diff options
Diffstat (limited to 'gdb')
| -rw-r--r-- | gdb/ChangeLog | 8 | ||||
| -rw-r--r-- | gdb/config/i386/linux.mh | 4 | ||||
| -rw-r--r-- | gdb/config/i386/nm-linux.h | 20 | ||||
| -rw-r--r-- | gdb/lin-lwp.c | 1048 | ||||
| -rw-r--r-- | gdb/proc-service.c | 333 | ||||
| -rw-r--r-- | gdb/thread-db.c | 992 |
6 files changed, 2400 insertions, 5 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 4100ea9..a2b241a 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,13 @@ 2000-09-03 Mark Kettenis <kettenis@gnu.org> + * config/i386/nm-linux.h (PREPARE_TO_PROCEED, ATTCH_LWP, + GET_THREAD_SIGNALS): New defines. + * config/i386/linux.mh (NATDEPFILES): Remove lin-thread.o and + linux-threads.o. Add proc-service.o, thread-db.o and lin-lwp.o. + * proc-service.c: New file. + * thread-db.c: New file. + * lin-lwp.c: New file. + * gdb_assert.h: New file. * gdb_thread_db.h [HAVE_THREAD_DB_H]: Include <thread_db.h>. diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh index daaab15..06c5e80 100644 --- a/gdb/config/i386/linux.mh +++ b/gdb/config/i386/linux.mh @@ -5,7 +5,7 @@ XDEPFILES= NAT_FILE= nm-linux.h NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o \ - core-aout.o i386v-nat.o i386-linux-nat.o linux-thread.o lin-thread.o \ - i387-nat.o + core-aout.o i386v-nat.o i386-linux-nat.o i387-nat.o \ + proc-service.o thread-db.o lin-lwp.o LOADLIBES = -ldl -rdynamic diff --git a/gdb/config/i386/nm-linux.h b/gdb/config/i386/nm-linux.h index f95c6fe..daebbb7 100644 --- a/gdb/config/i386/nm-linux.h +++ b/gdb/config/i386/nm-linux.h @@ -1,5 +1,5 @@ -/* Native support for GNU/Linux, for GDB, the GNU debugger. - Copyright (C) 1986, 1987, 1989, 1992, 1996, 1998, 2000 +/* Native support for Linux/x86. + Copyright 1986, 1987, 1989, 1992, 1996, 1998, 2000 Free Software Foundation, Inc. This file is part of GDB. @@ -79,4 +79,18 @@ extern CORE_ADDR i386_stopped_by_watchpoint (int); extern int i386_insert_watchpoint (int pid, CORE_ADDR addr, int len, int rw); extern int i386_remove_watchpoint (int pid, CORE_ADDR addr, int len); -#endif /* #ifndef NM_LINUX_H */ +/* FIXME: kettenis/2000-09-03: This should be moved to ../nm-linux.h + once we have converted all Linux targets to use the new threads + stuff (without the #undef of course). */ + +extern int lin_lwp_prepare_to_proceed (void); +#undef PREPARE_TO_PROCEED +#define PREPARE_TO_PROCEED(select_it) lin_lwp_prepare_to_proceed () + +extern void lin_lwp_attach_lwp (int pid, int verbose); +#define ATTACH_LWP(pid, verbose) lin_lwp_attach_lwp ((pid), (verbose)) + +extern void lin_thread_get_thread_signals (sigset_t *mask); +#define GET_THREAD_SIGNALS(mask) lin_thread_get_thread_signals (mask) + +#endif /* nm_linux.h */ diff --git a/gdb/lin-lwp.c b/gdb/lin-lwp.c new file mode 100644 index 0000000..3b0812e --- /dev/null +++ b/gdb/lin-lwp.c @@ -0,0 +1,1048 @@ +/* Multi-threaded debugging support for Linux (LWP layer). + Copyright 2000 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#include "defs.h" + +#include "gdb_assert.h" +#include <errno.h> +#include <signal.h> +#include <sys/ptrace.h> +#include "gdb_wait.h" + +#include "gdbthread.h" +#include "inferior.h" +#include "target.h" + +#define DEBUG 1 + +#if DEBUG +extern const char *strsignal (int sig); +#endif + +/* On Linux there are no real LWP's. The closest thing to LWP's are + processes sharing the same VM space. A multi-threaded process is + basically a group of such processes. However, such a grouping is + almost entirely a user-space issue; the kernel doesn't enforce such + a grouping at all (this might change in the future). In general, + we'll rely on the threads library (i.e. the LinuxThreads library) + to provide such a grouping. + + It is perfectly well possible to write a multi-threaded application + without the assistance of a threads library, by using the clone + system call directly. This module should be able to give some + rudimentary support for debugging such applications if developers + specify the CLONE_PTRACE flag in the clone system call, and are + using Linux 2.4 or above. + + Note that there are some peculiarities in Linux that affect this + code: + + - In general one should specify the __WCLONE flag to waitpid in + order to make it report events for any of the cloned processes. + However, if a cloned process has exited the exit status is only + reported if the __WCLONE flag is absent. + + - When a traced, cloned process exits and is waited for by the + debugger, the kernel reassigns it to the origional parent and + keeps it around as a "zombie". Somehow, the LinuxThreads library + doesn't notice this, which leads to the "zombie problem": When + debugged a multi-threaded process that spawns a lot of threads + will run out of processes, even if the threads exit, because the + "zombies" stay around. */ + +/* Structure describing a LWP. */ +struct lwp_info +{ + /* The process id of the LWP. This is a combination of the LWP id + and overall process id. */ + int pid; + + /* Non-zero if we sent this LWP a SIGSTOP (but the LWP didn't report + it back yet). */ + int signalled; + + /* Non-zero if this LWP is stopped. */ + int stopped; + + /* If non-zero, a pending wait status. */ + int status; + + /* Non-zero if we were stepping this LWP. */ + int step; + + /* Next LWP in list. */ + struct lwp_info *next; +}; + +/* List of known LWPs. */ +static struct lwp_info *lwp_list; + +/* Number of LWPs in the list. */ +static int num_lwps; + +/* Non-zero if we're running in "threaded" mode. */ +static int threaded; + + +#ifndef TIDGET +#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16) +#define PIDGET(PID) (((PID) & 0xffff)) +#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16)) +#endif + +#define THREAD_FLAG 0x80000000 +#define is_lwp(pid) (((pid) & THREAD_FLAG) == 0 && TIDGET (pid)) +#define GET_LWP(pid) TIDGET (pid) +#define GET_PID(pid) PIDGET (pid) +#define BUILD_LWP(tid, pid) MERGEPID (pid, tid) + +#define is_cloned(pid) (GET_LWP (pid) != GET_PID (pid)) + +/* If the last reported event was a SIGTRAP, this variable is set to + the process id of the LWP/thread that got it. */ +int trap_pid; + + +/* This module's target-specific operations. */ +static struct target_ops lin_lwp_ops; + +/* The standard child operations. */ +extern struct target_ops child_ops; + +/* Signal mask for use with sigsuspend in lin_lwp_wait, initialized in + _initialize_lin_lwp. */ +static sigset_t suspend_mask; + + +/* Prototypes for local functions. */ +static void lin_lwp_mourn_inferior (void); + + +/* Initialize the list of LWPs. */ + +static void +init_lwp_list (void) +{ + struct lwp_info *lp, *lpnext; + + for (lp = lwp_list; lp; lp = lpnext) + { + lpnext = lp->next; + free (lp); + } + + lwp_list = NULL; + num_lwps = 0; + threaded = 0; +} + +/* Add the LWP specified by PID to the list. If this causes the + number of LWPs to become larger than one, go into "threaded" mode. + Return a pointer to the structure describing the new LWP. */ + +static struct lwp_info * +add_lwp (int pid) +{ + struct lwp_info *lp; + + gdb_assert (is_lwp (pid)); + + lp = (struct lwp_info *) xmalloc (sizeof (struct lwp_info)); + + memset (lp, 0, sizeof (struct lwp_info)); + + lp->pid = pid; + + lp->next = lwp_list; + lwp_list = lp; + if (++num_lwps > 1) + threaded = 1; + + return lp; +} + +/* Remove the LWP specified by PID from the list. */ + +static void +delete_lwp (int pid) +{ + struct lwp_info *lp, *lpprev; + + lpprev = NULL; + + for (lp = lwp_list; lp; lpprev = lp, lp = lp->next) + if (lp->pid == pid) + break; + + if (!lp) + return; + + /* We don't