diff options
Diffstat (limited to 'gdb/m-sun2.h')
| -rw-r--r-- | gdb/m-sun2.h | 462 |
1 files changed, 0 insertions, 462 deletions
diff --git a/gdb/m-sun2.h b/gdb/m-sun2.h deleted file mode 100644 index 97b1839..0000000 --- a/gdb/m-sun2.h +++ /dev/null @@ -1,462 +0,0 @@ -/* Parameters for execution on a Sun, for GDB, the GNU debugger. - Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. - -This file is part of GDB. - -GDB is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GDB is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GDB; see the file COPYING. If not, write to -the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#ifndef sun2 -#define sun2 -#endif - -/* Define the bit, byte, and word ordering of the machine. */ -#define BITS_BIG_ENDIAN -#define BYTES_BIG_ENDIAN -#define WORDS_BIG_ENDIAN - -/* Define this if the C compiler puts an underscore at the front - of external names before giving them to the linker. */ - -#define NAMES_HAVE_UNDERSCORE - -/* Debugger information will be in DBX format. */ - -#define READ_DBX_FORMAT - -/* Offset from address of function to start of its code. - Zero on most machines. */ - -#define FUNCTION_START_OFFSET 0 - -/* Advance PC across any function entry prologue instructions - to reach some "real" code. */ - -#define SKIP_PROLOGUE(pc) \ -{ register int op = read_memory_integer (pc, 2); \ - if (op == 0047126) \ - pc += 4; /* Skip link #word */ \ - else if (op == 0044016) \ - pc += 6; /* Skip link #long */ \ -} - -/* Immediately after a function call, return the saved pc. - Can't go through the frames for this because on some machines - the new frame is not set up until the new function executes - some instructions. */ - -#define SAVED_PC_AFTER_CALL(frame) \ -read_memory_integer (read_register (SP_REGNUM), 4) - -/* This is the amount to subtract from u.u_ar0 - to get the offset in the core file of the register values. */ - -#define KERNEL_U_ADDR 0x2800 - -/* Address of end of stack space. */ - -#define STACK_END_ADDR 0x1000000 - -/* Stack grows downward. */ - -#define INNER_THAN < - -/* Sequence of bytes for breakpoint instruction. */ - -#define BREAKPOINT {0x4e, 0x4f} - -/* Amount PC must be decremented by after a breakpoint. - This is often the number of bytes in BREAKPOINT - but not always. */ - -#define DECR_PC_AFTER_BREAK 2 - -/* Nonzero if instruction at PC is a return instruction. */ - -#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 2) == 0x4e75) - -/* Return 1 if P points to an invalid floating point value. */ - -#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */ - -/* Largest integer type */ -#define LONGEST long - -/* Name of the builtin type for the LONGEST type above. */ -#define BUILTIN_TYPE_LONGEST builtin_type_long - -/* Say how long registers are. */ - -#define REGISTER_TYPE long - -/* Number of machine registers */ - -#define NUM_REGS 18 - -/* Number that are really general registers */ - -#define NUM_GENERAL_REGS 16 - -/* Initializer for an array of names of registers. - There should be NUM_REGS strings in this initializer. */ - -#define REGISTER_NAMES {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", "ps", "pc"} - -/* Register numbers of various important registers. - Note that some of these values are "real" register numbers, - and correspond to the general registers of the machine, - and some are "phony" register numbers which are too large - to be actual register numbers as far as the user is concerned - but do serve to get the desired values when passed to read_register. */ - -#define FP_REGNUM 14 /* Contains address of executing stack frame */ -#define SP_REGNUM 15 /* Contains address of top of stack */ -#define PS_REGNUM 16 /* Contains processor status */ -#define PC_REGNUM 17 /* Contains program counter */ - -/* Total amount of space needed to store our copies of the machine's - register state, the array `registers'. */ -#define REGISTER_BYTES (16*4+8) - -/* Index within `registers' of the first byte of the space for - register N. */ - -#define REGISTER_BYTE(N) ((N) * 4) - -/* Number of bytes of storage in the actual machine representation - for register N. On the 68000, all regs are 4 bytes. */ - -#define REGISTER_RAW_SIZE(N) 4 - -/* Number of bytes of storage in the program's representation - for register N. On the 68000, all regs are 4 bytes. */ - -#define REGISTER_VIRTUAL_SIZE(N) 4 - -/* Largest value REGISTER_RAW_SIZE can have. */ - -#define MAX_REGISTER_RAW_SIZE 4 - -/* Largest value REGISTER_VIRTUAL_SIZE can have. */ - -#define MAX_REGISTER_VIRTUAL_SIZE 4 - -/* Nonzero if register N requires conversion - from raw format to virtual format. */ - -#define REGISTER_CONVERTIBLE(N) 0 - -/* Convert data from raw format for register REGNUM - to virtual format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) bcopy ((FROM), (TO), 4); - -/* Convert data from virtual format for register REGNUM - to raw format for register REGNUM. */ - -#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) bcopy ((FROM), (TO), 4); - -/* Return the GDB type object for the "standard" data type - of data in register N. */ - -#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int - -/* Store the address of the place in which to copy the structure the - subroutine will return. This is called from