diff options
Diffstat (limited to 'gdb/mon960-rom.c')
| -rw-r--r-- | gdb/mon960-rom.c | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/gdb/mon960-rom.c b/gdb/mon960-rom.c new file mode 100644 index 0000000..5a79923 --- /dev/null +++ b/gdb/mon960-rom.c @@ -0,0 +1,270 @@ +/* Remote target glue for the Intel 960 ROM monitor. + Copyright 1995, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + + +#include "defs.h" +#include "gdbcore.h" +#include "target.h" +#include "monitor.h" +#include "serial.h" +#include "srec.h" +#include "xmodem.h" + +#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY) +#define HAVE_SGTTY +#endif + +#ifdef HAVE_SGTTY +#include <sys/ioctl.h> +#endif + +#include <sys/types.h> /* Needed by file.h on Sys V */ +#include <sys/file.h> +#include <signal.h> +#include <sys/stat.h> + +#define USE_GENERIC_LOAD + +int quiet = 0; /* 1 => stifle unnecessary messages */ +serial_t mon960_serial; +char *mon960_ttyname; /* name of tty to talk to mon960 on, or null */ +static struct monitor_ops mon960_cmds; + +#ifdef USE_GENERIC_LOAD +extern void generic_load PARAMS ((char* filename, int from_tty)); +#endif +static void mon960_open PARAMS ((char *args, int from_tty)); + +#ifdef USE_GENERIC_LOAD +static void +mon960_load_gen (filename, from_tty) + char *filename; + int from_tty; +{ + extern int inferior_pid; + generic_load (filename, from_tty); + /* Finally, make the PC point at the start address */ + if (exec_bfd) + write_pc (bfd_get_start_address (exec_bfd)); + + inferior_pid = 0; /* No process now */ +} + +#else +static void +mon960_load (desc, file, hashmark) + serial_t desc; + char *file; + int hashmark; +{ + bfd *abfd; + asection *s; + char *buffer; + int i; + + buffer = alloca (XMODEM_PACKETSIZE); + abfd = bfd_openr (file, 0); + if (!abfd) + { + printf_filtered ("Unable to open file %s\n", file); + return; + } + if (bfd_check_format (abfd, bfd_object) == 0) + { + printf_filtered ("File is not an object file\n"); + return; + } + for (s = abfd->sections; s; s = s->next) + if (s->flags & SEC_LOAD) + { + bfd_size_type section_size; + printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma, + s->vma + s->_raw_size); + gdb_flush (gdb_stdout); + monitor_printf (mon960_cmds.load, s->vma); + if (mon960_cmds.loadresp) + monitor_expect (mon960_cmds.loadresp, NULL, 0); + xmodem_init_xfer (desc); + section_size = bfd_section_size (abfd, s); + for (i = 0; i < section_size; i += XMODEM_DATASIZE) + { + int numbytes; + numbytes = min (XMODEM_DATASIZE, section_size - i); + bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i, + numbytes); + xmodem_send_packet (desc, buffer, numbytes, hashmark); + if (hashmark) + { + putchar_unfiltered ('#'); + gdb_flush (gdb_stdout); + } + } /* Per-packet (or S-record) loop */ + xmodem_finish_xfer (desc); + monitor_expect_prompt (NULL, 0); + putchar_unfiltered ('\n'); + } /* Loadable sections */ + if (hashmark) + putchar_unfiltered ('\n'); +} +#endif + +/* This array of registers need to match the indexes used by GDB. + This exists because the various ROM monitors use different strings + than does GDB, and don't necessarily support all the registers + either. So, typing "info reg sp" becomes a "r30". */ + +/* these correspond to the offsets from tm-* files from config directories */ +/* g0-g14, fp, pfp, sp, rip,r3-15, pc, ac, tc, fp0-3 */ +/* NOTE: "ip" is documented as "ir" in the Mon960 UG. */ +/* NOTE: "ir" can't be accessed... but there's an ip and rip. */ +static char *mon960_regnames[NUM_REGS] = { + /* 0 */ "pfp", "sp", "rip", "r3", "r4", "r5", "r6", "r7", \ + /* 8 */ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",\ + /* 16 */ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + /* 24 */ "g8", "g9", "g10", "g11", "g12", "g13", "g14", "fp", \ + /* 32 */ "pc", "ac", "tc", "ip", "fp0", "fp1", "fp2", "fp3",\ + }; + +/* Define the monitor command