diff options
Diffstat (limited to 'gdb')
59 files changed, 670 insertions, 662 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index a62e85f..477de90 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,11 @@ +Sat Feb 1 23:51:01 1997 Bob Manson <manson@charmed.cygnus.com> + + * gdb.*/*.exp: Replace $prompt with $gdb_prompt. + + * gdb.base/scope.exp: Use gdb_test. + * gdb.c++/classes.exp: Ditto. + * gdb.c++/inherit.exp: Ditto. + Fri Jan 31 13:09:12 1997 Bob Manson <manson@charmed.cygnus.com> * gdb.base/crossload.exp: Don't use execute_anywhere, use diff --git a/gdb/testsuite/config/monitor.exp b/gdb/testsuite/config/monitor.exp index a8e79be..facb5be 100644 --- a/gdb/testsuite/config/monitor.exp +++ b/gdb/testsuite/config/monitor.exp @@ -22,7 +22,7 @@ load_lib gdb.exp # Set gdb to target the monitor # proc gdb_target_monitor { } { - global prompt + global gdb_prompt global exit_status global timeout @@ -89,7 +89,7 @@ proc gdb_load { arg } { global loadpath global loadfile global GDB - global prompt + global gdb_prompt global timeout if { $arg != "" } { @@ -108,13 +108,13 @@ proc gdb_load { arg } { set timeout 1000 verbose "Timeout is now $timeout seconds" 2 expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { if { $verbose > 1 } { send_user "Loaded $arg into $GDB\n" } return 1 } - -re "$prompt $" { + -re "$gdb_prompt $" { if { $verbose > 1 } { perror "GDB couldn't load." } diff --git a/gdb/testsuite/config/nind.exp b/gdb/testsuite/config/nind.exp index f44cc58..dc8006a 100644 --- a/gdb/testsuite/config/nind.exp +++ b/gdb/testsuite/config/nind.exp @@ -29,7 +29,7 @@ proc gdb_load { arg } { global verbose global loadpath global loadfile - global prompt + global gdb_prompt global GDB set loadfile [file tail $arg] set loadpath [file dirname $arg] @@ -43,7 +43,7 @@ proc gdb_start { } { global GDB global GDBFLAGS global spawn_id - global prompt + global gdb_prompt global verbose send_user "Not implememted yet\n" ; return -1 } diff --git a/gdb/testsuite/config/slite.exp b/gdb/testsuite/config/slite.exp index 771a9e1..5a393ca 100644 --- a/gdb/testsuite/config/slite.exp +++ b/gdb/testsuite/config/slite.exp @@ -32,7 +32,7 @@ load_lib remote.exp load_lib gdb.exp -set prompt "\\(gdb\\)" +set gdb_prompt "\\(gdb\\)" # # gdb_load -- load a file into the GDB. @@ -43,7 +43,7 @@ proc gdb_load { arg } { global verbose global loadpath global loadfile - global prompt + global gdb_prompt global GDB global expect_out global gdb_spawn_id @@ -61,8 +61,8 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Reading symbols from.*done..*$prompt $" {} - -i $gdb_spawn_id -re "$prompt $" { perror "GDB couldn't read file" } + -i $gdb_spawn_id -re "Reading symbols from.*done..*$gdb_prompt $" {} + -i $gdb_spawn_id -re "$gdb_prompt $" { perror "GDB couldn't read file" } -i $gdb_spawn_id timeout { perror "(timeout) read symbol file" ; return -1 } } @@ -86,8 +86,8 @@ proc gdb_load { arg } { set timeout 60 verbose "Timeout is now $timeout seconds" 2 expect { - -i $gdb_spawn_id -re "Remote target.*$prompt $" { } - -i $gdb_spawn_id -re ".*SPARClite appears to be alive.*$prompt $" { + -i $gdb_spawn_id -re "Remote target.*$gdb_prompt $" { } + -i $gdb_spawn_id -re ".*SPARClite appears to be alive.*$gdb_prompt $" { if $verbose>1 then { send_user "Set target to $targetname\n" } @@ -111,12 +111,12 @@ proc gdb_load { arg } { set timeout 2400 verbose "Timeout is now $timeout seconds" 2 expect { - -i $gdb_spawn_id -re "Loading.*$prompt $" { + -i $gdb_spawn_id -re "Loading.*$gdb_prompt $" { verbose "Loaded $arg into $GDB" 1 set timeout 30 verbose "Timeout is now $timeout seconds" 2 } - -i $gdb_spawn_id -re "$prompt $" { + -i $gdb_spawn_id -re "$gdb_prompt $" { if $verbose>1 then { perror "GDB couldn't load." } @@ -134,7 +134,7 @@ proc gdb_load { arg } { sleep 2; send_gdb ""; expect { - -i $gdb_spawn_id -re ".*$prompt $" { verbose "Run command succeded" } + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Run command succeded" } -i $gdb_spawn_id default { perror "error sending monitor run command"; } @@ -153,7 +153,7 @@ proc gdb_load { arg } { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Set remote target to [target_info serial]" 2 } -i $gdb_spawn_id timeout { diff --git a/gdb/testsuite/config/sparclet-old.exp b/gdb/testsuite/config/sparclet-old.exp index ea97d19..41f5c2f 100644 --- a/gdb/testsuite/config/sparclet-old.exp +++ b/gdb/testsuite/config/sparclet-old.exp @@ -24,7 +24,7 @@ load_lib remote.exp load_lib gdb.exp -set prompt "\\(gdbslet\\)" +set gdb_prompt "\\(gdbslet\\)" # @@ -37,7 +37,7 @@ set prompt "\\(gdbslet\\)" # proc gdb_run_cmd {} { - global prompt + global gdb_prompt global gdb_spawn_id set timeout 60 @@ -74,8 +74,8 @@ proc gdb_run_cmd {} { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Remote target.*$prompt $" { } - -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$prompt $" { + -i $gdb_spawn_id -re "Remote target.*$gdb_prompt $" { } + -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { if $verbose>1 then { send_user "Set target to $targetname\n" } @@ -90,7 +90,7 @@ proc gdb_run_cmd {} { send_gdb "disable\n"; expect { - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Breakpoints disabled" 2 } -i $gdb_spawn_id timeout { @@ -132,7 +132,7 @@ proc gdb_run_cmd {} { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "interrupting remote stub succeeded" } -i $gdb_spawn_id timeout { @@ -151,7 +151,7 @@ proc gdb_run_cmd {} { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "connected to stub at [target_info gdb_serial]" 2 } -i $gdb_spawn_id timeout { @@ -165,7 +165,7 @@ proc gdb_run_cmd {} { send_gdb "enable\n"; expect { - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Breakpoints enabled" 2 } -i $gdb_spawn_id timeout { @@ -190,7 +190,7 @@ proc gdb_load { arg } { global verbose global loadpath global loadfile - global prompt + global gdb_prompt global GDB global expect_out global gdb_spawn_id @@ -215,8 +215,8 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Reading symbols from.*done..*$prompt $" {} - -i $gdb_spawn_id -re "$prompt $" { perror "GDB couldn't find loader" } + -i $gdb_spawn_id -re "Reading symbols from.*done..*$gdb_prompt $" {} + -i $gdb_spawn_id -re "$gdb_prompt $" { perror "GDB couldn't find loader" } -i $gdb_spawn_id timeout { perror "(timeout) read symbol file" ; return -1 @@ -235,8 +235,8 @@ proc gdb_load { arg } { send_gdb "target $protocol udp [target_info netport]\n"; } expect { - -i $gdb_spawn_id -re "Remote target.*$prompt $" { } - -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$prompt $" { + -i $gdb_spawn_id -re "Remote target.*$gdb_prompt $" { } + -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { if $verbose>1 then { send_user "Set target to $targetname\n" } @@ -280,7 +280,7 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Running loader succeeded" } -i $gdb_spawn_id timeout { @@ -304,8 +304,8 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Reading symbols from.*done..*$prompt $" {} - -i $gdb_spawn_id -re "$prompt $" { perror "GDB couldn't read file" } + -i $gdb_spawn_id -re "Reading symbols from.*done..*$gdb_prompt $" {} + -i $gdb_spawn_id -re "$gdb_prompt $" { perror "GDB couldn't read file" } -i $gdb_spawn_id timeout { perror "(timeout) read symbol file" ; return -1 @@ -319,7 +319,7 @@ proc gdb_load { arg } { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Set remote target to [target_info serial]" 2 } -i $gdb_spawn_id timeout { @@ -340,12 +340,12 @@ proc gdb_load { arg } { set timeout 1200 verbose "Timeout is now $timeout seconds" 2 expect { - -i $gdb_spawn_id -re "Loading.*$prompt $" { + -i $gdb_spawn_id -re "Loading.*$gdb_prompt $" { verbose "Loaded $arg into $GDB" 1 set timeout 60 verbose "Timeout is now $timeout seconds" 2 } - -i $gdb_spawn_id -re "$prompt $" { + -i $gdb_spawn_id -re "$gdb_prompt $" { if $verbose>1 then { perror "GDB couldn't load." } @@ -384,8 +384,8 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Remote target.*$prompt $" { } - -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$prompt $" { + -i $gdb_spawn_id -re "Remote target.*$gdb_prompt $" { } + -i $gdb_spawn_id -re ".*SPARCLET appears to be alive.*$gdb_prompt $" { if $verbose>1 then { send_user "Set target to $targetname\n" } @@ -429,7 +429,7 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "interrupting remote stub succeeded" } -i $gdb_spawn_id timeout { @@ -448,7 +448,7 @@ proc gdb_load { arg } { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "connected to stub at [target_info gdb_serial]" 2 } -i $gdb_spawn_id timeout { diff --git a/gdb/testsuite/config/sparclet.exp b/gdb/testsuite/config/sparclet.exp index c97f5fc..dc6199d 100644 --- a/gdb/testsuite/config/sparclet.exp +++ b/gdb/testsuite/config/sparclet.exp @@ -24,7 +24,7 @@ load_lib remote.exp load_lib gdb.exp -set prompt "\\(gdbslet\\)" +set gdb_prompt "\\(gdbslet\\)" # @@ -38,7 +38,7 @@ set prompt "\\(gdbslet\\)" proc gdb_start { } { global gdb_spawn_id; - global prompt + global gdb_prompt global GDB if { [default_gdb_start] != 0 } { @@ -48,7 +48,7 @@ proc gdb_start { } { if [target_info exists baud] { send_gdb "set remotebaud [target_info baud]\n" expect { - -i $gdb_spawn_id -re ".*$prompt" { } + -i $gdb_spawn_id -re ".*$gdb_prompt" { } -i $gdb_spawn_id default { perror "Error setting baud rate." return -1; @@ -67,7 +67,7 @@ proc gdb_start { } { proc gdb_sparclet_startup { } { global gdb_spawn_id; - global prompt + global gdb_prompt global GDB set timeout 5; @@ -79,13 +79,13 @@ proc gdb_sparclet_startup { } { gdb_send "y\n"; exp_continue; } - -i $gdb_spawn_id -re "Remote target.*connected to.*$prompt" { } + -i $gdb_spawn_id -re "Remote target.*connected to.*$gdb_prompt" { } -i $gdb_spawn_id timeout { verbose "timed out, checking if stub is already running" set timeout 10 send_gdb "\003"; expect { - -i $gdb_spawn_id -re ".*$prompt" { + -i $gdb_spawn_id -re ".*$gdb_prompt" { } -i $gdb_spawn_id default { perror "sparclet board isn't responding"; @@ -94,7 +94,7 @@ proc gdb_sparclet_startup { } { } send_gdb "target remote [target_info gdb_serial]\n"; expect { - -i $gdb_spawn_id -re ".*Remote debugging.*$prompt" { + -i $gdb_spawn_id -re ".*Remote debugging.*$gdb_prompt" { verbose "stub is already running" set is_running_stub 1; } @@ -123,8 +123,8 @@ proc gdb_sparclet_startup { } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Reading symbols from.*done..*$prompt $" {} - -i $gdb_spawn_id -re "$prompt $" { perror "GDB couldn't find loader" } + -i $gdb_spawn_id -re "Reading symbols from.*done..*$gdb_prompt $" {} + -i $gdb_spawn_id -re "$gdb_prompt $" { perror "GDB couldn't find loader" } -i $gdb_spawn_id timeout { perror "(timeout) read symbol file" ; return -1 @@ -133,7 +133,7 @@ proc gdb_sparclet_startup { } { send_gdb "target [target_info gdb_protocol] [target_info serial]\n"; expect { - -i $gdb_spawn_id -re "Remote target.*connected to.*$prompt" { } + -i $gdb_spawn_id -re "Remote target.*connected to.*$gdb_prompt" { } -i $gdb_spawn_id default { perror "Error reconnecting to sparclet."; return -1; @@ -145,12 +145,12 @@ proc gdb_sparclet_startup { } { set timeout 1200 verbose "Timeout is now $timeout seconds" 2 expect { - -i $gdb_spawn_id -re "Loading.*$prompt $" { + -i $gdb_spawn_id -re "Loading.*$gdb_prompt $" { verbose "Loaded $loader into $GDB" 1 set timeout 60 verbose "Timeout is now $timeout seconds" 2 } - -i $gdb_spawn_id -re "$prompt $" { + -i $gdb_spawn_id -re "$gdb_prompt $" { if $verbose>1 then { perror "GDB couldn't load." } @@ -193,7 +193,7 @@ proc gdb_sparclet_startup { } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Running loader succeeded" } -i $gdb_spawn_id timeout { @@ -213,12 +213,12 @@ proc gdb_sparclet_startup { } { proc gdb_run_cmd { args } { global gdb_spawn_id - global prompt + global gdb_prompt gdb_breakpoint exit; send_gdb "set \$fp=0\n"; expect { - -i $gdb_spawn_id -re ".*$prompt" { } + -i $gdb_spawn_id -re ".*$gdb_prompt" { } } send_gdb "jump start\n"; expect { @@ -243,7 +243,7 @@ proc gdb_load { arg } { global verbose global loadpath global loadfile - global prompt + global gdb_prompt global GDB global expect_out global gdb_spawn_id @@ -267,8 +267,8 @@ proc gdb_load { arg } { send_gdb "y\n" exp_continue } - -i $gdb_spawn_id -re "Reading symbols from.*done..*$prompt $" {} - -i $gdb_spawn_id -re "$prompt $" { perror "GDB couldn't read file" } + -i $gdb_spawn_id -re "Reading symbols from.*done..*$gdb_prompt $" {} + -i $gdb_spawn_id -re "$gdb_prompt $" { perror "GDB couldn't read file" } -i $gdb_spawn_id timeout { perror "(timeout) read symbol file" ; return -1 @@ -282,7 +282,7 @@ proc gdb_load { arg } { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { + -i $gdb_spawn_id -re ".*$gdb_prompt $" { verbose "Set remote target to [target_info serial]" 2 } -i $gdb_spawn_id timeout { @@ -303,12 +303,12 @@ proc gdb_load { arg } { set timeout 1200 verbose "Timeout is now $timeout seconds" 2 expect { - -i $gdb_spawn_id -re "Loading.*$prompt $" { + -i $gdb_spawn_id -re "Loading.*$gdb_prompt $" { verbose "Loaded $arg into $GDB" 1 set timeout 60 verbose "Timeout is now $timeout seconds" 2 } - -i $gdb_spawn_id -re "$prompt $" { + -i $gdb_spawn_id -re "$gdb_prompt $" { if $verbose>1 then { perror "GDB couldn't load." } @@ -321,7 +321,7 @@ proc gdb_load { arg } { } send_gdb "list main\n"; expect { - -i $gdb_spawn_id -re ".*$prompt" { } + -i $gdb_spawn_id -re ".*$gdb_prompt" { } -i $gdb_spawn_id default { perror "command for list main never completed"; return -1; diff --git a/gdb/testsuite/config/udi.exp b/gdb/testsuite/config/udi.exp index 1d49722..4c5f242 100644 --- a/gdb/testsuite/config/udi.exp +++ b/gdb/testsuite/config/udi.exp @@ -27,7 +27,7 @@ load_lib gdb.exp # Set gdb to the desired UDI target # proc gdb_target_udi { } { - global prompt + global gdb_prompt global verbose global exit_status @@ -40,7 +40,7 @@ proc gdb_target_udi { } { -re "target udi $targetname\[\r\n\]+" { exp_continue } - -re "TIP UDI 1.2 Conformant.*$prompt $" { + -re "TIP UDI 1.2 Conformant.*$gdb_prompt $" { verbose "Set target to $targetname" } -re "TIP-ipc WARNING,.*failed:" { @@ -73,7 +73,7 @@ proc gdb_load { arg } { global loadpath global loadfile global GDB - global prompt + global gdb_prompt if [gdb_file_cmd $arg] { return -1 diff --git a/gdb/testsuite/config/vx.exp b/gdb/testsuite/config/vx.exp index c2b2632..daf826e 100644 --- a/gdb/testsuite/config/vx.exp +++ b/gdb/testsuite/config/vx.exp @@ -27,7 +27,7 @@ load_lib gdb.exp load_lib vxworks.exp set shell_prompt "->" -set prompt "\\(vxgdb\\)" +set gdb_prompt "\\(vxgdb\\)" # # gdb_version -- extract and print the version number of gcc @@ -57,7 +57,7 @@ proc gdb_load { arg } { # gdb_start -- start gdb running # proc gdb_start { } { - global prompt + global gdb_prompt global verbose global connectmode global reboot @@ -100,7 +100,7 @@ proc gdb_start { } { } proc spawn_vxgdb { } { - global prompt + global gdb_prompt global verbose default_gdb_start @@ -108,7 +108,7 @@ proc spawn_vxgdb { } { # set the default arguments to "main", so that "run" with no # arguments will work correctly. send "set args main\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} verbose "Setting up target, Please wait..." # set targets hostname @@ -116,7 +116,7 @@ proc spawn_vxgdb { } { set timeout 60 verbose "Timeout is now $timeout seconds" 2 expect { - -re "Done\..*$prompt $" { + -re "Done\..*$gdb_prompt $" { verbose "Set target to [target_info netport]" 1 } -re "net_connect: RPC: Program not registered.*$" { diff --git a/gdb/testsuite/gdb.base/a1-selftest.exp b/gdb/testsuite/gdb.base/a1-selftest.exp index 37a4267..35c86fb 100644 --- a/gdb/testsuite/gdb.base/a1-selftest.exp +++ b/gdb/testsuite/gdb.base/a1-selftest.exp @@ -46,7 +46,7 @@ if [istarget "m68k*-*-hpux*"] then { # to a line that we know is always executed. proc do_steps_and_nexts {} { - global prompt + global gdb_prompt global srcdir gdb_reinitialize_dir $srcdir/.. @@ -54,87 +54,87 @@ proc do_steps_and_nexts {} { for {set count 0} {$count < 20} {incr count} { send "list\n" expect { - -re ".*symarg = NULL.*$prompt $" { + -re ".*symarg = NULL.*$gdb_prompt $" { set description "step over symarg initialization" set command "step" } - -re ".*execarg = NULL.*$prompt $" { + -re ".*execarg = NULL.