go back to "non-threaded" mode if the number of threads + becomes less than two. */ + num_lwps--; + + if (lpprev) + lpprev->next = lp->next; + else + lwp_list = lp->next; + + free (lp); +} + +/* Return a pointer to the structure describing the LWP corresponding + to PID. If no corresponding LWP could be found, return NULL. */ + +static struct lwp_info * +find_lwp_pid (int pid) +{ + struct lwp_info *lp; + + if (is_lwp (pid)) + pid = GET_LWP (pid); + + for (lp = lwp_list; lp; lp = lp->next) + if (pid == GET_LWP (lp->pid)) + return lp; + + return NULL; +} + +/* Call CALLBACK with its second argument set to DATA for every LWP in + the list. If CALLBACK returns 1 for a particular LWP, return a + pointer to the structure describing that LWP immediately. + Otherwise return NULL. */ + +struct lwp_info * +iterate_over_lwps (int (*callback) (struct lwp_info *, void *), void *data) +{ + struct lwp_info *lp; + + for (lp = lwp_list; lp; lp = lp->next) + if ((*callback) (lp, data)) + return lp; + + return NULL; +} + + +/* Helper functions. */ + +static void +restore_inferior_pid (void *arg) +{ + int *saved_pid_ptr = arg; + inferior_pid = *saved_pid_ptr; + free (arg); +} + +static struct cleanup * +save_inferior_pid (void) +{ + int *saved_pid_ptr; + + saved_pid_ptr = xmalloc (sizeof (int)); + *saved_pid_ptr = inferior_pid; + return make_cleanup (restore_inferior_pid, saved_pid_ptr); +} + + +/* Implementation of the PREPARE_TO_PROCEED hook for the Linux LWP layer. */ + +int +lin_lwp_prepare_to_proceed (void) +{ + if (trap_pid && inferior_pid != trap_pid) + { + /* Switched over from TRAP_PID. */ + CORE_ADDR stop_pc = read_pc (); + CORE_ADDR trap_pc; + + /* Avoid switching where it wouldn't do any good, i.e. if both + threads are at the same breakpoint. */ + trap_pc = read_pc_pid (trap_pid); + if (trap_pc != stop_pc && breakpoint_here_p (trap_pc)) + { + /* User hasn't deleted the breakpoint. Return non-zero, and + switch back to TRAP_PID. */ + inferior_pid = trap_pid; + + /* FIXME: Is this stuff really necessary? */ + flush_cached_frames (); + registers_changed (); + + return 1; + } + } + + return 0; +} + + +#if 0 +static void +lin_lwp_open (char *args, int from_tty) +{ + push_target (&lin_lwp_ops); +} +#endif + +/* Attach to the LWP specified by PID. If VERBOSE is non-zero, print + a message telling the user that a new LWP has been added to the + process. */ + +void +lin_lwp_attach_lwp (int pid, int verbose) +{ + struct lwp_info *lp; + + gdb_assert (is_lwp (pid)); + + if (verbose) + printf_filtered ("[New %s]\n", target_pid_to_str (pid)); + + if (ptrace (PTRACE_ATTACH, GET_LWP (pid), 0, 0) < 0) + error ("Can't attach %s: %s", target_pid_to_str (pid), strerror (errno)); + + lp = add_lwp (pid); + lp->signalled = 1; +} + +static void +lin_lwp_attach (char *args, int from_tty) +{ + /* FIXME: We should probably accept a list of process id's, and + attach all of them. */ + error("Not implemented yet"); +} + +static void +lin_lwp_detach (char *args, int from_tty) +{ + /* FIXME: Provide implementation when we implement lin_lwp_attach. */ + error ("Not implemented yet"); +} + + +struct private_thread_info +{ + int lwpid; +}; + +/* Return non-zero if TP corresponds to the LWP specified by DATA + (which is assumed to be a pointer to a `struct lwp_info'. */ + +static int +find_lwp_callback (struct thread_info *tp, void *data) +{ + struct lwp_info *lp = data; + + if (tp->private->lwpid == GET_LWP (lp->pid)) + return 1; + + return 0; +} + +/* Resume LP. */ + +static int +resume_callback (struct lwp_info *lp, void *data) +{ + if (lp->stopped && lp->status == 0) + { + struct thread_info *tp; + +#if 1 + /* FIXME: kettenis/2000-08-26: This should really be handled + properly by core GDB. */ + + tp = find_thread_pid (lp->pid); + if (tp == NULL) + tp = iterate_over_threads (find_lwp_callback, lp); + gdb_assert (tp); + + /* If we were previously stepping the thread, and now continue + the thread we must invalidate the stepping range. However, + if there is a step_resume breakpoint for this thread, we must + preserve the stepping range to make it possible to continue + stepping once we hit it. */ + if (tp->step_range_end && tp->step_resume_breakpoint == NULL) + { + gdb_assert (lp->step); + tp->step_range_start = tp->step_range_end = 0; + } +#endif + + child_resume (GET_LWP (lp->pid), 0, TARGET_SIGNAL_0); + lp->stopped = 0; + lp->step = 0; + } + + return 0; +} + +static void +lin_lwp_resume (int pid, int step, enum target_signal signo) +{ + struct lwp_info *lp; + int resume_all; + + /* Apparently the interpretation of PID is dependent on STEP: If + STEP is non-zero, a specific PID means `step only this process + id'. But if STEP is zero, then PID means `continue *all* + processes, but give the signal only to this one'. */ + resume_all = (pid == -1) || !step; + + /* If PID is -1, it's the current inferior that should be + handled special. */ + if (pid == -1) + pid = inferior_pid; + + lp = find_lwp_pid (pid); + if (lp) + { + pid = GET_LWP (lp->pid); + + /* Mark LWP as not stopped to prevent it from being continued by + resume_callback. */ + lp->stopped = 0; + + /* Remember if we're stepping. */ + lp->step = step; + + /* If we have a pending wait status for this thread, there is no + point in resuming the process. */ + if (lp->status) + { + /* FIXME: What should we do if we are supposed to continue + this thread with a signal? */ + gdb_assert (signo == TARGET_SIGNAL_0); + return; + } + } + + if (resume_all) + iterate_over_lwps (resume_callback, NULL); + + child_resume (pid, step, signo); +} + + +/* Send a SIGSTOP to LP. */ + +static int +stop_callback (struct lwp_info *lp, void *data) +{ + if (! lp->stopped && ! lp->signalled) + { + int ret; + + ret = kill (GET_LWP (lp->pid), SIGSTOP); + gdb_assert (ret == 0); + + lp->signalled = 1; + gdb_assert (lp->status == 0); + } + + return 0; +} + +/* Wait until LP is stopped. */ + +static int +stop_wait_callback (struct lwp_info *lp, void *data) +{ + if (! lp->stopped && lp->signalled) + { + pid_t pid; + int status; + + gdb_assert (lp->status == 0); + + pid = waitpid (GET_LWP (lp->pid), &status, + is_cloned (lp->pid) ? __WCLONE : 0); + if (pid == -1 && errno == ECHILD) + /* OK, the proccess has disappeared. We'll catch the actual + exit event in lin_lwp_wait. */ + return 0; + + gdb_assert (pid == GET_LWP (lp->pid)); + + if (WIFEXITED (status) || WIFSIGNALED (status)) + { + gdb_assert (num_lwps > 1); + gdb_assert (! is_cloned (lp->pid)); + + gdb_assert (in_thread_list (lp->pid)); + if (lp->pid != inferior_pid) + delete_thread (lp->pid); + printf_unfiltered ("[%s exited]\n", + target_pid_to_str (lp->pid)); + + delete_lwp (lp->pid); + return 0; + } + + gdb_assert (WIFSTOPPED (status)); + lp->stopped = 1; + + if (WSTOPSIG (status) != SIGSTOP) + { + if (WSTOPSIG (status) == SIGTRAP + && breakpoint_inserted_here_p (read_pc_pid (pid) + - DECR_PC_AFTER_BREAK)) + { + /* If a LWP other than the LWP that we're reporting an + event for has hit a GDB breakpoint (as opposed to + some random trap signal), then just arrange for it to + hit it again later. We don't keep the SIGTRAP status + and don't forward the SIGTRAP signal to the LWP. We + will handle the current event, eventually we will + resume all LWPs, and this one will get its breakpoint + trap again. + + If we do not do this, then we run the risk that the + user will delete or disable the breakpoint, but the + thread will have already tripped on it. */ +#if DEBUG + printf ("Tripped breakpoint at %lx in LWP %d" + " while waiting for SIGSTOP.