diff options
Diffstat (limited to 'libdecnumber/decNumber.c')
| -rw-r--r-- | libdecnumber/decNumber.c | 866 |
1 files changed, 423 insertions, 443 deletions
diff --git a/libdecnumber/decNumber.c b/libdecnumber/decNumber.c index ebc7cf0..f9a624a 100644 --- a/libdecnumber/decNumber.c +++ b/libdecnumber/decNumber.c @@ -31,35 +31,24 @@ /* ------------------------------------------------------------------ */ /* Decimal Number arithmetic module */ /* ------------------------------------------------------------------ */ -/* This module comprises the routines for arbitrary-precision General */ -/* Decimal Arithmetic as defined in the specification which may be */ -/* found on the General Decimal Arithmetic pages. It implements both */ +/* This module comprises the routines for General Decimal Arithmetic */ +/* as defined in the specification which may be found on the */ +/* http://www2.hursley.ibm.com/decimal web pages. It implements both */ /* the full ('extended') arithmetic and the simpler ('subset') */ /* arithmetic. */ /* */ -/* Usage notes: */ +/* Usage notes: */ /* */ /* 1. This code is ANSI C89 except: */ /* */ -/* a) C99 line comments (double forward slash) are used. (Most C */ -/* compilers accept these. If yours does not, a simple script */ -/* can be used to convert them to ANSI C comments.) */ -/* */ -/* b) Types from C99 stdint.h are used. If you do not have this */ -/* header file, see the User's Guide section of the decNumber */ -/* documentation; this lists the necessary definitions. */ -/* */ -/* c) If DECDPUN>4 or DECUSE64=1, the C99 64-bit int64_t and */ +/* If DECDPUN>4 or DECUSE64=1, the C99 64-bit int64_t and */ /* uint64_t types may be used. To avoid these, set DECUSE64=0 */ /* and DECDPUN<=4 (see documentation). */ /* */ -/* The code also conforms to C99 restrictions; in particular, */ -/* strict aliasing rules are observed. */ -/* */ /* 2. The decNumber format which this library uses is optimized for */ /* efficient processing of relatively short numbers; in particular */ /* it allows the use of fixed sized structures and minimizes copy */ -/* and move operations. It does, however, support arbitrary */ +/* and move operations. It does, however, support arbitrary */ /* precision (up to 999,999,999 digits) and arbitrary exponent */ /* range (Emax in the range 0 through 999,999,999 and Emin in the */ /* range -999,999,999 through 0). Mathematical functions (for */ @@ -78,7 +67,7 @@ /* permitted). Other than that case, operands must not overlap. */ /* */ /* 5. Error handling: the type of the error is ORed into the status */ -/* flags in the current context (decContext structure). The */ +/* flags in the current context (decContext structure). The */ /* SIGFPE signal is then raised if the corresponding trap-enabler */ /* flag in the decContext is set (is 1). */ /* */ @@ -87,7 +76,7 @@ /* */ /* The result of any routine which returns a number will always */ /* be a valid number (which may be a special value, such as an */ -/* Infinity or NaN). */ +/* Infinity or NaN). */ /* */ /* 6. The decNumber format is not an exchangeable concrete */ /* representation as it comprises fields which may be machine- */ @@ -95,10 +84,10 @@ /* Canonical conversions to and from strings are provided; other */ /* conversions are available in separate modules. */ /* */ -/* 7. Normally, input operands are assumed to be valid. Set DECCHECK */ +/* 7. Normally, input operands are assumed to be valid. Set DECCHECK */ /* to 1 for extended operand checking (including NULL operands). */ /* Results are undefined if a badly-formed structure (or a NULL */ -/* pointer to a structure) is provided, though with DECCHECK */ +/* pointer to a structure) is provided, though with DECCHECK */ /* enabled the operator routines are protected against exceptions. */ /* (Except if the result pointer is NULL, which is unrecoverable.) */ /* */ @@ -109,7 +98,7 @@ /* */ /* 8. Subset arithmetic is available only if DECSUBSET is set to 1. */ /* ------------------------------------------------------------------ */ -/* Implementation notes for maintenance of this module: */ +/* Implementation notes for maintenance of this module: */ /* */ /* 1. Storage leak protection: Routines which use malloc are not */ /* permitted to use return for fastpath or error exits (i.e., */ @@ -126,7 +115,7 @@ /* 3. Setting status in the context must always be the very last */ /* action in a routine, as non-0 status may raise a trap and hence */ /* the call to set status may not return (if the handler uses long */ -/* jump). Therefore all cleanup must be done first. In general, */ +/* jump). Therefore all cleanup must be done first. In general, */ /* to achieve this status is accumulated and is only applied just */ /* before return by calling decContextSetStatus (via decStatus). */ /* */ @@ -138,9 +127,9 @@ /* */ /* 4. Exponent checking is minimized by allowing the exponent to */ /* grow outside its limits during calculations, provided that */ -/* the decFinalize function is called later. Multiplication and */ +/* the decFinalize function is called later. Multiplication and */ /* division, and intermediate calculations in exponentiation, */ -/* require more careful checks because of the risk of 31-bit */ +/* require more careful checks because of the risk of 31-bit */ /* overflow (the most negative valid exponent is -1999999997, for */ /* a 999999999-digit number with adjusted exponent of -999999999). */ /* */ @@ -162,18 +151,18 @@ /* is not useful for longer numbers because overflow of 32 bits */ /* would lead to 4 multiplies, which is almost as expensive as */ /* a divide (unless a floating-point or 64-bit multiply is */ -/* assumed to be available). */ +/* assumed to be available). */ /* */ -/* 8. Unusual abbreviations that may be used in the commentary: */ +/* 8. Unusual abbreviations that may be used in the commentary: */ /* lhs -- left hand side (operand, of an operation) */ -/* lsd -- least significant digit (of coefficient) */ +/* lsd -- least significant digit (of coefficient) */ /* lsu -- least significant Unit (of coefficient) */ /* msd -- most significant digit (of coefficient) */ /* msi -- most significant item (in an array) */ /* msu -- most significant Unit (of coefficient) */ /* rhs -- right hand side (operand, of an operation) */ -/* +ve -- positive */ -/* -ve -- negative */ +/* +ve -- positive */ +/* -ve -- negative */ /* ** -- raise to the power */ /* ------------------------------------------------------------------ */ @@ -189,25 +178,25 @@ /* Public lookup table used by the D2U macro */ const uByte d2utable[DECMAXD2U+1]=D2UTABLE; -#define DECVERB 1 /* set to 1 for verbose DECCHECK */ +#define DECVERB 1 /* set to 1 for verbose DECCHECK */ #define powers DECPOWERS /* old internal name */ /* Local constants */ #define DIVIDE 0x80 /* Divide operators */ #define REMAINDER 0x40 /* .. */ #define DIVIDEINT 0x20 /* .. */ -#define REMNEAR 0x10 /* .. */ -#define COMPARE 0x01 /* Compare operators */ -#define COMPMAX 0x02 /* .. */ -#define COMPMIN 0x03 /* .. */ +#define REMNEAR 0x10 /* .. */ +#define COMPARE 0x01 /* Compare operators */ +#define COMPMAX 0x02 /* .. */ +#define COMPMIN 0x03 /* .. */ #define COMPTOTAL 0x04 /* .. */ -#define COMPNAN 0x05 /* .. [NaN processing] */ -#define COMPSIG 0x06 /* .. [signaling COMPARE] */ +#define COMPNAN 0x05 /* .. [NaN processing] */ +#define COMPSIG 0x06 /* .. [signaling COMPARE] */ #define COMPMAXMAG 0x07 /* .. */ #define COMPMINMAG 0x08 /* .. */ -#define DEC_sNaN 0x40000000 /* local status: sNaN signal */ -#define BADINT (Int)0x80000000 /* most-negative Int; error indicator */ +#define DEC_sNaN 0x40000000 /* local status: sNaN signal */ +#define BADINT (Int)0x80000000 /* most-negative Int; error indicator */ /* Next two indicate an integer >= 10**6, and its parity (bottom bit) */ #define BIGEVEN (Int)0x80000002 #define BIGODD (Int)0x80000003 @@ -273,7 +262,7 @@ static Int decShiftToLeast(Unit *, Int, Int); static Int decShiftToMost(Unit *, Int, Int); static void decStatus(decNumber *, uInt, decContext *); static void decToString(const decNumber *, char[], Flag); -static decNumber * decTrim(decNumber *, decContext *, Flag, Flag, Int *); +static decNumber * decTrim(decNumber *, decContext *, Flag, Int *); static Int decUnitAddSub(const Unit *, Int, const Unit *, Int, Int, Unit *, Int); static Int decUnitCompare(const Unit *, Int, const Unit *, Int, Int); @@ -313,7 +302,7 @@ uInt decAllocBytes=0; /* count of bytes allocated */ #if DECCHECK /* Optional checking routines. Enabling these means that decNumber */ /* and decContext operands to operator routines are checked for */ -/* correctness. This roughly doubles the execution time of the */ +/* correctness. This roughly doubles the execution time of the */ /* fastest routines (and adds 600+ bytes), so should not normally be */ /* used in 'production'. */ /* decCheckInexact is used to check that inexact results have a full */ @@ -393,7 +382,7 @@ Int decNumberToInt32(const decNumber *dn, decContext *set) { Int d; /* work */ const Unit *up; /* .. */ uInt hi=0, lo; /* .. */ - up=dn->lsu; /* -> lsu */ + up=dn->lsu; /* -> lsu */ lo=*up; /* get 1 to 9 digits */ #if DECDPUN>1 /* split to higher */ hi=lo/10; @@ -429,7 +418,7 @@ uInt decNumberToUInt32(const decNumber *dn, decContext *set) { Int d; /* work */ const Unit *up; /* .. */ uInt hi=0, lo; /* .. */ - up=dn->lsu; /* -> lsu */ + up=dn->lsu; /* -> lsu */ lo=*up; /* get 1 to 9 digits */ #if DECDPUN>1 /* split to higher */ hi=lo/10; @@ -448,7 +437,7 @@ uInt decNumberToUInt32(const decNumber *dn, decContext *set) { } /* decNumberToUInt32 */ /* ------------------------------------------------------------------ */ -/* to-scientific-string -- conversion to numeric string */ +/* to-scientific-string -- conversion to numeric string */ /* to-engineering-string -- conversion to numeric string */ /* */ /* decNumberToString(dn, string); */ @@ -475,30 +464,30 @@ char * decNumberToEngString(const decNumber *dn, char *string){ /* to-number -- conversion from numeric string */ /* */ /* decNumberFromString -- convert string to decNumber */ -/* dn -- the number structure to fill */ +/* dn -- the number structure to fill */ /* chars[] -- the string to convert ('\0' terminated) */ /* set -- the context used for processing any error, */ /* determining the maximum precision available */ /* (set.digits), determining the maximum and minimum */ /* exponent (set.emax and set.emin), determining if */ -/* extended values are allowed, and checking the */ +/* extended values are allowed, and checking the */ /* rounding mode if overflow occurs or rounding is */ /* needed. */ /* */ /* The length of the coefficient and the size of the exponent are */ /* checked by this routine, so the correct error (Underflow or */ -/* Overflow) can be reported or rounding applied, as necessary. */ +/* Overflow) can be reported or rounding applied, as necessary. */ /* */ /* If bad syntax is detected, the result will be a quiet NaN. */ /* ------------------------------------------------------------------ */ decNumber * decNumberFromString(decNumber *dn, const char chars[], decContext *set) { Int exponent=0; /* working exponent [assume 0] */ - uByte bits=0; /* working flags [assume +ve] */ + uByte bits=0; /* working flags [assume +ve] */ Unit *res; /* where result will be built */ Unit resbuff[SD2U(DECBUFFER+9)];/* local buffer in case need temporary */ /* [+9 allows for ln() constants] */ - Unit *allocres=NULL; /* -> allocated result, iff allocated */ + Unit *allocres=NULL; /* -> allocated result, iff allocated */ Int d=0; /* count of digits found in decimal part */ const char *dotchar=NULL; /* where dot was found */ const char *cfirst=chars; /* -> first character of decimal part */ @@ -518,7 +507,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], do { /* status & malloc protection */ for (c=chars;; c++) { /* -> input character */ - if (*c>='0' && *c<='9') { /* test for Arabic digit */ + if (*c>='0' && *c<='9') { /* test for Arabic digit */ last=c; d++; /* count of real digits */ continue; /* still in decimal part */ @@ -548,7 +537,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], if (!set->extended) break; /* hopeless */ #endif /* Infinities and NaNs are possible, here */ - if (dotchar!=NULL) break; /* .. unless had a dot */ + if (dotchar!=NULL) break; /* .. unless had a dot */ decNumberZero(dn); /* be optimistic */ if (decBiStr(c, "infinity", "INFINITY") || decBiStr(c, "inf", "INF")) { @@ -559,7 +548,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], /* a NaN expected */ /* 2003.09.10 NaNs are now permitted to have a sign */ dn->bits=bits | DECNAN; /* assume simple NaN */ - if (*c=='s' || *c=='S') { /* looks like an sNaN */ + if (*c=='s' || *c=='S') { /* looks like an sNaN */ c++; dn->bits=bits | DECSNAN; } @@ -589,7 +578,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], if (d>set->digits) break; } /* too many digits? */ /* good; drop through to convert the integer to coefficient */ - status=0; /* syntax is OK */ + status=0; /* syntax is OK */ bits=dn->bits; /* for copy-back */ } /* last==NULL */ @@ -624,14 +613,14 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], /* [up to 1999999999 is OK, for example 1E-1000000998] */ } if (nege) exponent=-exponent; /* was negative */ - status=0; /* is OK */ + status=0; /* is OK */ } /* stuff after digits */ /* Here when whole string has been inspected; syntax is good */ /* cfirst->first digit (never dot), last->last digit (ditto) */ /* strip leading zeros/dot [leave final 0 if all 0's] */ - if (*cfirst=='0') { /* [cfirst has stepped over .] */ + if (*cfirst=='0') { /* [cfirst has stepped over .] */ for (c=cfirst; c<last; c++, cfirst++) { if (*c=='.') continue; /* ignore dots */ if (*c!='0') break; /* non-zero found */ @@ -648,7 +637,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], /* Handle decimal point... */ if (dotchar!=NULL && dotchar<last) /* non-trailing '.' found? */ - exponent-=(last-dotchar); /* adjust exponent */ + exponent-=(last-dotchar); /* adjust exponent */ /* [we can now ignore the .] */ /* OK, the digits string is good. Assemble in the decNumber, or in */ @@ -714,7 +703,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], } } /* decNumberShow(dn); */ - } while(0); /* [for break] */ + } while(0); /* [for break] */ if (allocres!=NULL) free(allocres); /* drop any storage used */ if (status!=0) decStatus(dn, status, set); @@ -732,7 +721,7 @@ decNumber * decNumberFromString(decNumber *dn, const char chars[], /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ /* See also decNumberCopyAbs for a quiet bitwise version of this. */ /* C must have space for set->digits digits. */ @@ -750,7 +739,7 @@ decNumber * decNumberAbs(decNumber *res, const decNumber *rhs, #endif decNumberZero(&dzero); /* set 0 */ - dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ decAddOp(res, &dzero, rhs, set, (uByte)(rhs->bits & DECNEG), &status); if (status!