. - * frv-asm.c: Ditto. - * frv-dis.c: Ditto. - * frv-ibld.c: Ditto. - * ip2k-asm.c: Ditto. - * ip2k-dis.c: Ditto. - * ip2k-ibld.c: Ditto. - * iq2000-asm.c: Ditto. - * iq2000-dis.c: Ditto. - * iq2000-ibld.c: Ditto. - * m32r-asm.c: Ditto. - * m32r-dis.c: Ditto. - * m32r-ibld.c: Ditto. - * openrisc-asm.c: Ditto. - * openrisc-dis.c: Ditto. - * openrisc-ibld.c: Ditto. - * xstormy16-asm.c: Ditto. - * xstormy16-dis.c: Ditto. - * xstormy16-ibld.c: Ditto. - -2003-08-06 Nick Clifton <nickc@redhat.com> - - * po/fr.po: Updated French translation. - -2003-08-05 Nick Clifton <nickc@redhat.com> - - * configure.in (ALL_LINGUAS): Add nl. - * configure: Regenerate. - * po/nl.po: New Dutch translation. - -2003-07-30 Jason Eckhardt <jle@rice.edu> - - * i860-dis.c: Convert to ISO C90. Remove superflous prototypes. - -2003-07-30 Nick Clifton <nickc@redhat.com> - - * po/ro.po: Updated Romanian translation. - -2003-07-29 Jakub Jelinek <jakub@redhat.com> - - * ppc-opc.c (insert_mbe, extract_mbe): Shift 1L instead of 1 up. - -2003-07-24 Nick Clifton <nickc@redhat.com> - - * po/fr.po: Updated French translation. - -2003-07-18 Nick Clifton <nickc@redhat.com> - - * arm-dis.c (parse_arm_disassembler_option): Do not expect - option string to be NUL terminated. - (parse_disassembler_options): Allow options to be space or - comma separated. - -2003-07-17 Nick Clifton <nickc@redhat.com> - - * po/es.po: New Spanish translation. - * po/sv.po: New Swedish translation. - * po/opcodes.pot: Regenerate. - -2003-07-15 Richard Sandiford <rsandifo@redhat.com> - - * mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries. - -2003-07-14 Nick Clifton <nickc@redhat.com> - - * po/tr.po: Update with latest version. - * po/POTFILES.in: Regenerate. - * Makefile.in: Regenerate. - -2003-07-11 Alan Modra <amodra@bigpond.net.au> - - * po/opcodes.pot: Regenerate. - -2003-07-09 Alexandre Oliva <aoliva@redhat.com> - - 2000-05-25 Alexandre Oliva <aoliva@cygnus.com> - * m10300-dis.c (disassemble): Negate negative accumulator's shift. - 2000-05-24 Alexandre Oliva <aoliva@cygnus.com> - * m10300-dis.c (disassemble, case FSREG, FDREG): Don't assume - 32-bit longs when sign-extending operands. - 2000-04-20 Alexandre Oliva <aoliva@cygnus.com> - * m10300-opc.c: Remove MN10300_OPERAND_RELAX from all FSREGs. - * m10300-dis.c (HAVE_AM33_2): Define. - (disassemble): Use it. - (HAVE_AM33): Redefine. - (print_insn_mn10300): Fix mask for 5-byte extended insns. - 2000-04-01 Alexandre Oliva <aoliva@cygnus.com> - * m10300-opc.c: Renamed AM332 to AM33_2. - 2000-03-31 Alexandre Oliva <aoliva@cygnus.com> - * m10300-opc.c: Defined AM33 2.0 register operands. Added support - for AM33 2.0 `imm8,(abs16)' addressing mode for btst, bset and - bclr. Implemented `fbCC', `flCC', `dcpf' and all FP insns. - * m10300-dis.c (print_insn_mn10300): Recognize 5byte extended - insn code of AM33 2.0. - (disassemble): Recognize FMT_D3. Print out FP register names. - -2003-07-09 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (set_default_mips_dis_options): Get BFD from - the disassembler_info's section, rather than from the - disassembler_info's symbols pointer. - -2003-07-07 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c: Remove NULL pointer checks. Formatting. Remove - extraneous ATTRIBUTE_UNUSED. - * ppc-dis.c (print_insn_powerpc): Always pass a valid address to - operand->extract. - -2003-07-04 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c: Convert to C90, removing unnecessary prototypes and - casts. Formatting. - - * ppc-opc.c: Remove PARAMS from prototypes. - (FXM4): Define. - (insert_fxm): New function, used by both FXM and FXM4. - (extract_fxm): Likewise. - (XFXFXM_MASK): Remove 1 << 20 term. - (powerpc_opcodes): Add Power4 version of "mfcr". Simplify "mtcr" mask. - -2003-07-01 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-dis.c (s390_extract_operand): Add support for long displacements. - * s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z990. - * s390-opc.c (D20_20): Add define for 20 bit displacements. - (INSTR_RRF_R0RR, INSTR_RSL_R0RD, INSTR_RSY_RRRD, INSTR_RSY_RURD, - INSTR_RSY_AARD, INSTR_RXY_RRRD, INSTR_RXY_FRRD, INSTR_SIY_URD): Add - new instruction formats. - (MASK_RRF_R0RR, MASK_RSL_R0RD, MASK_RSY_RRRD, MASK_RSY_RURD, - MASK_RSY_AARD, MASK_RXY_RRRD, MASK_RXY_FRRD, MASK_SIY_URD): Likewise. - (s390_opformats): Likewise. - * s390-opc.txt: Add new instructions for cpu type z990. Add missing - hfp instructions. Add missing instructions pgin, pgout and xsch. - -2003-06-23 H.J. Lu <hongjiu.lu@intel.com> - - * i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in - Intel Precott New Instructions. - (PREGRP27): New. Added for "addsubpd" and "addsubps". - (PREGRP28): New. Added for "haddpd" and "haddps". - (PREGRP29): New. Added for "hsubpd" and "hsubps". - (PREGRP30): New. Added for "movsldup" and "movddup". - (PREGRP31): New. Added for "movshdup" and "movhpd". - (PREGRP32): New. Added for "lddqu". - (dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry. - Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for - entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for - entry 0xd0. Use PREGRP32 for entry 0xf0. - (twobyte_has_modrm): Updated. - (twobyte_uses_SSE_prefix): Likewise. - (grps): Use PNI_Fixup in the "sidtQ" entry. - (prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30, - PREGRP31 and PREGRP32. - (float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb. - Use "fisttpll" in entry 1 in opcode 0xdd. - Use "fisttp" in entry 1 in opcode 0xdf. - -2003-06-19 Christian Groessler <chris@groessler.org> - - * z8k-dis.c (instr_data_s): Change tabl_index from long to int. - (print_insn_z8k): Correctly check return value from - z8k_lookup_instr call. - (unparse_instr): Handle CLASS_IRO case. - * z8kgen.c: Fix function definitions. Fix formatting. - (opt): Add brk opcode alias for non-simulator breakpoint. Add - missing and fix existing in/out and sin/sout opcode definitions. - (args): "@ri", "@ro" - add CLASS_IRO register usage for in/out - opcodes. - (internal): Check p->flags for non-zero before dereferencing it. - (gas): Add CLASS_IRO line. Insert new OPC_xxx lines for the added - opcodes and renumber the remaining lines repectively. - (main): Remove "-d" command line switch. - * z8k-opc.h: Regenerate with new z8kgen.c. - -2003-06-11 H.J. Lu <hongjiu.lu@intel.com> - - * po/Make-in (DESTDIR): New. - (install-data-yes): Support $(DESTDIR). - (uninstall): Likewise. - -2003-06-11 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2003-06-10 Doug Evans <dje@sebabeach.org> - - * cgen-asm.in (@arch@_cgen_assemble_insn): CGEN_INSN_RELAX renamed to - CGEN_INSN_RELAXED. - * fr30-asm.c,fr30-desc.c,fr30-desc.h: Regenerate. - * frv-asm.c,frv-desc.c,frv-desc.h: Regenerate. - * ip2k-asm.c,ip2k-desc.c,ip2k-desc.h: Regenerate. - * iq2000-asm.c,iq2000-desc.c,iq2000-desc.h: Regenerate. - * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-opc.c: Regenerate. - * openrisc-asm.c,openrisc-desc.c,openrisc-desc.h: Regenerate. - * xstormy16-asm.c,xstormy16-desc.c,xstormy16-desc.h: Regenerate. - -2003-06-10 Gary Hade <garyhade@us.ibm.com> - Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c (DQ, RAQ, RSQ, RTQ): Define. - (insert_dq, extract_dq, insert_raq, insert_rtq, insert_rsq): New. - (powerpc_opcodes): Add "attn", "lq" and "stq". - -2003-06-10 Richard Sandiford <rsandifo@redhat.com> - - * h8300-dis.c (bfd_h8_disassemble): Don't print brackets round - rts/l and rte/l register lists. - -2003-06-03 Nick Clifton <nickc@redhat.com> - - * frv-desc.c: Regenerate. - * frv-opc.c: Regenerate. - * frv-asm.c: Regenerate. - * frv-desc.h: Regenerate. - * frv-dis.c: Regenerate. - * frv-ibld.c: Regenerate. - * frv-opc.h: Regenerate. - * po/opcodes.pot: Regenerate. - -2003-06-03 Michael Snyder <msnyder@redhat.com> - and Bernd Schmidt <bernds@redhat.com> - and Alexandre Oliva <aoliva@redhat.com> - - * disassemble.c (disassembler): Add support for h8300sx. - * h8300-dis.c: Ditto. - -2003-06-03 Nick Clifton <nickc@redhat.com> - - * frv-desc.c: Regenerate. - * frv-opc.c: Regenerate. - - * aclocal.m4: Regenerate. - * config.in: Regenerate. - * configure: Regenerate. - * iq2000-asm.c: Regenerate. - * iq2000-desc.c: Regenerate. - * iq2000-desc.h: Regenerate. - * iq2000-dis.c: Regenerate. - * iq2000-ibld.c: Regenerate. - * iq2000-opc.c: Regenerate. - * iq2000-opc.h: Regenerate. - * po/POTFILES.in: Regenerate. - * po/opcodes.pot: Regenerate. - -2003-05-23 Jason Eckhardt <jle@rice.edu> - - * i860-dis.c (crnames): Add bear, ccr, p0, p1, p2, p3. - (print_insn_i860): Grab 4 bits of the control register field - instead of 3. - -2003-05-18 Jason Eckhardt <jle@rice.edu> - - * i860-dis.c (print_insn_i860): Instruction shrd has a dual bit, - print it. - -2003-05-17 Andreas Jaeger <aj@suse.de> - - * Makefile.am (libopcodes_la_LIBADD): Add libbfd.la. - (libopcodes_la_DEPENDENCIES): Add libbfd.la. - * Makefile.in: Regenerated. - -2003-05-16 Nick Clifton <nickc@redhat.com> - - * configure.in (ALL_LINGUAS): Add Romanian translation. - * configure: Regenerate. - * po/ro.po: New file: Romanian translation. - -2003-05-12 Dhananjay Deshpande <dhananjayd@kpitcummins.com> - - * disassemble.c (disassembler): Add support for h8300hn and h8300sn. - -2003-05-09 Alan Modra <amodra@bigpond.net.au> - - * i386-dis.c (print_insn): Test intel_syntax against (char) -1 in - case char is unsigned. - -2003-05-01 Christian Groessler <chris@groessler.org> - - * z8k-dis.c (z8k_lookup_instr): Optimize FETCH_DATA calls. - (unpack_instr): Fix representation of segmented addresses. - (intr_name): Added, contains names of the parameters to the EI/DI - instructions. - (unparse_instr): Fix display of EI/DI parameters. - -2003-04-22 Doug Evans <dje@sebabeach.org> - - * fr30-desc.c,fr30-desc.h,fr30-opc.c,fr30-opc.h: Regenerate. - * frv-desc.c,frv-desc.h,frv-opc.c,frv-opc.h: Regenerate. - * ip2k-desc.c,ip2k-desc.h,ip2k-opc.c,ip2k-opc.h: Regenerate. - * m32r-desc.c,m32r-desc.h,m32r-opc.c,m32r-opc.h: Regenerate. - * m32r-opinst.c: Regenerate. - * openrisc-desc.c,openrisc-desc.h,openrisc-opc.c,openrisc-opc.h: Regenerate. - * xstormy16-desc.c,xstormy16-desc.h,xstormy16-opc.c,xstormy16-opc.h: Regenerate. - -2003-04-15 Rohit Kumar Srivastava <rohits@kpitcummins.com> - - * h8500-opc.c: Replace occurrances of 'Hitachi' with 'Renesas'. - -2003-04-07 James E Wilson <wilson@tuliptree.org> - - * ia64-ic.tbl (fr-readers): Add mem-writers-fp. - * ia64-asmtab.c: Regenerate. - -2003-04-08 Alexandre Oliva <aoliva@redhat.com> - - * mips-dis.c (mips_gpr_names_newabi): Reverted previous patch. - -2003-04-07 Alexandre Oliva <aoliva@redhat.com> - - * mips-dis.c (mips_gpr_names_newabi): $12-$15 are named $t4-$t7. - -2003-04-04 Svein E. Seldal <Svein.Seldal@solidas.com> - - * tic4x-dis.c: Namespace cleanup. Replace s/c4x/tic4x and - s/c3x/tic3x/ - -2003-04-01 Nick Clifton <nickc@redhat.com> - - * arm-dis.c: Remove presence of (r) and (tm) symbols. - * arm-opc.h: Remove presence of (r) and (tm) symbols. - -2003-03-25 Stan Cox <scox@redhat.com> - Nick Clifton <nickc@redhat.com> - - Contribute support for Intel's iWMMXt chip - an ARM variant: - - * arm-dis.c (regnames): Add iWMMXt register names. - (set_iwmmxt_regnames): New function. - (print_insn_arm): Handle iWMMXt formatters. - * arm-opc.h: Document iWMMXt formatters. - (arm_opcod): Add iWMMXt instructions. - -2003-03-22 Doug Evans <dje@sebabeach.org> - - * i386-dis.c (dis386): Recognize icebp (0xf1). - -2003-03-21 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-dis.c (init_disasm): Rename S390_OPCODE_ESAME to - S390_OPCODE_ZARCH. - (print_insn_s390): Use new modes field of s390_opcodes. - * s390-mkopc.c (ARCHBITS_ESAONLY, ARCHBITS_ESA, ARCHBITS_ESAME): Remove. - (s390_opcode_mode_val, s390_opcode_cpu_val): New enums. - (struct op_struct): Remove archbits. Add mode_bits and min_cpu. - (insertOpcode): Replace archbits by min_cpu and mode_bits. - (dumpTable): Write mode_bits and min_cpu instead of archbits. - (main): Adapt to new format in s390-opcode.txt. - * s390-opc.c (s390_opformats): Replace archbits by min_cpu and - mode_bits. - * s390-opc.txt: Replace archbits by min_cpu and mode_bits. - -2003-03-17 Nick Clifton <nickc@redhat.com> - - * ppc-opc.c: Fix formatting. Update copyright date. - -2003-03-14 Daniel Jacobowitz <drow@mvista.com> - - * ppc-opc.c (powerpc_opcodes): Readd tlbre for PPC403. - -2003-02-25 Alan Modra <amodra@bigpond.net.au> - - * hppa-dis.c: Formatting. - -2003-02-25 Matthew Wilcox <willy@debian.org> - - * hppa-dis.c (print_insn_hppa): Implement fcnv instruction modifiers. - - * hppa-dis.c (print_insn_hppa <2 bit space register>): Do not print - the space register when the value is zero. - -2003-02-23 Elias Athanasopoulos <elathan@phys.uoa.gr> - - * mips-dis.c (print_mips_disassembler_options): Make 'i' unsigned, - use ARRAY_SIZE in loops. - -2003-02-12 Dave Brolley <brolley@redhat.com> - - * fr30-desc.c: Regenerate. - -2003-02-06 Gwenole Beauchesne <gbeauchesne@mandrakesoft.com> - - * i386-dis.c (dq_mode, Edq): Define. - (dis386_twobyte): Correct movd operands. - (OP_E): Handle dq_mode case. - -2003-01-29 Henric Jungheim <henric@attbi.com> - - * sparc-dis.c (print_insn_sparc): When examining values added in - to rs1, make sure that there are previous instructions. - -2003-01-23 Nick Clifton <nickc@redhat.com> - - * Add sh2e support: - - 2002-04-02 Alexandre Oliva <aoliva@redhat.com> - - * sh-dis.c (print_insn_shx): Handle bfd_mach_sh2e. - * sh-opc.h (arch_sh2e, arch_sh2e_up): New. - (arch_sh2_up): Added sh2e. - (sh_table): Replaced all occurrences of arch_sh3e_up with - arch_sh2e_up, except in fsqrt. - -2003-01-23 Alan Modra <amodra@bigpond.net.au> - - * sh64-dis.c: Include elf32-sh64.h. - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - -2003-01-17 Richard Henderson <rth@redhat.com> - - * alpha-opc.c (alpha_opcodes): Add bugchk, rduniq, wruniq, gentrap - PAL entry points. - -2003-01-16 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2003-01-08 Klee Dienes <kdienes@apple.com> - - * Makefile.am (ALL_MACHINES): Add msp430-dis.lo. - * Makefile.in: Regenerate. - -2003-01-08 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c (powerpc_macros <extrwi>): Accept a shift of 32. - -2002-01-02 Ben Elliston <bje@redhat.com> - Jeff Johnston <jjohnstn@redhat.com> - - * iq2000-asm.c: New file. - * iq2000-desc.c: Likewise. - * iq2000-desc.h: Likewise. - * iq2000-dis.c: Likewise. - * iq2000-ibld.c: Likewise. - * iq2000-opc.c: Likewise. - * iq2000-opc.h: Likewise. - * Makefile.am (HFILES): Add iq2000-desc.h, iq2000-opc.h. - (CFILES): Add iq2000-asm.c, iq2000-desc.c, iq2000-dis.c, - iq2000-ibld.c, iq2000-opc.c. - (ALL_MACHINES): Add iq2000-asm.lo, iq2000-desc.lo, iq2000-dis.lo, - iq2000-ibld.lo, iq2000-opc.lo. - (CLEANFILES): Add stamp-iq2000. - (IQ2000_DEPS): New macro. - (stamp-iq2000): New target. - * Makefile.in: Regenerate. - * configure.in: Handle bfd_iq2000_arch. - * configure: Regenerate. - -2003-01-02 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (print_insn_args): Use position extracted by "+A" - to calculate size for "+B". Redo code for "+C" so it shares - the same style as "+A" and "+B" now do. - -2003-01-02 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c: Update copyright years. - (print_insn_arg): Rename to... - (print_insn_args): This, returning void. Process the whole - string of args rather than a single one. Reindent. - (print_insn_mips): Update to match the above. - -2002-12-31 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Move "di" into the - right order alphabetically, and make all hex constants use - lower-case letters. - -2002-12-31 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_cp0sel_name): New structure. - (mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2) - (mips_cp0sel_names_sb1): New arrays. - (mips_arch_choice): New structure members "cp0sel_names" and - "cp0sel_names_len". - (mips_arch_choices): Add references to new cp0sel_names arrays - as appropriate, and make all existing entries reference - appropriate mips_XXX_names_numeric arrays rather than simply - using NULL. - (mips_cp0sel_names, mips_cp0sel_names_len): New variables. - (lookup_mips_cp0sel_name): New function. - (set_default_mips_dis_options): Set mips_cp0sel_names and - mips_cp0sel_names_len as appropriate. Remove now-unnecessary - checks for NULL register name arrays. - (parse_mips_dis_option): Likewise. - (print_insn_arg): Handle "+D" operand type. - * mips-opc.c (mips_builtin_opcodes): Add new "+D" variants - of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register - names symbolically. - -2002-12-30 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric) - (mips_hwr_names_mips3264r2): New arrays. - (mips_arch_choice): New "hwr_names" member. - (mips_arch_choices): Adjust for structure change, and add a new - entry for "mips32r2" ISA. - (mips_hwr_names): New