diff options
Diffstat (limited to 'gdb/expression.h')
| -rw-r--r-- | gdb/expression.h | 591 |
1 files changed, 296 insertions, 295 deletions
diff --git a/gdb/expression.h b/gdb/expression.h index 52471c5..4408e8d 100644 --- a/gdb/expression.h +++ b/gdb/expression.h @@ -1,27 +1,28 @@ /* Definitions for expressions stored in reversed prefix form, for GDB. Copyright 1986, 1989, 1992, 1994 Free Software Foundation, Inc. -This file is part of GDB. + This file is part of GDB. -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ #if !defined (EXPRESSION_H) #define EXPRESSION_H 1 -#include "symtab.h" /* Needed for "struct block" type. */ +#include "symtab.h" /* Needed for "struct block" type. */ /* Definitions for saved C expressions. */ @@ -40,288 +41,288 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ by the preceding opcode. */ enum exp_opcode -{ - /* Used when it's necessary to pass an opcode which will be ignored, - or to catch uninitialized values. */ - OP_NULL, + { + /* Used when it's necessary to pass an opcode which will be ignored, + or to catch uninitialized values. */ + OP_NULL, /* BINOP_... operate on two values computed by following subexpressions, replacing them by one result value. They take no immediate arguments. */ - BINOP_ADD, /* + */ - BINOP_SUB, /* - */ - BINOP_MUL, /* * */ - BINOP_DIV, /* / */ - BINOP_REM, /* % */ - BINOP_MOD, /* mod (Knuth 1.2.4) */ - BINOP_LSH, /* << */ - BINOP_RSH, /* >> */ - BINOP_LOGICAL_AND, /* && */ - BINOP_LOGICAL_OR, /* || */ - BINOP_BITWISE_AND, /* & */ - BINOP_BITWISE_IOR, /* | */ - BINOP_BITWISE_XOR, /* ^ */ - BINOP_EQUAL, /* == */ - BINOP_NOTEQUAL, /* != */ - BINOP_LESS, /* < */ - BINOP_GTR, /* > */ - BINOP_LEQ, /* <= */ - BINOP_GEQ, /* >= */ - BINOP_REPEAT, /* @ */ - BINOP_ASSIGN, /* = */ - BINOP_COMMA, /* , */ - BINOP_SUBSCRIPT, /* x[y] */ - BINOP_EXP, /* Exponentiation */ - - /* C++. */ - - BINOP_MIN, /* <? */ - BINOP_MAX, /* >? */ - BINOP_SCOPE, /* :: */ - - /* STRUCTOP_MEMBER is used for pointer-to-member constructs. - X . * Y translates into X STRUCTOP_MEMBER Y. */ - STRUCTOP_MEMBER, - - /* STRUCTOP_MPTR is used for pointer-to-member constructs - when X is a pointer instead of an aggregate. */ - STRUCTOP_MPTR, - - /* end of C++. */ - - /* For Modula-2 integer division DIV */ - BINOP_INTDIV, - - BINOP_ASSIGN_MODIFY, /* +=, -=, *=, and so on. - The following exp_element is another opcode, - a BINOP_, saying how to modify. - Then comes another BINOP_ASSIGN_MODIFY, - making three exp_elements in total. */ - - /* Modula-2 standard (binary) procedures */ - BINOP_VAL, - BINOP_INCL, - BINOP_EXCL, - - /* Concatenate two operands, such as character strings or bitstrings. - If the first operand is a integer expression, then it means concatenate - the second operand with itself that many times. */ - BINOP_CONCAT, - - /* For Chill and Pascal. */ - BINOP_IN, /* Returns 1 iff ARG1 IN ARG2. */ - - /* This is the "colon operator" used various places in Chill. */ - BINOP_RANGE, - - /* This must be the highest BINOP_ value, for expprint.c. */ - BINOP_END, - - /* Operates on three values computed by following subexpressions. */ - TERNOP_COND, /* ?: */ - - /* A sub-string/sub-array. Chill syntax: OP1(OP2:OP3). - Return elements OP2 through OP3 of OP1. */ - TERNOP_SLICE, - - /* A sub-string/sub-array. Chill syntax: OP1(OP2 UP OP3). - Return OP3 elements of OP1, starting with element OP2. */ - TERNOP_SLICE_COUNT, - - /* Multidimensional subscript operator, such as Modula-2 x[a,b,...]. - The dimensionality is encoded in the operator, like the number of - function arguments in OP_FUNCALL, I.E. <OP><dimension><OP>. - The value of the first following subexpression is subscripted - by each of the next following subexpressions, one per dimension. */ - MULTI_SUBSCRIPT, - - /* The OP_... series take immediate following arguments. - After the arguments come another OP_... (the same one) - so that the grouping can be recognized from the end. */ - - /* OP_LONG is followed by a type pointer in the next exp_element - and the long constant value in the following exp_element. - Then comes another OP_LONG. - Thus, the operation occupies four exp_elements. */ - OP_LONG, - - /* OP_DOUBLE is similar but takes a DOUBLEST constant instead of a long. */ - OP_DOUBLE, - - /* OP_VAR_VALUE