diff options
Diffstat (limited to 'gdb/config')
537 files changed, 27866 insertions, 0 deletions
diff --git a/gdb/config/a29k/a29k-kern.mt b/gdb/config/a29k/a29k-kern.mt new file mode 100644 index 0000000..f1a2e52 --- /dev/null +++ b/gdb/config/a29k/a29k-kern.mt @@ -0,0 +1,13 @@ +# Target: Remote AMD 29000 that runs Unix kernel on NYU Ultra3 processor board + +# This builds a gdb that should run on a host (we use sun3os4) that +# then communicates over the serial line to either an Adapt or MiniMon, +# for use in debugging Unix kernels. +# As compared to ordinary remote 29K debugging, this changes the register +# numbering a bit, to hold kernel regs, and adds support for looking at +# the upage. + +TDEPFILES= a29k-tdep.o remote-mm.o remote-adapt.o +TM_FILE= tm-ultra3.h + +MT_CFLAGS = -DKERNEL_DEBUGGING -DNO_HIF_SUPPORT diff --git a/gdb/config/a29k/a29k-udi.mt b/gdb/config/a29k/a29k-udi.mt new file mode 100644 index 0000000..15b33e6 --- /dev/null +++ b/gdb/config/a29k/a29k-udi.mt @@ -0,0 +1,5 @@ +# Target: AMD 29000 on EB29K board over a serial line +TDEPFILES= a29k-tdep.o remote-udi.o udip2soc.o udr.o udi2go32.o +TM_FILE= tm-a29k.h + +MT_CFLAGS = $(HOST_IPC) diff --git a/gdb/config/a29k/a29k.mt b/gdb/config/a29k/a29k.mt new file mode 100644 index 0000000..a3f5910 --- /dev/null +++ b/gdb/config/a29k/a29k.mt @@ -0,0 +1,5 @@ +# Target: AMD 29000 +TDEPFILES= a29k-tdep.o remote-eb.o remote-adapt.o +TM_FILE= tm-a29k.h + +MT_CFLAGS = -DNO_HIF_SUPPORT diff --git a/gdb/config/a29k/nm-ultra3.h b/gdb/config/a29k/nm-ultra3.h new file mode 100644 index 0000000..a3bc474 --- /dev/null +++ b/gdb/config/a29k/nm-ultra3.h @@ -0,0 +1,26 @@ +/* Host definitions for GDB running on an a29k NYU Ultracomputer + Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + Contributed by David Wood (wood@lab.ultra.nyu.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* If we ever *do* end up using the standard fetch_inferior_registers, + this is the right value for U_REGS_OFFSET. */ +#define U_REGS_OFFSET 0 + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS diff --git a/gdb/config/a29k/tm-a29k.h b/gdb/config/a29k/tm-a29k.h new file mode 100644 index 0000000..4892ec5 --- /dev/null +++ b/gdb/config/a29k/tm-a29k.h @@ -0,0 +1,707 @@ +/* Parameters for target machine AMD 29000, for GDB, the GNU debugger. + Copyright 1990, 1991, 1993, 1994 Free Software Foundation, Inc. + Contributed by Cygnus Support. Written by Jim Kingdon. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Parameters for an EB29K (a board which plugs into a PC and is + accessed through EBMON software running on the PC, which we + use as we'd use a remote stub (see remote-eb.c). + + If gdb is ported to other a29k machines/systems, the + machine/system-specific parts should be removed from this file (a + la tm-m68k.h). */ + +/* Byte order is configurable, but this machine runs big-endian. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Floating point uses IEEE representations. */ +#define IEEE_FLOAT + +/* Recognize our magic number. */ +#define BADMAG(x) ((x).f_magic != 0572) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ + { pc = skip_prologue (pc); } +CORE_ADDR skip_prologue (); + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) ((frame->flags & TRANSPARENT_FRAME) \ + ? read_register (TPC_REGNUM) \ + : read_register (LR0_REGNUM)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Stack must be aligned on 32-bit boundaries when synthesizing + function calls. */ + +#define STACK_ALIGN(ADDR) (((ADDR) + 3) & ~3) + +/* Sequence of bytes for breakpoint instruction. */ +/* ASNEQ 0x50, gr1, gr1 + The trap number 0x50 is chosen arbitrarily. + We let the command line (or previously included files) override this + setting. */ +#ifndef BREAKPOINT +#if TARGET_BYTE_ORDER == BIG_ENDIAN +#define BREAKPOINT {0x72, 0x50, 0x01, 0x01} +#else /* Target is little-endian. */ +#define BREAKPOINT {0x01, 0x01, 0x50, 0x72} +#endif /* Target is little-endian. */ +#endif /* BREAKPOINT */ + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Allow the register declarations here to be overridden for remote + kernel debugging. */ +#if !defined (REGISTER_NAMES) + +/* Number of machine registers */ + +#define NUM_REGS 205 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. + + FIXME, add floating point registers and support here. + + Also note that this list does not attempt to deal with kernel + debugging (in which the first 32 registers are gr64-gr95). */ + +#define REGISTER_NAMES \ +{"gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \ + "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \ + "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \ + "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127", \ + "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9", \ + "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \ + "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \ + "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \ + "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \ + "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \ + "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \ + "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \ + "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \ + "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \ + "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \ + "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \ + "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \ + "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \ + "lr124", "lr125", "lr126", "lr127", \ + "AI0", "AI1", "AI2", "AI3", "AI4", "AI5", "AI6", "AI7", "AI8", "AI9", \ + "AI10", "AI11", "AI12", "AI13", "AI14", "AI15", "FP", \ + "bp", "fc", "cr", "q", \ + "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr", \ + "pc0", "pc1", "pc2", "mmu", "lru", "fpe", "inte", "fps", "exo", "gr1", \ + "alu", "ipc", "ipa", "ipb" } + +/* + * Converts an sdb register number to an internal gdb register number. + * Currently under epi, gr96->0...gr127->31...lr0->32...lr127->159, or... + * gr64->0...gr95->31, lr0->32...lr127->159. + */ +#define SDB_REG_TO_REGNUM(value) \ + (((value) >= 96 && (value) <= 127) ? ((value) - 96) : \ + ((value) >= 128 && (value) <= 255) ? ((value) - 128 + LR0_REGNUM) : \ + (value)) + +/* + * Provide the processor register numbers of some registers that are + * expected/written in instructions that might change under different + * register sets. Namely, gcc can compile (-mkernel-registers) so that + * it uses gr64-gr95 in stead of gr96-gr127. + */ +#define MSP_HW_REGNUM 125 /* gr125 */ +#define RAB_HW_REGNUM 126 /* gr126 */ + +/* Convert Processor Special register #x to REGISTER_NAMES register # */ +#define SR_REGNUM(x) \ + ((x) < 15 ? VAB_REGNUM + (x) \ + : (x) >= 128 && (x) < 131 ? IPC_REGNUM + (x) - 128 \ + : (x) == 131 ? Q_REGNUM \ + : (x) == 132 ? ALU_REGNUM \ + : (x) >= 133 && (x) < 136 ? BP_REGNUM + (x) - 133 \ + : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x) - 160 \ + : (x) == 164 ? EXO_REGNUM \ + : (error ("Internal error in SR_REGNUM"), 0)) +#define GR96_REGNUM 0 + +/* Define the return register separately, so it can be overridden for + kernel procedure calling conventions. */ +#define RETURN_REGNUM GR96_REGNUM +#define GR1_REGNUM 200 +/* This needs to be the memory stack pointer, not the register stack pointer, + to make call_function work right. */ +#define SP_REGNUM MSP_REGNUM +#define FP_REGNUM 33 /* lr1 */ + +/* Return register for transparent calling convention (gr122). */ +#define TPC_REGNUM (122 - 96 + GR96_REGNUM) + +/* Large Return Pointer (gr123). */ +#define LRP_REGNUM (123 - 96 + GR96_REGNUM) + +/* Static link pointer (gr124). */ +#define SLP_REGNUM (124 - 96 + GR96_REGNUM) + +/* Memory Stack Pointer (gr125). */ +#define MSP_REGNUM (125 - 96 + GR96_REGNUM) + +/* Register allocate bound (gr126). */ +#define RAB_REGNUM (126 - 96 + GR96_REGNUM) + +/* Register Free Bound (gr127). */ +#define RFB_REGNUM (127 - 96 + GR96_REGNUM) + +/* Register Stack Pointer. */ +#define RSP_REGNUM GR1_REGNUM +#define LR0_REGNUM 32 +#define BP_REGNUM 177 +#define FC_REGNUM 178 +#define CR_REGNUM 179 +#define Q_REGNUM 180 +#define VAB_REGNUM 181 +#define OPS_REGNUM (VAB_REGNUM + 1) +#define CPS_REGNUM (VAB_REGNUM + 2) +#define CFG_REGNUM (VAB_REGNUM + 3) +#define CHA_REGNUM (VAB_REGNUM + 4) +#define CHD_REGNUM (VAB_REGNUM + 5) +#define CHC_REGNUM (VAB_REGNUM + 6) +#define RBP_REGNUM (VAB_REGNUM + 7) +#define TMC_REGNUM (VAB_REGNUM + 8) +#define TMR_REGNUM (VAB_REGNUM + 9) +#define NPC_REGNUM (VAB_REGNUM + 10) /* pc0 */ +#define PC_REGNUM (VAB_REGNUM + 11) /* pc1 */ +#define PC2_REGNUM (VAB_REGNUM + 12) +#define MMU_REGNUM (VAB_REGNUM + 13) +#define LRU_REGNUM (VAB_REGNUM + 14) +#define FPE_REGNUM (VAB_REGNUM + 15) +#define INTE_REGNUM (VAB_REGNUM + 16) +#define FPS_REGNUM (VAB_REGNUM + 17) +#define EXO_REGNUM (VAB_REGNUM + 18) +/* gr1 is defined above as 200 = VAB_REGNUM + 19 */ +#define ALU_REGNUM (VAB_REGNUM + 20) +#define PS_REGNUM ALU_REGNUM +#define IPC_REGNUM (VAB_REGNUM + 21) +#define IPA_REGNUM (VAB_REGNUM + 22) +#define IPB_REGNUM (VAB_REGNUM + 23) + +#endif /* !defined(REGISTER_NAMES) */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +/* All regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) (4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +/* All regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) (4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE (4) + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE (4) + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) == PC_REGNUM || (N) == LRP_REGNUM || (N) == SLP_REGNUM \ + || (N) == MSP_REGNUM || (N) == RAB_REGNUM || (N) == RFB_REGNUM \ + || (N) == GR1_REGNUM || (N) == FP_REGNUM || (N) == LR0_REGNUM \ + || (N) == NPC_REGNUM || (N) == PC2_REGNUM) \ + ? lookup_pointer_type (builtin_type_void) : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ +/* On the a29k the LRP points to the part of the structure beyond the first + 16 words. */ +#define STORE_STRUCT_RETURN(ADDR, SP) \ + write_register (LRP_REGNUM, (ADDR) + 16 * 4); + +/* Should call_function allocate stack space for a struct return? */ +/* On the a29k objects over 16 words require the caller to allocate space. */ +extern use_struct_convention_fn a29k_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) a29k_use_struct_convention (gcc_p, type) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + { \ + int reg_length = TYPE_LENGTH (TYPE); \ + if (reg_length > 16 * 4) \ + { \ + reg_length = 16 * 4; \ + read_memory (*((int *)(REGBUF) + LRP_REGNUM), (VALBUF) + 16 * 4, \ + TYPE_LENGTH (TYPE) - 16 * 4); \ + } \ + memcpy ((VALBUF), ((int *)(REGBUF))+RETURN_REGNUM, reg_length); \ + } + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { \ + int reg_length = TYPE_LENGTH (TYPE); \ + if (reg_length > 16 * 4) \ + { \ + reg_length = 16 * 4; \ + write_memory (read_register (LRP_REGNUM), \ + (char *)(VALBUF) + 16 * 4, \ + TYPE_LENGTH (TYPE) - 16 * 4); \ + } \ + write_register_bytes (REGISTER_BYTE (RETURN_REGNUM), (char *)(VALBUF), \ + TYPE_LENGTH (TYPE)); \ + } + +/* The a29k user's guide documents well what the stacks look like. + But what isn't so clear there is how this interracts with the + symbols, or with GDB. + In the following saved_msp, saved memory stack pointer (which functions + as a memory frame pointer), means either + a register containing the memory frame pointer or, in the case of + functions with fixed size memory frames (i.e. those who don't use + alloca()), the result of the calculation msp + msize. + + LOC_ARG, LOC_LOCAL - For GCC, these are relative to saved_msp. + For high C, these are relative to msp (making alloca impossible). + LOC_REGISTER, LOC_REGPARM - The register number is the number at the + time the function is running (after the prologue), or in the case + of LOC_REGPARM, may be a register number in the range 160-175. + + The compilers do things like store an argument into memory, and then put out + a LOC_ARG for it, or put it into global registers and put out a + LOC_REGPARM. Thus is it important to execute the first line of + code (i.e. the line of the open brace, i.e. the prologue) of a function + before trying to print arguments or anything. + + The following diagram attempts to depict what is going on in memory + (see also the _a29k user's guide_) and also how that interacts with + GDB frames. We arbitrarily pick fci->frame to point the same place + as the register stack pointer; since we set it ourself in + INIT_EXTRA_FRAME_INFO, and access it only through the FRAME_* + macros, it doesn't really matter exactly how we + do it. However, note that FRAME_FP is used in two ways in GDB: + (1) as a "magic cookie" which uniquely identifies frames (even over + calls to the inferior), (2) (in PC_IN_CALL_DUMMY [ON_STACK]) + as the value of SP_REGNUM before the dummy frame was pushed. These + two meanings would be incompatible for the a29k if we defined + CALL_DUMMY_LOCATION == ON_STACK (but we don't, so don't worry about it). + Also note that "lr1" below, while called a frame pointer + in the user's guide, has only one function: To determine whether + registers need to be filled in the function epilogue. + + Consider the code: + < call bar> + loc1: . . . + bar: sub gr1,gr1,rsize_b + . . . + add mfp,msp,0 + sub msp,msp,msize_b + . . . + < call foo > + loc2: . . . + foo: sub gr1,gr1,rsize_f + . . . + add mfp,msp,0 + sub msp,msp,msize_f + . . . + loc3: < suppose the inferior stops here > + + memory stack register stack + | | |____________| + | | |____loc1____| + +------->|___________| | | ^ + | | ^ | | locals_b | | + | | | | |____________| | + | | | | | | | rsize_b + | | | msize_b | | args_to_f | | + | | | | |____________| | + | | | | |____lr1_____| V + | | V | |____loc2____|<----------------+ + | +--->|___________|<---------mfp | ^ | + | | | ^ | | locals_f | | | + | | | | msize_f | |____________| | | + | | | | | | | | rsize_f | + | | | V | | args | | | + | | |___________|<msp |____________| | | + | | |_____lr1____| V | + | | |___garbage__| <- gr1 <----+ | + | | | | + | | | | + | | pc=loc3 | | + | | | | + | | | | + | | frame cache | | + | | |_________________| | | + | | |rsize=rsize_b | | | + | | |msize=msize_b | | | + +---|--------saved_msp | | | + | |frame------------------------------------|---+ + | |pc=loc2 | | + | |_________________| | + | |rsize=rsize_f | | + | |msize=msize_f | | + +--------saved_msp | | + |frame------------------------------------+ + |pc=loc3 | + |_________________| + + So, is that sufficiently confusing? Welcome to the 29000. + Notes: + * The frame for foo uses a memory frame pointer but the frame for + bar does not. In the latter case the saved_msp is + computed by adding msize to the saved_msp of the + next frame. + * msize is in the frame cache only for high C's sake. */ + +void read_register_stack (); +long read_register_stack_integer (); + +#define FRAME_INIT_SAVED_REGS(fi) /*no-op*/ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR saved_msp; \ + unsigned int rsize; \ + unsigned int msize; \ + unsigned char flags; + +/* Bits for flags in EXTRA_FRAME_INFO */ +#define TRANSPARENT_FRAME 0x1 /* This is a transparent frame */ +#define MFP_USED 0x2 /* A memory frame pointer is used */ + +/* Because INIT_FRAME_PC gets passed fromleaf, that's where we init + not only ->pc and ->frame, but all the extra stuff, when called from + get_prev_frame_info, that is. */ +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci) +void init_extra_frame_info (); + +#define INIT_FRAME_PC(fromleaf, fci) init_frame_pc(fromleaf, fci) +void init_frame_pc (); + + +/* FRAME_CHAIN takes a FRAME + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +/* On the a29k, the nominal address of a frame is the address on the + register stack of the return address (the one next to the incoming + arguments, not down at the bottom so nominal address == stack pointer). + + GDB expects "nominal address" to equal contents of FP_REGNUM, + at least when it comes time to create the innermost frame. + However, that doesn't work for us, so when creating the innermost + frame we set ->frame ourselves in INIT_EXTRA_FRAME_INFO. */ + +/* These are mostly dummies for the a29k because INIT_FRAME_PC + sets prev->frame instead. */ +/* If rsize is zero, we must be at end of stack (or otherwise hosed). + If we don't check rsize, we loop forever if we see rsize == 0. */ +#define FRAME_CHAIN(thisframe) \ + ((thisframe)->rsize == 0 \ + ? 0 \ + : (thisframe)->frame + (thisframe)->rsize) + +/* Determine if the frame has a 'previous' and back-traceable frame. */ +#define FRAME_IS_UNCHAINED(frame) ((frame)->flags & TRANSPARENT_FRAME) + +/* Find the previous frame of a transparent routine. + * For now lets not try and trace through a transparent routine (we might + * have to assume that all transparent routines are traps). + */ +#define FIND_PREV_UNCHAINED_FRAME(frame) 0 + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +/* Saved pc (i.e. return address). */ +#define FRAME_SAVED_PC(fraim) \ + (read_register_stack_integer ((fraim)->frame + (fraim)->rsize, 4)) + +/* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their + offsets being relative to the memory stack pointer (high C) or + saved_msp (gcc). */ + +#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address (fi) +extern CORE_ADDR frame_locals_address (); + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ +/* We tried going to the effort of finding the tags word and getting + the argcount field from it, to support debugging assembler code. + Problem was, the "argcount" field never did hold the argument + count. */ +#define FRAME_NUM_ARGS(numargs, fi) ((numargs) = -1) + +#define FRAME_ARGS_ADDRESS(fi) FRAME_LOCALS_ADDRESS (fi) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Provide our own get_saved_register. HAVE_REGISTER_WINDOWS is insufficient + because registers get renumbered on the a29k without getting saved. */ + +#define GET_SAVED_REGISTER + +/* Call function stuff. */ + +/* The dummy frame looks like this (see also the general frame picture + above): + + register stack + + | | frame for function + | locals_sproc | executing at time + |________________| of call_function. + | | We must not disturb + | args_out_sproc | it. + memory stack |________________| + |____lr1_sproc___|<-+ + | | |__retaddr_sproc_| | <-- gr1 (at start) + |____________|<-msp 0 <-----------mfp_dummy_____| | + | | (at start) | save regs | | + | arg_slop | | pc0,pc1 | | + | | | pc2,lr0 sproc | | + | (16 words) | | gr96-gr124 | | + |____________|<-msp 1--after | sr160-sr162 | | + | | PUSH_DUMMY_FRAME| sr128-sr135 | | + | struct ret | |________________| | + | 17+ | | | | + |____________|<- lrp | args_out_dummy | | + | struct ret | | (16 words) | | + | 16 | |________________| | + | (16 words) | |____lr1_dummy___|--+ + |____________|<- msp 2--after |_retaddr_dummy__|<- gr1 after + | | struct ret | | PUSH_DUMMY_FRAME + | margs17+ | area allocated | locals_inf | + | | |________________| called + |____________|<- msp 4--when | | function's + | | inf called | args_out_inf | frame (set up + | margs16 | |________________| by called + | (16 words) | |_____lr1_inf____| function). + |____________|<- msp 3--after | . | + | | args pushed | . | + | | | . | + | | + + arg_slop: This area is so that when the call dummy adds 16 words to + the msp, it won't end up larger than mfp_dummy (it is needed in the + case where margs and struct_ret do not add up to at least 16 words). + struct ret: This area is allocated by GDB if the return value is more + than 16 words. struct ret_16 is not used on the a29k. + margs: Pushed by GDB. The call dummy copies the first 16 words to + args_out_dummy. + retaddr_sproc: Contains the PC at the time we call the function. + set by PUSH_DUMMY_FRAME and read by POP_FRAME. + retaddr_dummy: This points to a breakpoint instruction in the dummy. */ + +/* Rsize for dummy frame, in bytes. */ + +/* Bytes for outgoing args, lr1, and retaddr. */ +#define DUMMY_ARG (2 * 4 + 16 * 4) + +/* Number of special registers (sr128-) to save. */ +#define DUMMY_SAVE_SR128 8 +/* Number of special registers (sr160-) to save. */ +#define DUMMY_SAVE_SR160 3 +/* Number of general (gr96- or gr64-) registers to save. */ +#define DUMMY_SAVE_GREGS 29 + +#define DUMMY_FRAME_RSIZE \ +(4 /* mfp_dummy */ \ + + 4 * 4 /* pc0, pc1, pc2, lr0 */ \ + + DUMMY_SAVE_GREGS * 4 \ + + DUMMY_SAVE_SR160 * 4 \ + + DUMMY_SAVE_SR128 * 4 \ + + DUMMY_ARG \ + + 4 /* pad to doubleword */ ) + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME push_dummy_frame() +extern void push_dummy_frame (); + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +#define POP_FRAME pop_frame() +extern void pop_frame (); + +/* This sequence of words is the instructions + mtsrim cr, 15 + loadm 0, 0, lr2, msp ; load first 16 words of arguments into registers + add msp, msp, 16 * 4 ; point to the remaining arguments + CONST_INSN: + const lr0,inf ; (replaced by half of target addr) + consth lr0,inf ; (replaced by other half of target addr) + calli lr0, lr0 + aseq 0x40,gr1,gr1 ; nop + BREAKPT_INSN: + asneq 0x50,gr1,gr1 ; breakpoint (replaced by local breakpoint insn) + */ + +#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER +#define BS(const) const +#else +#define BS(const) (((const) & 0xff) << 24) | \ + (((const) & 0xff00) << 8) | \ + (((const) & 0xff0000) >> 8) | \ + (((const) & 0xff000000) >> 24) +#endif + +/* Position of the "const" and blkt instructions within CALL_DUMMY in bytes. */ +#define CONST_INSN (3 * 4) +#define BREAKPT_INSN (7 * 4) +#define CALL_DUMMY { \ + BS(0x0400870f),\ + BS(0x36008200|(MSP_HW_REGNUM)), \ + BS(0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16)), \ + BS(0x03ff80ff), \ + BS(0x02ff80ff), \ + BS(0xc8008080), \ + BS(0x70400101), \ + BS(0x72500101)} +#define CALL_DUMMY_LENGTH (8 * 4) + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +/* Helper macro for FIX_CALL_DUMMY. WORDP is a long * which points to a + word in target byte order; bits 0-7 and 16-23 of *WORDP are replaced with + bits 0-7 and 8-15 of DATA (which is in host byte order). */ + +#if TARGET_BYTE_ORDER == BIG_ENDIAN +#define STUFF_I16(WORDP, DATA) \ + { \ + *((char *)(WORDP) + 3) = ((DATA) & 0xff);\ + *((char *)(WORDP) + 1) = (((DATA) >> 8) & 0xff);\ + } +#else /* Target is little endian. */ +#define STUFF_I16(WORDP, DATA) \ + { + *(char *)(WORDP) = ((DATA) & 0xff); + *((char *)(WORDP) + 2) = (((DATA) >> 8) & 0xff); + } +#endif /* Target is little endian. */ + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +/* Currently this stuffs in the address of the function that we are calling. + Since different a29k systems use different breakpoint instructions, it + also stuffs BREAKPOINT in the right place (to avoid having to + duplicate CALL_DUMMY in each tm-*.h file). */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + {\ + STUFF_I16((char *)dummyname + CONST_INSN, fun); \ + STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16); \ + /* FIXME memcpy ((char *)(dummyname) + BREAKPT_INSN, break_insn, 4); */ \ + } + +/* a29k architecture has separate data & instruction memories -- wired to + different pins on the chip -- and can't execute the data memory. + Also, there should be space after text_end; + we won't get a SIGSEGV or scribble on data space. */ + +#define CALL_DUMMY_LOCATION AFTER_TEXT_END + +/* Because of this, we need (as a kludge) to know the addresses of the + text section. */ + +#define NEED_TEXT_START_END 1 + +/* How to translate register numbers in the .stab's into gdb's internal register + numbers. We don't translate them, but we warn if an invalid register + number is seen. Note that FIXME, we use the value "sym" as an implicit + argument in printing the error message. It happens to be available where + this macro is used. (This macro definition appeared in a late revision + of gdb-3.91.6 and is not well tested. Also, it should be a "complaint".) */ + +#define STAB_REG_TO_REGNUM(num) \ + (((num) > LR0_REGNUM + 127) \ + ? fprintf(stderr, \ + "Invalid register number %d in symbol table entry for %s\n", \ + (num), SYMBOL_SOURCE_NAME (sym)), (num) \ + : (num)) + +extern enum a29k_processor_types { + a29k_unknown, + + /* Bit 0x400 of the CPS does *not* identify freeze mode, i.e. 29000, + 29030, etc. */ + a29k_no_freeze_mode, + + /* Bit 0x400 of the CPS does identify freeze mode, i.e. 29050. */ + a29k_freeze_mode +} processor_type; + +/* We need three arguments for a general frame specification for the + "frame" or "info frame" command. */ + +#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) +extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *)); diff --git a/gdb/config/a29k/tm-ultra3.h b/gdb/config/a29k/tm-ultra3.h new file mode 100644 index 0000000..8b96210 --- /dev/null +++ b/gdb/config/a29k/tm-ultra3.h @@ -0,0 +1,226 @@ +/* Parameters for NYU Ultracomputer 29000 target, for GDB, the GNU debugger. + Copyright 1990, 1991 Free Software Foundation, Inc. + Contributed by David Wood @ New York University (wood@nyu.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This file includes tm-a29k.h, but predefines REGISTER_NAMES and + related macros. The file supports a a29k running our flavor of + Unix on our Ultra3 PE Boards. */ + +/* Byte order is configurable, but this machine runs big-endian. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. + */ +#define NUM_REGS (EXO_REGNUM + 1) + +#define REGISTER_NAMES { \ + "gr1", \ + "gr64", "gr65", "gr66", "gr67", "gr68", "gr69", "gr70", "gr71", "gr72", \ + "gr73", "gr74", "gr75", "gr76", "gr77", "gr78", "gr79", "gr80", "gr81", \ + "gr82", "gr83", "gr84", "gr85", "gr86", "gr87", "gr88", "gr89", "gr90", \ + "gr91", "gr92", "gr93", "gr94", "gr95", \ + "gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \ + "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \ + "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \ + "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127", \ + "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9", \ + "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \ + "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \ + "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \ + "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \ + "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \ + "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \ + "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \ + "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \ + "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \ + "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \ + "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \ + "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \ + "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \ + "lr124", "lr125", "lr126", "lr127", \ + "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr", \ + "pc0", "pc1", "pc2", "mmu", "lru", \ + "ipc", "ipa", "ipb", "q", "alu", "bp", "fc", "cr", \ + "fpe", "int", "fps", "exo" } + + +#ifdef KERNEL_DEBUGGING +# define PADDR_U_REGNUM 22 /* gr86 */ +# define RETURN_REGNUM GR64_REGNUM +#else +# define RETURN_REGNUM GR96_REGNUM +#endif /* KERNEL_DEBUGGING */ + + +/* Should rename all GR96_REGNUM to RETURN_REGNUM */ +#define GR1_REGNUM (0) +#define GR64_REGNUM 1 +#define GR96_REGNUM (GR64_REGNUM + 32) +/* This needs to be the memory stack pointer, not the register stack pointer, + to make call_function work right. */ +#define SP_REGNUM MSP_REGNUM + +#define FP_REGNUM (LR0_REGNUM + 1) /* lr1 */ +/* Large Return Pointer */ +#define LRP_REGNUM (123 - 96 + RETURN_REGNUM) +/* Static link pointer */ +#define SLP_REGNUM (124 - 96 + RETURN_REGNUM) +/* Memory Stack Pointer. */ +#define MSP_REGNUM (125 - 96 + RETURN_REGNUM) +/* Register allocate bound. */ +#define RAB_REGNUM (126 - 96 + RETURN_REGNUM) +/* Register Free Bound. */ +#define RFB_REGNUM (127 - 96 + RETURN_REGNUM) +/* Register Stack Pointer. */ +#define RSP_REGNUM GR1_REGNUM +#define LR0_REGNUM ( 32 + GR96_REGNUM) + +/* Protected Special registers */ +#define VAB_REGNUM (LR0_REGNUM + 128) +#define OPS_REGNUM (VAB_REGNUM + 1) +#define CPS_REGNUM (VAB_REGNUM + 2) +#define CFG_REGNUM (VAB_REGNUM + 3) +#define CHA_REGNUM (VAB_REGNUM + 4) +#define CHD_REGNUM (VAB_REGNUM + 5) +#define CHC_REGNUM (VAB_REGNUM + 6) +#define RBP_REGNUM (VAB_REGNUM + 7) +#define TMC_REGNUM (VAB_REGNUM + 8) +#define TMR_REGNUM (VAB_REGNUM + 9) +#define NPC_REGNUM (VAB_REGNUM + 10) /* pc0 */ +#define PC_REGNUM (VAB_REGNUM + 11) /* pc1 */ +#define PC2_REGNUM (VAB_REGNUM + 12) /* pc2 */ +#define MMU_REGNUM (VAB_REGNUM + 13) +#define LRU_REGNUM (VAB_REGNUM + 14) + /* Register sequence gap */ +/* Unprotected Special registers */ +#define IPC_REGNUM (LRU_REGNUM + 1) +#define IPA_REGNUM (IPC_REGNUM + 1) +#define IPB_REGNUM (IPC_REGNUM + 2) +#define Q_REGNUM (IPC_REGNUM + 3) +#define ALU_REGNUM (IPC_REGNUM + 4) +#define PS_REGNUM ALU_REGNUM +#define BP_REGNUM (IPC_REGNUM + 5) +#define FC_REGNUM (IPC_REGNUM + 6) +#define CR_REGNUM (IPC_REGNUM + 7) + /* Register sequence gap */ +#define FPE_REGNUM (CR_REGNUM + 1) +#define INT_REGNUM (FPE_REGNUM + 1) +#define FPS_REGNUM (FPE_REGNUM + 2) + /* Register sequence gap */ +#define EXO_REGNUM (FPS_REGNUM + 1) + +/* Special register #x. */ +#define SR_REGNUM(x) \ + ((x) < 15 ? VAB_REGNUM + (x) \ + : (x) >= 128 && (x) < 136 ? IPC_REGNUM + (x-128) \ + : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x-160) \ + : (x) == 164 ? EXO_REGNUM \ + : (error ("Internal error in SR_REGNUM"), 0)) + +#ifndef KERNEL_DEBUGGING +/* + * This macro defines the register numbers (from REGISTER_NAMES) that + * are effectively unavailable to the user through ptrace(). It allows + * us to include the whole register set in REGISTER_NAMES (inorder to + * better support remote debugging). If it is used in + * fetch/store_inferior_registers() gdb will not complain about I/O errors + * on fetching these registers. If all registers in REGISTER_NAMES + * are available, then return false (0). + */ +#define CANNOT_STORE_REGISTER(regno) \ + (((regno)>=GR64_REGNUM && (regno)<GR64_REGNUM+32) || \ + ((regno)==VAB_REGNUM) || \ + ((regno)==OPS_REGNUM) || \ + ((regno)>=CFG_REGNUM && (regno)<=TMR_REGNUM) || \ + ((regno)==MMU_REGNUM) || \ + ((regno)==LRU_REGNUM) || \ + ((regno)>=ALU_REGNUM) || \ + ((regno)==CR_REGNUM) || \ + ((regno)==EXO_REGNUM)) +#define CANNOT_FETCH_REGISTER(regno) CANNOT_STORE_REGISTER(regno) +#endif /* KERNEL_DEBUGGING */ + +/* + * Converts an sdb register number to an internal gdb register number. + * Currently under gcc, gr96->0...gr128->31...lr0->32...lr127->159, or... + * gr64->0...gr95->31, lr0->32...lr127->159. + */ +#define SDB_REG_TO_REGNUM(value) (((value)<32) ? ((value)+RETURN_REGNUM) : \ + ((value)-32+LR0_REGNUM)) + +#ifdef KERNEL_DEBUGGING + /* ublock virtual address as defined in our sys/param.h */ + /* FIXME: Should get this from sys/param.h */ +# define UVADDR ((32*0x100000)-8192) +#endif + +/* + * Are we in sigtramp(), needed in infrun.c. Specific to ultra3, because + * we take off the leading '_'. + */ +#if !defined(KERNEL_DEBUGGING) +#ifdef SYM1 +# define IN_SIGTRAMP(pc, name) (name && STREQ ("sigtramp", name)) +#else + Need to define IN_SIGTRAMP() for sym2. +#endif +#endif /* !KERNEL_DEBUGGING */ + +#include "a29k/tm-a29k.h" + +/**** The following are definitions that override those in tm-a29k.h ****/ + +/* This sequence of words is the instructions + mtsrim cr, 15 + loadm 0, 0, lr2, msp ; load first 16 words of arguments into registers + add msp, msp, 16 * 4 ; point to the remaining arguments + CONST_INSN: + const gr96,inf + consth gr96,inf + calli lr0, gr96 + aseq 0x40,gr1,gr1 ; nop + asneq 0x50,gr1,gr1 ; breakpoint + When KERNEL_DEBUGGIN is defined, msp -> gr93, gr96 -> gr64, + 7d -> 5d, 60 -> 40 + */ + +/* Position of the "const" instruction within CALL_DUMMY in bytes. */ +#undef CALL_DUMMY +#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER +#ifdef KERNEL_DEBUGGING /* gr96 -> gr64 */ +# define CALL_DUMMY {0x0400870f, 0x3600825d, 0x155d5d40, 0x03ff40ff, \ + 0x02ff40ff, 0xc8008040, 0x70400101, 0x72500101} +#else +# define CALL_DUMMY {0x0400870f, 0x3600827d, 0x157d7d40, 0x03ff60ff, \ + 0x02ff60ff, 0xc8008060, 0x70400101, 0x72500101} +#endif /* KERNEL_DEBUGGING */ +#else /* Byte order differs. */ + you lose +#endif /* Byte order differs. */ + +#if !defined(KERNEL_DEBUGGING) +# ifdef SYM1 +# undef DECR_PC_AFTER_BREAK +# define DECR_PC_AFTER_BREAK 0 /* Sym1 kernel does the decrement */ +# else + ->"ULTRA3 running other than sym1 OS"!; +# endif +#endif /* !KERNEL_DEBUGGING */ + diff --git a/gdb/config/a29k/tm-vx29k.h b/gdb/config/a29k/tm-vx29k.h new file mode 100644 index 0000000..487df82 --- /dev/null +++ b/gdb/config/a29k/tm-vx29k.h @@ -0,0 +1,229 @@ +/* Target machine description for VxWorks on the 29k, for GDB, the GNU debugger. + Copyright 1994 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "a29k/tm-a29k.h" + +#define GDBINIT_FILENAME ".vxgdbinit" + +#define DEFAULT_PROMPT "(vxgdb) " + +/* Number of registers in a ptrace_getregs call. */ + +#define VX_NUM_REGS (NUM_REGS) + +/* Number of registers in a ptrace_getfpregs call. */ + +/* #define VX_SIZE_FPREGS */ + +/* This is almost certainly the wrong place for this: */ +#define LR2_REGNUM 34 + + +/* Vxworks has its own CALL_DUMMY since it manages breakpoints in the kernel */ + +#undef CALL_DUMMY + +/* Replace the breakpoint instruction in the CALL_DUMMY with a nop. + For Vxworks, the breakpoint is set and deleted by calls to + CALL_DUMMY_BREAK_SET and CALL_DUMMY_BREAK_DELETE. */ + +#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER +#define CALL_DUMMY {0x0400870f,\ + 0x36008200|(MSP_HW_REGNUM), \ + 0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \ + 0x03ff80ff, 0x02ff80ff, 0xc8008080, 0x70400101, 0x70400101} +#else /* Byte order differs. */ +#define CALL_DUMMY {0x0f870004,\ + 0x00820036|(MSP_HW_REGNUM << 24), \ + 0x40000015|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \ + 0xff80ff03, 0xff80ff02, 0x808000c8, 0x01014070, 0x01014070} +#endif /* Byte order differs. */ + + +/* For the basic CALL_DUMMY definitions, see "tm-29k.h." We use the + same CALL_DUMMY code, but define FIX_CALL_DUMMY (and related macros) + locally to handle remote debugging of VxWorks targets. The difference + is in the setting and clearing of the breakpoint at the end of the + CALL_DUMMY code fragment; under VxWorks, we can't simply insert a + breakpoint instruction into the code, since that would interfere with + the breakpoint management mechanism on the target. + Note that CALL_DUMMY is a piece of code that is used to call any C function + thru VxGDB */ + +/* The offset of the instruction within the CALL_DUMMY code where we + want the inferior to stop after the function call has completed. + call_function_by_hand () sets a breakpoint here (via CALL_DUMMY_BREAK_SET), + which POP_FRAME later deletes (via CALL_DUMMY_BREAK_DELETE). */ + +#define CALL_DUMMY_STOP_OFFSET (7 * 4) + +/* The offset of the first instruction of the CALL_DUMMY code fragment + relative to the frame pointer for a dummy frame. This is equal to + the size of the CALL_DUMMY plus the arg_slop area size (see the diagram + in "tm-29k.h"). */ +/* PAD : the arg_slop area size doesn't appear to me to be useful since, the + call dummy code no longer modify the msp. See below. This must be checked. */ + +#define CALL_DUMMY_OFFSET_IN_FRAME (CALL_DUMMY_LENGTH + 16 * 4) + +/* Insert the specified number of args and function address + into a CALL_DUMMY sequence stored at DUMMYNAME, replace the third + instruction (add msp, msp, 16*4) with a nop, and leave the final nop. + We can't keep using a CALL_DUMMY that modify the msp since, for VxWorks, + CALL_DUMMY is stored in the Memory Stack. Adding 16 words to the msp + would then make possible for the inferior to overwrite the CALL_DUMMY code, + thus creating a lot of trouble when exiting the inferior to come back in + a CALL_DUMMY code that no longer exists... Furthermore, ESF are also stored + from the msp in the memory stack. If msp is set higher than the dummy code, + an ESF may clobber this code. */ + +#if TARGET_BYTE_ORDER == BIG_ENDIAN +#define NOP_INSTR 0x70400101 +#else /* Target is little endian */ +#define NOP_INSTR 0x01014070 +#endif + +#undef FIX_CALL_DUMMY +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + { \ + *(int *)((char *)dummyname + 8) = NOP_INSTR; \ + STUFF_I16((char *)dummyname + CONST_INSN, fun); \ + STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16); \ + } + +/* For VxWorks, CALL_DUMMY must be stored in the stack of the task that is + being debugged and executed "in the context of" this task */ + +#undef CALL_DUMMY_LOCATION +#define CALL_DUMMY_LOCATION ON_STACK + +/* Set or delete a breakpoint at the location within a CALL_DUMMY code + fragment where we want the target program to stop after the function + call is complete. CALL_DUMMY_ADDR is the address of the first + instruction in the CALL_DUMMY. DUMMY_FRAME_ADDR is the value of the + frame pointer in the dummy frame. + + NOTE: in the both of the following definitions, we take advantage of + knowledge of the implementation of the target breakpoint operation, + in that we pass a null pointer as the second argument. It seems + reasonable to assume that any target requiring the use of + CALL_DUMMY_BREAK_{SET,DELETE} will not store the breakpoint + shadow contents in GDB; in any case, this assumption is vaild + for all VxWorks-related targets. */ + +#define CALL_DUMMY_BREAK_SET(call_dummy_addr) \ + target_insert_breakpoint ((call_dummy_addr) + CALL_DUMMY_STOP_OFFSET, \ + (char *) 0) + +#define CALL_DUMMY_BREAK_DELETE(dummy_frame_addr) \ + target_remove_breakpoint ((dummy_frame_addr) - (CALL_DUMMY_OFFSET_IN_FRAME \ + - CALL_DUMMY_STOP_OFFSET), \ + (char *) 0) + +/* Return nonzero if the pc is executing within a CALL_DUMMY frame. */ + +#define PC_IN_CALL_DUMMY(pc, sp, frame_address) \ + ((pc) >= (sp) \ + && (pc) <= (sp) + CALL_DUMMY_OFFSET_IN_FRAME + CALL_DUMMY_LENGTH) + +/* Defining this prevents us from trying to pass a structure-valued argument + to a function called via the CALL_DUMMY mechanism. This is not handled + properly in call_function_by_hand (), and the fix might require re-writing + the CALL_DUMMY handling for all targets (at least, a clean solution + would probably require this). Arguably, this should go in "tm-29k.h" + rather than here. */ + +#define STRUCT_VAL_ARGS_UNSUPPORTED + +#define BKPT_OFFSET (7 * 4) +#define BKPT_INSTR 0x72500101 + +#undef FIX_CALL_DUMMY +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + {\ + STUFF_I16((char *)dummyname + CONST_INSN, fun);\ + STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);\ + *(int *)((char *)dummyname + BKPT_OFFSET) = BKPT_INSTR;\ + } + + +/* Offsets into jmp_buf. They are derived from VxWorks' REG_SET struct + (see VxWorks' setjmp.h). Note that Sun2, Sun3 and SunOS4 and VxWorks have + different REG_SET structs, hence different layouts for the jmp_buf struct. + Only JB_PC is needed for getting the saved PC value. */ + +#define JB_ELEMENT_SIZE 4 /* size of each element in jmp_buf */ +#define JB_PC 3 /* offset of pc (pc1) in jmp_buf */ + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. lr2 (LR2_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* VxWorks adjusts the PC after a breakpoint has been hit. */ + +#undef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 0 + +/* Do whatever promotions are appropriate on a value being returned + from a function. VAL is the user-supplied value, and FUNC_TYPE + is the return type of the function if known, else 0. + + For the Am29k, as far as I understand, if the function return type is known, + cast the value to that type; otherwise, ensure that integer return values + fill all of gr96. + + This definition really belongs in "tm-29k.h", since it applies + to most Am29K-based systems; but once moved into that file, it might + need to be redefined for all Am29K-based targets that also redefine + STORE_RETURN_VALUE. For now, to be safe, we define it here. */ + +#define PROMOTE_RETURN_VALUE(val, func_type) \ + do { \ + if (func_type) \ + val = value_cast (func_type, val); \ + if ((TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT \ + || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_ENUM) \ + && TYPE_LENGTH (VALUE_TYPE (val)) < REGISTER_RAW_SIZE (0)) \ + val = value_cast (builtin_type_int, val); \ + } while (0) + +extern int vx29k_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) vx29k_frame_chain_valid (chain, thisframe) + +extern CORE_ADDR frame_saved_call_site (); + +#undef PREPARE_TO_INIT_FRAME_INFO +#define PREPARE_TO_INIT_FRAME_INFO(fci) do { \ + long current_msp = read_register (MSP_REGNUM); \ + if (PC_IN_CALL_DUMMY (fci->pc, current_msp, 0)) \ + { \ + fci->rsize = DUMMY_FRAME_RSIZE; \ + fci->msize = 0; \ + fci->saved_msp = \ + read_register_stack_integer (fci->frame + DUMMY_FRAME_RSIZE - 4, 4); \ + fci->flags |= (TRANSPARENT|MFP_USED); \ + return; \ + } \ + } while (0) diff --git a/gdb/config/a29k/ultra3.mh b/gdb/config/a29k/ultra3.mh new file mode 100644 index 0000000..2f211c5 --- /dev/null +++ b/gdb/config/a29k/ultra3.mh @@ -0,0 +1,13 @@ +# Host: NYU Ultracomputer (AMD 29000 running Unix) + +CC=u3cc + +XM_FILE= xm-ultra3.h +XDEPFILES= ultra3-xdep.o + +MH_CFLAGS = -DSYM1 +XM_CLIBS = -lsysv -ljobs -ltermlib + +NAT_FILE= nm-ultra3.