variable. - (set_default_mips_dis_options): Set mips_hwr_names. - (parse_mips_dis_option): New "hwr-names" option which sets - mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names. - (print_insn_arg): Change return type to "int" - and use that to indicate number of characters consumed. - Add support for "+" operand extension character, "+A", "+B", - "+C", and "K" operands. - (print_insn_mips): Adjust for changes to print_insn_arg. - (print_mips_disassembler_options): Adjust for "hwr-names" - addition and "reg-names" change. - * mips-opc (I33): New define (shorthand for INSN_ISA32R2). - (mips_builtin_opcodes): Note that "nop" and "ssnop" are special - forms of "sll". Add new MIPS32 Release 2 instructions: ehb, - di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2, - rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh. - Note that hardware rotate instructions (ror, rorv) can be - used on MIPS32 Release 2, and add the official mnemonics - for them (rotr, rotrv) and the similar "rotl" mnemonic for - left-rotate. - -2002-12-30 Dmitry Diky <diwil@mail.ru> - - * configure.in: Add msp430 target. - * configure: Regenerate. - * disassemble.c: Add entry for msp430 disassembly. - * msp430-dis.c: New file: msp430 disassembler. - -2002-12-27 Chris Demetriou <cgd@broadcom.com> - - * disassemble.c (disassembler_usage): Add invocation of - print_mips_disassembler_options. - * mips-dis.c: Include libiberty.h. - (print_mips_disassembler_options, set_default_mips_dis_options) - (parse_mips_dis_option, parse_mips_dis_options, choose_abi_by_name) - (choose_arch_by_name, choose_arch_by_number): New functions. - (mips_abi_choice, mips_arch_choice): New structures. - (mips32_reg_names, mips64_reg_names, reg_names): Remove. - (mips_gpr_names_numeric, mips_gpr_names_oldabi) - (mips_gpr_names_newabi, mips_fpr_names_numeric) - (mips_fpr_names_32, mips_fpr_names_n32, mips_fpr_names_64) - (mips_cp0_names_numeric, mips_cp0_names_mips3264) - (mips_cp0_names_sb1, mips_abi_choices, mips_arch_choices) - (mips_processor, mips_isa, mips_gpr_names, mips_fpr_names) - (mips_cp0_names): New variables. - (print_insn_args): Use new variables to print GPR, FPR, and CP0 - register names. - (mips_isa_type): Remove. - (print_insn_mips): Remove ISA and CPU setup since it is now done... - (_print_insn_mips): Here. Remove register setup code, and - call set_default_mips_dis_options and parse_mips_dis_options - instead. - (print_mips16_insn_arg): Use mips_gpr_names instead of mips32_names. - -2002-12-23 Alan Modra <amodra@bigpond.net.au> - - * Makefile.in: Regenerate. - -2002-12-19 Nick Kelsey <nickk@ubicom.com> - - * cgen-asm.c (cgen_parse_keyword): Added underscore to symbol character - check to fix false keyword trigger with names such as <keyword>_foo. - -2002-12-19 Doug Evans <dje@sebabeach.org> - - * Makefile.am (CGEN_CPUS): New variable. - (run-cgen-all): New rule. - * Makefile.in: Regenerate. - -2002-12-18 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two - "dror" entries, and reorder the remaining "dror" and "ror" entries. - -2002-12-16 DJ Delorie <dj@delorie.com> - - * xstormy16-asm.c (parse_immediate16): Add prototype. - -2002-12-16 Andrew MacLeod <amacleod@redhat.com> - - * xstormy16-asm.c: Regenerate. - -2002-12-16 Alan Modra <amodra@bigpond.net.au> - - * ns32k-dis.c (print_insn_ns32k): Constify "d", remove register - keyword. - -2002-12-13 Alan Modra <amodra@bigpond.net.au> - - * h8500-opc.h (h8500_table): Add missing initializers to quiet - warnings. - * pj-dis.c (print_insn_pj): Adjust for pj_opc_info_t change. - * pj-opc.c (pj_opc_info): Add braces around union initializer. - * z8kgen.c: Include "libiberty.h". - (opt, args, toks): Fix initializer warnings. - (chewname): Make "name" a char **. Return mnemonic trimmed of - operands. - (gas): Improve emitted "DO NOT EDIT" warning. Format emitted - opcode_entry_type, and make "nicename" and "name" const. Make - z8k_table const too. Formatting. Generate idx as gas needs it. - * z8k-opc.h: Regenerate. - -2002-12-08 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-dis.c (print_indexed_operand): Fix PC-relative address - for 9 and 16-bit PC-relative addressing mode. - -2002-12-05 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c: Delete evsabs, evsnabs, evsneg, evsadd, evssub, - evsmul, evsdiv, evscmpgt, evsgmplt, evststgt, evtstlt, evststeq, - evscfui, evscfsi, evscfuf, evscfsf, evsctui, evsctuiz, evsctsi, - evsctsiz, evsctuf, evsctsf, evmwhssfaa, evmwhssmaa, evmwhsmfaa, - evmwhsmiaa, evmwhusiaa, evmwhumiaa, evmwhssfan, evmwhssian, - evmwhsmfan, evmwhsmian, evmwhusian, evmwhumian, evmwhgssfaa, - evmwhgsmfaa, evmwhgsmiaa, evmwhgumiaa, evmwhgssfan, evmwhgsmfan, - evmwhgsmian, evmwhgumian. - (mftb): Add to opcode table. - (mtspefscr): Change RT to RS in opcode table. - -2002-12-05 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c: Move mbar and msync up. Change mask for mbar and - msync. - -2002-12-04 David Mosberger <davidm@hpl.hp.com> - - * ia64-opc-d.c (ia64_opcodes_d): Add "hint" instruction. - * ia64-opc-b.c: Add "hint.b" instruction. - * ia64-opc-f.c: Add "hint.f" instruction. - * ia64-opc-i.c: Add "hint.i" instruction. - * ia64-opc-m.c: Add "hint.m", "fc.i", "ld16", "st16", and - "cmp8xchg16" instructions. - * ia64-opc-x.c: Add "hint.x" instruction. - - * ia64-opc.h (AR_CSD): New macro. - - * ia64-ic.tbl: Update according to SDM2.1. - * ia64-raw.tbl: Ditto. - * ia64-waw.tbl: Ditto. - - * ia64-gen.c (in_iclass): Handle "hint" like "nop". - (lookup_regindex): Recognize AR[FCR], AR[EFLAG], AR[CSD], - AR[SSD], AR[CFLG], AR[FSR], AR[FIR], and AR[FDR]. - * ia64-asmtab.c: Regenerate. - -2002-11-25 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c: Remove evmwlssf, evmwlssfa, evmwlsmf, evmwlsmfa, - evmwlssfaaw, evmwlsmfaaw, evmwlssfanw, evmwlsfanw. - -2002-12-04 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c (PMRN): Remove. - (RA): Set to NB + 1. - (powerpc_opcodes): Change PMRN to SPR. - Change all RD to RS. - Change mftb to look like mftbl. - Move mftb before mftbl. - Add mfbbtar. - Add mtbbtar. - Change mfpmr to use PMR. - Change mtpmr to use PMR. - (RD): Remove. - (insert_ev2): Fix mask and shift. - (extract_ev2): Same. - (insert_ev4): Same. - (extract_ev4): Same. - (PMR): Define. - (extract_pmrn): Remove. - (insert_pmrn): Remove. - -2002-12-03 Richard Henderson <rth@redhat.com> - - * ia64-opc-m.c: Add ld8.mov. - * ia64-asmtab.c: Regenerate. - -2002-12-02 Alan Modra <amodra@bigpond.net.au> - - * arm-dis.c (print_insn_arm): Constify "insn". Formatting. - (print_insn_thumb): Likewise. - * h8500-dis.c (print_insn_h8500): Constify "opcode". - * mcore-dis.c (print_insn_mcore): Constify "op". Formatting. - * ns32k-dis.c (print_insn_arg <case 'F'>): Use a union to avoid - type-punned pointer warnings. - <case 'L'>: Likewise. Fix error message too. - * pdp11-dis.c (print_reg): Warning fix. - * sh-dis.c (print_movxy): Constify "op" param. - (print_insn_ddt): Constify sh_opcode_info vars. - (print_insn_ppi): Likewise. - (print_insn_sh): Likewise. - * tic30-dis.c (cnvt_tmsfloat_ieee): Use a union to avoid - type-punned pointer warnings. - * w65-dis.c (print_insn_w65): Constify "op". - -2002-12-01 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-dis.c (PC_REGNUM): Define. - (print_indexed_operand): Need an adjustment for some PC-relative - operand modes; print the final address of PC-relative modes. - (print_insn): Take into account movw/movb to adjust the PC-relative - operand addresses. - -2002-11-30 Alan Modra <amodra@bigpond.net.au> - - *arm-dis.c, cris-dis.c, h8300-dis.c, mips-dis.c, mmix-dis.c, sh-dis.c, - sh64-dis.c, v850-dis.c: Replace boolean with bfd_boolean, true with - TRUE, false with FALSE. Simplify comparisons of bfd_boolean vars - with TRUE/FALSE. Formatting. - -2002-11-25 DJ Delorie <dj@redhat.com> - - * xstormy16-opc.c: Regenerate. - -2002-11-25 Jim Wilson <wilson@redhat.com> - - * ia64-dis.c (print_insn_ia64): Correct handling of IA64_OPND_TGT64. - -2002-11-15 DJ Delorie <dj@redhat.com> - - * xstormy16-desc.c: Regenerate. - * xstormy16-opc.c: Regenerate. - * xstormy16-opc.h: Regenerate. - -2002-11-18 Klee Dienes <kdienes@apple.com> - - * avr-dis.c: Include libiberty.h (for xmalloc). - (struct avr_opcodes_s): Remove 'bin_mask' field (it's - automatically computed in the init routine). - (AVR_INSN): No longer provide bin_mask field in initializer. - (avr_opcodes_s): Declare as const. - (print_insn_avr): Store the bin_mask field in a separate table - (allocated with xmalloc); iterate through it at the same time as - we iterate through the opcodes. - -2002-11-18 Klee Dienes <kdienes@apple.com> - - * h8300-dis.c: Include libiberty.h (for xmalloc). - (struct h8_instruction): New type, used to wrap h8_opcodes with a - length field (computed at run-time). - (h8_instructions): New variable. - (bfd_h8_disassemble_init): Allocate the storage for - h8_instructions. Fill h8_instructions with pointers to the - appropriate opcode and the correct value for the length field. - (bfd_h8_disassemble): Iterate through h8_instructions instead of - h8_opcodes. - -2002-11-18 Klee Dienes <kdienes@apple.com> - - * arc-opc.c (arc_ext_opcodes): Define. - (arc_ext_operands): Define. - * i386-dis.c (Suffix3DNow): Declare as const. - * arm-opc.h (arm_opcodes): Declare as const. - (thumb_opcodes): Declare as const. - * h8500-opc.h (h8500_table): Declare as const. - (h8500_table): Use a NULL for the opcode in the terminator, so - that code testing (opcode->name) behaves correctly. - * mcore-opc.h (mcore_table): Declare as const. - * sh-opc.h (sh_table): Declare as const. - * w65-opc.h (optable): Declare as const. - * z8k-opc.h (z8k_table): Declare as const. - -2002-11-18 Svein E. Seldal <Svein.Seldal@solidas.com> - - * tic4x-dis.c: Added support for enhanced and special insn. - (c4x_print_op): Added insn class 'i' and 'j' - (c4x_hash_opcode_special): Add to support special insn - (c4x_hash_opcode): Update to support the new opcode-list - format. Add support for the new special insns. - (c4x_disassemble): New opcode-list support. - -2002-11-16 Klee Dienes <kdienes@apple.com> - - * m88k-dis.c: Include libiberty.h (for xmalloc). - (HASHTAB): New type, used to build instruction hash tables. - Contains a pointer to an INSTAB and a pointer to the next hash - chain entry. - (instructions): Move definition from m88k.h; remove initialization - of 'next' field. - (hashtable): Now an aray of pointer-to-HASHTAB, not INSTAB. - (printop): Mark pointer to OPSPEC as const. - (install): Remove; fold into init_disasm. - (m88kdis): Update to ihashtab_initialized to 1 after calling - init_disasm. entry_ptr now iterates through HASHTABs, not - INSTABs. - (init_disasm): Iterate through the instructions and add to - hashtable[]. - -2002-11-16 Svein E. Seldal <Svein.Seldal@solidas.com> - - * tic4x-dis.c: (c4x_print_op): Add support for the new argument - format. Fix bug in 'N' register printer. - -2002-11-12 Segher Boessenkool <segher@koffie.nl> - - * ppc-dis.c (print_insn_powerpc): Correct condition register display. - -2002-11-07 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c (EVUIMM_4): Change bit size to 32. - (EVUIMM_2): Same. - (EVUIMM_8): Same. - -2002-11-07 Klee Dienes <kdienes@apple.com> - - * Makefile.am (ia64-asmtab.c): Update to use the new '--srcdir' - argument to ia64-gen. - Regenerate dependencies for ia64-len.lo. - * Makefile.in: Regenerate. - * ia64-gen.c: Convert to use getopt(). Add the standard GNU - options, as well as '--srcdir', which controls the directory in - which ia64-gen looks for the sources it uses to generate the - output table. Add a 'const' to the declaration of the final - output table. Call xmalloc_set_program_name to set the program - name. - * ia64-asmtab.c: Regenerate. - -2002-11-07 Nick Clifton <nickc@redhat.com> - - * ia64-gen.c: Fix comment formatting and compile time warnings. - * ia64-opc-a.c: Fix compile time warnings. - * ia64-opc-b.c: Likewise. - * ia64-opc-d.c: Likewise. - * ia64-opc-f.c: Likewise. - * ia64-opc-i.c: Likewise. - * ia64-opc-m.c: Likewise. - * ia64-opc-x.c: Likewise. - -2002-11-06 Aldy Hernandez <aldyh@redhat.com> - - * ppc-opc.c: Change RD to RS for evmerge*. - -2002-10-07 Nathan Tallent <eraxxon@alumni.rice.edu> - - * sparc-opc.c (sparc_opcodes) <fb, fba, fbe, fbz, fbg, fbge, - fbl, fble, fblg, fbn, fbne, fbnz, fbo, fbu, fbue, fbug, fbuge, - fbul, fbule>: Add conditional/unconditional branch - classification. - -2002-10-13 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-dis.c (print_insn): Treat bitmask and branch operands - at the end. - -2002-09-30 Gavin Romig-Koch <gavin@redhat.com> - Ken Raeburn <raeburn@cygnus.com> - Aldy Hernandez <aldyh@redhat.com> - Eric Christopher <echristo@redhat.com> - Richard Sandiford <rsandifo@redhat.com> - - * mips-dis.c (print_insn_arg): Handle '[', ']', 'e' and '%'. - (mips_isa_type): Handle bfd_mach_mips4120, bfd_mach_mips5400 - and bfd_mach_mips5500. - * mips-opc.c (V1): Include INSN_4111 and INSN_4120. - (N411, N412, N5, N54, N55): New convenience defines. - (mips_builtin_opcodes): Add vr4120, vr5400 and vr5500 opcodes. - Change dmadd16 and madd16 from V1 to N411. - -2002-09-26 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (print_insn_mips): Always allow disassembly of - 32-bit jalx opcode. - -2002-09-24 Nick Clifton <nickc@redhat.com> - - * po/de.po: Updated German translation. - -2002-09-21 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2002-09-20 Nick Clifton <nickc@redhat.com> - - * ppc-opc.c (CRFD, CRFS): Add PPC_OPERAND_CR flag so that cr - register names are accepted. - -2002-09-17 Svein E. Seldal <Svein.Seldal@solidas.com> - - * tic4x-dis.c: Add function declarations and ATTRIBUTE_UNUSED. - Convert functions to K&R format. - -2002-09-13 Nick Clifton <nickc@redhat.com> - - * ppc-opc.c (MFDEC2): Include Book-E. - (PPCCHLK64): New opcode mask. - (evsubw, evsubiw, evmr, evnot, isellt, iselgt, iseleq, mfpid, - mfcsrr0, mfcsrr1, mfdear, mfesr, mfivpr, mfusprg0, mftbl, - mftbu, mfpir, mfdbsr, mfdbcr0, mfdbcr1, mfdbcr2, mfiac1, - mfiac2, mfiac3, mfiac4, mfdac1, mfdac2, mfdvc1, mfdvc2, mftsr, - mftcr, mfivor0, mfivor1, mfivor2, mfivor3, mfivor4, mfivor5, - mfivor6, mfivor7, mfivor8, mfivor9, mfivor10, mfivor11, - mfivor12, mfivor13, mfivor14, mfivor15, mfbbear, mfmcsrr0, - mfmcsrr1, mfmcsr, mtpid, mtdecar, mtcsrr0, mtcsrr1, mtdear, - mtesr, mtivpr, mtusprg0, mtsprg4, mtsprg5, mtsprg6, mtsprg7, - mtdbsr, mtdbcr0, mtdbcr1, mtdbcr2, mtiac1, mtiac2, mtiac3, - mtiac4, mtdac1, mtdac2, mtdvc1, mtdvc2, mttsr, mttcr, mtivor0, - mtivor1, mtivor2, mtivor3, mtivor4, mtivor5, mtivor6, mtivor7, - mtivor8, mtivor9, mtivor10, mtivor11, mtivor12, mtivor13, - mtivor14, mtivor15, mtbbear, mtmcsrr0, mtmcsrr1, mtmcsr): New - Book-E instructions. - (evfsneg): Fix opcode value. - (dcbtstlse, dcbtlse, icblce, dcblce, icbtsle): Use PPCCHLK64 - mask. - (mcrxr64, tlbivaxe, tlbsxe, tlbsxe.): Restrict to 64-bit - Book-E. - (extsw): Restrict to 64-bit PPC instruction sets. - (extsw.): Does not exist in 64-bit Book-E. - (powerpc_macro): Remove mftbl, mftbu and mftb Book-E macros as - they are no longer needed. - -2002-09-12 Gary Hade <garyhade@us.ibm.com> - - * ppc-dis.c (powerpc_dialect): Add missing PPC_OPCODE_CLASSIC. - -2002-09-11 Nick Clifton <nickc@redhat.com> - - * po/da.po: Updated Danish translation file. - -2002-09-04 Nick Clifton <nickc@redhat.com> - - * ppc-opc.c (extsw, extsw.): Do not allow for the BookE32. - -2002-09-04 Nick Clifton <nickc@redhat.com> - - * disassemble.c (disassembler_usage): Add invocation of - print_ppc_disassembler_options. - * ppc-dis.c (print_ppc_disassembler_options): New function. - -2002-09-04 Nick Clifton <nickc@redhat.com> - - * ppc-opc.c: The BookE implementations of the TLBWE and TLBRE - instructions do not take any arguments. - -2002-09-02 Nick Clifton <nickc@redhat.com> - - * v850-opc.c: Remove redundant references to V850EA architecture. - -2002-09-02 Alan Modra <amodra@bigpond.net.au> - - * arc-opc.c: Include bfd.h. - (arc_get_opcode_mach): Subtract off base bfd_mach value. - -2002-08-30 Alan Modra <amodra@bigpond.net.au> - - * v850-dis.c (disassemble): Remove bfd_mach_v850ea case. - - * mips-dis.c (_print_insn_mips): Don't use hard-coded mach constants. - -2002-08-28 Svein E. Seldal <Svein.Seldal@solidas.com> - - * configure.in: Added bfd_tic4x_arch. - * configure: Regenerate. - * Makefile.am: Added tic4x-dis.o target. - * Makefile.in: Regenerate. - -2002-08-28 Michael Hayes <m.hayes@elec.canterbury.ac.nz> - - * disassemble.c: Added tic4x target and c4x - disassembler routine. - * tic4x-dis.c: New file. - -2002-08-16 Christian Groessler <chris@groessler.org> - - * z8k-dis.c (unparse_instr): case CLASS_BA: Designate hex - values as those. - * z8kgen.c (opt): Fix definition of "in rd,imm16" opcode. - * z8k-opc.h: Regenerated with new z8kgen.c. - -2002-08-19 Elena