diff options
Diffstat (limited to 'gdb/linux-tdep.c')
| -rw-r--r-- | gdb/linux-tdep.c | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/gdb/linux-tdep.c b/gdb/linux-tdep.c index bfb6404..fbdca46 100644 --- a/gdb/linux-tdep.c +++ b/gdb/linux-tdep.c @@ -36,6 +36,71 @@ #include <ctype.h> +/* This enum represents the signals' numbers on a generic architecture + running the Linux kernel. The definition of "generic" comes from + the file <include/uapi/asm-generic/signal.h>, from the Linux kernel + tree, which is the "de facto" implementation of signal numbers to + be used by new architecture ports. + + For those architectures which have differences between the generic + standard (e.g., Alpha), we define the different signals (and *only* + those) in the specific target-dependent file (e.g., + alpha-linux-tdep.c, for Alpha). Please refer to the architecture's + tdep file for more information. + + ARM deserves a special mention here. On the file + <arch/arm/include/uapi/asm/signal.h>, it defines only one different + (and ARM-only) signal, which is SIGSWI, with the same number as + SIGRTMIN. This signal is used only for a very specific target, + called ArthurOS (from RISCOS). Therefore, we do not handle it on + the ARM-tdep file, and we can safely use the generic signal handler + here for ARM targets. + + As stated above, this enum is derived from + <include/uapi/asm-generic/signal.h>, from the Linux kernel + tree. */ + +enum + { + LINUX_SIGHUP = 1, + LINUX_SIGINT = 2, + LINUX_SIGQUIT = 3, + LINUX_SIGILL = 4, + LINUX_SIGTRAP = 5, + LINUX_SIGABRT = 6, + LINUX_SIGIOT = 6, + LINUX_SIGBUS = 7, + LINUX_SIGFPE = 8, + LINUX_SIGKILL = 9, + LINUX_SIGUSR1 = 10, + LINUX_SIGSEGV = 11, + LINUX_SIGUSR2 = 12, + LINUX_SIGPIPE = 13, + LINUX_SIGALRM = 14, + LINUX_SIGTERM = 15, + LINUX_SIGSTKFLT = 16, + LINUX_SIGCHLD = 17, + LINUX_SIGCONT = 18, + LINUX_SIGSTOP = 19, + LINUX_SIGTSTP = 20, + LINUX_SIGTTIN = 21, + LINUX_SIGTTOU = 22, + LINUX_SIGURG = 23, + LINUX_SIGXCPU = 24, + LINUX_SIGXFSZ = 25, + LINUX_SIGVTALRM = 26, + LINUX_SIGPROF = 27, + LINUX_SIGWINCH = 28, + LINUX_SIGIO = 29, + LINUX_SIGPOLL = LINUX_SIGIO, + LINUX_SIGPWR = 30, + LINUX_SIGSYS = 31, + LINUX_SIGUNUSED = 31, + + LINUX_SIGRTMIN = 32, + LINUX_SIGRTMAX = 64, + }; + static struct gdbarch_data *linux_gdbarch_data_handle; struct linux_gdbarch_data @@ -1447,6 +1512,257 @@ linux_make_corefile_notes_1 (struct gdbarch *gdbarch, bfd *obfd, int *note_size) linux_collect_thread_registers); } +/* Implementation of `gdbarch_gdb_signal_from_target', as defined in + gdbarch.h. This function is not static because it is exported to + other -tdep files. */ + +enum gdb_signal +linux_gdb_signal_from_target (struct gdbarch *gdbarch, int signal) +{ + switch (signal) + { + case 0: + return GDB_SIGNAL_0; + + case LINUX_SIGHUP: + return GDB_SIGNAL_HUP; + + case LINUX_SIGINT: + return GDB_SIGNAL_INT; + + case LINUX_SIGQUIT: + return GDB_SIGNAL_QUIT; + + case LINUX_SIGILL: + return GDB_SIGNAL_ILL; + + case LINUX_SIGTRAP: + return GDB_SIGNAL_TRAP; + + case LINUX_SIGABRT: + return GDB_SIGNAL_ABRT; + + case LINUX_SIGBUS: + return GDB_SIGNAL_BUS; + + case LINUX_SIGFPE: + return GDB_SIGNAL_FPE; + + case LINUX_SIGKILL: + return GDB_SIGNAL_KILL; + + case LINUX_SIGUSR1: + return GDB_SIGNAL_USR1; + + case LINUX_SIGSEGV: + return GDB_SIGNAL_SEGV; + + case LINUX_SIGUSR2: + return GDB_SIGNAL_USR2; + + case LINUX_SIGPIPE: + return GDB_SIGNAL_PIPE; + + case LINUX_SIGALRM: + return GDB_SIGNAL_ALRM; + + case LINUX_SIGTERM: + return GDB_SIGNAL_TERM; + + case LINUX_SIGCHLD: + return GDB_SIGNAL_CHLD; + + case LINUX_SIGCONT: + return GDB_SIGNAL_CONT; + + case LINUX_SIGSTOP: + return GDB_SIGNAL_STOP; + + case LINUX_SIGTSTP: + return GDB_SIGNAL_TSTP; + + case LINUX_SIGTTIN: + return GDB_SIGNAL_TTIN; + + case LINUX_SIGTTOU: + return GDB_SIGNAL_TTOU; + + case LINUX_SIGURG: + return GDB_SIGNAL_URG; + + case