diff options
Diffstat (limited to 'gdb')
| -rw-r--r-- | gdb/ChangeLog | 17 | ||||
| -rw-r--r-- | gdb/Makefile.in | 2 | ||||
| -rw-r--r-- | gdb/NEWS | 10 | ||||
| -rw-r--r-- | gdb/configure.tgt | 8 | ||||
| -rw-r--r-- | gdb/doc/ChangeLog | 6 | ||||
| -rw-r--r-- | gdb/doc/gdb.texinfo | 163 | ||||
| -rw-r--r-- | gdb/mips-tdep.c | 19 | ||||
| -rw-r--r-- | gdb/mips-tdep.h | 3 | ||||
| -rw-r--r-- | gdb/remote-m32r-sdi.c | 1722 | ||||
| -rw-r--r-- | gdb/remote-mips.c | 3771 | ||||
| -rw-r--r-- | gdb/symfile.c | 8 |
11 files changed, 38 insertions, 5691 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 9e016ae..c7ebb2d 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,20 @@ +2016-03-31 Pedro Alves <palves@redhat.com> + + * NEWS: Mention that support for "target m32rsdi", "target mips", + "target pmon", "target ddb", "target rockhopper", and "target lsi" + was removed. + * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and + remote-mips.o. + (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c. + * configure.tgt: Remove all references to remote-m32r-sdi.o and + remote-mips.o. + * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete + function. + * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete + declaration. + * remote-m32r-sdi.c, remote-mips.c: Delete files. + * symfile.c (generic_load, generic_load): Remove comments. + 2016-03-30 Yao Qi <yao.qi@linaro.org> * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 602ef43..ccd5c23 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -716,7 +716,6 @@ ALL_TARGET_OBS = \ sol2-tdep.o \ solib-frv.o solib-svr4.o \ solib-darwin.o solib-dsbt.o \ - remote-m32r-sdi.o remote-mips.o \ xcoffread.o \ symfile-mem.o \ windows-tdep.o \ @@ -1733,7 +1732,6 @@ ALLDEPFILES = \ ppcobsd-nat.c ppcobsd-tdep.c \ procfs.c \ ravenscar-thread.c \ - remote-m32r-sdi.c remote-mips.c \ remote-sim.c \ dcache.c \ rl78-tdep.c \ @@ -41,6 +41,16 @@ maint info line-table REGEXP was added in GDBserver, including JIT compiling fast tracepoint's conditional expression bytecode into native code. +* Support for various remote target protocols and ROM monitors has + been removed: + + target m32rsdi Remote M32R debugging over SDI + target mips MIPS remote debugging protocol + target pmon PMON ROM monitor + target ddb NEC's DDB variant of PMON for Vr4300 + target rockhopper NEC RockHopper variant of PMON + target lsi LSI variant of PMO + *** Changes in GDB 7.11 * GDB now supports debugging kernel-based threads on FreeBSD. diff --git a/gdb/configure.tgt b/gdb/configure.tgt index c2b9c40..cd8e05d 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -285,7 +285,7 @@ m32c-*-*) m32r*-*-linux*) # Target: Renesas M32R running GNU/Linux - gdb_target_obs="m32r-tdep.o m32r-linux-tdep.o remote-m32r-sdi.o \ + gdb_target_obs="m32r-tdep.o m32r-linux-tdep.o \ glibc-tdep.o solib-svr4.o symfile-mem.o \ linux-tdep.o" gdb_sim=../sim/m32r/libsim.a @@ -293,7 +293,7 @@ m32r*-*-linux*) ;; m32r*-*-*) # Target: Renesas m32r processor - gdb_target_obs="m32r-tdep.o remote-m32r-sdi.o" + gdb_target_obs="m32r-tdep.o" gdb_sim=../sim/m32r/libsim.a ;; @@ -364,12 +364,12 @@ mips64*-*-openbsd*) ;; mips*-sde*-elf*) # Target: MIPS SDE - gdb_target_obs="mips-tdep.o mips-sde-tdep.o remote-mips.o" + gdb_target_obs="mips-tdep.o mips-sde-tdep.o" gdb_sim=../sim/mips/libsim.a ;; mips*-*-elf) # Target: MIPS ELF - gdb_target_obs="mips-tdep.o remote-mips.o" + gdb_target_obs="mips-tdep.o" gdb_sim=../sim/mips/libsim.a ;; mips*-*-*) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index c34c4f3..d113c62 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,9 @@ +2016-03-31 Pedro Alves <palves@redhat.com> + + * gdb.texinfo (M32R/SDI): Delete node. + (MIPS Embedded): Remove references to the MIPS remote debugging + protocol, PMON and variants, and the associated commands. + 2016-03-15 Doug Evans <dje@google.com> * gdb.texinfo (Target Descriptions): New menu item "Enum Target Types". diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 2f4da84..7abd55e 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -21852,7 +21852,6 @@ acceptable commands. @menu * ARM:: ARM -* M32R/SDI:: Renesas M32R/SDI * M68K:: Motorola M68K * MicroBlaze:: Xilinx MicroBlaze * MIPS Embedded:: MIPS Embedded @@ -21959,43 +21958,6 @@ The default value is @code{all}. @end table @end table -@node M32R/SDI -@subsection Renesas M32R/SDI - -The following commands are available for M32R/SDI: - -@table @code -@item sdireset -@kindex sdireset -@cindex reset SDI connection, M32R -This command resets the SDI connection. - -@item sdistatus -@kindex sdistatus -This command shows the SDI connection status. - -@item debug_chaos -@kindex debug_chaos -@cindex M32R/Chaos debugging -Instructs the remote that M32R/Chaos debugging is to be used. - -@item use_debug_dma -@kindex use_debug_dma -Instructs the remote to use the DEBUG_DMA method of accessing memory. - -@item use_mon_code -@kindex use_mon_code -Instructs the remote to use the MON_CODE method of accessing memory. - -@item use_ib_break -@kindex use_ib_break -Instructs the remote to set breakpoints by IB break. - -@item use_dbt_break -@kindex use_dbt_break -Instructs the remote to set breakpoints by DBT. -@end table - @node M68K @subsection M68k @@ -22042,59 +22004,8 @@ Show MicroBlaze-specific debugging level. @node MIPS Embedded @subsection @acronym{MIPS} Embedded -@cindex @acronym{MIPS} boards -@value{GDBN} can use the @acronym{MIPS} remote debugging protocol to talk to a -@acronym{MIPS} board attached to a serial line. This is available when -you configure @value{GDBN} with @samp{--target=mips-elf}. - -@need 1000 -Use these @value{GDBN} commands to specify the connection to your target board: - -@table @code -@item target mips @var{port} -@kindex target mips @var{port} -To run a program on the board, start up @code{@value{GDBP}} with the -name of your program as the argument. To connect to the board, use the -command @samp{target mips @var{port}}, where @var{port} is the name of -the serial port connected to the board. If the program has not already -been downloaded to the board, you may use the @code{load} command to -download it. You can then use all the usual @value{GDBN} commands. - -For example, this sequence connects to the target board through a serial -port, and loads and runs a program called @var{prog} through the -debugger: - -@smallexample -host$ @value{GDBP} @var{prog} -@value{GDBN} is free software and @dots{} -(@value{GDBP}) target mips /dev/ttyb -(@value{GDBP}) load @var{prog} -(@value{GDBP}) run -@end smallexample - -@item target mips @var{hostname}:@var{portnumber} -On some @value{GDBN} host configurations, you can specify a TCP -connection (for instance, to a serial line managed by a terminal -concentrator) instead of a serial port, using the syntax -@samp{@var{hostname}:@var{portnumber}}. - -@item target pmon @var{port} -@kindex target pmon @var{port} -PMON ROM monitor. - -@item target ddb @var{port} -@kindex target ddb @var{port} -NEC's DDB variant of PMON for Vr4300. - -@item target lsi @var{port} -@kindex target lsi @var{port} -LSI variant of PMON. - -@end table - - @noindent -@value{GDBN} also supports these special commands for @acronym{MIPS} targets: +@value{GDBN} supports these special commands for @acronym{MIPS} targets: @table @code @item set mipsfpu double @@ -22124,78 +22035,6 @@ and @samp{set mipsfpu off} will select no floating point. As usual, you can inquire about the @code{mipsfpu} variable with @samp{show mipsfpu}. - -@item set timeout @var{seconds} -@itemx set retransmit-timeout @var{seconds} -@itemx show timeout -@itemx show retransmit-timeout -@cindex @code{timeout}, @acronym{MIPS} protocol -@cindex @code{retransmit-timeout}, @acronym{MIPS} protocol -@kindex set timeout -@kindex show timeout -@kindex set retransmit-timeout -@kindex show retransmit-timeout -You can control the timeout used while waiting for a packet, in the @acronym{MIPS} -remote protocol, with the @code{set timeout @var{seconds}} command. The -default is 5 seconds. Similarly, you can control the timeout used while -waiting for an acknowledgment of a packet with the @code{set -retransmit-timeout @var{seconds}} command. The default is 3 seconds. -You can inspect both values with @code{show timeout} and @code{show -retransmit-timeout}. (These commands are @emph{only} available when -@value{GDBN} is configured for @samp{--target=mips-elf}.) - -The timeout set by @code{set timeout} does not apply when @value{GDBN} -is waiting for your program to stop. In that case, @value{GDBN} waits -forever because it has no way of knowing how long the program is going -to run before stopping. - -@item set syn-garbage-limit @var{num} -@kindex set syn-garbage-limit@r{, @acronym{MIPS} remote} -@cindex synchronize with remote @acronym{MIPS} target -Limit the maximum number of characters @value{GDBN} should ignore when -it tries to synchronize with the remote target. The default is 10 -characters. Setting the limit to -1 means there's no limit. - -@item show syn-garbage-limit -@kindex show syn-garbage-limit@r{, @acronym{MIPS} remote} -Show the current limit on the number of characters to ignore when -trying to synchronize with the remote system. - -@item set monitor-prompt @var{prompt} -@kindex set monitor-prompt@r{, @acronym{MIPS} remote} -@cindex remote monitor prompt -Tell @value{GDBN} to expect the specified @var{prompt} string from the -remote monitor. The default depends on the target: -@table @asis -@item pmon target -@samp{PMON} -@item ddb target -@samp{NEC010} -@item lsi target -@samp{PMON>} -@end table - -@item show monitor-prompt -@kindex show monitor-prompt@r{, @acronym{MIPS} remote} -Show the current strings @value{GDBN} expects as the prompt from the -remote monitor. - -@item set monitor-warnings -@kindex set monitor-warnings@r{, @acronym{MIPS} remote} -Enable or disable monitor warnings about hardware breakpoints. This -has effect only for the @code{lsi} target. When on, @value{GDBN} will -display warning messages whose codes are returned by the @code{lsi} -PMON monitor for breakpoint commands. - -@item show monitor-warnings -@kindex show monitor-warnings@r{, @acronym{MIPS} remote} -Show the current setting of printing monitor warnings. - -@item pmon @var{command} -@kindex pmon@r{, @acronym{MIPS} remote} -@cindex send PMON command -This command allows sending an arbitrary @var{command} string to the -monitor. The monitor must be in debug mode for this to work. @end table @node PowerPC Embedded diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index 178a163..c2bf0c0 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -6981,25 +6981,6 @@ set_mipsfpu_auto_command (char *args, int from_tty) mips_fpu_type_auto = 1; } -/* Attempt to identify the particular processor model by reading the - processor id. NOTE: cagney/2003-11-15: Firstly it isn't clear that - the relevant processor still exists (it dates back to '94) and - secondly this is not the way to do this. The processor type should - be set by forcing an architecture change. */ - -void -deprecated_mips_set_processor_regs_hack (void) -{ - struct regcache *regcache = get_current_regcache (); - struct gdbarch *gdbarch = get_regcache_arch (regcache); - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - ULONGEST prid; - - regcache_cooked_read_unsigned (regcache, MIPS_PRID_REGNUM, &prid); - if ((prid & ~0xf) == 0x700) - tdep->mips_processor_reg_names = mips_r3041_reg_names; -} - /* Just like reinit_frame_cache, but with the right arguments to be callable as an sfunc. */ diff --git a/gdb/mips-tdep.h b/gdb/mips-tdep.h index 2e4d194..4e547b4 100644 --- a/gdb/mips-tdep.h +++ b/gdb/mips-tdep.h @@ -144,9 +144,6 @@ enum MIPS_LAST_EMBED_REGNUM = 89 /* Last one. */ }; -/* Defined in mips-tdep.c and used in remote-mips.c. */ -extern void deprecated_mips_set_processor_regs_hack (void); - /* Instruction sizes and other useful constants. */ enum { diff --git a/gdb/remote-m32r-sdi.c b/gdb/remote-m32r-sdi.c deleted file mode 100644 index 2d3a1ad..0000000 --- a/gdb/remote-m32r-sdi.c +++ /dev/null @@ -1,1722 +0,0 @@ -/* Remote debugging interface for M32R/SDI. - - Copyright (C) 2003-2016 Free Software Foundation, Inc. - - Contributed by Renesas Technology Co. - Written by Kei Sakamoto <sakamoto.kei@renesas.com>. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -#include "defs.h" -#include "gdbcmd.h" -#include "gdbcore.h" -#include "inferior.h" -#include "infrun.h" -#include "target.h" -#include "regcache.h" -#include "gdbthread.h" -#include <ctype.h> -#include <signal.h> -#ifdef __MINGW32__ -#include <winsock2.h> -#else -#include <netinet/in.h> -#endif -#include <sys/types.h> -#include "gdb_sys_time.h" -#include <time.h> -#include "gdb_bfd.h" -#include "cli/cli-utils.h" -#include "symfile.h" -#include "serial.h" - -/* Descriptor for I/O to remote machine. */ - -static struct serial *sdi_desc = NULL; - -#define SDI_TIMEOUT 30 - - -#define SDIPORT 3232 - -static char chip_name[64]; - -static int step_mode; -static unsigned long last_pc_addr = 0xffffffff; -static unsigned char last_pc_addr_data[2]; - -static int mmu_on = 0; - -static int use_ib_breakpoints = 1; - -#define MAX_BREAKPOINTS 1024 -static int max_ib_breakpoints; -static unsigned long bp_address[MAX_BREAKPOINTS]; -static unsigned char bp_data[MAX_BREAKPOINTS][4]; - -/* dbt -> nop */ -static const unsigned char dbt_bp_entry[] = { - 0x10, 0xe0, 0x70, 0x00 -}; - -#define MAX_ACCESS_BREAKS 4 -static int max_access_breaks; -static unsigned long ab_address[MAX_ACCESS_BREAKS]; -static unsigned int ab_type[MAX_ACCESS_BREAKS]; -static unsigned int ab_size[MAX_ACCESS_BREAKS]; -static CORE_ADDR hit_watchpoint_addr = 0; - -static int interrupted = 0; - -/* Forward data declarations */ -extern struct target_ops m32r_ops; - -/* This is the ptid we use while we're connected to the remote. Its - value is arbitrary, as the target doesn't have a notion of - processes or threads, but we need something non-null to place in - inferior_ptid. */ -static ptid_t remote_m32r_ptid; - -/* Commands */ -#define SDI_OPEN 1 -#define SDI_CLOSE 2 -#define SDI_RELEASE 3 -#define SDI_READ_CPU_REG 4 -#define SDI_WRITE_CPU_REG 5 -#define SDI_READ_MEMORY 6 -#define SDI_WRITE_MEMORY 7 -#define SDI_EXEC_CPU 8 -#define SDI_STOP_CPU 9 -#define SDI_WAIT_FOR_READY 10 -#define SDI_GET_ATTR 11 -#define SDI_SET_ATTR 12 -#define SDI_STATUS 13 - -/* Attributes */ -#define SDI_ATTR_NAME 1 -#define SDI_ATTR_BRK 2 -#define SDI_ATTR_ABRK 3 -#define SDI_ATTR_CACHE 4 -#define SDI_CACHE_TYPE_M32102 0 -#define SDI_CACHE_TYPE_CHAOS 1 -#define SDI_ATTR_MEM_ACCESS 5 -#define SDI_MEM_ACCESS_DEBUG_DMA 0 -#define SDI_MEM_ACCESS_MON_CODE 1 - -/* Registers */ -#define SDI_REG_R0 0 -#define SDI_REG_R1 1 -#define SDI_REG_R2 2 -#define SDI_REG_R3 3 -#define SDI_REG_R4 4 -#define SDI_REG_R5 5 -#define SDI_REG_R6 6 -#define SDI_REG_R7 7 -#define SDI_REG_R8 8 -#define SDI_REG_R9 9 -#define SDI_REG_R10 10 -#define SDI_REG_R11 11 -#define SDI_REG_R12 12 -#define SDI_REG_FP 13 -#define SDI_REG_LR 14 -#define SDI_REG_SP 15 -#define SDI_REG_PSW 16 -#define SDI_REG_CBR 17 -#define SDI_REG_SPI 18 -#define SDI_REG_SPU 19 -#define SDI_REG_CR4 20 -#define SDI_REG_EVB 21 -#define SDI_REG_BPC 22 -#define SDI_REG_CR7 23 -#define SDI_REG_BBPSW 24 -#define SDI_REG_CR9 25 -#define SDI_REG_CR10 26 -#define SDI_REG_CR11 27 -#define SDI_REG_CR12 28 -#define SDI_REG_WR 29 -#define SDI_REG_BBPC 30 -#define SDI_REG_PBP 31 -#define SDI_REG_ACCH 32 -#define SDI_REG_ACCL 33 -#define SDI_REG_ACC1H 34 -#define SDI_REG_ACC1L 35 - - -/* Low level communication functions. */ - -/* Check an ack packet from the target. */ -static int -get_ack (void) -{ - int c; - - if (!sdi_desc) - return -1; - - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - - if (c < 0) - return -1; - - if (c != '+') /* error */ - return -1; - - return 0; -} - -/* Send data to the target and check an ack packet. */ -static int -send_data (const void *buf, int len) -{ - if (!sdi_desc) - return -1; - - if (serial_write (sdi_desc, buf, len) != 0) - return -1; - - if (get_ack () == -1) - return -1; - - return len; -} - -/* Receive data from the target. */ -static int -recv_data (void *buf, int len) -{ - int total = 0; - int c; - - if (!sdi_desc) - return -1; - - while (total < len) - { - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - - if (c < 0) - return -1; - - ((unsigned char *) buf)[total++] = c; - } - - return len; -} - -/* Store unsigned long parameter on packet. */ -static void -store_long_parameter (void *buf, long val) -{ - val = htonl (val); - memcpy (buf, &val, 4); -} - -static int -send_cmd (unsigned char cmd) -{ - unsigned char buf[1]; - - buf[0] = cmd; - return send_data (buf, 1); -} - -static int -send_one_arg_cmd (unsigned char cmd, unsigned char arg1) -{ - unsigned char buf[2]; - - buf[0] = cmd; - buf[1] = arg1; - return send_data (buf, 2); -} - -static int -send_two_arg_cmd (unsigned char cmd, unsigned char arg1, unsigned long arg2) -{ - unsigned char buf[6]; - - buf[0] = cmd; - buf[1] = arg1; - store_long_parameter (buf + 2, arg2); - return send_data (buf, 6); -} - -static int -send_three_arg_cmd (unsigned char cmd, unsigned long arg1, unsigned long arg2, - unsigned long arg3) -{ - unsigned char buf[13]; - - buf[0] = cmd; - store_long_parameter (buf + 1, arg1); - store_long_parameter (buf + 5, arg2); - store_long_parameter (buf + 9, arg3); - return send_data (buf, 13); -} - -static unsigned char -recv_char_data (void) -{ - unsigned char val = 0; /* -Wall */ - - recv_data (&val, 1); - return val; -} - -static unsigned long -recv_long_data (void) -{ - unsigned long val = 0; /* -Wall */ - - recv_data (&val, 4); - return ntohl (val); -} - - -/* Check if MMU is on. */ -static void -check_mmu_status (void) -{ - unsigned long val; - - /* Read PC address. */ - if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC) == -1) - return; - val = recv_long_data (); - if ((val & 0xc0000000) == 0x80000000) - { - mmu_on = 1; - return; - } - - /* Read EVB address. */ - if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_EVB) == -1) - return; - val = recv_long_data (); - if ((val & 0xc0000000) == 0x80000000) - { - mmu_on = 1; - return; - } - - mmu_on = 0; -} - - -/* This is called not only when we first attach, but also when the - user types "run" after having attached. */ -static void -m32r_create_inferior (struct target_ops *ops, char *execfile, - char *args, char **env, int from_tty) -{ - CORE_ADDR entry_pt; - - if (args && *args) - error (_("Cannot pass arguments to remote STDEBUG process")); - - if (execfile == 0 || exec_bfd == 0) - error (_("No executable file specified")); - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_create_inferior(%s,%s)\n", execfile, - args); - - entry_pt = bfd_get_start_address (exec_bfd); - - /* The "process" (board) is already stopped awaiting our commands, and - the program is already downloaded. We just set its PC and go. */ - - clear_proceed_status (0); - - /* Tell wait_for_inferior that we've started a new process. */ - init_wait_for_inferior (); - - /* Set up the "saved terminal modes" of the inferior - based on what modes we are starting it with. */ - target_terminal_init (); - - /* Install inferior's terminal modes. */ - target_terminal_inferior (); - - regcache_write_pc (get_current_regcache (), entry_pt); -} - -/* Open a connection to a remote debugger. - NAME is the filename used for communication. */ - -static void -m32r_open (const char *args, int from_tty) -{ - struct hostent *host_ent; - struct sockaddr_in server_addr; - char hostname[256]; - const char *port_str; - int port; - int i, n; - int yes = 1; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_open(%d)\n", from_tty); - - target_preopen (from_tty); - - push_target (&m32r_ops); - - if (args == NULL) - xsnprintf (hostname, sizeof (hostname), "localhost:%d", SDIPORT); - else - { - port_str = strchr (args, ':'); - if (port_str == NULL) - xsnprintf (hostname, sizeof (hostname), "%s:%d", args, SDIPORT); - else - xsnprintf (hostname, sizeof (hostname), "%s", args); - } - - sdi_desc = serial_open (hostname); - if (!sdi_desc) - error (_("Connection refused.")); - - if (get_ack () == -1) - error (_("Cannot connect to SDI target.")); - - if (send_cmd (SDI_OPEN) == -1) - error (_("Cannot connect to SDI target.")); - - /* Get maximum number of ib breakpoints. */ - send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_BRK); - max_ib_breakpoints = recv_char_data (); - if (remote_debug) - printf_filtered ("Max IB Breakpoints = %d\n", max_ib_breakpoints); - - /* Initialize breakpoints. */ - for (i = 0; i < MAX_BREAKPOINTS; i++) - bp_address[i] = 0xffffffff; - - /* Get maximum number of access breaks. */ - send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_ABRK); - max_access_breaks = recv_char_data (); - if (remote_debug) - printf_filtered ("Max Access Breaks = %d\n", max_access_breaks); - - /* Initialize access breask. */ - for (i = 0; i < MAX_ACCESS_BREAKS; i++) - ab_address[i] = 0x00000000; - - check_mmu_status (); - - /* Get the name of chip on target board. */ - send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_NAME); - recv_data (chip_name, 64); - - if (from_tty) - printf_filtered ("Remote %s connected to %s\n", target_shortname, - chip_name); -} - -/* Close out all files and local state before this target loses control. */ - -static void -m32r_close (struct target_ops *self) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_close()\n"); - - if (sdi_desc) - { - send_cmd (SDI_CLOSE); - serial_close (sdi_desc); - sdi_desc = NULL; - } - - inferior_ptid = null_ptid; - delete_thread_silent (remote_m32r_ptid); - return; -} - -/* Tell the remote machine to resume. */ - -static void -m32r_resume (struct target_ops *ops, - ptid_t ptid, int step, enum gdb_signal sig) -{ - unsigned long pc_addr, bp_addr, ab_addr; - int ib_breakpoints; - unsigned char buf[13]; - int i; - - if (remote_debug) - { - if (step) - fprintf_unfiltered (gdb_stdlog, "\nm32r_resume(step)\n"); - else - fprintf_unfiltered (gdb_stdlog, "\nm32r_resume(cont)\n"); - } - - check_mmu_status (); - - pc_addr = regcache_read_pc (get_current_regcache ()); - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "pc <= 0x%lx\n", pc_addr); - - /* At pc address there is a parallel instruction with +2 offset, - so we have to make it a serial instruction or avoid it. */ - if (pc_addr == last_pc_addr) - { - /* Avoid a parallel nop. */ - if (last_pc_addr_data[0] == 0xf0 && last_pc_addr_data[1] == 0x00) - { - pc_addr += 2; - /* Now we can forget this instruction. */ - last_pc_addr = 0xffffffff; - } - /* Clear a parallel bit. */ - else - { - buf[0] = SDI_WRITE_MEMORY; - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - store_long_parameter (buf + 1, pc_addr); - else - store_long_parameter (buf + 1, pc_addr - 1); - store_long_parameter (buf + 5, 1); - buf[9] = last_pc_addr_data[0] & 0x7f; - send_data (buf, 10); - } - } - - /* Set PC. */ - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr); - - /* step mode. */ - step_mode = step; - if (step) - { - /* Set PBP. */ - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, pc_addr | 1); - } - else - { - /* Unset PBP. */ - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, 0x00000000); - } - - if (use_ib_breakpoints) - ib_breakpoints = max_ib_breakpoints; - else - ib_breakpoints = 0; - - /* Set ib breakpoints. */ - for (i = 0; i < ib_breakpoints; i++) - { - bp_addr = bp_address[i]; - - if (bp_addr == 0xffffffff) - continue; - - /* Set PBP. */ - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4, - 0x00000006); - else - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4, - 0x06000000); - - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8080 + 4 * i, 4, bp_addr); - } - - /* Set dbt breakpoints. */ - for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++) - { - bp_addr = bp_address[i]; - - if (bp_addr == 0xffffffff) - continue; - - if (!mmu_on) - bp_addr &= 0x7fffffff; - - /* Write DBT instruction. */ - buf[0] = SDI_WRITE_MEMORY; - store_long_parameter (buf + 1, (bp_addr & 0xfffffffc)); - store_long_parameter (buf + 5, 4); - if ((bp_addr & 2) == 0 && bp_addr != (pc_addr & 0xfffffffc)) - { - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - { - buf[9] = dbt_bp_entry[0]; - buf[10] = dbt_bp_entry[1]; - buf[11] = dbt_bp_entry[2]; - buf[12] = dbt_bp_entry[3]; - } - else - { - buf[9] = dbt_bp_entry[3]; - buf[10] = dbt_bp_entry[2]; - buf[11] = dbt_bp_entry[1]; - buf[12] = dbt_bp_entry[0]; - } - } - else - { - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - { - if ((bp_addr & 2) == 0) - { - buf[9] = dbt_bp_entry[0]; - buf[10] = dbt_bp_entry[1]; - buf[11] = bp_data[i][2] & 0x7f; - buf[12] = bp_data[i][3]; - } - else - { - buf[9] = bp_data[i][0]; - buf[10] = bp_data[i][1]; - buf[11] = dbt_bp_entry[0]; - buf[12] = dbt_bp_entry[1]; - } - } - else - { - if ((bp_addr & 2) == 0) - { - buf[9] = bp_data[i][0]; - buf[10] = bp_data[i][1] & 0x7f; - buf[11] = dbt_bp_entry[1]; - buf[12] = dbt_bp_entry[0]; - } - else - { - buf[9] = dbt_bp_entry[1]; - buf[10] = dbt_bp_entry[0]; - buf[11] = bp_data[i][2]; - buf[12] = bp_data[i][3]; - } - } - } - send_data (buf, 13); - } - - /* Set access breaks. */ - for (i = 0; i < max_access_breaks; i++) - { - ab_addr = ab_address[i]; - - if (ab_addr == 0x00000000) - continue; - - /* DBC register. */ - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - { - switch (ab_type[i]) - { - case 0: /* write watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x00000086); - break; - case 1: /* read watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x00000046); - break; - case 2: /* access watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x00000006); - break; - } - } - else - { - switch (ab_type[i]) - { - case 0: /* write watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x86000000); - break; - case 1: /* read watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x46000000); - break; - case 2: /* access watch */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x06000000); - break; - } - } - - /* DBAH register. */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8180 + 4 * i, 4, ab_addr); - - /* DBAL register. */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8200 + 4 * i, 4, - 0xffffffff); - - /* DBD register. */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8280 + 4 * i, 4, - 0x00000000); - - /* DBDM register. */ - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8300 + 4 * i, 4, - 0x00000000); - } - - /* Resume program. */ - send_cmd (SDI_EXEC_CPU); - - /* Without this, some commands which require an active target (such as kill) - won't work. This variable serves (at least) double duty as both the pid - of the target process (if it has such), and as a flag indicating that a - target is active. These functions should be split out into seperate - variables, especially since GDB will someday have a notion of debugging - several processes. */ - inferior_ptid = remote_m32r_ptid; - add_thread_silent (remote_m32r_ptid); - - return; -} - -/* Wait until the remote machine stops, then return, - storing status in STATUS just as `wait' would. */ - -static void -gdb_cntrl_c (int signo) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "interrupt\n"); - interrupted = 1; -} - -static ptid_t -m32r_wait (struct target_ops *ops, - ptid_t ptid, struct target_waitstatus *status, int options) -{ - static sighandler_t prev_sigint; - unsigned long bp_addr, pc_addr; - int ib_breakpoints; - long i; - unsigned char buf[13]; - int ret, c; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_wait()\n"); - - status->kind = TARGET_WAITKIND_EXITED; - status->value.sig = GDB_SIGNAL_0; - - interrupted = 0; - prev_sigint = signal (SIGINT, gdb_cntrl_c); - - /* Wait for ready. */ - buf[0] = SDI_WAIT_FOR_READY; - if (serial_write (sdi_desc, buf, 1) != 0) - error (_("Remote connection closed")); - - while (1) - { - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - if (c < 0) - error (_("Remote connection closed")); - - if (c == '-') /* error */ - { - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = GDB_SIGNAL_HUP; - return inferior_ptid; - } - else if (c == '+') /* stopped */ - break; - - if (interrupted) - ret = serial_write (sdi_desc, "!", 1); /* packet to interrupt */ - else - ret = serial_write (sdi_desc, ".", 1); /* packet to wait */ - if (ret != 0) - error (_("Remote connection closed")); - } - - status->kind = TARGET_WAITKIND_STOPPED; - if (interrupted) - status->value.sig = GDB_SIGNAL_INT; - else - status->value.sig = GDB_SIGNAL_TRAP; - - interrupted = 0; - signal (SIGINT, prev_sigint); - - check_mmu_status (); - - /* Recover parallel bit. */ - if (last_pc_addr != 0xffffffff) - { - buf[0] = SDI_WRITE_MEMORY; - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - store_long_parameter (buf + 1, last_pc_addr); - else - store_long_parameter (buf + 1, last_pc_addr - 1); - store_long_parameter (buf + 5, 1); - buf[9] = last_pc_addr_data[0]; - send_data (buf, 10); - last_pc_addr = 0xffffffff; - } - - if (use_ib_breakpoints) - ib_breakpoints = max_ib_breakpoints; - else - ib_breakpoints = 0; - - /* Set back pc by 2 if m32r is stopped with dbt. */ - last_pc_addr = 0xffffffff; - send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC); - pc_addr = recv_long_data () - 2; - for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++) - { - if (pc_addr == bp_address[i]) - { - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr); - - /* If there is a parallel instruction with +2 offset at pc - address, we have to take care of it later. */ - if ((pc_addr & 0x2) != 0) - { - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - { - if ((bp_data[i][2] & 0x80) != 0) - { - last_pc_addr = pc_addr; - last_pc_addr_data[0] = bp_data[i][2]; - last_pc_addr_data[1] = bp_data[i][3]; - } - } - else - { - if ((bp_data[i][1] & 0x80) != 0) - { - last_pc_addr = pc_addr; - last_pc_addr_data[0] = bp_data[i][1]; - last_pc_addr_data[1] = bp_data[i][0]; - } - } - } - break; - } - } - - /* Remove ib breakpoints. */ - for (i = 0; i < ib_breakpoints; i++) - { - if (bp_address[i] != 0xffffffff) - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4, - 0x00000000); - } - /* Remove dbt breakpoints. */ - for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++) - { - bp_addr = bp_address[i]; - if (bp_addr != 0xffffffff) - { - if (!mmu_on) - bp_addr &= 0x7fffffff; - buf[0] = SDI_WRITE_MEMORY; - store_long_parameter (buf + 1, bp_addr & 0xfffffffc); - store_long_parameter (buf + 5, 4); - buf[9] = bp_data[i][0]; - buf[10] = bp_data[i][1]; - buf[11] = bp_data[i][2]; - buf[12] = bp_data[i][3]; - send_data (buf, 13); - } - } - - /* Remove access breaks. */ - hit_watchpoint_addr = 0; - for (i = 0; i < max_access_breaks; i++) - { - if (ab_address[i] != 0x00000000) - { - buf[0] = SDI_READ_MEMORY; - store_long_parameter (buf + 1, 0xffff8100 + 4 * i); - store_long_parameter (buf + 5, 4); - serial_write (sdi_desc, buf, 9); - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - if (c != '-' && recv_data (buf, 4) != -1) - { - if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG) - { - if ((buf[3] & 0x1) == 0x1) - hit_watchpoint_addr = ab_address[i]; - } - else - { - if ((buf[0] & 0x1) == 0x1) - hit_watchpoint_addr = ab_address[i]; - } - } - - send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4, - 0x00000000); - } - } - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "pc => 0x%lx\n", pc_addr); - - return inferior_ptid; -} - -/* Terminate the open connection to the remote debugger. - Use this when you want to detach and do something else - with your gdb. */ -static void -m32r_detach (struct target_ops *ops, const char *args, int from_tty) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_detach(%d)\n", from_tty); - - m32r_resume (ops, inferior_ptid, 0, GDB_SIGNAL_0); - - /* Calls m32r_close to do the real work. */ - unpush_target (ops); - if (from_tty) - fprintf_unfiltered (gdb_stdlog, "Ending remote %s debugging\n", - target_shortname); -} - -/* Return the id of register number REGNO. */ - -static int -get_reg_id (int regno) -{ - switch (regno) - { - case 20: - return SDI_REG_BBPC; - case 21: - return SDI_REG_BPC; - case 22: - return SDI_REG_ACCL; - case 23: - return SDI_REG_ACCH; - case 24: - return SDI_REG_EVB; - } - - return regno; -} - -/* Fetch register REGNO, or all registers if REGNO is -1. - Returns errno value. */ -static void -m32r_fetch_register (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - struct gdbarch *gdbarch = get_regcache_arch (regcache); - enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - unsigned long val, val2, regid; - - if (regno == -1) - { - for (regno = 0; - regno < gdbarch_num_regs (get_regcache_arch (regcache)); - regno++) - m32r_fetch_register (ops, regcache, regno); - } - else - { - gdb_byte buffer[MAX_REGISTER_SIZE]; - - regid = get_reg_id (regno); - send_one_arg_cmd (SDI_READ_CPU_REG, regid); - val = recv_long_data (); - - if (regid == SDI_REG_PSW) - { - send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW); - val2 = recv_long_data (); - val = ((0x00cf & val2) << 8) | ((0xcf00 & val) >> 8); - } - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_fetch_register(%d,0x%08lx)\n", - regno, val); - - /* We got the number the register holds, but gdb expects to see a - value in the target byte ordering. */ - store_unsigned_integer (buffer, 4, byte_order, val); - regcache_raw_supply (regcache, regno, buffer); - } - return; -} - -/* Store register REGNO, or all if REGNO == 0. - Return errno value. */ -static void -m32r_store_register (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - int regid; - ULONGEST regval, tmp; - - if (regno == -1) - { - for (regno = 0; - regno < gdbarch_num_regs (get_regcache_arch (regcache)); - regno++) - m32r_store_register (ops, regcache, regno); - } - else - { - regcache_cooked_read_unsigned (regcache, regno, ®val); - regid = get_reg_id (regno); - - if (regid == SDI_REG_PSW) - { - unsigned long psw, bbpsw; - - send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_PSW); - psw = recv_long_data (); - - send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW); - bbpsw = recv_long_data (); - - tmp = (0x00cf & psw) | ((0x00cf & regval) << 8); - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PSW, tmp); - - tmp = (0x0030 & bbpsw) | ((0xcf00 & regval) >> 8); - send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BBPSW, tmp); - } - else - { - send_two_arg_cmd (SDI_WRITE_CPU_REG, regid, regval); - } - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_store_register(%d,0x%08lu)\n", - regno, (unsigned long) regval); - } -} - -/* Get ready to modify the registers array. On machines which store - individual registers, this doesn't need to do anything. On machines - which store all the registers in one fell swoop, this makes sure - that registers contains all the registers from the program being - debugged. */ - -static void -m32r_prepare_to_store (struct target_ops *self, struct regcache *regcache) -{ - /* Do nothing, since we can store individual regs. */ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_prepare_to_store()\n"); -} - -static void -m32r_files_info (struct target_ops *target) -{ - const char *file = "nothing"; - - if (exec_bfd) - { - file = bfd_get_filename (exec_bfd); - printf_filtered ("\tAttached to %s running program %s\n", - chip_name, file); - } -} - -/* Helper for m32r_xfer_partial that handles memory transfers. - Arguments are like target_xfer_partial. */ - -static enum target_xfer_status -m32r_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf, - ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len) -{ - unsigned long taddr; - unsigned char buf[0x2000]; - int ret, c; - - taddr = memaddr; - - if (!mmu_on) - { - if ((taddr & 0xa0000000) == 0x80000000) - taddr &= 0x7fffffff; - } - - if (remote_debug) - { - if (writebuf != NULL) - fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory(%s,%s,write)\n", - paddress (target_gdbarch (), memaddr), - plongest (len)); - else - fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory(%s,%s,read)\n", - paddress (target_gdbarch (), memaddr), - plongest (len)); - } - - if (writebuf != NULL) - { - buf[0] = SDI_WRITE_MEMORY; - store_long_parameter (buf + 1, taddr); - store_long_parameter (buf + 5, len); - if (len < 0x1000) - { - memcpy (buf + 9, writebuf, len); - ret = send_data (buf, len + 9) - 9; - } - else - { - if (serial_write (sdi_desc, buf, 9) != 0) - { - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, - "m32r_xfer_memory() failed\n"); - return TARGET_XFER_EOF; - } - ret = send_data (writebuf, len); - } - } - else - { - buf[0] = SDI_READ_MEMORY; - store_long_parameter (buf + 1, taddr); - store_long_parameter (buf + 5, len); - if (serial_write (sdi_desc, buf, 9) != 0) - { - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() failed\n"); - return TARGET_XFER_EOF; - } - - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - if (c < 0 || c == '-') - { - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() failed\n"); - return TARGET_XFER_EOF; - } - - ret = recv_data (readbuf, len); - } - - if (ret <= 0) - { - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() fails\n"); - return TARGET_XFER_E_IO; - } - - *xfered_len = ret; - return TARGET_XFER_OK; -} - -/* Target to_xfer_partial implementation. */ - -static enum target_xfer_status -m32r_xfer_partial (struct target_ops *ops, enum target_object object, - const char *annex, gdb_byte *readbuf, - const gdb_byte *writebuf, ULONGEST offset, ULONGEST len, - ULONGEST *xfered_len) -{ - switch (object) - { - case TARGET_OBJECT_MEMORY: - return m32r_xfer_memory (readbuf, writebuf, offset, len, xfered_len); - - default: - return ops->beneath->to_xfer_partial (ops->beneath, object, annex, - readbuf, writebuf, offset, len, - xfered_len); - } -} - -static void -m32r_kill (struct target_ops *ops) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_kill()\n"); - - inferior_ptid = null_ptid; - delete_thread_silent (remote_m32r_ptid); - - return; -} - -/* Clean up when a program exits. - - The program actually lives on in the remote processor's RAM, and may be - run again without a download. Don't leave it full of breakpoint - instructions. */ - -static void -m32r_mourn_inferior (struct target_ops *ops) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_mourn_inferior()\n"); - - remove_breakpoints (); - generic_mourn_inferior (); -} - -static int -m32r_insert_breakpoint (struct target_ops *ops, - struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address; - int ib_breakpoints; - unsigned char buf[13]; - int i, c; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_insert_breakpoint(%s,...)