*$gdb_prompt $" { set description "step over execarg initialization" set command "step" } - -re ".*corearg = NULL.*$prompt $" { + -re ".*corearg = NULL.*$gdb_prompt $" { set description "step over corearg initialization" set command "step" } - -re ".*cdarg = NULL.*$prompt $" { + -re ".*cdarg = NULL.*$gdb_prompt $" { set description "step over cdarg initialization" set command "step" } - -re ".*ttyarg = NULL.*$prompt $" { + -re ".*ttyarg = NULL.*$gdb_prompt $" { set description "step over ttyarg initialization" set command "step" } - -re ".*time_at_startup = get_run_time.*$prompt $" { + -re ".*time_at_startup = get_run_time.*$gdb_prompt $" { set description "next over get_run_time and everything it calls" set command "next" } - -re ".*START_PROGRESS.*$prompt $" { + -re ".*START_PROGRESS.*$gdb_prompt $" { set description "next over START_PROGRESS and everything it calls" set command "next" } - -re ".*mac_init.*$prompt $" { + -re ".*mac_init.*$gdb_prompt $" { set description "next over mac_init and everything it calls" set command "next" } - -re ".*init_malloc.*$prompt $" { + -re ".*init_malloc.*$gdb_prompt $" { set description "next over init_malloc and everything it calls" set command "next" } - -re ".*count . 0x3.*$prompt $" { + -re ".*count . 0x3.*$gdb_prompt $" { set description "next over conditional stack alignment code 1" set command "next" } - -re ".*if .i != 0.*$prompt $" { + -re ".*if .i != 0.*$gdb_prompt $" { set description "next over conditional stack alignment code 2" set command "next" } - -re ".*alloca .i - 4.*$prompt $" { + -re ".*alloca .i - 4.*$gdb_prompt $" { set description "next over conditional stack alignment alloca" set command "next" } - -re ".*SET_TOP_LEVEL.*$prompt $" { + -re ".*SET_TOP_LEVEL.*$gdb_prompt $" { set description "next over SET_TOP_LEVEL call" set command "next" } - -re ".*cmdsize = 1.*$prompt $" { + -re ".*cmdsize = 1.*$gdb_prompt $" { set description "step over cmdsize initialization" set command "next" } - -re ".*cmdarg = .* xmalloc.*$prompt $" { + -re ".*cmdarg = .* xmalloc.*$gdb_prompt $" { set description "next over cmdarg initialization via xmalloc" set command "next" } - -re ".*ncmd = 0.*$prompt $" { + -re ".*ncmd = 0.*$gdb_prompt $" { set description "next over ncmd initialization" set command "next" } - -re ".*dirsize = 1.*$prompt $" { + -re ".*dirsize = 1.*$gdb_prompt $" { set description "next over dirsize initialization" set command "next" } - -re ".*dirarg = .* xmalloc.*$prompt $" { + -re ".*dirarg = .* xmalloc.*$gdb_prompt $" { return } - -re "\[ \t\]+\{\r\n$prompt $" { + -re "\[ \t\]+\{\r\n$gdb_prompt $" { setup_xfail "mips-*-irix5*" fail "$description ended up at odd location" } - -re ".*main.c.*No such file or directory.*$prompt $" { + -re ".*main.c.*No such file or directory.*$gdb_prompt $" { setup_xfail "rs6000-*-aix3*" fail "must be able to list source lines" return } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "unknown source line after $description" return } @@ -145,13 +145,13 @@ proc do_steps_and_nexts {} { } send "$command\n" expect { - -re ".*No such file or directory.\r\n$prompt $" { + -re ".*No such file or directory.\r\n$gdb_prompt $" { fail "$description (no source available)" } - -re ".*A file or directory .* does not exist..\r\n$prompt $" { + -re ".*A file or directory .* does not exist..\r\n$gdb_prompt $" { fail "$description (no source available)" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { pass "$description" } timeout { @@ -162,7 +162,7 @@ proc do_steps_and_nexts {} { } proc test_with_self { executable } { - global prompt + global gdb_prompt global tool global det_file global decimal @@ -221,19 +221,19 @@ proc test_with_self { executable } { set description "run until breakpoint at main" send "run -nw\n" expect { - -re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.* at .*main.c:.*$prompt $" { + -re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.* at .*main.c:.*$gdb_prompt $" { pass "$description" } - -re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.*$prompt $" { + -re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.*$gdb_prompt $" { xfail "$description (line numbers scrambled?)" } - -re "vfork: No more processes.*$prompt $" { + -re "vfork: No more processes.*$gdb_prompt $" { fail "$description (out of virtual memory)" set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 return -1 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "$description" set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 @@ -250,13 +250,13 @@ proc test_with_self { executable } { # do we have a version number ? send "print version\n" expect { - -re ".\[0-9\]+ = +0x.*\[0-9.\]+.*$prompt $" { + -re ".\[0-9\]+ = +0x.*\[0-9.\]+.*$gdb_prompt $" { pass "printed version" } - -re ".\[0-9\]+ = +.+ +0x.*\[0-9.\]+.*$prompt $" { + -re ".\[0-9\]+ = +.+ +0x.*\[0-9.\]+.*$gdb_prompt $" { pass "printed version with cast" } - -re ".*$prompt $" { fail "printed version" } + -re ".*$gdb_prompt $" { fail "printed version" } timeout { fail "(timeout) printed version" } } @@ -273,16 +273,16 @@ proc test_with_self { executable } { set description "step into xmalloc call" send "step\n" expect { - -re "xmalloc.*size=.*at.*utils.c.*$prompt $" { + -re "xmalloc.*size=.*at.*utils.c.*$gdb_prompt $" { pass "$description" } - -re ".*No such file or directory.\r\n$prompt $" { + -re ".*No such file or directory.\r\n$gdb_prompt $" { pass "$description (no source available)" } - -re "A file or directory .* does not exist..\r\n$prompt $" { + -re "A file or directory .* does not exist..\r\n$gdb_prompt $" { pass "$description (no source available)" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "$description" } timeout { @@ -299,14 +299,14 @@ GDB is free software, covered by the GNU General Public License, and you are.* welcome to change it and/or distribute copies of it under certain conditions.* Type \"show copying\" to see the conditions.* There is absolutely no warranty for GDB. Type \"show warranty\" for details.* -This GDB was configured as .*$prompt $"\ +This GDB was configured as .*$gdb_prompt $"\ { pass "xgdb is at prompt" } -re "GDB is free software and you are welcome to distribute copies of it.* under certain conditions; type \"show copying\" to see the conditions..* There is absolutely no warranty for GDB; type \"show warranty\" for details..* -GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$prompt $"\ +GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$gdb_prompt $"\ { pass "xgdb is at prompt (obsolescent gdb)" } - -re ".*$prompt $" { fail "xgdb is at prompt" } + -re ".*$gdb_prompt $" { fail "xgdb is at prompt" } timeout { fail "(timeout) xgdb is at prompt" } } @@ -314,7 +314,7 @@ GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$prompt $"\ send "set prompt (xgdb) \n" expect { -re "\[(\]xgdb\[)\].*\[(\]xgdb\[)\] $" { pass "Set xgdb prompt" } - -re ".*$prompt $" { fail "Set xgdb prompt" } + -re ".*$gdb_prompt $" { fail "Set xgdb prompt" } default { fail "(timeout) Set xgdb prompt" } } @@ -322,10 +322,10 @@ GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$prompt $"\ set description "send ^C to child process" send "\003" expect { - -re "Program received signal SIGINT.*$prompt $" { + -re "Program received signal SIGINT.*$gdb_prompt $" { pass "$description" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "$description" } timeout { @@ -336,10 +336,10 @@ GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$prompt $"\ set description "send SIGINT signal to child process" send "signal SIGINT\n" expect { - -re "Continuing with signal SIGINT.*$prompt $" { + -re "Continuing with signal SIGINT.*$gdb_prompt $" { pass "$description" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "$description" } timeout { @@ -356,10 +356,10 @@ GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$prompt $"\ set description "backtrace through signal handler" send "backtrace\n" expect { - -re "#0.*read.*in main \\(.*\\) at .*main\\.c.*$prompt $" { + -re "#0.*read.*in main \\(.*\\) at .*main\\.c.*$gdb_prompt $" { pass "$description" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { # On the alpha, we hit the infamous problem about gdb # being unable to get the frame pointer (mentioned in # gdb/README). As it is intermittent, there is no way to diff --git a/gdb/testsuite/gdb.base/a2-run.exp b/gdb/testsuite/gdb.base/a2-run.exp index 89f2c7d..57c7a82 100644 --- a/gdb/testsuite/gdb.base/a2-run.exp +++ b/gdb/testsuite/gdb.base/a2-run.exp @@ -74,13 +74,13 @@ if [istarget "*-*-vxworks*"] then { } set timeout 10 verbose "Timeout is now $timeout seconds" 2 - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { expect { - -re ".*usage: factorial <number>.*Program exited with code 01.*$prompt $" { + -re ".*usage: factorial <number>.*Program exited with code 01.*$gdb_prompt $" { pass "run \"$testfile\" with no args" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run \"$testfile\" with no args" verbose "expect_out is $expect_out(buffer)" 2 } @@ -108,14 +108,14 @@ if [istarget "*-*-vxworks*"] then { } set timeout 10 verbose "Timeout is now $timeout seconds" 2 - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { setup_xfail "mips-idt-*" gdb_run_cmd 5 expect { - -re ".*120.*$prompt $"\ + -re ".*120.*$gdb_prompt $"\ { pass "run \"$testfile\" with arg" } - -re ".*$prompt $" { fail "run \"$testfile\" with arg" } + -re ".*$gdb_prompt $" { fail "run \"$testfile\" with arg" } timeout { fail "(timeout) run \"$testfile\" with arg" } } } @@ -136,12 +136,12 @@ if [istarget "*-*-vxworks*"] then { } set timeout 10 verbose "Timeout is now $timeout seconds" 2 - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { expect { - -re ".*120.*$prompt $"\ + -re ".*120.*$gdb_prompt $"\ { pass "run \"$testfile\" again with same args" } - -re ".*$prompt $" { fail "run \"$testfile\" again with same args" } + -re ".*$gdb_prompt $" { fail "run \"$testfile\" again with same args" } timeout { fail "(timeout) run \"$testfile\" again with same args" } } } @@ -152,7 +152,7 @@ if [istarget "*-*-vxworks*"] then { } else { send_gdb "set args\n" } -expect -re "$prompt $" +expect -re "$gdb_prompt $" gdb_run_cmd @@ -172,13 +172,13 @@ if [istarget "*-*-vxworks*"] then { } set timeout 10 verbose "Timeout is now $timeout seconds" 2 - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { expect { - -re ".*usage: factorial <number>.*$prompt $" { + -re ".*usage: factorial <number>.*$gdb_prompt $" { pass "run after setting args to nil" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run after setting args to nil" } timeout { @@ -194,7 +194,7 @@ if [istarget "*-*-vxworks*"] then { } else { send_gdb "set args 6\n" } -expect -re "$prompt $" +expect -re "$gdb_prompt $" gdb_run_cmd if [istarget "*-*-vxworks*"] then { @@ -213,13 +213,13 @@ if [istarget "*-*-vxworks*"] then { } set timeout 10 verbose "Timeout is now $timeout seconds" 2 - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { expect { - -re ".*720.*$prompt $" { + -re ".*720.*$gdb_prompt $" { pass "run \"$testfile\" again after setting args" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run \"$testfile\" again after setting args" } timeout { @@ -233,10 +233,10 @@ if [istarget "*-*-vxworks*"] then { if [isnative] then { send_gdb "run `echo 8`\n" expect { - -re "Starting program.*40320.*$prompt $" { + -re "Starting program.*40320.*$gdb_prompt $" { pass "run \"$testfile\" with shell" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run \"$testfile\" with shell" } timeout { @@ -248,5 +248,5 @@ if [isnative] then { # Reset the default arguments for VxWorks if [istarget "*-*-vxworks*"] then { send_gdb "set args main\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} } diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp index 2c6b11f..a027b2f 100644 --- a/gdb/testsuite/gdb.base/break.exp +++ b/gdb/testsuite/gdb.base/break.exp @@ -61,14 +61,14 @@ expect { -i $gdb_spawn_id -re "Delete all breakpoints.*$" { send_gdb "y\n" expect { - -re "$prompt $" { + -re "$gdb_prompt $" { setup_xfail "i*86-*-sysv4*" "sparc-sun-sunos4*" "alpha-dec-osf*" "mips-dec-ultrix*" fail "Delete all breakpoints when none (unexpected prompt)" } timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" } } } - -i $gdb_spawn_id -re ".*$prompt $" { pass "Delete all breakpoints when none" } + -i $gdb_spawn_id -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" } timeout { fail "Delete all breakpoints when none (timeout)" } } @@ -151,9 +151,9 @@ if ![target_info exists use_gdb_stub] { send_gdb "y\n" exp_continue } - -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:60.*60\[\t \]+if .argc.* \{.*$prompt $"\ + -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:60.*60\[\t \]+if .argc.* \{.*$gdb_prompt $"\ { pass "run until function breakpoint" } - -re ".*$prompt $" { fail "run until function breakpoint" } + -re ".*$gdb_prompt $" { fail "run until function breakpoint" } timeout { fail "run until function breakpoint (timeout)" } } } else { @@ -204,8 +204,8 @@ gdb_test "tbreak $srcfile:factorial" "Breakpoint.*at.* file .*$srcfile, line.*" # send_gdb "tbreak 64\n" expect { - -re "Breakpoint.*at.* file .*$srcfile, line 64.*$prompt $" { pass "Temporary breakpoint line number" } - -re ".*$prompt $" { pass "Temporary breakpoint line number" } + -re "Breakpoint.*at.* file .*$srcfile, line 64.*$gdb_prompt $" { pass "Temporary breakpoint line number" } + -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number" } timeout { fail "breakpoint line number (timeout)" } } @@ -216,8 +216,8 @@ gdb_test "tbreak 60" "Breakpoint.*at.* file .*$srcfile, line 60.*" "Temporary br # send_gdb "tbreak $srcfile:70\n" expect { - -re "Breakpoint.*at.* file .*$srcfile, line 70.*$prompt $" { pass "Temporary breakpoint line number in file" } - -re ".*$prompt $" { pass "Temporary breakpoint line number in file" } + -re "Breakpoint.*at.* file .*$srcfile, line 70.*$gdb_prompt $" { pass "Temporary breakpoint line number in file" } + -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number in file" } timeout { fail "Temporary breakpoint line number in file (timeout)" } } @@ -242,7 +242,7 @@ proc test_clear_command {} { # proc test_next_with_recursion {} { - global prompt + global gdb_prompt global decimal global noresults global binfile @@ -272,7 +272,7 @@ proc test_next_with_recursion {} { gdb_run_cmd } expect { - -re "Break.* factorial .value=6. .*$prompt $" {} + -re "Break.* factorial .value=6. .*$gdb_prompt $" {} timeout { fail "run to factorial(6) (timeout)" ; return } } @@ -280,7 +280,7 @@ proc test_next_with_recursion {} { send_gdb "continue\n" expect { - -re "Continuing.*Break.* factorial .value=5. .*$prompt $" {} + -re "Continuing.*Break.* factorial .value=5. .*$gdb_prompt $" {} timeout { fail "continue to factorial(5) (timeout)" ; return } } @@ -296,7 +296,7 @@ proc test_next_with_recursion {} { send_gdb "next\n" expect { - -re ".* factorial .value - 1.;.*$prompt $" {} + -re ".* factorial .value - 1.;.*$gdb_prompt $" {} timeout { fail "next to recursive call (timeout)" ; return } } @@ -341,5 +341,5 @@ if [istarget "*-*-vxworks*"] { set timeout 10 verbose "Timeout is now $timeout seconds" 2 send_gdb "set args main\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} } diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp index 1f0ca64..71286e4 100644 --- a/gdb/testsuite/gdb.base/callfuncs.exp +++ b/gdb/testsuite/gdb.base/callfuncs.exp @@ -60,21 +60,21 @@ if [target_info exists gdb,cannot_call_functions] { # fails, then we skip the other tests. proc set_lang_c {} { - global prompt + global gdb_prompt send_gdb "set language c\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language c (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"c\".*$prompt $" { + -re ".* source language is \"c\".*$gdb_prompt $" { pass "set language to \"c\"" return 1 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"c\"" return 0 } diff --git a/gdb/testsuite/gdb.base/crossload.exp b/gdb/testsuite/gdb.base/crossload.exp index 0683cf9..020e238 100644 --- a/gdb/testsuite/gdb.base/crossload.exp +++ b/gdb/testsuite/gdb.base/crossload.exp @@ -65,7 +65,7 @@ if [istarget "a29k-*-*"] then { proc bfddefault {} { global GDB global GDBFLAGS - global prompt + global gdb_prompt global objdir global subdir global binfile @@ -80,21 +80,21 @@ proc bfddefault {} { send_gdb "y\n" exp_continue } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$prompt $" { + -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" { pass "$binfile ($bfdformat) auto format" } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+.no debugging symbols found.