diff options
Diffstat (limited to 'gdb/m88k-tdep.c')
| -rw-r--r-- | gdb/m88k-tdep.c | 1322 |
1 files changed, 661 insertions, 661 deletions
diff --git a/gdb/m88k-tdep.c b/gdb/m88k-tdep.c index 3c96d37..da0b67c 100644 --- a/gdb/m88k-tdep.c +++ b/gdb/m88k-tdep.c @@ -1,661 +1,661 @@ -/* Target-machine dependent code for Motorola 88000 series, for GDB. - - Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, - 2000, 2001, 2002 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -#include "defs.h" -#include "frame.h" -#include "inferior.h" -#include "value.h" -#include "gdbcore.h" -#include "symtab.h" -#include "setjmp.h" -#include "value.h" -#include "regcache.h" - -/* Size of an instruction */ -#define BYTES_PER_88K_INSN 4 - -void frame_find_saved_regs (); - -/* Is this target an m88110? Otherwise assume m88100. This has - relevance for the ways in which we screw with instruction pointers. */ - -int target_is_m88110 = 0; - -void -m88k_target_write_pc (CORE_ADDR pc, ptid_t ptid) -{ - /* According to the MC88100 RISC Microprocessor User's Manual, - section 6.4.3.1.2: - - ... can be made to return to a particular instruction by placing - a valid instruction address in the SNIP and the next sequential - instruction address in the SFIP (with V bits set and E bits - clear). The rte resumes execution at the instruction pointed to - by the SNIP, then the SFIP. - - The E bit is the least significant bit (bit 0). The V (valid) - bit is bit 1. This is why we logical or 2 into the values we are - writing below. It turns out that SXIP plays no role when - returning from an exception so nothing special has to be done - with it. We could even (presumably) give it a totally bogus - value. - - -- Kevin Buettner */ - - write_register_pid (SXIP_REGNUM, pc, ptid); - write_register_pid (SNIP_REGNUM, (pc | 2), ptid); - write_register_pid (SFIP_REGNUM, (pc | 2) + 4, ptid); -} - -/* The type of a register. */ -struct type * -m88k_register_type (int regnum) -{ - if (regnum >= XFP_REGNUM) - return builtin_type_m88110_ext; - else if (regnum == PC_REGNUM || regnum == FP_REGNUM || regnum == SP_REGNUM) - return builtin_type_void_func_ptr; - else - return builtin_type_int32; -} - - -/* The m88k kernel aligns all instructions on 4-byte boundaries. The - kernel also uses the least significant two bits for its own hocus - pocus. When gdb receives an address from the kernel, it needs to - preserve those right-most two bits, but gdb also needs to be careful - to realize that those two bits are not really a part of the address - of an instruction. Shrug. */ - -CORE_ADDR -m88k_addr_bits_remove (CORE_ADDR addr) -{ - return ((addr) & ~3); -} - - -/* Given a GDB frame, determine the address of the calling function's frame. - This will be used to create a new GDB frame struct, and then - INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. - - For us, the frame address is its stack pointer value, so we look up - the function prologue to determine the caller's sp value, and return it. */ - -CORE_ADDR -frame_chain (struct frame_info *thisframe) -{ - - frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0); - /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not - the ADDRESS, of SP_REGNUM. It also depends on the cache of - frame_find_saved_regs results. */ - if (thisframe->fsr->regs[SP_REGNUM]) - return thisframe->fsr->regs[SP_REGNUM]; - else - return thisframe->frame; /* Leaf fn -- next frame up has same SP. */ -} - -int -frameless_function_invocation (struct frame_info *frame) -{ - - frame_find_saved_regs (frame, (struct frame_saved_regs *) 0); - /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not - the ADDRESS, of SP_REGNUM. It also depends on the cache of - frame_find_saved_regs results. */ - if (frame->fsr->regs[SP_REGNUM]) - return 0; /* Frameful -- return addr saved somewhere */ - else - return 1; /* Frameless -- no saved return address */ -} - -void -init_extra_frame_info (int fromleaf, struct frame_info *frame) -{ - frame->fsr = 0; /* Not yet allocated */ - frame->args_pointer = 0; /* Unknown */ - frame->locals_pointer = 0; /* Unknown */ -} - -/* Examine an m88k function prologue, recording the addresses at which - registers are saved explicitly by the prologue code, and returning - the address of the first instruction after the prologue (but not - after the instruction at address LIMIT, as explained below). - - LIMIT places an upper bound on addresses of the instructions to be - examined. If the prologue code scan reaches LIMIT, the scan is - aborted and LIMIT is returned. This is used, when examining the - prologue for the current frame, to keep examine_prologue () from - claiming that a given register has been saved when in fact the - instruction that saves it has not yet been executed. LIMIT is used - at other times to stop the scan when we hit code after the true - function prologue (e.g. for the first source line) which might - otherwise be mistaken for function prologue. - - The format of the function prologue matched by this routine is - derived from examination of the source to gcc 1.95, particularly - the routine output_prologue () in config/out-m88k.c. - - subu r31,r31,n # stack pointer update - - (st rn,r31,offset)? # save incoming regs - (st.d rn,r31,offset)? - - (addu r30,r31,n)? # frame pointer update - - (pic sequence)? # PIC code prologue - - (or rn,rm,0)? # Move parameters to other regs - */ - -/* Macros for extracting fields from instructions. */ - -#define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos)) -#define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width)) -#define SUBU_OFFSET(x) ((unsigned)(x & 0xFFFF)) -#define ST_OFFSET(x) ((unsigned)((x) & 0xFFFF)) -#define ST_SRC(x) EXTRACT_FIELD ((x), 21, 5) -#define ADDU_OFFSET(x) ((unsigned)(x & 0xFFFF)) - -/* - * prologue_insn_tbl is a table of instructions which may comprise a - * function prologue. Associated with each table entry (corresponding - * to a single instruction or group