aboutsummaryrefslogtreecommitdiff
path: root/gdb
diff options
context:
space:
mode:
Diffstat (limited to 'gdb')
-rw-r--r--gdb/ChangeLog10
-rw-r--r--gdb/ppc-linux-nat.c58
2 files changed, 31 insertions, 37 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index f3b1b23..590e8d9 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2006-05-05: Paul Gilliam <pgilliam@us.ibm.com>
+
+ * ppc-linux-nat.c: Clean up types for ptrace.
+ Replace (CORE_ADDR) with (uintptr_t) to avoid the size difference
+ between a CORE_ADDR and a void* on ppc64 systems compiled for 32-bits.
+
2006-05-05 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_disconnect): Add TARGET argument.
@@ -25,8 +31,8 @@
2006-05-03 Vladimir Prus <ghost@cs.msu.su>
- * varobj.c (c_value_of_variable): Ignore top-level references.
- (Committed by Jim Blandy.)
+ * varobj.c (c_value_of_variable): Ignore top-level references.
+ (Committed by Jim Blandy.)
2006-04-30 Mark Kettenis <kettenis@gnu.org>
diff --git a/gdb/ppc-linux-nat.c b/gdb/ppc-linux-nat.c
index 7697862..b4931cb 100644
--- a/gdb/ppc-linux-nat.c
+++ b/gdb/ppc-linux-nat.c
@@ -30,6 +30,7 @@
#include "target.h"
#include "linux-nat.h"
+#include <stdint.h>
#include <sys/types.h>
#include <sys/param.h>
#include <signal.h>
@@ -44,18 +45,6 @@
#include "gregset.h"
#include "ppc-tdep.h"
-#ifndef PT_READ_U
-#define PT_READ_U PTRACE_PEEKUSR
-#endif
-#ifndef PT_WRITE_U
-#define PT_WRITE_U PTRACE_POKEUSR
-#endif
-
-/* Default the type of the ptrace transfer to int. */
-#ifndef PTRACE_XFER_TYPE
-#define PTRACE_XFER_TYPE int
-#endif
-
/* Glibc's headers don't define PTRACE_GETVRREGS so we cannot use a
configure time check. Some older glibc's (for instance 2.2.1)
don't have a specific powerpc version of ptrace.h, and fall back on
@@ -126,13 +115,12 @@ typedef char gdb_vrregset_t[SIZEOF_VRREGS];
/* On PPC processors that support the the Signal Processing Extension
(SPE) APU, the general-purpose registers are 64 bits long.
- However, the ordinary Linux kernel PTRACE_PEEKUSR / PTRACE_POKEUSR
- / PT_READ_U / PT_WRITE_U ptrace calls only access the lower half of
- each register, to allow them to behave the same way they do on
- non-SPE systems. There's a separate pair of calls,
- PTRACE_GETEVRREGS / PTRACE_SETEVRREGS, that read and write the top
- halves of all the general-purpose registers at once, along with
- some SPE-specific registers.
+ However, the ordinary Linux kernel PTRACE_PEEKUSER / PTRACE_POKEUSER
+ ptrace calls only access the lower half of each register, to allow
+ them to behave the same way they do on non-SPE systems. There's a
+ separate pair of calls, PTRACE_GETEVRREGS / PTRACE_SETEVRREGS, that
+ read and write the top halves of all the general-purpose registers
+ at once, along with some SPE-specific registers.
GDB itself continues to claim the general-purpose registers are 32
bits long. It has unnamed raw registers that hold the upper halves
@@ -190,7 +178,7 @@ ppc_register_u_addr (int regno)
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* NOTE: cagney/2003-11-25: This is the word size used by the ptrace
interface, and not the wordsize of the program's ABI. */
- int wordsize = sizeof (PTRACE_XFER_TYPE);
+ int wordsize = sizeof (long);
/* General purpose registers occupy 1 slot each in the buffer */
if (regno >= tdep->ppc_gp0_regnum
@@ -384,17 +372,17 @@ fetch_register (int tid, int regno)
return;
}
- /* Read the raw register using PTRACE_XFER_TYPE sized chunks. On a
+ /* Read the raw register using sizeof(long) sized chunks. On a
32-bit platform, 64-bit floating-point registers will require two
transfers. */
for (bytes_transferred = 0;
bytes_transferred < register_size (current_gdbarch, regno);
- bytes_transferred += sizeof (PTRACE_XFER_TYPE))
+ bytes_transferred += sizeof (long))
{
errno = 0;
- *(PTRACE_XFER_TYPE *) & buf[bytes_transferred]
- = ptrace (PT_READ_U, tid, (PTRACE_ARG3_TYPE) regaddr, 0);
- regaddr += sizeof (PTRACE_XFER_TYPE);
+ *(long *) &buf[bytes_transferred]
+ = ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0);
+ regaddr += sizeof (long);
if (errno != 0)
{
char message[128];
@@ -406,7 +394,7 @@ fetch_register (int tid, int regno)
/* Now supply the register. Keep in mind that the regcache's idea
of the register's size may not be a multiple of sizeof
- (PTRACE_XFER_TYPE). */
+ (long). */
if (gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_LITTLE)
{
/* Little-endian values are always found at the left end of the
@@ -668,10 +656,10 @@ store_register (int tid, int regno)
/* First collect the register. Keep in mind that the regcache's
idea of the register's size may not be a multiple of sizeof
- (PTRACE_XFER_TYPE). */
+ (long). */
memset (buf, 0, sizeof buf);
bytes_to_transfer = align_up (register_size (current_gdbarch, regno),
- sizeof (PTRACE_XFER_TYPE));
+ sizeof (long));
if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
{
/* Little-endian values always sit at the left end of the buffer. */
@@ -685,12 +673,12 @@ store_register (int tid, int regno)
regcache_raw_collect (current_regcache, regno, buf + padding);
}
- for (i = 0; i < bytes_to_transfer; i += sizeof (PTRACE_XFER_TYPE))
+ for (i = 0; i < bytes_to_transfer; i += sizeof (long))
{
errno = 0;
- ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) regaddr,
- *(PTRACE_XFER_TYPE *) & buf[i]);
- regaddr += sizeof (PTRACE_XFER_TYPE);
+ ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr,
+ *(long *) &buf[i]);
+ regaddr += sizeof (long);
if (errno == EIO
&& regno == tdep->ppc_fpscr_regnum)
@@ -901,7 +889,7 @@ ppc_linux_stopped_by_watchpoint (void)
(siginfo.si_code & 0xffff) != 0x0004)
return 0;
- last_stopped_data_address = (CORE_ADDR) siginfo.si_addr;
+ last_stopped_data_address = (uintptr_t) siginfo.si_addr;
return 1;
}
@@ -926,7 +914,7 @@ supply_gregset (gdb_gregset_t *gregsetp)
{
/* NOTE: cagney/2003-11-25: This is the word size used by the ptrace
interface, and not the wordsize of the program's ABI. */
- int wordsize = sizeof (PTRACE_XFER_TYPE);
+ int wordsize = sizeof (long);
ppc_linux_supply_gregset (current_regcache, -1, gregsetp,
sizeof (gdb_gregset_t), wordsize);
}
@@ -936,7 +924,7 @@ right_fill_reg (int regnum, void *reg)
{
/* NOTE: cagney/2003-11-25: This is the word size used by the ptrace
interface, and not the wordsize of the program's ABI. */
- int wordsize = sizeof (PTRACE_XFER_TYPE);
+ int wordsize = sizeof (long);
/* Right fill the register. */
regcache_raw_collect (current_regcache, regnum,
((bfd_byte *) reg