=0) decStatus(res, status, set); #if DECCHECK @@ -767,7 +756,7 @@ decNumber * decNumberAbs(decNumber *res, const decNumber *rhs, /* res is C, the result. C may be A and/or B (e.g., X=X+X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -862,7 +851,7 @@ decNumber * decNumberAnd(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for one digit (or NaN). */ /* ------------------------------------------------------------------ */ @@ -882,7 +871,7 @@ decNumber * decNumberCompare(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for one digit (or NaN). */ /* ------------------------------------------------------------------ */ @@ -902,10 +891,10 @@ decNumber * decNumberCompareSignal(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for one digit; the result will always be one of */ -/* -1, 0, or 1. */ +/* -1, 0, or 1. */ /* ------------------------------------------------------------------ */ decNumber * decNumberCompareTotal(decNumber *res, const decNumber *lhs, const decNumber *rhs, decContext *set) { @@ -923,10 +912,10 @@ decNumber * decNumberCompareTotal(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for one digit; the result will always be one of */ -/* -1, 0, or 1. */ +/* -1, 0, or 1. */ /* ------------------------------------------------------------------ */ decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs, const decNumber *rhs, decContext *set) { @@ -955,7 +944,7 @@ decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs, a=allocbufa; /* use the allocated space */ } decNumberCopy(a, lhs); /* copy content */ - a->bits&=~DECNEG; /* .. and clear the sign */ + a->bits&=~DECNEG; /* .. and clear the sign */ lhs=a; /* use copy from here on */ } if (decNumberIsNegative(rhs)) { /* rhs<0 */ @@ -969,11 +958,11 @@ decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs, b=allocbufb; /* use the allocated space */ } decNumberCopy(b, rhs); /* copy content */ - b->bits&=~DECNEG; /* .. and clear the sign */ + b->bits&=~DECNEG; /* .. and clear the sign */ rhs=b; /* use copy from here on */ } decCompareOp(res, lhs, rhs, set, COMPTOTAL, &status); - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ if (allocbufb!=NULL) free(allocbufb); /* .. */ @@ -989,7 +978,7 @@ decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X/X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1005,14 +994,14 @@ decNumber * decNumberDivide(decNumber *res, const decNumber *lhs, } /* decNumberDivide */ /* ------------------------------------------------------------------ */ -/* decNumberDivideInteger -- divide and return integer quotient */ +/* decNumberDivideInteger -- divide and return integer quotient */ /* */ /* This computes C = A # B, where # is the integer divide operator */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X#X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1043,7 +1032,7 @@ decNumber * decNumberDivideInteger(decNumber *res, const decNumber *lhs, /* */ /* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* ------------------------------------------------------------------ */ /* This is a wrapper for decExpOp which can handle the slightly wider */ /* (double) range needed by Ln (which has to be able to calculate */ @@ -1076,7 +1065,7 @@ decNumber * decNumberExp(decNumber *res, const decNumber *rhs, } #endif decExpOp(res, rhs, set, &status); - } while(0); /* end protected */ + } while(0); /* end protected */ #if DECSUBSET if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ @@ -1098,7 +1087,7 @@ decNumber * decNumberExp(decNumber *res, const decNumber *rhs, /* lhs is A */ /* rhs is B */ /* fhs is C [far hand side] */ -/* set is the context */ +/* set is the context */ /* */ /* Mathematical function restrictions apply (see above); a NaN is */ /* returned with Invalid_operation if a restriction is violated. */ @@ -1157,7 +1146,7 @@ decNumber * decNumberFMA(decNumber *res, const decNumber *lhs, /* Note sNaN has to go through addOp to shorten payload if */ /* necessary */ if ((status&DEC_Invalid_operation)!=0) { - if (!(status&DEC_sNaN)) { /* but be true invalid */ + if (!(status&DEC_sNaN)) { /* but be true invalid */ decNumberZero(res); /* acc not yet set */ res->bits=DECNAN; break; @@ -1167,12 +1156,12 @@ decNumber * decNumberFMA(decNumber *res, const decNumber *lhs, } #if DECCHECK else { /* multiply was OK */ - if (status!=0) printf("Status=%08lx after FMA multiply\n", (LI)status); + if (status!=0) printf("Status=%08lx after FMA multiply\n", status); } #endif /* add the third operand and result -> res, and all is done */ decAddOp(res, acc, fhs, set, 0, &status); - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ if (status!=0) decStatus(res, status, set); @@ -1217,7 +1206,7 @@ decNumber * decNumberInvert(decNumber *res, const decNumber *rhs, msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */ for (; uc<=msuc; ua++, uc++) { /* Unit loop */ Unit a; /* extract unit */ - Int i, j; /* work */ + Int i, j; /* work */ if (ua>msua) a=0; else a=*ua; *uc=0; /* can now write back */ @@ -1263,7 +1252,7 @@ decNumber * decNumberInvert(decNumber *res, const decNumber *rhs, /* */ /* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* ------------------------------------------------------------------ */ /* This is a wrapper for decLnOp which can handle the slightly wider */ /* (+11) range needed by Ln, Log10, etc. (which may have to be able */ @@ -1298,7 +1287,7 @@ decNumber * decNumberLn(decNumber *res, const decNumber *rhs, } /* extended=0 */ #endif decLnOp(res, rhs, set, &status); - } while(0); /* end protected */ + } while(0); /* end protected */ #if DECSUBSET if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ @@ -1312,7 +1301,7 @@ decNumber * decNumberLn(decNumber *res, const decNumber *rhs, } /* decNumberLn */ /* ------------------------------------------------------------------ */ -/* decNumberLogB - get adjusted exponent, by 754 rules */ +/* decNumberLogB - get adjusted exponent, by 754r rules */ /* */ /* This computes C = adjustedexponent(A) */ /* */ @@ -1347,9 +1336,9 @@ decNumber * decNumberLogB(decNumber *res, const decNumber *rhs, if (decNumberIsNaN(rhs)) decNaNs(res, rhs, NULL, set, &status); else if (decNumberIsInfinite(rhs)) decNumberCopyAbs(res, rhs); else if (decNumberIsZero(rhs)) { - decNumberZero(res); /* prepare for Infinity */ + decNumberZero(res); /* prepare for Infinity */ res->bits=DECNEG|DECINF; /* -Infinity */ - status|=DEC_Division_by_zero; /* as per 754 */ + status|=DEC_Division_by_zero; /* as per 754r */ } else { /* finite non-zero */ Int ae=rhs->exponent+rhs->digits-1; /* adjusted exponent */ @@ -1363,7 +1352,7 @@ decNumber * decNumberLogB(decNumber *res, const decNumber *rhs, /* ------------------------------------------------------------------ */ /* decNumberLog10 -- logarithm in base 10 */ /* */ -/* This computes C = log10(A) */ +/* This computes C = log10(A) */ /* */ /* res is C, the result. C may be A */ /* rhs is A */ @@ -1382,13 +1371,13 @@ decNumber * decNumberLogB(decNumber *res, const decNumber *rhs, /* */ /* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* ------------------------------------------------------------------ */ /* This calculates ln(A)/ln(10) using appropriate precision. For */ /* ln(A) this is the max(p, rhs->digits + t) + 3, where p is the */ /* requested digits and t is the number of digits in the exponent */ -/* (maximum 6). For ln(10) it is p + 3; this is often handled by the */ -/* fastpath in decLnOp. The final division is done to the requested */ +/* (maximum 6). For ln(10) it is p + 3; this is often handled by the */ +/* fastpath in decLnOp. The final division is done to the requested */ /* precision. */ /* ------------------------------------------------------------------ */ decNumber * decNumberLog10(decNumber *res, const decNumber *rhs, @@ -1455,7 +1444,7 @@ decNumber * decNumberLog10(decNumber *res, const decNumber *rhs, decNumberFromInt32(w, w->exponent); residue=0; decCopyFit(res, w, set, &residue, &status); /* copy & round */ - decFinish(res, set, &residue, &status); /* cleanup/set flags */ + decFinish(res, set, &residue, &status); /* cleanup/set flags */ break; } /* not a power of 10 */ } /* not a candidate for exact */ @@ -1512,7 +1501,7 @@ decNumber * decNumberLog10(decNumber *res, const decNumber *rhs, aset.digits=set->digits; /* for final divide */ decDivideOp(res, a, b, &aset, DIVIDE, &status); /* into result */ - } while(0); /* [for break] */ + } while(0); /* [for break] */ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ if (allocbufb!=NULL) free(allocbufb); /* .. */ @@ -1530,12 +1519,12 @@ decNumber * decNumberLog10(decNumber *res, const decNumber *rhs, /* ------------------------------------------------------------------ */ /* decNumberMax -- compare two Numbers and return the maximum */ /* */ -/* This computes C = A ? B, returning the maximum by 754 rules */ +/* This computes C = A ? B, returning the maximum by 754R rules */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1553,12 +1542,12 @@ decNumber * decNumberMax(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberMaxMag -- compare and return the maximum by magnitude */ /* */ -/* This computes C = A ? B, returning the maximum by 754 rules */ +/* This computes C = A ? B, returning the maximum by 754R rules */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1576,12 +1565,12 @@ decNumber * decNumberMaxMag(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberMin -- compare two Numbers and return the minimum */ /* */ -/* This computes C = A ? B, returning the minimum by 754 rules */ +/* This computes C = A ? B, returning the minimum by 754R rules */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1599,12 +1588,12 @@ decNumber * decNumberMin(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberMinMag -- compare and return the minimum by magnitude */ /* */ -/* This computes C = A ? B, returning the minimum by 754 rules */ +/* This computes C = A ? B, returning the minimum by 754R rules */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1626,7 +1615,7 @@ decNumber * decNumberMinMag(decNumber *res, const decNumber *lhs, /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ /* See also decNumberCopyNegate for a quiet bitwise version of this. */ /* C must have space for set->digits digits. */ @@ -1643,7 +1632,7 @@ decNumber * decNumberMinus(decNumber *res, const decNumber *rhs, #endif decNumberZero(&dzero); /* make 0 */ - dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ decAddOp(res, &dzero, rhs, set, DECNEG, &status); if (status!=0) decStatus(res, status, set); #if DECCHECK @@ -1653,15 +1642,15 @@ decNumber * decNumberMinus(decNumber *res, const decNumber *rhs, } /* decNumberMinus */ /* ------------------------------------------------------------------ */ -/* decNumberNextMinus -- next towards -Infinity */ +/* decNumberNextMinus -- next towards -Infinity */ /* */ /* This computes C = A - infinitesimal, rounded towards -Infinity */ /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ -/* This is a generalization of 754 NextDown. */ +/* This is a generalization of 754r NextDown. */ /* ------------------------------------------------------------------ */ decNumber * decNumberNextMinus(decNumber *res, const decNumber *rhs, decContext *set) { @@ -1695,9 +1684,9 @@ decNumber * decNumberNextMinus(decNumber *res, const decNumber *rhs, /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ -/* This is a generalization of 754 NextUp. */ +/* This is a generalization of 754r NextUp. */ /* ------------------------------------------------------------------ */ decNumber * decNumberNextPlus(decNumber *res, const decNumber *rhs, decContext *set) { @@ -1729,15 +1718,14 @@ decNumber * decNumberNextPlus(decNumber *res, const decNumber *rhs, /* decNumberNextToward -- next towards rhs */ /* */ /* This computes C = A +/- infinitesimal, rounded towards */ -/* +/-Infinity in the direction of B, as per 754-1985 nextafter */ -/* modified during revision but dropped from 754-2008. */ +/* +/-Infinity in the direction of B, as per 754r nextafter rules */ /* */ /* res is C, the result. C may be A or B. */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ -/* This is a generalization of 754-1985 NextAfter. */ +/* This is a generalization of 754r NextAfter. */ /* ------------------------------------------------------------------ */ decNumber * decNumberNextToward(decNumber *res, const decNumber *lhs, const decNumber *rhs, decContext *set) { @@ -1759,27 +1747,27 @@ decNumber * decNumberNextToward(decNumber *res, const decNumber *lhs, if (result==0) decNumberCopySign(res, lhs, rhs); /* easy */ else { /* differ: need NextPlus or NextMinus */ uByte sub; /* add or subtract */ - if (result<0) { /* lhs<rhs, do nextplus */ + if (result<0) { /* lhs<rhs, do nextplus */ /* -Infinity is the special case */ if ((lhs->bits&(DECINF|DECNEG))==(DECINF|DECNEG)) { decSetMaxValue(res, set); res->bits=DECNEG; /* negative */ - return res; /* there is no status to set */ + return res; /* there is no status to set */ } workset.round=DEC_ROUND_CEILING; sub=0; /* add, please */ } /* plus */ - else { /* lhs>rhs, do nextminus */ + else { /* lhs>rhs, do nextminus */ /* +Infinity is the special case */ if ((lhs->bits&(DECINF|DECNEG))==DECINF) { decSetMaxValue(res, set); - return res; /* there is no status to set */ + return res; /* there is no status to set */ } workset.round=DEC_ROUND_FLOOR; sub=DECNEG; /* subtract, please */ } /* minus */ decNumberZero(&dtiny); /* start with 0 */ - dtiny.lsu[0]=1; /* make number that is .. */ + dtiny.lsu[0]=1; /* make number that is .. */ dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */ decAddOp(res, lhs, &dtiny, &workset, sub, &status); /* + or - */ /* turn off exceptions if the result is a normal number */ @@ -1868,7 +1856,7 @@ decNumber * decNumberOr(decNumber *res, const decNumber *lhs, /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ /* See also decNumberCopy for a quiet bitwise version of this. */ /* C must have space for set->digits digits. */ @@ -1886,7 +1874,7 @@ decNumber * decNumberPlus(decNumber *res, const decNumber *rhs, #endif decNumberZero(&dzero); /* make 0 */ - dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ decAddOp(res, &dzero, rhs, set, 0, &status); if (status!=0) decStatus(res, status, set); #if DECCHECK @@ -1903,7 +1891,7 @@ decNumber * decNumberPlus(decNumber *res, const decNumber *rhs, /* res is C, the result. C may be A and/or B (e.g., X=X+X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -1926,7 +1914,7 @@ decNumber * decNumberMultiply(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X**X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* */ @@ -1942,7 +1930,7 @@ decNumber * decNumberMultiply(decNumber *res, const decNumber *lhs, /* */ /* The final result is rounded according to the context; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* ------------------------------------------------------------------ */ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, const decNumber *rhs, decContext *set) { @@ -1965,7 +1953,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, Flag seenbit; /* seen a bit while powering */ Int residue=0; /* rounding residue */ uInt status=0; /* accumulators */ - uByte bits=0; /* result sign if errors */ + uByte bits=0; /* result sign if errors */ decContext aset; /* working context */ decNumber dnOne; /* work value 1... */ /* local accumulator buffer [a decNumber, with digits+elength+1 digits] */ @@ -2005,7 +1993,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, if (decNumberIsNegative(lhs) /* lhs<0 */ && !decNumberIsZero(lhs)) /* .. */ status|=DEC_Invalid_operation; - else { /* lhs >=0 */ + else { /* lhs >=0 */ decNumberZero(&dnOne); /* set up 1 */ dnOne.lsu[0]=1; decNumberCompare(dac, lhs, &dnOne, set); /* lhs ? 1 */ @@ -2032,14 +2020,14 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, /* Original rhs may be an integer that fits and is in range */ n=decGetInt(rhs); if (n!=BADINT) { /* it is an integer */ - rhsint=1; /* record the fact for 1**n */ + rhsint=1; /* record the fact for 1**n */ isoddint=(Flag)n&1; /* [works even if big] */ if (n!=BIGEVEN && n!