diff options
Diffstat (limited to 'gdb')
| -rw-r--r-- | gdb/.Sanitize | 43 | ||||
| -rw-r--r-- | gdb/ChangeLog | 52 | ||||
| -rw-r--r-- | gdb/Makefile.in | 4 | ||||
| -rw-r--r-- | gdb/configure.in | 4 |
4 files changed, 93 insertions, 10 deletions
diff --git a/gdb/.Sanitize b/gdb/.Sanitize index d707964..68e5c85 100644 --- a/gdb/.Sanitize +++ b/gdb/.Sanitize @@ -29,6 +29,20 @@ else fi fi +gdbtk_files="gdbtk.c gdbtk.tcl" + +if ( echo $* | grep keep\-gdbtk > /dev/null ) ; then + keep_these_too="${gdbtk_files} ${keep_these_too}" + if [ -n "${verbose}" ] ; then + echo Keeping ${gdbtk_files} + fi +else + lose_these_too="${gdbtk_files} ${lose_these_too}" + if [ -n "${verbose}" ] ; then + echo Deleting ${gdbtk_files} + fi +fi + # All files listed between the "Things-to-keep:" line and the # "Files-to-sed:" line will be kept. All other files will be removed. # Directories listed in this section will have their own Sanitize @@ -131,8 +145,6 @@ gdba.el gdbcmd.h gdbcore.h gdbserver -gdbtk.c -gdbtk.tcl gdbtypes.c gdbtypes.h go32-xdep.c @@ -366,7 +378,32 @@ else done fi -r16_files = "configure.in" +echo Catering to RMS by removing traces of \"gdbtk\"... + +# Don't try to clean directories here, as the 'mv' command will fail. +# Also, grep fails on NFS mounted directories. +if ( echo $* | grep keep\-gdbtk > /dev/null ) ; then + for i in * ; do + if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then + echo Keeping gdbtk stuff in $i + fi + done +else + for i in * ; do + if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then + echo Removing traces of \"gdbtk\" out of $i... + cp $i new + sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new + if [ -n "${safe}" -a ! -f .Recover/$i ] ; then + echo Caching $i in .Recover... + mv $i .Recover + fi + mv new $i + fi + done +fi + +r16_files="configure.in" if ( echo $* | grep keep\-r16 > /dev/null ) ; then for i in $r16_files ; do diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 1e4505b..97f3045 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -92,8 +92,10 @@ Fri Dec 23 17:03:13 1994 Steve Chamberlain (sac@jonny.cygnus.com) Fri Dec 23 16:18:50 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in (CLIBS): Put LIBIBERTY last. +start-sanitize-gdbtk * gdbtk.c (gdbtk_wait gdbtk_init): Portability improvements for SIGIO handling. +end-sanitize-gdbtk Thu Dec 22 09:27:16 1994 Jim Kingdon <kingdon@deneb.cygnus.com> @@ -112,7 +114,7 @@ Wed Dec 21 14:00:26 1994 Rob Savoye <rob@darkstar.cygnus.com> Tue Dec 20 23:01:17 1994 Stu Grossman (grossman@cygnus.com) * config/mips/xm-irix4.h, config/mips/xm-irix5.h: #define - _BSD_COMPAT to get reliable signal handling (needed for GDBtk). + _BSD_COMPAT to get reliable signal handling. Tue Dec 20 11:44:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) @@ -122,6 +124,7 @@ Tue Dec 20 11:44:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * value.h: Remove obsolete comments about FRAME vs struct frame_info *. +start-sanitize-gdbtk Mon Dec 19 09:55:47 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (update_assembly): Force update to make sure that pc @@ -159,6 +162,7 @@ Sun Dec 18 23:31:20 1994 Stu Grossman (grossman@cygnus.com) * (create_source_window): Add source file selection to View menu. * (create_command_window (<Key-Return> binding): Quote text fed into gdb_cmd to prevent eval errors. +end-sanitize-gdbtk Sun Dec 18 11:52:58 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) @@ -247,20 +251,23 @@ Thu Dec 15 16:55:35 1994 Stan Shebs <shebs@andros.cygnus.com> Thu Dec 15 16:40:10 1994 Stu Grossman (grossman@cygnus.com) - * defs.h, gdbtk.c (gdbtk_fputs), main.c (gdb_fputs), top.c: Add - stream arg to fputs_unfiltered_hook. Differentiate stdout from - stderr when passing text into tcl land. + * defs.h, main.c (gdb_fputs), top.c: Add stream arg to + fputs_unfiltered_hook. * defs.h, top.c, utils.c (error): Add