call_function. */ - -#define STORE_STRUCT_RETURN(ADDR, SP) \ - { write_register (9, (ADDR)); } - -/* Extract from an array REGBUF containing the (raw) register state - a function return value of type TYPE, and copy that, in virtual format, - into VALBUF. */ - -#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ - bcopy (REGBUF, VALBUF, TYPE_LENGTH (TYPE)) - -/* Write into appropriate registers a function return value - of type TYPE, given in virtual format. */ - -#define STORE_RETURN_VALUE(TYPE,VALBUF) \ - write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) - -/* Extract from an array REGBUF containing the (raw) register state - the address in which a function should return its structure value, - as a CORE_ADDR (or an expression that can be used as one). */ - -#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) - -/* Enable use of alternate code to read and write registers. */ - -#define NEW_SUN_PTRACE - -/* Enable use of alternate code for Sun's format of core dump file. */ - -#define NEW_SUN_CORE - -/* Do implement the attach and detach commands. */ - -#define ATTACH_DETACH - -/* This is a piece of magic that is given a register number REGNO - and as BLOCKEND the address in the system of the end of the user structure - and stores in ADDR the address in the kernel or core dump - of that register. */ - -#define REGISTER_U_ADDR(addr, blockend, regno) \ -{ addr = blockend + regno * 4; } - -/* Describe the pointer in each stack frame to the previous stack frame - (its caller). */ - -/* FRAME_CHAIN takes a frame's nominal address - and produces the frame's chain-pointer. - - FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address - and produces the nominal address of the caller frame. - - However, if FRAME_CHAIN_VALID returns zero, - it means the given frame is the outermost one and has no caller. - In that case, FRAME_CHAIN_COMBINE is not used. */ - -/* In the case of the Sun, the frame's nominal address - is the address of a 4-byte word containing the calling frame's address. */ - -#define FRAME_CHAIN(thisframe) \ - (outside_startup_file ((thisframe)->pc) ? \ - read_memory_integer ((thisframe)->frame, 4) :\ - 0) - -#define FRAME_CHAIN_VALID(chain, thisframe) \ - (chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe)))) - -#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) - -/* Define other aspects of the stack frame. */ - -/* A macro that tells us whether the function invocation represented - by FI does not have a frame on the stack associated with it. If it - does not, FRAMELESS is set to 1, else 0. */ -#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ - FRAMELESS_LOOK_FOR_PROLOGUE(FI, FRAMELESS) - -#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) - -#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) - -#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) - -/* Set VAL to the number of args passed to frame described by FI. - Can set VAL to -1, meaning no way to tell. */ - -/* We can't tell how many args there are - now that the C compiler delays popping them. */ -#define FRAME_NUM_ARGS(val,fi) (val = -1) - -#if 0 -#define FRAME_NUM_ARGS(val, fi) \ -{ register CORE_ADDR pc = FRAME_SAVED_PC (fi); \ - register int insn = 0177777 & read_memory_integer (pc, 2); \ - val = 0; \ - if (insn == 0047757 || insn == 0157374) /* lea W(sp),sp or addaw #W,sp */ \ - val = read_memory_integer (pc + 2, 2); \ - else if ((insn & 0170777) == 0050217 /* addql #N, sp */ \ - || (insn & 0170777) == 0050117) /* addqw */ \ - { val = (insn >> 9) & 7; if (val == 0) val = 8; } \ - else if (insn == 0157774) /* addal #WW, sp */ \ - val = read_memory_integer (pc + 2, 4); \ - val >>= 2; } -#endif - -/* Return number of bytes at start of arglist that are not really args. */ - -#define FRAME_ARGS_SKIP 8 - -/* Put here the code to store, into a struct frame_saved_regs, - the addresses of the saved registers of frame described by FRAME_INFO. - This includes special registers such as pc and fp saved in special - ways in the stack frame. sp is even more special: - the address we return for it IS the sp for the next frame. */ - -#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ -{ register int regnum; \ - register int regmask; \ - register CORE_ADDR next_addr; \ - register CORE_ADDR pc; \ - bzero (&frame_saved_regs, sizeof frame_saved_regs); \ - if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 4 \ - && (frame_info)->pc <= (frame_info)->frame) \ - { next_addr = (frame_info)->frame; \ - pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4; }\ - else \ - { pc = get_pc_function_start ((frame_info)->pc); \ - /* Verify we have a link a6 instruction next; \ - if not we lose. If we win, find the address above the saved \ - regs using the amount of storage from the link instruction. */\ - if (044016 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \ - else if (047126 == read_memory_integer (pc, 2)) \ - next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \ - else goto lose; \ - /* If have an addal #-n, sp next, adjust next_addr. */ \ - if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \ - next_addr += read_memory_integer (pc += 2, 4), pc += 4; \ - } \ - /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \ - regmask = read_memory_integer (pc + 2, 2); \ - if (0044327 