aboutsummaryrefslogtreecommitdiff
path: root/gdb
diff options
context:
space:
mode:
Diffstat (limited to 'gdb')
-rw-r--r--gdb/ChangeLog69
-rw-r--r--gdb/Makefile.in26
-rw-r--r--gdb/config/i386/cygwin32.mh13
-rw-r--r--gdb/config/powerpc/ppc-eabi.mt2
-rw-r--r--gdb/config/powerpc/ppc-sim.mt2
-rwxr-xr-xgdb/configure182
-rw-r--r--gdb/configure.in3
-rw-r--r--gdb/ocd.c (renamed from gdb/remote-wiggler.c)595
-rw-r--r--gdb/ocd.h132
-rw-r--r--gdb/ppc-bdm.c260
-rw-r--r--gdb/ser-ocd.c174
-rw-r--r--gdb/wigglers.def3
12 files changed, 911 insertions, 550 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 5deb3f2..fbc6650 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,72 @@
+Wed Aug 6 16:15:31 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
+ sub makes, change clean rule to also remove *.a to remove
+ libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
+ remove remote-wiggler.o
+ * configure.in: add DLLTOOL support
+ * configure: regenerate
+ * wigglers.def: new file for imports for wigglers.dll
+ * ser-ocd.c: new file which is layer between ocd.c and either the
+ wigglers.dll or the target box, only stub so far
+ * config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
+ * config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
+ * config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
+ to XDEPFILES, add rules to build libwigglers.a
+
+ checking in changes of Stu Grossman <grossman@cygnus.com>:
+ * remote-wiggler.c: delete
+ * ocd.c: new, was remote-wiggler.c
+ always include sys/types.h, include ocd.h, move WIGGLER
+ commands and many wiggler prototypes to ocd.h, make wiggler_desc
+ static, stop making local wiggler functions static,
+ define write_mem_command for wiggler_write_bytes
+ (wiggler_start_remote): stop hardcoding the target type,
+ instead set and use a target_type variable.
+ (wiggler_open): add new target_type and ops args
+ (wiggler_wait): now no longer takes pid and target_status as args,
+ stop trying to set target_status struct, remove BGND insn
+ checks
+ (read_bdm_registers): renamed to wiggler_read_bdm_registers
+ (wiggler_read_bdm_registers): numregs arg changed to reglen arg,
+ remove pktlen check, set reglen instead of numregs
+ (dump_all_bdm_regs): delete
+ (wiggler_fetch_registers): delete
+ (wiggler_prepare_to_store): now just an empty function
+ (wiggler_store_registers): delete
+ (wiggler_read_bdm_register): new
+ (wiggler_write_bdm_registers): new
+ (wiggler_write_bdm_register): new
+ (wiggler_write_bytes): use write_mem_command variable instead of
+ WIGGLER_WRITE_MEM
+ (get_packet): renamed to wiggler_get_packet, change refs throughout
+ (put_packet): renamed to wiggler_put_packet, change refs throughout
+ (wiggler_get_packet): add break to default case of switch,
+ change length of WIGGLER_GET_VERSION len to 10 from 4 to match
+ specs
+ (wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
+ (flash_xfer_memory): delete
+ (noop_store_registers): new placeholder replacement for
+ target_store_registers() which prevents generic_load from trying to
+ set up the PC.
+ (bdm_update_flash_command): add store_registers_tmp variable,
+ make handling of wiggler_ops more generic -- define wiggler_ops
+ in a target-specific file instead (such as ppc-bdm.c in the case
+ of the ppc), use current_target to deal with registers again
+ making this file less target-specific.
+ (bdm_read_register_command): new
+ (_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
+ comment out add_cmd ("read-register", ...)
+ * ocd.h: new, contains common wiggler prototypes, command definitions
+ * ppc-bdm.c: file for ppc-specific OCD code, including target_ops
+ structure for ppc bdm
+ (bdm_ppc_open): new
+ (bdm_ppc_wait): new
+ (bdm_ppc_fetch_registers): new
+ (bdm_ppc_store_registers_: new
+ (_initialize_bdm_ppc): new
+ * config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
+
start-sanitize-tic80
Tue Aug 5 23:56:14 1997 Mark Alexander <marka@cygnus.com>
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 0637f5b..99309c1 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -51,6 +51,7 @@ AR = @AR@
AR_FLAGS = qv
RANLIB = @RANLIB@
AWK = @AWK@
+DLLTOOL = @DLLTOOL@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
@@ -137,7 +138,7 @@ TCL_CFLAGS = @TCLHDIR@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
-TK_CFLAGS = @TKHDIR@
+TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@
# Where is Itcl? Typically in ../itcl.
ITCL_CFLAGS = @ITCLHDIR@
@@ -151,6 +152,9 @@ X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
+WIN32LDAPP = @WIN32LDAPP@
+WIN32LIBS = @WIN32LIBS@
+
ENABLE_GDBTK= @ENABLE_GDBTK@
ENABLE_IDE= @ENABLE_IDE@
@@ -228,7 +232,7 @@ INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
-lmmalloc -liberty
CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) \
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
- $(MMALLOC) $(LIBIBERTY)
+ $(MMALLOC) $(LIBIBERTY) $(WIN32LIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
$(OPCODES) $(MMALLOC) $(LIBIBERTY)
@@ -282,6 +286,7 @@ FLAGS_TO_PASS = \
"CHILL_LIB=$(CHILL_LIB)" \
"CXX=$(CXX)" \
"CXXFLAGS=$(CXXFLAGS)" \
+ "DLLTOOL=$(DLLTOOL)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
@@ -642,7 +647,7 @@ init.c: $(OBS) $(TSOBS)
# Removing the old gdb first works better if it is running, at least on SunOS.
gdb: $(OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
rm -f gdb
- $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) -o gdb \
+ $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
nlm: force
@@ -753,7 +758,7 @@ tags: TAGS
clean mostlyclean:
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f *.o $(ADD_FILES) *~ init.c-tmp
+ rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp
rm -f init.c version.c
rm -f gdb core make.log libgdb-files
rm -f gdb[0-9]
@@ -955,7 +960,7 @@ ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
remote-st.c remote-utils.c dcache.c \
remote-udi.c remote-vx.c remote-vx29k.c \
rs6000-nat.c rs6000-tdep.c \
- ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
+ ser-go32.c ser-ocd.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
symm-tdep.c symm-nat.c \
tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
@@ -1381,6 +1386,10 @@ parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
gdb_string.h
+ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) gdb_string.h $(frame_h) \
+ $(inferior_h) $(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) \
+ objfiles.h gdb-stabs.h serial.h ocd.h
+
ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
@@ -1459,8 +1468,9 @@ remote-vx29k.o: remote-vx29k.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb_string.h
-remote-wiggler.o: remote-wiggler.c $(wait_h) complaints.h $(defs_h) \
- $(gdbcmd_h) $(gdbcore_h) $(inferior_h) target.h
+ocd.o: ocd.c ocd.h $(gdbcore_h) gdb_string.h $(frame_h) $(inferior_h) \
+ $(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) objfiles.h \
+ gdb-stabs.h $(dcache_h) serial.h
remote-utils.o: remote-utils.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(remote_utils_h) gdb_string.h
@@ -1493,6 +1503,8 @@ ser-go32.o: ser-go32.c $(defs_h) serial.h
ser-mac.o: ser-mac.c $(defs_h) serial.h signals.h
+ser-ocd.o: ser-ocd.c $(defs_h) serial.h signals.h gdb_string.h
+
ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h gdb_string.h
ser-unix.o: ser-unix.c $(defs_h) serial.h
diff --git a/gdb/config/i386/cygwin32.mh b/gdb/config/i386/cygwin32.mh
index e3686d1..0655e1e 100644
--- a/gdb/config/i386/cygwin32.mh
+++ b/gdb/config/i386/cygwin32.mh
@@ -1,8 +1,19 @@
MH_CFLAGS=
XM_FILE=xm-cygwin32.h
-XDEPFILES=ser-tcp.o
+XDEPFILES=ser-tcp.o ocd.o ser-ocd.o libwigglers.a
TERMCAP=
NATDEPFILES= win32-nat.o
NAT_FILE=../nm-empty.h
XM_CLIBS=
MMALLOC_CFLAGS = -I$(MMALLOC_SRC) -DMMCHECK_FORCE=1
+
+# BDM specific definitions for accessing the Wigglers.dll on Win32
+BDM_DLLNAME = Wigglers.dll
+BDM_LIBNAME = libwigglers.a
+BDM_DEFFILE = $(srcdir)/wigglers.def
+
+# Makefile target for making BDM_LIBNAME
+libwigglers.def:
+ $(DLLTOOL) --as=i386-cygwin32-as -k --dllname $(BDM_DLLNAME) --output-lib $(BDM_LIBNAME) --def $(BDM_DEFFILE)
+
+libwigglers.a: libwigglers.def
diff --git a/gdb/config/powerpc/ppc-eabi.mt b/gdb/config/powerpc/ppc-eabi.mt
index b5da734..680ef1c 100644
--- a/gdb/config/powerpc/ppc-eabi.mt
+++ b/gdb/config/powerpc/ppc-eabi.mt
@@ -1,3 +1,3 @@
# Target: PowerPC running eabi
-TDEPFILES= rs6000-tdep.o remote-ppcbug.o
+TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o
TM_FILE= tm-ppc-eabi.h
diff --git a/gdb/config/powerpc/ppc-sim.mt b/gdb/config/powerpc/ppc-sim.mt
index 5a590ac..f48d4db 100644
--- a/gdb/config/powerpc/ppc-sim.mt
+++ b/gdb/config/powerpc/ppc-sim.mt
@@ -1,5 +1,5 @@
# Target: PowerPC running eabi under the simulator
-TDEPFILES= rs6000-tdep.o remote-ppcbug.o
+TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o
TM_FILE= tm-ppc-eabi.h
SIM_OBS = remote-sim.o
diff --git a/gdb/configure b/gdb/configure
index 0e08faf..5d35b54 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -864,6 +864,9 @@ else
fi
+DLLTOOL=${DLLTOOL-dlltool}
+
+
ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
if test -f $ac_dir/install-sh; then
@@ -911,7 +914,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:915: checking host system type" >&5
+echo "configure:918: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -932,7 +935,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:936: checking target system type" >&5
+echo "configure:939: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -950,7 +953,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:954: checking build system type" >&5
+echo "configure:957: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -995,7 +998,7 @@ configdirs="doc testsuite"
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:999: checking for a BSD compatible install" >&5
+echo "configure:1002: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1053,7 +1056,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1057: checking for $ac_word" >&5
+echo "configure:1060: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1084,7 +1087,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1088: checking for $ac_word" >&5
+echo "configure:1091: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1115,7 +1118,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1119: checking for $ac_word" >&5
+echo "configure:1122: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1151,7 +1154,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1155: checking for $ac_word" >&5
+echo "configure:1158: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1185,7 +1188,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1189: checking for $ac_word" >&5
+echo "configure:1192: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1235,12 +1238,12 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1239: checking return type of signal handlers" >&5