\[.\]+done\..*$prompt $" { + -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+.no debugging symbols found.\[.\]+done\..*$gdb_prompt $" { pass "$binfile ($bfdformat) auto format (but no symbols found)" } - -re "File format not recognized.*$prompt $" { + -re "File format not recognized.*$gdb_prompt $" { fail "$binfile ($bfdformat) auto format (format not recognized)" return } - -re "File format is ambiguous.*$prompt $" { + -re "File format is ambiguous.*$gdb_prompt $" { fail "$binfile ($bfdformat) auto format (format is ambiguous)" return } - -re "$prompt $" { + -re "$gdb_prompt $" { fail "$binfile ($bfdformat) auto format" return } @@ -117,7 +117,7 @@ proc bfddefault {} { proc bfdexplicit {} { global GDB global GDBFLAGS - global prompt + global gdb_prompt global subdir global objdir global det_file @@ -141,14 +141,14 @@ proc bfdexplicit {} { send_gdb "y\n" exp_continue } - -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$prompt $" { + -re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" { pass "$binfile ($bfdformat) explicit format" } - -re "Invalid target.*$prompt $" { + -re "Invalid target.*$gdb_prompt $" { fail "$binfile ($bfdformat) explicit format (invalid target)" return } - -re "$prompt $" { + -re "$gdb_prompt $" { fail "$binfile ($bfdformat) explicit format" return } @@ -162,13 +162,13 @@ proc bfdexplicit {} { } proc test_ptype_functions {} { - global prompt + global gdb_prompt global binfile global bfdformat global det_file send_gdb "ptype main\n" expect { - -re "type = int \[)(\]+\r\n$prompt $" {} + -re "type = int \[)(\]+\r\n$gdb_prompt $" {} timeout { fail "(timeout) $binfile ($bfdformat) function main" ; return } } @@ -192,7 +192,7 @@ proc test_ptype_functions {} { # Note that plain chars can be either signed or unsigned. proc test_ptype_plain_types {} { - global prompt + global gdb_prompt global binfile global bfdformat @@ -217,7 +217,7 @@ proc test_ptype_plain_types {} { # defined away and the variables default to plain types. So accept either. proc test_ptype_signed_types {} { - global prompt + global gdb_prompt global binfile global bfdformat global det_file @@ -241,7 +241,7 @@ proc test_ptype_signed_types {} { } proc test_ptype_unsigned_types {} { - global prompt + global gdb_prompt global binfile global bfdformat global det_file @@ -266,7 +266,7 @@ proc test_ptype_unsigned_types {} { # Note that plain chars can be either signed or unsigned. proc test_ptype_array_types {} { - global prompt + global gdb_prompt global binfile global bfdformat global det_file @@ -290,7 +290,7 @@ proc test_ptype_array_types {} { } proc test_ptype_pointer_types {} { - global prompt + global gdb_prompt global binfile global bfdformat global det_file @@ -316,7 +316,7 @@ proc loadandtest { args } { global verbose global GDB global GDBFLAGS - global prompt + global gdb_prompt global subdir global objdir global binfile diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index f82849e..835c506 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -16,17 +16,17 @@ gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "a setup_xfail "mips-idt-*" send_gdb "attach\n" expect { - -re "Argument required .(process-id|program) to attach.*$prompt $"\ + -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ { pass "attach" } - -re "You can't do that when your target is `None'.*$prompt $"\ + -re "You can't do that when your target is `None'.*$gdb_prompt $"\ { pass "attach" } - -re "Don't know how to attach. Try \"help target\"..*$prompt $"\ + -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ { pass "attach" } -re "Kill it. .y or n." { send_gdb "y\n" exp_continue } - -re "$prompt $" { fail "attach" } + -re "$gdb_prompt $" { fail "attach" } timeout { fail "(timeout) attach" } } @@ -103,7 +103,7 @@ expect { -re "Delete all auto-display expressions.*y or n. $" { send_gdb "y\n" expect { - -re "$prompt $" { pass "delete display prompt" } + -re "$gdb_prompt $" { pass "delete display prompt" } timeout { fail "(timeout) delete display prompt" } } } @@ -132,7 +132,7 @@ expect { -re "Reinitialize source path to empty.*y or n. $" { send_gdb "y\n" expect { - -re "Source directories searched: .cdir:.cwd.*$prompt $"\ + -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\ { pass "directory prompt" } timeout { fail "(timeout) directory prompt" } } @@ -180,7 +180,7 @@ gdb_test "enable" "" "enable" #test exec-file send_gdb "exec-file\n" expect { - -re "No exec file now..*$prompt $" { + -re "No exec file now..*$gdb_prompt $" { pass "exec-file" } -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" { @@ -188,10 +188,10 @@ expect { if $verbose>1 then { send_user "\tDidn't kill program being debugged\n" } - expect -re "$prompt $" { } + expect -re "$gdb_prompt $" { } pass "exec-file" } - -re "$prompt $" { fail "exec-file" } + -re "$gdb_prompt $" { fail "exec-file" } timeout { fail "(timeout) exec-file" } } @@ -208,17 +208,17 @@ gdb_test "fg" "The program is not being run." "fg" #test file send_gdb "file\n" expect { - -re "No exec file now..*$prompt $"\ + -re "No exec file now..*$gdb_prompt $"\ { pass "file" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } - expect -re "$prompt $" { } + expect -re "$gdb_prompt $" { } pass "file" } - -re ".*$prompt $" { fail "file" } + -re ".*$gdb_prompt $" { fail "file" } timeout { fail "(timeout) file" } } @@ -351,31 +351,31 @@ gdb_test "pwd" "Working directory .*" "pwd" #test run "r" abbreviation if [istarget "*-*-vxworks*"] then { send_gdb "set args\n" - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} gdb_test "r" "Starting program: .* You must specify a function name to run, and arguments if any"\ "run \"r\" abbreviation" send_gdb "set args main\n" - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { send_gdb "r\n" expect { -re "Starting program: .* -You can't do that when your target is `None'.*$prompt $"\ +You can't do that when your target is `None'.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* No executable file specified.* -Use the \"file\" or \"exec-file\" command.*$prompt $"\ +Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* -No image loaded into target.*$prompt $"\ +No image loaded into target.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* -No program loaded.*$prompt $"\ +No program loaded.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } - -re "Don't know how to run. Try \"help target\"..*$prompt $"\ + -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } - -re ".*$prompt $" { fail "run \"r\" abbreviation" } + -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" } timeout { fail "(timeout) run \"r\" abbreviation" } } } @@ -383,28 +383,28 @@ No program loaded.*$prompt $"\ #test run if [istarget "*-*-vxworks*"] then { send_gdb "set args\n" - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} gdb_test "run" "Starting program: .* You must specify a function name to run, and arguments if any" send_gdb "set args main\n" - expect -re "$prompt $" {} + expect -re "$gdb_prompt $" {} } else { send_gdb "run\n" expect { - -re "Starting program:.*You can't do that when your target is `None'.*$prompt $" { pass "run" } + -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" } -re "Starting program: .* No executable file specified.* -Use the \"file\" or \"exec-file\" command.*$prompt $"\ +Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ { pass "run" } -re "Starting program: .* -No image loaded into target.*$prompt $"\ +No image loaded into target.*$gdb_prompt $"\ { pass "run" } -re "Starting program: .* -No program loaded.*$prompt $"\ +No program loaded.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } - -re "Don't know how to run. Try \"help target\"..*$prompt $"\ + -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ { pass "run" } - -re ".*$prompt $" { fail "run" } + -re ".*$gdb_prompt $" { fail "run" } timeout { fail "(timeout) run" } } } @@ -417,13 +417,13 @@ gdb_test "rbreak" "" "rbreak" # an initial stack to be created. send_gdb "return\n" expect { - -re "No selected frame..*$prompt $"\ + -re "No selected frame..*$gdb_prompt $"\ { pass "return" } -re "Make .* return now.*y or n. $" { send_gdb "y\n" exp_continue } - -re ".*$prompt $" { fail "return" } + -re ".*$gdb_prompt $" { fail "return" } timeout { fail "(timeout) return" } } @@ -594,10 +594,10 @@ gdb_test "show print union" "Printing of unions interior to structures is on." " #test show print vtbl gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl" #test show prompt -# In the FAIL case, can't just look for $prompt because that will match -# the output, rather than the prompt. So look for $prompt at the start +# In the FAIL case, can't just look for $gdb_prompt because that will match +# the output, rather than the prompt. So look for $gdb_prompt at the start # of a line. -gdb_test "show prompt" "Gdb's prompt is \"$prompt \".*" "show prompt" +gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt" #test show radix gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix" #test show symbol-reloading @@ -647,34 +647,34 @@ gdb_test "target procfs" "Use the \"run\" command to start a Unix child process. #test target core send_gdb "target core\n" expect { - -re "No core file specified..*$prompt $" { pass "target core" } + -re "No core file specified..*$gdb_prompt $" { pass "target core" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } - expect -re "$prompt $" { } + expect -re "$gdb_prompt $" { } pass "target core" } - -re "Undefined target command: \"core\". Try \"help target\"..*$prompt $" { pass "target core" } - -re ".*$prompt $" { fail "target core" } + -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" } + -re ".*$gdb_prompt $" { fail "target core" } timeout { fail "(timeout) target core" } } #test target exec send_gdb "target exec\n" expect { - -re "No exec file now..*$prompt $"\ + -re "No exec file now..*$gdb_prompt $"\ { pass "target exec" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } - expect -re "$prompt $" { } + expect -re "$gdb_prompt $" { } pass "target exec" } - -re ".*$prompt $" { fail "target exec" } + -re ".*$gdb_prompt $" { fail "target exec" } timeout { fail "(timeout) target exec" } } @@ -683,17 +683,17 @@ if ![istarget "*-*-udi*"] then { send_gdb "target remote\n" expect { -re "To open a remote debug connection, you need to specify what serial.* -device is attached to the remote system .e.g. /dev/ttya.*$prompt $"\ +device is attached to the remote system .e.g. /dev/ttya.*$gdb_prompt $"\ { pass "target remote" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } - expect -re "$prompt $" { } + expect -re "$gdb_prompt $" { } pass "target remote" } - -re ".*$prompt $" { fail "target remote" } + -re ".*$gdb_prompt $" { fail "target remote" } timeout { fail "(timeout) target remote" } } } @@ -717,7 +717,7 @@ expect { -re "Delete all auto-display expressions.*y or n. $" { send_gdb "y\n" expect { - -re "$prompt $" { pass "undisplay prompt" } + -re "$gdb_prompt $" { pass "undisplay prompt" } timeout { fail "(timeout) (timeout) undisplay prompt" } } } @@ -730,7 +730,7 @@ expect { -re "Delete all environment variables?.*y or n. $" { send_gdb "y\n" expect { - -re "$prompt $" { pass "unset environmentprompt" } + -re "$gdb_prompt $" { pass "unset environmentprompt" } timeout { fail "(timeout) (timeout) unset environment prompt" } diff --git a/gdb/testsuite/gdb.base/help.exp b/gdb/testsuite/gdb.base/help.exp index 2049058..2105367 100644 --- a/gdb/testsuite/gdb.base/help.exp +++ b/gdb/testsuite/gdb.base/help.exp @@ -282,7 +282,7 @@ gdb_test "help section" "Change the base address of section SECTION of the exec #test help set annotate gdb_test "help set annotate" "Set annotation_level.*\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help set annotate" # test help set args -gdb_test "help set args" "Set arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." -re "Set arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program..*$prompt $" +gdb_test "help set args" "Set arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." -re "Set arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program..*$gdb_prompt $" gdb_test "help set args" # test help set check "c" abbreviation gdb_test "help set c" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check \"c\" abbreviation" @@ -374,7 +374,7 @@ gdb_test "help shell" "Execute the rest of the line as a shell command. .*\[\r\ #test help show annotate gdb_test "help show annotate" "Show annotation_level.*\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help show annotate" # test help show args -gdb_test "help show args" "Show arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." -re "Show arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program..*$prompt $" +gdb_test "help show args" "Show arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." -re "Show arguments to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program..*$gdb_prompt $" gdb_test "help show args" # test help show check "c" abbreviation gdb_test "help show c" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check \"c\" abbreviation" diff --git a/gdb/testsuite/gdb.base/interrupt.exp b/gdb/testsuite/gdb.base/interrupt.exp index aa9cc2e..2985870 100644 --- a/gdb/testsuite/gdb.base/interrupt.exp +++ b/gdb/testsuite/gdb.base/interrupt.exp @@ -82,23 +82,23 @@ if ![file exists $binfile] then { send_gdb "\003" expect { - -re "Program received signal SIGINT.*$prompt $" { + -re "Program received signal SIGINT.*$gdb_prompt $" { pass "send_gdb control C" } - -re ".*$prompt $" { fail "send_gdb control C" } + -re ".*$gdb_prompt $" { fail "send_gdb control C" } timeout { fail "send_gdb control C (timeout)" } eof { fail "send_gdb control C (eof)" } } send_gdb "p func1 ()\n" expect { - -re " = 4.*$prompt $" { pass "call function when asleep" } - -re ".*Program received signal SIGSEGV.*$prompt $" { + -re " = 4.*$gdb_prompt $" { pass "call function when asleep" } + -re ".*Program received signal SIGSEGV.*$gdb_prompt $" { setup_xfail "i*86-pc-linux*-gnu" fail "child died when we called func1, skipped rest of tests" return } - -re "$prompt $" { fail "call function when asleep (wrong output)" } + -re "$gdb_prompt $" { fail "call function when asleep (wrong output)" } default { # This fail probably happens whenever we use /proc (we @@ -137,7 +137,7 @@ if ![file exists $binfile] then { expect { -re "^continue\r\nContinuing.\r\n(\r\n|)$" { pass "continue" } -re "^continue\r\n\r\n" { fail "continue (missing Continuing.)" } - -re "$prompt $" { fail "continue" } + -re "$gdb_prompt $" { fail "continue" } timeout { fail "continue (timeout)" } eof { fail "continue (eof)" } } @@ -155,10 +155,10 @@ if ![file exists $binfile] then { setup_xfail "i*86-pc-linux*-gnu" send_gdb "\004" expect { - -re "end of file.*Program exited normally.*$prompt $" { + -re "end of file.*Program exited normally.*$gdb_prompt $" { pass "send_gdb end of file" } - -re "$prompt $" { fail "send end of file" } + -re "$gdb_prompt $" { fail "send end of file" } timeout { fail "send end of file (timeout)" } eof { fail "send end of file (eof)" } } diff --git a/gdb/testsuite/gdb.base/list.exp b/gdb/testsuite/gdb.base/list.exp index e0cf2c2..f718c99 100644 --- a/gdb/testsuite/gdb.base/list.exp +++ b/gdb/testsuite/gdb.base/list.exp @@ -49,7 +49,7 @@ if [get_compiler_info ${binfile}] { # proc set_listsize { arg } { - global prompt + global gdb_prompt if [gdb_test "set listsize $arg" "" "setting listsize to $arg"] { return 0; @@ -69,7 +69,7 @@ proc set_listsize { arg } { # proc test_listsize {} { - global prompt + global gdb_prompt # Show default size @@ -146,7 +146,7 @@ proc test_listsize {} { # proc test_list_include_file {} { - global prompt + global gdb_prompt # FIXME Fails for COFF as well, I think. setup_xfail "a29k-*-udi" @@ -162,40 +162,40 @@ proc test_list_include_file {} { # proc test_list_filename_and_number {} { - global prompt + global gdb_prompt set testcnt 0 send_gdb "list list0.c:1\n" expect { - -re "1\[ \t\]+#include \"list0.h\".