=BIGODD) /* can use integer path? */ useint=1; /* looks good */ } if (decNumberIsNegative(lhs) /* -x .. */ - && isoddint) bits=DECNEG; /* .. to an odd power */ + && isoddint) bits=DECNEG; /* .. to an odd power */ /* handle LHS infinity */ if (decNumberIsInfinite(lhs)) { /* [NaNs already handled] */ @@ -2072,7 +2060,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, uByte rbits=rhs->bits; /* save */ if (rbits & DECNEG) { /* was a 0**(-n) */ #if DECSUBSET - if (!set->extended) { /* [bad if subset] */ + if (!set->extended) { /* [bad if subset] */ status|=DEC_Invalid_operation; break;} #endif @@ -2101,7 +2089,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, aset.clamp=0; /* and no concrete format */ /* calculate the result using exp(ln(lhs)*rhs), which can */ - /* all be done into the accumulator, dac. The precision needed */ + /* all be done into the accumulator, dac. The precision needed */ /* is enough to contain the full information in the lhs (which */ /* is the total digits, including exponent), or the requested */ /* precision, if larger, + 4; 6 is used for the exponent */ @@ -2158,7 +2146,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, if (!rhsint) { /* add padding */ Int shift=set->digits-1; dac->digits=decShiftToMost(dac->lsu, 1, shift); - dac->exponent=-shift; /* make 1.0000... */ + dac->exponent=-shift; /* make 1.0000... */ status|=DEC_Inexact|DEC_Rounded; /* deemed inexact */ } } @@ -2176,7 +2164,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, /* if a negative power the constant 1 is needed, and if not subset */ /* invert the lhs now rather than inverting the result later */ if (decNumberIsNegative(rhs)) { /* was a **-n [hence digits>0] */ - decNumber *inv=invbuff; /* asssume use fixed buffer */ + decNumber *inv=invbuff; /* asssume use fixed buffer */ decNumberCopy(&dnOne, dac); /* dnOne=1; [needed now or later] */ #if DECSUBSET if (set->extended) { /* need to calculate 1/lhs */ @@ -2209,13 +2197,13 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, } /* [the following two lines revealed an optimizer bug in a C++ */ /* compiler, with symptom: 5**3 -> 25, when n=n+n was used] */ - n=n<<1; /* move next bit to testable position */ + n=n<<1; /* move next bit to testable position */ if (n<0) { /* top bit is set */ seenbit=1; /* OK, significant bit seen */ decMultiplyOp(dac, dac, lhs, &aset, &status); /* dac=dac*x */ } if (i==31) break; /* that was the last bit */ - if (!seenbit) continue; /* no need to square 1 */ + if (!seenbit) continue; /* no need to square 1 */ decMultiplyOp(dac, dac, dac, &aset, &status); /* dac=dac*dac [square] */ } /*i*/ /* 32 bits */ @@ -2254,9 +2242,9 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, decCopyFit(res, dac, set, &residue, &status); decFinish(res, set, &residue, &status); /* final cleanup */ #if DECSUBSET - if (!set->extended) decTrim(res, set, 0, 1, &dropped); /* trailing zeros */ + if (!set->extended) decTrim(res, set, 0, &dropped); /* trailing zeros */ #endif - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocdac!=NULL) free(allocdac); /* drop any storage used */ if (allocinv!=NULL) free(allocinv); /* .. */ @@ -2282,7 +2270,7 @@ decNumber * decNumberPower(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A or B */ /* lhs is A, the number to adjust */ /* rhs is B, the number with exponent to match */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* */ @@ -2300,11 +2288,11 @@ decNumber * decNumberQuantize(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberReduce -- remove trailing zeros */ /* */ -/* This computes C = 0 + A, and normalizes the result */ +/* This computes C = 0 + A, and normalizes the result */ /* */ /* res is C, the result. C may be A */ /* rhs is A */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -2321,7 +2309,7 @@ decNumber * decNumberReduce(decNumber *res, const decNumber *rhs, #endif uInt status=0; /* as usual */ Int residue=0; /* as usual */ - Int dropped; /* work */ + Int dropped; /* work */ #if DECCHECK if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; @@ -2349,9 +2337,8 @@ decNumber * decNumberReduce(decNumber *res, const decNumber *rhs, /* reduce result to the requested length and copy to result */ decCopyFit(res, rhs, set, &residue, &status); /* copy & round */ decFinish(res, set, &residue, &status); /* cleanup/set flags */ - decTrim(res, set, 1, 0, &dropped); /* normalize in place */ - /* [may clamp] */ - } while(0); /* end protected */ + decTrim(res, set, 1, &dropped); /* normalize in place */ + } while(0); /* end protected */ #if DECSUBSET if (allocrhs !=NULL) free(allocrhs); /* .. */ @@ -2371,7 +2358,7 @@ decNumber * decNumberReduce(decNumber *res, const decNumber *rhs, /* res is C, the result. C may be A or B */ /* lhs is A, the number to adjust */ /* rhs is B, the requested exponent */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* */ @@ -2394,7 +2381,7 @@ decNumber * decNumberRescale(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X%X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -2417,7 +2404,7 @@ decNumber * decNumberRemainder(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X%X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -2438,15 +2425,15 @@ decNumber * decNumberRemainderNear(decNumber *res, const decNumber *lhs, /* This computes C = A rot B (in base ten and rotating set->digits */ /* digits). */ /* */ -/* res is C, the result. C may be A and/or B (e.g., X=XrotX) */ +/* res is C, the result. C may be A and/or B (e.g., X=XrotX) */ /* lhs is A */ /* rhs is B, the number of digits to rotate (-ve to right) */ -/* set is the context */ +/* set is the context */ /* */ /* The digits of the coefficient of A are rotated to the left (if B */ /* is positive) or to the right (if B is negative) without adjusting */ /* the exponent or the sign of A. If lhs->digits is less than */ -/* set->digits the coefficient is padded with zeros on the left */ +/* set->digits the coefficient is padded with zeros on the left */ /* before the rotate. Any leading zeros in the result are removed */ /* as usual. */ /* */ @@ -2486,10 +2473,10 @@ decNumber * decNumberRotate(decNumber *res, const decNumber *lhs, && !decNumberIsInfinite(res)) { /* lhs was infinite */ /* left-rotate to do; 0 < rotate < set->digits */ uInt units, shift; /* work */ - uInt msudigits; /* digits in result msu */ + uInt msudigits; /* digits in result msu */ Unit *msu=res->lsu+D2U(res->digits)-1; /* current msu */ Unit *msumax=res->lsu+D2U(set->digits)-1; /* rotation msu */ - for (msu++; msu<=msumax; msu++) *msu=0; /* ensure high units=0 */ + for (msu++; msu<=msumax; msu++) *msu=0; /* ensure high units=0 */ res->digits=set->digits; /* now full-length */ msudigits=MSUDIGITS(res->digits); /* actual digits in msu */ @@ -2557,7 +2544,7 @@ decNumber * decNumberRotate(decNumber *res, const decNumber *lhs, /* (reversing is easy and fast) */ decReverse(res->lsu+units, msumax); /* left part */ decReverse(res->lsu, res->lsu+units-1); /* right part */ - decReverse(res->lsu, msumax); /* whole */ + decReverse(res->lsu, msumax); /* whole */ } /* whole units to rotate */ /* the rotation may have left an undetermined number of zeros */ /* on the left, so true length needs to be calculated */ @@ -2572,7 +2559,7 @@ decNumber * decNumberRotate(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberSameQuantum -- test for equal exponents */ /* */ -/* res is the result number, which will contain either 0 or 1 */ +/* res is the result number, which will contain either 0 or 1 */ /* lhs is a number to test */ /* rhs is the second (usually a pattern) */ /* */ @@ -2599,15 +2586,15 @@ decNumber * decNumberSameQuantum(decNumber *res, const decNumber *lhs, } /* decNumberSameQuantum */ /* ------------------------------------------------------------------ */ -/* decNumberScaleB -- multiply by a power of 10 */ +/* decNumberScaleB -- multiply by a power of 10 */ /* */ -/* This computes C = A x 10**B where B is an integer (q=0) with */ +/* This computes C = A x 10**B where B is an integer (q=0) with */ /* maximum magnitude 2*(emax+digits) */ /* */ /* res is C, the result. C may be A or B */ /* lhs is A, the number to adjust */ /* rhs is B, the requested power of ten to use */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* */ @@ -2617,7 +2604,7 @@ decNumber * decNumberScaleB(decNumber *res, const decNumber *lhs, const decNumber *rhs, decContext *set) { Int reqexp; /* requested exponent change [B] */ uInt status=0; /* accumulator */ - Int residue; /* work */ + Int residue; /* work */ #if DECCHECK if (decCheckOperands(res, lhs, rhs, set)) return res; @@ -2657,7 +2644,7 @@ decNumber * decNumberScaleB(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X<<X) */ /* lhs is A */ /* rhs is B, the number of digits to shift (-ve to right) */ -/* set is the context */ +/* set is the context */ /* */ /* The digits of the coefficient of A are shifted to the left (if B */ /* is positive) or to the right (if B is negative) without adjusting */ @@ -2688,8 +2675,8 @@ decNumber * decNumberShift(decNumber *res, const decNumber *lhs, else { /* both numeric, rhs is an integer */ shift=decGetInt(rhs); /* [cannot fail] */ if (shift==BADINT /* something bad .. */ - || shift==BIGODD || shift==BIGEVEN /* .. very big .. */ - || abs(shift)>set->digits) /* .. or out of range */ + || shift==BIGODD || shift==BIGEVEN /* .. very big .. */ + || abs(shift)>set->digits) /* .. or out of range */ status=DEC_Invalid_operation; else { /* rhs is OK */ decNumberCopy(res, lhs); @@ -2757,27 +2744,27 @@ decNumber * decNumberShift(decNumber *res, const decNumber *lhs, /* if x < 0 then */ /* assert false */ /* else */ -/* result 0 */ +/* result 0 */ /* end if */ /* end if */ -/* var f := setexp(x, 0) % fraction part of x [0.1 <= x < 1] */ +/* var f := setexp(x, 0) % fraction part of x [0.1 <= x < 1] */ /* var e := getexp(x) % exponent part of x */ /* var approx : real */ -/* if e mod 2 = 0 then */ +/* if e mod 2 = 0 then */ /* approx := .259 + .819 * f % approx to root of f */ -/* else */ +/* else */ /* f := f/l0 % adjustments */ -/* e := e + 1 % for odd */ -/* approx := .0819 + 2.59 * f % exponent */ +/* e := e + 1 % for odd */ +/* approx := .0819 + 2.59 * f % exponent */ /* end if */ /* */ /* var p:= 3 */ /* const maxp := currentprecision + 2 */ -/* loop */ +/* loop */ /* p := min(2*p - 2, maxp) % p = 4,6,10, . . . , maxp */ /* precision p */ -/* approx := .5 * (approx + f/approx) */ -/* exit when p = maxp */ +/* approx := .5 * (approx + f/approx) */ +/* exit when p = maxp */ /* end loop */ /* */ /* % approx is now within 1 ulp of the properly rounded square root */ @@ -2807,11 +2794,11 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, Int workp; /* working precision */ Int residue=0; /* rounding residue */ uInt status=0, ignore=0; /* status accumulators */ - uInt rstatus; /* .. */ + uInt rstatus; /* .. */ Int exp; /* working exponent */ Int ideal; /* ideal (preferred) exponent */ Int needbytes; /* work */ - Int dropped; /* .. */ + Int dropped; /* .. */ #if DECSUBSET decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ @@ -2862,9 +2849,9 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, } /* calculate the ideal (preferred) exponent [floor(exp/2)] */ - /* [It would be nicer to write: ideal=rhs->exponent>>1, but this */ + /* [We would like to write: ideal=rhs->exponent>>1, but this */ /* generates a compiler warning. Generated code is the same.] */ - ideal=(rhs->exponent&~1)/2; /* target */ + ideal=(rhs->exponent&~1)/2; /* target */ /* handle zeros */ if (ISZERO(rhs)) { @@ -2889,7 +2876,6 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, /* b -- intermediate temporary result (same size as a) */ /* if any is too long for local storage, then allocate */ workp=MAXI(set->digits+1, rhs->digits); /* actual rounding precision */ - workp=MAXI(workp, 7); /* at least 7 for low cases */ maxp=workp+2; /* largest working precision */ needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit); @@ -2905,7 +2891,7 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, if (needbytes>(Int)sizeof(bufa)) { /* [same applies to b] */ allocbufa=(decNumber *)malloc(needbytes); allocbufb=(decNumber *)malloc(needbytes); - if (allocbufa==NULL || allocbufb==NULL) { /* hopeless */ + if (allocbufa==NULL || allocbufb==NULL) { /* hopeless */ status|=DEC_Insufficient_storage; break;} a=allocbufa; /* use the allocated spaces */ @@ -2919,8 +2905,6 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, /* set up working context */ decContextDefault(&workset, DEC_INIT_DECIMAL64); - workset.emax=DEC_MAX_EMAX; - workset.emin=DEC_MIN_EMIN; /* [Until further notice, no error is possible and status bits */ /* (Rounded, etc.) should be ignored, not accumulated.] */ @@ -2929,7 +2913,7 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, workset.digits=workp; /* p for initial calculation */ t->bits=0; t->digits=3; a->bits=0; a->digits=3; - if ((exp & 1)==0) { /* even exponent */ + if ((exp & 1)==0) { /* even exponent */ /* Set t=0.259, a=0.819 */ t->exponent=-3; a->exponent=-3; @@ -2961,7 +2945,6 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, a->lsu[0]=9; a->lsu[1]=5; a->lsu[2]=2; #endif } - decMultiplyOp(a, a, f, &workset, &ignore); /* a=a*f */ decAddOp(a, a, t, &workset, 0, &ignore); /* ..+t */ /* [a is now the initial approximation for sqrt(f), calculated with */ @@ -2973,14 +2956,16 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, t->lsu[0]=5; /* .. */ t->exponent=-1; /* .. */ workset.digits=3; /* initial p */ - for (; workset.digits<maxp;) { + for (;;) { /* set p to min(2*p - 2, maxp) [hence 3; or: 4, 6, 10, ... , maxp] */ - workset.digits=MINI(workset.digits*2-2, maxp); + workset.digits=workset.digits*2-2; + if (workset.digits>maxp) workset.digits=maxp; /* a = 0.5 * (a + f/a) */ /* [calculated at p then rounded to currentprecision] */ decDivideOp(b, f, a, &workset, DIVIDE, &ignore); /* b=f/a */ - decAddOp(b, b, a, &workset, 0, &ignore); /* b=b+a */ - decMultiplyOp(a, b, t, &workset, &ignore); /* a=b*0.5 */ + decAddOp(b, b, a, &workset, 0, &ignore); /* b=b+a */ + decMultiplyOp(a, b, t, &workset, &ignore); /* a=b*0.5 */ + if (a->digits==maxp) break; /* have required digits */ } /* loop */ /* Here, 0.1 <= a < 1 [Hull], and a has maxp digits */ @@ -2989,7 +2974,8 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, /* correctly */ approxset=*set; /* get emin, emax, etc. */ approxset.round=DEC_ROUND_HALF_EVEN; - a->exponent+=exp/2; /* set correct exponent */ + a->exponent+=exp/2; /* set correct exponent */ + rstatus=0; /* clear status */ residue=0; /* .. and accumulator */ decCopyFit(a, a, &approxset, &residue, &rstatus); /* reduce (if needed) */ @@ -3007,7 +2993,7 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, status|=(rstatus & ~(DEC_Rounded|DEC_Inexact)); /* Carry out the Hull correction */ - a->exponent-=exp/2; /* back to 0.1->1 */ + a->exponent-=exp/2; /* back to 0.1->1 */ /* a is now at final precision and within 1 ulp of the properly */ /* rounded square root of f; to ensure proper rounding, compare */ @@ -3049,18 +3035,18 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, /* estimation are irrelevant, so status was not accumulated] */ /* Here, 0.1 <= a < 1 (still), so adjust back */ - a->exponent+=exp/2; /* set correct exponent */ + a->exponent+=exp/2; /* set correct exponent */ /* count droppable zeros [after any subnormal rounding] by */ /* trimming a copy */ decNumberCopy(b, a); - decTrim(b, set, 1, 1, &dropped); /* [drops trailing zeros] */ + decTrim(b, set, 1, &dropped); /* [drops trailing zeros] */ - /* Set Inexact and Rounded. The answer can only be exact if */ - /* it is short enough so that squaring it could fit in workp */ - /* digits, so this is the only (relatively rare) condition that */ - /* a careful check is needed */ - if (b->digits*2-1 > workp) { /* cannot fit */ + /* Set Inexact and Rounded. The answer can only be exact if */ + /* it is short enough so that squaring it could fit in workp digits, */ + /* and it cannot have trailing zeros due to clamping, so these are */ + /* the only (relatively rare) conditions a careful check is needed */ + if (b->digits*2-1 > workp && !set->clamp) { /* cannot fit */ status|=DEC_Inexact|DEC_Rounded; } else { /* could be exact/unrounded */ @@ -3072,19 +3058,12 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, else { /* plausible */ decCompareOp(t, b, rhs, &workset, COMPARE, &mstatus); /* b ? rhs */ if (!ISZERO(t)) status|=DEC_Inexact|DEC_Rounded; /* not equal */ - else { /* is Exact */ + else { /* is Exact */ /* here, dropped is the count of trailing zeros in 'a' */ /* use closest exponent to ideal... */ - Int todrop=ideal-a->exponent; /* most that can be dropped */ + Int todrop=ideal-a->exponent; /* most that can be dropped */ if (todrop<0) status|=DEC_Rounded; /* ideally would add 0s */ else { /* unrounded */ - /* there are some to drop, but emax may not allow all */ - Int maxexp=set->emax-set->digits+1; - Int maxdrop=maxexp-a->exponent; - if (todrop>maxdrop && set->clamp) { /* apply clamping */ - todrop=maxdrop; - status|=DEC_Clamped; - } if (dropped<todrop) { /* clamp to those available */ todrop=dropped; status|=DEC_Clamped; @@ -3114,11 +3093,11 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, } decNumberCopy(res, a); /* a is now the result */ - } while(0); /* end protected */ + } while(0); /* end protected */ - if (allocbuff!