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o ultra3-nat.o + diff --git a/gdb/config/a29k/ultra3.mt b/gdb/config/a29k/ultra3.mt new file mode 100644 index 0000000..1f5fd2f --- /dev/null +++ b/gdb/config/a29k/ultra3.mt @@ -0,0 +1,6 @@ +# Target: AMD 29000 running Unix on New York University processor board +TDEPFILES= a29k-tdep.o +TM_FILE= tm-ultra3.h + +# SYM1 is some OS they have. +MT_CFLAGS = -DSYM1 diff --git a/gdb/config/a29k/vx29k.mt b/gdb/config/a29k/vx29k.mt new file mode 100644 index 0000000..4d6f5cc --- /dev/null +++ b/gdb/config/a29k/vx29k.mt @@ -0,0 +1,4 @@ +# Target: AMD 29k running VxWorks +TDEPFILES= a29k-tdep.o remote-vx.o remote-vx29k.o xdr_ld.o xdr_ptrace.o xdr_rdb.o +TM_FILE= tm-vx29k.h +MT_CFLAGS = -DNO_HIF_SUPPORT diff --git a/gdb/config/a29k/xm-ultra3.h b/gdb/config/a29k/xm-ultra3.h new file mode 100644 index 0000000..ec0b108 --- /dev/null +++ b/gdb/config/a29k/xm-ultra3.h @@ -0,0 +1,52 @@ +/* Host definitions for GDB running on an a29k NYU Ultracomputer + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + Contributed by David Wood (wood@lab.ultra.nyu.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Here at NYU we have what we call an ULTRA3 PE board. So + ifdefs for ULTRA3 are my doing. At this point in time, + I don't know of any other Unixi running on the a29k. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#define HAVE_WAIT_STRUCT + +#ifndef L_SET +# define L_SET 0 /* set the seek pointer */ +# define L_INCR 1 /* increment the seek pointer */ +# define L_XTND 2 /* extend the file size */ +#endif + +#ifndef O_RDONLY +# define O_RDONLY 0 +# define O_WRONLY 1 +# define O_RDWR 2 +#endif + +#ifndef F_OK +# define R_OK 4 +# define W_OK 2 +# define X_OK 1 +# define F_OK 0 +#endif + +/* System doesn't provide siginterrupt(). */ +#define NO_SIGINTERRUPT + +/* System uses a `short' to hold a process group ID. */ +#define SHORT_PGRP diff --git a/gdb/config/alpha/alpha-linux.mh b/gdb/config/alpha/alpha-linux.mh new file mode 100644 index 0000000..aa4a069 --- /dev/null +++ b/gdb/config/alpha/alpha-linux.mh @@ -0,0 +1,9 @@ +# Host: Little-endian Alpha running Linux +XDEPFILES= ser-tcp.o +XM_FILE= xm-alphalinux.h +NAT_FILE= nm-linux.h +NATDEPFILES= infptrace.o inftarg.o corelow.o core-regset.o alpha-nat.o \ + fork-child.o solib.o + +MMALLOC = +MMALLOC_CFLAGS = -DNO_MMALLOC diff --git a/gdb/config/alpha/alpha-linux.mt b/gdb/config/alpha/alpha-linux.mt new file mode 100644 index 0000000..7789252 --- /dev/null +++ b/gdb/config/alpha/alpha-linux.mt @@ -0,0 +1,3 @@ +# Target: Little-endian Alpha +TDEPFILES= alpha-tdep.o +TM_FILE= tm-alphalinux.h diff --git a/gdb/config/alpha/alpha-osf1.mh b/gdb/config/alpha/alpha-osf1.mh new file mode 100644 index 0000000..6ed0f95 --- /dev/null +++ b/gdb/config/alpha/alpha-osf1.mh @@ -0,0 +1,5 @@ +# Host: Little-endian Alpha running OSF/1-1.x +XDEPFILES= +XM_FILE= xm-alphaosf.h +NAT_FILE= nm-osf.h +NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o diff --git a/gdb/config/alpha/alpha-osf1.mt b/gdb/config/alpha/alpha-osf1.mt new file mode 100644 index 0000000..98f87c1 --- /dev/null +++ b/gdb/config/alpha/alpha-osf1.mt @@ -0,0 +1,3 @@ +# Target: Little-endian Alpha +TDEPFILES= alpha-tdep.o +TM_FILE= tm-alpha.h diff --git a/gdb/config/alpha/alpha-osf2.mh b/gdb/config/alpha/alpha-osf2.mh new file mode 100644 index 0000000..569b6fd --- /dev/null +++ b/gdb/config/alpha/alpha-osf2.mh @@ -0,0 +1,5 @@ +# Host: Little-endian Alpha running OSF/1-2.x using procfs +XDEPFILES= +XM_FILE= xm-alphaosf.h +NAT_FILE= nm-osf2.h +NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o procfs.o diff --git a/gdb/config/alpha/alpha-osf3.mh b/gdb/config/alpha/alpha-osf3.mh new file mode 100644 index 0000000..4997531 --- /dev/null +++ b/gdb/config/alpha/alpha-osf3.mh @@ -0,0 +1,5 @@ +# Host: Little-endian Alpha running OSF/1-3.x and higher using procfs +XDEPFILES= +XM_FILE= xm-alphaosf.h +NAT_FILE= nm-osf3.h +NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o procfs.o diff --git a/gdb/config/alpha/nm-linux.h b/gdb/config/alpha/nm-linux.h new file mode 100644 index 0000000..eedb1a9 --- /dev/null +++ b/gdb/config/alpha/nm-linux.h @@ -0,0 +1,66 @@ +/* Native definitions for alpha running Linux. + Copyright (C) 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + argument regs. A0_REGNUM points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* Tell gdb that we can attach and detach other processes */ +#define ATTACH_DETACH + +/* ptrace register ``addresses'' are absolute. */ + +#define U_REGS_OFFSET 0 + +#define PTRACE_ARG3_TYPE long + +/* ptrace transfers longs, the ptrace man page is lying. */ + +#define PTRACE_XFER_TYPE long + +/* The alpha does not step over a breakpoint, the manpage is lying again. */ + +#define CANNOT_STEP_BREAKPOINT + +/* Linux has shared libraries. */ + +#define GDB_TARGET_HAS_SHARED_LIBS + +/* Support for shared libraries. */ + +#include "solib.h" + +#ifdef __ELF__ +#define SVR4_SHARED_LIBS +#define TARGET_ELF64 +#endif + +/* This is a lie. It's actually in stdio.h. */ + +#define PSIGNAL_IN_SIGNAL_H + +/* Given a pointer to either a gregset_t or fpregset_t, return a + pointer to the first register. */ +#define ALPHA_REGSET_BASE(regsetp) ((long *) (regsetp)) diff --git a/gdb/config/alpha/nm-osf.h b/gdb/config/alpha/nm-osf.h new file mode 100644 index 0000000..e06140d --- /dev/null +++ b/gdb/config/alpha/nm-osf.h @@ -0,0 +1,56 @@ +/* Native definitions for alpha running OSF/1. + Copyright (C) 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + argument regs. A0_REGNUM points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* ptrace register ``addresses'' are absolute. */ + +#define U_REGS_OFFSET 0 + +/* FIXME: Shouldn't the default definition in inferior.h be int* ? */ + +#define PTRACE_ARG3_TYPE int* + +/* ptrace transfers longs, the ptrace man page is lying. */ + +#define PTRACE_XFER_TYPE long + +/* The alpha does not step over a breakpoint, the manpage is lying again. */ + +#define CANNOT_STEP_BREAKPOINT + +/* OSF/1 has shared libraries. */ + +#define GDB_TARGET_HAS_SHARED_LIBS + +/* Support for shared libraries. */ + +#include "solib.h" + +/* Given a pointer to either a gregset_t or fpregset_t, return a + pointer to the first register. */ +#define ALPHA_REGSET_BASE(regsetp) ((regsetp)->regs) diff --git a/gdb/config/alpha/nm-osf2.h b/gdb/config/alpha/nm-osf2.h new file mode 100644 index 0000000..01725ef --- /dev/null +++ b/gdb/config/alpha/nm-osf2.h @@ -0,0 +1,54 @@ +/* Native definitions for alpha running OSF/1-2.x, using procfs. + Copyright (C) 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic OSF/1 definitions. */ +#include "alpha/nm-osf.h" + +/* OSF/1-2.x has optional /proc support, try to use it instead of ptrace. */ +#define USE_PROC_FS +#define HAVE_OPTIONAL_PROC_FS + +/* OSF/1 doesn't provide the standard fault definitions, so don't use them. */ +#define FAULTED_USE_SIGINFO + +/* Don't trace faults under OSF/1, rely on the posting of the appropriate + signal if fault tracing is disabled. + Tracing T_IFAULT under Alpha OSF/1 causes a `floating point enable' + fault from which we cannot continue (except by disabling the + tracing). + And as OSF/1 doesn't provide the standard fault definitions, the + mapping of faults to appropriate signals in procfs_wait is difficult. */ +#define PROCFS_DONT_TRACE_FAULTS + +/* Work around some peculiarities in the OSF/1 procfs implementation. */ +#define PROCFS_SIGPEND_OFFSET +#define PROCFS_NEED_PIOCSSIG_FOR_KILL +#define PROCFS_DONT_PIOCSSIG_CURSIG + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); + +/* poll() doesn't seem to work properly for /proc in this version of the OS. + If we only specify POLLPRI, things hang. It seems to get better when we set + POLLOUT, but that always returns POLLNVAL!!! Also, POLLOUT causes problems + on other OSes. */ + +#define LOSING_POLL diff --git a/gdb/config/alpha/nm-osf3.h b/gdb/config/alpha/nm-osf3.h new file mode 100644 index 0000000..a1871a6 --- /dev/null +++ b/gdb/config/alpha/nm-osf3.h @@ -0,0 +1,26 @@ +/* Native definitions for alpha running OSF/1-3.x and higher, using procfs. + Copyright (C) 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* OSF/1-3.x fixes some OSF/1-2.x procfs peculiarities and adds + a new one. */ +#include "alpha/nm-osf2.h" + +#undef PROCFS_NEED_PIOCSSIG_FOR_KILL +#undef PROCFS_DONT_PIOCSSIG_CURSIG +#define PROCFS_NEED_CLEAR_CURSIG_FOR_KILL diff --git a/gdb/config/alpha/tm-alpha.h b/gdb/config/alpha/tm-alpha.h new file mode 100644 index 0000000..d9b9812 --- /dev/null +++ b/gdb/config/alpha/tm-alpha.h @@ -0,0 +1,479 @@ +/* Definitions to make GDB run on an Alpha box under OSF1. This is + also used by the Alpha/Netware and Alpha/Linux targets. + Copyright 1993, 1994, 1995, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_ALPHA_H +#define TM_ALPHA_H + +#include "bfd.h" +#include "coff/sym.h" /* Needed for PDR below. */ +#include "coff/symconst.h" + +#ifdef __STDC__ +struct frame_info; +struct type; +struct value; +struct symbol; +#endif + +#if !defined (TARGET_BYTE_ORDER) +#define TARGET_BYTE_ORDER LITTLE_ENDIAN +#endif + +/* Redefine some target bit sizes from the default. */ + +#define TARGET_LONG_BIT 64 +#define TARGET_LONG_LONG_BIT 64 +#define TARGET_PTR_BIT 64 + +/* Floating point is IEEE compliant */ +#define IEEE_FLOAT + +/* Number of traps that happen between exec'ing the shell + * to run an inferior, and when we finally get to + * the inferior code. This is 2 on most implementations. + */ +#define START_INFERIOR_TRAPS_EXPECTED 3 + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) pc = alpha_skip_prologue(pc, 0) +extern CORE_ADDR alpha_skip_prologue PARAMS ((CORE_ADDR addr, int lenient)); + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) alpha_saved_pc_after_call(frame) +extern CORE_ADDR +alpha_saved_pc_after_call PARAMS ((struct frame_info *)); + +/* Are we currently handling a signal ? */ + +#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("__sigtramp", (name))) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define BREAKPOINT {0x80, 0, 0, 0} /* call_pal bpt */ + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#ifndef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 4 +#endif + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 8 + +/* Number of machine registers */ + +#define NUM_REGS 66 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES \ + { "v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6", \ + "t7", "s0", "s1", "s2", "s3", "s4", "s5", "fp", \ + "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9", \ + "t10", "t11", "ra", "t12", "at", "gp", "sp", "zero", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\ + "pc", "vfp", \ + } + +/* Register numbers of various important registers. + Note that most of these values are "real" register numbers, + and correspond to the general registers of the machine, + and FP_REGNUM is a "phony" register number which is too large + to be an actual register number as far as the user is concerned + but serves to get the desired value when passed to read_register. */ + +#define V0_REGNUM 0 /* Function integer return value */ +#define T7_REGNUM 8 /* Return address register for OSF/1 __add* */ +#define GCC_FP_REGNUM 15 /* Used by gcc as frame register */ +#define A0_REGNUM 16 /* Loc of first arg during a subr call */ +#define T9_REGNUM 23 /* Return address register for OSF/1 __div* */ +#define T12_REGNUM 27 /* Contains start addr of current proc */ +#define SP_REGNUM 30 /* Contains address of top of stack */ +#define RA_REGNUM 26 /* Contains return address value */ +#define ZERO_REGNUM 31 /* Read-only register, always 0 */ +#define FP0_REGNUM 32 /* Floating point register 0 */ +#define FPA0_REGNUM 48 /* First float arg during a subr call */ +#define PC_REGNUM 64 /* Contains program counter */ +#define FP_REGNUM 65 /* Virtual frame pointer */ + +#define CANNOT_FETCH_REGISTER(regno) \ + ((regno) == FP_REGNUM || (regno) == ZERO_REGNUM) +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == FP_REGNUM || (regno) == ZERO_REGNUM) + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 8) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 8) + +/* Number of bytes of storage in the actual machine representation + for register N. On Alphas, all regs are 8 bytes. */ + +#define REGISTER_RAW_SIZE(N) 8 + +/* Number of bytes of storage in the program's representation + for register N. On Alphas, all regs are 8 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) 8 + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion + from raw format to virtual format. + The alpha needs a conversion between register and memory format if + the register is a floating point register and + memory format is float, as the register format must be double + or + memory format is an integer with 4 bytes or less, as the representation + of integers in floating point registers is different. */ + +#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM && (N) < FP0_REGNUM + 32) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM, TYPE, FROM, TO) \ + alpha_register_convert_to_virtual (REGNUM, TYPE, FROM, TO) +extern void +alpha_register_convert_to_virtual PARAMS ((int, struct type *, char *, char *)); + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE, REGNUM, FROM, TO) \ + alpha_register_convert_to_raw (TYPE, REGNUM, FROM, TO) +extern void +alpha_register_convert_to_raw PARAMS ((struct type *, int, char *, char *)); + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) \ + ? builtin_type_double : builtin_type_long) \ + +/* Store the address of the place in which to copy the structure the + subroutine will return. Handled by alpha_push_arguments. */ + +#define STORE_STRUCT_RETURN(addr, sp) /**/ + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + alpha_extract_return_value(TYPE, REGBUF, VALBUF) +extern void +alpha_extract_return_value PARAMS ((struct type *, char *, char *)); + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + alpha_store_return_value(TYPE, VALBUF) +extern void +alpha_store_return_value PARAMS ((struct type *, char *)); + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +/* The address is passed in a0 upon entry to the function, but when + the function exits, the compiler has copied the value to v0. This + convention is specified by the System V ABI, so I think we can rely + on it. */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \ + REGISTER_RAW_SIZE (V0_REGNUM))) + +/* Structures are returned by ref in extra arg0 */ +#define USE_STRUCT_CONVENTION(gcc_p, type) 1 + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +#define FRAME_CHAIN(thisframe) (CORE_ADDR) alpha_frame_chain (thisframe) +extern CORE_ADDR alpha_frame_chain PARAMS ((struct frame_info *)); + +/* Define other aspects of the stack frame. */ + + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +/* We handle this differently for alpha, and maybe we should not */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) {(FRAMELESS) = 0;} + +/* Saved Pc. */ + +#define FRAME_SAVED_PC(FRAME) (alpha_frame_saved_pc(FRAME)) +extern CORE_ADDR +alpha_frame_saved_pc PARAMS ((struct frame_info *)); + +/* The alpha has two different virtual pointers for arguments and locals. + + The virtual argument pointer is pointing to the bottom of the argument + transfer area, which is located immediately below the virtual frame + pointer. Its size is fixed for the native compiler, it is either zero + (for the no arguments case) or large enough to hold all argument registers. + gcc uses a variable sized argument transfer area. As it has + to stay compatible with the native debugging tools it has to use the same + virtual argument pointer and adjust the argument offsets accordingly. + + The virtual local pointer is localoff bytes below the virtual frame + pointer, the value of localoff is obtained from the PDR. */ + +#define ALPHA_NUM_ARG_REGS 6 + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame - (ALPHA_NUM_ARG_REGS * 8)) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame - (fi)->localoff) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(num, fi) ((num) = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +extern void alpha_find_saved_regs PARAMS ((struct frame_info *)); + +#define FRAME_INIT_SAVED_REGS(frame_info) \ + do { \ + if ((frame_info)->saved_regs == NULL) \ + alpha_find_saved_regs (frame_info); \ + (frame_info)->saved_regs[SP_REGNUM] = (frame_info)->frame; \ + } while (0) + + +/* Things needed for making the inferior call functions. */ + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = alpha_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR +alpha_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME alpha_push_dummy_frame() +extern void +alpha_push_dummy_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME alpha_pop_frame() +extern void +alpha_pop_frame PARAMS ((void)); + +/* Alpha OSF/1 inhibits execution of code on the stack. + But there is no need for a dummy on the alpha. PUSH_ARGUMENTS + takes care of all argument handling and bp_call_dummy takes care + of stopping the dummy. */ + +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT + +/* On the Alpha the call dummy code is never copied to user space, + stopping the user call is achieved via a bp_call_dummy breakpoint. + But we need a fake CALL_DUMMY definition to enable the proper + call_function_by_hand and to avoid zero length array warnings + in valops.c */ + +#define CALL_DUMMY { 0 } /* Content doesn't matter. */ + +#define CALL_DUMMY_START_OFFSET (0) + +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) + +extern CORE_ADDR alpha_call_dummy_address PARAMS ((void)); +#define CALL_DUMMY_ADDRESS() alpha_call_dummy_address() + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. + We only have to set RA_REGNUM to the dummy breakpoint address + and T12_REGNUM (the `procedure value register') to the function address. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + CORE_ADDR bp_address = CALL_DUMMY_ADDRESS (); \ + if (bp_address == 0) \ + error ("no place to put call"); \ + write_register (RA_REGNUM, bp_address); \ + write_register (T12_REGNUM, fun); \ +} + +/* There's a mess in stack frame creation. See comments in blockframe.c + near reference to INIT_FRAME_PC_FIRST. */ + +#define INIT_FRAME_PC(fromleaf, prev) /* nada */ + +#define INIT_FRAME_PC_FIRST(fromleaf, prev) \ + (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \ + (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ()); + +/* Special symbol found in blocks associated with routines. We can hang + alpha_extra_func_info_t's off of this. */ + +#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__" +extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR)); + +/* Specific information about a procedure. + This overlays the ALPHA's PDR records, + alpharead.c (ab)uses this to save memory */ + +typedef struct alpha_extra_func_info { + long numargs; /* number of args to procedure (was iopt) */ + PDR pdr; /* Procedure descriptor record */ +} *alpha_extra_func_info_t; + +/* Define the extra_func_info that mipsread.c needs. + FIXME: We should define our own PDR interface, perhaps in a separate + header file. This would get rid of the <bfd.h> inclusion in all sources + and would abstract the mips/alpha interface from ecoff. */ +#define mips_extra_func_info alpha_extra_func_info +#define mips_extra_func_info_t alpha_extra_func_info_t + +#define EXTRA_FRAME_INFO \ + int localoff; \ + int pc_reg; \ + alpha_extra_func_info_t proc_desc; + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci) +extern void +init_extra_frame_info PARAMS ((struct frame_info *)); + +#define PRINT_EXTRA_FRAME_INFO(fi) \ + { \ + if (fi && fi->proc_desc && fi->proc_desc->pdr.framereg < NUM_REGS) \ + printf_filtered (" frame pointer is at %s+%d\n", \ + REGISTER_NAME (fi->proc_desc->pdr.framereg), \ + fi->proc_desc->pdr.frameoffset); \ + } + +/* It takes two values to specify a frame on the ALPHA. Sigh. + + In fact, at the moment, the *PC* is the primary value that sets up + a frame. The PC is looked up to see what function it's in; symbol + information from that function tells us which register is the frame + pointer base, and what offset from there is the "virtual frame pointer". + (This is usually an offset from SP.) FIXME -- this should be cleaned + up so that the primary value is the SP, and the PC is used to disambiguate + multiple functions with the same SP that are at different stack levels. */ + +#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) +extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *)); + +/* This is used by heuristic_proc_start. It should be shot it the head. */ +#ifndef VM_MIN_ADDRESS +#define VM_MIN_ADDRESS (CORE_ADDR)0x120000000 +#endif + +/* If PC is in a shared library trampoline code, return the PC + where the function itself actually starts. If not, return 0. */ +#define SKIP_TRAMPOLINE_CODE(pc) find_solib_trampoline_target (pc) + +/* If the current gcc for for this target does not produce correct debugging + information for float parameters, both prototyped and unprototyped, then + define this macro. This forces gdb to always assume that floats are + passed as doubles and then converted in the callee. + + For the alpha, it appears that the debug info marks the parameters as + floats regardless of whether the function is prototyped, but the actual + values are always passed in as doubles. Thus by setting this to 1, both + types of calls will work. */ + +#define COERCE_FLOAT_TO_DOUBLE 1 + +/* Return TRUE if procedure descriptor PROC is a procedure descriptor + that refers to a dynamically generated sigtramp function. + + OSF/1 doesn't use dynamic sigtramp functions, so this is always + FALSE. */ + +#define PROC_DESC_IS_DYN_SIGTRAMP(proc) (0) +#define SET_PROC_DESC_IS_DYN_SIGTRAMP(proc) + +/* If PC is inside a dynamically generated sigtramp function, return + how many bytes the program counter is beyond the start of that + function. Otherwise, return a negative value. + + OSF/1 doesn't use dynamic sigtramp functions, so this always + returns -1. */ + +#define DYNAMIC_SIGTRAMP_OFFSET(pc) (-1) + +/* Translate a signal handler frame into the address of the sigcontext + structure. */ + +#define SIGCONTEXT_ADDR(frame) \ + (read_memory_integer ((frame)->next ? frame->next->frame : frame->frame, 8)) + +/* If FRAME refers to a sigtramp frame, return the address of the next + frame. */ + +#define FRAME_PAST_SIGTRAMP_FRAME(frame, pc) \ + (alpha_osf_skip_sigtramp_frame (frame, pc)) +extern CORE_ADDR alpha_osf_skip_sigtramp_frame PARAMS ((struct frame_info *, CORE_ADDR)); + +#endif /* TM_ALPHA_H */ diff --git a/gdb/config/alpha/tm-alphalinux.h b/gdb/config/alpha/tm-alphalinux.h new file mode 100644 index 0000000..d836a70 --- /dev/null +++ b/gdb/config/alpha/tm-alphalinux.h @@ -0,0 +1,80 @@ +/* Definitions to make GDB run on an Alpha box under Linux. The + definitions here are used when the _target_ system is running Linux. + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_LINUXALPHA_H +#define TM_LINUXALPHA_H + +#include "alpha/tm-alpha.h" + +/* Are we currently handling a signal ? */ + +extern long alpha_linux_sigtramp_offset PARAMS ((CORE_ADDR)); +#undef IN_SIGTRAMP +#define IN_SIGTRAMP(pc, name) (alpha_linux_sigtramp_offset (pc) >= 0) + +/* Get start and end address of sigtramp handler. */ + +#define SIGTRAMP_START(pc) (pc - alpha_linux_sigtramp_offset (pc)) +#define SIGTRAMP_END(pc) (SIGTRAMP_START(pc) + 3*4) + + +/* Number of traps that happen between exec'ing the shell to run an + inferior, and when we finally get to the inferior code. This is 2 + on Linux and most implementations. */ + +#undef START_INFERIOR_TRAPS_EXPECTED +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* Return TRUE if procedure descriptor PROC is a procedure descriptor + that refers to a dynamically generated sigtramp function. */ + +#undef PROC_DESC_IS_DYN_SIGTRAMP +#define PROC_SIGTRAMP_MAGIC 0x0e0f0f0f +#define PROC_DESC_IS_DYN_SIGTRAMP(proc) ((proc)->pdr.isym \ + == PROC_SIGTRAMP_MAGIC) +#undef SET_PROC_DESC_IS_DYN_SIGTRAMP +#define SET_PROC_DESC_IS_DYN_SIGTRAMP(proc) ((proc)->pdr.isym \ + = PROC_SIGTRAMP_MAGIC) + +/* If PC is inside a dynamically generated sigtramp function, return + how many bytes the program counter is beyond the start of that + function. Otherwise, return a negative value. */ + +#undef DYNAMIC_SIGTRAMP_OFFSET +#define DYNAMIC_SIGTRAMP_OFFSET(pc) (alpha_linux_sigtramp_offset (pc)) + +/* Translate a signal handler frame into the address of the sigcontext + structure. */ + +#undef SIGCONTEXT_ADDR +#define SIGCONTEXT_ADDR(frame) ((frame)->frame - 0x298) + +/* If FRAME refers to a sigtramp frame, return the address of the next frame. + + Under Linux, sigtramp handlers have dynamically generated procedure + descriptors that make this hack unnecessary. */ + +#undef FRAME_PAST_SIGTRAMP_FRAME +#define FRAME_PAST_SIGTRAMP_FRAME(frame, pc) (0) + +/* We need this for the SOLIB_TRAMPOLINE stuff. */ +#include "tm-sysv4.h" + +#endif /* TM_LINUXALPHA_H */ diff --git a/gdb/config/alpha/xm-alphalinux.h b/gdb/config/alpha/xm-alphalinux.h new file mode 100644 index 0000000..a7aeab0 --- /dev/null +++ b/gdb/config/alpha/xm-alphalinux.h @@ -0,0 +1,29 @@ +/* Host definitions for GDB running on an Alpha under Linux + Copyright (C) 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#endif + +/* The alpha has no siginterrupt routine. */ +#define NO_SIGINTERRUPT + +#define HAVE_TERMIOS +#define HAVE_SIGSETMASK 1 +#define USG diff --git a/gdb/config/alpha/xm-alphaosf.h b/gdb/config/alpha/xm-alphaosf.h new file mode 100644 index 0000000..40b7fe0 --- /dev/null +++ b/gdb/config/alpha/xm-alphaosf.h @@ -0,0 +1,27 @@ +/* Host definitions for GDB running on an alpha under OSF/1 + Copyright (C) 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#endif + +/* The alpha has no siginterrupt routine. */ +#define NO_SIGINTERRUPT + +#define HAVE_TERMIOS diff --git a/gdb/config/arc/arc.mt b/gdb/config/arc/arc.mt new file mode 100644 index 0000000..8ee8c3d --- /dev/null +++ b/gdb/config/arc/arc.mt @@ -0,0 +1,3 @@ +# Target: ARC processor +TDEPFILES = arc-tdep.o +TM_FILE = tm-arc.h diff --git a/gdb/config/arc/tm-arc.h b/gdb/config/arc/tm-arc.h new file mode 100644 index 0000000..e964bef --- /dev/null +++ b/gdb/config/arc/tm-arc.h @@ -0,0 +1,347 @@ +/* Parameters for target machine ARC, for GDB, the GNU debugger. + Copyright (C) 1995 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Used by arc-tdep.c to set the default cpu type. */ +#define DEFAULT_ARC_CPU_TYPE "base" + +/* Byte order is selectable. */ +#define TARGET_BYTE_ORDER_SELECTABLE + +/* We have IEEE floating point, if we have any float at all. */ +#define IEEE_FLOAT + +/* Offset from address of function to start of its code. + Zero on most machines. */ +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. SKIP_PROLOGUE_FRAMELESS_P advances + the PC past some of the prologue, but stops as soon as it + knows that the function has a frame. Its result is equal + to its input PC if the function is frameless, unequal otherwise. */ + +#define SKIP_PROLOGUE(pc) \ + { pc = skip_prologue (pc, 0); } +#define SKIP_PROLOGUE_FRAMELESS_P(pc) \ + { pc = skip_prologue (pc, 1); } +extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR, int)); + +/* Sequence of bytes for breakpoint instruction. + ??? The current value is "sr -1,[-1]" and is for the simulator only. + The simulator watches for this and does the right thing. + The hardware version will have to associate with each breakpoint + the sequence "flag 1; nop; nop; nop". IE: The breakpoint insn will not + be a fixed set of bits but instead will be a branch to a semi-random + address. Presumably this will be cleaned up for "second silicon". */ +#define BIG_BREAKPOINT { 0x12, 0x1f, 0xff, 0xff } +#define LITTLE_BREAKPOINT { 0xff, 0xff, 0x1f, 0x12 } + +/* Given the exposed pipeline, there isn't any one correct value. + However, this value must be 4. GDB can't handle any other value (other than + zero). See for example infrun.c: + "prev_pc != stop_pc - DECR_PC_AFTER_BREAK" */ +/* FIXME */ +#define DECR_PC_AFTER_BREAK 8 + +/* We don't have a reliable single step facility. + ??? We do have a cycle single step facility, but that won't work. */ +#define SOFTWARE_SINGLE_STEP_P 1 +extern void arc_software_single_step PARAMS ((unsigned int, int)); +#define SOFTWARE_SINGLE_STEP(sig,bp_p) arc_software_single_step (sig, bp_p) + +/* FIXME: Need to set STEP_SKIPS_DELAY. */ + +/* Given a pc value as defined by the hardware, return the real address. + Remember that on the ARC blink contains that status register which + includes PC + flags (so we have to mask out the flags). */ +#define ARC_PC_TO_REAL_ADDRESS(pc) (((pc) & 0xffffff) << 2) + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function + executes some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + (ARC_PC_TO_REAL_ADDRESS (read_register (BLINK_REGNUM))) + +/* Stack grows upward */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ +#define REGISTER_SIZE 4 + +/* Number of machine registers */ +#define NUM_REGS 92 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES \ +{ \ + /* 0 */ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + /* 8 */ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + /* 16 */ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ + /* 24 */ "r24", "r25", "r26", "fp", "sp", "ilink1", "ilink2", "blink", \ + /* 32 */ "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", \ + /* 40 */ "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47", \ + /* 48 */ "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55", \ + /* 56 */ "r56", "mlo", "mmid", "mhi", "lp_count", \ + /* 61 */ "status", "sema", "lp_start", "lp_end", "identity", "debug", \ + /* 67 */ "aux10", "aux11", "aux12", "aux13", "aux14", \ + /* 72 */ "aux15", "aux16", "aux17", "aux18", "aux19", \ + /* 77 */ "aux1a", "aux1b", "aux1c", "aux1d", "aux1e", \ + /* 82 */ "aux1f", "aux20", "aux21", "aux22", \ + /* 86 */ "aux30", "aux31", "aux32", "aux33", "aux40", \ + /* 91 */ "pc" \ +} + +/* Register numbers of various important registers (used to index + into arrays of register names and register values). */ + +#define R0_REGNUM 0 /* First local register */ +#define R59_REGNUM 59 /* Last local register */ +#define FP_REGNUM 27 /* Contains address of executing stack frame */ +#define SP_REGNUM 28 /* stack pointer */ +#define BLINK_REGNUM 31 /* link register */ +#define STA_REGNUM 61 /* processor status word */ +#define PC_REGNUM 91 /* instruction pointer */ +#define AUX_BEG_REGNUM 61 /* aux reg begins */ +#define AUX_END_REGNUM 90 /* aux reg ends, pc not real aux reg */ + +/* Fake registers used to mark immediate data. */ +#define SHIMM_FLAG_REGNUM 61 +#define LIMM_REGNUM 62 +#define SHIMM_REGNUM 63 + +#define AUX_REG_MAP \ +{ \ + { 0, 1, 2, 3, 4, 5, \ + 16, -1, -1, -1, -1, \ + -1, -1, -1, -1, -1, \ + -1, -1, -1, -1, 30, \ + -1, 32, 33, -1, \ + 48, 49, 50, 51, 64, \ + 0 \ + }, \ + { 0, 1, 2, 3, 4, 5, \ + 16, -1, -1, -1, -1, \ + -1, -1, -1, -1, -1, \ + -1, -1, -1, -1, 30, \ + 31, 32, 33, -1, \ + -1, -1, -1, -1, -1, \ + 0 \ + }, \ + { 0, 1, 2, 3, 4, 5, \ + 16, 17, 18, 19, 20, \ + 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, \ + 31, 32, 33, 34, \ + -1, -1, -1, -1, -1, \ + 0 \ + } \ +} + +#define PFP_REGNUM R0_REGNUM /* Previous frame pointer */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for register N. */ +#define REGISTER_BYTE(N) (4*(N)) + +/* Number of bytes of storage in the actual machine representation + for register N. */ +#define REGISTER_RAW_SIZE(N) 4 + +/* Number of bytes of storage in the program's representation for register N. */ +#define REGISTER_VIRTUAL_SIZE(N) 4 + +/* Largest value REGISTER_RAW_SIZE can have. */ +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ +#define REGISTER_VIRTUAL_TYPE(N) (builtin_type_int) + + +/* Macros for understanding function return values... */ + +/* Does the specified function use the "struct returning" convention + or the "value returning" convention? The "value returning" convention + almost invariably returns the entire value in registers. The + "struct returning" convention often returns the entire value in + memory, and passes a pointer (out of or into the function) saying + where the value (is or should go). + + Since this sometimes depends on whether it was compiled with GCC, + this is also an argument. This is used in call_function to build a + stack, and in value_being_returned to print return values. + + On arc, a structure is always retunred with pointer in r0. */ + +#define USE_STRUCT_CONVENTION(gcc_p, type) 1 + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. This is only called if USE_STRUCT_CONVENTION for this + type is 0. +*/ +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy(VALBUF, REGBUF+REGISTER_BYTE(R0_REGNUM), TYPE_LENGTH (TYPE)) + +/* If USE_STRUCT_CONVENTION produces a 1, + extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (error("Don't know where large structure is returned on arc"), 0) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format, for "value returning" functions. + For 'return' command: not (yet) implemented for arc. */ +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + error ("Returning values from functions is not implemented in arc gdb") + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ +#define STORE_STRUCT_RETURN(ADDR, SP) \ + error ("Returning values from functions is not implemented in arc gdb") + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* We cache information about saved registers in the frame structure, + to save us from having to re-scan function prologues every time + a register in a non-current frame is accessed. */ + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs *fsr; \ + CORE_ADDR arg_pointer; + +/* Zero the frame_saved_regs pointer when the frame is initialized, + so that FRAME_FIND_SAVED_REGS () will know to allocate and + initialize a frame_saved_regs struct the first time it is called. + Set the arg_pointer to -1, which is not valid; 0 and other values + indicate real, cached values. */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + ((fi)->fsr = 0, (fi)->arg_pointer = -1) + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ +/* On the arc, we get the chain pointer by reading the PFP saved + on the stack. */ +/* The PFP and RPC is in fp and fp+4. */ + +#define FRAME_CHAIN(thisframe) \ + (read_memory_integer (FRAME_FP (thisframe), 4)) + +/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one + and has no caller. */ +#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe) + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + do { \ + if ((FI)->signal_handler_caller) \ + (FRAMELESS) = 0; \ + else \ + (FRAMELESS) = frameless_look_for_prologue (FI); \ + } while (0) + +/* Where is the PC for a specific frame. + A leaf function may never save blink, so we have to check for that here. */ + +#define FRAME_SAVED_PC(frame) (arc_frame_saved_pc (frame)) +struct frame_info; /* in case frame.h not included yet */ +CORE_ADDR arc_frame_saved_pc PARAMS ((struct frame_info *)); + +/* If the argument is on the stack, it will be here. + We cache this value in the frame info if we've already looked it up. */ +/* ??? Is the arg_pointer check necessary? */ + +#define FRAME_ARGS_ADDRESS(fi) \ + (((fi)->arg_pointer != -1) ? (fi)->arg_pointer : (fi)->frame) + +/* This is the same except it should return 0 when + it does not really know where the args are, rather than guessing. + This value is not cached since it is only used infrequently. */ + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set NUMARGS to the number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Produce the positions of the saved registers in a stack frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info_addr, sr) \ + frame_find_saved_regs (frame_info_addr, &sr) +extern void frame_find_saved_regs(); /* See arc-tdep.c */ + + +/* Things needed for making calls to functions in the inferior process */ +#define PUSH_DUMMY_FRAME \ + push_dummy_frame () + +/* Discard from the stack the innermost frame, restoring all registers. */ +#define POP_FRAME \ + pop_frame () + +/* This sequence of words is the instructions bl xxxx, flag 1 */ +#define CALL_DUMMY { 0x28000000, 0x1fbe8001 } +#define CALL_DUMMY_LENGTH 8 + +/* Start execution at beginning of dummy */ +#define CALL_DUMMY_START_OFFSET 0 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at 'dummyname'.