Zannoni <ezannoni@redhat.com> - - From matthew green <mrg@redhat.com> - - * ppc-dis.c (powerpc_dialect): Support `-m500', `-m500x2' and - `-mefs'. Turn off AltiVec for E500 and efs. - (print_insn_powerpc): Don't print an AltiVec instruction if the - dialect is not efs. - - * ppc-opc.c (insert_pmrn, extract_pmrn, insert_ev2, extract_ev2, - insert_ev4, extract_ev4, insert_ev8, extract_ev8): New functions - for extracting pmrn/evld/evstd/etc operands. - (CRB, CRFD, CRFS, DC, RD): New instruction fields. - (CT): Make this equal to RD + 1. - (PMRN): New operand. - (RA): Update. - (EVUIMM, EVUIMM_2, EVUIMM_4, EVUIMM_8): New operands. - (WS): Update. - (EVSEL, EVSEL_MASK): New instruction form and mask for EVSEL. - (ISEL, ISEL_MASK): New instruction form and mask for ISEL. - (XISEL, XISEL_MASK): New instruction form and mask for ISEL. - (CTX, CTX_MASK): New instruction form and mask for context cache - instructions. - (UCTX, UCTX_MASK): New instruction form and mask for user context - cache instructions. - (XC, XC_MASK, XUC, XUC_MASK): New instruction forms. - (CLASSIC): New define. - (PPCESPE): New define. - (PPCISEL, , PPCBRLK, PPCPMR, PPCCHLK, PPCRFMI): New - defines for integer select, cache control, branch - locking, power management, cache locking and machine check - APU instructions, respectively. - (efsabs, efsnabs, efsneg, efsadd, efssub, efsmul, - efsdiv, efscmpgt, efscmplt, efscmpeq, efststgt, efststlt, - efststeq, efscfui, efsctuiz, efscfsi, efscfuf, efscfsf, - efsctui, efsctsi, efsctsiz, efsctuf, efsctsf, - evaddw, evaddiw, evsubfw, evsubifw, evabs, evneg, evextsb, - evextsh, evrndw, evcntlzw, evcntlsw, brinc, evand, evandc, evor, - evorc, evxor, eveqv, evnand, evnor, evrlw, evrlwi, evslw, evslwi, - evsrws, evsrwu, evsrwis, evsrwiu, evsplati, evsplatfi, evmergehi, - evmergelo, evmergehilo, evmergelohi, evcmpgts, evcmpgtu, evcmplts, - evcmpltu, evcmpeq, evsel, evldd, evlddx, evldw, evldwx, evldh, - evldhx, evlwhe, evlwhex, evlwhou, evlwhoux, evlwhos, evlwhosx, - evlwwsplat, evlwwsplatx, evlwhsplat, evlwhsplatx, evlhhesplat, - evlhhesplatx, evlhousplat, evlhousplatx, evlhossplat, evlhossplatx, - evstdd, evstddx, evstdw, evstdwx, evstdh, evstdhx, evstwwe, - evstwwex, evstwwo, evstwwox, evstwhe, evstwhex, evstwho, evstwhox, - evfsabs, evfsnabs, evfsneg, evfsadd, evfssub, evfsmul, evfsdiv, - evfscmpgt, evfscmplt, evfscmpeq, evfststgt, evfststlt, evfststeq, - evfscfui, evfsctuiz, evfscfsi, evfscfuf, evfscfsf, evfsctui, - evfsctsi, evfsctsiz, evfsctuf, evfsctsf, evsabs, evsnabs, evsneg, - evsadd, evssub, evsmul, evsdiv, evscmpgt, evsgmplt, evsgmpeq, - evststgt, evststlt, evststeq, evscfui, evscfsi, evscfuf, evscfsf, - evsctui, evsctuiz, evsctsi, evsctsiz, evsctuf, evsctsf, evmhossf, - evmhossfa, evmhosmf, evmhosmfa, evmhosmi, evmhosmia, evmhoumi, - evmhoumia, evmhessf, evmhessfa, evmhesmf, evmhesmfa, evmhesmi, - evmhesmia, evmheumi, evmheumia, evmhossfaaw, evmhossiaaw, - evmhosmfaaw, evmhosmiaaw, evmhousiaaw, evmhoumiaaw, evmhessfaaw, - evmhessiaaw, evmhesmfaaw, evmhesmiaaw, evmheusiaaw, evmheumiaaw, - evmhossfanw, evmhossianw, evmhosmfanw, evmhosmianw, evmhousianw, - evmhoumianw, evmhessfanw, evmhessianw, evmhesmfanw, evmhesmianw, - evmheusianw, evmheumianw, evmhogsmfaa, evmhogsmiaa, evmhogumiaa, - evmhegsmfaa, evmhegsmiaa, evmhegumiaa, evmhogsmfan, evmhogsmian, - evmhogumian, evmhegsmfan, evmhegsmian, evmhegumian, evmwhssf, - evmwhssfa, evmwhssfaa, evmwhssmaa, evmwhsmfaa, evmwhsmiaa, - evmwhusiaa, evmwhumiaa, evmwhssfan, evmwhssian, evmwhsmfan, - evmwhsmian, evmwhusian, evmwhumian, evmwhgssfaa, evmwhgsmfaa, - evmwhgsmiaa, evmwhgumiaa, evmwhgssfan, evmwhgsmfan, evmwhgsmian, - evmwhgumian, evmwhsmf, evmwhsmfa, evmshsmi, evmshsmia, evmshumi, - evmshumia, evmmlssf, evmmlssfa, evmwlsmf, evmwlsmfa, evmwlumi, - evmwlumia, evmwlssfaaw, evmwlssiaaw, evmwlsmfaaw, evmwlsmiaaw, - evmwlusiaaw, evmwlumiaaw, evmwissfanw, evmwissianw, evmwlsmfanw, - evmwlsmianw, evmwlusianw, evmwlumianw, evmwssf, evmwssfa, - evmwsmf, evmwsmfa, evmwsmi, evmwsmia, evmwumi, evmwumia, - evmwssfaa, evmwsmfaa, evmwsmiaa, evmwumiaa, evmwssfan, evmwsmfan, - evmwsmian, evmwumian, evaddssiaaw, evaddsmiaaw, evaddusiaaw, - evaddumiaaw, evsubfssiaaw, evsubfsmiaaw, evsubfusiaaw, - evsubfumiaaw, evmra, evdivws, evdivws): New e500x2 Core Complex - instructions. - (rfmci): New machine check APU instruction. - (isel): New integer select APU instructino. - (icbtls, icbtlse, icblc, icblce, dcbtls, dcbtlse, dcbtstls, - dcbtstlse, dcblc, dcblce): New cache control APU instructions. - (mtspefscr, mfspefscr): New instructions. - (mfpmr, mtpmr): New performance monitor APU instructions. - (savecontext): New context cache APU instructions. - (bblels, bbelr): New branch locking APU instructions. - (bblels, bbelr): New instructions. - (mftbl, mftbu, mftb): Set as CLASSIC instructions. Add BOOKE alias. - -2002-08-13 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-opc.c: Update call operand to accept the page definition. - Identify instructions that are branches and calls to generate a - RL_JUMP relocation. - -2002-08-13 Stephane Carrez <stcarrez@nerim.fr> - - * m68hc11-dis.c (print_insn): Take into account 68HC12 memory - banks and fix disassembling of call instruction. - (print_indexed_operand): New param to tell whether - it was an indirect addressing operand (for disassembling call). - -2002-08-09 Nick Clifton <nickc@redhat.com> - - * po/sv.po: Updated Swedish translation. - -2002-08-08 Maciej W. Rozycki <macro@ds2.pg.gda.pl> - - * mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as - aliases to "daddiu" and "addiu". - -2002-07-30 Nick Clifton <nickc@redhat.com> - - * po/sv.po: Updated Swedish translation. - -2002-07-25 Nick Clifton <nickc@redhat.com> - - * po/sv.po: Updated Swedish translation. - * po/es.po: Updated Spanish translation. - * po/pr_BR.po: Updated Brazilian Portuguese translation. - * po/tr.po: Updated Turkish translation. - * po/fr.po: Updated French translation. - -2002-07-24 Nick Clifton <nickc@redhat.com> - - * po/sv.po: Updated Swedish translation. - * po/es.po: Updated Spanish translation. - * po/pr_BR.po: Updated Brazilian Portuguese translation. - -2002-07-23 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2002-07-23 Nick Clifton <nickc@redhat.com> - - * po/fr.po: Updated French translation. - * po/pr_BR.po: New Brazilian Portuguese translation. - * po/id.po: Updated Indonesian translation. - * configure.in (LINGUAS): Add pr_BR. - * configure: Regenerate. - -2002-07-18 Denis Chertykov <denisc@overta.ru> - Frank Ch. Eigler <fche@redhat.com> - Alan Lehotsky <alehotsky@cygnus.com> - matthew green <mrg@redhat.com> - - * configure.in: Add support for ip2k. - * configure: Regenerate. - * Makefile.am: Add support for ip2k. - * Makefile.in: Regenerate. - * disassemble.c: Add support for ip2k. - * ip2k-asm.c: New generated file. - * ip2k-desc.c: New generated file. - * ip2k-desc.h: New generated file. - * ip2k-dis.c: New generated file. - * ip2k-ibld.c: New generated file. - * ip2k-opc.c: New generated file. - * ip2k-opc.h: New generated file. - -2002-07-17 David Mosberger <davidm@hpl.hp.com> - - * ia64-opc-b.c (bWhc): New macro. - (mWhc): Ditto. - (OpPaWhcD): Ditto. - (ia64_opcodes_b): Correct patterns for indirect call - instructions to use 3-bit "wh" field. - * ia64-asmtab.c: Regnerate. - -2002-07-09 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (mips_isa_type): Add MIPS16 insn handling. - * mips-opc.c (I16): New define. - (mips_builtin_opcodes): Make jalx an I16 insn. - -2002-06-18 Dave Brolley <brolley@redhat.com> - - * po/POTFILES.in: Add frv-*.[ch]. - * disassemble.c (ARCH_frv): New macro. - (disassembler): Handle bfd_arch_frv. - * configure.in: Support frv_bfd_arch. - * Makefile.am (HFILES): Add frv-*.h. - (CFILES): Add frv-*.c - (ALL_MACHINES): Add frv-*.lo. - (CLEANFILES): Add stamp-frv. - (FRV_DEPS): New variable. - (stamp-frv): New target. - (frv-asm.lo): New target. - (frv-desc.lo): New target. - (frv-dis.lo): New target. - (frv-ibld.lo): New target. - (frv-opc.lo): New target. - (frv-*.[ch]): New files. - -2002-06-18 Ben Elliston <bje@redhat.com> - - * Makefile.am (CGENDEPS): Remove unnecessary stamp-cgen. - * Makefile.in: Regenerate. - -2002-06-08 Alan Modra <amodra@bigpond.net.au> - - * a29k-dis.c: Replace CONST with const. - * h8300-dis.c: Likewise. - * m68k-dis.c: Likewise. - * or32-dis.c: Likewise. - * sparc-dis.c: Likewise. - -2002-06-04 Jason Thorpe <thorpej@wasabisystems.com> - - * configure.in: Add "sh5*-*" to list of targets which include - sh64 support. - * configure: Regenerate. - -2002-05-31 Chris G. Demetriou <cgd@broadcom.com> - - * mips-opc.c: Clean up a few whitespace issues, and sort a - few entries understanding that 'x' follows 'w' in the alphabet. - -2002-05-31 Chris G. Demetriou <cgd@broadcom.com> - Ed Satterthwaite <ehs@broadcom.com> - - * mips-opc.c: Add support for SB-1 MDMX subset and extensions. - -2002-05-31 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2002-05-30 Chris G. Demetriou <cgd@broadcom.com> - Ed Satterthwaite <ehs@broadcom.com> - - * mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y', - and 'Z' formats, for MDMX. - (mips_isa_type): Add MDMX instructions to the ISA - bit mask for bfd_mach_mipsisa64. - * mips-opc.c: Add support for MDMX instructions. - (MX): New definition. - - * mips-dis.c: Update copyright years to include 2002. - -2002-05-30 Diego Novillo <dnovillo@redhat.com> - - * d10v-opc.c (d10v_opcodes): `btsti' does not modify its - arguments. - -2002-05-28 Kuang Hwa Lin <kuang@sbcglobal.net> - - * configure.in: Add DLX configuraton support. - * configure: Regenerate. - * Makefile.am: Add DLX configuraton support. - * Makefile.in: Regenerate. - * disassemble.c: Add DLX support. - * dlx-dis.c: New file. - -2002-05-25 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am (sh-dis.lo): Don't put make commands in deps. - * Makefile.in: Regenerate. - * arc-dis.c: Use #include "" instead of <> for local header files. - * m68k-dis.c: Likewise. - -2002-05-22 J"orn Rennecke <joern.rennecke@superh.com> - - * Makefile.am (sh-dis.lo): Compile with @archdefs@. - * Makefile.in: regenerate. - - * sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4 - for disassembly. - -2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros. - -2002-05-17 J"orn Rennecke <joern.rennecke@superh.com> - - * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh. - * sh-dis.c (LITTLE_BIT): Delete. - (print_insn_sh, print_insn_shl): Deleted. - (print_insn_shx): Renamed to - (print_insn_sh). No longer static. Handle SHmedia instructions. - Use info->endian to determine endianness. - * sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete. - (print_insn_sh64x): No longer static. Renamed to - (print_insn_sh64). Removed pfun_compact and endian arguments. - If we got an uneven address to indicate SHmedia, adjust it. - Return -2 for SHcompact instructions. - -2002-05-17 Alan Modra <amodra@bigpond.net.au> - - * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools. - * configure.in: Invoke AM_INSTALL_LIBBFD. - * Makefile.am (install-data-local): Move to.. - (install_libopcodes): .. New target. - (uninstall_libopcodes): Likewise. - (install-bfdlibLTLIBRARIES): Likewise. - (uninstall-bfdlibLTLIBRARIES): Likewise. - (bfdlibdir): New. - (bfdincludedir): New. - (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES. - * aclocal.m4: Regenerate. - * configure: Regenerate. - * Makefile.in: Regenerate. - -2002-05-15 Nick Clifton <nickc@cambridge.redhat.com> - - * fr30-asm.c: Regenerate. - * fr30-desc.c: Regenerate. - * fr30-dis.c: Regenerate. - * m32r-asm.c: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-dis.c: Regenerate. - * openrisc-asm.c: Regenerate. - * openrisc-desc.c: Regenerate. - * openrisc-dis.c: Regenerate. - * xstormy16-asm.c: Regenerate. - * xstormy16-desc.c: Regenerate. - * xstormy16-dis.c: Regenerate. - -2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (is_newabi): EABI is not a NewABI. - -2002-05-13 Jason Thorpe <thorpej@wasabisystems.com> - - * configure.in (shle-*-*elf*): Include sh64 support. - * configure: Regenerate. - -2002-04-28 Jason Thorpe <thorpej@wasabisystems.com> - - * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode. - (print_insn_mode): Print some basic info about floating point values. - -2002-05-09 Anton Blanchard <anton@samba.org> - - * ppc-opc.c: Add "tlbiel" for POWER4. - -2002-05-07 Graydon Hoare <graydon@redhat.com> - - * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather - than just most-recently-opened. - -2002-05-01 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke. - -2002-04-24 Christian Groessler <chris@groessler.org> - - * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2 - bytes_per_chunk, 6 bytes_per_line for nicer display of the hex - codes. - (z8k_lookup_instr): CLASS_IGNORE case added. - (output_instr): Don't print hex codes, they are already - printed. - (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case - fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases. - (unparse_instr): Fix base and indexed addressing disassembly: - The index is inside the brackets. - * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines. - (opt): Fix shift left/right arithmetic/logical byte defines: - The high byte of the immediate word is ignored by the - processor. - Fix n parameter of ldm opcodes: The opcode contains (n-1). - (args): Fix "n" entry. - (toks): Add "nim4" and "iiii" entries. - * z8k-opc.h: Regenerated with new z8kgen.c. - -2002-04-24 Nick Clifton <nickc@cambridge.redhat.com> - - * po/id.po: New Indonesian translation. - * configure.in (ALL_LIGUAS): Add id.po - * configure: Regenerate. - -2002-04-17 matthew green <mrg@redhat.com> - - * ppc-opc.c (powerpc_opcode): Fix dssall operand list. - -2002-04-04 Alan Modra <amodra@bigpond.net.au> - - * dep-in.sed: Cope with absolute paths. - * Makefile.am (dep.sed): Subst TOPDIR. - Run "make dep-am". - * Makefile.in: Regenerate. - * ppc-opc.c: Whitespace. - * s390-dis.c: Fix copyright date. - -2002-03-23 matthew green <mrg@redhat.com> - - * ppc-opc.c (vmaddfp): Fix operand order. - -2002-03-21 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - -2002-03-21 Anton Blanchard <anton@samba.org> - - * ppc-opc.c: Add optional field to mtmsrd. - (MTMSRD_L, XRLARB_MASK): Define. - -2002-03-18 Jan Hubicka <jh@suse.cz> - - * i386-dis.c (prefix_name): Fix handling of 32bit address prefix - in 64bit mode. - (print_insn) Likewise. - (putop): Fix handling of 'E' - (OP_E, OP_OFF): handle 32bit addressing mode in 64bit. - (ptr_reg): Likewise. - -2002-03-18 Nick Clifton <nickc@cambridge.redhat.com> - - * po/fr.po: Updated version. - -2002-03-16 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (M3D): Tweak comment. - (mips_builtin_op): Add comment indicating that opcodes of the - same name must be placed together in the table, and sort - the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt", - "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name. - -2002-03-16 Nick Clifton <nickc@cambridge.redhat.com> - - * Makefile.am: Tidy up sh64 rules. - * Makefile.in: Regenerate. - -2002-03-15 Chris G. Demetriou <cgd@broadcom.com> - - * mips-dis.c: Update copyright years. - -2002-03-15 Chris G. Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA - bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add - comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that - indicate that they should dissassemble all applicable - MIPS-specified ASEs. - * mips-opc.c: Add support for MIPS-3D instructions. - (M3D): New definition. - - * mips-opc.c: Update copyright years. - -2002-03-15 Chris G. Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name. - -2002-03-15 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (is_newabi): Fix ABI decoding. - -2002-03-14 Chris G. Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32 - and bfd_mach_mipsisa64 cases to match the rest. - -2002-03-13 Nick Clifton <nickc@cambridge.redhat.com> - - * po/fr.po: Updated version. - -2002-03-13 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c: Add optional `L' field to tlbie. - (XRTLRA_MASK): Define. - -2002-03-06 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being - present on I4. - - * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps". - -2002-03-05 Paul Koning <pkoning@equallogic.com> - - * pdp11-opc.c: Fix "mark" operand type. Fix operand types - for float opcodes that take float operands. Add alternate - names (xxxD vs. xxxF) for float opcodes. - * pdp11-dis.c (print_operand): Clean up formatting for mode 67. - (print_foperand): New function to handle float opcode operands. - (print_insn_pdp11): Use print_foperand to disassemble float ops. - -2002-02-27 Nick Clifton <nickc@cambridge.redhat.com> - - * po/de.po: Updated. - -2002-02-26 Brian Gaeke <brg@dgate.org> - - * Makefile.am (install-data-local): Install dis-asm.h. - -2002-02-26 Nick Clifton <nickc@cambridge.redhat.com> - - * configure.in (LINGUAS): Add de.po. - * configure: Regenerate. - * po/de.po: New file. - -2002-02-25 Alan Modra <amodra@bigpond.net.au> - - * ppc-dis.c (powerpc_dialect): Handle power4 option. - * ppc-opc.c (insert_bdm): Correct description of "at" branch - hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour. - (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise. - (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc. - (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise. - (PPCCOM32, PPCCOM64): Delete. - (NOPOWER4, POWER4): Define. - (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4, - and PPCCOM4 with POWER4 so that "at" style branch hint opcodes - are enabled for power4 rather than ppc64. - -2002-02-20 Tom Rix <trix@redhat.com> - - * ppc-opc.c (powerpc_operands): Add WS field. Use for tlbre, tlbwe. - -2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-dis.c (init_disasm): Use renamed architecture defines. - -2002-02-19 matthew green <mrg@redhat.com> - - * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola - specific. - -2002-02-18 Nick Clifton <nickc@cambridge.redhat.com> - - * po/tr.po: Updated translation. - -2002-02-15 Richard Henderson <rth@redhat.com> - - * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo - disassembly mask. - -2002-02-15 Richard Henderson <rth@redhat.com> - - * alpha-opc.c (alpha_opcodes): Add simple pseudos for - lda, ldah, jmp, ret. - -2002-02-14 Nick Clifton <nickc@cambridge.redhat.com> - - * po/da.po: Updated translation. - -2002-02-12 Graydon Hoare <graydon@redhat.com> - - * cgen-asm.in (parse_insn_normal): Change call from - @arch@_cgen_parse_operand to cd->parse_operand, to - facilitate CGEN_ASM_INIT_HOOK doing useful work. - -2002-02-11 Alexandre Oliva <aoliva@redhat.com> - - * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not - sign-extended. - -2002-02-11 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: "make dep-am". - * Makefile.in: Regenerate. - * aclocal.m4: Regenerate. - * config.in: Regenerate. - * configure: Regenerate. - -2002-02-10 Hans-Peter Nilsson <hp@bitrange.com> - - * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64 - support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and - shl-*-linux*. - * configure: Regenerate. - -2002-02-10 Daniel Jacobowitz <drow@mvista.com> - - * cgen-dis.c: Add prototypes for count_decodable_bits - and add_insn_to_hash_chain. - -2002-02-08 Alexandre Oliva <aoliva@redhat.com> - - * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*. - * configure: Rebuilt. - -2002-02-08 Ivan Guzvinec <ivang@opencores.org> - - * or32-opc.c: Fix compile time warning messages. - * or32-dis.c: Fix compile time warning messages. - -2002-02-08 Alexandre Oliva <aoliva@redhat.com> - - Contribute sh64-elf. - 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com> - * sh64-opc.c: Regenerate. - 2001-03-13 DJ Delorie <dj@redhat.com> - * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its - purpose is more obvious. - * sh64-opc.c (shmedia_table): Ditto. - * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto. - (print_insn_shmedia): Ditto. - 2001-03-12 DJ Delorie <dj@redhat.com> - * sh64-opc.c: Adjust comments to reflect reality: replace bits - 3:0 with zeros (not "reserved"), replace "rrrrrr" with - "gggggg" for two-operand floating point opcodes. Remove - "fsina". - 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>: - Correct printing of .byte:s. Return number of printed bytes or - -1; never 0. - (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s - to next four-byte-alignment if insn or data is not aligned. - 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-dis.c: Update comments and fix comment formatting. - (initialize_shmedia_opcode_mask_table) <case A_IMMM>: - Abort instead of setting length to 0. - (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb, - crange_bsearch_cmpl, sh64_get_contents_type, - sh64_address_in_cranges): Move to bfd/elf32-sh64.c. - 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-opc.c: Remove #if 0:d entries for instructions not found in - SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo. - 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed - address with same prefix as SHcompact. - In the disassembler, use a .cranges section for linked executables. - * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file - and update for using structure in info->private_data. - (struct sh64_disassemble_info): New. - (is_shmedia_p): Delete. - (crange_qsort_cmpb): New function. - (crange_qsort_cmpl, crange_bsearch_cmpb): New functions. - (crange_bsearch_cmpl, sh64_address_in_cranges): New functions. - (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions. - (sh64_get_contents_type, sh64_address_is_shmedia): New functions. - (print_insn_shmedia): Correct displaying of address after MOVI/SHORI - pair. Display addresses for linked executables only. - (print_insn_sh64x_media): Initialize info->private_data by calling - init_sh64_disasm_info. - (print_insn_sh64x): Ditto. Find out type of contents by calling - sh64_contents_type_disasm. Display data regions using ".long" and - ".byte" similar to unrecognized opcodes. - 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA - information in section flags before considering symbols. Don't - assume an info->mach setting of bfd_mach_sh5 means SHmedia code. - * configure.in (bfd_sh_arch): Check presence of sh64 insns by - matching $target $canon_targets instead of looking at the - now-removed -DINCLUDE_SHMEDIA in $targ_cflags. - * configure: Regenerate. - 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-opc.c (shmedia_creg_table): New. - * sh64-opc.h (shmedia_creg_info): New type. - (shmedia_creg_table): Declare. - * sh64-dis.c (creg_name): New function. - (print_insn_shmedia): Use it. - * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map - bfd_mach_sh5 to print_insn_sh64 if big-endian and to - print_insn_sh64l if little-endian. - * sh64-dis.c (print_insn_shmedia): Make r unsigned. - (print_insn_sh64l): New. - (print_insn_sh64x): New. - (print_insn_sh64x_media): New. - (print_insn_sh64): Break out code to print_insn_sh64x and - print_insn_sh64x_media. - 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com> - * sh64-opc.h: New file - * sh64-opc.c: New file - * sh64-dis.c: New file - * Makefile.am: Add sh64 targets. - (HFILES): Add sh64-opc.h. - (CFILES): Add sh64-opc.c and sh64-dis.c. - (ALL_MACHINES): Add sh64 files. - * Makefile.in: Regenerate. - * configure.in: Add support for sh64 to bfd_sh_arch. - * configure: Regenerate. - * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define. - (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to - print_insn_sh64. - * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4. - * po/POTFILES.in: Regenerate. - * po/opcodes.pot: Regenerate. - -2002-02-04 Frank Ch. Eigler <fche@redhat.com> - - * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets. - -2002-02-04 Alexandre Oliva <aoliva@redhat.com> - - * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS. - -2002-02-01 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am" - * Makefile.in: Regenerate. - -2002-01-31 Ivan Guzvinec <ivang@opencores.org> - - * or32-dis.c: New file. - * or32-opc.c: New file. - * configure.in: Add support for or32. - * configure: Regenerate. - * Makefile.am: Add support for or32. - * Makefile.in: Regenerate. - * disassemble.c: Add support for or32. - * po/POTFILES.in: Regenerate. - * po/opcodes.pot: Regenerate. - -2002-01-27 Daniel Jacobowitz <drow@mvista.com> - - * configure: Regenerated. - -2002-01-26 Nick Clifton <nickc@cambridge.redhat.com> - - * po/fr.po: Updated version. - -2002-01-25 Nick Clifton <nickc@cambridge.redhat.com> - - * po/es.po: Updated version. - -2002-01-24 Nick Clifton <nickc@cambridge.redhat.com> - - * po/da.po: New version. - -2002-01-23 Nick Clifton <nickc@cambridge.redhat.com> - - * po/da.po: New file: Spanish translation. - * configure.in (ALL_LINGUAS): Add da. - * configure: Regenerate. - -2002-01-22 Graydon Hoare <graydon@redhat.com> - - * fr30-asm.c: Regenerate. - * fr30-desc.c: Likewise. - * fr30-desc.h: Likewise. - * fr30-dis.c: Likewise. - * fr30-ibld.c: Likewise. - * fr30-opc.c: Likewise. - * fr30-opc.h: Likewise. - * m32r-asm.c: Likewise. - * m32r-desc.c: Likewise. - * m32r-desc.h: Likewise. - * m32r-dis.c: Likewise. - * m32r-ibld.c: Likewise. - * m32r-opc.c: Likewise. - * m32r-opc.h: Likewise. - * m32r-opinst.c: Likewise. - * openrisc-asm.c: Likewise. - * openrisc-desc.c: Likewise. - * openrisc-desc.h: Likewise. - * openrisc-dis.c: Likewise. - * openrisc-ibld.c: Likewise. - * openrisc-opc.c: Likewise. - * openrisc-opc.h: Likewise. - * xstormy16-desc.c: Likewise. - -2002-01-22 Richard Henderson <rth@redhat.com> - - * alpha-dis.c (print_insn_alpha): Also mask the base opcode for - comparison. - -2002-01-22 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - -2002-01-19 Richard Earnshaw <rearnsha@arm.com> - - * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h. - * arm-dis.c (print_insn_arm): Don't handle 'h' case. - -2002-01-18 Keith Walker <keith.walker@arm.com> - - * arm-opc.h (arm_opcodes): Add bxj instruction. - -2002-01-17 Nick Clifton <nickc@cambridge.redhat.com> - - * po/opcodes.pot: Regenerate. - * po/fr.po: Regenerate. - * po/sv.po: Regenerate. - * po/tr.po: Regenerate. - -2002-01-16 Nick Clifton <nickc@cambridge.redhat.com> - - * po/tr.po: Import new version. - -2002-01-15 Richard Earnshaw <rearnsha@arm.com> - - * arm-opc.h (arm_opcodes): Add patterns for VFP instructions. - * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for - VFP bitfields. - -2002-01-10 matthew green <mrg@redhat.com> - - * xstormy16-asm.c: Regenerate. - * xstormy16-desc.c: Likewise. - * xstormy16-desc.h: Likewise. - * xstormy16-dis.c: Likewise. - * xstormy16-opc.c: Likewise. - * xstormy16-opc.h: Likewise. - -2002-01-07 Nick Clifton <nickc@cambridge.redhat.com> - - * po/es.po: New file: Spanish translation. - * configure.in (ALL_LINGUAS): Add es. - * configure: Regenerate. - -2001-12-31 Jeffrey A Law (law@redhat.com) - - * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers, - 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'. - Always emit a space after 'H'. - -2001-12-18 matthew green <mrg@redhat.com> - - * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY. - -2001-12-17 Richard Henderson <rth@redhat.com> - - * alpha-opc.c (unop): Encode with RB as $sp. - -2001-12-07 Geoffrey Keating <geoffk@redhat.com> - - * Makefile.am: Add support for xstormy16. - * Makefile.in: Regenerate. - * configure.in: Add support for xstormy16. - * configure: Regenerate. - * disassemble.c: Add support for xstormy16. - * xstormy16-asm.c: New generated file. - * xstormy16-desc.c: New generated file. - * xstormy16-desc.h: New generated file. - * xstormy16-dis.c: New generated file. - * xstormy16-ibld.c: New generated file. - * xstormy16-opc.c: New generated file. - * xstormy16-opc.h: New generated file. - -2001-12-06 Richard Henderson <rth@redhat.com> - - * alpha-opc.c (alpha_opcodes): Add wh64en. - -2001-12-04 Alexandre Oliva <aoliva@redhat.com> - - * d10v-opc.c (d10v_predefined_registers): Remove warnings - introduced in Nov 29's patch. - - * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of - unmatched register. - - * d10v-dis.c (print_operand): Disregard OPERAND_SP in register - predefined value. - - * d10v-opc.c (RSRC_NOSP): New macro. - (d10v_operands): Add it. - (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w". - -2001-11-29 Alexandre Oliva <aoliva@redhat.com> - - * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP. - (RSRC_SP): New macro. - (d10v_operands): Add it. - (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP. - -2001-11-23 Lars Brinkhoff <lars@nocrew.org> - - * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions. - Also, break out of the loop as soon as an instruction has been - printed. - -2001-11-17 matthew green <mrg@redhat.com> - - * ppc-opc.c (mfvrsave, mtvrsave): New instructions. - -2001-11-15 Alan Modra <amodra@bigpond.net.au> - - * po/POTFILES.in: Regenerate. - - * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC. - (insert_bat, extract_bat, insert_bba, extract_bba, - insert_bd, extract_bd, insert_bdm, extract_bdm, - insert_bdp, extract_bdp, valid_bo, - insert_bo, extract_bo, insert_boe, extract_boe, - insert_ds, extract_ds, insert_de, extract_de, - insert_des, extract_des, insert_li, extract_li, - insert_mbe, extract_mbe, insert_mb6, extract_mb6, - insert_nb, extract_nb, insert_nsi, extract_nsi, - insert_ral, insert_ram, insert_ras, - insert_rbs, extract_rbs, insert_sh6, extract_sh6, - insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param. - (extract_bd, extract_bdm, extract_bdp, - extract_ds, extract_des, - extract_li, extract_nsi): Implement sign extension without conditional. - (insert_bdm, extract_bdm, - insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints. - (extract_bdm, extract_bdp): Correct 32 bit validation. - (AT1_MASK, AT2_MASK): Define. - (BBOAT_MASK): Define. - (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define. - (BOFM64, BOFP64, BOTM64, BOTP64): Define. - (BODNZM64, BODNZP64, BODZM64, BODZP64): Define. - (PPCCOM32, PPCCOM64): Define. - (powerpc_opcodes): Modify existing 32 bit insns with branch hints - and add new patterns to implement 64 bit branches with hints. Move - booke instructions so they match before ppc64. - - * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for - 64 bit default targets, and parse "32" and "64" in options. - Formatting fixes. - (print_insn_powerpc): Pass dialect to operand->extract. - -2001-11-14 Dave Brolley <brolley@redhat.com> - - * cgen-dis.c (count_decodable_bits): New function. - (add_insn_to_hash_chain): New function. - (hash_insn_array): Call add_insn_to_hash_chain. - (hash_insn_list): Call add_insn_to_hash_chain. - * m32r-dis.c: Regenerated. - * fr30-dis.c: Regenerated. - -2001-11-14 Andreas Jaeger <aj@suse.de> - - * i386-dis.c (print_insn): Use x86-64 as option. - -2001-11-14 Alan Modra <amodra@bigpond.net.au> - - * disassemble.c (disassembler): Call print_insn_i386. - * i386-dis.c (SUFFIX_ALWAYS): Define. - (struct dis_private): Add orig_sizeflag. - (print_insn_i386): Make it a wrapper, calling.. - (print_insn): ..The old body of print_insn_i386. Avoid longjmp - warning without using volatile by moving orig_sizeflag to priv, - and removing inbuf. Parse disassembler_options. - (print_insn_i386_att, print_insn_i386_intel): Move initialisation - code to print_insn. - (putop): Remove #ifdef SUFFIX_ALWAYS. - -2001-11-11 Timothy Wall <twall@alum.mit.edu> - - * tic54x-dis.c: Use revised opcode structure. Export opcode - template lookup. - (has_lkaddr): Don't forget about Lmem insns. - * tic54x-opc.c: Add emulation trap. Parallel table now uses - standard opcode templates. - -2001-11-13 Zack Weinberg <zack@codesourcery.com> - - * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries - to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand - category instead of Ew. - -2001-11-12 Niraj Gupta <ngupta@zumanetworks.com> - - * m68k-opc.c: Fix definitions of wddata[bwl]. - -2001-11-09 Richard Sandiford <rsandifo@redhat.com> - - * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to - fit in the buffer, try to match the empty keyword. - -2001-11-09 Nick Clifton <nickc@cambridge.redhat.com> - - * cgen-ibld.in (extract_1): Fix badly placed #if 0. - * fr30-ibld.c: Regenerate. - * m32r-ibld.c: Regenerate. - * openrisc-ibld.c: Regenerate. - -2001-11-04 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (print_insn_mips): Remove spaces at end of line. - -2001-11-02 Nick Clifton <nickc@cambridge.redhat.com> - - * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr". - * configure: Regernate. - * po/fr.po: New file. - * po/sv.po: New file. - * po/tr.po: New file. - -2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr> - - * m68hc11-dis.c (print_insn): Fix disassembly of movb with a - constant as source. - -2001-10-30 Hans-Peter Nilsson <hp@bitrange.com> - - * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate - dependencies. - * Makefile.in: Regenerate. - * mmix-dis.c, mmix-opc.c: New files. - -2001-10-29 Kazu Hirata <kazu@hxi.com> - - * d30v-dis.c: Fix a comment typo. - -2001-10-23 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and - "bltzall" as writing GPR 31 (since they do). - - * mips-dis.c (print_insn_arg): Calculate info->target - where appropriate. - (print_insn_mips): Fill in instruction info. - (print_mips16_insn_arg): Remove unneded variable 'val'. - Removed duplicated instruction target calculations, - calculate once and print that result. Use same idiom for - masking the jump segment bits as is used in