+echo "configure:1242: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1244 "configure"
+#line 1247 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
@@ -1257,7 +1260,7 @@ int main() {
int i;
; return 0; }
EOF
-if { (eval echo configure:1261: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1264: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
@@ -1277,12 +1280,12 @@ EOF
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1281: checking for ANSI C header files" >&5
+echo "configure:1284: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1286 "configure"
+#line 1289 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
@@ -1290,7 +1293,7 @@ else
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1294: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1307,7 +1310,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1311 "configure"
+#line 1314 "configure"
#include "confdefs.h"
#include <string.h>
EOF
@@ -1325,7 +1328,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1329 "configure"
+#line 1332 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
@@ -1346,7 +1349,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
-#line 1350 "configure"
+#line 1353 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1357,7 +1360,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
-if { (eval echo configure:1361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
@@ -1384,17 +1387,17 @@ for ac_hdr in limits.h memory.h string.h strings.h unistd.h termios.h termio.h s
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1388: checking for $ac_hdr" >&5
+echo "configure:1391: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1393 "configure"
+#line 1396 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1401: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1421,12 +1424,12 @@ fi
done
echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:1425: checking whether stat file-mode macros are broken" >&5
+echo "configure:1428: checking whether stat file-mode macros are broken" >&5
if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1430 "configure"
+#line 1433 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
@@ -1478,12 +1481,12 @@ fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1482: checking for working const" >&5
+echo "configure:1485: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1487 "configure"
+#line 1490 "configure"
#include "confdefs.h"
int main() {
@@ -1532,7 +1535,7 @@ ccp = (char const *const *) p;
; return 0; }
EOF
-if { (eval echo configure:1536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1539: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
@@ -1556,12 +1559,12 @@ fi
for ac_func in setpgid sbrk select poll
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1560: checking for $ac_func" >&5
+echo "configure:1563: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1565 "configure"
+#line 1568 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1584,7 +1587,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1626,19 +1629,19 @@ EOF
fi
echo $ac_n "checking for gregset_t type""... $ac_c" 1>&6
-echo "configure:1630: checking for gregset_t type" >&5
+echo "configure:1633: checking for gregset_t type" >&5
if eval "test \"`echo '$''{'gdb_cv_have_gregset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1635 "configure"
+#line 1638 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
gregset_t *gregsetp = 0
; return 0; }
EOF
-if { (eval echo configure:1642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gdb_cv_have_gregset_t=yes
else
@@ -1659,19 +1662,19 @@ EOF
fi
echo $ac_n "checking for fpregset_t type""... $ac_c" 1>&6
-echo "configure:1663: checking for fpregset_t type" >&5
+echo "configure:1666: checking for fpregset_t type" >&5
if eval "test \"`echo '$''{'gdb_cv_have_fpregset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1668 "configure"
+#line 1671 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
fpregset_t *fpregsetp = 0
; return 0; }
EOF
-if { (eval echo configure:1675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gdb_cv_have_fpregset_t=yes
else
@@ -1692,7 +1695,7 @@ EOF
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:1696: checking for main in -lm" >&5
+echo "configure:1699: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1700,14 +1703,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1704 "configure"
+#line 1707 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -1737,12 +1740,12 @@ fi
echo $ac_n "checking for long long support in compiler""... $ac_c" 1>&6
-echo "configure:1741: checking for long long support in compiler" >&5
+echo "configure:1744: checking for long long support in compiler" >&5
if eval "test \"`echo '$''{'gdb_cv_c_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1746 "configure"
+#line 1749 "configure"
#include "confdefs.h"
int main() {
@@ -1752,7 +1755,7 @@ int main() {
; return 0; }
EOF
-if { (eval echo configure:1756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gdb_cv_c_long_long=yes
else
@@ -1774,7 +1777,7 @@ fi
echo $ac_n "checking for long long support in printf""... $ac_c" 1>&6
-echo "configure:1778: checking for long long support in printf" >&5
+echo "configure:1781: checking for long long support in printf" >&5
if eval "test \"`echo '$''{'gdb_cv_printf_has_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1782,7 +1785,7 @@ else
gdb_cv_printf_has_long_long=no
else
cat > conftest.$ac_ext <<EOF
-#line 1786 "configure"
+#line 1789 "configure"
#include "confdefs.h"
int main () {
@@ -1792,7 +1795,7 @@ int main () {
return (strcmp ("12345", buf));
}
EOF
-if { (eval echo configure:1796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
gdb_cv_printf_has_long_long=yes
else
@@ -1816,19 +1819,19 @@ echo "$ac_t""$gdb_cv_printf_has_long_long" 1>&6
echo $ac_n "checking for long double support in compiler""... $ac_c" 1>&6
-echo "configure:1820: checking for long double support in compiler" >&5
+echo "configure:1823: checking for long double support in compiler" >&5
if eval "test \"`echo '$''{'ac_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1825 "configure"
+#line 1828 "configure"
#include "confdefs.h"
int main() {
long double foo;
; return 0; }
EOF
-if { (eval echo configure:1832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_long_double=yes
else
@@ -1850,7 +1853,7 @@ fi
echo $ac_n "checking for long double support in printf""... $ac_c" 1>&6
-echo "configure:1854: checking for long double support in printf" >&5
+echo "configure:1857: checking for long double support in printf" >&5
if eval "test \"`echo '$''{'gdb_cv_printf_has_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1858,7 +1861,7 @@ else
gdb_cv_printf_has_long_double=no
else
cat > conftest.$ac_ext <<EOF
-#line 1862 "configure"
+#line 1865 "configure"
#include "confdefs.h"
int main () {
@@ -1868,7 +1871,7 @@ int main () {
return (strncmp ("3.14159", buf, 7));
}
EOF
-if { (eval echo configure:1872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
gdb_cv_printf_has_long_double=yes
else
@@ -1894,17 +1897,17 @@ for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1898: checking for $ac_hdr" >&5
+echo "configure:1901: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1903 "configure"
+#line 1906 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1911: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1933,12 +1936,12 @@ done
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1937: checking for $ac_func" >&5
+echo "configure:1940: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1942 "configure"
+#line 1945 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1961,7 +1964,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1986,7 +1989,7 @@ fi
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:1990: checking for working mmap" >&5
+echo "configure:1993: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1994,7 +1997,7 @@ else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 1998 "configure"
+#line 2001 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
@@ -2134,7 +2137,7 @@ main()
}
EOF
-if { (eval echo configure:2138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
@@ -2158,12 +2161,12 @@ fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:2162: checking whether malloc must be declared" >&5
+echo "configure:2165: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2167 "configure"
+#line 2170 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2184,7 +2187,7 @@ int main() {
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:2188: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2191: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
@@ -2206,12 +2209,12 @@ EOF
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:2210: checking whether realloc must be declared" >&5
+echo "configure:2213: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2215 "configure"
+#line 2218 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2232,7 +2235,7 @@ int main() {
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:2236: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2239: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
@@ -2254,12 +2257,12 @@ EOF
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:2258: checking whether free must be declared" >&5
+echo "configure:2261: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2263 "configure"
+#line 2266 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2280,7 +2283,7 @@ int main() {
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:2284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2287: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
@@ -2308,7 +2311,7 @@ if test ${build} = ${host} -a ${host} = ${target} ; then
case ${host_os} in
hpux*)
echo $ac_n "checking for HPUX/OSF thread support""... $ac_c" 1>&6
-echo "configure:2312: checking for HPUX/OSF thread support" >&5
+echo "configure:2315: checking for HPUX/OSF thread support" >&5
if test -f /usr/include/dce/cma_config.h ; then
if test "$GCC" = "yes" ; then
echo "$ac_t""yes" 1>&6
@@ -2326,7 +2329,7 @@ EOF
;;
solaris*)
echo $ac_n "checking for Solaris thread debugging library""... $ac_c" 1>&6
-echo "configure:2330: checking for Solaris thread debugging library" >&5
+echo "configure:2333: checking for Solaris thread debugging library" >&5
if test -f /usr/lib/libthread_db.so.1 ; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
@@ -2335,7 +2338,7 @@ EOF
CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2339: checking for dlopen in -ldl" >&5
+echo "configure:2342: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -2343,7 +2346,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2347 "configure"
+#line 2350 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -2354,7 +2357,7 @@ int main() {
