diff options
Diffstat (limited to 'gdb/remote-hms.c')
| -rw-r--r-- | gdb/remote-hms.c | 1341 |
1 files changed, 1 insertions, 1340 deletions
diff --git a/gdb/remote-hms.c b/gdb/remote-hms.c index 328fc01..5e66464 100644 --- a/gdb/remote-hms.c +++ b/gdb/remote-hms.c @@ -1,5 +1,5 @@ /* Remote debugging interface for Hitachi HMS Monitor Version 1.0 - Copyright 1995 Free Software Foundation, Inc. + Copyright 1995,1999 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by Steve Chamberlain (sac@cygnus.com). @@ -159,1342 +159,3 @@ Specify the serial device it is connected to (e.g. /dev/ttya)."; write_dos_tick_delay = 1; add_target (&hms_ops); } - -#if 0 -/* This is kept here because we used to support the H8/500 in this module, - and I haven't done the H8/500 yet */ -#include "defs.h" -#include "inferior.h" -#include "wait.h" -#include "value.h" -#include "gdb_string.h" -#include <ctype.h> -#include <fcntl.h> -#include <signal.h> -#include <setjmp.h> -#include <errno.h> -#include "terminal.h" -#include "target.h" -#include "gdbcore.h" -#include "serial.h" -#include "remote-utils.h" -/* External data declarations */ -extern int stop_soon_quietly; /* for wait_for_inferior */ - -/* Forward data declarations */ -extern struct target_ops hms_ops; /* Forward declaration */ - -/* Forward function declarations */ -static void hms_fetch_registers (); -static int hms_store_registers (); -static void hms_close (); -static int hms_clear_breakpoints (); - -extern struct target_ops hms_ops; -static void hms_drain (); -static void add_commands (); -static void remove_commands (); - -static int quiet = 1; /* FIXME - can be removed after Dec '94 */ - - - -/*********************************************************************** - * I/O stuff stolen from remote-eb.c - ***********************************************************************/ - -static int timeout = 2; - -static const char *dev_name; - -/* Descriptor for I/O to remote machine. Initialize it to -1 so that - hms_open knows that we don't have a file open when the program - starts. */ - -static int before = 0xdead; -static int is_open = 0; -static int after = 0xdead; -int -check_open () -{ - if (before != 0xdead - || after != 0xdead) - printf ("OUTCH! \n"); - if (!is_open) - { - error ("remote device not open"); - } -} - -#define ON 1 -#define OFF 0 - -/* Read a character from the remote system, doing all the fancy - timeout stuff. */ -static int -readchar () -{ - int buf; - - buf = SERIAL_READCHAR (desc, timeout); - - if (buf == SERIAL_TIMEOUT) - { - hms_write (".\r\n", 3); - error ("Timeout reading from remote system."); - } - if (buf == SERIAL_ERROR) - { - error ("Serial port error!"); - } - - if (!quiet || remote_debug) - printf_unfiltered ("%c", buf); - - return buf & 0x7f; -} - -static void -flush () -{ - while (1) - { - int b = SERIAL_READCHAR (desc, 0); - if (b == SERIAL_TIMEOUT) - return; - } -} - -static int -readchar_nofail () -{ - int buf; - - buf = SERIAL_READCHAR (desc, timeout); - if (buf == SERIAL_TIMEOUT) - buf = 0; - if (!quiet || remote_debug) - printf_unfiltered ("%c", buf); - - return buf & 0x7f; - -} - -/* Keep discarding input from the remote system, until STRING is found. - Let the user break out immediately. */ -static void -expect (string) - char *string; -{ - char *p = string; - char c; - immediate_quit = 1; - while (1) - { - c = readchar (); - if (c == *p) - { - p++; - if (*p == '\0') - { - immediate_quit = 0; - return; - } - } - else - { - p = string; - if (c == *p) - p++; - } - } -} - -/* Keep discarding input until we see the hms prompt. - - The convention for dealing with the prompt is that you - o give your command - o *then* wait for the prompt. - - Thus the last thing that a procedure does with the serial line - will be an expect_prompt(). Exception: hms_resume does not - wait for the prompt, because the terminal is being handed over - to the inferior. However, the next thing which happens after that - is a hms_wait which does wait for the prompt. - Note that this includes abnormal exit, e.g. error(). This is - necessary to prevent getting into states from which we can't - recover. */ -static void -expect_prompt () -{ - expect ("HMS>"); -} - -/* Get a hex digit from the remote system & return its value. - If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ -static int -get_hex_digit (ignore_space) - int ignore_space; -{ - int ch; - - while (1) - { - ch = readchar (); - if (ch >= '0' && ch <= '9') - return ch - '0'; - else if (ch >= 'A' && ch <= 'F') - return ch - 'A' + 10; - else if (ch >= 'a' && ch <= 'f') - return ch - 'a' + 10; - else if (ch == ' ' && ignore_space) - ; - else - { - expect_prompt (); - error ("Invalid hex digit from remote system."); - } - } -} - -/* Get a byte from hms_desc and put it in *BYT. Accept any number - leading spaces. */ -static void -get_hex_byte (byt) - char *byt; -{ - int val; - - val = get_hex_digit (1) << 4; - val |= get_hex_digit (0); - *byt = val; -} - -/* Read a 32-bit hex word from the hms, preceded by a space */ -static long -get_hex_word () -{ - long val; - int j; - - val = 0; - for (j = 0; j < 8; j++) - val = (val << 4) + get_hex_digit (j == 0); - return val; -} - -/* Called when SIGALRM signal sent due to alarm() timeout. */ - -/* Number of SIGTRAPs we need to simulate. That is, the next - NEED_ARTIFICIAL_TRAP calls to hms_wait should just return - SIGTRAP without actually waiting for anything. */ - -static int need_artificial_trap = 0; - -void -hms_kill (arg, from_tty) - char *arg; - int from_tty; -{ - -} - -/* This is called not only when we first attach, but also when the - user types "run" after having attached. */ -void -hms_create_inferior (execfile, args, env) - char *execfile; - char *args; - char **env; -{ - int entry_pt; - char buffer[100]; - - if (args && *args) - error ("Can't pass arguments to remote hms process."); - - if (execfile == 0 || exec_bfd == 0) - error ("No executable file specified"); - - entry_pt = (int) bfd_get_start_address (exec_bfd); - check_open (); - - hms_kill (NULL, NULL); - hms_clear_breakpoints (); - init_wait_for_inferior (); - hms_write_cr (""); - expect_prompt (); - - insert_breakpoints (); /* Needed to get correct instruction in cache */ - proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0); -} - -/* Open a connection to a remote debugger. - NAME is the filename used for communication, then a space, - then the baud rate. - */ - -static char * -find_end_of_word (s) - char *s; -{ - while (*s && !isspace (*s)) - s++; - return s; -} - -static char * -get_word (p) - char **p; -{ - char *s = *p; - char *word; - char *copy; - size_t len; - - while (isspace (*s)) - s++; - - word = s; - - len = 0; - - while (*s && !isspace (*s)) - { - s++; - len++; - - } - copy = xmalloc (len + 1); - memcpy (copy, word, len); - copy[len] = 