*/ +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + int from, to, delta, loc; \ + loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \ + from = loc + 4; \ + to = (int)(fun); \ + delta = (to - from) >> 2; \ + *((char *)(dummyname) + 1) = (delta & 0x1); \ + *((char *)(dummyname) + 2) = ((delta >> 1) & 0xff); \ + *((char *)(dummyname) + 3) = ((delta >> 9) & 0xff); \ + *((char *)(dummyname) + 4) = ((delta >> 17) & 0x7); \ +} + diff --git a/gdb/config/arm/arm.mh b/gdb/config/arm/arm.mh new file mode 100644 index 0000000..4fcf0de --- /dev/null +++ b/gdb/config/arm/arm.mh @@ -0,0 +1,5 @@ +# Host: Acorn RISC machine running RISCiX (4.3bsd) +XDEPFILES= infptrace.o inftarg.o fork-child.o arm-xdep.o arm-convert.o +XM_FILE= xm-arm.h + +NAT_FILE= nm-arm.h diff --git a/gdb/config/arm/arm.mt b/gdb/config/arm/arm.mt new file mode 100644 index 0000000..4933c46 --- /dev/null +++ b/gdb/config/arm/arm.mt @@ -0,0 +1,6 @@ +# Target: Acorn RISC machine (ARM) with simulator +TDEPFILES= arm-tdep.o remote-rdp.o +TM_FILE= tm-arm.h + +SIM_OBS = remote-sim.o +SIM = ../sim/arm/libsim.a diff --git a/gdb/config/arm/nm-arm.h b/gdb/config/arm/nm-arm.h new file mode 100644 index 0000000..970a885 --- /dev/null +++ b/gdb/config/arm/nm-arm.h @@ -0,0 +1,27 @@ +/* Definitions to make GDB run on an ARM under RISCiX (4.3bsd). + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0x01000000 - (UPAGES * NBPG)) + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS +#define HOST_BYTE_ORDER LITTLE_ENDIAN diff --git a/gdb/config/arm/tm-arm.h b/gdb/config/arm/tm-arm.h new file mode 100644 index 0000000..b327ac3 --- /dev/null +++ b/gdb/config/arm/tm-arm.h @@ -0,0 +1,453 @@ +/* Definitions to make GDB target for an ARM + Copyright 1986, 1987, 1989, 1991, 1993, 1997, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct type; +struct value; +#endif + +#define TARGET_BYTE_ORDER_SELECTABLE + +/* IEEE format floating point */ + +#define IEEE_FLOAT + +/* FIXME: may need a floatformat_ieee_double_bigbyte_littleword format for + BIG_ENDIAN use. -fnf */ + +#define TARGET_DOUBLE_FORMAT (target_byte_order == BIG_ENDIAN \ + ? &floatformat_ieee_double_big \ + : &floatformat_ieee_double_littlebyte_bigword) + +/* When reading symbols, we need to zap the low bit of the address, which + may be set to 1 for Thumb functions. */ + +#define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x1) + +/* Remove useless bits from addresses in a running program. */ + +CORE_ADDR arm_addr_bits_remove PARAMS ((CORE_ADDR)); + +#define ADDR_BITS_REMOVE(val) (arm_addr_bits_remove (val)) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR arm_skip_prologue PARAMS ((CORE_ADDR pc)); + +#define SKIP_PROLOGUE(pc) { pc = arm_skip_prologue (pc); } + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) arm_saved_pc_after_call (frame) +struct frame_info; +extern CORE_ADDR arm_saved_pc_after_call PARAMS ((struct frame_info *)); + +/* I don't know the real values for these. */ +#define TARGET_UPAGES UPAGES +#define TARGET_NBPG NBPG + +/* Address of end of stack space. */ + +#define STACK_END_ADDR (0x01000000 - (TARGET_UPAGES * TARGET_NBPG)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* !!!! if we're using RDP, then we're inserting breakpoints and storing + their handles instread of what was in memory. It is nice that + this is the same size as a handle - otherwise remote-rdp will + have to change. */ + +/* BREAKPOINT_FROM_PC uses the program counter value to determine whether a + 16- or 32-bit breakpoint should be used. It returns a pointer + to a string of bytes that encode a breakpoint instruction, stores + the length of the string to *lenptr, and adjusts the pc (if necessary) to + point to the actual memory location where the breakpoint should be + inserted. */ + +extern breakpoint_from_pc_fn arm_breakpoint_from_pc; +#define BREAKPOINT_FROM_PC(pcptr, lenptr) arm_breakpoint_from_pc (pcptr, lenptr) + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* code to execute to print interesting information about the + * floating point processor (if any) + * No need to define if there is nothing to do. + */ +#define FLOAT_INFO { arm_float_info (); } + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +/* Note: I make a fake copy of the pc in register 25 (calling it ps) so + that I can clear the status bits from pc (register 15) */ + +#define NUM_REGS 26 + +/* An array of names of registers. */ + +extern char **arm_register_names; +#define REGISTER_NAME(i) arm_register_names[i] + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define A1_REGNUM 0 /* first integer-like argument */ +#define A4_REGNUM 3 /* last integer-like argument */ +#define AP_REGNUM 11 +#define FP_REGNUM 11 /* Contains address of executing stack frame */ +#define SP_REGNUM 13 /* Contains address of top of stack */ +#define LR_REGNUM 14 /* address to return to from a function call */ +#define PC_REGNUM 15 /* Contains program counter */ +#define F0_REGNUM 16 /* first floating point register */ +#define F3_REGNUM 19 /* last floating point argument register */ +#define F7_REGNUM 23 /* last floating point register */ +#define FPS_REGNUM 24 /* floating point status register */ +#define PS_REGNUM 25 /* Contains processor status */ + +#define THUMB_FP_REGNUM 7 /* R7 is frame register on Thumb */ + +#define ARM_NUM_ARG_REGS 4 +#define ARM_LAST_ARG_REGNUM A4_REGNUM +#define ARM_NUM_FP_ARG_REGS 4 +#define ARM_LAST_FP_ARG_REGNUM F3_REGNUM + +/* Instruction condition field values. */ +#define INST_EQ 0x0 +#define INST_NE 0x1 +#define INST_CS 0x2 +#define INST_CC 0x3 +#define INST_MI 0x4 +#define INST_PL 0x5 +#define INST_VS 0x6 +#define INST_VC 0x7 +#define INST_HI 0x8 +#define INST_LS 0x9 +#define INST_GE 0xa +#define INST_LT 0xb +#define INST_GT 0xc +#define INST_LE 0xd +#define INST_AL 0xe +#define INST_NV 0xf + +#define FLAG_N 0x80000000 +#define FLAG_Z 0x40000000 +#define FLAG_C 0x20000000 +#define FLAG_V 0x10000000 + + + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (16*4 + 12*8 + 4 + 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) (((N) < F0_REGNUM) ? (N)*4 : \ + (((N) < PS_REGNUM) ? 16*4 + ((N) - 16)*12 : \ + 16*4 + 8*12 + ((N) - FPS_REGNUM) * 4)) + +/* Number of bytes of storage in the actual machine representation + for register N. On the vax, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 12) + +/* Number of bytes of storage in the program's representation + for register N. On the vax, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 8) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 12 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ +#define REGISTER_CONVERTIBLE(N) ((unsigned)(N) - F0_REGNUM < 8) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + convert_from_extended ((FROM), & val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + convert_to_extended (&val, (TO)); \ +} +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((unsigned)(N) - F0_REGNUM) < 8 ? builtin_type_double : builtin_type_int) + +/* The system C compiler uses a similar structure return convention to gcc */ +extern use_struct_convention_fn arm_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) arm_use_struct_convention (gcc_p, type) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (0, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + convert_from_extended (REGBUF + REGISTER_BYTE (F0_REGNUM), VALBUF); \ + else \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) { \ + char _buf[MAX_REGISTER_RAW_SIZE]; \ + convert_to_extended (VALBUF, _buf); \ + write_register_bytes (REGISTER_BYTE (F0_REGNUM), _buf, MAX_REGISTER_RAW_SIZE); \ + } else \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Specify that for the native compiler variables for a particular + lexical context are listed after the beginning LBRAC instead of + before in the executables list of symbols. */ +#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (!(gcc_p)) + + +/* Define other aspects of the stack frame. + We keep the offsets of all saved registers, 'cause we need 'em a lot! + We also keep the current size of the stack frame, and the offset of + the frame pointer from the stack pointer (for frameless functions, and + when we're still in the prologue of a function with a frame) */ + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs fsr; \ + int framesize; \ + int frameoffset; \ + int framereg; + +extern void arm_init_extra_frame_info PARAMS ((struct frame_info *fi)); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) arm_init_extra_frame_info (fi) + +/* Return the frame address. On ARM, it is R11; on Thumb it is R7. */ +CORE_ADDR arm_target_read_fp PARAMS ((void)); +#define TARGET_READ_FP() arm_target_read_fp () + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +#define FRAME_CHAIN(thisframe) (CORE_ADDR) arm_frame_chain (thisframe) +extern CORE_ADDR arm_frame_chain PARAMS ((struct frame_info *)); + +extern int arm_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) arm_frame_chain_valid (chain, thisframe) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ +{ \ + CORE_ADDR func_start, after_prologue; \ + func_start = (get_pc_function_start ((FI)->pc) + \ + FUNCTION_START_OFFSET); \ + after_prologue = func_start; \ + SKIP_PROLOGUE (after_prologue); \ + (FRAMELESS) = (after_prologue == func_start); \ +} + +/* Saved Pc. */ + +#define FRAME_SAVED_PC(FRAME) arm_frame_saved_pc (FRAME) +extern CORE_ADDR arm_frame_saved_pc PARAMS ((struct frame_info *)); + +#define FRAME_ARGS_ADDRESS(fi) (fi->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +struct frame_saved_regs; +struct frame_info; +void frame_find_saved_regs PARAMS((struct frame_info *fi, + struct frame_saved_regs *fsr)); + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + arm_frame_find_saved_regs (frame_info, &(frame_saved_regs)); + + +/* Things needed for making the inferior call functions. */ + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = arm_push_arguments ((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR +arm_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); + +/* Push an empty stack frame, to record the current PC, etc. */ + +void arm_push_dummy_frame PARAMS ((void)); + +#define PUSH_DUMMY_FRAME arm_push_dummy_frame () + +/* Discard from the stack the innermost frame, restoring all registers. */ + +void arm_pop_frame PARAMS ((void)); + +#define POP_FRAME arm_pop_frame () + +/* This sequence of words is the instructions + + mov lr,pc + mov pc,r4 + illegal + + Note this is 12 bytes. */ + +#define CALL_DUMMY {0xe1a0e00f, 0xe1a0f004, 0xE7FFDEFE} + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +#define CALL_DUMMY_BREAKPOINT_OFFSET arm_call_dummy_breakpoint_offset() +extern int arm_call_dummy_breakpoint_offset PARAMS ((void)); + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + arm_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p) + +void arm_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun, + int nargs, struct value **args, + struct type *type, int gcc_p)); + +CORE_ADDR arm_get_next_pc PARAMS ((CORE_ADDR)); + +/* Functions for dealing with Thumb call thunks. */ +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) arm_in_call_stub (pc, name) +#define SKIP_TRAMPOLINE_CODE(pc) arm_skip_stub (pc) +extern int arm_in_call_stub PARAMS ((CORE_ADDR pc, char *name)); +extern CORE_ADDR arm_skip_stub PARAMS ((CORE_ADDR pc)); + +/* Function to determine whether MEMADDR is in a Thumb function. */ +extern int arm_pc_is_thumb PARAMS ((bfd_vma memaddr)); + +/* Function to determine whether MEMADDR is in a call dummy called from + a Thumb function. */ +extern int arm_pc_is_thumb_dummy PARAMS ((bfd_vma memaddr)); + +/* Macros for setting and testing a bit in a minimal symbol that + marks it as Thumb function. The MSB of the minimal symbol's + "info" field is used for this purpose. This field is already + being used to store the symbol size, so the assumption is + that the symbol size cannot exceed 2^31. + + COFF_MAKE_MSYMBOL_SPECIAL + ELF_MAKE_MSYMBOL_SPECIAL tests whether the COFF or ELF symbol corresponds + to a thumb function, and sets a "special" bit in a + minimal symbol to indicate that it does + MSYMBOL_SET_SPECIAL actually sets the "special" bit + MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol + MSYMBOL_SIZE returns the size of the minimal symbol, i.e. + the "info" field with the "special" bit masked out +*/ + +extern int coff_sym_is_thumb(int val); +#define MSYMBOL_SET_SPECIAL(msym) \ + MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) | 0x80000000) +#define MSYMBOL_IS_SPECIAL(msym) \ + (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0) +#define MSYMBOL_SIZE(msym) \ + ((long) MSYMBOL_INFO (msym) & 0x7fffffff) + +/* Thumb symbol are of type STT_LOPROC, (synonymous with STT_ARM_TFUNC) */ +#define ELF_MAKE_MSYMBOL_SPECIAL(sym,msym) \ + { if(ELF_ST_TYPE(((elf_symbol_type *)(sym))->internal_elf_sym.st_info) == STT_LOPROC) \ + MSYMBOL_SET_SPECIAL(msym); } + +#define COFF_MAKE_MSYMBOL_SPECIAL(val,msym) \ + { if(coff_sym_is_thumb(val)) MSYMBOL_SET_SPECIAL(msym); } + +#undef IN_SIGTRAMP +#define IN_SIGTRAMP(pc, name) 0 diff --git a/gdb/config/arm/xm-arm.h b/gdb/config/arm/xm-arm.h new file mode 100644 index 0000000..34c0bd3 --- /dev/null +++ b/gdb/config/arm/xm-arm.h @@ -0,0 +1,76 @@ +/* Definitions to make GDB run on an ARM under RISCiX (4.3bsd). + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + + +#if 0 +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \ + 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0} + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movl $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("pushl fp"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("pushl 8(sp)"); \ + asm ("pushl 8(sp)"); \ + asm ("pushal 0x14(sp)"); \ + asm ("pushr $037777"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("popr $037777"); \ + asm ("subl2 $8,(sp)"); \ + asm ("movl (sp),sp"); \ + asm ("rei"); } +#endif /* 0 */ diff --git a/gdb/config/convex/Convex.notes b/gdb/config/convex/Convex.notes new file mode 100644 index 0000000..28d336b --- /dev/null +++ b/gdb/config/convex/Convex.notes @@ -0,0 +1,163 @@ + +@node Convex,,, Top +@appendix Convex-specific info +@cindex Convex notes + +Scalar registers are 64 bits long, which is a pain since +left half of an S register frequently contains noise. +Therefore there are two ways to obtain the value of an S register. + +@table @kbd +@item $s0 +returns the low half of the register as an int + +@item $S0 +returns the whole register as a long long +@end table + +You can print the value in floating point by using @samp{p/f $s0} or @samp{p/f $S0} +to print a single or double precision value. + +@cindex vector registers +Vector registers are handled similarly, with @samp{$V0} denoting the whole +64-bit register and @kbd{$v0} denoting the 32-bit low half; @samp{p/f $v0} +or @samp{p/f $V0} can be used to examine the register in floating point. +The length of the vector registers is taken from @samp{$vl}. + +Individual elements of a vector register are denoted in the obvious way; +@samp{print $v3[9]} prints the tenth element of register @kbd{v3}, and +@samp{set $v3[9] = 1234} alters it. + +@kbd{$vl} and @kbd{$vs} are int, and @kbd{$vm} is an int vector. +Elements of @kbd{$vm} can't be assigned to. + +@cindex communication registers +@kindex info comm-registers +Communication registers have names @kbd{$C0 .. $C63}, with @kbd{$c0 .. $c63} +denoting the low-order halves. @samp{info comm-registers} will print them +all out, and tell which are locked. (A communication register is +locked when a value is sent to it, and unlocked when the value is +received.) Communication registers are, of course, global to all +threads, so it does not matter what the currently selected thread is. +@samp{info comm-reg @var{name}} prints just that one communication +register; @samp{name} may also be a communication register number +@samp{nn} or @samp{0xnn}. +@samp{info comm-reg @var{address}} prints the contents of the resource +structure at that address. + +@kindex info psw +The command @samp{info psw} prints the processor status word @kbd{$ps} +bit by bit. + +@kindex set base +GDB normally prints all integers in base 10, but the leading +@kbd{0x80000000} of pointers is intolerable in decimal, so the default +output radix has been changed to try to print addresses appropriately. +The @samp{set base} command can be used to change this. + +@table @code +@item set base 10 +Integer values always print in decimal. + +@item set base 16 +Integer values always print in hex. + +@item set base +Go back to the initial state, which prints integer values in hex if they +look like pointers (specifically, if they start with 0x8 or 0xf in the +stack), otherwise in decimal. +@end table + +@kindex set pipeline +When an exception such as a bus error or overflow happens, usually the PC +is several instructions ahead by the time the exception is detected. +The @samp{set pipe} command will disable this. + +@table @code +@item set pipeline off +Forces serial execution of instructions; no vector chaining and no +scalar instruction overlap. With this, exceptions are detected with +the PC pointing to the instruction after the one in error. + +@item set pipeline on +Returns to normal, fast, execution. This is the default. +@end table + +@cindex parallel +In a parallel program, multiple threads may be executing, each +with its own registers, stack, and local memory. When one of them +hits a breakpoint, that thread is selected. Other threads do +not run while the thread is in the breakpoint. + +@kindex 1cont +The selected thread can be single-stepped, given signals, and so +on. Any other threads remain stopped. When a @samp{cont} command is given, +all threads are resumed. To resume just the selected thread, use +the command @samp{1cont}. + +@kindex thread +The @samp{thread} command will show the active threads and the +instruction they are about to execute. The selected thread is marked +with an asterisk. The command @samp{thread @var{n}} will select thread @var{n}, +shifting the debugger's attention to it for single-stepping, +registers, local memory, and so on. + +@kindex info threads +The @samp{info threads} command will show what threads, if any, have +invisibly hit breakpoints or signals and are waiting to be noticed. + +@kindex set parallel +The @samp{set parallel} command controls how many threads can be active. + +@table @code +@item set parallel off +One thread. Requests by the program that other threads join in +(spawn and pfork instructions) do not cause other threads to start up. +This does the same thing as the @samp{limit concurrency 1} command. + +@item set parallel fixed +All CPUs are assigned to your program whenever it runs. When it +executes a pfork or spawn instruction, it begins parallel execution +immediately. This does the same thing as the @samp{mpa -f} command. + +@item set parallel on +One or more threads. Spawn and pfork cause CPUs to join in when and if +they are free. This is the default. It is very good for system +throughput, but not very good for finding bugs in parallel code. If you +suspect a bug in parallel code, you probably want @samp{set parallel fixed.} +@end table + +@subsection Limitations + +WARNING: Convex GDB evaluates expressions in long long, because S +registers are 64 bits long. However, GDB expression semantics are not +exactly C semantics. This is a bug, strictly speaking, but it's not one I +know how to fix. If @samp{x} is a program variable of type int, then it +is also type int to GDB, but @samp{x + 1} is long long, as is @samp{x + y} +or any other expression requiring computation. So is the expression +@samp{1}, or any other constant. You only really have to watch out for +calls. The innocuous expression @samp{list_node (0x80001234)} has an +argument of type long long. You must explicitly cast it to int. + +It is not possible to continue after an uncaught fatal signal by using +@samp{signal 0}, @samp{return}, @samp{jump}, or anything else. The difficulty is with +Unix, not GDB. + +I have made no big effort to make such things as single-stepping a +@kbd{join} instruction do something reasonable. If the program seems to +hang when doing this, type @kbd{ctrl-c} and @samp{cont}, or use +@samp{thread} to shift to a live thread. Single-stepping a @kbd{spawn} +instruction apparently causes new threads to be born with their T bit set; +this is not handled gracefully. When a thread has hit a breakpoint, other +threads may have invisibly hit the breakpoint in the background; if you +clear the breakpoint gdb will be surprised when threads seem to continue +to stop at it. All of these situations produce spurious signal 5 traps; +if this happens, just type @samp{cont}. If it becomes a nuisance, use +@samp{handle 5 nostop}. (It will ask if you are sure. You are.) + +There is no way in GDB to store a float in a register, as with +@kbd{set $s0 = 3.1416}. The identifier @kbd{$s0} denotes an integer, +and like any C expression which assigns to an integer variable, the +right-hand side is casted to type int. If you should need to do +something like this, you can assign the value to @kbd{@{float@} ($sp-4)} +and then do @kbd{set $s0 = $sp[-4]}. Same deal with @kbd{set $v0[69] = 6.9}. diff --git a/gdb/config/convex/convex.mh b/gdb/config/convex/convex.mh new file mode 100644 index 0000000..35a121f --- /dev/null +++ b/gdb/config/convex/convex.mh @@ -0,0 +1,3 @@ +# Host: Convex Unix (4bsd) +XDEPFILES= convex-xdep.o +XM_FILE= xm-convex.h diff --git a/gdb/config/convex/convex.mt b/gdb/config/convex/convex.mt new file mode 100644 index 0000000..eefbeb3 --- /dev/null +++ b/gdb/config/convex/convex.mt @@ -0,0 +1,3 @@ +# Target: Convex Unix (4bsd) +TDEPFILES= convex-tdep.o +TM_FILE= tm-convex.h diff --git a/gdb/config/convex/tm-convex.h b/gdb/config/convex/tm-convex.h new file mode 100644 index 0000000..5eb9f6e --- /dev/null +++ b/gdb/config/convex/tm-convex.h @@ -0,0 +1,511 @@ +/* Definitions to make GDB run on Convex Unix (4bsd) + Copyright 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* There is come problem with the debugging symbols generated by the + compiler such that the debugging symbol for the first line of a + function overlap with the function prologue. */ +#define PROLOGUE_FIRSTLINE_OVERLAP + +/* When convex pcc says CHAR or SHORT, it provides the correct address. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* Symbol types to ignore. */ +/* 0xc4 is N_MONPT. Use the numeric value for the benefit of people + with (rather) old OS's. */ +#define IGNORE_SYMBOL(TYPE) \ + (((TYPE) & ~N_EXT) == N_TBSS \ + || ((TYPE) & ~N_EXT) == N_TDATA \ + || ((TYPE) & ~N_EXT) == 0xc4) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. + Convex prolog is: + [sub.w #-,sp] in one of 3 possible sizes + [mov psw,- fc/vc main program prolog + and #-,- (skip it because the "mov psw" saves the + mov -,psw] T bit, so continue gets a surprise trap) + [and #-,sp] fc/vc O2 main program prolog + [ld.- -(ap),-] pcc/gcc register arg loads +*/ + +#define SKIP_PROLOGUE(pc) \ +{ int op, ix; \ + op = read_memory_integer (pc, 2); \ + if ((op & 0xffc7) == 0x5ac0) pc += 2; \ + else if (op == 0x1580) pc += 4; \ + else if (op == 0x15c0) pc += 6; \ + if ((read_memory_integer (pc, 2) & 0xfff8) == 0x7c40 \ + && (read_memory_integer (pc + 2, 2) & 0xfff8) == 0x1240 \ + && (read_memory_integer (pc + 8, 2) & 0xfff8) == 0x7c48) \ + pc += 10; \ + if (read_memory_integer (pc, 2) == 0x1240) pc += 6; \ + for (;;) { \ + op = read_memory_integer (pc, 2); \ + ix = (op >> 3) & 7; \ + if (ix != 6) break; \ + if ((op & 0xfcc0) == 0x3000) pc += 4; \ + else if ((op & 0xfcc0) == 0x3040) pc += 6; \ + else if ((op & 0xfcc0) == 0x2800) pc += 4; \ + else if ((op & 0xfcc0) == 0x2840) pc += 6; \ + else break;}} + +/* Immediately after a function call, return the saved pc. + (ignore frame and return *$sp so we can handle both calls and callq) */ + +#define SAVED_PC_AFTER_CALL(frame) \ + read_memory_integer (read_register (SP_REGNUM), 4) + +/* Address of end of stack space. + This is ((USRSTACK + 0xfff) & -0x1000)) from <convex/vmparam.h> but + that expression depends on the kernel version; instead, fetch a + page-zero pointer and get it from that. This will be invalid if + they ever change the way bkpt signals are delivered. */ + +#define STACK_END_ADDR (0xfffff000 & *(unsigned *) 0x80000050) + +/* User-mode traps push an extended rtn block, + then fault with one of the following PCs */ + +#define is_trace_pc(pc) ((unsigned) ((pc) - (*(int *) 0x80000040)) <= 4) +#define is_arith_pc(pc) ((unsigned) ((pc) - (*(int *) 0x80000044)) <= 4) +#define is_break_pc(pc) ((unsigned) ((pc) - (*(int *) 0x80000050)) <= 4) + +/* We need to manipulate trap bits in the psw */ + +#define PSW_TRAP_FLAGS 0x69670000 +#define PSW_T_BIT 0x08000000 +#define PSW_S_BIT 0x01000000 + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. (bkpt) */ + +#define BREAKPOINT {0x7d,0x50} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT but not always. + (The break PC needs to be decremented by 2, but we do it when the + break frame is recognized and popped. That way gdb can tell breaks + from trace traps with certainty.) */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 8 + +/* Number of machine registers */ + +#define NUM_REGS 26 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"pc","psw","fp","ap","a5","a4","a3","a2","a1","sp",\ + "s7","s6","s5","s4","s3","s2","s1","s0",\ + "S7","S6","S5","S4","S3","S2","S1","S0"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define S0_REGNUM 25 /* the real S regs */ +#define S7_REGNUM 18 +#define s0_REGNUM 17 /* low-order halves of S regs */ +#define s7_REGNUM 10 +#define SP_REGNUM 9 /* A regs */ +#define A1_REGNUM 8 +#define A5_REGNUM 4 +#define AP_REGNUM 3 +#define FP_REGNUM 2 /* Contains address of executing stack frame */ +#define PS_REGNUM 1 /* Contains processor status */ +#define PC_REGNUM 0 /* Contains program counter */ + +/* convert dbx stab register number (from `r' declaration) to a gdb REGNUM */ + +#define STAB_REG_TO_REGNUM(value) \ + ((value) < 8 ? S0_REGNUM - (value) : SP_REGNUM - ((value) - 8)) + +/* Vector register numbers, not handled as ordinary regs. + They are treated as convenience variables whose values are read + from the inferior when needed. */ + +#define V0_REGNUM 0 +#define V7_REGNUM 7 +#define VM_REGNUM 8 +#define VS_REGNUM 9 +#define VL_REGNUM 10 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (4*10 + 8*8) + +/* Index within `registers' of the first byte of the space for + register N. + NB: must match structure of struct syscall_context for correct operation */ + +#define REGISTER_BYTE(N) ((N) < s7_REGNUM ? 4*(N) : \ + (N) < S7_REGNUM ? 44 + 8 * ((N)-s7_REGNUM) : \ + 40 + 8 * ((N)-S7_REGNUM)) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) ((N) < S7_REGNUM ? 4 : 8) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) < S7_REGNUM ? builtin_type_int : builtin_type_long_long) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (A1_REGNUM, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, &((char *) REGBUF) [REGISTER_BYTE (S0_REGNUM) + \ + 8 - TYPE_LENGTH (TYPE)],\ + TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (S0_REGNUM), VALBUF, 8) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (*(int *) & ((char *) REGBUF) [REGISTER_BYTE (s0_REGNUM)]) + +/* Define trapped internal variable hooks to read and write + vector and communication registers. */ + +#define IS_TRAPPED_INTERNALVAR is_trapped_internalvar +#define VALUE_OF_TRAPPED_INTERNALVAR value_of_trapped_internalvar +#define SET_TRAPPED_INTERNALVAR set_trapped_internalvar + +extern struct value *value_of_trapped_internalvar (); + +/* Hooks to read data from soff exec and core files, + and to describe the files. */ + +#define FILES_INFO_HOOK print_maps + +/* Hook to call to print a typeless integer value, normally printed in decimal. + For convex, use hex instead if the number looks like an address. */ + +#define PRINT_TYPELESS_INTEGER decout + +/* For the native compiler, variables for a particular lexical context + are listed after the beginning LBRAC instead of before in the + executables list of symbols. Using "gcc_compiled." to distinguish + between GCC and native compiler doesn't work on Convex because the + linker sorts the symbols to put "gcc_compiled." in the wrong place. + desc is nonzero for native, zero for gcc. */ +#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (desc != 0) + +/* Pcc occaisionally puts an SO where there should be an SOL. */ +#define PCC_SOL_BROKEN + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame_info with a frame's nominal address in fi->frame, + and produces the frame's chain-pointer. */ + +/* (caller fp is saved at 8(fp)) */ + +#define FRAME_CHAIN(fi) (read_memory_integer ((fi)->frame + 8, 4)) + +/* Define other aspects of the stack frame. */ + +/* We need the boundaries of the text in the exec file, as a kludge, + for FRAMELESS_FUNCTION_INVOCATION and CALL_DUMMY_LOCATION. */ + +#define NEED_TEXT_START_END 1 + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. + On convex, check at the return address for `callq' -- if so, frameless, + otherwise, not. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ +{ \ + extern CORE_ADDR text_start, text_end; \ + CORE_ADDR call_addr = SAVED_PC_AFTER_CALL (FI); \ + (FRAMELESS) = (call_addr >= text_start && call_addr < text_end \ + && read_memory_integer (call_addr - 6, 1) == 0x22); \ +} + +#define FRAME_SAVED_PC(fi) (read_memory_integer ((fi)->frame, 4)) + +#define FRAME_ARGS_ADDRESS(fi) (read_memory_integer ((fi)->frame + 12, 4)) + +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) \ +{ numargs = read_memory_integer (FRAME_ARGS_ADDRESS (fi) - 4, 4); \ + if (numargs < 0 || numargs >= 256) numargs = -1;} + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +/* Normal (short) frames save only PC, FP, (callee's) AP. To reasonably + handle gcc and pcc register variables, scan the code following the + call for the instructions the compiler inserts to reload register + variables from stack slots and record the stack slots as the saved + locations of those registers. This will occasionally identify some + random load as a saved register; this is harmless. vc does not + declare its register allocation actions in the stabs. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ register int regnum; \ + register int frame_length = /* 3 short, 2 long, 1 extended, 0 context */\ + (read_memory_integer ((frame_info)->frame + 4, 4) >> 25) & 3; \ + register CORE_ADDR frame_fp = \ + read_memory_integer ((frame_info)->frame + 8, 4); \ + register CORE_ADDR next_addr; \ + memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 0; \ + (frame_saved_regs).regs[PS_REGNUM] = (frame_info)->frame + 4; \ + (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame + 8; \ + (frame_saved_regs).regs[AP_REGNUM] = frame_fp + 12; \ + next_addr = (frame_info)->frame + 12; \ + if (frame_length < 3) \ + for (regnum = A5_REGNUM; regnum < SP_REGNUM; ++regnum) \ + (frame_saved_regs).regs[regnum] = (next_addr += 4); \ + if (frame_length < 2) \ + (frame_saved_regs).regs[SP_REGNUM] = (next_addr += 4); \ + next_addr -= 4; \ + if (frame_length < 3) \ + for (regnum = S7_REGNUM; regnum < S0_REGNUM; ++regnum) \ + (frame_saved_regs).regs[regnum] = (next_addr += 8); \ + if (frame_length < 2) \ + (frame_saved_regs).regs[S0_REGNUM] = (next_addr += 8); \ + else \ + (frame_saved_regs).regs[SP_REGNUM] = next_addr + 8; \ + if (frame_length == 3) { \ + CORE_ADDR pc = read_memory_integer ((frame_info)->frame, 4); \ + int op, ix, disp; \ + op = read_memory_integer (pc, 2); \ + if ((op & 0xffc7) == 0x1480) pc += 4; /* add.w #-,sp */ \ + else if ((op & 0xffc7) == 0x58c0) pc += 2; /* add.w #-,sp */ \ + op = read_memory_integer (pc, 2); \ + if ((op & 0xffc7) == 0x2a06) pc += 4; /* ld.w -,ap */ \ + for (;;) { \ + op = read_memory_integer (pc, 2); \ + ix = (op >> 3) & 7; \ + if ((op & 0xfcc0) == 0x2800) { /* ld.- -,ak */ \ + regnum = SP_REGNUM - (op & 7); \ + disp = read_memory_integer (pc + 2, 2); \ + pc += 4;} \ + else if ((op & 0xfcc0) == 0x2840) { /* ld.- -,ak */ \ + regnum = SP_REGNUM - (op & 7); \ + disp = read_memory_integer (pc + 2, 4); \ + pc += 6;} \ + if ((op & 0xfcc0) == 0x3000) { /* ld.- -,sk */ \ + regnum = S0_REGNUM - (op & 7); \ + disp = read_memory_integer (pc + 2, 2); \ + pc += 4;} \ + else if ((op & 0xfcc0) == 0x3040) { /* ld.- -,sk */ \ + regnum = S0_REGNUM - (op & 7); \ + disp = read_memory_integer (pc + 2, 4); \ + pc += 6;} \ + else if ((op & 0xff00) == 0x7100) { /* br crossjump */ \ + pc += 2 * (char) op; \ + continue;} \ + else if (op == 0x0140) { /* jmp crossjump */ \ + pc = read_memory_integer (pc + 2, 4); \ + continue;} \ + else break; \ + if ((frame_saved_regs).regs[regnum]) \ + break; \ + if (ix == 7) disp += frame_fp; \ + else if (ix == 6) disp += read_memory_integer (frame_fp + 12, 4); \ + else if (ix != 0) break; \ + (frame_saved_regs).regs[regnum] = \ + disp - 8 + (1 << ((op >> 8) & 3)); \ + if (regnum >= S7_REGNUM) \ + (frame_saved_regs).regs[regnum - S0_REGNUM + s0_REGNUM] = \ + disp - 4 + (1 << ((op >> 8) & 3)); \ + } \ + } \ +} + +/* Things needed for making the inferior call functions. */ + +#define CALL_DUMMY_LOCATION BEFORE_TEXT_END + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM); \ + register int regnum; \ + char buf[8]; \ + long word; \ + for (regnum = S0_REGNUM; regnum >= S7_REGNUM; --regnum) { \ + read_register_bytes (REGISTER_BYTE (regnum), buf, 8); \ + sp = push_bytes (sp, buf, 8);} \ + for (regnum = SP_REGNUM; regnum >= FP_REGNUM; --regnum) { \ + word = read_register (regnum); \ + sp = push_bytes (sp, &word, 4);} \ + word = (read_register (PS_REGNUM) &~ (3<<25)) | (1<<25); \ + sp = push_bytes (sp, &word, 4); \ + word = read_register (PC_REGNUM); \ + sp = push_bytes (sp, &word, 4); \ + write_register (SP_REGNUM, sp); \ + write_register (FP_REGNUM, sp); \ + write_register (AP_REGNUM, sp);} + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME do {\ + register CORE_ADDR fp = read_register (FP_REGNUM); \ + register int regnum; \ + register int frame_length = /* 3 short, 2 long, 1 extended, 0 context */ \ + (read_memory_integer (fp + 4, 4) >> 25) & 3; \ + char buf[8]; \ + write_register (PC_REGNUM, read_memory_integer (fp, 4)); \ + write_register (PS_REGNUM, read_memory_integer (fp += 4, 4)); \ + write_register (FP_REGNUM, read_memory_integer (fp += 4, 4)); \ + write_register (AP_REGNUM, read_memory_integer (fp += 4, 4)); \ + if (frame_length < 3) \ + for (regnum = A5_REGNUM; regnum < SP_REGNUM; ++regnum) \ + write_register (regnum, read_memory_integer (fp += 4, 4)); \ + if (frame_length < 2) \ + write_register (SP_REGNUM, read_memory_integer (fp += 4, 4)); \ + fp -= 4; \ + if (frame_length < 3) \ + for (regnum = S7_REGNUM; regnum < S0_REGNUM; ++regnum) { \ + read_memory (fp += 8, buf, 8); \ + write_register_bytes (REGISTER_BYTE (regnum), buf, 8);} \ + if (frame_length < 2) { \ + read_memory (fp += 8, buf, 8); \ + write_register_bytes (REGISTER_BYTE (regnum), buf, 8);} \ + else write_register (SP_REGNUM, fp + 8); \ + flush_cached_frames (); \ +} while (0) + +/* This sequence of words is the instructions + mov sp,ap + pshea 69696969 + calls 32323232 + bkpt + Note this is 16 bytes. */ + +#define CALL_DUMMY {0x50860d4069696969LL,0x2140323232327d50LL} + +#define CALL_DUMMY_LENGTH 16 + +#define CALL_DUMMY_START_OFFSET 0 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ *(int *)((char *) dummyname + 4) = nargs; \ + *(int *)((char *) dummyname + 10) = fun; } + +/* Defs to read soff symbol tables, see dbxread.c */ + +#define NUMBER_OF_SYMBOLS ((long) opthdr.o_nsyms) +#define STRING_TABLE_OFFSET ((long) filehdr.h_strptr) +#define SYMBOL_TABLE_OFFSET ((long) opthdr.o_symptr) +#define STRING_TABLE_SIZE ((long) filehdr.h_strsiz) +#define SIZE_OF_TEXT_SEGMENT ((long) txthdr.s_size) +#define ENTRY_POINT ((long) opthdr.o_entry) + +#define READ_STRING_TABLE_SIZE(BUFFER) \ + (BUFFER = STRING_TABLE_SIZE) + +#define DECLARE_FILE_HEADERS \ + FILEHDR filehdr; \ + OPTHDR opthdr; \ + SCNHDR txthdr + +#define READ_FILE_HEADERS(DESC,NAME) \ +{ \ + int n; \ + val = myread (DESC, &filehdr, sizeof filehdr); \ + if (val < 0) \ + perror_with_name (NAME); \ + if (! IS_SOFF_MAGIC (filehdr.h_magic)) \ + error ("%s: not an executable file.", NAME); \ + lseek (DESC, 0L, 0); \ + if (myread (DESC, &filehdr, sizeof filehdr) < 0) \ + perror_with_name (NAME); \ + if (myread (DESC, &opthdr, filehdr.h_opthdr) <= 0) \ + perror_with_name (NAME); \ + for (n = 0; n < filehdr.h_nscns; n++) \ + { \ + if (myread (DESC, &txthdr, sizeof txthdr) < 0) \ + perror_with_name (NAME); \ + if ((txthdr.s_flags & S_TYPMASK) == S_TEXT) \ + break; \ + } \ +} diff --git a/gdb/config/convex/xm-convex.h b/gdb/config/convex/xm-convex.h new file mode 100644 index 0000000..cfcee4e --- /dev/null +++ b/gdb/config/convex/xm-convex.h @@ -0,0 +1,35 @@ +/* Definitions to make GDB run on Convex Unix (4bsd) + Copyright 1989, 1991, 1992, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#define ATTACH_DETACH +#define HAVE_WAIT_STRUCT +#define NO_SIGINTERRUPT + +/* Use SIGCONT rather than SIGTSTP because convex Unix occasionally + turkeys SIGTSTP. I think. */ + +#define STOP_SIGNAL SIGCONT + +/* Hook to call after creating inferior process. Now init_trace_fun + is in the same place. So re-write this to use the init_trace_fun + (making convex a debugging target). FIXME. */ + +#define CREATE_INFERIOR_HOOK create_inferior_hook diff --git a/gdb/config/d10v/d10v.mt b/gdb/config/d10v/d10v.mt new file mode 100644 index 0000000..eddb1b3 --- /dev/null +++ b/gdb/config/d10v/d10v.mt @@ -0,0 +1,5 @@ +# Target: Mitsubishi D10V processor +TDEPFILES= d10v-tdep.o remote-d10v.o +TM_FILE= tm-d10v.h +SIM_OBS= remote-sim.o +SIM= ../sim/d10v/libsim.a diff --git a/gdb/config/d10v/tm-d10v.h b/gdb/config/d10v/tm-d10v.h new file mode 100644 index 0000000..ef75bc5 --- /dev/null +++ b/gdb/config/d10v/tm-d10v.h @@ -0,0 +1,337 @@ +/* Target-specific definition for the Mitsubishi D10V + Copyright (C) 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Contributed by Martin Hunt, hunt@cygnus.com */ + +#define GDB_TARGET_IS_D10V + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* these are the addresses the D10V-EVA board maps data */ +/* and instruction memory to. */ + +#define DMEM_START 0x0000000 +#define IMEM_START 0x1000000 +#define STACK_START 0x0007ffe + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR d10v_skip_prologue (); +#define SKIP_PROLOGUE(ip) \ + {(ip) = d10v_skip_prologue(ip);} + + +/* Stack grows downward. */ +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* for a breakpoint, use "dbt || nop" */ +#define BREAKPOINT {0x2f, 0x90, 0x5e, 0x00} + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ +#define DECR_PC_AFTER_BREAK 4 + +#define REGISTER_NAMES \ +{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10","r11","r12", "r13", "r14","r15",\ + "psw","bpsw","pc","bpc", "cr4", "cr5", "cr6", "rpt_c",\ + "rpt_s","rpt_e", "mod_s", "mod_e", "cr12", "cr13", "iba", "cr15",\ + "imap0","imap1","dmap","a0", "a1"\ + } + +#define NUM_REGS 37 + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define R0_REGNUM 0 +#define LR_REGNUM 13 +#define SP_REGNUM 15 +#define FP_REGNUM 11 +#define PC_REGNUM 18 +#define PSW_REGNUM 16 +#define IMAP0_REGNUM 32 +#define IMAP1_REGNUM 33 +#define DMAP_REGNUM 34 +#define A0_REGNUM 35 + +/* Say how much memory is needed to store a copy of the register set */ +#define REGISTER_BYTES ((NUM_REGS-2)*2+16) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) \ +( ((N) > A0_REGNUM) ? ( ((N)-A0_REGNUM)*8 + A0_REGNUM*2 ) : ((N) * 2) ) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : 2 ) + +/* Number of bytes of storage in the program's representation + for register N. */ +#define REGISTER_VIRTUAL_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : ( ((N) == PC_REGNUM || (N) == SP_REGNUM) ? 