diff options
Diffstat (limited to 'gdb/sparclet-stub.c')
| -rw-r--r-- | gdb/sparclet-stub.c | 2334 |
1 files changed, 1167 insertions, 1167 deletions
diff --git a/gdb/sparclet-stub.c b/gdb/sparclet-stub.c index f593df7..88740f2 100644 --- a/gdb/sparclet-stub.c +++ b/gdb/sparclet-stub.c @@ -1,1167 +1,1167 @@ -/**************************************************************************** - - THIS SOFTWARE IS NOT COPYRIGHTED - - HP offers the following for use in the public domain. HP makes no - warranty with regard to the software or it's performance and the - user accepts the software "AS IS" with all faults. - - HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD - TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. - -****************************************************************************/ - -/**************************************************************************** - * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $ - * - * Module name: remcom.c $ - * Revision: 1.34 $ - * Date: 91/03/09 12:29:49 $ - * Contributor: Lake Stevens Instrument Division$ - * - * Description: low level support for gdb debugger. $ - * - * Considerations: only works on target hardware $ - * - * Written by: Glenn Engel $ - * ModuleState: Experimental $ - * - * NOTES: See Below $ - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware - * breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support. - * - * This code has been extensively tested on the Fujitsu SPARClite demo board. - * - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a trap #1. - * - ************* - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * P set the value of a single CPU register OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $<packet info>#<checksum>. - * - * where - * <packet info> :: <characters representing the command or response> - * <checksum> :: <two hex digits computed as modulo 256 sum of <packetinfo>> - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - ****************************************************************************/ - -#include <string.h> -#include <signal.h> - -/************************************************************************ - * - * external low-level support routines - */ - -extern void putDebugChar(); /* write a single character */ -extern int getDebugChar(); /* read and return a single char */ - -/************************************************************************/ -/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ -/* at least NUMREGBYTES*2 are needed for register packets */ -#define BUFMAX 2048 - -static int initialized = 0; /* !0 means we've been initialized */ -static int remote_debug = 0; /* turn on verbose debugging */ - -extern void breakinst(); -void _cprint(); -static void hw_breakpoint(); -static void set_mem_fault_trap(); -static void get_in_break_mode(); -static unsigned char *mem2hex(); - -static const char hexchars[]="0123456789abcdef"; - -#define NUMREGS 121 - -static unsigned long saved_stack_pointer; - -/* Number of bytes of registers. */ -#define NUMREGBYTES (NUMREGS * 4) -enum regnames { G0, G1, G2, G3, G4, G5, G6, G7, - O0, O1, O2, O3, O4, O5, SP, O7, - L0, L1, L2, L3, L4, L5, L6, L7, - I0, I1, I2, I3, I4, I5, FP, I7, - - F0, F1, F2, F3, F4, F5, F6, F7, - F8, F9, F10, F11, F12, F13, F14, F15, - F16, F17, F18, F19, F20, F21, F22, F23, - F24, F25, F26, F27, F28, F29, F30, F31, - - Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR, - CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR, UNUSED1, - - ASR1, ASR15, ASR17, ASR18, ASR19, ASR20, ASR21, ASR22, - /* the following not actually implemented */ - AWR0, AWR1, AWR2, AWR3, AWR4, AWR5, AWR6, AWR7, - AWR8, AWR9, AWR10, AWR11, AWR12, AWR13, AWR14, AWR15, - AWR16, AWR17, AWR18, AWR19, AWR20, AWR21, AWR22, AWR23, - AWR24, AWR25, AWR26, AWR27, AWR28, AWR29, AWR30, AWR31, - APSR -}; - -/*************************** ASSEMBLY CODE MACROS *************************/ -/* */ - -extern void trap_low(); - -asm(" - .reserve trapstack, 1000 * 4, \"bss\", 8 - - .data - .align 4 - -in_trap_handler: - .word 0 - - .text - .align 4 - -! This function is called when any SPARC trap (except window overflow or -! underflow) occurs. It makes sure that the invalid register window is still -! available before jumping into C code. It will also restore the world if you -! return from handle_exception. -! -! On entry, trap_low expects l1 and l2 to contain pc and npc respectivly. - - .globl _trap_low -_trap_low: - mov %psr, %l0 - mov %wim, %l3 - - srl %l3, %l0, %l4 ! wim >> cwp - and %l4, 0xff, %l4 ! Mask off windows 28, 29 - cmp %l4, 1 - bne window_fine ! Branch if not in the invalid window - nop - -! Handle window overflow - - mov %g1, %l4 ! Save g1, we use it to hold the wim - srl %l3, 1, %g1 ! Rotate wim right - and %g1, 0xff, %g1 ! Mask off windows 28, 29 - tst %g1 - bg good_wim ! Branch if new wim is non-zero - nop - -! At this point, we need to bring a 1 into the high order bit of the wim. -! Since we don't want to make any assumptions about the number of register -! windows, we figure it out dynamically so as to setup the wim correctly. - - ! The normal way doesn't work on the sparclet as register windows - ! 28 and 29 are special purpose windows. - !not %g1 ! Fill g1 with ones - !mov %g1, %wim ! Fill the wim with ones - !nop - !nop - !nop - !mov %wim, %g1 ! Read back the wim - !inc %g1 ! Now g1 has 1 just to left of wim - !srl %g1, 1, %g1 ! Now put 1 at top of wim - - mov 0x80, %g1 ! Hack for sparclet - - ! This doesn't work on the sparclet. - !mov %g0, %wim ! Clear wim so that subsequent save - ! won't trap - andn %l3, 0xff, %l5 ! Clear wim but not windows 28, 29 - mov %l5, %wim - nop - nop - nop - -good_wim: - save %g0, %g0, %g0 ! Slip into next window - mov %g1, %wim ! Install the new wim - - std %l0, [%sp + 0 * 4] ! save L & I registers - std %l2, [%sp + 2 * 4] - std %l4, [%sp + 4 * 4] - std %l6, [%sp + 6 * 4] - - std %i0, [%sp + 8 * 4] - std %i2, [%sp + 10 * 4] - std %i4, [%sp + 12 * 4] - std %i6, [%sp + 14 * 4] - - restore ! Go back to trap window. - mov %l4, %g1 ! Restore %g1 - -window_fine: - sethi %hi(in_trap_handler), %l4 - ld [%lo(in_trap_handler) + %l4], %l5 - tst %l5 - bg recursive_trap - inc %l5 - - set trapstack+1000*4, %sp ! Switch to trap stack - -recursive_trap: - st %l5, [%lo(in_trap_handler) + %l4] - sub %sp,(16+1+6+1+88)*4,%sp ! Make room for input & locals - ! + hidden arg + arg spill - ! + doubleword alignment - ! + registers[121] - - std %g0, [%sp + (24 + 0) * 4] ! registers[Gx] - std %g2, [%sp + (24 + 2) * 4] - std %g4, [%sp + (24 + 4) * 4] - std %g6, [%sp + (24 + 6) * 4] - - std %i0, [%sp + (24 + 8) * 4] ! registers[Ox] - std %i2, [%sp + (24 + 10) * 4] - std %i4, [%sp + (24 + 12) * 4] - std %i6, [%sp + (24 + 14) * 4] - - ! FP regs (sparclet doesn't have fpu) - - mov %y, %l4 - mov %tbr, %l5 - st %l4, [%sp + (24 + 64) * 4] ! Y - st %l0, [%sp + (24 + 65) * 4] ! PSR - st %l3, [%sp + (24 + 66) * 4] ! WIM - st %l5, [%sp + (24 + 67) * 4] ! TBR - st %l1, [%sp + (24 + 68) * 4] ! PC - st %l2, [%sp + (24 + 69) * 4] ! NPC - ! CPSR and FPSR not impl - or %l0, 0xf20, %l4 - mov %l4, %psr ! Turn on traps, disable interrupts - nop - nop - nop - -! Save coprocessor state. -! See SK/demo/hdlc_demo/ldc_swap_context.S. - - mov %psr, %l0 - sethi %hi(0x2000), %l5 ! EC bit in PSR - or %l5, %l0, %l5 - mov %l5, %psr ! enable coprocessor - nop ! 3 nops after write to %psr (needed?) - nop - nop - crdcxt %ccsr, %l1 ! capture CCSR - mov 0x6, %l2 - cwrcxt %l2, %ccsr ! set CCP state machine for CCFR - crdcxt %ccfr, %l2 ! capture CCOR - cwrcxt %l2, %ccfr ! tickle CCFR - crdcxt %ccfr, %l3 ! capture CCOBR - cwrcxt %l3, %ccfr ! tickle CCFR - crdcxt %ccfr, %l4 ! capture CCIBR - cwrcxt %l4, %ccfr ! tickle CCFR - crdcxt %ccfr, %l5 ! capture CCIR - cwrcxt %l5, %ccfr ! tickle CCFR - crdcxt %ccpr, %l6 ! capture CCPR - crdcxt %cccrcr, %l7 ! capture CCCRCR - st %l1, [%sp + (24 + 72) * 4] ! save CCSR - st %l2, [%sp + (24 + 75) * 4] ! save CCOR - st %l3, [%sp + (24 + 76) * 4] ! save CCOBR - st %l4, [%sp + (24 + 77) * 4] ! save CCIBR - st %l5, [%sp + (24 + 78) * 4] ! save CCIR - st %l6, [%sp + (24 + 73) * 4] ! save CCPR - st %l7, [%sp + (24 + 74) * 4] ! save CCCRCR - mov %l0, %psr ! restore original PSR - nop ! 