=NULL) free(allocbuff); /* drop any storage used */ - if (allocbufa!=NULL) free(allocbufa); /* .. */ - if (allocbufb!=NULL) free(allocbufb); /* .. */ + if (allocbuff!=NULL) free(allocbuff); /* drop any storage used */ + if (allocbufa!=NULL) free(allocbufa); /* .. */ + if (allocbufb!=NULL) free(allocbufb); /* .. */ #if DECSUBSET if (allocrhs !=NULL) free(allocrhs); /* .. */ #endif @@ -3137,7 +3116,7 @@ decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, /* res is C, the result. C may be A and/or B (e.g., X=X-X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* */ /* C must have space for set->digits digits. */ /* ------------------------------------------------------------------ */ @@ -3159,7 +3138,7 @@ decNumber * decNumberSubtract(decNumber *res, const decNumber *lhs, /* */ /* res is the result */ /* rhs is input number */ -/* set is the context */ +/* set is the context */ /* */ /* res must have space for any value of rhs. */ /* */ @@ -3194,9 +3173,9 @@ decNumber * decNumberToIntegralExact(decNumber *res, const decNumber *rhs, if (rhs->exponent>=0) return decNumberCopy(res, rhs); /* that was easy, but if negative exponent there is work to do... */ workset=*set; /* clone rounding, etc. */ - workset.digits=rhs->digits; /* no length rounding */ + workset.digits=rhs->digits; /* no length rounding */ workset.traps=0; /* no traps */ - decNumberZero(&dn); /* make a number with exponent 0 */ + decNumberZero(&dn); /* make a number with exponent 0 */ decNumberQuantize(res, rhs, &dn, &workset); status|=workset.status; } @@ -3290,9 +3269,9 @@ decNumber * decNumberXor(decNumber *res, const decNumber *lhs, /* ================================================================== */ /* ------------------------------------------------------------------ */ -/* decNumberClass -- return the decClass of a decNumber */ +/* decNumberClass -- return the decClass of a decNumber */ /* dn -- the decNumber to test */ -/* set -- the context to use for Emin */ +/* set -- the context to use for Emin */ /* returns the decClass enum */ /* ------------------------------------------------------------------ */ enum decClass decNumberClass(const decNumber *dn, decContext *set) { @@ -3368,7 +3347,7 @@ decNumber * decNumberCopy(decNumber *dest, const decNumber *src) { const Unit *smsup, *s; /* work */ Unit *d; /* .. */ /* memcpy for the remaining Units would be safe as they cannot */ - /* overlap. However, this explicit loop is faster in short cases. */ + /* overlap. However, this explicit loop is faster in short cases. */ d=dest->lsu+1; /* -> first destination */ smsup=src->lsu+D2U(src->digits); /* -> source msu+1 */ for (s=src->lsu+1; s<smsup; s++, d++) *d=*s; @@ -3421,7 +3400,7 @@ decNumber * decNumberCopyNegate(decNumber *res, const decNumber *rhs) { /* ------------------------------------------------------------------ */ /* decNumberCopySign -- quiet copy and set sign operator */ /* */ -/* This sets C = A with the sign of B */ +/* This sets C = A with the sign of B */ /* */ /* res is C, the result. C may be A */ /* lhs is A */ @@ -3445,7 +3424,7 @@ decNumber * decNumberCopySign(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decNumberGetBCD -- get the coefficient in BCD8 */ -/* dn is the source decNumber */ +/* dn is the source decNumber */ /* bcd is the uInt array that will receive dn->digits BCD bytes, */ /* most-significant at offset 0 */ /* returns bcd */ @@ -3453,14 +3432,14 @@ decNumber * decNumberCopySign(decNumber *res, const decNumber *lhs, /* bcd must have at least dn->digits bytes. No error is possible; if */ /* dn is a NaN or Infinite, digits must be 1 and the coefficient 0. */ /* ------------------------------------------------------------------ */ -uByte * decNumberGetBCD(const decNumber *dn, uByte *bcd) { +uByte * decNumberGetBCD(const decNumber *dn, uint8_t *bcd) { uByte *ub=bcd+dn->digits-1; /* -> lsd */ const Unit *up=dn->lsu; /* Unit pointer, -> lsu */ #if DECDPUN==1 /* trivial simple copy */ for (; ub>=bcd; ub--, up++) *ub=*up; - #else /* chopping needed */ - uInt u=*up; /* work */ + #else /* chopping needed */ + uInt u=*up; /* work */ uInt cut=DECDPUN; /* downcounter through unit */ for (; ub>=bcd; ub--) { *ub=(uByte)(u%10); /* [*6554 trick inhibits, here] */ @@ -3477,11 +3456,11 @@ uByte * decNumberGetBCD(const decNumber *dn, uByte *bcd) { /* ------------------------------------------------------------------ */ /* decNumberSetBCD -- set (replace) the coefficient from BCD8 */ -/* dn is the target decNumber */ +/* dn is the target decNumber */ /* bcd is the uInt array that will source n BCD bytes, most- */ /* significant at offset 0 */ /* n is the number of digits in the source BCD array (bcd) */ -/* returns dn */ +/* returns dn */ /* */ /* dn must have space for at least n digits. No error is possible; */ /* if dn is a NaN, or Infinite, or is to become a zero, n must be 1 */ @@ -3493,7 +3472,7 @@ decNumber * decNumberSetBCD(decNumber *dn, const uByte *bcd, uInt n) { #if DECDPUN==1 /* trivial simple copy */ for (; ub<bcd+n; ub++, up--) *up=*ub; - #else /* some assembly needed */ + #else /* some assembly needed */ /* calculate how many digits in msu, and hence first cut */ Int cut=MSUDIGITS(n); /* [faster than remainder] */ for (;up>=dn->lsu; up--) { /* each Unit from msu */ @@ -3502,14 +3481,14 @@ decNumber * decNumberSetBCD(decNumber *dn, const uByte *bcd, uInt n) { cut=DECDPUN; /* next Unit has all digits */ } #endif - dn->digits=n; /* set digit count */ + dn->digits=n; /* set digit count */ return dn; } /* decNumberSetBCD */ /* ------------------------------------------------------------------ */ /* decNumberIsNormal -- test normality of a decNumber */ /* dn is the decNumber to test */ -/* set is the context to use for Emin */ +/* set is the context to use for Emin */ /* returns 1 if |dn| is finite and >=Nmin, 0 otherwise */ /* ------------------------------------------------------------------ */ Int decNumberIsNormal(const decNumber *dn, decContext *set) { @@ -3521,7 +3500,7 @@ Int decNumberIsNormal(const decNumber *dn, decContext *set) { if (decNumberIsSpecial(dn)) return 0; /* not finite */ if (decNumberIsZero(dn)) return 0; /* not non-zero */ - ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ if (ae<set->emin) return 0; /* is subnormal */ return 1; } /* decNumberIsNormal */ @@ -3529,7 +3508,7 @@ Int decNumberIsNormal(const decNumber *dn, decContext *set) { /* ------------------------------------------------------------------ */ /* decNumberIsSubnormal -- test subnormality of a decNumber */ /* dn is the decNumber to test */ -/* set is the context to use for Emin */ +/* set is the context to use for Emin */ /* returns 1 if |dn| is finite, non-zero, and <Nmin, 0 otherwise */ /* ------------------------------------------------------------------ */ Int decNumberIsSubnormal(const decNumber *dn, decContext *set) { @@ -3541,7 +3520,7 @@ Int decNumberIsSubnormal(const decNumber *dn, decContext *set) { if (decNumberIsSpecial(dn)) return 0; /* not finite */ if (decNumberIsZero(dn)) return 0; /* not non-zero */ - ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ if (ae<set->emin) return 1; /* is subnormal */ return 0; } /* decNumberIsSubnormal */ @@ -3550,20 +3529,19 @@ Int decNumberIsSubnormal(const decNumber *dn, decContext *set) { /* decNumberTrim -- remove insignificant zeros */ /* */ /* dn is the number to trim */ -/* returns dn */ +/* returns dn */ /* */ /* All fields are updated as required. This is a utility operation, */ -/* so special values are unchanged and no error is possible. The */ -/* zeros are removed unconditionally. */ +/* so special values are unchanged and no error is possible. */ /* ------------------------------------------------------------------ */ decNumber * decNumberTrim(decNumber *dn) { - Int dropped; /* work */ + Int dropped; /* work */ decContext set; /* .. */ #if DECCHECK if (decCheckOperands(DECUNRESU, DECUNUSED, dn, DECUNCONT)) return dn; #endif decContextDefault(&set, DEC_INIT_BASE); /* clamp=0 */ - return decTrim(dn, &set, 0, 1, &dropped); + return decTrim(dn, &set, 0, &dropped); } /* decNumberTrim */ /* ------------------------------------------------------------------ */ @@ -3579,7 +3557,7 @@ const char * decNumberVersion(void) { /* decNumberZero -- set a number to 0 */ /* */ /* dn is the number to set, with space for one digit */ -/* returns dn */ +/* returns dn */ /* */ /* No error is possible. */ /* ------------------------------------------------------------------ */ @@ -3604,7 +3582,7 @@ decNumber * decNumberZero(decNumber *dn) { /* ------------------------------------------------------------------ */ /* decToString -- lay out a number into a string */ /* */ -/* dn is the number to lay out */ +/* dn is the number to lay out */ /* string is where to lay out the number */ /* eng is 1 if Engineering, 0 if Scientific */ /* */ @@ -3618,7 +3596,7 @@ decNumber * decNumberZero(decNumber *dn) { /* If DECCHECK is enabled the string "?" is returned if a number is */ /* invalid. */ static void decToString(const decNumber *dn, char *string, Flag eng) { - Int exp=dn->exponent; /* local copy */ + Int exp=dn->exponent; /* local copy */ Int e; /* E-part value */ Int pre; /* digits before the '.' */ Int cut; /* for counting digits in a Unit */ @@ -3638,7 +3616,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { } if (dn->bits&DECSPECIAL) { /* Is a special value */ if (decNumberIsInfinite(dn)) { - strcpy(c, "Inf"); + strcpy(c, "Inf"); strcpy(c+3, "inity"); return;} /* a NaN */ @@ -3658,7 +3636,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { cut=MSUDIGITS(dn->digits); /* [faster than remainder] */ cut--; /* power of ten for digit */ - if (exp==0) { /* simple integer [common fastpath] */ + if (exp==0) { /* simple integer [common fastpath] */ for (;up>=dn->lsu; up--) { /* each Unit from msu */ u=*up; /* contains DECDPUN digits to lay out */ for (; cut>=0; c++, cut--) TODIGIT(u, cut, c, pow); @@ -3671,7 +3649,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { pre=dn->digits+exp; /* digits before '.' */ e=0; /* no E */ if ((exp>0) || (pre<-5)) { /* need exponential form */ - e=exp+dn->digits-1; /* calculate E value */ + e=exp+dn->digits-1; /* calculate E value */ pre=1; /* assume one digit before '.' */ if (eng && (e!=0)) { /* engineering: may need to adjust */ Int adj; /* adjustment */ @@ -3704,14 +3682,14 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { Int n=pre; for (; pre>0; pre--, c++, cut--) { if (cut<0) { /* need new Unit */ - if (up==dn->lsu) break; /* out of input digits (pre>digits) */ + if (up==dn->lsu) break; /* out of input digits (pre>digits) */ up--; cut=DECDPUN-1; u=*up; } TODIGIT(u, cut, c, pow); } - if (n<dn->digits) { /* more to come, after '.' */ + if (n<dn->digits) { /* more to come, after '.' */ *c='.'; c++; for (;; c++, cut--) { if (cut<0) { /* need new Unit */ @@ -3731,7 +3709,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { for (; pre<0; pre++, c++) *c='0'; /* add any 0's after '.' */ for (; ; c++, cut--) { if (cut<0) { /* need new Unit */ - if (up==dn->lsu) break; /* out of input digits */ + if (up==dn->lsu) break; /* out of input digits */ up--; cut=DECDPUN-1; u=*up; @@ -3740,11 +3718,11 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { } } - /* Finally add the E-part, if needed. It will never be 0, has a + /* Finally add the E-part, if needed. It will never be 0, has a base maximum and minimum of +999999999 through -999999999, but could range down to -1999999998 for anormal numbers */ if (e!=0) { - Flag had=0; /* 1=had non-zero */ + Flag had=0; /* 1=had non-zero */ *c='E'; c++; *c='+'; c++; /* assume positive */ u=e; /* .. */ @@ -3772,7 +3750,7 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { /* res is C, the result. C may be A and/or B (e.g., X=X+X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* negate is DECNEG if rhs should be negated, or 0 otherwise */ /* status accumulates status for the caller */ /* */ @@ -3780,9 +3758,9 @@ static void decToString(const decNumber *dn, char *string, Flag eng) { /* Inexact in status must be 0 for correct Exact zero sign in result */ /* ------------------------------------------------------------------ */ /* If possible, the coefficient is calculated directly into C. */ -/* However, if: */ +/* However, if: */ /* -- a digits+1 calculation is needed because the numbers are */ -/* unaligned and span more than set->digits digits */ +/* unaligned and span more than set->digits digits */ /* -- a carry to digits+1 digits looks possible */ /* -- C is the same as A or B, and the result would destructively */ /* overlap the A or B coefficient */ @@ -3816,7 +3794,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, Unit accbuff[SD2U(DECBUFFER*2+20)]; /* local buffer [*2+20 reduces many */ /* allocations when called from */ /* other operations, notable exp] */ - Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ + Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ Int reqdigits=set->digits; /* local copy; requested DIGITS */ Int padding; /* work */ @@ -3861,7 +3839,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, else bits=(rhs->bits^negate) & DECNEG;/* RHS must be Infinity */ bits|=DECINF; decNumberZero(res); - res->bits=bits; /* set +/- infinity */ + res->bits=bits; /* set +/- infinity */ } /* an infinity */ break; } @@ -3879,7 +3857,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, #endif /* exponent will be the lower of the two */ adjust=lexp-res->exponent; /* adjustment needed [if -ve] */ - if (ISZERO(res)) { /* both 0: special IEEE 754 rules */ + if (ISZERO(res)) { /* both 0: special IEEE 854 rules */ if (adjust<0) res->exponent=lexp; /* set exponent */ /* 0-0 gives +0 unless rounding to -infinity, and -0-0 gives -0 */ if (diffsign) { @@ -3915,7 +3893,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* exponent will be the lower of the two */ /* [0-0 case handled above] */ adjust=rexp-res->exponent; /* adjustment needed [if -ve] */ - if (adjust<0) { /* 0-padding needed */ + if (adjust<0) { /* 0-padding needed */ if ((res->digits-adjust)>set->digits) { adjust=res->digits-set->digits; /* to fit exactly */ *status|=DEC_Rounded; /* [but exact] */ @@ -3976,7 +3954,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* other) padding with up to DIGITS-1 trailing zeros may be */ /* needed; then apply rounding (as exotic rounding modes may be */ /* affected by the residue). */ - rhsshift=0; /* rhs shift to left (padding) in Units */ + rhsshift=0; /* rhs shift to left (padding) in Units */ bits=lhs->bits; /* assume sign is that of LHS */ mult=1; /* likely multiplier */ @@ -4002,13 +3980,13 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* for residue use the relative sign indication... */ Int shift=reqdigits-rhs->digits; /* left shift needed */ residue=1; /* residue for rounding */ - if (diffsign) residue=-residue; /* signs differ */ + if (diffsign) residue=-residue; /* signs differ */ /* copy, shortening if necessary */ decCopyFit(res, rhs, set, &residue, status); /* if it was already shorter, then need to pad with zeros */ if (shift>0) { res->digits=decShiftToMost(res->lsu, res->digits, shift); - res->exponent-=shift; /* adjust the exponent. */ + res->exponent-=shift; /* adjust the exponent. */ } /* flip the result sign if unswapped and rhs was negated */ if (!swapped) res->bits^=negate; @@ -4133,7 +4111,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, if (set->round==DEC_ROUND_FLOOR) res->bits|=DECNEG; /* sign - */ else res->bits&=~DECNEG; /* sign + */ } - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocacc!=NULL) free(allocacc); /* drop any storage used */ #if DECSUBSET @@ -4154,8 +4132,8 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* res is C, the result. C may be A and/or B (e.g., X=X/X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ -/* op is DIVIDE, DIVIDEINT, REMAINDER, or REMNEAR respectively. */ +/* set is the context */ +/* op is DIVIDE, DIVIDEINT, REMAINDER, or REMNEAR respectively. */ /* status is the usual accumulator */ /* */ /* C must have space for set->digits digits. */ @@ -4170,7 +4148,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* */ /* Prepare operands and handle special values */ /* Test for x/0 and then 0/x */ -/* Exp =Exp1 - Exp2 */ +/* Exp =Exp1 - Exp2 */ /* Exp =Exp +len(var1) -len(var2) */ /* Sign=Sign1 * Sign2 */ /* Pad accumulator (Var1) to double-length with 0's (pad1) */ @@ -4182,7 +4160,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* this_unit=0 */ /* Do forever */ /* compare numbers */ -/* if <0 then leave inner_loop */ +/* if <0 then leave inner_loop */ /* if =0 then (* quick exit without subtract *) do */ /* this_unit=this_unit+1; output this_unit */ /* leave outer_loop; end */ @@ -4190,7 +4168,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* If same then tops2=msu2pair -- {units 1&2 of var2} */ /* else tops2=msu2plus -- {0, unit 1 of var2} */ /* tops1=first_unit_of_Var1*10**DECDPUN +second_unit_of_var1 */ -/* mult=tops1/tops2 -- Good and safe guess at divisor */ +/* mult=tops1/tops2 -- Good and safe guess at divisor */ /* if mult=0 then mult=1 */ /* this_unit=this_unit+mult */ /* subtract */ @@ -4202,7 +4180,7 @@ static decNumber * decAddOp(decNumber *res, const decNumber *lhs, /* exp=exp-1 */ /* end outer_loop */ /* exp=exp+1 -- set the proper exponent */ -/* if have=0 then generate answer=0 */ +/* if have=0 then generate answer=0 */ /* Return (Result is defined by Var1) */ /* */ /* ------------------------------------------------------------------ */ @@ -4222,15 +4200,15 @@ static decNumber * decDivideOp(decNumber *res, #endif Unit accbuff[SD2U(DECBUFFER+DECDPUN+10)]; /* local buffer */ Unit *acc=accbuff; /* -> accumulator array for result */ - Unit *allocacc=NULL; /* -> allocated buffer, iff allocated */ + Unit *allocacc=NULL; /* -> allocated buffer, iff allocated */ Unit *accnext; /* -> where next digit will go */ Int acclength; /* length of acc needed [Units] */ Int accunits; /* count of units accumulated */ Int accdigits; /* count of digits accumulated */ - Unit varbuff[SD2U(DECBUFFER*2+DECDPUN)]; /* buffer for var1 */ + Unit varbuff[SD2U(DECBUFFER*2+DECDPUN)*sizeof(Unit)]; /* buffer for var1 */ Unit *var1=varbuff; /* -> var1 array for long subtraction */ - Unit *varalloc=NULL; /* -> allocated buffer, iff used */ + Unit *varalloc=NULL; /* -> allocated buffer, iff used */ Unit *msu1; /* -> msu of var1 */ const Unit *var2; /* -> var2 array */ @@ -4305,7 +4283,7 @@ static decNumber * decDivideOp(decNumber *res, /* result is [finished clone of] lhs */ decCopyFit(res, lhs, set, &residue, status); } - else { /* a division */ + else { /* a division */ decNumberZero(res); res->bits=bits; /* set +/- zero */ /* for DIVIDEINT the exponent is always 0. For DIVIDE, result */ @@ -4354,7 +4332,7 @@ static decNumber * decDivideOp(decNumber *res, decNumberZero(res); /* integer 0 */ res->bits=bits; /* sign as computed */ } - else { /* a remainder */ + else { /* a remainder */ exponent=rhs->exponent; /* [save in case overwrite] */ decNumberCopy(res, lhs); /* [zeros always fit] */ if (exponent<res->exponent) res->exponent=exponent; /* use lower */ @@ -4447,8 +4425,8 @@ static decNumber * decDivideOp(decNumber *res, for (; target>=var1; target--) *target=0; /* rhs (var2) is left-aligned with var1 at the start */ - var2ulen=var1units; /* rhs logical length (units) */ - var2units=D2U(rhs->digits); /* rhs actual length (units) */ + var2ulen=var1units; /* rhs logical length (units) */ + var2units=D2U(rhs->digits); /* rhs actual length (units) */ var2=rhs->lsu; /* -> rhs array */ msu2=var2+var2units-1; /* -> msu of var2 [never changes] */ /* now set up the variables which will be used for estimating the */ @@ -4472,7 +4450,7 @@ static decNumber * decDivideOp(decNumber *res, for (pow=&powers[1]; *msu2>=*pow; pow++) exponent++; /* Now, if doing an integer divide or remainder, ensure that */ - /* the result will be Unit-aligned. To do this, shift the var1 */ + /* the result will be Unit-aligned. To do this, shift the var1 */ /* accumulator towards least if need be. (It's much easier to */ /* do this now than to reassemble the residue afterwards, if */ /* doing a remainder.) Also ensure the exponent is not negative. */ @@ -4485,7 +4463,7 @@ static decNumber * decDivideOp(decNumber *res, else cut=DECDPUN-exponent%DECDPUN; decShiftToLeast(var1, var1units, cut); exponent+=cut; /* maintain numerical value */ - var1initpad-=cut; /* .. and reduce padding */ + var1initpad-=cut; /* .. and reduce padding */ /* clean any most-significant units which were just emptied */ for (u=msu1; cut>=DECDPUN; cut-=DECDPUN, u--) *u=0; } /* align */ @@ -4500,7 +4478,7 @@ static decNumber * decDivideOp(decNumber *res, } /* ---- start the long-division loops ------------------------------ */ - accunits=0; /* no units accumulated yet */ + accunits=0; /* no units accumulated yet */ accdigits=0; /* .. or digits */ accnext=acc+acclength-1; /* -> msu of acc [NB: allows digits+1] */ for (;;) { /* outer forever loop */ @@ -4530,7 +4508,7 @@ static decNumber * decDivideOp(decNumber *res, /* reach here if var1 and var2 are identical; subtraction */ /* would increase digit by one, and the residue will be 0 so */ /* the calculation is done; leave the loop with residue=0. */ - thisunit++; /* as though subtracted */ + thisunit++; /* as though subtracted */ *var1=0; /* set var1 to 0 */ var1units=1; /* .. */ break; /* from inner */ @@ -4547,7 +4525,7 @@ static decNumber * decDivideOp(decNumber *res, } if (mult==0) mult=1; /* must always be at least 1 */ /* subtraction needed; var1 is > var2 */ - thisunit=(Unit)(thisunit+mult); /* accumulate */ + thisunit=(Unit)(thisunit+mult); /* accumulate */ /* subtract var1-var2, into var1; only the overlap needs */ /* processing, as this is an in-place calculation */ shift=var2ulen-var2units; @@ -4568,7 +4546,7 @@ static decNumber * decDivideOp(decNumber *res, /* The next unit has been calculated in full; unless it's a */ /* leading zero, add to acc */ - if (accunits!=0 || thisunit!=0) { /* is first or non-zero */ + if (accunits!=0 || thisunit!=0) { /* is first or non-zero */ *accnext=thisunit; /* store in accumulator */ /* account exactly for the new digits */ if (accunits==0) { @@ -4578,7 +4556,7 @@ static decNumber * decDivideOp(decNumber *res, else accdigits+=DECDPUN; accunits++; /* update count */ accnext--; /* ready for next */ - if (accdigits>reqdigits) break; /* have enough digits */ + if (accdigits>reqdigits) break; /* have enough digits */ } /* if the residue is zero, the operation is done (unless divide */ @@ -4631,7 +4609,7 @@ static decNumber * decDivideOp(decNumber *res, if ((lsu-QUOT10(lsu, drop+1) *powers[drop+1])!=0) break; /* found non-0 digit */ #else - if (lsu%powers[drop+1]!=0) break; /* found non-0 digit */ + if (lsu%powers[drop+1]!=0) break; /* found non-0 digit */ #endif exponent++; } @@ -4659,11 +4637,11 @@ static decNumber * decDivideOp(decNumber *res, Unit *quotlsu; /* for save */ Int quotdigits; /* .. */ - bits=lhs->bits; /* remainder sign is always as lhs */ + bits=lhs->bits; /* remainder sign is always as lhs */ /* Fastpath when residue is truly 0 is worthwhile [and */ /* simplifies the code below] */ - if (*var1==0 && var1units==1) { /* residue is 0 */ + if (*var1==0 && var1units==1) { /* residue is 0 */ Int exp=lhs->exponent; /* save min(exponents) */ if (rhs->exponent<exp) exp=rhs->exponent; decNumberZero(res); /* 0 coefficient */ @@ -4694,7 +4672,7 @@ static decNumber * decDivideOp(decNumber *res, accdigits=decGetDigits(var1, var1units); accunits=D2U(accdigits); - exponent=lhs->exponent; /* exponent is smaller of lhs & rhs */ + exponent=lhs->exponent; /* exponent is smaller of lhs & rhs */ if (rhs->exponent<exponent) exponent=rhs->exponent; /* Now correct the result if doing remainderNear; if it */ @@ -4742,7 +4720,7 @@ static decNumber * decDivideOp(decNumber *res, if (quotdigits>DECDPUN) { if (*up!=DECDPUNMAX) break;/* non-nines */ } - else { /* this is the last Unit */ + else { /* this is the last Unit */ if (*up==powers[quotdigits]-1) allnines=1; break; } @@ -4753,9 +4731,9 @@ static decNumber * decDivideOp(decNumber *res, *status|=DEC_Division_impossible; break;} - /* rem-rhs is needed; the sign will invert. Again, var1 */ + /* rem-rhs is needed; the sign will invert. Again, var1 */ /* can safely be used for the working Units array. */ - exp=rhs->exponent-exponent; /* RHS padding needed */ + exp=rhs->exponent-exponent; /* RHS padding needed */ /* Calculate units and remainder from exponent. */ expunits=exp/DECDPUN; exprem=exp%DECDPUN; @@ -4783,9 +4761,9 @@ static decNumber * decDivideOp(decNumber *res, #if DECSUBSET /* If a divide then strip trailing zeros if subset [after round] */ - if (!set->extended && (op==DIVIDE)) decTrim(res, set, 0, 1, &dropped); + if (!set->extended && (op==DIVIDE)) decTrim(res, set, 0, &dropped); #endif - } while(0); /* end protected */ + } while(0); /* end protected */ if (varalloc!=NULL) free(varalloc); /* drop any storage used */ if (allocacc!=NULL) free(allocacc); /* .. */ @@ -4804,7 +4782,7 @@ static decNumber * decDivideOp(decNumber *res, /* res is C, the result. C may be A and/or B (e.g., X=X*X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ +/* set is the context */ /* status is the usual accumulator */ /* */ /* C must have space for set->digits digits. */ @@ -4822,13 +4800,13 @@ static decNumber * decDivideOp(decNumber *res, /* The fastpath version lumps units together into 8-digit or 9-digit */ /* chunks, and also uses a lazy carry strategy to minimise expensive */ /* 64-bit divisions. The chunks are then broken apart again into */ -/* units for continuing processing. Despite this overhead, the */ +/* units for continuing processing. Despite this overhead, the */ /* fastpath can speed up some 16-digit operations by 10x (and much */ /* more for higher-precision calculations). */ /* */ /* A buffer always has to be used for the accumulator; in the */ /* fastpath, buffers are also always needed for the chunked copies of */ -/* of the operand coefficients. */ +/* of the operand coefficients. */ /* Static buffers are larger than needed just for multiply, to allow */ /* for calls from other operations (notably exp). */ /* ------------------------------------------------------------------ */ @@ -4839,10 +4817,10 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, Int accunits; /* Units of accumulator in use */ Int exponent; /* work */ Int residue=0; /* rounding residue */ - uByte bits; /* result sign */ + uByte bits; /* result sign */ Unit *acc; /* -> accumulator Unit array */ Int needbytes; /* size calculator */ - void *allocacc=NULL; /* -> allocated accumulator, iff allocated */ + void *allocacc=NULL; /* -> allocated accumulator, iff allocated */ Unit accbuff[SD2U(DECBUFFER*4+1)]; /* buffer (+1 for DECBUFFER==0, */ /* *4 for calls from other operations) */ const Unit *mer, *mermsup; /* work */ @@ -4874,19 +4852,19 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* [allocacc is shared for both paths, as only one will run] */ uLong *zacc=zaccbuff; /* -> accumulator array for exact result */ #if DECDPUN==1 - Int zoff; /* accumulator offset */ + Int zoff; /* accumulator offset */ #endif uInt *lip, *rip; /* item pointers */ - uInt *lmsi, *rmsi; /* most significant items */ - Int ilhs, irhs, iacc; /* item counts in the arrays */ - Int lazy; /* lazy carry counter */ + uInt *lmsi, *rmsi; /* most significant items */ + Int ilhs, irhs, iacc; /* item counts in the arrays */ + Int lazy; /* lazy carry counter */ uLong lcarry; /* uLong carry */ uInt carry; /* carry (NB not uLong) */ - Int count; /* work */ + Int count; /* work */ const Unit *cup; /* .. */ Unit *up; /* .. */ uLong *lp; /* .. */ - Int p; /* .. */ + Int p; /* .. */ #endif #if DECSUBSET @@ -4943,10 +4921,10 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, #endif /* [following code does not require input rounding] */ - #if FASTMUL /* fastpath can be used */ + #if FASTMUL /* fastpath can be used */ /* use the fast path if there are enough digits in the shorter */ /* operand to make the setup and takedown worthwhile */ - #define NEEDTWO (DECDPUN*2) /* within two decUnitAddSub calls */ + #define NEEDTWO (DECDPUN*2) /* within two decUnitAddSub calls */ if (rhs->digits>NEEDTWO) { /* use fastpath... */ /* calculate the number of elements in each array */ ilhs=(lhs->digits+FASTDIGS-1)/FASTDIGS; /* [ceiling] */ @@ -4966,7 +4944,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* Allocating the accumulator space needs a special case when */ /* DECDPUN=1 because when converting the accumulator to Units */ /* after the multiplication each 8-byte item becomes 9 1-byte */ - /* units. Therefore iacc extra bytes are needed at the front */ + /* units. Therefore iacc extra bytes are needed at the front */ /* (rounded up to a multiple of 8 bytes), and the uLong */ /* accumulator starts offset the appropriate number of units */ /* to the right to avoid overwrite during the unchunking. */ @@ -4982,7 +4960,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, *status|=DEC_Insufficient_storage; break;} - acc=(Unit *)zacc; /* -> target Unit array */ + acc=(Unit *)zacc; /* -> target Unit array */ #if DECDPUN==1 zacc+=zoff; /* start uLong accumulator to right */ #endif @@ -5044,12 +5022,12 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, carry=(uInt)(lcarry-((uLong)FASTBASE*carry2)); /* [inline] */ } *(lp+1)+=carry; /* add to item above [inline] */ - *lp-=((uLong)FASTBASE*carry); /* [inline] */ + *lp-=((uLong)FASTBASE*carry); /* [inline] */ } /* carry resolution */ } /* rip loop */ /* The multiplication is complete; time to convert back into */ - /* units. This can be done in-place in the accumulator and in */ + /* units. This can be done in-place in the accumulator and in */ /* 32-bit operations, because carries were resolved after the */ /* final add. This needs N-1 divides and multiplies for */ /* each item in the accumulator (which will become up to N */ @@ -5118,7 +5096,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* There can be a 31-bit wrap in calculating the exponent. */ /* This can only happen if both input exponents are negative and */ - /* both their magnitudes are large. If there was a wrap, set a */ + /* both their magnitudes are large. If there was a wrap, set a */ /* safe very negative exponent, from which decFinalize() will */ /* raise a hard underflow shortly. */ exponent=lhs->exponent+rhs->exponent; /* calculate exponent */ @@ -5130,7 +5108,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* Set the coefficient. If any rounding, residue records */ decSetCoeff(res, set, acc, res->digits, &residue, status); decFinish(res, set, &residue, status); /* final cleanup */ - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocacc!=NULL) free(allocacc); /* drop any storage used */ #if DECSUBSET @@ -5159,13 +5137,13 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* Restrictions: */ /* */ /* digits, emax, and -emin in the context must be less than */ -/* 2*DEC_MAX_MATH (1999998), and the rhs must be within these */ +/* 2*DEC_MAX_MATH (1999998), and the rhs must be within these */ /* bounds or a zero. This is an internal routine, so these */ /* restrictions are contractual and not enforced. */ /* */ /* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* */ /* Finite results will always be full precision and Inexact, except */ /* when A is a zero or -Infinity (giving 1 or 0 respectively). */ @@ -5184,11 +5162,11 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* The error analysis in Hull & Abrham's paper applies except for the */ /* round-off error accumulation during the series evaluation. This */ /* code does not precalculate the number of iterations and so cannot */ -/* use Horner's scheme. Instead, the accumulation is done at double- */ +/* use Horner's scheme. Instead, the accumulation is done at double- */ /* precision, which ensures that the additions of the terms are exact */ /* and do not accumulate round-off (and any round-off errors in the */ /* terms themselves move 'to the right' faster than they can */ -/* accumulate). This code also extends the calculation by allowing, */ +/* accumulate). This code also extends the calculation by allowing, */ /* in the spirit of other decNumber operators, the input to be more */ /* precise than the result (the precision used is based on the more */ /* precise of the input or requested result). */ @@ -5211,7 +5189,7 @@ static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, /* more for smaller values. */ /* */ /* The leverage that can be applied in this way is severely */ -/* limited by the cost of the raise-to-the power at the end, */ +/* limited by the cost of the raise-to-the power at the end, */ /* which dominates when the number of iterations is small (less */ /* than ten) or when rhs is short. As an example, the adjustment */ /* x**10,000,000 needs 31 multiplications, all but one full-width. */ @@ -5296,7 +5274,7 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, *d->lsu=4; /* set 4 .. */ d->exponent=-set->digits; /* * 10**(-d) */ if (decNumberIsNegative(rhs)) d->exponent--; /* negative case */ - comp=decCompare(d, rhs, 1); /* signless compare */ + comp=decCompare(d, rhs, 1); /* signless compare */ if (comp==BADINT) { *status|=DEC_Insufficient_storage; break;} @@ -5349,18 +5327,18 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* front" effect. */ Int lever=MINI(8-h, maxlever); /* leverage attainable */ Int use=-rhs->digits-lever; /* exponent to use for RHS */ - h+=lever; /* apply leverage selected */ + h+=lever; /* apply leverage selected */ if (h<0) { /* clamp */ - use+=h; /* [may end up subnormal] */ + use+=h; /* [may end up subnormal] */ h=0; } /* Take a copy of RHS if it needs normalization (true whenever x>=1) */ if (rhs->exponent!=use) { - decNumber *newrhs=bufr; /* assume will fit on stack */ + decNumber *newrhs=bufr; /* assume will fit on stack */ needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit); if (needbytes>sizeof(bufr)) { /* need malloc space */ allocrhs=(decNumber *)malloc(needbytes); - if (allocrhs==NULL) { /* hopeless -- abandon */ + if (allocrhs==NULL) { /* hopeless -- abandon */ *status|=DEC_Insufficient_storage; break;} newrhs=allocrhs; /* use the allocated space */ @@ -5376,7 +5354,7 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* third term by setting the term variable t=x, the accumulator */ /* a=1, and the divisor d=2. */ - /* First determine the working precision. From Hull & Abrham */ + /* First determine the working precision. From Hull & Abrham */ /* this is set->digits+h+2. However, if x is 'over-precise' we */ /* need to allow for all its digits to potentially participate */ /* (consider an x where all the excess digits are 9s) so in */ @@ -5433,7 +5411,7 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* only the status from the accumulation is interesting */ /* [but it should remain unchanged after first add] */ decAddOp(a, a, t, &aset, 0, status); /* a=a+t */ - decMultiplyOp(t, t, x, &tset, &ignore); /* t=t*x */ + decMultiplyOp(t, t, x, &tset, &ignore); /* t=t*x */ decDivideOp(t, t, d, &tset, DIVIDE, &ignore); /* t=t/d */ /* the iteration ends when the term cannot affect the result, */ /* if rounded to p digits, which is when its value is smaller */ @@ -5448,7 +5426,7 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* just a sanity check; comment out test to show always */ if (iterations>p+3) printf("Exp iterations=%ld, status=%08lx, p=%ld, d=%ld\n", - (LI)iterations, (LI)*status, (LI)p, (LI)x->digits); + iterations, *status, p, x->digits); #endif } /* h<=8 */ @@ -5467,13 +5445,13 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* abandon if have had overflow or terminal underflow */ if (*status & (DEC_Overflow|DEC_Underflow)) { /* interesting? */ if (*status&DEC_Overflow || ISZERO(t)) break;} - n=n<<1; /* move next bit to testable position */ + n=n<<1; /* move next bit to testable position */ if (n<0) { /* top bit is set */ seenbit=1; /* OK, have a significant bit */ decMultiplyOp(t, t, a, &aset, status); /* acc=acc*x */ } if (i==31) break; /* that was the last bit */ - if (!seenbit) continue; /* no need to square 1 */ + if (!seenbit) continue; /* no need to square 1 */ decMultiplyOp(t, t, t, &aset, status); /* acc=acc*acc [square] */ } /*i*/ /* 32 bits */ /* decNumberShow(t); */ @@ -5486,7 +5464,7 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, aset.digits=set->digits; /* [use default rounding] */ decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */ decFinish(res, set, &residue, status); /* cleanup/set flags */ - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ if (allocbufa!=NULL) free(allocbufa); /* .. */ @@ -5511,16 +5489,16 @@ decNumber * decExpOp(decNumber *res, const decNumber *rhs, /* where x is truncated (NB) into the range 10 through 99, */ /* and then c = k>>2 and e = k&3. */ /* ------------------------------------------------------------------ */ -const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208, - 6972, 6748, 6540, 6340, 6148, 5968, 5792, 5628, 5464, 5312, - 5164, 5020, 4884, 4748, 4620, 4496, 4376, 4256, 4144, 4032, +const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208, + 6972, 6748, 6540, 6340, 6148, 5968, 5792, 5628, 5464, 5312, + 5164, 5020, 4884, 4748, 4620, 4496, 4376, 4256, 4144, 4032, 39233, 38181, 37157, 36157, 35181, 34229, 33297, 32389, 31501, 30629, 29777, 28945, 28129, 27329, 26545, 25777, 25021, 24281, 23553, 22837, 22137, 21445, 20769, 20101, 19445, 18801, 18165, 17541, 16925, 16321, 15721, 15133, 14553, 13985, 13421, 12865, 12317, 11777, 11241, 10717, - 10197, 9685, 9177, 8677, 8185, 7697, 7213, 6737, 6269, 5801, - 5341, 4889, 4437, 39930, 35534, 31186, 26886, 22630, 18418, 14254, - 10130, 6046, 20055}; + 10197, 9685, 9177, 8677, 8185, 7697, 7213, 6737, 6269, 5801, + 5341, 4889, 4437, 39930, 35534, 31186, 26886, 22630, 18418, 14254, + 10130, 6046, 20055}; /* ------------------------------------------------------------------ */ /* decLnOp -- effect natural logarithm */ @@ -5548,7 +5526,7 @@ const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208, /* */ /* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */ /* almost always be correctly rounded, but may be up to 1 ulp in */ -/* error in rare cases. */ +/* error in rare cases. */ /* ------------------------------------------------------------------ */ /* The result is calculated using Newton's method, with each */ /* iteration calculating a' = a + x * exp(-a) - 1. See, for example, */ @@ -5560,7 +5538,7 @@ const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208, /* */ /* Implementation notes: */ /* */ -/* 1. This is separated out as decLnOp so it can be called from */ +/* 1. This is separated out as decLnOp so it can be called from */ /* other Mathematical functions (e.g., Log 10) with a wider range */ /* than normal. In particular, it can handle the slightly wider */ /* (+9+2) range needed by a power function. */ @@ -5653,7 +5631,7 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, break;} } /* integer and short */ - /* Determine the working precision. This is normally the */ + /* Determine the working precision. This is normally the */ /* requested precision + 2, with a minimum of 9. However, if */ /* the rhs is 'over-precise' then allow for all its digits to */ /* potentially participate (consider an rhs where all the excess */ @@ -5706,7 +5684,7 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, decCopyFit(b, rhs, &aset, &residue, &ignore); /* copy & shorten */ b->exponent=0; /* make integer */ t=decGetInt(b); /* [cannot fail] */ - if (t<10) t=X10(t); /* adjust single-digit b */ + if (t<10) t=X10(t); /* adjust single-digit b */ t=LNnn[t-10]; /* look up ln(b) */ decNumberFromInt32(b, t>>2); /* b=ln(b) coefficient */ b->exponent=-(t&3)-3; /* set exponent */ @@ -5735,13 +5713,13 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, /* [initially 9 as then the sequence starts 7+2, 16+2, and */ /* 34+2, which is ideal for standard-sized numbers] */ aset.digits=pp; /* working context */ - bset.digits=pp+rhs->digits; /* wider context */ + bset.digits=pp+rhs->digits; /* wider context */ for (;;) { /* iterate */ #if DECCHECK iterations++; - if (iterations>24) break; /* consider 9 * 2**24 */ + if (iterations>24) break; /* consider 9 * 2**24 */ #endif - /* calculate the adjustment (exp(-a)*x-1) into b. This is a */ + /* calculate the adjustment (exp(-a)*x-1) into b. This is a */ /* catastrophic subtraction but it really is the difference */ /* from 1 that is of interest. */ /* Use the internal entry point to Exp as it allows the double */ @@ -5750,7 +5728,7 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, decExpOp(b, a, &bset, &ignore); /* b=exp(-a) */ a->bits^=DECNEG; /* restore sign of a */ /* now multiply by rhs and subtract 1, at the wider precision */ - decMultiplyOp(b, b, rhs, &bset, &ignore); /* b=b*rhs */ + decMultiplyOp(b, b, rhs, &bset, &ignore); /* b=b*rhs */ decAddOp(b, b, &numone, &bset, DECNEG, &ignore); /* b=b-1 */ /* the iteration ends when the adjustment cannot affect the */ @@ -5788,7 +5766,7 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, /* just a sanity check; remove the test to show always */ if (iterations>24) printf("Ln iterations=%ld, status=%08lx, p=%ld, d=%ld\n", - (LI)iterations, (LI)*status, (LI)p, (LI)rhs->digits); + iterations, *status, p, rhs->digits); #endif /* Copy and round the result to res */ @@ -5797,7 +5775,7 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, aset.digits=set->digits; /* [use default rounding] */ decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */ decFinish(res, set, &residue, status); /* cleanup/set flags */ - } while(0); /* end protected */ + } while(0); /* end protected */ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ if (allocbufb!=NULL) free(allocbufb); /* .. */ @@ -5810,14 +5788,14 @@ decNumber * decLnOp(decNumber *res, const decNumber *rhs, /* */ /* This computes C = op(A, B), where op adjusts the coefficient */ /* of C (by rounding or shifting) such that the exponent (-scale) */ -/* of C has the value B or matches the exponent of B. */ +/* of C has the value B or matches the exponent of B. */ /* The numerical value of C will equal A, except for the effects of */ /* any rounding that occurred. */ /* */ /* res is C, the result. C may be A or B */ /* lhs is A, the number to adjust */ /* rhs is B, the requested exponent */ -/* set is the context */ +/* set is the context */ /* quant is 1 for quantize or 0 for rescale */ /* status is the status accumulator (this can be called without */ /* risk of control loss) */ @@ -5836,7 +5814,7 @@ static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs, #endif const decNumber *inrhs=rhs; /* save original rhs */ Int reqdigits=set->digits; /* requested DIGITS */ - Int reqexp; /* requested exponent [-scale] */ + Int reqexp; /* requested exponent [-scale] */ Int residue=0; /* rounding residue */ Int etiny=set->emin-(reqdigits-1); @@ -5926,7 +5904,7 @@ static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs, if (res->exponent>reqexp) { /* re-check needed, e.g., for quantize(0.9999, 0.001) under */ /* set->digits==3 */ - if (res->digits==reqdigits) { /* cannot shift by 1 */ + if (res->digits==reqdigits) { /* cannot shift by 1 */ *status&=~(DEC_Inexact | DEC_Rounded); /* [clean these] */ *status|=DEC_Invalid_operation; break; @@ -5959,9 +5937,9 @@ static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs, } else { decFinalize(res, set, &residue, status); /* set subnormal flags */ - *status&=~DEC_Underflow; /* suppress Underflow [as per 754] */ + *status&=~DEC_Underflow; /* suppress Underflow [754r] */ } - } while(0); /* end protected */ + } while(0); /* end protected */ #if DECSUBSET if (allocrhs!=NULL) free(allocrhs); /* drop any storage used */ @@ -5978,26 +5956,26 @@ static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs, /* result of a comparison unless one or both */ /* operands is a NaN (in which case a NaN results) */ /* COMPSIG -- as COMPARE except that a quiet NaN raises */ -/* Invalid operation. */ +/* Invalid operation. */ /* COMPMAX -- returns the larger of the operands, using the */ -/* 754 maxnum operation */ +/* 754r maxnum operation */ /* COMPMAXMAG -- ditto, comparing absolute values */ -/* COMPMIN -- the 754 minnum operation */ +/* COMPMIN -- the 754r minnum operation */ /* COMPMINMAG -- ditto, comparing absolute values */ -/* COMTOTAL -- returns the signum (as a number) giving the */ -/* result of a comparison using 754 total ordering */ +/* COMTOTAL -- returns the signum (as a number) giving the */ +/* result of a comparison using 754r total ordering */ /* */ /* res is C, the result. C may be A and/or B (e.g., X=X?X) */ /* lhs is A */ /* rhs is B */ -/* set is the context */ -/* op is the operation flag */ +/* set is the context */ +/* op is the operation flag */ /* status is the usual accumulator */ /* */ /* C must have space for one digit for COMPARE or set->digits for */ -/* COMPMAX, COMPMIN, COMPMAXMAG, or COMPMINMAG. */ +/* COMPMAX, COMPMIN, COMPMAXMAG, or COMPMINMAG. */ /* ------------------------------------------------------------------ */ -/* The emphasis here is on speed for common cases, and avoiding */ +/* The emphasis here is on speed for common cases, and avoiding */ /* coefficient comparison if possible. */ /* ------------------------------------------------------------------ */ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, @@ -6008,7 +5986,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, decNumber *allocrhs=NULL; /* .., rhs */ #endif Int result=0; /* default result value */ - uByte merged; /* work */ + uByte merged; /* work */ #if DECCHECK if (decCheckOperands(res, lhs, rhs, set)) return res; @@ -6048,7 +6026,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, /* This assumes sNaN (even just one) leads to NaN. */ merged=(lhs->bits | rhs->bits) & (DECSNAN | DECNAN); if (merged) { /* a NaN bit set */ - if (op==COMPARE); /* result will be NaN */ + if (op==COMPARE); /* result will be NaN */ else if (op==COMPSIG) /* treat qNaN as sNaN */ *status|=DEC_Invalid_operation | DEC_sNaN; else if (op==COMPTOTAL) { /* total ordering, always finite */ @@ -6071,7 +6049,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, else if (merged & DECSNAN); /* sNaN -> qNaN */ else { /* here if MIN or MAX and one or two quiet NaNs */ - /* min or max -- 754 rules ignore single NaN */ + /* min or max -- 754r rules ignore single NaN */ if (!decNumberIsNaN(lhs) || !decNumberIsNaN(rhs)) { /* just one NaN; force choice to be the non-NaN operand */ op=COMPMAX; @@ -6087,7 +6065,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, /* have numbers */ if (op==COMPMAXMAG || op==COMPMINMAG) result=decCompare(lhs, rhs, 1); else result=decCompare(lhs, rhs, 0); /* sign matters */ - } while(0); /* end protected */ + } while(0); /* end protected */ if (result==BADINT) *status|=DEC_Insufficient_storage; /* rare */ else { @@ -6113,7 +6091,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, /* choose the operand for the result */ const decNumber *choice; if (result==0) { /* operands are numerically equal */ - /* choose according to sign then exponent (see 754) */ + /* choose according to sign then exponent (see 754r) */ uByte slhs=(lhs->bits & DECNEG); uByte srhs=(rhs->bits & DECNEG); #if DECSUBSET @@ -6132,7 +6110,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, else result=-1; /* [if equal, use lhs, technically identical] */ } - else { /* both positive */ + else { /* both positive */ if (lhs->exponent>rhs->exponent) result=+1; else result=-1; /* [ditto] */ @@ -6167,7 +6145,7 @@ decNumber * decCompareOp(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ static Int decCompare(const decNumber *lhs, const decNumber *rhs, Flag abs) { - Int result; /* result value */ + Int result; /* result value */ Int sigr; /* rhs signum */ Int compare; /* work */ @@ -6208,7 +6186,7 @@ static Int decCompare(const decNumber *lhs, const decNumber *rhs, compare=decUnitCompare(lhs->lsu, D2U(lhs->digits), rhs->lsu, D2U(rhs->digits), rhs->exponent-lhs->exponent); - if (compare!