\n", + (long) read_pc_pid (lp->pid), pid); +#endif + /* Set the PC to before the trap. */ + if (DECR_PC_AFTER_BREAK) + write_pc_pid (read_pc_pid (pid) - DECR_PC_AFTER_BREAK, pid); + } + else + { +#if DEBUG + printf ("Received %s in LWP %d while waiting for SIGSTOP.\n", + strsignal (WSTOPSIG (status)), pid); +#endif + /* The thread was stopped with a signal other than + SIGSTOP, and didn't accidentiliy trip a breakpoint. + Record the wait status. */ + lp->status = status; + } + } + else + { + /* We caught the SIGSTOP that we intended to catch, so + there's no SIGSTOP pending. */ + lp->signalled = 0; + } + } + + return 0; +} + +/* Return non-zero if LP has a wait status pending. */ + +static int +status_callback (struct lwp_info *lp, void *data) +{ + return (lp->status != 0); +} + +/* Return non-zero if LP isn't stopped. */ + +static int +running_callback (struct lwp_info *lp, void *data) +{ + return (lp->stopped == 0); +} + +static int +lin_lwp_wait (int pid, struct target_waitstatus *ourstatus) +{ + struct lwp_info *lp = NULL; + int options = 0; + int status = 0; + + retry: + + /* First check if there is a LWP with a wait status pending. */ + if (pid == -1) + { + /* Any LWP will do. */ + lp = iterate_over_lwps (status_callback, NULL); + if (lp) + { +#if DEBUG + printf ("Using pending wait status for LWP %d.\n", + GET_LWP (lp->pid)); +#endif + status = lp->status; + lp->status = 0; + } + + /* But if we don't fine one, we'll have to wait, and check both + cloned and uncloned processes. We start with the cloned + processes. */ + options = __WCLONE | WNOHANG; + } + else if (is_lwp (pid)) + { +#if DEBUG + printf ("Waiting for specific LWP %d.\n", GET_LWP (pid)); +#endif + /* We have a specific LWP to check. */ + lp = find_lwp_pid (GET_LWP (pid)); + gdb_assert (lp); + status = lp->status; + lp->status = 0; +#if DEBUG + if (status) + printf ("Using pending wait status for LWP %d.\n", + GET_LWP (lp->pid)); +#endif + + /* If we have to wait, take into account whether PID is a cloned + process or not. And we have to convert it to something that + the layer beneath us can understand. */ + options = is_cloned (lp->pid) ? __WCLONE : 0; + pid = GET_LWP (pid); + } + + if (status && lp->signalled) + { + /* A pending SIGSTOP may interfere with the normal stream of + events. In a typical case where interference is a problem, + we have a SIGSTOP signal pending for LWP A while + single-stepping it, encounter an event in LWP B, and take the + pending SIGSTOP while trying to stop LWP A. After processing + the event in LWP B, LWP A is continued, and we'll never see + the SIGTRAP associated with the last time we were + single-stepping LWP A. */ + + /* Resume the thread. It should halt immediately returning the + pending SIGSTOP. */ + child_resume (GET_LWP (lp->pid), lp->step, TARGET_SIGNAL_0); + lp->stopped = 0; + + /* This should catch the pending SIGSTOP. */ + stop_wait_callback (lp, NULL); + } + + set_sigint_trap (); /* Causes SIGINT to be passed on to the + attached process. */ + set_sigio_trap (); + + while (status == 0) + { + pid_t lwpid; + + lwpid = waitpid (pid, &status, options); + if (lwpid > 0) + { + gdb_assert (pid == -1 || lwpid == pid); + + lp = find_lwp_pid (lwpid); + if (! lp) + { + lp = add_lwp (BUILD_LWP (lwpid, inferior_pid)); + if (threaded) + { + gdb_assert (WIFSTOPPED (status) && WSTOPSIG (status) == SIGSTOP); + lp->signalled = 1; + + if (! in_thread_list (inferior_pid)) + { + inferior_pid = BUILD_LWP (inferior_pid, inferior_pid); + add_thread (inferior_pid); + } + + add_thread (lp->pid); + printf_unfiltered ("[New %s]\n", + target_pid_to_str (lp->pid)); + } + } + + /* Make sure we don't report a TARGET_WAITKIND_EXITED or + TARGET_WAITKIND_SIGNALLED event if there are still LWP's + left in the process. */ + if ((WIFEXITED (status) || WIFSIGNALED (status)) && num_lwps > 1) + { + if (in_thread_list (lp->pid)) + { + /* Core GDB cannot deal with us deeting the current + thread. */ + if (lp->pid != inferior_pid) + delete_thread (lp->pid); + printf_unfiltered ("[%s exited]\n", + target_pid_to_str (lp->pid)); + } +#if DEBUG + printf ("%s exited.\n", target_pid_to_str (lp->pid)); +#endif + delete_lwp (lp->pid); + + /* Make sure there is at least one thread running. */ + gdb_assert (iterate_over_lwps (running_callback, NULL)); + + /* Discard the event. */ + status = 0; + continue; + } + + /* Make sure we don't report a SIGSTOP that we sent + ourselves in an attempt to stop an LWP. */ + if (lp->signalled && WIFSTOPPED (status) + && WSTOPSIG (status) == SIGSTOP) + { +#if DEBUG + printf ("Delayed SIGSTOP caught for %s.\n", + target_pid_to_str (lp->pid)); +#endif + /* This is a delayed SIGSTOP. */ + lp->signalled = 0; + + child_resume (GET_LWP (lp->pid), lp->step, TARGET_SIGNAL_0); + lp->stopped = 0; + + /* Discard the event. */ + status = 0; + continue; + } + + break; + } + + if (pid == -1) + { + /* Alternate between checking cloned and uncloned processes. */ + options ^= __WCLONE; + + /* And suspend every time we have checked both. */ + if (options & __WCLONE) + sigsuspend (&suspend_mask); + } + + /* We shouldn't end up here unless we want to try again. */ + gdb_assert (status == 0); + } + + clear_sigio_trap (); + clear_sigint_trap (); + + gdb_assert (lp); + + /* Don't report signals that GDB isn't interested in, such as + signals that are neither printed nor stopped upon. Stopping all + threads can be a bit time-consuming so if we want decent + performance with heavily multi-threaded programs, especially when + they're using a high frequency timer, we'd better avoid it if we + can. */ + + if (WIFSTOPPED (status)) + { + int signo = target_signal_from_host (WSTOPSIG (status)); + + if (signal_stop_state (signo) == 0 + && signal_print_state (signo) == 0 + && signal_pass_state (signo) == 1) + { + child_resume (GET_LWP (lp->pid), lp->step, signo); + lp->stopped = 0; + status = 0; + goto retry; + } + } + + /* This LWP is stopped now. */ + lp->stopped = 1; + + /* Now stop all other LWP's ... */ + iterate_over_lwps (stop_callback, NULL); + + /* ... and wait until all of them have reported back that they're no + longer running. */ + iterate_over_lwps (stop_wait_callback, NULL); + + /* If we're not running in "threaded" mode, we'll report the bare + process id. */ + + if (WIFSTOPPED (status) && WSTOPSIG (status) == SIGTRAP) + trap_pid = (threaded ? lp->pid : GET_LWP (lp->pid)); + else + trap_pid = 0; + + store_waitstatus (ourstatus, status); + return (threaded ? lp->pid : GET_LWP (lp->pid)); +} + +static int +kill_callback (struct lwp_info *lp, void *data) +{ + ptrace (PTRACE_KILL, GET_LWP (lp->pid), 0, 0); + return 0; +} + +static int +kill_wait_callback (struct lwp_info *lp, void *data) +{ + pid_t pid; + + /* We must make sure that there are no pending events (delayed + SIGSTOPs, pending SIGTRAPs, etc.) to make sure the current + program doesn't interfere with any following debugging session. */ + + /* For cloned processes we must check both with __WCLONE and + without, since the exit status of a cloned process isn't reported + with __WCLONE. */ + if (is_cloned (lp->pid)) + { + do + { + pid = waitpid (GET_LWP (lp->pid), NULL, __WCLONE); + } + while (pid == GET_LWP (lp->pid)); + + gdb_assert (pid == -1 && errno == ECHILD); + } + + do + { + pid = waitpid (GET_LWP (lp->pid), NULL, 0); + } + while (pid == GET_LWP (lp->pid)); + + gdb_assert (pid == -1 && errno == ECHILD); + return 0; +} + +static void +lin_lwp_kill (void) +{ + /* Kill all LWP's ... */ + iterate_over_lwps (kill_callback, NULL); + + /* ... and wait until we've flushed all events. */ + iterate_over_lwps (kill_wait_callback, NULL); + + target_mourn_inferior (); +} + +static void +lin_lwp_create_inferior (char *exec_file, char *allargs, char **env) +{ + struct target_ops *target_beneath; + + init_lwp_list (); + +#if 0 + target_beneath = find_target_beneath (&lin_lwp_ops); +#else + target_beneath = &child_ops; +#endif + target_beneath->to_create_inferior (exec_file, allargs, env); +} + +static void +lin_lwp_mourn_inferior (void) +{ + struct target_ops *target_beneath; + + init_lwp_list (); + + trap_pid = 0; + +#if 0 + target_beneath = find_target_beneath (&lin_lwp_ops); +#else + target_beneath = &child_ops; +#endif + target_beneath->to_mourn_inferior (); +} + +static void +lin_lwp_fetch_registers (int regno) +{ + struct cleanup *old_chain = save_inferior_pid (); + + if (is_lwp (inferior_pid)) + inferior_pid = GET_LWP (inferior_pid); + + fetch_inferior_registers (regno); + + do_cleanups (old_chain); +} + +static void +lin_lwp_store_registers (int regno) +{ + struct cleanup *old_chain = save_inferior_pid (); + + if (is_lwp (inferior_pid)) + inferior_pid = GET_LWP (inferior_pid); + + store_inferior_registers (regno); + + do_cleanups (old_chain); +} + +static int +lin_lwp_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, + struct target_ops *target) +{ + struct cleanup *old_chain = save_inferior_pid (); + int xfer; + + if (is_lwp (inferior_pid)) + inferior_pid = GET_LWP (inferior_pid); + + xfer = child_xfer_memory (memaddr, myaddr, len, write, target); + + do_cleanups (old_chain); + return xfer; +} + +static int +lin_lwp_thread_alive (int pid) +{ + gdb_assert (is_lwp (pid)); + + errno = 0; + ptrace (PTRACE_PEEKUSER, GET_LWP (pid), 0, 0); + if (errno) + return 0; + + return 1; +} + +static char * +lin_lwp_pid_to_str (int pid) +{ + static char buf[64]; + + if (is_lwp (pid)) + { + snprintf (buf, sizeof (buf), "LWP %d", GET_LWP (pid)); + return buf; + } + + return normal_pid_to_str (pid); +} + +static void +init_lin_lwp_ops (void) +{ +#if 0 + lin_lwp_ops.to_open = lin_lwp_open; +#endif + lin_lwp_ops.to_shortname = "lwp-layer"; + lin_lwp_ops.to_longname = "lwp-layer"; + lin_lwp_ops.to_doc = "Low level threads support (LWP layer)"; + lin_lwp_ops.to_attach = lin_lwp_attach; + lin_lwp_ops.to_detach = lin_lwp_detach; + lin_lwp_ops.to_resume = lin_lwp_resume; + lin_lwp_ops.to_wait = lin_lwp_wait; + lin_lwp_ops.to_fetch_registers = lin_lwp_fetch_registers; + lin_lwp_ops.to_store_registers = lin_lwp_store_registers; + lin_lwp_ops.to_xfer_memory = lin_lwp_xfer_memory; + lin_lwp_ops.to_kill = lin_lwp_kill; + lin_lwp_ops.to_create_inferior = lin_lwp_create_inferior; + lin_lwp_ops.to_mourn_inferior = lin_lwp_mourn_inferior; + lin_lwp_ops.to_thread_alive = lin_lwp_thread_alive; + lin_lwp_ops.to_pid_to_str = lin_lwp_pid_to_str; + lin_lwp_ops.to_stratum = thread_stratum; + lin_lwp_ops.to_has_thread_control = tc_schedlock; + lin_lwp_ops.to_magic = OPS_MAGIC; +} + +static void +sigchld_handler (int signo) +{ + /* Do nothing. The only reason for this handler is that it allows + us to use sigsuspend in lin_lwp_wait above to wait for the + arrival of a SIGCHLD. */ +} + +void +_initialize_lin_lwp (void) +{ + struct sigaction action; + sigset_t mask; + + extern void thread_db_init (struct target_ops *); + + init_lin_lwp_ops (); + add_target (&lin_lwp_ops); + thread_db_init (&lin_lwp_ops); + + action.sa_handler = sigchld_handler; + sigemptyset (&action.sa_mask); + action.sa_flags = 0; + sigaction (SIGCHLD, &action, NULL); + + /* We block SIGCHLD throughout this code ... */ + sigemptyset (&mask); + sigaddset (&mask, SIGCHLD); + sigprocmask (SIG_BLOCK, &mask, &suspend_mask); + + /* ... except during a sigsuspend. */ + sigdelset (&suspend_mask, SIGCHLD); +} + + +/* FIXME: kettenis/2000-08-26: The stuff on this page is specific to + the LinuxThreads library and therefore doesn't really belong here. */ + +/* Read variable NAME in the target and return its value if found. + Otherwise return zero. It is assumed that the type of the variable + is `int'. */ + +static int +get_signo (const char *name) +{ + struct minimal_symbol *ms; + int signo; + + ms = lookup_minimal_symbol (name, NULL, NULL); + if (ms == NULL) + return 0; + + if (target_read_memory (SYMBOL_VALUE_ADDRESS (ms), (char *) &signo, + sizeof (signo)) != 0) + return 0; + + return signo; +} + +/* Return the set of signals used by the threads library in *SET. */ + +void +lin_thread_get_thread_signals (sigset_t *set) +{ + int restart; + int cancel; + + sigemptyset (set); + + restart = get_signo ("__pthread_sig_restart"); + if (restart == 0) + return; + + cancel = get_signo ("__pthread_sig_cancel"); + if (cancel == 0) + return; + + sigaddset (set, restart); + sigaddset (set, cancel); +} diff --git a/gdb/proc-service.c b/gdb/proc-service.c new file mode 100644 index 0000000..b69207e --- /dev/null +++ b/gdb/proc-service.c @@ -0,0 +1,333 @@ +/* <proc_service.h> implementation. + Copyright 1999, 2000 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#include "defs.h" + +#include "gdb_proc_service.h" +#include <sys/procfs.h> + +#include "inferior.h" +#include "symtab.h" +#include "target.h" + +/* Prototypes for supply_gregset etc. */ +#include "gregset.h" + + +/* Fix-up some broken systems. */ + +/* The prototypes in <proc_service.h> are slightly different on older + systems. Compensate for the discrepancies. */ + +#ifdef PROC_SERVICE_IS_OLD +typedef const struct ps_prochandle *gdb_ps_prochandle_t; +typedef char *gdb_ps_read_buf_t; +typedef char *gdb_ps_write_buf_t; +typedef int gdb_ps_size_t; +#else +typedef struct ps_prochandle *gdb_ps_prochandle_t; +typedef void *gdb_ps_read_buf_t; +typedef const void *gdb_ps_write_buf_t; +typedef size_t gdb_ps_size_t; +#endif + + +/* Building process ids. */ + +#ifndef MERGEPID +#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16)) +#endif + +#define BUILD_LWP(tid, pid) MERGEPID (pid, tid) + + +/* Helper functions. */ + +static void +restore_inferior_pid (void *arg) +{ + int *saved_pid_ptr = arg; + inferior_pid = *saved_pid_ptr; + free (arg); +} + +static struct cleanup * +save_inferior_pid (void) +{ + int *saved_pid_ptr; + + saved_pid_ptr = xmalloc (sizeof (int)); + *saved_pid_ptr = inferior_pid; + return make_cleanup (restore_inferior_pid, saved_pid_ptr); +} + +/* Transfer LEN bytes of memory between BUF and address ADDR in the + process specified by PH. If WRITE, transfer them to the process, + else transfer them from the process. Returns PS_OK for success, + PS_ERR on failure. + + This is a helper function for ps_pdread, ps_pdwrite, ps_ptread and + ps_ptwrite. */ + +static ps_err_e +ps_xfer_memory (const struct ps_prochandle *ph, paddr_t addr, + char *buf, size_t len, int write) +{ + struct cleanup *old_chain = save_inferior_pid (); + int ret; + + inferior_pid = ph->pid; + + if (write) + ret = target_write_memory (addr, buf, len); + else + ret = target_read_memory (addr, buf, len); + + do_cleanups (old_chain); + + return (ret == 0 ? PS_OK : PS_ERR); +} + + +/* Stop the target process PH. */ + +ps_err_e +ps_pstop (gdb_ps_prochandle_t ph) +{ + /* The process is always stopped when under control of GDB. */ + return PS_OK; +} + +/* Resume the target process PH. */ + +ps_err_e +ps_pcontinue (gdb_ps_prochandle_t ph) +{ + /* Pretend we did successfully continue the process. GDB will take + care of it later on. */ + return PS_OK; +} + +/* Stop the lightweight process LWPID within the target process PH. */ + +ps_err_e +ps_lstop (gdb_ps_prochandle_t ph, lwpid_t lwpid) +{ + /* All lightweight processes are stopped when under control of GDB. */ + return PS_OK; +} + +/* Resume the lightweight process (LWP) LWPID within the target + process PH. */ + +ps_err_e +ps_lcontinue (gdb_ps_prochandle_t ph, lwpid_t lwpid) +{ + /* Pretend we did successfully continue LWPID. GDB will take care + of it later on. */ + return PS_OK; +} + +/* Get the size of the architecture-dependent extra state registers + for LWP LWPID within the target process PH and return it in + *XREGSIZE. */ + +ps_err_e +ps_lgetxregsize (gdb_ps_prochandle_t ph, lwpid_t lwpid, int *xregsize) +{ + /* FIXME: Not supported yet. */ + return PS_OK; +} + +/* Get the extra state registers of LWP LWPID within the target + process PH and store them in XREGSET. */ + +ps_err_e +ps_lgetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset) +{ + /* FIXME: Not supported yet. */ + return PS_OK; +} + +/* Set the extra state registers of LWP LWPID within the target + process PH from XREGSET. */ + +ps_err_e +ps_lsetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset) +{ + /* FIXME: Not supported yet. */ + return PS_OK; +} + +/* Log (additional) diognostic information. */ + +void +ps_plog (const char *fmt, ...) +{ + va_list args; + + va_start (args, fmt); + vfprintf_filtered (gdb_stderr, fmt, args); +} + +/* Search for the symbol named NAME within the object named OBJ within + the target process PH. If the symbol is found the address of the + symbol is stored in SYM_ADDR. */ + +ps_err_e +ps_pglobal_lookup (gdb_ps_prochandle_t ph, const char *obj, + const char *name, paddr_t *sym_addr) +{ + struct minimal_symbol *ms; + + /* FIXME: kettenis/2000-09-03: What should we do with OBJ? */ + ms = lookup_minimal_symbol (name, NULL, NULL); + if (ms == NULL) + return PS_NOSYM; + + *sym_addr = SYMBOL_VALUE_ADDRESS (ms); + return PS_OK; +} + +/* Read SIZE bytes from the target process PH at address ADDR and copy + them into BUF. */ + +ps_err_e +ps_pdread (gdb_ps_prochandle_t ph, paddr_t addr, + gdb_ps_read_buf_t buf, gdb_ps_size_t size) +{ + return ps_xfer_memory (ph, addr, buf, size, 0); +} + +/* Write SIZE bytes from BUF into the target process PH at address ADDR. */ + +ps_err_e +ps_pdwrite (gdb_ps_prochandle_t ph, paddr_t addr, + gdb_ps_write_buf_t buf, gdb_ps_size_t size) +{ + return ps_xfer_memory (ph, addr, (char *) buf, size, 1); +} + +/* Read SIZE bytes from the target process PH at address ADDR and copy + them into BUF. */ + +ps_err_e +ps_ptread (gdb_ps_prochandle_t ph, paddr_t addr, + gdb_ps_read_buf_t buf, gdb_ps_size_t size) +{ + return ps_xfer_memory (ph, addr, buf, size, 0); +} + +/* Write SIZE bytes from BUF into the target process PH at address ADDR. */ + +ps_err_e +ps_ptwrite (gdb_ps_prochandle_t ph, paddr_t addr, + gdb_ps_write_buf_t buf, gdb_ps_size_t size) +{ + return ps_xfer_memory (ph, addr, (char *) buf, size, 1); +} + +/* Get the general registers of LWP LWPID within the target process PH + and store them in GREGSET. */ + +ps_err_e +ps_lgetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, prgregset_t gregset) +{ + struct cleanup *old_chain = save_inferior_pid (); + + inferior_pid = BUILD_LWP (lwpid, ph->pid); + + target_fetch_registers (-1); + fill_gregset ((gdb_gregset_t *) gregset, -1); + + do_cleanups (old_chain); + return PS_OK; +} + +/* Set the general registers of LWP LWPID within the target process PH + from GREGSET. */ + +ps_err_e +ps_lsetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, const prgregset_t gregset) +{ + struct cleanup *old_chain = save_inferior_pid (); + + inferior_pid = BUILD_LWP (lwpid, ph->pid); + + /* FIXME: We should really make supply_gregset const-correct. */ + supply_gregset ((gdb_gregset_t *) gregset); + target_store_registers (-1); + + do_cleanups (old_chain); + return PS_OK; +} + +/* Get the floating-point registers of LWP LWPID within the target + process PH and store them in FPREGSET. */ + +ps_err_e +ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, + gdb_prfpregset_t *fpregset) +{ + struct cleanup *old_chain = save_inferior_pid (); + + inferior_pid = BUILD_LWP (lwpid, ph->pid); + + target_fetch_registers (-1); + fill_fpregset ((gdb_fpregset_t *) fpregset, -1); + + do_cleanups (old_chain); + return PS_OK; +} + +/* Set the floating-point registers of LWP LWPID within the target + process PH from FPREGSET. */ + +ps_err_e +ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, + const gdb_prfpregset_t *fpregset) +{ + struct cleanup *old_chain = save_inferior_pid (); + + inferior_pid = BUILD_LWP (lwpid, ph->pid); + + /* FIXME: We should really make supply_fpregset const-correct. */ + supply_fpregset ((gdb_fpregset_t *) fpregset); + target_store_registers (-1); + + do_cleanups (old_chain); + return PS_OK; +} + +/* Return overall process id of the target PH. + Special for Linux -- not used on Solaris. */ + +pid_t +ps_getpid (gdb_ps_prochandle_t ph) +{ + return ph->pid; +} + +void +_initialize_proc_service (void) +{ + /* This function solely exists to make sure this module is linked + into the final binary. */ +} diff --git a/gdb/thread-db.c b/gdb/thread-db.c new file mode 100644 index 0000000..7c3c0ae --- /dev/null +++ b/gdb/thread-db.c @@ -0,0 +1,992 @@ +/* libthread_db assisted debugging support, generic parts. + Copyright 1999, 2000 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#include "defs.h" + +#include "gdb_assert.h" +#include <dlfcn.h> +#include "gdb_proc_service.h" +#include "gdb_thread_db.h" + +#include "gdbthread.h" +#include "inferior.h" +#include "target.h" + +#ifndef LIBTHREAD_DB_SO +#define LIBTHREAD_DB_SO "libthread_db.so.1" +#endif + +/* If we're running on Linux, we must explicitly attach to any new threads. */ + +/* FIXME: There is certainly some room for improvements: + - Cache LWP ids. + - Bypass libthread_db when fetching or storing registers for + threads bound to a LWP. */ + +/* This module's target vector. */ +static struct target_ops thread_db_ops; + +/* The target vector that we call for things this module can't handle. */ +static struct target_ops *target_beneath; + +/* Pointer to the next function on the objfile event chain. */ +static void (*target_new_objfile_chain) (struct objfile *objfile); + +/* Non-zero if we're using this module's target vector. */ +static int using_thread_db; + +/* Non-zero if we have determined the signals used by the threads + library. */ +static int thread_signals; +static sigset_t thread_stop_set; +static sigset_t thread_print_set; + +/* Structure that identifies the child process for the + <proc_service.h> interface. */ +static struct ps_prochandle proc_handle; + +/* Connection to the libthread_db library. */ +static td_thragent_t *thread_agent; + +/* Pointers to the libthread_db functions. */ + +static td_err_e (*td_init_p) (void); + +static td_err_e (*td_ta_new_p) (struct ps_prochandle *ps, td_thragent_t **ta); +static td_err_e (*td_ta_map_id2thr_p) (const td_thragent_t *ta, thread_t pt, + td_thrhandle_t *__th); +static td_err_e (*td_ta_map_lwp2thr_p) (const td_thragent_t *ta, lwpid_t lwpid, + td_thrhandle_t *th); +static td_err_e (*td_ta_thr_iter_p) (const td_thragent_t *ta, + td_thr_iter_f *callback, + void *cbdata_p, td_thr_state_e state, + int ti_pri, sigset_t *ti_sigmask_p, + unsigned int ti_user_flags); +static td_err_e (*td_ta_event_addr_p) (const td_thragent_t *ta, + td_event_e event, td_notify_t *ptr); +static td_err_e (*td_ta_set_event_p) (const td_thragent_t *ta, + td_thr_events_t *event); +static td_err_e (*td_ta_event_getmsg_p) (const td_thragent_t *ta, + td_event_msg_t *msg); + +static td_err_e (*td_thr_validate_p) (const td_thrhandle_t *th); +static td_err_e (*td_thr_get_info_p) (const td_thrhandle_t *th, + td_thrinfo_t *infop); +static td_err_e (*td_thr_getfpregs_p) (const td_thrhandle_t *th, + gdb_prfpregset_t *regset); +static td_err_e (*td_thr_getgregs_p) (const td_thrhandle_t *th, + prgregset_t gregs); +static td_err_e (*td_thr_setfpregs_p) (const td_thrhandle_t *th, + const gdb_prfpregset_t *fpregs); +static td_err_e (*td_thr_setgregs_p) (const td_thrhandle_t *th, + prgregset_t gregs); +static td_err_e (*td_thr_event_enable_p) (const td_thrhandle_t *th, int event); + +/* Location of the thread creation event breakpoint. The code at this + location in the child process will be called by the pthread library + whenever a new thread is created. By setting a special breakpoint + at this location, GDB can detect when a new thread is created. We + obtain this location via the td_ta_event_addr call. */ +static CORE_ADDR td_create_bp_addr; + +/* Location of the thread death event breakpoint. */ +static CORE_ADDR td_death_bp_addr; + +/* Prototypes for local functions. */ +static int find_new_threads_callback (const td_thrhandle_t *th_p, void *data); + + +/* Building process ids. */ + +#ifndef TIDGET +#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16) +#define PIDGET(PID) (((PID) & 0xffff)) +#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16)) +#endif + +#define THREAD_FLAG 0x80000000 + +#define is_lwp(pid) (((pid) & THREAD_FLAG) == 0 && TIDGET (pid)) +#define is_thread(pid) ((pid) & THREAD_FLAG) + +#define GET_PID(pid) PIDGET (pid) +#define GET_LWP(pid) TIDGET (pid) +#define GET_THREAD(pid) TIDGET (pid) + +#define BUILD_LWP(tid, pid) MERGEPID (pid, tid) +#define BUILD_THREAD(tid, pid) (MERGEPID (pid, tid) | THREAD_FLAG) + + +struct private_thread_info +{ + /* Cached LWP id. Must come first, see lin-lwp.c. */ + lwpid_t lwpid; +}; + + +/* Helper functions. */ + +static void +restore_inferior_pid (void *arg) +{ + int *saved_pid_ptr = arg; + inferior_pid = *saved_pid_ptr; + free (arg); +} + +static struct cleanup * +save_inferior_pid (void) +{ + int *saved_pid_ptr; + + saved_pid_ptr = xmalloc (sizeof (int)); + *saved_pid_ptr = inferior_pid; + return make_cleanup (restore_inferior_pid, saved_pid_ptr); +} + + +static char * +thread_db_err_str (td_err_e err) +{ + static char buf[64]; + + switch (err) + { + case TD_OK: + return "generic 'call succeeded'"; + case TD_ERR: + return "generic error"; + case TD_NOTHR: + return "no thread to satisfy query"; + case TD_NOSV: + return "no sync handle to satisfy query"; + case TD_NOLWP: + return "no LWP to satisfy query"; + case TD_BADPH: + return "invalid process handle"; + case TD_BADTH: + return "invalid thread handle"; + case TD_BADSH: + return "invalid synchronization handle"; + case TD_BADTA: + return "invalid thread agent"; + case TD_BADKEY: + return "invalid key"; + case TD_NOMSG: + return "no event message for getmsg"; + case TD_NOFPREGS: + return "FPU register set not available"; + case TD_NOLIBTHREAD: + return "application not linked with libthread"; + case TD_NOEVENT: + return "requested event is not supported"; + case TD_NOCAPAB: + return "capability not available"; + case TD_DBERR: + return "debugger service failed"; + case TD_NOAPLIC: + return "operation not applicable to"; + case TD_NOTSD: + return "no thread-specific data for this thread"; + case TD_MALLOC: + return "malloc failed"; + case TD_PARTIALREG: + return "only part of register set was written/read"; + case TD_NOXREGS: + return "X register set not available for this thread"; + default: + snprintf (buf, sizeof (buf), "unknown thread_db error '%d'", err); + return buf; + } +} + +static char * +thread_db_state_str (td_thr_state_e state) +{ + static char buf[64]; + + switch (state) + { + case TD_THR_STOPPED: + return "stopped by debugger"; + case TD_THR_RUN: + return "runnable"; + case TD_THR_ACTIVE: + return "active"; + case TD_THR_ZOMBIE: + return "zombie"; + case TD_THR_SLEEP: + return "sleeping"; + case TD_THR_STOPPED_ASLEEP: + return "stopped by debugger AND blocked"; + default: + snprintf (buf, sizeof (buf), "unknown thread_db state %d", state); + return buf; + } +} + + +/* Convert between user-level thread ids and LWP ids. */ + +static int +thread_from_lwp (int pid) +{ + td_thrinfo_t ti; + td_thrhandle_t th; + td_err_e err; + + if (GET_LWP (pid) == 0) + pid = BUILD_LWP (pid, pid); + + gdb_assert (is_lwp (pid)); + + err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (pid), &th); + if (err != TD_OK) + error ("Cannot find user-level thread for LWP %d: %s", + GET_LWP (pid), thread_db_err_str (err)); + + err = td_thr_get_info_p (&th, &ti); + if (err != TD_OK) + error ("Cannot get thread info: %s", thread_db_err_str (err)); + + return BUILD_THREAD (ti.ti_tid, GET_PID (pid)); +} + +static int +lwp_from_thread (int pid) +{ + td_thrinfo_t ti; + td_thrhandle_t th; + td_err_e err; + + if (! is_thread (pid)) + return pid; + + err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th); + if (err != TD_OK) + error ("Cannot find thread %ld: %s", + (long) GET_THREAD (pid), thread_db_err_str (err)); + + err = td_thr_get_info_p (&th, &ti); + if (err != TD_OK) + error ("Cannot get thread info: %s", thread_db_err_str (err)); + + return BUILD_LWP (ti.ti_lid, GET_PID (pid)); +} + + +void +thread_db_init (struct target_ops *target) +{ + target_beneath = target; +} + +static int +thread_db_load (void) +{ + void *handle; + td_err_e err; + + handle = dlopen (LIBTHREAD_DB_SO, RTLD_NOW); + if (handle == NULL) + return 0; + + /* Initialize pointers to the dynamic library functions we will use. + Essential functions first. */ + + td_init_p = dlsym (handle, "td_init"); + if (td_init_p == NULL) + return 0; + + td_ta_new_p = dlsym (handle, "td_ta_new"); + if (td_ta_new_p == NULL) + return 0; + + td_ta_map_id2thr_p = dlsym (handle, "td_ta_map_id2thr"); + if (td_ta_map_id2thr_p == NULL) + return 0; + + td_ta_map_lwp2thr_p = dlsym (handle, "td_ta_map_lwp2thr"); + if (td_ta_map_lwp2thr_p == NULL) + return 0; + + td_ta_thr_iter_p = dlsym (handle, "td_ta_thr_iter"); + if (td_ta_thr_iter_p == NULL) + return 0; + + td_thr_validate_p = dlsym (handle, "td_thr_validate"); + if (td_thr_validate_p == NULL) + return 0; + + td_thr_get_info_p = dlsym (handle, "td_thr_get_info"); + if (td_thr_get_info_p == NULL) + return 0; + + td_thr_getfpregs_p = dlsym (handle, "td_thr_getfpregs"); + if (td_thr_getfpregs_p == NULL) + return 0; + + td_thr_getgregs_p = dlsym (handle, "td_thr_getgregs"); + if (td_thr_getgregs_p == NULL) + return 0; + + td_thr_setfpregs_p = dlsym (handle, "td_thr_setfpregs"); + if (td_thr_setfpregs_p == NULL) + return 0; + + td_thr_setgregs_p = dlsym (handle, "td_thr_setgregs"); + if (td_thr_setgregs_p == NULL) + return 0; + + /* Initialize the library. */ + err = td_init_p (); + if (err != TD_OK) + { + warning ("Cannot initialize libthread_db: %s", thread_db_err_str (err)); + return 0; + } + + /* These are not essential. */ + td_ta_event_addr_p = dlsym (handle, "td_ta_event_addr"); + td_ta_set_event_p = dlsym (handle, "td_ta_set_event"); + td_ta_event_getmsg_p = dlsym (handle, "td_ta_event_getmsg"); + td_thr_event_enable_p = dlsym (handle, "td_thr_event_enable"); + + return 1; +} + +static void +enable_thread_event_reporting (void) +{ + td_thr_events_t events; + td_notify_t notify; + td_err_e err; + + /* We cannot use the thread event reporting facility if these + functions aren't available. */ + if (td_ta_event_addr_p == NULL || td_ta_set_event_p == NULL + || td_ta_event_getmsg_p == NULL || td_thr_event_enable_p == NULL) + return; + + /* Set the process wide mask saying which