diff options
Diffstat (limited to 'gdb/tm-68k.h')
| -rw-r--r-- | gdb/tm-68k.h | 525 |
1 files changed, 0 insertions, 525 deletions
diff --git a/gdb/tm-68k.h b/gdb/tm-68k.h deleted file mode 100644 index 96d71de..0000000 --- a/gdb/tm-68k.h +++ /dev/null @@ -1,525 +0,0 @@ -/* Parameters for execution on a 68000 series machine. - Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc. - -This file is part of GDB. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - -/* Generic 68000 stuff, to be included by other tm-*.h files. - Define HAVE_68881 if that is the case. */ - -#if defined (HAVE_68881) -#define IEEE_FLOAT 1 -#endif - -/* Define the bit, byte, and word ordering of the machine. */ -#define TARGET_BYTE_ORDER BIG_ENDIAN - -/* Offset from address of function to start of its code. - Zero on most machines. */ - -#define FUNCTION_START_OFFSET 0 - -/* Advance PC across any function entry prologue instructions - to reach some "real" code. */ - -#if !defined(SKIP_PROLOGUE) -#define SKIP_PROLOGUE(ip) {(ip) = m68k_skip_prologue(ip);} -extern CORE_ADDR m68k_skip_prologue PARAMS ((CORE_ADDR ip)); -#endif - -/* Immediately after a function call, return the saved pc. - Can't always go through the frames for this because on some machines - the new frame is not set up until the new function executes - some instructions. */ - -#define SAVED_PC_AFTER_CALL(frame) \ -read_memory_integer (read_register (SP_REGNUM), 4) - -/* Stack grows downward. */ - -#define INNER_THAN < - -/* Sequence of bytes for breakpoint instruction. - This is a TRAP instruction. The last 4 bits (0xf below) is the - vector. Systems which don't use 0xf should define BPT_VECTOR - themselves before including this file. */ - -#if !defined (BPT_VECTOR) -#define BPT_VECTOR 0xf -#endif - -#if !defined (BREAKPOINT) -#define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)} -#endif - -/* If your kernel resets the pc after the trap happens you may need to - define this before including this file. */ - -#if !defined (DECR_PC_AFTER_BREAK) -#define DECR_PC_AFTER_BREAK 2 -#endif - -/* Nonzero if instruction at PC is a return instruction. */ -/* Allow any of the return instructions, including a trapv and a return - from interupt. */ - -#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74) - -/* Return 1 if P points to an invalid floating point value. */ - -#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */ - -/* Say how long registers are. */ - -#define REGISTER_TYPE long - -#if defined (HAVE_68881) -# if defined (GDB_TARGET_IS_SUN3) - /* Sun3 status includes fpflags, which shows whether the FPU has been used - by the process, and whether the FPU was done with an instruction or - was interrupted in the middle of a long instruction. See - <machine/reg.h>. */ - /* a&d, pc,sr, fp, fpstat, fpflags */ -# define NUM_REGS 31 -# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4) -# else /* Not sun3. */ -# define NUM_REGS 29 -# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4) -# endif /* Not sun3. */ -#else /* No 68881. */ -# define NUM_REGS 18 -# define REGISTER_BYTES (16*4 + 8) -#endif /* No 68881. */ - -/* Index within `registers' of the first byte of the space for - register N. */ - -#if defined (HAVE_68881) -#define REGISTER_BYTE(N) \ - ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \ - : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \ - : (N) * 4) - -/* Number of bytes of storage in the actual machine representation - for register N. On the 68000, all regs are 4 bytes - except the floating point regs which are 12 bytes. */ -/* Note that the unsigned cast here forces the result of the - subtraction to very high positive values if N < FP0_REGNUM */ - -#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4) - -/* Number of bytes of storage in the program's representation - for register N. On the 68000, all regs are 4 bytes - except the floating point regs which are 8-byte doubles. */ - -#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4) - -/* Largest value REGISTER_RAW_SIZE can have. */ - -#define MAX_REGISTER_RAW_SIZE 12 - -/* Largest value REGISTER_VIRTUAL_SIZE can have. */ - -#define MAX_REGISTER_VIRTUAL_SIZE 8 - -/* Nonzero if register N requires conversion - from raw format to virtual format. */ - -#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8) - -/* Put the declaration out here because if it's in the macros, PCC - will complain. */ -extern const struct ext_format ext_format_68881; - -/* Convert data from raw format for register REGNUM - to virtual format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \ -{ \ - if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \ - ieee_extended_to_double (&ext_format_68881, (FROM), (double *)(TO)); \ - else \ - memcpy ((TO), (FROM), 4); \ -} - -/* Convert data from virtual format for register REGNUM - to raw format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \ -{ \ - if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \ - double_to_ieee_extended (&ext_format_68881, (double *)(FROM), (TO)); \ - else \ - memcpy ((TO), (FROM), 4); \ -} - -/* Return the GDB type object for the "standard" data type - of data in register N. */ -/* Note, for registers which contain addresses return - pointer to void, not pointer to char, because we don't - want to attempt to print the string after printing the address. */ -#define REGISTER_VIRTUAL_TYPE(N) \ - (((unsigned)(N) - FP0_REGNUM) < 8 ? builtin_type_double : \ - (N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ? \ - lookup_pointer_type (builtin_type_void) : builtin_type_int) - -#else /* no 68881. */ -/* Index within `registers' of the first byte of the space for - register N. */ - -#define REGISTER_BYTE(N) ((N) * 4) - -/* Number of bytes of storage in the actual machine representation - for register N. On the 68000, all regs are 4 bytes. */ - -#define REGISTER_RAW_SIZE(N) 4 - -/* Number of bytes of storage in the program's representation - for register N. On the 68000, all regs are 4 bytes. */ - -#define REGISTER_VIRTUAL_SIZE(N) 4 - -/* Largest value REGISTER_RAW_SIZE can have. */ - -#define MAX_REGISTER_RAW_SIZE 4 - -/* Largest value REGISTER_VIRTUAL_SIZE can have. */ - -#define MAX_REGISTER_VIRTUAL_SIZE 4 - -/* Nonzero if register N requires conversion - from raw format to virtual format. */ - -#define REGISTER_CONVERTIBLE(N) 0 - -/* Convert data from raw format for register REGNUM - to virtual format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4); - -/* Convert data from virtual format for register REGNUM - to raw format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4); - -/* Return the GDB type object for the "standard" data type - of data in register N. */ - -#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int - -#endif /* No 68881. */ - -/* Initializer for an array of names of registers. - Entries beyond the first NUM_REGS are ignored. */ - -#define REGISTER_NAMES \ - {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \ - "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \ - "ps", "pc", \ - "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \ - "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" } - -/* Register numbers of various important registers. - Note that some of these values are "real" register numbers, - and correspond to the general registers of the machine, - and some are "phony" register numbers which are too large - to be actual register numbers as far as the user is concerned - but do serve to get the desired values when passed to read_register. */ - -#define A1_REGNUM 9 -#define FP_REGNUM 14 /* Contains address of executing stack frame */ -#define SP_REGNUM 15 /* Contains address of top of stack */ -#define PS_REGNUM 16 /* Contains processor status */ -#define PC_REGNUM 17 /* Contains program counter */ -#if defined (HAVE_68881) -#define FP0_REGNUM 18 /* Floating point register 0 */ -#define FPC_REGNUM 26 /* 68881 control register */ -#define FPS_REGNUM 27 /* 68881 status register */ -#define FPI_REGNUM 28 /* 68881 iaddr register */ -#endif /* 68881. */ - -/* Store the address of the place in which to copy the structure the - subroutine will return. This is called from call_function. */ - -#define STORE_STRUCT_RETURN(ADDR, SP) \ - { write_register (A1_REGNUM, (ADDR)); } - -/* Extract from an array REGBUF containing the (raw) register state - a function return value of type TYPE, and copy that, in virtual format, - into VALBUF. This is assuming that floating point values are returned - as doubles in d0/d1. */ - -#if !defined (EXTRACT_RETURN_VALUE) -#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ - memcpy ((VALBUF), \ - (char *)(REGBUF) + \ - (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \ - TYPE_LENGTH(TYPE)) -#endif - -/* Write into appropriate registers a function return value - of type TYPE, given in virtual format. Assumes floats are passed - in d0/d1. */ - -#if !defined (STORE_RETURN_VALUE) -#define STORE_RETURN_VALUE(TYPE,VALBUF) \ - write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) -#endif - -/* Extract from an array REGBUF containing the (raw) register state - the address in which a function should return its structure