4 : 2 )) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ +( ((N) < A0_REGNUM ) ? ((N) == PC_REGNUM || (N) == SP_REGNUM ? builtin_type_long : builtin_type_short) : builtin_type_long_long) + + +/* convert $pc and $sp to/from virtual addresses */ +#define REGISTER_CONVERTIBLE(N) ((N) == PC_REGNUM || (N) == SP_REGNUM) +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + ULONGEST x = extract_unsigned_integer ((FROM), REGISTER_RAW_SIZE (REGNUM)); \ + if (REGNUM == PC_REGNUM) x = (x << 2) | IMEM_START; \ + else x |= DMEM_START; \ + store_unsigned_integer ((TO), TYPE_LENGTH(TYPE), x); \ +} +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + ULONGEST x = extract_unsigned_integer ((FROM), TYPE_LENGTH(TYPE)); \ + x &= 0x3ffff; \ + if (REGNUM == PC_REGNUM) x >>= 2; \ + store_unsigned_integer ((TO), 2, x); \ +} + +#define D10V_MAKE_DADDR(x) ((x) | DMEM_START) +#define D10V_MAKE_IADDR(x) (((x) << 2) | IMEM_START) + +#define D10V_DADDR_P(X) (((X) & 0x3000000) == DMEM_START) +#define D10V_IADDR_P(X) (((X) & 0x3000000) == IMEM_START) + +#define D10V_CONVERT_IADDR_TO_RAW(X) (((X) >> 2) & 0xffff) +#define D10V_CONVERT_DADDR_TO_RAW(X) ((X) & 0xffff) + +#define ARG1_REGNUM R0_REGNUM +#define ARGN_REGNUM 3 +#define RET1_REGNUM R0_REGNUM + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + We store structs through a pointer passed in the first Argument + register. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (ARG1_REGNUM, (ADDR)); } + + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + Things always get returned in RET1_REGNUM, RET2_REGNUM, ... */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE(RET1_REGNUM), VALBUF, TYPE_LENGTH (TYPE)) + + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (extract_address ((REGBUF) + REGISTER_BYTE (ARG1_REGNUM), REGISTER_RAW_SIZE (ARG1_REGNUM)) | DMEM_START) + +/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of + EXTRACT_RETURN_VALUE? GCC_P is true if compiled with gcc + and TYPE is the type (which is known to be struct, union or array). + + The d10v returns anything less than 8 bytes in size in + registers. */ + +extern use_struct_convention_fn d10v_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) d10v_use_struct_convention (gcc_p, type) + + + +/* Define other aspects of the stack frame. + we keep a copy of the worked out return pc lying around, since it + is a useful bit of info */ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR return_pc; \ + int frameless; \ + int size; + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + d10v_init_extra_frame_info(fromleaf, fi) + +extern void d10v_init_extra_frame_info PARAMS (( int fromleaf, struct frame_info *fi )); + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#define FRAME_CHAIN(FRAME) d10v_frame_chain(FRAME) +extern int d10v_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) d10v_frame_chain_valid (chain, thisframe) +#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc) +#define FRAME_ARGS_ADDRESS(fi) (fi)->frame +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +/* Immediately after a function call, return the saved pc. We can't */ +/* use frame->return_pc beause that is determined by reading R13 off the */ +/*stack and that may not be written yet. */ + +#define SAVED_PC_AFTER_CALL(frame) ((read_register(LR_REGNUM) << 2) | IMEM_START) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + d10v_frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +extern void d10v_frame_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *)); + +#define NAMES_HAVE_UNDERSCORE + + +/* DUMMY FRAMES. Need these to support inferior function calls. They + work like this on D10V: First we set a breakpoint at 0 or __start. + Then we push all the registers onto the stack. Then put the + function arguments in the proper registers and set r13 to our + breakpoint address. Finally, the PC is set to the start of the + function being called (no JSR/BSR insn). When it hits the + breakpoint, clear the break point and pop the old register contents + off the stack. */ + +extern void d10v_pop_frame PARAMS ((struct frame_info *frame)); +#define POP_FRAME generic_pop_current_frame (d10v_pop_frame) + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_ADDRESS() entry_point_address () +extern CORE_ADDR d10v_push_return_address PARAMS ((CORE_ADDR pc, CORE_ADDR sp)); +#define PUSH_RETURN_ADDRESS(PC, SP) d10v_push_return_address (PC, SP) + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) +/* #define PC_IN_CALL_DUMMY(pc, sp, frame_address) ( pc == IMEM_START + 4 ) */ + +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +/* override the default get_saved_register function with one that + takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER +#define get_saved_register generic_get_saved_register + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = d10v_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR d10v_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); + + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ +d10v_extract_return_value(TYPE, REGBUF, VALBUF) + extern void +d10v_extract_return_value PARAMS ((struct type *, char *, char *)); + + +#define REGISTER_SIZE 2 + +#ifdef CC_HAS_LONG_LONG +# define LONGEST long long +#else +# define LONGEST long +#endif +#define ULONGEST unsigned LONGEST + +void d10v_write_pc PARAMS ((CORE_ADDR val, int pid)); +CORE_ADDR d10v_read_pc PARAMS ((int pid)); +void d10v_write_sp PARAMS ((CORE_ADDR val)); +CORE_ADDR d10v_read_sp PARAMS ((void)); +void d10v_write_fp PARAMS ((CORE_ADDR val)); +CORE_ADDR d10v_read_fp PARAMS ((void)); + +#define TARGET_READ_PC(pid) d10v_read_pc (pid) +#define TARGET_WRITE_PC(val,pid) d10v_write_pc (val, pid) +#define TARGET_READ_FP() d10v_read_fp () +#define TARGET_WRITE_FP(val) d10v_write_fp (val) +#define TARGET_READ_SP() d10v_read_sp () +#define TARGET_WRITE_SP(val) d10v_write_sp (val) + +/* Number of bits in the appropriate type */ +#define TARGET_INT_BIT (2 * TARGET_CHAR_BIT) +#define TARGET_PTR_BIT (4 * TARGET_CHAR_BIT) +#define TARGET_DOUBLE_BIT (4 * TARGET_CHAR_BIT) +#define TARGET_LONG_DOUBLE_BIT (8 * TARGET_CHAR_BIT) + + +/* For the d10v when talking to the remote d10v board, GDB addresses + need to be translated into a format that the d10v rom monitor + understands. */ + +int remote_d10v_translate_xfer_address PARAMS ((CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr)); +#define REMOTE_TRANSLATE_XFER_ADDRESS(GDB_ADDR, GDB_LEN, REM_ADDR, REM_LEN) \ +(REM_LEN) = remote_d10v_translate_xfer_address ((GDB_ADDR), (GDB_LEN), &(REM_ADDR)) + diff --git a/gdb/config/d30v/d30v.mt b/gdb/config/d30v/d30v.mt new file mode 100644 index 0000000..da0af2f --- /dev/null +++ b/gdb/config/d30v/d30v.mt @@ -0,0 +1,5 @@ +# Target: Mitsubishi D30V processor +TDEPFILES= d30v-tdep.o +TM_FILE= tm-d30v.h +SIM_OBS= remote-sim.o +SIM= ../sim/d30v/libsim.a diff --git a/gdb/config/d30v/tm-d30v.h b/gdb/config/d30v/tm-d30v.h new file mode 100644 index 0000000..7a69ca3 --- /dev/null +++ b/gdb/config/d30v/tm-d30v.h @@ -0,0 +1,325 @@ +/* Target-specific definition for the Mitsubishi D30V + Copyright (C) 1997 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_D30V_H +#define TM_D30V_H + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* these are the addresses the D30V-EVA board maps data */ +/* and instruction memory to. */ + +#define DMEM_START 0x20000000 +#define IMEM_START 0x00000000 /* was 0x10000000 */ +#define STACK_START 0x20007ffe + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR d30v_skip_prologue (); +#define SKIP_PROLOGUE(ip) \ + {(ip) = d30v_skip_prologue(ip);} + + +/* Stack grows downward. */ +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* for a breakpoint, use "dbt || nop" */ +#define BREAKPOINT {0x00, 0xb0, 0x00, 0x00,\ + 0x00, 0xf0, 0x00, 0x00} + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ +#define DECR_PC_AFTER_BREAK 0 + +#define REGISTER_NAMES \ +{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \ + "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", \ + "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47", \ + "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55", \ + "r56", "r57", "r58", "r59", "r60", "r61", "r62", "r63", \ + "spi", "spu", \ + "psw", "bpsw", "pc", "bpc", "dpsw", "dpc", "cr6", "rpt_c", \ + "rpt_s", "rpt_e", "mod_s", "mod_e", "cr12", "cr13", "iba", "eit_vb",\ + "int_s", "int_m", "a0", "a1" \ + } + +#define NUM_REGS 86 + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define R0_REGNUM 0 +#define FP_REGNUM 61 +#define LR_REGNUM 62 +#define SP_REGNUM 63 +#define SPI_REGNUM 64 /* Interrupt stack pointer */ +#define SPU_REGNUM 65 /* User stack pointer */ +#define CREGS_START 66 + +#define PSW_REGNUM (CREGS_START + 0) /* psw, bpsw, or dpsw??? */ +#define PSW_SM (((unsigned long)0x80000000) >> 0) /* Stack mode: 0/SPI */ + /* 1/SPU */ +#define PSW_EA (((unsigned long)0x80000000) >> 2) /* Execution status */ +#define PSW_DB (((unsigned long)0x80000000) >> 3) /* Debug mode */ +#define PSW_DS (((unsigned long)0x80000000) >> 4) /* Debug EIT status */ +#define PSW_IE (((unsigned long)0x80000000) >> 5) /* Interrupt enable */ +#define PSW_RP (((unsigned long)0x80000000) >> 6) /* Repeat enable */ +#define PSW_MD (((unsigned long)0x80000000) >> 7) /* Modulo enable */ +#define PSW_F0 (((unsigned long)0x80000000) >> 17) /* F0 flag */ +#define PSW_F1 (((unsigned long)0x80000000) >> 19) /* F1 flag */ +#define PSW_F2 (((unsigned long)0x80000000) >> 21) /* F2 flag */ +#define PSW_F3 (((unsigned long)0x80000000) >> 23) /* F3 flag */ +#define PSW_S (((unsigned long)0x80000000) >> 25) /* Saturation flag */ +#define PSW_V (((unsigned long)0x80000000) >> 27) /* Overflow flag */ +#define PSW_VA (((unsigned long)0x80000000) >> 29) /* Accum. overflow */ +#define PSW_C (((unsigned long)0x80000000) >> 31) /* Carry/Borrow flag */ + +#define BPSW_REGNUM (CREGS_START + 1) /* Backup PSW (on interrupt) */ +#define PC_REGNUM (CREGS_START + 2) /* pc, bpc, or dpc??? */ +#define BPC_REGNUM (CREGS_START + 3) /* Backup PC (on interrupt) */ +#define DPSW_REGNUM (CREGS_START + 4) /* Backup PSW (on debug trap) */ +#define DPC_REGNUM (CREGS_START + 5) /* Backup PC (on debug trap) */ +#define RPT_C_REGNUM (CREGS_START + 7) /* Loop count */ +#define RPT_S_REGNUM (CREGS_START + 8) /* Loop start address*/ +#define RPT_E_REGNUM (CREGS_START + 9) /* Loop end address */ +#define MOD_S_REGNUM (CREGS_START + 10) +#define MOD_E_REGNUM (CREGS_START + 11) +#define IBA_REGNUM (CREGS_START + 14) /* Instruction break address */ +#define EIT_VB_REGNUM (CREGS_START + 15) /* Vector base address */ +#define INT_S_REGNUM (CREGS_START + 16) /* Interrupt status */ +#define INT_M_REGNUM (CREGS_START + 17) /* Interrupt mask */ +#define A0_REGNUM 84 +#define A1_REGNUM 85 + +/* Say how much memory is needed to store a copy of the register set */ +#define REGISTER_BYTES ((NUM_REGS - 2) * 4 + 2 * 8) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) \ +( ((N) >= A0_REGNUM) ? ( ((N) - A0_REGNUM) * 8 + A0_REGNUM * 4 ) : ((N) * 4) ) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : 4 ) + +/* Number of bytes of storage in the program's representation + for register N. */ +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ +( ((N) < A0_REGNUM ) ? builtin_type_long : builtin_type_long_long) + +/* Writing to r0 is a noop (not an error or exception or anything like + that, however). */ + +#define CANNOT_STORE_REGISTER(regno) ((regno) == R0_REGNUM) + +void d30v_do_registers_info PARAMS ((int regnum, int fpregs)); + +#define DO_REGISTERS_INFO d30v_do_registers_info + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + We store structs through a pointer passed in R2 */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (2, (ADDR)); } + + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + Things always get returned in R2/R3 */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE(2), VALBUF, TYPE_LENGTH (TYPE)) + + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (((CORE_ADDR *)(REGBUF))[2]) + + +/* Define other aspects of the stack frame. + we keep a copy of the worked out return pc lying around, since it + is a useful bit of info */ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR return_pc; \ + CORE_ADDR dummy; \ + int frameless; \ + int size; + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + d30v_init_extra_frame_info(fromleaf, fi) + +extern void d30v_init_extra_frame_info PARAMS (( int fromleaf, struct frame_info *fi )); + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#define FRAME_CHAIN(FRAME) d30v_frame_chain(FRAME) +extern int d30v_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) d30v_frame_chain_valid (chain, thisframe) +#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc) +#define FRAME_ARGS_ADDRESS(fi) (fi)->frame +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +#define INIT_FRAME_PC_FIRST(fromleaf, prev) d30v_init_frame_pc(fromleaf, prev) +#define INIT_FRAME_PC(fromleaf, prev) /* nada */ + +/* Immediately after a function call, return the saved pc. We can't */ +/* use frame->return_pc beause that is determined by reading R62 off the */ +/* stack and that may not be written yet. */ + +#define SAVED_PC_AFTER_CALL(frame) (read_register(LR_REGNUM)) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + d30v_frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +extern void d30v_frame_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *)); + +#define NAMES_HAVE_UNDERSCORE + +/* DUMMY FRAMES. Need these to support inferior function calls. + They work like this on D30V: + First we set a breakpoint at 0 or __start. + Then we push all the registers onto the stack. + Then put the function arguments in the proper registers and set r13 + to our breakpoint address. + Finally call the function directly. + When it hits the breakpoint, clear the break point and pop the old + register contents off the stack. */ + +#define CALL_DUMMY { 0 } +#define PUSH_DUMMY_FRAME +#define CALL_DUMMY_START_OFFSET 0 +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) + +extern CORE_ADDR d30v_call_dummy_address PARAMS ((void)); +#define CALL_DUMMY_ADDRESS() d30v_call_dummy_address() + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +sp = d30v_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p) + +#define PC_IN_CALL_DUMMY(pc, sp, frame_address) ( pc == IMEM_START + 4 ) + +extern CORE_ADDR d30v_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, + int, struct value **, + struct type *, int)); +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = d30v_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR d30v_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); + + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ +d30v_extract_return_value(TYPE, REGBUF, VALBUF) + extern void +d30v_extract_return_value PARAMS ((struct type *, char *, char *)); + + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ +#define POP_FRAME d30v_pop_frame(); +extern void d30v_pop_frame PARAMS((void)); + +#define REGISTER_SIZE 4 + +/* Need to handle SP special, as we need to select between spu and spi. */ +#if 0 /* XXX until the simulator is fixed */ +#define TARGET_READ_SP() ((read_register (PSW_REGNUM) & PSW_SM) \ + ? read_register (SPU_REGNUM) \ + : read_register (SPI_REGNUM)) + +#define TARGET_WRITE_SP(val) ((read_register (PSW_REGNUM) & PSW_SM) \ + ? write_register (SPU_REGNUM, (val)) \ + : write_register (SPI_REGNUM, (val))) +#endif + +#define STACK_ALIGN(len) (((len) + 7 ) & ~7) + +/* Turn this on to cause remote-sim.c to use sim_set/clear_breakpoint. */ + +#define SIM_HAS_BREAKPOINTS + +#endif /* TM_D30V_H */ diff --git a/gdb/config/fr30/fr30.mt b/gdb/config/fr30/fr30.mt new file mode 100644 index 0000000..fac307e --- /dev/null +++ b/gdb/config/fr30/fr30.mt @@ -0,0 +1,5 @@ +# Target: Fujitsu FR30 processor +TDEPFILES= fr30-tdep.o +TM_FILE= tm-fr30.h +SIM_OBS = remote-sim.o +SIM = ../sim/fr30/libsim.a diff --git a/gdb/config/fr30/tm-fr30.h b/gdb/config/fr30/tm-fr30.h new file mode 100644 index 0000000..ea32792 --- /dev/null +++ b/gdb/config/fr30/tm-fr30.h @@ -0,0 +1,232 @@ +/* Parameters for execution on a Fujitsu FR30 processor. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define FR30_GENREGS 16 +#define FR30_DEDICATEDREGS 8 +#define FR30_REGSIZE 4 /* bytes */ + +#define NUM_REGS (FR30_GENREGS + FR30_DEDICATEDREGS) +#define REGISTER_BYTES ((FR30_GENREGS + FR30_DEDICATEDREGS)*FR30_REGSIZE) + +/* Index within `registers' of the first byte of the space for + register N. */ +#define REGISTER_BYTE(N) ((N) * FR30_REGSIZE) + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ +#define REGISTER_NAMES \ +{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", \ + "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + "pc", "ps", "tbr", "rp", "ssp", "usp", "mdh", "mdl" } + +/* Offset from address of function to start of its code. + Zero on most machines. */ +#define FUNCTION_START_OFFSET 0 + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +#define R0_REGNUM 0 +#define R1_REGNUM 1 +#define R2_REGNUM 2 +#define R3_REGNUM 3 +#define R4_REGNUM 4 +#define R5_REGNUM 5 +#define R6_REGNUM 6 +#define R7_REGNUM 7 +#define R8_REGNUM 8 +#define R9_REGNUM 9 +#define R10_REGNUM 10 +#define R11_REGNUM 11 +#define R12_REGNUM 12 +#define R13_REGNUM 13 +#define FP_REGNUM 14 /* Frame pointer */ +#define SP_REGNUM 15 /* Stack pointer */ +#define PC_REGNUM 16 /* Program counter */ +#define RP_REGNUM 19 /* Return pointer */ + +#define FIRST_ARGREG R4_REGNUM /* first arg (or struct ret val addr) */ +#define LAST_ARGREG R7_REGNUM /* fourth (or third arg) */ +#define RETVAL_REG R4_REGNUM /* return vaue */ + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ +#define REGISTER_SIZE FR30_REGSIZE + +/* Number of bytes of storage in the actual machine representation + for register N. */ +#define REGISTER_RAW_SIZE(N) FR30_REGSIZE + +/* Largest value REGISTER_RAW_SIZE can have. */ +#define MAX_REGISTER_RAW_SIZE FR30_REGSIZE + +/* Number of bytes of storage in the program's representation + for register N. */ +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ +#define MAX_REGISTER_VIRTUAL_SIZE FR30_REGSIZE + +extern void fr30_pop_frame PARAMS ((void)); +#define POP_FRAME fr30_pop_frame() + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_ADDRESS() entry_point_address () +#define PUSH_RETURN_ADDRESS(PC, SP) (write_register(RP_REGNUM, CALL_DUMMY_ADDRESS()), SP) +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +/* Number of bytes at start of arglist that are not really args. */ +#define FRAME_ARGS_SKIP 0 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ +#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE(RETVAL_REG) + \ + (TYPE_LENGTH(TYPE) < 4 ? 4 - TYPE_LENGTH(TYPE) : 0), TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (RETVAL_REG), \ + REGISTER_RAW_SIZE (RETVAL_REG)) + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (RETVAL_REG, (ADDR)); } + +#define FRAME_ARGS_ADDRESS(fi) (fi->frame) +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ +#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1) + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs fsr; \ + int framesize; \ + int frameoffset; \ + int framereg; + +extern CORE_ADDR fr30_frame_chain PARAMS ((struct frame_info *fi)); +#define FRAME_CHAIN(fi) fr30_frame_chain (fi) + +extern CORE_ADDR fr30_frame_saved_pc PARAMS ((struct frame_info *)); +#define FRAME_SAVED_PC(fi) (fr30_frame_saved_pc (fi)) + +#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM) + +extern CORE_ADDR fr30_skip_prologue PARAMS ((CORE_ADDR pc)); +#define SKIP_PROLOGUE(pc) pc = fr30_skip_prologue (pc) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ +#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr + +/* Use INT #BREAKPOINT_INTNUM instruction for breakpoint */ +#define FR30_BREAKOP 0x1f /* opcode, type D instruction */ +#define BREAKPOINT_INTNUM 9 /* one of the reserved traps */ +#define BREAKPOINT {FR30_BREAKOP, BREAKPOINT_INTNUM} + +/* Define this for Wingdb */ +#define TARGET_FR30 + +/* IEEE format floating point */ +#define IEEE_FLOAT + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ +{ \ + CORE_ADDR func_start, after_prologue; \ + func_start = (get_pc_function_start ((FI)->pc) + \ + FUNCTION_START_OFFSET); \ + after_prologue = func_start; \ + SKIP_PROLOGUE (after_prologue); \ + (FRAMELESS) = (after_prologue == func_start); \ +} + +extern void fr30_init_extra_frame_info PARAMS ((struct frame_info *fi)); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) fr30_init_extra_frame_info (fi) + +#define FRAME_CHAIN_VALID(FP, FI) generic_frame_chain_valid (FP, FI) + +extern CORE_ADDR +fr30_push_arguments PARAMS ((int nargs, struct value **args, CORE_ADDR sp, + int struct_return, + CORE_ADDR struct_addr)); +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = fr30_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) + +/* Fujitsu's ABI requires all structs to be passed using a pointer. + That is obviously not very efficient, so I am leaving the definitions + to make gdb work with GCC style struct passing, in case we decide + to go for better performance, rather than for compatibility with + Fujitsu (just change STRUCT_ALWAYS_BY_ADDR to 0) */ + +#define STRUCT_ALWAYS_BY_ADDR 1 + +#if(STRUCT_ALWAYS_BY_ADDR) +#define REG_STRUCT_HAS_ADDR(gcc_p,type) 1 +#else +/* more standard GCC (optimized) */ +#define REG_STRUCT_HAS_ADDR(gcc_p,type) \ + ((TYPE_LENGTH(type) > 4) && (TYPE_LENGTH(type) & 0x3)) +#endif +/* alway return struct by value by input pointer */ +#define USE_STRUCT_CONVENTION(GCC_P, TYPE) 1 diff --git a/gdb/config/gould/np1.mh b/gdb/config/gould/np1.mh new file mode 100644 index 0000000..322f207 --- /dev/null +++ b/gdb/config/gould/np1.mh @@ -0,0 +1,3 @@ +# OBSOLETE # Host: Gould NP1 +# OBSOLETE XDEPFILES= infptrace.o inftarg.o fork-child.o gould-xdep.o +# OBSOLETE XM_FILE= xm-np1.h diff --git a/gdb/config/gould/np1.mt b/gdb/config/gould/np1.mt new file mode 100644 index 0000000..4ea2da5 --- /dev/null +++ b/gdb/config/gould/np1.mt @@ -0,0 +1,3 @@ +# OBSOLETE # Target: Gould NP1 +# OBSOLETE TDEPFILES= gould-tdep.o +# OBSOLETE TM_FILE= tm-np1.h diff --git a/gdb/config/gould/pn.mh b/gdb/config/gould/pn.mh new file mode 100644 index 0000000..9d69f90 --- /dev/null +++ b/gdb/config/gould/pn.mh @@ -0,0 +1,3 @@ +# OBSOLETE # Host: Gould Powernode +# OBSOLETE XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o +# OBSOLETE XM_FILE= xm-pn.h diff --git a/gdb/config/gould/pn.mt b/gdb/config/gould/pn.mt new file mode 100644 index 0000000..7f73fc9 --- /dev/null +++ b/gdb/config/gould/pn.mt @@ -0,0 +1,3 @@ +# OBSOLETE # Target: Gould Powernode +# OBSOLETE TDEPFILES= gould-tdep.o +# OBSOLETE TM_FILE= tm-pn.h diff --git a/gdb/config/gould/tm-np1.h b/gdb/config/gould/tm-np1.h new file mode 100644 index 0000000..7287155 --- /dev/null +++ b/gdb/config/gould/tm-np1.h @@ -0,0 +1,490 @@ +/* OBSOLETE /* Parameters for targeting on a Gould NP1, for GDB, the GNU debugger. */ +/* OBSOLETE Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. */ +/* OBSOLETE */ +/* OBSOLETE This file is part of GDB. */ +/* OBSOLETE */ +/* OBSOLETE This program is free software; you can redistribute it and/or modify */ +/* OBSOLETE it under the terms of the GNU General Public License as published by */ +/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */ +/* OBSOLETE (at your option) any later version. */ +/* OBSOLETE */ +/* OBSOLETE This program is distributed in the hope that it will be useful, */ +/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */ +/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ +/* OBSOLETE GNU General Public License for more details. */ +/* OBSOLETE */ +/* OBSOLETE You should have received a copy of the GNU General Public License */ +/* OBSOLETE along with this program; if not, write to the Free Software */ +/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define GOULD_NPL */ +/* OBSOLETE */ +/* OBSOLETE #define TARGET_BYTE_ORDER BIG_ENDIAN */ +/* OBSOLETE */ +/* OBSOLETE /* N_ENTRY appears in libraries on Gould machines. */ +/* OBSOLETE Don't know what 0xa4 is; it's mentioned in stab.h */ +/* OBSOLETE but only in the sdb symbol list. *x/ */ +/* OBSOLETE #define IGNORE_SYMBOL(type) (type == N_ENTRY || type == 0xa4) */ +/* OBSOLETE */ +/* OBSOLETE /* We don't want the extra gnu symbols on the machine; */ +/* OBSOLETE they will interfere with the shared segment symbols. *x/ */ +/* OBSOLETE #define NO_GNU_STABS */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for text-offset and data info (in NPL a.out format). *x/ */ +/* OBSOLETE #define TEXTINFO \ */ +/* OBSOLETE text_offset = N_TXTOFF (exec_coffhdr, exec_aouthdr); \ */ +/* OBSOLETE exec_data_offset = N_TXTOFF (exec_coffhdr, exec_aouthdr)\ */ +/* OBSOLETE + exec_aouthdr.a_text */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for number of symbol table entries *x/ */ +/* OBSOLETE #define NUMBER_OF_SYMBOLS \ */ +/* OBSOLETE (coffhdr.f_nsyms) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for file-offset of symbol table (in NPL a.out format). *x/ */ +/* OBSOLETE #define SYMBOL_TABLE_OFFSET \ */ +/* OBSOLETE N_SYMOFF (coffhdr) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for file-offset of string table (in NPL a.out format). *x/ */ +/* OBSOLETE #define STRING_TABLE_OFFSET \ */ +/* OBSOLETE (N_STROFF (coffhdr)) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to store the length of the string table data in INTO. *x/ */ +/* OBSOLETE #define READ_STRING_TABLE_SIZE(INTO) \ */ +/* OBSOLETE { INTO = hdr.a_stsize; } */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to declare variables to hold the file's header data. *x/ */ +/* OBSOLETE #define DECLARE_FILE_HEADERS struct exec hdr; \ */ +/* OBSOLETE FILHDR coffhdr */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to read the header data from descriptor DESC and validate it. */ +/* OBSOLETE NAME is the file name, for error messages. *x/ */ +/* OBSOLETE #define READ_FILE_HEADERS(DESC, NAME) \ */ +/* OBSOLETE { val = myread (DESC, &coffhdr, sizeof coffhdr); \ */ +/* OBSOLETE if (val < 0) \ */ +/* OBSOLETE perror_with_name (NAME); \ */ +/* OBSOLETE val = myread (DESC, &hdr, sizeof hdr); \ */ +/* OBSOLETE if (val < 0) \ */ +/* OBSOLETE perror_with_name (NAME); \ */ +/* OBSOLETE if (coffhdr.f_magic != GNP1MAGIC) \ */ +/* OBSOLETE error ("File \"%s\" not in coff executable format.", NAME); \ */ +/* OBSOLETE if (N_BADMAG (hdr)) \ */ +/* OBSOLETE error ("File \"%s\" not in executable format.", NAME); } */ +/* OBSOLETE */ +/* OBSOLETE /* Define COFF and other symbolic names needed on NP1 *x/ */ +/* OBSOLETE #define NS32GMAGIC GNP1MAGIC */ +/* OBSOLETE #define NS32SMAGIC GPNMAGIC */ +/* OBSOLETE */ +/* OBSOLETE /* Address of blocks in N_LBRAC and N_RBRAC symbols are absolute addresses, */ +/* OBSOLETE not relative to start of source address. *x/ */ +/* OBSOLETE #define BLOCK_ADDRESS_ABSOLUTE */ +/* OBSOLETE */ +/* OBSOLETE /* Offset from address of function to start of its code. */ +/* OBSOLETE Zero on most machines. *x/ */ +/* OBSOLETE #define FUNCTION_START_OFFSET 8 */ +/* OBSOLETE */ +/* OBSOLETE /* Advance PC across any function entry prologue instructions */ +/* OBSOLETE to reach some "real" code. One NPL we can have one two startup */ +/* OBSOLETE sequences depending on the size of the local stack: */ +/* OBSOLETE */ +/* OBSOLETE Either: */ +/* OBSOLETE "suabr b2, #" */ +/* OBSOLETE of */ +/* OBSOLETE "lil r4, #", "suabr b2, #(r4)" */ +/* OBSOLETE */ +/* OBSOLETE "lwbr b6, #", "stw r1, 8(b2)" */ +/* OBSOLETE Optional "stwbr b3, c(b2)" */ +/* OBSOLETE Optional "trr r2,r7" (Gould first argument register passing) */ +/* OBSOLETE or */ +/* OBSOLETE Optional "stw r2,8(b3)" (Gould first argument register passing) */ +/* OBSOLETE *x/ */ +/* OBSOLETE #define SKIP_PROLOGUE(pc) { \ */ +/* OBSOLETE register int op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0xFA0B0000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x59400000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x5F000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xD4820008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0x5582000C) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xd5030008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x59000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x5F000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xD4820008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0x5582000C) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xd5030008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Immediately after a function call, return the saved pc. */ +/* OBSOLETE Can't go through the frames for this because on some machines */ +/* OBSOLETE the new frame is not set up until the new function executes */ +/* OBSOLETE some instructions. True on NPL! Return address is in R1. */ +/* OBSOLETE The true return address is REALLY 4 past that location! *x/ */ +/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) \ */ +/* OBSOLETE (read_register(R1_REGNUM) + 4) */ +/* OBSOLETE */ +/* OBSOLETE /* Address of end of stack space. *x/ */ +/* OBSOLETE #define STACK_END_ADDR 0x7fffc000 */ +/* OBSOLETE */ +/* OBSOLETE /* Stack grows downward. *x/ */ +/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */ +/* OBSOLETE */ +/* OBSOLETE /* Sequence of bytes for breakpoint instruction. */ +/* OBSOLETE This is padded out to the size of a machine word. When it was just */ +/* OBSOLETE {0x28, 0x09} it gave problems if hit breakpoint on returning from a */ +/* OBSOLETE function call. *x/ */ +/* OBSOLETE #define BREAKPOINT {0x28, 0x09, 0x0, 0x0} */ +/* OBSOLETE */ +/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */ +/* OBSOLETE This is often the number of bytes in BREAKPOINT */ +/* OBSOLETE but not always. *x/ */ +/* OBSOLETE #define DECR_PC_AFTER_BREAK 2 */ +/* OBSOLETE */ +/* OBSOLETE /* Return 1 if P points to an invalid floating point value. *x/ */ +/* OBSOLETE #define INVALID_FLOAT(p, len) ((*(short *)p & 0xff80) == 0x8000) */ +/* OBSOLETE */ +/* OBSOLETE /* Say how long (ordinary) registers are. This is a piece of bogosity */ +/* OBSOLETE used in push_word and a few other places; REGISTER_RAW_SIZE is the */ +/* OBSOLETE real way to know how big a register is. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define REGISTER_SIZE 4 */ +/* OBSOLETE */ +/* OBSOLETE /* Size of bytes of vector register (NP1 only), 32 elements * sizeof(int) *x/ */ +/* OBSOLETE #define VR_SIZE 128 */ +/* OBSOLETE */ +/* OBSOLETE /* Number of machine registers *x/ */ +/* OBSOLETE #define NUM_REGS 27 */ +/* OBSOLETE #define NUM_GEN_REGS 16 */ +/* OBSOLETE #define NUM_CPU_REGS 4 */ +/* OBSOLETE #define NUM_VECTOR_REGS 7 */ +/* OBSOLETE */ +/* OBSOLETE /* Initializer for an array of names of registers. */ +/* OBSOLETE There should be NUM_REGS strings in this initializer. *x/ */ +/* OBSOLETE #define REGISTER_NAMES { \ */ +/* OBSOLETE "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ */ +/* OBSOLETE "b0", "b1", "b2", "b3", "b4", "b5", "b6", "b7", \ */ +/* OBSOLETE "sp", "ps", "pc", "ve", \ */ +/* OBSOLETE "v1", "v2", "v3", "v4", "v5", "v6", "v7", \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Register numbers of various important registers. */ +/* OBSOLETE Note that some of these values are "real" register numbers, */ +/* OBSOLETE and correspond to the general registers of the machine, */ +/* OBSOLETE and some are "phony" register numbers which are too large */ +/* OBSOLETE to be actual register numbers as far as the user is concerned */ +/* OBSOLETE but do serve to get the desired values when passed to read_register. *x/ */ +/* OBSOLETE #define R1_REGNUM 1 /* Gr1 => return address of caller *x/ */ +/* OBSOLETE #define R2_REGNUM 2 /* Gr2 => return value from function *x/ */ +/* OBSOLETE #define R4_REGNUM 4 /* Gr4 => register save area *x/ */ +/* OBSOLETE #define R5_REGNUM 5 /* Gr5 => register save area *x/ */ +/* OBSOLETE #define R6_REGNUM 6 /* Gr6 => register save area *x/ */ +/* OBSOLETE #define R7_REGNUM 7 /* Gr7 => register save area *x/ */ +/* OBSOLETE #define B1_REGNUM 9 /* Br1 => start of this code routine *x/ */ +/* OBSOLETE #define SP_REGNUM 10 /* Br2 == (sp) *x/ */ +/* OBSOLETE #define AP_REGNUM 11 /* Br3 == (ap) *x/ */ +/* OBSOLETE #define FP_REGNUM 16 /* A copy of Br2 saved in trap *x/ */ +/* OBSOLETE #define PS_REGNUM 17 /* Contains processor status *x/ */ +/* OBSOLETE #define PC_REGNUM 18 /* Contains program counter *x/ */ +/* OBSOLETE #define VE_REGNUM 19 /* Vector end (user setup) register *x/ */ +/* OBSOLETE #define V1_REGNUM 20 /* First vector register *x/ */ +/* OBSOLETE #define V7_REGNUM 26 /* First vector register *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */ +/* OBSOLETE register state, the array `registers'. *x/ */ +/* OBSOLETE #define REGISTER_BYTES \ */ +/* OBSOLETE (NUM_GEN_REGS*4 + NUM_VECTOR_REGS*VR_SIZE + NUM_CPU_REGS*4) */ +/* OBSOLETE */ +/* OBSOLETE /* Index within `registers' of the first byte of the space for */ +/* OBSOLETE register N. *x/ */ +/* OBSOLETE #define REGISTER_BYTE(N) \ */ +/* OBSOLETE (((N) < V1_REGNUM) ? ((N) * 4) : (((N) - V1_REGNUM) * VR_SIZE) + 80) */ +/* OBSOLETE */ +/* OBSOLETE /* Number of bytes of storage in the actual machine representation */ +/* OBSOLETE for register N. On the NP1, all normal regs are 4 bytes, but */ +/* OBSOLETE the vector registers are VR_SIZE*4 bytes long. *x/ */ +/* OBSOLETE #define REGISTER_RAW_SIZE(N) \ */ +/* OBSOLETE (((N) < V1_REGNUM) ? 4 : VR_SIZE) */ +/* OBSOLETE */ +/* OBSOLETE /* Number of bytes of storage in the program's representation */ +/* OBSOLETE for register N. On the NP1, all regs are 4 bytes. *x/ */ +/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N) \ */ +/* OBSOLETE (((N) < V1_REGNUM) ? 4 : VR_SIZE) */ +/* OBSOLETE */ +/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have. *x/ */ +/* OBSOLETE #define MAX_REGISTER_RAW_SIZE VR_SIZE */ +/* OBSOLETE */ +/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have. *x/ */ +/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE VR_SIZE */ +/* OBSOLETE */ +/* OBSOLETE /* Return the GDB type object for the "standard" data type */ +/* OBSOLETE of data in register N. *x/ */ +/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N) \ */ +/* OBSOLETE ((N) > VE_REGNUM ? builtin_type_np1_vector : builtin_type_int) */ +/* OBSOLETE extern struct type *builtin_type_np1_vector; */ +/* OBSOLETE */ +/* OBSOLETE /* Store the address of the place in which to copy the structure the */ +/* OBSOLETE subroutine will return. This is called from call_function. */ +/* OBSOLETE */ +/* OBSOLETE On this machine this is a no-op, because gcc isn't used on it */ +/* OBSOLETE yet. So this calling convention is not used. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) push_word(SP + 8, ADDR) */ +/* OBSOLETE */ +/* OBSOLETE /* Extract from an arrary REGBUF containing the (raw) register state */ +/* OBSOLETE a function return value of type TYPE, and copy that, in virtual format, */ +/* OBSOLETE into VALBUF. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */ +/* OBSOLETE memcpy (VALBUF, ((int *)(REGBUF)) + 2, TYPE_LENGTH (TYPE)) */ +/* OBSOLETE */ +/* OBSOLETE /* Write into appropriate registers a function return value */ +/* OBSOLETE of type TYPE, given in virtual format. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */ +/* OBSOLETE write_register_bytes (REGISTER_BYTE (R2_REGNUM), VALBUF, \ */ +/* OBSOLETE TYPE_LENGTH (TYPE)) */ +/* OBSOLETE */ +/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */ +/* OBSOLETE the address in which a function should return its structure value, */ +/* OBSOLETE as a CORE_ADDR (or an expression that can be used as one). *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*((int *)(REGBUF) + 2)) */ +/* OBSOLETE */ +/* OBSOLETE /* Both gcc and cc return small structs in registers (i.e. in GDB */ +/* OBSOLETE terminology, small structs don't use the struct return convention). *x/ */ +/* OBSOLETE extern use_struct_convention_fn gould_use_struct_convention; */ +/* OBSOLETE #define USE_STRUCT_CONVENTION(gcc_p, type) gould_use_struct_convention (gcc_p, type) */ +/* OBSOLETE */ +/* OBSOLETE /* Describe the pointer in each stack frame to the previous stack frame */ +/* OBSOLETE (its caller). *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* FRAME_CHAIN takes a frame's nominal address */ +/* OBSOLETE and produces the frame's chain-pointer. */ +/* OBSOLETE */ +/* OBSOLETE However, if FRAME_CHAIN_VALID returns zero, */ +/* OBSOLETE it means the given frame is the outermost one and has no caller. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* In the case of the NPL, the frame's norminal address is Br2 and the */ +/* OBSOLETE previous routines frame is up the stack X bytes, where X is the */ +/* OBSOLETE value stored in the code function header xA(Br1). *x/ */ +/* OBSOLETE #define FRAME_CHAIN(thisframe) (findframe(thisframe)) */ +/* OBSOLETE */ +/* OBSOLETE extern int gould_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); */ +/* OBSOLETE #define FRAME_CHAIN_VALID(chain, thisframe) gould_frame_chain_valid (chain, thisframe) */ +/* OBSOLETE */ +/* OBSOLETE /* Define other aspects of the stack frame on NPL. *x/ */ +/* OBSOLETE #define FRAME_SAVED_PC(FRAME) \ */ +/* OBSOLETE (read_memory_integer ((FRAME)->frame + 8, 4)) */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) \ */ +/* OBSOLETE ((fi)->next ? \ */ +/* OBSOLETE read_memory_integer ((fi)->frame + 12, 4) : \ */ +/* OBSOLETE read_register (AP_REGNUM)) */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) */ +/* OBSOLETE */ +/* OBSOLETE /* Set VAL to the number of args passed to frame described by FI. */ +/* OBSOLETE Can set VAL to -1, meaning no way to tell. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* We can check the stab info to see how */ +/* OBSOLETE many arg we have. No info in stack will tell us *x/ */ +/* OBSOLETE #define FRAME_NUM_ARGS(val,fi) (val = findarg(fi)) */ +/* OBSOLETE */ +/* OBSOLETE /* Return number of bytes at start of arglist that are not really args. *x/ */ +/* OBSOLETE #define FRAME_ARGS_SKIP 8 */ +/* OBSOLETE */ +/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */ +/* OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO. */ +/* OBSOLETE This includes special registers such as pc and fp saved in special */ +/* OBSOLETE ways in the stack frame. sp is even more special: */ +/* OBSOLETE the address we return for it IS the sp for the next frame. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ */ +/* OBSOLETE { \ */ +/* OBSOLETE memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ */ +/* OBSOLETE (frame_saved_regs).regs[SP_REGNUM] = framechain (frame_info); \ */ +/* OBSOLETE (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 8; \ */ +/* OBSOLETE (frame_saved_regs).regs[R4_REGNUM] = (frame_info)->frame + 0x30; \ */ +/* OBSOLETE (frame_saved_regs).regs[R5_REGNUM] = (frame_info)->frame + 0x34; \ */ +/* OBSOLETE (frame_saved_regs).regs[R6_REGNUM] = (frame_info)->frame + 0x38; \ */ +/* OBSOLETE (frame_saved_regs).regs[R7_REGNUM] = (frame_info)->frame + 0x3C; \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Things needed for making the inferior call functions. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_LOCATION BEFORE_TEXT_END */ +/* OBSOLETE #define NEED_TEXT_START_END 1 */ +/* OBSOLETE */ +/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define PUSH_DUMMY_FRAME \ */ +/* OBSOLETE { register CORE_ADDR sp = read_register (SP_REGNUM); \ */ +/* OBSOLETE register int regnum; \ */ +/* OBSOLETE for (regnum = 0; regnum < FP_REGNUM; regnum++) \ */ +/* OBSOLETE sp = push_word (sp, read_register (regnum)); \ */ +/* OBSOLETE sp = push_word (sp, read_register (PS_REGNUM)); \ */ +/* OBSOLETE sp = push_word (sp, read_register (PC_REGNUM)); \ */ +/* OBSOLETE write_register (SP_REGNUM, sp);} */ +/* OBSOLETE */ +/* OBSOLETE /* Discard from the stack the innermost frame, */ +/* OBSOLETE restoring all saved registers. *x/ */ +/* OBSOLETE /* FIXME: Should be using {store,extract}_unsigned_integer. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define POP_FRAME \ */ +/* OBSOLETE { CORE_ADDR sp = read_register(SP_REGNUM); \ */ +/* OBSOLETE ULONGEST reg; \ */ +/* OBSOLETE int regnum; \ */ +/* OBSOLETE for(regnum = 0;regnum < FP_REGNUM;regnum++){ \ */ +/* OBSOLETE sp-=REGISTER_SIZE; \ */ +/* OBSOLETE read_memory(sp,®,REGISTER_SIZE); \ */ +/* OBSOLETE write_register(regnum,reg);} \ */ +/* OBSOLETE sp-=REGISTER_SIZE; \ */ +/* OBSOLETE read_memory(sp,®,REGISTER_SIZE); \ */ +/* OBSOLETE write_register(PS_REGNUM,reg); \ */ +/* OBSOLETE sp-=REGISTER_SIZE; \ */ +/* OBSOLETE read_memory(sp,®,REGISTER_SIZE); \ */ +/* OBSOLETE write_register(PC_REGNUM,reg);} */ +/* OBSOLETE */ +/* OBSOLETE /* MJD - Size of dummy frame pushed onto stack by PUSH_DUMMY_FRAME *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define DUMMY_FRAME_SIZE (0x48) */ +/* OBSOLETE */ +/* OBSOLETE /* MJD - The sequence of words in the instructions is */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE subr b2,stack size,0 grab stack space for dummy call */ +/* OBSOLETE labr b3,x0(b2),0 set AP_REGNUM to point at arguments */ +/* OBSOLETE lw r2,x8(b3),0 load r2 with first argument */ +/* OBSOLETE lwbr b1,arguments size(b2),0 load address of function to be called */ +/* OBSOLETE brlnk r1,x8(b1),0 call function */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE labr b2,stack size(b2),0 give back stack */ +/* OBSOLETE break break */ +/* OBSOLETE *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY {0x00000000, \ */ +/* OBSOLETE 0x00000000, \ */ +/* OBSOLETE 0x59000000, \ */ +/* OBSOLETE 0x598a0000, \ */ +/* OBSOLETE 0xb5030008, \ */ +/* OBSOLETE 0x5c820000, \ */ +/* OBSOLETE 0x44810008, \ */ +/* OBSOLETE 0x00000000, \ */ +/* OBSOLETE 0x590a0000, \ */ +/* OBSOLETE 0x28090000 } */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_LENGTH 40 */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_START_OFFSET 8 */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_STACK_ADJUST 8 */ +/* OBSOLETE */ +/* OBSOLETE /* MJD - Fixup CALL_DUMMY for the specific function call. */ +/* OBSOLETE OK heres the problems */ +/* OBSOLETE 1) On a trap there are two copies of the stack pointer, one in SP_REGNUM */ +/* OBSOLETE which is read/write and one in FP_REGNUM which is only read. It seems */ +/* OBSOLETE that when restarting the GOULD NP1 uses FP_REGNUM's value. */ +/* OBSOLETE 2) Loading function address into b1 looks a bit difficult if bigger than */ +/* OBSOLETE 0x0000fffc, infact from what I can tell the compiler sets up table of */ +/* OBSOLETE function address in base3 through which function calls are referenced. */ +/* OBSOLETE */ +/* OBSOLETE OK my solutions */ +/* OBSOLETE Calculate the size of the dummy stack frame and do adjustments of */ +/* OBSOLETE SP_REGNUM in the dummy call. */ +/* OBSOLETE Push function address onto the stack and load it in the dummy call */ +/* OBSOLETE *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, sp, fun, nargs, args, type, gcc_p) \ */ +/* OBSOLETE { int i;\ */ +/* OBSOLETE int arg_len = 0, total_len;\ */ +/* OBSOLETE old_sp = push_word(old_sp,fun);\ */ +/* OBSOLETE for(i = nargs - 1;i >= 0;i--)\ */ +/* OBSOLETE arg_len += TYPE_LENGTH (VALUE_TYPE (value_arg_coerce (args[i])));\ */ +/* OBSOLETE if(struct_return)\ */ +/* OBSOLETE arg_len += TYPE_LENGTH(value_type);\ */ +/* OBSOLETE total_len = DUMMY_FRAME_SIZE+CALL_DUMMY_STACK_ADJUST+4+arg_len;\ */ +/* OBSOLETE dummyname[0] += total_len;\ */ +/* OBSOLETE dummyname[2] += total_len;\ */ +/* OBSOLETE dummyname[5] += arg_len+CALL_DUMMY_STACK_ADJUST;\ */ +/* OBSOLETE dummyname[8] += total_len;} */ +/* OBSOLETE */ +/* OBSOLETE /* MJD - So the stack should end up looking like this */ +/* OBSOLETE */ +/* OBSOLETE | Normal stack frame | */ +/* OBSOLETE | from normal program | */ +/* OBSOLETE | flow | */ +/* OBSOLETE +---------------------+ <- Final sp - 0x08 - argument size */ +/* OBSOLETE | | - 0x4 - dummy_frame_size */ +/* OBSOLETE | Pushed dummy frame | */ +/* OBSOLETE | b0-b7, r0-r7 | */ +/* OBSOLETE | pc and ps | */ +/* OBSOLETE | | */ +/* OBSOLETE +---------------------+ */ +/* OBSOLETE | Function address | */ +/* OBSOLETE +---------------------+ <- Final sp - 0x8 - arguments size */ +/* OBSOLETE | | */ +/* OBSOLETE | | */ +/* OBSOLETE | | */ +/* OBSOLETE | Arguments to | */ +/* OBSOLETE | Function | */ +/* OBSOLETE | | */ +/* OBSOLETE | | */ +/* OBSOLETE | | */ +/* OBSOLETE +---------------------+ <- Final sp - 0x8 */ +/* OBSOLETE | Dummy_stack_adjust | */ +/* OBSOLETE +---------------------+ <- Final sp */ +/* OBSOLETE | | */ +/* OBSOLETE | where call will | */ +/* OBSOLETE | build frame | */ +/* OBSOLETE *x/ */ diff --git a/gdb/config/gould/tm-pn.h b/gdb/config/gould/tm-pn.h new file mode 100644 index 0000000..b44d4ee --- /dev/null +++ b/gdb/config/gould/tm-pn.h @@ -0,0 +1,409 @@ +/* OBSOLETE /* Parameters for targe of a Gould Powernode, for GDB, the GNU debugger. */ +/* OBSOLETE Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. */ +/* OBSOLETE */ +/* OBSOLETE This file is part of GDB. */ +/* OBSOLETE */ +/* OBSOLETE This program is free software; you can redistribute it and/or modify */ +/* OBSOLETE it under the terms of the GNU General Public License as published by */ +/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */ +/* OBSOLETE (at your option) any later version. */ +/* OBSOLETE */ +/* OBSOLETE This program is distributed in the hope that it will be useful, */ +/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */ +/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ +/* OBSOLETE GNU General Public License for more details. */ +/* OBSOLETE */ +/* OBSOLETE You should have received a copy of the GNU General Public License */ +/* OBSOLETE along with this program; if not, write to the Free Software */ +/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define GOULD_PN */ +/* OBSOLETE */ +/* OBSOLETE #define TARGET_BYTE_ORDER BIG_ENDIAN */ +/* OBSOLETE */ +/* OBSOLETE /* This code appears in libraries on Gould machines. Ignore it. *x/ */ +/* OBSOLETE #define IGNORE_SYMBOL(type) (type == N_ENTRY) */ +/* OBSOLETE */ +/* OBSOLETE /* We don't want the extra gnu symbols on the machine; */ +/* OBSOLETE they will interfere with the shared segment symbols. *x/ */ +/* OBSOLETE #define NO_GNU_STABS */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for text-offset and data info (in PN a.out format). *x/ */ +/* OBSOLETE #define TEXTINFO \ */ +/* OBSOLETE text_offset = N_TXTOFF (exec_coffhdr); \ */ +/* OBSOLETE exec_data_offset = N_TXTOFF (exec_coffhdr) \ */ +/* OBSOLETE + exec_aouthdr.a_text */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for number of symbol table entries (this used to be checked */ +/* OBSOLETE in dbxread.c and caused the last psymtab to use this as the end of */ +/* OBSOLETE text. I'm not sure whether it would still be necessary). *x/ */ +/* OBSOLETE #define END_OF_TEXT_DEFAULT \ */ +/* OBSOLETE (0xffffff) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for number of symbol table entries *x/ */ +/* OBSOLETE #define NUMBER_OF_SYMBOLS \ */ +/* OBSOLETE (coffhdr.f_nsyms) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for file-offset of symbol table (in usual a.out format). *x/ */ +/* OBSOLETE #define SYMBOL_TABLE_OFFSET \ */ +/* OBSOLETE N_SYMOFF (coffhdr) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro for file-offset of string table (in usual a.out format). *x/ */ +/* OBSOLETE #define STRING_TABLE_OFFSET \ */ +/* OBSOLETE (N_STROFF (coffhdr) + sizeof(int)) */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to store the length of the string table data in INTO. *x/ */ +/* OBSOLETE #define READ_STRING_TABLE_SIZE(INTO) \ */ +/* OBSOLETE { INTO = hdr.a_stsize; } */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to declare variables to hold the file's header data. *x/ */ +/* OBSOLETE #define DECLARE_FILE_HEADERS struct old_exec hdr; \ */ +/* OBSOLETE FILHDR coffhdr */ +/* OBSOLETE */ +/* OBSOLETE /* Macro to read the header data from descriptor DESC and validate it. */ +/* OBSOLETE NAME is the file name, for error messages. *x/ */ +/* OBSOLETE #define READ_FILE_HEADERS(DESC, NAME) \ */ +/* OBSOLETE { val = myread (DESC, &coffhdr, sizeof coffhdr); \ */ +/* OBSOLETE if (val < 0) \ */ +/* OBSOLETE perror_with_name (NAME); \ */ +/* OBSOLETE val = myread (DESC, &hdr, sizeof hdr); \ */ +/* OBSOLETE if (val < 0) \ */ +/* OBSOLETE perror_with_name (NAME); \ */ +/* OBSOLETE if (coffhdr.f_magic != GNP1MAGIC) \ */ +/* OBSOLETE error ("File \"%s\" not in coff executable format.", NAME); \ */ +/* OBSOLETE if (N_BADMAG (hdr)) \ */ +/* OBSOLETE error ("File \"%s\" not in executable format.", NAME); } */ +/* OBSOLETE */ +/* OBSOLETE /* Define COFF and other symbolic names needed on NP1 *x/ */ +/* OBSOLETE #define NS32GMAGIC GDPMAGIC */ +/* OBSOLETE #define NS32SMAGIC PN_MAGIC */ +/* OBSOLETE */ +/* OBSOLETE /* Offset from address of function to start of its code. */ +/* OBSOLETE Zero on most machines. *x/ */ +/* OBSOLETE #define FUNCTION_START_OFFSET 4 */ +/* OBSOLETE */ +/* OBSOLETE /* Advance PC across any function entry prologue instructions */ +/* OBSOLETE to reach some "real" code. One PN we can have one or two startup */ +/* OBSOLETE sequences depending on the size of the local stack: */ +/* OBSOLETE */ +/* OBSOLETE Either: */ +/* OBSOLETE "suabr b2, #" */ +/* OBSOLETE of */ +/* OBSOLETE "lil r4, #", "suabr b2, #(r4)" */ +/* OBSOLETE */ +/* OBSOLETE "lwbr b6, #", "stw r1, 8(b2)" */ +/* OBSOLETE Optional "stwbr b3, c(b2)" */ +/* OBSOLETE Optional "trr r2,r7" (Gould first argument register passing) */ +/* OBSOLETE or */ +/* OBSOLETE Optional "stw r2,8(b3)" (Gould first argument register passing) */ +/* OBSOLETE *x/ */ +/* OBSOLETE #define SKIP_PROLOGUE(pc) { \ */ +/* OBSOLETE register int op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x580B0000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x59400000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x5F000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xD4820008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0x5582000C) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xd5030008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x59000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if ((op & 0xffff0000) == 0x5F000000) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xD4820008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0x5582000C) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 4); \ */ +/* OBSOLETE if (op == 0xd5030008) { \ */ +/* OBSOLETE pc += 4; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } else { \ */ +/* OBSOLETE op = read_memory_integer ((pc), 2); \ */ +/* OBSOLETE if (op == 0x2fa0) { \ */ +/* OBSOLETE pc += 2; \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Immediately after a function call, return the saved pc. */ +/* OBSOLETE Can't go through the frames for this because on some machines */ +/* OBSOLETE the new frame is not set up until the new function executes */ +/* OBSOLETE some instructions. True on PN! Return address is in R1. */ +/* OBSOLETE Note: true return location is 4 bytes past R1! *x/ */ +/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) \ */ +/* OBSOLETE (read_register(R1_REGNUM) + 4) */ +/* OBSOLETE */ +/* OBSOLETE /* Address of end of stack space. *x/ */ +/* OBSOLETE #define STACK_END_ADDR 0x480000 */ +/* OBSOLETE */ +/* OBSOLETE /* Stack grows downward. *x/ */ +/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */ +/* OBSOLETE */ +/* OBSOLETE /* Sequence of bytes for breakpoint instruction. *x/ */ +/* OBSOLETE #define BREAKPOINT {0x28, 0x09} */ +/* OBSOLETE */ +/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */ +/* OBSOLETE This is often the number of bytes in BREAKPOINT */ +/* OBSOLETE but not always. *x/ */ +/* OBSOLETE #define DECR_PC_AFTER_BREAK 2 */ +/* OBSOLETE */ +/* OBSOLETE /* Return 1 if P points to an invalid floating point value. *x/ */ +/* OBSOLETE #define INVALID_FLOAT(p, len) ((*(short *)p & 0xff80) == 0x8000) */ +/* OBSOLETE */ +/* OBSOLETE /* Say how long (ordinary) registers are. This is a piece of bogosity */ +/* OBSOLETE used in push_word and a few other places; REGISTER_RAW_SIZE is the */ +/* OBSOLETE real way to know how big a register is. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define REGISTER_SIZE 4 */ +/* OBSOLETE */ +/* OBSOLETE /* Number of machine registers *x/ */ +/* OBSOLETE #define NUM_REGS 19 */ +/* OBSOLETE #define NUM_GEN_REGS 16 */ +/* OBSOLETE #define NUM_CPU_REGS 3 */ +/* OBSOLETE */ +/* OBSOLETE /* Initializer for an array of names of registers. */ +/* OBSOLETE There should be NUM_REGS strings in this initializer. *x/ */ +/* OBSOLETE #define REGISTER_NAMES { \ */ +/* OBSOLETE "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ */ +/* OBSOLETE "b0", "b1", "b2", "b3", "b4", "b5", "b6", "b7", \ */ +/* OBSOLETE "sp", "ps", "pc", \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Register numbers of various important registers. */ +/* OBSOLETE Note that some of these values are "real" register numbers, */ +/* OBSOLETE and correspond to the general registers of the machine, */ +/* OBSOLETE and some are "phony" register numbers which are too large */ +/* OBSOLETE to be actual register numbers as far as the user is concerned */ +/* OBSOLETE but do serve to get the desired values when passed to read_register. *x/ */ +/* OBSOLETE #define R1_REGNUM 1 /* Gr1 => return address of caller *x/ */ +/* OBSOLETE #define R4_REGNUM 4 /* Gr4 => register save area *x/ */ +/* OBSOLETE #define R5_REGNUM 5 /* Gr5 => register save area *x/ */ +/* OBSOLETE #define R6_REGNUM 6 /* Gr6 => register save area *x/ */ +/* OBSOLETE #define R7_REGNUM 7 /* Gr7 => register save area *x/ */ +/* OBSOLETE #define B1_REGNUM 9 /* Br1 => start of this code routine *x/ */ +/* OBSOLETE #define FP_REGNUM 10 /* Br2 == (sp) *x/ */ +/* OBSOLETE #define AP_REGNUM 11 /* Br3 == (ap) *x/ */ +/* OBSOLETE #define SP_REGNUM 16 /* A copy of Br2 saved in trap *x/ */ +/* OBSOLETE #define PS_REGNUM 17 /* Contains processor status *x/ */ +/* OBSOLETE #define PC_REGNUM 18 /* Contains program counter *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */ +/* OBSOLETE register state, the array `registers'. *x/ */ +/* OBSOLETE #define REGISTER_BYTES (NUM_GEN_REGS*4 + NUM_CPU_REGS*4) */ +/* OBSOLETE */ +/* OBSOLETE /* Index within `registers' of the first byte of the space for */ +/* OBSOLETE register N. *x/ */ +/* OBSOLETE #define REGISTER_BYTE(N) ((N) * 4) */ +/* OBSOLETE */ +/* OBSOLETE /* Number of bytes of storage in the actual machine representation */ +/* OBSOLETE for register N. On the PN, all normal regs are 4 bytes. *x/ */ +/* OBSOLETE #define REGISTER_RAW_SIZE(N) (4) */ +/* OBSOLETE */ +/* OBSOLETE /* Number of bytes of storage in the program's representation */ +/* OBSOLETE for register N. On the PN, all regs are 4 bytes. *x/ */ +/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N) (4) */ +/* OBSOLETE */ +/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have. *x/ */ +/* OBSOLETE #define MAX_REGISTER_RAW_SIZE (4) */ +/* OBSOLETE */ +/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have. *x/ */ +/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE (4) */ +/* OBSOLETE */ +/* OBSOLETE /* Return the GDB type object for the "standard" data type */ +/* OBSOLETE of data in register N. *x/ */ +/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N) (builtin_type_int) */ +/* OBSOLETE */ +/* OBSOLETE /* Store the address of the place in which to copy the structure the */ +/* OBSOLETE subroutine will return. This is called from call_function. */ +/* OBSOLETE */ +/* OBSOLETE On this machine this is a no-op, because gcc isn't used on it */ +/* OBSOLETE yet. So this calling convention is not used. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) */ +/* OBSOLETE */ +/* OBSOLETE /* Extract from an arrary REGBUF containing the (raw) register state */ +/* OBSOLETE a function return value of type TYPE, and copy that, in virtual format, */ +/* OBSOLETE into VALBUF. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */ +/* OBSOLETE memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) */ +/* OBSOLETE */ +/* OBSOLETE /* Write into appropriate registers a function return value */ +/* OBSOLETE of type TYPE, given in virtual format. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */ +/* OBSOLETE write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) */ +/* OBSOLETE */ +/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */ +/* OBSOLETE the address in which a function should return its structure value, */ +/* OBSOLETE as a CORE_ADDR (or an expression that can be used as one). *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) */ +/* OBSOLETE */ +/* OBSOLETE */ +/* OBSOLETE /* Describe the pointer in each stack frame to the previous stack frame */ +/* OBSOLETE (its caller). *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* FRAME_CHAIN takes a frame's nominal address */ +/* OBSOLETE and produces the frame's chain-pointer. */ +/* OBSOLETE */ +/* OBSOLETE However, if FRAME_CHAIN_VALID returns zero, */ +/* OBSOLETE it means the given frame is the outermost one and has no caller. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* In the case of the NPL, the frame's norminal address is Br2 and the */ +/* OBSOLETE previous routines frame is up the stack X bytes, where X is the */ +/* OBSOLETE value stored in the code function header xA(Br1). *x/ */ +/* OBSOLETE #define FRAME_CHAIN(thisframe) (findframe(thisframe)) */ +/* OBSOLETE */ +/* OBSOLETE extern int gould_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); */ +/* OBSOLETE #define FRAME_CHAIN_VALID(chain, thisframe) gould_frame_chain_valid (chain, thisframe) */ +/* OBSOLETE */ +/* OBSOLETE /* Define other aspects of the stack frame on NPL. *x/ */ +/* OBSOLETE #define FRAME_SAVED_PC(frame) \ */ +/* OBSOLETE (read_memory_integer ((frame)->frame + 8, 4)) */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) \ */ +/* OBSOLETE ((fi)->next ? \ */ +/* OBSOLETE read_memory_integer ((fi)->frame + 12, 4) : \ */ +/* OBSOLETE read_register (AP_REGNUM)) */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame + 80) */ +/* OBSOLETE */ +/* OBSOLETE /* Set VAL to the number of args passed to frame described by FI. */ +/* OBSOLETE Can set VAL to -1, meaning no way to tell. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* We can check the stab info to see how */ +/* OBSOLETE many arg we have. No info in stack will tell us *x/ */ +/* OBSOLETE #define FRAME_NUM_ARGS(val,fi) (val = findarg(fi)) */ +/* OBSOLETE */ +/* OBSOLETE /* Return number of bytes at start of arglist that are not really args. *x/ */ +/* OBSOLETE #define FRAME_ARGS_SKIP 8 */ +/* OBSOLETE */ +/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */ +/* OBSOLETE the addresses of the saved registers of frame described by FRAME_INFO. */ +/* OBSOLETE This includes special registers such as pc and fp saved in special */ +/* OBSOLETE ways in the stack frame. sp is even more special: */ +/* OBSOLETE the address we return for it IS the sp for the next frame. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ */ +/* OBSOLETE { \ */ +/* OBSOLETE memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ */ +/* OBSOLETE (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 8; \ */ +/* OBSOLETE (frame_saved_regs).regs[R4_REGNUM] = (frame_info)->frame + 0x30; \ */ +/* OBSOLETE (frame_saved_regs).regs[R5_REGNUM] = (frame_info)->frame + 0x34; \ */ +/* OBSOLETE (frame_saved_regs).regs[R6_REGNUM] = (frame_info)->frame + 0x38; \ */ +/* OBSOLETE (frame_saved_regs).regs[R7_REGNUM] = (frame_info)->frame + 0x3C; \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Things needed for making the inferior call functions. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define PUSH_DUMMY_FRAME \ */ +/* OBSOLETE { register CORE_ADDR sp = read_register (SP_REGNUM); \ */ +/* OBSOLETE register int regnum; \ */ +/* OBSOLETE sp = push_word (sp, read_register (PC_REGNUM)); \ */ +/* OBSOLETE sp = push_word (sp, read_register (FP_REGNUM)); \ */ +/* OBSOLETE write_register (FP_REGNUM, sp); \ */ +/* OBSOLETE for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \ */ +/* OBSOLETE sp = push_word (sp, read_register (regnum)); \ */ +/* OBSOLETE sp = push_word (sp, read_register (PS_REGNUM)); \ */ +/* OBSOLETE write_register (SP_REGNUM, sp); } */ +/* OBSOLETE */ +/* OBSOLETE /* Discard from the stack the innermost frame, */ +/* OBSOLETE restoring all saved registers. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define POP_FRAME \ */ +/* OBSOLETE { register struct frame_info *frame = get_current_frame (); \ */ +/* OBSOLETE register CORE_ADDR fp; \ */ +/* OBSOLETE register int regnum; \ */ +/* OBSOLETE struct frame_saved_regs fsr; \ */ +/* OBSOLETE struct frame_info *fi; \ */ +/* OBSOLETE fp = frame->frame; \ */ +/* OBSOLETE get_frame_saved_regs (frame, &fsr); \ */ +/* OBSOLETE for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \ */ +/* OBSOLETE if (fsr.regs[regnum]) \ */ +/* OBSOLETE write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \ */ +/* OBSOLETE if (fsr.regs[PS_REGNUM]) \ */ +/* OBSOLETE write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4)); \ */ +/* OBSOLETE write_register (FP_REGNUM, read_memory_integer (fp, 4)); \ */ +/* OBSOLETE write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \ */ +/* OBSOLETE write_register (SP_REGNUM, fp + 8); \ */ +/* OBSOLETE flush_cached_frames (); \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* This sequence of words is the instructions: */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE suabr b2, #<stacksize> */ +/* OBSOLETE lwbr b6, #con */ +/* OBSOLETE stw r1, 8(b2) - save caller address, do we care? */ +/* OBSOLETE lw r2, 60(b2) - arg1 */ +/* OBSOLETE labr b3, 50(b2) */ +/* OBSOLETE std r4, 30(b2) - save r4-r7 */ +/* OBSOLETE std r6, 38(b2) */ +/* OBSOLETE lwbr b1, #<func> - load function call address */ +/* OBSOLETE brlnk r1, 8(b1) - call function */ +/* OBSOLETE halt */ +/* OBSOLETE halt */ +/* OBSOLETE ld r4, 30(b2) - restore r4-r7 */ +/* OBSOLETE ld r6, 38(b2) */ +/* OBSOLETE */ +/* OBSOLETE Setup our stack frame, load argumemts, call and then restore registers. */ +/* OBSOLETE *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* FIXME: The below defines an m68k CALL_DUMMY, which looks nothing like what */ +/* OBSOLETE is documented above. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, 0x4e4f4e71} */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_LENGTH 28 */ +/* OBSOLETE */ +/* OBSOLETE #define CALL_DUMMY_START_OFFSET 12 */ +/* OBSOLETE */ +/* OBSOLETE /* Insert the specified number of args and function address */ +/* OBSOLETE into a call sequence of the above form stored at DUMMYNAME. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ */ +/* OBSOLETE { *(int *)((char *) dummyname + 20) = nargs * 4; \ */ +/* OBSOLETE *(int *)((char *) dummyname + 14) = fun; } */ diff --git a/gdb/config/gould/xm-np1.h b/gdb/config/gould/xm-np1.h new file mode 100644 index 0000000..63bc450 --- /dev/null +++ b/gdb/config/gould/xm-np1.h @@ -0,0 +1,94 @@ +/* OBSOLETE /* Parameters for execution on a Gould NP1, for GDB, the GNU debugger. */ +/* OBSOLETE Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. */ +/* OBSOLETE */ +/* OBSOLETE This file is part of GDB. */ +/* OBSOLETE */ +/* OBSOLETE This program is free software; you can redistribute it and/or modify */ +/* OBSOLETE it under the terms of the GNU General Public License as published by */ +/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */ +/* OBSOLETE (at your option) any later version. */ +/* OBSOLETE */ +/* OBSOLETE This program is distributed in the hope that it will be useful, */ +/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */ +/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ +/* OBSOLETE GNU General Public License for more details. */ +/* OBSOLETE */ +/* OBSOLETE You should have received a copy of the GNU General Public License */ +/* OBSOLETE along with this program; if not, write to the Free Software */ +/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */ +/* OBSOLETE */ +/* OBSOLETE /* Address of U in kernel space *x/ */ +/* OBSOLETE #define KERNEL_U_ADDR 0x7fffc000 */ +/* OBSOLETE */ +/* OBSOLETE /* This is a piece of magic that is given a register number REGNO */ +/* OBSOLETE and as BLOCKEND the address in the system of the end of the user structure */ +/* OBSOLETE and stores in ADDR the address in the kernel or core dump */ +/* OBSOLETE of that register. *x/ */ +/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno) { \ */ +/* OBSOLETE addr = blockend + regno * 4; \ */ +/* OBSOLETE if (regno == VE_REGNUM) addr = blockend - 9 * 4; \ */ +/* OBSOLETE if (regno == PC_REGNUM) addr = blockend - 8 * 4; \ */ +/* OBSOLETE if (regno == PS_REGNUM) addr = blockend - 7 * 4; \ */ +/* OBSOLETE if (regno == FP_REGNUM) addr = blockend - 6 * 4; \ */ +/* OBSOLETE if (regno >= V1_REGNUM) \ */ +/* OBSOLETE addr = blockend + 16 * 4 + (regno - V1_REGNUM) * VR_SIZE; \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* Don't try to write the frame pointer. *x/ */ +/* OBSOLETE #define CANNOT_STORE_REGISTER(regno) ((regno) == FP_REGNUM) */ +/* OBSOLETE */ +/* OBSOLETE /* */ +/* OBSOLETE * No KDB support, Yet! *x/ */ +/* OBSOLETE /* Interface definitions for kernel debugger KDB. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* Map machine fault codes into signal numbers. */ +/* OBSOLETE First subtract 0, divide by 4, then index in a table. */ +/* OBSOLETE Faults for which the entry in this table is 0 */ +/* OBSOLETE are not handled by KDB; the program's own trap handler */ +/* OBSOLETE gets to handle then. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */ +/* OBSOLETE #define FAULT_CODE_UNITS 4 */ +/* OBSOLETE #define FAULT_TABLE \ */ +/* OBSOLETE { 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ */ +/* OBSOLETE 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ */ +/* OBSOLETE 0, 0, 0, 0, 0, 0, 0, 0, \ */ +/* OBSOLETE SIGILL } */ +/* OBSOLETE */ +/* OBSOLETE /* Start running with a stack stretching from BEG to END. */ +/* OBSOLETE BEG and END should be symbols meaningful to the assembler. */ +/* OBSOLETE This is used only for kdb. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define INIT_STACK(beg, end) \ */ +/* OBSOLETE { asm (".globl end"); \ */ +/* OBSOLETE asm ("movel $ end, sp"); \ */ +/* OBSOLETE asm ("clrl fp"); } */ +/* OBSOLETE */ +/* OBSOLETE /* Push the frame pointer register on the stack. *x/ */ +/* OBSOLETE #define PUSH_FRAME_PTR \ */ +/* OBSOLETE asm ("movel fp, -(sp)"); */ +/* OBSOLETE */ +/* OBSOLETE /* Copy the top-of-stack to the frame pointer register. *x/ */ +/* OBSOLETE #define POP_FRAME_PTR \ */ +/* OBSOLETE asm ("movl (sp), fp"); */ +/* OBSOLETE */ +/* OBSOLETE /* After KDB is entered by a fault, push all registers */ +/* OBSOLETE that GDB thinks about (all NUM_REGS of them), */ +/* OBSOLETE so that they appear in order of ascending GDB register number. */ +/* OBSOLETE The fault code will be on the stack beyond the last register. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define PUSH_REGISTERS \ */ +/* OBSOLETE { asm ("clrw -(sp)"); \ */ +/* OBSOLETE asm ("pea 10(sp)"); \ */ +/* OBSOLETE asm ("movem $ 0xfffe,-(sp)"); } */ +/* OBSOLETE */ +/* OBSOLETE /* Assuming the registers (including processor status) have been */ +/* OBSOLETE pushed on the stack in order of ascending GDB register number, */ +/* OBSOLETE restore them and return to the address in the saved PC register. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define POP_REGISTERS \ */ +/* OBSOLETE { asm ("subil $8,28(sp)"); \ */ +/* OBSOLETE asm ("movem (sp),$ 0xffff"); \ */ +/* OBSOLETE asm ("rte"); } */ diff --git a/gdb/config/gould/xm-pn.h b/gdb/config/gould/xm-pn.h new file mode 100644 index 0000000..2540cfc --- /dev/null +++ b/gdb/config/gould/xm-pn.h @@ -0,0 +1,87 @@ +/* OBSOLETE /* Parameters for execution on a Gould PN, for GDB, the GNU debugger. */ +/* OBSOLETE Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. */ +/* OBSOLETE */ +/* OBSOLETE This file is part of GDB. */ +/* OBSOLETE */ +/* OBSOLETE This program is free software; you can redistribute it and/or modify */ +/* OBSOLETE it under the terms of the GNU General Public License as published by */ +/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */ +/* OBSOLETE (at your option) any later version. */ +/* OBSOLETE */ +/* OBSOLETE This program is distributed in the hope that it will be useful, */ +/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */ +/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ +/* OBSOLETE GNU General Public License for more details. */ +/* OBSOLETE */ +/* OBSOLETE You should have received a copy of the GNU General Public License */ +/* OBSOLETE along with this program; if not, write to the Free Software */ +/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */ +/* OBSOLETE */ +/* OBSOLETE /* Address of U in kernel space *x/ */ +/* OBSOLETE #define KERNEL_U_ADDR 0x3fc000 */ +/* OBSOLETE */ +/* OBSOLETE /* This is a piece of magic that is given a register number REGNO */ +/* OBSOLETE and as BLOCKEND the address in the system of the end of the user structure */ +/* OBSOLETE and stores in ADDR the address in the kernel or core dump */ +/* OBSOLETE of that register. *x/ */ +/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno) { \ */ +/* OBSOLETE addr = blockend + regno * 4; \ */ +/* OBSOLETE if (regno == PC_REGNUM) addr = blockend - 8 * 4; \ */ +/* OBSOLETE if (regno == PS_REGNUM) addr = blockend - 7 * 4; \ */ +/* OBSOLETE if (regno == SP_REGNUM) addr = blockend - 6 * 4; \ */ +/* OBSOLETE } */ +/* OBSOLETE */ +/* OBSOLETE /* No KDB support, Yet! *x/ */ +/* OBSOLETE /* Interface definitions for kernel debugger KDB. *x/ */ +/* OBSOLETE */ +/* OBSOLETE /* Map machine fault codes into signal numbers. */ +/* OBSOLETE First subtract 0, divide by 4, then index in a table. */ +/* OBSOLETE Faults for which the entry in this table is 0 */ +/* OBSOLETE are not handled by KDB; the program's own trap handler */ +/* OBSOLETE gets to handle then. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */ +/* OBSOLETE #define FAULT_CODE_UNITS 4 */ +/* OBSOLETE #define FAULT_TABLE \ */ +/* OBSOLETE { 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ */ +/* OBSOLETE 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ */ +/* OBSOLETE 0, 0, 0, 0, 0, 0, 0, 0, \ */ +/* OBSOLETE SIGILL } */ +/* OBSOLETE */ +/* OBSOLETE /* Start running with a stack stretching from BEG to END. */ +/* OBSOLETE BEG and END should be symbols meaningful to the assembler. */ +/* OBSOLETE This is used only for kdb. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define INIT_STACK(beg, end) \ */ +/* OBSOLETE { asm (".globl end"); \ */ +/* OBSOLETE asm ("movel $ end, sp"); \ */ +/* OBSOLETE asm ("clrl fp"); } */ +/* OBSOLETE */ +/* OBSOLETE /* Push the frame pointer register on the stack. *x/ */ +/* OBSOLETE #define PUSH_FRAME_PTR \ */ +/* OBSOLETE asm ("movel fp, -(sp)"); */ +/* OBSOLETE */ +/* OBSOLETE /* Copy the top-of-stack to the frame pointer register. *x/ */ +/* OBSOLETE #define POP_FRAME_PTR \ */ +/* OBSOLETE asm ("movl (sp), fp"); */ +/* OBSOLETE */ +/* OBSOLETE /* After KDB is entered by a fault, push all registers */ +/* OBSOLETE that GDB thinks about (all NUM_REGS of them), */ +/* OBSOLETE so that they appear in order of ascending GDB register number. */ +/* OBSOLETE The fault code will be on the stack beyond the last register. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define PUSH_REGISTERS \ */ +/* OBSOLETE { asm ("clrw -(sp)"); \ */ +/* OBSOLETE asm ("pea 10(sp)"); \ */ +/* OBSOLETE asm ("movem $ 0xfffe,-(sp)"); } */ +/* OBSOLETE */ +/* OBSOLETE /* Assuming the registers (including processor status) have been */ +/* OBSOLETE pushed on the stack in order of ascending GDB register number, */ +/* OBSOLETE restore them and return to the address in the saved PC register. *x/ */ +/* OBSOLETE */ +/* OBSOLETE #define POP_REGISTERS \ */ +/* OBSOLETE { asm ("subil $8,28(sp)"); \ */ +/* OBSOLETE asm ("movem (sp),$ 0xffff"); \ */ +/* OBSOLETE asm ("rte"); } */ diff --git a/gdb/config/h8300/h8300.mt b/gdb/config/h8300/h8300.mt new file mode 100644 index 0000000..c6e25ab --- /dev/null +++ b/gdb/config/h8300/h8300.mt @@ -0,0 +1,6 @@ +# Target: H8300 with HMS monitor, E7000 ICE and H8 simulator +TDEPFILES= h8300-tdep.o remote-e7000.o ser-e7kpc.o monitor.o remote-hms.o dsrec.o +TM_FILE= tm-h8300.h + +SIM_OBS = remote-sim.o +SIM = ../sim/h8300/libsim.a diff --git a/gdb/config/h8300/tm-h8300.h b/gdb/config/h8300/tm-h8300.h new file mode 100644 index 0000000..b398d2f --- /dev/null +++ b/gdb/config/h8300/tm-h8300.h @@ -0,0 +1,303 @@ +/* Parameters for execution on a H8/300 series machine. + Copyright 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Contributed by Steve Chamberlain sac@cygnus.com */ + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct value; +struct type; +#endif + +/* 1 if debugging H8/300H application */ +extern int h8300hmode; +extern int h8300smode; + +/* Number of bytes in a word */ + +#define BINWORD (h8300hmode?4:2) + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs *fsr; \ + CORE_ADDR from_pc; \ + CORE_ADDR args_pointer;\ + CORE_ADDR locals_pointer ; + +/* Zero the frame_saved_regs pointer when the frame is initialized, + so that FRAME_FIND_SAVED_REGS () will know to allocate and + initialize a frame_saved_regs struct the first time it is called. + Set the arg_pointer to -1, which is not valid; 0 and other values + indicate real, cached values. */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + h8300_init_extra_frame_info (fromleaf, fi) + +extern void h8300_init_extra_frame_info (); + +#define IEEE_FLOAT +/* Define the bit, byte, and word ordering of the machine. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN +#undef TARGET_INT_BIT +#define TARGET_INT_BIT 16 +#undef TARGET_LONG_BIT +#define TARGET_LONG_BIT 32 +#undef TARGET_PTR_BIT +#define TARGET_PTR_BIT (h8300hmode ? 32:16) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(ip) {(ip) = h8300_skip_prologue(ip);} +extern CORE_ADDR h8300_skip_prologue (); + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + read_memory_unsigned_integer (read_register (SP_REGNUM), BINWORD) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/*#define BREAKPOINT {0x7A, 0xFF}*/ +#define BREAKPOINT {0x01, 0x80} /* Sleep */ +#define REMOTE_BREAKPOINT { 0x57, 0x30} /* trapa #3 */ +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long registers are. */ + +#define REGISTER_SIZE 4 + +#define NUM_REGS 13 + +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the H8/300, all regs are 2 bytes. */ + +#define REGISTER_RAW_SIZE(N) (h8300hmode ? 4 : 2) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) (h8300hmode ? 4 : 2) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ +(h8300hmode ? builtin_type_unsigned_long : builtin_type_unsigned_short) + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +#define REGISTER_NAMES \ + {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp", "ccr","pc","cycles","tick","inst"} + +/* An array of names of registers. */ + +extern char **h8300_register_names; +#define REGISTER_NAME(i) h8300_register_names[i] + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define ARG0_REGNUM 0 /* first reg in which an arg may be passed */ +#define ARGLAST_REGNUM 2 /* last reg in which an arg may be passed */ +#define FP_REGNUM 6 /* Contain saddress of executing stack frame */ +#define SP_REGNUM 7 /* Contains address of top of stack */ +#define CCR_REGNUM 8 /* Contains processor status */ +#define PC_REGNUM 9 /* Contains program counter */ + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +/* FIXME: Won't work with both h8/300's. */ + +extern void h8300_extract_return_value PARAMS((struct type *, char *, char *)); +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + h8300_extract_return_value (TYPE, (char *)(REGBUF), (char *)(VALBUF)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. Assumes floats are passed + in d0/d1. */ +/* FIXME: Won't work with both h8/300's. */ + +extern void h8300_store_return_value PARAMS((struct type *, char *)); +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + h8300_store_return_value(TYPE, (char *) (VALBUF)) + +/* struct passing and returning stuff */ +#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \ + write_register (0, STRUCT_ADDR) + +#define USE_STRUCT_CONVENTION(gcc_p, type) (1) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (0), \ + REGISTER_RAW_SIZE (0)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +#define FRAME_CHAIN(FRAME) h8300_frame_chain(FRAME) +CORE_ADDR h8300_frame_chain PARAMS ((struct frame_info *)); + +/* In the case of the H8/300, the frame's nominal address + is the address of a 2-byte word containing the calling frame's address. */ + +/* Use the alternate method of avoiding running up off the end of + the frame chain or following frames back into the startup code. + See the comments in objfile.h */ + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +/* Any function with a frame looks like this + SECOND ARG + FIRST ARG + RET PC + SAVED R2 + SAVED R3 + SAVED FP <-FP POINTS HERE + LOCALS0 + LOCALS1 <-SP POINTS HERE + */ + +#define FRAME_SAVED_PC(FRAME) h8300_frame_saved_pc(FRAME) + +#define FRAME_ARGS_ADDRESS(fi) frame_args_address(fi) + +#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address(fi); + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + h8300_frame_find_saved_regs(frame_info, &(frame_saved_regs)) + + +typedef unsigned short INSN_WORD; + + +#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno) + +#define GDB_TARGET_IS_H8300 + +#define NUM_REALREGS 10 +#define NOP { 0x01, 0x80} /* A sleep insn */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* + * CALL_DUMMY stuff: + */ + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_LENGTH (0) +#define CALL_DUMMY_ADDRESS() entry_point_address () +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) + +extern CORE_ADDR h8300_push_arguments PARAMS ((int nargs, + struct value **args, + CORE_ADDR sp, + unsigned char struct_return, + CORE_ADDR struct_addr)); +extern CORE_ADDR h8300_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) +#define FIX_CALL_DUMMY(DUMMY, START_SP, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = h8300_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) +/* Push an empty stack frame, to record the current PC, etc. */ +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () +/* Discard from the stack the innermost frame, restoring all registers. */ +#define POP_FRAME h8300_pop_frame () +#define PUSH_RETURN_ADDRESS(PC, SP) h8300_push_return_address (PC, SP) + +/* override the standard get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + + diff --git a/gdb/config/h8500/h8500.mt b/gdb/config/h8500/h8500.mt new file mode 100644 index 0000000..35f6b4d --- /dev/null +++ b/gdb/config/h8500/h8500.mt @@ -0,0 +1,6 @@ +# Target: H8500 with HMS monitor and H8 simulator +TDEPFILES= h8500-tdep.o monitor.o remote-hms.o dsrec.o +TM_FILE= tm-h8500.h + +SIM_OBS = remote-sim.o +SIM = ../sim/h8500/libsim.a diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h new file mode 100644 index 0000000..8f7d966 --- /dev/null +++ b/gdb/config/h8500/tm-h8500.h @@ -0,0 +1,293 @@ +/* Parameters for execution on a H8/500 series machine. + Copyright (C) 1993, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Contributed by Steve Chamberlain sac@cygnus.com */ + +#define GDB_TARGET_IS_H8500 + +#define IEEE_FLOAT 1 + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Define the sizes of integers and pointers. */ + +#define TARGET_INT_BIT 16 + +#define TARGET_LONG_BIT 32 + +#define TARGET_PTR_BIT (minimum_mode ? 