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -2480,12 +2483,12 @@ fi
# In the cygwin32 environment, we need some additional flags.
echo $ac_n "checking for cygwin32""... $ac_c" 1>&6
-echo "configure:2484: checking for cygwin32" >&5
+echo "configure:2487: checking for cygwin32" >&5
if eval "test \"`echo '$''{'gdb_cv_os_cygwin32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2489 "configure"
+#line 2492 "configure"
#include "confdefs.h"
#ifdef __CYGWIN32__
@@ -2538,7 +2541,7 @@ if test "${with_tclconfig+set}" = set; then
fi
echo $ac_n "checking for Tcl configuration""... $ac_c" 1>&6
-echo "configure:2542: checking for Tcl configuration" >&5
+echo "configure:2545: checking for Tcl configuration" >&5
if eval "test \"`echo '$''{'ac_cv_c_tclconfig'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2646,7 +2649,7 @@ if test "${with_tkconfig+set}" = set; then
fi
echo $ac_n "checking for Tk configuration""... $ac_c" 1>&6
-echo "configure:2650: checking for Tk configuration" >&5
+echo "configure:2653: checking for Tk configuration" >&5
if eval "test \"`echo '$''{'ac_cv_c_tkconfig'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2742,7 +2745,7 @@ fi
no_tcl=true
echo $ac_n "checking for Tcl private headers. dir=${configdir}""... $ac_c" 1>&6
-echo "configure:2746: checking for Tcl private headers. dir=${configdir}" >&5
+echo "configure:2749: checking for Tcl private headers. dir=${configdir}" >&5
# Check whether --with-tclinclude or --without-tclinclude was given.
if test "${with_tclinclude+set}" = set; then
withval="$with_tclinclude"
@@ -2808,17 +2811,17 @@ fi
if test x"${ac_cv_c_tclh}" = x ; then
ac_safe=`echo "tclInt.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tclInt.h""... $ac_c" 1>&6
-echo "configure:2812: checking for tclInt.h" >&5
+echo "configure:2815: checking for tclInt.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2817 "configure"
+#line 2820 "configure"
#include "confdefs.h"
#include <tclInt.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2822: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2878,7 +2881,7 @@ fi
#
no_tk=true
echo $ac_n "checking for Tk private headers""... $ac_c" 1>&6
-echo "configure:2882: checking for Tk private headers" >&5
+echo "configure:2885: checking for Tk private headers" >&5
# Check whether --with-tkinclude or --without-tkinclude was given.
if test "${with_tkinclude+set}" = set; then
withval="$with_tkinclude"
@@ -2944,17 +2947,17 @@ fi
if test x"${ac_cv_c_tkh}" = x ; then
ac_safe=`echo "tk.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tk.h""... $ac_c" 1>&6
-echo "configure:2948: checking for tk.h" >&5
+echo "configure:2951: checking for tk.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2953 "configure"
+#line 2956 "configure"
#include "confdefs.h"
#include <tk.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2961: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -3000,7 +3003,7 @@ fi
echo $ac_n "checking for Itcl private headers. srcdir=${srcdir}""... $ac_c" 1>&6
-echo "configure:3004: checking for Itcl private headers. srcdir=${srcdir}" >&5
+echo "configure:3007: checking for Itcl private headers. srcdir=${srcdir}" >&5
if test x"${ac_cv_c_itclh}" = x ; then
for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ; do
if test -f $i/src/itcl.h ; then
@@ -3023,7 +3026,7 @@ fi
echo $ac_n "checking for Tix private headers. srcdir=${srcdir}""... $ac_c" 1>&6
-echo "configure:3027: checking for Tix private headers. srcdir=${srcdir}" >&5
+echo "configure:3030: checking for Tix private headers. srcdir=${srcdir}" >&5
if test x"${ac_cv_c_tixh}" = x ; then
for i in ${srcdir}/../tix ${srcdir}/../../tix ${srcdir}/../../../tix ; do
if test -f $i/generic/tix.h ; then
@@ -3229,7 +3232,7 @@ links="${links} nm.h"
fi
# start-sanitize-gdbtk
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:3233: checking whether ln -s works" >&5
+echo "configure:3236: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3398,6 +3401,7 @@ s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
+s%@DLLTOOL@%$DLLTOOL%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
diff --git a/gdb/configure.in b/gdb/configure.in
index d9fe00a..cb72af8 100644
--- a/gdb/configure.in
+++ b/gdb/configure.in
@@ -28,6 +28,9 @@ AC_AIX
AC_MINIX
AC_ISC_POSIX
+DLLTOOL=${DLLTOOL-dlltool}
+AC_SUBST(DLLTOOL)
+
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
diff --git a/gdb/remote-wiggler.c b/gdb/ocd.c
index c767641..b20bd9c 100644
--- a/gdb/remote-wiggler.c
+++ b/gdb/ocd.c
@@ -1,5 +1,5 @@
/* Remote target communications for the Macraigor Systems BDM Wiggler
- Copyright 1996 Free Software Foundation, Inc.
+ Copyright 1996, 1997 Free Software Foundation, Inc.
This file is part of GDB.
@@ -30,122 +30,22 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "gdbcmd.h"
#include "objfiles.h"
#include "gdb-stabs.h"
-
#include "dcache.h"
-
-#ifdef USG
#include <sys/types.h>
-#endif
-
#include <signal.h>
#include "serial.h"
-
-/* Wiggler serial protocol definitions */
-
-#define DLE 020 /* Quote char */
-#define SYN 026 /* Start of packet */
-#define RAW_SYN ((026 << 8) | 026) /* get_quoted_char found a naked SYN */
-
-/* Status flags */
-
-#define WIGGLER_FLAG_RESET 0x01 /* Target is being reset */
-#define WIGGLER_FLAG_STOPPED 0x02 /* Target is halted */
-#define WIGGLER_FLAG_BDM 0x04 /* Target is in BDM */
-#define WIGGLER_FLAG_PWF 0x08 /* Power failed */
-#define WIGGLER_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
-
-#define WIGGLER_AYT 0x0 /* Are you there? */
-#define WIGGLER_GET_VERSION 0x1 /* Get Version */
-#define WIGGLER_SET_BAUD_RATE 0x2 /* Set Baud Rate */
-#define WIGGLER_INIT 0x10 /* Initialize Wiggler */
-#define WIGGLER_SET_SPEED 0x11 /* Set Speed */
-#define WIGGLER_GET_STATUS_MASK 0x12 /* Get Status Mask */
-#define WIGGLER_GET_CTRS 0x13 /* Get Error Counters */
-#define WIGGLER_SET_FUNC_CODE 0x14 /* Set Function Code */
-#define WIGGLER_SET_CTL_FLAGS 0x15 /* Set Control Flags */
-#define WIGGLER_SET_BUF_ADDR 0x16 /* Set Register Buffer Address */
-#define WIGGLER_RUN 0x20 /* Run Target from PC */
-#define WIGGLER_RUN_ADDR 0x21 /* Run Target from Specified Address */
-#define WIGGLER_STOP 0x22 /* Stop Target */
-#define WIGGLER_RESET_RUN 0x23 /* Reset Target and Run */
-#define WIGGLER_RESET 0x24 /* Reset Target and Halt */
-#define WIGGLER_STEP 0x25 /* Single step */
-#define WIGGLER_READ_REGS 0x30 /* Read Registers */
-#define WIGGLER_WRITE_REGS 0x31 /* Write Registers */
-#define WIGGLER_READ_MEM 0x32 /* Read Memory */
-#define WIGGLER_WRITE_MEM 0x33 /* Write Memory */
-#define WIGGLER_FILL_MEM 0x34 /* Fill Memory */
-#define WIGGLER_MOVE_MEM 0x35 /* Move Memory */
-
-#define WIGGLER_READ_INT_MEM 0x80 /* Read Internal Memory */
-#define WIGGLER_WRITE_INT_MEM 0x81 /* Write Internal Memory */
-#define WIGGLER_JUMP 0x82 /* Jump to Subroutine */
-
-#define WIGGLER_ERASE_FLASH 0x90 /* Erase flash memory */
-#define WIGGLER_PROGRAM_FLASH 0x91 /* Write flash memory */
-#define WIGGLER_EXIT_MON 0x93 /* Exit the flash programming monitor */
-#define WIGGLER_ENTER_MON 0x94 /* Enter the flash programming monitor */
-
-#define WIGGLER_SET_STATUS 0x0a /* Set status */
-#define WIGGLER_FLAG_STOP 0x0 /* Stop the target, enter BDM */
-#define WIGGLER_FLAG_START 0x01 /* Start the target at PC */
-#define WIGGLER_FLAG_RETURN_STATUS 0x04 /* Return async status */
-
-/* Stuff that should be in tm-xxx files. */
