1 files changed, 0 insertions, 207 deletions
diff --git a/gdb/doc/gdb.invoc-m4 b/gdb/doc/gdb.invoc-m4
index 1ff32de..e69de29 100755
--- a/gdb/doc/gdb.invoc-m4
+++ b/gdb/doc/gdb.invoc-m4
@@ -1,207 +0,0 @@
-_dnl__								-*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Invocation, Commands, Sample Session, Top
-@chapter Getting In and Out of _GDBN__
-
-@menu
-* Starting _GDBN__::		Starting _GDBN__
-* Leaving _GDBN__::			Leaving _GDBN__
-* Shell Commands::		Shell Commands
-@end menu
-
-@node Starting _GDBN__, Leaving _GDBN__, Invocation, Invocation
-@section Starting _GDBN__
-
-_GDBN__ is invoked with the shell command @code{_GDBP__}.  Once started,
-it reads commands from the terminal until you tell it to exit.
-
-You can run @code{_GDBP__} with no arguments or options; but the most
-usual way to start _GDBN__ is with one argument or two, specifying an
-executable program as the argument:
-@example
-_GDBP__ program
-@end example
-@noindent
-You can also start with both an executable program and a core file specified:
-@example
-_GDBP__ program core
-@end example
-
-@noindent
-You can further control how _GDBN__ starts up by using command-line
-options.  _GDBN__ itself can remind you of the options available:
-@example
-_GDBP__ -help
-@end example
-@noindent
-will display all available options and briefly describe their use
-(@samp{_GDBP__ -h} is a shorter equivalent).
-
-All options and command line arguments you give are processed
-in sequential order.  The order makes a difference when the
-@samp{-x} option is used.  
-
-@menu
-* File Options::		Choosing Files
-* Mode Options::		Choosing Modes
-_if__(!_GENERIC__)
-_include__(gdb.inv.m-m4)_dnl__
-_fi__(!_GENERIC__)
-@end menu
-
-@node File Options, Mode Options, Starting _GDBN__, Starting _GDBN__
-@subsection Choosing Files
-
-As shown above, any arguments other than options specify an executable
-file and core file; that is, the first argument encountered with no
-associated option flag is equivalent to a @samp{-se} option, and the
-second, if any, is equivalent to a @samp{-c} option.  Many options have
-both long and short forms; both are shown here.  The long forms are also
-recognized if you truncate them, so long as enough of the option is
-present to be unambiguous.  (If you prefer, you can flag option
-arguments with @samp{+} rather than @samp{-}, though we illustrate the
-more usual convention.)
-
-@table @code
-@item -symbols=@var{file}
-@itemx -s @var{file}
-Read symbol table from file @var{file}.
-
-@item -exec=@var{file}
-@itemx -e @var{file}
-Use file @var{file} as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-@item -se @var{file}
-Read symbol table from file @var{file} and use it as the executable
-file.
-
-@item -core=@var{file}
-@itemx -c @var{file}
-Use file @var{file} as a core dump to examine.
-
-@item -command=@var{file}
-@itemx -x @var{file}
-Execute _GDBN__ commands from file @var{file}.  @xref{Command Files}.
-
-@item -directory=@var{directory}
-@itemx -d @var{directory}
-Add @var{directory} to the path to search for source files.
-@end table
-
-_if__(!_GENERIC__)
-@node Mode Options, i960-Nindy Remote, File Options, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node Mode Options,  , File Options, Starting _GDBN__
-_fi__(_GENERIC__)
-@subsection Choosing Modes
-
-@table @code
-@item -nx
-@itemx -n
-Do not execute commands from any @file{_GDBINIT__} initialization files.
-Normally, the commands in these files are executed after all the
-command options and arguments have been processed.  @xref{Command
-Files}.
-
-@item -quiet
-@itemx -q
-``Quiet''.  Do not print the introductory and copyright messages.  These
-messages are also suppressed in batch mode, or if an executable file name is
-specified on the _GDBN__ command line.
-
-@item -batch
-Run in batch mode.  Exit with status @code{0} after processing all the command
-files specified with @samp{-x} (and @file{_GDBINIT__}, if not inhibited).
-Exit with nonzero status if an error occurs in executing the _GDBN__
-commands in the command files.  
-
-Batch mode may be useful for running _GDBN__ as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message 
-@example
-Program exited normally.
-@end example
-@noindent
-(which is ordinarily issued whenever a program running under _GDBN__ control
-terminates) is not issued when running in batch mode.
-
-@item -cd @var{directory}
-Run _GDBN__ using @var{directory} as its working directory,
-instead of the current directory.
-
-@item -fullname
-@itemx -f
-This option is used when Emacs runs _GDBN__ as a subprocess.  It tells _GDBN__
-to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time the program stops).  This recognizable format looks
-like two @samp{\032} characters, followed by the file name, line number
-and character position separated by colons, and a newline.  The
-Emacs-to-_GDBN__ interface program uses the two @samp{\032} characters as
-a signal to display the source code for the frame.
-
-@item -b @var{bps}
-Set the line speed (baud rate or bits per second) of any serial
-interface used by _GDBN__ for remote debugging.
-
-@item -tty @var{device}
-Run using @var{device} for your program's standard input and output.
-@c FIXME: kingdon thinks there's more to -tty.  Investigate.
-@end table
-
-_if__(!_GENERIC__)
-_include__(gdb.inv.s-m4)
-_fi__(!_GENERIC__)
-
-@node Leaving _GDBN__, Shell Commands, Starting _GDBN__, Invocation
-@section Leaving _GDBN__
-@cindex exiting _GDBN__
-@table @code
-@item quit
-@kindex quit
-@kindex q
-To exit _GDBN__, use the @code{quit} command (abbreviated @code{q}), or type
-an end-of-file character (usually @kbd{C-d}).  
-@end table
-
-@cindex interrupt
-An interrupt (often @kbd{C-c}) will not exit from _GDBN__, but rather
-will terminate the action of any _GDBN__ command that is in progress and
-return to _GDBN__ command level.  It is safe to type the interrupt
-character at any time because _GDBN__ does not allow it to take effect
-until a time when it is safe.
-
-If you've been using _GDBN__ to control an attached process or device,
-you can release it with the @code{detach} command; @pxref{Attach}.
-
-@node Shell Commands,  , Leaving _GDBN__, Invocation
-@section Shell Commands
-If you just need to execute occasional shell commands during your
-debugging session, there's no need to leave or suspend _GDBN__; you can
-just use the @code{shell} command.
-
-@table @code
-@item shell @var{command string}
-@kindex shell
-@cindex shell escape
-Directs _GDBN__ to invoke an inferior shell to execute @var{command
-string}.  If it exists, the environment variable @code{SHELL} is used
-for the name of the shell to run.  Otherwise _GDBN__ uses
-@code{/bin/sh}.
-@end table
-
-The utility @code{make} is often needed in development environments.
-You don't have to use the @code{shell} command for this purpose in _GDBN__:
-
-@table @code
-@item make @var{make-args}
-@kindex make
-@cindex calling make
-Causes _GDBN__ to execute an inferior @code{make} program with the specified
-arguments.  This is equivalent to @samp{shell make @var{make-args}}.
-@end table