16 : 32) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(ip) { (ip) = h8500_skip_prologue(ip); } +extern CORE_ADDR h8500_skip_prologue PARAMS ((CORE_ADDR)); + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call() +extern CORE_ADDR saved_pc_after_call PARAMS ((void)); + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Illegal instruction - used by the simulator for breakpoint + detection */ + +#define BREAKPOINT {0x0b} + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long registers are. */ + +#define REGISTER_TYPE unsigned long + +/* Say how much memory is needed to store a copy of the register set */ + +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) h8500_register_size(N) +extern int h8500_register_size PARAMS ((int regno)); + +#define REGISTER_SIZE 4 + +#define REGISTER_VIRTUAL_SIZE(N) h8500_register_size(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) h8500_register_virtual_type(N) +extern struct type *h8500_register_virtual_type PARAMS ((int regno)); + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +#define REGISTER_NAMES \ + { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "pr0","pr1","pr2","pr3","pr4","pr5","pr6","pr7", \ + "cp", "dp", "ep", "tp", "sr", "pc"} + +/* Register numbers of various important registers. Note that some of + these values are "real" register numbers, and correspond to the + general registers of the machine, and some are "phony" register + numbers which are too large to be actual register numbers as far as + the user is concerned but do serve to get the desired values when + passed to read_register. */ + +#define R0_REGNUM 0 +#define R1_REGNUM 1 +#define R2_REGNUM 2 +#define R3_REGNUM 3 +#define R4_REGNUM 4 +#define R5_REGNUM 5 +#define R6_REGNUM 6 +#define R7_REGNUM 7 + +#define PR0_REGNUM 8 +#define PR1_REGNUM 9 +#define PR2_REGNUM 10 +#define PR3_REGNUM 11 +#define PR4_REGNUM 12 +#define PR5_REGNUM 13 +#define PR6_REGNUM 14 +#define PR7_REGNUM 15 + +#define SEG_C_REGNUM 16 /* Segment registers */ +#define SEG_D_REGNUM 17 +#define SEG_E_REGNUM 18 +#define SEG_T_REGNUM 19 + +#define CCR_REGNUM 20 /* Contains processor status */ +#define PC_REGNUM 21 /* Contains program counter */ + +#define NUM_REGS 22 + +#define SP_REGNUM PR7_REGNUM /* Contains address of top of stack */ +#define FP_REGNUM PR6_REGNUM /* Contains address of executing stack frame */ + +#define PTR_SIZE (minimum_mode ? 2 : 4) +#define PTR_MASK (minimum_mode ? 0x0000ffff : 0x00ffffff) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +/*#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (0, (ADDR)); abort(); }*/ + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) + + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +/* Any function with a frame looks like this + SECOND ARG + FIRST ARG + RET PC + SAVED R2 + SAVED R3 + SAVED FP <-FP POINTS HERE + LOCALS0 + LOCALS1 <-SP POINTS HERE + + */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) ; +/* (fci)->frame |= read_register(SEG_T_REGNUM) << 16;*/ + +#define FRAME_CHAIN(FRAME) h8500_frame_chain(FRAME) +struct frame_info; +extern CORE_ADDR h8500_frame_chain PARAMS ((struct frame_info *)); + +#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME) +extern CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *frame)); + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + frame_find_saved_regs(frame_info, &(frame_saved_regs)) +struct frame_saved_regs; +extern void frame_find_saved_regs PARAMS ((struct frame_info *frame_info, struct frame_saved_regs *frame_saved_regs)); + + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME { h8500_pop_frame (); } +extern void h8500_pop_frame PARAMS ((void)); + +#define SHORT_INT_MAX 32767 +#define SHORT_INT_MIN -32768 + +#define NAMES_HAVE_UNDERSCORE + +typedef unsigned short INSN_WORD; + +extern CORE_ADDR h8500_addr_bits_remove PARAMS ((CORE_ADDR)); +#define ADDR_BITS_REMOVE(addr) h8500_addr_bits_remove (addr) + +#define read_memory_short(x) (read_memory_integer(x,2) & 0xffff) + +#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno) +extern void print_register_hook PARAMS ((int)); + +extern int minimum_mode; + +#define CALL_DUMMY_LENGTH 10 + +/* Fake variables to make it easy to use 24 bit register pointers */ + +#define IS_TRAPPED_INTERNALVAR h8500_is_trapped_internalvar +extern int h8500_is_trapped_internalvar PARAMS ((char *name)); + +#define VALUE_OF_TRAPPED_INTERNALVAR h8500_value_of_trapped_internalvar +extern struct value * h8500_value_of_trapped_internalvar (/* struct internalvar *var */); + +#define SET_TRAPPED_INTERNALVAR h8500_set_trapped_internalvar +extern void h8500_set_trapped_internalvar (/* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */); + +extern CORE_ADDR h8500_read_sp PARAMS ((void)); +extern void h8500_write_sp PARAMS ((CORE_ADDR)); + +extern CORE_ADDR h8500_read_fp PARAMS ((void)); +extern void h8500_write_fp PARAMS ((CORE_ADDR)); + +extern CORE_ADDR h8500_read_pc PARAMS ((int)); +extern void h8500_write_pc PARAMS ((CORE_ADDR, int)); + +#define TARGET_READ_SP() h8500_read_sp() +#define TARGET_WRITE_SP(x) h8500_write_sp(x) + +#define TARGET_READ_PC(pid) h8500_read_pc(pid) +#define TARGET_WRITE_PC(x,pid) h8500_write_pc(x,pid) + +#define TARGET_READ_FP() h8500_read_fp() +#define TARGET_WRITE_FP(x) h8500_write_fp(x) diff --git a/gdb/config/i386/cygwin.mh b/gdb/config/i386/cygwin.mh new file mode 100644 index 0000000..d93acb6 --- /dev/null +++ b/gdb/config/i386/cygwin.mh @@ -0,0 +1,6 @@ +MH_CFLAGS= +XM_FILE=xm-cygwin.h +XDEPFILES=ser-tcp.o +NATDEPFILES= win32-nat.o +NAT_FILE=../nm-empty.h +XM_CLIBS= diff --git a/gdb/config/i386/cygwin.mt b/gdb/config/i386/cygwin.mt new file mode 100644 index 0000000..4dfc0c2 --- /dev/null +++ b/gdb/config/i386/cygwin.mt @@ -0,0 +1,6 @@ +# Target: Intel 386 run win32 +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-cygwin.h + + + diff --git a/gdb/config/i386/fbsd.mh b/gdb/config/i386/fbsd.mh new file mode 100644 index 0000000..499ed48 --- /dev/null +++ b/gdb/config/i386/fbsd.mh @@ -0,0 +1,5 @@ +# Host: Intel 386 running FreeBSD +XDEPFILES= ser-tcp.o +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o core-aout.o i386b-nat.o +XM_FILE= xm-i386bsd.h +NAT_FILE= nm-fbsd.h diff --git a/gdb/config/i386/fbsd.mt b/gdb/config/i386/fbsd.mt new file mode 100644 index 0000000..e644f1c --- /dev/null +++ b/gdb/config/i386/fbsd.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running FreeBSD +TDEPFILES= i386-tdep.o i387-tdep.o solib.o +TM_FILE= tm-fbsd.h diff --git a/gdb/config/i386/gdbserve.mt b/gdb/config/i386/gdbserve.mt new file mode 100644 index 0000000..d8a7cba --- /dev/null +++ b/gdb/config/i386/gdbserve.mt @@ -0,0 +1,3 @@ +# Target: GDBSERVE.NLM running on a i386 +TDEPFILES= i386.o +CPU_FILE= i386 diff --git a/gdb/config/i386/go32.mh b/gdb/config/i386/go32.mh new file mode 100644 index 0000000..311ee1c --- /dev/null +++ b/gdb/config/i386/go32.mh @@ -0,0 +1,8 @@ +MH_CFLAGS=-D__GO32__ -D__MSDOS__ +XDEPFILES= go32-xdep.o +XM_FILE= xm-go32.h +HOST_IPC=-DDOS_IPC +SER_HARDWIRE= ser-go32.o +CC=i386-go32-gcc -O2 -fno-omit-frame-pointer + + diff --git a/gdb/config/i386/i386aix.mh b/gdb/config/i386/i386aix.mh new file mode 100644 index 0000000..cea05f0 --- /dev/null +++ b/gdb/config/i386/i386aix.mh @@ -0,0 +1,10 @@ +# Host: IBM PS/2 (i386) running AIX PS/2 + +XM_FILE= xm-i386aix.h +XDEPFILES= + +NAT_FILE= nm-i386aix.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o i386aix-nat.o + +# Use gcc. Only coff output can be debugged +CC=gcc diff --git a/gdb/config/i386/i386aix.mt b/gdb/config/i386/i386aix.mt new file mode 100644 index 0000000..12e0e1f --- /dev/null +++ b/gdb/config/i386/i386aix.mt @@ -0,0 +1,7 @@ +# This port, for aix ps/2 (i386), will allow you to debug the coff +# output generated gcc-2.3.3 + gas. It will not understand IBM's +# proprietary debug info. +# +# Target: IBM PS/2 (i386) running AIX PS/2 +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386aix.h diff --git a/gdb/config/i386/i386aout.mt b/gdb/config/i386/i386aout.mt new file mode 100644 index 0000000..1c94ba5 --- /dev/null +++ b/gdb/config/i386/i386aout.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 with a.out +TDEPFILES= i386-tdep.o +TM_FILE= tm-i386v.h diff --git a/gdb/config/i386/i386bsd.mh b/gdb/config/i386/i386bsd.mh new file mode 100644 index 0000000..f95c6ed --- /dev/null +++ b/gdb/config/i386/i386bsd.mh @@ -0,0 +1,7 @@ +# Host: Intel 386 running 386BSD + +XM_FILE= xm-i386bsd.h +XDEPFILES= + +NAT_FILE= nm-i386bsd.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o core-aout.o i386b-nat.o diff --git a/gdb/config/i386/i386bsd.mt b/gdb/config/i386/i386bsd.mt new file mode 100644 index 0000000..ef61731 --- /dev/null +++ b/gdb/config/i386/i386bsd.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running BSD +TM_FILE= tm-i386bsd.h +TDEPFILES= i386-tdep.o diff --git a/gdb/config/i386/i386dgux.mh b/gdb/config/i386/i386dgux.mh new file mode 100644 index 0000000..e05ebcd --- /dev/null +++ b/gdb/config/i386/i386dgux.mh @@ -0,0 +1,9 @@ +# Host: Intel 386 running DGUX, cloned from SVR4 + +XM_FILE= xm-i386v4.h +XDEPFILES= ser-tcp.o +# for network communication +XM_CLIBS= -lsocket -lnsl + +NAT_FILE= nm-i386v4.h +NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o diff --git a/gdb/config/i386/i386gnu.mh b/gdb/config/i386/i386gnu.mh new file mode 100644 index 0000000..4ceac7e --- /dev/null +++ b/gdb/config/i386/i386gnu.mh @@ -0,0 +1,31 @@ +# Host: Intel 386 running the GNU Hurd +XDEPFILES= i387-tdep.o +NATDEPFILES= i386gnu-nat.o gnu-nat.o fork-child.o solib.o corelow.o notify_S.o process_reply_S.o msg_reply_S.o msg_U.o exc_request_U.o exc_request_S.o +XM_FILE= xm-i386gnu.h +NAT_FILE= nm-gnu.h +MH_CFLAGS = -D_GNU_SOURCE + +XM_CLIBS = -lshouldbeinlibc + +# Use our own user stubs for the msg rpcs, so we can make them time out, in +# case the program is fucked, or we guess the wrong signal thread. +msg-MIGUFLAGS = -D'MSG_IMPORTS=waittime 1000;' + +# ick +MIG = mig +MIGCOM = $(MIG) -cc cat - /dev/null + +# Reply servers need special massaging of the code mig generates, to make +# them work correctly for error returns in some cases. +%_reply_S.h %_reply_S.c: %_reply.defs + $(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \ + | $(MIGCOM) -sheader $*_reply_S.h -server $*_reply_S.raw -user /dev/null -header /dev/null \ + && $(AWK) -f $(srcdir)/reply_mig_hack.awk < $*_reply_S.raw > $*_reply_S.c +# Normal servers +%_S.h %_S.c: %.defs + $(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \ + | $(MIGCOM) -sheader $*_S.h -server $*_S.c -user /dev/null -header /dev/null +# User rpc stubs +%_U.h %_U.c: %.defs + $(CPP) $(CPPFLAGS) $($*-MIGUFLAGS) -x c $< \ + | $(MIGCOM) -sheader /dev/null -server /dev/null -user $*_U.c -header $*_U.h diff --git a/gdb/config/i386/i386gnu.mt b/gdb/config/i386/i386gnu.mt new file mode 100644 index 0000000..64fb018 --- /dev/null +++ b/gdb/config/i386/i386gnu.mt @@ -0,0 +1,3 @@ +# Target: Intel 386/elf/GNU Hurd +TDEPFILES= i386-tdep.o +TM_FILE= tm-i386gnu.h diff --git a/gdb/config/i386/i386lynx.mh b/gdb/config/i386/i386lynx.mh new file mode 100644 index 0000000..9cb086f --- /dev/null +++ b/gdb/config/i386/i386lynx.mh @@ -0,0 +1,11 @@ +# Host: Intel 386 running LynxOS + +XM_FILE= xm-i386lynx.h +XM_CLIBS= -lbsd +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-i386lynx.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o + +GDBSERVER_LIBS= -lbsd +GDBSERVER_DEPFILES= low-lynx.o diff --git a/gdb/config/i386/i386lynx.mt b/gdb/config/i386/i386lynx.mt new file mode 100644 index 0000000..6704b43 --- /dev/null +++ b/gdb/config/i386/i386lynx.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running LynxOS +TDEPFILES= coff-solib.o i386-tdep.o i386ly-tdep.o +TM_FILE= tm-i386lynx.h diff --git a/gdb/config/i386/i386m3.mh b/gdb/config/i386/i386m3.mh new file mode 100644 index 0000000..0a83ebf --- /dev/null +++ b/gdb/config/i386/i386m3.mh @@ -0,0 +1,7 @@ +# Host: Intel 386 running Mach3 + +XDEPFILES= i387-tdep.o core-aout.o +NATDEPFILES= i386m3-nat.o m3-nat.o fork-child.o +NAT_CLIBS= -lmachid -lnetname -lmach +XM_FILE= xm-i386m3.h +NAT_FILE= nm-m3.h diff --git a/gdb/config/i386/i386m3.mt b/gdb/config/i386/i386m3.mt new file mode 100644 index 0000000..e985ae3 --- /dev/null +++ b/gdb/config/i386/i386m3.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 with a.out under Mach 3 +TDEPFILES= i386-tdep.o +TM_FILE= tm-i386m3.h diff --git a/gdb/config/i386/i386mach.mh b/gdb/config/i386/i386mach.mh new file mode 100644 index 0000000..44766c5 --- /dev/null +++ b/gdb/config/i386/i386mach.mh @@ -0,0 +1,10 @@ +# Host: Intel 386 running Mach + +# This is for mach2, maybe, or is obsolete (and seems to have only +# host and native, not target). Once we get the mach3 stuff working, +# I think it can go away. + +XDEPFILES= +XM_FILE= xm-i386mach.h +NAT_FILE= nm-i386mach.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o i386mach-nat.o diff --git a/gdb/config/i386/i386mk.mh b/gdb/config/i386/i386mk.mh new file mode 100644 index 0000000..849677c --- /dev/null +++ b/gdb/config/i386/i386mk.mh @@ -0,0 +1,4 @@ +# Host: Intel 386 running Mach3 with OSF 1/MK + +XDEPFILES= os-mach3.o i386mach3-xdep.o i387-tdep.o +XM_FILE= xm-i386osf1mk.h diff --git a/gdb/config/i386/i386mk.mt b/gdb/config/i386/i386mk.mt new file mode 100644 index 0000000..fc59442 --- /dev/null +++ b/gdb/config/i386/i386mk.mt @@ -0,0 +1,6 @@ +# Target: Intel 386 with a.out in osf 1/mk +TDEPFILES= i386-tdep.o +TM_FILE= tm-i386osf1mk.h + +TM_CFLAGS= -I/usr/mach3/include +TM_CLIBS= /usr/mach3/ccs/lib/libmachid.a /usr/mach3/ccs/lib/libnetname.a /usr/mach3/ccs/lib/libmach.a diff --git a/gdb/config/i386/i386nw.mt b/gdb/config/i386/i386nw.mt new file mode 100644 index 0000000..3109c42 --- /dev/null +++ b/gdb/config/i386/i386nw.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running NetWare +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386nw.h diff --git a/gdb/config/i386/i386os9k.mt b/gdb/config/i386/i386os9k.mt new file mode 100644 index 0000000..5a8794d --- /dev/null +++ b/gdb/config/i386/i386os9k.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running OS9000 +TDEPFILES= i386-tdep.o remote-os9k.o +TM_FILE= tm-i386os9k.h diff --git a/gdb/config/i386/i386sco.mh b/gdb/config/i386/i386sco.mh new file mode 100644 index 0000000..69076b5 --- /dev/null +++ b/gdb/config/i386/i386sco.mh @@ -0,0 +1,13 @@ +# Host: Intel 386 running SCO Unix (pre-SVR4) + +XM_FILE= xm-i386sco.h +XDEPFILES= +XM_CLIBS= -lPW + +NAT_FILE= nm-i386sco.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o + +#msg The SCO C compiler cannot parse symtab.h when value.h has been included. +#msg This is a bug in the compiler; the code is valid. +#msg Therefore, you must use GCC to compile GDB on SCO machines. +CC=gcc -D_POSIX_SOURCE=1 diff --git a/gdb/config/i386/i386sco4.mh b/gdb/config/i386/i386sco4.mh new file mode 100644 index 0000000..a13f993 --- /dev/null +++ b/gdb/config/i386/i386sco4.mh @@ -0,0 +1,12 @@ +# Host: Intel 386 running SCO Unix 3.2v4 + +XM_FILE= xm-i386sco.h +XDEPFILES= +XM_CLIBS= -lPW + +NAT_FILE= nm-i386sco4.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o + +# The cc compiler mishandles const in cases like +# struct type ** const (c_builtin_types[]) = +MH_CFLAGS=-Dconst= diff --git a/gdb/config/i386/i386sco5.mh b/gdb/config/i386/i386sco5.mh new file mode 100644 index 0000000..3bea87a --- /dev/null +++ b/gdb/config/i386/i386sco5.mh @@ -0,0 +1,17 @@ +# Host: Intel 386 running SCO OpenServer 5 +# Much like 3.2v4, except we don't have to avoid problems with const + +XM_FILE= xm-i386sco.h + +# +# Not all configurations of SCO OpenServer 5 come with the TCP/IP +# runtime, but all come with the development system, so we always +# have socket(), gethostbyname(), and friends. +# +XDEPFILES= ser-tcp.o +XM_CLIBS= -lPW -lsocket + +NAT_FILE= nm-i386sco5.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corefile.o core-aout.o \ + corelow.o i386v-nat.o solib.o + diff --git a/gdb/config/i386/i386sco5.mt b/gdb/config/i386/i386sco5.mt new file mode 100644 index 0000000..54dc68d --- /dev/null +++ b/gdb/config/i386/i386sco5.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running SCO Open Server 5 +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386sco5.h diff --git a/gdb/config/i386/i386sol2.mh b/gdb/config/i386/i386sol2.mh new file mode 100644 index 0000000..ff24294 --- /dev/null +++ b/gdb/config/i386/i386sol2.mh @@ -0,0 +1,7 @@ +# Host: Intel 386 running Solaris 2 (SVR4) + +XM_FILE= xm-i386v4.h +XDEPFILES= + +NAT_FILE= nm-i386sol2.h +NATDEPFILES= core-regset.o procfs.o fork-child.o i386v4-nat.o corelow.o diff --git a/gdb/config/i386/i386sol2.mt b/gdb/config/i386/i386sol2.mt new file mode 100644 index 0000000..80b576f --- /dev/null +++ b/gdb/config/i386/i386sol2.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running SVR4 +TDEPFILES= i386-tdep.o i387-tdep.o solib.o +TM_FILE= tm-i386sol2.h diff --git a/gdb/config/i386/i386v.mh b/gdb/config/i386/i386v.mh new file mode 100644 index 0000000..d67a30f --- /dev/null +++ b/gdb/config/i386/i386v.mh @@ -0,0 +1,8 @@ +# Host: Intel 386 running System V + +XM_FILE= xm-i386v.h +XDEPFILES= +XM_CLIBS= -lPW + +NAT_FILE= nm-i386v.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o diff --git a/gdb/config/i386/i386v.mt b/gdb/config/i386/i386v.mt new file mode 100644 index 0000000..7242d3e --- /dev/null +++ b/gdb/config/i386/i386v.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running System V +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386v.h diff --git a/gdb/config/i386/i386v32.mh b/gdb/config/i386/i386v32.mh new file mode 100644 index 0000000..5b4175f --- /dev/null +++ b/gdb/config/i386/i386v32.mh @@ -0,0 +1,9 @@ +# Host: Intel 386 running System V release 3.2 + +XM_FILE= xm-i386v32.h +XDEPFILES= +XM_CLIBS= -lPW + +NAT_FILE= nm-i386v.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o + diff --git a/gdb/config/i386/i386v4.mh b/gdb/config/i386/i386v4.mh new file mode 100644 index 0000000..4653887 --- /dev/null +++ b/gdb/config/i386/i386v4.mh @@ -0,0 +1,9 @@ +# Host: Intel 386 running SVR4 + +XM_FILE= xm-i386v4.h +XDEPFILES= +# for network communication +XM_CLIBS= -lsocket -lnsl + +NAT_FILE= nm-i386v4.h +NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o diff --git a/gdb/config/i386/i386v4.mt b/gdb/config/i386/i386v4.mt new file mode 100644 index 0000000..c22b675 --- /dev/null +++ b/gdb/config/i386/i386v4.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running SVR4 +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386v4.h diff --git a/gdb/config/i386/i386v42mp.mh b/gdb/config/i386/i386v42mp.mh new file mode 100644 index 0000000..94b6c06 --- /dev/null +++ b/gdb/config/i386/i386v42mp.mh @@ -0,0 +1,11 @@ +# Host: Intel 386 running SVR4 + +XM_FILE= xm-i386v4.h +XDEPFILES= +# for network communication +XM_CLIBS= -lsocket -lnsl + +# we don't want nm-i386v4.h since that defines LOSING_POLL which isn't +# appropriate for i386v42mp +NAT_FILE= nm-i386v42mp.h +NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o diff --git a/gdb/config/i386/i386v42mp.mt b/gdb/config/i386/i386v42mp.mt new file mode 100644 index 0000000..0b2dea8 --- /dev/null +++ b/gdb/config/i386/i386v42mp.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running SVR4.2MP +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-i386v42mp.h diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh new file mode 100644 index 0000000..30de91d --- /dev/null +++ b/gdb/config/i386/linux.mh @@ -0,0 +1,7 @@ +# Host: Intel 386 running GNU/Linux + +XM_FILE= xm-linux.h +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-linux.h +NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o core-aout.o core-regset.o i386v-nat.o i386v4-nat.o diff --git a/gdb/config/i386/linux.mt b/gdb/config/i386/linux.mt new file mode 100644 index 0000000..66cc97d --- /dev/null +++ b/gdb/config/i386/linux.mt @@ -0,0 +1,5 @@ +# Target: Intel 386 running GNU/Linux +TDEPFILES= i386-tdep.o i387-tdep.o +TM_FILE= tm-linux.h + +GDBSERVER_DEPFILES= low-linux.o diff --git a/gdb/config/i386/nbsd.mh b/gdb/config/i386/nbsd.mh new file mode 100644 index 0000000..c76b897 --- /dev/null +++ b/gdb/config/i386/nbsd.mh @@ -0,0 +1,5 @@ +# Host: Intel 386 running NetBSD +XDEPFILES= ser-tcp.o +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o i386b-nat.o +XM_FILE= xm-nbsd.h +NAT_FILE= nm-nbsd.h diff --git a/gdb/config/i386/nbsd.mt b/gdb/config/i386/nbsd.mt new file mode 100644 index 0000000..7570850 --- /dev/null +++ b/gdb/config/i386/nbsd.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running NetBSD +TDEPFILES= i386-tdep.o i387-tdep.o solib.o +TM_FILE= tm-nbsd.h diff --git a/gdb/config/i386/ncr3000.mh b/gdb/config/i386/ncr3000.mh new file mode 100644 index 0000000..4f60756 --- /dev/null +++ b/gdb/config/i386/ncr3000.mh @@ -0,0 +1,16 @@ +# Host: NCR 3000 (Intel 386 running SVR4) + +# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc. +# This compiler not only emits obnoxious copyright messages every time +# you run it, but it chokes and dies on a whole bunch of GNU source +# files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc. +# Unfortunately though, the AT&T compiler sometimes generates code that +# the assembler barfs on if -g is used, so disable it by default as well. +CC = /usr/ccs/ATT/cc +CFLAGS = + +XM_FILE= xm-i386v4.h +XDEPFILES= + +NAT_FILE= nm-i386v4.h +NATDEPFILES= corelow.o core-regset.o procfs.o fork-child.o i386v4-nat.o diff --git a/gdb/config/i386/ncr3000.mt b/gdb/config/i386/ncr3000.mt new file mode 100644 index 0000000..0bbf9b3 --- /dev/null +++ b/gdb/config/i386/ncr3000.mt @@ -0,0 +1,3 @@ +# Target: Intel 386 running SVR4 +TDEPFILES= i386-tdep.o i387-tdep.o solib.o +TM_FILE= tm-i386v4.h diff --git a/gdb/config/i386/nm-fbsd.h b/gdb/config/i386/nm-fbsd.h new file mode 100644 index 0000000..727623c --- /dev/null +++ b/gdb/config/i386/nm-fbsd.h @@ -0,0 +1,98 @@ +/* Native-dependent definitions for Intel 386 running BSD Unix, for GDB. + Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_FREEBSD_H +#define NM_FREEBSD_H + +/* Be shared lib aware */ +#include "solib.h" + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#include <machine/vmparam.h> +#define KERNEL_U_ADDR USRSTACK + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = i386_register_u_addr ((blockend),(regno)); + +extern int +i386_register_u_addr PARAMS ((int, int)); + +#define PTRACE_ARG3_TYPE char* + +/* make structure definitions match up with those expected in solib.c */ +#define link_object sod +#define lo_name sod_name +#define lo_library sod_library +#define lo_unused sod_reserved +#define lo_major sod_major +#define lo_minor sod_minor +#define lo_next sod_next + +#define link_map so_map +#define lm_addr som_addr +#define lm_name som_path +#define lm_next som_next +#define lm_lop som_sod +#define lm_lob som_sodbase +#define lm_rwt som_write +#define lm_ld som_dynamic +#define lm_lpd som_spd + +#define link_dynamic_2 section_dispatch_table +#define ld_loaded sdt_loaded +#define ld_need sdt_sods +#define ld_rules sdt_filler1 +#define ld_got sdt_got +#define ld_plt sdt_plt +#define ld_rel sdt_rel +#define ld_hash sdt_hash +#define ld_stab sdt_nzlist +#define ld_stab_hash sdt_filler2 +#define ld_buckets sdt_buckets +#define ld_symbols sdt_strings +#define ld_symb_size sdt_str_sz +#define ld_text sdt_text_sz +#define ld_plt_sz sdt_plt_sz + +#define rtc_symb rt_symbol +#define rtc_sp rt_sp +#define rtc_next rt_next + +#define ld_debug so_debug +#define ldd_version dd_version +#define ldd_in_debugger dd_in_debugger +#define ldd_sym_loaded dd_sym_loaded +#define ldd_bp_addr dd_bpt_addr +#define ldd_bp_inst dd_bpt_shadow +#define ldd_cp dd_cc + +#define link_dynamic _dynamic +#define ld_version d_version +#define ldd d_debug +#define ld_un d_un +#define ld_2 d_sdt + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); + +#endif /* NM_FREEBSD_H */ diff --git a/gdb/config/i386/nm-gnu.h b/gdb/config/i386/nm-gnu.h new file mode 100644 index 0000000..95f25a5 --- /dev/null +++ b/gdb/config/i386/nm-gnu.h @@ -0,0 +1,22 @@ +/* Native-dependent definitions for Intel 386 running the GNU Hurd + Copyright 1994, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include the generic hurd definitions. */ + +#include "nm-gnu.h" diff --git a/gdb/config/i386/nm-i386aix.h b/gdb/config/i386/nm-i386aix.h new file mode 100644 index 0000000..4240393 --- /dev/null +++ b/gdb/config/i386/nm-i386aix.h @@ -0,0 +1,42 @@ +/* Native support for i386 aix ps/2. + Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Changes for IBM AIX PS/2 by Minh Tran-Le (tranle@intellicorp.com) + * Revision: 5-May-93 00:11:35 + */ + +#ifndef NM_I386AIX_H +#define NM_I386AIX_H 1 + +/* code to execute to print interesting information about the + * floating point processor (if any) + * No need to define if there is nothing to do. + */ +#define FLOAT_INFO { i386_float_info (); } + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ +#undef KERNEL_U_ADDR +#define KERNEL_U_ADDR 0xf03fd000 + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS + +#endif /* NM_I386AIX_H */ diff --git a/gdb/config/i386/nm-i386bsd.h b/gdb/config/i386/nm-i386bsd.h new file mode 100644 index 0000000..7366f2d --- /dev/null +++ b/gdb/config/i386/nm-i386bsd.h @@ -0,0 +1,39 @@ +/* Native-dependent definitions for Intel 386 running BSD Unix, for GDB. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_I386BSD_H +#define NM_I386BSD_H + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#include <machine/vmparam.h> +#define KERNEL_U_ADDR USRSTACK + +#undef FLOAT_INFO /* No float info yet */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = i386_register_u_addr ((blockend),(regno)); + +extern int +i386_register_u_addr PARAMS ((int, int)); + +#define PTRACE_ARG3_TYPE char* + +#endif /* NM_I386BSD_H */ diff --git a/gdb/config/i386/nm-i386lynx.h b/gdb/config/i386/nm-i386lynx.h new file mode 100644 index 0000000..e29821f --- /dev/null +++ b/gdb/config/i386/nm-i386lynx.h @@ -0,0 +1,25 @@ +/* Native-dependent definitions for Intel 386 running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_I386LYNX_H +#define NM_I386LYNX_H + +#include "nm-lynx.h" + +#endif /* NM_I386LYNX_H */ diff --git a/gdb/config/i386/nm-i386mach.h b/gdb/config/i386/nm-i386mach.h new file mode 100644 index 0000000..f01d2b1 --- /dev/null +++ b/gdb/config/i386/nm-i386mach.h @@ -0,0 +1,26 @@ +/* Native definitions for Mach on an Intel 386 + Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ +/* #define ATTACH_DETACH 1 */ + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) diff --git a/gdb/config/i386/nm-i386sco.h b/gdb/config/i386/nm-i386sco.h new file mode 100644 index 0000000..33ab6de --- /dev/null +++ b/gdb/config/i386/nm-i386sco.h @@ -0,0 +1,41 @@ +/* Native support for i386. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if 0 +/* code to execute to print interesting information about the + floating point processor (if any) + No need to define if there is nothing to do. + On the 386, unfortunately this code is host-dependent (and lives + in the i386-xdep.c file), so we can't + do this unless we *know* we aren't cross-debugging. FIXME. + */ +#define FLOAT_INFO { i386_float_info (); } +#endif /*0*/ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = i386_register_u_addr ((blockend),(regno)); + +extern int +i386_register_u_addr PARAMS ((int, int)); + +/* When calling functions on SCO, sometimes we get an error writing some + of the segment registers. This would appear to be a kernel + bug/non-feature. */ +#define CANNOT_STORE_REGISTER(regno) ((regno) == 14 || (regno) == 15) diff --git a/gdb/config/i386/nm-i386sco4.h b/gdb/config/i386/nm-i386sco4.h new file mode 100644 index 0000000..41daef5 --- /dev/null +++ b/gdb/config/i386/nm-i386sco4.h @@ -0,0 +1,32 @@ +/* Native support for SCO 3.2v4. + Copyright 1993 Free Software Foundation, Inc. + Contributed by Cygnus Support. By Ian Lance Taylor + <ian@cygnus.com> based on work by Martin Walker <maw@netcom.com>. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* SCO 3.2v4 is actually just like SCO 3.2v2, except that it + additionally supports attaching to a process. */ + +#include "i386/nm-i386sco.h" + +#define ATTACH_DETACH + +/* SCO, in its wisdom, does not provide <sys/ptrace.h>. infptrace.c + does not have defaults for these values. */ +#define PTRACE_ATTACH 10 +#define PTRACE_DETACH 11 diff --git a/gdb/config/i386/nm-i386sco5.h b/gdb/config/i386/nm-i386sco5.h new file mode 100644 index 0000000..10e749b --- /dev/null +++ b/gdb/config/i386/nm-i386sco5.h @@ -0,0 +1,39 @@ +/* Native support for SCO OpenServer 5 + Copyright 1996, 1998 Free Software Foundation, Inc. + Re-written by J. Kean Johnston <jkj@sco.com>. + Originally written by Robert Lipe <robertl@dgii.com>, based on + work by Ian Lance Taylor <ian@cygnus.com> and + Martin Walker <maw@netcom.com>. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* Basically, its a lot like the older versions ... */ +#include "i386/nm-i386sco.h" + +/* ... but it can do a lot of SVR4 type stuff too. */ +#define SVR4_SHARED_LIBS +#include "solib.h" /* Pick up shared library support */ + +#define ATTACH_DETACH + +/* SCO does not provide <sys/ptrace.h>. infptrace.c does not + have defaults for these values. */ + +#define PTRACE_ATTACH 10 +#define PTRACE_DETACH 11 + + diff --git a/gdb/config/i386/nm-i386sol2.h b/gdb/config/i386/nm-i386sol2.h new file mode 100644 index 0000000..2ae966c --- /dev/null +++ b/gdb/config/i386/nm-i386sol2.h @@ -0,0 +1,35 @@ +/* Native support for i386 running Solaris 2. + Copyright 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-sysv4.h" + +#ifdef HAVE_THREAD_DB_LIB + +#ifdef __STDC__ +struct objfile; +#endif + +#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE) + +void sol_thread_new_objfile PARAMS ((struct objfile *objfile)); + +#define FIND_NEW_THREADS sol_find_new_threads +void sol_find_new_threads PARAMS ((void)); + +#endif diff --git a/gdb/config/i386/nm-i386v.h b/gdb/config/i386/nm-i386v.h new file mode 100644 index 0000000..8e6877e --- /dev/null +++ b/gdb/config/i386/nm-i386v.h @@ -0,0 +1,36 @@ +/* Native support for i386. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if 0 +/* code to execute to print interesting information about the + floating point processor (if any) + No need to define if there is nothing to do. + On the 386, unfortunately this code is host-dependent (and lives + in the i386-xdep.c file), so we can't + do this unless we *know* we aren't cross-debugging. FIXME. + */ +#define FLOAT_INFO { i386_float_info (); } +#endif /*0*/ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = i386_register_u_addr ((blockend),(regno)); + +extern int +i386_register_u_addr PARAMS ((int, int)); diff --git a/gdb/config/i386/nm-i386v4.h b/gdb/config/i386/nm-i386v4.h new file mode 100644 index 0000000..8722a40 --- /dev/null +++ b/gdb/config/i386/nm-i386v4.h @@ -0,0 +1,24 @@ +/* Native support for i386 running SVR4. + Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc. + Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-sysv4.h" + +/* Poll causes GDB to hang, at least under Unixware 1.1.2. */ +#define LOSING_POLL diff --git a/gdb/config/i386/nm-i386v42mp.h b/gdb/config/i386/nm-i386v42mp.h new file mode 100644 index 0000000..6ffd128 --- /dev/null +++ b/gdb/config/i386/nm-i386v42mp.h @@ -0,0 +1,22 @@ +/* Native support for i386 running SVR4. + Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc. + Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-sysv4.h" + diff --git a/gdb/config/i386/nm-linux.h b/gdb/config/i386/nm-linux.h new file mode 100644 index 0000000..ad0b8db --- /dev/null +++ b/gdb/config/i386/nm-linux.h @@ -0,0 +1,73 @@ +/* Native support for GNU/Linux, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992, 1996, 1998 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_LINUX_H +#define NM_LINUX_H + +#include "i386/nm-i386v.h" + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); + +/* Tell gdb that we can attach and detach other processes */ +#define ATTACH_DETACH + +#define U_REGS_OFFSET 0 + +/* GNU/Linux supports the 386 hardware debugging registers. */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) 1 + +/* After a watchpoint trap, the PC points to the instruction after + the one that caused the trap. Therefore we don't need to step over it. + But we do need to reset the status register to avoid another trap. */ +#define HAVE_CONTINUABLE_WATCHPOINT + +#define STOPPED_BY_WATCHPOINT(W) \ + i386_stopped_by_watchpoint (inferior_pid) + +/* Use these macros for watchpoint insertion/removal. */ + +#define target_insert_watchpoint(addr, len, type) \ + i386_insert_watchpoint (inferior_pid, addr, len, type) + +#define target_remove_watchpoint(addr, len, type) \ + i386_remove_watchpoint (inferior_pid, addr, len) + +/* We define this if link.h is available, because with ELF we use SVR4 style + shared libraries. */ + +#ifdef HAVE_LINK_H +#define SVR4_SHARED_LIBS +#include "solib.h" /* Support for shared libraries. */ +#endif + +extern CORE_ADDR +i386_stopped_by_watchpoint PARAMS ((int)); +extern int +i386_insert_watchpoint PARAMS ((int pid, CORE_ADDR addr, int len, int rw)); +extern int +i386_remove_watchpoint PARAMS ((int pid, CORE_ADDR addr, int len)); + +#endif /* #ifndef NM_LINUX_H */ diff --git a/gdb/config/i386/nm-m3.h b/gdb/config/i386/nm-m3.h new file mode 100644 index 0000000..5127091 --- /dev/null +++ b/gdb/config/i386/nm-m3.h @@ -0,0 +1,22 @@ +/* Native-dependent definitions for Intel 386 running Mach 3. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include the generic Mach 3 definitions. */ + +#include "nm-m3.h" diff --git a/gdb/config/i386/nm-nbsd.h b/gdb/config/i386/nm-nbsd.h new file mode 100644 index 0000000..b59fec6 --- /dev/null +++ b/gdb/config/i386/nm-nbsd.h @@ -0,0 +1,34 @@ +/* Native-dependent definitions for Intel 386 running NetBSD, for GDB. + Copyright 1986, 1987, 1989, 1992, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_NBSD_H +#define NM_NBSD_H + +/* Get generic NetBSD native definitions. */ +#include "nm-nbsd.h" + +/* #define FLOAT_INFO { i386_float_info(); } */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = i386_register_u_addr ((blockend),(regno)); + +extern int +i386_register_u_addr PARAMS ((int, int)); + +#endif /* NM_NBSD_H */ diff --git a/gdb/config/i386/nm-ptx4.h b/gdb/config/i386/nm-ptx4.h new file mode 100644 index 0000000..5e6cd56 --- /dev/null +++ b/gdb/config/i386/nm-ptx4.h @@ -0,0 +1,62 @@ +/* Definitions to make GDB run on a Sequent Symmetry under ptx + with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-sysv4.h" + +#undef USE_PROC_FS + +#include "nm-symmetry.h" + +#define PTRACE_READ_REGS(pid,regaddr) mptrace (XPT_RREGS, (pid), (regaddr), 0) +#define PTRACE_WRITE_REGS(pid,regaddr) \ + mptrace (XPT_WREGS, (pid), (regaddr), 0) + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* We must fetch all the regs before storing, since we store all at once. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +#define CHILD_WAIT +struct target_waitstatus; +extern int child_wait PARAMS ((int, struct target_waitstatus *)); + +/* + * ptx does attach as of ptx version 2.1. Prior to that, the interface + * exists but does not work. + * + * FIXME: Using attach/detach requires using the ptx MPDEBUGGER + * interface. There are still problems with that, so for now don't + * enable attach/detach. If you turn it on anyway, it will mostly + * work, but has a number of bugs. -fubar, 2/94. + */ +/*#define ATTACH_DETACH 1*/ +#undef ATTACH_DETACH +#define PTRACE_ATTACH XPT_DEBUG +#define PTRACE_DETACH XPT_UNDEBUG +/* + * The following drivel is needed because there are two ptrace-ish + * calls on ptx: ptrace() and mptrace(), each of which does about half + * of the ptrace functions. + */ +#define PTRACE_ATTACH_CALL(pid) ptx_do_attach(pid) +#define PTRACE_DETACH_CALL(pid, signo) ptx_do_detach(pid, signo) diff --git a/gdb/config/i386/nm-sun386.h b/gdb/config/i386/nm-sun386.h new file mode 100644 index 0000000..f7a904b --- /dev/null +++ b/gdb/config/i386/nm-sun386.h @@ -0,0 +1,27 @@ +/* Native support for Sun 386i, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) diff --git a/gdb/config/i386/nm-symmetry.h b/gdb/config/i386/nm-symmetry.h new file mode 100644 index 0000000..80cf097 --- /dev/null +++ b/gdb/config/i386/nm-symmetry.h @@ -0,0 +1,46 @@ +/* Definitions to make GDB run on a Sequent Symmetry under dynix 3.0, + with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* We must fetch all the regs before storing, since we store all at once. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +#ifdef _SEQUENT_ +#define CHILD_WAIT +extern int child_wait PARAMS ((int, struct target_waitstatus *)); +#endif + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#ifdef _SEQUENT_ +#include <sys/param.h> +#include <sys/user.h> +#include <sys/mc_vmparam.h> +/* VA_UAREA is defined in <sys/mc_vmparam.h>, and is dependant upon + sizeof(struct user) */ +#define KERNEL_U_ADDR (VA_UAREA) /* ptx */ +#else +#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG)) /* dynix */ +#endif diff --git a/gdb/config/i386/ptx.mh b/gdb/config/i386/ptx.mh new file mode 100644 index 0000000..e623538 --- /dev/null +++ b/gdb/config/i386/ptx.mh @@ -0,0 +1,7 @@ +# Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387 + +XM_FILE= xm-ptx.h +XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o core-aout.o +XM_CLIBS= -lPW -lseq + +NAT_FILE= nm-symmetry.h diff --git a/gdb/config/i386/ptx.mt b/gdb/config/i386/ptx.mt new file mode 100644 index 0000000..757df33 --- /dev/null +++ b/gdb/config/i386/ptx.mt @@ -0,0 +1,3 @@ +# Target: Sequent Symmetry running ptx 2.0, with Weitek 1167 or i387. +TDEPFILES= symm-tdep.o i387-tdep.o i386-tdep.o +TM_FILE= tm-ptx.h diff --git a/gdb/config/i386/ptx4.mh b/gdb/config/i386/ptx4.mh new file mode 100644 index 0000000..7b9d11b --- /dev/null +++ b/gdb/config/i386/ptx4.mh @@ -0,0 +1,7 @@ +# Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387 + +XM_FILE= xm-ptx4.h +XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o core-aout.o solib.o core-regset.o +XM_CLIBS= -lseq + +NAT_FILE= nm-ptx4.h diff --git a/gdb/config/i386/ptx4.mt b/gdb/config/i386/ptx4.mt new file mode 100644 index 0000000..f347809 --- /dev/null +++ b/gdb/config/i386/ptx4.mt @@ -0,0 +1,3 @@ +# Target: Sequent Symmetry running ptx 4.0, with Weitek 1167 or i387. +TDEPFILES= symm-tdep.o i387-tdep.o i386-tdep.o +TM_FILE= tm-ptx4.h diff --git a/gdb/config/i386/sun386.mh b/gdb/config/i386/sun386.mh new file mode 100644 index 0000000..d249661 --- /dev/null +++ b/gdb/config/i386/sun386.mh @@ -0,0 +1,5 @@ +# Host: Sun 386i +XDEPFILES= +XM_FILE= xm-sun386.h +NAT_FILE= nm-sun386.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o sun386-nat.o diff --git a/gdb/config/i386/sun386.mt b/gdb/config/i386/sun386.mt new file mode 100644 index 0000000..665ca64 --- /dev/null +++ b/gdb/config/i386/sun386.mt @@ -0,0 +1,3 @@ +# Target: Sun 386i target configuration file. +TDEPFILES= i386-tdep.o solib.o +TM_FILE= tm-sun386.h diff --git a/gdb/config/i386/symmetry.mh b/gdb/config/i386/symmetry.mh new file mode 100644 index 0000000..69c05bc --- /dev/null +++ b/gdb/config/i386/symmetry.mh @@ -0,0 +1,5 @@ +# Host: Sequent Symmetry running Dynix 3.0, with Weitek 1167 or i387. +XDEPFILES= +XM_FILE= xm-symmetry.h +NAT_FILE= nm-symmetry.h +NATDEPFILES= inftarg.o fork-child.o corelow.o core-aout.o symm-nat.o diff --git a/gdb/config/i386/symmetry.mt b/gdb/config/i386/symmetry.mt new file mode 100644 index 0000000..a3dba70 --- /dev/null +++ b/gdb/config/i386/symmetry.mt @@ -0,0 +1,3 @@ +# Target: Sequent Symmetry running Dynix 3.0, with Weitek 1167 or i387. +TDEPFILES= i386-tdep.o symm-tdep.o i387-tdep.o +TM_FILE= tm-symmetry.h diff --git a/gdb/config/i386/tm-cygwin.h b/gdb/config/i386/tm-cygwin.h new file mode 100644 index 0000000..b1ad894 --- /dev/null +++ b/gdb/config/i386/tm-cygwin.h @@ -0,0 +1,127 @@ +/* Macro definitions for i386 running under the win32 API Unix. + Copyright 1995, 1996 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + + +#include "i386/tm-i386v.h" + +#undef MAX_REGISTER_RAW_SIZE +#undef MAX_REGISTER_VIRTUAL_SIZE +#undef NUM_REGS +#undef REGISTER_BYTE +#undef REGISTER_BYTES +#undef REGISTER_CONVERTIBLE +#undef REGISTER_CONVERT_TO_RAW +#undef REGISTER_CONVERT_TO_VIRTUAL +#undef REGISTER_NAMES +#undef REGISTER_RAW_SIZE +#undef REGISTER_VIRTUAL_SIZE +#undef REGISTER_VIRTUAL_TYPE + +/* Number of machine registers */ + +#define NUM_REGS 24 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +/* the order of the first 8 registers must match the compiler's + * numbering scheme (which is the same as the 386 scheme) + * also, this table must match regmap in i386-pinsn.c. + */ + +#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \ + "esp", "ebp", "esi", "edi", \ + "eip", "ps", "cs", "ss", \ + "ds", "es", "fs", "gs", \ + "st", "st(1)","st(2)","st(3)",\ + "st(4)","st(5)","st(6)","st(7)",} + +#define FP0_REGNUM 16 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#define REGISTER_BYTES (16 * 4 + 8 * 10) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) (((N) < 16) ? (N) * 4 : (((N) - 16) * 10) + (16 * 4)) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) (((N) < 16) ? 4 : 10) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((N) < 16) ? 4 : 10) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 10 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 10 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#define REGISTER_CONVERTIBLE(N) \ + ((N < FP0_REGNUM) ? 0 : 1) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ +extern void +i387_to_double PARAMS ((char *, char *)); + + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + i387_to_double ((FROM), (char *)&val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} + +extern void +double_to_i387 PARAMS ((char *, char *)); + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + double_to_i387((char *)&val, (TO)); \ +} + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N < FP0_REGNUM) ? builtin_type_int : \ + builtin_type_double) + +#define NAMES_HAVE_UNDERSCORE + +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) skip_trampoline_code (pc, name) +#define SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc, 0) +extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR pc, char *name)); + +extern char *cygwin_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) cygwin_pid_to_str (PID) diff --git a/gdb/config/i386/tm-fbsd.h b/gdb/config/i386/tm-fbsd.h new file mode 100644 index 0000000..9933e10 --- /dev/null +++ b/gdb/config/i386/tm-fbsd.h @@ -0,0 +1,32 @@ +/* Target macro definitions for i386 running FreeBSD + Copyright (C) 1997 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include "i386/tm-i386bsd.h" + + +#undef NUM_REGS +#define NUM_REGS 14 + + +#undef IN_SOLIB_CALL_TRAMPOLINE +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) STREQ (name, "_DYNAMIC") + + +extern i386_float_info (); +#define FLOAT_INFO i386_float_info () diff --git a/gdb/config/i386/tm-i386.h b/gdb/config/i386/tm-i386.h new file mode 100644 index 0000000..e2039e5 --- /dev/null +++ b/gdb/config/i386/tm-i386.h @@ -0,0 +1,307 @@ +/* Macro definitions for GDB on an Intel i[345]86. + Copyright (C) 1995, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef TM_I386_H +#define TM_I386_H 1 + +#ifdef __STDC__ /* Forward decl's for prototypes */ +struct frame_info; +struct frame_saved_regs; +struct type; +#endif + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* Used for example in valprint.c:print_floating() to enable checking + for NaN's */ + +#define IEEE_FLOAT + +/* Number of traps that happen between exec'ing the shell to run an + inferior, and when we finally get to the inferior code. This is 2 + on most implementations. */ + +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions to reach some + "real" code. */ + +#define SKIP_PROLOGUE(frompc) {(frompc) = i386_skip_prologue((frompc));} + +extern int i386_skip_prologue PARAMS ((int)); + +/* Immediately after a function call, return the saved pc. Can't always go + through the frames for this because on some machines the new frame is not + set up until the new function executes some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) (read_memory_integer (read_register (SP_REGNUM), 4)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0xcc} + +/* Amount PC must be decremented by after a breakpoint. This is often the + number of bytes in BREAKPOINT but not always. */ + +#define DECR_PC_AFTER_BREAK 1 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_FREGS 0 /*8*/ /* Number of FP regs */ +#define NUM_REGS (16 + NUM_FREGS) /* Basic i*86 regs + FP regs */ + +/* Initializer for an array of names of registers. There should be at least + NUM_REGS strings in this initializer. Any excess ones are simply ignored. + The order of the first 8 registers must match the compiler's numbering + scheme (which is the same as the 386 scheme) and also regmap in the various + *-nat.c files. */ + +#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \ + "esp", "ebp", "esi", "edi", \ + "eip", "eflags", "cs", "ss", \ + "ds", "es", "fs", "gs", \ + "st0", "st1", "st2", "st3", \ + "st4", "st5", "st6", "st7", \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define FP_REGNUM 5 /* (ebp) Contains address of executing stack frame */ +#define SP_REGNUM 4 /* (usp) Contains address of top of stack */ +#define PC_REGNUM 8 /* (eip) Contains program counter */ +#define PS_REGNUM 9 /* (ps) Contains processor status */ + +#define FP0_REGNUM 16 /* (st0) 387 register */ +#define FPC_REGNUM 25 /* 80387 control register */ + +/* Total amount of space needed to store our copies of the machine's register + state, the array `registers'. */ + +#define REGISTER_BYTES ((NUM_REGS - NUM_FREGS)*4 + NUM_FREGS*10) + +/* Index within `registers' of the first byte of the space for register N. */ + +#define REGISTER_BYTE(N) \ + (((N) < FP0_REGNUM) ? ((N) * 4) : ((((N) - FP0_REGNUM) * 10) + 64)) + +/* Number of bytes of storage in the actual machine representation for + register N. All registers are 4 bytes, except 387 st(0) - st(7), + which are 80 bits each. */ + +#define REGISTER_RAW_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 10) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 10 + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 8) + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type of data in + register N. Perhaps si and di should go here, but potentially they + could be used for things other than address. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM) \ + ? lookup_pointer_type (builtin_type_void) \ + : (((N) < FP0_REGNUM) \ + ? builtin_type_int \ + : builtin_type_double)) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { char buf[REGISTER_SIZE]; \ + (SP) -= sizeof (ADDR); \ + store_address (buf, sizeof (ADDR), ADDR); \ + write_memory ((SP), buf, sizeof (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + i386_extract_return_value ((TYPE),(REGBUF),(VALBUF)) + +extern void i386_extract_return_value PARAMS ((struct type *, char [], char *)); + +/* Write into appropriate registers a function return value of type TYPE, given + in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + write_register_bytes (REGISTER_BYTE (FP0_REGNUM), (VALBUF), \ + TYPE_LENGTH (TYPE)); \ + else \ + write_register_bytes (0, (VALBUF), TYPE_LENGTH (TYPE)); \ + } + +/* Extract from an array REGBUF containing the (raw) register state the address + in which a function should return its structure value, as a CORE_ADDR (or an + expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* The following redefines make backtracing through sigtramp work. + They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp + from the sigcontext structure which is pushed by the kernel on the + user stack, along with a pointer to it. */ + +/* FRAME_CHAIN takes a frame's nominal address and produces the frame's + chain-pointer. + In the case of the i386, the frame's nominal address + is the address of a 4-byte word containing the calling frame's address. */ + +#define FRAME_CHAIN(thisframe) \ + ((thisframe)->signal_handler_caller \ + ? (thisframe)->frame \ + : (!inside_entry_file ((thisframe)->pc) \ + ? read_memory_integer ((thisframe)->frame, 4) \ + : 0)) + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + do { \ + if ((FI)->signal_handler_caller) \ + (FRAMELESS) = 0; \ + else \ + (FRAMELESS) = frameless_look_for_prologue(FI); \ + } while (0) + +/* Saved Pc. Get it from sigcontext if within sigtramp. */ + +#define FRAME_SAVED_PC(FRAME) \ + (((FRAME)->signal_handler_caller \ + ? sigtramp_saved_pc (FRAME) \ + : read_memory_integer ((FRAME)->frame + 4, 4)) \ + ) + +extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *)); + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. Can return -1, meaning no way + to tell, which is typical now that the C compiler delays popping them. */ + +#define FRAME_NUM_ARGS(numargs, fi) (numargs) = i386_frame_num_args(fi) + +extern int i386_frame_num_args PARAMS ((struct frame_info *)); + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); } + +extern void i386_frame_find_saved_regs PARAMS ((struct frame_info *, + struct frame_saved_regs *)); + + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); } + +extern void i386_push_dummy_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME { i386_pop_frame (); } + +extern void i386_pop_frame PARAMS ((void)); + + +/* this is + * call 11223344 (32 bit relative) + * int3 + */ + +#define CALL_DUMMY { 0x223344e8, 0xcc11 } + +#define CALL_DUMMY_LENGTH 8 + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +#define CALL_DUMMY_BREAKPOINT_OFFSET 5 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + int from, to, delta, loc; \ + loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \ + from = loc + 5; \ + to = (int)(fun); \ + delta = to - from; \ + *((char *)(dummyname) + 1) = (delta & 0xff); \ + *((char *)(dummyname) + 2) = ((delta >> 8) & 0xff); \ + *((char *)(dummyname) + 3) = ((delta >> 16) & 0xff); \ + *((char *)(dummyname) + 4) = ((delta >> 24) & 0xff); \ +} + +extern void print_387_control_word PARAMS ((unsigned int)); +extern void print_387_status_word PARAMS ((unsigned int)); + +/* Offset from SP to first arg on stack at first instruction of a function */ + +#define SP_ARG0 (1 * 4) + +#endif /* ifndef TM_I386_H */ diff --git a/gdb/config/i386/tm-i386aix.h b/gdb/config/i386/tm-i386aix.h new file mode 100644 index 0000000..b0121fa --- /dev/null +++ b/gdb/config/i386/tm-i386aix.h @@ -0,0 +1,67 @@ +/* Macro defintions for IBM AIX PS/2 (i386). + Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Changes for IBM AIX PS/2 by Minh Tran-Le (tranle@intellicorp.com). */ + +#ifndef TM_I386AIX_H +#define TM_I386AIX_H 1 + +#include "i386/tm-i386.h" +#include <sys/reg.h> + +#ifndef I386 +# define I386 1 +#endif +#ifndef I386_AIX_TARGET +# define I386_AIX_TARGET 1 +#endif + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#undef REGISTER_CONVERTIBLE +#define REGISTER_CONVERTIBLE(N) \ + ((N < FP0_REGNUM) ? 0 : 1) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#undef REGISTER_CONVERT_TO_VIRTUAL +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + i387_to_double ((FROM), (char *)&val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} +extern void +i387_to_double PARAMS ((char *, char *)); + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#undef REGISTER_CONVERT_TO_RAW +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + double_to_i387((char *)&val, (TO)); \ +} +extern void +double_to_i387 PARAMS ((char *, char *)); + +#endif /* TM_I386AIX_H */ diff --git a/gdb/config/i386/tm-i386bsd.h b/gdb/config/i386/tm-i386bsd.h new file mode 100644 index 0000000..8b8c3a9 --- /dev/null +++ b/gdb/config/i386/tm-i386bsd.h @@ -0,0 +1,43 @@ +/* Macro definitions for i386 running under BSD Unix. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386BSD_H +#define TM_I386BSD_H 1 + +#include "i386/tm-i386.h" + +/* 386BSD cannot handle the segment registers. */ +/* BSDI can't handle them either. */ + +#undef NUM_REGS +#define NUM_REGS 10 + +/* On 386 bsd, sigtramp is above the user stack and immediately below + the user area. Using constants here allows for cross debugging. + These are tested for BSDI but should work on 386BSD. */ + +#define SIGTRAMP_START(pc) 0xfdbfdfc0 +#define SIGTRAMP_END(pc) 0xfdbfe000 + +/* Saved Pc. Get it from sigcontext if within sigtramp. */ + +/* Offset to saved PC in sigcontext, from <sys/signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 20 + +#endif /* ifndef TM_I386BSD_H */ diff --git a/gdb/config/i386/tm-i386gnu.h b/gdb/config/i386/tm-i386gnu.h new file mode 100644 index 0000000..a6e3c08 --- /dev/null +++ b/gdb/config/i386/tm-i386gnu.h @@ -0,0 +1,48 @@ +/* Macro definitions for i386, GNU Hurd + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include common definitions for gnu systems */ +#include "nm-gnu.h" + +/* Thread flavors used in re-setting the T bit. + * @@ this is also bad for cross debugging. + */ +#define THREAD_STATE_FLAVOR i386_THREAD_STATE +#define THREAD_STATE_SIZE i386_THREAD_STATE_COUNT +#define THREAD_STATE_SET_TRACED(state) \ + ((struct i386_thread_state *)state)->efl |= 0x100 +#define THREAD_STATE_CLEAR_TRACED(state) \ + ((((struct i386_thread_state *)state)->efl &= ~0x100), 1) + +/* we can do it */ +#define ATTACH_DETACH 1 + +/* Sigh. There should be a file for i386 but no sysv stuff in it */ +#include "i386/tm-i386v.h" + +/* I want to test this float info code. See comment in tm-i386v.h */ +#undef FLOAT_INFO +#define FLOAT_INFO { i386_mach3_float_info (); } + +/* Address of end of stack space. + * for MACH, see <machine/vmparam.h> + * @@@ I don't know what is in the 5 ints... + */ +#undef STACK_END_ADDR +#define STACK_END_ADDR (0xc0000000-sizeof(int [5])) diff --git a/gdb/config/i386/tm-i386lynx.h b/gdb/config/i386/tm-i386lynx.h new file mode 100644 index 0000000..9e732b3 --- /dev/null +++ b/gdb/config/i386/tm-i386lynx.h @@ -0,0 +1,33 @@ +/* Macro definitions for Intel 386 running under LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386LYNX_H +#define TM_I386LYNX_H + +#include "tm-lynx.h" + +/* Most definitions from sysv could be used. */ +#include "i386/tm-i386.h" + +#undef SAVED_PC_AFTER_CALL + +#define SAVED_PC_AFTER_CALL i386lynx_saved_pc_after_call +CORE_ADDR i386lynx_saved_pc_after_call (); + +#endif /* TM_I386LYNX_H */ diff --git a/gdb/config/i386/tm-i386m3.h b/gdb/config/i386/tm-i386m3.h new file mode 100644 index 0000000..2f97505 --- /dev/null +++ b/gdb/config/i386/tm-i386m3.h @@ -0,0 +1,60 @@ +/* Macro definitions for i386, Mach 3.0 + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include common definitions for Mach3 systems */ +#include "nm-m3.h" + +/* Define offsets to access CPROC stack when it does not have + * a kernel thread. + */ +#define MACHINE_CPROC_SP_OFFSET 20 +#define MACHINE_CPROC_PC_OFFSET 16 +#define MACHINE_CPROC_FP_OFFSET 12 + +/* Thread flavors used in re-setting the T bit. + * @@ this is also bad for cross debugging. + */ +#define TRACE_FLAVOR i386_THREAD_STATE +#define TRACE_FLAVOR_SIZE i386_THREAD_STATE_COUNT +#define TRACE_SET(x,state) \ + ((struct i386_thread_state *)state)->efl |= 0x100 +#define TRACE_CLEAR(x,state) \ + ((((struct i386_thread_state *)state)->efl &= ~0x100), 1) + +/* we can do it */ +#define ATTACH_DETACH 1 + +/* Define this if the C compiler puts an underscore at the front + of external names before giving them to the linker. */ + +#define NAMES_HAVE_UNDERSCORE + +/* Sigh. There should be a file for i386 but no sysv stuff in it */ +#include "i386/tm-i386.h" + +/* I want to test this float info code. See comment in tm-i386v.h */ +#undef FLOAT_INFO +#define FLOAT_INFO { i386_mach3_float_info (); } + +/* Address of end of stack space. + * for MACH, see <machine/vmparam.h> + * @@@ I don't know what is in the 5 ints... + */ +#undef STACK_END_ADDR +#define STACK_END_ADDR (0xc0000000-sizeof(int [5])) diff --git a/gdb/config/i386/tm-i386mk.h b/gdb/config/i386/tm-i386mk.h new file mode 100644 index 0000000..3625efb --- /dev/null +++ b/gdb/config/i386/tm-i386mk.h @@ -0,0 +1,25 @@ +/* Macro definitions for i386, Mach 3.0, OSF 1/MK + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Until OSF switches to a newer Mach kernel that has + * a different get_emul_vector() interface. + */ +#define MK67 1 + +#include "i386/tm-i386m3.h" diff --git a/gdb/config/i386/tm-i386nw.h b/gdb/config/i386/tm-i386nw.h new file mode 100644 index 0000000..e5cdade --- /dev/null +++ b/gdb/config/i386/tm-i386nw.h @@ -0,0 +1,49 @@ +/* Macro definitions for i386 running NetWare. + Copyright 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386NW_H +#define TM_I386NW_H 1 + +#include "i386/tm-i386.h" + +/* Stop backtracing when we wander into main. */ + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + + +/* Offsets (in target ints) into jmp_buf. Not defined in any system header + file, so we have to step through setjmp/longjmp with a debugger and figure + them out. */ + +#define JB_ELEMENT_SIZE 4 /* jmp_buf[] is array of ints */ + +#define JB_PC 6 /* Setjmp()'s return PC saved here */ + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +#endif /* ifndef TM_I386NW_H */ + diff --git a/gdb/config/i386/tm-i386os9k.h b/gdb/config/i386/tm-i386os9k.h new file mode 100644 index 0000000..2b48641 --- /dev/null +++ b/gdb/config/i386/tm-i386os9k.h @@ -0,0 +1,63 @@ +/* Macro definitions for i386 running under BSD Unix. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386OS9K_H +#define TM_I386OS9K_H 1 + +#include "i386/tm-i386.h" + +/* Number of machine registers */ + +#undef NUM_REGS +#define NUM_REGS (16) /* Basic i*86 regs */ + +/* Initializer for an array of names of registers. There should be at least + NUM_REGS strings in this initializer. Any excess ones are simply ignored. + The order of the first 8 registers must match the compiler's numbering + scheme (which is the same as the 386 scheme) and also regmap in the various + *-nat.c files. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \ + "esp", "ebp", "esi", "edi", \ + "eip", "eflags", "cs", "ss", \ + "ds", "es", "fs", "gs", \ + } + +#define DATABASE_REG 3 /* ebx */ + +/* Amount PC must be decremented by after a breakpoint. This is often the + number of bytes in BREAKPOINT but not always (such as now). */ + +#undef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 0 + +/* On 386 bsd, sigtramp is above the user stack and immediately below + the user area. Using constants here allows for cross debugging. + These are tested for BSDI but should work on 386BSD. */ +#define SIGTRAMP_START(pc) 0xfdbfdfc0 +#define SIGTRAMP_END(pc) 0xfdbfe000 + +/* Saved Pc. Get it from sigcontext if within sigtramp. */ + +/* Offset to saved PC in sigcontext, from <sys/signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 20 + +#define BELIEVE_PCC_PROMOTION 1 + +#endif /* #ifndef TM_I386OS9K_H */ diff --git a/gdb/config/i386/tm-i386sco5.h b/gdb/config/i386/tm-i386sco5.h new file mode 100644 index 0000000..ffac5b3 --- /dev/null +++ b/gdb/config/i386/tm-i386sco5.h @@ -0,0 +1,62 @@ +/* Macro definitions for GDB on an Intel i386 running SCO Open Server 5. + Copyright (C) 1998 Free Software Foundation, Inc. + Written by J. Kean Johnston (jkj@sco.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386SCO5_H +#define TM_I386SCO5_H 1 + +/* Pick up most of what we need from the generic i386 target include file. */ + +#include "i386/tm-i386.h" + +/* Pick up more stuff from the generic SYSV and SVR4 host include files. */ +#include "i386/tm-i386v.h" +#include "tm-sysv4.h" + +#define KERNEL_U_SIZE kernel_u_size() + +/* + * SCO is unlike other SVR3 targets in that it has SVR4 style shared + * libs, with a slight twist. We expect 3 traps (2 for the exec and + * one for the dynamic loader). After the third trap we insert the + * SOLIB breakpoints, then wait for the 4th trap. + */ +#undef START_INFERIOR_TRAPS_EXPECTED +#define START_INFERIOR_TRAPS_EXPECTED 3 + +/* We can also do hardware watchpoints */ +#define TARGET_HAS_HARDWARE_WATCHPOINTS +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) 1 + +/* After a watchpoint trap, the PC points to the instruction which + caused the trap. But we can continue over it without disabling the + trap. */ +#define HAVE_CONTINUABLE_WATCHPOINT +#define HAVE_STEPPABLE_WATCHPOINT + +#define STOPPED_BY_WATCHPOINT(W) \ + i386_stopped_by_watchpoint (inferior_pid) + +#define target_insert_watchpoint(addr, len, type) \ + i386_insert_watchpoint (inferior_pid, addr, len, type) + +#define target_remove_watchpoint(addr, len, type) \ + i386_remove_watchpoint (inferior_pid, addr, len) + +#endif /* ifndef TM_I386SCO5_H */ diff --git a/gdb/config/i386/tm-i386sol2.h b/gdb/config/i386/tm-i386sol2.h new file mode 100644 index 0000000..dbd6317 --- /dev/null +++ b/gdb/config/i386/tm-i386sol2.h @@ -0,0 +1,64 @@ +/* Macro definitions for GDB on an Intel i386 running Solaris 2. + Copyright (C) 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386SOL2_H +#define TM_I386SOL2_H 1 + +#include "i386/tm-i386v4.h" + +/* Signal handler frames under Solaris 2 are recognized by a return address + of 0xFFFFFFFF, the third parameter on the signal handler stack is + a pointer to an ucontext. */ +#undef sigtramp_saved_pc +#undef I386V4_SIGTRAMP_SAVED_PC +#define SIGCONTEXT_PC_OFFSET (36 + 14 * 4) +#undef IN_SIGTRAMP +#define IN_SIGTRAMP(pc, name) (pc == 0xFFFFFFFF) + +/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols, + and for SunPRO 3.0, N_FUN symbols too. */ +#define SOFUN_ADDRESS_MAYBE_MISSING + +extern char *sunpro_static_transform_name PARAMS ((char *)); +#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x) +#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '.') + +#define FAULTED_USE_SIGINFO + +/* Macros to extract process id and thread id from a composite pid/tid */ +#define PIDGET(pid) ((pid) & 0xffff) +#define TIDGET(pid) (((pid) >> 16) & 0xffff) + +/* Macro to extract carry from given regset. */ +#define PS_FLAG_CARRY 0x1 /* Carry bit in PS */ +#define PROCFS_GET_CARRY(regset) ((regset)[EFL] & PS_FLAG_CARRY) + +#ifdef HAVE_THREAD_DB_LIB + +extern char *solaris_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) solaris_pid_to_str (PID) + +#else + +extern char *procfs_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) procfs_pid_to_str (PID) + +#endif + +#endif /* ifndef TM_I386SOL2_H */ diff --git a/gdb/config/i386/tm-i386v.h b/gdb/config/i386/tm-i386v.h new file mode 100644 index 0000000..bb31cb0 --- /dev/null +++ b/gdb/config/i386/tm-i386v.h @@ -0,0 +1,163 @@ +/* Macro definitions for i386, Unix System V. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386V_H +#define TM_I386V_H 1 + +/* First pick up the generic *86 target file. */ + +#include "i386/tm-i386.h" + +/* Number of traps that happen between exec'ing the shell to run an + inferior, and when we finally get to the inferior code. This is + 2 on most implementations. Override here to 4. */ + +#undef START_INFERIOR_TRAPS_EXPECTED +#define START_INFERIOR_TRAPS_EXPECTED 4 + +/* Number of machine registers */ + +#undef NUM_REGS +#define NUM_REGS 16 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +/* the order of the first 8 registers must match the compiler's + * numbering scheme (which is the same as the 386 scheme) + * also, this table must match regmap in i386-pinsn.c. + */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \ + "esp", "ebp", "esi", "edi", \ + "eip", "ps", "cs", "ss", \ + "ds", "es", "fs", "gs", \ + } + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#undef REGISTER_BYTES +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) (4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#undef REGISTER_VIRTUAL_SIZE +#define REGISTER_VIRTUAL_SIZE(N) (4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#undef MAX_REGISTER_RAW_SIZE +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#undef MAX_REGISTER_VIRTUAL_SIZE +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ +/* Perhaps si and di should go here, but potentially they could be + used for things other than address. */ + +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ? \ + lookup_pointer_type (builtin_type_void) : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#undef STORE_STRUCT_RETURN +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { char buf[REGISTER_SIZE]; \ + (SP) -= sizeof (ADDR); \ + store_address (buf, sizeof (ADDR), ADDR); \ + write_memory ((SP), buf, sizeof (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy ((VALBUF), (REGBUF), TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#undef STORE_RETURN_VALUE +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +#undef FRAME_CHAIN +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#undef FRAMELESS_FUNCTION_INVOCATION +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#undef FRAME_SAVED_PC +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#undef FRAME_NUM_ARGS +#define FRAME_NUM_ARGS(numargs, fi) (numargs) = -1 + +#ifdef __STDC__ /* Forward decl's for prototypes */ +struct frame_info; +struct frame_saved_regs; +#endif + +extern int +i386_frame_num_args PARAMS ((struct frame_info *)); + +#endif /* ifndef TM_I386V_H */ diff --git a/gdb/config/i386/tm-i386v4.h b/gdb/config/i386/tm-i386v4.h new file mode 100644 index 0000000..eafff01 --- /dev/null +++ b/gdb/config/i386/tm-i386v4.h @@ -0,0 +1,78 @@ +/* Macro definitions for GDB on an Intel i386 running SVR4. + Copyright (C) 1991, 1994 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386V4_H +#define TM_I386V4_H 1 + +/* Pick up most of what we need from the generic i386 target include file. */ + +#include "i386/tm-i386.h" + +/* Pick up more stuff from the generic SVR4 host include file. */ + +#include "tm-sysv4.h" + +/* Use the alternate method of determining valid frame chains. */ + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +/* Offsets (in target ints) into jmp_buf. Not defined in any system header + file, so we have to step through setjmp/longjmp with a debugger and figure + them out. Note that <setjmp> defines _JBLEN as 10, which is the default + if no specific machine is selected, even though we only use 6 slots. */ + +#define JB_ELEMENT_SIZE sizeof(int) /* jmp_buf[_JBLEN] is array of ints */ + +#define JB_EBX 0 +#define JB_ESI 1 +#define JB_EDI 2 +#define JB_EBP 3 +#define JB_ESP 4 +#define JB_EDX 5 + +#define JB_PC JB_EDX /* Setjmp()'s return PC saved in EDX */ + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +/* The following redefines make backtracing through sigtramp work. + They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp + from the ucontext structure which is pushed by the kernel on the + user stack. Unfortunately there are three variants of sigtramp handlers. */ + +#define I386V4_SIGTRAMP_SAVED_PC +#define IN_SIGTRAMP(pc, name) ((name) \ + && (STREQ ("_sigreturn", name) \ + || STREQ ("_sigacthandler", name) \ + || STREQ ("sigvechandler", name))) + +/* Saved Pc. Get it from ucontext if within sigtramp. */ + +#define sigtramp_saved_pc i386v4_sigtramp_saved_pc +extern CORE_ADDR i386v4_sigtramp_saved_pc PARAMS ((struct frame_info *)); + +#endif /* ifndef TM_I386V4_H */ diff --git a/gdb/config/i386/tm-i386v42mp.h b/gdb/config/i386/tm-i386v42mp.h new file mode 100644 index 0000000..81df85b --- /dev/null +++ b/gdb/config/i386/tm-i386v42mp.h @@ -0,0 +1,44 @@ +/* Macro definitions for GDB on an Intel i386 running SVR4.2MP + Copyright (C) 1991, 1994 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_I386V42MP_H +#define TM_I386V42MP_H 1 + +/* pick up more generic x86 sysv4 stuff */ + +#include "i386/tm-i386v4.h" + +/* procfs on this architecture has multiple fds (ctl, as, map, status) + including a control fd */ + +#ifndef HAVE_MULTIPLE_PROC_FDS +#define HAVE_MULTIPLE_PROC_FDS +#endif + +/* procfs on this architecture communicates with read/write instead + of ioctl */ + +#define PROCFS_USE_READ_WRITE + +/* define to select for other sysv4.2mp weirdness */ + +#define UNIXWARE + +#endif /* ifndef TM_I386V42MP_H */ diff --git a/gdb/config/i386/tm-linux.h b/gdb/config/i386/tm-linux.h new file mode 100644 index 0000000..417d151 --- /dev/null +++ b/gdb/config/i386/tm-linux.h @@ -0,0 +1,38 @@ +/* Definitions to target GDB to GNU/Linux on 386. + Copyright 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_LINUX_H +#define TM_LINUX_H + +/* FIXME: If nothing else gets added to this file, it could be removed + and configure could just use tm-i386.h instead. -fnf */ + +#include "i386/tm-i386.h" + +/* Offset to saved PC in sigcontext, from <linux/signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 38 + +/* We need this file for the SOLIB_TRAMPOLINE stuff. */ + +#include "tm-sysv4.h" + +/* The following works around a problem with /usr/include/sys/procfs.h */ +#define sys_quotactl 1 + +#endif /* #ifndef TM_LINUX_H */ diff --git a/gdb/config/i386/tm-nbsd.h b/gdb/config/i386/tm-nbsd.h new file mode 100644 index 0000000..cf5159f --- /dev/null +++ b/gdb/config/i386/tm-nbsd.h @@ -0,0 +1,42 @@ +/* Macro definitions for i386 running under NetBSD. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_NBSD_H +#define TM_NBSD_H + +#include "i386/tm-i386bsd.h" +#include "tm-nbsd.h" + +#undef NUM_REGS +#define NUM_REGS 16 + +#define JB_ELEMENT_SIZE sizeof(int) /* jmp_buf[_JBLEN] is array of ints */ +#define JB_PC 0 /* Setjmp()'s return PC saved here */ + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +#endif /* TM_NBSD_H */ diff --git a/gdb/config/i386/tm-ptx.h b/gdb/config/i386/tm-ptx.h new file mode 100644 index 0000000..c9f67d7 --- /dev/null +++ b/gdb/config/i386/tm-ptx.h @@ -0,0 +1,232 @@ +/* Target machine definitions for GDB on a Sequent Symmetry under ptx + with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + Symmetry version by Jay Vosburgh (fubar@sequent.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PTX_H +#define TM_PTX_H 1 + +/* I don't know if this will work for cross-debugging, even if you do get + a copy of the right include file. */ + +#include <sys/reg.h> + +#ifdef SEQUENT_PTX4 +#include "i386/tm-i386v4.h" +#else /* !SEQUENT_PTX4 */ +#include "i386/tm-i386v.h" +#endif + +/* Number of traps that happen between exec'ing the shell to run an + inferior, and when we finally get to the inferior code. This is 2 + on most implementations. Here we have to undo what tm-i386v.h gave + us and restore the default. */ + +#undef START_INFERIOR_TRAPS_EXPECTED +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* Amount PC must be decremented by after a breakpoint. This is often the + number of bytes in BREAKPOINT but not always (such as now). */ + +#undef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 0 + +#if 0 + --- this code can't be used unless we know we are running native, + since it uses host specific ptrace calls. +/* code for 80387 fpu. Functions are from i386-dep.c, copied into + * symm-dep.c. + */ +#define FLOAT_INFO { i386_float_info(); } +#endif + +/* Number of machine registers */ + +#undef NUM_REGS +#define NUM_REGS 49 + +/* Initializer for an array of names of registers. There should be at least + NUM_REGS strings in this initializer. Any excess ones are simply ignored. + The order of the first 8 registers must match the compiler's numbering + scheme (which is the same as the 386 scheme) and also regmap in the various + *-nat.c files. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \ + "esp", "ebp", "esi", "edi", \ + "eip", "eflags", "st0", "st1", \ + "st2", "st3", "st4", "st5", \ + "st6", "st7", "fp1", "fp2", \ + "fp3", "fp4", "fp5", "fp6", \ + "fp7", "fp8", "fp9", "fp10", \ + "fp11", "fp12", "fp13", "fp14", \ + "fp15", "fp16", "fp17", "fp18", \ + "fp19", "fp20", "fp21", "fp22", \ + "fp23", "fp24", "fp25", "fp26", \ + "fp27", "fp28", "fp29", "fp30", \ + "fp31" } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define EAX_REGNUM 0 +#define ECX_REGNUM 1 +#define EDX_REGNUM 2 +#define EBX_REGNUM 3 + +#define ESP_REGNUM 4 +#define EBP_REGNUM 5 + +#define ESI_REGNUM 6 +#define EDI_REGNUM 7 + +#define EIP_REGNUM 8 +#define EFLAGS_REGNUM 9 + +#define ST0_REGNUM 10 +#define ST1_REGNUM 11 +#define ST2_REGNUM 12 +#define ST3_REGNUM 13 + +#define ST4_REGNUM 14 +#define ST5_REGNUM 15 +#define ST6_REGNUM 16 +#define ST7_REGNUM 17 + +#define FP1_REGNUM 18 /* first 1167 register */ +/* Get %fp2 - %fp31 by addition, since they are contiguous */ + +#undef SP_REGNUM +#define SP_REGNUM ESP_REGNUM /* Contains address of top of stack */ +#undef FP_REGNUM +#define FP_REGNUM EBP_REGNUM /* Contains address of executing stack frame */ +#undef PC_REGNUM +#define PC_REGNUM EIP_REGNUM /* Contains program counter */ +#undef PS_REGNUM +#define PS_REGNUM EFLAGS_REGNUM /* Contains processor status */ + +/* + * For ptx, this is a little bit bizarre, since the register block + * is below the u area in memory. This means that blockend here ends + * up being negative (for the call from coredep.c) since the value in + * u.u_ar0 will be less than KERNEL_U_ADDR (and coredep.c passes us + * u.u_ar0 - KERNEL_U_ADDR in blockend). Since we also define + * FETCH_INFERIOR_REGISTERS (and supply our own functions for that), + * the core file case will be the only use of this function. + */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ (addr) = ptx_register_u_addr((blockend), (regno)); } + +extern int +ptx_register_u_addr PARAMS ((int, int)); + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. 10 i*86 registers, 8 i387 + registers, and 31 Weitek 1167 registers */ + +#undef REGISTER_BYTES +#define REGISTER_BYTES ((10 * 4) + (8 * 10) + (31 * 4)) + +/* Index within `registers' of the first byte of the space for register N. */ + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ +(((N) < ST0_REGNUM) ? ((N) * 4) : \ + ((N) < FP1_REGNUM) ? (40 + (((N) - ST0_REGNUM) * 10)) : \ + (40 + 80 + (((N) - FP1_REGNUM) * 4))) + +/* Number of bytes of storage in the actual machine representation for + register N. All registers are 4 bytes, except 387 st(0) - st(7), + which are 80 bits each. */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) \ +(((N) < ST0_REGNUM) ? 4 : \ + ((N) < FP1_REGNUM) ? 10 : \ + 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#undef MAX_REGISTER_RAW_SIZE +#define MAX_REGISTER_RAW_SIZE 10 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#undef REGISTER_CONVERTIBLE +#define REGISTER_CONVERTIBLE(N) \ +((N < ST0_REGNUM) ? 0 : \ + (N < FP1_REGNUM) ? 1 : \ + 0) + +/* Convert data from raw format for register REGNUM + to virtual format for register REGNUM. */ +extern const struct floatformat floatformat_i387_ext; /* from floatformat.h */ + +#undef REGISTER_CONVERT_TO_VIRTUAL +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +((REGNUM < ST0_REGNUM) ? (void)memcpy ((TO), (FROM), 4) : \ + (REGNUM < FP1_REGNUM) ? (void)floatformat_to_double(&floatformat_i387_ext, \ + (FROM),(TO)) : \ + (void)memcpy ((TO), (FROM), 4)) + +/* Convert data from virtual format for register REGNUM + to raw format for register REGNUM. */ + +#undef REGISTER_CONVERT_TO_RAW +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +((REGNUM < ST0_REGNUM) ? (void)memcpy ((TO), (FROM), 4) : \ + (REGNUM < FP1_REGNUM) ? (void)floatformat_from_double(&floatformat_i387_ext, \ + (FROM),(TO)) : \ + (void)memcpy ((TO), (FROM), 4)) + +/* Return the GDB type object for the "standard" data type + of data in register N. */ +/* + * Note: the 1167 registers (the last line, builtin_type_float) are + * generally used in pairs, with each pair being treated as a double. + * It it also possible to use them singly as floats. I'm not sure how + * in gdb to treat the register pair pseudo-doubles. -fubar + */ +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ +((N < ST0_REGNUM) ? builtin_type_int : \ + (N < FP1_REGNUM) ? builtin_type_double : \ + builtin_type_float) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + symmetry_extract_return_value(TYPE, REGBUF, VALBUF) + +/* +#undef FRAME_FIND_SAVED_REGS +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ ptx_frame_find_saved_regs((frame_info), &(frame_saved_regs)); } +*/ + +#endif /* ifndef TM_PTX_H */ diff --git a/gdb/config/i386/tm-ptx4.h b/gdb/config/i386/tm-ptx4.h new file mode 100644 index 0000000..a576acc --- /dev/null +++ b/gdb/config/i386/tm-ptx4.h @@ -0,0 +1,24 @@ +/* Target machine definitions for GDB on a Sequent Symmetry under ptx + with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + Symmetry version by Jay Vosburgh (fubar@sequent.