diff options
Diffstat (limited to 'gdb')
| -rw-r--r-- | gdb/ChangeLog | 25 | ||||
| -rw-r--r-- | gdb/Makefile.in | 2 | ||||
| -rw-r--r-- | gdb/remote.c | 319 | ||||
| -rw-r--r-- | gdb/symfile.c | 1 | ||||
| -rw-r--r-- | gdb/testsuite/ChangeLog | 5 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/foll-exec.exp | 4 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/foll-fork.exp | 4 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/foll-vfork.exp | 10 |
8 files changed, 326 insertions, 44 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 93a273f..8b16fcd 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,28 @@ +Mon Jul 26 17:13:39 1999 Andrew Cagney <cagney@b1.cygnus.com> + + * remote.c (enum packet_support, enum packet_detect, struct + packet_config): Define. + (set_packet_config_cmd, show_packet_config_cmd, + add_packet_config_cmd, init_packet_config): New functions. + Generic support for optional packets. + (remote_protocol_P): Replace stub_supports_P. + (set_remote_protocol_P_packet_cmd, show_remote_protocol_P_packet_cmd): + New functions. + (_initialize_remote): Add ``set remote-protocol-P-packet'' command. + (remote_open_1, remote_async_open_1, remote_cisco_open): + Initialize ``remote_protocol_P''. + (remote_store_registers): Re-write ``P'' probe logic. + (store_register_using_P): New function. + + From Ian Lance Taylor <ian@airs.com>: + (remote_prepare_to_store): Only read registers when ``P'' packet + is in state unsupported or support-unknown. + +1999-07-24 Fred Fish <fnf@cygnus.com> + + * symfile.c (default_symfile_offsets): Clear section_offsets + before filling it in. + 1999-07-16 Keith Seitz <keiths@cygnus.com> * remote.c (_initialize_remote): "remotebreak" should be a var_boolean. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 74aada1..3703f46 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -224,7 +224,7 @@ CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \ ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) -VERSION = 19990719 +VERSION = 19990726 DIST=gdb LINT=/usr/5bin/lint diff --git a/gdb/remote.c b/gdb/remote.c index 48edb1e..c697bd4 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -375,6 +375,35 @@ void remote_console_output PARAMS ((char *)); static void check_binary_download PARAMS ((CORE_ADDR addr)); +#if __STDC__ +struct packet_config; +#endif + +static void show_packet_config_cmd PARAMS ((struct packet_config * config)); + +static void set_packet_config_cmd PARAMS ((struct packet_config * config, + struct cmd_list_element * c)); + +static void add_packet_config_cmd PARAMS ((struct packet_config * config, + char *name, + char *title, + void (*set_func) (char *args, int from_tty, struct cmd_list_element * c), + void (*show_func) (char *name, int from_tty), + struct cmd_list_element **setlist, + struct cmd_list_element **showlist)); + +static void init_packet_config PARAMS ((struct packet_config * config)); + +static void set_remote_protocol_P_packet_cmd PARAMS ((char *args, + int from_tty, + struct cmd_list_element * c)); + +static void show_remote_protocol_P_packet_cmd PARAMS ((char *args, + int from_tty)); + + + + /* Define the target subroutine names */ void open_remote_target PARAMS ((char *, int, struct target_ops *, int)); @@ -471,9 +500,163 @@ static int remote_address_size; static int remote_register_buf_size = 0; -/* Should we try the 'P' request? If this is set to one when the stub - doesn't support 'P', the only consequence is some unnecessary traffic. */ -static int stub_supports_P = 1; +/* Generic configuration support for packets the stub optionally + supports. Allows the user to specify the use of the packet as well + as allowing GDB to auto-detect support in the remote stub. */ + +enum packet_support + { + PACKET_SUPPORT_UNKNOWN = 0, + PACKET_ENABLE, + PACKET_DISABLE + }; + +enum packet_detect + { + PACKET_AUTO_DETECT = 0, + PACKET_MANUAL_DETECT + }; + +struct packet_config + { + char *state; + char *name; + char *title; + enum packet_detect detect; + enum packet_support support; + }; + +static char packet_support_auto[] = "auto"; +static char packet_enable[] = "enable"; +static char packet_disable[] = "disable"; +static char *packet_support_enums[] = +{ + packet_support_auto, + packet_enable, + packet_disable, + 0, +}; + +static void +set_packet_config_cmd (config, c) + struct packet_config *config; + struct cmd_list_element *c; +{ + if (config->state == packet_enable) + { + config->detect = PACKET_MANUAL_DETECT; + config->support = PACKET_ENABLE; + } + else if (config->state == packet_disable) + { + config->detect = PACKET_MANUAL_DETECT; + config->support = PACKET_DISABLE; + } + else if (config->state == packet_support_auto) + { + config->detect = PACKET_AUTO_DETECT; + config->support = PACKET_SUPPORT_UNKNOWN; + } + else + fatal ("Bad enum value"); +} + +static void +show_packet_config_cmd (config) + struct packet_config *config; +{ + char *support = "internal-error"; + switch (config->support) + { + case PACKET_ENABLE: + support = "enabled"; + break; + case PACKET_DISABLE: + support = "disabled"; + break; + case PACKET_SUPPORT_UNKNOWN: + support = "unknown"; + break; + } + switch (config->detect) + { + case PACKET_AUTO_DETECT: + printf_filtered ("Support for remote protocol `%s' (%s) packet is auto-detected, currently %s.\n", + config->name, config->title, support); + break; + case PACKET_MANUAL_DETECT: + printf_filtered ("Support for remote protocol `%s' (%s) is currently %s.\n", + config->name, config->title, support); + } +} + +static void +add_packet_config_cmd (config, name, title, set_func, show_func, + setlist, showlist) + struct packet_config *config; + char *name; + char *title; + void (*set_func) PARAMS ((char *args, int from_tty, + struct cmd_list_element * c)); + void (*show_func) PARAMS ((char *name, int from_tty)); + struct cmd_list_element **setlist; + struct cmd_list_element **showlist; +{ + struct cmd_list_element *c; + char *set_doc; + char *show_doc; + char *full_name; + config->name = name; + config->title = title; + asprintf (&set_doc, "Set use of remote protocol `%s' (%s) packet", + name, title); + asprintf (&show_doc, "Show current use of remote protocol `%s' (%s) packet", + name, title); + asprintf (&full_name, "%s-packet", name); + c = add_set_enum_cmd (full_name, + class_obscure, packet_support_enums, + (char *) &config->state, + set_doc, setlist); + c->function.sfunc = set_func; + add_cmd (full_name, class_obscure, show_func, show_doc, showlist); +} + +static void +init_packet_config (config) + struct packet_config *config; +{ + switch (config->detect) + { + case PACKET_AUTO_DETECT: + config->support = PACKET_SUPPORT_UNKNOWN; + break; + case PACKET_MANUAL_DETECT: + /* let the user beware */ + break; + } +} + +/* Should we try the 'P' (set register) request? */ + +static struct packet_config remote_protocol_P; + +static void +set_remote_protocol_P_packet_cmd (args, from_tty, c) + char *args; + int from_tty; + struct cmd_list_element *c; +{ + set_packet_config_cmd (&remote_protocol_P, c); +} + +static void +show_remote_protocol_P_packet_cmd (args, from_tty) + char *args; + int from_tty; +{ + show_packet_config_cmd (&remote_protocol_P); +} + /* Tokens for use by the asynchronous signal handlers for SIGINT */ PTR sigint_remote_twice_token; @@ -1718,11 +1901,7 @@ serial device is attached to the remote system (e.g. /dev/ttya)."); } push_target (target); /* Switch to using remote target now */ - /* Start out by trying the 'P' request to