-#if 1
-#define BDM_NUM_REGS 24
-#define BDM_REGMAP 0, 1, 2, 3, 4, 5, 6, 7, /* d0 -> d7 */ \
- 8, 9, 10, 11, 12, 13, 14, 15, /* a0 -> a7 */ \
- 18, 16, /* ps, pc */ \
- -1, -1, -1, -1, -1, -1, -1, -1, /* fp0 -> fp7 */ \
- -1, -1, -1, -1, -1 /* fpcontrol, fpstatus, fpiaddr, fpcode, fpflags */
-#define BDM_BREAKPOINT 0x4a, 0xfa /* BGND insn */
-#else
-#define BDM_NUM_REGS 24
-#define BDM_REGMAP 8, 9, 10, 11, 12, 13, 14, 15, /* d0 -> d7 */ \
- 16, 17, 18, 19, 20, 21, 22, 23, /* a0 -> a7 */ \
- 4, 0, /* ps, pc */ \
- -1, -1, -1, -1, -1, -1, -1, -1, /* fp0 -> fp7 */ \
- -1, -1, -1, -1, -1 /* fpcontrol, fpstatus, fpiaddr, fpcode, fpflags */
-#define WIGGLER_POLL
-#endif
+#include "ocd.h"
/* Prototypes for local functions */
-static void wiggler_stop PARAMS ((void));
-
-static void put_packet PARAMS ((unsigned char *packet, int pktlen));
-static unsigned char * get_packet PARAMS ((int cmd, int *pktlen, int timeout));
-
static int wiggler_write_bytes PARAMS ((CORE_ADDR memaddr,
char *myaddr, int len));
static int wiggler_read_bytes PARAMS ((CORE_ADDR memaddr,
char *myaddr, int len));
-static void wiggler_files_info PARAMS ((struct target_ops *ignore));
-
-static int wiggler_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
- int len, int should_write,
- struct target_ops *target));
-
-static void wiggler_prepare_to_store PARAMS ((void));
-
-static void wiggler_fetch_registers PARAMS ((int regno));
-
-static void wiggler_resume PARAMS ((int pid, int step,
- enum target_signal siggnal));
-
static int wiggler_start_remote PARAMS ((char *dummy));
-static void wiggler_open PARAMS ((char *name, int from_tty));
-
-static void wiggler_close PARAMS ((int quitting));
-
-static void wiggler_store_registers PARAMS ((int regno));
-
-static void wiggler_mourn PARAMS ((void));
-
static int readchar PARAMS ((int timeout));
static void reset_packet PARAMS ((void));
@@ -156,12 +56,6 @@ static int get_quoted_char PARAMS ((int timeout));
static void put_quoted_char PARAMS ((int c));
-static int wiggler_wait PARAMS ((int pid, struct target_waitstatus *status));
-
-static void wiggler_kill PARAMS ((void));
-
-static void wiggler_detach PARAMS ((char *args, int from_tty));
-
static void wiggler_interrupt PARAMS ((int signo));
static void wiggler_interrupt_twice PARAMS ((int signo));
@@ -170,11 +64,11 @@ static void interrupt_query PARAMS ((void));
static unsigned char * do_command PARAMS ((int cmd, int *statusp, int *lenp));
-static unsigned char * read_bdm_registers PARAMS ((int first_bdm_regno,
- int last_bdm_regno,
- int *numregs));
+static void wiggler_put_packet PARAMS ((unsigned char *packet, int pktlen));
+
+static unsigned char * wiggler_get_packet PARAMS ((int cmd, int *pktlen, int timeout));
-extern struct target_ops wiggler_ops; /* Forward decl */
+static struct target_ops *current_ops = NULL;
static int last_run_status;
@@ -190,9 +84,9 @@ extern int remote_timeout;
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
wiggler_open knows that we don't have a file open when the program
starts. */
-serial_t wiggler_desc = NULL;
+static serial_t wiggler_desc = NULL;
-static void
+void
wiggler_error (s, error_code)
char *s;
int error_code;
@@ -228,7 +122,7 @@ wiggler_error (s, error_code)
/* Return nonzero if the thread TH is still alive on the remote system. */
-static int
+int
wiggler_thread_alive (th)
int th;
{
@@ -238,7 +132,7 @@ wiggler_thread_alive (th)
/* Clean up connection to a remote debugger. */
/* ARGSUSED */
-static void
+void
wiggler_close (quitting)
int quitting;
{
@@ -258,6 +152,9 @@ wiggler_start_remote (dummy)
int status;
int error_code;
int speed;
+ enum wiggler_target_type target_type;
+
+ target_type = (enum wiggler_target_type)dummy;
immediate_quit = 1; /* Allow user to interrupt it */
@@ -276,9 +173,9 @@ wiggler_start_remote (dummy)
buf[0] = WIGGLER_INIT;
buf[1] = speed >> 8;
buf[2] = speed & 0xff;
- buf[3] = 0; /* CPU32 for now */
- put_packet (buf, 4); /* Init Wiggler params */
- p = get_packet (buf[0], &pktlen, remote_timeout);
+ buf[3] = target_type;
+ wiggler_put_packet (buf, 4); /* Init Wiggler params */
+ p = wiggler_get_packet (buf[0], &pktlen, remote_timeout);
if (pktlen < 2)
error ("Truncated response packet from Wiggler");
@@ -306,9 +203,9 @@ wiggler_start_remote (dummy)
buf[0] = WIGGLER_SET_CTL_FLAGS;
buf[1] = 0;
buf[2] = 1; /* Asynchronously return status when target stops */
- put_packet (buf, 3);
+ wiggler_put_packet (buf, 3);
- p = get_packet (buf[0], &pktlen, remote_timeout);
+ p = wiggler_get_packet (buf[0], &pktlen, remote_timeout);
if (pktlen < 2)
error ("Truncated response packet from Wiggler");
@@ -342,10 +239,12 @@ wiggler_start_remote (dummy)
static DCACHE *wiggler_dcache;
-static void
-wiggler_open (name, from_tty)
+void
+wiggler_open (name, from_tty, target_type, ops)
char *name;
int from_tty;
+ enum wiggler_target_type target_type;
+ struct target_ops *ops;
{
if (name == 0)
error ("To open a Wiggler connection, you need to specify what serial\n\
@@ -353,7 +252,9 @@ device the Wiggler is attached to (e.g. /dev/ttya).");
target_preopen (from_tty);
- unpush_target (&wiggler_ops);
+ current_ops = ops;
+
+ unpush_target (current_ops);
wiggler_dcache = dcache_init (wiggler_read_bytes, wiggler_write_bytes);
@@ -382,7 +283,7 @@ device the Wiggler is attached to (e.g. /dev/ttya).");
puts_filtered (name);
puts_filtered ("\n");
}
- push_target (&wiggler_ops); /* Switch to using remote target now */
+ push_target (current_ops); /* Switch to using remote target now */
/* Without this, some commands which require an active target (such as kill)
won't work. This variable serves (at least) double duty as both the pid
@@ -395,7 +296,7 @@ device the Wiggler is attached to (e.g. /dev/ttya).");
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
- if (!catch_errors (wiggler_start_remote, (char *)0,
+ if (!catch_errors (wiggler_start_remote, (char *)target_type,
"Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
pop_target();
}
@@ -405,7 +306,7 @@ device the Wiggler is attached to (e.g. /dev/ttya).");
better not have left any breakpoints in the target program or it'll
die when it hits one. */
-static void
+void
wiggler_detach (args, from_tty)
char *args;
int from_tty;
@@ -420,7 +321,7 @@ wiggler_detach (args, from_tty)
/* Tell the remote machine to resume. */
-static void
+void
wiggler_resume (pid, step, siggnal)
int pid, step;
enum target_signal siggnal;
@@ -435,7 +336,7 @@ wiggler_resume (pid, step, siggnal)
do_command (WIGGLER_RUN, &last_run_status, &pktlen);
}
-static void
+void
wiggler_stop ()
{
int status;
@@ -467,7 +368,7 @@ wiggler_interrupt (signo)
wiggler_stop ();
buf[0] = WIGGLER_AYT;
- put_packet (buf, 1);
+ wiggler_put_packet (buf, 1);
wiggler_interrupt_flag = 1;
}
}
@@ -511,10 +412,8 @@ static int kill_kludge;
Returns "pid" (though it's not clear what, if anything, that
means in the case of this target). */
-static int
-wiggler_wait (pid, target_status)
- int pid;
- struct target_waitstatus *target_status;
+int
+wiggler_wait ()
{
unsigned char *p;
int error_code, status;
@@ -522,16 +421,13 @@ wiggler_wait (pid, target_status)
wiggler_interrupt_flag = 0;
- target_status->kind = TARGET_WAITKIND_STOPPED;
- target_status->value.sig = TARGET_SIGNAL_TRAP;
-
/* Target may already be stopped by the time we get here. */
if (!(last_run_status & WIGGLER_FLAG_BDM))
{
ofunc = (void (*)()) signal (SIGINT, wiggler_interrupt);