print_insn_arg. - -2001-10-20 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c (CT): Make it an optional operand. - -2001-10-17 Chris Demetriou <cgd@broadcom.com> - - * mips-dis.c (mips_isa_type): Make the ISA used to disassemble - SB-1 binaries include instructions specific to the SB-1. - * mips-opc.c (SB1): New definition. - (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps", - "recip.ps", "rsqrt.ps", and "sqrt.ps". - -2001-10-17 matthew green <mrg@redhat.com> - - * ppc-opc.c (STRM): New AltiVec operand. - (XDSS): New AltiVec instruction form. - (mtvscr): Correct operand list. - (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions. - -2001-10-17 Alan Modra <amodra@bigpond.net.au> - - * po/POTFILES.in: Regenerate. - -2001-10-13 matthew green <mrg@redhat.com> - - * ppc-opc.c (MO): New macro for MO field of mbar instruction. - (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr, - mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions. - -2001-10-13 Nick Clifton <nickc@cambridge.redhat.com> - - * cgen-ibld.in: Include safe-ctype.h in preference to - ctype.h. - * cgen-asm.in: Include safe-ctype.h in preference to - ctype.h. Fix formatting. Use ISSPACE instead of isspace and - TOLOWER instead of tolower. - (@arch@_cgen_build_insn_regex): Remove duplication of syntax - string elements in constructed regular expression. - * fr30-asm.c: Regenerate. - * fr30-desc.c: Regenerate. - * fr30-ibld.c: Regenerate. - * m32r-asm.c: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-ibld.c: Regenerate. - * openrisc-asm.c: Regenerate. - * openrisc-desc.c: Regenerate. - * openrisc-ibld.c: Regenerate. - * po/opcodes.pot: Regenerate. - -2001-10-12 matthew green <mrg@redhat.com> - - * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New - instruction field instruction/extraction functions for new BookE - DE form instructions. - (CT): New macro for CT field in an X form instruction. - (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form - instructions. - (PPC64): Don't include PPC_OPCODE_PPC. - (403): New opcode macro for PPC403 processors. - (BOOKE): New opcode macro for BookE processors. - (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions. - (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise. - (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise. - (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise. - (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise. - (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise. - (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise. - (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise. - (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise. - (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise. - (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise. - (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise. - (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise. - (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise. - - * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look - for a disassembler option of `booke', `booke32' or `booke64' to enable - BookE support in the disassembler. - -2001-10-12 John Healy <jhealy@redhat.com> - - * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8) - for the length when extracting the base part of the insn. - -2001-10-09 Bruno Haible <haible@clisp.cons.org> - - * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive - regular expression. Fix some formatting problems. - * fr30-asm.c: Regenerate. - * openrisc-asm.c: Regenerate. - * m32r-asm.c: Regenerate. - -2001-10-09 Christian Groessler <cpg@aladdin.de> - - * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly - of indirect register memory accesses to be same format the - assembler accepts. - -2001-10-09 Nick Clifton <nickc@cambridge.redhat.com> - - * sh-opc.h: Fix encoding of least significant nibble of the - DSP single data transfer instructions. - - * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP - instructions. - -2001-10-08 Nick Clifton <nickc@cambridge.redhat.com> - - * cgen-asm.in: Fix compile time warning messages in generated - C files. - * cgen-dis.in: The same. - * cgen-ibld.in: The same. - * fr30-asm.c: Regenerate. - * fr30-desc.c: Regenerate. - * fr30-dis.c: Regenerate. - * fr30-ibld.c: Regenerate. - * fr30-opc.c: Regenerate. - * m32r-asm.c: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-dis.c: Regenerate. - * m32r-ibld.c: Regenerate. - * m32r-opc.c: Regenerate. - * m32r-opinst.c Regenerate. - * openrisc-asm.c: Regenerate. - * openrisc-desc.c: Regenerate. - * openrisc-dis.c: Regenerate. - * openrisc-ibld.c: Regenerate. - * openrisc-opc.c: Regenerate. - * openrisc-opc.h: Regenerate. - * Makefile.in: Regenerate. - * po/POTFILES.in: Regenerate. - * po/opcodes.pot: Regenerate. - -2001-10-08 Aldy Hernandez <aldyh@redhat.com> - - * arm-opc.h (arm_opcodes): Add cirrus insns. - - * arm-dis.c (print_insn_arm): Add 'I' case. - -2001-10-03 Alan Modra <amodra@bigpond.net.au> - - * po/POTFILES.in: Regenerate. - * configure: Regenerate. - -2001-10-02 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am (Makefile): Depend on bfd/configure.in. - Run "make dep-am". - * Makefile.in: Regenerate. - -2001-09-30 John Healy <jhealy@redhat.com> - - * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits - calls to cgen_get_insn_value and cgen_put_insn_value calls. - (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call. - -2001-09-30 Hans-Peter Nilsson <hp@bitrange.com> - - * Makefile.am: Update dependencies with "make dep-am". - * Makefile.in: Regenerate. - -2001-09-26 Alan Modra <amodra@bigpond.net.au> - - * arc-dis.c: Formatting fixes. - (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE. - -2001-09-21 Bruno Haible <haible@clisp.cons.org> - - * arc-dis.c: Don't include <ctype.h>. - * openrisc-desc.c: Likewise. - * openrisc-ibld.c: Likewise. - -2001-09-20 Nick Clifton <nickc@cambridge.redhat.com> - - * fr30-opc.c: Fix compile time warning messages. - * i370-opc.c: Fix compile time warning messages. - * i960-dis.c: Fix compile time warning messages. - * m32r-asm.c: Fix compile time warning messages. - * m32r-desc.c: Fix compile time warning messages. - * m32r-dis.c: Fix compile time warning messages. - * m32r-ibld.c: Fix compile time warning messages. - * m32r-opc.c: Fix compile time warning messages. - * m32r-opinst.c: Fix compile time warning messages. - * ns32k-dis.c: Fix compile time warning messages. - * openrisc-asm.c: Fix compile time warning messages. - * openrisc-desc.c: Fix compile time warning messages. - * openrisc-dis.c: Fix compile time warning messages. - * openrisc-ibld.c: Fix compile time warning messages. - * openrisc-opc.c: Fix compile time warning messages. - * pdp11-dis.c: Fix compile time warning messages. - * tic54x-dis.c: Fix compile time warning messages. - * v850-opc.c: Fix compile time warning messages. - * vax-dis.c: Fix compile time warning messages. - * w65-opc.h: Fix compile time warning messages. - * z8k-opc.h: Fix compile time warning messages. - * z8kgen.c: Fix compile time warning messages. - -2001-09-19 Nick Clifton <nickc@cambridge.redhat.com> - - * arm-dis.c: Fix compile time warning messages. - * cgen-asm.c: Fix compile time warning messages. - * cgen-dis.c: Fix compile time warning messages. - * cris-dis.c: Fix compile time warning messages. - * d10v-dis.c: Fix compile time warning messages. - * fr30-asm.c: Fix compile time warning messages. - * fr30-desc.c: Fix compile time warning messages. - * fr30-dis.c: Fix compile time warning messages. - * fr30-ibld.c: Fix compile time warning messages. - -2001-09-18 Bruno Haible <haible@clisp.cons.org> - - * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>. - (cgen_parse_keyword): Use ISALNUM instead of isalnum. - * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>. - (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of - isalpha/tolower. - (cgen_keyword_add): Use ISALNUM instead of isalnum. - (hash_keyword_name): Use TOLOWER instead of tolower. - * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>. - (parse_insn_normal): Use TOLOWER/ISSPACE instead of - tolower/isspace. - (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace. - * fr30-desc.c: Don't include <ctype.h>. - * fr30-ibld.c: Likewise. - * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>. - (load_insn_classes, parse_resource_users, load_depfile): Use - ISSPACE instead of isspace. - * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>. - (parse_insn_normal): Use TOLOWER/ISSPACE instead of - tolower/isspace. - (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace. - * m32r-desc.c: Don't include <ctype.h>. - * m32r-ibld.c: Likewise. - * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>. - (parse_insn_normal): Use TOLOWER/ISSPACE instead of - tolower/isspace. - (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace. - -2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * Makefile.am: Add rules and dependencies to create the s/390 opcode - table out of s390-opc.txt automatically. - * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used. - * s390-mkopc.c (dumpTable): Change output to create a complete file. - * s390-opc.c: New improved opcode format macros and remove the - pregenerated opcode table. - * s390-opc.txt: Adapt to new improved opcode format macros. - -2001-09-14 David Schleef <ds@schleef.org> - - * ppc-opc.c (VXA, VXA_MASK): Fix mask bits. - -2001-09-04 Alan Modra <amodra@bigpond.net.au> - - * i386-dis.c (grps): Don't print the implicit al/ax/eax register - for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns. - -2001-08-31 Eric Christopher <echristo@redhat.com> - Jason Eckhardt <jle@redhat.com> - - * mips-dis.c: Add support for bfd_mach_mipsisa32 and - bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k, - bfd_mach_mips64. - -2001-08-31 Andreas Jaeger <aj@suse.de> - - * tic54x-opc.c: Add default initializers to avoid warnings. - - * arc-opc.c: Include "sysdep.h" to get stdio.h as include file. - * arc-ext.c: Likewise. - -2001-08-28 matthew green <mrg@redhat.com> - - * ppc-opc.c (icbt): Order correctly. - -2001-08-27 David Edelsohn <dje@watson.ibm.com> - Torbjorn Granlund <tege@swox.com> - - * ppc-opc.c (DS): Add PPC_OPERAND_DS flag. - (LS): Define. - (insert_ds): Complain if not a multiple of 4. - (XSYNC): Define. - (XSYNC_MASK): Define. - (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev", - "slbmfee". Modify "sync" to use XSYNC_MASK and LS. - -2001-08-26 Andreas Jaeger <aj@suse.de> - - * h8500-opc.h: Add default initializers to h8500_table to shut up - GCC warnings. - -2001-08-25 Andreas Jaeger <aj@suse.de> - - * tic54x-dis.c: Add unused attributes where needed. - - * z8k-dis.c (output_instr): Add unused attribute. - - * h8300-dis.c: Add missing prototypes. - (bfd_h8_disassemble): Make static. - - * cris-dis.c: Add missing prototype. - * h8500-dis.c: Likewise. - * m68hc11-dis.c: Likewise. - * pj-dis.c: Likewise. - * tic54x-dis.c: Likewise. - * v850-dis.c: Likewise. - * vax-dis.c: Likewise. - * w65-dis.c: Likewise. - * z8k-dis.c: Likewise. - - * d10v-dis.c: Add missing prototype. - (dis_long): Remove unused variable. - (dis_2_short): Likewise. - - * sh-dis.c: Add missing prototypes. - * v850-opc.c: Likewise. - Add unused attributes where needed. - - * ns32k-dis.c: Add missing prototypes. - (bit_extract_simple): Remove unused variable. - -2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-opc.c: Add "low or high" and "not low or high" - branch instructions for gcc 3.0. - * s390-opc.txt: Likewise. - -2001-08-21 Andreas Jaeger <aj@suse.de> - - * i960-dis.c: Add parameters for prototypes - (ctrl): Add unused attributes. - (cobr): Likewise. - (put_abs): Likewise. - - * mips-dis.c: Add missing prototypes. - * a29k-dis.c: Likewise. - * arc-dis.c: Likewise. - * ia64-opc.c: Likewise. - - * s390-dis.c: Add missing prototypes. - (init_disasm): Remove unused attribute since the parameter is - used. - -2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-opc.c (M1): Define. Reformatted Code. - (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps, - mtps, mtps. Typo. - -2001-08-16 Jonathan Larmour <jlarmour@redhat.com> - - * mips-opc.c: R3900s can support all branch likely INSN_MACROs where - the corresponding non-likely insn is in MIPS I. - -2001-08-13 Kazu Hirata <kazu@hxi.com> - - * mcore-dis.c: Fix formatting. - * mips-dis.c: Likewise. - * pj-dis.c: Likewise. - * z8k-dis.c: Likewise. - -2001-08-12 Richard Henderson <rth@redhat.com> - - * cgen-ibld.in (extract_normal): Match type of VALUE and MASK - to *VALUEP. Regenerate all cgen files. - -2001-08-10 Richard Sandiford <rsandifo@redhat.com> - - * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32 - argument. - * mips-opc.c (G6): Undefine. - (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro - as the first "move" alternative. - -2001-08-10 Andreas Jaeger <aj@suse.de> - - * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes - to build warnings. - * configure: Regenerate. - -2001-08-10 Alan Modra <amodra@bigpond.net.au> - - * ppc-opc.c: Revert 2001-08-08. - -2001-08-09 Alan Modra <amodra@bigpond.net.au> - - * dis-buf.c (generic_strcat_address): Add missing prototype. - #if 0 the functions as it is unused. - -2001-08-08 Alan Modra <amodra@bigpond.net.au> - - 1999-10-25 Torbjorn Granlund <tege@swox.com> - * ppc-opc.c: Include "bfd.h". - (powerpc_operands): Add new field for reloc type. - -2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (print_insn_arg): Don't use software integer registers - for coprocessor registers. - (get_mips_isa): Removed. - (is_newabi): New function, checks if NewABI is used. - (_print_insn_mips): Get distinction between old ABI and new ABI right. - -2001-08-01 Christian Groessler <cpg@aladdin.de> - - * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to - get stderr definition. - (internal, gas): Removed warnings. - (gas): Create a correct final entry for created array. - * z8k-opc.h: Recreated with new z8kgen. - -2001-07-28 Kazu Hirata <kazu@hxi.com> - - * i386-dis.c: Fix formatting. - -2001-07-28 Matthias Kramm <kramm@quiss.org> - - * i386-dis.c: Change formatting conventions for architecture - i386:intel to better match the format of various intel i386 - assemblers, like nasm, tasm or masm. - -2001-07-24 Alan Modra <amodra@bigpond.net.au> - - * Makefile.am: Update dependencies with "make dep-am". - * Makefile.in: Regenerate - -2001-07-24 Kazu Hirata <kazu@hxi.com> - - * alpha-dis.c: Fix formatting. - * cris-dis.c: Likewise. - * d10v-dis.c: Likewise. - * d30v-dis.c: Likewise. - * m10300-dis.c: Likewise. - * tic54x-dis.c: Likewise. - -2001-07-23 Kazu Hirata <kazu@hxi.com> - - * m68k-dis.c: Fix formatting. - * pj-dis.c: Likewise. - * s390-dis.c: Likewise. - * z8k-dis.c: Likewise. - -2001-07-21 Chris Demetriou <cgd@broadcom.com> - - * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s - into the rest of the surrounding definitions. - -2001-07-18 Alan Modra <amodra@bigpond.net.au> - - * i386-dis.c (grps): Print l or w suffix, and require mem modrm - for lgdt, lidt, sgdt, sidt. - -2001-07-13 Philip Blundell <philb@gnu.org> - - * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR. - -2001-07-12 Jeff Johnston <jjohnstn@redhat.com> - - * cgen-asm.in: Include "xregex.h" always to enable the libiberty - regex support. - (@arch@_cgen_build_insn_regex): New routine from Graydon. - (@arch@_cgen_assemble_insn): Add Graydon's code to use regex - to verify if it is worth parsing the insn as insn "x". Also update - error message when insn is not a recognized format of the insn vs - when the insn is completely unrecognized. - -2001-07-11 Frank Ch. Eigler <fche@redhat.com> - - * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of - bfd_get_bits. - * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect - non-zero CGEN_CPU_DESC->insn_chunk_bitsize. - -2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de> - - * i386-dis.c (set_op): Handle 64 bit and 32 bit mode. - (OP_J): Use bfd_vma for mask to work properly with 64 bits. - (op_address,op_riprel): Use bfd_vma to handle 64 bits. - -2001-07-05 Ben Elliston <bje@redhat.com> - - * Makefile.am (CPUDIR): Define. - (stamp-m32r): Update dependencies. - (stamp-fr30): Ditto. - (stamp-openrisc): Ditto. - * Makefile.in: Regenerate. - -2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net> - - * ppc-opc.c: Fix encoding of 'clf' instruction. - -2001-06-30 Geoffrey Keating <geoffk@redhat.com> - - * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT. - -2001-06-28 Geoffrey Keating <geoffk@redhat.com> - - * cgen-asm.c (cgen_parse_keyword): Allow any first character. - * cgen-opc.c (cgen_keyword_add): Ignore special first - character when building nonalpha_chars field. - -2001-06-24 Ben Elliston <bje@redhat.com> - - * m88k-dis.c: Format to conform to GNU