3 nops after write to %psr (needed?) - nop - nop - -! End of saving coprocessor state. -! Save asr regs - -! Part of this is silly -- we should not display ASR15 or ASR19 at all. - - sethi %hi(0x01000000), %l6 - st %l6, [%sp + (24 + 81) * 4] ! ASR15 == NOP - sethi %hi(0xdeadc0de), %l6 - or %l6, %lo(0xdeadc0de), %l6 - st %l6, [%sp + (24 + 84) * 4] ! ASR19 == DEADC0DE - - rd %asr1, %l4 - st %l4, [%sp + (24 + 80) * 4] -! rd %asr15, %l4 ! must not read ASR15 -! st %l4, [%sp + (24 + 81) * 4] ! (illegal instr trap) - rd %asr17, %l4 - st %l4, [%sp + (24 + 82) * 4] - rd %asr18, %l4 - st %l4, [%sp + (24 + 83) * 4] -! rd %asr19, %l4 ! must not read asr19 -! st %l4, [%sp + (24 + 84) * 4] ! (halts the CPU) - rd %asr20, %l4 - st %l4, [%sp + (24 + 85) * 4] - rd %asr21, %l4 - st %l4, [%sp + (24 + 86) * 4] - rd %asr22, %l4 - st %l4, [%sp + (24 + 87) * 4] - -! End of saving asr regs - - call _handle_exception - add %sp, 24 * 4, %o0 ! Pass address of registers - -! Reload all of the registers that aren't on the stack - - ld [%sp + (24 + 1) * 4], %g1 ! registers[Gx] - ldd [%sp + (24 + 2) * 4], %g2 - ldd [%sp + (24 + 4) * 4], %g4 - ldd [%sp + (24 + 6) * 4], %g6 - - ldd [%sp + (24 + 8) * 4], %i0 ! registers[Ox] - ldd [%sp + (24 + 10) * 4], %i2 - ldd [%sp + (24 + 12) * 4], %i4 - ldd [%sp + (24 + 14) * 4], %i6 - - ! FP regs (sparclet doesn't have fpu) - -! Update the coprocessor registers. -! See SK/demo/hdlc_demo/ldc_swap_context.S. - - mov %psr, %l0 - sethi %hi(0x2000), %l5 ! EC bit in PSR - or %l5, %l0, %l5 - mov %l5, %psr ! enable coprocessor - nop ! 3 nops after write to %psr (needed?) - nop - nop - - mov 0x6, %l2 - cwrcxt %l2, %ccsr ! set CCP state machine for CCFR - - ld [%sp + (24 + 72) * 4], %l1 ! saved CCSR - ld [%sp + (24 + 75) * 4], %l2 ! saved CCOR - ld [%sp + (24 + 76) * 4], %l3 ! saved CCOBR - ld [%sp + (24 + 77) * 4], %l4 ! saved CCIBR - ld [%sp + (24 + 78) * 4], %l5 ! saved CCIR - ld [%sp + (24 + 73) * 4], %l6 ! saved CCPR - ld [%sp + (24 + 74) * 4], %l7 ! saved CCCRCR - - cwrcxt %l2, %ccfr ! restore CCOR - cwrcxt %l3, %ccfr ! restore CCOBR - cwrcxt %l4, %ccfr ! restore CCIBR - cwrcxt %l5, %ccfr ! restore CCIR - cwrcxt %l6, %ccpr ! restore CCPR - cwrcxt %l7, %cccrcr ! restore CCCRCR - cwrcxt %l1, %ccsr ! restore CCSR - - mov %l0, %psr ! restore PSR - nop ! 3 nops after write to %psr (needed?) - nop - nop - -! End of coprocessor handling stuff. -! Update asr regs - - ld [%sp + (24 + 80) * 4], %l4 - wr %l4, %asr1 -! ld [%sp + (24 + 81) * 4], %l4 ! can't write asr15 -! wr %l4, %asr15 - ld [%sp + (24 + 82) * 4], %l4 - wr %l4, %asr17 - ld [%sp + (24 + 83) * 4], %l4 - wr %l4, %asr18 -! ld [%sp + (24 + 84) * 4], %l4 ! can't write asr19 -! wr %l4, %asr19 -! ld [%sp + (24 + 85) * 4], %l4 ! can't write asr20 -! wr %l4, %asr20 -! ld [%sp + (24 + 86) * 4], %l4 ! can't write asr21 -! wr %l4, %asr21 - ld [%sp + (24 + 87) * 4], %l4 - wr %l4, %asr22 - -! End of restoring asr regs - - - ldd [%sp + (24 + 64) * 4], %l0 ! Y & PSR - ldd [%sp + (24 + 68) * 4], %l2 ! PC & NPC - - restore ! Ensure that previous window is valid - save %g0, %g0, %g0 ! by causing a window_underflow trap - - mov %l0, %y - mov %l1, %psr ! Make sure that traps are disabled - ! for rett - nop ! 3 nops after write to %psr (needed?) - nop - nop - - sethi %hi(in_trap_handler), %l4 - ld [%lo(in_trap_handler) + %l4], %l5 - dec %l5 - st %l5, [%lo(in_trap_handler) + %l4] - - jmpl %l2, %g0 ! Restore old PC - rett %l3 ! Restore old nPC -"); - -/* Convert ch from a hex digit to an int */ - -static int -hex (unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -static char remcomInBuffer[BUFMAX]; -static char remcomOutBuffer[BUFMAX]; - -/* scan for the sequence $<data>#<checksum> */ - -unsigned char * -getpacket (void) -{ - unsigned char *buffer = &remcomInBuffer[0]; - unsigned char checksum; - unsigned char xmitcsum; - int count; - char ch; - - while (1) - { - /* wait around for the start character, ignore all other characters */ - while ((ch = getDebugChar ()) != '$') - ; - -retry: - checksum = 0; - xmitcsum = -1; - count = 0; - - /* now, read until a # or end of buffer is found */ - while (count < BUFMAX) - { - ch = getDebugChar (); - if (ch == '$') - goto retry; - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - buffer[count] = 0; - - if (ch == '#') - { - ch = getDebugChar (); - xmitcsum = hex (ch) << 4; - ch = getDebugChar (); - xmitcsum += hex (ch); - - if (checksum != xmitcsum) - { - putDebugChar ('-'); /* failed checksum */ - } - else - { - putDebugChar ('+'); /* successful transfer */ - - /* if a sequence char is present, reply the sequence ID */ - if (buffer[2] == ':') - { - putDebugChar (buffer[0]); - putDebugChar (buffer[1]); - - return &buffer[3]; - } - - return &buffer[0]; - } - } - } -} - -/* send the packet in buffer. */ - -static void -putpacket (unsigned char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* $<packet info>#<checksum>. */ - do - { - putDebugChar('$'); - checksum = 0; - count = 0; - - while (ch = buffer[count]) - { - putDebugChar(ch); - checksum += ch; - count += 1; - } - - putDebugChar('#'); - putDebugChar(hexchars[checksum >> 4]); - putDebugChar(hexchars[checksum & 0xf]); - - } - while (getDebugChar() != '+'); -} - -/* Indicate to caller of mem2hex or hex2mem that there has been an - error. */ -static volatile int mem_err = 0; - -/* Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null), in case of mem fault, - * return 0. - * If MAY_FAULT is non-zero, then we will handle memory faults by returning - * a 0, else treat a fault like any other fault in the stub. - */ - -static unsigned char * -mem2hex (unsigned char *mem, unsigned char *buf, int count, int may_fault) -{ - unsigned char ch; - - set_mem_fault_trap(may_fault); - - while (count-- > 0) - { - ch = *mem++; - if (mem_err) - return 0; - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch & 0xf]; - } - - *buf = 0; - - set_mem_fault_trap(0); - - return buf; -} - -/* convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written */ - -static char * -hex2mem (unsigned char *buf, unsigned char *mem, int count, int may_fault) -{ - int i; - unsigned char ch; - - set_mem_fault_trap(may_fault); - - for (i=0; i<count; i++) - { - ch = hex(*buf++) << 4; - ch |= hex(*buf++); - *mem++ = ch; - if (mem_err) - return 0; - } - - set_mem_fault_trap(0); - - return mem; -} - -/* This table contains the mapping between SPARC hardware trap types, and - signals, which are primarily what GDB understands. It also indicates - which hardware traps we need to commandeer when initializing the stub. */ - -static struct hard_trap_info -{ - unsigned char tt; /* Trap type code for SPARClite */ - unsigned char signo; /* Signal that we map this trap into */ -} hard_trap_info[] = { - {1, SIGSEGV}, /* instruction access exception */ - {0x3b, SIGSEGV}, /* instruction access error */ - {2, SIGILL}, /* illegal instruction */ - {3, SIGILL}, /* privileged instruction */ - {4, SIGEMT}, /* fp disabled */ - {0x24, SIGEMT}, /* cp disabled */ - {7, SIGBUS}, /* mem address not aligned */ - {0x29, SIGSEGV}, /* data access exception */ - {10, SIGEMT}, /* tag overflow */ - {128+1, SIGTRAP}, /* ta 1 - normal breakpoint instruction */ - {0, 0} /* Must be last */ -}; - -/* Set up exception handlers for tracing and breakpoints */ - -void -set_debug_traps (void) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - exceptionHandler(ht->tt, trap_low); - - initialized = 1; -} - -asm (" -! Trap handler for memory errors. This just sets mem_err to be non-zero. It -! assumes that %l1 is non-zero. This should be safe, as it is doubtful that -! 