\n", - paddress (gdbarch, addr)); - - if (use_ib_breakpoints) - ib_breakpoints = max_ib_breakpoints; - else - ib_breakpoints = 0; - - for (i = 0; i < MAX_BREAKPOINTS; i++) - { - if (bp_address[i] == 0xffffffff) - { - bp_address[i] = addr; - if (i >= ib_breakpoints) - { - buf[0] = SDI_READ_MEMORY; - if (mmu_on) - store_long_parameter (buf + 1, addr & 0xfffffffc); - else - store_long_parameter (buf + 1, addr & 0x7ffffffc); - store_long_parameter (buf + 5, 4); - serial_write (sdi_desc, buf, 9); - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - if (c != '-') - recv_data (bp_data[i], 4); - } - return 0; - } - } - - error (_("Too many breakpoints")); - return 1; -} - -static int -m32r_remove_breakpoint (struct target_ops *ops, - struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - CORE_ADDR addr = bp_tgt->placed_address; - int i; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_remove_breakpoint(%s)\n", - paddress (gdbarch, addr)); - - for (i = 0; i < MAX_BREAKPOINTS; i++) - { - if (bp_address[i] == addr) - { - bp_address[i] = 0xffffffff; - break; - } - } - - return 0; -} - -static void -m32r_load (struct target_ops *self, const char *args, int from_tty) -{ - struct cleanup *old_chain = make_cleanup (null_cleanup, NULL); - asection *section; - bfd *pbfd; - bfd_vma entry; - char *filename; - int quiet; - int nostart; - struct timeval start_time, end_time; - unsigned long data_count; /* Number of bytes transferred to memory. */ - static sighandler_t prev_sigint; - - /* for direct tcp connections, we can do a fast binary download. */ - quiet = 0; - nostart = 0; - filename = NULL; - - while (*args != '\000') - { - char *arg = extract_arg_const (&args); - - if (arg == NULL) - break; - make_cleanup (xfree, arg); - - if (*arg != '-') - filename = arg; - else if (startswith ("-quiet", arg)) - quiet = 1; - else if (startswith ("-nostart", arg)) - nostart = 1; - else - error (_("Unknown option `%s'"), arg); - } - - if (!filename) - filename = get_exec_file (1); - - pbfd = gdb_bfd_open (filename, gnutarget, -1); - if (pbfd == NULL) - perror_with_name (filename); - make_cleanup_bfd_unref (pbfd); - - if (!bfd_check_format (pbfd, bfd_object)) - error (_("\"%s\" is not an object file: %s"), filename, - bfd_errmsg (bfd_get_error ())); - - gettimeofday (&start_time, NULL); - data_count = 0; - - interrupted = 0; - prev_sigint = signal (SIGINT, gdb_cntrl_c); - - for (section = pbfd->sections; section; section = section->next) - { - if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) - { - bfd_vma section_address; - bfd_size_type section_size; - file_ptr fptr; - int n; - - section_address = bfd_section_lma (pbfd, section); - section_size = bfd_get_section_size (section); - - if (!mmu_on) - { - if ((section_address & 0xa0000000) == 0x80000000) - section_address &= 0x7fffffff; - } - - if (!quiet) - printf_filtered ("[Loading section %s at 0x%lx (%d bytes)]\n", - bfd_get_section_name (pbfd, section), - (unsigned long) section_address, - (int) section_size); - - fptr = 0; - - data_count += section_size; - - n = 0; - while (section_size > 0) - { - char unsigned buf[0x1000 + 9]; - int count; - - count = min (section_size, 0x1000); - - buf[0] = SDI_WRITE_MEMORY; - store_long_parameter (buf + 1, section_address); - store_long_parameter (buf + 5, count); - - bfd_get_section_contents (pbfd, section, buf + 9, fptr, count); - if (send_data (buf, count + 9) <= 0) - error (_("Error while downloading %s section."), - bfd_get_section_name (pbfd, section)); - - if (!quiet) - { - printf_unfiltered ("."); - if (n++ > 60) - { - printf_unfiltered ("\n"); - n = 0; - } - gdb_flush (gdb_stdout); - } - - section_address += count; - fptr += count; - section_size -= count; - - if (interrupted) - break; - } - - if (!quiet && !interrupted) - { - printf_unfiltered ("done.\n"); - gdb_flush (gdb_stdout); - } - } - - if (interrupted) - { - printf_unfiltered ("Interrupted.\n"); - break; - } - } - - interrupted = 0; - signal (SIGINT, prev_sigint); - - gettimeofday (&end_time, NULL); - - /* Make the PC point at the start address. */ - if (exec_bfd) - regcache_write_pc (get_current_regcache (), - bfd_get_start_address (exec_bfd)); - - inferior_ptid = null_ptid; /* No process now. */ - delete_thread_silent (remote_m32r_ptid); - - /* This is necessary because many things were based on the PC at the time - that we attached to the monitor, which is no longer valid now that we - have loaded new code (and just changed the PC). Another way to do this - might be to call normal_stop, except that the stack may not be valid, - and things would get horribly confused... */ - - clear_symtab_users (0); - - if (!nostart) - { - entry = bfd_get_start_address (pbfd); - - if (!quiet) - printf_unfiltered ("[Starting %s at 0x%lx]\n", filename, - (unsigned long) entry); - } - - print_transfer_performance (gdb_stdout, data_count, 0, &start_time, - &end_time); - - do_cleanups (old_chain); -} - -static void -m32r_interrupt (struct target_ops *self, ptid_t ptid) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_interrupt()\n"); - - send_cmd (SDI_STOP_CPU); - - return; -} - - -/* Tell whether this target can support a hardware breakpoint. CNT - is the number of hardware breakpoints already installed. This - implements the target_can_use_hardware_watchpoint macro. */ - -static int -m32r_can_use_hw_watchpoint (struct target_ops *self, - enum bptype type, - int cnt, int othertype) -{ - return sdi_desc != NULL && cnt < max_access_breaks; -} - -/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0 - for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write - watchpoint. */ - -static int -m32r_insert_watchpoint (struct target_ops *self, - CORE_ADDR addr, int len, enum target_hw_bp_type type, - struct expression *cond) -{ - int i; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_insert_watchpoint(%s,%d,%d)\n", - paddress (target_gdbarch (), addr), len, type); - - for (i = 0; i < MAX_ACCESS_BREAKS; i++) - { - if (ab_address[i] == 0x00000000) - { - ab_address[i] = addr; - ab_size[i] = len; - ab_type[i] = type; - return 0; - } - } - - error (_("Too many watchpoints")); - return 1; -} - -static int -m32r_remove_watchpoint (struct target_ops *self, CORE_ADDR addr, int len, - enum target_hw_bp_type type, struct expression *cond) -{ - int i; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_remove_watchpoint(%s,%d,%d)\n", - paddress (target_gdbarch (), addr), len, type); - - for (i = 0; i < MAX_ACCESS_BREAKS; i++) - { - if (ab_address[i] == addr) - { - ab_address[i] = 0x00000000; - break; - } - } - - return 0; -} - -static int -m32r_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p) -{ - int rc = 0; - - if (hit_watchpoint_addr != 0x00000000) - { - *addr_p = hit_watchpoint_addr; - rc = 1; - } - return rc; -} - -static int -m32r_stopped_by_watchpoint (struct target_ops *ops) -{ - CORE_ADDR addr; - - return m32r_stopped_data_address (¤t_target, &addr); -} - -/* Check to see if a thread is still alive. */ - -static int -m32r_thread_alive (struct target_ops *ops, ptid_t ptid) -{ - if (ptid_equal (ptid, remote_m32r_ptid)) - /* The main task is always alive. */ - return 1; - - return 0; -} - -/* Convert a thread ID to a string. Returns the string in a static - buffer. */ - -static char * -m32r_pid_to_str (struct target_ops *ops, ptid_t ptid) -{ - static char buf[64]; - - if (ptid_equal (remote_m32r_ptid, ptid)) - { - xsnprintf (buf, sizeof buf, "Thread <main>"); - return buf; - } - - return normal_pid_to_str (ptid); -} - -static void -sdireset_command (char *args, int from_tty) -{ - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_sdireset()\n"); - - send_cmd (SDI_OPEN); - - inferior_ptid = null_ptid; - delete_thread_silent (remote_m32r_ptid); -} - - -static void -sdistatus_command (char *args, int from_tty) -{ - unsigned char buf[4096]; - int i, c; - - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "m32r_sdireset()\n"); - - if (!sdi_desc) - return; - - send_cmd (SDI_STATUS); - for (i = 0; i < 4096; i++) - { - c = serial_readchar (sdi_desc, SDI_TIMEOUT); - if (c < 0) - return; - buf[i] = c; - if (c == 0) - break; - } - - printf_filtered ("%s", buf); -} - - -static void -debug_chaos_command (char *args, int from_tty) -{ - unsigned char buf[3]; - - buf[0] = SDI_SET_ATTR; - buf[1] = SDI_ATTR_CACHE; - buf[2] = SDI_CACHE_TYPE_CHAOS; - send_data (buf, 3); -} - - -static void -use_debug_dma_command (char *args, int from_tty) -{ - unsigned char buf[3]; - - buf[0] = SDI_SET_ATTR; - buf[1] = SDI_ATTR_MEM_ACCESS; - buf[2] = SDI_MEM_ACCESS_DEBUG_DMA; - send_data (buf, 3); -} - -static void -use_mon_code_command (char *args, int from_tty) -{ - unsigned char buf[3]; - - buf[0] = SDI_SET_ATTR; - buf[1] = SDI_ATTR_MEM_ACCESS; - buf[2] = SDI_MEM_ACCESS_MON_CODE; - send_data (buf, 3); -} - - -static void -use_ib_breakpoints_command (char *args, int from_tty) -{ - use_ib_breakpoints = 1; -} - -static void -use_dbt_breakpoints_command (char *args, int from_tty) -{ - use_ib_breakpoints = 0; -} - -static int -m32r_return_one (struct target_ops *target) -{ - return 1; -} - -/* Implementation of the to_has_execution method. */ - -static int -m32r_has_execution (struct target_ops *target, ptid_t the_ptid) -{ - return 1; -} - -/* Define the target subroutine names. */ - -struct target_ops m32r_ops; - -static void -init_m32r_ops (void) -{ - m32r_ops.to_shortname = "m32rsdi"; - m32r_ops.to_longname = "Remote M32R debugging over SDI interface"; - m32r_ops.to_doc = "Use an M32R board using SDI debugging protocol."; - m32r_ops.to_open = m32r_open; - m32r_ops.to_close = m32r_close; - m32r_ops.to_detach = m32r_detach; - m32r_ops.to_resume = m32r_resume; - m32r_ops.to_wait = m32r_wait; - m32r_ops.to_fetch_registers = m32r_fetch_register; - m32r_ops.to_store_registers = m32r_store_register; - m32r_ops.to_prepare_to_store = m32r_prepare_to_store; - m32r_ops.to_xfer_partial = m32r_xfer_partial; - m32r_ops.to_files_info = m32r_files_info; - m32r_ops.to_insert_breakpoint = m32r_insert_breakpoint; - m32r_ops.to_remove_breakpoint = m32r_remove_breakpoint; - m32r_ops.to_can_use_hw_breakpoint = m32r_can_use_hw_watchpoint; - m32r_ops.to_insert_watchpoint = m32r_insert_watchpoint; - m32r_ops.to_remove_watchpoint = m32r_remove_watchpoint; - m32r_ops.to_stopped_by_watchpoint = m32r_stopped_by_watchpoint; - m32r_ops.to_stopped_data_address = m32r_stopped_data_address; - m32r_ops.to_kill = m32r_kill; - m32r_ops.to_load = m32r_load; - m32r_ops.to_create_inferior = m32r_create_inferior; - m32r_ops.to_mourn_inferior = m32r_mourn_inferior; - m32r_ops.to_interrupt = m32r_interrupt; - m32r_ops.to_log_command = serial_log_command; - m32r_ops.to_thread_alive = m32r_thread_alive; - m32r_ops.to_pid_to_str = m32r_pid_to_str; - m32r_ops.to_stratum = process_stratum; - m32r_ops.to_has_all_memory = m32r_return_one; - m32r_ops.to_has_memory = m32r_return_one; - m32r_ops.to_has_stack = m32r_return_one; - m32r_ops.to_has_registers = m32r_return_one; - m32r_ops.to_has_execution = m32r_has_execution; - m32r_ops.to_magic = OPS_MAGIC; -}; - - -extern initialize_file_ftype _initialize_remote_m32r; - -void -_initialize_remote_m32r (void) -{ - int i; - - init_m32r_ops (); - - /* Initialize breakpoints. */ - for (i = 0; i < MAX_BREAKPOINTS; i++) - bp_address[i] = 0xffffffff; - - /* Initialize access breaks. */ - for (i = 0; i < MAX_ACCESS_BREAKS; i++) - ab_address[i] = 0x00000000; - - add_target (&m32r_ops); - - add_com ("sdireset", class_obscure, sdireset_command, - _("Reset SDI connection.")); - - add_com ("sdistatus", class_obscure, sdistatus_command, - _("Show status of SDI connection.")); - - add_com ("debug_chaos", class_obscure, debug_chaos_command, - _("Debug M32R/Chaos.")); - - add_com ("use_debug_dma", class_obscure, use_debug_dma_command, - _("Use debug DMA mem access.")); - add_com ("use_mon_code", class_obscure, use_mon_code_command, - _("Use mon code mem access.")); - - add_com ("use_ib_break", class_obscure, use_ib_breakpoints_command, - _("Set breakpoints by IB break.")); - add_com ("use_dbt_break", class_obscure, use_dbt_breakpoints_command, - _("Set breakpoints by dbt.")); - - /* Yes, 42000 is arbitrary. The only sense out of it, is that it - isn't 0. */ - remote_m32r_ptid = ptid_build (42000, 0, 42000); -} diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c deleted file mode 100644 index 2f6663b..0000000 --- a/gdb/remote-mips.c +++ /dev/null @@ -1,3771 +0,0 @@ -/* Remote debugging interface for MIPS remote debugging protocol. - - Copyright (C) 1993-2016 Free Software Foundation, Inc. - - Contributed by Cygnus Support. Written by Ian Lance Taylor - <ian@cygnus.com>. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -#include "defs.h" -#include "inferior.h" -#include "infrun.h" -#include "bfd.h" -#include "symfile.h" -#include "gdbcmd.h" -#include "gdbcore.h" -#include "serial.h" -#include "target.h" -#include <sys/stat.h> -#include "gdb_usleep.h" -#include "regcache.h" -#include <ctype.h> -#include "mips-tdep.h" -#include "gdbthread.h" -#include "gdb_bfd.h" - - -/* Breakpoint types. Values 0, 1, and 2 must agree with the watch - types passed by breakpoint.c to target_insert_watchpoint. - Value 3 is our own invention, and is used for ordinary instruction - breakpoints. Value 4 is used to mark an unused watchpoint in tables. */ -enum break_type - { - BREAK_WRITE, /* 0 */ - BREAK_READ, /* 1 */ - BREAK_ACCESS, /* 2 */ - BREAK_FETCH, /* 3 */ - BREAK_UNUSED /* 4 */ - }; - -/* Prototypes for local functions. */ - -static int mips_readchar (int timeout); - -static int mips_receive_header (unsigned char *hdr, int *pgarbage, - int ch, int timeout); - -static int mips_receive_trailer (unsigned char *trlr, int *pgarbage, - int *pch, int timeout); - -static int mips_cksum (const unsigned char *hdr, - const char *data, int len); - -static void mips_send_packet (const char *s, int get_ack); - -static void mips_send_command (const char *cmd, int prompt); - -static int mips_receive_packet (char *buff, int throw_error, int timeout); - -static ULONGEST mips_request (int cmd, ULONGEST addr, ULONGEST data, - int *perr, int timeout, char *buff); - -static void mips_initialize (void); - -static void mips_close (struct target_ops *self); - -static int mips_map_regno (struct gdbarch *, int); - -static void mips_set_register (int regno, ULONGEST value); - -static void mips_prepare_to_store (struct target_ops *self, - struct regcache *regcache); - -static int mips_fetch_word (CORE_ADDR addr, unsigned int *valp); - -static int mips_store_word (CORE_ADDR addr, unsigned int value, - int *old_contents); - -static enum target_xfer_status mips_xfer_memory (gdb_byte *readbuf, - const gdb_byte *writebuf, - ULONGEST memaddr, - ULONGEST len, - ULONGEST *xfered_len); - -static void mips_files_info (struct target_ops *ignore); - -static void mips_mourn_inferior (struct target_ops *ops); - -static int pmon_makeb64 (unsigned long v, char *p, int n, unsigned int *chksum); - -static int pmon_zeroset (int recsize, char **buff, unsigned int *amount, - unsigned int *chksum); - -static int pmon_checkset (int recsize, char **buff, unsigned int *value); - -static void pmon_make_fastrec (char **outbuf, unsigned char *inbuf, - int *inptr, int inamount, int *recsize, - unsigned int *csum, unsigned int *zerofill); - -static int pmon_check_ack (char *mesg); - -static void pmon_start_download (void); - -static void pmon_end_download (int final, int bintotal); - -static void pmon_download (char *buffer, int length); - -static void mips_load (struct target_ops *self, const char *file, int from_tty); - -static int mips_make_srec (char *buffer, int type, CORE_ADDR memaddr, - unsigned char *myaddr, int len); - -static int mips_set_breakpoint (CORE_ADDR addr, int len, enum break_type type); - -static int mips_clear_breakpoint (CORE_ADDR addr, int len, - enum break_type type); - -static int mips_common_breakpoint (int set, CORE_ADDR addr, int len, - enum break_type type); - -/* Forward declarations. */ -extern struct target_ops mips_ops; -extern struct target_ops pmon_ops; -extern struct target_ops ddb_ops; -extern struct target_ops rockhopper_ops; - /* *INDENT-OFF* */ -/* The MIPS remote debugging interface is built on top of a simple - packet protocol. Each packet is organized as follows: - - SYN The first character is always a SYN (ASCII 026, or ^V). SYN - may not appear anywhere else in the packet. Any time a SYN is - seen, a new packet should be assumed to have begun. - - TYPE_LEN - This byte contains the upper five bits of the logical length - of the data section, plus a single bit indicating whether this - is a data packet or an acknowledgement. The documentation - indicates that this bit is 1 for a data packet, but the actual - board uses 1 for an acknowledgement. The value of the byte is - 0x40 + (ack ? 0x20 : 0) + (len >> 6) - (we always have 0 <= len < 1024). Acknowledgement packets do - not carry data, and must have a data length of 0. - - LEN1 This byte contains the lower six bits of the logical length of - the data section. The value is - 0x40 + (len & 0x3f) - - SEQ This byte contains the six bit sequence number of the packet. - The value is - 0x40 + seq - An acknowlegment packet contains the sequence number of the - packet being acknowledged plus 1 modulo 64. Data packets are - transmitted in sequence. There may only be one outstanding - unacknowledged data packet at a time. The sequence numbers - are independent in each direction. If an acknowledgement for - the previous packet is received (i.e., an acknowledgement with - the sequence number of the packet just sent) the packet just - sent should be retransmitted. If no acknowledgement is - received within a timeout period, the packet should be - retransmitted. This has an unfortunate failure condition on a - high-latency line, as a delayed acknowledgement may lead to an - endless series of duplicate packets. - - DATA The actual data bytes follow. The following characters are - escaped inline with DLE (ASCII 020, or ^P): - SYN (026) DLE S - DLE (020) DLE D - ^C (003) DLE C - ^S (023) DLE s - ^Q (021) DLE q - The additional DLE characters are not counted in the logical - length stored in the TYPE_LEN and LEN1 bytes. - - CSUM1 - CSUM2 - CSUM3 - These bytes contain an 18 bit checksum of the complete - contents of the packet excluding the SEQ byte and the - CSUM[123] bytes. The checksum is simply the twos complement - addition of all the bytes treated as unsigned characters. The - values of the checksum bytes are: - CSUM1: 0x40 + ((cksum >> 12) & 0x3f) - CSUM2: 0x40 + ((cksum >> 6) & 0x3f) - CSUM3: 0x40 + (cksum & 0x3f) - - It happens that the MIPS remote debugging protocol always - communicates with ASCII strings. Because of this, this - implementation doesn't bother to handle the DLE quoting mechanism, - since it will never be required. */ -/* *INDENT-ON* */ - - -/* The SYN character which starts each packet. */ -#define SYN '\026' - -/* The 0x40 used to offset each packet (this value ensures that all of - the header and trailer bytes, other than SYN, are printable ASCII - characters). */ -#define HDR_OFFSET 0x40 - -/* The indices of the bytes in the packet header. */ -#define HDR_INDX_SYN 0 -#define HDR_INDX_TYPE_LEN 1 -#define HDR_INDX_LEN1 2 -#define HDR_INDX_SEQ 3 -#define HDR_LENGTH 4 - -/* The data/ack bit in the TYPE_LEN header byte. */ -#define TYPE_LEN_DA_BIT 0x20 -#define TYPE_LEN_DATA 0 -#define TYPE_LEN_ACK TYPE_LEN_DA_BIT - -/* How to compute the header bytes. */ -#define HDR_SET_SYN(data, len, seq) (SYN) -#define HDR_SET_TYPE_LEN(data, len, seq) \ - (HDR_OFFSET \ - + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \ - + (((len) >> 6) & 0x1f)) -#define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f)) -#define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq)) - -/* Check that a header byte is reasonable. */ -#define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET) - -/* Get data from the header. These macros evaluate their argument - multiple times. */ -#define HDR_IS_DATA(hdr) \ - (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA) -#define HDR_GET_LEN(hdr) \ - ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f))) -#define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f) - -/* The maximum data length. */ -#define DATA_MAXLEN 1023 - -/* The trailer offset. */ -#define TRLR_OFFSET HDR_OFFSET - -/* The indices of the bytes in the packet trailer. */ -#define TRLR_INDX_CSUM1 0 -#define TRLR_INDX_CSUM2 1 -#define TRLR_INDX_CSUM3 2 -#define TRLR_LENGTH 3 - -/* How to compute the trailer bytes. */ -#define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f)) -#define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >> 6) & 0x3f)) -#define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum) ) & 0x3f)) - -/* Check that a trailer byte is reasonable. */ -#define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET) - -/* Get data from the trailer. This evaluates its argument multiple - times. */ -#define TRLR_GET_CKSUM(trlr) \ - ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \ - + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) << 6) \ - + ((trlr)[TRLR_INDX_CSUM3] & 0x3f)) - -/* The sequence number modulos. */ -#define SEQ_MODULOS (64) - -/* PMON commands to load from the serial port or UDP socket. */ -#define LOAD_CMD "load -b -s tty0\r" -#define LOAD_CMD_UDP "load -b -s udp\r" - -/* The target vectors for the four different remote MIPS targets. - These are initialized with code in _initialize_remote_mips instead - of static initializers, to make it easier to extend the target_ops - vector later. */ -struct target_ops mips_ops, pmon_ops, ddb_ops, rockhopper_ops, lsi_ops; - -enum mips_monitor_type - { - /* IDT/SIM monitor being used: */ - MON_IDT, - /* PMON monitor being used: */ - MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] - Algorithmics Ltd. Nov 9 1995 17:19:50 */ - MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] - Risq Modular Systems, - Thu Jun 6 09:28:40 PDT 1996 */ - MON_LSI, /* 4.3.12 [EB,FP], - LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */ - MON_ROCKHOPPER, - /* Last and unused value, for sizing vectors, etc. */ - MON_LAST - }; -static enum mips_monitor_type mips_monitor = MON_LAST; - -/* The monitor prompt text. If the user sets the PMON prompt - to some new value, the GDB `set monitor-prompt' command must also - be used to inform GDB about the expected prompt. Otherwise, GDB - will not be able to connect to PMON in mips_initialize(). - If the `set monitor-prompt' command is not used, the expected - default prompt will be set according the target: - target prompt - ----- ----- - pmon PMON> - ddb NEC010> - lsi PMON> - */ -static char *mips_monitor_prompt; - -/* Set to 1 if the target is open. */ -static int mips_is_open; - -/* Currently active target description (if mips_is_open == 1). */ -static struct target_ops *current_ops; - -/* Set to 1 while the connection is being initialized. */ -static int mips_initializing; - -/* Set to 1 while the connection is being brought down. */ -static int mips_exiting; - -/* The next sequence number to send. */ -static unsigned int mips_send_seq; - -/* The next sequence number we expect to receive. */ -static unsigned int mips_receive_seq; - -/* The time to wait before retransmitting a packet, in seconds. */ -static int mips_retransmit_wait = 3; - -/* The number of times to try retransmitting a packet before giving up. */ -static int mips_send_retries = 10; - -/* The number of garbage characters to accept when looking for an - SYN for the next packet. */ -static int mips_syn_garbage = 10; - -/* The time to wait for a packet, in seconds. */ -static int mips_receive_wait = 5; - -/* Set if we have sent a packet to the board but have not yet received - a reply. */ -static int mips_need_reply = 0; - -/* Handle used to access serial I/O stream. */ -static struct serial *mips_desc; - -/* UDP handle used to download files to target. */ -static struct serial *udp_desc; -static int udp_in_use; - -/* TFTP filename used to download files to DDB board, in the form - host:filename. */ -static char *tftp_name; /* host:filename */ -static char *tftp_localname; /* filename portion of above */ -static int tftp_in_use; -static FILE *tftp_file; - -/* Counts the number of times the user tried to interrupt the target (usually - via ^C. */ -static int interrupt_count; - -/* If non-zero, means that the target is running. */ -static int mips_wait_flag = 0; - -/* If non-zero, monitor supports breakpoint commands. */ -static int monitor_supports_breakpoints = 0; - -/* Data cache header. */ - -#if 0 /* not used (yet?) */ -static DCACHE *mips_dcache; -#endif - -/* Non-zero means that we've just hit a read or write watchpoint. */ -static int hit_watchpoint; - -/* Table of breakpoints/watchpoints (used only on LSI PMON target). - The table is indexed by a breakpoint number, which is an integer - from 0 to 255 returned by the LSI PMON when a breakpoint is set. */ - -#define MAX_LSI_BREAKPOINTS 256 -struct lsi_breakpoint_info - { - enum break_type type; /* type of breakpoint */ - CORE_ADDR addr; /* address of breakpoint */ - int len; /* length of region being watched */ - unsigned long value; /* value to watch */ - } -lsi_breakpoints[MAX_LSI_BREAKPOINTS]; - -/* Error/warning codes returned by LSI PMON for breakpoint commands. - Warning values may be ORed together; error values may not. */ -#define W_WARN 0x100 /* This bit is set if the error code - is a warning */ -#define W_MSK 0x101 /* warning: Range feature is supported - via mask */ -#define W_VAL 0x102 /* warning: Value check is not - supported in hardware */ -#define W_QAL 0x104 /* warning: Requested qualifiers are - not supported in hardware */ - -#define E_ERR 0x200 /* This bit is set if the error code - is an error */ -#define E_BPT 0x200 /* error: No such breakpoint number */ -#define E_RGE 0x201 /* error: Range is not supported */ -#define E_QAL 0x202 /* error: The requested qualifiers can - not be used */ -#define E_OUT 0x203 /* error: Out of hardware resources */ -#define E_NON 0x204 /* error: Hardware breakpoint not supported */ - -struct lsi_error - { - int code; /* error code */ - char *string; /* string associated with this code */ - }; - -struct lsi_error lsi_warning_table[] = -{ - {W_MSK, "Range feature is supported via mask"}, - {W_VAL, "Value check is not supported in hardware"}, - {W_QAL, "Requested qualifiers are not supported in hardware"}, - {0, NULL} -}; - -struct lsi_error lsi_error_table[] = -{ - {E_BPT, "No such breakpoint number"}, - {E_RGE, "Range is not supported"}, - {E_QAL, "The requested qualifiers can not be used"}, - {E_OUT, "Out of hardware resources"}, - {E_NON, "Hardware breakpoint not supported"}, - {0, NULL} -}; - -/* Set to 1 with the 'set monitor-warnings' command to enable printing - of warnings returned by PMON when hardware breakpoints are used. */ -static int monitor_warnings; - -/* This is the ptid we use while we're connected to the remote. Its - value is arbitrary, as the remote-mips target doesn't have a notion of - processes or threads, but we need something non-null to place in - inferior_ptid. */ -static ptid_t remote_mips_ptid; - -/* Close any ports which might be open. Reset certain globals indicating - the state of those ports. */ - -static void -close_ports (void) -{ - mips_is_open = 0; - serial_close (mips_desc); - - if (udp_in_use) - { - serial_close (udp_desc); - udp_in_use = 0; - } - tftp_in_use = 0; -} - -/* Handle low-level error that we can't recover from. Note that just - error()ing out from target_wait or some such low-level place will cause - all hell to break loose--the rest of GDB will tend to get left in an - inconsistent state. */ - -static void ATTRIBUTE_NORETURN -mips_error (char *string,...) -{ - va_list args; - char *fmt; - - target_terminal_ours (); - wrap_here (""); /* Force out any buffered output. */ - gdb_flush (gdb_stdout); - gdb_flush (gdb_stderr); - - /* Clean up in such a way that mips_close won't try to talk to the - board (it almost surely won't work since we weren't able to talk to - it). */ - close_ports (); - - if (!ptid_equal (inferior_ptid, null_ptid)) - target_mourn_inferior (); - - fmt = concat (_("Ending remote MIPS debugging: "), - string, (char *) NULL); - make_cleanup (xfree, fmt); - - va_start (args, string); - throw_verror (TARGET_CLOSE_ERROR, fmt, args); - va_end (args); -} - -/* putc_readable - print a character, displaying non-printable chars in - ^x notation or in hex. */ - -static void -fputc_readable (int ch, struct ui_file *file) -{ - if (ch == '\n') - fputc_unfiltered ('\n', file); - else if (ch == '\r') - fprintf_unfiltered (file, "\\r"); - else if (ch < 0x20) /* ASCII control character */ - fprintf_unfiltered (file, "^%c", ch + '@'); - else if (ch >= 0x7f) /* non-ASCII characters (rubout or greater) */ - fprintf_unfiltered (file, "[%02x]", ch & 0xff); - else - fputc_unfiltered (ch, file); -} - - -/* puts_readable - print a string, displaying non-printable chars in - ^x notation or in hex. */ - -static void -fputs_readable (const char *string, struct ui_file *file) -{ - int c; - - while ((c = *string++) != '\0') - fputc_readable (c, file); -} - - -/* Read P as a hex value. Return true if every character made sense, - storing the result in *RESULT. Leave *RESULT unchanged otherwise. */ - -static int -read_hex_value (const char *p, ULONGEST *result) -{ - ULONGEST retval; - - retval = 0; - while (*p != 0) - { - retval <<= 4; - if (*p >= '0' && *p <= '9') - retval |= *p - '0'; - else if (*p >= 'A' && *p <= 'F') - retval |= *p - 'A' + 10; - else if (*p >= 'a' && *p <= 'f') - retval |= *p - 'a' + 10; - else - return 0; - p++; - } - *result = retval; - return 1; -} - - -/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if - timed out. TIMEOUT specifies timeout value in seconds. */ - -static int -mips_expect_timeout (const char *string, int timeout) -{ - const char *p = string; - - if (remote_debug) - { - fprintf_unfiltered (gdb_stdlog, "Expected \""); - fputs_readable (string, gdb_stdlog); - fprintf_unfiltered (gdb_stdlog, "\", got \""); - } - - immediate_quit++; - QUIT; - while (1) - { - int c; - - /* Must use serial_readchar() here cuz mips_readchar would get - confused if we were waiting for the mips_monitor_prompt... */ - - c = serial_readchar (mips_desc, timeout); - - if (c == SERIAL_TIMEOUT) - { - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "\": FAIL\n"); - return 0; - } - - if (remote_debug) - fputc_readable (c, gdb_stdlog); - - if (c == *p++) - { - if (*p == '\0') - { - immediate_quit--; - if (remote_debug) - fprintf_unfiltered (gdb_stdlog, "\": OK\n"); - return 1; - } - } - else - { - p = string; - if (c == *p) - p++; - } - } -} - -/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if - timed out. The timeout value is hard-coded to 2 seconds. Use - mips_expect_timeout if a different timeout value is needed. */ - -static int -mips_expect (const char *string) -{ - return mips_expect_timeout (string, remote_timeout); -} - -/* Read a character from the remote, aborting on error. Returns - SERIAL_TIMEOUT on timeout (since that's what serial_readchar() - returns). FIXME: If we see the string mips_monitor_prompt from the - board, then we are debugging on the main console port, and we have - somehow dropped out of remote debugging mode. In this case, we - automatically go back in to remote debugging mode. This is a hack, - put in because I can't find any way for a program running on the - remote board to terminate without also ending remote debugging - mode. I assume users won't have any trouble with this; for one - thing, the IDT documentation generally assumes that the remote - debugging port is not the console port. This is, however, very - convenient for DejaGnu when you only have one connected serial - port. */ - -static int -mips_readchar (int timeout) -{ - int ch; - static int state = 0; - int mips_monitor_prompt_len = strlen (mips_monitor_prompt); - - { /* FIXME this whole block is dead code! */ - int i; - - i = timeout; - if (i == -1 && watchdog > 0) - i = watchdog; - } - - if (state == mips_monitor_prompt_len) - timeout = 1; - ch = serial_readchar (mips_desc, timeout); - - if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off. */ - { - target_mourn_inferior (); - error (_("Watchdog has expired. Target detached.")); - } - - if (ch == SERIAL_EOF) - mips_error (_("End of file from remote")); - if (ch == SERIAL_ERROR) - mips_error (_("Error reading from remote: %s"), safe_strerror (errno)); - if (remote_debug > 1) - { - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - if (ch != SERIAL_TIMEOUT) - fprintf_unfiltered (gdb_stdlog, "Read '%c' %d 0x%x\n", ch, ch, ch); - else - fprintf_unfiltered (gdb_stdlog, "Timed out in read\n"); - } - - /* If we have seen mips_monitor_prompt and we either time out, or - we see a @ (which was echoed from a packet we sent), reset the - board as described above. The first character in a packet after - the SYN (which is not echoed) is always an @ unless the packet is - more than 64 characters long, which ours never are. */ - if ((ch == SERIAL_TIMEOUT || ch == '@') - && state == mips_monitor_prompt_len - && !mips_initializing - && !mips_exiting) - { - if (remote_debug > 0) - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - fprintf_unfiltered (gdb_stdlog, - "Reinitializing MIPS debugging mode\n"); - - mips_need_reply = 0; - mips_initialize (); - - state = 0; - - /* At this point, about the only thing we can do is abort the command - in progress and get back to command level as quickly as possible. */ - - error (_("Remote board reset, debug protocol re-initialized.")); - } - - if (ch == mips_monitor_prompt[state]) - ++state; - else - state = 0; - - return ch; -} - -/* Get a packet header, putting the data in the supplied buffer. - PGARBAGE is a pointer to the number of garbage characters received - so far. CH is the last character received. Returns 0 for success, - or -1 for timeout. */ - -static int -mips_receive_header (unsigned char *hdr, int *pgarbage, int ch, int timeout) -{ - int i; - - while (1) - { - /* Wait for a SYN. mips_syn_garbage is intended to prevent - sitting here indefinitely if the board sends us one garbage - character per second. ch may already have a value from the - last time through the loop. */ - while (ch != SYN) - { - ch = mips_readchar (timeout); - if (ch == SERIAL_TIMEOUT) - return -1; - if (ch != SYN) - { - /* Printing the character here lets the user of gdb see - what the program is outputting, if the debugging is - being done on the console port. Don't use _filtered: - we can't deal with a QUIT out of target_wait and - buffered target output confuses the user. */ - if (!mips_initializing || remote_debug > 0) - { - if (isprint (ch) || isspace (ch)) - { - fputc_unfiltered (ch, gdb_stdtarg); - } - else - { - fputc_readable (ch, gdb_stdtarg); - } - gdb_flush (gdb_stdtarg); - } - - /* Only count unprintable characters. */ - if (! (isprint (ch) || isspace (ch))) - (*pgarbage) += 1; - - if (mips_syn_garbage > 0 - && *pgarbage > mips_syn_garbage) - mips_error (_("Debug protocol failure: more " - "than %d characters before a sync."), - mips_syn_garbage); - } - } - - /* Get the packet header following the SYN. */ - for (i = 1; i < HDR_LENGTH; i++) - { - ch = mips_readchar (timeout); - if (ch == SERIAL_TIMEOUT) - return -1; - /* Make sure this is a header byte. */ - if (ch == SYN || !HDR_CHECK (ch)) - break; - - hdr[i] = ch; - } - - /* If we got the complete header, we can return. Otherwise we - loop around and keep looking for SYN. */ - if (i >= HDR_LENGTH) - return 0; - } -} - -/* Get a packet header, putting the data in the supplied buffer. - PGARBAGE is a pointer to the number of garbage characters received - so far. The last character read is returned in *PCH. Returns 0 - for success, -1 for timeout, -2 for error. */ - -static int -mips_receive_trailer (unsigned char *trlr, int *pgarbage, - int *pch, int timeout) -{ - int i; - int ch; - - for (i = 0; i < TRLR_LENGTH; i++) - { - ch = mips_readchar (timeout); - *pch = ch; - if (ch == SERIAL_TIMEOUT) - return -1; - if (!TRLR_CHECK (ch)) - return -2; - trlr[i] = ch; - } - return 0; -} - -/* Get the checksum of a packet. HDR points to the packet header. - DATASTR points to the packet data. LEN is the length of DATASTR. */ - -static int -mips_cksum (const unsigned char *hdr, const char *datastr, int len) -{ - const unsigned char *p; - const unsigned char *data = (const unsigned char *) datastr; - int c; - int cksum; - - cksum = 0; - - /* The initial SYN is not included in the checksum. */ - c = HDR_LENGTH - 1; - p = hdr + 1; - while (c-- != 0) - cksum += *p++; - - c = len; - p = data; - while (c-- != 0) - cksum += *p++; - - return cksum; -} - -/* Send a packet containing the given ASCII string. */ - -static void -mips_send_packet (const char *s, int get_ack) -{ - /* unsigned */ int len; - unsigned char *packet; - int cksum; - int attempt; - - len = strlen (s); - if (len > DATA_MAXLEN) - mips_error (_("MIPS protocol data packet too long: %s"), s); - - packet = (unsigned char *) alloca (HDR_LENGTH + len + TRLR_LENGTH + 1); - - packet[HDR_INDX_SYN] = HDR_SET_SYN (1, len, mips_send_seq); - packet[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (1, len, mips_send_seq); - packet[HDR_INDX_LEN1] = HDR_SET_LEN1 (1, len, mips_send_seq); - packet[HDR_INDX_SEQ] = HDR_SET_SEQ (1, len, mips_send_seq); - - memcpy (packet + HDR_LENGTH, s, len); - - cksum = mips_cksum (packet, (char *) packet + HDR_LENGTH, len); - packet[HDR_LENGTH + len + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); - packet[HDR_LENGTH + len + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); - packet[HDR_LENGTH + len + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); - - /* Increment the sequence number. This will set mips_send_seq to - the sequence number we expect in the acknowledgement. */ - mips_send_seq = (mips_send_seq + 1) % SEQ_MODULOS; - - /* We can only have one outstanding data packet, so we just wait for - the acknowledgement here. Keep retransmitting the packet until - we get one, or until we've tried too many times. */ - for (attempt = 0; attempt < mips_send_retries; attempt++) - { - int garbage; - int ch; - - if (remote_debug > 0) - { - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - packet[HDR_LENGTH + len + TRLR_LENGTH] = '\0'; - fprintf_unfiltered (gdb_stdlog, "Writing \"%s\"\n", packet + 1); - } - - if (serial_write (mips_desc, packet, - HDR_LENGTH + len + TRLR_LENGTH) != 0) - mips_error (_("write to target failed: %s"), safe_strerror (errno)); - - if (!get_ack) - return; - - garbage = 0; - ch = 0; - while (1) - { - unsigned char hdr[HDR_LENGTH + 1]; - unsigned char trlr[TRLR_LENGTH + 1]; - int err; - unsigned int seq; - - /* Get the packet header. If we time out, resend the data - packet. */ - err = mips_receive_header (hdr, &garbage, ch, mips_retransmit_wait); - if (err != 0) - break; - - ch = 0; - - /* If we get a data packet, assume it is a duplicate and - ignore it. FIXME: If the acknowledgement is lost, this - data packet may be the packet the remote sends after the - acknowledgement. */ - if (HDR_IS_DATA (hdr)) - { - int i; - - /* Ignore any errors raised whilst attempting to ignore - packet. */ - - len = HDR_GET_LEN (hdr); - - for (i = 0; i < len; i++) - { - int rch; - - rch = mips_readchar (remote_timeout); - if (rch == SYN) - { - ch = SYN; - break; - } - if (rch == SERIAL_TIMEOUT) - break; - /* Ignore the character. */ - } - - if (i == len) - (void) mips_receive_trailer (trlr, &garbage, &ch, - remote_timeout); - - /* We don't bother checking the checksum, or providing an - ACK to the packet. */ - continue; - } - - /* If the length is not 0, this is a garbled packet. */ - if (HDR_GET_LEN (hdr) != 0) - continue; - - /* Get the packet trailer. */ - err = mips_receive_trailer (trlr, &garbage, &ch, - mips_retransmit_wait); - - /* If