coding standards. - -2001-06-23 Andreas Jaeger <aj@suse.de> - - * disassemble.c (disassembler_usage): Add unused attribute. - -2001-06-22 Eric Christopher <echristo@redhat.com> - - * mips-opc.c: Move prefx to start of the table. - -2001-06-22 Stacey Sheldon <ssheldon@Catena.com> - - * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST - instruction. - -2001-06-22 Pauli <pauli@moreton.com.au> - - * m68k-opc.c: Add wdebug instruction. - -2001-06-15 Aldy Hernandez <aldyh@redhat.com> - - * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc. - -2001-06-14 Geoffrey Keating <geoffk@redhat.com> - - * cgen-asm.c (cgen_parse_keyword): When looking for the - boundaries of a keyword, allow any special characters - that are actually in one of the allowed keyword. - * cgen-opc.c (cgen_keyword_add): Add any special characters - to the nonalpha_chars field. - -2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-opc.c: Add lgh instruction. - * s390-opc.txt: Likewise. - -2001-06-11 Alan Modra <amodra@bigpond.net.au> - - * i386-dis.c: Group function prototypes in one place. - (FLOATCODE): Redefine as 1. - (USE_GROUPS): Redefine as 2. - (USE_PREFIX_USER_TABLE): Redefine as 3. - (X86_64_SPECIAL): Define as 4. - (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2. - (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE. - (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete. - (dis386): New table combining above four tables. - (dis386_twobyte_att, dis386_twobyte_intel): Delete. - (dis386_twobyte): New table combining above two tables. - (x86_64_table): New table to handle x86_64. - (X86_64_0): Define. - (float_mem_att, float_mem_intel): Delet. - (float_mem): New table combining above two tables. - (print_insn_i386): Modify for above. - (dofloat): Likewise. - (putop): Handle '{', '|' and '}' to select alternative mnemonics. - Return 0 on success, 1 if no valid alternative. - (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax. - (putop <case 'T'>): Move to case 'U', and share case 'Q' code. - (putop <case 'I'>): Move to case 'T', and share case 'P' code. - (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg - if not 64-bit mode. - (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode. - (OP_I64): If not 64-bit mode, call OP_I. - OP_OFF64): If not 64-bit mode, call OP_OFF. - (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename - 'ignore'/'ignored' to 'bytemode'. - -2001-06-10 Alan Modra <amodra@bigpond.net.au> - - * configure.in: Sort 'ta' case statement. - * configure: Regenerate. - - * i386-dis.c (dis386_att): Add 'H' to conditional branch and - loop,jcxz insns. - (disx86_64_att): Likewise. - (dis386_twobyte_att): Likewise. - (print_insn_i386): Don't print branch hints as a prefix. - (putop): 'H' macro prints branch hints. - (get64): Kill compile warnings. - -2001-06-09 Alexandre Oliva <aoliva@redhat.com> - - * sh-opc.h (sh_table): Don't use empty initializers. - -2001-06-06 Christian Groessler <cpg@aladdin.de> - - * z8k-dis.c: Fix formatting. - (unpack_instr): Remove unused cases in switch statement. Add - safety abort() in default case. - (unparse_instr): Add safety abort() in default case. - -2001-06-06 Peter Jakubek <pjak@snafu.de> - - * m68k-dis.c (print_insn_m68k): Fix typo. - * m68k-opc.c (m68k_opcodes): Correct allowed operands for - mcf (ColdFire) div, rem and moveb instructions. - -2001-06-06 Alan Modra <amodra@bigpond.net.au> - - * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define. - (cond_jump_mode, loop_jcxz_mode): Define. - (dis386_att): Add cond_jump_flag and loop_jcxz_flag as - appropriate, and 'F' suffix to loop insns. - (disx86_64_att): Likewise. - (dis386_twobyte_att): Likewise. - (print_insn_i386): Don't output addr prefix for loop, jcxz insns. - Output data size prefix for long conditional jumps. Output cs and - ds branch hints. - (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'. - (OP_J): Don't make PREFIX_DATA used. - -2001-06-04 Alexandre Oliva <aoliva@redhat.com> - - * sh-opc.h (sh_table): Complete last element entry to avoid - compiler warning. - -2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (mips_isa_type): Add MIPS r12k support. - -2001-05-23 Alan Modra <amodra@one.net.au> - - * arc-opc.c: Whitespace changes. - -2001-05-18 Hans-Peter Nilsson <hp@axis.com> - - * cris-opc.c (cris_spec_regs): Add missing initializer field for - last element. - -2001-05-15 Frank Ch. Eigler <fche@redhat.com> - - * cgen-dis.in (extract_normal): Complete support for min<base case. - -2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * mips-dis.c (INSNLEN): Rename MAXLEN. - (std_reg_names): Replace by mips32_reg_names and mips64_reg_names. - (print_insn_arg): Remove $ prefix of register names. - (set_mips_isa_type): Remove. - (mips_isa_type): New function. - (get_mips_isa): New Function. - (print_insn_mips): Rename _print_insn_mips. - (_print_insn_mips): New function, contains code which was - duplicated in print_insn_big_mips and print_insn_little_mips. - (print_insn_big_mips): Moved code to _print_insn_mips. - (print_insn_little_mips): Likewise. - (print_mips16_insn_arg): Remove $ prefix of register names. - Print error message before abort. - -2001-05-14 J.T. Conklin <jtc@redback.com> - - * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of - simplified mnemonics used for setting PPC750-specific special - purpose registers. - -2001-05-12 H.J. Lu <hjl@gnu.org> - - * i386-dis.c (print_insn_i386): Always set `mod', `reg' and - `rm'. - -2001-05-12 Peter Targett <peter.targett@arccores.com> - - * arc-opc.c (arc_reg_names): Correct attribute for lp_count - register to r/w. Formatting fixes throughout file. - -2001-05-12 Alan Modra <amodra@one.net.au> - - * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and - movq operands. - (twobyte_has_modrm): Update table. - (need_modrm): Give it file scope. - (MODRM_CHECK): Define. - (dofloat): Use MODRM_CHECK. - (OP_E): Likewise. - (OP_EM): Likewise. - (OP_EX): Likewise. - -2001-05-07 Frank Ch. Eigler <fche@redhat.com> - - * cgen-dis.in (default_print_insn): Tolerate min<base instructions - even at end of a section. - * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions - by ignoring precariously-unpacked insn_value in favor of raw buffer. - -2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> - - * disassemble.c (disassembler_usage): Remove unused attribute. - -2001-05-04 Frank Ch. Eigler <fche@redhat.com> - - * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes. - -2001-05-04 Frank Ch. Eigler <fche@redhat.com> - - * cgen-dis.in (print_insn): Remove call to read_insn. Instead, - assume incoming buffer already has the base insn loaded. Handle - smaller-than-base instructions for variable-length case. - -2001-05-04 Alan Modra <amodra@one.net.au> - - * i386-dis.c (Ev, Ed): Remove duplicate define. - (Gd): Define. - (XS): Define. - (OP_XS): New function. - (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and - movmskp operands. - (dis386_twobyte_intel): Likewise. - (prefix_user_table): Use MS for maskmovq operand. - -2001-04-27 Johan Rydberg <jrydberg@opencores.org> - - * Makefile.am: Add OpenRISC target. - * Makefile.in: Regenerated. - - * disassemble.c (disassembler): Recognize the OpenRISC disassembly. - - * configure.in (bfd_openrisc_arch): Add target. - * configure: Regenerated. - - * openrisc-asm.c: New file. - * openrisc-desc.c: Likewise. - * openrisc-desc.h: Likewise. - * openrisc-dis.c: Likewise. - * openrisc-ibld.c: Likewise. - * openrisc-opc.c: Likewise. - * openrisc-opc.h: Likewise. - -2001-04-24 Christian Groessler <cpg@aladdin.de> - - * z8k-dis.c: add names of control registers (ctrl_names); - (seg_length): provides instruction length fixup for segmented - mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12, - CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases; - (unparse_intr): handle CLASS_PR, print addresses without '#' - * z8k-opc.h: re-created with new z8kgen - * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new - entries for ldctl/ldctlb instruction - -2001-04-06 Andreas Jaeger <aj@suse.de> - - * i386-dis.c: Add ffreep instruction. - -2001-03-30 Alexandre Oliva <aoliva@redhat.com> - - * ppc-opc.c (insert_mbe): Shift mask initializer as long. - -2001-03-24 Alan Modra <alan@linuxcare.com.au> - - * i386-dis.c (PREGRP25): Define. - (dis386_twobyte_att): Use here in place of "movntq" entry. - (dis386_twobyte_intel): Likewise. - (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq". - (PREGRP26): Define. - (dis386_twobyte_att): Use here. - (dis386_twobyte_intel): Likewise. - (prefix_user_table): Add PREGRP26 entry for "punpcklqdq". - (prefix_user_table <maskmovdqu>): XM operand, not MX. - (prefix_user_table): Cosmetic changes to "bad" entries. - -2001-03-23 Nick Clifton <nickc@redhat.com> - - * mips-opc.c: Remove extraneous whitespace. - * mips-dis.c: Remove extraneous whitespace. - -2001-03-22 Ben Elliston <bje@redhat.com> - - * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg - declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional. - * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused - to allay a compiler warning. - -2001-03-22 Alan Modra <alan@linuxcare.com.au> - - * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq. - (dis386_twobyte_intel): Likewise. - (twobyte_has_modrm): Set entry for paddq, psubq. - -2001-03-20 Patrick Macdonald <patrickm@redhat.com> - - * cgen-dis.in (print_insn_@arch@): Add support for target machine - determination via CGEN_COMPUTE_MACH. - * fr30-desc.c: Regenerate. - * fr30-dis.c: Regenerate. - * fr30-opc.h: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-dis.c: Regenerate. - * m32r-opc.h: Regenerate. - * m32r-opinst.c: Regenerate. - -2001-03-20 H.J. Lu <hjl@gnu.org> - - * configure.in: Remove the redundent AC_ARG_PROGRAM. - * configure: Rebuild. - -2001-03-19 Jim Wilson <wilson@redhat.com> - - * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and - notestr if larger than xsect. - (in_class): Handle format M5. - * ia64-asmtab.c: Regnerate. - -2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca> - - * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer - has more than one byte left to read. - -2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com> - - * s390-opc.c: Add new opcodes. Smooth out formatting. - * s390-opc.txt: Add new opcodes. - -2001-03-06 Nick Clifton <nickc@redhat.com> - - * arm-dis.c (print_insn_thumb): Compute destination address - of BLX(1) instruction by taking bit 1 from PC and not from bit - 0 of the offset. - -2001-03-06 Igor Shevlyakov <igor@windriver.com> - - * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs - so command line switches will work. - -2001-03-05 Dave Brolley <brolley@redhat.com> - - * fr30-asm.c: Regenerate. - * fr30-desc.c: Regenerate. - * fr30-desc.h: Regenerate. - * fr30-dis.c: Regenerate. - * fr30-ibld.c: Regenerate. - * fr30-opc.c: Regenerate. - * fr30-opc.h: Regenerate. - * m32r-asm.c: Regenerate. - * m32r-desc.c: Regenerate. - * m32r-desc.h: Regenerate. - * m32r-dis.c: Regenerate. - * m32r-ibld.c: Regenerate. - * m32r-opc.c: Regenerate. - * m32r-opc.h: Regenerate. - * m32r-opinst.c: Regenerate. - -2001-02-28 Igor Shevlyakov <igor@windriver.com> - - * m68k-opc.c: fix cpushl according to Motorola. Enable - bunch of instructions for Coldfire 5407 and add all new. - -2001-02-27 Alan Modra <alan@linuxcare.com.au> - - * configure.in (BFD_VERSION): Do without grep. - * configure: Regenerate. - * Makefile.am: Run "make dep-am". - * Makefile.in: Regenerate. - -2001-02-23 David Mosberger <davidm@hpl.hp.com> - - * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4". - * ia64-asmtab.c: Regenerate. - -2001-02-21 David Mosberger <davidm@hpl.hp.com> - - * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two - separate variants: one for IMM22 and the other for IMM14. - * ia64-asmtab.c: Regenerate. - -2001-02-21 Greg McGary <greg@mcgary.org> - - * cgen-opc.c (cgen_get_insn_value): Add missing `return'. - -2001-02-20 H.J. Lu <hjl@gnu.org> - - * Makefile.am (ia64-ic.tbl): Remove the target. - (ia64-raw.tbl): Likewise. - (ia64-waw.tbl): Likewise. - (ia64-war.tbl): Likewise. - (ia64-asmtab.c): Generate it in the source directory. - * Makefile.in: Regenerated. - -2001-02-18 lars brinkhoff <lars@nocrew.org> - - * Makefile.am: Add PDP-11 target. - * configure.in: Likewise. - * disassemble.c: Likewise. - * pdp11-dis.c: New file. - * pdp11-opc.c: New file. - -2001-02-14 Jim Wilson <wilson@redhat.com> - - * ia64-ic.tbl: Update from Intel. Add setf to fr-writers. - * ia64-asmtab.c: Regenerate. - -2001-02-12 Jan Hubicka <jh@suse.cz> - - * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison - instructions. - (putop): Handle 'Y' - -2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl> - - * mips-dis.c (print_insn_arg): Use top four bits of the address of - the following instruction not of the jump itself for the jump - target. - (print_mips16_insn_arg): Likewise. - -2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG> - - * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build - directory. - * Makefile.in: Regenerate. - -2001-02-09 Schwidefsky <schwidefsky@de.ibm.com> - - * Makefile.am: Add linux target for S/390. - * Makefile.in: Likewise. - * configure.in: Likewise. - * disassemble.c: Likewise. - * s390-dis.c: New file. - * s390-mkopc.c: New file. - * s390-opc.c: New file. - * s390-opc.txt: New file. - -2001-02-05 Jim Wilson <wilson@redhat.com> - - * ia64-asmtab.c: Revert 2000-12-16 change. - -2001-02-02 Patrick Macdonald <patrickm@redhat.com> - - * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS. - * m32r-desc.h: Regenerate. - -2001-02-01 Jan Hubicka <jh@suse.cz> - - * i386-dis.c (dis386_att, grps): Use 'T' for push/pop - (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax - -2001-01-14 Alan Modra <alan@linuxcare.com.au> - - * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types. - -2001-01-13 Nick Clifton <nickc@redhat.com> - - * disassemble.c: Remove spurious white space. - -2001-01-13 Jan Hubicka <jh@suse.cz> - - * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret - templates. - -2001-01-11 Peter Targett <peter.targett@arccores.com> - - * configure.in: Add arc-ext.lo for bfd_arc_arch selection. - * Makefile.am (C_FILES): Add arc-ext.c. - (ALL_MACHINES) Add arc-ext.lo. - (INCLUDES) Add opcode directory to list. - New dependency entry for arc-ext.lo. - * disassemble.c (disassembler): Correct call to - arc_get_disassembler. - * arc-opc.c: New update for ARC, including full base - instructions for ARC variants. - * arc-dis.h, arc-dis.c: New update for ARC, including - extensibility functionality. - * arc-ext.h, arc-ext.c: New files for handling extensibility. - -2001-01-10 Jan Hubicka <jh@suse.cz> - - * i386-dis.c (PREGRP15 - PREGRP24): New. - (dis386_twobyt): Add SSE2 instructions. - (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions. - (twobyte_uses_f3_prefix): ... this one. - (grps): Add SSE instructions. - (prefix_user_table): Add two new slots; add SSE2 instructions. - (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix; - Handle the REPNZ and Data16 prefixes as well; do proper lookup - to prefix_user_table. - (OP_E): Accept mfence and lfence as well. - (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions. - (OP_XMM): Support REX extensions. - (OP_EM): Likewise. - (OP_EX): Likewise. - -2001-01-09 Nick Clifton <nickc@redhat.com> - - * arm-dis.c (print_insn): Set pc to zero for instructions with - a reloc associated with them. - -2001-01-09 Jeff Johnston <jjohnstn@redhat.com> - - * cgen-asm.in (parse_insn_normal): Changed syn to be - CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn - as character to use CGEN_SYNTAX_CHAR macro and all comparisons - to '\0' to use 0 instead. - * cgen-dis.in (print_insn_normal): Ditto. - * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto. - -2001-01-05 Jan Hubicka <jh@suse.cz> - - * i386-dis.c: Add x86_64 support. - (rex): New static variable. - (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants. - (USED_REX): New macro. - (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros. - (OP_I64, OP_OFF64, OP_IMREG): New functions. - (OP_REG, OP_OFF): Declare. - (get64, get32, get32s): New functions. - (r??