LINUX_SIGXCPU: + return GDB_SIGNAL_XCPU; + + case LINUX_SIGXFSZ: + return GDB_SIGNAL_XFSZ; + + case LINUX_SIGVTALRM: + return GDB_SIGNAL_VTALRM; + + case LINUX_SIGPROF: + return GDB_SIGNAL_PROF; + + case LINUX_SIGWINCH: + return GDB_SIGNAL_WINCH; + + /* No way to differentiate between SIGIO and SIGPOLL. + Therefore, we just handle the first one. */ + case LINUX_SIGIO: + return GDB_SIGNAL_IO; + + case LINUX_SIGPWR: + return GDB_SIGNAL_PWR; + + case LINUX_SIGSYS: + return GDB_SIGNAL_SYS; + + /* SIGRTMIN and SIGRTMAX are not continuous in <gdb/signals.def>, + therefore we have to handle them here. */ + case LINUX_SIGRTMIN: + return GDB_SIGNAL_REALTIME_32; + + case LINUX_SIGRTMAX: + return GDB_SIGNAL_REALTIME_64; + } + + if (signal >= LINUX_SIGRTMIN + 1 && signal <= LINUX_SIGRTMAX - 1) + { + int offset = signal - LINUX_SIGRTMIN + 1; + + return (enum gdb_signal) ((int) GDB_SIGNAL_REALTIME_33 + offset); + } + + return GDB_SIGNAL_UNKNOWN; +} + +/* Implementation of `gdbarch_gdb_signal_to_target', as defined in + gdbarch.h. This function is not static because it is exported to + other -tdep files. */ + +int +linux_gdb_signal_to_target (struct gdbarch *gdbarch, + enum gdb_signal signal) +{ + switch (signal) + { + case GDB_SIGNAL_0: + return 0; + + case GDB_SIGNAL_HUP: + return LINUX_SIGHUP; + + case GDB_SIGNAL_INT: + return LINUX_SIGINT; + + case GDB_SIGNAL_QUIT: + return LINUX_SIGQUIT; + + case GDB_SIGNAL_ILL: + return LINUX_SIGILL; + + case GDB_SIGNAL_TRAP: + return LINUX_SIGTRAP; + + case GDB_SIGNAL_ABRT: + return LINUX_SIGABRT; + + case GDB_SIGNAL_FPE: + return LINUX_SIGFPE; + + case GDB_SIGNAL_KILL: + return LINUX_SIGKILL; + + case GDB_SIGNAL_BUS: + return LINUX_SIGBUS; + + case GDB_SIGNAL_SEGV: + return LINUX_SIGSEGV; + + case GDB_SIGNAL_SYS: + return LINUX_SIGSYS; + + case GDB_SIGNAL_PIPE: + return LINUX_SIGPIPE; + + case GDB_SIGNAL_ALRM: + return LINUX_SIGALRM; + + case GDB_SIGNAL_TERM: + return LINUX_SIGTERM; + + case GDB_SIGNAL_URG: + return LINUX_SIGURG; + + case GDB_SIGNAL_STOP: + return LINUX_SIGSTOP; + + case GDB_SIGNAL_TSTP: + return LINUX_SIGTSTP; + + case GDB_SIGNAL_CONT: + return LINUX_SIGCONT; + + case GDB_SIGNAL_CHLD: + return LINUX_SIGCHLD; + + case GDB_SIGNAL_TTIN: + return LINUX_SIGTTIN; + + case GDB_SIGNAL_TTOU: + return LINUX_SIGTTOU; + + case GDB_SIGNAL_IO: + return LINUX_SIGIO; + + case GDB_SIGNAL_XCPU: + return LINUX_SIGXCPU; + + case GDB_SIGNAL_XFSZ: + return LINUX_SIGXFSZ; + + case GDB_SIGNAL_VTALRM: + return LINUX_SIGVTALRM; + + case GDB_SIGNAL_PROF: + return LINUX_SIGPROF; + + case GDB_SIGNAL_WINCH: + return LINUX_SIGWINCH; + + case GDB_SIGNAL_USR1: + return LINUX_SIGUSR1; + + case GDB_SIGNAL_USR2: + return LINUX_SIGUSR2; + + case GDB_SIGNAL_PWR: + return LINUX_SIGPWR; + + case GDB_SIGNAL_POLL: + return LINUX_SIGPOLL; + + /* GDB_SIGNAL_REALTIME_32 is not continuous in <gdb/signals.def>, + therefore we have to handle it here. */ + case GDB_SIGNAL_REALTIME_32: + return LINUX_SIGRTMIN; + + /* Same comment applies to _64. */ + case GDB_SIGNAL_REALTIME_64: + return LINUX_SIGRTMAX; + } + + /* GDB_SIGNAL_REALTIME_33 to _64 are continuous. */ + if (signal >= GDB_SIGNAL_REALTIME_33 + && signal <= GDB_SIGNAL_REALTIME_63) + { + int offset = signal - GDB_SIGNAL_REALTIME_33; + + return LINUX_SIGRTMIN + 1 + offset; + } + + return -1; +} + /* To be called from the various GDB_OSABI_LINUX handlers for the various GNU/Linux architectures and machine types. */ @@ -1460,6 +1776,10 @@ linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) set_gdbarch_make_corefile_notes (gdbarch, linux_make_corefile_notes_1); set_gdbarch_has_shared_address_space (gdbarch, linux_has_shared_address_space); + set_gdbarch_gdb_signal_from_target (gdbarch, + linux_gdb_signal_from_target); + set_gdbarch_gdb_signal_to_target (gdbarch, + linux_gdb_signal_to_target); } /* Provide a prototype to silence -Wmissing-prototypes. */ |