=BADINT) compare*=result; /* comparison succeeded */ + if (compare!=BADINT) compare*=result; /* comparison succeeded */ return compare; } /* decCompare */ @@ -6217,7 +6195,7 @@ static Int decCompare(const decNumber *lhs, const decNumber *rhs, /* */ /* This routine compares A ? B*10**E where A and B are unit arrays */ /* A is a plain integer */ -/* B has an exponent of E (which must be non-negative) */ +/* B has an exponent of E (which must be non-negative) */ /* */ /* Arg1 is A first Unit (lsu) */ /* Arg2 is A length in Units */ @@ -6227,18 +6205,18 @@ static Int decCompare(const decNumber *lhs, const decNumber *rhs, /* */ /* returns -1, 0, or 1 for A<B, A==B, or A>B, or BADINT if failure */ /* (the only possible failure is an allocation error, which can */ -/* only occur if E!=0) */ +/* only occur if E!=0) */ /* ------------------------------------------------------------------ */ static Int decUnitCompare(const Unit *a, Int alength, const Unit *b, Int blength, Int exp) { Unit *acc; /* accumulator for result */ Unit accbuff[SD2U(DECBUFFER*2+1)]; /* local buffer */ - Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ - Int accunits, need; /* units in use or needed for acc */ + Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ + Int accunits, need; /* units in use or needed for acc */ const Unit *l, *r, *u; /* work */ Int expunits, exprem, result; /* .. */ - if (exp==0) { /* aligned; fastpath */ + if (exp==0) { /* aligned; fastpath */ if (alength>blength) return 1; if (alength<blength) return -1; /* same number of units in both -- need unit-by-unit compare */ @@ -6251,7 +6229,7 @@ static Int decUnitCompare(const Unit *a, Int alength, return 0; /* all units match */ } /* aligned */ - /* Unaligned. If one is >1 unit longer than the other, padded */ + /* Unaligned. If one is >1 unit longer than the other, padded */ /* approximately, then can return easily */ if (alength>blength+(Int)D2U(exp)) return 1; if (alength+1<blength+(Int)D2U(exp)) return -1; @@ -6298,7 +6276,7 @@ static Int decUnitCompare(const Unit *a, Int alength, /* A may be shorter or longer than B. */ /* */ /* Leading zeros are not removed after a calculation. The result is */ -/* either the same length as the longer of A and B (adding any */ +/* either the same length as the longer of A and B (adding any */ /* shift), or one Unit longer than that (if a Unit carry occurred). */ /* */ /* A and B content are not altered unless C is also A or B. */ @@ -6337,10 +6315,10 @@ static Int decUnitAddSub(const Unit *a, Int alength, const Unit *b, Int blength, Int bshift, Unit *c, Int m) { const Unit *alsu=a; /* A lsu [need to remember it] */ - Unit *clsu=c; /* C ditto */ + Unit *clsu=c; /* C ditto */ Unit *minC; /* low water mark for C */ Unit *maxC; /* high water mark for C */ - eInt carry=0; /* carry integer (could be Long) */ + eInt carry=0; /* carry integer (could be Long) */ Int add; /* work */ #if DECDPUN<=4 /* myriadal, millenary, etc. */ Int est; /* estimated quotient */ @@ -6400,7 +6378,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=(((ueInt)carry>>11)*53687)>>18; *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ if (*c<DECDPUNMAX+1) continue; /* was OK */ carry++; *c-=DECDPUNMAX+1; @@ -6418,7 +6396,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=(((ueInt)carry>>3)*16777)>>21; *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ if (*c<DECDPUNMAX+1) continue; /* was OK */ carry++; *c-=DECDPUNMAX+1; @@ -6434,7 +6412,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=QUOT10(carry, DECDPUN); *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ #else /* remainder operator is undefined if negative, so must test */ if ((ueInt)carry<(DECDPUNMAX+1)*2) { /* fastpath carry +1 */ @@ -6487,7 +6465,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=(((ueInt)carry>>11)*53687)>>18; *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ if (*c<DECDPUNMAX+1) continue; /* was OK */ carry++; *c-=DECDPUNMAX+1; @@ -6505,7 +6483,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=(((ueInt)carry>>3)*16777)>>21; *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ if (*c<DECDPUNMAX+1) continue; /* was OK */ carry++; *c-=DECDPUNMAX+1; @@ -6520,7 +6498,7 @@ static Int decUnitAddSub(const Unit *a, Int alength, carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ est=QUOT10(carry, DECDPUN); *c=(Unit)(carry-est*(DECDPUNMAX+1)); - carry=est-(DECDPUNMAX+1); /* correctly negative */ + carry=est-(DECDPUNMAX+1); /* correctly negative */ #else if ((ueInt)carry<(DECDPUNMAX+1)*2){ /* fastpath carry 1 */ *c=(Unit)(carry-(DECDPUNMAX+1)); @@ -6578,9 +6556,8 @@ static Int decUnitAddSub(const Unit *a, Int alength, /* dn is the number to trim or normalize */ /* set is the context to use to check for clamp */ /* all is 1 to remove all trailing zeros, 0 for just fraction ones */ -/* noclamp is 1 to unconditional (unclamped) trim */ /* dropped returns the number of discarded trailing zeros */ -/* returns dn */ +/* returns dn */ /* */ /* If clamp is set in the context then the number of zeros trimmed */ /* may be limited if the exponent is high. */ @@ -6588,8 +6565,8 @@ static Int decUnitAddSub(const Unit *a, Int alength, /* so special values are unchanged and no error is possible. */ /* ------------------------------------------------------------------ */ static decNumber * decTrim(decNumber *dn, decContext *set, Flag all, - Flag noclamp, Int *dropped) { - Int d, exp; /* work */ + Int *dropped) { + Int d, exp; /* work */ uInt cut; /* .. */ Unit *up; /* -> current Unit */ @@ -6618,7 +6595,7 @@ static decNumber * decTrim(decNumber *dn, decContext *set, Flag all, if (*up%powers[cut]!=0) break; /* found non-0 digit */ #endif /* have a trailing 0 */ - if (!all) { /* trimming */ + if (!all) { /* trimming */ /* [if exp>0 then all trailing 0s are significant for trim] */ if (exp<=0) { /* if digit might be significant */ if (exp==0) break; /* then quit */ @@ -6634,7 +6611,7 @@ static decNumber * decTrim(decNumber *dn, decContext *set, Flag all, if (d==0) return dn; /* none to drop */ /* may need to limit drop if clamping */ - if (set->clamp && !noclamp) { + if (set->clamp) { Int maxd=set->emax-set->digits+1-dn->exponent; if (maxd<=0) return dn; /* nothing possible */ if (d>maxd) d=maxd; @@ -6679,7 +6656,7 @@ static void decReverse(Unit *ulo, Unit *uhi) { /* returns the new length of the integer in the array, in digits */ /* */ /* No overflow is permitted (that is, the uar array must be known to */ -/* be large enough to hold the result, after shifting). */ +/* be large enough to hold the result, after shifting). */ /* ------------------------------------------------------------------ */ static Int decShiftToMost(Unit *uar, Int digits, Int shift) { Unit *target, *source, *first; /* work */ @@ -6695,8 +6672,8 @@ static Int decShiftToMost(Unit *uar, Int digits, Int shift) { next=0; /* all paths */ source=uar+D2U(digits)-1; /* where msu comes from */ target=source+D2U(shift); /* where upper part of first cut goes */ - cut=DECDPUN-MSUDIGITS(shift); /* where to slice */ - if (cut==0) { /* unit-boundary case */ + cut=DECDPUN-MSUDIGITS(shift); /* where to slice */ + if (cut==0) { /* unit-boundary case */ for (; source>=uar; source--, target--) *target=*source; } else { @@ -6727,14 +6704,14 @@ static Int decShiftToMost(Unit *uar, Int digits, Int shift) { /* ------------------------------------------------------------------ */ /* decShiftToLeast -- shift digits in array towards least significant */ /* */ -/* uar is the array */ +/* uar is the array */ /* units is length of the array, in units */ /* shift is the number of digits to remove from the lsu end; it */ /* must be zero or positive and <= than units*DECDPUN. */ /* */ /* returns the new length of the integer in the array, in units */ /* */ -/* Removed digits are discarded (lost). Units not required to hold */ +/* Removed digits are discarded (lost). Units not required to hold */ /* the final result are unchanged. */ /* ------------------------------------------------------------------ */ static Int decShiftToLeast(Unit *uar, Int units, Int shift) { @@ -6797,11 +6774,11 @@ static Int decShiftToLeast(Unit *uar, Int units, Int shift) { /* lostDigits and other status may be set by this. */ /* */ /* Since the input is an operand, it must not be modified. */ -/* Instead, return an allocated decNumber, rounded as required. */ +/* Instead, return an allocated decNumber, rounded as required. */ /* It is the caller's responsibility to free the allocated storage. */ /* */ /* If no storage is available then the result cannot be used, so NULL */ -/* is returned. */ +/* is returned. */ /* ------------------------------------------------------------------ */ static decNumber *decRoundOperand(const decNumber *dn, decContext *set, uInt *status) { @@ -6833,7 +6810,7 @@ static decNumber *decRoundOperand(const decNumber *dn, decContext *set, /* dest is the target decNumber */ /* src is the source decNumber */ /* set is the context [used for length (digits) and rounding mode] */ -/* residue is the residue accumulator */ +/* residue is the residue accumulator */ /* status contains the current status to be updated */ /* */ /* (dest==src is allowed and will be a no-op if fits) */ @@ -6849,20 +6826,20 @@ static void decCopyFit(decNumber *dest, const decNumber *src, /* ------------------------------------------------------------------ */ /* decSetCoeff -- set the coefficient of a number */ /* */ -/* dn is the number whose coefficient array is to be set. */ +/* dn is the number whose coefficient array is to be set. */ /* It must have space for set->digits digits */ /* set is the context [for size] */ /* lsu -> lsu of the source coefficient [may be dn->lsu] */ /* len is digits in the source coefficient [may be dn->digits] */ -/* residue is the residue accumulator. This has values as in */ +/* residue is the residue accumulator. This has values as in */ /* decApplyRound, and will be unchanged unless the */ /* target size is less than len. In this case, the */ /* coefficient is truncated and the residue is updated to */ -/* reflect the previous residue and the dropped digits. */ -/* status is the status accumulator, as usual */ +/* reflect the previous residue and the dropped digits. */ +/* status is the status accumulator, as usual */ /* */ /* The coefficient may already be in the number, or it can be an */ -/* external intermediate array. If it is in the number, lsu must == */ +/* external intermediate array. If it is in the number, lsu must == */ /* dn->lsu and len must == dn->digits. */ /* */ /* Note that the coefficient length (len) may be < set->digits, and */ @@ -6883,7 +6860,7 @@ static void decCopyFit(decNumber *dest, const decNumber *src, /* ------------------------------------------------------------------ */ /* mapping array: maps 0-9 to canonical residues, so that a residue */ /* can be adjusted in the range [-1, +1] and achieve correct rounding */ -/* 0 1 2 3 4 5 6 7 8 9 */ +/* 0 1 2 3 4 5 6 7 8 9 */ static const uByte resmap[10]={0, 3, 3, 3, 3, 5, 7, 7, 7, 7}; static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, Int len, Int *residue, uInt *status) { @@ -6898,7 +6875,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, discard=len-set->digits; /* digits to discard */ if (discard<=0) { /* no digits are being discarded */ - if (dn->lsu!=lsu) { /* copy needed */ + if (dn->lsu!=lsu) { /* copy needed */ /* copy the coefficient array to the result number; no shift needed */ count=len; /* avoids D2U */ up=lsu; @@ -6913,7 +6890,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, /* some digits must be discarded ... */ dn->exponent+=discard; /* maintain numerical value */ - *status|=DEC_Rounded; /* accumulate Rounded status */ + *status|=DEC_Rounded; /* accumulate Rounded status */ if (*residue>1) *residue=1; /* previous residue now to right, so reduce */ if (discard>len) { /* everything, +1, is being discarded */ @@ -6927,7 +6904,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, } } if (*residue!=0) *status|=DEC_Inexact; /* record inexactitude */ - *dn->lsu=0; /* coefficient will now be 0 */ + *dn->lsu=0; /* coefficient will now be 0 */ dn->digits=1; /* .. */ return; } /* total discard */ @@ -6947,12 +6924,12 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, /* here up -> Unit with first discarded digit */ cut=discard-(count-DECDPUN)-1; - if (cut==DECDPUN-1) { /* unit-boundary case (fast) */ + if (cut==DECDPUN-1) { /* unit-boundary case (fast) */ Unit half=(Unit)powers[DECDPUN]>>1; /* set residue directly */ if (*up>=half) { if (*up>half) *residue=7; - else *residue+=5; /* add sticky bit */ + else *residue+=5; /* add sticky bit */ } else { /* <half */ if (*up!