*5\[ \t\]+int x;\r\n$prompt $" { + -re "1\[ \t\]+#include \"list0.h\".*5\[ \t\]+int x;\r\n$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list0.c:1" ; return } + -re ".*$gdb_prompt $" { fail "list list0.c:1" ; return } timeout { fail "list list0.c:1 (timeout)" ; return } } send_gdb "list list0.c:10\n" expect { - -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$prompt $" { + -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list.c:10" ; return } + -re ".*$gdb_prompt $" { fail "list list.c:10" ; return } timeout { fail "list list.c:10 (timeout)" ; return } } send_gdb "list list1.c:1\n" expect { - -re "1\[ \t\]+void.*5\[ \t\]+printf \[(\]+.*\[)\]+;\r\n$prompt $" { + -re "1\[ \t\]+void.*5\[ \t\]+printf \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list1.c:1" ; return } + -re ".*$gdb_prompt $" { fail "list list1.c:1" ; return } timeout { fail "list list1.c:1 (timeout)" ; return } } send_gdb "list list1.c:12\n" expect { - -re "7\[ \t\]+long_line \[(\]+.*\[)\]+;.*14\[ \t\]+\}\r\n.*$prompt $" { + -re "7\[ \t\]+long_line \[(\]+.*\[)\]+;.*14\[ \t\]+\}\r\n.*$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list1.c:12" ; return } + -re ".*$gdb_prompt $" { fail "list list1.c:12" ; return } timeout { fail "list list1.c:12 (timeout)" ; return } } pass "list filename:number ($testcnt tests)" @@ -206,7 +206,7 @@ proc test_list_filename_and_number {} { # proc test_list_function {} { - global prompt + global gdb_prompt global gcc_compiled # gcc appears to generate incorrect debugging information for code @@ -227,35 +227,35 @@ proc test_list_function {} { } proc test_list_forward {} { - global prompt + global gdb_prompt set testcnt 0 send_gdb "list list0.c:10\n" expect { - -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list0.c:10" ; return } + -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list list0.c:10" ; return } timeout { fail "list list0.c:10 (timeout)" ; return } } send_gdb "list\n" expect { - -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 15-24" ; return } + -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 15-24" ; return } timeout { fail "list 15-24 (timeout)" ; return } } send_gdb "list\n" expect { - -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 25-34" ; return } + -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 25-34" ; return } timeout { fail "list 25-34 (timeout)" ; return } } send_gdb "list\n" expect { - -re "35\[ \t\]+foo \[(\]+.*\[)\]+;.*42\[ \t\]+\}\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 35-42" ; return } + -re "35\[ \t\]+foo \[(\]+.*\[)\]+;.*42\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 35-42" ; return } timeout { fail "list 35-42 (timeout)" ; return } } @@ -263,35 +263,35 @@ proc test_list_forward {} { } proc test_list_backwards {} { - global prompt + global gdb_prompt set testcnt 0 send_gdb "list list0.c:33\n" expect { - -re "28\[ \t\]+foo \[(\]+.*\[)\]+;.*37\[ \t\]+\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list0.c:33" ; return } + -re "28\[ \t\]+foo \[(\]+.*\[)\]+;.*37\[ \t\]+\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list list0.c:33" ; return } timeout { fail "list list0.c:33 (timeout)" ; return } } send_gdb "list -\n" expect { - -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 18-27" ; return } + -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 18-27" ; return } timeout { fail "list 18-27 (timeout)" ; return } } send_gdb "list -\n" expect { - -re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 8-17" ; return } + -re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 8-17" ; return } timeout { fail "list 8-17 (timeout)" ; return } } send_gdb "list -\n" expect { - -re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list 1-7" ; return } + -re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt } + -re ".*$gdb_prompt $" { fail "list 1-7" ; return } timeout { fail "list 1-7 (timeout)" ; return } } @@ -303,7 +303,7 @@ proc test_list_backwards {} { # proc test_list_range {} { - global prompt + global gdb_prompt gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2" @@ -325,7 +325,7 @@ proc test_list_range {} { # proc test_list_filename_and_function {} { - global prompt + global gdb_prompt set testcnt 0 @@ -335,13 +335,13 @@ proc test_list_filename_and_function {} { setup_xfail "a29k-*-udi" send_gdb "list list0.c:main\n" expect { - -re "1\[ \t\]+#include .*8\[ \t\]+breakpoint\[(\]\[)\]+;\r\n$prompt $" { + -re "1\[ \t\]+#include .*8\[ \t\]+breakpoint\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$prompt $" { + -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { pass "list function in source file 1" } - -re ".*$prompt $" { fail "list list0.c:main" } + -re ".*$gdb_prompt $" { fail "list list0.c:main" } timeout { fail "list list0.c:main (timeout)" } } @@ -352,13 +352,13 @@ proc test_list_filename_and_function {} { setup_xfail "rs6000-*-aix*" send_gdb "list list0.c:unused\n" expect { - -re "36\[ \t\]+\}.*42\[ \t\]+\}\r\n$prompt $" { + -re "36\[ \t\]+\}.*42\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } - -re "37.*42\[ \t\]+\}\r\n$prompt $" { + -re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list0.c:unused" } + -re ".*$gdb_prompt $" { fail "list list0.c:unused" } timeout { fail "list list0.c:unused (timeout)" } } clear_xfail "rs6000-*-aix*" @@ -373,19 +373,19 @@ proc test_list_filename_and_function {} { setup_xfail "a29k-*-udi" send_gdb "list list0.h:foo\n" expect { - -re "2\[ \t\]+including file. This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$prompt $" { + -re "2\[ \t\]+including file. This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$prompt $" { + -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$prompt $" { + -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } - -re "No source file named list0.h.\r\n$prompt $" { + -re "No source file named list0.h.\r\n$gdb_prompt $" { fail "list list0.h:foo" } - -re ".*$prompt $" { fail "list list0.h:foo" } + -re ".*$gdb_prompt $" { fail "list list0.h:foo" } timeout { fail "list list0.h:foo (timeout)" } } @@ -393,16 +393,16 @@ proc test_list_filename_and_function {} { # a29k-amd-udi is the third case. send_gdb "list list1.c:bar\n" expect { - -re "1\[ \t\]+void.*8\[ \t\]+\}\r\n$prompt $" { + -re "1\[ \t\]+void.*8\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } - -re "1\[ \t\]+void.*7\[ \t\]*long_line ..;\r\n$prompt $" { + -re "1\[ \t\]+void.*7\[ \t\]*long_line ..;\r\n$gdb_prompt $" { incr testcnt } - -re "1\[ \t\]+void.*9\[ \t\]*\r\n$prompt $" { + -re "1\[ \t\]+void.*9\[ \t\]*\r\n$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list1.c:bar" } + -re ".*$gdb_prompt $" { fail "list list1.c:bar" } timeout { fail "list list1.c:bar (timeout)" } } @@ -413,13 +413,13 @@ proc test_list_filename_and_function {} { setup_xfail "rs6000-*-aix*" send_gdb "list list1.c:unused\n" expect { - -re "7\[ \t\]+long_line \[(\]\[)\];.*14\[ \t\]+\}\r\n.*$prompt $" { + -re "7\[ \t\]+long_line \[(\]\[)\];.*14\[ \t\]+\}\r\n.*$gdb_prompt $" { incr testcnt } - -re "9.*14\[ \t\]+\}\r\n.*$prompt $" { + -re "9.*14\[ \t\]+\}\r\n.*$gdb_prompt $" { incr testcnt } - -re ".*$prompt $" { fail "list list1.c:unused" } + -re ".*$gdb_prompt $" { fail "list list1.c:unused" } timeout { fail "list list1.c:unused (timeout)" } } clear_xfail "rs6000-*-aix*" @@ -481,8 +481,8 @@ if [target_info exists use_gdb_stubs] { send_gdb "step\n" # if use stubs step out of the breakpoint() function. expect { - -re "main.* at .*$prompt $" {} - -re ".*in .*start.*$prompt $" {} + -re "main.* at .*$gdb_prompt $" {} + -re ".*in .*start.*$gdb_prompt $" {} timeout { fail "single step at breakpoint() (timeout)" ; return 0 } } } diff --git a/gdb/testsuite/gdb.base/printcmds.exp b/gdb/testsuite/gdb.base/printcmds.exp index b13fd79..024b5e8 100644 --- a/gdb/testsuite/gdb.base/printcmds.exp +++ b/gdb/testsuite/gdb.base/printcmds.exp @@ -38,7 +38,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb # fails, then we skip the other tests. proc set_lang_c {} { - global prompt + global gdb_prompt if [gdb_test "set language c" "" "set language c"] { return 0 @@ -51,7 +51,7 @@ proc set_lang_c {} { } proc test_integer_literals_accepted {} { - global prompt + global gdb_prompt # Test various decimal values. @@ -79,7 +79,7 @@ proc test_integer_literals_accepted {} { } proc test_character_literals_accepted {} { - global prompt + global gdb_prompt gdb_test "p 'a'" " = 97 'a'" gdb_test "p/c 'a'" " = 97 'a'" @@ -95,7 +95,7 @@ proc test_character_literals_accepted {} { } proc test_integer_literals_rejected {} { - global prompt + global gdb_prompt test_print_reject "p 0x" gdb_test "p ''" "Empty character constant\\." @@ -129,7 +129,7 @@ proc test_integer_literals_rejected {} { } proc test_print_all_chars {} { - global prompt + global gdb_prompt gdb_test "p ctable1\[0\]" " = 0 '\\\\000'" gdb_test "p ctable1\[1\]" " = 1 '\\\\001'" @@ -393,7 +393,7 @@ proc test_print_all_chars {} { # repeat count, set to the default of 10. proc test_print_repeats_10 {} { - global prompt + global gdb_prompt gdb_test "set print elements 1" "" gdb_test "p &ctable2\[0*16\]" " = \\(unsigned char \\*\\) \"a\"..." @@ -781,7 +781,7 @@ proc test_print_repeats_10 {} { } proc test_print_strings {} { - global prompt + global gdb_prompt # We accept "(unsigned char *) " before the string. char vs. unsigned char # is already tested elsewhere. @@ -875,7 +875,7 @@ proc test_print_strings {} { } proc test_print_int_arrays {} { - global prompt + global gdb_prompt gdb_test "set print elements 24" "" @@ -900,7 +900,7 @@ proc test_artificial_arrays {} { } proc test_print_char_arrays {} { - global prompt + global gdb_prompt global hex gdb_test "set print elements 24" "" @@ -925,7 +925,7 @@ proc test_print_char_arrays {} { } proc test_print_string_constants {} { - global prompt + global gdb_prompt gdb_test "set print elements 50" "" diff --git a/gdb/testsuite/gdb.base/ptype.exp b/gdb/testsuite/gdb.base/ptype.exp index 7bd9ca8..fec31eb 100644 --- a/gdb/testsuite/gdb.base/ptype.exp +++ b/gdb/testsuite/gdb.base/ptype.exp @@ -55,15 +55,15 @@ gdb_load ${binfile} send_gdb "ptype red1\n" expect { - -re "type = enum primary1_tag \{red1, green1, blue1\}.*$prompt $"\ + -re "type = enum primary1_tag \{red1, green1, blue1\}.*$gdb_prompt $"\ { # The workaround is in effect. As this is a compiler, not GDB, # bug, we'll make it a PASS but perhaps it should be an XFAIL. pass "ptype unnamed enumeration member (worked around)" } - -re "type = enum \{red1, green1, blue1\}.*$prompt $"\ + -re "type = enum \{red1, green1, blue1\}.*$gdb_prompt $"\ { pass "ptype unnamed enumeration member" } - -re ".*$prompt $" { fail "ptype unnamed enumeration member" } + -re ".*$gdb_prompt $" { fail "ptype unnamed enumeration member" } timeout { fail "(timeout) ptype unnamed enumeration member" } } @@ -82,8 +82,8 @@ expect { (long|long int|int) v_long_member;.* float v_float_member;.* double v_double_member;.* -\}.*$prompt $" { pass "ptype structure" } - -re ".*$prompt $" { fail "ptype structure" } +\}.*$gdb_prompt $" { pass "ptype structure" } + -re ".*$gdb_prompt $" { fail "ptype structure" } timeout { fail "(timeout) ptype structure" } } @@ -117,8 +117,8 @@ expect { struct link \[*\]next;.* struct link \[*(\]+linkfunc\[)(\]+(struct link \[*\], int\[)\]|);.* struct t_struct stuff.1..2..3.;.* -\}.*$prompt $" { pass "ptype linked list structure" } - -re ".*$prompt $" { +\}.*$gdb_prompt $" { pass "ptype linked list structure" } + -re ".*$gdb_prompt $" { # IBM's xlc puts out bogus stabs--the stuff field is type 42, # which isn't defined. @@ -141,8 +141,8 @@ expect { (long|long int|int) v_long_member;.* float v_float_member;.* double v_double_member;.* -\}.*$prompt $" { pass "ptype union" } - -re ".*$prompt $" { fail "ptype union" } +\}.*$gdb_prompt $" { pass "ptype union" } + -re ".*$gdb_prompt $" { fail "ptype union" } timeout { fail "(timeout) ptype union" } } @@ -153,8 +153,8 @@ expect { struct link \[*\]next;.* struct link \[(\*\]+linkfunc\[)(\]+(struct link \[*\], int\[)\]|);.* struct t_struct stuff.1..2..3.;.* -\}.*$prompt $" { pass "ptype linked list union" } - -re ".*$prompt $" { +\}.*$gdb_prompt $" { pass "ptype linked list union" } + -re ".*$gdb_prompt $" { # IBM's xlc puts out bogus stabs--the stuff field is type 42, # which isn't defined. @@ -171,17 +171,17 @@ expect { send_gdb "ptype primary\n" expect { - -re "type = enum .red, green, blue.*$prompt $" { pass "ptype unnamed enumeration" } - -re ".*$prompt $" { fail "ptype unnamed enumeration" } + -re "type = enum .red, green, blue.*$gdb_prompt $" { pass "ptype unnamed enumeration" } + -re ".*$gdb_prompt $" { fail "ptype unnamed enumeration" } timeout { fail "(timeout) ptype unnamed enumeration" } } send_gdb "ptype enum colors\n" expect { - -re "type = enum colors \{yellow, purple, pink\}.*$prompt $"\ + -re "type = enum colors \{yellow, purple, pink\}.*$gdb_prompt $"\ { pass "ptype named enumeration" } - -re ".*$prompt $" { fail "ptype named enumeration" } + -re ".*$gdb_prompt $" { fail "ptype named enumeration" } timeout { fail "(timeout) ptype named enumeration" } } @@ -191,8 +191,8 @@ expect { # send_gdb "ptype boolean\n" expect { - -re "type = enum \{FALSE, TRUE\}.*$prompt $" { pass "ptype unnamed typedef'd enumeration" } - -re ".*$prompt $" { fail "ptype unnamed typedef'd enumeration" } + -re "type = enum \{FALSE, TRUE\}.*$gdb_prompt $" { pass "ptype unnamed typedef'd enumeration" } + -re ".*$gdb_prompt $" { fail "ptype unnamed typedef'd enumeration" } timeout { fail "(timeout) ptype unnamed typedef'd enumeration" } } @@ -220,8 +220,8 @@ gdb_test "ptype t_union3" "type = union \{.* send_gdb "ptype enum bvals\n" expect { - -re "type = enum bvals \{false, true\}.*$prompt $" { pass "ptype named typedef'd enumf'd enum" } - -re ".*$prompt $" { fail "ptype named typedef'd enumeration" } + -re "type = enum bvals \{false, true\}.*$gdb_prompt $" { pass "ptype named typedef'd enumf'd enum" } + -re ".*$gdb_prompt $" { fail "ptype named typedef'd enumeration" } timeout { fail "(timeout) ptype named typedef'd enumeration" } } @@ -231,9 +231,9 @@ expect { # send_gdb "ptype enum misordered\n" expect { - -re "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*$prompt $"\ + -re "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*$gdb_prompt $"\ { pass "ptype misordered enumeration" } - -re ".*$prompt $" { fail "ptype misordered enumeration" } + -re ".*$gdb_prompt $" { fail "ptype misordered enumeration" } timeout { fail "(timeout) ptype misordered enumeration" } } @@ -243,18 +243,18 @@ expect { # send_gdb "ptype three\n" expect { - -re "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*$prompt $"\ + -re "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*$gdb_prompt $"\ { pass "ptype named enumeration member" } - -re ".*$prompt $" { fail "ptype named enumeration member" } + -re ".*$gdb_prompt $" { fail "ptype named enumeration member" } timeout { fail "(timeout) ptype named enumeration member" } } send_gdb "ptype red\n" expect { - -re "type = enum \{red, green, blue\}.*$prompt $"\ + -re "type = enum \{red, green, blue\}.*$gdb_prompt $"\ { pass "ptype unnamed enumeration member" } - -re ".*$prompt $" { fail "ptype unnamed enumeration member" } + -re ".*$gdb_prompt $" { fail "ptype unnamed enumeration member" } timeout { fail "(timeout) ptype unnamed enumeration member" } } @@ -271,8 +271,8 @@ expect { #setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*" #send "ptype v_char\n" #expect { -# -re "type = char.*$prompt $" { pass "ptype char" } -# -re ".*$prompt $" { fail "ptype char" } +# -re "type = char.*$gdb_prompt $" { pass "ptype char" } +# -re ".*$gdb_prompt $" { fail "ptype char" } # timeout { fail "(timeout) ptype char" } #} # @@ -280,104 +280,104 @@ expect { #setup_xfail "mips-*-*" "a29k-*-*" #send "ptype v_signed_char\n" #expect { -# -re "type = signed char.*$prompt $" { pass "ptype signed char" } -# -re ".*$prompt $" { fail "ptype signed char" } +# -re "type = signed char.*$gdb_prompt $" { pass "ptype signed char" } +# -re ".*$gdb_prompt $" { fail "ptype signed char" } # timeout { fail "(timeout) ptype signed char" } #} # # #send "ptype v_unsigned_char\n" #expect { -# -re "type = unsigned char.*$prompt $" { pass "ptype unsigned char" } -# -re ".