0; - *p = s; - return copy; -} - -static int baudrate = 9600; - -static int -is_baudrate_right () -{ - int ok; - - /* Put this port into NORMAL mode, send the 'normal' character */ - - hms_write ("\001", 1); /* Control A */ - hms_write ("\r\n", 2); /* Cr */ - - while (1) - { - ok = SERIAL_READCHAR (desc, timeout); - if (ok < 0) - break; - } - - hms_write ("r", 1); - - if (readchar_nofail () == 'r') - return 1; - - /* Not the right baudrate, or the board's not on */ - return 0; -} -static void -set_rate () -{ - if (!SERIAL_SETBAUDRATE (desc, baudrate)) - error ("Can't set baudrate"); -} - - - -/* Close out all files and local state before this target loses control. */ - -static void -hms_close (quitting) - int quitting; -{ - /* Clear any break points */ - remove_commands (); - hms_clear_breakpoints (); - sleep (1); /* Let any output make it all the way back */ - if (is_open) - { - SERIAL_WRITE (desc, "R\r\n", 3); - SERIAL_CLOSE (desc); - } - is_open = 0; -} - -/* Terminate the open connection to the remote debugger. Use this - when you want to detach and do something else with your gdb. */ void -hms_detach (args, from_tty) - char *args; - int from_tty; -{ - if (is_open) - { - hms_clear_breakpoints (); - } - - pop_target (); /* calls hms_close to do the real work - */ - if (from_tty) - printf_filtered ("Ending remote %s debugging\n", - target_shortname); -} - -/* Tell the remote machine to resume. */ - -void -hms_resume (pid, step, sig) - int pid, step; - enum target_signal - sig; -{ - if (step) - { - hms_write_cr ("s"); - expect ("Step>"); - - /* Force the next hms_wait to return a trap. Not doing anything - about I/O from the target means that the user has to type "continue" - to see any. FIXME, this should be fixed. */ - need_artificial_trap = 1; - } - else - { - hms_write_cr ("g"); - expect ("g"); - } -} - -/* Wait until the remote machine stops, then return, storing status in - STATUS just as `wait' would. */ - -int -hms_wait (pid, status) - int pid; - struct target_waitstatus *status; -{ - /* Strings to look for. '?' means match any single character. Note - that with the algorithm we use, the initial character of the string - cannot recur in the string, or we will not find some cases of the - string in the input. */ - - static char bpt[] = "At breakpoint:"; - - /* It would be tempting to look for "\n[__exit + 0x8]\n" but that - requires loading symbols with "yc i" and even if we did do that we - don't know that the file has symbols. */ - static char exitmsg[] = "HMS>"; - char *bp = bpt; - char *ep = exitmsg; - - /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars. - */ - char swallowed[50]; - - /* Current position in swallowed. */ - char *swallowed_p = swallowed; - - int ch; - int ch_handled; - int old_timeout = timeout; - int - old_immediate_quit = immediate_quit; - int swallowed_cr = 0; - - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = 0; - - if (need_artificial_trap != 0) - { - status->kind = - TARGET_WAITKIND_STOPPED; - status->value.sig = TARGET_SIGNAL_TRAP; - need_artificial_trap--; - return 0; - } - - timeout = 5; /* Don't time out for a while - user program is running. - */ - immediate_quit = 1; /* Helps ability to QUIT */ - while (1) - { - QUIT; /* Let user quit and leave process running */ - ch_handled = 0; - ch = readchar (); - if (ch == *bp) - { - bp++; - if (*bp == '\0') - break; - ch_handled = 1; - - *swallowed_p++ = ch; - } - else - { - bp = bpt; - } - if - (ch == *ep || *ep == '?') - { - ep++; - if (*ep == '\0') - break; - - if (!ch_handled) - *swallowed_p++ = ch; - ch_handled = - 1; - } - else - { - ep = exitmsg; - } - - if (!ch_handled) - { - char *p; - - /* Print out any characters which have been swallowed. */ - for (p = swallowed; p < swallowed_p; ++p) - putchar_unfiltered (*p); - swallowed_p = swallowed; - - if ((ch != '\r' && ch != '\n') || swallowed_cr > 10) - { - putchar_unfiltered (ch); - swallowed_cr = 10; - } - swallowed_cr++; - - } - } - if (*bp == '\0') - { - status->kind = TARGET_WAITKIND_STOPPED; - status->value.sig = TARGET_SIGNAL_TRAP; - expect_prompt (); - } - else - { - status->kind = TARGET_WAITKIND_EXITED; - status->value.integer = - TARGET_SIGNAL_STOP; - } - - timeout = old_timeout; - immediate_quit = old_immediate_quit; - return - 0; -} - -/* Return the name of register number REGNO in the form input and - output by hms. - - Returns a pointer to a static buffer containing the answer. */ -static char * -get_reg_name (regno) - int regno; -{ - static char *rn[] = - REGISTER_NAMES; - - return rn[regno]; -} - -/* Read the remote registers. */ - -static int -gethex (length, start, ok) - unsigned int length; - char *start; - int *ok; -{ - int result = 0; - - while (length--) - { - result <<= 4; - if (*start >= 'a' && *start <= 'f') - { - result += *start - 'a' + 10; - } - else if (*start >= 'A' && - *start <= 'F') - { - result += *start - 'A' + 10; - } - else if - (*start >= '0' && *start <= '9') - { - result += *start - '0'; - } - else - *ok = 0; - start++; - - } - return result; -} -static int -timed_read (buf, n, timeout) - char - *buf; - -{ - int i; - char c; - - i = 0; - while (i < n) - { - c = readchar (); - - if (c == 0) - return i; - buf[i] = c; - i++; - - } - return i; -} - -hms_write (a, l) - char *a; -{ - int i; - - SERIAL_WRITE (desc, a, l); - - if (!quiet || remote_debug) - { - printf_unfiltered ("<"); - for (i = 0; i < l; i++) - { - printf_unfiltered ("%c", a[i]); - } - printf_unfiltered (">"); - } -} - -hms_write_cr (s) - char *s; -{ - hms_write (s, strlen (s)); - hms_write ("\r\n", 2); -} - -#ifdef GDB_TARGET_IS_H8500 - -/* H8/500 monitor reg dump looks like: - - HMS>r - PC:8000 SR:070C .7NZ.. CP:00 DP:00 EP:00 TP:00 BR:00 - R0-R7: FF5A 0001 F4FE F500 0000 F528 F528 F4EE - HMS> - - - */ - -supply_val (n, size, ptr, segptr) - int n; - int size; - char *ptr; - char *segptr; -{ - int ok; - char raw[4]; - switch (size) - { - case 2: - raw[0] = gethex (2, ptr, &ok); - raw[1] = gethex (2, ptr + 2, &ok); - supply_register (n, raw); - break; - case 1: - raw[0] = gethex (2, ptr, &ok); - supply_register (n, raw); - break; - case 4: - { - int v = gethex (4, ptr, &ok); - v |= gethex (2, segptr, &ok) << 16; - raw[0] = 0; - raw[1] = (v >> 16) & 0xff; - raw[2] = (v >> 8) & 0xff; - raw[3] = (v >> 0) & 0xff; - supply_register (n, raw); - } - } - -} -static void -hms_fetch_register (dummy) - int dummy; -{ -#define REGREPLY_SIZE 108 - char linebuf[REGREPLY_SIZE + 1]; - int i; - int s; - int gottok; - - LONGEST reg[NUM_REGS]; - check_open (); - - do - { - - hms_write_cr ("r"); - expect ("r"); - s = timed_read (linebuf + 1, REGREPLY_SIZE, 1); - - linebuf[REGREPLY_SIZE] = 0; - gottok = 0; - if (linebuf[3] == 'P' && - linebuf[4] == 'C' && - linebuf[5] == ':' && - linebuf[105] == 'H' && - linebuf[106] == 'M' && - linebuf[107] == 