we timed out, resend the data packet. */ - if (err == -1) - break; - - /* If we got a bad character, reread the header. */ - if (err != 0) - continue; - - /* If the checksum does not match the trailer checksum, this - is a bad packet; ignore it. */ - if (mips_cksum (hdr, NULL, 0) != TRLR_GET_CKSUM (trlr)) - continue; - - if (remote_debug > 0) - { - hdr[HDR_LENGTH] = '\0'; - trlr[TRLR_LENGTH] = '\0'; - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - fprintf_unfiltered (gdb_stdlog, "Got ack %d \"%s%s\"\n", - HDR_GET_SEQ (hdr), hdr + 1, trlr); - } - - /* If this ack is for the current packet, we're done. */ - seq = HDR_GET_SEQ (hdr); - if (seq == mips_send_seq) - return; - - /* If this ack is for the last packet, resend the current - packet. */ - if ((seq + 1) % SEQ_MODULOS == mips_send_seq) - break; - - /* Otherwise this is a bad ack; ignore it. Increment the - garbage count to ensure that we do not stay in this loop - forever. */ - ++garbage; - } - } - - mips_error (_("Remote did not acknowledge packet")); -} - -/* Receive and acknowledge a packet, returning the data in BUFF (which - should be DATA_MAXLEN + 1 bytes). The protocol documentation - implies that only the sender retransmits packets, so this code just - waits silently for a packet. It returns the length of the received - packet. If THROW_ERROR is nonzero, call error() on errors. If not, - don't print an error message and return -1. */ - -static int -mips_receive_packet (char *buff, int throw_error, int timeout) -{ - int ch; - int garbage; - int len; - unsigned char ack[HDR_LENGTH + TRLR_LENGTH + 1]; - int cksum; - - ch = 0; - garbage = 0; - while (1) - { - unsigned char hdr[HDR_LENGTH]; - unsigned char trlr[TRLR_LENGTH]; - int i; - int err; - - if (mips_receive_header (hdr, &garbage, ch, timeout) != 0) - { - if (throw_error) - mips_error (_("Timed out waiting for remote packet")); - else - return -1; - } - - ch = 0; - - /* An acknowledgement is probably a duplicate; ignore it. */ - if (!HDR_IS_DATA (hdr)) - { - len = HDR_GET_LEN (hdr); - /* Check if the length is valid for an ACK, we may aswell - try and read the remainder of the packet: */ - if (len == 0) - { - /* Ignore the error condition, since we are going to - ignore the packet anyway. */ - (void) mips_receive_trailer (trlr, &garbage, &ch, timeout); - } - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - if (remote_debug > 0) - fprintf_unfiltered (gdb_stdlog, "Ignoring unexpected ACK\n"); - continue; - } - - len = HDR_GET_LEN (hdr); - for (i = 0; i < len; i++) - { - int rch; - - rch = mips_readchar (timeout); - if (rch == SYN) - { - ch = SYN; - break; - } - if (rch == SERIAL_TIMEOUT) - { - if (throw_error) - mips_error (_("Timed out waiting for remote packet")); - else - return -1; - } - buff[i] = rch; - } - - if (i < len) - { - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - if (remote_debug > 0) - fprintf_unfiltered (gdb_stdlog, - "Got new SYN after %d chars (wanted %d)\n", - i, len); - continue; - } - - err = mips_receive_trailer (trlr, &garbage, &ch, timeout); - if (err == -1) - { - if (throw_error) - mips_error (_("Timed out waiting for packet")); - else - return -1; - } - if (err == -2) - { - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - if (remote_debug > 0) - fprintf_unfiltered (gdb_stdlog, "Got SYN when wanted trailer\n"); - continue; - } - - /* If this is the wrong sequence number, ignore it. */ - if (HDR_GET_SEQ (hdr) != mips_receive_seq) - { - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - if (remote_debug > 0) - fprintf_unfiltered (gdb_stdlog, - "Ignoring sequence number %d (want %d)\n", - HDR_GET_SEQ (hdr), mips_receive_seq); - continue; - } - - if (mips_cksum (hdr, buff, len) == TRLR_GET_CKSUM (trlr)) - break; - - if (remote_debug > 0) - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - printf_unfiltered ("Bad checksum; data %d, trailer %d\n", - mips_cksum (hdr, buff, len), - TRLR_GET_CKSUM (trlr)); - - /* The checksum failed. Send an acknowledgement for the - previous packet to tell the remote to resend the packet. */ - ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq); - ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq); - ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq); - ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq); - - cksum = mips_cksum (ack, NULL, 0); - - ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); - ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); - ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); - - if (remote_debug > 0) - { - ack[HDR_LENGTH + TRLR_LENGTH] = '\0'; - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq, - ack + 1); - } - - if (serial_write (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0) - { - if (throw_error) - mips_error (_("write to target failed: %s"), - safe_strerror (errno)); - else - return -1; - } - } - - if (remote_debug > 0) - { - buff[len] = '\0'; - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - printf_unfiltered ("Got packet \"%s\"\n", buff); - } - - /* We got the packet. Send an acknowledgement. */ - mips_receive_seq = (mips_receive_seq + 1) % SEQ_MODULOS; - - ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq); - ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq); - ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq); - ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq); - - cksum = mips_cksum (ack, NULL, 0); - - ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); - ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); - ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); - - if (remote_debug > 0) - { - ack[HDR_LENGTH + TRLR_LENGTH] = '\0'; - /* Don't use _filtered; we can't deal with a QUIT out of - target_wait, and I think this might be called from there. */ - printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq, - ack + 1); - } - - if (serial_write (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0) - { - if (throw_error) - mips_error (_("write to target failed: %s"), safe_strerror (errno)); - else - return -1; - } - - return len; -} - -/* Optionally send a request to the remote system and optionally wait - for the reply. This implements the remote debugging protocol, - which is built on top of the packet protocol defined above. Each - request has an ADDR argument and a DATA argument. The following - requests are defined: - - \0 don't send a request; just wait for a reply - i read word from instruction space at ADDR - d read word from data space at ADDR - I write DATA to instruction space at ADDR - D write DATA to data space at ADDR - r read register number ADDR - R set register number ADDR to value DATA - c continue execution (if ADDR != 1, set pc to ADDR) - s single step (if ADDR != 1, set pc to ADDR) - - The read requests return the value requested. The write requests - return the previous value in the changed location. The execution - requests return a UNIX wait value (the approximate signal which - caused execution to stop is in the upper eight bits). - - If PERR is not NULL, this function waits for a reply. If an error - occurs, it sets *PERR to 1 and sets errno according to what the - target board reports. */ - -static ULONGEST -mips_request (int cmd, - ULONGEST addr, - ULONGEST data, - int *perr, - int timeout, - char *buff) -{ - int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8; - char myBuff[DATA_MAXLEN + 1]; - char response_string[17]; - int len; - int rpid; - char rcmd; - int rerrflg; - ULONGEST rresponse; - - if (buff == (char *) NULL) - buff = myBuff; - - if (cmd != '\0') - { - if (mips_need_reply) - internal_error (__FILE__, __LINE__, - _("mips_request: Trying to send " - "command before reply")); - /* 'T' sets a register to a 64-bit value, so make sure we use - the right conversion function. */ - if (cmd == 'T') - sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, - phex_nz (addr, addr_size), phex_nz (data, 8)); - else - sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, - phex_nz (addr, addr_size), phex_nz (data, addr_size)); - - mips_send_packet (buff, 1); - mips_need_reply = 1; - } - - if (perr == (int *) NULL) - return 0; - - if (!mips_need_reply) - internal_error (__FILE__, __LINE__, - _("mips_request: Trying to get reply before command")); - - mips_need_reply = 0; - - len = mips_receive_packet (buff, 1, timeout); - buff[len] = '\0'; - - if (sscanf (buff, "0x%x %c 0x%x 0x%16s", - &rpid, &rcmd, &rerrflg, response_string) != 4 - || !read_hex_value (response_string, &rresponse) - || (cmd != '\0' && rcmd != cmd)) - mips_error (_("Bad response from remote board")); - - if (rerrflg != 0) - { - *perr = 1; - - /* FIXME: This will returns MIPS errno numbers, which may or may - not be the same as errno values used on other systems. If - they stick to common errno values, they will be the same, but - if they don't, they must be translated. */ - errno = rresponse; - - return 0; - } - - *perr = 0; - return rresponse; -} - -/* Cleanup associated with mips_initialize(). */ - -static void -mips_initialize_cleanups (void *arg) -{ - mips_initializing = 0; -} - -/* Cleanup associated with mips_exit_debug(). */ - -static void -mips_exit_cleanups (void *arg) -{ - mips_exiting = 0; -} - -/* Send a command and wait for that command to be echoed back. Wait, - too, for the following prompt. */ - -static void -mips_send_command (const char *cmd, int prompt) -{ - serial_write (mips_desc, cmd, strlen (cmd)); - mips_expect (cmd); - mips_expect ("\n"); - if (prompt) - mips_expect (mips_monitor_prompt); -} - -/* Enter remote (dbx) debug mode: */ - -static void -mips_enter_debug (void) -{ - /* Reset the sequence numbers, ready for the new debug sequence: */ - mips_send_seq = 0; - mips_receive_seq = 0; - - if (mips_monitor != MON_IDT) - mips_send_command ("debug\r", 0); - else /* Assume IDT monitor by default. */ - mips_send_command ("db tty0\r", 0); - - gdb_usleep (1000000); - serial_write (mips_desc, "\r", sizeof "\r" - 1); - - /* We don't need to absorb any spurious characters here, since the - mips_receive_header will eat up a reasonable number of characters - whilst looking for the SYN, however this avoids the "garbage" - being displayed to the user. */ - if (mips_monitor != MON_IDT) - mips_expect ("\r"); - - { - char buff[DATA_MAXLEN + 1]; - - if (mips_receive_packet (buff, 1, 3) < 0) - mips_error (_("Failed to initialize (didn't receive packet).")); - } -} - -/* Exit remote (dbx) debug mode, returning to the monitor prompt: */ - -static int -mips_exit_debug (void) -{ - int err; - struct cleanup *old_cleanups = make_cleanup (mips_exit_cleanups, NULL); - - mips_exiting = 1; - - if (mips_monitor != MON_IDT && mips_monitor != MON_ROCKHOPPER) - { - /* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately, - so we do not get a reply to this command: */ - mips_request ('x', 0, 0, NULL, mips_receive_wait, NULL); - mips_need_reply = 0; - if (!mips_expect (" break!")) - { - do_cleanups (old_cleanups); - return -1; - } - } - else - mips_request ('x', 0, 0, &err, mips_receive_wait, NULL); - - if (!mips_expect (mips_monitor_prompt)) - { - do_cleanups (old_cleanups); - return -1; - } - - do_cleanups (old_cleanups); - - return 0; -} - -/* Initialize a new connection to the MIPS board, and make sure we are - really connected. */ - -static void -mips_initialize (void) -{ - int err; - struct cleanup *old_cleanups; - int j; - - /* What is this code doing here? I don't see any way it can happen, and - it might mean mips_initializing didn't get cleared properly. - So I'll make it a warning. */ - - if (mips_initializing) - { - warning (_("internal error: mips_initialize called twice")); - return; - } - - old_cleanups = make_cleanup (mips_initialize_cleanups, NULL); - - mips_wait_flag = 0; - mips_initializing = 1; - - /* At this point, the packit protocol isn't responding. We'll try getting - into the monitor, and restarting the protocol. */ - - /* Force the system into the monitor. After this we *should* be at - the mips_monitor_prompt. */ - if (mips_monitor != MON_IDT) - j = 0; /* Start by checking if we are already - at the prompt. */ - else - j = 1; /* Start by sending a break. */ - for (; j <= 4; j++) - { - switch (j) - { - case 0: /* First, try sending a CR. */ - serial_flush_input (mips_desc); - serial_write (mips_desc, "\r", 1); - break; - case 1: /* First, try sending a break. */ - serial_send_break (mips_desc); - break; - case 2: /* Then, try a ^C. */ - serial_write (mips_desc, "\003", 1); - break; - case 3: /* Then, try escaping from download. */ - { - if (mips_monitor != MON_IDT) - { - char tbuff[7]; - - /* We shouldn't need to send multiple termination - sequences, since the target performs line (or - block) reads, and then processes those - packets. In-case we were downloading a large packet - we flush the output buffer before inserting a - termination sequence. */ - serial_flush_output (mips_desc); - sprintf (tbuff, "\r/E/E\r"); - serial_write (mips_desc, tbuff, 6); - } - else - { - char srec[10]; - int i; - - /* We are possibly in binary download mode, having - aborted in the middle of an S-record. ^C won't - work because of binary mode. The only reliable way - out is to send enough termination packets (8 bytes) - to fill up and then overflow the largest size - S-record (255 bytes in this case). This amounts to - 256/8 + 1 packets. */ - - mips_make_srec (srec, '7', 0, NULL, 0); - - for (i = 1; i <= 33; i++) - { - serial_write (mips_desc, srec, 8); - - if (serial_readchar (mips_desc, 0) >= 0) - break; /* Break immediatly if we get something from - the board. */ - } - } - } - break; - case 4: - mips_error (_("Failed to initialize.")); - } - - if (mips_expect (mips_monitor_prompt)) - break; - } - - if (mips_monitor != MON_IDT) - { - /* Sometimes PMON ignores the first few characters in the first - command sent after a load. Sending a blank command gets - around that. */ - mips_send_command ("\r", -1); - - /* Ensure the correct target state: */ - if (mips_monitor != MON_LSI) - mips_send_command ("set regsize 64\r", -1); - mips_send_command ("set hostport tty0\r", -1); - mips_send_command ("set brkcmd \"\"\r", -1); - /* Delete all the current breakpoints: */ - mips_send_command ("db *\r", -1); - /* NOTE: PMON does not have breakpoint support through the - "debug" mode, only at the monitor command-line. */ - } - - mips_enter_debug (); - - /* Clear all breakpoints: */ - if ((mips_monitor == MON_IDT - && mips_clear_breakpoint (-1, 0, BREAK_UNUSED) == 0) - || mips_monitor == MON_LSI) - monitor_supports_breakpoints = 1; - else - monitor_supports_breakpoints = 0; - - do_cleanups (old_cleanups); - - /* If this doesn't call error, we have connected; we don't care if - the request itself succeeds or fails. */ - - mips_request ('r', 0, 0, &err, mips_receive_wait, NULL); -} - -/* Open a connection to the remote board. */ - -static void -common_open (struct target_ops *ops, const char *name, int from_tty, - enum mips_monitor_type new_monitor, - const char *new_monitor_prompt) -{ - char *serial_port_name; - char *remote_name = 0; - char *local_name = 0; - char **argv; - struct cleanup *cleanup; - - if (name == 0) - error (_("\ -To open a MIPS remote debugging connection, you need to specify what\n\ -serial device is attached to the target board (e.g., /dev/ttya).\n\ -If you want to use TFTP to download to the board, specify the name of a\n\ -temporary file to be used by GDB for downloads as the second argument.\n\ -This filename must be in the form host:filename, where host is the name\n\ -of the host running the TFTP server, and the file must be readable by the\n\ -world. If the local name of the temporary file differs from the name as\n\ -seen from the board via TFTP, specify that name as the third parameter.\n")); - - /* Parse the serial port name, the optional TFTP name, and the - optional local TFTP name. */ - argv = gdb_buildargv (name); - cleanup = make_cleanup_freeargv (argv); - - serial_port_name = xstrdup (argv[0]); - if (argv[1]) /* Remote TFTP name specified? */ - { - remote_name = argv[1]; - if (argv[2]) /* Local TFTP filename specified? */ - local_name = argv[2]; - } - - target_preopen (from_tty); - - if (mips_is_open) - unpush_target (current_ops); - - /* Open and initialize the serial port. */ - mips_desc = serial_open (serial_port_name); - if (mips_desc == NULL) - perror_with_name (serial_port_name); - - if (baud_rate != -1) - { - if (serial_setbaudrate (mips_desc, baud_rate)) - { - serial_close (mips_desc); - perror_with_name (serial_port_name); - } - } - - serial_raw (mips_desc); - - /* Open and initialize the optional download port. If it is in the form - hostname#portnumber, it's a UDP socket. If it is in the form - hostname:filename, assume it's the TFTP filename that must be - passed to the DDB board to tell it where to get the load file. */ - if (remote_name) - { - if (strchr (remote_name, '#')) - { - udp_desc = serial_open (remote_name); - if (!udp_desc) - perror_with_name (_("Unable to open UDP port")); - udp_in_use = 1; - } - else - { - /* Save the remote and local names of the TFTP temp file. If - the user didn't specify a local name, assume it's the same - as the part of the remote name after the "host:". */ - if (tftp_name) - xfree (tftp_name); - if (tftp_localname) - xfree (tftp_localname); - if (local_name == NULL) - if ((local_name = strchr (remote_name, ':')) != NULL) - local_name++; /* Skip over the colon. */ - if (local_name == NULL) - local_name = remote_name; /* Local name same as remote name. */ - tftp_name = xstrdup (remote_name); - tftp_localname = xstrdup (local_name); - tftp_in_use = 1; - } - } - - current_ops = ops; - mips_is_open = 1; - - /* Reset the expected monitor prompt if it's never been set before. */ - if (mips_monitor_prompt == NULL) - mips_monitor_prompt = xstrdup (new_monitor_prompt); - mips_monitor = new_monitor; - - mips_initialize (); - - if (from_tty) - printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name); - - /* Switch to using remote target now. */ - push_target (ops); - - inferior_ptid = remote_mips_ptid; - inferior_appeared (current_inferior (), ptid_get_pid (inferior_ptid)); - add_thread_silent (inferior_ptid); - - /* Try to figure out the processor model if possible. */ - deprecated_mips_set_processor_regs_hack (); - - /* This is really the job of start_remote however, that makes an - assumption that the target is about to print out a status message - of some sort. That doesn't happen here (in fact, it may not be - possible to get the monitor to send the appropriate packet). */ - - reinit_frame_cache (); - registers_changed (); - stop_pc = regcache_read_pc (get_current_regcache ()); - print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC, 1); - xfree (serial_port_name); - - do_cleanups (cleanup); -} - -/* Open a connection to an IDT board. */ - -static void -mips_open (const char *name, int from_tty) -{ - const char *monitor_prompt = NULL; - if (gdbarch_bfd_arch_info (target_gdbarch ()) != NULL - && gdbarch_bfd_arch_info (target_gdbarch ())->arch == bfd_arch_mips) - { - switch (gdbarch_bfd_arch_info (target_gdbarch ())->mach) - { - case bfd_mach_mips4100: - case bfd_mach_mips4300: - case bfd_mach_mips4600: - case bfd_mach_mips4650: - case bfd_mach_mips5000: - monitor_prompt = "<RISQ> "; - break; - } - } - if (monitor_prompt == NULL) - monitor_prompt = "<IDT>"; - common_open (&mips_ops, name, from_tty, MON_IDT, monitor_prompt); -} - -/* Open a connection to a PMON board. */ - -static void -pmon_open (const char *name, int from_tty) -{ - common_open (&pmon_ops, name, from_tty, MON_PMON, "PMON> "); -} - -/* Open a connection to a DDB board. */ - -static void -ddb_open (const char *name, int from_tty) -{ - common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>"); -} - -/* Open a connection to a rockhopper board. */ - -static void -rockhopper_open (const char *name, int from_tty) -{ - common_open (&rockhopper_ops, name, from_tty, MON_ROCKHOPPER, "NEC01>"); -} - -/* Open a connection to an LSI board. */ - -static void -lsi_open (const char *name, int from_tty) -{ - int i; - - /* Clear the LSI breakpoint table. */ - for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) - lsi_breakpoints[i].type = BREAK_UNUSED; - - common_open (&lsi_ops, name, from_tty, MON_LSI, "PMON> "); -} - -/* Close a connection to the remote board. */ - -static void -mips_close (struct target_ops *self) -{ - if (mips_is_open) - { - /* Get the board out of remote debugging mode. */ - (void) mips_exit_debug (); - - close_ports (); - } - - generic_mourn_inferior (); -} - -/* Detach from the remote board. */ - -static void -mips_detach (struct target_ops *ops, const char *args, int from_tty) -{ - if (args) - error (_("Argument given to \"detach\" when remotely debugging.")); - - unpush_target (ops); - - if (from_tty) - printf_unfiltered ("Ending remote MIPS debugging.