of instructions), is an action. - * This action is used by examine_prologue (below) to determine - * the state of certain machine registers and where the stack frame lives. - */ - -enum prologue_insn_action -{ - PIA_SKIP, /* don't care what the instruction does */ - PIA_NOTE_ST, /* note register stored and where */ - PIA_NOTE_STD, /* note pair of registers stored and where */ - PIA_NOTE_SP_ADJUSTMENT, /* note stack pointer adjustment */ - PIA_NOTE_FP_ASSIGNMENT, /* note frame pointer assignment */ - PIA_NOTE_PROLOGUE_END, /* no more prologue */ -}; - -struct prologue_insns - { - unsigned long insn; - unsigned long mask; - enum prologue_insn_action action; - }; - -struct prologue_insns prologue_insn_tbl[] = -{ - /* Various register move instructions */ - {0x58000000, 0xf800ffff, PIA_SKIP}, /* or/or.u with immed of 0 */ - {0xf4005800, 0xfc1fffe0, PIA_SKIP}, /* or rd, r0, rs */ - {0xf4005800, 0xfc00ffff, PIA_SKIP}, /* or rd, rs, r0 */ - - /* Stack pointer setup: "subu sp, sp, n" where n is a multiple of 8 */ - {0x67ff0000, 0xffff0007, PIA_NOTE_SP_ADJUSTMENT}, - - /* Frame pointer assignment: "addu r30, r31, n" */ - {0x63df0000, 0xffff0000, PIA_NOTE_FP_ASSIGNMENT}, - - /* Store to stack instructions; either "st rx, sp, n" or "st.d rx, sp, n" */ - {0x241f0000, 0xfc1f0000, PIA_NOTE_ST}, /* st rx, sp, n */ - {0x201f0000, 0xfc1f0000, PIA_NOTE_STD}, /* st.d rs, sp, n */ - - /* Instructions needed for setting up r25 for pic code. */ - {0x5f200000, 0xffff0000, PIA_SKIP}, /* or.u r25, r0, offset_high */ - {0xcc000002, 0xffffffff, PIA_SKIP}, /* bsr.n Lab */ - {0x5b390000, 0xffff0000, PIA_SKIP}, /* or r25, r25, offset_low */ - {0xf7396001, 0xffffffff, PIA_SKIP}, /* Lab: addu r25, r25, r1 */ - - /* Various branch or jump instructions which have a delay slot -- these - do not form part of the prologue, but the instruction in the delay - slot might be a store instruction which should be noted. */ - {0xc4000000, 0xe4000000, PIA_NOTE_PROLOGUE_END}, - /* br.n, bsr.n, bb0.n, or bb1.n */ - {0xec000000, 0xfc000000, PIA_NOTE_PROLOGUE_END}, /* bcnd.n */ - {0xf400c400, 0xfffff7e0, PIA_NOTE_PROLOGUE_END} /* jmp.n or jsr.n */ - -}; - - -/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or - is not the address of a valid instruction, the address of the next - instruction beyond ADDR otherwise. *PWORD1 receives the first word - of the instruction. */ - -#define NEXT_PROLOGUE_INSN(addr, lim, pword1) \ - (((addr) < (lim)) ? next_insn (addr, pword1) : 0) - -/* Read the m88k instruction at 'memaddr' and return the address of - the next instruction after that, or 0 if 'memaddr' is not the - address of a valid instruction. The instruction - is stored at 'pword1'. */ - -CORE_ADDR -next_insn (CORE_ADDR memaddr, unsigned long *pword1) -{ - *pword1 = read_memory_integer (memaddr, BYTES_PER_88K_INSN); - return memaddr + BYTES_PER_88K_INSN; -} - -/* Read a register from frames called by us (or from the hardware regs). */ - -static int -read_next_frame_reg (struct frame_info *frame, int regno) -{ - for (; frame; frame = frame->next) - { - if (regno == SP_REGNUM) - return FRAME_FP (frame); - else if (frame->fsr->regs[regno]) - return read_memory_integer (frame->fsr->regs[regno], 4); - } - return read_register (regno); -} - -/* Examine the prologue of a function. `ip' points to the first instruction. - `limit' is the limit of the prologue (e.g. the addr of the first - linenumber, or perhaps the program counter if we're stepping through). - `frame_sp' is the stack pointer value in use in this frame. - `fsr' is a pointer to a frame_saved_regs structure into which we put - info about the registers saved by this frame. - `fi' is a struct frame_info pointer; we fill in various fields in it - to reflect the offsets of the arg pointer and the locals pointer. */ - -static CORE_ADDR -examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit, - CORE_ADDR frame_sp, struct frame_saved_regs *fsr, - struct frame_info *fi) -{ - register CORE_ADDR next_ip; - register int src; - unsigned long insn; - int size, offset; - char must_adjust[32]; /* If set, must adjust offsets in fsr */ - int sp_offset = -1; /* -1 means not set (valid must be mult of 8) */ - int fp_offset = -1; /* -1 means not set */ - CORE_ADDR frame_fp; - CORE_ADDR prologue_end = 0; - - memset (must_adjust, '\0', sizeof (must_adjust)); - next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); - - while (next_ip) - { - struct prologue_insns *pip; - - for (pip = prologue_insn_tbl; (insn & pip->mask) != pip->insn;) - if (++pip >= prologue_insn_tbl + sizeof prologue_insn_tbl) - goto end_of_prologue_found; /* not a prologue insn */ - - switch (pip->action) - { - case PIA_NOTE_ST: - case PIA_NOTE_STD: - if (sp_offset != -1) - { - src = ST_SRC (insn); - offset = ST_OFFSET (insn); - must_adjust[src] = 1; - fsr->regs[src++] = offset; /* Will be adjusted later */ - if (pip->action == PIA_NOTE_STD && src < 32) - { - offset += 4; - must_adjust[src] = 1; - fsr->regs[src++] = offset; - } - } - else - goto end_of_prologue_found; - break; - case PIA_NOTE_SP_ADJUSTMENT: - if (sp_offset == -1) - sp_offset = -SUBU_OFFSET (insn); - else - goto end_of_prologue_found; - break; - case PIA_NOTE_FP_ASSIGNMENT: - if (fp_offset == -1) - fp_offset = ADDU_OFFSET (insn); - else - goto end_of_prologue_found; - break; - case PIA_NOTE_PROLOGUE_END: - if (!prologue_end) - prologue_end = ip; - break; - case PIA_SKIP: - default: - /* Do nothing */ - break; - } - - ip = next_ip; - next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); - } - -end_of_prologue_found: - - if (prologue_end) - ip = prologue_end; - - /* We're done with the prologue. If we don't care about the stack - frame itself, just return. (Note that fsr->regs has been trashed, - but the one caller who calls with fi==0 passes a dummy there.) */ - - if (fi == 0) - return ip; - - /* - OK, now we have: - - sp_offset original (before any alloca calls) displacement of SP - (will be negative). - - fp_offset