aboutsummaryrefslogtreecommitdiff
path: root/gdb/i386-tdep.c
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/i386-tdep.c')
-rw-r--r--gdb/i386-tdep.c231
1 files changed, 147 insertions, 84 deletions
diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
index 2744b40..cc727c8 100644
--- a/gdb/i386-tdep.c
+++ b/gdb/i386-tdep.c
@@ -472,21 +472,123 @@ i386_skip_probe (CORE_ADDR pc)
return pc;
}
+/* Maximum instruction length we need to handle. */
+#define I386_MAX_INSN_LEN 6
+
+/* Instruction description. */
+struct i386_insn
+{
+ size_t len;
+ unsigned char insn[I386_MAX_INSN_LEN];
+ unsigned char mask[I386_MAX_INSN_LEN];
+};
+
+/* Search for the instruction at PC in the list SKIP_INSNS. Return
+ the first instruction description that matches. Otherwise, return
+ NULL. */
+
+static struct i386_insn *
+i386_match_insn (CORE_ADDR pc, struct i386_insn *skip_insns)
+{
+ struct i386_insn *insn;
+ unsigned char op;
+
+ op = read_memory_unsigned_integer (pc, 1);
+
+ for (insn = skip_insns; insn->len > 0; insn++)
+ {
+ if ((op & insn->mask[0]) == insn->insn[0])
+ {
+ unsigned char buf[I386_MAX_INSN_LEN - 1];
+ size_t i;
+
+ gdb_assert (insn->len > 1);
+ gdb_assert (insn->len <= I386_MAX_INSN_LEN);
+
+ read_memory (pc + 1, buf, insn->len - 1);
+ for (i = 1; i < insn->len; i++)
+ {
+ if ((buf[i - 1] & insn->mask[i]) != insn->insn[i])
+ break;
+
+ return insn;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/* Some special instructions that might be migrated by GCC into the
+ part of the prologue that sets up the new stack frame. Because the
+ stack frame hasn't been setup yet, no registers have been saved
+ yet, and only the scratch registers %eax, %ecx and %edx can be
+ touched. */
+
+struct i386_insn i386_frame_setup_skip_insns[] =
+{
+ /* Check for `movb imm8, r' and `movl imm32, r'.
+
+ ??? Should we handle 16-bit operand-sizes here? */
+
+ /* `movb imm8, %al' and `movb imm8, %ah' */
+ /* `movb imm8, %cl' and `movb imm8, %ch' */
+ { 2, { 0xb0, 0x00 }, { 0xfa, 0x00 } },
+ /* `movb imm8, %dl' and `movb imm8, %dh' */
+ { 2, { 0xb2, 0x00 }, { 0xfb, 0x00 } },
+ /* `movl imm32, %eax' and `movl imm32, %ecx' */
+ { 5, { 0xb8 }, { 0xfe } },
+ /* `movl imm32, %edx' */
+ { 5, { 0xba }, { 0xff } },
+
+ /* Check for `mov imm32, r32'. Note that there is an alternative
+ encoding for `mov m32, %eax'.
+
+ ??? Should we handle SIB adressing here?
+ ??? Should we handle 16-bit operand-sizes here? */
+
+ /* `movl m32, %eax' */
+ { 5, { 0xa1 }, { 0xff } },
+ /* `movl m32, %eax' and `mov; m32, %ecx' */
+ { 6, { 0x89, 0x05 }, {0xff, 0xf7 } },
+ /* `movl m32, %edx' */
+ { 6, { 0x89, 0x15 }, {0xff, 0xff } },
+
+ /* Check for `xorl r32, r32' and the equivalent `subl r32, r32'.
+ Because of the symmetry, there are actually two ways to encode
+ these instructions; opcode bytes 0x29 and 0x2b for `subl' and
+ opcode bytes 0x31 and 0x33 for `xorl'. */
+
+ /* `subl %eax, %eax' */
+ { 2, { 0x29, 0xc0 }, { 0xfd, 0xff } },
+ /* `subl %ecx, %ecx' */
+ { 2, { 0x29, 0xc9 }, { 0xfd, 0xff } },
+ /* `subl %edx, %edx' */
+ { 2, { 0x29, 0xd2 }, { 0xfd, 0xff } },
+ /* `xorl %eax, %eax' */
+ { 2, { 0x31, 0xc0 }, { 0xfd, 0xff } },
+ /* `xorl %ecx, %ecx' */
+ { 2, { 0x31, 0xc9 }, { 0xfd, 0xff } },
+ /* `xorl %edx, %edx' */
+ { 2, { 0x31, 0xd2 }, { 0xfd, 0xff } },
+ { 0 }
+};
+
/* Check whether PC points at a code that sets up a new stack frame.
If so, it updates CACHE and returns the address of the first
- instruction after the sequence that sets removes the "hidden"
- argument from the stack or CURRENT_PC, whichever is smaller.