\n"); -} - -/* Tell the target board to resume. This does not wait for a reply - from the board, except in the case of single-stepping on LSI boards, - where PMON does return a reply. */ - -static void -mips_resume (struct target_ops *ops, - ptid_t ptid, int step, enum gdb_signal siggnal) -{ - int err; - - /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after - a single step, so we wait for that. */ - mips_request (step ? 's' : 'c', 1, siggnal, - mips_monitor == MON_LSI && step ? &err : (int *) NULL, - mips_receive_wait, NULL); -} - -/* Return the signal corresponding to SIG, where SIG is the number which - the MIPS protocol uses for the signal. */ - -static enum gdb_signal -mips_signal_from_protocol (int sig) -{ - /* We allow a few more signals than the IDT board actually returns, on - the theory that there is at least *some* hope that perhaps the numbering - for these signals is widely agreed upon. */ - if (sig <= 0 - || sig > 31) - return GDB_SIGNAL_UNKNOWN; - - /* Don't want to use gdb_signal_from_host because we are converting - from MIPS signal numbers, not host ones. Our internal numbers - match the MIPS numbers for the signals the board can return, which - are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP. */ - return (enum gdb_signal) sig; -} - -/* Set the register designated by REGNO to the value designated by VALUE. */ - -static void -mips_set_register (int regno, ULONGEST value) -{ - gdb_byte buf[MAX_REGISTER_SIZE]; - struct regcache *regcache = get_current_regcache (); - struct gdbarch *gdbarch = get_regcache_arch (regcache); - enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - - /* We got the number the register holds, but gdb expects to see a - value in the target byte ordering. */ - - if (mips_monitor != MON_ROCKHOPPER - && (regno == mips_regnum (gdbarch)->pc || regno < 32)) - /* Some 64-bit boards have monitors that only send the bottom 32 bits. - In such cases we can only really debug 32-bit code properly so, - when reading a GPR or the PC, assume that the full 64-bit - value is the sign extension of the lower 32 bits. */ - store_signed_integer (buf, register_size (gdbarch, regno), byte_order, - value); - else - store_unsigned_integer (buf, register_size (gdbarch, regno), byte_order, - value); - - regcache_raw_supply (regcache, regno, buf); -} - -/* Wait until the remote stops, and return a wait status. */ - -static ptid_t -mips_wait (struct target_ops *ops, - ptid_t ptid, struct target_waitstatus *status, int options) -{ - int rstatus; - int err; - char buff[DATA_MAXLEN]; - ULONGEST rpc, rfp, rsp; - char pc_string[17], fp_string[17], sp_string[17], flags[20]; - int nfields; - - interrupt_count = 0; - hit_watchpoint = 0; - - /* If we have not sent a single step or continue command, then the - board is waiting for us to do something. Return a status - indicating that it is stopped. */ - if (!mips_need_reply) - { - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = GDB_SIGNAL_TRAP; - return inferior_ptid; - } - - /* No timeout; we sit here as long as the program continues to execute. */ - mips_wait_flag = 1; - rstatus = mips_request ('\000', 0, 0, &err, -1, buff); - mips_wait_flag = 0; - if (err) - mips_error (_("Remote failure: %s"), safe_strerror (errno)); - - /* On returning from a continue, the PMON monitor seems to start - echoing back the messages we send prior to sending back the - ACK. The code can cope with this, but to try and avoid the - unnecessary serial traffic, and "spurious" characters displayed - to the user, we cheat and reset the debug protocol. The problems - seems to be caused by a check on the number of arguments, and the - command length, within the monitor causing it to echo the command - as a bad packet. */ - if (mips_monitor == MON_PMON) - { - mips_exit_debug (); - mips_enter_debug (); - } - - /* See if we got back extended status. If so, pick out the pc, fp, - sp, etc... */ - - nfields = sscanf (buff, - "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s", - pc_string, fp_string, sp_string, flags); - if (nfields >= 3 - && read_hex_value (pc_string, &rpc) - && read_hex_value (fp_string, &rfp) - && read_hex_value (sp_string, &rsp)) - { - struct regcache *regcache = get_current_regcache (); - struct gdbarch *gdbarch = get_regcache_arch (regcache); - - mips_set_register (gdbarch_pc_regnum (gdbarch), rpc); - mips_set_register (30, rfp); - mips_set_register (gdbarch_sp_regnum (gdbarch), rsp); - - if (nfields == 9) - { - int i; - - for (i = 0; i <= 2; i++) - if (flags[i] == 'r' || flags[i] == 'w') - hit_watchpoint = 1; - else if (flags[i] == '\000') - break; - } - } - - if (strcmp (target_shortname, "lsi") == 0) - { -#if 0 - /* If this is an LSI PMON target, see if we just hit a - hardrdware watchpoint. Right now, PMON doesn't give us - enough information to determine which breakpoint we hit. So - we have to look up the PC in our own table of breakpoints, - and if found, assume it's just a normal instruction fetch - breakpoint, not a data watchpoint. FIXME when PMON provides - some way to tell us what type of breakpoint it is. */ - int i; - CORE_ADDR pc = regcache_read_pc (get_current_regcache ()); - - hit_watchpoint = 1; - for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) - { - if (lsi_breakpoints[i].addr == pc - && lsi_breakpoints[i].type == BREAK_FETCH) - { - hit_watchpoint = 0; - break; - } - } -#else - /* If a data breakpoint was hit, PMON returns the following packet: - 0x1 c 0x0 0x57f 0x1 - The return packet from an ordinary breakpoint doesn't have the - extra 0x01 field tacked onto the end. */ - if (nfields == 1 && rpc == 1) - hit_watchpoint = 1; -#endif - } - - /* NOTE: The following (sig) numbers are defined by PMON: - SPP_SIGTRAP 5 breakpoint - SPP_SIGINT 2 - SPP_SIGSEGV 11 - SPP_SIGBUS 10 - SPP_SIGILL 4 - SPP_SIGFPE 8 - SPP_SIGTERM 15 */ - - /* Translate a MIPS waitstatus. We use constants here rather than WTERMSIG - and so on, because the constants we want here are determined by the - MIPS protocol and have nothing to do with what host we are running on. */ - if ((rstatus & 0xff) == 0) - { - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = (((rstatus) >> 8) & 0xff); - } - else if ((rstatus & 0xff) == 0x7f) - { - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = mips_signal_from_protocol (((rstatus) >> 8) & 0xff); - - /* If the stop PC is in the _exit function, assume - we hit the 'break 0x3ff' instruction in _exit, so this - is not a normal breakpoint. */ - if (strcmp (target_shortname, "lsi") == 0) - { - const char *func_name; - CORE_ADDR func_start; - CORE_ADDR pc = regcache_read_pc (get_current_regcache ()); - - find_pc_partial_function (pc, &func_name, &func_start, NULL); - if (func_name != NULL && strcmp (func_name, "_exit") == 0 - && func_start == pc) - status->kind = TARGET_WAITKIND_EXITED; - } - } - else - { - status->kind = TARGET_WAITKIND_SIGNALLED; - status->value.sig = mips_signal_from_protocol (rstatus & 0x7f); - } - - return inferior_ptid; -} - -/* We have to map between the register numbers used by gdb and the - register numbers used by the debugging protocol. */ - -#define REGNO_OFFSET 96 - -static int -mips_map_regno (struct gdbarch *gdbarch, int regno) -{ - if (regno < 32) - return regno; - if (regno >= mips_regnum (gdbarch)->fp0 - && regno < mips_regnum (gdbarch)->fp0 + 32) - return regno - mips_regnum (gdbarch)->fp0 + 32; - else if (regno == mips_regnum (gdbarch)->pc) - return REGNO_OFFSET + 0; - else if (regno == mips_regnum (gdbarch)->cause) - return REGNO_OFFSET + 1; - else if (regno == mips_regnum (gdbarch)->hi) - return REGNO_OFFSET + 2; - else if (regno == mips_regnum (gdbarch)->lo) - return REGNO_OFFSET + 3; - else if (regno == mips_regnum (gdbarch)->fp_control_status) - return REGNO_OFFSET + 4; - else if (regno == mips_regnum (gdbarch)->fp_implementation_revision) - return REGNO_OFFSET + 5; - else - /* FIXME: Is there a way to get the status register? */ - return 0; -} - -/* Fetch the remote registers. */ - -static void -mips_fetch_registers (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - struct gdbarch *gdbarch = get_regcache_arch (regcache); - enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - ULONGEST val; - int err; - - if (regno == -1) - { - for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++) - mips_fetch_registers (ops, regcache, regno); - return; - } - - if (regno == gdbarch_deprecated_fp_regnum (gdbarch) - || regno == MIPS_ZERO_REGNUM) - /* gdbarch_deprecated_fp_regnum on the mips is a hack which is just - supposed to read zero (see also mips-nat.c). */ - val = 0; - else - { - /* If PMON doesn't support this register, don't waste serial - bandwidth trying to read it. */ - int pmon_reg = mips_map_regno (gdbarch, regno); - - if (regno != 0 && pmon_reg == 0) - val = 0; - else - { - /* Unfortunately the PMON version in the Vr4300 board has been - compiled without the 64bit register access commands. This - means we cannot get hold of the full register width. */ - if (mips_monitor == MON_DDB || mips_monitor == MON_ROCKHOPPER) - val = mips_request ('t', pmon_reg, 0, - &err, mips_receive_wait, NULL); - else - val = mips_request ('r', pmon_reg, 0, - &err, mips_receive_wait, NULL); - if (err) - mips_error (_("Can't read register %d: %s"), regno, - safe_strerror (errno)); - } - } - - mips_set_register (regno, val); -} - -/* Prepare to store registers. The MIPS protocol can store individual - registers, so this function doesn't have to do anything. */ - -static void -mips_prepare_to_store (struct target_ops *self, struct regcache *regcache) -{ -} - -/* Store remote register(s). */ - -static void -mips_store_registers (struct target_ops *ops, - struct regcache *regcache, int regno) -{ - struct gdbarch *gdbarch = get_regcache_arch (regcache); - ULONGEST val; - int err; - - if (regno == -1) - { - for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++) - mips_store_registers (ops, regcache, regno); - return; - } - - regcache_cooked_read_unsigned (regcache, regno, &val); - mips_request (mips_monitor == MON_ROCKHOPPER ? 'T' : 'R', - mips_map_regno (gdbarch, regno), - val, - &err, mips_receive_wait, NULL); - if (err) - mips_error (_("Can't write register %d: %s"), regno, - safe_strerror (errno)); -} - -/* Fetch a word from the target board. Return word fetched in location - addressed by VALP. Return 0 when successful; return positive error - code when not. */ - -static int -mips_fetch_word (CORE_ADDR addr, unsigned int *valp) -{ - int err; - - *valp = mips_request ('d', addr, 0, &err, mips_receive_wait, NULL); - if (err) - { - /* Data space failed; try instruction space. */ - *valp = mips_request ('i', addr, 0, &err, - mips_receive_wait, NULL); - } - return err; -} - -/* Store a word to the target board. Returns errno code or zero for - success. If OLD_CONTENTS is non-NULL, put the old contents of that - memory location there. */ - -/* FIXME! make sure only 32-bit quantities get stored! */ -static int -mips_store_word (CORE_ADDR addr, unsigned int val, int *old_contents) -{ - int err; - unsigned int oldcontents; - - oldcontents = mips_request ('D', addr, val, &err, - mips_receive_wait, NULL); - if (err) - { - /* Data space failed; try instruction space. */ - oldcontents = mips_request ('I', addr, val, &err, - mips_receive_wait, NULL); - if (err) - return errno; - } - if (old_contents != NULL) - *old_contents = oldcontents; - return 0; -} - -/* Helper for mips_xfer_partial that handles memory transfers. - Arguments are like target_xfer_partial. Note that the protocol - gives us the correct value for a longword, since it transfers - values in ASCII. We want the byte values, so we have to swap the - longword values. */ - -static int mask_address_p = 1; - -static enum target_xfer_status -mips_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf, - ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len) -{ - enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ()); - int i; - CORE_ADDR addr; - int count; - gdb_byte *buffer; - int status; - - /* PMON targets do not cope well with 64 bit addresses. Mask the - value down to 32 bits. */ - if (mask_address_p) - memaddr &= (CORE_ADDR) 0xffffffff; - - /* Round starting address down to longword boundary. */ - addr = memaddr & ~3; - /* Round ending address up; get number of longwords that makes. */ - count = (((memaddr + len) - addr) + 3) / 4; - /* Allocate buffer of that many longwords. */ - buffer = (gdb_byte *) alloca (count * 4); - - if (writebuf != NULL) - { - /* Fill start and end extra bytes of buffer with existing data. */ - if (addr != memaddr || len < 4) - { - unsigned int val; - - if (mips_fetch_word (addr, &val)) - return TARGET_XFER_E_IO; - - /* Need part of initial word -- fetch it. */ - store_unsigned_integer (&buffer[0], 4, byte_order, val); - } - - if (count > 1) - { - unsigned int val; - - /* Need part of last word -- fetch it. FIXME: we do this even - if we don't need it. */ - if (mips_fetch_word (addr + (count - 1) * 4, &val)) - return TARGET_XFER_E_IO; - - store_unsigned_integer (&buffer[(count - 1) * 4], - 4, byte_order, val); - } - - /* Copy data to be written over corresponding part of buffer. */ - - memcpy ((char *) buffer + (memaddr & 3), writebuf, len); - - /* Write the entire buffer. */ - - for (i = 0; i < count; i++, addr += 4) - { - int word; - - word = extract_unsigned_integer (&buffer[i * 4], 4, byte_order); - status = mips_store_word (addr, word, NULL); - /* Report each kilobyte (we download 32-bit words at a time). */ - if (i % 256 == 255) - { - printf_unfiltered ("*"); - gdb_flush (gdb_stdout); - } - if (status) - return TARGET_XFER_E_IO; - /* FIXME: Do we want a QUIT here? */ - } - if (count >= 256) - printf_unfiltered ("\n"); - } - else - { - /* Read all the longwords. */ - for (i = 0; i < count; i++, addr += 4) - { - unsigned int val; - - if (mips_fetch_word (addr, &val)) - return TARGET_XFER_E_IO; - - store_unsigned_integer (&buffer[i * 4], 4, byte_order, val); - QUIT; - } - - /* Copy appropriate bytes out of the buffer. */ - memcpy (readbuf, buffer + (memaddr & 3), len); - } - *xfered_len = len; - return TARGET_XFER_OK; -} - -/* Target to_xfer_partial implementation. */ - -static enum target_xfer_status -mips_xfer_partial (struct target_ops *ops, enum target_object object, - const char *annex, gdb_byte *readbuf, - const gdb_byte *writebuf, ULONGEST offset, ULONGEST len, - ULONGEST *xfered_len) -{ - switch (object) - { - case TARGET_OBJECT_MEMORY: - return mips_xfer_memory (readbuf, writebuf, offset, len, xfered_len); - - default: - return ops->beneath->to_xfer_partial (ops->beneath, object, annex, - readbuf, writebuf, offset, len, - xfered_len); - } -} - -/* Print info on this target. */ - -static void -mips_files_info (struct target_ops *ignore) -{ - printf_unfiltered ("Debugging a MIPS board over a serial line.\n"); -} - -/* Kill the process running on the board. This will actually only - work if we are doing remote debugging over the console input. I - think that if IDT/sim had the remote debug interrupt enabled on the - right port, we could interrupt the process with a break signal. */ - -static void -mips_kill (struct target_ops *ops) -{ - if (!mips_wait_flag) - { - target_mourn_inferior (); - return; - } - - interrupt_count++; - - if (interrupt_count >= 2) - { - interrupt_count = 0; - - target_terminal_ours (); - - if (query (_("Interrupted while waiting for the program.\n\ -Give up (and stop debugging it)? "))) - { - /* Clean up in such a way that mips_close won't try to talk - to the board (it almost surely won't work since we - weren't able to talk to it). */ - mips_wait_flag = 0; - close_ports (); - - printf_unfiltered ("Ending remote MIPS debugging.