strings. Since these are passed directly + through to a printf style function, we may include formatting + strings. We also need a CR or LF on the end. */ + +static struct target_ops mon960_ops; + +/* need to pause the monitor for timing reasons, so slow it down */ +static char *mon960_inits[] = {"\n\r\r\r\r\r\r\r\r\r\r\r\r\r\r\n\r\n\r\n", NULL}; /* Exits sub-command mode & download cmds */ + +static struct monitor_ops mon960_cmds = +{ + MO_CLR_BREAK_USES_ADDR + | MO_NO_ECHO_ON_OPEN + | MO_SEND_BREAK_ON_STOP + | MO_GETMEM_READ_SINGLE, /* flags */ + mon960_inits, /* Init strings */ + "go\n\r", /* continue command */ + "st\n\r", /* single step */ + "\n\r", /* break interrupts the program */ + NULL, /* set a breakpoint */ + /* can't use "br" because only 2 hw bps are supported */ + NULL, /* clear a breakpoint - "de" is for hw bps */ + NULL, /* clear all breakpoints */ + NULL, /* fill (start end val) */ + /* can't use "fi" because it takes words, not bytes */ + { + /* can't use "mb", "md" or "mo" because they require interaction */ + NULL, /* setmem.cmdb (addr, value) */ + "md %x %x\n\r", /* setmem.cmdw (addr, value) */ + NULL, /* setmem.cmdl (addr, value) */ + NULL, /* setmem.cmdll (addr, value) */ + NULL, /* setmem.resp_delim */ + NULL, /* setmem.term */ + NULL, /* setmem.term_cmd */ + }, + { + /* since the parsing of multiple bytes is difficult due to + interspersed addresses, we'll only read 1 value at a time, + even tho these can handle a count */ + "db %x\n\r", /* getmem.cmdb (addr, #bytes) */ + "ds %x\n\r", /* getmem.cmdw (addr, #swords) */ + "di %x\n\r", /* getmem.cmdl (addr, #words) */ + "dd %x\n\r", /* getmem.cmdll (addr, #dwords) */ + " : ", /* getmem.resp_delim */ + NULL, /* getmem.term */ + NULL, /* getmem.term_cmd */ + }, + { + "md %s %x\n\r", /* setreg.cmd (name, value) */ + NULL, /* setreg.resp_delim */ + NULL, /* setreg.term */ + NULL /* setreg.term_cmd */ + }, + { + "di %s\n\r", /* getreg.cmd (name) */ + " : ", /* getreg.resp_delim */ + NULL, /* getreg.term */ + NULL, /* getreg.term_cmd */ + }, + "re\n\r", /* dump_registers */ + "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */ + NULL, /* supply_register */ +#ifdef USE_GENERIC_LOAD + NULL, /* load_routine (defaults to SRECs) */ + NULL, /* download command */ + NULL, /* load response */ +#else + mon960_load, /* load_routine (defaults to SRECs) */ + "do\n\r", /* download command */ + "Downloading\n\r", /* load response */ +#endif + "=>", /* monitor command prompt */ + "\n\r", /* end-of-command delimitor */ + NULL, /* optional command terminator */ + &mon960_ops, /* target operations */ + SERIAL_1_STOPBITS, /* number of stop bits */ + mon960_regnames, /* registers names */ + MONITOR_OPS_MAGIC /* magic */ +}; + +/* invoked from monitor.c - opens the serial port */ +static void +mon960_open (args, from_tty) + char *args; + int from_tty; +{ + char *serial_port_name = args; + if (args) + { + char *cursor = serial_port_name = strsave (args); + + while (*cursor && *cursor != ' ') + cursor++; + + if (*cursor) + *cursor++ = 0; + + while (*cursor == ' ') + cursor++; + + } + monitor_open (serial_port_name, &mon960_cmds, from_tty); +} + + +void +_initialize_mon960 () +{ + init_monitor_ops (&mon960_ops); + + mon960_ops.to_shortname = "mon960"; /* for the target command */ + mon960_ops.to_longname = "Intel 960 rom monitor"; +#ifdef USE_GENERIC_LOAD + mon960_ops.to_load = mon960_load_gen; /* FIXME - should go back and try "do" */ +#endif + /* use SW breaks; target only supports 2 HW breakpoints */ + mon960_ops.to_insert_breakpoint = memory_insert_breakpoint; + mon960_ops.to_remove_breakpoint = memory_remove_breakpoint; + + mon960_ops.to_doc = + "Debug on an Intel 960 eval board running the Mon960 rom monitor.\n" + "Specify the serial device it is connected to (e.g. /dev/ttya)."; + + mon960_ops.to_open = mon960_open; + add_target (&mon960_ops); +} + |