set registers. We set - this each time that we open a new target so that if the user - switches from one stub to another, we can (if the target is - closed and reopened) cope. */ - stub_supports_P = 1; + init_packet_config (&remote_protocol_P); general_thread = -2; continue_thread = -2; @@ -1812,11 +1991,7 @@ serial device is attached to the remote system (e.g. /dev/ttya)."); push_target (target); /* Switch to using remote target now */ - /* Start out by trying the 'P' request to set registers. We set - this each time that we open a new target so that if the user - switches from one stub to another, we can (if the target is - closed and reopened) cope. */ - stub_supports_P = 1; + init_packet_config (&remote_protocol_P); general_thread = -2; continue_thread = -2; @@ -2735,9 +2910,45 @@ static void remote_prepare_to_store () { /* Make sure the entire registers array is valid. */ - read_register_bytes (0, (char *) NULL, REGISTER_BYTES); + switch (remote_protocol_P.support) + { + case PACKET_DISABLE: + case PACKET_SUPPORT_UNKNOWN: + read_register_bytes (0, (char *) NULL, REGISTER_BYTES); + break; + case PACKET_ENABLE: + break; + } +} + +/* Helper: Attempt to store REGNO using the P packet. Return fail IFF + packet was not recognized. */ + +static int +store_register_using_P (regno) + int regno; +{ + /* Try storing a single register. */ + char *buf = alloca (PBUFSIZ); + char *regp; + char *p; + int i; + + sprintf (buf, "P%x=", regno); + p = buf + strlen (buf); + regp = ®isters[REGISTER_BYTE (regno)]; + for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i) + { + *p++ = tohex ((regp[i] >> 4) & 0xf); + *p++ = tohex (regp[i] & 0xf); + } + *p = '\0'; + remote_send (buf); + + return buf[0] != '\0'; } + /* Store register REGNO, or all registers if REGNO == -1, from the contents of REGISTERS. FIXME: ignores errors. */ @@ -2751,31 +2962,33 @@ remote_store_registers (regno) set_thread (inferior_pid, 1); - if (regno >= 0 && stub_supports_P) + if (regno >= 0) { - /* Try storing a single register. */ - char *regp; - - sprintf (buf, "P%x=", regno); - p = buf + strlen (buf); - regp = ®isters[REGISTER_BYTE (regno)]; - for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i) - { - *p++ = tohex ((regp[i] >> 4) & 0xf); - *p++ = tohex (regp[i] & 0xf); - } - *p = '\0'; - remote_send (buf); - if (buf[0] != '\0') + switch (remote_protocol_P.support) { - /* The stub understands the 'P' request. We are done. */ - return; + case PACKET_DISABLE: + break; + case PACKET_ENABLE: + if (store_register_using_P (regno)) + return; + else + error ("Protocol error: P packet not recognized by stub"); + case PACKET_SUPPORT_UNKNOWN: + if (store_register_using_P (regno)) + { + /* The stub recognized the 'P' packet. Remember this. */ + remote_protocol_P.support = PACKET_ENABLE; + return; + } + else + { + /* The stub does not support the 'P' packet. Use 'G' + instead, and don't try using 'P' in the future (it + will just waste our time). */ + remote_protocol_P.support = PACKET_DISABLE; + break; + } } - - /* The stub does not support the 'P' request. Use 'G' instead, - and don't try using 'P' in the future (it will just waste our - time). */ - stub_supports_P = 0; } buf[0] = 'G'; @@ -4409,10 +4622,7 @@ device is attached to the remote system (e.g. host:port)."); push_target (&remote_cisco_ops); /* Switch to using cisco target now */ - /* Start out by trying the 'P' request to set registers. We set this each - time that we open a new target so that if the user switches from one - stub to another, we can (if the target is closed and reopened) cope. */ - stub_supports_P = 1; + init_packet_config (&remote_protocol_P); general_thread = -2; continue_thread = -2; @@ -4773,6 +4983,15 @@ Specify the serial device it is connected