diff options
Diffstat (limited to 'gdb')
| -rw-r--r-- | gdb/ChangeLog | 26 | ||||
| -rw-r--r-- | gdb/gdbthread.h | 7 | ||||
| -rw-r--r-- | gdb/infcmd.c | 2 | ||||
| -rw-r--r-- | gdb/inferior.h | 2 | ||||
| -rw-r--r-- | gdb/infrun.c | 31 | ||||
| -rw-r--r-- | gdb/mi/mi-main.c | 16 | ||||
| -rw-r--r-- | gdb/thread.c | 112 |
7 files changed, 51 insertions, 145 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 1116b12..c679592 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,31 @@ 2008-09-08 Pedro Alves <pedro@codesourcery.com> + * inferior.h (context_switch_to): Delete. + * infrun.c (context_switch): Don't save and load infrun state. + (context_switch_to): Delete. + + * infcmd.c (proceed_thread_callback): Replace context_switch_to + calls by switch_to_thread calls. + + * gdbthread.h (save_infrun_state, load_infrun_state): Delete. + * thread.c (main_thread_state, main_thread_executing): Delete. + (inferior_thread): Delete references to them. + (add_thread_silent): Fix case where we're adding a thread with the + same ptid as an exited thread. Remove references to + context-switching. + (load_infrun_state, save_infrun_state): Delete. + (thread_alive, is_thread_state, any_running, is_executing) + (set_executing): Remove the special handling for targets that + don't register any thread. + (restore_current_thread, thread_apply_all_command) + (do_captured_thread_select): Unconditionally call + switch_to_thread. + + * mi/mi-main.c (mi_cmd_execute): Check for exited threads. + Call switch_to_thread instead of context_switch_to. + +2008-09-08 Pedro Alves <pedro@codesourcery.com> + Remove global continuations in favour of a per-thread continuations. diff --git a/gdb/gdbthread.h b/gdb/gdbthread.h index 1510058..0fb53fb 100644 --- a/gdb/gdbthread.h +++ b/gdb/gdbthread.h @@ -232,13 +232,6 @@ extern struct thread_info *iterate_over_threads (thread_callback_func, void *); extern int thread_count (void); -/* infrun context switch: save the debugger state for the given thread. */ -extern void save_infrun_state (ptid_t ptid); - -/* infrun context switch: load the debugger state previously saved - for the given thread. */ -extern void load_infrun_state (ptid_t ptid); - /* Switch from one thread to another. */ extern void switch_to_thread (ptid_t ptid); diff --git a/gdb/infcmd.c b/gdb/infcmd.c index 8bcfd63..ca11aa5 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -575,7 +575,7 @@ proceed_thread_callback (struct thread_info *thread, void *arg) if (!is_stopped (thread->ptid)) return 0; - context_switch_to (thread->ptid); + switch_to_thread (thread->ptid); clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); return 0; diff --git a/gdb/inferior.h b/gdb/inferior.h index fa3b25e..f0bb405 100644 --- a/gdb/inferior.h +++ b/gdb/inferior.h @@ -132,8 +132,6 @@ extern void clear_proceed_status (void); extern void proceed (CORE_ADDR, enum target_signal, int); -extern ptid_t context_switch_to (ptid_t ptid); - /* When set, stop the 'step' command if we enter a function which has no line number information. The normal behavior is that we step over such function. */ diff --git a/gdb/infrun.c b/gdb/infrun.c index 09afaa8..ede6309 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -1720,17 +1720,11 @@ nullify_last_target_wait_ptid (void) target_last_wait_ptid = minus_one_ptid; } -/* Switch thread contexts, maintaining "infrun state". */ +/* Switch thread contexts. */ static void context_switch (ptid_t ptid) { - /* Caution: it may happen that the new thread (or the old one!) - is not in the thread list. In this case we must not attempt - to "switch context", or we run the risk that our context may - be lost. This may happen as a result of the target module - mishandling thread creation. */ - if (debug_infrun) { fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ", @@ -1739,32 +1733,9 @@ context_switch (ptid_t ptid) target_pid_to_str (ptid)); } - if (in_thread_list (inferior_ptid) && in_thread_list (ptid)) - { /* Perform infrun state context switch: */ - /* Save infrun state for the old thread. */ - save_infrun_state (inferior_ptid); - - /* Load infrun state for the new thread. */ - load_infrun_state (ptid); - } - switch_to_thread (ptid); } -/* Context switch to thread PTID. */ -ptid_t -context_switch_to (ptid_t ptid) -{ - ptid_t current_ptid = inferior_ptid; - - /* Context switch to the new thread. */ - if (!ptid_equal (ptid, inferior_ptid)) - { - context_switch (ptid); - } - return current_ptid; -} - static void adjust_pc_after_break (struct execution_control_state *ecs) { diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c index 332ce42..7780207 100644 --- a/gdb/mi/mi-main.c +++ b/gdb/mi/mi-main.c @@ -1094,19 +1094,19 @@ mi_cmd_execute (struct mi_parse *parse) if (parse->frame != -1 && parse->thread == -1) error (_("Cannot specify --frame without --thread")); - + if (parse->thread != -1) { struct thread_info *tp = find_thread_id (parse->thread); if (!tp) error (_("Invalid thread id: %d"), parse->thread); - - if (non_stop) - context_switch_to (tp->ptid); - else - switch_to_thread (tp->ptid); + + if (is_exited (tp->ptid)) + error (_("Thread id: %d has terminated"), parse->thread); + + switch_to_thread (tp->ptid); } - + if (parse->frame != -1) { struct frame_info *fid; @@ -1118,7 +1118,7 @@ mi_cmd_execute (struct mi_parse *parse) else error (_("Invalid frame id: %d"), frame); } - + if (parse->cmd->argv_func != NULL) { if (target_can_async_p () diff --git a/gdb/thread.c b/gdb/thread.c index 8ebdff3..03d031d 100644 --- a/gdb/thread.c +++ b/gdb/thread.c @@ -71,9 +71,6 @@ enum thread_state THREAD_EXITED, }; -static enum thread_state main_thread_state = THREAD_STOPPED; -static int main_thread_executing = 0; - extern struct thread_info* inferior_thread (void) { @@ -130,8 +127,6 @@ init_thread_list (void) struct thread_info *tp, *tpnext; highest_thread_num = 0; - main_thread_state = THREAD_STOPPED; - main_thread_executing = 0; if (!thread_list) return; @@ -158,12 +153,11 @@ add_thread_silent (ptid_t ptid) one. */ { /* In addition to deleting the thread, if this is the current - thread, then we need to also get rid of the current infrun - context, and take care that delete_thread doesn't really - delete the thread if it is inferior_ptid. Create a new - template thread in the list with an invalid ptid, context - switch to it, delete the original thread, reset the new - thread's ptid, and switch to it. */ + thread, then we need to take care that delete_thread doesn't + really delete the thread if it is inferior_ptid. Create a + new template thread in the list with an invalid ptid, switch + to it, delete the original thread, reset the new thread's + ptid, and switch to it. */ if (ptid_equal (inferior_ptid, ptid)) { @@ -173,14 +167,17 @@ add_thread_silent (ptid_t ptid) tp->num = ++highest_thread_num; tp->next = thread_list; thread_list = tp; - context_switch_to (minus_one_ptid); + + /* Make switch_to_thread not read from the thread. */ + tp->state_ = THREAD_EXITED; + switch_to_thread (minus_one_ptid); /* Now we can delete it. */ delete_thread (ptid); - /* Since the context is already set to this new thread, - reset its ptid, and reswitch inferior_ptid to it. */ + /* Now reset its ptid, and reswitch inferior_ptid to it. */ tp->ptid = ptid; + tp->state_ = THREAD_STOPPED; switch_to_thread (ptid); observer_notify_new_thread (tp); @@ -442,34 +439,6 @@ gdb_list_thread_ids (struct ui_out *uiout, char **error_message) return GDB_RC_OK; } -/* Load infrun state for the thread PID. */ - -void -load_infrun_state (ptid_t ptid) -{ - struct thread_info *tp; - - /* If we can't find the thread, then we're debugging a single threaded - process. No need to do anything in that case. */ - tp = find_thread_id (pid_to_thread_id (ptid)); - if (tp == NULL) - return; -} - -/* Save infrun state for the thread PID. */ - -void -save_infrun_state (ptid_t ptid) -{ - struct thread_info *tp; - - /* If we can't find the thread, then we're debugging a single-threaded - process. Nothing to do in that case. */ - tp = find_thread_id (pid_to_thread_id (ptid)); - if (tp == NULL) - return; -} - /* Return true if TP is an active thread. */ static int thread_alive (struct thread_info *tp) @@ -508,24 +477,6 @@ set_running (ptid_t ptid, int running) { struct thread_info *tp; - if (!thread_list) - { - /* This is one of the targets that does not add main - thread to the thread list. Just use a single - global flag to indicate that a thread is running. - - This problem is unique to ST programs. For MT programs, - the main thread is always present in the thread list. If it's - not, the first call to context_switch will mess up GDB internal - state. */ - if (running - && main_thread_state != THREAD_RUNNING - && !suppress_resume_observer) - observer_notify_target_resumed (ptid); - main_thread_state = running ? THREAD_RUNNING : THREAD_STOPPED; - return; - } - /* We try not to notify the observer if no thread has actually changed the running state -- merely to reduce the number of messages to frontend. Frontend is supposed to handle multiple *running just fine. */ @@ -565,9 +516,6 @@ is_thread_state (ptid_t ptid, enum thread_state state) if (!target_has_execution) return 0; - if (!thread_list) - return main_thread_state == state; - tp = find_thread_pid (ptid); gdb_assert (tp); return tp->state_ == state; @@ -611,9 +559,6 @@ any_running (void) if (!target_has_execution) return 0; - if (!thread_list) - return main_thread_state == THREAD_RUNNING; - for (tp = thread_list; tp; tp = tp->next) if (tp->state_ == THREAD_RUNNING) return 1; @@ -629,9 +574,6 @@ is_executing (ptid_t ptid) if (!target_has_execution) return 0; - if (!thread_list) - return main_thread_executing; - tp = find_thread_pid (ptid); gdb_assert (tp); return tp->executing_; @@ -642,15 +584,6 @@ set_executing (ptid_t ptid, int executing) { struct thread_info *tp; - if (!thread_list) - { - /* This target does not add the main thread to the thread list. - Use a global flag to indicate that the thread is - executing. */ - main_thread_executing = executing; - return; - } - if (PIDGET (ptid) == -1) { for (tp = thread_list; tp; tp = tp->next) @@ -805,13 +738,7 @@ switch_to_thread (ptid_t ptid) static void restore_current_thread (ptid_t ptid) { - if (!ptid_equal (ptid, inferior_ptid)) - { - if (non_stop) - context_switch_to (ptid); - else - switch_to_thread (ptid); - } + switch_to_thread (ptid); } static void @@ -967,10 +894,7 @@ thread_apply_all_command (char *cmd, int from_tty) for (tp = thread_list; tp; tp = tp->next) if (thread_alive (tp)) { - if (non_stop) - context_switch_to (tp->ptid); - else - switch_to_thread (tp->ptid); + switch_to_thread (tp->ptid); printf_filtered (_("\nThread %d (%s):\n"), tp->num, target_tid_to_str (inferior_ptid)); @@ -1040,10 +964,7 @@ thread_apply_command (char *tidlist, int from_tty) warning (_("Thread %d has terminated."), start); else { - if (non_stop) - context_switch_to (tp->ptid); - else - switch_to_thread (tp->ptid); + switch_to_thread (tp->ptid); printf_filtered (_("\nThread %d (%s):\n"), tp->num, target_tid_to_str (inferior_ptid)); @@ -1113,10 +1034,7 @@ do_captured_thread_select (struct ui_out *uiout, void *tidstr) if (!thread_alive (tp)) error (_("Thread ID %d has terminated."), num); - if (non_stop) - context_switch_to (tp->ptid); - else - switch_to_thread (tp->ptid); + switch_to_thread (tp->ptid); ui_out_text (uiout, "[Switching to thread "); ui_out_field_int (uiout, "new-thread-id", pid_to_thread_id (inferior_ptid)); |