'S') - { - - /* - 012 - r** - -------1---------2---------3---------4---------5----- - 345678901234567890123456789012345678901234567890123456 - PC:8000 SR:070C .7NZ.. CP:00 DP:00 EP:00 TP:00 BR:00** - ---6---------7---------8---------9--------10---- - 789012345678901234567890123456789012345678901234 - R0-R7: FF5A 0001 F4FE F500 0000 F528 F528 F4EE** - - 56789 - HMS> - */ - gottok = 1; - - - supply_val (PC_REGNUM, 4, linebuf + 6, linebuf + 29); - - supply_val (CCR_REGNUM, 2, linebuf + 14); - supply_val (SEG_C_REGNUM, 1, linebuf + 29); - supply_val (SEG_D_REGNUM, 1, linebuf + 35); - supply_val (SEG_E_REGNUM, 1, linebuf + 41); - supply_val (SEG_T_REGNUM, 1, linebuf + 47); - for (i = 0; i < 8; i++) - { - static int sr[8] = - {35, 35, 35, 35, - 41, 41, 47, 47}; - - char raw[4]; - char *src = linebuf + 64 + 5 * i; - char *segsrc = linebuf + sr[i]; - supply_val (R0_REGNUM + i, 2, src); - supply_val (PR0_REGNUM + i, 4, src, segsrc); - } - } - if (!gottok) - { - hms_write_cr (""); - expect ("HMS>"); - } - } - while (!gottok); -} -#endif - -#ifdef GDB_TARGET_IS_H8300 -static void -hms_fetch_register (dummy) - int dummy; -{ -#define REGREPLY_SIZE 79 - char linebuf[REGREPLY_SIZE + 1]; - int i; - int s; - int gottok; - - ULONGEST reg[NUM_REGS]; - - check_open (); - - do - { - hms_write_cr ("r"); - - s = timed_read (linebuf, 1, 1); - - while (linebuf[0] != 'r') - s = timed_read (linebuf, 1, 1); - - s = timed_read (linebuf + 1, REGREPLY_SIZE - 1, 1); - - linebuf[REGREPLY_SIZE] = 0; - gottok = 0; - if (linebuf[0] == 'r' && - linebuf[3] == 'P' && - linebuf[4] == 'C' && - linebuf[5] == '=' && - linebuf[75] == 'H' && - linebuf[76] == 'M' && - linebuf[77] == 'S') - { - /* - PC=XXXX CCR=XX:XXXXXXXX R0-R7= XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX - 5436789012345678901234567890123456789012345678901234567890123456789012 - 0 1 2 3 4 5 6 - */ - gottok = 1; - - reg[PC_REGNUM] = gethex (4, linebuf + 6, &gottok); - reg[CCR_REGNUM] = gethex (2, linebuf + 15, &gottok); - for (i = 0; i < 8; i++) - { - reg[i] = gethex (4, linebuf + 34 + 5 * i, &gottok); - } - } - } - while (!gottok); - for (i = 0; i < NUM_REGS; i++) - { - char swapped[2]; - - swapped[1] = reg[i]; - swapped[0] = (reg[i]) >> 8; - - supply_register (i, swapped); - } -} -#endif -/* Store register REGNO, or all if REGNO == -1. - Return errno value. */ -static void -hms_store_register (regno) - int regno; -{ - if (regno == -1) - { - for (regno = 0; regno < NUM_REGS; regno++) - { - hms_store_register (regno); - } - } - else - { - char *name = get_reg_name (regno); - char buffer[100]; - /* Some regs dont really exist */ - if (!(name[0] == 'p' && name[1] == 'r') - && !(name[0] == 'c' && name[1] == 'y') - && !(name[0] == 't' && name[1] == 'i') - && !(name[0] == 'i' && name[1] == 'n')) - { - sprintf (buffer, "r %s=%x", name, read_register (regno)); - hms_write_cr (buffer); - expect_prompt (); - } - } -} - - -/* Get ready to modify the registers array. On machines which store - individual registers, this doesn't need to do anything. On machines - which store all the registers in one fell swoop, this makes sure - that registers contains all the registers from the program being - debugged. */ - -void -hms_prepare_to_store () -{ - /* Do nothing, since we can store individual regs */ -} - -static CORE_ADDR -translate_addr (addr) - CORE_ADDR addr; -{ - - return (addr); - -} - - -int -hms_xfer_inferior_memory (memaddr, myaddr, len, write, target) - CORE_ADDR memaddr; - char *myaddr; - int len; - int write; - struct target_ops *target; /* ignored */ -{ - - return len; -} - -int -hms_write_inferior_memory (memaddr, myaddr, len) - CORE_ADDR memaddr; - unsigned char *myaddr; - int len; -{ - bfd_vma addr; - int done; - int todo; - char buffer[100]; - done = 0; - hms_write_cr ("."); - expect_prompt (); - while (done < len) - { - char *ptr = buffer; - int thisgo; - int idx; - - thisgo = len - done; - if (thisgo > 20) - thisgo = 20; - - sprintf (ptr, "M.B %4x =", memaddr + done); - ptr += 10; - for (idx = 0; idx < thisgo; idx++) - { - sprintf (ptr, "%2x ", myaddr[idx + done]); - ptr += 3; - } - hms_write_cr (buffer); - expect_prompt (); - done += thisgo; - } -} - -void -hms_files_info () -{ - char *file = "nothing"; - - if (exec_bfd) - file = bfd_get_filename (exec_bfd); - - if (exec_bfd) -#ifdef __GO32__ - printf_filtered ("\tAttached to DOS asynctsr and running program %s\n", file); -#else - printf_filtered ("\tAttached to %s at %d baud and running program %s\n", dev_name, baudrate, file); -#endif - printf_filtered ("\ton an H8/300 processor.\n"); -} - -/* Copy LEN bytes of data from debugger memory at MYADDR - to inferior's memory at MEMADDR. Returns errno value. - * sb/sh instructions don't work on unaligned addresses, when TU=1. - */ - -/* Read LEN bytes from inferior memory at MEMADDR. Put the result - at debugger address MYADDR. Returns errno value. */ -int -hms_read_inferior_memory (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - /* Align to nearest low 16 bits */ - int i; - - CORE_ADDR start = memaddr; - CORE_ADDR end = memaddr + len - 1; - - int ok = 1; - - /* - AAAA: XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX '................' - 012345678901234567890123456789012345678901234567890123456789012345 - 0 1 2 3 4 5 6 - */ - char buffer[66]; - - if (memaddr & 0xf) - abort (); - if (len != 16) - abort (); - - sprintf (buffer, "m %4x %4x", start & 0xffff, end & 0xffff); - - flush (); - hms_write_cr (buffer); - /* drop the echo and newline */ - for (i = 0; i < 13; i++) - readchar (); - - /* Grab the lines as they come out and fill the area */ - /* Skip over cr */ - while (1) - { - int p; - int i; - int addr; - size_t idx; - - char byte[16]; - - buffer[0] = readchar (); - while (buffer[0] == '\r' - || buffer[0] == '\n') - buffer[0] = readchar (); - - if (buffer[0] == 'M') - break; - - for (i = 1; i < 50; i++) - { - buffer[i] = readchar (); - } - /* sometimes we loose characters in the ascii representation of the - data. I don't know where. So just scan for the end of line */ - i = readchar (); - while (i != '\n' && i != '\r') - i = readchar (); - - /* Now parse the line */ - - addr = gethex (4, buffer, &ok); - idx = 6; - for (p = 0; p < 16; p += 2) - { - byte[p] = gethex (2, buffer + idx, &ok); - byte[p + 1] = gethex (2, buffer + idx + 2, &ok); - idx += 5; - } - - for (p = 0; p < 16; p++) - { - if (addr + p >= memaddr && - addr + p < memaddr + len) - { - myaddr[(addr + p) - memaddr] = byte[p]; - - } - - } - } -#ifdef GDB_TARGET_IS_H8500 - expect ("ore>"); -#endif -#ifdef GDB_TARGET_IS_H8300 - expect ("emory>"); -#endif - hms_write_cr ("."); - - expect_prompt (); - return len; -} - - - -#define MAX_BREAKS 16 -static int num_brkpts = 0; -static int -hms_insert_breakpoint (addr, save) - CORE_ADDR addr; - char *save; /* Throw away, let hms save