diff options
Diffstat (limited to 'gdb/remote-d10v.c')
| -rw-r--r-- | gdb/remote-d10v.c | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/gdb/remote-d10v.c b/gdb/remote-d10v.c new file mode 100644 index 0000000..d529b21 --- /dev/null +++ b/gdb/remote-d10v.c @@ -0,0 +1,228 @@ +/* Remote target communications for d10v connected via a serial line. + Copyright 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Free + Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "defs.h" +#include "gdb_string.h" +#include <fcntl.h> +#include "frame.h" +#include "inferior.h" +#include "bfd.h" +#include "symfile.h" +#include "target.h" +#include "wait.h" +/*#include "terminal.h"*/ +#include "gdbcmd.h" +#include "objfiles.h" +#include "gdb-stabs.h" +#include "gdbthread.h" + +#include "dcache.h" + +#ifdef USG +#include <sys/types.h> +#endif + +#include <signal.h> +#include "serial.h" + +/* Prototypes for local functions */ + +static void remote_d10v_open PARAMS ((char *name, int from_tty)); + +/* Define the target subroutine names */ +static struct target_ops remote_d10v_ops; + +/* Open a connection to a remote debugger. + NAME is the filename used for communication. */ + +static void +remote_d10v_open (name, from_tty) + char *name; + int from_tty; +{ + pop_target (); + push_remote_target (name, from_tty); +} + + +/* Translate a GDB virtual ADDR/LEN into a format the remote target + understands. Returns number of bytes that can be transfered + starting at taddr, ZERO if no bytes can be transfered. */ +int +remote_d10v_translate_xfer_address (memaddr, nr_bytes, taddr) + CORE_ADDR memaddr; + int nr_bytes; + CORE_ADDR *taddr; +{ + CORE_ADDR phys; + CORE_ADDR seg; + CORE_ADDR off; + char *from = "unknown"; + char *to = "unknown"; + unsigned short imap0 = read_register (IMAP0_REGNUM); + unsigned short imap1 = read_register (IMAP1_REGNUM); + unsigned short dmap = read_register (DMAP_REGNUM); + + /* GDB interprets addresses as: + + 0x00xxxxxx: Logical data address segment (DMAP translated memory) + 0x01xxxxxx: Logical instruction address segment (IMAP translated memory) + 0x10xxxxxx: Physical data memory segment (On-chip data memory) + 0x11xxxxxx: Physical instruction memory segment (On-chip insn memory) + 0x12xxxxxx: Phisical unified memory segment (Unified memory) + + The remote d10v board interprets addresses as: + + 0x00xxxxxx: Phisical unified memory segment (Unified memory) + 0x01xxxxxx: Physical instruction memory segment (On-chip insn memory) + 0x02xxxxxx: Physical data memory segment (On-chip data memory) + + Translate according to current IMAP/dmap registers */ + + enum { + targ_unified = 0x00000000, + targ_insn = 0x01000000, + targ_data = 0x02000000, + }; + + seg = (memaddr >> 24); + off = (memaddr & 0xffffffL); + + switch (seg) + { + case 0x00: /* in logical data address segment */ + { + from = "logical-data"; + if (off <= 0x7fffL) + { + /* On chip data */ + phys = targ_data + off; + if (off + nr_bytes > 0x7fffL) + /* don't cross VM boundary */ + nr_bytes = 0x7fffL - off + 1; + to = "chip-data"; + } + else if (off <= 0xbfffL) + { + short map = dmap; + if (map & 0x1000) + { + /* Instruction memory */ + phys = targ_insn | ((map & 0xf) << 14) | (off & 0x3fff); + to = "chip-insn"; + } + else + { + /* Unified memory */ + phys = targ_unified | ((map & 0x3ff) << 14) | (off & 0x3fff); + to = "unified"; + } + if (off + nr_bytes > 0xbfffL) + /* don't cross VM boundary */ + nr_bytes = (0xbfffL - off + 1); + } + else + { + /* Logical address out side of data segments, not supported */ + return (0); + } + break; + } + + case 0x01: /* in logical instruction address segment */ + { + short map; + from = "logical-insn"; + if (off <= 0x1ffffL) + { + map = imap0; + } + else if (off <= 0x3ffffL) + { + map = imap1; + } + else + { + /* Logical address outside of IMAP[01] segment, not + supported */ + return (0); + } + if ((off & 0x1ffff) + nr_bytes > 0x1ffffL) + { + /* don't cross VM boundary */ + nr_bytes = 0x1ffffL - (off & 0x1ffffL) + 1; + } + if (map & 0x1000) + /* Instruction memory */ + { + phys = targ_insn | off; + to = "chip-insn"; + } + else + { + phys = ((map & 0x7fL) << 17) + (off & 0x1ffffL); + if (phys > 0xffffffL) + /* Address outside of unified address segment */ + return (0); + phys |= targ_unified; + to = "unified"; + } + break; + } + + case 0x10: /* Physical data memory segment */ + from = "phys-data"; + phys = targ_data | off; + to = "chip-data"; + break; + + case 0x11: /* Physical instruction memory */ + from = "phys-insn"; + phys = targ_insn | off; + to = "chip-insn"; + break; + + case 0x12: /* Physical unified memory */ + from = "phys-unified"; + phys = targ_unified | off; + to = "unified"; + break; + + default: + return (0); + } + + + *taddr = phys; + return nr_bytes; +} + + +void +_initialize_remote_d10v () +{ + remote_d10v_ops.to_shortname = "d10v"; + remote_d10v_ops.to_longname = "Remote d10v serial target in gdb-specific protocol"; + remote_d10v_ops.to_doc = "Use a remote d10v via a serial line, using a gdb-specific protocol.\n\ +Specify the serial device it is connected to (e.g. /dev/ttya)."; + remote_d10v_ops.to_open = remote_d10v_open; + + add_target (&remote_d10v_ops); +} |