*$prompt $" { fail "ptype unsigned char" } +# -re "type = unsigned char.*$gdb_prompt $" { pass "ptype unsigned char" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned char" } # timeout { fail "(timeout) ptype unsigned char" } #} send_gdb "ptype v_short\n" expect { - -re "type = short(| int).*$prompt $" { pass "ptype short" } - -re ".*$prompt $" { fail "ptype short" } + -re "type = short(| int).*$gdb_prompt $" { pass "ptype short" } + -re ".*$gdb_prompt $" { fail "ptype short" } timeout { fail "(timeout) ptype short" } } #send "ptype v_signed_short\n" #expect { -# -re "type = short.*$prompt $" { pass "ptype signed short" } -# -re ".*$prompt $" { fail "ptype signed short" } +# -re "type = short.*$gdb_prompt $" { pass "ptype signed short" } +# -re ".*$gdb_prompt $" { fail "ptype signed short" } # timeout { fail "(timeout) ptype signed short" } #} # # #send "ptype v_unsigned_short\n" #expect { -# -re "type = unsigned short.*$prompt $" { pass "ptype unsigned short" } -# -re ".*$prompt $" { fail "ptype unsigned short" } +# -re "type = unsigned short.*$gdb_prompt $" { pass "ptype unsigned short" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned short" } # timeout { fail "(timeout) ptype unsigned short" } #} send_gdb "ptype v_int\n" expect { - -re "type = int.*$prompt $" { pass "ptype int" } - -re ".*$prompt $" { fail "ptype int" } + -re "type = int.*$gdb_prompt $" { pass "ptype int" } + -re ".*$gdb_prompt $" { fail "ptype int" } timeout { fail "(timeout) ptype int" } } #send "ptype v_signed_int\n" #expect { -# -re "type = int.*$prompt $" { pass "ptype signed int" } -# -re ".*$prompt $" { fail "ptype signed int" } +# -re "type = int.*$gdb_prompt $" { pass "ptype signed int" } +# -re ".*$gdb_prompt $" { fail "ptype signed int" } # timeout { fail "(timeout) ptype signed int" } #} # # #send "ptype v_unsigned_int\n" #expect { -# -re "type = unsigned int.*$prompt $" { pass "ptype unsigned int" } -# -re ".*$prompt $" { fail "ptype unsigned int" } +# -re "type = unsigned int.*$gdb_prompt $" { pass "ptype unsigned int" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned int" } # timeout { fail "(timeout) ptype unsigned int" } #} # # #send "ptype v_long\n" #expect { -# -re "type = long.*$prompt $" { pass "ptype long" } -# -re ".*$prompt $" { fail "ptype long" } +# -re "type = long.*$gdb_prompt $" { pass "ptype long" } +# -re ".*$gdb_prompt $" { fail "ptype long" } # timeout { fail "(timeout) ptype long" } #} # # #send "ptype v_signed_long\n" #expect { -# -re "type = long.*$prompt $" { pass "ptype signed long" } -# -re ".*$prompt $" { fail "ptype signed long" } +# -re "type = long.*$gdb_prompt $" { pass "ptype signed long" } +# -re ".*$gdb_prompt $" { fail "ptype signed long" } # timeout { fail "(timeout) ptype signed long" } #} # # #send "ptype v_unsigned_long\n" #expect { -# -re "type = unsigned long.*$prompt $" { pass "ptype unsigned long" } -# -re ".*$prompt $" { fail "ptype unsigned long" } +# -re "type = unsigned long.*$gdb_prompt $" { pass "ptype unsigned long" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned long" } # timeout { fail "(timeout) ptype unsigned long" } #} # # #send "ptype v_float\n" #expect { -# -re "type = float.*$prompt $" { pass "ptype float" } -# -re ".*$prompt $" { fail "ptype float" } +# -re "type = float.*$gdb_prompt $" { pass "ptype float" } +# -re ".*$gdb_prompt $" { fail "ptype float" } # timeout { fail "(timeout) ptype float" } #} # # #send "ptype v_double\n" #expect { -# -re "type = double.*$prompt $" { pass "ptype double" } -# -re ".*$prompt $" { fail "ptype double" } +# -re "type = double.*$gdb_prompt $" { pass "ptype double" } +# -re ".*$gdb_prompt $" { fail "ptype double" } # timeout { fail "(timeout) ptype double" } #} @@ -389,8 +389,8 @@ expect { #setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*" #send "ptype v_char_array\n" #expect { -# -re "type = char .2..*$prompt $" { pass "ptype char array" } -# -re ".*$prompt $" { fail "ptype char array" } +# -re "type = char .2..*$gdb_prompt $" { pass "ptype char array" } +# -re ".*$gdb_prompt $" { fail "ptype char array" } # timeout { fail "(timeout) ptype char array" } #} # @@ -398,16 +398,16 @@ expect { #setup_xfail "mips-*-*" "a29k-*-*" #send "ptype v_signed_char_array\n" #expect { -# -re "type = (|signed )char .2..*$prompt $" { pass "ptype signed char array" } -# -re ".*$prompt $" { fail "ptype signed char array" } +# -re "type = (|signed )char .2..*$gdb_prompt $" { pass "ptype signed char array" } +# -re ".*$gdb_prompt $" { fail "ptype signed char array" } # timeout { fail "(timeout) ptype signed char array" } #} # # #send "ptype v_unsigned_char_array\n" #expect { -# -re "type = unsigned char .2..*$prompt $" { pass "ptype unsigned char array" } -# -re ".*$prompt $" { fail "ptype unsigned char array" } +# -re "type = unsigned char .2..*$gdb_prompt $" { pass "ptype unsigned char array" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned char array" } # timeout { fail "(timeout) ptype unsigned char array" } #} # @@ -415,66 +415,66 @@ expect { # #send "ptype v_int_array\n" #expect { -# -re "type = int .2..*$prompt $" { pass "ptype int array" } -# -re ".*$prompt $" { fail "ptype int array" } +# -re "type = int .2..*$gdb_prompt $" { pass "ptype int array" } +# -re ".*$gdb_prompt $" { fail "ptype int array" } # timeout { fail "(timeout) ptype int array" } #} # # #send "ptype v_signed_int_array\n" #expect { -# -re "type = int .2..*$prompt $" { pass "ptype signed int array" } -# -re ".*$prompt $" { fail "ptype signed int array" } +# -re "type = int .2..*$gdb_prompt $" { pass "ptype signed int array" } +# -re ".*$gdb_prompt $" { fail "ptype signed int array" } # timeout { fail "(timeout) ptype signed int array" } #} # # #send "ptype v_unsigned_int_array\n" #expect { -# -re "type = unsigned int .2..*$prompt $" { pass "ptype unsigned int array" } -# -re ".*$prompt $" { fail "ptype unsigned int array" } +# -re "type = unsigned int .2..*$gdb_prompt $" { pass "ptype unsigned int array" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned int array" } # timeout { fail "(timeout) ptype unsigned int array" } #} # # #send "ptype v_long_array\n" #expect { -# -re "type = (long|int|long int) .2..*$prompt $" { +# -re "type = (long|int|long int) .2..*$gdb_prompt $" { # pass "ptype long array" } -# -re ".*$prompt $" { fail "ptype long array" } +# -re ".*$gdb_prompt $" { fail "ptype long array" } # timeout { fail "(timeout) ptype long array" } #} # # #send "ptype v_signed_long_array\n" #expect { -# -re "type = (long|int|long int) .2..*$prompt $" { +# -re "type = (long|int|long int) .2..*$gdb_prompt $" { # pass "ptype signed long array" } -# -re ".*$prompt $" { fail "ptype signed long array" } +# -re ".*$gdb_prompt $" { fail "ptype signed long array" } # timeout { fail "(timeout) ptype signed long array" } #} # # #send "ptype v_unsigned_long_array\n" #expect { -# -re "type = unsigned long .2..*$prompt $" { pass "ptype unsigned long array" } -# -re ".*$prompt $" { fail "ptype unsigned long array" } +# -re "type = unsigned long .2..*$gdb_prompt $" { pass "ptype unsigned long array" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned long array" } # timeout { fail "(timeout) ptype unsigned long array" } #} # # #send "ptype v_float_array\n" #expect { -# -re "type = float .2..*$prompt $" { pass "ptype float array" } -# -re ".*$prompt $" { fail "ptype float array" } +# -re "type = float .2..*$gdb_prompt $" { pass "ptype float array" } +# -re ".*$gdb_prompt $" { fail "ptype float array" } # timeout { fail "(timeout) ptype float array" } #} # # #send "ptype v_double_array\n" #expect { -# -re "type = double .2..*$prompt $" { pass "ptype double array" } -# -re ".*$prompt $" { fail "ptype double array" } +# -re "type = double .2..*$gdb_prompt $" { pass "ptype double array" } +# -re ".*$gdb_prompt $" { fail "ptype double array" } # timeout { fail "(timeout) ptype double array" } #} # @@ -490,8 +490,8 @@ gdb_test "ptype t_char_array" "type = (|unsigned )char \\\[0?\\\]" #setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*" #send "ptype v_char_pointer\n" #expect { -# -re "type = char \*.*$prompt $" { pass "ptype char pointer" } -# -re ".*$prompt $" { fail "ptype char pointer" } +# -re "type = char \*.*$gdb_prompt $" { pass "ptype char pointer" } +# -re ".*$gdb_prompt $" { fail "ptype char pointer" } # timeout { fail "(timeout) ptype char pointer" } #} # @@ -499,105 +499,105 @@ gdb_test "ptype t_char_array" "type = (|unsigned )char \\\[0?\\\]" #setup_xfail "mips-*-*" "a29k-*-*" #send "ptype v_signed_char_pointer\n" #expect { -# -re "type = (|signed )char \*.*$prompt $" +# -re "type = (|signed )char \*.*$gdb_prompt $" # { pass "ptype signed char pointer" } -# -re ".*$prompt $" { fail "ptype signed char pointer" } +# -re ".*$gdb_prompt $" { fail "ptype signed char pointer" } # timeout { fail "(timeout) ptype signed char pointer" } #} # # #send "ptype v_unsigned_char_pointer\n" #expect { -# -re "type = unsigned char \*.*$prompt $" { pass "ptype unsigned char pointer" } -# -re ".*$prompt $" { fail "ptype unsigned char pointer" } +# -re "type = unsigned char \*.*$gdb_prompt $" { pass "ptype unsigned char pointer" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned char pointer" } # timeout { fail "(timeout) ptype unsigned char pointer" } #} # # #send "ptype v_short_pointer\n" #expect { -# -re "type = (short|short int) \*.*$prompt $" { pass "ptype short pointer" } -# -re ".*$prompt $" { fail "ptype short pointer" } +# -re "type = (short|short int) \*.*$gdb_prompt $" { pass "ptype short pointer" } +# -re ".*$gdb_prompt $" { fail "ptype short pointer" } # timeout { fail "(timeout) ptype short pointer" } #} # # #send "ptype v_signed_short_pointer\n" #expect { -# -re "type = short \*.*$prompt $" { pass "ptype signed short pointer" } -# -re ".*$prompt $" { fail "ptype signed short pointer" } +# -re "type = short \*.*$gdb_prompt $" { pass "ptype signed short pointer" } +# -re ".*$gdb_prompt $" { fail "ptype signed short pointer" } # timeout { fail "(timeout) ptype signed short pointer" } #} # # #send "ptype v_unsigned_short_pointer\n" #expect { -# -re "type = unsigned short \*.*$prompt $" { pass "ptype unsigned short pointer" } -# -re ".*$prompt $" { fail "ptype unsigned short pointer" } +# -re "type = unsigned short \*.*$gdb_prompt $" { pass "ptype unsigned short pointer" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned short pointer" } # timeout { fail "(timeout) ptype unsigned short pointer" } #} # # #send "ptype v_int_pointer\n" #expect { -# -re "type = int \*.*$prompt $" { pass "ptype int pointer" } -# -re ".*$prompt $" { fail "ptype int pointer" } +# -re "type = int \*.*$gdb_prompt $" { pass "ptype int pointer" } +# -re ".*$gdb_prompt $" { fail "ptype int pointer" } # timeout { fail "(timeout) ptype int pointer" } #} # # #send "ptype v_signed_int_pointer\n" #expect { -# -re "type = int \*.*$prompt $" { pass "ptype signed int pointer" } -# -re ".*$prompt $" { fail "ptype signed int pointer" } +# -re "type = int \*.*$gdb_prompt $" { pass "ptype signed int pointer" } +# -re ".*$gdb_prompt $" { fail "ptype signed int pointer" } # timeout { fail "(timeout) ptype signed int pointer" } #} # # #send "ptype v_unsigned_int_pointer\n" #expect { -# -re "type = unsigned int \*.*$prompt $" { pass "ptype unsigned int pointer" } -# -re ".*$prompt $" { fail "ptype unsigned int pointer" } +# -re "type = unsigned int \*.*$gdb_prompt $" { pass "ptype unsigned int pointer" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned int pointer" } # timeout { fail "(timeout) ptype unsigned int pointer" } #} # # #send "ptype v_long_pointer\n" #expect { -# -re "type = long \*.*$prompt $" { pass "ptype long pointer" } -# -re ".*$prompt $" { fail "ptype long pointer" } +# -re "type = long \*.*$gdb_prompt $" { pass "ptype long pointer" } +# -re ".*$gdb_prompt $" { fail "ptype long pointer" } # timeout { fail "(timeout) ptype long pointer" } #} # # #send "ptype v_signed_long_pointer\n" #expect { -# -re "type = long \*.*$prompt $" { pass "ptype signed long pointer" } -# -re ".*$prompt $" { fail "ptype signed long pointer" } +# -re "type = long \*.*$gdb_prompt $" { pass "ptype signed long pointer" } +# -re ".*$gdb_prompt $" { fail "ptype signed long pointer" } # timeout { fail "(timeout) ptype signed long pointer" } #} # # #send "ptype v_unsigned_long_pointer\n" #expect { -# -re "type = unsigned long \*.*$prompt $" { pass "ptype unsigned long pointer" } -# -re ".*$prompt $" { fail "ptype unsigned long pointer" } +# -re "type = unsigned long \*.*$gdb_prompt $" { pass "ptype unsigned long pointer" } +# -re ".*$gdb_prompt $" { fail "ptype unsigned long pointer" } # timeout { fail "(timeout) ptype unsigned long pointer" } #} # # #send "ptype v_float_pointer\n" #expect { -# -re "type = float \*.*$prompt $" { pass "ptype float pointer" } -# -re ".*$prompt $" { fail "ptype float pointer" } +# -re "type = float \*.*$gdb_prompt $" { pass "ptype float pointer" } +# -re ".*$gdb_prompt $" { fail "ptype float pointer" } # timeout { fail "(timeout) ptype float pointer" } #} # # #send "ptype v_double_pointer\n" #expect { -# -re "type = double \*.*$prompt $" { pass "ptype double pointer" } -# -re ".*$prompt $" { fail "ptype double pointer" } +# -re "type = double \*.*$gdb_prompt $" { pass "ptype double pointer" } +# -re ".*$gdb_prompt $" { fail "ptype double pointer" } # timeout { fail "(timeout) ptype double pointer" } #} @@ -611,8 +611,8 @@ expect { struct inner_struct inner_struct_instance;.* union inner_union inner_union_instance;.* (long|long int|int) outer_long;.* -\}.*$prompt $" { pass "ptype outer structure" } - -re ".*$prompt $" { fail "ptype outer structure" } +\}.*$gdb_prompt $" { pass "ptype outer structure" } + -re ".*$gdb_prompt $" { fail "ptype outer structure" } timeout { fail "(timeout) ptype outer structure" } } @@ -622,8 +622,8 @@ expect { -re "type = struct inner_struct \{.* int inner_int;.* (long|long int|int) inner_long;.* -\}.*$prompt $" { pass "ptype inner structure" } - -re ".*$prompt $" { fail "ptype inner structure" } +\}.*$gdb_prompt $" { pass "ptype inner structure" } + -re ".*$gdb_prompt $" { fail "ptype inner structure" } timeout { fail "(timeout) ptype inner structure" } } @@ -633,8 +633,8 @@ expect { -re "type = union inner_union \{.* int inner_union_int;.* (long|long int|int) inner_union_long;.* -\}.*$prompt $" { pass "ptype inner union" } - -re ".*$prompt $" { fail "ptype inner union" } +\}.*$gdb_prompt $" { pass "ptype inner union" } + -re ".*$gdb_prompt $" { fail "ptype inner union" } timeout { fail "(timeout) ptype inner union" } } @@ -646,16 +646,16 @@ expect { struct inner_struct inner_struct_instance;.* union inner_union inner_union_instance;.* (long|long int|int) outer_long;.* -\}.*$prompt $" { pass "ptype nested structure" } - -re ".*$prompt $" { fail "ptype nested structure" } +\}.*$gdb_prompt $" { pass "ptype nested structure" } + -re ".*$gdb_prompt $" { fail "ptype nested structure" } timeout { fail "(timeout) ptype nested structure" } } send_gdb "ptype nested_su.outer_int\n" expect { - -re "type = int.*$prompt $" { pass "ptype outer int" } - -re ".*$prompt $" { fail "ptype outer int" } + -re "type = int.*$gdb_prompt $" { pass "ptype outer int" } + -re ".*$gdb_prompt $" { fail "ptype outer int" } timeout { fail "(timeout) ptype outer int" } } @@ -665,16 +665,16 @@ expect { -re "type = struct inner_struct \{.* int inner_int;.* (long|long int|int) inner_long;.* -\}.*$prompt $" { pass "ptype nested structure" } - -re ".*$prompt $" { fail "ptype nested structure" } +\}.*$gdb_prompt $" { pass "ptype nested structure" } + -re ".*$gdb_prompt $" { fail "ptype nested structure" } timeout { fail "(timeout) ptype nested structure" } } send_gdb "ptype nested_su.inner_struct_instance.inner_int\n" expect { - -re "type = int.*$prompt $" { pass "ptype inner int" } - -re ".*$prompt $" { fail "ptype inner int" } + -re "type = int.*$gdb_prompt $" { pass "ptype inner int" } + -re ".*$gdb_prompt $" { fail "ptype inner int" } timeout { fail "(timeout) ptype inner int" } } @@ -684,8 +684,8 @@ expect { -re "type = union inner_union \{.* int inner_union_int;.* (long|long int|int) inner_union_long;.* -\}.*$prompt $" { pass "ptype nested union" } - -re ".