0 would ever contain code that could mem fault. This routine will skip -! past the faulting instruction after setting mem_err. - - .text - .align 4 - -_fltr_set_mem_err: - sethi %hi(_mem_err), %l0 - st %l1, [%l0 + %lo(_mem_err)] - jmpl %l2, %g0 - rett %l2+4 -"); - -static void -set_mem_fault_trap (int enable) -{ - extern void fltr_set_mem_err(); - mem_err = 0; - - if (enable) - exceptionHandler(0x29, fltr_set_mem_err); - else - exceptionHandler(0x29, trap_low); -} - -asm (" - .text - .align 4 - -_dummy_hw_breakpoint: - jmpl %l2, %g0 - rett %l2+4 - nop - nop -"); - -static void -set_hw_breakpoint_trap (int enable) -{ - extern void dummy_hw_breakpoint(); - - if (enable) - exceptionHandler(255, dummy_hw_breakpoint); - else - exceptionHandler(255, trap_low); -} - -static void -get_in_break_mode (void) -{ -#if 0 - int x; - mesg("get_in_break_mode, sp = "); - phex(&x); -#endif - set_hw_breakpoint_trap(1); - - asm(" - sethi %hi(0xff10), %l4 - or %l4, %lo(0xff10), %l4 - sta %g0, [%l4]0x1 - nop - nop - nop - "); - - set_hw_breakpoint_trap(0); -} - -/* Convert the SPARC hardware trap type code to a unix signal number. */ - -static int -computeSignal (int tt) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - if (ht->tt == tt) - return ht->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ - -static int -hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) - { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return (numChars); -} - -/* - * This function does all command procesing for interfacing to gdb. It - * returns 1 if you should skip the instruction at the trap address, 0 - * otherwise. - */ - -static void -handle_exception (unsigned long *registers) -{ - int tt; /* Trap type */ - int sigval; - int addr; - int length; - char *ptr; - unsigned long *sp; - unsigned long dsr; - -/* First, we must force all of the windows to be spilled out */ - - asm(" - ! Ugh. sparclet has broken save - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - !save %sp, -64, %sp - save - add %fp,-64,%sp - restore - restore - restore - restore - restore - restore - restore - restore -"); - - if (registers[PC] == (unsigned long)breakinst) - { - registers[PC] = registers[NPC]; - registers[NPC] += 4; - } - sp = (unsigned long *)registers[SP]; - - tt = (registers[TBR] >> 4) & 0xff; - - /* reply to host that an exception has occurred */ - sigval = computeSignal(tt); - ptr = remcomOutBuffer; - - *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; - - *ptr++ = hexchars[PC >> 4]; - *ptr++ = hexchars[PC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®isters[PC], ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = hexchars[FP >> 4]; - *ptr++ = hexchars[FP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */ - *ptr++ = ';'; - - *ptr++ = hexchars[SP >> 4]; - *ptr++ = hexchars[SP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)&sp, ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = hexchars[NPC >> 4]; - *ptr++ = hexchars[NPC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®isters[NPC], ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = hexchars[O7 >> 4]; - *ptr++ = hexchars[O7 & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®isters[O7], ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = 0; - - putpacket(remcomOutBuffer); - - while (1) - { - remcomOutBuffer[0] = 0; - - ptr = getpacket(); - switch (*ptr++) - { - case '?': - remcomOutBuffer[0] = 'S'; - remcomOutBuffer[1] = hexchars[sigval >> 4]; - remcomOutBuffer[2] = hexchars[sigval & 0xf]; - remcomOutBuffer[3] = 0; - break; - - case 'd': - remote_debug = !(remote_debug); /* toggle debug flag */ - break; - - case 'g': /* return the value of the CPU registers */ - { - ptr = remcomOutBuffer; - ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */ - ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */ - memset(ptr, '0', 32 * 8); /* Floating point */ - ptr = mem2hex((char *)®isters[Y], - ptr + 32 * 4 * 2, - 8 * 4, - 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */ - ptr = mem2hex((char *)®isters[CCSR], - ptr, - 8 * 4, - 0); /* CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR */ - ptr = mem2hex((char *)®isters[ASR1], - ptr, - 8 * 4, - 0); /* ASR1,ASR15,ASR17,ASR18,ASR19,ASR20,ASR21,ASR22 */ -#if 0 /* not implemented */ - ptr = mem2hex((char *) ®isters[AWR0], - ptr, - 32 * 4, - 0); /* Alternate Window Registers */ -#endif - } - break; - - case 'G': /* set value of all the CPU registers - return OK */ - case 'P': /* set value of one CPU register - return OK */ - { - unsigned long *newsp, psr; - - psr = registers[PSR]; - - if (ptr[-1] == 'P') /* do a single register */ - { - int regno; - - if (hexToInt (&ptr, ®no) - && *ptr++ == '=') - if (regno >= L0 && regno <= I7) - hex2mem (ptr, sp + regno - L0, 4, 0); - else - hex2mem (ptr, (char *)®isters[regno], 4, 0); - else - { - strcpy (remcomOutBuffer, "E01"); - break; - } - } - else - { - hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */ - hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */ - hex2mem(ptr + 64 * 4 * 2, (char *)®isters[Y], - 8 * 4, 0); /* Y,PSR,WIM,TBR,PC,NPC,FPSR,CPSR */ - hex2mem(ptr + 72 * 4 * 2, (char *)®isters[CCSR], - 8 * 4, 0); /* CCSR,CCPR,CCCRCR,CCOR,CCOBR,CCIBR,CCIR */ - hex2mem(ptr + 80 * 4 * 2, (char *)®isters[ASR1], - 8 * 4, 0); /* ASR1 ... ASR22 */ -#if 0 /* not implemented */ - hex2mem(ptr + 88 * 4 * 2, (char *)®isters[AWR0], - 8 * 4, 0); /* Alternate Window Registers */ -#endif - } - /* See if the stack pointer has moved. If so, then copy the saved - locals and ins to the new location. This keeps the window - overflow and underflow routines happy. */ - - newsp = (unsigned long *)registers[SP]; - if (sp != newsp) - sp = memcpy(newsp, sp, 16 * 4); - - /* Don't allow CWP to be modified. */ - - if (psr != registers[PSR]) - registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f); - - strcpy(remcomOutBuffer,"OK"); - } - break; - - case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ - /* Try to read %x,%x. */ - - if (hexToInt(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length)) - { - if (mem2hex((char *)addr, remcomOutBuffer, length, 1)) - break; - - strcpy (remcomOutBuffer, "E03"); - } - else - strcpy(remcomOutBuffer,"E01"); - break; - - case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */ - /* Try to read '%x,%x:'. */ - - if (hexToInt(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length) - && *ptr++ == ':') - { - if (hex2mem(ptr, (char *)addr, length, 1)) - strcpy(remcomOutBuffer, "OK"); - else - strcpy(remcomOutBuffer, "E03"); - } - else - strcpy(remcomOutBuffer, "E02"); - break; - - case 'c': /* cAA..AA Continue at address AA..AA(optional) */ - /* try to read optional parameter, pc unchanged if no parm */ - - if (hexToInt(&ptr, &addr)) - { - registers[PC] = addr; - registers[NPC] = addr + 4; - } - -/* Need to flush the instruction cache here, as we may have deposited a - breakpoint, and the icache probably has no way of knowing that a data ref to - some location may have changed something that is in the instruction cache. - */ - - flush_i_cache(); - return; - - /* kill the program */ - case 'k' : /* do nothing */ - break; -#if 0 - case 't': /* Test feature */ - asm (" std %f30,[%sp]"); - break; -#endif - case 'r': /* Reset */ - asm ("call 0 - nop "); - break; - } /* switch */ - - /* reply to the request */ - putpacket(remcomOutBuffer); - } -} - -/* This function will generate a breakpoint exception. It is used at the - beginning of a program to sync up with a debugger and can be used - otherwise as a quick means to stop program execution and "break" into - the debugger. */ - -void -breakpoint (void) -{ - if (!initialized) - return; - - asm(" .globl _breakinst - - _breakinst: ta 1 - "); -} - -static void -hw_breakpoint (void) -{ - asm(" - ta 127 - "); -} - -#if 0 /* experimental and never finished, left here for reference */ -static void -splet_temp(void) -{ - asm(" sub %sp,(16+1+6+1+121)*4,%sp ! Make room for input & locals - ! + hidden arg + arg spill - ! + doubleword alignment - ! + registers[121] - -! Leave a trail of breadcrumbs! (save register save area for debugging) - mov %sp, %l0 - add %l0, 24*4, %l0 - sethi %hi(_debug_registers), %l1 - st %l0, [%lo(_debug_registers) + %l1] - -! Save the Alternate Register Set: (not implemented yet) -! To save the Alternate Register set, we must: -! 1) Save the current SP in some global location. -! 2) Swap the register sets. -! 3) Save the Alternate SP in the Y register -! 4) Fetch the SP that we saved in step 1. -! 5) Use that to save the rest of the regs (not forgetting ASP in Y) -! 6) Restore the Alternate SP from Y -! 7) Swap the registers back. - -! 1) Copy the current stack pointer to global _SAVED_STACK_POINTER: - sethi %hi(_saved_stack_pointer), %l0 - st %sp, [%lo(_saved_stack_pointer) + %l0] - -! 2) Swap the register sets: - mov %psr, %l1 - sethi %hi(0x10000), %l2 - xor %l1, %l2, %l1 - mov %l1, %psr - nop ! 3 nops after write to %psr (needed?) - nop - nop - -! 3) Save Alternate L0 in Y - wr %l0, 0, %y - -! 4) Load former SP into alternate SP, using L0 - sethi %hi(_saved_stack_pointer), %l0 - or %lo(_saved_stack_pointer), %l0, %l0 - swap [%l0], %sp - -! 4.5) Restore alternate L0 - rd %y, %l0 - -! 