- Otherwise, return PC. */
+ instruction after the sequence that sets up the frame or LIMIT,
+ whichever is smaller. If we don't recognize the code, return PC. */
static CORE_ADDR
-i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc,
+i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR limit,
struct i386_frame_cache *cache)
{
+ struct i386_insn *insn;
unsigned char op;
int skip = 0;
- if (current_pc <= pc)
- return current_pc;
+ if (limit <= pc)
+ return limit;
op = read_memory_unsigned_integer (pc, 1);
@@ -496,87 +598,48 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc,
starts this instruction sequence. */
cache->saved_regs[I386_EBP_REGNUM] = 0;
cache->sp_offset += 4;
+ pc++;
/* If that's all, return now. */
- if (current_pc <= pc + 1)
- return current_pc;
-
- op = read_memory_unsigned_integer (pc + 1, 1);
+ if (limit <= pc)
+ return limit;
/* Check for some special instructions that might be migrated by
- GCC into the prologue. At this point in the prologue, code
- should only touch the scratch registers %eax, %ecx and %edx,
- so we check for
-
- movl $XXX, %eax
- movl $XXX, %ecx
- movl $XXX, %edx
-
- These instructions have opcodes 0xb8, 0xb9 and 0xba.
-
- We also check for
-
- xorl %eax, %eax
- xorl %ecx, %ecx
- xorl %edx, %edx
-
- and the equivalent
-
- subl %eax, %eax
- subl %ecx, %ecx
- subl %edx, %edx
-
- Because of the symmetry, there are actually two ways to
- encode these instructions; with opcode bytes 0x29 and 0x2b
- for `subl' and opcode bytes 0x31 and 0x33 for `xorl'.
+ GCC into the prologue and skip them. At this point in the
+ prologue, code should only touch the scratch registers %eax,
+ %ecx and %edx, so while the number of posibilities is sheer,
+ it is limited.
Make sure we only skip these instructions if we later see the
`movl %esp, %ebp' that actually sets up the frame. */
- while ((op >= 0xb8 && op <= 0xba)
- || op == 0x29 || op == 0x2b
- || op == 0x31 || op == 0x33)
+ while (pc + skip < limit)
{
- if (op >= 0xb8 && op <= 0xba)
- {
- /* Skip the `movl' instructions cited above. */
- skip += 5;
- }
- else
- {
- /* Skip the `subl' and `xorl' instructions cited above. */
- op = read_memory_unsigned_integer (pc + skip + 2, 1);
- switch (op)
- {
- case 0xc0: /* %eax */
- case 0xc9: /* %ecx */
- case 0xd2: /* %edx */
- skip += 2;
- break;
- default:
- return pc + 1;
- }
- }
+ insn = i386_match_insn (pc + skip, i386_frame_setup_skip_insns);
+ if (insn == NULL)
+ break;
- /* If that's all, return now. */
- if (current_pc <= pc + skip + 1)
- return current_pc;
-
- op = read_memory_unsigned_integer (pc + skip + 1, 1);
+ skip += insn->len;
}
+ /* If that's all, return now. */
+ if (limit <= pc + skip)
+ return limit;
+
+ op = read_memory_unsigned_integer (pc + skip, 1);
+
/* Check for `movl %esp, %ebp' -- can be written in two ways. */
switch (op)
{
case 0x8b:
- if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xec)
- return pc + 1;
+ if (read_memory_unsigned_integer (pc + skip + 1, 1) != 0xec)
+ return pc;
break;
case 0x89:
- if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xe5)
- return pc + 1;
+ if (read_memory_unsigned_integer (pc + skip + 1, 1) != 0xe5)
+ return pc;
break;
default:
- return pc + 1;
+ return pc;
}
/* OK, we actually have a frame. We just don't know how large
@@ -584,11 +647,11 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc,
necessary. We also now commit to skipping the special
instructions mentioned before. */
cache->locals = 0;
- pc += skip;
+ pc += (skip + 2);
/* If that's all, return now. */
- if (current_pc <= pc + 3)
- return current_pc;
+ if (limit <= pc)
+ return limit;
/* Check for stack adjustment
@@ -596,37 +659,37 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc,
NOTE: You can't subtract a 16-bit immediate from a 32-bit
reg, so we don't have to worry about a data16 prefix. */
- op = read_memory_unsigned_integer (pc + 3, 1);
+ op = read_memory_unsigned_integer (pc, 1);
if (op == 0x83)
{
/* `subl' with 8-bit immediate. */
- if (read_memory_unsigned_integer (pc + 4, 1) != 0xec)
+ if (read_memory_unsigned_integer (pc + 1, 1) != 0xec)
/* Some instruction starting with 0x83 other than `subl'. */
- return pc + 3;
+ return pc;
- /* `subl' with signed byte immediate (though it wouldn't make
- sense to be negative). */
- cache->locals = read_memory_integer (pc + 5, 1);
- return pc + 6;
+ /* `subl' with signed 8-bit immediate (though it wouldn't
+ make sense to be negative). */
+ cache->locals = read_memory_integer (pc + 2, 1);
+ return pc + 3;
}
else if (op == 0x81)
{
/* Maybe it is `subl' with a 32-bit immediate. */
- if (read_memory_unsigned_integer (pc + 4, 1) != 0xec)
+ if (read_memory_unsigned_integer (pc + 1, 1) != 0xec)
/* Some instruction starting with 0x81 other than `subl'. */
- return pc + 3;
+ return pc;
/* It is `subl' with a 32-bit immediate. */
- cache->locals = read_memory_integer (pc + 5, 4);
- return pc + 9;
+ cache->locals = read_memory_integer (pc + 2, 4);
+ return pc + 6;
}
else
{
/* Some instruction other than `subl'. */
- return pc + 3;
+ return pc;
}
}
- else if (op == 0xc8) /* enter $XXX */
+ else if (op == 0xc8) /* enter */
{
cache->locals = read_memory_unsigned_integer (pc + 1, 2);
return pc + 4;