takes one struct block * in the following element, - and one struct symbol * in the following exp_element, followed by - another OP_VAR_VALUE, making four exp_elements. If the block is - non-NULL, evaluate the symbol relative to the innermost frame - executing in that block; if the block is NULL use the selected frame. */ - OP_VAR_VALUE, - - /* OP_LAST is followed by an integer in the next exp_element. - The integer is zero for the last value printed, - or it is the absolute number of a history element. - With another OP_LAST at the end, this makes three exp_elements. */ - OP_LAST, - - /* OP_REGISTER is followed by an integer in the next exp_element. - This is the number of a register to fetch (as an int). - With another OP_REGISTER at the end, this makes three exp_elements. */ - OP_REGISTER, - - /* OP_INTERNALVAR is followed by an internalvar ptr in the next exp_element. - With another OP_INTERNALVAR at the end, this makes three exp_elements. */ - OP_INTERNALVAR, - - /* OP_FUNCALL is followed by an integer in the next exp_element. - The integer is the number of args to the function call. - That many plus one values from following subexpressions - are used, the first one being the function. - The integer is followed by a repeat of OP_FUNCALL, - making three exp_elements. */ - OP_FUNCALL, - - /* This is EXACTLY like OP_FUNCALL but is semantically different. - In F77, array subscript expressions, substring expressions - and function calls are all exactly the same syntactically. They may - only be dismabiguated at runtime. Thus this operator, which - indicates that we have found something of the form <name> ( <stuff> ) */ - OP_F77_UNDETERMINED_ARGLIST, - - /* The following OP is a special one, it introduces a F77 complex - literal. It is followed by exactly two args that are doubles. */ - OP_COMPLEX, - - /* OP_STRING represents a string constant. - Its format is the same as that of a STRUCTOP, but the string - data is just made into a string constant when the operation - is executed. */ - OP_STRING, - - /* OP_BITSTRING represents a packed bitstring constant. - Its format is the same as that of a STRUCTOP, but the bitstring - data is just made into a bitstring constant when the operation - is executed. */ - OP_BITSTRING, - - /* OP_ARRAY creates an array constant out of the following subexpressions. - It is followed by two exp_elements, the first containing an integer - that is the lower bound of the array and the second containing another - integer that is the upper bound of the array. The second integer is - followed by a repeat of OP_ARRAY, making four exp_elements total. - The bounds are used to compute the number of following subexpressions - to consume, as well as setting the bounds in the created array constant. - The type of the elements is taken from the type of the first subexp, - and they must all match. */ - OP_ARRAY, - - /* UNOP_CAST is followed by a type pointer in the next exp_element. - With another UNOP_CAST at the end, this makes three exp_elements. - It casts the value of the following subexpression. */ - UNOP_CAST, - - /* UNOP_MEMVAL is followed by a type pointer in the next exp_element - With another UNOP_MEMVAL at the end, this makes three exp_elements. - It casts the contents of the word addressed by the value of the - following subexpression. */ - UNOP_MEMVAL, - - /* UNOP_... operate on one value from a following subexpression - and replace it with a result. They take no immediate arguments. */ - - UNOP_NEG, /* Unary - */ - UNOP_LOGICAL_NOT, /* Unary ! */ - UNOP_COMPLEMENT, /* Unary ~ */ - UNOP_IND, /* Unary * */ - UNOP_ADDR, /* Unary & */ - UNOP_PREINCREMENT, /* ++ before an expression */ - UNOP_POSTINCREMENT, /* ++ after an expression */ - UNOP_PREDECREMENT, /* -- before an expression */ - UNOP_POSTDECREMENT, /* -- after an expression */ - UNOP_SIZEOF, /* Unary sizeof (followed by expression) */ - - UNOP_PLUS, /* Unary plus */ - - UNOP_CAP, /* Modula-2 standard (unary) procedures */ - UNOP_CHR, - UNOP_ORD, - UNOP_ABS, - UNOP_FLOAT, - UNOP_HIGH, - UNOP_MAX, - UNOP_MIN, - UNOP_ODD, - UNOP_TRUNC, - - /* Chill builtin functions. */ - UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN, - - OP_BOOL, /* Modula-2 builtin BOOLEAN type */ - OP_M2_STRING, /* Modula-2 string constants */ - - /* STRUCTOP_... operate on a value from a following subexpression - by extracting a structure component specified by a string - that appears in the following exp_elements (as many as needed). - STRUCTOP_STRUCT is used for "." and STRUCTOP_PTR for "->". - They differ only in the error message given in case the value is - not suitable or the structure component specified is not found. - - The length of the string follows the opcode, followed by - BYTES_TO_EXP_ELEM(length) elements containing the data of the - string, followed by the length again and the opcode again. */ - - STRUCTOP_STRUCT, - STRUCTOP_PTR, - - /* C++ */ - /* OP_THIS is just a placeholder for the class instance variable. - It just comes in a tight (OP_THIS, OP_THIS) pair. */ - OP_THIS, - - /* OP_SCOPE surrounds a type name and a field name. The type - name is encoded as one element, but the field name stays as - a string, which, of course, is variable length. */ - OP_SCOPE, - - /* Used to represent named structure field values in brace initializers - (or tuples as they are called in Chill). - The gcc C syntax is NAME:VALUE or .NAME=VALUE, the Chill syntax is - .NAME:VALUE. Multiple labels (as in the Chill syntax - .NAME1,.NAME2:VALUE) is represented as if it were - .NAME1:(.NAME2:VALUE) (though that is not valid Chill syntax). - - The NAME is represented as for STRUCTOP_STRUCT; VALUE follows. */ - OP_LABELED, - - /* OP_TYPE is for parsing types, and used with the "ptype" command - so we can look up types that are qualified by scope, either with - the GDB "::" operator, or the Modula-2 '.' operator. */ - OP_TYPE, - - /* An un-looked-up identifier. */ - OP_NAME, - - /* An unparsed expression. Used for Scheme (for now at least) */ - OP_EXPRSTRING -}; + BINOP_ADD, /* + */ + BINOP_SUB, /* - */ + BINOP_MUL, /* * */ + BINOP_DIV, /* / */ + BINOP_REM, /* % */ + BINOP_MOD, /* mod (Knuth 1.2.4) */ + BINOP_LSH, /* << */ + BINOP_RSH, /* >> */ + BINOP_LOGICAL_AND, /* && */ + BINOP_LOGICAL_OR, /* || */ + BINOP_BITWISE_AND, /* & */ + BINOP_BITWISE_IOR, /* | */ + BINOP_BITWISE_XOR, /* ^ */ + BINOP_EQUAL, /* == */ + BINOP_NOTEQUAL, /* != */ + BINOP_LESS, /* < */ + BINOP_GTR, /* > */ + BINOP_LEQ, /* <= */ + BINOP_GEQ, /* >= */ + BINOP_REPEAT, /* @ */ + BINOP_ASSIGN, /* = */ + BINOP_COMMA, /* , */ + BINOP_SUBSCRIPT, /* x[y] */ + BINOP_EXP, /* Exponentiation */ + + /* C++. */ + + BINOP_MIN, /* <? */ + BINOP_MAX, /* >? */ + BINOP_SCOPE, /* :: */ + + /* STRUCTOP_MEMBER is used for pointer-to-member constructs. + X . * Y translates into X STRUCTOP_MEMBER Y. */ + STRUCTOP_MEMBER, + + /* STRUCTOP_MPTR is used for pointer-to-member constructs + when X is a pointer instead of an aggregate. */ + STRUCTOP_MPTR, + + /* end of C++. */ + + /* For Modula-2 integer division DIV */ + BINOP_INTDIV, + + BINOP_ASSIGN_MODIFY, /* +=, -=, *=, and so on. + The following exp_element is another opcode, + a BINOP_, saying how to modify. + Then comes another BINOP_ASSIGN_MODIFY, + making three exp_elements in total. */ + + /* Modula-2 standard (binary) procedures */ + BINOP_VAL, + BINOP_INCL, + BINOP_EXCL, + + /* Concatenate two operands, such as character strings or bitstrings. + If the first operand is a integer expression, then it means concatenate + the second operand with itself that many times. */ + BINOP_CONCAT, + + /* For Chill and Pascal. */ + BINOP_IN, /* Returns 1 iff ARG1 IN ARG2. */ + + /* This is the "colon operator" used various places in Chill. */ + BINOP_RANGE, + + /* This must be the highest BINOP_ value, for expprint.c. */ + BINOP_END, + + /* Operates on three values computed by following subexpressions. */ + TERNOP_COND, /* ?: */ + + /* A sub-string/sub-array. Chill syntax: OP1(OP2:OP3). + Return elements OP2 through OP3 of OP1. */ + TERNOP_SLICE, + + /* A sub-string/sub-array. Chill syntax: OP1(OP2 UP OP3). + Return OP3 elements of OP1, starting with element OP2. */ + TERNOP_SLICE_COUNT, + + /* Multidimensional subscript operator, such as Modula-2 x[a,b,...]