- p = get_packet (WIGGLER_AYT, &pktlen, -1);
+ p = wiggler_get_packet (WIGGLER_AYT, &pktlen, -1);
signal (SIGINT, ofunc);
@@ -551,46 +447,23 @@ wiggler_wait (pid, target_status)
if (!(status & WIGGLER_FLAG_BDM))
error ("Wiggler woke up, but wasn't stopped: 0x%x", status);
-
- if (wiggler_interrupt_flag)
- target_status->value.sig = TARGET_SIGNAL_INT;
- }
-
- /* This test figures out if we just executed a BGND insn, and if it's one of
- our breakpoints. If so, then we back up PC. N.B. When a BGND insn is
- executed, the PC points at the loc just after the insn (ie: it's always
- two bytes *after* the BGND). So, it's not sufficient to just see if PC-2
- is a BGND insn because we could have gotten there via a jump. We dis-
- ambiguate this case by examining the ATEMP register (which is only
- accessible from BDM). This will tell us if we entered BDM because we
- executed a BGND insn. */
-
- if (breakpoint_inserted_here_p (read_pc () - 2)) /* One of our breakpoints? */
- { /* Yes, see if we actually executed it */
-#if 0 /* Temporarily disabled until atemp reading is fixed. */
- int atemp;
- int numregs;
-
- p = read_bdm_registers (23, 23, &numregs);
- atemp = extract_unsigned_integer (p, 4);
-
- if (atemp == 1) /* And, did we hit a breakpoint insn? */
-#endif
- write_pc (read_pc () - 2); /* Yes, then back up PC */
}
- return inferior_pid;
+ if (wiggler_interrupt_flag)
+ return 1;
+ else
+ return 0;
}
-/* Read the remote registers into the block REGS. */
-/* Currently we just read all the registers, so we don't use regno. */
-/* ARGSUSED */
+/* Read registers from the Wiggler. Specify the starting and ending register
+ number. Return the number of regs actually read in *NUMREGS. Returns a
+ pointer to a static array containing the register contents. */
-static unsigned char *
-read_bdm_registers (first_bdm_regno, last_bdm_regno, numregs)
+unsigned char *
+wiggler_read_bdm_registers (first_bdm_regno, last_bdm_regno, reglen)
int first_bdm_regno;
int last_bdm_regno;
- int *numregs;
+ int *reglen;
{
unsigned char buf[10];
int i;
@@ -605,11 +478,8 @@ read_bdm_registers (first_bdm_regno, last_bdm_regno, numregs)
buf[3] = last_bdm_regno >> 8;
buf[4] = last_bdm_regno & 0xff;
- put_packet (buf, 5);
- p = get_packet (WIGGLER_READ_REGS, &pktlen, remote_timeout);
-
- if (pktlen < 5)
- error ("Truncated response packet from Wiggler");
+ wiggler_put_packet (buf, 5);
+ p = wiggler_get_packet (WIGGLER_READ_REGS, &pktlen, remote_timeout);
status = p[1];
error_code = p[2];
@@ -625,184 +495,76 @@ read_bdm_registers (first_bdm_regno, last_bdm_regno, numregs)
|| ((i & 3) != 0))
error ("Register block size bad: %d", i);
- *numregs = i / 4;
+ *reglen = i;
regs = p + 4;
return regs;
}
-static void
-dump_all_bdm_regs ()
-{
- unsigned char *regs;
- int numregs;
- int i;
-
- regs = read_bdm_registers (0, BDM_NUM_REGS - 1, &numregs);
-
- printf_unfiltered ("rpc = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("usp = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("ssp = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("vbr = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("sr = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("sfc = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("dfc = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("atemp = 0x%x ",
- (int)extract_unsigned_integer (regs, 4));
- regs += 4;
- printf_unfiltered ("\n");
-
- for (i = 0; i <= 7; i++)
- printf_unfiltered ("d%i = 0x%x ", i,
- (int)extract_unsigned_integer (regs + i * 4, 4));
- regs += 8 * 4;
- printf_unfiltered ("\n");
-
- for (i = 0; i <= 7; i++)
- printf_unfiltered ("a%i = 0x%x ", i,
- (int)extract_unsigned_integer (regs + i * 4, 4));
- printf_unfiltered ("\n");
-}
-
-static int bdm_regmap[] = {BDM_REGMAP};
+/* Read register BDM_REGNO and returns its value ala read_register() */
-/* Read the remote registers into the block REGS. */
-/* Currently we just read all the registers, so we don't use regno. */
-/* ARGSUSED */
-static void
-wiggler_fetch_registers (regno)
- int regno;
+CORE_ADDR
+wiggler_read_bdm_register (bdm_regno)
+ int bdm_regno;
{
- int i;
- unsigned char *regs;
- int first_regno, last_regno;
- int first_bdm_regno, last_bdm_regno;
- int numregs;
-
- if (regno == -1)
- {
- first_regno = 0;
- last_regno = NUM_REGS - 1;
-
- first_bdm_regno = 0;
- last_bdm_regno = BDM_NUM_REGS - 1;
- }
- else
- {
- first_regno = regno;
- last_regno = regno;
-
- first_bdm_regno = bdm_regmap [regno];
- last_bdm_regno = bdm_regmap [regno];
- }
-
- if (first_bdm_regno == -1)
- {
- supply_register (first_regno, NULL);
- return; /* Unsupported register */
- }
-
- regs = read_bdm_registers (first_bdm_regno, last_bdm_regno, &numregs);
-
- for (i = first_regno; i <= last_regno; i++)
- {
- int bdm_regno, regoffset;
-
- bdm_regno = bdm_regmap [i];
- if (bdm_regno != -1)
- {
- regoffset = bdm_regno - first_bdm_regno;
-
- if (regoffset >= numregs)
- continue;
+ int reglen;
+ unsigned char *p;
+ CORE_ADDR regval;
- supply_register (i, regs + 4 * regoffset);
- }
- else
- supply_register (i, NULL); /* Unsupported register */
- }
-}
+ p = wiggler_read_bdm_registers (bdm_regno, bdm_regno, &reglen);
+ regval = extract_unsigned_integer (p, reglen);
-static void
-wiggler_prepare_to_store ()
-{
+ return regval;
}
-/* Store register REGNO, or all registers if REGNO == -1, from the contents
- of REGISTERS. FIXME: ignores errors. */
-
-static void
-wiggler_store_registers (regno)
- int regno;
+void
+wiggler_write_bdm_registers (first_bdm_regno, regptr, reglen)
+ int first_bdm_regno;
+ unsigned char *regptr;
+ int reglen;
{
- unsigned char buf[10 + 256];
- int i;
+ unsigned char *buf;
unsigned char *p;
int error_code, status;
int pktlen;
- int first_regno, last_regno;
- int first_bdm_regno, last_bdm_regno;
-
- if (regno == -1)
- {
- first_regno = 0;
- last_regno = NUM_REGS - 1;
-
- first_bdm_regno = 0;
- last_bdm_regno = BDM_NUM_REGS - 1;
- }
- else
- {
- first_regno = regno;
- last_regno = regno;
- first_bdm_regno = bdm_regmap [regno];
- last_bdm_regno = bdm_regmap [regno];
- }
-
- if (first_bdm_regno == -1)
- return; /* Unsupported register */
+ buf = alloca (4 + reglen);
buf[0] = WIGGLER_WRITE_REGS;
- buf[3] = 4;
+ buf[1] = first_bdm_regno >> 8;
+ buf[2] = first_bdm_regno & 0xff;
+ buf[3] = reglen;
+ memcpy (buf + 4, regptr, reglen);
- for (i = first_regno; i <= last_regno; i++)
- {
- int bdm_regno;
+ wiggler_put_packet (buf, 4 + reglen);
+ p = wiggler_get_packet (WIGGLER_WRITE_REGS, &pktlen, remote_timeout);
- bdm_regno = bdm_regmap [i];
+ if (pktlen < 3)
+ error ("Truncated response packet from Wiggler");
- buf[1] = bdm_regno >> 8;
- buf[2] = bdm_regno & 0xff;
+ status = p[1];
+ error_code = p[2];
- memcpy (&buf[4], &registers[REGISTER_BYTE (i)], 4);
- put_packet (buf, 4 + 4);
- p = get_packet (WIGGLER_WRITE_REGS, &pktlen, remote_timeout);
+ if (error_code != 0)
+ wiggler_error ("wiggler_write_bdm_registers:", error_code);
+}
- if (pktlen < 3)
- error ("Truncated response packet from Wiggler");
+void
+wiggler_write_bdm_register (bdm_regno, reg)
+ int bdm_regno;
+ CORE_ADDR reg;
+{
+ unsigned char buf[4];
- status = p[1];
- error_code = p[2];
+ store_unsigned_integer (buf, 4, reg);
- if (error_code != 0)
- wiggler_error ("wiggler_store_registers:", error_code);
- }
+ wiggler_write_bdm_registers (bdm_regno, buf, 4);
+}
+
+void
+wiggler_prepare_to_store ()
+{
}
/* Write memory data directly to the remote machine.