*$prompt $" { fail "ptype nested union" } +\}.*$gdb_prompt $" { pass "ptype nested union" } + -re ".*$gdb_prompt $" { fail "ptype nested union" } timeout { fail "(timeout) ptype nested union" } } diff --git a/gdb/testsuite/gdb.base/setvar.exp b/gdb/testsuite/gdb.base/setvar.exp index 2feef72..7ff717d 100644 --- a/gdb/testsuite/gdb.base/setvar.exp +++ b/gdb/testsuite/gdb.base/setvar.exp @@ -52,7 +52,7 @@ gdb_load $binfile # # set it up at a breakpoint so we canplay with the variable values # -send_gdb "set print sevenbit-strings\n" ; expect -re "$prompt $" +send_gdb "set print sevenbit-strings\n" ; expect -re "$gdb_prompt $" if ![runto_main] then { perror "couldn't run to breakpoint" @@ -66,19 +66,19 @@ set ulong_minus_1 4294967295 set ulong_minus_456 4294966840 send_gdb "print sizeof (unsigned long)\n" expect { - -re ".\[0-9\]* = 4.*$prompt $" {} - -re ".\[0-9\]* = 8.*$prompt $" { + -re ".\[0-9\]* = 4.*$gdb_prompt $" {} + -re ".\[0-9\]* = 8.*$gdb_prompt $" { set ulong_minus_1 18446744073709551615 set ulong_minus_456 18446744073709551160 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "getting sizeof unsigned long" } default { fail "(timeout) getting sizeof unsigned long" } } proc test_set { args } { - global prompt + global gdb_prompt set length [expr [llength $args] - 3]; set print_cmd "[lindex $args $length]"; diff --git a/gdb/testsuite/gdb.base/sigall.exp b/gdb/testsuite/gdb.base/sigall.exp index 80cd3b6..d483788 100644 --- a/gdb/testsuite/gdb.base/sigall.exp +++ b/gdb/testsuite/gdb.base/sigall.exp @@ -44,7 +44,7 @@ set thissig "ABRT" proc test_one_sig {nextsig} { global sig_supported - global prompt + global gdb_prompt global thissig set this_sig_supported $sig_supported @@ -61,10 +61,10 @@ proc test_one_sig {nextsig} { setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu" } expect { - -re "Continuing.*Program received signal SIG$thissig.*$prompt $" { + -re "Continuing.*Program received signal SIG$thissig.*$gdb_prompt $" { pass "get signal $thissig" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "get signal $thissig" set need_another_continue 0 } @@ -95,10 +95,10 @@ proc test_one_sig {nextsig} { setup_xfail "*-*-*lynx*" } expect { - -re "Breakpoint.*handle_$thissig.*$prompt $" { + -re "Breakpoint.*handle_$thissig.*$gdb_prompt $" { pass "send signal $thissig" } - -re "Breakpoint.*gen_$nextsig.*kill.*$prompt $" { + -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" { fail "missed breakpoint at handle_$thissig" set missed_handler 1 } @@ -108,15 +108,15 @@ proc test_one_sig {nextsig} { if { $missed_handler == "0" } then { send_gdb "signal 0\n" expect { - -re "Breakpoint.*gen_$nextsig.*kill.*$prompt $" { + -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" { pass "advance to $nextsig" set sig_supported 1 } - -re "Breakpoint.*gen_$nextsig.*handle.*$prompt $" { + -re "Breakpoint.*gen_$nextsig.*handle.*$gdb_prompt $" { pass "advance to $nextsig" set sig_supported 0 } - -re ".*$prompt $" { fail "advance to $nextsig" } + -re ".*$gdb_prompt $" { fail "advance to $nextsig" } default { fail "advance to $nextsig (eof or timeout)" } } } diff --git a/gdb/testsuite/gdb.base/structs.exp b/gdb/testsuite/gdb.base/structs.exp index 88f9a5c..fae0f71 100644 --- a/gdb/testsuite/gdb.base/structs.exp +++ b/gdb/testsuite/gdb.base/structs.exp @@ -65,7 +65,7 @@ if [istarget "a29k-*-udi"] then { proc do_function_calls {} { global prototypes global gcc_compiled - global prompt + global gdb_prompt # First, call the "fun" functions and examine the value they return. gdb_test "p fun1()" " = {a = 49 '1'}" @@ -129,9 +129,9 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -send_gdb "set print sevenbit-strings\n" ; expect -re "$prompt $" -send_gdb "set print address off\n" ; expect -re "$prompt $" -send_gdb "set width 0\n" ; expect -re "$prompt $" +send_gdb "set print sevenbit-strings\n" ; expect -re "$gdb_prompt $" +send_gdb "set print address off\n" ; expect -re "$gdb_prompt $" +send_gdb "set width 0\n" ; expect -re "$gdb_prompt $" if [runto_main] then { do_function_calls diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp index 616fb63..2b34c41 100644 --- a/gdb/testsuite/gdb.base/watchpoint.exp +++ b/gdb/testsuite/gdb.base/watchpoint.exp @@ -51,42 +51,42 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb # 3 Watchpoint ival3 proc initialize {} { - global prompt + global gdb_prompt global hex global decimal global srcfile send_gdb "break marker1\n" expect { - -re "Breakpoint 1 at $hex: file .*$srcfile, line $decimal.*$prompt $" { + -re "Breakpoint 1 at $hex: file .*$srcfile, line $decimal.*$gdb_prompt $" { pass "set breakpoint at marker1" } - -re ".*$prompt $" { fail "set breakpoint at marker1" ; return 0 } + -re ".*$gdb_prompt $" { fail "set breakpoint at marker1" ; return 0 } timeout { fail "set breakpoint at marker1 (timeout)" ; return 0 } } send_gdb "break marker2\n" expect { - -re "Breakpoint 2 at $hex: file .*$srcfile, line $decimal.*$prompt $" { + -re "Breakpoint 2 at $hex: file .*$srcfile, line $decimal.*$gdb_prompt $" { pass "set breakpoint at marker2" } - -re ".*$prompt $" { fail "set breakpoint at marker2" ; return 0 } + -re ".*$gdb_prompt $" { fail "set breakpoint at marker2" ; return 0 } timeout { fail "set breakpoint at marker2 (timeout)" ; return 0 } } send_gdb "info break\n" expect { - -re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n$prompt $" { pass "info break in watchpoint.exp" } - -re ".*$prompt $" { fail "info break in watchpoint.exp" ; return 0 } + -re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n$gdb_prompt $" { pass "info break in watchpoint.exp" } + -re ".*$gdb_prompt $" { fail "info break in watchpoint.exp" ; return 0 } timeout { fail "info break in watchpoint.exp (timeout)" ; return 0 } } send_gdb "watch ival3\n" expect { - -re ".*\[Ww\]atchpoint 3: ival3\r\n$prompt $" { + -re ".*\[Ww\]atchpoint 3: ival3\r\n$gdb_prompt $" { pass "set watchpoint on ival3" } - -re ".*$prompt $" { fail "set watchpoint on ival3" ; return 0 } + -re ".*$gdb_prompt $" { fail "set watchpoint on ival3" ; return 0 } timeout { fail "set watchpoint on ival3 (timeout)" ; return 0 } } @@ -94,10 +94,10 @@ proc initialize {} { send_gdb "info watch\n" expect { - -re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3\r\n$prompt $" { + -re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3\r\n$gdb_prompt $" { pass "watchpoint found in watchpoint/breakpoint table" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "watchpoint found in watchpoint/breakpoint table" ; return 0 } timeout { @@ -111,8 +111,8 @@ proc initialize {} { send_gdb "disable 3\n" expect { - -re "disable 3\[\r\n\]+$prompt $" { pass "disable watchpoint" } - -re ".*$prompt $" { fail "disable watchpoint" ; return 0 } + -re "disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint" } + -re ".*$gdb_prompt $" { fail "disable watchpoint" ; return 0 } timeout { fail "disable watchpoint (timeout)" ; return 0 } } @@ -124,7 +124,7 @@ proc initialize {} { # proc test_simple_watchpoint {} { - global prompt + global gdb_prompt global hex global decimal global noresults @@ -133,10 +133,10 @@ proc test_simple_watchpoint {} { send_gdb "disable 3\n" expect { - -re "^disable 3\[\r\n\]+$prompt $" { + -re "^disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint in test_simple_watchpoint" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "disable watchpoint in test_simple_watchpoint" return 0 } @@ -151,10 +151,10 @@ proc test_simple_watchpoint {} { gdb_run_cmd set timeout 600 expect { - -re "Breakpoint 1, marker1 .*$prompt $" { + -re "Breakpoint 1, marker1 .*$gdb_prompt $" { pass "run to marker1 in test_simple_watchpoint" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run to marker1 in test_simple_watchpoint" return } @@ -168,8 +168,8 @@ proc test_simple_watchpoint {} { send_gdb "enable 3\n" expect { - -re "^enable 3\[\r\n\]+$prompt $" { pass "enable watchpoint" } - -re ".*$prompt $" { fail "enable watchpoint" ; return } + -re "^enable 3\[\r\n\]+$gdb_prompt $" { pass "enable watchpoint" } + -re ".*$gdb_prompt $" { fail "enable watchpoint" ; return } timeout { fail "enable watchpoint (timeout)" ; return } } @@ -183,10 +183,10 @@ proc test_simple_watchpoint {} { send_gdb "cont\n" expect { - -re "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count; ival4 = count;.*$prompt $" { + -re "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count; ival4 = count;.*$gdb_prompt $" { pass "watchpoint hit, first time" } - -re "Continuing.*Breakpoint.*func1.*$prompt $" { + -re "Continuing.*Breakpoint.*func1.*$gdb_prompt $" { setup_xfail "m68*-*-*" 2597 fail "thought it hit breakpoint at func1 twice" gdb_test "delete \$func1_breakpoint_number" "" @@ -194,7 +194,7 @@ proc test_simple_watchpoint {} { Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count;" \ "watchpoint hit, first time" } - -re ".*$prompt $" { fail "watchpoint hit, first time" ; return } + -re ".*$gdb_prompt $" { fail "watchpoint hit, first time" ; return } timeout { fail "watchpoint hit, first time (timeout)" ; return } eof { fail "watchpoint hit, first time (eof)" ; return } } @@ -225,8 +225,8 @@ Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count send_gdb "disable 3\n" expect { - -re "^disable 3\[\r\n\]+$prompt $" { pass "watchpoint disabled" } - -re ".*$prompt $" { fail "watchpoint disabled" ; return } + -re "^disable 3\[\r\n\]+$gdb_prompt $" { pass "watchpoint disabled" } + -re ".*$gdb_prompt $" { fail "watchpoint disabled" ; return } timeout { fail "watchpoint disabled (timeout)" ; return } } @@ -241,7 +241,7 @@ Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count # Test disabling watchpoints. proc test_disabling_watchpoints {} { - global prompt + global gdb_prompt global binfile global srcfile global decimal @@ -252,10 +252,10 @@ proc test_disabling_watchpoints {} { send_gdb "disable 3\n" expect { - -re "^disable 3\[\r\n\]+$prompt $" { + -re "^disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint in test_disabling_watchpoints" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "disable watchpoint in test_disabling_watchpoints" return 0 } @@ -270,10 +270,10 @@ proc test_disabling_watchpoints {} { gdb_run_cmd set timeout 600 expect { - -re "Breakpoint 1, marker1 .*$prompt $" { + -re "Breakpoint 1, marker1 .*$gdb_prompt $" { pass "run to marker1 in test_disabling_watchpoints" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "run to marker1 in test_disabling_watchpoints" return } @@ -287,8 +287,8 @@ proc test_disabling_watchpoints {} { send_gdb "enable 3\n" expect { - -re "^enable 3\[\r\n\]+$prompt $" { pass "watchpoint enabled" } - -re ".*$prompt $" { fail "watchpoint enabled" ; return } + -re "^enable 3\[\r\n\]+$gdb_prompt $" { pass "watchpoint enabled" } + -re ".*$gdb_prompt $" { fail "watchpoint enabled" ; return } timeout { fail "watchpoint enabled (timeout)" ; return } } @@ -304,10 +304,10 @@ proc test_disabling_watchpoints {} { send_gdb "disable 3\n" expect { - -re "^disable 3\[\r\n\]+$prompt $" { + -re "^disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint #2 in test_disabling_watchpoints" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { "disable watchpoint #2 in test_disabling_watchpoints" return 0 } @@ -334,7 +334,7 @@ proc test_disabling_watchpoints {} { # Test stepping and other mundane operations with watchpoints enabled proc test_stepping {} { - global prompt + global gdb_prompt if [runto marker1] then { gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2" @@ -383,14 +383,14 @@ proc test_stepping {} { default { fail "finish from marker1" ; return } } expect { - -re "marker1 \\(\\);.*$prompt $" { + -re "marker1 \\(\\);.*$gdb_prompt $" { send_gdb "step\n" exp_continue } - -re "func1 \\(\\);.*$prompt $" { + -re "func1 \\(\\);.*$gdb_prompt $" { pass "finish from marker1" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "finish from marker1" } default { fail "finish from marker1" ; return } @@ -411,14 +411,14 @@ proc test_stepping {} { gdb_test "until" "ival3 = count.*" "until to ival3 assignment" send_gdb "until\n" expect { - -re "(for \\(count = 0|\}).*$prompt $" { + -re "(for \\(count = 0|\}).*$gdb_prompt $" { gdb_test "until" "ival1 = count; /. Outside loop ./" \ "until out of loop" } - -re "ival1 = count; /. Outside loop ./.*$prompt $" { + -re "ival1 = count; /. Outside loop ./.*$gdb_prompt $" { pass "until out of loop" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "until out of loop" } default { fail "until out of loop" ; return } @@ -430,7 +430,7 @@ proc test_stepping {} { # Test stepping and other mundane operations with watchpoints enabled proc test_watchpoint_triggered_in_syscall {} { - global prompt + global gdb_prompt global noinferiorio global noresults @@ -468,7 +468,7 @@ proc test_watchpoint_triggered_in_syscall {} { -re ".*\[Ww\]atchpoint.*buf\\\[1\\\].*Old value = 0.*New value = 50\[^\n\]*\n" { set x [expr $x+1] ; exp_continue } -re ".*\[Ww\]atchpoint.*buf\\\[2\\\].*Old value = 0.*New value = 51\[^\n\]*\n" { set x [expr $x+1] ; exp_continue } -re ".*\[Ww\]atchpoint.*buf\\\[3\\\].*Old value = 0.*New value = 10\[^\n\]*\n" { set x [expr $x+1] ; exp_continue } - -re ".*$prompt $" { pass "sent 123" } + -re ".*$gdb_prompt $" { pass "sent 123" } timeout { fail "sent 123 (timeout)" } } @@ -476,30 +476,30 @@ proc test_watchpoint_triggered_in_syscall {} { # should have printed. send_gdb "print buf\[0\]\n" expect { - -re ".*= 49.*$prompt $" { set y [expr $y+1]; pass "print buf\[0\]"} - -re ".*= 0.*$prompt $" { pass "print buf\[0\]"} - -re ".*$prompt $" { fail "print buf\[0\]"} + -re ".*= 49.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[0\]"} + -re ".*= 0.*$gdb_prompt $" { pass "print buf\[0\]"} + -re ".*$gdb_prompt $" { fail "print buf\[0\]"} default { fail "print buf\[0\]"} } send_gdb "print buf\[1\]\n" expect { - -re ".*= 50.*$prompt $" { set y [expr $y+1]; pass "print buf\[1\]"} - -re ".*= 0.*$prompt $" { pass "print buf\[1\]"} - -re ".*$prompt $" { fail "print buf\[1\]"} + -re ".*= 50.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[1\]"} + -re ".*= 0.*$gdb_prompt $" { pass "print buf\[1\]"} + -re ".*$gdb_prompt $" { fail "print buf\[1\]"} default { fail "print buf\[1\]"} } send_gdb "print buf\[2\]\n" expect { - -re ".*= 51.*$prompt $" { set y [expr $y+1]; pass "print buf\[2\]"} - -re ".*= 0.*$prompt $" { pass "print buf\[2\]"} - -re ".*$prompt $" { fail "print buf\[2\]"} + -re ".*= 51.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[2\]"} + -re ".*= 0.*$gdb_prompt $" { pass "print buf\[2\]"} + -re ".*$gdb_prompt $" { fail "print buf\[2\]"} default { fail "print buf\[2\]"} } send_gdb "print buf\[3\]\n" expect { - -re ".*= 10.*$prompt $" { set y [expr $y+1]; pass "print buf\[3\]"} - -re ".*= 0.*$prompt $" { pass "print buf\[3\]"} - -re ".*$prompt $" { fail "print buf\[3\]" } + -re ".*= 10.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[3\]"} + -re ".*= 0.*$gdb_prompt $" { pass "print buf\[3\]"} + -re ".*$gdb_prompt $" { fail "print buf\[3\]" } default { fail "print buf\[3\]" } } @@ -525,7 +525,7 @@ proc test_watchpoint_triggered_in_syscall {} { # itself changes. Should add some more complicated stuff here. proc test_complex_watchpoint {} { - global prompt + global gdb_prompt global noresults if [runto marker4] then { diff --git a/gdb/testsuite/gdb.chill/builtins.exp b/gdb/testsuite/gdb.chill/builtins.exp index 1379a84..8597208 100644 --- a/gdb/testsuite/gdb.chill/builtins.exp +++ b/gdb/testsuite/gdb.chill/builtins.exp @@ -37,26 +37,26 @@ if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" gdb_load $binfile send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break xx_\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -65,7 +65,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -90,7 +90,7 @@ proc set_lang_chill {} { # Third one is an optional message to be printed proc test_print_accept { args } { - global prompt + global gdb_prompt global passcount global verbose diff --git a/gdb/testsuite/gdb.chill/callch.exp b/gdb/testsuite/gdb.chill/callch.exp index 4fe4e65..5cbf7fa 100644 --- a/gdb/testsuite/gdb.chill/callch.exp +++ b/gdb/testsuite/gdb.chill/callch.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 @@ -49,7 +49,7 @@ proc do_tests {} { send_gdb "set language chill\n" ; gdb_test "break callch.ch:48 "" - send_gdb "run\n"; expect -re "Breakpoint .