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 0, the first written */ \ - for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \ - else if (0044347 == read_memory_integer (pc, 2)) \ - { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \ - for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \ - if (regmask & 1) \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - else if (0x2f00 == 0xfff0 & read_memory_integer (pc, 2)) \ - { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \ - (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ - /* clrw -(sp); movw ccr,-(sp) may follow. */ \ - if (0x426742e7 == read_memory_integer (pc, 4)) \ - (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \ - lose: ; \ - (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \ - (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ - (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \ -} - -/* Things needed for making the inferior call functions. */ - -/* Push an empty stack frame, to record the current PC, etc. */ - -#define PUSH_DUMMY_FRAME \ -{ register CORE_ADDR sp = read_register (SP_REGNUM);\ - register int regnum; \ - sp = push_word (sp, read_register (PC_REGNUM)); \ - sp = push_word (sp, read_register (FP_REGNUM)); \ - write_register (FP_REGNUM, sp); \ - for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \ - sp = push_word (sp, read_register (regnum)); \ - sp = push_word (sp, read_register (PS_REGNUM)); \ - write_register (SP_REGNUM, sp); } - -/* Discard from the stack the innermost frame, restoring all registers. */ - -#define POP_FRAME \ -{ register FRAME frame = get_current_frame (); \ - register CORE_ADDR fp; \ - register int regnum; \ - struct frame_saved_regs fsr; \ - struct frame_info *fi; \ - fi = get_frame_info (frame); \ - fp = fi->frame; \ - get_frame_saved_regs (fi, &fsr); \ - for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \ - if (fsr.regs[regnum]) \ - write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \ - if (fsr.regs[PS_REGNUM]) \ - write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4)); \ - write_register (FP_REGNUM, read_memory_integer (fp, 4)); \ - write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \ - write_register (SP_REGNUM, fp + 8); \ - flush_cached_frames (); \ - set_current_frame ( create_new_frame (read_register (FP_REGNUM),\ - read_pc ())); } - -/* This sequence of words is the instructions - moveml 0xfffc,-(sp) - clrw -(sp) - movew ccr,-(sp) - /..* The arguments are pushed at this point by GDB; - no code is needed in the dummy for this. - The CALL_DUMMY_START_OFFSET gives the position of - the following jsr instruction. *../ - jsr @#32323232 - addl #69696969,sp - bpt - nop -Note this is 24 bytes. -We actually start executing at the jsr, since the pushing of the -registers is done by PUSH_DUMMY_FRAME. If this were real code, -the arguments for the function called by the jsr would be pushed -between the moveml and the jsr, and we could allow it to execute through. -But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is done, -and we cannot allow the moveml to push the registers again lest they be -taken for the arguments. */ - -#define CALL_DUMMY {0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, 0x4e4f4e71} - -#define CALL_DUMMY_LENGTH 24 - -#define CALL_DUMMY_START_OFFSET 8 - -/* Insert the specified number of args and function address - into a call sequence of the above form stored at DUMMYNAME. */ - -#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, type) \ -{ *(int *)((char *) dummyname + 16) = nargs * 4; \ - *(int *)((char *) dummyname + 10) = fun; } - -/* Interface definitions for kernel debugger KDB. */ - -/* Map machine fault codes into signal numbers. - First subtract 0, divide by 4, then index in a table. - Faults for which the entry in this table is 0 - are not handled by KDB; the program's own trap handler - gets to handle then. */ - -#define FAULT_CODE_ORIGIN 0 -#define FAULT_CODE_UNITS 4 -#define FAULT_TABLE \ -{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ - 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ - 0, 0, 0, 0, 0, 0, 0, 0, \ - SIGILL } - -/* Start running with a stack stretching from BEG to END. - BEG and END should be symbols meaningful to the assembler. - This is used only for kdb. */ - -#define INIT_STACK(beg, end) \ -{ asm (".globl end"); \ - asm ("movel $ end, sp"); \ - asm ("clrl fp"); } - -/* Push the frame pointer register on the stack. */ -#define PUSH_FRAME_PTR \ - asm ("movel fp, -(sp)"); - -/* Copy the top-of-stack to the frame pointer register. */ -#define POP_FRAME_PTR \ - asm ("movl (sp), fp"); - -/* After KDB is entered by a fault, push all registers - that GDB thinks about (all NUM_REGS of them), - so that they appear in order of ascending GDB register number. - The fault code will be on the stack beyond the last register. */ - -#define PUSH_REGISTERS \ -{ asm ("clrw -(sp)"); \ - asm ("pea 10(sp)"); \ - asm ("movem $ 0xfffe,-(sp)"); } - -/* Assuming the registers (including processor status) have been - pushed on the stack in order of ascending GDB register number, - restore them and return to the address in the saved PC register. */ - -#define POP_REGISTERS \ -{ asm ("subil $8,28(sp)"); \ - asm ("movem (sp),$ 0xffff"); \ - asm ("rte"); } |