@@ -813,6 +575,8 @@ wiggler_store_registers (regno)
Returns number of bytes transferred, or 0 for error. */
+static int write_mem_command = WIGGLER_WRITE_MEM;
+
static int
wiggler_write_bytes (memaddr, myaddr, len)
CORE_ADDR memaddr;
@@ -825,7 +589,7 @@ wiggler_write_bytes (memaddr, myaddr, len)
origlen = len;
- buf[0] = WIGGLER_WRITE_MEM;
+ buf[0] = write_mem_command;
buf[5] = 1; /* Write as bytes */
buf[6] = 0; /* Don't verify */
@@ -845,8 +609,8 @@ wiggler_write_bytes (memaddr, myaddr, len)
buf[7] = numbytes;
memcpy (&buf[8], myaddr, numbytes);
- put_packet (buf, 8 + numbytes);
- p = get_packet (WIGGLER_WRITE_MEM, &pktlen, remote_timeout);
+ wiggler_put_packet (buf, 8 + numbytes);
+ p = wiggler_get_packet (WIGGLER_WRITE_MEM, &pktlen, remote_timeout);
if (pktlen < 3)
error ("Truncated response packet from Wiggler");
@@ -918,8 +682,8 @@ wiggler_read_bytes (memaddr, myaddr, len)
buf[6] = numbytes;
- put_packet (buf, 7);
- p = get_packet (WIGGLER_READ_MEM, &pktlen, remote_timeout);
+ wiggler_put_packet (buf, 7);
+ p = wiggler_get_packet (WIGGLER_READ_MEM, &pktlen, remote_timeout);
if (pktlen < 4)
error ("Truncated response packet from Wiggler");
@@ -960,7 +724,7 @@ wiggler_read_bytes (memaddr, myaddr, len)
nonzero. Returns length of data written or read; 0 for error. */
/* ARGSUSED */
-static int
+int
wiggler_xfer_memory (memaddr, myaddr, len, should_write, target)
CORE_ADDR memaddr;
char *myaddr;
@@ -971,7 +735,7 @@ wiggler_xfer_memory (memaddr, myaddr, len, should_write, target)
return dcache_xfer_memory (wiggler_dcache, memaddr, myaddr, len, should_write);
}
-static void
+void
wiggler_files_info (ignore)
struct target_ops *ignore;
{
@@ -1123,7 +887,7 @@ stu_put_packet (buf, len)
*/
static void
-put_packet (buf, len)
+wiggler_put_packet (buf, len)
unsigned char *buf;
int len;
{
@@ -1225,7 +989,7 @@ stu_get_packet (cmd, lenp, timeout)
*/
static unsigned char *
-get_packet (cmd, lenp, timeout)
+wiggler_get_packet (cmd, lenp, timeout)
int cmd;
int *lenp;
{
@@ -1241,7 +1005,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
if (ch != 0x55)
goto find_packet;
@@ -1256,7 +1020,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
*packet_ptr++ = ch;
checksum += ch;
@@ -1266,7 +1030,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
*packet_ptr++ = ch;
checksum += ch;
@@ -1275,7 +1039,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
*packet_ptr++ = ch;
checksum += ch;
@@ -1291,6 +1055,7 @@ get_packet (cmd, lenp, timeout)
break;
default: /* Error w/no params */
len = 0;
+ break;
case 0x0: /* Normal result */
switch (packet[0])
{
@@ -1320,7 +1085,7 @@ get_packet (cmd, lenp, timeout)
len = 0;
break;
case WIGGLER_GET_VERSION: /* Get Version */
- len = 4;
+ len = 10;
break;
case WIGGLER_GET_STATUS_MASK: /* Get Status Mask */
len = 1;
@@ -1342,7 +1107,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
*packet_ptr++ = ch;
checksum += ch;
len = ch;
@@ -1355,7 +1120,7 @@ get_packet (cmd, lenp, timeout)
ch = readchar (timeout);
if (ch < 0)
- error ("get_packet (readchar): %d", ch);
+ error ("wiggler_get_packet (readchar): %d", ch);
*packet_ptr++ = ch;
checksum += ch;
}
@@ -1385,8 +1150,8 @@ do_command (cmd, statusp, lenp)
char errbuf[100];
buf[0] = cmd;
- put_packet (buf, 1); /* Send command */
- p = get_packet (*buf, lenp, remote_timeout);
+ wiggler_put_packet (buf, 1); /* Send command */
+ p = wiggler_get_packet (*buf, lenp, remote_timeout);
if (*lenp < 3)
error ("Truncated response packet from Wiggler");
@@ -1410,7 +1175,7 @@ do_command (cmd, statusp, lenp)
return p + 3;
}
-static void
+void
wiggler_kill ()
{
/* For some mysterious reason, wait_for_inferior calls kill instead of
@@ -1427,17 +1192,17 @@ wiggler_kill ()
target_mourn_inferior ();
}
-static void
+void
wiggler_mourn ()
{
- unpush_target (&wiggler_ops);
+ unpush_target (current_ops);
generic_mourn_inferior ();
}
/* All we actually do is set the PC to the start address of exec_bfd, and start
the program at that point. */
-static void
+void
wiggler_create_inferior (exec_file, args, env)
char *exec_file;
char *args;
@@ -1450,7 +1215,7 @@ wiggler_create_inferior (exec_file, args, env)
proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
}
-static void
+void
wiggler_load (args, from_tty)
char *args;
int from_tty;
@@ -1526,58 +1291,13 @@ bdm_restart_command (args, from_tty)
normal_stop ();
}
-static int
-flash_xfer_memory (memaddr, myaddr, len, should_write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int should_write;
- struct target_ops *target; /* ignored */
-{
- char buf[256 + 10];
- unsigned char *p;
- int origlen;
-
- if (!should_write)
- abort ();
-
- origlen = len;
-
- buf[0] = WIGGLER_PROGRAM_FLASH;
-
- while (len > 0)
- {
- int numbytes;
- int pktlen;
- int status, error_code;
-
- numbytes = min (len, 256 - 6);
-
- buf[1] = memaddr >> 24;
- buf[2] = memaddr >> 16;
- buf[3] = memaddr >> 8;
- buf[4] = memaddr;
-
- buf[5] = numbytes;
-
- memcpy (&buf[6], myaddr, numbytes);
- put_packet (buf, 6 + numbytes);
- p = get_packet (WIGGLER_PROGRAM_FLASH, &pktlen, remote_timeout);
- if (pktlen < 3)
- error ("Truncated response packet from Wiggler");
-
- status = p[1];
- error_code = p[2];
-
- if (error_code != 0)
- wiggler_error ("flash_xfer_memory:", error_code);
-
- len -= numbytes;
- memaddr += numbytes;
- myaddr += numbytes;
- }
+/* Temporary replacement for target_store_registers(). This prevents
+ generic_load from trying to set the PC. */
- return origlen - len;
+static void
+noop_store_registers (regno)
+ int regno;
+{
}
static void
@@ -1587,6 +1307,7 @@ bdm_update_flash_command (args, from_tty)
{
int status, pktlen;
struct cleanup *old_chain;
+ void (*store_registers_tmp) PARAMS ((int));
if (!wiggler_desc)
error ("Not connected to wiggler.");
@@ -1600,70 +1321,41 @@ bdm_update_flash_command (args, from_tty)
do_command (WIGGLER_ERASE_FLASH, &status, &pktlen);
- wiggler_ops.to_xfer_memory = flash_xfer_memory;
+ write_mem_command = WIGGLER_PROGRAM_FLASH;
+ store_registers_tmp = current_target.to_store_registers;
+ current_target.to_store_registers = noop_store_registers;
generic_load (args, from_tty);
- wiggler_ops.to_xfer_memory = wiggler_xfer_memory;
+ current_target.to_store_registers = store_registers_tmp;
+ write_mem_command = WIGGLER_WRITE_MEM;
do_command (WIGGLER_EXIT_MON, &status, &pktlen);
/* discard_cleanups (old_chain);*/
}
-
-/* Define the target subroutine names */
-
-struct target_ops wiggler_ops = {
- "wiggler", /* to_shortname */
- "", /* to_longname */
- "", /* to_doc */
- wiggler_open, /* to_open */
- wiggler_close, /* to_close */
- NULL, /* to_attach */
- wiggler_detach, /* to_detach */
- wiggler_resume, /* to_resume */
- wiggler_wait, /* to_wait */
- wiggler_fetch_registers, /* to_fetch_registers */
- wiggler_store_registers, /* to_store_registers */
- wiggler_prepare_to_store, /* to_prepare_to_store */
- wiggler_xfer_memory, /* to_xfer_memory */
- wiggler_files_info, /* to_files_info */
- wiggler_insert_breakpoint, /* to_insert_breakpoint */
- memory_remove_breakpoint, /* to_remove_breakpoint */
- NULL, /* to_terminal_init */
- NULL, /* to_terminal_inferior */
- NULL, /* to_terminal_ours_for_output */
- NULL, /* to_terminal_ours */
- NULL, /* to_terminal_info */
- wiggler_kill, /* to_kill */
- wiggler_load, /* to_load */
- NULL, /* to_lookup_symbol */
- wiggler_create_inferior, /* to_create_inferior */
- wiggler_mourn, /* to_mourn_inferior */
- 0, /* to_can_run */
- 0, /* to_notice_signals */
- wiggler_thread_alive, /* to_thread_alive */