\n"); - target_mourn_inferior (); - quit (); - } - - target_terminal_inferior (); - } - - if (remote_debug > 0) - printf_unfiltered ("Sending break\n"); - - serial_send_break (mips_desc); - - target_mourn_inferior (); - -#if 0 - if (mips_is_open) - { - char cc; - - /* Send a ^C. */ - cc = '\003'; - serial_write (mips_desc, &cc, 1); - sleep (1); - target_mourn_inferior (); - } -#endif -} - -/* Start running on the target board. */ - -static void -mips_create_inferior (struct target_ops *ops, char *execfile, - char *args, char **env, int from_tty) -{ - CORE_ADDR entry_pt; - - if (args && *args) - { - warning (_("\ -Can't pass arguments to remote MIPS board; arguments ignored.")); - /* And don't try to use them on the next "run" command. */ - execute_command ("set args", 0); - } - - if (execfile == 0 || exec_bfd == 0) - error (_("No executable file specified")); - - entry_pt = (CORE_ADDR) bfd_get_start_address (exec_bfd); - - init_wait_for_inferior (); - - regcache_write_pc (get_current_regcache (), entry_pt); -} - -/* Clean up after a process. The bulk of the work is done in mips_close(), - which is called when unpushing the target. */ - -static void -mips_mourn_inferior (struct target_ops *ops) -{ - if (current_ops != NULL) - unpush_target (current_ops); -} - -/* We can write a breakpoint and read the shadow contents in one - operation. */ - -/* Insert a breakpoint. On targets that don't have built-in - breakpoint support, we read the contents of the target location and - stash it, then overwrite it with a breakpoint instruction. ADDR is - the target location in the target machine. BPT is the breakpoint - being inserted or removed, which contains memory for saving the - target contents. */ - -static int -mips_insert_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - if (monitor_supports_breakpoints) - { - bp_tgt->placed_address = bp_tgt->reqstd_address; - return mips_set_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE, - BREAK_FETCH); - } - else - return memory_insert_breakpoint (ops, gdbarch, bp_tgt); -} - -/* Remove a breakpoint. */ - -static int -mips_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -{ - if (monitor_supports_breakpoints) - return mips_clear_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE, - BREAK_FETCH); - else - return memory_remove_breakpoint (ops, gdbarch, bp_tgt); -} - -/* Tell whether this target can support a hardware breakpoint. CNT - is the number of hardware breakpoints already installed. This - implements the target_can_use_hardware_watchpoint macro. */ - -static int -mips_can_use_watchpoint (struct target_ops *self, - enum bptype type, int cnt, int othertype) -{ - return cnt < MAX_LSI_BREAKPOINTS && strcmp (target_shortname, "lsi") == 0; -} - - -/* Compute a don't care mask for the region bounding ADDR and ADDR + LEN - 1. - This is used for memory ref breakpoints. */ - -static unsigned long -calculate_mask (CORE_ADDR addr, int len) -{ - unsigned long mask; - int i; - - mask = addr ^ (addr + len - 1); - - for (i = 32; i >= 0; i--) - if (mask == 0) - break; - else - mask >>= 1; - - mask = (unsigned long) 0xffffffff >> i; - - return mask; -} - - -/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0 - for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write - watchpoint. */ - -static int -mips_insert_watchpoint (struct target_ops *self, - CORE_ADDR addr, int len, enum target_hw_bp_type type, - struct expression *cond) -{ - /* These enum types are compatible by design. */ - enum break_type btype = (enum break_type) type; - - if (mips_set_breakpoint (addr, len, btype)) - return -1; - - return 0; -} - -/* Remove a watchpoint. */ - -static int -mips_remove_watchpoint (struct target_ops *self, - CORE_ADDR addr, int len, enum target_hw_bp_type type, - struct expression *cond) -{ - /* These enum types are compatible by design. */ - enum break_type btype = (enum break_type) type; - - if (mips_clear_breakpoint (addr, len, btype)) - return -1; - - return 0; -} - -/* Test to see if a watchpoint has been hit. Return 1 if so; return 0, - if not. */ - -static int -mips_stopped_by_watchpoint (struct target_ops *ops) -{ - return hit_watchpoint; -} - - -/* Insert a breakpoint. */ - -static int -mips_set_breakpoint (CORE_ADDR addr, int len, enum break_type type) -{ - return mips_common_breakpoint (1, addr, len, type); -} - - -/* Clear a breakpoint. */ - -static int -mips_clear_breakpoint (CORE_ADDR addr, int len, enum break_type type) -{ - return mips_common_breakpoint (0, addr, len, type); -} - - -/* Check the error code from the return packet for an LSI breakpoint - command. If there's no error, just return 0. If it's a warning, - print the warning text and return 0. If it's an error, print - the error text and return 1. <ADDR> is the address of the breakpoint - that was being set. <RERRFLG> is the error code returned by PMON. - This is a helper function for mips_common_breakpoint. */ - -static int -mips_check_lsi_error (CORE_ADDR addr, int rerrflg) -{ - struct lsi_error *err; - const char *saddr = paddress (target_gdbarch (), addr); - - if (rerrflg == 0) /* no error */ - return 0; - - /* Warnings can be ORed together, so check them all. */ - if (rerrflg & W_WARN) - { - if (monitor_warnings) - { - int found = 0; - - for (err = lsi_warning_table; err->code != 0; err++) - { - if ((err->code & rerrflg) == err->code) - { - found = 1; - fprintf_unfiltered (gdb_stderr, "\ -mips_common_breakpoint (%s): Warning: %s\n", - saddr, - err->string); - } - } - if (!found) - fprintf_unfiltered (gdb_stderr, "\ -mips_common_breakpoint (%s): Unknown warning: 0x%x\n", - saddr, - rerrflg); - } - return 0; - } - - /* Errors are unique, i.e. can't be ORed together. */ - for (err = lsi_error_table; err->code != 0; err++) - { - if ((err->code & rerrflg) == err->code) - { - fprintf_unfiltered (gdb_stderr, "\ -mips_common_breakpoint (%s): Error: %s\n", - saddr, - err->string); - return 1; - } - } - fprintf_unfiltered (gdb_stderr, "\ -mips_common_breakpoint (%s): Unknown error: 0x%x\n", - saddr, - rerrflg); - return 1; -} - - -/* This routine sends a breakpoint command to the remote target. - - <SET> is 1 if setting a breakpoint, or 0 if clearing a breakpoint. - <ADDR> is the address of the breakpoint. - <LEN> the length of the region to break on. - <TYPE> is the type of breakpoint: - 0 = write (BREAK_WRITE) - 1 = read (BREAK_READ) - 2 = read/write (BREAK_ACCESS) - 3 = instruction fetch (BREAK_FETCH) - - Return 0 if successful; otherwise 1. */ - -static int -mips_common_breakpoint (int set, CORE_ADDR addr, int len, enum break_type type) -{ - int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8; - char buf[DATA_MAXLEN + 1]; - char cmd, rcmd; - int rpid, rerrflg, rresponse, rlen; - int nfields; - - addr = gdbarch_addr_bits_remove (target_gdbarch (), addr); - - if (mips_monitor == MON_LSI) - { - if (set == 0) /* clear breakpoint */ - { - /* The LSI PMON "clear breakpoint" has this form: - <pid> 'b' <bptn> 0x0 - reply: - <pid> 'b' 0x0 <code> - - <bptn> is a breakpoint number returned by an earlier 'B' command. - Possible return codes: OK, E_BPT. */ - - int i; - - /* Search for the breakpoint in the table. */ - for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) - if (lsi_breakpoints[i].type == type - && lsi_breakpoints[i].addr == addr - && lsi_breakpoints[i].len == len) - break; - - /* Clear the table entry and tell PMON to clear the breakpoint. */ - if (i == MAX_LSI_BREAKPOINTS) - { - warning (_("\ -mips_common_breakpoint: Attempt to clear bogus breakpoint at %s"), - paddress (target_gdbarch (), addr)); - return 1; - } - - lsi_breakpoints[i].type = BREAK_UNUSED; - sprintf (buf, "0x0 b 0x%x 0x0", i); - mips_send_packet (buf, 1); - - rlen = mips_receive_packet (buf, 1, mips_receive_wait); - buf[rlen] = '\0'; - - nfields = sscanf (buf, "0x%x b 0x0 0x%x", &rpid, &rerrflg); - if (nfields != 2) - mips_error (_("mips_common_breakpoint: " - "Bad response from remote board: %s"), - buf); - - return (mips_check_lsi_error (addr, rerrflg)); - } - else - /* set a breakpoint */ - { - /* The LSI PMON "set breakpoint" command has this form: - <pid> 'B' <addr> 0x0 - reply: - <pid> 'B' <bptn> <code> - - The "set data breakpoint" command has this form: - - <pid> 'A' <addr1> <type> [<addr2> [<value>]] - - where: type= "0x1" = read - "0x2" = write - "0x3" = access (read or write) - - The reply returns two values: - bptn - a breakpoint number, which is a small integer with - possible values of zero through 255. - code - an error return code, a value of zero indicates a - succesful completion, other values indicate various - errors and warnings. - - Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON. */ - - if (type == BREAK_FETCH) /* instruction breakpoint */ - { - cmd = 'B'; - sprintf (buf, "0x0 B 0x%s 0x0", phex_nz (addr, addr_size)); - } - else - /* watchpoint */ - { - cmd = 'A'; - sprintf (buf, "0x0 A 0x%s 0x%x 0x%s", - phex_nz (addr, addr_size), - type == BREAK_READ ? 1 : (type == BREAK_WRITE ? 2 : 3), - phex_nz (addr + len - 1, addr_size)); - } - mips_send_packet (buf, 1); - - rlen = mips_receive_packet (buf, 1, mips_receive_wait); - buf[rlen] = '\0'; - - nfields = sscanf (buf, "0x%x %c 0x%x 0x%x", - &rpid, &rcmd, &rresponse, &rerrflg); - if (nfields != 4 || rcmd != cmd || rresponse > 255) - mips_error (_("mips_common_breakpoint: " - "Bad response from remote board: %s"), - buf); - - if (rerrflg != 0) - if (mips_check_lsi_error (addr, rerrflg)) - return 1; - - /* rresponse contains PMON's breakpoint number. Record the - information for this breakpoint so we can clear it later. */ - lsi_breakpoints[rresponse].type = type; - lsi_breakpoints[rresponse].addr = addr; - lsi_breakpoints[rresponse].len = len; - - return 0; - } - } - else - { - /* On non-LSI targets, the breakpoint command has this form: - 0x0 <CMD> <ADDR> <MASK> <FLAGS> - <MASK> is a don't care mask for addresses. - <FLAGS> is any combination of `r', `w', or `f' for - read/write/fetch. */ - - unsigned long mask; - - mask = calculate_mask (addr, len); - addr &= ~mask; - - if (set) /* set a breakpoint */ - { - char *flags; - - switch (type) - { - case BREAK_WRITE: /* write */ - flags = "w"; - break; - case BREAK_READ: /* read */ - flags = "r"; - break; - case BREAK_ACCESS: /* read/write */ - flags = "rw"; - break; - case BREAK_FETCH: /* fetch */ - flags = "f"; - break; - default: - internal_error (__FILE__, __LINE__, - _("failed internal consistency check")); - } - - cmd = 'B'; - sprintf (buf, "0x0 B 0x%s 0x%s %s", phex_nz (addr, addr_size), - phex_nz (mask, addr_size), flags); - } - else - { - cmd = 'b'; - sprintf (buf, "0x0 b 0x%s", phex_nz (addr, addr_size)); - } - - mips_send_packet (buf, 1); - - rlen = mips_receive_packet (buf, 1, mips_receive_wait); - buf[rlen] = '\0'; - - nfields = sscanf (buf, "0x%x %c 0x%x 0x%x", - &rpid, &rcmd, &rerrflg, &rresponse); - - if (nfields != 4 || rcmd != cmd) - mips_error (_("mips_common_breakpoint: " - "Bad response from remote board: %s"), - buf); - - if (rerrflg != 0) - { - /* Ddb returns "0x0 b 0x16 0x0\000", whereas - Cogent returns "0x0 b 0xffffffff 0x16\000": */ - if (mips_monitor == MON_DDB) - rresponse = rerrflg; - if (rresponse != 22) /* invalid argument */ - fprintf_unfiltered (gdb_stderr, "\ -mips_common_breakpoint (%s): Got error: 0x%x\n", - paddress (target_gdbarch (), addr), rresponse); - return 1; - } - } - return 0; -} - -/* Send one S record as specified by SREC of length LEN, starting - at ADDR. Note, however, that ADDR is not used except to provide - a useful message to the user in the event that a NACK is received - from the board. */ - -static void -send_srec (char *srec, int len, CORE_ADDR addr) -{ - while (1) - { - int ch; - - serial_write (mips_desc, srec, len); - - ch = mips_readchar (remote_timeout); - - switch (ch) - { - case SERIAL_TIMEOUT: - error (_("Timeout during download.")); - break; - case 0x6: /* ACK */ - return; - case 0x15: /* NACK */ - fprintf_unfiltered (gdb_stderr, - "Download got a NACK at byte %s! Retrying.\n", - paddress (target_gdbarch (), addr)); - continue; - default: - error (_("Download got unexpected ack char: 0x%x, retrying."), - ch); - } - } -} - -/* Download a binary file by converting it to S records. */ - -static void -mips_load_srec (const char *args) -{ - bfd *abfd; - asection *s; - char srec[1024]; - bfd_byte *buffer; - unsigned int i; - unsigned int srec_frame = 200; - int reclen; - struct cleanup *cleanup; - static int hashmark = 1; - - buffer = (bfd_byte *) alloca (srec_frame * 2 + 256); - - abfd = gdb_bfd_open (args, NULL, -1); - if (!abfd) - { - printf_filtered ("Unable to open file %s\n", args); - return; - } - - cleanup = make_cleanup_bfd_unref (abfd); - if (bfd_check_format (abfd, bfd_object) == 0) - { - printf_filtered ("File is not an object file\n"); - do_cleanups (cleanup); - return; - } - -/* This actually causes a download in the IDT binary format: */ - mips_send_command (LOAD_CMD, 0); - - for (s = abfd->sections; s; s = s->next) - { - if (s->flags & SEC_LOAD) - { - unsigned int numbytes; - - /* FIXME! vma too small????? */ - printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s->name, - (long) s->vma, - (long) (s->vma + bfd_get_section_size (s))); - gdb_flush (gdb_stdout); - - for (i = 0; i < bfd_get_section_size (s); i += numbytes) - { - numbytes = min (srec_frame, bfd_get_section_size (s) - i); - - bfd_get_section_contents (abfd, s, buffer, i, numbytes); - - reclen = mips_make_srec (srec, '3', s->vma + i, - buffer, numbytes); - send_srec (srec, reclen, s->vma + i); - - if (deprecated_ui_load_progress_hook) - deprecated_ui_load_progress_hook (s->name, i); - - if (hashmark) - { - putchar_unfiltered ('#'); - gdb_flush (gdb_stdout); - } - - } /* Per-packet (or S-record) loop */ - - putchar_unfiltered ('\n'); - } /* Loadable sections */ - } - if (hashmark) - putchar_unfiltered ('\n'); - - /* Write a type 7 terminator record. no data for a type 7, and there - is no data, so len is 0. */ - - reclen = mips_make_srec (srec, '7', abfd->start_address, NULL, 0); - - send_srec (srec, reclen, abfd->start_address); - - serial_flush_input (mips_desc); - do_cleanups (cleanup); -} - -/* - * mips_make_srec -- make an srecord. This writes each line, one at a - * time, each with it's own header and trailer line. - * An srecord looks like this: - * - * byte count-+ address - * start ---+ | | data +- checksum - * | | | | - * S01000006F6B692D746573742E73726563E4 - * S315000448600000000000000000FC00005900000000E9 - * S31A0004000023C1400037DE00F023604000377B009020825000348D - * S30B0004485A0000000000004E - * S70500040000F6 - * - * S<type><length><address><data><checksum> - * - * Where - * - length - * is the number of bytes following upto the checksum. Note that - * this is not the number of chars following, since it takes two - * chars to represent a byte. - * - type - * is one of: - * 0) header record - * 1) two byte address data record - * 2) three byte address data record - * 3) four byte address data record - * 7) four byte address termination record - * 8) three byte address termination record - * 9) two byte address termination record - * - * - address - * is the start address of the data following, or in the case of - * a termination record, the start address of the image - * - data - * is the data. - * - checksum - * is the sum of all the raw byte data in the record, from the length - * upwards, modulo 256 and subtracted from 255. - * - * This routine returns the length of the S-record. - * - */ - -static int -mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, - int len) -{ - unsigned char checksum; - int i; - - /* Create the header for the srec. addr_size is the number of bytes - in the address, and 1 is the number of bytes in the count. */ - - /* FIXME!! bigger buf required for 64-bit! */ - buf[0] = 'S'; - buf[1] = type; - buf[2] = len + 4 + 1; /* len + 4 byte address + 1 byte checksum */ - /* This assumes S3 style downloads (4byte addresses). There should - probably be a check, or the code changed to make it more - explicit. */ - buf[3] = memaddr >> 24; - buf[4] = memaddr >> 16; - buf[5] = memaddr >> 8; - buf[6] = memaddr; - memcpy (&buf[7], myaddr, len); - - /* Note that the checksum is calculated on the raw data, not the - hexified data. It includes the length, address and the data - portions of the packet. */ - checksum = 0; - buf += 2; /* Point at length byte. */ - for (i = 0; i < len + 4 + 1; i++) - checksum += *buf++; - - *buf = ~checksum; - - return len + 8; -} - -/* The following manifest controls whether we enable the simple flow - control support provided by the monitor. If enabled the code will - wait for an affirmative ACK between transmitting packets. */ -#define DOETXACK (1) - -/* The PMON fast-download uses an encoded packet format constructed of - 3byte data packets (encoded as 4 printable ASCII characters), and - escape sequences (preceded by a '/'): - - 'K' clear checksum - 'C' compare checksum (12bit value, not included in checksum calculation) - 'S' define symbol name (for addr) terminated with "," - and padded to 4char boundary - 'Z' zero fill multiple of 3bytes - 'B' byte (12bit encoded value, of 8bit data) - 'A' address (36bit encoded value) - 'E' define entry as original address, and exit load - - The packets are processed in 4 character chunks, so the escape - sequences that do not have any data (or variable length data) - should be padded to a 4 character boundary. The decoder will give - an error if the complete message block size is not a multiple of - 4bytes (size of record). - - The encoding of numbers is done in 6bit fields. The 6bit value is - used to index into this string to get the specific character - encoding for the value: */ -static char encoding[] = - "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,."; - -/* Convert the number of bits required into an encoded number, 6bits - at a time (range 0..63). Keep a checksum if required (passed - pointer non-NULL). The function returns the number of encoded - characters written into the buffer. */ - -static int -pmon_makeb64 (unsigned long v, char *p, int n, unsigned int *chksum) -{ - int count = (n / 6); - - if ((n % 12) != 0) - { - fprintf_unfiltered (gdb_stderr, - "Fast encoding bitcount must be a " - "multiple of 12bits: %dbit%s\n", - n, (n == 1) ? "" : "s"); - return (0); - } - if (n > 36) - { - fprintf_unfiltered (gdb_stderr, - "Fast encoding cannot process more " - "than 36bits at the moment: %dbits\n", n); - return (0); - } - - /* Deal with the checksum: */ - if (chksum != NULL) - { - switch (n) - { - case 36: - *chksum += ((v >> 24) & 0xFFF); - case 24: - *chksum += ((v >> 12) & 0xFFF); - case 12: - *chksum += ((v >> 0) & 0xFFF); - } - } - - do - { - n -= 6; - *p++ = encoding[(v >> n) & 0x3F]; - } - while (n > 0); - - return (count); -} - -/* Shorthand function (that could be in-lined) to output the zero-fill - escape sequence into the data stream. */ - -static int -pmon_zeroset (int recsize, char **buff, - unsigned int *amount, unsigned int *chksum) -{ - int count; - - sprintf (*buff, "/Z"); - count = pmon_makeb64 (*amount, (*buff + 2), 12, chksum); - *buff += (count + 2); - *amount = 0; - return (recsize + count + 2); -} - -/* Add the checksum specified by *VALUE to end of the record under - construction. *BUF specifies the location at which to begin - writing characters comprising the checksum information. RECSIZE - specifies the size of the record constructed thus far. (A trailing - NUL character may be present in the buffer holding the record, but - the record size does not include this character.) - - Return the total size of the record after adding the checksum escape, - the checksum itself, and the trailing newline. - - The checksum specified by *VALUE is zeroed out prior to returning. - Additionally, *BUF is updated to refer to the location just beyond - the record elements added by this call. */ - -static int -pmon_checkset (int recsize, char **buff, unsigned int *value) -{ - int count; - - /* Add the checksum (without updating the value): */ - sprintf (*buff, "/C"); - count = pmon_makeb64 (*value, (*buff + 2), 12, NULL); - *buff += (count + 2); - sprintf (*buff, "\n"); - *buff += 2; /* Include zero terminator. */ - /* Forcing a checksum validation clears the sum: */ - *value = 0; - return (recsize + count + 3); -} - -/* Amount of padding we leave after at the end of the output buffer, - for the checksum and line termination characters: */ -#define CHECKSIZE (4 + 4 + 4 + 2) -/* zero-fill, checksum, transfer end and line termination space. */ - -/* The amount of binary data loaded from the object file in a single - operation: */ -#define BINCHUNK (1024) - -/* Maximum line of data accepted by the monitor: */ -#define MAXRECSIZE (550) -/* NOTE: This constant depends on the monitor being used. This value - is for PMON 5.x on the Cogent Vr4300 board. */ - -/* Create a FastLoad format record. - - *OUTBUF is the buffer into which a FastLoad formatted record is - written. On return, the pointer position represented by *OUTBUF - is updated to point at the end of the data, i.e. the next position - in the buffer that may be written. No attempt is made to NUL- - terminate this portion of the record written to the buffer. - - INBUF contains the binary input data from which the FastLoad - formatted record will be built. *INPTR is an index into this - buffer. *INPTR is updated as the input is consumed. Thus, on - return, the caller has access to the position of the next input - byte yet to be processed. INAMOUNT is the size, in bytes, of the - input data. - - *RECSIZE will be written with the size of the record written to the - output buffer prior to returning. This size does not include a - NUL-termination byte as none is written to the output buffer. - - *CSUM is the output buffer checksum. It is updated as data is - written to the output buffer. - - *ZEROFILL is the current number of 3-byte zero sequences that have - been encountered. It is both an input and an output to this - function. */ - -static void -pmon_make_fastrec (char **outbuf, unsigned char *inbuf, int *inptr, - int inamount, int *recsize, unsigned int *csum, - unsigned int *zerofill) -{ - int count = 0; - char *p = *outbuf; - - /* This is a simple check to ensure that our data will fit within - the maximum allowable record size. Each record output is 4bytes - in length. We must allow space