5) Save the Alternate Window Registers - st %r0, [%sp + (24 + 88) * 4] ! AWR0 - st %r1, [%sp + (24 + 89) * 4] ! AWR1 - st %r2, [%sp + (24 + 90) * 4] ! AWR2 - st %r3, [%sp + (24 + 91) * 4] ! AWR3 - st %r4, [%sp + (24 + 92) * 4] ! AWR4 - st %r5, [%sp + (24 + 93) * 4] ! AWR5 - st %r6, [%sp + (24 + 94) * 4] ! AWR6 - st %r7, [%sp + (24 + 95) * 4] ! AWR7 - st %r8, [%sp + (24 + 96) * 4] ! AWR8 - st %r9, [%sp + (24 + 97) * 4] ! AWR9 - st %r10, [%sp + (24 + 98) * 4] ! AWR10 - st %r11, [%sp + (24 + 99) * 4] ! AWR11 - st %r12, [%sp + (24 + 100) * 4] ! AWR12 - st %r13, [%sp + (24 + 101) * 4] ! AWR13 -! st %r14, [%sp + (24 + 102) * 4] ! AWR14 (SP) - st %r15, [%sp + (24 + 103) * 4] ! AWR15 - st %r16, [%sp + (24 + 104) * 4] ! AWR16 - st %r17, [%sp + (24 + 105) * 4] ! AWR17 - st %r18, [%sp + (24 + 106) * 4] ! AWR18 - st %r19, [%sp + (24 + 107) * 4] ! AWR19 - st %r20, [%sp + (24 + 108) * 4] ! AWR20 - st %r21, [%sp + (24 + 109) * 4] ! AWR21 - st %r22, [%sp + (24 + 110) * 4] ! AWR22 - st %r23, [%sp + (24 + 111) * 4] ! AWR23 - st %r24, [%sp + (24 + 112) * 4] ! AWR24 - st %r25, [%sp + (24 + 113) * 4] ! AWR25 - st %r26, [%sp + (24 + 114) * 4] ! AWR26 - st %r27, [%sp + (24 + 115) * 4] ! AWR27 - st %r28, [%sp + (24 + 116) * 4] ! AWR28 - st %r29, [%sp + (24 + 117) * 4] ! AWR29 - st %r30, [%sp + (24 + 118) * 4] ! AWR30 - st %r31, [%sp + (24 + 119) * 4] ! AWR21 - -! Get the Alternate PSR (I hope...) - - rd %psr, %l2 - st %l2, [%sp + (24 + 120) * 4] ! APSR - -! Don't forget the alternate stack pointer - - rd %y, %l3 - st %l3, [%sp + (24 + 102) * 4] ! AWR14 (SP) - -! 6) Restore the Alternate SP (saved in Y) - - rd %y, %o6 - - -! 7) Swap the registers back: - - mov %psr, %l1 - sethi %hi(0x10000), %l2 - xor %l1, %l2, %l1 - mov %l1, %psr - nop ! 3 nops after write to %psr (needed?) - nop - nop -"); -} - -#endif +// OBSOLETE /**************************************************************************** +// OBSOLETE +// OBSOLETE THIS SOFTWARE IS NOT COPYRIGHTED +// OBSOLETE +// OBSOLETE HP offers the following for use in the public domain. HP makes no +// OBSOLETE warranty with regard to the software or it's performance and the +// OBSOLETE user accepts the software "AS IS" with all faults. +// OBSOLETE +// OBSOLETE HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD +// OBSOLETE TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES +// OBSOLETE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. +// OBSOLETE +// OBSOLETE ****************************************************************************/ +// OBSOLETE +// OBSOLETE /**************************************************************************** +// OBSOLETE * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $ +// OBSOLETE * +// OBSOLETE * Module name: remcom.c $ +// OBSOLETE * Revision: 1.34 $ +// OBSOLETE * Date: 91/03/09 12:29:49 $ +// OBSOLETE * Contributor: Lake Stevens Instrument Division$ +// OBSOLETE * +// OBSOLETE * Description: low level support for gdb debugger. $ +// OBSOLETE * +// OBSOLETE * Considerations: only works on target hardware $ +// OBSOLETE * +// OBSOLETE * Written by: Glenn Engel $ +// OBSOLETE * ModuleState: Experimental $ +// OBSOLETE * +// OBSOLETE * NOTES: See Below $ +// OBSOLETE * +// OBSOLETE * Modified for SPARC by Stu Grossman, Cygnus Support. +// OBSOLETE * Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware +// OBSOLETE * breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support. +// OBSOLETE * +// OBSOLETE * This code has been extensively tested on the Fujitsu SPARClite demo board. +// OBSOLETE * +// OBSOLETE * To enable debugger support, two things need to happen. One, a +// OBSOLETE * call to set_debug_traps() is necessary in order to allow any breakpoints +// OBSOLETE * or error conditions to be properly intercepted and reported to gdb. +// OBSOLETE * Two, a breakpoint needs to be generated to begin communication. This +// OBSOLETE * is most easily accomplished by a call to breakpoint(). Breakpoint() +// OBSOLETE * simulates a breakpoint by executing a trap #1. +// OBSOLETE * +// OBSOLETE ************* +// OBSOLETE * +// OBSOLETE * The following gdb commands are supported: +// OBSOLETE * +// OBSOLETE * command function Return value +// OBSOLETE * +// OBSOLETE * g return the value of the CPU registers hex data or ENN +// OBSOLETE * G set the value of the CPU registers OK or ENN +// OBSOLETE * P set the value of a single CPU register OK or ENN +// OBSOLETE * +// OBSOLETE * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN +// OBSOLETE * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN +// OBSOLETE * +// OBSOLETE * c Resume at current address SNN ( signal NN) +// OBSOLETE * cAA..AA Continue at address AA..AA SNN +// OBSOLETE * +// OBSOLETE * s Step one instruction SNN +// OBSOLETE * sAA..AA Step one instruction from AA..AA SNN +// OBSOLETE * +// OBSOLETE * k kill +// OBSOLETE * +// OBSOLETE * ? What was the last sigval ? SNN (signal NN) +// OBSOLETE * +// OBSOLETE * All commands and responses are sent with a packet which includes a +// OBSOLETE * checksum. A packet consists of +// OBSOLETE * +// OBSOLETE * $<packet info>#<checksum>. +// OBSOLETE * +// OBSOLETE * where +// OBSOLETE * <packet info> :: <characters representing the command or response> +// OBSOLETE * <checksum> :: <two hex digits computed as modulo 256 sum of <packetinfo>> +// OBSOLETE * +// OBSOLETE * When a packet is received, it is first acknowledged with either '+' or '-'. +// OBSOLETE * '+' indicates a successful transfer. '-' indicates a failed transfer. +// OBSOLETE * +// OBSOLETE * Example: +// OBSOLETE * +// OBSOLETE * Host: Reply: +// OBSOLETE * $m0,10#2a +$00010203040506070809101112131415#42 +// OBSOLETE * +// OBSOLETE ****************************************************************************/ +// OBSOLETE +// OBSOLETE #include <string.h> +// OBSOLETE #include <signal.h> +// OBSOLETE +// OBSOLETE /************************************************************************ +// OBSOLETE * +// OBSOLETE * external low-level support routines +// OBSOLETE */ +// OBSOLETE +// OBSOLETE extern void putDebugChar(); /* write a single character */ +// OBSOLETE extern int getDebugChar(); /* read and return a single char */ +// OBSOLETE +// OBSOLETE /************************************************************************/ +// OBSOLETE /* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ +// OBSOLETE /* at least NUMREGBYTES*2 are needed for register packets */ +// OBSOLETE #define BUFMAX 2048 +// OBSOLETE +// OBSOLETE static int initialized = 0; /* !0 means we've been initialized */ +// OBSOLETE static int remote_debug = 0; /* turn on verbose debugging */ +// OBSOLETE +// OBSOLETE extern void breakinst(); +// OBSOLETE void _cprint(); +// OBSOLETE static void hw_breakpoint(); +// OBSOLETE static void set_mem_fault_trap(); +// OBSOLETE static void get_in_break_mode(); +// OBSOLETE static unsigned char *mem2hex(); +// OBSOLETE +// OBSOLETE static const char hexchars[]="0123456789abcdef"; +// OBSOLETE +// OBSOLETE #define NUMREGS 121 +// OBSOLETE +// OBSOLETE static unsigned long saved_stack_pointer; +// OBSOLETE +// OBSOLETE /* Number of bytes of registers. */ +// OBSOLETE #define NUMREGBYTES (NUMREGS * 4) +// OBSOLETE enum regnames { G0, G1, G2, G3, G4, G5, G6, G7, +// OBSOLETE O0, O1, O2, O3, O4, O5, SP, O7, +// OBSOLETE L0, L1, L2, L3, L4, L5, L6, L7, +// OBSOLETE I0, I1, I2, I3, I4, I5, FP, I7, +// OBSOLETE +// OBSOLETE F0, F1, F2, F3, F4, F5, F6, F7, +// OBSOLETE F8, F9, F10, F11, F12, F13, F14, F15, +// OBSOLETE F16, F17, F18, F19, F20, F21, F22, F23, +// OBSOLETE F24, F25, F26, F27, F28, F29, F30, F31, +// OBSOLETE +// OBSOLETE Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR, +// OBSOLETE CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR, UNUSED1, +// OBSOLETE +// OBSOLETE ASR1, ASR15, ASR17, ASR18, ASR19, ASR20, ASR21, ASR22, +// OBSOLETE /* the following not actually implemented */ +// OBSOLETE AWR0, AWR1, AWR2, AWR3, AWR4, AWR5, AWR6, AWR7, +// OBSOLETE AWR8, AWR9, AWR10, AWR11, AWR12, AWR13, AWR14, AWR15, +// OBSOLETE AWR16, AWR17, AWR18, AWR19, AWR20, AWR21, AWR22, AWR23, +// OBSOLETE AWR24, AWR25, AWR26, AWR27, AWR28, AWR29, AWR30, AWR31, +// OBSOLETE APSR +// OBSOLETE }; +// OBSOLETE +// OBSOLETE /*************************** ASSEMBLY CODE MACROS *************************/ +// OBSOLETE /* */ +// OBSOLETE +// OBSOLETE extern void trap_low(); +// OBSOLETE +// OBSOLETE asm(" +// OBSOLETE .reserve trapstack, 1000 * 4, \"bss\", 8 +// OBSOLETE +// OBSOLETE .data +// OBSOLETE .align 4 +// OBSOLETE +// OBSOLETE in_trap_handler: +// OBSOLETE .word 0 +// OBSOLETE +// OBSOLETE .text +// OBSOLETE .align 4 +// OBSOLETE +// OBSOLETE ! This function is called when any SPARC trap (except window overflow or +// OBSOLETE ! underflow) occurs. It makes