*callch.ch:48.*$prompt $" + send_gdb "run\n"; expect -re "Breakpoint .*callch.ch:48.*$gdb_prompt $" gdb_test {set fred(10, i)} {a is '10'; b is '12'.} gdb_test_exact "call klaus()" {here's klaus calling.} gdb_test_exact "call fred()" {too few arguments in function call} diff --git a/gdb/testsuite/gdb.chill/chexp.exp b/gdb/testsuite/gdb.chill/chexp.exp index 9961b82..bdc100d 100644 --- a/gdb/testsuite/gdb.chill/chexp.exp +++ b/gdb/testsuite/gdb.chill/chexp.exp @@ -30,21 +30,21 @@ set bug_id 0 # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" return 1 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -56,7 +56,7 @@ proc set_lang_chill {} { } proc test_integer_literals_accepted {} { - global prompt + global gdb_prompt # Test various decimal values. @@ -115,7 +115,7 @@ proc test_integer_literals_accepted {} { } proc test_character_literals_accepted {} { - global prompt + global gdb_prompt # Test various decimal values. @@ -132,7 +132,7 @@ proc test_character_literals_accepted {} { } proc test_integer_literals_rejected {} { - global prompt + global gdb_prompt # These are valid integer literals in Z.200, but not GNU-Chill. @@ -177,7 +177,7 @@ proc test_integer_literals_rejected {} { } proc test_boolean_literals_accepted {} { - global prompt + global gdb_prompt # Test the only possible values for a boolean, TRUE and FALSE. @@ -186,7 +186,7 @@ proc test_boolean_literals_accepted {} { } proc test_float_literals_accepted {} { - global prompt + global gdb_prompt # Test various floating point formats @@ -246,7 +246,7 @@ proc test_float_literals_accepted {} { } proc test_convenience_variables {} { - global prompt + global gdb_prompt gdb_test "set \$foo := 101" " := 101\[\r\]*" \ "Set a new convenience variable" @@ -277,7 +277,7 @@ proc test_convenience_variables {} { } proc test_value_history {} { - global prompt + global gdb_prompt gdb_test "print 101" "\\\$1 = 101" \ "Set value-history\[1\] using \$1" @@ -325,7 +325,7 @@ proc test_value_history {} { } proc test_arithmetic_expressions {} { - global prompt + global gdb_prompt # Test unary minus with various operands diff --git a/gdb/testsuite/gdb.chill/chillvars.exp b/gdb/testsuite/gdb.chill/chillvars.exp index 05d20d5..dd925e4 100644 --- a/gdb/testsuite/gdb.chill/chillvars.exp +++ b/gdb/testsuite/gdb.chill/chillvars.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/enum.exp b/gdb/testsuite/gdb.chill/enum.exp index faec871..d5ec0e9 100644 --- a/gdb/testsuite/gdb.chill/enum.exp +++ b/gdb/testsuite/gdb.chill/enum.exp @@ -38,7 +38,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -46,7 +46,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } @@ -69,7 +69,7 @@ if ![set_lang_chill] then { runto hugo_ send_gdb "set var \$i := d\n" - expect -re ".*$prompt $" + expect -re ".*$gdb_prompt $" gdb_test "print \$i" { = d} gdb_test "print size (\$i)" { = 1} gdb_test "print b+c" { = 3} diff --git a/gdb/testsuite/gdb.chill/extstruct.exp b/gdb/testsuite/gdb.chill/extstruct.exp index 204daee..c175b6e 100644 --- a/gdb/testsuite/gdb.chill/extstruct.exp +++ b/gdb/testsuite/gdb.chill/extstruct.exp @@ -42,7 +42,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/gch1041.exp b/gdb/testsuite/gdb.chill/gch1041.exp index c033cef..3b035ab 100644 --- a/gdb/testsuite/gdb.chill/gch1041.exp +++ b/gdb/testsuite/gdb.chill/gch1041.exp @@ -39,7 +39,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -47,7 +47,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } diff --git a/gdb/testsuite/gdb.chill/gch1272.exp b/gdb/testsuite/gdb.chill/gch1272.exp index eb83c60..3377c2d 100644 --- a/gdb/testsuite/gdb.chill/gch1272.exp +++ b/gdb/testsuite/gdb.chill/gch1272.exp @@ -38,7 +38,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -46,7 +46,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } diff --git a/gdb/testsuite/gdb.chill/gch1280.exp b/gdb/testsuite/gdb.chill/gch1280.exp index e33850c..1786ccf 100644 --- a/gdb/testsuite/gdb.chill/gch1280.exp +++ b/gdb/testsuite/gdb.chill/gch1280.exp @@ -38,7 +38,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -46,7 +46,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } diff --git a/gdb/testsuite/gdb.chill/gch922.exp b/gdb/testsuite/gdb.chill/gch922.exp index 995384e..f2d023e 100644 --- a/gdb/testsuite/gdb.chill/gch922.exp +++ b/gdb/testsuite/gdb.chill/gch922.exp @@ -41,26 +41,26 @@ if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" gdb_load $binfile send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break xx_\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -69,7 +69,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -94,7 +94,7 @@ proc set_lang_chill {} { # Third one is an optional message to be printed proc test_print_accept { args } { - global prompt + global gdb_prompt global passcount global verbose @@ -112,7 +112,7 @@ proc test_print_accept { args } { proc test_chars {} { - global passcount prompt + global passcount gdb_prompt verbose "Testing Chars" set passcount 0 @@ -125,11 +125,11 @@ proc test_chars {} { gdb_test "set var a := (100)'\^(0,255)' "" test_print_accept "print a" {"\^\(0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255\)"} - send_gdb "set var a := (10)'\^(1)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\" \n" ; expect -re "$prompt $" + send_gdb "set var a := (10)'\^(1)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {"\^\(1,1,1,1,1,1,1,1,1,1\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"} - send_gdb "set var b := \"Hugo \"\"\^(3,4)\"\"Otto\^(17)\" \n" ; expect -re "$prompt $" + send_gdb "set var b := \"Hugo \"\"\^(3,4)\"\"Otto\^(17)\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print b" {"Hugo ""\^\(3,4\)""Otto\^\(17\)"} - send_gdb "set var c := (70)'b' // \"\^(2,3)Hugo \" // (70)'c' \n" ; expect -re "$prompt $" + send_gdb "set var c := (70)'b' // \"\^(2,3)Hugo \" // (70)'c' \n" ; expect -re "$gdb_prompt $" test_print_accept "print c" {'b'<repeats 70 times>//"\^\(2,3\)Hugo "//'c'<repeats 70 times>} gdb_test "set var d := '\^(199)' "" test_print_accept "print d" {'\^\(199\)'} @@ -137,21 +137,21 @@ proc test_chars {} { test_print_accept "print (10)'\^(0)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\"" {"\^\(0,0,0,0,0,0,0,0,0,0\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"} test_print_accept "print \"Jason\"\"\^(0,5)\"\"Hugo\^(10)\"" {"Jason""\^\(0,5\)""Hugo\^\(10\)"} - send_gdb "set var a := \"\" \n" ; expect -re "$prompt $" + send_gdb "set var a := \"\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {""} - send_gdb "set var a := \"\"\"\" \n" ; expect -re "$prompt $" + send_gdb "set var a := \"\"\"\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {""""} - send_gdb "set var a := \" \"\"\" \n" ; expect -re "$prompt $" + send_gdb "set var a := \" \"\"\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {" """} - send_gdb "set var a := \"\^\^\" \n" ; expect -re "$prompt $" + send_gdb "set var a := \"\^\^\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {"\^\^"} - send_gdb "set var a := \"'\" \n" ; expect -re "$prompt $" + send_gdb "set var a := \"'\" \n" ; expect -re "$gdb_prompt $" test_print_accept "print a" {"'"} } proc test_code {} { - global passcount prompt + global passcount gdb_prompt verbose "Testing Chars" set passcount 0 diff --git a/gdb/testsuite/gdb.chill/gch981.exp b/gdb/testsuite/gdb.chill/gch981.exp index 2ebefc8..361389c 100644 --- a/gdb/testsuite/gdb.chill/gch981.exp +++ b/gdb/testsuite/gdb.chill/gch981.exp @@ -41,26 +41,26 @@ if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" gdb_load $binfile send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break xx_\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -69,7 +69,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -94,7 +94,7 @@ proc set_lang_chill {} { # Third one is an optional message to be printed proc test_print_accept { args } { - global prompt + global gdb_prompt global passcount global verbose @@ -111,7 +111,7 @@ proc test_print_accept { args } { } proc test_power {} { - global passcount prompt + global passcount gdb_prompt verbose "Testing some POWERSET Stuff" set passcount 0 @@ -171,7 +171,7 @@ proc test_power {} { gdb_test "set v_power3 := \[b5:b7, b1\] "" test_print_accept "print v_power3" {\[b1, b5:b7\]} - send_gdb "set v_power4 := \[\"b\"\] \n" ; expect -re "$prompt $" + send_gdb "set v_power4 := \[\"b\"\] \n" ; expect -re "$gdb_prompt $" test_print_accept "print v_power4" {\['b':'x'\]} gdb_test "set v_power4 := \[5\] "" test_print_accept "print v_power4" {\['b':'x'\]} diff --git a/gdb/testsuite/gdb.chill/misc.exp b/gdb/testsuite/gdb.chill/misc.exp index bf5b6d3..f064adc 100644 --- a/gdb/testsuite/gdb.chill/misc.exp +++ b/gdb/testsuite/gdb.chill/misc.exp @@ -39,7 +39,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -47,7 +47,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } @@ -94,7 +94,7 @@ if ![set_lang_chill] then { gdb_test "print array () ubyte (foo)" { = \[\(0:11\): 0\]} send_gdb "set var \$i := foo\n" - expect -re ".*$prompt $" + expect -re ".*$gdb_prompt $" setup_xfail "m68*-*-hpux*" gdb_test "print/x array () byte (\$i)" { = \[\(0:11\): H'0\]} } diff --git a/gdb/testsuite/gdb.chill/powerset.exp b/gdb/testsuite/gdb.chill/powerset.exp index 9a912d6..525e03c 100644 --- a/gdb/testsuite/gdb.chill/powerset.exp +++ b/gdb/testsuite/gdb.chill/powerset.exp @@ -37,26 +37,26 @@ if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" gdb_load $binfile send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break xx_\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -65,7 +65,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -90,7 +90,7 @@ proc set_lang_chill {} { # Third one is an optional message to be printed proc test_print_accept { args } { - global prompt + global gdb_prompt global passcount global verbose diff --git a/gdb/testsuite/gdb.chill/pr-4975.exp b/gdb/testsuite/gdb.chill/pr-4975.exp index 892f1ed..b679e74 100644 --- a/gdb/testsuite/gdb.chill/pr-4975.exp +++ b/gdb/testsuite/gdb.chill/pr-4975.exp @@ -42,7 +42,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-5016.exp b/gdb/testsuite/gdb.chill/pr-5016.exp index 2a036d1..61cddf8 100644 --- a/gdb/testsuite/gdb.chill/pr-5016.exp +++ b/gdb/testsuite/gdb.chill/pr-5016.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-5020.exp b/gdb/testsuite/gdb.chill/pr-5020.exp index 777f664..0f940ea 100644 --- a/gdb/testsuite/gdb.chill/pr-5020.exp +++ b/gdb/testsuite/gdb.chill/pr-5020.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 @@ -61,7 +61,7 @@ proc do_tests {} { } proc test_pr_5020 {} { - global prompt + global gdb_prompt runto dummy_pr_5020 gdb_test_exact "print y" \ {= [('a'): [.l: 10, .b: TRUE], ('b'): [.l: 111, .b: FALSE]]} diff --git a/gdb/testsuite/gdb.chill/pr-5022.exp b/gdb/testsuite/gdb.chill/pr-5022.exp index e08c40b..d3a5435 100644 --- a/gdb/testsuite/gdb.chill/pr-5022.exp +++ b/gdb/testsuite/gdb.chill/pr-5022.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 @@ -60,7 +60,7 @@ proc do_tests {} { } proc test_pr_5022 {} { - global prompt + global gdb_prompt runto dummy_pr_5022 gdb_test "p p" " = NULL" "print NULL pointer" gdb_test "continue "" diff --git a/gdb/testsuite/gdb.chill/pr-5646.exp b/gdb/testsuite/gdb.chill/pr-5646.exp index 3ef5524..00189a0 100644 --- a/gdb/testsuite/gdb.chill/pr-5646.exp +++ b/gdb/testsuite/gdb.chill/pr-5646.exp @@ -42,7 +42,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-5984.exp b/gdb/testsuite/gdb.chill/pr-5984.exp index 5ae609c..206413e 100644 --- a/gdb/testsuite/gdb.chill/pr-5984.exp +++ b/gdb/testsuite/gdb.chill/pr-5984.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 @@ -50,7 +50,7 @@ proc do_tests {} { gdb_test "break pr-5984.ch:6 "" send_gdb "run\n"; expect -re "Breakpoint .*pr-5984.ch:6" - expect -re "$prompt $" + expect -re "$gdb_prompt $" gdb_test "next" "Jason Dark.*" "next over Jason Dark" } diff --git a/gdb/testsuite/gdb.chill/pr-6292.exp b/gdb/testsuite/gdb.chill/pr-6292.exp index 9fa6f74..1fae71a 100644 --- a/gdb/testsuite/gdb.chill/pr-6292.exp +++ b/gdb/testsuite/gdb.chill/pr-6292.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 @@ -49,7 +49,7 @@ proc do_tests {} { send_gdb "set language chill\n" ; gdb_test "break pr-6292.ch:15 "" - send_gdb "run\n"; expect -re "Breakpoint .*pr-6292.ch:15.*$prompt $" + send_gdb "run\n"; expect -re "Breakpoint .*pr-6292.ch:15.*$gdb_prompt $" gdb_test_exact "call klaus()" {here's klaus calling.} gdb_test {set fred(10, i)} {a was '10'; b was '12'.} gdb_test "print i" { = 13} "print i after call" diff --git a/gdb/testsuite/gdb.chill/pr-6632.exp b/gdb/testsuite/gdb.chill/pr-6632.exp index 5baaded..f6eb144 100644 --- a/gdb/testsuite/gdb.chill/pr-6632.exp +++ b/gdb/testsuite/gdb.chill/pr-6632.exp @@ -43,7 +43,7 @@ if { [compile "${srcfile} ${objfile2} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-8134.exp b/gdb/testsuite/gdb.chill/pr-8134.exp index 7f26991..a36e20e 100644 --- a/gdb/testsuite/gdb.chill/pr-8134.exp +++ b/gdb/testsuite/gdb.chill/pr-8134.exp @@ -43,7 +43,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-8136.exp b/gdb/testsuite/gdb.chill/pr-8136.exp index 4fc0f7d..3dadf96 100644 --- a/gdb/testsuite/gdb.chill/pr-8136.exp +++ b/gdb/testsuite/gdb.chill/pr-8136.exp @@ -42,7 +42,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-8405.exp b/gdb/testsuite/gdb.chill/pr-8405.exp index c21f961..bf9b433 100644 --- a/gdb/testsuite/gdb.chill/pr-8405.exp +++ b/gdb/testsuite/gdb.chill/pr-8405.exp @@ -24,7 +24,7 @@ if $tracelevel then { } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-8742.exp b/gdb/testsuite/gdb.chill/pr-8742.exp index 9fbd1c3..d1ce5da 100644 --- a/gdb/testsuite/gdb.chill/pr-8742.exp +++ b/gdb/testsuite/gdb.chill/pr-8742.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-8894.exp b/gdb/testsuite/gdb.chill/pr-8894.exp index 0e3ceeb..90d5671 100644 --- a/gdb/testsuite/gdb.chill/pr-8894.exp +++ b/gdb/testsuite/gdb.chill/pr-8894.exp @@ -40,7 +40,7 @@ if { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-9095.exp b/gdb/testsuite/gdb.chill/pr-9095.exp index 1a5df3e..b5263e8 100644 --- a/gdb/testsuite/gdb.chill/pr-9095.exp +++ b/gdb/testsuite/gdb.chill/pr-9095.exp @@ -24,7 +24,7 @@ if $tracelevel then { } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/pr-9946.exp b/gdb/testsuite/gdb.chill/pr-9946.exp index 1897c6a..40d73b0 100644 --- a/gdb/testsuite/gdb.chill/pr-9946.exp +++ b/gdb/testsuite/gdb.chill/pr-9946.exp @@ -39,7 +39,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" @@ -47,7 +47,7 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } diff --git a/gdb/testsuite/gdb.chill/result.exp b/gdb/testsuite/gdb.chill/result.exp index 492b007..397c1ed 100644 --- a/gdb/testsuite/gdb.chill/result.exp +++ b/gdb/testsuite/gdb.chill/result.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/string.exp b/gdb/testsuite/gdb.chill/string.exp index 794fd73..f257a2a 100644 --- a/gdb/testsuite/gdb.chill/string.exp +++ b/gdb/testsuite/gdb.chill/string.exp @@ -32,7 +32,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.chill/tests1.exp b/gdb/testsuite/gdb.chill/tests1.exp index 0109687..8a0be28 100644 --- a/gdb/testsuite/gdb.chill/tests1.exp +++ b/gdb/testsuite/gdb.chill/tests1.exp @@ -37,26 +37,26 @@ if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" # fails, then we skip the other tests. proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir verbose "loading file '$binfile'" gdb_load $binfile send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break dummyfunc\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -65,7 +65,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -90,7 +90,7 @@ proc set_lang_chill {} { # Third one is an optional message to be printed proc test_print_accept { args } { - global prompt + global gdb_prompt global passcount global verbose diff --git a/gdb/testsuite/gdb.chill/tests2.exp b/gdb/testsuite/gdb.chill/tests2.exp index 45f89b0..a162e31 100644 --- a/gdb/testsuite/gdb.chill/tests2.exp +++ b/gdb/testsuite/gdb.chill/tests2.exp @@ -45,7 +45,7 @@ if [istarget "i*86-*-sysv4*"] then { } proc set_lang_chill {} { - global prompt + global gdb_prompt global binfile objdir subdir if ![file exists $objdir/$subdir/$binfile] then { @@ -56,19 +56,19 @@ proc set_lang_chill {} { send_gdb "set language chill\n" expect { - -re ".