displacement from original SP to the FP for this frame - or -1. - - fsr->regs[0..31] displacement from original SP to the stack - location where reg[0..31] is stored. - - must_adjust[0..31] set if corresponding offset was set. - - If alloca has been called between the function prologue and the current - IP, then the current SP (frame_sp) will not be the original SP as set by - the function prologue. If the current SP is not the original SP, then the - compiler will have allocated an FP for this frame, fp_offset will be set, - and we can use it to calculate the original SP. - - Then, we figure out where the arguments and locals are, and relocate the - offsets in fsr->regs to absolute addresses. */ - - if (fp_offset != -1) - { - /* We have a frame pointer, so get it, and base our calc's on it. */ - frame_fp = (CORE_ADDR) read_next_frame_reg (fi->next, ACTUAL_FP_REGNUM); - frame_sp = frame_fp - fp_offset; - } - else - { - /* We have no frame pointer, therefore frame_sp is still the same value - as set by prologue. But where is the frame itself? */ - if (must_adjust[SRP_REGNUM]) - { - /* Function header saved SRP (r1), the return address. Frame starts - 4 bytes down from where it was saved. */ - frame_fp = frame_sp + fsr->regs[SRP_REGNUM] - 4; - fi->locals_pointer = frame_fp; - } - else - { - /* Function header didn't save SRP (r1), so we are in a leaf fn or - are otherwise confused. */ - frame_fp = -1; - } - } - - /* The locals are relative to the FP (whether it exists as an allocated - register, or just as an assumed offset from the SP) */ - fi->locals_pointer = frame_fp; - - /* The arguments are just above the SP as it was before we adjusted it - on entry. */ - fi->args_pointer = frame_sp - sp_offset; - - /* Now that we know the SP value used by the prologue, we know where - it saved all the registers. */ - for (src = 0; src < 32; src++) - if (must_adjust[src]) - fsr->regs[src] += frame_sp; - - /* The saved value of the SP is always known. */ - /* (we hope...) */ - if (fsr->regs[SP_REGNUM] != 0 - && fsr->regs[SP_REGNUM] != frame_sp - sp_offset) - fprintf_unfiltered (gdb_stderr, "Bad saved SP value %lx != %lx, offset %x!\n", - fsr->regs[SP_REGNUM], - frame_sp - sp_offset, sp_offset); - - fsr->regs[SP_REGNUM] = frame_sp - sp_offset; - - return (ip); -} - -/* Given an ip value corresponding to the start of a function, - return the ip of the first instruction after the function - prologue. */ - -CORE_ADDR -m88k_skip_prologue (CORE_ADDR ip) -{ - struct frame_saved_regs saved_regs_dummy; - struct symtab_and_line sal; - CORE_ADDR limit; - - sal = find_pc_line (ip, 0); - limit = (sal.end) ? sal.end : 0xffffffff; - - return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy, - (struct frame_info *) 0)); -} - -/* Put here the code to store, into a struct frame_saved_regs, - the addresses of the saved registers of frame described by FRAME_INFO. - This includes special registers such as pc and fp saved in special - ways in the stack frame. sp is even more special: - the address we return for it IS the sp for the next frame. - - We cache the result of doing this in the frame_obstack, since it is - fairly expensive. */ - -void -frame_find_saved_regs (struct frame_info *fi, struct frame_saved_regs *fsr) -{ - register struct frame_saved_regs *cache_fsr; - CORE_ADDR ip; - struct symtab_and_line sal; - CORE_ADDR limit; - - if (!fi->fsr) - { - cache_fsr = (struct frame_saved_regs *) - frame_obstack_alloc (sizeof (struct frame_saved_regs)); - memset (cache_fsr, '\0', sizeof (struct frame_saved_regs)); - fi->fsr = cache_fsr; - - /* Find the start and end of the function prologue. If the PC - is in the function prologue, we only consider the part that - has executed already. In the case where the PC is not in - the function prologue, we set limit to two instructions beyond - where the prologue ends in case if any of the prologue instructions - were moved into a delay slot of a branch instruction. */ - - ip = get_pc_function_start (fi->pc); - sal = find_pc_line (ip, 0); - limit = (sal.end && sal.end < fi->pc) ? sal.end + 2 * BYTES_PER_88K_INSN - : fi->pc; - - /* This will fill in fields in *fi as well as in cache_fsr. */ -#ifdef SIGTRAMP_FRAME_FIXUP - if (fi->signal_handler_caller) - SIGTRAMP_FRAME_FIXUP (fi->frame); -#endif - examine_prologue (ip, limit, fi->frame, cache_fsr, fi); -#ifdef SIGTRAMP_SP_FIXUP - if (fi->signal_handler_caller && fi->fsr->regs[SP_REGNUM]) - SIGTRAMP_SP_FIXUP (fi->fsr->regs[SP_REGNUM]); -#endif - } - - if (fsr) - *fsr = *fi->fsr; -} - -/* Return the address of the locals block for the frame - described by FI. Returns 0 if the address is unknown. - NOTE! Frame locals are referred to by negative offsets from the - argument pointer, so this is the same as frame_args_address(). */ - -CORE_ADDR -frame_locals_address (struct frame_info *fi) -{ - struct frame_saved_regs fsr; - - if (fi->args_pointer) /* Cached value is likely there. */ - return fi->args_pointer; - - /* Nope, generate it. */ - - get_frame_saved_regs (fi, &fsr); - - return fi->args_pointer; -} - -/* Return the address of the argument block for the frame - described by FI. Returns 0 if the address is unknown. */ - -CORE_ADDR -frame_args_address (struct frame_info *fi) -{ - struct frame_saved_regs fsr; - - if (fi->args_pointer) /* Cached value is likely there. */ - return fi->args_pointer; - - /* Nope, generate it. */ - - get_frame_saved_regs (fi, &fsr); - - return fi->args_pointer; -} - -/* Return the saved PC from this frame. - - If the frame has a memory copy of SRP_REGNUM, use that. If not, - just use the register SRP_REGNUM itself. */ - -CORE_ADDR -frame_saved_pc (struct frame_info *frame) -{ - return read_next_frame_reg (frame, SRP_REGNUM); -} - - -#define DUMMY_FRAME_SIZE 192 - -static void -write_word (CORE_ADDR sp, ULONGEST word) -{ - register int len = REGISTER_SIZE; - char buffer[MAX_REGISTER_RAW_SIZE]; - - store_unsigned_integer (buffer, len, word); - write_memory (sp, buffer, len); -} - -void -m88k_push_dummy_frame (void) -{ - register CORE_ADDR sp = read_register (SP_REGNUM); - register int rn; - int offset; - - sp -= DUMMY_FRAME_SIZE; /* allocate a bunch of space */ - - for (rn = 0, offset = 0; rn <= SP_REGNUM; rn++, offset += 4) - write_word (sp + offset, read_register (rn)); - - write_word (sp + offset, read_register (SXIP_REGNUM)); - offset += 4; - - write_word (sp + offset, read_register (SNIP_REGNUM)); - offset += 4; - - write_word (sp + offset, read_register (SFIP_REGNUM)); - offset += 4; - - write_word (sp + offset, read_register (PSR_REGNUM)); - offset += 4; - - write_word (sp + offset, read_register (FPSR_REGNUM)); - offset += 4; - - write_word (sp + offset, read_register (FPCR_REGNUM)); - offset += 4; - - write_register (SP_REGNUM, sp); - write_register (ACTUAL_FP_REGNUM, sp); -} - -void -pop_frame (void) -{ - register struct frame_info *frame = get_current_frame (); - register int regnum; - struct frame_saved_regs fsr; - - get_frame_saved_regs (frame, &fsr); - - if (PC_IN_CALL_DUMMY (read_pc (), read_register (SP_REGNUM), frame->frame)) - { - /* FIXME: I think get_frame_saved_regs should be handling this so - that we can deal with the saved registers properly (e.g. frame - 1 is a call dummy, the user types "frame 2" and then "print $ps"). */ - register CORE_ADDR sp = read_register (ACTUAL_FP_REGNUM); - int offset; - - for (regnum = 0, offset = 0; regnum <= SP_REGNUM; regnum++, offset += 4) - (void) write_register (regnum, read_memory_integer (sp + offset, 4)); - - write_register (SXIP_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - write_register (SNIP_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - write_register (SFIP_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - write_register (PSR_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - write_register (FPSR_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - write_register (FPCR_REGNUM, read_memory_integer (sp + offset, 4)); - offset += 4; - - } - else - { - for (regnum = FP_REGNUM; regnum > 0; regnum--) - if (fsr.regs[regnum]) - write_register (regnum, - read_memory_integer (fsr.regs[regnum], 4)); - write_pc (frame_saved_pc (frame)); - } - reinit_frame_cache (); -} - -void -_initialize_m88k_tdep (void) -{ - tm_print_insn = print_insn_m88k; -} +// OBSOLETE /* Target-machine dependent code for Motorola 88000 series, for GDB. +// OBSOLETE +// OBSOLETE Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, +// OBSOLETE 2000, 2001, 2002 Free Software Foundation, Inc. +// OBSOLETE +// OBSOLETE This file is part of GDB. +// OBSOLETE +// OBSOLETE This program is free software; you can redistribute it and/or modify +// OBSOLETE it under the terms of the GNU General Public License as published by +// OBSOLETE the Free Software Foundation; either version 2 of the License, or +// OBSOLETE (at your option) any later version. +// OBSOLETE +// OBSOLETE This program is distributed in the hope that it will be useful, +// OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of +// OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// OBSOLETE GNU General Public License for more details. +// OBSOLETE +// OBSOLETE You should have received a copy of the GNU General Public License +// OBSOLETE along with this program; if not, write to the Free Software +// OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, +// OBSOLETE Boston, MA 02111-1307, USA. */ +// OBSOLETE +// OBSOLETE #include "defs.h" +// OBSOLETE #include "frame.h" +// OBSOLETE #include "inferior.h" +// OBSOLETE #include "value.h" +// OBSOLETE #include "gdbcore.h" +// OBSOLETE #include "symtab.h" +// OBSOLETE #include "setjmp.h" +// OBSOLETE #include "value.h" +// OBSOLETE #include "regcache.h" +// OBSOLETE +// OBSOLETE /* Size of an instruction */ +// OBSOLETE #define BYTES_PER_88K_INSN 4 +// OBSOLETE +// OBSOLETE void frame_find_saved_regs (); +// OBSOLETE +// OBSOLETE /* Is this target an m88110? Otherwise assume m88100. This has +// OBSOLETE relevance for the ways in which we screw with instruction pointers. */ +// OBSOLETE +// OBSOLETE int target_is_m88110 = 0; +// OBSOLETE +// OBSOLETE void +// OBSOLETE m88k_target_write_pc (CORE_ADDR pc, ptid_t ptid) +// OBSOLETE { +// OBSOLETE /* According to the MC88100 RISC Microprocessor User's Manual, +// OBSOLETE section 6.4.3.1.2: +// OBSOLETE +// OBSOLETE ... can be made to return to a particular instruction by placing +// OBSOLETE a valid instruction address in the SNIP and the next sequential +// OBSOLETE instruction address in the SFIP (with V bits set and E bits +// OBSOLETE clear). The rte resumes execution at the instruction pointed to +// OBSOLETE by the SNIP, then the SFIP. +// OBSOLETE +// OBSOLETE The E bit is the least significant bit (bit 0). The V (valid) +// OBSOLETE bit is bit 1. This is why we logical or 2 into the values we are +// OBSOLETE writing below. It turns out that SXIP plays no role when +// OBSOLETE returning from an exception so nothing special has to be done +// OBSOLETE with it. We could even (presumably) give it a totally bogus +// OBSOLETE value. +// OBSOLETE +// OBSOLETE -- Kevin Buettner */ +// OBSOLETE +// OBSOLETE write_register_pid (SXIP_REGNUM, pc, ptid); +// OBSOLETE write_register_pid (SNIP_REGNUM, (pc | 2), ptid); +// OBSOLETE write_register_pid (SFIP_REGNUM, (pc | 2) + 4, ptid); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* The type of a register. */ +// OBSOLETE struct type * +// OBSOLETE m88k_register_type (int regnum) +// OBSOLETE { +// OBSOLETE if (regnum >= XFP_REGNUM) +// OBSOLETE return builtin_type_m88110_ext; +// OBSOLETE else if (regnum == PC_REGNUM || regnum == FP_REGNUM || regnum == SP_REGNUM) +// OBSOLETE return builtin_type_void_func_ptr; +// OBSOLETE else +// OBSOLETE return builtin_type_int32; +// OBSOLETE } +// OBSOLETE +// OBSOLETE +// OBSOLETE /* The m88k kernel aligns all instructions on 4-byte boundaries. The +// OBSOLETE kernel also uses the least significant two bits for its own hocus +// OBSOLETE pocus. When gdb receives an address from the kernel, it needs to +// OBSOLETE preserve those right-most two bits, but gdb also needs to be careful +// OBSOLETE to realize that those two bits are not really a part of the address +// OBSOLETE of an instruction. Shrug. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE m88k_addr_bits_remove (CORE_ADDR addr) +// OBSOLETE { +// OBSOLETE return ((addr) & ~3); +// OBSOLETE } +// OBSOLETE +// OBSOLETE +// OBSOLETE /* Given a GDB frame, determine the address of the calling function's frame. +// OBSOLETE This will be used to create a new GDB frame struct, and then +// OBSOLETE INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. +// OBSOLETE +// OBSOLETE For us, the frame address is its stack pointer value, so we look up +// OBSOLETE the function prologue to determine the caller's sp value, and return it. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE frame_chain (struct frame_info *thisframe) +// OBSOLETE { +// OBSOLETE +// OBSOLETE frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0); +// OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not +// OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of +// OBSOLETE frame_find_saved_regs results. */ +// OBSOLETE if (thisframe->fsr->regs[SP_REGNUM]) +// OBSOLETE return thisframe->fsr->regs[SP_REGNUM]; +// OBSOLETE else +// OBSOLETE return thisframe->frame; /* Leaf fn -- next frame up has same SP. */ +// OBSOLETE } +// OBSOLETE +// OBSOLETE int +// OBSOLETE frameless_function_invocation (struct frame_info *frame) +// OBSOLETE { +// OBSOLETE +// OBSOLETE frame_find_saved_regs (frame, (struct frame_saved_regs *) 0); +// OBSOLETE /* NOTE: this depends on frame_find_saved_regs returning the VALUE, not +// OBSOLETE the ADDRESS, of SP_REGNUM. It also depends on the cache of +// OBSOLETE frame_find_saved_regs results. */ +// OBSOLETE if (frame->fsr->regs[SP_REGNUM]) +// OBSOLETE return 0; /* Frameful -- return addr saved somewhere */ +// OBSOLETE else +// OBSOLETE return 1; /* Frameless -- no saved return address */ +// OBSOLETE } +// OBSOLETE +// OBSOLETE void +// OBSOLETE init_extra_frame_info (int fromleaf, struct frame_info *frame) +// OBSOLETE { +// OBSOLETE frame->fsr = 0; /* Not yet allocated */ +// OBSOLETE frame->args_pointer = 0; /* Unknown */ +// OBSOLETE frame->locals_pointer = 0; /* Unknown */ +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Examine an m88k function prologue, recording the addresses at which +// OBSOLETE registers are saved explicitly by the prologue code, and returning +// OBSOLETE the address of the first instruction after the prologue (but not +// OBSOLETE after the instruction at address LIMIT, as explained below). +// OBSOLETE +// OBSOLETE LIMIT places an upper bound on addresses of the instructions to be +// OBSOLETE examined. If the prologue code scan reaches LIMIT, the scan is +// OBSOLETE aborted and LIMIT is returned. This is used, when examining the +// OBSOLETE prologue for the current frame, to keep examine_prologue () from +// OBSOLETE claiming that a given register has been saved when in fact the +// OBSOLETE instruction that saves it has not yet been executed. LIMIT is used +// OBSOLETE at other times to stop the scan when we hit code after the true +// OBSOLETE function prologue (e.g. for the first source line) which might +// OBSOLETE otherwise be mistaken for function prologue. +// OBSOLETE +// OBSOLETE The format of the function prologue matched by this routine is +// OBSOLETE derived from examination of the source to gcc 1.95, particularly +// OBSOLETE the routine output_prologue () in config/out-m88k.c. +// OBSOLETE +// OBSOLETE subu r31,r31,n # stack pointer update +// OBSOLETE +// OBSOLETE (st rn,r31,offset)? # save incoming regs +// OBSOLETE (st.d rn,r31,offset)? +// OBSOLETE +// OBSOLETE (addu r30,r31,n)? # frame pointer update +// OBSOLETE +// OBSOLETE (pic sequence)? # PIC code prologue +// OBSOLETE +// OBSOLETE (or rn,rm,0)? # Move parameters to other regs +// OBSOLETE */ +// OBSOLETE +// OBSOLETE /* Macros for extracting fields from instructions. */ +// OBSOLETE +// OBSOLETE #define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos)) +// OBSOLETE #define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width)) +// OBSOLETE #define SUBU_OFFSET(x) ((unsigned)(x & 0xFFFF)) +// OBSOLETE #define ST_OFFSET(x) ((unsigned)((x) & 0xFFFF)) +// OBSOLETE #define ST_SRC(x) EXTRACT_FIELD ((x), 21, 5) +// OBSOLETE #define ADDU_OFFSET(x) ((unsigned)(x & 0xFFFF)) +// OBSOLETE +// OBSOLETE /* +// OBSOLETE * prologue_insn_tbl is a table of instructions which may comprise a +// OBSOLETE * function prologue. Associated with each table entry (corresponding +// OBSOLETE * to a single instruction or group of instructions), is an action. +// OBSOLETE * This action is used by examine_prologue (below) to determine +// OBSOLETE * the state of certain machine registers and where the stack frame lives. +// OBSOLETE */ +// OBSOLETE +// OBSOLETE enum prologue_insn_action +// OBSOLETE { +// OBSOLETE PIA_SKIP, /* don't care what the instruction does */ +// OBSOLETE PIA_NOTE_ST, /* note register stored and where */ +// OBSOLETE PIA_NOTE_STD, /* note pair of registers stored and where */ +// OBSOLETE PIA_NOTE_SP_ADJUSTMENT, /* note stack pointer adjustment */ +// OBSOLETE PIA_NOTE_FP_ASSIGNMENT, /* note frame pointer assignment */ +// OBSOLETE PIA_NOTE_PROLOGUE_END, /* no more prologue */ +// OBSOLETE }; +// OBSOLETE +// OBSOLETE struct prologue_insns +// OBSOLETE { +// OBSOLETE unsigned long insn; +// OBSOLETE unsigned long mask; +// OBSOLETE enum prologue_insn_action action; +// OBSOLETE }; +// OBSOLETE +// OBSOLETE struct prologue_insns prologue_insn_tbl[] = +// OBSOLETE { +// OBSOLETE /* Various register move instructions */ +// OBSOLETE {0x58000000, 0xf800ffff, PIA_SKIP}, /* or/or.u with immed of 0 */ +// OBSOLETE {0xf4005800, 0xfc1fffe0, PIA_SKIP}, /* or rd, r0, rs */ +// OBSOLETE {0xf4005800, 0xfc00ffff, PIA_SKIP}, /* or rd, rs, r0 */ +// OBSOLETE +// OBSOLETE /* Stack pointer setup: "subu sp, sp, n" where n is a multiple of 8 */ +// OBSOLETE {0x67ff0000, 0xffff0007, PIA_NOTE_SP_ADJUSTMENT}, +// OBSOLETE +// OBSOLETE /* Frame pointer assignment: "addu r30, r31, n" */ +// OBSOLETE {0x63df0000, 0xffff0000, PIA_NOTE_FP_ASSIGNMENT}, +// OBSOLETE +// OBSOLETE /* Store to stack instructions; either "st rx, sp, n" or "st.d rx, sp, n" */ +// OBSOLETE {0x241f0000, 0xfc1f0000, PIA_NOTE_ST}, /* st rx, sp, n */ +// OBSOLETE {0x201f0000, 0xfc1f0000, PIA_NOTE_STD}, /* st.d rs, sp, n */ +// OBSOLETE +// OBSOLETE /* Instructions needed for setting up r25 for pic code. */ +// OBSOLETE {0x5f200000, 0xffff0000, PIA_SKIP}, /* or.u r25, r0, offset_high */ +// OBSOLETE {0xcc000002, 0xffffffff, PIA_SKIP}, /* bsr.n Lab */ +// OBSOLETE {0x5b390000, 0xffff0000, PIA_SKIP}, /* or r25, r25, offset_low */ +// OBSOLETE {0xf7396001, 0xffffffff, PIA_SKIP}, /* Lab: addu r25, r25, r1 */ +// OBSOLETE +// OBSOLETE /* Various branch or jump instructions which have a delay slot -- these +// OBSOLETE do not form part of the prologue, but the instruction in the delay +// OBSOLETE slot might be a store instruction which should be noted. */ +// OBSOLETE {0xc4000000, 0xe4000000, PIA_NOTE_PROLOGUE_END}, +// OBSOLETE /* br.n, bsr.n, bb0.n, or bb1.n */ +// OBSOLETE {0xec000000, 0xfc000000, PIA_NOTE_PROLOGUE_END}, /* bcnd.n */ +// OBSOLETE {0xf400c400, 0xfffff7e0, PIA_NOTE_PROLOGUE_END} /* jmp.n or jsr.n */ +// OBSOLETE +// OBSOLETE }; +// OBSOLETE +// OBSOLETE +// OBSOLETE /* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or +// OBSOLETE is not the address of a valid instruction, the address of the next +// OBSOLETE instruction beyond ADDR otherwise. *PWORD1 receives the first word +// OBSOLETE of the instruction. */ +// OBSOLETE +// OBSOLETE #define NEXT_PROLOGUE_INSN(addr, lim, pword1) \ +// OBSOLETE (((addr) < (lim)) ? next_insn (addr, pword1) : 0) +// OBSOLETE +// OBSOLETE /* Read the m88k instruction at 'memaddr' and return the address of +// OBSOLETE the next instruction after that, or 0 if 'memaddr' is not the +// OBSOLETE address of a valid instruction. The instruction +// OBSOLETE is stored at 'pword1'. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE next_insn (CORE_ADDR memaddr, unsigned long *pword1) +// OBSOLETE { +// OBSOLETE *pword1 = read_memory_integer (memaddr, BYTES_PER_88K_INSN); +// OBSOLETE return memaddr + BYTES_PER_88K_INSN; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Read a register from frames called by us (or from the hardware regs). */ +// OBSOLETE +// OBSOLETE static int +// OBSOLETE read_next_frame_reg (struct frame_info *frame, int regno) +// OBSOLETE { +// OBSOLETE for (; frame; frame = frame->next) +// OBSOLETE { +// OBSOLETE if (regno == SP_REGNUM) +// OBSOLETE return FRAME_FP (frame); +// OBSOLETE else if (frame->fsr->regs[regno]) +// OBSOLETE return read_memory_integer (frame->fsr->regs[regno], 4); +// OBSOLETE } +// OBSOLETE return read_register (regno); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Examine the prologue of a function. `ip' points to the first instruction. +// OBSOLETE `limit' is the limit of the prologue (e.g. the addr of the first +// OBSOLETE linenumber, or perhaps the program counter if we're stepping through). +// OBSOLETE `frame_sp' is the stack pointer value in use in this frame. +// OBSOLETE `fsr' is a pointer to a frame_saved_regs structure into which we put +// OBSOLETE info about the registers saved by this frame. +// OBSOLETE `fi' is a struct frame_info pointer; we fill in various fields in it +// OBSOLETE to reflect the offsets of the arg pointer and the locals pointer. */ +// OBSOLETE +// OBSOLETE static CORE_ADDR +// OBSOLETE examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit, +// OBSOLETE CORE_ADDR frame_sp, struct frame_saved_regs *fsr, +// OBSOLETE struct frame_info *fi) +// OBSOLETE { +// OBSOLETE register CORE_ADDR next_ip; +// OBSOLETE register int src; +// OBSOLETE unsigned long insn; +// OBSOLETE int size, offset; +// OBSOLETE char must_adjust[32]; /* If set, must adjust offsets in fsr */ +// OBSOLETE int sp_offset = -1; /* -1 means not set (valid must be mult of 8) */ +// OBSOLETE int fp_offset = -1; /* -1 means not set */ +// OBSOLETE CORE_ADDR frame_fp; +// OBSOLETE CORE_ADDR prologue_end = 0; +// OBSOLETE +// OBSOLETE memset (must_adjust, '\0', sizeof (must_adjust)); +// OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); +// OBSOLETE +// OBSOLETE while (next_ip) +// OBSOLETE { +// OBSOLETE struct prologue_insns *pip; +// OBSOLETE +// OBSOLETE for (pip = prologue_insn_tbl; (insn & pip->mask) != pip->insn;) +// OBSOLETE if (++pip >= prologue_insn_tbl + sizeof prologue_insn_tbl) +// OBSOLETE goto end_of_prologue_found; /* not a prologue insn */ +// OBSOLETE +// OBSOLETE switch (pip->action) +// OBSOLETE { +// OBSOLETE case PIA_NOTE_ST: +// OBSOLETE case PIA_NOTE_STD: +// OBSOLETE if (sp_offset != -1) +// OBSOLETE { +// OBSOLETE src = ST_SRC (insn); +// OBSOLETE offset = ST_OFFSET (insn); +// OBSOLETE must_adjust[src] = 1; +// OBSOLETE fsr->regs[src++] = offset; /* Will be adjusted later */ +// OBSOLETE if (pip->action == PIA_NOTE_STD && src < 32) +// OBSOLETE { +// OBSOLETE offset += 4; +// OBSOLETE must_adjust[src] = 1; +// OBSOLETE fsr->regs[src++] = offset; +// OBSOLETE } +// OBSOLETE } +// OBSOLETE else +// OBSOLETE goto end_of_prologue_found; +// OBSOLETE break; +// OBSOLETE case PIA_NOTE_SP_ADJUSTMENT: +// OBSOLETE if (sp_offset == -1) +// OBSOLETE sp_offset = -SUBU_OFFSET (insn); +// OBSOLETE else +// OBSOLETE goto end_of_prologue_found; +// OBSOLETE break; +// OBSOLETE case PIA_NOTE_FP_ASSIGNMENT: +// OBSOLETE if (fp_offset == -1) +// OBSOLETE fp_offset = ADDU_OFFSET (insn); +// OBSOLETE else +// OBSOLETE goto end_of_prologue_found; +// OBSOLETE break; +// OBSOLETE case PIA_NOTE_PROLOGUE_END: +// OBSOLETE if (!prologue_end) +// OBSOLETE