sure that the invalid register window is still +// OBSOLETE ! available before jumping into C code. It will also restore the world if you +// OBSOLETE ! return from handle_exception. +// OBSOLETE ! +// OBSOLETE ! On entry, trap_low expects l1 and l2 to contain pc and npc respectivly. +// OBSOLETE +// OBSOLETE .globl _trap_low +// OBSOLETE _trap_low: +// OBSOLETE mov %psr, %l0 +// OBSOLETE mov %wim, %l3 +// OBSOLETE +// OBSOLETE srl %l3, %l0, %l4 ! wim >> cwp +// OBSOLETE and %l4, 0xff, %l4 ! Mask off windows 28, 29 +// OBSOLETE cmp %l4, 1 +// OBSOLETE bne window_fine ! Branch if not in the invalid window +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! Handle window overflow +// OBSOLETE +// OBSOLETE mov %g1, %l4 ! Save g1, we use it to hold the wim +// OBSOLETE srl %l3, 1, %g1 ! Rotate wim right +// OBSOLETE and %g1, 0xff, %g1 ! Mask off windows 28, 29 +// OBSOLETE tst %g1 +// OBSOLETE bg good_wim ! Branch if new wim is non-zero +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! At this point, we need to bring a 1 into the high order bit of the wim. +// OBSOLETE ! Since we don't want to make any assumptions about the number of register +// OBSOLETE ! windows, we figure it out dynamically so as to setup the wim correctly. +// OBSOLETE +// OBSOLETE ! The normal way doesn't work on the sparclet as register windows +// OBSOLETE ! 28 and 29 are special purpose windows. +// OBSOLETE !not %g1 ! Fill g1 with ones +// OBSOLETE !mov %g1, %wim ! Fill the wim with ones +// OBSOLETE !nop +// OBSOLETE !nop +// OBSOLETE !nop +// OBSOLETE !mov %wim, %g1 ! Read back the wim +// OBSOLETE !inc %g1 ! Now g1 has 1 just to left of wim +// OBSOLETE !srl %g1, 1, %g1 ! Now put 1 at top of wim +// OBSOLETE +// OBSOLETE mov 0x80, %g1 ! Hack for sparclet +// OBSOLETE +// OBSOLETE ! This doesn't work on the sparclet. +// OBSOLETE !mov %g0, %wim ! Clear wim so that subsequent save +// OBSOLETE ! won't trap +// OBSOLETE andn %l3, 0xff, %l5 ! Clear wim but not windows 28, 29 +// OBSOLETE mov %l5, %wim +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE good_wim: +// OBSOLETE save %g0, %g0, %g0 ! Slip into next window +// OBSOLETE mov %g1, %wim ! Install the new wim +// OBSOLETE +// OBSOLETE std %l0, [%sp + 0 * 4] ! save L & I registers +// OBSOLETE std %l2, [%sp + 2 * 4] +// OBSOLETE std %l4, [%sp + 4 * 4] +// OBSOLETE std %l6, [%sp + 6 * 4] +// OBSOLETE +// OBSOLETE std %i0, [%sp + 8 * 4] +// OBSOLETE std %i2, [%sp + 10 * 4] +// OBSOLETE std %i4, [%sp + 12 * 4] +// OBSOLETE std %i6, [%sp + 14 * 4] +// OBSOLETE +// OBSOLETE restore ! Go back to trap window. +// OBSOLETE mov %l4, %g1 ! Restore %g1 +// OBSOLETE +// OBSOLETE window_fine: +// OBSOLETE sethi %hi(in_trap_handler), %l4 +// OBSOLETE ld [%lo(in_trap_handler) + %l4], %l5 +// OBSOLETE tst %l5 +// OBSOLETE bg recursive_trap +// OBSOLETE inc %l5 +// OBSOLETE +// OBSOLETE set trapstack+1000*4, %sp ! Switch to trap stack +// OBSOLETE +// OBSOLETE recursive_trap: +// OBSOLETE st %l5, [%lo(in_trap_handler) + %l4] +// OBSOLETE sub %sp,(16+1+6+1+88)*4,%sp ! Make room for input & locals +// OBSOLETE ! + hidden arg + arg spill +// OBSOLETE ! + doubleword alignment +// OBSOLETE ! + registers[121] +// OBSOLETE +// OBSOLETE std %g0, [%sp + (24 + 0) * 4] ! registers[Gx] +// OBSOLETE std %g2, [%sp + (24 + 2) * 4] +// OBSOLETE std %g4, [%sp + (24 + 4) * 4] +// OBSOLETE std %g6, [%sp + (24 + 6) * 4] +// OBSOLETE +// OBSOLETE std %i0, [%sp + (24 + 8) * 4] ! registers[Ox] +// OBSOLETE std %i2, [%sp + (24 + 10) * 4] +// OBSOLETE std %i4, [%sp + (24 + 12) * 4] +// OBSOLETE std %i6, [%sp + (24 + 14) * 4] +// OBSOLETE +// OBSOLETE ! FP regs (sparclet doesn't have fpu) +// OBSOLETE +// OBSOLETE mov %y, %l4 +// OBSOLETE mov %tbr, %l5 +// OBSOLETE st %l4, [%sp + (24 + 64) * 4] ! Y +// OBSOLETE st %l0, [%sp + (24 + 65) * 4] ! PSR +// OBSOLETE st %l3, [%sp + (24 + 66) * 4] ! WIM +// OBSOLETE st %l5, [%sp + (24 + 67) * 4] ! TBR +// OBSOLETE st %l1, [%sp + (24 + 68) * 4] ! PC +// OBSOLETE st %l2, [%sp + (24 + 69) * 4] ! NPC +// OBSOLETE ! CPSR and FPSR not impl +// OBSOLETE or %l0, 0xf20, %l4 +// OBSOLETE mov %l4, %psr ! Turn on traps, disable interrupts +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! Save coprocessor state. +// OBSOLETE ! See SK/demo/hdlc_demo/ldc_swap_context.S. +// OBSOLETE +// OBSOLETE mov %psr, %l0 +// OBSOLETE sethi %hi(0x2000), %l5 ! EC bit in PSR +// OBSOLETE or %l5, %l0, %l5 +// OBSOLETE mov %l5, %psr ! enable coprocessor +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE crdcxt %ccsr, %l1 ! capture CCSR +// OBSOLETE mov 0x6, %l2 +// OBSOLETE cwrcxt %l2, %ccsr ! set CCP state machine for CCFR +// OBSOLETE crdcxt %ccfr, %l2 ! capture CCOR +// OBSOLETE cwrcxt %l2, %ccfr ! tickle CCFR +// OBSOLETE crdcxt %ccfr, %l3 ! capture CCOBR +// OBSOLETE cwrcxt %l3, %ccfr ! tickle CCFR +// OBSOLETE crdcxt %ccfr, %l4 ! capture CCIBR +// OBSOLETE cwrcxt %l4, %ccfr ! tickle CCFR +// OBSOLETE crdcxt %ccfr, %l5 ! capture CCIR +// OBSOLETE cwrcxt %l5, %ccfr ! tickle CCFR +// OBSOLETE crdcxt %ccpr, %l6 ! capture CCPR +// OBSOLETE crdcxt %cccrcr, %l7 ! capture CCCRCR +// OBSOLETE st %l1, [%sp + (24 + 72) * 4] ! save CCSR +// OBSOLETE st %l2, [%sp + (24 + 75) * 4] ! save CCOR +// OBSOLETE st %l3, [%sp + (24 + 76) * 4] ! save CCOBR +// OBSOLETE st %l4, [%sp + (24 + 77) * 4] ! save CCIBR +// OBSOLETE st %l5, [%sp + (24 + 78) * 4] ! save CCIR +// OBSOLETE st %l6, [%sp + (24 + 73) * 4] ! save CCPR +// OBSOLETE st %l7, [%sp + (24 + 74) * 4] ! save CCCRCR +// OBSOLETE mov %l0, %psr ! restore original PSR +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! End of saving coprocessor state. +// OBSOLETE ! Save asr regs +// OBSOLETE +// OBSOLETE ! Part of this is silly -- we should not display ASR15 or ASR19 at all. +// OBSOLETE +// OBSOLETE sethi %hi(0x01000000), %l6 +// OBSOLETE st %l6, [%sp + (24 + 81) * 4] ! ASR15 == NOP +// OBSOLETE sethi %hi(0xdeadc0de), %l6 +// OBSOLETE or %l6, %lo(0xdeadc0de), %l6 +// OBSOLETE st %l6, [%sp + (24 + 84) * 4] ! ASR19 == DEADC0DE +// OBSOLETE +// OBSOLETE rd %asr1, %l4 +// OBSOLETE st %l4, [%sp + (24 + 80) * 4] +// OBSOLETE ! rd %asr15, %l4 ! must not read ASR15 +// OBSOLETE ! st %l4, [%sp + (24 + 81) * 4] ! (illegal instr trap) +// OBSOLETE rd %asr17, %l4 +// OBSOLETE st %l4, [%sp + (24 + 82) * 4] +// OBSOLETE rd %asr18, %l4 +// OBSOLETE st %l4, [%sp + (24 + 83) * 4] +// OBSOLETE ! rd %asr19, %l4 ! must not read asr19 +// OBSOLETE ! st %l4, [%sp + (24 + 84) * 4] ! (halts the CPU) +// OBSOLETE rd %asr20, %l4 +// OBSOLETE st %l4, [%sp + (24 + 85) * 4] +// OBSOLETE rd %asr21, %l4 +// OBSOLETE st %l4, [%sp + (24 + 86) * 4] +// OBSOLETE rd %asr22, %l4 +// OBSOLETE st %l4, [%sp + (24 + 87) * 4] +// OBSOLETE +// OBSOLETE ! End of saving asr regs +// OBSOLETE +// OBSOLETE call _handle_exception +// OBSOLETE add %sp, 24 * 4, %o0 ! Pass address of registers +// OBSOLETE +// OBSOLETE ! Reload all of the registers that aren't on the stack +// OBSOLETE +// OBSOLETE ld [%sp + (24 + 1) * 4], %g1 ! registers[Gx] +// OBSOLETE ldd [%sp + (24 + 2) * 4], %g2 +// OBSOLETE ldd [%sp + (24 + 4) * 4], %g4 +// OBSOLETE ldd [%sp + (24 + 6) * 4], %g6 +// OBSOLETE +// OBSOLETE ldd [%sp + (24 + 8) * 4], %i0 ! registers[Ox] +// OBSOLETE ldd [%sp + (24 + 10) * 4], %i2 +// OBSOLETE ldd [%sp + (24 + 12) * 4], %i4 +// OBSOLETE ldd [%sp + (24 + 14) * 4], %i6 +// OBSOLETE +// OBSOLETE ! FP regs (sparclet doesn't have fpu) +// OBSOLETE +// OBSOLETE ! Update the coprocessor registers. +// OBSOLETE ! See SK/demo/hdlc_demo/ldc_swap_context.S. +// OBSOLETE +// OBSOLETE mov %psr, %l0 +// OBSOLETE sethi %hi(0x2000), %l5 ! EC bit in PSR +// OBSOLETE or %l5, %l0, %l5 +// OBSOLETE mov %l5, %psr ! enable coprocessor +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE mov 0x6, %l2 +// OBSOLETE cwrcxt %l2, %ccsr ! set CCP state machine for CCFR +// OBSOLETE +// OBSOLETE ld [%sp + (24 + 72) * 4], %l1 ! saved CCSR +// OBSOLETE ld [%sp + (24 + 75) * 4], %l2 ! saved CCOR +// OBSOLETE ld [%sp + (24 + 76) * 4], %l3 ! saved CCOBR +// OBSOLETE ld [%sp + (24 + 77) * 4], %l4 ! saved CCIBR +// OBSOLETE ld [%sp + (24 + 78) * 4], %l5 ! saved CCIR +// OBSOLETE ld [%sp + (24 + 73) * 4], %l6 ! saved CCPR +// OBSOLETE ld [%sp + (24 + 74) * 4], %l7 ! saved CCCRCR +// OBSOLETE +// OBSOLETE cwrcxt %l2, %ccfr ! restore CCOR +// OBSOLETE cwrcxt %l3, %ccfr ! restore CCOBR +// OBSOLETE cwrcxt %l4, %ccfr ! restore CCIBR +// OBSOLETE cwrcxt %l5, %ccfr ! restore CCIR +// OBSOLETE cwrcxt %l6, %ccpr ! restore CCPR +// OBSOLETE cwrcxt %l7, %cccrcr ! restore CCCRCR +// OBSOLETE cwrcxt %l1, %ccsr ! restore CCSR +// OBSOLETE +// OBSOLETE mov %l0, %psr ! restore PSR +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! End of coprocessor handling stuff. +// OBSOLETE ! Update asr regs +// OBSOLETE +// OBSOLETE ld [%sp + (24 + 80) * 4], %l4 +// OBSOLETE wr %l4, %asr1 +// OBSOLETE ! ld [%sp + (24 + 81) * 4], %l4 ! can't write asr15 +// OBSOLETE ! wr %l4, %asr15 +// OBSOLETE ld [%sp + (24 + 82) * 4], %l4 +// OBSOLETE wr %l4, %asr17 +// OBSOLETE ld [%sp + (24 + 83) * 4], %l4 +// OBSOLETE wr %l4, %asr18 +// OBSOLETE ! ld [%sp + (24 + 84) * 4], %l4 ! can't write asr19 +// OBSOLETE ! wr %l4, %asr19 +// OBSOLETE ! ld [%sp + (24 + 85) * 4], %l4 ! can't write asr20 +// OBSOLETE ! wr %l4, %asr20 +// OBSOLETE ! ld [%sp + (24 + 86) * 4], %l4 ! can't write asr21 +// OBSOLETE ! wr %l4, %asr21 +// OBSOLETE ld [%sp + (24 + 87) * 4], %l4 +// OBSOLETE wr %l4, %asr22 +// OBSOLETE +// OBSOLETE ! End of restoring asr regs +// OBSOLETE +// OBSOLETE +// OBSOLETE ldd [%sp + (24 + 64) * 4], %l0 ! Y & PSR +// OBSOLETE ldd [%sp + (24 + 68) * 4], %l2 ! PC & NPC +// OBSOLETE +// OBSOLETE restore ! Ensure that previous window is valid +// OBSOLETE save %g0, %g0, %g0 ! by causing a window_underflow trap +// OBSOLETE +// OBSOLETE mov %l0, %y +// OBSOLETE mov %l1, %psr ! Make sure that traps are disabled +// OBSOLETE ! for rett +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE sethi %hi(in_trap_handler), %l4 +// OBSOLETE ld [%lo(in_trap_handler) + %l4], %l5 +// OBSOLETE dec %l5 +// OBSOLETE st %l5, [%lo(in_trap_handler) + %l4] +// OBSOLETE +// OBSOLETE jmpl %l2, %g0 ! Restore old PC +// OBSOLETE rett %l3 ! Restore old nPC +// OBSOLETE "); +// OBSOLETE +// OBSOLETE /* Convert ch from a hex digit to an int */ +// OBSOLETE +// OBSOLETE static int +// OBSOLETE hex (unsigned char ch) +// OBSOLETE { +// OBSOLETE if (ch >= 'a' && ch <= 'f') +// OBSOLETE return ch-'a'+10; +// OBSOLETE if (ch >= '0' && ch <= '9') +// OBSOLETE return ch-'0'; +// OBSOLETE if (ch >= 'A' && ch <= 'F') +// OBSOLETE return ch-'A'+10; +// OBSOLETE return -1; +// OBSOLETE } +// OBSOLETE +// OBSOLETE static char remcomInBuffer[BUFMAX]; +// OBSOLETE static char remcomOutBuffer[BUFMAX]; +// OBSOLETE +// OBSOLETE /* scan for the sequence $<data>#<checksum> */ +// OBSOLETE +// OBSOLETE unsigned char * +// OBSOLETE getpacket (void) +// OBSOLETE { +// OBSOLETE unsigned char *buffer = &remcomInBuffer[0]; +// OBSOLETE unsigned char checksum; +// OBSOLETE unsigned char xmitcsum; +// OBSOLETE int count; +// OBSOLETE char ch; +// OBSOLETE +// OBSOLETE while (1) +// OBSOLETE { +// OBSOLETE /* wait around for the start character, ignore all other characters */ +// OBSOLETE while ((ch = getDebugChar ()) != '$') +// OBSOLETE ; +// OBSOLETE +// OBSOLETE retry: +// OBSOLETE checksum = 0; +// OBSOLETE xmitcsum = -1; +// OBSOLETE count = 0; +// OBSOLETE +// OBSOLETE /* now, read until a # or end of buffer is found */ +// OBSOLETE while (count < BUFMAX) +// OBSOLETE { +// OBSOLETE ch = getDebugChar (); +// OBSOLETE if (ch == '$') +// OBSOLETE goto retry; +// OBSOLETE if (ch == '#') +// OBSOLETE break; +// OBSOLETE checksum = checksum + ch; +// OBSOLETE buffer[count] = ch; +// OBSOLETE count = count + 1; +// OBSOLETE } +// OBSOLETE buffer[count] = 0; +// OBSOLETE +// OBSOLETE if (ch == '#') +// OBSOLETE { +// OBSOLETE ch = getDebugChar (); +// OBSOLETE xmitcsum = hex (ch) << 4; +// OBSOLETE ch = getDebugChar (); +// OBSOLETE xmitcsum += hex (ch); +// OBSOLETE +// OBSOLETE if (checksum != xmitcsum) +// OBSOLETE { +// OBSOLETE putDebugChar ('-'); /* failed checksum */ +// OBSOLETE } +// OBSOLETE else +// OBSOLETE { +// OBSOLETE putDebugChar ('+'); /* successful transfer */ +// OBSOLETE +// OBSOLETE /* if a sequence char is present, reply the sequence ID */ +// OBSOLETE if (buffer[2] == ':') +// OBSOLETE { +// OBSOLETE putDebugChar (buffer[0]); +// OBSOLETE putDebugChar (buffer[1]); +// OBSOLETE +// OBSOLETE return &buffer[3]; +// OBSOLETE } +// OBSOLETE +// OBSOLETE return &buffer[0]; +// OBSOLETE } +// OBSOLETE } +// OBSOLETE } +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* send the packet in buffer. */ +// OBSOLETE +// OBSOLETE static void +// OBSOLETE putpacket (unsigned char *buffer) +// OBSOLETE { +// OBSOLETE unsigned char checksum; +// OBSOLETE int count; +// OBSOLETE unsigned char ch; +// OBSOLETE +// OBSOLETE /* $<packet info>#<checksum>. */ +// OBSOLETE do +// OBSOLETE { +// OBSOLETE putDebugChar('$'); +// OBSOLETE checksum = 0; +// OBSOLETE count = 0; +// OBSOLETE +// OBSOLETE while (ch = buffer[count]) +// OBSOLETE { +// OBSOLETE putDebugChar(ch); +// OBSOLETE checksum += ch; +// OBSOLETE count += 1; +// OBSOLETE } +// OBSOLETE +// OBSOLETE putDebugChar('#'); +// OBSOLETE putDebugChar(hexchars[checksum >> 4]); +// OBSOLETE putDebugChar(hexchars[checksum & 0xf]); +// OBSOLETE +// OBSOLETE } +// OBSOLETE while (getDebugChar() != '+'); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Indicate to caller of mem2hex or hex2mem that there has been an +// OBSOLETE error. */ +// OBSOLETE static volatile int mem_err = 0; +// OBSOLETE +// OBSOLETE /* Convert the memory pointed to by mem into hex, placing result in buf. +// OBSOLETE * Return a pointer to the last char put in buf (null), in case of mem fault, +// OBSOLETE * return 0. +// OBSOLETE * If MAY_FAULT is non-zero, then we will handle memory faults by returning +// OBSOLETE * a 0, else treat a fault like any other fault in the stub. +// OBSOLETE */ +// OBSOLETE +// OBSOLETE static unsigned char * +// OBSOLETE mem2hex (unsigned char *mem, unsigned char *buf, int count, int may_fault) +// OBSOLETE { +// OBSOLETE unsigned char ch; +// OBSOLETE +// OBSOLETE set_mem_fault_trap(may_fault); +// OBSOLETE +// OBSOLETE while (count-- > 0) +// OBSOLETE { +// OBSOLETE ch = *mem++; +// OBSOLETE if (mem_err) +// OBSOLETE return 0; +// OBSOLETE *buf++ = hexchars[ch >> 4]; +// OBSOLETE *buf++ = hexchars[ch & 0xf]; +// OBSOLETE } +// OBSOLETE +// OBSOLETE *buf = 0; +// OBSOLETE +// OBSOLETE set_mem_fault_trap(0); +// OBSOLETE +// OBSOLETE return buf; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* convert the hex array pointed to by buf into binary to be placed in mem +// OBSOLETE * return a pointer to the character AFTER the last byte written */ +// OBSOLETE +// OBSOLETE static char * +// OBSOLETE hex2mem (unsigned char *buf, unsigned char *mem, int count, int may_fault) +// OBSOLETE { +// OBSOLETE int i; +// OBSOLETE unsigned char ch; +// OBSOLETE +// OBSOLETE set_mem_fault_trap(may_fault); +// OBSOLETE +// OBSOLETE for (i=0; i<count; i++) +// OBSOLETE { +// OBSOLETE ch = hex(*buf++) << 4; +// OBSOLETE ch |= hex(*buf++); +// OBSOLETE *mem++ = ch; +// OBSOLETE if (mem_err) +// OBSOLETE return 0; +// OBSOLETE } +// OBSOLETE +// OBSOLETE set_mem_fault_trap(0); +// OBSOLETE +// OBSOLETE return mem; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* This table contains the mapping between SPARC hardware trap types, and +// OBSOLETE signals, which are primarily what GDB understands. It also indicates +// OBSOLETE which hardware traps we need to commandeer when initializing the stub. */ +// OBSOLETE +// OBSOLETE static struct hard_trap_info +// OBSOLETE { +// OBSOLETE unsigned char tt; /* Trap type code for SPARClite */ +// OBSOLETE unsigned char signo; /* Signal that we map this trap into */ +// OBSOLETE } hard_trap_info[] = { +// OBSOLETE {1, SIGSEGV}, /* instruction access exception */ +// OBSOLETE {0x3b, SIGSEGV}, /* instruction access error */ +// OBSOLETE {2, SIGILL}, /* illegal instruction */ +// OBSOLETE {3, SIGILL}, /* privileged instruction */ +// OBSOLETE {4, SIGEMT}, /* fp disabled */ +// OBSOLETE {0x24, SIGEMT}, /* cp disabled */ +// OBSOLETE {7, SIGBUS}, /* mem address not aligned */ +// OBSOLETE {0x29, SIGSEGV}, /* data access exception */ +// OBSOLETE {10, SIGEMT}, /* tag overflow */ +// OBSOLETE {128+1, SIGTRAP}, /* ta 1 - normal breakpoint instruction */ +// OBSOLETE {0, 0} /* Must be last */ +// OBSOLETE }; +// OBSOLETE +// OBSOLETE /* Set up exception handlers for tracing and breakpoints */ +// OBSOLETE +// OBSOLETE void +// OBSOLETE set_debug_traps (void) +// OBSOLETE { +// OBSOLETE struct hard_trap_info *ht; +// OBSOLETE +// OBSOLETE for (ht = hard_trap_info; ht->tt && ht->signo; ht++) +// OBSOLETE exceptionHandler(ht->tt, trap_low); +// OBSOLETE +// OBSOLETE initialized = 1; +// OBSOLETE } +// OBSOLETE +// OBSOLETE asm (" +// OBSOLETE ! Trap handler for memory errors. This just sets mem_err to be non-zero. It +// OBSOLETE ! assumes that %l1 is non-zero. This should be safe, as it is doubtful that +// OBSOLETE ! 