instructions */ -{ - check_open (); - - if (num_brkpts < MAX_BREAKS) - { - char buffer[100]; - - num_brkpts++; - sprintf (buffer, "b %x", addr & 0xffff); - hms_write_cr (buffer); - expect_prompt (); - return (0); - } - else - { - fprintf_filtered (gdb_stderr, - "Too many break points, break point not installed\n"); - return (1); - } - -} -static int -hms_remove_breakpoint (addr, save) - CORE_ADDR addr; - char *save; /* Throw away, let hms save instructions */ -{ - if (num_brkpts > 0) - { - char buffer[100]; - - num_brkpts--; - sprintf (buffer, "b - %x", addr & 0xffff); - hms_write_cr (buffer); - expect_prompt (); - - } - return (0); -} - -/* Clear the hmss notion of what the break points are */ -static int -hms_clear_breakpoints () -{ - - if (is_open) - { - hms_write_cr ("b -"); - expect_prompt (); - } - num_brkpts = 0; -} -static void -hms_mourn () -{ - hms_clear_breakpoints (); - unpush_target (&hms_ops); - generic_mourn_inferior (); -} - -/* Put a command string, in args, out to the hms. The hms is assumed to - be in raw mode, all writing/reading done through desc. - Ouput from the hms is placed on the users terminal until the - prompt from the hms is seen. - FIXME: Can't handle commands that take input. */ - -void -hms_com (args, fromtty) - char *args; - int fromtty; -{ - check_open (); - - if (!args) - return; - - /* Clear all input so only command relative output is displayed */ - - hms_write_cr (args); -/* hms_write ("\030", 1); */ - expect_prompt (); -} - -static void -hms_open (name, from_tty) - char *name; - int from_tty; -{ - unsigned int prl; - char *p; - - if (name == 0) - { - name = ""; - } - if (is_open) - hms_close (0); - dev_name = strdup (name); - - if (!(desc = SERIAL_OPEN (dev_name))) - perror_with_name ((char *) dev_name); - - SERIAL_RAW (desc); - is_open = 1; - push_target (&hms_ops); - dcache_ptr = dcache_init (hms_read_inferior_memory, - hms_write_inferior_memory); - remote_dcache = 1; - /* Hello? Are you there? */ - SERIAL_WRITE (desc, "\r\n", 2); - expect_prompt (); - - /* Clear any break points */ - hms_clear_breakpoints (); - - printf_filtered ("Connected to remote board running HMS monitor.\n"); - add_commands (); -/* hms_drain (); */ -} - -/* Define the target subroutine names */ - -struct target_ops hms_ops; - -static void -init_hms_ops (void) -{ - hms_ops.to_shortname = "hms"; - hms_ops.to_longname = "Remote HMS monitor"; - hms_ops.to_doc = "Use the H8 evaluation board running the HMS monitor connected\n\ -by a serial line."; - hms_ops.to_open = hms_open; - hms_ops.to_close = hms_close; - hms_ops.to_attach = 0; - hms_ops.to_post_attach = NULL; - hms_ops.to_require_attach = NULL; - hms_ops.to_detach = hms_detach; - hms_ops.to_require_detach = NULL; - hms_ops.to_resume = hms_resume; - hms_ops.to_wait = hms_wait; - hms_ops.to_post_wait = NULL; - hms_ops.to_fetch_registers = hms_fetch_register; - hms_ops.to_store_registers = hms_store_register; - hms_ops.to_prepare_to_store = hms_prepare_to_store; - hms_ops.to_xfer_memory = hms_xfer_inferior_memory; - hms_ops.to_files_info = hms_files_info; - hms_ops.to_insert_breakpoint = hms_insert_breakpoint; - hms_ops.to_remove_breakpoint = hms_remove_breakpoint; - hms_ops.to_terminal_init = 0; - hms_ops.to_terminal_inferior = 0; - hms_ops.to_terminal_ours_for_output = 0; - hms_ops.to_terminal_ours = 0; - hms_ops.to_terminal_info = 0; - hms_ops.to_kill = hms_kill; - hms_ops.to_load = generic_load; - hms_ops.to_lookup_symbol = 0; - hms_ops.to_create_inferior = hms_create_inferior; - hms_ops.to_post_startup_inferior = NULL; - hms_ops.to_acknowledge_created_inferior = NULL; - hms_ops.to_clone_and_follow_inferior = NULL; - hms_ops.to_post_follow_inferior_by_clone = NULL; - hms_ops.to_insert_fork_catchpoint = NULL; - hms_ops.to_remove_fork_catchpoint = NULL; - hms_ops.to_insert_vfork_catchpoint = NULL; - hms_ops.to_remove_vfork_catchpoint = NULL; - hms_ops.to_has_forked = NULL; - hms_ops.to_has_vforked = NULL; - hms_ops.to_can_follow_vfork_prior_to_exec = NULL; - hms_ops.to_post_follow_vfork = NULL; - hms_ops.to_insert_exec_catchpoint = NULL; - hms_ops.to_remove_exec_catchpoint = NULL; - hms_ops.to_has_execd = NULL; - hms_ops.to_reported_exec_events_per_exec_call = NULL; - hms_ops.to_has_exited = NULL; - hms_ops.to_mourn_inferior = hms_mourn; - hms_ops.to_can_run = 0; - hms_ops.to_notice_signals = 0; - hms_ops.to_thread_alive = 0; - hms_ops.to_stop = 0; - hms_ops.to_pid_to_exec_file = NULL; - hms_ops.to_core_file_to_sym_file = NULL; - hms_ops.to_stratum = process_stratum; - hms_ops.DONT_USE = 0; - hms_ops.to_has_all_memory = 1; - hms_ops.to_has_memory = 1; - hms_ops.to_has_stack = 1; - hms_ops.to_has_registers = 1; - hms_ops.to_has_execution = 1; - hms_ops.to_sections = 0; - hms_ops.to_sections_end = 0; - hms_ops.to_magic = OPS_MAGIC; -}; - -hms_quiet () /* FIXME - this routine can be removed after Dec '94 */ -{ - quiet = !quiet; - if (quiet) - printf_filtered ("Snoop disabled\n"); - else - printf_filtered ("Snoop enabled\n"); - - printf_filtered ("`snoop' is obsolete, please use `set remotedebug'.\n"); -} - -hms_device (s) - char *s; -{ - if (s) - { - dev_name = get_word (&s); - } -} - -static -hms_speed (s) - char *s; -{ - check_open (); - - if (s) - { - char buffer[100]; - int newrate = atoi (s); - int which = 0; - - if (SERIAL_SETBAUDRATE (desc, newrate)) - error ("Can't use %d baud\n", newrate); - - printf_filtered ("Checking target is in sync\n"); - - printf_filtered ("Sending commands to set target to %d\n", - baudrate); - - sprintf (buffer, "tm %d. N 8 1", baudrate); - hms_write_cr (buffer); - } -} - -/***********************************************************************/ - -static void -hms_drain (args, fromtty) - char *args; - int fromtty; -{ - int c; - while (1) - { - c = SERIAL_READCHAR (desc, 1); - if (c == SERIAL_TIMEOUT) - break; - if (c == SERIAL_ERROR) - break; - if (c > ' ' && c < 127) - printf ("%c", c & 0xff); - else - printf ("<%x>", c & 0xff); - } -} - -static void -add_commands () -{ - - add_com ("hms_drain", class_obscure, hms_drain, - "Drain pending hms text buffers."); -} - -static void -remove_commands () -{ - extern struct cmd_list_element *cmdlist; - delete_cmd ("hms-drain", &cmdlist); -} - - -void -_initialize_remote_hms () -{ - init_hms_ops (); - add_target (&hms_ops); - - add_com ("hms <command>", class_obscure, hms_com, - "Send a command to the HMS monitor."); - - /* FIXME - hms_quiet and `snoop' can be removed after Dec '94 */ - add_com ("snoop", class_obscure, hms_quiet, - "Show what commands are going to the monitor (OBSOLETE - see 'set remotedebug')"); - - add_com ("device", class_obscure, hms_device, - "Set the terminal line for HMS communications"); - - add_com ("speed", class_obscure, hms_speed, - "Set the terminal line speed for HMS communications"); - - dev_name = NULL; -} -#endif |