_reg): New constants. - (dis386_att): Change templates of instruction implicitly promoted - to 64bit; change e?? to RMe?? for unwind RM byte instructions. - (grps): Likewise. - (dis386_intel): Likewise. - (dixx86_64_att): New table based on dis386_att. - (dixx86_64_intel): New table based on dis386_intel. - (names64, names8rex): New global variable. - (names32, names16): Add extended registers. - (prefix_user_t): Recognize rex prefixes. - (prefix_name): Print REX prefixes nicely. - (op_riprel): New global variable. - (start_pc): Set type to bfd_vma. - (print_insn_i386): Detect the 64bit mode and use proper table; - move ckprefix after initializing the buffer; output unused rex prefixes; - output information about target of RIP relative addresses. - (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S'; - (print_operand_value): New function. - (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for - REX prefix and new modes. - (get64, get32s): New. - (get32): Return bfd_signed_vma type. - (set_op): Initialize the op_riprel. - * disassemble.c (disassembler): Recognize the x86-64 disassembly. - -2001-01-03 Richard Sandiford <r.sandiford@redhat.com> - - cgen-dis.in (read_insn): Use bfd_get_bits() - -2001-01-02 Richard Sandiford <rsandifo@redhat.com> - - * cgen-dis.c (hash_insn_array): Use bfd_put_bits(). - (hash_insn_list): Likewise - * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits(). - (extract_1): Use bfd_get_bits(). - (extract_normal): Apply sign extension to both extraction - methods. - * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits() - (cgen_put_insn_value): Use bfd_put_bits() - -2000-12-28 Frank Ch. Eigler <fche@redhat.com> - - * cgen-asm.in (parse_insn_normal): Print better error message for - instructions with missing operands. - -2000-12-21 Santeri Paavolainen <santtu@ssh.com> - - * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined. - -2000-12-16 Nick Clifton <nickc@redhat.com> - - * Makefile.in: Regenerate. - * aclocal.m4: Regenerate. - * config.in: Regenerate. - * configure.in: Add spacing. - * configure: Regenerate. - * ia64-asmtab.c: Regenerate. - * po/opcodes.pot: Regenerate. - -2000-12-12 Frank Ch. Eigler <fche@redhat.com> - - * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time - error messages over later parse-time ones. - -2000-12-12 Jim Wilson <wilson@redhat.com> - - * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode - argument. - * ia64-gen.c (insert_deplist): Cast sizeof result to int. - (print_dependency_table): Print NULL if semantics field not set. - (insert_opcode_dependencies): Mark cmp parameter as unused. - (print_main_table): Use fprintf_vma to print long long fields. - (main): Mark argv paramter as unused. Convert to old style definition. - * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int. - * ia64-asmtab.c: Regnerate. - -2000-12-09 Nick Clifton <nickc@redhat.com> - - * m32r-dis.c (print_insn): Prevent re-read of instruction from - wrong address. - - * fr30-dis.c: Regenerate. - -2000-12-08 Peter Targett <peter.targett@arccores.com> - - * configure.in: Add arc-ext.lo for bfd_arc_arch selection. - * Makefile.am (C_FILES): Add arc-ext.c. - (ALL_MACHINES) Add arc-ext.lo. - (INCLUDES) Add opcode directory to list. - New dependency entry for arc-ext.lo. - * disassemble.c (disassembler): Correct call to - arc_get_disassembler. - * arc-opc.c: New update for ARC, including full base - instructions for ARC variants. - * arc-dis.h, arc-dis.c: New update for ARC, including - extensibility functionality. - * arc-ext.h, arc-ext.c: New files for handling extensibility. - -2000-12-03 Chris Demetriou cgd@sibyte.com - - * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO, - MOD_HILO, and MOD_LO macros. - - * mips-opc.c (M1, M2): Delete. - (mips_builtin_opcodes): Remove all uses of M1. - - * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2 - instructions take "G" format second operands and use the - correct flags. - There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to - match. - Delete "sel" code operands from mfc1 and mtc1. - Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants - for dm[ft]c[023]. - -2000-12-03 Ed Satterthwaite ehs@sibyte.com and - Chris Demetriou cgd@sibyte.com - - * mips-opc.c (mips_builtin_opcodes): Finish additions - for MIPS32 support, and clean up existing entries for - aesthetics, consistency with the MIPS32 ISA, and - with consistency the rest of the table. - -2000-12-01 Nick Clifton <nickc@redhat.com> - - * mips16-opc.c (mips16_opcodes): Add initialiser for membership - field. - -2000-12-01 Chris Demetriou <cgd@sibyte.com> - - mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument - specifiers. Update 'B' for new constant names, and remove - 'm'. - mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop" - near the top of the array, so they are disassembled properly. - Enable "ssnop" for MIPS32. Add "break" variant with 20 bit - code for MIPS32. Update "clo" and "clz" to use 'U' operand - specifier. Add 'H' format specifier variants for "mfc1," - "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update - MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32 - "wait" variant which uses 'J' operand specifier. - - * mips-dis.c (set_mips_isa_type): Update to use - CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case. - Replace bfd_mach_mips4K with bfd_mach_mips32_4k case. - * mips-opc.c (I32): New constant for instructions added in - MIPS32. - (P4): Delete. - (mips_builtin_opcodes) Replace all uses of P4 with I32. - - * mips-dis.c (set_mips_isa_type): Add cases for - bfd_mach_mips5 and bfd_mach_mips64. - * mips-opc.c (I64): New definitions. - - * mips-dis.c (set_mips_isa_type): Add case for - bfd_mach_mips_sb1. - -2000-11-28 Hans-Peter Nilsson <hp@bitrange.com> - - * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned. - (print_insn_ppi): Make nib1, nib2, nib3 unsigned. - Initialize variable dc to NULL. - (print_insn_shx): Remove unused label d_reg_n. - -2000-11-24 Nick Clifton <nickc@redhat.com> - - * arm-opc.h: Add new opcode formatting parameter 'B'. - (arm_opcodes): Add XScale, v5, and v5te instructions. - (thumb_opcodes): Add v5t instructions. - - * arm-dis.c (print_insn_arm): Handle new 'B' format - parameter. - (print_insn_thumb): Decode BLX(1) instruction. - -2000-11-21 Chris Demetriou <cgd@sibyte.com> - - * mips-opc.c: Fix file header comment. - -2000-11-14 Hans-Peter Nilsson <hp@axis.com> - - * cris-dis.c (cris_get_disassembler): If abfd is NULL, return - print_insn_cris_with_register_prefix. - -2000-11-11 Alexandre Oliva <aoliva@redhat.com> - - * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0. - -2000-11-07 Matthew Green <mrg@redhat.com> - - * cgen-dis.in (print_insn): All insns which can fit into insn_value - must be loaded there in their entirety. - -2000-10-20 Jakub Jelinek <jakub@redhat.com> - - * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs. - (compute_arch_mask): Add v8plusb and v9b machines. - (print_insn_sparc): siam mode decoding, accept ASRs up to 25. - * sparc-opc.c: Support for Cheetah instruction set. - (prefetch_table): Add #invalidate. - -2000-10-16 Nick Clifton <nickc@redhat.com> - - * mcore-dis.c (imsk): Change mask for OC to 0xFE00. - -2000-10-06 Dave Brolley <brolley@redhat.com> - - * fr30-desc.h: Regenerate. - * m32r-desc.h: Regenerate. - * m32r-ibld.c: Regenerate. - -2000-10-05 Jim Wilson <wilson@redhat.com> - - * ia64-ic.tbl: Update from Intel. - * ia64-asmtab.c: Regenerate. - -2000-10-04 Kazu Hirata <kazu@hxi.com> - - * ia64-gen.c: Convert C++-style comments to C-style comments. - * tic54x-dis.c: Likewise. - -2000-09-29 Hans-Peter Nilsson <hp@axis.com> - - Changes to add dollar prefix to registers for files where user symbols - don't have a leading underscore. Fix formatting. - * cris-dis.c (REGISTER_PREFIX_CHAR): New. - (format_reg): Add parameter with_reg_prefix. All callers changed. - (print_with_operands): Ditto. - (print_insn_cris_generic): Renamed from print_insn_cris, add - parameter with_reg_prefix. - (print_insn_cris_with_register_prefix, - print_insn_cris_without_register_prefix, cris_get_disassembler): - New. - * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler. - -2000-09-22 Jim Wilson <wilson@redhat.com> - - * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for - gt, ge, ngt, and nge. - * ia64-asmtab.c: Regenerate. - - * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change. - * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP. - (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62". - * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update. - * ia64-asmtab.c: Regnerate. - -2000-09-13 Anders Norlander <anorland@acc.umu.se> - - * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores. - Add mfc0 and mtc0 with sub-selection values. - Add clo and clz opcodes. - Add msub and msubu instructions for MIPS32. - Add madd/maddu aliases for mad/madu for MIPS32. - Support wait, deret, eret, movn, pref for MIPS32. - Support tlbp, tlbr, tlbwi, tlbwr. - (P4): New define. - - * mips-dis.c (print_insn_arg): Print sdbbp 'm' args. - (print_insn_arg): Handle 'H' args. - (set_mips_isa_type): Recognize 4K. - Use CPU_* defines instead of hardcoded numbers. - -2000-09-11 Catherine Moore <clm@redhat.com> - - * d30v-opc.c (d30v_operand_t): New operand type Rb2. - (d30v_format_tab): Use Rb2 for modinc and moddec. - -2000-09-07 Catherine Moore <clm@redhat.com> - - * d30v-opc.c (d30v_format_tab): Use format Ra for - modinc and moddec. - -2000-09-06 Alexandre Oliva <aoliva@redhat.com> - - * configure: Rebuilt with new libtool.m4. - -2000-09-05 Nick Clifton <nickc@redhat.com> - - * configure: Regenerate. - * po/opcodes.pot: Regenerate. - -2000-08-31 Alexandre Oliva <aoliva@redhat.com> - - * acinclude.m4: Include libtool and gettext macros from the - top level. - * aclocal.m4, configure: Rebuilt. - -2000-08-30 Kazu Hirata <kazu@hxi.com> - - * tic80-dis.c: Fix formatting. - -2000-08-29 Kazu Hirata <kazu@hxi.com> - - * w65-dis.c: Fix formatting. - -2000-08-28 Mark Hatle <mhatle@mvista.com> - - * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics. - (powerpc_opcodes): Add table entries for PPC 405 instructions. - Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403 - instructions. Added extended mnemonic mftbl as defined in the - 405GP manual for all PPCs. - -2000-08-28 Jim Wilson <wilson@redhat.com> - - * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode - call. Change last goto to use failed instead of done. - -2000-08-28 Dave Brolley <brolley@redhat.com> - - * cgen-ibld.in (cgen_put_insn_int_value): New function. - (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P. - (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P. - (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P. - * cgen-dis.in (read_insn): New static function. - (print_insn): Use read_insn to read the insn into the buffer and set - up for disassembly. - (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is - in the buffer. - * fr30-asm.c: Regenerated. - * fr30-desc.c: Regenerated. - * fr30-desc.h: Regenerated. - * fr30-dis.c: Regenerated. - * fr30-ibld.c: Regenerated. - * fr30-opc.c: Regenerated. - * fr30-opc.h: Regenerated. - * m32r-asm.c: Regenerated. - * m32r-desc.c: Regenerated. - * m32r-desc.h: Regenerated. - * m32r-dis.c: Regenerated. - * m32r-ibld.c: Regenerated. - * m32r-opc.c: Regenerated. - -2000-08-28 Kazu Hirata <kazu@hxi.com> - - * tic30-dis.c: Fix formatting. - -2000-08-27 Kazu Hirata <kazu@hxi.com> - - * sh-dis.c: Fix formatting. - -2000-08-24 David Edelsohn <dje@watson.ibm.com> - - * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd. - -2000-08-24 Kazu Hirata <kazu@hxi.com> - - * z8k-dis.c: Fix formatting. - -2000-08-16 Jim Wilson <wilson@redhat.com> - - * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete - break, mov-immediate, nop. - * ia64-opc-f.c: Delete fpsub instructions. - * ia64-opc-m.c: Add POSTINC to all instructions with postincrement - address operand. Rewrite using macros to avoid long lines. - * ia64-opc.h (POSTINC): Define. - * ia64-asmtab.c: Regenerate. - -2000-08-15 Jim Wilson <wilson@redhat.com> - - * ia64-ic.tbl: Add missing entries. - -2000-08-08 Jason Eckhardt <jle@redhat.com> - - * i860-dis.c (print_br_address): Change third argument from int - to long. - -2000-08-07 Richard Henderson <rth@redhat.com> - - * ia64-dis.c (print_insn_ia64): Get byte skip count correct - for MLI templates. Handle IA64_OPND_TGT64. - -2000-08-04 Ben Elliston <bje@redhat.com> - - * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files. - * cgen.sh: Likewise. - -2000-08-02 Jim Wilson <wilson@redhat.com> - - * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end. - -2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl> - - * avr-dis.c (avr_operand): Use PARAMS macro in declaration. - Change return type from void to int. Check the combination - of operands, return 1 if valid. Fix to avoid BUF overflow. - Report undefined combinations of operands in COMMENT. - Report internal errors to stderr. Output the adiw/sbiw - constant operand in both decimal and hex. - (print_insn_avr): Disassemble ldd/std with displacement of 0 - as ld/st. Check avr_operand () return value, handle invalid - combinations of operands like unknown opcodes. - -2000-07-28 Ben Elliston <bje@redhat.com> - - * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New. - (run-cgen, stamp-m32r, stamp-fr30): New targets. - * Makefile.in: Regenerate. - * configure.in: Add --enable-cgen-maint option. - * configure: Regenerate. - -2000-07-26 Dave Brolley <brolley@redhat.com> - - * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned. - (cgen_hw_lookup_by_num): Ditto. - (cgen_operand_lookup_by_name): Ditto. - (print_address): Ditto. - (print_keyword): Ditto. - * cgen-dis.c (hash_insn_array): Mark unused parameters with - ATTRIBUTE_UNUSED. - * cgen-asm.c (hash_insn_array): Mark unused parameters with - ATTRIBUTE_UNUSED. - (cgen_parse_keyword): Ditto. - -2000-07-22 Jason Eckhardt <jle@redhat.com> - - * i860-dis.c: New file. - (print_insn_i860): New function. - (print_br_address): New function. - (sign_extend): New function. - (BITWISE_OP): New macro. - (I860_REG_PREFIX): New macro. - (grnames, frnames, crnames): New structures. - - * disassemble.c (ARCH_i860): Define. - (disassembler): Add check for bfd_arch_i860 to set disassemble - function to print_insn_i860. - - * Makefile.in (CFILES): Added i860-dis.c. - (ALL_MACHINES): Added i860-dis.lo. - (i860-dis.lo): New dependences. - - * configure.in: New bits for bfd_i860_arch. - - * configure: Regenerated. - -2000-07-20 Hans-Peter Nilsson <hp@axis.com> - - * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c. - (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo. - (cris-dis.lo, cris-opc.lo): New rules. - * Makefile.in: Rebuild. - * configure.in (bfd_cris_arch): New target. - * configure: Rebuild. - * disassemble.c (ARCH_cris): Define. - (disassembler): Support ARCH_cris. - * cris-dis.c, cris-opc.c: New files. - * po/POTFILES.in, po/opcodes.pot: Regenerate. - -2000-07-11 Jakub Jelinek <jakub@redhat.com> - - * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2. - Reported by Bill Clarke <llib@computer.org>. - -2000-07-09 Geoffrey Keating <geoffk@redhat.com> - - * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw. - Patch by Randall J Fisher <rfisher@ecn.purdue.edu>. - -2000-07-09 Alan Modra <alan@linuxcare.com.au> - - * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg, - fput_const, extract_3, extract_5_load, extract_5_store, - extract_5r_store, extract_5R_store, extract_10U_store, - extract_5Q_store, extract_11, extract_14, extract_16, extract_21, - extract_12, extract_17, extract_22): Prototype. - (print_insn_hppa): Rename inner block opcode -> opc to avoid - shadowing outer block. - (GET_BIT): Define. - -2000-07-05 DJ Delorie <dj@redhat.com> - - * MAINTAINERS: new - -2000-07-04 Alexandre Oliva <aoliva@redhat.com> - - * arm-dis.c (print_insn_arm): Output combinations of PSR flags. - -2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl> - - * avr-dis.c (avr_operand): Change _ () to _() around all strings - marked for translation (exception from the usual coding style). - (print_insn_avr): Initialize insn2 to avoid warnings. - -2000-07-03 Kazu Hirata <kazu@hxi.com> - - * h8300-dis.c (bfd_h8_disassemble): Improve readability. - * h8500-dis.c: Fix formatting. - -2000-07-01 Alan Modra <alan@linuxcare.com.au> - - * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed - (CLEANFILES): Add DEPA. - * Makefile.in: Regenerate. - -2000-06-26 Scott Bambrough <scottb@netwinder.org> - - * arm-dis.c (regnames): Add an additional register set to match - the set used by GCC. Make it the default. - -2000-06-22 Alan Modra <alan@linuxcare.com.au> - - * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we - find one. - * Makefile.in: Regenerate. - -2000-06-20 H.J. Lu <hjl@gnu.org> - - * Makefile.am: Rebuild dependency. - * Makefile.in: Rebuild. - -2000-06-18 Stephane Carrez <stcarrez@worldnet.fr> - - * Makefile.in, configure: regenerate - * disassemble.c (disassembler): Recognize ARCH_m68hc12, - ARCH_m68hc11. - * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12): - New functions. - * configure.in: Recognize m68hc12 and m68hc11. - * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x - * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly - and opcode generation