error_hook. +start-sanitize-gdbtk * gdbtk.c: Improve mechanism for capturing output values. (full_filename): Remove. (gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl land with call_wrapper. This prevents longjmps (usually via error()) from jumping out of tcl/tk and leaving things in an indeterminate state. + (gdbtk_fputs): Differentiate stdout from stderr when passing text + into tcl land. * gdbtk.tcl: New view option to disable line numbers. Put catch around most uses of gdb_cmd. Add update button to reg config window. Stop doing immediate updates when selecting registers. Change register view values into checkbuttons. +end-sanitize-gdbtk Tue Dec 13 15:15:33 1994 Stan Shebs <shebs@andros.cygnus.com> @@ -281,6 +288,7 @@ Mon Dec 12 17:08:02 1994 Stan Shebs <shebs@andros.cygnus.com> (INIT_EXTRA_FRAME_INFO): Call sparc_init_extra_frame_info. (PRINT_EXTRA_FRAME_INFO): Define. +start-sanitize-gdbtk Mon Dec 12 16:59:29 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (reg_config_menu create_registers_window @@ -288,6 +296,7 @@ Mon Dec 12 16:59:29 1994 Stu Grossman (grossman@cygnus.com) for register display list. * (recompute_reg_display_list update_registers): Fix bug with not displaying all registers. +end-sanitize-gdbtk Mon Dec 12 13:06:59 1994 Jim Kingdon <kingdon@deneb.cygnus.com> @@ -299,6 +308,7 @@ Mon Dec 12 13:06:59 1994 Jim Kingdon <kingdon@deneb.cygnus.com> not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which the HP compiler doesn't like. +start-sanitize-gdbtk Mon Dec 12 12:22:21 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.c: New tcl commands: gdb_fetch_registers, @@ -313,6 +323,7 @@ Mon Dec 12 12:22:21 1994 Stu Grossman (grossman@cygnus.com) populate_reg_window update_registers): Revamp register window. Allow selection of registers to be displayed. Highlight changed registers. +end-sanitize-gdbtk Fri Dec 9 15:50:05 1994 Stan Shebs <shebs@andros.cygnus.com> @@ -431,6 +442,7 @@ Mon Nov 28 11:03:14 1994 J.T. Conklin (jtc@rtl.cygnus.com) * config/rs6000/tm-rs6000.h (setpgrp): move defn from here... * config/rs6000/xm-rs6000.h: ...to here. +start-sanitize-gdbtk Mon Nov 28 09:17:20 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (build_framework): Fix bug with setting window titles. @@ -439,6 +451,7 @@ Mon Nov 28 09:17:20 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Re-arrange windows using new, consistent layout. Clean up lots of code and centralize framework initialization. +end-sanitize-gdbtk Fri Nov 25 21:26:02 1994 Jeff Law (law@snake.cs.utah.edu) @@ -572,7 +585,9 @@ Wed Nov 16 16:41:52 1994 Stan Shebs (shebs@andros.cygnus.com) Wed Nov 16 15:28:29 1994 Rob Savoye (rob@cygnus.com) +start-sanitize-gdbtk * Makefile.in: Fix the test for installing gdbtk. +end-sanitize-gdbtk * hppa-tdep.c: Remove including sys/dir.h from a target file. @@ -606,12 +621,14 @@ Tue Nov 15 01:03:56 1994 Rob Savoye (rob@slipknot.cygnus.com) to set remote load type and protocol. * rom68k-rom.c: Add to_stop in target_ops. +start-sanitize-gdbtk Mon Nov 14 08:51:29 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in: Install gdbtk.tcl. * configure.in: Add ENABLE_GDBTK flag. * gdbtk.c (gdb_sourcelines): Returns list of source lines containing code. (gdb_regnames): Returns list of register names. +end-sanitize-gdbtk Sat Nov 12 21:55:47 1994 Jeff Law (law@snake.cs.utah.edu) @@ -769,7 +786,7 @@ Thu Nov 3 15:19:17 1994 Stan Shebs (shebs@andros.cygnus.com) * frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove. * blockframe.c (get_frame_info): Remove. * a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c, - breakpoint.h, energize.c, findvar.c, gdbtk.c, gould-pinsn.c, + breakpoint.h, energize.c, findvar.c, gould-pinsn.c, h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c, infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c, mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c, @@ -792,7 +809,9 @@ Thu Nov 3 14:25:24 1994 Stu Grossman (grossman@cygnus.com) remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c, w89k-rom.c, target.c, target.h: Add support for target_stop(). +start-sanitize-gdbtk * gdbtk.c (gdb_stop): Switch to target_stop(). +end-sanitize-gdbtk Thu Nov 3 01:23:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) @@ -813,6 +832,7 @@ Wed Nov 2 11:01:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/Makefile.in: install gdbserve.nlm. +start-sanitize-gdbtk Tue Nov 1 16:41:12 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in: Use $(objdir)/tcl and $(objdir)/tk if they are @@ -823,6 +843,7 @@ Tue Nov 1 16:41:12 1994 Stu Grossman (grossman@cygnus.com) * (gdbtk_init): Use ConnectionNumber macro instead of referencing Display structure directly. * gdbtk.tcl: Change exit button to quit button. +end-sanitize-gdbtk Tue Nov 1 13:00:46 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) @@ -892,9 +913,12 @@ Fri Oct 28 16:16:52 1994 Stan Shebs (shebs@andros.cygnus.com) Wed Oct 26 15:41:07 1994 Stu Grossman (grossman@cygnus.com) - * defs.h, gdbtk.c, main.c, top.c: Change sense and name of + * defs.h, main.c, top.c: Change sense and name of no_windows variable. Now called use_windows, and defaults to off (for compatibility). +start-sanitize-gdbtk + * gdbtk.c: Ditto. +end-sanitize-gdbtk Wed Oct 26 12:20:53 1994 Jim Kingdon <kingdon@cygnus.com> @@ -923,6 +947,7 @@ Thu Oct 20 17:35:45 1994 Stu Grossman (grossman@cygnus.com) target_wait_hook to allow GUI to handle blocking for inferior. Call call_command_hook in execute_command to provide means for wrapping commands with GUI state change updates. +start-sanitize-gdbtk * gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur. * (gdb_stop): New tcl command to stop the target process. * (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target @@ -940,9 +965,10 @@ Thu Oct 20 17:35:45 1994 Stu Grossman (grossman@cygnus.com) * Change bindings of mouse button 1 in assembly and source window to just set or clear breakpoints when in the margin tag. * Change shape of register window to be more vertical to better - reflect it's contents. + reflect its contents. * Add stop button. * Cleanup some code around command window bindings. +end-sanitize-gdbtk * infrun.c (wait_for_inferior): Make sure through_sigtramp_breakpoint is non-null before deleting. @@ -1523,9 +1549,11 @@ Mon Sep 19 07:48:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) char * (from const char *) before assigning. Don't save string we pass to record_minimal_symbol (it already saves it). +start-sanitize-gdbtk Sat Sep 17 17:05:14 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Let ^U delete lines in the command window. +end-sanitize-gdbtk Sat Sep 17 02:26:58 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) @@ -1575,6 +1603,7 @@ Fri Sep 16 15:40:34 1994 Stu Grossman (grossman@cygnus.com) * defs.h (QUIT): Call interactive_hook to allow GUI to interrupt. Also, add decl for symtab_to_filename. +start-sanitize-gdbtk * gdbtk.c: Replace calls to full_filename with symtab_to_filename. * gdbtk.tcl: New routine pc_to_line replaces in line code. New routine decr replaces in line code. @@ -1586,6 +1615,7 @@ Fri Sep 16 15:40:34 1994 Stu Grossman (grossman@cygnus.com) on PC instead of function name, since function names can be ambiguous (usually seen with shared libs). Also, use catch to simplify code where we don't care about failures. +end-sanitize-gdbtk * source.c (symtab_to_filename): New. Returns the file associated with a symtab. * top.c: Define interactive_hook. Called during QUIT to animate @@ -1632,6 +1662,7 @@ Wed Sep 14 14:26:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) Having the objfile point to bfd_asymbol_name directly doesn't work if we save and restore a mapped symbol file. +start-sanitize-gdbtk Wed Sep 