events we're interested in. */ + td_event_emptyset (&events); + td_event_addset (&events, TD_CREATE); +#if 0 + /* FIXME: kettenis/2000-04-23: The event reporting facility is + broken for TD_DEATH events in glibc 2.1.3, so don't enable it for + now. */ + td_event_addset (&events, TD_DEATH); +#endif + + err = td_ta_set_event_p (thread_agent, &events); + if (err != TD_OK) + { + warning ("Unable to set global thread event mask: %s", + thread_db_err_str (err)); + return; + } + + /* Delete previous thread event breakpoints, if any. */ + remove_thread_event_breakpoints (); + + /* Get address for thread creation breakpoint. */ + err = td_ta_event_addr_p (thread_agent, TD_CREATE, ¬ify); + if (err != TD_OK) + { + warning ("Unable to get location for thread creation breakpoint: %s", + thread_db_err_str (err)); + return; + } + + /* Set up the breakpoint. */ + td_create_bp_addr = (CORE_ADDR) notify.u.bptaddr; + create_thread_event_breakpoint (td_create_bp_addr); + + /* Get address for thread death breakpoint. */ + err = td_ta_event_addr_p (thread_agent, TD_DEATH, ¬ify); + if (err != TD_OK) + { + warning ("Unable to get location for thread creation breakpoint: %s", + thread_db_err_str (err)); + return; + } + + /* Set up the breakpoint. */ + td_death_bp_addr = (CORE_ADDR) notify.u.bptaddr; + create_thread_event_breakpoint (td_death_bp_addr); +} + +static void +disable_thread_event_reporting (void) +{ + td_thr_events_t events; + + /* Set the process wide mask saying we aren't interested in any + events anymore. */ + td_event_emptyset (&events); + td_ta_set_event_p (thread_agent, &events); + + /* Delete thread event breakpoints, if any. */ + remove_thread_event_breakpoints (); + td_create_bp_addr = 0; + td_death_bp_addr = 0; +} + +static void +check_thread_signals (void) +{ +#ifdef GET_THREAD_SIGNALS + if (! thread_signals) + { + sigset_t mask; + int i; + + GET_THREAD_SIGNALS (&mask); + sigemptyset (&thread_stop_set); + sigemptyset (&thread_print_set); + + for (i = 0; i < NSIG; i++) + { + if (sigismember (&mask, i)) + { + if (signal_stop_update (target_signal_from_host (i), 0)) + sigaddset (&thread_stop_set, i); + if (signal_print_update (target_signal_from_host (i), 0)) + sigaddset (&thread_print_set, i); + thread_signals = 1; + } + } + } +#endif +} + +static void +disable_thread_signals (void) +{ +#ifdef GET_THREAD_SIGNALS + if (thread_signals) + { + int i; + + for (i = 0; i < NSIG; i++) + { + if (sigismember (&thread_stop_set, i)) + signal_stop_update (target_signal_from_host (i), 1); + if (sigismember (&thread_print_set, i)) + signal_print_update (target_signal_from_host (i), 1); + } + + thread_signals = 0; + } +#endif +} + +static void +thread_db_push_target (void) +{ + using_thread_db = 1; + + /* Push this target vector. */ + push_target (&thread_db_ops); + + enable_thread_event_reporting (); +} + +static void +thread_db_unpush_target (void) +{ + /* Unpush this target vector. */ + unpush_target (&thread_db_ops); + + using_thread_db = 0; +} + +static void +thread_db_new_objfile (struct objfile *objfile) +{ + td_err_e err; + + if (using_thread_db) + /* Nothing to do. The thread library was already detected and the + target vector was already activated. */ + goto quit; + + if (objfile == NULL) + /* Un-interesting object file. */ + goto quit; + + /* Initialize the structure that identifies the child process. */ + proc_handle.pid = GET_PID (inferior_pid); + + /* Now attempt to open a connection to the thread library running in + the child process. */ + err = td_ta_new_p (&proc_handle, &thread_agent); + switch (err) + { + case TD_NOLIBTHREAD: + /* No thread library found in the child process, probably + because the child process isn't running yet. */ + break; + + case TD_OK: + /* The thread library was detected in the child; we go live now! */ + thread_db_push_target (); + + /* Find all user-space threads. */ + err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback, + &inferior_pid, TD_THR_ANY_STATE, + TD_THR_LOWEST_PRIORITY, TD_SIGNO_MASK, + TD_THR_ANY_USER_FLAGS); + if (err != TD_OK) + error ("Finding new threads failed: %s", thread_db_err_str (err)); + break; + + default: + warning ("Cannot initialize thread debugging library: %s", + thread_db_err_str (err)); + break; + } + + quit: + if (target_new_objfile_chain) + target_new_objfile_chain (objfile); +} + +static void +attach_thread (int pid, const td_thrhandle_t *th_p, + const td_thrinfo_t *ti_p, int verbose) +{ + struct thread_info *tp; + td_err_e err; + + check_thread_signals (); + + if (verbose) + printf_unfiltered ("[New %s]\n", target_pid_to_str (pid)); + + /* Add the thread to GDB's thread list. */ + tp = add_thread (pid); + tp->private = xmalloc (sizeof (struct private_thread_info)); + tp->private->lwpid = ti_p->ti_lid; + + /* Under Linux, we have to attach to each and every thread. */ +#ifdef ATTACH_LWP + if (ti_p->ti_lid != GET_PID (pid)) + ATTACH_LWP (BUILD_LWP (ti_p->ti_lid, GET_PID (pid)), 0); +#endif + + /* Enable thread event reporting for this thread. */ + err = td_thr_event_enable_p (th_p, 1); + if (err != TD_OK) + error ("Cannot enable thread event reporting for %s: %s", + target_pid_to_str (pid), thread_db_err_str (err)); +} + +static void +detach_thread (int pid, int verbose) +{ + if (verbose) + printf_unfiltered ("[%s exited]\n", target_pid_to_str (pid)); +} + +static void +thread_db_detach (char *args, int from_tty) +{ + disable_thread_event_reporting (); + thread_db_unpush_target (); + + target_beneath->to_detach (args, from_tty); +} + +static void +thread_db_resume (int pid, int step, enum target_signal signo) +{ + struct cleanup *old_chain = save_inferior_pid (); + + if (pid == -1) + inferior_pid = lwp_from_thread (inferior_pid); + else if (is_thread (pid)) + pid = lwp_from_thread (pid); + + target_beneath->to_resume (pid, step, signo); + + do_cleanups (old_chain); +} + +/* Check if PID is currently stopped at the location of a thread event + breakpoint location. If it is, read the event message and act upon + the event. */ + +static void +check_event (int pid) +{ + td_event_msg_t msg; + td_thrinfo_t ti; + td_err_e err; + CORE_ADDR stop_pc; + + /* Bail out early if we're not at a thread event breakpoint. */ + stop_pc = read_pc_pid (pid) - DECR_PC_AFTER_BREAK; + if (stop_pc != td_create_bp_addr && stop_pc != td_death_bp_addr) + return; + + err = td_ta_event_getmsg_p (thread_agent, &msg); + if (err != TD_OK) + { + if (err == TD_NOMSG) + return; + + error ("Cannot get thread event message: %s", thread_db_err_str (err)); + } + + err = td_thr_get_info_p (msg.th_p, &ti); + if (err != TD_OK) + error ("Cannot get thread info: %s", thread_db_err_str (err)); + + pid = BUILD_THREAD (ti.ti_tid, GET_PID (pid)); + + switch (msg.event) + { + case TD_CREATE: +#if 0 + /* FIXME: kettenis/2000-08-26: Since we use td_ta_event_getmsg, + there is no guarantee that the breakpoint will match the + event. Should we use td_thr_event_getmsg instead? */ + + if (stop_pc != td_create_bp_addr) + error ("Thread creation event doesn't match breakpoint."); +#endif + + if (in_thread_list (pid)) + error ("Spurious thread creation event."); + + attach_thread (pid, msg.th_p, &ti, 1); + return; + + case TD_DEATH: +#if 0 + /* FIXME: See TD_CREATE. */ + + if (stop_pc != td_death_bp_addr) + error ("Thread death event doesn't match breakpoint."); +#endif + + if (! in_thread_list (pid)) + error ("Spurious thread death event."); + + detach_thread (pid, 1); + return; + + default: + error ("Spurious thread event."); + } +} + +static int +thread_db_wait (int pid, struct target_waitstatus *ourstatus) +{ + extern int trap_pid; + + if (pid != -1 && is_thread (pid)) + pid = lwp_from_thread (pid); + + pid = target_beneath->to_wait (pid, ourstatus); + + if (ourstatus->kind == TARGET_WAITKIND_EXITED) + return -1; + + if (ourstatus->kind == TARGET_WAITKIND_STOPPED + && ourstatus->value.sig == TARGET_SIGNAL_TRAP) + /* Check for a thread event. */ + check_event (pid); + + if (trap_pid) + trap_pid = thread_from_lwp (trap_pid); + + return thread_from_lwp (pid); +} + +static int +thread_db_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, + struct target_ops *target) +{ + struct cleanup *old_chain = save_inferior_pid (); + int xfer; + + if (is_thread (inferior_pid)) + { + /* FIXME: This seems to be necessary to make sure breakpoints + are removed. */ + if (! target_thread_alive (inferior_pid)) + inferior_pid = GET_PID (inferior_pid); + else + inferior_pid = lwp_from_thread (inferior_pid); + } + + xfer = target_beneath->to_xfer_memory (memaddr, myaddr, len, write, target); + + do_cleanups (old_chain); + return xfer; +} + +static void +thread_db_fetch_registers (int regno) +{ + td_thrhandle_t th; + prgregset_t gregset; + gdb_prfpregset_t fpregset; + td_err_e err; + + if (! is_thread (inferior_pid)) + { + /* Pass the request to the target beneath us. */ + target_beneath->to_fetch_registers (regno); + return; + } + + err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th); + if (err != TD_OK) + error ("Cannot find thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); + + err = td_thr_getgregs_p (&th, gregset); + if (err != TD_OK) + error ("Cannot fetch general-purpose registers for thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); + + err = td_thr_getfpregs_p (&th, &fpregset); + if (err != TD_OK) + error ("Cannot get floating-point registers for thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); + + /* Note that we must call supply_gregset after calling the thread_db + routines because the thread_db routines call ps_lgetgregs and + friends which clobber GDB's register cache. */ + supply_gregset ((gdb_gregset_t *) gregset); + supply_fpregset (&fpregset); +} + +static void +thread_db_store_registers (int regno) +{ + td_thrhandle_t th; + prgregset_t gregset; + gdb_prfpregset_t fpregset; + td_err_e err; + + if (! is_thread (inferior_pid)) + { + /* Pass the request to the target beneath us. */ + target_beneath->to_store_registers (regno); + return; + } + + err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th); + if (err != TD_OK) + error ("Cannot find thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); + + if (regno != -1) + { + char raw[MAX_REGISTER_RAW_SIZE]; + + read_register_gen (regno, raw); + thread_db_fetch_registers (-1); + supply_register (regno, raw); + } + + fill_gregset ((gdb_gregset_t *) gregset, -1); + fill_fpregset (&fpregset, -1); + + err = td_thr_setgregs_p (&th, gregset); + if (err != TD_OK) + error ("Cannot store general-purpose registers for thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); + err = td_thr_setfpregs_p (&th, &fpregset); + if (err != TD_OK) + error ("Cannot store floating-point registers for thread %ld: %s", + (long) GET_THREAD (inferior_pid), thread_db_err_str (err)); +} + +static void +thread_db_kill (void) +{ + target_beneath->to_kill (); +} + +static void +thread_db_create_inferior (char *exec_file, char *allargs, char **env) +{ + /* We never want to actually create the inferior! If this is ever + called, it means we were on the target stack when the user said + "run". But we don't want to be on the new inferior's target + stack until the libthread_db connection is ready to be made. So + we unpush ourselves from the stack, and then invoke + find_default_create_inferior, which will invoke the appropriate + process_stratum target to do the create. */ + + thread_db_unpush_target (); + + find_default_create_inferior (exec_file, allargs, env); +} + +static void +thread_db_mourn_inferior (void) +{ + remove_thread_event_breakpoints (); + thread_db_unpush_target (); + + target_beneath->to_mourn_inferior (); +} + +static int +thread_db_thread_alive (int pid) +{ + if (is_thread (pid)) + { + td_thrhandle_t th; + td_err_e err; + + err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th); + if (err != TD_OK) + return 0; + + err = td_thr_validate_p (&th); + if (err != TD_OK) + return 0; + + return 1; + } + + if (target_beneath->to_thread_alive) + return target_beneath->to_thread_alive (pid); + + return 0; +} + +static int +find_new_threads_callback (const td_thrhandle_t *th_p, void *data) +{ + td_thrinfo_t ti; + td_err_e err; + int pid; + + err = td_thr_get_info_p (th_p, &ti); + if (err != TD_OK) + error ("Cannot get thread info: %s", thread_db_err_str (err)); + + pid = BUILD_THREAD (ti.ti_tid, GET_PID (inferior_pid)); + + if (! in_thread_list (pid)) + attach_thread (pid, th_p, &ti, 1); + + return 0; +} + +static void +thread_db_find_new_threads (void) +{ + td_err_e err; + + /* Iterate over all user-space threads to discover new threads. */ + err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback, NULL, + TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY, + TD_SIGNO_MASK, TD_THR_ANY_USER_FLAGS); + if (err != TD_OK) + error ("Cannot find new threads: %s", thread_db_err_str (err)); +} + +static char * +thread_db_pid_to_str (int pid) +{ + if (is_thread (pid)) + { + static char buf[64]; + td_thrhandle_t th; + td_thrinfo_t ti; + td_err_e err; + + err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th); + if (err != TD_OK) + error ("Cannot find thread %ld: %s", + (long) GET_THREAD (pid), thread_db_err_str (err)); + + err = td_thr_get_info_p (&th, &ti); + if (err != TD_OK) + error ("Cannot get thread info for thread %ld: %s", + (long) GET_THREAD (pid), thread_db_err_str (err)); + + if (ti.ti_state == TD_THR_ACTIVE && ti.ti_lid != 0) + { + snprintf (buf, sizeof (buf), "Thread %ld (LWP %d)", + (long) ti.ti_tid, ti.ti_lid); + } + else + { + snprintf (buf, sizeof (buf), "Thread %ld (%s)", + (long) ti.ti_tid, thread_db_state_str (ti.ti_state)); + } + + return buf; + } + + if (target_beneath->to_pid_to_str (pid)) + return target_beneath->to_pid_to_str (pid); + + return normal_pid_to_str (pid); +} + +static void +init_thread_db_ops (void) +{ + thread_db_ops.to_shortname = "multi-thread"; + thread_db_ops.to_longname = "multi-threaded child process."; + thread_db_ops.to_doc = "Threads and pthreads support."; + thread_db_ops.to_detach = thread_db_detach; + thread_db_ops.to_resume = thread_db_resume; + thread_db_ops.to_wait = thread_db_wait; + thread_db_ops.to_fetch_registers = thread_db_fetch_registers; + thread_db_ops.to_store_registers = thread_db_store_registers; + thread_db_ops.to_xfer_memory = thread_db_xfer_memory; + thread_db_ops.to_kill = thread_db_kill; + thread_db_ops.to_create_inferior = thread_db_create_inferior; + thread_db_ops.to_mourn_inferior = thread_db_mourn_inferior; + thread_db_ops.to_thread_alive = thread_db_thread_alive; + thread_db_ops.to_find_new_threads = thread_db_find_new_threads; + thread_db_ops.to_pid_to_str = thread_db_pid_to_str; + thread_db_ops.to_stratum = thread_stratum; + thread_db_ops.to_has_thread_control = tc_schedlock; + thread_db_ops.to_magic = OPS_MAGIC; +} + +void +_initialize_thread_db (void) +{ + /* Only initialize the module if we can load libthread_db. */ + if (thread_db_load ()) + { + init_thread_db_ops (); + add_target (&thread_db_ops); + + /* Add ourselves to objfile event chain. */ + target_new_objfile_chain = target_new_objfile_hook; + target_new_objfile_hook = thread_db_new_objfile; + } +} |