for m68hc11 and m68hc12. - -2000-06-16 Nick Duffek <nsd@redhat.com> - - * disassemble.c (disassembler): Refer to the PowerPC 620 using - bfd_mach_ppc_620 instead of 620. - -2000-06-12 Kazu Hirata <kazu@hxi.com> - - * h8300-dis.c: Fix formatting. - (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl] - correctly. - -2000-06-09 Denis Chertykov <denisc@overta.ru> - - * avr-dis.c (avr_operand): Bugfix for jmp/call address. - -2000-06-07 Denis Chertykov <denisc@overta.ru> - - * avr-dis.c: completely rewritten. - -2000-06-02 Kazu Hirata <kazu@hxi.com> - - * h8300-dis.c: Follow the GNU coding style. - (bfd_h8_disassemble) Fix a typo. - -2000-06-01 Kazu Hirata <kazu@hxi.com> - - * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo. - (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl] - correctly. Fix a typo. - -2000-05-31 Nick Clifton <nickc@redhat.com> - - * opintl.h (_(String)): Explain why dgettext is used instead of - gettext. - -2000-05-30 Nick Clifton <nickc@redhat.com> - - * opintl.h (gettext, dgettext, dcgettext, textdomain, - bindtextdomain): Replace defines with those from intl/libgettext.h - to quieten gcc warnings. - -2000-05-26 Alan Modra <alan@linuxcare.com.au> - - * Makefile.am: Update dependencies with "make dep-am" - * Makefile.in: Regenerate. - -2000-05-25 Alexandre Oliva <aoliva@redhat.com> - - * m10300-dis.c (disassemble): Don't assume 32-bit longs when - sign-extending operands. - -2000-05-15 Donald Lindsay <dlindsay@redhat.com> - - * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches - except brf's. - -2000-05-21 Nick Clifton <nickc@redhat.com> - - * Makefile.am (LIBIBERTY): Define. - -2000-05-19 Diego Novillo <dnovillo@redhat.com> - - * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES. - (STD_REGISTER_NAMES): New name for REGISTER_NAMES. - (reg_names): Rename to std_reg_names. Change it to a char ** - static variable. - (std_reg_names): New name for reg_names. - (set_mips_isa_type): Set reg_names to point to std_reg_names by - default. - -2000-05-16 Frank Ch. Eigler <fche@redhat.com> - - * fr30-desc.h: Partially regenerated to account for changed - CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros. - * m32r-desc.h: Ditto. - -2000-05-15 Nick Clifton <nickc@redhat.com> - - * arm-opc.h: Use upper case for flasg in MSR and MRS - instructions. Allow any bit to be set in the field_mask of - the MSR instruction. - - * arm-dis.c (print_insn_arm): Decode _x and _s bits of the - field_mask of an MSR instruction. - -2000-05-11 Thomas de Lellis <tdel@windriver.com> - - * arm-opc.h: Disassembly of thumb ldsb/ldsh - instructions changed to ldrsb/ldrsh. - -2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com> - - * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit - target addresses for 'jal' and 'j'. - -2000-05-10 Geoff Keating <geoffk@redhat.com> - - * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes - also available in common mode when powerpc syntax is being used. - -2000-05-08 Alan Modra <alan@linuxcare.com.au> - - * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args. - (dummy_print_address): Ditto. - -2000-05-04 Timothy Wall <twall@redhat.com> - - * tic54x-opc.c: New. - * tic54x-dis.c: New. - * disassemble.c (disassembler): Add ARCH_tic54x. - * configure.in: Added tic54x target. - * configure: Ditto. - * Makefile.am: Add tic54x dependencies. - * Makefile.in: Ditto. - -2000-05-03 J.T. Conklin <jtc@redback.com> - - * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for - vector unit operands. - (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector - unit instruction formats. - (PPCVEC): New macro, mask for vector instructions. - (powerpc_operands): Add table entries for above operand types. - (powerpc_opcodes): Add table entries for vector instructions. - - * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask. - (print_insn_little_powerpc): Likewise. - (print_insn_powerpc): Prepend 'v' when printing vector registers. - -2000-04-24 Clinton Popetz <cpopetz@redhat.com> - - * configure.in: Add bfd_powerpc_64_arch. - * disassemble.c (disassembler): Use print_insn_big_powerpc for - 64 bit code. - -2000-04-24 Nick Clifton <nickc@redhat.com> - - * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow - field. - -2000-04-23 Denis Chertykov <denisc@overta.ru> - - * avr-dis.c (reg_fmul_d): New. Extract destination register from - FMUL instruction. - (reg_fmul_r): New. Extract source register from FMUL instruction. - (reg_muls_d): New. Extract destination register from MULS instruction. - (reg_muls_r): New. Extract source register from MULS instruction. - (reg_movw_d): New. Extract destination register from MOVW instruction. - (reg_movw_r): New. Extract source register from MOVW instruction. - (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU, - EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions. - -2000-04-22 Timothy Wall <twall@redhat.com> - - * ia64-gen.c (general): Add an ordered table of primary - opcode names, as well as priority fields to disassembly data - structures to enforce a preferred disassembly format based on the - ordering of the opcode tables. - (load_insn_classes): Show a useful message if IC tables are missing. - (load_depfile): Ditto. - * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to - distinguish preferred disassembly. - * ia64-opc-f.c: Reorder some insn for preferred disassembly - format. Fix incorrect flag on fma.s/fma.s.s0. - * ia64-opc.c: Scan *all* disassembly matches and use the one with - the highest priority. - * ia64-opc-b.c: Use more abbreviations. - * ia64-asmtab.c: Regenerate. - -2000-04-21 Jason Eckhardt <jle@redhat.com> - - * hppa-dis.c (extract_16): New function. - (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of - new operand types l,y,&,fe,fE,fx. - -2000-04-21 Richard Henderson <rth@redhat.com> - David Mosberger <davidm@hpl.hp.com> - Timothy Wall <twall@redhat.com> - Bob Manson <manson@charmed.cygnus.com> - Jim Wilson <wilson@redhat.com> - - * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h. - (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, - ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c, - ia64-asmtab.c. - (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo. - (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen, - ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules. - * Makefile.in: Rebuild. - * configure Rebuild. - * configure.in (bfd_ia64_arch): New target. - * disassemble.c (ARCH_ia64): Define. - (disassembler): Support ARCH_ia64. - * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl, - ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c, - ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl, - ia64-war.tbl, ia64-waw.tbl: New files. - -2000-04-20 Alexandre Oliva <aoliva@redhat.com> - - * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define. - (disassemble): Use them. - -2000-04-14 Alan Modra <alan@linuxcare.com.au> - - * sysdep.h: Include "ansidecl.h" not <ansidecl.h> - * Makefile.am: Update dependencies. - * Makefile.in: Regenerate. - -2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG> - - * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c, - avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c, - disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c, - i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c, - m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c, - mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c, - ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c, - tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c, - w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove - ansidecl.h as sysdep.h includes it. - -2000-04-7 Andrew Cagney <cagney@b1.redhat.com> - - * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add - --enable-build-warnings option. - * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions. - * Makefile.in, configure: Re-generate. - -2000-04-05 J"orn Rennecke <amylaar@redhat.com> - - * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs. - stc GBR,@-<REG_N> is available for arch_sh1_up. - Group parallel processing insn with identical mnemonics together. - Make three-operand psha / pshl come first. - -2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk> - - * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4. - Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT. - (sh_arg_type): Add A_PC. - (sh_table): Update entries using immediates. Add repeat. - * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4. - Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT. - -2000-04-04 Alan Modra <alan@linuxcare.com.au> - - * po/opcodes.pot: Regenerate. - - * Makefile.am (MKDEP): Use gcc -MM rather than mkdep. - (DEP): Quote when passing vars to sub-make. Add warning message - to end. - (DEP1): Rewrite for "gcc -MM". - (CLEANFILES): Add DEP2. - Update dependencies. - * Makefile.in: Regenerate. - -2000-04-03 Denis Chertykov <denisc@overta.ru> - - * avr-dis.c: Syntax cleanup. - (add0fff): Print the pc relative address as a signed number. - (add03f8): Likewise. - -2000-04-01 Ian Lance Taylor <ian@zembu.com> - - * disassemble.c (disassembler_usage): Don't use a prototype. Mark - the parameter ATTRIBUTE_UNUSED. - * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed. - -2000-04-01 Alexandre Oliva <aoliva@redhat.com> - - * m10300-opc.c: SP-based offsets are always unsigned. - -2000-03-29 Thomas de Lellis <tdel@windriver.com> - - * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal" - [branch always] instead of "undefined". - -2000-03-27 Nick Clifton <nickc@redhat.com> - - * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of - short instructions, from end of list of long instructions. - -2000-03-27 Ian Lance Taylor <ian@zembu.com> - - * Makefile.am (CFILES): Add avr-dis.c. - (ALL_MACHINES): Add avr-dis.lo. - -2000-03-27 Alan Modra <alan@linuxcare.com> - - * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to - truncate integers. - (print_insn_avr): Call function via pointer in K&R compatible way. - (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204, - add0fff, add03f8): Convert to old style function declaration and - add prototype. - (avrdis_opcode): Add prototype. - -2000-03-27 Denis Chertykov <denisc@overta.ru> - - * avr-dis.c: New file. AVR disassembler. - * configure.in (bfd_avr_arch): New architecture support. - * disassemble.c: Likewise. - * configure: Regenerate. - -2000-03-06 J"oern Rennecke <amylaar@redhat.com> - - * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement. - -2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk> - - * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand - flag to determine if operand is pc-relative. - * d30v-opc.c: - (d30v_format_table): - (REL6S3): Renamed from IMM6S3. - Added flag OPERAND_PCREL. - (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with - added flag OPERAND_PCREL. - (IMM12S3U): Replaced with REL12S3. - (SHORT_D2, LONG_D): Delay target is pc-relative. - (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r): - Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r, - using the REL* operands. - (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D. - (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B, - LONG_Db, using REL* operands. - (SHORT_U, SHORT_A5S): Removed stray alternatives. - (d30v_opcode_table): Use new *r formats. - -2000-02-28 Nick Clifton <nickc@redhat.com> - - * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with - 'signed_overflow_ok_p'. - -2000-02-27 Eli Zaretskii <eliz@is.elta.co.il> - - * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the - name of the libtool directory. - * Makefile.in: Rebuild. - -2000-02-24 Nick Clifton <nickc@redhat.com> - - * cgen-opc.c (cgen_set_signed_overflow_ok): New function. - (cgen_clear_signed_overflow_ok): New function. - (cgen_signed_overflow_ok_p): New function. - -2000-02-23 Andrew Haley <aph@redhat.com> - - * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c, - m32r-ibld.c, m32r-opc.h: Rebuild. - -2000-02-23 Linas Vepstas <linas@linas.org> - - * i370-dis.c, i370-opc.c: New. - - * disassemble.c (ARCH_i370): Define. - (disassembler): Handle it. - - * Makefile.am: Add support for Linux/IBM 370. - * configure.in: Likewise. - - * Makefile.in: Regenerate. - * configure: Likewise. - -2000-02-22 Chandra Chavva <cchavva@redhat.com> - - * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to - ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel - procedure. - -2000-02-22 Andrew Haley <aph@redhat.com> - - * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER: - force gp32 to zero. - * mips-opc.c (G6): New define. - (mips_builtin_op): Add "move" definition for -gp32. - -2000-02-22 Ian Lance Taylor <ian@zembu.com> - - From Grant Erickson <gerickso@Brocade.COM>: - * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2. - -2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au> - - * dis-buf.c (buffer_read_memory): Change `length' param and all int - vars to unsigned. - -2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk> - - * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions. - (print_insn_ppi): Likewise. - (print_insn_shx): Use info->mach to select appropriate insn set. - Add support for sh-dsp. Remove FD_REG_N support. - * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support. - (sh_arg_type): Likewise. Remove FD_REG_N. - (sh_dsp_reg_nums): New enum. - (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros. - (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise. - (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise. - (arch_sh3_dsp_up): Likewise. - (sh_opcode_info): New field: arch. - (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and - D_REG_N. Fill in arch field. Add sh-dsp insns. - -2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com> - - * arm-dis.c: Change flavor name from atpcs-special to - special-atpcs to prevent name conflict in gdb. - (get_arm_regname_num_options, set_arm_regname_option, - get_arm_regnames): New functions. API to access the several - flavor of register names. Note: Used by gdb. - (print_insn_thumb): Use the register name entry from the currently - selected flavor for LR and PC. - -2000-02-10 Nick Clifton <nickc@redhat.com> - - * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR - classes. - (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and - "mulsh.h" instructions. - * mcore-dis.c (imsk array): Add masks for MULSH and OPSR - classes. - (print_insn_mcore): Add support for little endian targets. - Add support for MULSH and OPSR classes. - -2000-02-07 Nick Clifton <nickc@redhat.com> - - * arm-dis.c (parse_arm_diassembler_option): Rename again. - Previous delat did not take. - -2000-02-03 Timothy Wall <twall@redhat.com> - - * dis-buf.c (buffer_read_memory): Use octets_per_byte field - to adjust target address bounds checking and calculate the - appropriate octet offset into data. - -2000-01-27 Nick Clifton <nickc@redhat.com> - - * arm-dis.c: (parse_disassembler_option): Rename to - parse_arm_disassembler_option and allow to be exported. - - * disassemble.c (disassembler_usage): New function: Print out any - target specific disassembler options. - Call arm_disassembler_options() if the ARM architecture is being - supported. - - * arm-dis.c (NUM_ELEM): Define this macro if not already - defined. - (arm_regname): New struct type for ARM register names. - (arm_toggle_regnames): Delete. - (parse_disassembler_option): Use register name structure. - (print_insn): New function: Combines duplicate code found in - print_insn_big_arm and print_insn_little_arm. - (print_insn_big_arm): Call print_insn. - (print_insn_little_arm): Call print_insn. - (print_arm_disassembler_options): Display list of supported, - ARM specific disassembler options. - -2000-01-27 Thomas de Lellis <tdel@windriver.com> - - * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the - ARM_STT_16BIT flag as Thumb code symbols. - - * arm-dis.c (printf_insn_little_arm): Ditto. - -2000-01-25 Thomas de Lellis <tdel@windriver.com> - - * arm-dis.c (printf_insn_thumb): Prevent double dumping - of raw thumb instructions. - -2000-01-20 Nick Clifton <nickc@redhat.com> - - * mcore-opc.h (mcore_table): Add "add" as an alias for "addu". - -2000-01-03 Nick Clifton <nickc@cygnus.com> - - * arm-dis.c (streq): New macro. - (strneq): New macro. - (force_thumb): ew local variable. - (parse_disassembler_option): New function: Parse a single, ARM - specific disassembler command line switch. - (parse_disassembler_option): Call parse_disassembler_option to - parse individual command line switches. - (print_insn_big_arm): Check force_thumb. - (print_insn_little_arm): Check force_thumb. - -For older changes see ChangeLog-9899 +For older changes see ChangeLog-0203 Local Variables: mode: change-log |