for a pending zero fill command, - the record, and a checksum record. */ - while ((*recsize < (MAXRECSIZE - CHECKSIZE)) && ((inamount - *inptr) > 0)) - { - /* Process the binary data: */ - if ((inamount - *inptr) < 3) - { - if (*zerofill != 0) - *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); - sprintf (p, "/B"); - count = pmon_makeb64 (inbuf[*inptr], &p[2], 12, csum); - p += (2 + count); - *recsize += (2 + count); - (*inptr)++; - } - else - { - unsigned int value = ((inbuf[*inptr + 0] << 16) - | (inbuf[*inptr + 1] << 8) - | (inbuf[*inptr + 2])); - - /* Simple check for zero data. TODO: A better check would be - to check the last, and then the middle byte for being zero - (if the first byte is not). We could then check for - following runs of zeros, and if above a certain size it is - worth the 4 or 8 character hit of the byte insertions used - to pad to the start of the zeroes. NOTE: This also depends - on the alignment at the end of the zero run. */ - if (value == 0x00000000) - { - (*zerofill)++; - if (*zerofill == 0xFFF) /* 12bit counter */ - *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); - } - else - { - if (*zerofill != 0) - *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); - count = pmon_makeb64 (value, p, 24, csum); - p += count; - *recsize += count; - } - *inptr += 3; - } - } - - *outbuf = p; - return; -} - -/* Attempt to read an ACK. If an ACK is not read in a timely manner, - output the message specified by MESG. Return -1 for failure, 0 - for success. */ - -static int -pmon_check_ack (char *mesg) -{ -#if defined(DOETXACK) - int c; - - if (!tftp_in_use) - { - c = serial_readchar (udp_in_use ? udp_desc : mips_desc, - remote_timeout); - if ((c == SERIAL_TIMEOUT) || (c != 0x06)) - { - fprintf_unfiltered (gdb_stderr, - "Failed to receive valid ACK for %s\n", mesg); - return (-1); /* Terminate the download. */ - } - } -#endif /* DOETXACK */ - return (0); -} - -/* pmon_download - Send a sequence of characters to the PMON download port, - which is either a serial port or a UDP socket. */ - -static void -pmon_start_download (void) -{ - if (tftp_in_use) - { - /* Create the temporary download file. */ - if ((tftp_file = fopen (tftp_localname, "w")) == NULL) - perror_with_name (tftp_localname); - } - else - { - mips_send_command (udp_in_use ? LOAD_CMD_UDP : LOAD_CMD, 0); - mips_expect ("Downloading from "); - mips_expect (udp_in_use ? "udp" : "tty0"); - mips_expect (", ^C to abort\r\n"); - } -} - -/* Look for the string specified by STRING sent from the target board - during a download operation. If the string in question is not - seen, output an error message, remove the temporary file, if - appropriate, and return 0. Otherwise, return 1 to indicate - success. */ - -static int -mips_expect_download (char *string) -{ - if (!mips_expect (string)) - { - fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n"); - if (tftp_in_use) - remove (tftp_localname); /* Remove temporary file. */ - return 0; - } - else - return 1; -} - -/* Look for messages from the target board associated with the entry - address. - - NOTE: This function doesn't indicate success or failure, so we - have no way to determine whether or not the output from the board - was correctly seen. However, given that other items are checked - after this, it seems unlikely that those checks will pass if this - check doesn't first (silently) pass. */ - -static void -pmon_check_entry_address (char *entry_address, int final) -{ - char hexnumber[9]; /* Includes '\0' space. */ - - mips_expect_timeout (entry_address, tftp_in_use ? 15 : remote_timeout); - sprintf (hexnumber, "%x", final); - mips_expect (hexnumber); - mips_expect ("\r\n"); -} - -/* Look for messages from the target board showing the total number of - bytes downloaded to the board. Output 1 for success if the tail - end of the message was read correctly, 0 otherwise. */ - -static int -pmon_check_total (int bintotal) -{ - char hexnumber[9]; /* Includes '\0' space. */ - - mips_expect ("\r\ntotal = 0x"); - sprintf (hexnumber, "%x", bintotal); - mips_expect (hexnumber); - return mips_expect_download (" bytes\r\n"); -} - -/* Look for the termination messages associated with the end of - a download to the board. - - Also, when `tftp_in_use' is set, issue the load command to the - board causing the file to be transferred. (This is done prior - to looking for the above mentioned termination messages.) */ - -static void -pmon_end_download (int final, int bintotal) -{ - char hexnumber[9]; /* Includes '\0' space. */ - - if (tftp_in_use) - { - static char *load_cmd_prefix = "load -b -s "; - char *cmd; - struct stat stbuf; - - /* Close off the temporary file containing the load data. */ - fclose (tftp_file); - tftp_file = NULL; - - /* Make the temporary file readable by the world. */ - if (stat (tftp_localname, &stbuf) == 0) - chmod (tftp_localname, stbuf.st_mode | S_IROTH); - - /* Must reinitialize the board to prevent PMON from crashing. */ - if (mips_monitor != MON_ROCKHOPPER) - mips_send_command ("initEther\r", -1); - - /* Send the load command. */ - cmd = (char *) xmalloc (strlen (load_cmd_prefix) - + strlen (tftp_name) + 2); - strcpy (cmd, load_cmd_prefix); - strcat (cmd, tftp_name); - strcat (cmd, "\r"); - mips_send_command (cmd, 0); - xfree (cmd); - if (!mips_expect_download ("Downloading from ")) - return; - if (!mips_expect_download (tftp_name)) - return; - if (!mips_expect_download (", ^C to abort\r\n")) - return; - } - - /* Wait for the stuff that PMON prints after the load has completed. - The timeout value for use in the tftp case (15 seconds) was picked - arbitrarily but might be too small for really large downloads. FIXME. */ - switch (mips_monitor) - { - case MON_LSI: - pmon_check_ack ("termination"); - pmon_check_entry_address ("Entry address is ", final); - if (!pmon_check_total (bintotal)) - return; - break; - case MON_ROCKHOPPER: - if (!pmon_check_total (bintotal)) - return; - pmon_check_entry_address ("Entry Address = ", final); - break; - default: - pmon_check_entry_address ("Entry Address = ", final); - pmon_check_ack ("termination"); - if (!pmon_check_total (bintotal)) - return; - break; - } - - if (tftp_in_use) - remove (tftp_localname); /* Remove temporary file. */ -} - -/* Write the buffer specified by BUFFER of length LENGTH to either - the board or the temporary file that'll eventually be transferred - to the board. */ - -static void -pmon_download (char *buffer, int length) -{ - if (tftp_in_use) - { - size_t written; - - written = fwrite (buffer, 1, length, tftp_file); - if (written < length) - perror_with_name (tftp_localname); - } - else - serial_write (udp_in_use ? udp_desc : mips_desc, buffer, length); -} - -/* Open object or executable file, FILE, and send it to the board - using the FastLoad format. */ - -static void -pmon_load_fast (const char *file) -{ - bfd *abfd; - asection *s; - unsigned char *binbuf; - char *buffer; - int reclen; - unsigned int csum = 0; - int hashmark = !tftp_in_use; - int bintotal = 0; - int final = 0; - int finished = 0; - struct cleanup *cleanup; - - buffer = (char *) xmalloc (MAXRECSIZE + 1); - binbuf = (unsigned char *) xmalloc (BINCHUNK); - - abfd = gdb_bfd_open (file, NULL, -1); - if (!abfd) - { - printf_filtered ("Unable to open file %s\n", file); - return; - } - cleanup = make_cleanup_bfd_unref (abfd); - - if (bfd_check_format (abfd, bfd_object) == 0) - { - printf_filtered ("File is not an object file\n"); - do_cleanups (cleanup); - return; - } - - /* Setup the required download state: */ - mips_send_command ("set dlproto etxack\r", -1); - mips_send_command ("set dlecho off\r", -1); - /* NOTE: We get a "cannot set variable" message if the variable is - already defined to have the argument we give. The code doesn't - care, since it just scans to the next prompt anyway. */ - /* Start the download: */ - pmon_start_download (); - - /* Zero the checksum. */ - sprintf (buffer, "/Kxx\n"); - reclen = strlen (buffer); - pmon_download (buffer, reclen); - finished = pmon_check_ack ("/Kxx"); - - for (s = abfd->sections; s && !finished; s = s->next) - if (s->flags & SEC_LOAD) /* Only deal with loadable sections. */ - { - bintotal += bfd_get_section_size (s); - final = (s->vma + bfd_get_section_size (s)); - - printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, - (unsigned int) s->vma, - (unsigned int) (s->vma + bfd_get_section_size (s))); - gdb_flush (gdb_stdout); - - /* Output the starting address. */ - sprintf (buffer, "/A"); - reclen = pmon_makeb64 (s->vma, &buffer[2], 36, &csum); - buffer[2 + reclen] = '\n'; - buffer[3 + reclen] = '\0'; - reclen += 3; /* For the initial escape code and carriage return. */ - pmon_download (buffer, reclen); - finished = pmon_check_ack ("/A"); - - if (!finished) - { - unsigned int binamount; - unsigned int zerofill = 0; - char *bp = buffer; - unsigned int i; - - reclen = 0; - - for (i = 0; - i < bfd_get_section_size (s) && !finished; - i += binamount) - { - int binptr = 0; - - binamount = min (BINCHUNK, bfd_get_section_size (s) - i); - - bfd_get_section_contents (abfd, s, binbuf, i, binamount); - - /* This keeps a rolling checksum, until we decide to output - the line: */ - for (; ((binamount - binptr) > 0);) - { - pmon_make_fastrec (&bp, binbuf, &binptr, binamount, - &reclen, &csum, &zerofill); - if (reclen >= (MAXRECSIZE - CHECKSIZE)) - { - reclen = pmon_checkset (reclen, &bp, &csum); - pmon_download (buffer, reclen); - finished = pmon_check_ack ("data record"); - if (finished) - { - zerofill = 0; /* Do not transmit pending - zerofills. */ - break; - } - - if (deprecated_ui_load_progress_hook) - deprecated_ui_load_progress_hook (s->name, i); - - if (hashmark) - { - putchar_unfiltered ('#'); - gdb_flush (gdb_stdout); - } - - bp = buffer; - reclen = 0; /* buffer processed */ - } - } - } - - /* Ensure no out-standing zerofill requests: */ - if (zerofill != 0) - reclen = pmon_zeroset (reclen, &bp, &zerofill, &csum); - - /* and then flush the line: */ - if (reclen > 0) - { - reclen = pmon_checkset (reclen, &bp, &csum); - /* Currently pmon_checkset outputs the line terminator by - default, so we write out the buffer so far: */ - pmon_download (buffer, reclen); - finished = pmon_check_ack ("record remnant"); - } - } - - putchar_unfiltered ('\n'); - } - - /* Terminate the transfer. We know that we have an empty output - buffer at this point. */ - sprintf (buffer, "/E/E\n"); /* Include dummy padding characters. */ - reclen = strlen (buffer); - pmon_download (buffer, reclen); - - if (finished) - { /* Ignore the termination message: */ - serial_flush_input (udp_in_use ? udp_desc : mips_desc); - } - else - { /* Deal with termination message: */ - pmon_end_download (final, bintotal); - } - - do_cleanups (cleanup); - return; -} - -/* mips_load -- download a file. */ - -static void -mips_load (struct target_ops *self, const char *file, int from_tty) -{ - struct regcache *regcache; - - /* Get the board out of remote debugging mode. */ - if (mips_exit_debug ()) - error (_("mips_load: Couldn't get into monitor mode.")); - - if (mips_monitor != MON_IDT) - pmon_load_fast (file); - else - mips_load_srec (file); - - mips_initialize (); - - /* Finally, make the PC point at the start address. */ - regcache = get_current_regcache (); - if (mips_monitor != MON_IDT) - { - /* Work around problem where PMON monitor updates the PC after a load - to a different value than GDB thinks it has. The following ensures - that the regcache_write_pc() WILL update the PC value: */ - regcache_invalidate (regcache, - mips_regnum (get_regcache_arch (regcache))->pc); - } - if (exec_bfd) - regcache_write_pc (regcache, bfd_get_start_address (exec_bfd)); -} - -/* Check to see if a thread is still alive. */ - -static int -mips_thread_alive (struct target_ops *ops, ptid_t ptid) -{ - if (ptid_equal (ptid, remote_mips_ptid)) - /* The monitor's task is always alive. */ - return 1; - - return 0; -} - -/* Convert a thread ID to a string. Returns the string in a static - buffer. */ - -static char * -mips_pid_to_str (struct target_ops *ops, ptid_t ptid) -{ - static char buf[64]; - - if (ptid_equal (ptid, remote_mips_ptid)) - { - xsnprintf (buf, sizeof buf, "Thread <main>"); - return buf; - } - - return normal_pid_to_str (ptid); -} - -/* Pass the command argument as a packet to PMON verbatim. */ - -static void -pmon_command (char *args, int from_tty) -{ - char buf[DATA_MAXLEN + 1]; - int rlen; - - sprintf (buf, "0x0 %s", args); - mips_send_packet (buf, 1); - printf_filtered ("Send packet: %s\n", buf); - - rlen = mips_receive_packet (buf, 1, mips_receive_wait); - buf[rlen] = '\0'; - printf_filtered ("Received packet: %s\n", buf); -} - -/* -Wmissing-prototypes */ -extern initialize_file_ftype _initialize_remote_mips; - -/* Initialize mips_ops, lsi_ops, ddb_ops, pmon_ops, and rockhopper_ops. - Create target specific commands and perform other initializations - specific to this file. */ - -void -_initialize_remote_mips (void) -{ - /* Initialize the fields in mips_ops that are common to all four targets. */ - mips_ops.to_longname = "Remote MIPS debugging over serial line"; - mips_ops.to_close = mips_close; - mips_ops.to_detach = mips_detach; - mips_ops.to_resume = mips_resume; - mips_ops.to_fetch_registers = mips_fetch_registers; - mips_ops.to_store_registers = mips_store_registers; - mips_ops.to_prepare_to_store = mips_prepare_to_store; - mips_ops.to_xfer_partial = mips_xfer_partial; - mips_ops.to_files_info = mips_files_info; - mips_ops.to_insert_breakpoint = mips_insert_breakpoint; - mips_ops.to_remove_breakpoint = mips_remove_breakpoint; - mips_ops.to_insert_watchpoint = mips_insert_watchpoint; - mips_ops.to_remove_watchpoint = mips_remove_watchpoint; - mips_ops.to_stopped_by_watchpoint = mips_stopped_by_watchpoint; - mips_ops.to_can_use_hw_breakpoint = mips_can_use_watchpoint; - mips_ops.to_kill = mips_kill; - mips_ops.to_load = mips_load; - mips_ops.to_create_inferior = mips_create_inferior; - mips_ops.to_mourn_inferior = mips_mourn_inferior; - mips_ops.to_thread_alive = mips_thread_alive; - mips_ops.to_pid_to_str = mips_pid_to_str; - mips_ops.to_log_command = serial_log_command; - mips_ops.to_stratum = process_stratum; - mips_ops.to_has_all_memory = default_child_has_all_memory; - mips_ops.to_has_memory = default_child_has_memory; - mips_ops.to_has_stack = default_child_has_stack; - mips_ops.to_has_registers = default_child_has_registers; - mips_ops.to_has_execution = default_child_has_execution; - mips_ops.to_magic = OPS_MAGIC; - - /* Copy the common fields to all four target vectors. */ - rockhopper_ops = pmon_ops = ddb_ops = lsi_ops = mips_ops; - - /* Initialize target-specific fields in the target vectors. */ - mips_ops.to_shortname = "mips"; - mips_ops.to_doc = "\ -Debug a board using the MIPS remote debugging protocol over a serial line.\n\ -The argument is the device it is connected to or, if it contains a colon,\n\ -HOST:PORT to access a board over a network"; - mips_ops.to_open = mips_open; - mips_ops.to_wait = mips_wait; - - pmon_ops.to_shortname = "pmon"; - pmon_ops.to_doc = "\ -Debug a board using the PMON MIPS remote debugging protocol over a serial\n\ -line. The argument is the device it is connected to or, if it contains a\n\ -colon, HOST:PORT to access a board over a network"; - pmon_ops.to_open = pmon_open; - pmon_ops.to_wait = mips_wait; - - ddb_ops.to_shortname = "ddb"; - ddb_ops.to_doc = "\ -Debug a board using the PMON MIPS remote debugging protocol over a serial\n\ -line. The first argument is the device it is connected to or, if it contains\n\ -a colon, HOST:PORT to access a board over a network. The optional second\n\ -parameter is the temporary file in the form HOST:FILENAME to be used for\n\ -TFTP downloads to the board. The optional third parameter is the local name\n\ -of the TFTP temporary file, if it differs from the filename seen by the board."; - ddb_ops.to_open = ddb_open; - ddb_ops.to_wait = mips_wait; - - rockhopper_ops.to_shortname = "rockhopper"; - rockhopper_ops.to_doc = ddb_ops.to_doc; - rockhopper_ops.to_open = rockhopper_open; - rockhopper_ops.to_wait = mips_wait; - - lsi_ops.to_shortname = "lsi"; - lsi_ops.to_doc = pmon_ops.to_doc; - lsi_ops.to_open = lsi_open; - lsi_ops.to_wait = mips_wait; - - /* Add the targets. */ - add_target (&mips_ops); - add_target (&pmon_ops); - add_target (&ddb_ops); - add_target (&lsi_ops); - add_target (&rockhopper_ops); - - add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\ -Set timeout in seconds for remote MIPS serial I/O."), _("\ -Show timeout in seconds for remote MIPS serial I/O."), NULL, - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_setshow_zinteger_cmd ("retransmit-timeout", no_class, - &mips_retransmit_wait, _("\ -Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\ -Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\ -This is the number of seconds to wait for an acknowledgement to a packet\n\ -before resending the packet."), - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_setshow_zinteger_cmd ("syn-garbage-limit", no_class, - &mips_syn_garbage, _("\ -Set the maximum number of characters to ignore when scanning for a SYN."), _("\ -Show the maximum number of characters to ignore when scanning for a SYN."), _("\ -This is the maximum number of characters GDB will ignore when trying to\n\ -synchronize with the remote system. A value of -1 means that there is no\n\ -limit. (Note that these characters are printed out even though they are\n\ -ignored.)"), - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_setshow_string_cmd ("monitor-prompt", class_obscure, - &mips_monitor_prompt, _("\ -Set the prompt that GDB expects from the monitor."), _("\ -Show the prompt that GDB expects from the monitor."), NULL, - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_setshow_zinteger_cmd ("monitor-warnings", class_obscure, - &monitor_warnings, _("\ -Set printing of monitor warnings."), _("\ -Show printing of monitor warnings."), _("\ -When enabled, monitor warnings about hardware breakpoints will be displayed."), - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - - add_com ("pmon", class_obscure, pmon_command, - _("Send a packet to PMON (must be in debug mode).")); - - add_setshow_boolean_cmd ("mask-address", no_class, &mask_address_p, _("\ -Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\ -Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\ -Use \"on\" to enable the masking and \"off\" to disable it."), - NULL, - NULL, /* FIXME: i18n: */ - &setlist, &showlist); - remote_mips_ptid = ptid_build (42000, 0, 42000); -} diff --git a/gdb/symfile.c b/gdb/symfile.c index e11c280..0d67bfd 100644 --- a/gdb/symfile.c +++ b/gdb/symfile.c @@ -2142,8 +2142,6 @@ generic_load (const char *args, int from_tty) ui_out_text (uiout, ", load size "); ui_out_field_fmt (uiout, "load-size", "%lu", total_progress.data_count); ui_out_text (uiout, "\n"); - /* We were doing this in remote-mips.c, I suspect it is right - for other targets too. */ regcache_write_pc (get_current_regcache (), entry); /* Reset breakpoints, now that we have changed the load image. For @@ -2156,12 +2154,6 @@ generic_load (const char *args, int from_tty) breakpoint_re_set (); - /* FIXME: are we supposed to call symbol_file_add or not? According - to a comment from remote-mips.c (where a call to symbol_file_add - was commented out), making the call confuses GDB if more than one - file is loaded in. Some targets do (e.g., remote-vx.c) but - others don't (or didn't - perhaps they have all been deleted). */ - print_transfer_performance (gdb_stdout, total_progress.data_count, total_progress.write_count, &start_time, &end_time); |