=0) *residue=3; /* [else is 0, leave as sticky bit] */ @@ -6963,7 +6940,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, } else { /* shift to least */ count=set->digits; /* now digits to end up with */ - dn->digits=count; /* set the new length */ + dn->digits=count; /* set the new length */ up++; /* move to next */ /* on unit boundary, so shift-down copy loop is simple */ for (target=dn->lsu; count>0; target++, up++, count-=DECDPUN) @@ -6975,7 +6952,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, uInt discard1; /* first discarded digit */ uInt quot, rem; /* for divisions */ if (cut==0) quot=*up; /* is at bottom of unit */ - else /* cut>0 */ { /* it's not at bottom of unit */ + else /* cut>0 */ { /* it's not at bottom of unit */ #if DECDPUN<=4 quot=QUOT10(*up, cut); rem=*up-quot*powers[cut]; @@ -7008,7 +6985,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, } else { /* shift to least needed */ count=set->digits; /* now digits to end up with */ - dn->digits=count; /* set the new length */ + dn->digits=count; /* set the new length */ /* shift-copy the coefficient array to the result number */ for (target=dn->lsu; ; target++) { *target=(Unit)quot; @@ -7037,7 +7014,7 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, /* ------------------------------------------------------------------ */ /* decApplyRound -- apply pending rounding to a number */ /* */ -/* dn is the number, with space for set->digits digits */ +/* dn is the number, with space for set->digits digits */ /* set is the context [for size and rounding mode] */ /* residue indicates pending rounding, being any accumulated */ /* guard and sticky information. It may be: */ @@ -7046,14 +7023,14 @@ static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, /* 1-4: rounding digit is <5 and >0 */ /* 0: the coefficient is exact */ /* -1: as 1, but the hidden digits are subtractive, that */ -/* is, of the opposite sign to dn. In this case the */ +/* is, of the opposite sign to dn. In this case the */ /* coefficient must be non-0. This case occurs when */ /* subtracting a small number (which can be reduced to */ /* a sticky bit); see decAddOp. */ -/* status is the status accumulator, as usual */ +/* status is the status accumulator, as usual */ /* */ /* This routine applies rounding while keeping the length of the */ -/* coefficient constant. The exponent and status are unchanged */ +/* coefficient constant. The exponent and status are unchanged */ /* except if: */ /* */ /* -- the coefficient was increased and is all nines (in which */ @@ -7148,7 +7125,7 @@ static void decApplyRound(decNumber *dn, decContext *set, Int residue, if (bump==0) return; /* no action required */ /* Simply use decUnitAddSub unless bumping up and the number is */ - /* all nines. In this special case set to 100... explicitly */ + /* all nines. In this special case set to 100... explicitly */ /* and adjust the exponent by one (as otherwise could overflow */ /* the array) */ /* Similarly handle all-nines result if bumping down. */ @@ -7162,12 +7139,12 @@ static void decApplyRound(decNumber *dn, decContext *set, Int residue, /* here if it, too, is all nines */ *up=(Unit)powers[count-1]; /* here 999 -> 100 etc. */ for (up=up-1; up>=dn->lsu; up--) *up=0; /* others all to 0 */ - dn->exponent++; /* and bump exponent */ + dn->exponent++; /* and bump exponent */ /* [which, very rarely, could cause Overflow...] */ if ((dn->exponent+dn->digits)>set->emax+1) { decSetOverflow(dn, set, status); } - return; /* done */ + return; /* done */ } /* a full unit to check, with more to come */ if (*up!=DECDPUNMAX) break; /* not still 9s */ @@ -7184,11 +7161,11 @@ static void decApplyRound(decNumber *dn, decContext *set, Int residue, /* this is the last Unit (the msu) */ if (*up!=powers[count-1]) break; /* not 100.. */ /* here if have the 1000... case */ - sup=up; /* save msu pointer */ + sup=up; /* save msu pointer */ *up=(Unit)powers[count]-1; /* here 100 in msu -> 999 */ /* others all to all-nines, too */ for (up=up-1; up>=dn->lsu; up--) *up=(Unit)powers[DECDPUN]-1; - dn->exponent--; /* and bump exponent */ + dn->exponent--; /* and bump exponent */ /* iff the number was at the subnormal boundary (exponent=etiny) */ /* then the exponent is now out of range, so it will in fact get */ @@ -7204,7 +7181,7 @@ static void decApplyRound(decNumber *dn, decContext *set, Int residue, dn->exponent++; *status|=DEC_Underflow | DEC_Subnormal | DEC_Inexact | DEC_Rounded; } - return; /* done */ + return; /* done */ } /* a full unit to check, with more to come */ @@ -7223,7 +7200,7 @@ static void decApplyRound(decNumber *dn, decContext *set, Int residue, /* decFinish -- finish processing a number */ /* */ /* dn is the number */ -/* set is the context */ +/* set is the context */ /* residue is the rounding accumulator (as in decApplyRound) */ /* status is the accumulator */ /* */ @@ -7260,14 +7237,14 @@ static void decFinish(decNumber *dn, decContext *set, Int *residue, /* decFinalize -- final check, clamp, and round of a number */ /* */ /* dn is the number */ -/* set is the context */ +/* set is the context */ /* residue is the rounding accumulator (as in decApplyRound) */ /* status is the status accumulator */ /* */ /* This finishes off the current number by checking for subnormal */ /* results, applying any pending rounding, checking for overflow, */ /* and applying any clamping. */ -/* Underflow and overflow conditions are raised as appropriate. */ +/* Underflow and overflow conditions are raised as appropriate. */ /* All fields are updated as required. */ /* ------------------------------------------------------------------ */ static void decFinalize(decNumber *dn, decContext *set, Int *residue, @@ -7295,12 +7272,12 @@ static void decFinalize(decNumber *dn, decContext *set, Int *residue, nmin.lsu[0]=1; nmin.exponent=set->emin; comp=decCompare(dn, &nmin, 1); /* (signless compare) */ - if (comp==BADINT) { /* oops */ + if (comp==BADINT) { /* oops */ *status|=DEC_Insufficient_storage; /* abandon... */ return; } if (*residue<0 && comp==0) { /* neg residue and dn==Nmin */ - decApplyRound(dn, set, *residue, status); /* might force down */ + decApplyRound(dn, set, *residue, status); /* might force down */ decSetSubnormal(dn, set, residue, status); return; } @@ -7329,27 +7306,27 @@ static void decFinalize(decNumber *dn, decContext *set, Int *residue, dn->digits=decShiftToMost(dn->lsu, dn->digits, shift); } dn->exponent-=shift; /* adjust the exponent to match */ - *status|=DEC_Clamped; /* and record the dirty deed */ + *status|=DEC_Clamped; /* and record the dirty deed */ return; } /* decFinalize */ /* ------------------------------------------------------------------ */ /* decSetOverflow -- set number to proper overflow value */ /* */ -/* dn is the number (used for sign [only] and result) */ +/* dn is the number (used for sign [only] and result) */ /* set is the context [used for the rounding mode, etc.] */ /* status contains the current status to be updated */ /* */ /* This sets the sign of a number and sets its value to either */ /* Infinity or the maximum finite value, depending on the sign of */ -/* dn and the rounding mode, following IEEE 754 rules. */ +/* dn and the rounding mode, following IEEE 854 rules. */ /* ------------------------------------------------------------------ */ static void decSetOverflow(decNumber *dn, decContext *set, uInt *status) { Flag needmax=0; /* result is maximum finite value */ uByte sign=dn->bits&DECNEG; /* clean and save sign bit */ if (ISZERO(dn)) { /* zero does not overflow magnitude */ - Int emax=set->emax; /* limit value */ + Int emax=set->emax; /* limit value */ if (set->clamp) emax-=set->digits-1; /* lower if clamping */ if (dn->exponent>emax) { /* clamp required */ dn->exponent=emax; @@ -7383,7 +7360,7 @@ static void decSetOverflow(decNumber *dn, decContext *set, uInt *status) { } /* decSetOverflow */ /* ------------------------------------------------------------------ */ -/* decSetMaxValue -- set number to +Nmax (maximum normal value) */ +/* decSetMaxValue -- set number to +Nmax (maximum normal value) */ /* */ /* dn is the number to set */ /* set is the context [used for digits and emax] */ @@ -7426,6 +7403,7 @@ static void decSetMaxValue(decNumber *dn, decContext *set) { /* ------------------------------------------------------------------ */ static void decSetSubnormal(decNumber *dn, decContext *set, Int *residue, uInt *status) { + Int dnexp; /* saves original exponent */ decContext workset; /* work */ Int etiny, adjust; /* .. */ @@ -7470,14 +7448,15 @@ static void decSetSubnormal(decNumber *dn, decContext *set, Int *residue, /* adjust>0, so need to rescale the result so exponent becomes Etiny */ /* [this code is similar to that in rescale] */ - workset=*set; /* clone rounding, etc. */ + dnexp=dn->exponent; /* save exponent */ + workset=*set; /* clone rounding, etc. */ workset.digits=dn->digits-adjust; /* set requested length */ - workset.emin-=adjust; /* and adjust emin to match */ + workset.emin-=adjust; /* and adjust emin to match */ /* [note that the latter can be <1, here, similar to Rescale case] */ decSetCoeff(dn, &workset, dn->lsu, dn->digits, residue, status); decApplyRound(dn, &workset, *residue, status); - /* Use 754 default rule: Underflow is set iff Inexact */ + /* Use 754R/854 default rule: Underflow is set iff Inexact */ /* [independent of whether trapped] */ if (*status&DEC_Inexact) *status|=DEC_Underflow; @@ -7618,14 +7597,14 @@ static Int decGetInt(const decNumber *dn) { /* ------------------------------------------------------------------ */ /* decDecap -- decapitate the coefficient of a number */ /* */ -/* dn is the number to be decapitated */ +/* dn is the number to be decapitated */ /* drop is the number of digits to be removed from the left of dn; */ -/* this must be <= dn->digits (if equal, the coefficient is */ +/* this must be <= dn->digits (if equal, the coefficient is */ /* set to 0) */ /* */ /* Returns dn; dn->digits will be <= the initial digits less drop */ -/* (after removing drop digits there may be leading zero digits */ -/* which will also be removed). Only dn->lsu and dn->digits change. */ +/* (after removing drop digits there may be leading zero digits */ +/* which will also be removed). Only dn->lsu and dn->digits change. */ /* ------------------------------------------------------------------ */ static decNumber *decDecap(decNumber *dn, Int drop) { Unit *msu; /* -> target cut point */ @@ -7725,13 +7704,13 @@ static decNumber * decNaNs(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ /* decStatus -- apply non-zero status */ /* */ -/* dn is the number to set if error */ +/* dn is the number to set if error */ /* status contains the current status (not yet in context) */ /* set is the context */ /* */ /* If the status is an error status, the number is set to a NaN, */ /* unless the error was an overflow, divide-by-zero, or underflow, */ -/* in which case the number will have already been set. */ +/* in which case the number will have already been set. */ /* */ /* The context status is then updated with the new status. Note that */ /* this may raise a signal, so control may never return from this */ @@ -7753,7 +7732,7 @@ static void decStatus(decNumber *dn, uInt status, decContext *set) { /* ------------------------------------------------------------------ */ /* decGetDigits -- count digits in a Units array */ /* */ -/* uar is the Unit array holding the number (this is often an */ +/* uar is the Unit array holding the number (this is often an */ /* accumulator of some sort) */ /* len is the length of the array in units [>=1] */ /* */ @@ -7764,7 +7743,7 @@ static void decStatus(decNumber *dn, uInt status, decContext *set) { /* ------------------------------------------------------------------ */ /* This may be called twice during some operations. */ static Int decGetDigits(Unit *uar, Int len) { - Unit *up=uar+(len-1); /* -> msu */ + Unit *up=uar+(len-1); /* -> msu */ Int digits=(len-1)*DECDPUN+1; /* possible digits excluding msu */ #if DECDPUN>4 uInt const *pow; /* work */ @@ -7784,7 +7763,7 @@ static Int decGetDigits(Unit *uar, Int len) { if (*up<10) break; /* is 1-9 */ digits++; #if DECDPUN>2 /* not done yet */ - if (*up<100) break; /* is 10-99 */ + if (*up<100) break; /* is 10-99 */ digits++; #if DECDPUN>3 /* not done yet */ if (*up<1000) break; /* is 100-999 */ @@ -7834,7 +7813,7 @@ void decNumberShow(const decNumber *dn) { } /* now carefully display the coefficient */ - up=dn->lsu+D2U(dn->digits)-1; /* msu */ + up=dn->lsu+D2U(dn->digits)-1; /* msu */ printf("%ld", (LI)*up); for (up=up-1; up>=dn->lsu; up--) { u=*up; @@ -7858,7 +7837,7 @@ void decNumberShow(const decNumber *dn) { /* ------------------------------------------------------------------ */ /* decDumpAr -- display a unit array [debug/check aid] */ /* name is a single-character tag name */ -/* ar is the array to display */ +/* ar is the array to display */ /* len is the length of the array in Units */ /* ------------------------------------------------------------------ */ static void decDumpAr(char name, const Unit *ar, Int len) { @@ -7901,7 +7880,7 @@ static void decDumpAr(char name, const Unit *ar, Int len) { /* rhs is the second (may be DECUNUSED) */ /* set is the context (may be DECUNCONT) */ /* returns 0 if both operands, and the context are clean, or 1 */ -/* otherwise (in which case the context will show an error, */ +/* otherwise (in which case the context will show an error, */ /* unless NULL). Note that res is not cleaned; caller should */ /* handle this so res=NULL case is safe. */ /* The caller is expected to abandon immediately if 1 is returned. */ @@ -7938,7 +7917,7 @@ static Flag decCheckOperands(decNumber *res, const decNumber *lhs, if (set!=DECUNCONT) decContextSetStatus(set, DEC_Invalid_operation); if (res!=DECUNRESU && res!=NULL) { decNumberZero(res); - res->bits=DECNAN; /* qNaN */ + res->bits=DECNAN; /* qNaN */ } } return bad; @@ -7954,7 +7933,7 @@ static Flag decCheckOperands(decNumber *res, const decNumber *lhs, /* ------------------------------------------------------------------ */ static Flag decCheckNumber(const decNumber *dn) { const Unit *up; /* work */ - uInt maxuint; /* .. */ + uInt maxuint; /* .. */ Int ae, d, digits; /* .. */ Int emin, emax; /* .. */ @@ -8025,7 +8004,7 @@ static Flag decCheckNumber(const decNumber *dn) { /* check the exponent. Note that input operands can have exponents */ /* which are out of the set->emin/set->emax and set->digits range */ /* (just as they can have more digits than set->digits). */ - ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ emax=DECNUMMAXE; emin=DECNUMMINE; digits=DECNUMMAXP; @@ -8081,7 +8060,7 @@ static void decCheckInexact(const decNumber *dn, decContext *set) { /* */ /* Semantics is the same as the stdlib malloc routine, but bytes */ /* allocated are accounted for globally, and corruption fences are */ -/* added before and after the 'actual' storage. */ +/* added before and after the 'actual' storage. */ /* ------------------------------------------------------------------ */ /* This routine allocates storage with an extra twelve bytes; 8 are */ /* at the start and hold: */ @@ -8091,16 +8070,17 @@ static void decCheckInexact(const decNumber *dn, decContext *set) { /* ------------------------------------------------------------------ */ static void *decMalloc(size_t n) { uInt size=n+12; /* true size */ - void *alloc; /* -> allocated storage */ - uByte *b, *b0; /* work */ - uInt uiwork; /* for macros */ + void *alloc; /* -> allocated storage */ + uInt *j; /* work */ + uByte *b, *b0; /* .. */ alloc=malloc(size); /* -> allocated storage */ - if (alloc==NULL) return NULL; /* out of strorage */ + if (alloc==NULL) return NULL; /* out of strorage */ b0=(uByte *)alloc; /* as bytes */ decAllocBytes+=n; /* account for storage */ - UBFROMUI(alloc, n); /* save n */ - /* printf(" alloc ++ dAB: %ld (%ld)\n", (LI)decAllocBytes, (LI)n); */ + j=(uInt *)alloc; /* -> first four bytes */ + *j=n; /* save n */ + /* printf(" alloc ++ dAB: %ld (%d)\n", decAllocBytes, n); */ for (b=b0+4; b<b0+8; b++) *b=DECFENCE; for (b=b0+n+8; b<b0+n+12; b++) *b=DECFENCE; return b0+8; /* -> play area */ @@ -8119,20 +8099,20 @@ static void *decMalloc(size_t n) { /* is, offset by 8). */ /* ------------------------------------------------------------------ */ static void decFree(void *alloc) { - uInt n; /* original length */ + uInt *j, n; /* pointer, original length */ uByte *b, *b0; /* work */ - uInt uiwork; /* for macros */ if (alloc==NULL) return; /* allowed; it's a nop */ b0=(uByte *)alloc; /* as bytes */ b0-=8; /* -> true start of storage */ - n=UBTOUI(b0); /* lift length */ + j=(uInt *)b0; /* -> first four bytes */ + n=*j; /* lift */ for (b=b0+4; b<b0+8; b++) if (*b!=DECFENCE) printf("=== Corrupt byte [%02x] at offset %d from %ld ===\n", *b, - b-b0-8, (LI)b0); + b-b0-8, (Int)b0); for (b=b0+n+8; b<b0+n+12; b++) if (*b!=DECFENCE) printf("=== Corrupt byte [%02x] at offset +%d from %ld, n=%ld ===\n", *b, - b-b0-8, (LI)b0, (LI)n); + b-b0-8, (Int)b0, n); free(b0); /* drop the storage */ decAllocBytes-=n; /* account for storage */ /* printf(" free -- dAB: %d (%d)\n", decAllocBytes, -n); */ |