. + The dimensionality is encoded in the operator, like the number of + function arguments in OP_FUNCALL, I.E. <OP><dimension><OP>. + The value of the first following subexpression is subscripted + by each of the next following subexpressions, one per dimension. */ + MULTI_SUBSCRIPT, + + /* The OP_... series take immediate following arguments. + After the arguments come another OP_... (the same one) + so that the grouping can be recognized from the end. */ + + /* OP_LONG is followed by a type pointer in the next exp_element + and the long constant value in the following exp_element. + Then comes another OP_LONG. + Thus, the operation occupies four exp_elements. */ + OP_LONG, + + /* OP_DOUBLE is similar but takes a DOUBLEST constant instead of a long. */ + OP_DOUBLE, + + /* OP_VAR_VALUE takes one struct block * in the following element, + and one struct symbol * in the following exp_element, followed by + another OP_VAR_VALUE, making four exp_elements. If the block is + non-NULL, evaluate the symbol relative to the innermost frame + executing in that block; if the block is NULL use the selected frame. */ + OP_VAR_VALUE, + + /* OP_LAST is followed by an integer in the next exp_element. + The integer is zero for the last value printed, + or it is the absolute number of a history element. + With another OP_LAST at the end, this makes three exp_elements. */ + OP_LAST, + + /* OP_REGISTER is followed by an integer in the next exp_element. + This is the number of a register to fetch (as an int). + With another OP_REGISTER at the end, this makes three exp_elements. */ + OP_REGISTER, + + /* OP_INTERNALVAR is followed by an internalvar ptr in the next exp_element. + With another OP_INTERNALVAR at the end, this makes three exp_elements. */ + OP_INTERNALVAR, + + /* OP_FUNCALL is followed by an integer in the next exp_element. + The integer is the number of args to the function call. + That many plus one values from following subexpressions + are used, the first one being the function. + The integer is followed by a repeat of OP_FUNCALL, + making three exp_elements. */ + OP_FUNCALL, + + /* This is EXACTLY like OP_FUNCALL but is semantically different. + In F77, array subscript expressions, substring expressions + and function calls are all exactly the same syntactically. They may + only be dismabiguated at runtime. Thus this operator, which + indicates that we have found something of the form <name> ( <stuff> ) */ + OP_F77_UNDETERMINED_ARGLIST, + + /* The following OP is a special one, it introduces a F77 complex + literal. It is followed by exactly two args that are doubles. */ + OP_COMPLEX, + + /* OP_STRING represents a string constant. + Its format is the same as that of a STRUCTOP, but the string + data is just made into a string constant when the operation + is executed. */ + OP_STRING, + + /* OP_BITSTRING represents a packed bitstring constant. + Its format is the same as that of a STRUCTOP, but the bitstring + data is just made into a bitstring constant when the operation + is executed. */ + OP_BITSTRING, + + /* OP_ARRAY creates an array constant out of the following subexpressions. + It is followed by two exp_elements, the first containing an integer + that is the lower bound of the array and the second containing another + integer that is the upper bound of the array. The second integer is + followed by a repeat of OP_ARRAY, making four exp_elements total. + The bounds are used to compute the number of following subexpressions + to consume, as well as setting the bounds in the created array constant. + The type of the elements is taken from the type of the first subexp, + and they must all match. */ + OP_ARRAY, + + /* UNOP_CAST is followed by a type pointer in the next exp_element. + With another UNOP_CAST at the end, this makes three exp_elements. + It casts the value of the following subexpression. */ + UNOP_CAST, + + /* UNOP_MEMVAL is followed by a type pointer in the next exp_element + With another UNOP_MEMVAL at the end, this makes three exp_elements. + It casts the contents of the word addressed by the value of the + following subexpression. */ + UNOP_MEMVAL, + + /* UNOP_... operate on one value from a following subexpression + and replace it with a result. They take no immediate arguments. */ + + UNOP_NEG, /* Unary - */ + UNOP_LOGICAL_NOT, /* Unary ! */ + UNOP_COMPLEMENT, /* Unary ~ */ + UNOP_IND, /* Unary * */ + UNOP_ADDR, /* Unary & */ + UNOP_PREINCREMENT, /* ++ before an expression */ + UNOP_POSTINCREMENT, /* ++ after an expression */ + UNOP_PREDECREMENT, /* -- before an expression */ + UNOP_POSTDECREMENT, /* -- after an expression */ + UNOP_SIZEOF, /* Unary sizeof (followed by expression) */ + + UNOP_PLUS, /* Unary plus */ + + UNOP_CAP, /* Modula-2 standard (unary) procedures */ + UNOP_CHR, + UNOP_ORD, + UNOP_ABS, + UNOP_FLOAT, + UNOP_HIGH, + UNOP_MAX, + UNOP_MIN, + UNOP_ODD, + UNOP_TRUNC, + + /* Chill builtin functions. */ + UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN, + + OP_BOOL, /* Modula-2 builtin BOOLEAN type */ + OP_M2_STRING, /* Modula-2 string constants */ + + /* STRUCTOP_... operate on a value from a following subexpression + by extracting a structure component specified by a string + that appears in the following exp_elements (as many as needed). + STRUCTOP_STRUCT is used for "." and STRUCTOP_PTR for "->". + They differ only in the error message given in case the value is + not suitable or the structure component specified is not found. + + The length of the string follows the opcode, followed by + BYTES_TO_EXP_ELEM(length) elements containing the data of the + string, followed by the length again and the opcode again. */ + + STRUCTOP_STRUCT, + STRUCTOP_PTR, + + /* C++ */ + /* OP_THIS is just a placeholder for the class instance variable. + It just comes in a tight (OP_THIS, OP_THIS) pair. */ + OP_THIS, + + /* OP_SCOPE surrounds a type name and a field name. The type + name is encoded as one element, but the field name stays as + a string, which, of course, is variable length. */ + OP_SCOPE, + + /* Used to represent named structure field values in brace initializers + (or tuples as they are called in Chill). + The gcc C syntax is NAME:VALUE or .NAME=VALUE, the Chill syntax is + .NAME:VALUE. Multiple labels (as in the Chill syntax + .NAME1,.NAME2:VALUE) is represented as if it were + .NAME1:(.NAME2:VALUE) (though that is not valid Chill syntax). + + The NAME is represented as for STRUCTOP_STRUCT; VALUE follows. */ + OP_LABELED, + + /* OP_TYPE is for parsing types, and used with the "ptype" command + so we can look up types that are qualified by scope, either with + the GDB "::" operator, or the Modula-2 '.' operator. */ + OP_TYPE, + + /* An un-looked-up identifier. */ + OP_NAME, + + /* An unparsed expression. Used for Scheme (for now at least) */ + OP_EXPRSTRING + }; union exp_element -{ - enum exp_opcode opcode; - struct symbol *symbol; - LONGEST longconst; - DOUBLEST doubleconst; - /* Really sizeof (union exp_element) characters (or less for the last - element of a string). */ - char string; - struct type *type; - struct internalvar *internalvar; - struct block *block; -}; + { + enum exp_opcode opcode; + struct symbol *symbol; + LONGEST longconst; + DOUBLEST doubleconst; + /* Really sizeof (union exp_element) characters (or less for the last + element of a string). */ + char string; + struct type *type; + struct internalvar *internalvar; + struct block *block; + }; struct expression -{ - const struct language_defn *language_defn; /* language it was entered in */ - int nelts; - union exp_element elts[1]; -}; + { + const struct language_defn *language_defn; /* language it was entered in */ + int nelts; + union exp_element elts[1]; + }; /* Macros for converting between number of expression elements and bytes to store that many expression elements. */ @@ -347,10 +348,10 @@ extern struct block *innermost_block; /* Values of NOSIDE argument to eval_subexp. */ enum noside -{ - EVAL_NORMAL, - EVAL_SKIP, /* Only effect is to increment pos. */ - EVAL_AVOID_SIDE_EFFECTS /* Don't modify any variables or + { + EVAL_NORMAL, + EVAL_SKIP, /* Only effect is to increment pos. */ + EVAL_AVOID_SIDE_EFFECTS /* Don't modify any variables or call any functions. The value returned will have the correct type, and will have an @@ -359,10 +360,10 @@ enum noside listed as being in a register in the function in which it was declared will be lval_register). */ -}; + }; -extern struct value* evaluate_subexp_standard -PARAMS ((struct type *, struct expression *, int*, enum noside)); +extern struct value *evaluate_subexp_standard + PARAMS ((struct type *, struct expression *, int *, enum noside)); /* From expprint.c */ @@ -377,4 +378,4 @@ extern void dump_postfix_expression PARAMS ((struct expression *, GDB_FILE *, char *)); -#endif /* !defined (EXPRESSION_H) */ +#endif /* !defined (EXPRESSION_H) */ |