to (e.g. /dev/ttya).", } static void +set_remote_cmd (args, from_tty) + char *args; + int from_tty; +{ + +} + + +static void build_remote_gdbarch_data () { tty_input = xmalloc (PBUFSIZ); @@ -4781,6 +5000,9 @@ build_remote_gdbarch_data () void _initialize_remote () { + static struct cmd_list_element *remote_set_cmdlist; + static struct cmd_list_element *remote_show_cmdlist; + /* architecture specific data */ build_remote_gdbarch_data (); register_gdbarch_swap (&tty_input, sizeof (&tty_input), NULL); @@ -4809,6 +5031,19 @@ _initialize_remote () init_remote_threadtests (); #endif + add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, "\ +Remote protocol specific variables\n\ +Configure various remote-protocol specific variables such as\n\ +the packets being used", + &remote_set_cmdlist, "remote ", + 0/*allow-unknown*/, &setlist); + add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, "\ +Remote protocol specific variables\n\ +Configure various remote-protocol specific variables such as\n\ +the packets being used", + &remote_show_cmdlist, "remote ", + 0/*allow-unknown*/, &showlist); + add_cmd ("compare-sections", class_obscure, compare_sections_command, "Compare section data on target to the exec file.\n\ Argument is a single section name (default: all loaded sections).", @@ -4862,4 +5097,8 @@ in a memory packet.\n", add_info ("remote-process", remote_info_process, "Query the remote system for process info."); + add_packet_config_cmd (&remote_protocol_P, "P", "set-register", + set_remote_protocol_P_packet_cmd, + show_remote_protocol_P_packet_cmd, + &remote_set_cmdlist, &remote_show_cmdlist); } diff --git a/gdb/symfile.c b/gdb/symfile.c index 5a9bf63..fcf8326 100644 --- a/gdb/symfile.c +++ b/gdb/symfile.c @@ -471,6 +471,7 @@ default_symfile_offsets (objfile, addr) objfile->num_sections = SECT_OFF_MAX; section_offsets = (struct section_offsets *) obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS); + memset (section_offsets, 0, SIZEOF_SECTION_OFFSETS); for (i = 0; i < SECT_OFF_MAX; i++) ANOFFSET (section_offsets, i) = addr; diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index acf71ac..d0c567b 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,8 @@ +1999-07-19 Stan Shebs <shebs@andros.cygnus.com> + + * gdb.base/foll-exec.exp, gdb.base/foll-fork.exp, + gdb.base/foll-vfork.exp: Don't run for crosses. + Tue Jul 13 23:37:18 1999 Andrew Cagney <cagney@b1.cygnus.com> * gdb.base/configure.in: Check for gdbvars.exp instead of diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp index 4342d5f..260a7d8 100644 --- a/gdb/testsuite/gdb.base/foll-exec.exp +++ b/gdb/testsuite/gdb.base/foll-exec.exp @@ -21,6 +21,10 @@ if $tracelevel then { strace $tracelevel } +if { ![isnative] } then { + continue +} + set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.base/foll-fork.exp b/gdb/testsuite/gdb.base/foll-fork.exp index 23afedd..1433d85 100644 --- a/gdb/testsuite/gdb.base/foll-fork.exp +++ b/gdb/testsuite/gdb.base/foll-fork.exp @@ -21,6 +21,10 @@ if $tracelevel then { strace $tracelevel } +if { ![isnative] } then { + continue +} + set prms_id 0 set bug_id 0 diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp index 3a6f99f..b25bf56 100644 --- a/gdb/testsuite/gdb.base/foll-vfork.exp +++ b/gdb/testsuite/gdb.base/foll-vfork.exp @@ -21,14 +21,18 @@ if $tracelevel then { strace $tracelevel } -if [istarget "hppa2.0w-hp-hpux*"] { - warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed." - return 0 +if { ![isnative] } then { + continue } set prms_id 0 set bug_id 0 +if [istarget "hppa2.0w-hp-hpux*"] { + warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed." + return 0 +} + set testfile "foll-vfork" set testfile2 "vforked-prog" set srcfile ${testfile}.c |