prologue_end = ip; +// OBSOLETE break; +// OBSOLETE case PIA_SKIP: +// OBSOLETE default: +// OBSOLETE /* Do nothing */ +// OBSOLETE break; +// OBSOLETE } +// OBSOLETE +// OBSOLETE ip = next_ip; +// OBSOLETE next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn); +// OBSOLETE } +// OBSOLETE +// OBSOLETE end_of_prologue_found: +// OBSOLETE +// OBSOLETE if (prologue_end) +// OBSOLETE ip = prologue_end; +// OBSOLETE +// OBSOLETE /* We're done with the prologue. If we don't care about the stack +// OBSOLETE frame itself, just return. (Note that fsr->regs has been trashed, +// OBSOLETE but the one caller who calls with fi==0 passes a dummy there.) */ +// OBSOLETE +// OBSOLETE if (fi == 0) +// OBSOLETE return ip; +// OBSOLETE +// OBSOLETE /* +// OBSOLETE OK, now we have: +// OBSOLETE +// OBSOLETE sp_offset original (before any alloca calls) displacement of SP +// OBSOLETE (will be negative). +// OBSOLETE +// OBSOLETE fp_offset displacement from original SP to the FP for this frame +// OBSOLETE or -1. +// OBSOLETE +// OBSOLETE fsr->regs[0..31] displacement from original SP to the stack +// OBSOLETE location where reg[0..31] is stored. +// OBSOLETE +// OBSOLETE must_adjust[0..31] set if corresponding offset was set. +// OBSOLETE +// OBSOLETE If alloca has been called between the function prologue and the current +// OBSOLETE IP, then the current SP (frame_sp) will not be the original SP as set by +// OBSOLETE the function prologue. If the current SP is not the original SP, then the +// OBSOLETE compiler will have allocated an FP for this frame, fp_offset will be set, +// OBSOLETE and we can use it to calculate the original SP. +// OBSOLETE +// OBSOLETE Then, we figure out where the arguments and locals are, and relocate the +// OBSOLETE offsets in fsr->regs to absolute addresses. */ +// OBSOLETE +// OBSOLETE if (fp_offset != -1) +// OBSOLETE { +// OBSOLETE /* We have a frame pointer, so get it, and base our calc's on it. */ +// OBSOLETE frame_fp = (CORE_ADDR) read_next_frame_reg (fi->next, ACTUAL_FP_REGNUM); +// OBSOLETE frame_sp = frame_fp - fp_offset; +// OBSOLETE } +// OBSOLETE else +// OBSOLETE { +// OBSOLETE /* We have no frame pointer, therefore frame_sp is still the same value +// OBSOLETE as set by prologue. But where is the frame itself? */ +// OBSOLETE if (must_adjust[SRP_REGNUM]) +// OBSOLETE { +// OBSOLETE /* Function header saved SRP (r1), the return address. Frame starts +// OBSOLETE 4 bytes down from where it was saved. */ +// OBSOLETE frame_fp = frame_sp + fsr->regs[SRP_REGNUM] - 4; +// OBSOLETE fi->locals_pointer = frame_fp; +// OBSOLETE } +// OBSOLETE else +// OBSOLETE { +// OBSOLETE /* Function header didn't save SRP (r1), so we are in a leaf fn or +// OBSOLETE are otherwise confused. */ +// OBSOLETE frame_fp = -1; +// OBSOLETE } +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* The locals are relative to the FP (whether it exists as an allocated +// OBSOLETE register, or just as an assumed offset from the SP) */ +// OBSOLETE fi->locals_pointer = frame_fp; +// OBSOLETE +// OBSOLETE /* The arguments are just above the SP as it was before we adjusted it +// OBSOLETE on entry. */ +// OBSOLETE fi->args_pointer = frame_sp - sp_offset; +// OBSOLETE +// OBSOLETE /* Now that we know the SP value used by the prologue, we know where +// OBSOLETE it saved all the registers. */ +// OBSOLETE for (src = 0; src < 32; src++) +// OBSOLETE if (must_adjust[src]) +// OBSOLETE fsr->regs[src] += frame_sp; +// OBSOLETE +// OBSOLETE /* The saved value of the SP is always known. */ +// OBSOLETE /* (we hope...) */ +// OBSOLETE if (fsr->regs[SP_REGNUM] != 0 +// OBSOLETE && fsr->regs[SP_REGNUM] != frame_sp - sp_offset) +// OBSOLETE fprintf_unfiltered (gdb_stderr, "Bad saved SP value %lx != %lx, offset %x!\n", +// OBSOLETE fsr->regs[SP_REGNUM], +// OBSOLETE frame_sp - sp_offset, sp_offset); +// OBSOLETE +// OBSOLETE fsr->regs[SP_REGNUM] = frame_sp - sp_offset; +// OBSOLETE +// OBSOLETE return (ip); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Given an ip value corresponding to the start of a function, +// OBSOLETE return the ip of the first instruction after the function +// OBSOLETE prologue. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE m88k_skip_prologue (CORE_ADDR ip) +// OBSOLETE { +// OBSOLETE struct frame_saved_regs saved_regs_dummy; +// OBSOLETE struct symtab_and_line sal; +// OBSOLETE CORE_ADDR limit; +// OBSOLETE +// OBSOLETE sal = find_pc_line (ip, 0); +// OBSOLETE limit = (sal.end) ? sal.end : 0xffffffff; +// OBSOLETE +// OBSOLETE return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy, +// OBSOLETE (struct frame_info *) 0)); +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, +// OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO. +// OBSOLETE This includes special registers such as pc and fp saved in special +// OBSOLETE ways in the stack frame. sp is even more special: +// OBSOLETE the address we return for it IS the sp for the next frame. +// OBSOLETE +// OBSOLETE We cache the result of doing this in the frame_obstack, since it is +// OBSOLETE fairly expensive. */ +// OBSOLETE +// OBSOLETE void +// OBSOLETE frame_find_saved_regs (struct frame_info *fi, struct frame_saved_regs *fsr) +// OBSOLETE { +// OBSOLETE register struct frame_saved_regs *cache_fsr; +// OBSOLETE CORE_ADDR ip; +// OBSOLETE struct symtab_and_line sal; +// OBSOLETE CORE_ADDR limit; +// OBSOLETE +// OBSOLETE if (!fi->fsr) +// OBSOLETE { +// OBSOLETE cache_fsr = (struct frame_saved_regs *) +// OBSOLETE frame_obstack_alloc (sizeof (struct frame_saved_regs)); +// OBSOLETE memset (cache_fsr, '\0', sizeof (struct frame_saved_regs)); +// OBSOLETE fi->fsr = cache_fsr; +// OBSOLETE +// OBSOLETE /* Find the start and end of the function prologue. If the PC +// OBSOLETE is in the function prologue, we only consider the part that +// OBSOLETE has executed already. In the case where the PC is not in +// OBSOLETE the function prologue, we set limit to two instructions