value, - as a CORE_ADDR (or an expression that can be used as one). */ - -#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) - -/* Describe the pointer in each stack frame to the previous stack frame - (its caller). */ - -/* FRAME_CHAIN takes a frame's nominal address and produces the frame's - chain-pointer. - In the case of the 68000, the frame's nominal address - is the address of a 4-byte word containing the calling frame's address. */ - -#define FRAME_CHAIN(thisframe) \ - (!inside_entry_file ((thisframe)->pc) ? \ - read_memory_integer ((thisframe)->frame, 4) :\ - 0) - -/* Define other aspects of the stack frame. */ - -/* A macro that tells us whether the function invocation represented - by FI does not have a frame on the stack associated with it. If it - does not, FRAMELESS is set to 1, else 0. */ -#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ - (FRAMELESS) = frameless_look_for_prologue(FI) - -#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) - -#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) - -#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) - -/* Set VAL to the number of args passed to frame described by FI. - Can set VAL to -1, meaning no way to tell. */ - -/* We can't tell how many args there are - now that the C compiler delays popping them. */ -#if !defined (FRAME_NUM_ARGS) -#define FRAME_NUM_ARGS(val,fi) (val = -1) -#endif - -/* Return number of bytes at start of arglist that are not really args. */ - -#define FRAME_ARGS_SKIP 8 - -/* Put here the code to store, into a struct frame_saved_regs, - the addresses of the saved registers of frame described by FRAME_INFO. - This includes special registers such as pc and fp saved in special - ways in the stack frame. sp is even more special: - the address we return for it IS the sp for the next frame. */ - -#if !defined (FRAME_FIND_SAVED_REGS) -#if defined (HAVE_68881) -#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ -{ register int regnum; \ - register int regmask; \ - register CORE_ADDR next_addr; \ - register CORE_ADDR pc; \ - int nextinsn; \ - bzero (&frame_saved_regs, sizeof frame_saved_regs); \ - if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \ - && (frame_info)->pc <= (frame_info)->frame) \ - { next_addr = (frame_info)->frame; \ - pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\ - else \ - { pc = get_pc_function_start ((frame_info)->pc); \ - /* Verify we have a link a6 instruction next; \ - if not we lose. If we win, find the address above the saved \ - regs using the amount of storage from the link instruction. */\ - if (044016 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \ - else if (047126 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \ - else goto lose; \ - /* If have an addal #-n, sp next, adjust next_addr. */ \ - if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \ - next_addr += read_memory_integer (pc += 2, 4), pc += 4; \ - } \ - /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \ - regmask = read_memory_integer (pc + 2, 2); \ - /* But before that can come an fmovem. Check for it. */ \ - nextinsn = 0xffff & read_memory_integer (pc, 2); \ - if (0xf227 == nextinsn \ - && (regmask & 0xff00) == 0xe000) \ - { pc += 4; /* Regmask's low bit is for register fp7, the first pushed */ \ - for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr -= 12); \ - regmask = read_memory_integer (pc + 2, 2); } \ - if (0044327 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 0, the first written */ \ - for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \ - else if (0044347 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \ - for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \ - { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - /* fmovemx to index of sp may follow. */ \ - regmask = read_memory_integer (pc + 2, 2); \ - nextinsn = 0xffff & read_memory_integer (pc, 2); \ - if (0xf236 == nextinsn \ - && (regmask & 0xff00) == 0xf000) \ - { pc += 10; /* Regmask's low bit is for register fp0, the first written */ \ - for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr += 12) - 12; \ - regmask = read_memory_integer (pc + 2, 2); } \ - /* clrw -(sp); movw ccr,-(sp) may follow. */ \ - if (0x426742e7 == read_memory_integer (pc, 4)) \ - (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \ - lose: ; \ - (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \ - (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ - (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \ -} -#else /* no 68881. */ -#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ -{ register int regnum; \ - register int regmask; \ - register CORE_ADDR next_addr; \ - register CORE_ADDR pc; \ - bzero (&frame_saved_regs, sizeof frame_saved_regs); \ - if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 4 \ - && (frame_info)->pc <= (frame_info)->frame) \ - { next_addr = (frame_info)->frame; \ - pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4; }\ - else \ - { pc = get_pc_function_start ((frame_info)->pc); \ - /* Verify we have a link a6 instruction next; \ - if not we lose. If we win, find the address above the saved \ - regs using the amount of storage from the link instruction. */\ - if (044016 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \ - else if (047126 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \ - else goto lose; \ - /* If have an addal #-n, sp next, adjust next_addr. */ \ - if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \ - next_addr += read_memory_integer (pc += 2, 4), pc += 4; \ - } \ - /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \ - regmask = read_memory_integer (pc + 2, 2); \ - if (0044327 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 0, the first written */ \ - for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \ - else if (0044347 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \ - for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \ - { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - /* clrw -(sp); movw ccr,-(sp) may follow. */ \ - if (0x426742e7 == read_memory_integer (pc, 4)) \ - (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \ - lose: ; \ - (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \ - (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ - (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \ -} -#endif /* no 68881. */ -#endif /* no FIND_FRAME_SAVED_REGS. */ - - -/* Things needed for making the inferior call functions. - It seems like every m68k based machine has almost identical definitions - in the individual machine's configuration files. Most other cpu types - (mips, i386, etc) have routines in their *-tdep.c files to handle this - for most configurations. The m68k family should be able to do this as - well. These macros can still be overridden when necessary. */ - -/* The CALL_DUMMY macro is the sequence of instructions, as disassembled - by gdb itself: - - fmovemx fp0-fp7,sp@- 0xf227 0xe0ff - moveml d0-a5,sp@- 0x48e7 0xfffc - clrw sp@- 0x4267 - movew ccr,sp@- 0x42e7 - - /..* The arguments are pushed at this point by GDB; - no code is needed in the dummy for this. - The CALL_DUMMY_START_OFFSET gives the position of - the following jsr instruction. *../ - - jsr @#0x32323232 0x4eb9 0x3232 0x3232 - addal #0x69696969,sp 0xdffc 0x6969 0x6969 - trap #<your BPT_VECTOR number here> 0x4e4? - nop 0x4e71 - - Note this is CALL_DUMMY_LENGTH bytes (28 for the above example). - We actually start executing at the jsr, since the pushing of the - registers is done by PUSH_DUMMY_FRAME. If this were real code, - the arguments for the function called by the jsr would be pushed - between the moveml and the jsr, and we could allow it to execute through. - But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is - done, and we cannot allow the moveml to push the registers again lest - they be taken for the arguments. */ - -#if defined (HAVE_68881) - -#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))} -#define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */ -#define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/ - -#else - -#define CALL_DUMMY {0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))} -#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */ -#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/ - -#endif /* HAVE_68881 */ - -/* Insert the specified number of args and function address - into a call sequence of the above form stored at DUMMYNAME. - We use the BFD routines to store a big-endian value of known size. */ - -#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ -{ _do_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \ - _do_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); } - -/* Push an empty stack frame, to record the current PC, etc. */ - -#define PUSH_DUMMY_FRAME { m68k_push_dummy_frame (); } - -extern void m68k_push_dummy_frame PARAMS ((void)); - -extern void m68k_pop_frame PARAMS ((void)); - -/* Discard from the stack the innermost frame, restoring all registers. */ - -#define POP_FRAME { m68k_pop_frame (); } - -/* Offset from SP to first arg on stack at first instruction of a function */ - -#define SP_ARG0 (1 * 4) |