- 0, /* to_stop */
- process_stratum, /* to_stratum */
- NULL, /* to_next */
- 1, /* to_has_all_memory */
- 1, /* to_has_memory */
- 1, /* to_has_stack */
- 1, /* to_has_registers */
- 1, /* to_has_execution */
- NULL, /* sections */
- NULL, /* sections_end */
- OPS_MAGIC /* to_magic */
-};
+static void
+bdm_read_register_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ /* XXX repeat should go on to the next register */
+
+ if (!wiggler_desc)
+ error ("Not connected to wiggler.");
+
+ if (!args)
+ error ("Must specify BDM register number.");
+
+}
+
void
_initialize_remote_wiggler ()
{
extern struct cmd_list_element *cmdlist;
static struct cmd_list_element *bdm_cmd_list = NULL;
- add_target (&wiggler_ops);
-
add_show_from_set (add_set_cmd ("remotetimeout", no_class,
var_integer, (char *)&remote_timeout,
"Set timeout value for remote read.\n", &setlist),
@@ -1675,4 +1367,5 @@ _initialize_remote_wiggler ()
add_cmd ("reset", class_obscure, bdm_reset_command, "", &bdm_cmd_list);
add_cmd ("restart", class_obscure, bdm_restart_command, "", &bdm_cmd_list);
add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &bdm_cmd_list);
+ /* add_cmd ("read-register", class_obscure, bdm_read_register_command, "", &bdm_cmd_list);*/
}
diff --git a/gdb/ocd.h b/gdb/ocd.h
new file mode 100644
index 0000000..a8e0494
--- /dev/null
+++ b/gdb/ocd.h
@@ -0,0 +1,132 @@
+/* Definitions for the Macraigor Systems BDM Wiggler
+ Copyright 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#ifndef WIGGLER_H
+#define WIGGLER_H
+
+/* Wiggler serial protocol definitions */
+
+#define DLE 020 /* Quote char */
+#define SYN 026 /* Start of packet */
+#define RAW_SYN ((026 << 8) | 026) /* get_quoted_char found a naked SYN */
+
+/* Status flags */
+
+#define WIGGLER_FLAG_RESET 0x01 /* Target is being reset */
+#define WIGGLER_FLAG_STOPPED 0x02 /* Target is halted */
+#define WIGGLER_FLAG_BDM 0x04 /* Target is in BDM */
+#define WIGGLER_FLAG_PWF 0x08 /* Power failed */
+#define WIGGLER_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
+
+/* Commands */
+
+#define WIGGLER_AYT 0x0 /* Are you there? */
+#define WIGGLER_GET_VERSION 0x1 /* Get Version */
+#define WIGGLER_SET_BAUD_RATE 0x2 /* Set Baud Rate */
+#define WIGGLER_INIT 0x10 /* Initialize Wiggler */
+#define WIGGLER_SET_SPEED 0x11 /* Set Speed */
+#define WIGGLER_GET_STATUS_MASK 0x12 /* Get Status Mask */
+#define WIGGLER_GET_CTRS 0x13 /* Get Error Counters */
+#define WIGGLER_SET_FUNC_CODE 0x14 /* Set Function Code */
+#define WIGGLER_SET_CTL_FLAGS 0x15 /* Set Control Flags */
+#define WIGGLER_SET_BUF_ADDR 0x16 /* Set Register Buffer Address */
+#define WIGGLER_RUN 0x20 /* Run Target from PC */
+#define WIGGLER_RUN_ADDR 0x21 /* Run Target from Specified Address */
+#define WIGGLER_STOP 0x22 /* Stop Target */
+#define WIGGLER_RESET_RUN 0x23 /* Reset Target and Run */
+#define WIGGLER_RESET 0x24 /* Reset Target and Halt */
+#define WIGGLER_STEP 0x25 /* Single step */
+#define WIGGLER_READ_REGS 0x30 /* Read Registers */
+#define WIGGLER_WRITE_REGS 0x31 /* Write Registers */
+#define WIGGLER_READ_MEM 0x32 /* Read Memory */
+#define WIGGLER_WRITE_MEM 0x33 /* Write Memory */
+#define WIGGLER_FILL_MEM 0x34 /* Fill Memory */
+#define WIGGLER_MOVE_MEM 0x35 /* Move Memory */
+
+#define WIGGLER_READ_INT_MEM 0x80 /* Read Internal Memory */
+#define WIGGLER_WRITE_INT_MEM 0x81 /* Write Internal Memory */
+#define WIGGLER_JUMP 0x82 /* Jump to Subroutine */
+
+#define WIGGLER_ERASE_FLASH 0x90 /* Erase flash memory */
+#define WIGGLER_PROGRAM_FLASH 0x91 /* Write flash memory */
+#define WIGGLER_EXIT_MON 0x93 /* Exit the flash programming monitor */
+#define WIGGLER_ENTER_MON 0x94 /* Enter the flash programming monitor */
+
+#define WIGGLER_SET_STATUS 0x0a /* Set status */
+#define WIGGLER_FLAG_STOP 0x0 /* Stop the target, enter BDM */
+#define WIGGLER_FLAG_START 0x01 /* Start the target at PC */
+#define WIGGLER_FLAG_RETURN_STATUS 0x04 /* Return async status */
+
+/* Target type (for WIGGLER_INIT command) */
+
+enum wiggler_target_type {
+ WIGGLER_TARGET_CPU32=0x0, /* Moto cpu32 family */
+ WIGGLER_TARGET_CPU16=0x1,
+ WIGGLER_TARGET_MOTO_PPC=0x2, /* Motorola PPC 5xx/8xx */
+ WIGGLER_TARGET_IBM_PPC=0x3}; /* IBM PPC 4xx */
+
+void wiggler_open PARAMS ((char *name, int from_tty, enum wiggler_target_type,
+ struct target_ops *ops));
+
+void wiggler_close PARAMS ((int quitting));
+
+void wiggler_detach PARAMS ((char *args, int from_tty));
+
+void wiggler_resume PARAMS ((int pid, int step, enum target_signal siggnal));
+
+void wiggler_prepare_to_store PARAMS ((void));
+
+void wiggler_stop PARAMS ((void));
+
+void wiggler_files_info PARAMS ((struct target_ops *ignore));
+
+
+int wiggler_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len, int should_write,
+ struct target_ops *target));
+
+void wiggler_mourn PARAMS ((void));
+
+void wiggler_create_inferior PARAMS ((char *exec_file,
+ char *args,
+ char **env));
+
+int wiggler_thread_alive PARAMS ((int th));
+
+void wiggler_error PARAMS ((char *s, int error_code));
+
+void wiggler_kill PARAMS ((void));
+
+void wiggler_load PARAMS((char *args, int from_tty));
+
+unsigned char * wiggler_read_bdm_registers PARAMS ((int first_bdm_regno,
+ int last_bdm_regno,
+ int *reglen));
+
+CORE_ADDR wiggler_read_bdm_register PARAMS ((int bdm_regno));
+
+void wiggler_write_bdm_registers PARAMS ((int first_bdm_regno,
+ unsigned char *regptr,
+ int reglen));
+
+void wiggler_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));
+
+int wiggler_wait PARAMS ((void));
+
+#endif /* WIGGLER_H */
diff --git a/gdb/ppc-bdm.c b/gdb/ppc-bdm.c
new file mode 100644
index 0000000..6181298
--- /dev/null
+++ b/gdb/ppc-bdm.c
@@ -0,0 +1,260 @@
+/* Remote target communications for the Macraigor Systems BDM Wiggler
+ talking to a Motorola PPC 505.
+ Copyright 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include <sys/types.h>
+#include <signal.h>
+#include "serial.h"
+#include "ocd.h"
+
+static void bdm_ppc_open PARAMS ((char *name, int from_tty));
+
+static int bdm_ppc_wait PARAMS ((int pid,
+ struct target_waitstatus *target_status));
+
+static void bdm_ppc_fetch_registers PARAMS ((int regno));
+
+static void bdm_ppc_store_registers PARAMS ((int regno));
+
+extern struct target_ops bdm_ppc_ops; /* Forward decl */
+
+/* Open a connection to a remote debugger.
+ NAME is the filename used for communication. */
+
+static void
+bdm_ppc_open (name, from_tty)
+ char *name;
+ int from_tty;
+{
+ wiggler_open (name, from_tty, WIGGLER_TARGET_MOTO_PPC, &bdm_ppc_ops);
+}
+
+/* Wait until the remote machine stops, then return,
+ storing status in STATUS just as `wait' would.
+ Returns "pid" (though it's not clear what, if anything, that
+ means in the case of this target). */
+
+static int
+bdm_ppc_wait (pid, target_status)
+ int pid;
+ struct target_waitstatus *target_status;
+{
+ int stop_reason;
+
+ target_status->kind = TARGET_WAITKIND_STOPPED;
+
+ stop_reason = wiggler_wait ();
+
+ if (stop_reason)
+ {
+ target_status->value.sig = TARGET_SIGNAL_INT;
+ return inferior_pid;
+ }
+
+ target_status->value.sig = TARGET_SIGNAL_TRAP; /* XXX for now */
+
+ {
+ unsigned long ecr, der;
+
+ ecr = wiggler_read_bdm_register (148); /* Read the exception cause register */
+ der = wiggler_read_bdm_register (149); /* Read the debug enables register */
+ fprintf_unfiltered (gdb_stdout, "ecr = 0x%x, der = 0x%x\n", ecr, der);
+ }
+
+ return inferior_pid;
+}
+
+static int bdm_regmap[] = {BDM_REGMAP};
+
+/* Read the remote registers into regs.