0 would ever contain code that could mem fault. This routine will skip +// OBSOLETE ! past the faulting instruction after setting mem_err. +// OBSOLETE +// OBSOLETE .text +// OBSOLETE .align 4 +// OBSOLETE +// OBSOLETE _fltr_set_mem_err: +// OBSOLETE sethi %hi(_mem_err), %l0 +// OBSOLETE st %l1, [%l0 + %lo(_mem_err)] +// OBSOLETE jmpl %l2, %g0 +// OBSOLETE rett %l2+4 +// OBSOLETE "); +// OBSOLETE +// OBSOLETE static void +// OBSOLETE set_mem_fault_trap (int enable) +// OBSOLETE { +// OBSOLETE extern void fltr_set_mem_err(); +// OBSOLETE mem_err = 0; +// OBSOLETE +// OBSOLETE if (enable) +// OBSOLETE exceptionHandler(0x29, fltr_set_mem_err); +// OBSOLETE else +// OBSOLETE exceptionHandler(0x29, trap_low); +// OBSOLETE } +// OBSOLETE +// OBSOLETE asm (" +// OBSOLETE .text +// OBSOLETE .align 4 +// OBSOLETE +// OBSOLETE _dummy_hw_breakpoint: +// OBSOLETE jmpl %l2, %g0 +// OBSOLETE rett %l2+4 +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE "); +// OBSOLETE +// OBSOLETE static void +// OBSOLETE set_hw_breakpoint_trap (int enable) +// OBSOLETE { +// OBSOLETE extern void dummy_hw_breakpoint(); +// OBSOLETE +// OBSOLETE if (enable) +// OBSOLETE exceptionHandler(255, dummy_hw_breakpoint); +// OBSOLETE else +// OBSOLETE exceptionHandler(255, trap_low); +// OBSOLETE } +// OBSOLETE +// OBSOLETE static void +// OBSOLETE get_in_break_mode (void) +// OBSOLETE { +// OBSOLETE #if 0 +// OBSOLETE int x; +// OBSOLETE mesg("get_in_break_mode, sp = "); +// OBSOLETE phex(&x); +// OBSOLETE #endif +// OBSOLETE set_hw_breakpoint_trap(1); +// OBSOLETE +// OBSOLETE asm(" +// OBSOLETE sethi %hi(0xff10), %l4 +// OBSOLETE or %l4, %lo(0xff10), %l4 +// OBSOLETE sta %g0, [%l4]0x1 +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE "); +// OBSOLETE +// OBSOLETE set_hw_breakpoint_trap(0); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Convert the SPARC hardware trap type code to a unix signal number. */ +// OBSOLETE +// OBSOLETE static int +// OBSOLETE computeSignal (int tt) +// OBSOLETE { +// OBSOLETE struct hard_trap_info *ht; +// OBSOLETE +// OBSOLETE for (ht = hard_trap_info; ht->tt && ht->signo; ht++) +// OBSOLETE if (ht->tt == tt) +// OBSOLETE return ht->signo; +// OBSOLETE +// OBSOLETE return SIGHUP; /* default for things we don't know about */ +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* +// OBSOLETE * While we find nice hex chars, build an int. +// OBSOLETE * Return number of chars processed. +// OBSOLETE */ +// OBSOLETE +// OBSOLETE static int +// OBSOLETE hexToInt(char **ptr, int *intValue) +// OBSOLETE { +// OBSOLETE int numChars = 0; +// OBSOLETE int hexValue; +// OBSOLETE +// OBSOLETE *intValue = 0; +// OBSOLETE +// OBSOLETE while (**ptr) +// OBSOLETE { +// OBSOLETE hexValue = hex(**ptr); +// OBSOLETE if (hexValue < 0) +// OBSOLETE break; +// OBSOLETE +// OBSOLETE *intValue = (*intValue << 4) | hexValue; +// OBSOLETE numChars ++; +// OBSOLETE +// OBSOLETE (*ptr)++; +// OBSOLETE } +// OBSOLETE +// OBSOLETE return (numChars); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* +// OBSOLETE * This function does all command procesing for interfacing to gdb. It +// OBSOLETE * returns 1 if you should skip the instruction at the trap address, 0 +// OBSOLETE * otherwise. +// OBSOLETE */ +// OBSOLETE +// OBSOLETE static void +// OBSOLETE handle_exception (unsigned long *registers) +// OBSOLETE { +// OBSOLETE int tt; /* Trap type */ +// OBSOLETE int sigval; +// OBSOLETE int addr; +// OBSOLETE int length; +// OBSOLETE char *ptr; +// OBSOLETE unsigned long *sp; +// OBSOLETE unsigned long dsr; +// OBSOLETE +// OBSOLETE /* First, we must force all of the windows to be spilled out */ +// OBSOLETE +// OBSOLETE asm(" +// OBSOLETE ! Ugh. sparclet has broken save +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE !save %sp, -64, %sp +// OBSOLETE save +// OBSOLETE add %fp,-64,%sp +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE restore +// OBSOLETE "); +// OBSOLETE +// OBSOLETE if (registers[PC] == (unsigned long)breakinst) +// OBSOLETE { +// OBSOLETE registers[PC] = registers[NPC]; +// OBSOLETE registers[NPC] += 4; +// OBSOLETE } +// OBSOLETE sp = (unsigned long *)registers[SP]; +// OBSOLETE +// OBSOLETE tt = (registers[TBR] >> 4) & 0xff; +// OBSOLETE +// OBSOLETE /* reply to host that an exception has occurred */ +// OBSOLETE sigval = computeSignal(tt); +// OBSOLETE ptr = remcomOutBuffer; +// OBSOLETE +// OBSOLETE *ptr++ = 'T'; +// OBSOLETE *ptr++ = hexchars[sigval >> 4]; +// OBSOLETE *ptr++ = hexchars[sigval & 0xf]; +// OBSOLETE +// OBSOLETE *ptr++ = hexchars[PC >> 4]; +// OBSOLETE *ptr++ = hexchars[PC & 0xf]; +// OBSOLETE *ptr++ = ':'; +// OBSOLETE ptr = mem2hex((char *)®isters[PC], ptr, 4, 0); +// OBSOLETE *ptr++ = ';'; +// OBSOLETE +// OBSOLETE *ptr++ = hexchars[FP >> 4]; +// OBSOLETE *ptr++ = hexchars[FP & 0xf]; +// OBSOLETE *ptr++ = ':'; +// OBSOLETE ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */ +// OBSOLETE *ptr++ = ';'; +// OBSOLETE +// OBSOLETE *ptr++ = hexchars[SP >> 4]; +// OBSOLETE *ptr++ = hexchars[SP & 0xf]; +// OBSOLETE *ptr++ = ':'; +// OBSOLETE ptr = mem2hex((char *)&sp, ptr, 4, 0); +// OBSOLETE *ptr++ = ';'; +// OBSOLETE +// OBSOLETE *ptr++ = hexchars[NPC >> 4]; +// OBSOLETE *ptr++ = hexchars[NPC & 0xf]; +// OBSOLETE *ptr++ = ':'; +// OBSOLETE ptr = mem2hex((char *)®isters[NPC], ptr, 4, 0); +// OBSOLETE *ptr++ = ';'; +// OBSOLETE +// OBSOLETE *ptr++ = hexchars[O7 >> 4]; +// OBSOLETE *ptr++ = hexchars[O7 & 0xf]; +// OBSOLETE *ptr++ = ':'; +// OBSOLETE ptr = mem2hex((char *)®isters[O7], ptr, 4, 0); +// OBSOLETE *ptr++ = ';'; +// OBSOLETE +// OBSOLETE *ptr++ = 0; +// OBSOLETE +// OBSOLETE putpacket(remcomOutBuffer); +// OBSOLETE +// OBSOLETE while (1) +// OBSOLETE { +// OBSOLETE remcomOutBuffer[0] = 0; +// OBSOLETE +// OBSOLETE ptr = getpacket(); +// OBSOLETE switch (*ptr++) +// OBSOLETE { +// OBSOLETE case '?': +// OBSOLETE remcomOutBuffer[0] = 'S'; +// OBSOLETE remcomOutBuffer[1] = hexchars[sigval >> 4]; +// OBSOLETE remcomOutBuffer[2] = hexchars[sigval & 0xf]; +// OBSOLETE remcomOutBuffer[3] = 0; +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'd': +// OBSOLETE remote_debug = !(remote_debug); /* toggle debug flag */ +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'g': /* return the value of the CPU registers */ +// OBSOLETE { +// OBSOLETE ptr = remcomOutBuffer; +// OBSOLETE ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */ +// OBSOLETE ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */ +// OBSOLETE memset(ptr, '0', 32 * 8); /* Floating point */ +// OBSOLETE ptr = mem2hex((char *)®isters[Y], +// OBSOLETE ptr + 32 * 4 * 2, +// OBSOLETE 8 * 4, +// OBSOLETE 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */ +// OBSOLETE ptr = mem2hex((char *)®isters[CCSR], +// OBSOLETE ptr, +// OBSOLETE 8 * 4, +// OBSOLETE 0); /* CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR */ +// OBSOLETE ptr = mem2hex((char *)®isters[ASR1], +// OBSOLETE ptr, +// OBSOLETE 8 * 4, +// OBSOLETE 0); /* ASR1,ASR15,ASR17,ASR18,ASR19,ASR20,ASR21,ASR22 */ +// OBSOLETE #if 0 /* not implemented */ +// OBSOLETE ptr = mem2hex((char *) ®isters[AWR0], +// OBSOLETE ptr, +// OBSOLETE 32 * 4, +// OBSOLETE 0); /* Alternate Window Registers */ +// OBSOLETE #endif +// OBSOLETE } +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'G': /* set value of all the CPU registers - return OK */ +// OBSOLETE case 'P': /* set value of one CPU register - return OK */ +// OBSOLETE { +// OBSOLETE unsigned long *newsp, psr; +// OBSOLETE +// OBSOLETE psr = registers[PSR]; +// OBSOLETE +// OBSOLETE if (ptr[-1] == 'P') /* do a single register */ +// OBSOLETE { +// OBSOLETE int regno; +// OBSOLETE +// OBSOLETE if (hexToInt (&ptr, ®no) +// OBSOLETE && *ptr++ == '=') +// OBSOLETE if (regno >= L0 && regno <= I7) +// OBSOLETE hex2mem (ptr, sp + regno - L0, 4, 0); +// OBSOLETE else +// OBSOLETE hex2mem (ptr, (char *)®isters[regno], 4, 0); +// OBSOLETE else +// OBSOLETE { +// OBSOLETE strcpy (remcomOutBuffer, "E01"); +// OBSOLETE break; +// OBSOLETE } +// OBSOLETE } +// OBSOLETE else +// OBSOLETE { +// OBSOLETE hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */ +// OBSOLETE hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */ +// OBSOLETE hex2mem(ptr + 64 * 4 * 2, (char *)®isters[Y], +// OBSOLETE 8 * 4, 0); /* Y,PSR,WIM,TBR,PC,NPC,FPSR,CPSR */ +// OBSOLETE hex2mem(ptr + 72 * 4 * 2, (char *)®isters[CCSR], +// OBSOLETE 8 * 4, 0); /* CCSR,CCPR,CCCRCR,CCOR,CCOBR,CCIBR,CCIR */ +// OBSOLETE hex2mem(ptr + 80 * 4 * 2, (char *)®isters[ASR1], +// OBSOLETE 8 * 4, 0); /* ASR1 ... ASR22 */ +// OBSOLETE #if 0 /* not implemented */ +// OBSOLETE hex2mem(ptr + 88 * 4 * 2, (char *)®isters[AWR0], +// OBSOLETE 8 * 4, 0); /* Alternate Window Registers */ +// OBSOLETE #endif +// OBSOLETE } +// OBSOLETE /* See if the stack pointer has moved. If so, then copy the saved +// OBSOLETE locals and ins to the new location. This keeps the window +// OBSOLETE overflow and underflow routines happy. */ +// OBSOLETE +// OBSOLETE newsp = (unsigned long *)registers[SP]; +// OBSOLETE if (sp != newsp) +// OBSOLETE sp = memcpy(newsp, sp, 16 * 4); +// OBSOLETE +// OBSOLETE /* Don't allow CWP to be modified. */ +// OBSOLETE +// OBSOLETE if (psr != registers[PSR]) +// OBSOLETE registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f); +// OBSOLETE +// OBSOLETE strcpy(remcomOutBuffer,"OK"); +// OBSOLETE } +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ +// OBSOLETE /* Try to read %x,%x. */ +// OBSOLETE +// OBSOLETE if (hexToInt(&ptr, &addr) +// OBSOLETE && *ptr++ == ',' +// OBSOLETE && hexToInt(&ptr, &length)) +// OBSOLETE { +// OBSOLETE if (mem2hex((char *)addr, remcomOutBuffer, length, 1)) +// OBSOLETE break; +// OBSOLETE +// OBSOLETE strcpy (remcomOutBuffer, "E03"); +// OBSOLETE } +// OBSOLETE else +// OBSOLETE strcpy(remcomOutBuffer,"E01"); +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */ +// OBSOLETE /* Try to read '%x,%x:'. */ +// OBSOLETE +// OBSOLETE if (hexToInt(&ptr, &addr) +// OBSOLETE && *ptr++ == ',' +// OBSOLETE && hexToInt(&ptr, &length) +// OBSOLETE && *ptr++ == ':') +// OBSOLETE { +// OBSOLETE if (hex2mem(ptr, (char *)addr, length, 1)) +// OBSOLETE strcpy(remcomOutBuffer, "OK"); +// OBSOLETE else +// OBSOLETE strcpy(remcomOutBuffer, "E03"); +// OBSOLETE } +// OBSOLETE else +// OBSOLETE strcpy(remcomOutBuffer, "E02"); +// OBSOLETE break; +// OBSOLETE +// OBSOLETE case 'c': /* cAA..AA Continue at address AA..AA(optional) */ +// OBSOLETE /* try to read optional parameter, pc unchanged if no parm */ +// OBSOLETE +// OBSOLETE if (hexToInt(&ptr, &addr)) +// OBSOLETE { +// OBSOLETE registers[PC] = addr; +// OBSOLETE registers[NPC] = addr + 4; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Need to flush the instruction cache here, as we may have deposited a +// OBSOLETE breakpoint, and the icache probably has no way of knowing that a data ref to +// OBSOLETE some location may have changed something that is in the instruction cache. +// OBSOLETE */ +// OBSOLETE +// OBSOLETE flush_i_cache(); +// OBSOLETE return; +// OBSOLETE +// OBSOLETE /* kill the program */ +// OBSOLETE case 'k' : /* do nothing */ +// OBSOLETE break; +// OBSOLETE #if 0 +// OBSOLETE case 't': /* Test feature */ +// OBSOLETE asm (" std %f30,[%sp]"); +// OBSOLETE break; +// OBSOLETE #endif +// OBSOLETE case 'r': /* Reset */ +// OBSOLETE asm ("call 0 +// OBSOLETE nop "); +// OBSOLETE break; +// OBSOLETE } /* switch */ +// OBSOLETE +// OBSOLETE /* reply to the request */ +// OBSOLETE putpacket(remcomOutBuffer); +// OBSOLETE } +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* This function will generate a breakpoint exception. It is used at the +// OBSOLETE beginning of a program to sync up with a debugger and can be used +// OBSOLETE otherwise as a quick means to stop program execution and "break" into +// OBSOLETE the debugger. */ +// OBSOLETE +// OBSOLETE void +// OBSOLETE breakpoint (void) +// OBSOLETE { +// OBSOLETE if (!initialized) +// OBSOLETE return; +// OBSOLETE +// OBSOLETE asm(" .globl _breakinst +// OBSOLETE +// OBSOLETE _breakinst: ta 1 +// OBSOLETE "); +// OBSOLETE } +// OBSOLETE +// OBSOLETE static void +// OBSOLETE hw_breakpoint (void) +// OBSOLETE { +// OBSOLETE asm(" +// OBSOLETE ta 127 +// OBSOLETE "); +// OBSOLETE } +// OBSOLETE +// OBSOLETE #if 0 /* experimental and never finished, left here for reference */ +// OBSOLETE static void +// OBSOLETE splet_temp(void) +// OBSOLETE { +// OBSOLETE asm(" sub %sp,(16+1+6+1+121)*4,%sp ! Make room for input & locals +// OBSOLETE ! + hidden arg + arg spill +// OBSOLETE ! + doubleword alignment +// OBSOLETE ! + registers[121] +// OBSOLETE +// OBSOLETE ! Leave a trail of breadcrumbs! (save register save area for debugging) +// OBSOLETE mov %sp, %l0 +// OBSOLETE add %l0, 24*4, %l0 +// OBSOLETE sethi %hi(_debug_registers), %l1 +// OBSOLETE st %l0, [%lo(_debug_registers) + %l1] +// OBSOLETE +// OBSOLETE ! Save the Alternate Register Set: (not implemented yet) +// OBSOLETE ! To save the Alternate Register set, we must: +// OBSOLETE ! 1) Save the current SP in some global location. +// OBSOLETE ! 2) Swap the register sets. +// OBSOLETE ! 3) Save the Alternate SP in the Y register +// OBSOLETE ! 4) Fetch the SP that we saved in step 1. +// OBSOLETE ! 5) Use that to save the rest of the regs (not forgetting ASP in Y) +// OBSOLETE ! 6) Restore the Alternate SP from Y +// OBSOLETE ! 7) Swap the registers back. +// OBSOLETE +// OBSOLETE ! 1) Copy the current stack pointer to global _SAVED_STACK_POINTER: +// OBSOLETE sethi %hi(_saved_stack_pointer), %l0 +// OBSOLETE st %sp, [%lo(_saved_stack_pointer) + %l0] +// OBSOLETE +// OBSOLETE ! 2) Swap the register sets: +// OBSOLETE mov %psr, %l1 +// OBSOLETE sethi %hi(0x10000), %l2 +// OBSOLETE xor %l1, %l2, %l1 +// OBSOLETE mov %l1, %psr +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE +// OBSOLETE ! 3) Save Alternate L0 in Y +// OBSOLETE wr %l0, 0, %y +// OBSOLETE +// OBSOLETE ! 4) Load former SP into alternate SP, using L0 +// OBSOLETE sethi %hi(_saved_stack_pointer), %l0 +// OBSOLETE or %lo(_saved_stack_pointer), %l0, %l0 +// OBSOLETE swap [%l0], %sp +// OBSOLETE +// OBSOLETE ! 4.5) Restore alternate L0 +// OBSOLETE rd %y, %l0 +// OBSOLETE +// OBSOLETE ! 5) Save the Alternate Window Registers +// OBSOLETE st %r0, [%sp + (24 + 88) * 4] ! AWR0 +// OBSOLETE st %r1, [%sp + (24 + 89) * 4] ! AWR1 +// OBSOLETE st %r2, [%sp + (24 + 90) * 4] ! AWR2 +// OBSOLETE st %r3, [%sp + (24 + 91) * 4] ! AWR3 +// OBSOLETE st %r4, [%sp + (24 + 92) * 4] ! AWR4 +// OBSOLETE st %r5, [%sp + (24 + 93) * 4] ! AWR5 +// OBSOLETE st %r6, [%sp + (24 + 94) * 4] ! AWR6 +// OBSOLETE st %r7, [%sp + (24 + 95) * 4] ! AWR7 +// OBSOLETE st %r8, [%sp + (24 + 96) * 4] ! AWR8 +// OBSOLETE st %r9, [%sp + (24 + 97) * 4] ! AWR9 +// OBSOLETE st %r10, [%sp + (24 + 98) * 4] ! AWR10 +// OBSOLETE st %r11, [%sp + (24 + 99) * 4] ! AWR11 +// OBSOLETE st %r12, [%sp + (24 + 100) * 4] ! AWR12 +// OBSOLETE st %r13, [%sp + (24 + 101) * 4] ! AWR13 +// OBSOLETE ! st %r14, [%sp + (24 + 102) * 4] ! AWR14 (SP) +// OBSOLETE st %r15, [%sp + (24 + 103) * 4] ! AWR15 +// OBSOLETE st %r16, [%sp + (24 + 104) * 4] ! AWR16 +// OBSOLETE st %r17, [%sp + (24 + 105) * 4] ! AWR17 +// OBSOLETE st %r18, [%sp + (24 + 106) * 4] ! AWR18 +// OBSOLETE st %r19, [%sp + (24 + 107) * 4] ! AWR19 +// OBSOLETE st %r20, [%sp + (24 + 108) * 4] ! AWR20 +// OBSOLETE st %r21, [%sp + (24 + 109) * 4] ! AWR21 +// OBSOLETE st %r22, [%sp + (24 + 110) * 4] ! AWR22 +// OBSOLETE st %r23, [%sp + (24 + 111) * 4] ! AWR23 +// OBSOLETE st %r24, [%sp + (24 + 112) * 4] ! AWR24 +// OBSOLETE st %r25, [%sp + (24 + 113) * 4] ! AWR25 +// OBSOLETE st %r26, [%sp + (24 + 114) * 4] ! AWR26 +// OBSOLETE st %r27, [%sp + (24 + 115) * 4] ! AWR27 +// OBSOLETE st %r28, [%sp + (24 + 116) * 4] ! AWR28 +// OBSOLETE st %r29, [%sp + (24 + 117) * 4] ! AWR29 +// OBSOLETE st %r30, [%sp + (24 + 118) * 4] ! AWR30 +// OBSOLETE st %r31, [%sp + (24 + 119) * 4] ! AWR21 +// OBSOLETE +// OBSOLETE ! Get the Alternate PSR (I hope...) +// OBSOLETE +// OBSOLETE rd %psr, %l2 +// OBSOLETE st %l2, [%sp + (24 + 120) * 4] ! APSR +// OBSOLETE +// OBSOLETE ! Don't forget the alternate stack pointer +// OBSOLETE +// OBSOLETE rd %y, %l3 +// OBSOLETE st %l3, [%sp + (24 + 102) * 4] ! AWR14 (SP) +// OBSOLETE +// OBSOLETE ! 6) Restore the Alternate SP (saved in Y) +// OBSOLETE +// OBSOLETE rd %y, %o6 +// OBSOLETE +// OBSOLETE +// OBSOLETE ! 7) Swap the registers back: +// OBSOLETE +// OBSOLETE mov %psr, %l1 +// OBSOLETE sethi %hi(0x10000), %l2 +// OBSOLETE xor %l1, %l2, %l1 +// OBSOLETE mov %l1, %psr +// OBSOLETE nop ! 3 nops after write to %psr (needed?) +// OBSOLETE nop +// OBSOLETE nop +// OBSOLETE "); +// OBSOLETE } +// OBSOLETE +// OBSOLETE #endif |