14 00:55:26 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Add ref counts to breakpoint tags. @@ -1642,6 +1673,7 @@ Wed Sep 14 00:55:26 1994 Stu Grossman (grossman@cygnus.com) * Set names of top-level windows. * Add register display window. * Add PC to label of assembly window. +end-sanitize-gdbtk Tue Sep 13 18:23:26 1994 Rob Savoye (rob@darkstar.cygnus.com) @@ -1649,6 +1681,7 @@ Tue Sep 13 18:23:26 1994 Rob Savoye (rob@darkstar.cygnus.com) to add a generic ROM monitor interface, and support file for the WinBond W89K and the Oki OP50N PA based target boards. +start-sanitize-gdbtk Tue Sep 13 08:59:04 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.c (gdbtk_flush gdbtk_fputs): Buffer up output to make @@ -1666,6 +1699,7 @@ Tue Sep 13 08:59:04 1994 Stu Grossman (grossman@cygnus.com) * Add assembly window, and breapoint support. * Make button 1 in margin toggle breakpoints. * Use stippling to indicate breakpoint disabling. +end-sanitize-gdbtk Sun Sep 11 22:34:57 1994 Jeff Law (law@snake.cs.utah.edu) @@ -1793,9 +1827,11 @@ Sun Sep 4 16:06:34 1994 Stan Shebs (shebs@andros.cygnus.com) * config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h. * config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h. +start-sanitize-gdbtk Fri Sep 2 19:11:40 1994 Stu Grossman (grossman@cygnus.com) * configure.in: Don't symlink to gdbtk.tcl if it's already there. +end-sanitize-gdbtk Fri Sep 2 17:35:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) @@ -2449,11 +2485,13 @@ Thu Jul 28 14:37:36 1994 Stu Grossman (grossman@cygnus.com) * Change _initialize_utils to initialize_utils cuz we don't use automatic initialization of utils.c anymore. +start-sanitize-gdbtk * Support for TK GUI. * Makefile.in: Add rule for gdbtk.o. * configure.in: Add support for --enable-gdbtk. * gdbtk.c: New file. Contains support routines for TK interface. * gdbtk.tcl: New file. Implements GUI policy. +end-sanitize-gdbtk * remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer necessary. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 782ee45..1917703 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -513,9 +513,11 @@ install-only: fi ; \ $(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \ $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1 + # start-sanitize-gdbtk if [ x"$(ENABLE_GDBTK)" != x ] ; then \ $(INSTALL_DATA) $(srcdir)/gdbtk.tcl $(libdir)/gdbtk.tcl ; \ fi + # end-sanitize-gdbtk @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do uninstall: force @@ -1103,10 +1105,12 @@ findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \ $(inferior_h) target.h terminal.h thread.h +# start-sanitize-gdbtk gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \ $(bfd_h) symfile.h objfiles.h target.h $(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(srcdir)/gdbtk.c \ -DGDBTK_FILENAME=\"$(libdir)/gdbtk.tcl\" +# end-sanitize-gdbtk gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \ $(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \ diff --git a/gdb/configure.in b/gdb/configure.in index 29ee96f..0fed66c 100644 --- a/gdb/configure.in +++ b/gdb/configure.in @@ -398,11 +398,13 @@ else links="${links} nm.h" fi +# start-sanitize-gdbtk # Make it possible to use the GUI without doing a full install if [ "${enable_gdbtk}" = "yes" -a ! -f gdbtk.tcl ] ; then files="${files} gdbtk.tcl" links="${links} gdbtk.tcl" fi +# end-sanitize-gdbtk # post-target: @@ -420,6 +422,7 @@ if [ "${nativefile}" = "" ] ; then mv -f Makefile.tem Makefile fi +# start-sanitize-gdbtk if [ "${enable_gdbtk}" = "yes" ] ; then sed -e '/# End of host and/i\ \ @@ -429,6 +432,7 @@ ENABLE_CLIBS = $(TCL) $(TK) -lX11 -lm ' < Makefile > Makefile.tem mv -f Makefile.tem Makefile fi +# end-sanitize-gdbtk sed -e '/^TM_FILE[ ]*=/s,^TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/, /^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/, |