beyond +// OBSOLETE where the prologue ends in case if any of the prologue instructions +// OBSOLETE were moved into a delay slot of a branch instruction. */ +// OBSOLETE +// OBSOLETE ip = get_pc_function_start (fi->pc); +// OBSOLETE sal = find_pc_line (ip, 0); +// OBSOLETE limit = (sal.end && sal.end < fi->pc) ? sal.end + 2 * BYTES_PER_88K_INSN +// OBSOLETE : fi->pc; +// OBSOLETE +// OBSOLETE /* This will fill in fields in *fi as well as in cache_fsr. */ +// OBSOLETE #ifdef SIGTRAMP_FRAME_FIXUP +// OBSOLETE if (fi->signal_handler_caller) +// OBSOLETE SIGTRAMP_FRAME_FIXUP (fi->frame); +// OBSOLETE #endif +// OBSOLETE examine_prologue (ip, limit, fi->frame, cache_fsr, fi); +// OBSOLETE #ifdef SIGTRAMP_SP_FIXUP +// OBSOLETE if (fi->signal_handler_caller && fi->fsr->regs[SP_REGNUM]) +// OBSOLETE SIGTRAMP_SP_FIXUP (fi->fsr->regs[SP_REGNUM]); +// OBSOLETE #endif +// OBSOLETE } +// OBSOLETE +// OBSOLETE if (fsr) +// OBSOLETE *fsr = *fi->fsr; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Return the address of the locals block for the frame +// OBSOLETE described by FI. Returns 0 if the address is unknown. +// OBSOLETE NOTE! Frame locals are referred to by negative offsets from the +// OBSOLETE argument pointer, so this is the same as frame_args_address(). */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE frame_locals_address (struct frame_info *fi) +// OBSOLETE { +// OBSOLETE struct frame_saved_regs fsr; +// OBSOLETE +// OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */ +// OBSOLETE return fi->args_pointer; +// OBSOLETE +// OBSOLETE /* Nope, generate it. */ +// OBSOLETE +// OBSOLETE get_frame_saved_regs (fi, &fsr); +// OBSOLETE +// OBSOLETE return fi->args_pointer; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Return the address of the argument block for the frame +// OBSOLETE described by FI. Returns 0 if the address is unknown. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE frame_args_address (struct frame_info *fi) +// OBSOLETE { +// OBSOLETE struct frame_saved_regs fsr; +// OBSOLETE +// OBSOLETE if (fi->args_pointer) /* Cached value is likely there. */ +// OBSOLETE return fi->args_pointer; +// OBSOLETE +// OBSOLETE /* Nope, generate it. */ +// OBSOLETE +// OBSOLETE get_frame_saved_regs (fi, &fsr); +// OBSOLETE +// OBSOLETE return fi->args_pointer; +// OBSOLETE } +// OBSOLETE +// OBSOLETE /* Return the saved PC from this frame. +// OBSOLETE +// OBSOLETE If the frame has a memory copy of SRP_REGNUM, use that. If not, +// OBSOLETE just use the register SRP_REGNUM itself. */ +// OBSOLETE +// OBSOLETE CORE_ADDR +// OBSOLETE frame_saved_pc (struct frame_info *frame) +// OBSOLETE { +// OBSOLETE return read_next_frame_reg (frame, SRP_REGNUM); +// OBSOLETE } +// OBSOLETE +// OBSOLETE +// OBSOLETE #define DUMMY_FRAME_SIZE 192 +// OBSOLETE +// OBSOLETE static void +// OBSOLETE write_word (CORE_ADDR sp, ULONGEST word) +// OBSOLETE { +// OBSOLETE register int len = REGISTER_SIZE; +// OBSOLETE char buffer[MAX_REGISTER_RAW_SIZE]; +// OBSOLETE +// OBSOLETE store_unsigned_integer (buffer, len, word); +// OBSOLETE write_memory (sp, buffer, len); +// OBSOLETE } +// OBSOLETE +// OBSOLETE void +// OBSOLETE m88k_push_dummy_frame (void) +// OBSOLETE { +// OBSOLETE register CORE_ADDR sp = read_register (SP_REGNUM); +// OBSOLETE register int rn; +// OBSOLETE int offset; +// OBSOLETE +// OBSOLETE sp -= DUMMY_FRAME_SIZE; /* allocate a bunch of space */ +// OBSOLETE +// OBSOLETE for (rn = 0, offset = 0; rn <= SP_REGNUM; rn++, offset += 4) +// OBSOLETE write_word (sp + offset, read_register (rn)); +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (SXIP_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (SNIP_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (SFIP_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (PSR_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (FPSR_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_word (sp + offset, read_register (FPCR_REGNUM)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (SP_REGNUM, sp); +// OBSOLETE write_register (ACTUAL_FP_REGNUM, sp); +// OBSOLETE } +// OBSOLETE +// OBSOLETE void +// OBSOLETE pop_frame (void) +// OBSOLETE { +// OBSOLETE register struct frame_info *frame = get_current_frame (); +// OBSOLETE register int regnum; +// OBSOLETE struct frame_saved_regs fsr; +// OBSOLETE +// OBSOLETE get_frame_saved_regs (frame, &fsr); +// OBSOLETE +// OBSOLETE if (PC_IN_CALL_DUMMY (read_pc (), read_register (SP_REGNUM), frame->frame)) +// OBSOLETE { +// OBSOLETE /* FIXME: I think get_frame_saved_regs should be handling this so +// OBSOLETE that we can deal with the saved registers properly (e.g. frame +// OBSOLETE 1 is a call dummy, the user types "frame 2" and then "print $ps"). */ +// OBSOLETE register CORE_ADDR sp = read_register (ACTUAL_FP_REGNUM); +// OBSOLETE int offset; +// OBSOLETE +// OBSOLETE for (regnum = 0, offset = 0; regnum <= SP_REGNUM; regnum++, offset += 4) +// OBSOLETE (void) write_register (regnum, read_memory_integer (sp + offset, 4)); +// OBSOLETE +// OBSOLETE write_register (SXIP_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (SNIP_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (SFIP_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (PSR_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (FPSR_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE write_register (FPCR_REGNUM, read_memory_integer (sp + offset, 4)); +// OBSOLETE offset += 4; +// OBSOLETE +// OBSOLETE } +// OBSOLETE else +// OBSOLETE { +// OBSOLETE for (regnum = FP_REGNUM; regnum > 0; regnum--) +// OBSOLETE if (fsr.regs[regnum]) +// OBSOLETE write_register (regnum, +// OBSOLETE read_memory_integer (fsr.regs[regnum], 4)); +// OBSOLETE write_pc (frame_saved_pc (frame)); +// OBSOLETE } +// OBSOLETE reinit_frame_cache (); +// OBSOLETE } +// OBSOLETE +// OBSOLETE void +// OBSOLETE _initialize_m88k_tdep (void) +// OBSOLETE { +// OBSOLETE tm_print_insn = print_insn_m88k; +// OBSOLETE } |