diff options
Diffstat (limited to 'gdb/tm-sun386.h')
| -rw-r--r-- | gdb/tm-sun386.h | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/gdb/tm-sun386.h b/gdb/tm-sun386.h new file mode 100644 index 0000000..60c8986 --- /dev/null +++ b/gdb/tm-sun386.h @@ -0,0 +1,305 @@ +/* Parameters for execution on a Sun 386i, for GDB, the GNU debugger. + Copyright (C) 1986, 1987 Free Software Foundation, Inc. + +This file is part of GDB. + +GDB is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 1, or (at your option) +any later version. + +GDB is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GDB; see the file COPYING. If not, write to +the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +#ifndef sun386 +#define sun386 +#endif +#define SUNOS4 +#define USE_MACHINE_REG_H + +/* Perhaps some day this will work even without the following #define */ +#define COFF_ENCAPSULATE + +#ifdef COFF_ENCAPSULATE +#define NAMES_HAVE_UNDERSCORE +/* Avoid conflicts between "a.out.gnu.h" and <sys/exec.h> */ +#define _EXEC_ +#endif + +#define BROKEN_LARGE_ALLOCA + +/* sun386 ptrace seems unable to change the frame pointer */ +#define PTRACE_FP_BUG + +/* Debugger information will be in DBX format. */ + +#define READ_DBX_FORMAT + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(frompc) {(frompc) = i386_skip_prologue((frompc));} + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + (read_memory_integer (read_register (SP_REGNUM), 4)) + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0xfc000000 + +/* Stack grows downward. */ + +#define INNER_THAN < + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0xcc} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 1 + +/* Nonzero if instruction at PC is a return instruction. */ + +#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0xc3) + +/* Return 1 if P points to an invalid floating point value. + LEN is the length in bytes -- not relevant on the 386. */ + +#define INVALID_FLOAT(p, len) (0) + +/* Largest integer type */ +#define LONGEST long + +/* Name of the builtin type for the LONGEST type above. */ +#define BUILTIN_TYPE_LONGEST builtin_type_long + +/* Say how long (ordinary) registers are. */ + +#define REGISTER_TYPE long + +/* Number of machine registers */ + +#define NUM_REGS 35 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +/* the order of the first 8 registers must match the compiler's + * numbering scheme (which is the same as the 386 scheme) + * also, this table must match regmap in i386-pinsn.c. + */ +#define REGISTER_NAMES { "gs", "fs", "es", "ds", \ + "edi", "esi", "ebp", "esp", \ + "ebx", "edx", "ecx", "eax", \ + "retaddr", "trapnum", "errcode", "ip", \ + "cs", "ps", "sp", "ss", \ + "fst0", "fst1", "fst2", "fst3", \ + "fst4", "fst5", "fst6", "fst7", \ + "fctrl", "fstat", "ftag", "fip", \ + "fcs", "fopoff", "fopsel" \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define FP_REGNUM 6 /* Contains address of executing stack frame */ +#define SP_REGNUM 18 /* Contains address of top of stack */ +#define PS_REGNUM 17 /* Contains processor status */ +#define PC_REGNUM 15 /* Contains program counter */ +#define FP0_REGNUM 20 /* Floating point register 0 */ +#define FPC_REGNUM 28 /* 80387 control register */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (20*4+8*10+7*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) \ + ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 160 \ + : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 10) + 80 \ + : (N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 10 : 4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 8 : 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 10 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#define REGISTER_CONVERTIBLE(N) (((unsigned)((N) - FP0_REGNUM)) < 8) + +/* Convert data from raw format for register REGNUM + to virtual format for register REGNUM. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \ +{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \ + i387_to_double ((FROM), (TO)); \ + else \ + bcopy ((FROM), (TO), 4); } + +/* Convert data from virtual format for register REGNUM + to raw format for register REGNUM. */ + +#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \ +{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \ + double_to_i387 ((FROM), (TO)); \ + else \ + bcopy ((FROM), (TO), 4); } + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((unsigned)((N) - FP0_REGNUM)) < 8 ? builtin_type_double : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { (SP) -= sizeof (ADDR); \ + write_memory ((SP), &(ADDR), sizeof (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + bcopy (REGBUF + REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address + and produces the nominal address of the caller frame. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. + In that case, FRAME_CHAIN_COMBINE is not used. */ + +#define FRAME_CHAIN(thisframe) \ + (outside_startup_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +#define FRAME_CHAIN_VALID(chain, thisframe) \ + (chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe)))) + +#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ +{ (FRAMELESS) = frameless_look_for_prologue (FI); } + +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) (numargs) = i386_frame_num_args(fi) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); } + + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); } + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME { i386_pop_frame (); } + +/* this is + * call 11223344 (32 bit relative) + * int3 + */ + +#define CALL_DUMMY { 0x223344e8, 0xcc11 } + +#define CALL_DUMMY_LENGTH 8 + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + *(int *)((char *)(dummyname) + 1) = (int)(fun) - (pc) - 5; \ +} |