*$prompt $" {} + -re ".*$gdb_prompt $" {} timeout { fail "set language chill (timeout)" ; return 0 } } send_gdb "show language\n" expect { - -re ".* source language is \"chill\".*$prompt $" { + -re ".* source language is \"chill\".*$gdb_prompt $" { pass "set language to \"chill\"" send_gdb "break dummyfunc\n" expect { - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { send_gdb "run\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} return 1 } timeout { @@ -77,7 +77,7 @@ proc set_lang_chill {} { } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "setting language to \"chill\"" return 0 } @@ -90,7 +90,7 @@ proc set_lang_chill {} { # checks if structure was accessed correctly proc test_write { args } { - global prompt + global gdb_prompt if [llength $args]==5 then { set message [lindex $args 4] @@ -117,7 +117,7 @@ proc test_write { args } { verbose "setting var $value..." send_gdb "set var $location.m$extended := $value\n" - expect -re ".*$prompt $" {} + expect -re ".*$gdb_prompt $" {} gdb_test "print $location" \ ".*= \[\[\]\\.p1: 2863311530, \\.m: $matchval, \\.p2: 1431655765\[\]\]"\ "$message" diff --git a/gdb/testsuite/gdb.chill/tuples.exp b/gdb/testsuite/gdb.chill/tuples.exp index 639a10e..ef2a4bf 100644 --- a/gdb/testsuite/gdb.chill/tuples.exp +++ b/gdb/testsuite/gdb.chill/tuples.exp @@ -34,7 +34,7 @@ if { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } } proc do_tests {} { - global prms_id bug_id subdir objdir srcdir binfile prompt + global prms_id bug_id subdir objdir srcdir binfile gdb_prompt set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.fortran/types.exp b/gdb/testsuite/gdb.fortran/types.exp index 0c47511..4c71b80 100644 --- a/gdb/testsuite/gdb.fortran/types.exp +++ b/gdb/testsuite/gdb.fortran/types.exp @@ -30,7 +30,7 @@ set bug_id 0 # fails, then we skip the other tests. proc set_lang_fortran {} { - global prompt + global gdb_prompt if [gdb_test "set language fortran" ""] { return 0; @@ -44,7 +44,7 @@ proc set_lang_fortran {} { } proc test_integer_literal_types_accepted {} { - global prompt + global gdb_prompt # Test various decimal values. @@ -52,7 +52,7 @@ proc test_integer_literal_types_accepted {} { } proc test_character_literal_types_accepted {} { - global prompt + global gdb_prompt # Test various character values. @@ -60,13 +60,13 @@ proc test_character_literal_types_accepted {} { } proc test_integer_literal_types_rejected {} { - global prompt + global gdb_prompt test_print_reject "pt _" } proc test_logical_literal_types_accepted {} { - global prompt + global gdb_prompt # Test the only possible values for a logical, TRUE and FALSE. @@ -75,7 +75,7 @@ proc test_logical_literal_types_accepted {} { } proc test_float_literal_types_accepted {} { - global prompt + global gdb_prompt # Test various floating point formats diff --git a/gdb/testsuite/gdb.stabs/weird.exp b/gdb/testsuite/gdb.stabs/weird.exp index b1c750c..047bae8 100644 --- a/gdb/testsuite/gdb.stabs/weird.exp +++ b/gdb/testsuite/gdb.stabs/weird.exp @@ -20,7 +20,7 @@ set bug_id 0 proc do_tests {} { global binfile - global prompt + global gdb_prompt # Mips/alpha targets that use gcc with mips-tfile put out the stabs # assembler directives embedded in comments. If the assembler @@ -29,10 +29,10 @@ proc do_tests {} { # Skip the rest of the stabs tests for this case. send_gdb "ptype inttype\n" expect { - -re "^ptype inttype\r*\ntype = inttype.*$prompt $" { + -re "^ptype inttype\r*\ntype = inttype.*$gdb_prompt $" { pass "stabs found" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { setup_xfail "mips-*-*" setup_xfail "alpha-*-*" fail "stabs not found" @@ -193,16 +193,16 @@ field3 = 0x77888877\}" "print struct constant" } proc print_weird_var { var } { - global prompt + global gdb_prompt # Make sure that the variable gets printed out correctly, without # any sort of warning message. send_gdb "print $var\n" expect { - -re "^print $var\r*\n.\[0-9\]* = 42.*$prompt $" { + -re "^print $var\r*\n.\[0-9\]* = 42.*$gdb_prompt $" { pass "variable $var printed properly" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "variable $var not printed properly" } timeout { fail "variable $var not printed (timeout)" } @@ -283,14 +283,14 @@ send_gdb "file $binfile\n" # that a filename won't contain a space and a warning message will. # But spaces following by backspaces aren't really spaces. expect { - -re "^file (\[^ \]| +\008)*\r*\nReading symbols from $binfile\.\.\.done\.\r*\n$prompt $" { + -re "^file (\[^ \]| +\008)*\r*\nReading symbols from $binfile\.\.\.done\.\r*\n$gdb_prompt $" { pass "weirdx.o read without error" } -re "A program is being debugged already. Kill it\? \(y or n\)" { send_gdb "y\n" exp_continue } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "Errors reading weirdx.o" } timeout { diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index 828ef12..dc203ca 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -55,9 +55,9 @@ verbose "using GDBFLAGS = $GDBFLAGS" 2 # The variable prompt is a regexp which matches the gdb prompt. Set it if it # is not already set. -global prompt +global gdb_prompt if ![info exists prompt] then { - set prompt "\[(\]gdb\[)\]" + set gdb_prompt "\[(\]gdb\[)\]" } if ![info exists noargs] then { @@ -82,7 +82,7 @@ if ![info exists noresults] then { proc default_gdb_version {} { global GDB global GDBFLAGS - global prompt + global gdb_prompt set fileid [open "gdb_cmd" w]; puts $fileid "q"; close $fileid; @@ -111,7 +111,7 @@ proc gdb_version { } { proc gdb_unload {} { global verbose global GDB - global prompt + global gdb_prompt send_gdb "file\n" expect { -re "No exec file now.*\r" { exp_continue } @@ -125,7 +125,7 @@ proc gdb_unload {} { send_gdb "y\n" exp_continue } - -re "$prompt $" {} + -re "$gdb_prompt $" {} timeout { perror "couldn't unload file in $GDB (timed out)." return -1 @@ -140,7 +140,7 @@ proc gdb_unload {} { # proc delete_breakpoints {} { - global prompt + global gdb_prompt global gdb_spawn_id send_gdb "delete breakpoints\n" @@ -149,14 +149,14 @@ proc delete_breakpoints {} { send_gdb "y\n"; exp_continue } - -i $gdb_spawn_id -re ".*$prompt $" { # This happens if there were no breakpoints + -i $gdb_spawn_id -re ".*$gdb_prompt $" { # This happens if there were no breakpoints } -i $gdb_spawn_id timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return } } send_gdb "info breakpoints\n" expect { - -i $gdb_spawn_id -re "No breakpoints or watchpoints..*$prompt $" {} - -i $gdb_spawn_id -re ".*$prompt $" { perror "breakpoints not deleted" ; return } + -i $gdb_spawn_id -re "No breakpoints or watchpoints..*$gdb_prompt $" {} + -i $gdb_spawn_id -re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return } -i $gdb_spawn_id -re "Delete all breakpoints.*or n.*$" { send_gdb "y\n"; exp_continue @@ -174,7 +174,7 @@ proc delete_breakpoints {} { # elsewhere. # proc gdb_run_cmd {args} { - global prompt + global gdb_prompt global gdb_spawn_id set spawn_id $gdb_spawn_id @@ -185,12 +185,12 @@ proc gdb_run_cmd {args} { -re "Line.* Jump anyway.*y or n. $" { send_gdb "y\n" expect { - -re "Continuing.*$prompt $" {} + -re "Continuing.*$gdb_prompt $" {} timeout { perror "Jump to start() failed (timeout)"; return } } } - -re "No symbol.*context.*$prompt $" {} - -re "The program is not being run.*$prompt $" { + -re "No symbol.*context.*$gdb_prompt $" {} + -re "The program is not being run.*$gdb_prompt $" { gdb_load ""; } timeout { perror "Jump to start() failed (timeout)"; return } @@ -210,7 +210,7 @@ proc gdb_run_cmd {args} { } proc gdb_breakpoint { function } { - global prompt + global gdb_prompt global decimal global gdb_spawn_id @@ -219,10 +219,10 @@ proc gdb_breakpoint { function } { send_gdb "break $function\n" # The first two regexps are what we get with -g, the third is without -g. expect { - -re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$prompt $" {} - -re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$prompt $" {} - -re "Breakpoint \[0-9\]* at .*$prompt $" {} - -re "$prompt $" { fail "setting breakpoint at $function" ; return 0 } + -re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {} + -re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {} + -re "Breakpoint \[0-9\]* at .*$gdb_prompt $" {} + -re "$gdb_prompt $" { fail "setting breakpoint at $function" ; return 0 } timeout { fail "setting breakpoint at $function (timeout)" ; return 0 } } return 1; @@ -235,7 +235,7 @@ proc gdb_breakpoint { function } { # single quoted C++ function specifier. proc runto { function } { - global prompt + global gdb_prompt global decimal global gdb_spawn_id @@ -252,13 +252,13 @@ proc runto { function } { # the "at foo.c:36" output we get with -g. # the "in func" output we get without -g. expect { - -re "Break.* at .*:$decimal.*$prompt $" { + -re "Break.* at .*:$decimal.*$gdb_prompt $" { return 1 } - -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in $function.*$prompt $" { + -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in $function.*$gdb_prompt $" { return 1 } - -re "$prompt $" { + -re "$gdb_prompt $" { fail "running to $function in runto" return 0 } @@ -277,7 +277,7 @@ proc runto { function } { # breakpoint() and just step out of the function. # proc runto_main {} { - global prompt + global gdb_prompt global decimal if ![target_info exists gdb_stub] { @@ -289,8 +289,8 @@ proc runto_main {} { send_gdb "step\n" # if use stubs step out of the breakpoint() function. expect { - -re "main.* at .*$prompt $" {} - -re "_start.*$prompt $" {} + -re "main.* at .*$gdb_prompt $" {} + -re "_start.*$gdb_prompt $" {} timeout { fail "single step at breakpoint() (timeout)" ; return 0 } } return 1 @@ -314,7 +314,7 @@ proc runto_main {} { # proc gdb_test { args } { global verbose - global prompt + global gdb_prompt global GDB global expect_out upvar timeout timeout @@ -346,7 +346,7 @@ proc gdb_test { args } { } expect { - -re ".*Ending remote debugging.*$prompt$" { + -re ".*Ending remote debugging.*$gdb_prompt$" { if ![isnative] then { warning "Can`t communicate to remote target." } @@ -354,7 +354,7 @@ proc gdb_test { args } { gdb_start set result -1 } - -re "\[\r\n\]*$pattern\[\r\n\]+$prompt $" { + -re "\[\r\n\]*$pattern\[\r\n\]+$gdb_prompt $" { if ![string match "" $message] then { pass "$message" } @@ -364,15 +364,15 @@ proc gdb_test { args } { send_gdb "$response_string\n"; exp_continue; } - -re "Undefined command:.*$prompt" { + -re "Undefined command:.*$gdb_prompt" { perror "Undefined command \"$command\"." set result 1 } - -re "Ambiguous command.*$prompt $" { + -re "Ambiguous command.*$gdb_prompt $" { perror "\"$command\" is not a unique command name." set result 1 } - -re ".*Program exited with code \[0-9\]+.*$prompt $" { + -re ".*Program exited with code \[0-9\]+.*$gdb_prompt $" { if ![string match "" $message] then { set errmsg "$message: the program exited" } else { @@ -381,7 +381,7 @@ proc gdb_test { args } { fail "$errmsg" return -1 } - -re "The program is not being run.*$prompt $" { + -re "The program is not being run.*$gdb_prompt $" { if ![string match "" $message] then { set errmsg "$message: the program is no longer running" } else { @@ -390,7 +390,7 @@ proc gdb_test { args } { fail "$errmsg" return -1 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { if ![string match "" $message] then { fail "$message" } @@ -428,7 +428,7 @@ proc gdb_test { args } { # as well. proc test_print_reject { args } { - global prompt + global gdb_prompt global verbose if [llength $args]==2 then { @@ -443,39 +443,39 @@ proc test_print_reject { args } { } send_gdb "$sendthis\n" expect { - -re ".*A .* in expression.*\\.*$prompt $" { + -re ".*A .* in expression.*\\.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*Invalid syntax in expression.*$prompt $" { + -re ".*Invalid syntax in expression.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*Junk after end of expression.*$prompt $" { + -re ".*Junk after end of expression.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*Invalid number.*$prompt $" { + -re ".*Invalid number.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*Invalid character constant.*$prompt $" { + -re ".*Invalid character constant.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*No symbol table is loaded.*$prompt $" { + -re ".*No symbol table is loaded.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*No symbol .* in current context.*$prompt $" { + -re ".*No symbol .* in current context.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*$expectthis.*$prompt $" { + -re ".*$expectthis.*$gdb_prompt $" { pass "reject $sendthis" return 1 } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { fail "reject $sendthis" return 1 } @@ -504,7 +504,7 @@ proc gdb_test_exact { args } { set command [lindex $args 0] # This applies a special meaning to a null string pattern. Without - # this, "$pattern\r\n$prompt $" will match anything, including error + # this, "$pattern\r\n$gdb_prompt $" will match anything, including error # messages from commands that should have no output except a new # prompt. With this, only results of a null string will match a null # string pattern. @@ -533,7 +533,7 @@ proc gdb_test_exact { args } { } proc gdb_reinitialize_dir { subdir } { - global prompt + global gdb_prompt global gdb_spawn_id set spawn_id $gdb_spawn_id @@ -545,23 +545,23 @@ proc gdb_reinitialize_dir { subdir } { -re "Reinitialize source path to empty.*y or n. " { send_gdb "y\n" expect { - -re "Source directories searched.*$prompt $" { + -re "Source directories searched.*$gdb_prompt $" { send_gdb "dir $subdir\n" expect { - -re "Source directories searched.*$prompt $" { + -re "Source directories searched.*$gdb_prompt $" { verbose "Dir set to $subdir" } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { perror "Dir \"$subdir\" failed." } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { perror "Dir \"$subdir\" failed." } } } - -re ".*$prompt $" { + -re ".*$gdb_prompt $" { perror "Dir \"$subdir\" failed." } } @@ -618,7 +618,7 @@ proc gdb_file_cmd { arg } { global loadpath global loadfile global GDB - global prompt + global gdb_prompt upvar timeout timeout global gdb_spawn_id set spawn_id $gdb_spawn_id @@ -633,11 +633,11 @@ proc gdb_file_cmd { arg } { send_gdb "file $arg\n" expect { - -re "Reading symbols from.*done.*$prompt $" { + -re "Reading symbols from.*done.*$gdb_prompt $" { verbose "\t\tLoaded $arg into the $GDB" return 0 } - -re "has no symbol-table.*$prompt $" { + -re "has no symbol-table.*$gdb_prompt $" { perror "$arg wasn't compiled with \"-g\"" return -1 } @@ -649,7 +649,7 @@ proc gdb_file_cmd { arg } { -re "Load new symbol table from \".*\".*y or n. $" { send_gdb "y\n" expect { - -re "Reading symbols from.*done.*$prompt $" { + -re "Reading symbols from.*done.*$gdb_prompt $" { verbose "\t\tLoaded $arg with new symbol table into $GDB" return 0 } @@ -659,11 +659,11 @@ proc gdb_file_cmd { arg } { } } } - -re ".*No such file or directory.*$prompt $" { + -re ".*No such file or directory.*$gdb_prompt $" { perror "($arg) No such file or directory\n" return -1 } - -re "$prompt $" { + -re "$gdb_prompt $" { perror "couldn't load $arg into $GDB." return -1 } @@ -692,7 +692,7 @@ proc default_gdb_start { } { global verbose global GDB global GDBFLAGS - global prompt + global gdb_prompt global timeout global gdb_spawn_id global spawn_id @@ -717,10 +717,10 @@ proc default_gdb_start { } { verbose $shell_id set timeout 10 expect { - -i $shell_id -re ".*\[\r\n\]$prompt $" { + -i $shell_id -re ".*\[\r\n\]$gdb_prompt $" { verbose "GDB initialized." } - -i $shell_id -re "$prompt $" { + -i $shell_id -re "$gdb_prompt $" { perror "GDB never initialized." set timeout $oldtimeout verbose "Timeout restored to $timeout seconds" 2 @@ -740,7 +740,7 @@ proc default_gdb_start { } { # force the height to "unlimited", so no pagers get used send_gdb "set height 0\n" expect { - -i $shell_id -re ".*$prompt $" { + -i $shell_id -re ".*$gdb_prompt $" { verbose "Setting height to 0." 2 } -i $shell_id timeout { @@ -750,7 +750,7 @@ proc default_gdb_start { } { # force the width to "unlimited", so no wraparound occurs send_gdb "set width 0\n" expect { - -i $shell_id -re ".*$prompt $" { + -i $shell_id -re ".*$gdb_prompt $" { verbose "Setting width to 0." 2 } -i $shell_id timeout { |