+
+ The Wiggler uses the following codes to access the registers:
+
+ 0 -> 1023 SPR 0 -> 1023
+ 0 - SPR 0 - MQ
+ 1 - SPR 1 - XER
+ 8 - SPR 8 - LR
+ 9 - SPR 9 - CTR (known as cnt in GDB)
+ 26 - SPR 26 - SRR0 - pc
+ 1024 -> 2047 DCR 0 -> DCR 1023 (IBM PPC 4xx only)
+ 2048 -> 2079 R0 -> R31
+ 2080 -> 2143 FP0 -> FP31 (64 bit regs)
+ 2144 CR (known as cnd in GDB)
+ 2145 FPCSR
+ 2146 MSR (known as ps in GDB)
+ */
+
+static void
+bdm_ppc_fetch_registers (regno)
+ int regno;
+{
+ int i;
+ unsigned char *regs;
+ int first_regno, last_regno;
+ int first_bdm_regno, last_bdm_regno;
+ int reglen;
+
+ if (regno == -1)
+ {
+ first_regno = 0;
+ last_regno = NUM_REGS - 1;
+
+ first_bdm_regno = 0;
+ last_bdm_regno = BDM_NUM_REGS - 1;
+ }
+ else
+ {
+ first_regno = regno;
+ last_regno = regno;
+
+ first_bdm_regno = bdm_regmap [regno];
+ last_bdm_regno = bdm_regmap [regno];
+ }
+
+ if (first_bdm_regno == -1)
+ {
+ supply_register (first_regno, NULL);
+ return; /* Unsupported register */
+ }
+
+ regs = wiggler_read_bdm_registers (first_bdm_regno, last_bdm_regno, &reglen);
+
+ for (i = first_regno; i <= last_regno; i++)
+ {
+ int bdm_regno, regoffset;
+
+ bdm_regno = bdm_regmap [i];
+ if (bdm_regno != -1)
+ {
+ regoffset = bdm_regno - first_bdm_regno;
+
+ if (regoffset >= reglen / 4)
+ continue;
+
+ supply_register (i, regs + 4 * regoffset);
+ }
+ else
+ supply_register (i, NULL); /* Unsupported register */
+ }
+}
+
+/* Store register REGNO, or all registers if REGNO == -1, from the contents
+ of REGISTERS. FIXME: ignores errors. */
+
+static void
+bdm_ppc_store_registers (regno)
+ int regno;
+{
+ int i;
+ int first_regno, last_regno;
+ int first_bdm_regno, last_bdm_regno;
+
+ if (regno == -1)
+ {
+ first_regno = 0;
+ last_regno = NUM_REGS - 1;
+
+ first_bdm_regno = 0;
+ last_bdm_regno = BDM_NUM_REGS - 1;
+ }
+ else
+ {
+ first_regno = regno;
+ last_regno = regno;
+
+ first_bdm_regno = bdm_regmap [regno];
+ last_bdm_regno = bdm_regmap [regno];
+ }
+
+ if (first_bdm_regno == -1)
+ return; /* Unsupported register */
+
+ for (i = first_regno; i <= last_regno; i++)
+ {
+ int bdm_regno;
+
+ bdm_regno = bdm_regmap [i];
+
+ wiggler_write_bdm_registers (bdm_regno, registers + REGISTER_BYTE (i), 4);
+ }
+}
+
+/* Define the target subroutine names */
+
+struct target_ops bdm_ppc_ops = {
+ "wiggler", /* to_shortname */
+ "", /* to_longname */
+ "", /* to_doc */
+ bdm_ppc_open, /* to_open */
+ wiggler_close, /* to_close */
+ NULL, /* to_attach */
+ wiggler_detach, /* to_detach */
+ wiggler_resume, /* to_resume */
+ bdm_ppc_wait, /* to_wait */
+ bdm_ppc_fetch_registers, /* to_fetch_registers */
+ bdm_ppc_store_registers, /* to_store_registers */
+ wiggler_prepare_to_store, /* to_prepare_to_store */
+ wiggler_xfer_memory, /* to_xfer_memory */
+ wiggler_files_info, /* to_files_info */
+ memory_insert_breakpoint, /* to_insert_breakpoint */
+ memory_remove_breakpoint, /* to_remove_breakpoint */
+ NULL, /* to_terminal_init */
+ NULL, /* to_terminal_inferior */
+ NULL, /* to_terminal_ours_for_output */
+ NULL, /* to_terminal_ours */
+ NULL, /* to_terminal_info */
+ wiggler_kill, /* to_kill */
+ wiggler_load, /* to_load */
+ NULL, /* to_lookup_symbol */
+ wiggler_create_inferior, /* to_create_inferior */
+ wiggler_mourn, /* to_mourn_inferior */
+ 0, /* to_can_run */
+ 0, /* to_notice_signals */
+ wiggler_thread_alive, /* to_thread_alive */
+ wiggler_stop, /* to_stop */
+ process_stratum, /* to_stratum */
+ NULL, /* to_next */
+ 1, /* to_has_all_memory */
+ 1, /* to_has_memory */
+ 1, /* to_has_stack */
+ 1, /* to_has_registers */
+ 1, /* to_has_execution */
+ NULL, /* sections */
+ NULL, /* sections_end */
+ OPS_MAGIC /* to_magic */
+};
+
+void
+_initialize_bdm_ppc ()
+{
+ add_target (&bdm_ppc_ops);
+}
diff --git a/gdb/ser-ocd.c b/gdb/ser-ocd.c
new file mode 100644
index 0000000..d3f1c8e
--- /dev/null
+++ b/gdb/ser-ocd.c
@@ -0,0 +1,174 @@
+/* Remote serial interface for Macraigor Systems implementation of
+ On-Chip Debugging using serial target box or serial wiggler
+
+ Copyright 1994, 1997 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+#include "serial.h"
+
+static int ser_ocd_open PARAMS ((serial_t scb, const char *name));
+static void ser_ocd_raw PARAMS ((serial_t scb));
+static int ser_ocd_readchar PARAMS ((serial_t scb, int timeout));
+static int ser_ocd_setbaudrate PARAMS ((serial_t scb, int rate));
+static int ser_ocd_write PARAMS ((serial_t scb, const char *str, int len));
+static void ser_ocd_close PARAMS ((serial_t scb));
+static serial_ttystate ser_ocd_get_tty_state PARAMS ((serial_t scb));
+static int ser_ocd_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+
+static int
+ocd_open (scb, name)
+ serial_t scb;
+ const char *name;
+{
+ return 0;
+}
+
+static int
+ocd_noop (scb)
+ serial_t scb;
+{
+ return 0;
+}
+
+static void
+ocd_raw (scb)
+ serial_t scb;
+{
+ /* Always in raw mode */
+}
+
+/* We need a buffer to store responses from the Wigglers.dll */
+char * from_wigglers_buffer;
+char * bptr; /* curr spot in buffer */
+
+static void
+ocd_readremote ()
+{
+}
+
+static int
+ocd_readchar (scb, timeout)
+ serial_t scb;
+ int timeout;
+{
+
+}
+
+struct ocd_ttystate {
+ int dummy;
+};
+
+/* ocd_{get set}_tty_state() are both dummys to fill out the function
+ vector. Someday, they may do something real... */
+
+static serial_ttystate
+ocd_get_tty_state (scb)
+ serial_t scb;
+{
+ struct ocd_ttystate *state;
+
+ state = (struct ocd_ttystate *) xmalloc (sizeof *state);
+
+ return (serial_ttystate) state;
+}
+
+static int
+ocd_set_tty_state (scb, ttystate)
+ serial_t scb;
+ serial_ttystate ttystate;
+{
+ return 0;
+}
+
+static int
+ocd_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+ serial_t scb;
+ serial_ttystate new_ttystate;
+ serial_ttystate old_ttystate;
+{
+ return 0;
+}
+
+static void
+ocd_print_tty_state (scb, ttystate)
+ serial_t scb;
+ serial_ttystate ttystate;
+{
+ /* Nothing to print. */
+ return;
+}
+
+static int
+ocd_setbaudrate (scb, rate)
+ serial_t scb;
+ int rate;
+{
+ return 0;
+}
+
+static int
+ocd_write (scb, str, len)
+ serial_t scb;
+ const char *str;
+ int len;
+{
+ char c;
+
+ ocd_readremote();
+
+#ifdef __CYGWIN32__
+ /* send packet to Wigglers.dll and store response so we can give it to
+ remote-wiggler.c when get_packet is run */
+ do_command (str, from_wigglers_buffer);
+#endif
+
+ return 0;
+}
+
+static void
+ocd_close (scb)
+ serial_t scb;
+{
+ wiggler_close (0);
+}
+
+static struct serial_ops ocd_ops =
+{
+ "ocd",
+ 0,
+ ocd_open,
+ ocd_close,
+ ocd_readchar,
+ ocd_write,
+ ocd_noop, /* flush output */
+ ocd_noop, /* flush input */
+ ocd_noop, /* send break -- currently used only for nindy */
+ ocd_raw,
+ ocd_get_tty_state,
+ ocd_set_tty_state,
+ ocd_print_tty_state,
+ ocd_noflush_set_tty_state,
+ ocd_setbaudrate,
+};
+
+void
+_initialize_ser_ocd_bdm ()
+{
+ serial_add_interface (&ocd_ops);
+}
diff --git a/gdb/wigglers.def b/gdb/wigglers.def
new file mode 100644
index 0000000..f29a100
--- /dev/null
+++ b/gdb/wigglers.def
@@ -0,0 +1,3 @@
+EXPORTS
+do_command
+test_command
generated by cgit v1.1 at 2024-12-17 01:58:40 +0000