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define SEQUENT_PTX4 + +#include "tm-ptx.h" diff --git a/gdb/config/i386/tm-sun386.h b/gdb/config/i386/tm-sun386.h new file mode 100644 index 0000000..259fd51 --- /dev/null +++ b/gdb/config/i386/tm-sun386.h @@ -0,0 +1,205 @@ +/* Parameters for a Sun 386i target machine, for GDB, the GNU debugger. + Copyright 1986, 1987, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if !defined (TM_SUN386_H) +#define TM_SUN386_H 1 + +#include "i386/tm-i386.h" + +#ifndef sun386 +#define sun386 +#endif +#define GDB_TARGET_IS_SUN386 1 +#define SUNOS4 +#define USE_MACHINE_REG_H + +/* Perhaps some day this will work even without the following #define */ +#define COFF_ENCAPSULATE + +#ifdef COFF_ENCAPSULATE +/* Avoid conflicts between our include files and <sys/exec.h> + (maybe not needed anymore). */ +#define _EXEC_ +#endif + +/* sun386 ptrace seems unable to change the frame pointer */ +#define PTRACE_FP_BUG + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0xfc000000 + +/* Number of machine registers */ + +#undef NUM_REGS +#define NUM_REGS 35 + +/* Initializer for an array of names of registers. There should be NUM_REGS + strings in this initializer. The order of the first 8 registers must match + the compiler's numbering scheme (which is the same as the 386 scheme) also, + this table must match regmap in i386-pinsn.c. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES { "gs", "fs", "es", "ds", \ + "edi", "esi", "ebp", "esp", \ + "ebx", "edx", "ecx", "eax", \ + "retaddr", "trapnum", "errcode", "ip", \ + "cs", "ps", "sp", "ss", \ + "fst0", "fst1", "fst2", "fst3", \ + "fst4", "fst5", "fst6", "fst7", \ + "fctrl", "fstat", "ftag", "fip", \ + "fcs", "fopoff", "fopsel" \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#undef FP_REGNUM +#define FP_REGNUM 6 /* (ebp) Contains address of executing stack frame */ +#undef SP_REGNUM +#define SP_REGNUM 18 /* (usp) Contains address of top of stack */ +#undef PS_REGNUM +#define PS_REGNUM 17 /* (ps) Contains processor status */ +#undef PC_REGNUM +#define PC_REGNUM 15 /* (eip) Contains program counter */ +#undef FP0_REGNUM +#define FP0_REGNUM 20 /* Floating point register 0 */ +#undef FPC_REGNUM +#define FPC_REGNUM 28 /* 80387 control register */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#undef REGISTER_BYTES +#define REGISTER_BYTES (20*4+8*10+7*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ + ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 160 \ + : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 10) + 80 \ + : (N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 10 : 4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#undef REGISTER_VIRTUAL_SIZE +#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 8 : 4) + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#undef REGISTER_CONVERTIBLE +#define REGISTER_CONVERTIBLE(N) (((unsigned)((N) - FP0_REGNUM)) < 8) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#undef REGISTER_CONVERT_TO_VIRTUAL +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + i387_to_double ((FROM), (char *)&val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} +extern void +i387_to_double PARAMS ((char *, char *)); + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#undef REGISTER_CONVERT_TO_RAW +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + double_to_i387((char *)&val, (TO)); \ +} +extern void +double_to_i387 PARAMS ((char *, char *)); + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ + (((unsigned)((N) - FP0_REGNUM)) < 8 ? builtin_type_double : builtin_type_int) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#undef STORE_RETURN_VALUE +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +#undef FRAME_CHAIN +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#undef FRAMELESS_FUNCTION_INVOCATION +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ +{ (FRAMELESS) = frameless_look_for_prologue (FI); } + +#undef FRAME_SAVED_PC +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#undef FIX_CALL_DUMMY +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + *(int *)((char *)(dummyname) + 1) = (int)(fun) - (pc) - 5; \ +} + +#endif /* !defined (TM_SUN386_H) */ + diff --git a/gdb/config/i386/tm-symmetry.h b/gdb/config/i386/tm-symmetry.h new file mode 100644 index 0000000..11931d4 --- /dev/null +++ b/gdb/config/i386/tm-symmetry.h @@ -0,0 +1,321 @@ +/* Target machine definitions for GDB on a Sequent Symmetry under dynix 3.0, + with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994 + Free Software Foundation, Inc. + Symmetry version by Jay Vosburgh (fubar@sequent.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_SYMMETRY_H +#define TM_SYMMETRY_H 1 + +/* I don't know if this will work for cross-debugging, even if you do get + a copy of the right include file. */ +#include <machine/reg.h> + +#include "i386/tm-i386v.h" + +#undef START_INFERIOR_TRAPS_EXPECTED +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* Amount PC must be decremented by after a breakpoint. This is often the + number of bytes in BREAKPOINT but not always (such as now). */ + +#undef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 0 + +#if 0 +/* --- this code can't be used unless we know we are running native, + since it uses host specific ptrace calls. */ +/* code for 80387 fpu. Functions are from i386-dep.c, copied into + * symm-dep.c. + */ +#define FLOAT_INFO { i386_float_info(); } +#endif + +/* Number of machine registers */ + +#undef NUM_REGS +#define NUM_REGS 49 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +/* Initializer for an array of names of registers. There should be at least + NUM_REGS strings in this initializer. Any excess ones are simply ignored. + Symmetry registers are in this weird order to match the register numbers + in the symbol table entries. If you change the order, things will probably + break mysteriously for no apparent reason. Also note that the st(0)... + st(7) 387 registers are represented as st0...st7. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES { "eax", "edx", "ecx", "st0", "st1", \ + "ebx", "esi", "edi", "st2", "st3", \ + "st4", "st5", "st6", "st7", "esp", \ + "ebp", "eip", "eflags","fp1", "fp2", \ + "fp3", "fp4", "fp5", "fp6", "fp7", \ + "fp8", "fp9", "fp10", "fp11", "fp12", \ + "fp13", "fp14", "fp15", "fp16", "fp17", \ + "fp18", "fp19", "fp20", "fp21", "fp22", \ + "fp23", "fp24", "fp25", "fp26", "fp27", \ + "fp28", "fp29", "fp30", "fp31" } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define EAX_REGNUM 0 +#define EDX_REGNUM 1 +#define ECX_REGNUM 2 +#define ST0_REGNUM 3 +#define ST1_REGNUM 4 +#define EBX_REGNUM 5 +#define ESI_REGNUM 6 +#define EDI_REGNUM 7 +#define ST2_REGNUM 8 +#define ST3_REGNUM 9 + +#define ST4_REGNUM 10 +#define ST5_REGNUM 11 +#define ST6_REGNUM 12 +#define ST7_REGNUM 13 + +#define FP1_REGNUM 18 /* first 1167 register */ +/* Get %fp2 - %fp31 by addition, since they are contiguous */ + +#undef SP_REGNUM +#define SP_REGNUM 14 /* (usp) Contains address of top of stack */ +#define ESP_REGNUM 14 +#undef FP_REGNUM +#define FP_REGNUM 15 /* (ebp) Contains address of executing stack frame */ +#define EBP_REGNUM 15 +#undef PC_REGNUM +#define PC_REGNUM 16 /* (eip) Contains program counter */ +#define EIP_REGNUM 16 +#undef PS_REGNUM +#define PS_REGNUM 17 /* (ps) Contains processor status */ +#define EFLAGS_REGNUM 17 + +/* + * Following macro translates i386 opcode register numbers to Symmetry + * register numbers. This is used by i386_frame_find_saved_regs. + * + * %eax %ecx %edx %ebx %esp %ebp %esi %edi + * i386 0 1 2 3 4 5 6 7 + * Symmetry 0 2 1 5 14 15 6 7 + * + */ +#define I386_REGNO_TO_SYMMETRY(n) \ +((n)==0?0 :(n)==1?2 :(n)==2?1 :(n)==3?5 :(n)==4?14 :(n)==5?15 :(n)) + +/* The magic numbers below are offsets into u_ar0 in the user struct. + * They live in <machine/reg.h>. Gdb calls this macro with blockend + * holding u.u_ar0 - KERNEL_U_ADDR. Only the registers listed are + * saved in the u area (along with a few others that aren't useful + * here. See <machine/reg.h>). + */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ struct user foo; /* needed for finding fpu regs */ \ +switch (regno) { \ + case 0: \ + addr = blockend + EAX * sizeof(int); break; \ + case 1: \ + addr = blockend + EDX * sizeof(int); break; \ + case 2: \ + addr = blockend + ECX * sizeof(int); break; \ + case 3: /* st(0) */ \ + addr = ((int)&foo.u_fpusave.fpu_stack[0][0] - (int)&foo); \ + break; \ + case 4: /* st(1) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[1][0] - (int)&foo); \ + break; \ + case 5: \ + addr = blockend + EBX * sizeof(int); break; \ + case 6: \ + addr = blockend + ESI * sizeof(int); break; \ + case 7: \ + addr = blockend + EDI * sizeof(int); break; \ + case 8: /* st(2) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[2][0] - (int)&foo); \ + break; \ + case 9: /* st(3) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[3][0] - (int)&foo); \ + break; \ + case 10: /* st(4) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[4][0] - (int)&foo); \ + break; \ + case 11: /* st(5) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[5][0] - (int)&foo); \ + break; \ + case 12: /* st(6) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[6][0] - (int)&foo); \ + break; \ + case 13: /* st(7) */ \ + addr = ((int) &foo.u_fpusave.fpu_stack[7][0] - (int)&foo); \ + break; \ + case 14: \ + addr = blockend + ESP * sizeof(int); break; \ + case 15: \ + addr = blockend + EBP * sizeof(int); break; \ + case 16: \ + addr = blockend + EIP * sizeof(int); break; \ + case 17: \ + addr = blockend + FLAGS * sizeof(int); break; \ + case 18: /* fp1 */ \ + case 19: /* fp2 */ \ + case 20: /* fp3 */ \ + case 21: /* fp4 */ \ + case 22: /* fp5 */ \ + case 23: /* fp6 */ \ + case 24: /* fp7 */ \ + case 25: /* fp8 */ \ + case 26: /* fp9 */ \ + case 27: /* fp10 */ \ + case 28: /* fp11 */ \ + case 29: /* fp12 */ \ + case 30: /* fp13 */ \ + case 31: /* fp14 */ \ + case 32: /* fp15 */ \ + case 33: /* fp16 */ \ + case 34: /* fp17 */ \ + case 35: /* fp18 */ \ + case 36: /* fp19 */ \ + case 37: /* fp20 */ \ + case 38: /* fp21 */ \ + case 39: /* fp22 */ \ + case 40: /* fp23 */ \ + case 41: /* fp24 */ \ + case 42: /* fp25 */ \ + case 43: /* fp26 */ \ + case 44: /* fp27 */ \ + case 45: /* fp28 */ \ + case 46: /* fp29 */ \ + case 47: /* fp30 */ \ + case 48: /* fp31 */ \ + addr = ((int) &foo.u_fpasave.fpa_regs[(regno)-18] - (int)&foo); \ + } \ +} + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. 10 i*86 registers, 8 i387 + registers, and 31 Weitek 1167 registers */ + +#undef REGISTER_BYTES +#define REGISTER_BYTES ((10 * 4) + (8 * 10) + (31 * 4)) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ +(((N) < 3) ? ((N) * 4) : \ +((N) < 5) ? ((((N) - 2) * 10) + 2) : \ +((N) < 8) ? ((((N) - 5) * 4) + 32) : \ +((N) < 14) ? ((((N) - 8) * 10) + 44) : \ + ((((N) - 14) * 4) + 104)) + +/* Number of bytes of storage in the actual machine representation + * for register N. All registers are 4 bytes, except 387 st(0) - st(7), + * which are 80 bits each. + */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) \ +(((N) < 3) ? 4 : \ +((N) < 5) ? 10 : \ +((N) < 8) ? 4 : \ +((N) < 14) ? 10 : \ + 4) + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#undef REGISTER_CONVERTIBLE +#define REGISTER_CONVERTIBLE(N) \ +(((N) < 3) ? 0 : \ +((N) < 5) ? 1 : \ +((N) < 8) ? 0 : \ +((N) < 14) ? 1 : \ + 0) + +#include "floatformat.h" + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#undef REGISTER_CONVERT_TO_VIRTUAL +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + floatformat_to_double (&floatformat_i387_ext, (FROM), &val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#undef REGISTER_CONVERT_TO_RAW +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + floatformat_from_double (&floatformat_i387_ext, &val, (TO)); \ +} + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ +((N < 3) ? builtin_type_int : \ +(N < 5) ? builtin_type_double : \ +(N < 8) ? builtin_type_int : \ +(N < 14) ? builtin_type_double : \ + builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + Native cc passes the address in eax, gcc (up to version 2.5.8) + passes it on the stack. gcc should be fixed in future versions to + adopt native cc conventions. */ + +#undef STORE_STRUCT_RETURN +#define STORE_STRUCT_RETURN(ADDR, SP) write_register(0, (ADDR)) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + symmetry_extract_return_value(TYPE, REGBUF, VALBUF) + +/* The following redefines make backtracing through sigtramp work. + They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp + from the sigcontext structure which is pushed by the kernel on the + user stack, along with a pointer to it. */ + +#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigcode", name)) + +/* Offset to saved PC in sigcontext, from <signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 16 + +#endif /* ifndef TM_SYMMETRY_H */ + diff --git a/gdb/config/i386/xm-cygwin.h b/gdb/config/i386/xm-cygwin.h new file mode 100644 index 0000000..f0b8227 --- /dev/null +++ b/gdb/config/i386/xm-cygwin.h @@ -0,0 +1,34 @@ +/* Definitions for hosting on WIN32, for GDB. + Copyright 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +#include "fopen-bin.h" + +#define GDBINIT_FILENAME "gdb.ini" + +#define SLASH_P(X) ((X)=='\\' || (X) == '/') +#define ROOTED_P(X) ((SLASH_P((X)[0]))|| ((X)[1] ==':')) +#define SLASH_CHAR '/' +#define SLASH_STRING "/" + +/* Define this if source files use \r\n rather than just \n. */ +#define CRLF_SOURCE_FILES + +#define HAVE_SIGSETMASK 0 diff --git a/gdb/config/i386/xm-go32.h b/gdb/config/i386/xm-go32.h new file mode 100644 index 0000000..0797833 --- /dev/null +++ b/gdb/config/i386/xm-go32.h @@ -0,0 +1,31 @@ +/* Definitions for hosting on GO32, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#include "fopen-bin.h" + +/* Define this lseek(n) != nth byte of file */ +#define LSEEK_NOT_LINEAR + +#define CANT_FORK + +#undef QUIT +#define QUIT { pollquit(); } + +#define GDBINIT_FILENAME "gdb.ini" diff --git a/gdb/config/i386/xm-i386aix.h b/gdb/config/i386/xm-i386aix.h new file mode 100644 index 0000000..652a149 --- /dev/null +++ b/gdb/config/i386/xm-i386aix.h @@ -0,0 +1,33 @@ +/* Macro defintions for AIX PS/2 (i386) + Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Changed for IBM AIX ps/2 by Minh Tran Le (tranle@intellicorp.com) + * Revision: 23-Oct-92 17:42:49 + */ + +#include "i386/xm-i386v.h" + +#undef HAVE_TERMIO +#define HAVE_SGTTY + +#include <limits.h> + +/* Use setpgid instead of setpgrp on AIX */ +#define NEED_POSIX_SETPGID diff --git a/gdb/config/i386/xm-i386bsd.h b/gdb/config/i386/xm-i386bsd.h new file mode 100644 index 0000000..e5c4c89 --- /dev/null +++ b/gdb/config/i386/xm-i386bsd.h @@ -0,0 +1,22 @@ +/* Host-dependent definitions for Intel 386 running BSD Unix, for GDB. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +#include <machine/limits.h> /* for INT_MIN */ diff --git a/gdb/config/i386/xm-i386gnu.h b/gdb/config/i386/xm-i386gnu.h new file mode 100644 index 0000000..60307b2 --- /dev/null +++ b/gdb/config/i386/xm-i386gnu.h @@ -0,0 +1,23 @@ +/* Definitions to make GDB run on the GNU Hurd on an Intel 386 + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* Do implement the attach and detach commands. */ +#define ATTACH_DETACH 1 diff --git a/gdb/config/i386/xm-i386lynx.h b/gdb/config/i386/xm-i386lynx.h new file mode 100644 index 0000000..6078cb6 --- /dev/null +++ b/gdb/config/i386/xm-i386lynx.h @@ -0,0 +1,24 @@ +/* Host-dependent definitions for Intel 386 running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* Get generic LynxOS host definitions. */ + +#include "xm-lynx.h" diff --git a/gdb/config/i386/xm-i386m3.h b/gdb/config/i386/xm-i386m3.h new file mode 100644 index 0000000..b667409 --- /dev/null +++ b/gdb/config/i386/xm-i386m3.h @@ -0,0 +1,33 @@ +/* Definitions to make GDB run on Mach 3 on an Intel 386 + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* Do implement the attach and detach commands. */ +#define ATTACH_DETACH 1 + +/* Not needeed */ +#define KERNEL_U_ADDR 0 + +#ifndef EMULATOR_BASE +/* For EMULATOR_BASE and EMULATOR_END. + * OSF 1/MK has different values in some other place. + */ +#include <machine/vmparam.h> +#endif /* EMULATOR_BASE */ diff --git a/gdb/config/i386/xm-i386mach.h b/gdb/config/i386/xm-i386mach.h new file mode 100644 index 0000000..eb47bfb --- /dev/null +++ b/gdb/config/i386/xm-i386mach.h @@ -0,0 +1,30 @@ +/* Definitions to make GDB run on Mach on an Intel 386 + Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG)) + +/* <errno.h> only defines this if __STDC__!!! */ +extern int errno; + +extern char *strdup(); diff --git a/gdb/config/i386/xm-i386mk.h b/gdb/config/i386/xm-i386mk.h new file mode 100644 index 0000000..661c9cb --- /dev/null +++ b/gdb/config/i386/xm-i386mk.h @@ -0,0 +1,25 @@ +/* Definitions to make GDB run on Mach 3 OSF 1/MK on an Intel 386 + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HAVE_TERMIO 1 + +#define EMULATOR_BASE 0xa0000000 +#define EMULATOR_END 0xa0040000 + +#include "i386/xm-i386m3.h" diff --git a/gdb/config/i386/xm-i386sco.h b/gdb/config/i386/xm-i386sco.h new file mode 100644 index 0000000..31fa7e6 --- /dev/null +++ b/gdb/config/i386/xm-i386sco.h @@ -0,0 +1,42 @@ +/* Macro defintions for i386, running SCO Unix System V/386 3.2. + Copyright (C) 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* In 3.2v4 <sys/user.h> requires on <sys/dir.h>. */ +#include <sys/types.h> +#include <sys/dir.h> + +#include "i386/xm-i386v.h" + +/* Apparently there is inconsistency among various System V's about what + the name of this field is. */ +#define U_FPSTATE(u) u.u_fps.u_fpstate + +/* SCO 3.2v2 and later have job control. */ +/* SCO 3.2v4 I know has termios; I'm not sure about earlier versions. + GDB does not currently support the termio/job control combination. */ +#undef HAVE_TERMIO +#define HAVE_TERMIOS + +/* SCO's assembler doesn't grok dollar signs in identifiers. + So we use dots instead. This item must be coordinated with G++. */ +#undef CPLUS_MARKER +#define CPLUS_MARKER '.' + +/* Use setpgid instead of setpgrp on SCO */ +#define NEED_POSIX_SETPGID diff --git a/gdb/config/i386/xm-i386v.h b/gdb/config/i386/xm-i386v.h new file mode 100644 index 0000000..480dfd6 --- /dev/null +++ b/gdb/config/i386/xm-i386v.h @@ -0,0 +1,45 @@ +/* Host support for i386. + Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* I'm running gdb 3.4 under 386/ix 2.0.2, which is a derivative of AT&T's +Sys V/386 3.2. + +On some machines, gdb crashes when it's starting up while calling the +vendor's termio tgetent() routine. It always works when run under +itself (actually, under 3.2, it's not an infinitely recursive bug.) +After some poking around, it appears that depending on the environment +size, or whether you're running YP, or the phase of the moon or something, +the stack is not always long-aligned when main() is called, and tgetent() +takes strong offense at that. On some machines this bug never appears, but +on those where it does, it occurs quite reliably. */ +#define ALIGN_STACK_ON_STARTUP + +/* define USG if you are using sys5 /usr/include's */ +#define USG + +#define HAVE_TERMIO + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR 0xe0000000 + diff --git a/gdb/config/i386/xm-i386v32.h b/gdb/config/i386/xm-i386v32.h new file mode 100644 index 0000000..daaac80 --- /dev/null +++ b/gdb/config/i386/xm-i386v32.h @@ -0,0 +1,24 @@ +/* Macro defintions for i386, running System V 3.2. + Copyright (C) 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "i386/xm-i386v.h" + +/* Apparently there is inconsistency among various System V's about what + the name of this field is. */ +#define U_FPSTATE(u) u.u_fps.u_fpstate diff --git a/gdb/config/i386/xm-i386v4.h b/gdb/config/i386/xm-i386v4.h new file mode 100644 index 0000000..7f782db --- /dev/null +++ b/gdb/config/i386/xm-i386v4.h @@ -0,0 +1,27 @@ +/* Macro definitions for GDB on an Intel i386 running SVR4. + Copyright 1991, 1992 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Pick up most of what we need from the generic i386 host include file. */ + +#include "i386/xm-i386v.h" + +/* Pick up more stuff from the generic SVR4 host include file. */ + +#include "xm-sysv4.h" diff --git a/gdb/config/i386/xm-linux.h b/gdb/config/i386/xm-linux.h new file mode 100644 index 0000000..217c6d4 --- /dev/null +++ b/gdb/config/i386/xm-linux.h @@ -0,0 +1,36 @@ +/* Native support for GNU/Linux, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef XM_LINUX_H +#define XM_LINUX_H + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +#define HAVE_TERMIOS + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ +#define KERNEL_U_ADDR 0x0 + +#define NEED_POSIX_SETPGID + +/* Need R_OK etc, but USG isn't defined. */ +#include <unistd.h> + +#endif /* #ifndef XM_LINUX_H */ diff --git a/gdb/config/i386/xm-nbsd.h b/gdb/config/i386/xm-nbsd.h new file mode 100644 index 0000000..b5624ac --- /dev/null +++ b/gdb/config/i386/xm-nbsd.h @@ -0,0 +1,21 @@ +/* Parameters for execution on a i386 running NetBSD, for GDB. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic NetBSD host definitions. */ +#include "xm-nbsd.h" diff --git a/gdb/config/i386/xm-ptx.h b/gdb/config/i386/xm-ptx.h new file mode 100644 index 0000000..99b46cc --- /dev/null +++ b/gdb/config/i386/xm-ptx.h @@ -0,0 +1,41 @@ +/* Definitions to make GDB run on a Sequent Symmetry under ptx, with + Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1992, 1993, 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */ + +#ifdef _SEQUENT_PTX4_ +#include "xm-sysv4.h" +#endif /* _SEQUENT_PTX4_ */ + +/* This machine doesn't have the siginterrupt call. */ +#define NO_SIGINTERRUPT + +#define HAVE_WAIT_STRUCT + +#undef HAVE_TERMIO +#define HAVE_TERMIOS +#define USG + +#define NEED_POSIX_SETPGID + +#define USE_O_NOCTTY + +#define HOST_BYTE_ORDER LITTLE_ENDIAN diff --git a/gdb/config/i386/xm-ptx4.h b/gdb/config/i386/xm-ptx4.h new file mode 100644 index 0000000..bdbdefd --- /dev/null +++ b/gdb/config/i386/xm-ptx4.h @@ -0,0 +1,25 @@ +/* Definitions to make GDB run on a Sequent Symmetry under ptx, with + Weitek 1167 and i387 support. Copyright 1986, 1987, 1989, 1992, + 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */ + +#include "xm-sysv4.h" + +#include "xm-ptx.h" diff --git a/gdb/config/i386/xm-sun386.h b/gdb/config/i386/xm-sun386.h new file mode 100644 index 0000000..51c3b58 --- /dev/null +++ b/gdb/config/i386/xm-sun386.h @@ -0,0 +1,20 @@ +/* Host support for Sun 386i, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN diff --git a/gdb/config/i386/xm-symmetry.h b/gdb/config/i386/xm-symmetry.h new file mode 100644 index 0000000..52e9a9a --- /dev/null +++ b/gdb/config/i386/xm-symmetry.h @@ -0,0 +1,28 @@ +/* Definitions to make GDB run on a Sequent Symmetry under + dynix 3.1, with Weitek 1167 and i387 support. + Copyright 1986, 1987, 1989, 1992, 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */ + +/* This machine doesn't have the siginterrupt call. */ +#define NO_SIGINTERRUPT + +#define HAVE_WAIT_STRUCT + +#define HOST_BYTE_ORDER LITTLE_ENDIAN diff --git a/gdb/config/i386/xm-windows.h b/gdb/config/i386/xm-windows.h new file mode 100644 index 0000000..e083010 --- /dev/null +++ b/gdb/config/i386/xm-windows.h @@ -0,0 +1,35 @@ +/* Definitions for hosting on WIN32, built with Microsoft Visual C/C++, for GDB. + Copyright 1996, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "i386/xm-cygwin.h" + +#undef PRINTF_HAS_LONG_LONG +#undef HAVE_UNISTD_H +#undef HAVE_TERMIO_H +#undef HAVE_TERMIOS_H +#undef HAVE_SGTTY_H +#undef HAVE_SBRK +#define CANT_FORK + +#define MALLOC_INCOMPATIBLE + +#include <malloc.h> + +#define SIGQUIT 3 +#define SIGTRAP 5 diff --git a/gdb/config/i960/mon960.mt b/gdb/config/i960/mon960.mt new file mode 100644 index 0000000..6cd7345 --- /dev/null +++ b/gdb/config/i960/mon960.mt @@ -0,0 +1,6 @@ +# Target: Intel 960 rom monitor +TDEPFILES= i960-tdep.o monitor.o mon960-rom.o ttyflush.o xmodem.o dsrec.o +TM_FILE= tm-mon960.h +SIM_OBS = remote-sim.o +SIM = ../sim/i960/libsim.a + diff --git a/gdb/config/i960/nindy960.mt b/gdb/config/i960/nindy960.mt new file mode 100644 index 0000000..f37c1da --- /dev/null +++ b/gdb/config/i960/nindy960.mt @@ -0,0 +1,3 @@ +# Target: Intel 80960, in an embedded system under the NINDY monitor +TDEPFILES= i960-tdep.o nindy-tdep.o remote-nindy.o nindy.o Onindy.o ttyflush.o +TM_FILE= tm-nindy960.h diff --git a/gdb/config/i960/tm-i960.h b/gdb/config/i960/tm-i960.h new file mode 100644 index 0000000..a6d93b0 --- /dev/null +++ b/gdb/config/i960/tm-i960.h @@ -0,0 +1,372 @@ +/* Parameters for target machine Intel 960, for GDB, the GNU debugger. + Copyright (C) 1990, 1991, 1993 Free Software Foundation, Inc. + Contributed by Intel Corporation. +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Definitions to target GDB to any i960. */ + +#ifndef I80960 +#define I80960 +#endif + +/* Hook for the SYMBOL_CLASS of a parameter when decoding DBX symbol + information. In the i960, parameters can be stored as locals or as + args, depending on the type of the debug record. + + From empirical observation, gcc960 uses N_LSYM to indicate + arguments passed in registers and then copied immediately + to the frame, and N_PSYM to indicate arguments passed in a + g14-relative argument block. */ + +#define DBX_PARM_SYMBOL_CLASS(type) ((type == N_LSYM)? LOC_LOCAL_ARG: LOC_ARG) + +/* Byte order is configurable, but this machine runs little-endian. */ +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* We have IEEE floating point, if we have any float at all. */ + +#define IEEE_FLOAT + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance ip across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(ip) { ip = skip_prologue (ip); } +extern CORE_ADDR skip_prologue (); + +/* Immediately after a function call, return the saved ip. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function + executes some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) (saved_pc_after_call (frame)) +extern CORE_ADDR saved_pc_after_call (); + +/* Stack grows upward */ + +#define INNER_THAN(lhs,rhs) ((lhs) > (rhs)) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ +#define NUM_REGS 40 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES { \ + /* 0 */ "pfp", "sp", "rip", "r3", "r4", "r5", "r6", "r7", \ + /* 8 */ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",\ + /* 16 */ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + /* 24 */ "g8", "g9", "g10", "g11", "g12", "g13", "g14", "fp", \ + /* 32 */ "pcw", "ac", "tc", "ip", "fp0", "fp1", "fp2", "fp3",\ +} + +/* Register numbers of various important registers (used to index + into arrays of register names and register values). */ + +#define R0_REGNUM 0 /* First local register */ +#define SP_REGNUM 1 /* Contains address of top of stack */ +#define RIP_REGNUM 2 /* Return instruction pointer (local r2) */ +#define R15_REGNUM 15 /* Last local register */ +#define G0_REGNUM 16 /* First global register */ +#define G13_REGNUM 29 /* g13 - holds struct return address */ +#define G14_REGNUM 30 /* g14 - ptr to arg block / leafproc return address */ +#define FP_REGNUM 31 /* Contains address of executing stack frame */ +#define PCW_REGNUM 32 /* process control word */ +#define ACW_REGNUM 33 /* arithmetic control word */ +#define TCW_REGNUM 34 /* trace control word */ +#define IP_REGNUM 35 /* instruction pointer */ +#define FP0_REGNUM 36 /* First floating point register */ + +/* Some registers have more than one name */ + +#define PC_REGNUM IP_REGNUM /* GDB refers to ip as the Program Counter */ +#define PFP_REGNUM R0_REGNUM /* Previous frame pointer */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES ((36*4) + (4*10)) + +/* Index within `registers' of the first byte of the space for register N. */ + +#define REGISTER_BYTE(N) ( (N) < FP0_REGNUM ? \ + (4*(N)) : ((10*(N)) - (6*FP0_REGNUM)) ) + +/* The i960 has register windows, sort of. */ + +#define HAVE_REGISTER_WINDOWS + +/* Is this register part of the register window system? A yes answer + implies that 1) The name of this register will not be the same in + other frames, and 2) This register is automatically "saved" upon + subroutine calls and thus there is no need to search more than one + stack frame for it. + + On the i960, in fact, the name of this register in another frame is + "mud" -- there is no overlap between the windows. Each window is + simply saved into the stack (true for our purposes, after having been + flushed; normally they reside on-chip and are restored from on-chip + without ever going to memory). */ + +#define REGISTER_IN_WINDOW_P(regnum) ((regnum) <= R15_REGNUM) + +/* Number of bytes of storage in the actual machine representation + for register N. On the i960, all regs are 4 bytes except for floating + point, which are 10. NINDY only sends us 8 byte values for these, + which is a pain, but VxWorks handles this correctly, so we must. */ + +#define REGISTER_RAW_SIZE(N) ( (N) < FP0_REGNUM ? 4 : 10 ) + +/* Number of bytes of storage in the program's representation for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) ( (N) < FP0_REGNUM ? 4 : 8 ) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 10 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion from raw format to virtual + format. */ + +#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM) + +#include "floatformat.h" + +#define TARGET_LONG_DOUBLE_FORMAT &floatformat_i960_ext + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + DOUBLEST val; \ + floatformat_to_doublest (&floatformat_i960_ext, (FROM), &val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + DOUBLEST val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + floatformat_from_doublest (&floatformat_i960_ext, &val, (TO)); \ +} + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) ((N) < FP0_REGNUM ? \ + builtin_type_int : builtin_type_double) + +/* Macros for understanding function return values... */ + +/* Does the specified function use the "struct returning" convention + or the "value returning" convention? The "value returning" convention + almost invariably returns the entire value in registers. The + "struct returning" convention often returns the entire value in + memory, and passes a pointer (out of or into the function) saying + where the value (is or should go). + + Since this sometimes depends on whether it was compiled with GCC, + this is also an argument. This is used in call_function to build a + stack, and in value_being_returned to print return values. + + On i960, a structure is returned in registers g0-g3, if it will fit. + If it's more than 16 bytes long, g13 pointed to it on entry. */ + +extern use_struct_convention_fn i960_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) i960_use_struct_convention (gcc_p, type) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. This is only called if USE_STRUCT_CONVENTION for this + type is 0. + + On the i960 we just take as many bytes as we need from G0 through G3. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy(VALBUF, REGBUF+REGISTER_BYTE(G0_REGNUM), TYPE_LENGTH (TYPE)) + +/* If USE_STRUCT_CONVENTION produces a 1, + extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). + + Address of where to put structure was passed in in global + register g13 on entry. God knows what's in g13 now. The + (..., 0) below is to make it appear to return a value, though + actually all it does is call error(). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (error("Don't know where large structure is returned on i960"), 0) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format, for "value returning" functions. + + For 'return' command: not (yet) implemented for i960. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + error ("Returning values from functions is not implemented in i960 gdb") + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + error ("Returning values from functions is not implemented in i960 gdb") + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +/* We cache information about saved registers in the frame structure, + to save us from having to re-scan function prologues every time + a register in a non-current frame is accessed. */ + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs *fsr; \ + CORE_ADDR arg_pointer; + +/* Zero the frame_saved_regs pointer when the frame is initialized, + so that FRAME_FIND_SAVED_REGS () will know to allocate and + initialize a frame_saved_regs struct the first time it is called. + Set the arg_pointer to -1, which is not valid; 0 and other values + indicate real, cached values. */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + ((fi)->fsr = 0, (fi)->arg_pointer = -1) + +/* On the i960, we get the chain pointer by reading the PFP saved + on the stack and clearing the status bits. */ + +#define FRAME_CHAIN(thisframe) \ + (read_memory_integer (FRAME_FP(thisframe), 4) & ~0xf) + +/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one + and has no caller. + + On the i960, each various target system type must define FRAME_CHAIN_VALID, + since it differs between NINDY and VxWorks, the two currently supported + targets types. We leave it undefined here. */ + + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + { (FRAMELESS) = (leafproc_return ((FI)->pc) != 0); } + +/* Note that in the i960 architecture the return pointer is saved in the + *caller's* stack frame. + + Make sure to zero low-order bits because of bug in 960CA A-step part + (instruction addresses should always be word-aligned anyway). */ + +#define FRAME_SAVED_PC(frame) \ + ((read_memory_integer(FRAME_CHAIN(frame)+8,4)) & ~3) + +/* On the i960, FRAME_ARGS_ADDRESS should return the value of + g14 as passed into the frame, if known. We need a function for this. + We cache this value in the frame info if we've already looked it up. */ + +#define FRAME_ARGS_ADDRESS(fi) \ + (((fi)->arg_pointer != -1)? (fi)->arg_pointer: frame_args_address (fi, 0)) +extern CORE_ADDR frame_args_address (); /* i960-tdep.c */ + +/* This is the same except it should return 0 when + it does not really know where the args are, rather than guessing. + This value is not cached since it is only used infrequently. */ + +#define FRAME_ARGS_ADDRESS_CORRECT(fi) (frame_args_address (fi, 1)) + +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +/* Set NUMARGS to the number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Produce the positions of the saved registers in a stack frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info_addr, sr) \ + frame_find_saved_regs (frame_info_addr, &sr) +extern void frame_find_saved_regs(); /* See i960-tdep.c */ + +/* Things needed for making calls to functions in the inferior process */ + +/* Push an empty stack frame, to record the current ip, etc. + + Not (yet?) implemented for i960. */ + +#define PUSH_DUMMY_FRAME \ +error("Function calls into the inferior process are not supported on the i960") + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ + pop_frame () + + +/* This sequence of words is the instructions + + callx 0x00000000 + fmark + */ + +/* #define CALL_DUMMY { 0x86003000, 0x00000000, 0x66003e00 } */ + +/* #define CALL_DUMMY_START_OFFSET 0 *//* Start execution at beginning of dummy */ + +/* Indicate that we don't support calling inferior child functions. */ + +#undef CALL_DUMMY + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at 'dummyname'. + + Ignore arg count on i960. */ + +/* #define FIX_CALL_DUMMY(dummyname, fun, nargs) *(((int *)dummyname)+1) = fun */ + +#undef FIX_CALL_DUMMY + + +/* Interface definitions for kernel debugger KDB */ +/* (Not relevant to i960.) */ diff --git a/gdb/config/i960/tm-mon960.h b/gdb/config/i960/tm-mon960.h new file mode 100644 index 0000000..e441e05 --- /dev/null +++ b/gdb/config/i960/tm-mon960.h @@ -0,0 +1,70 @@ +/* Parameters for Intel 960 running MON960 monitor, for GDB, the GNU debugger. + Copyright (C) 1990-1991 Free Software Foundation, Inc. + Contributed by Intel Corporation and Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/***************************************************************************** + * Definitions to target GDB to an i960 debugged over a serial line. + ******************************************************************************/ + +#include "i960/tm-i960.h" + +/* forward declarations */ +#ifdef __STDC__ +struct frame_info; +#endif + +/* redefined from tm-i960.h */ +/* Number of machine registers */ +#undef NUM_REGS +#define NUM_REGS 40 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ +#undef REGISTER_NAMES +#define REGISTER_NAMES { \ + /* 0 */ "pfp", "sp", "rip", "r3", "r4", "r5", "r6", "r7", \ + /* 8 */ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",\ + /* 16 */ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + /* 24 */ "g8", "g9", "g10", "g11", "g12", "g13", "g14", "fp", \ + /* 32 */ "pc", "ac", "tc", "ip", "fp0", "fp1", "fp2", "fp3",\ +} + +/* Override the standard gdb prompt when compiled for this target. */ + +#define DEFAULT_PROMPT "(gdb960) " + +/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one + and has no caller. + + On the i960, each various target system type defines FRAME_CHAIN_VALID, + since it differs between Nindy, Mon960 and VxWorks, the currently supported + target types. */ + +extern int mon960_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) mon960_frame_chain_valid (chain, thisframe) + +/* Sequence of bytes for breakpoint instruction */ + +#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} + +/* Amount ip must be decremented by after a breakpoint. + * This is often the number of bytes in BREAKPOINT but not always. + */ + +#define DECR_PC_AFTER_BREAK 4 diff --git a/gdb/config/i960/tm-nindy960.h b/gdb/config/i960/tm-nindy960.h new file mode 100644 index 0000000..d0c46c0 --- /dev/null +++ b/gdb/config/i960/tm-nindy960.h @@ -0,0 +1,106 @@ +/* Parameters for Intel 960 running NINDY monitor, for GDB, the GNU debugger. + Copyright (C) 1990-1991 Free Software Foundation, Inc. + Contributed by Intel Corporation and Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/***************************************************************************** + * Definitions to target GDB to an i960 debugged over a serial line. + ******************************************************************************/ + +#include "i960/tm-i960.h" + +/* forward declarations */ +#ifdef __STDC__ +struct frame_info; +#endif + +/* Override the standard gdb prompt when compiled for this target. */ + +#define DEFAULT_PROMPT "(gdb960) " + +/* Additional command line options accepted by nindy gdb's, for handling + the remote-nindy.c interface. These should really be target-specific + rather than architecture-specific. */ + +extern int nindy_old_protocol; /* nonzero if old NINDY serial protocol */ +extern int nindy_initial_brk; /* Send a BREAK to reset board first */ +extern char *nindy_ttyname; /* Name of serial port to talk to nindy */ + +#define ADDITIONAL_OPTIONS \ + {"O", no_argument, &nindy_old_protocol, 1}, \ + {"brk", no_argument, &nindy_initial_brk, 1}, \ + {"ser", required_argument, 0, 1004}, /* 1004 is magic cookie for ADDL_CASES */ + +#define ADDITIONAL_OPTION_CASES \ + case 1004: /* -ser option: remote nindy auto-start */ \ + nindy_ttyname = optarg; \ + break; + +#define ADDITIONAL_OPTION_HELP \ + "\ + -O Use old protocol to talk to a Nindy target\n\ + -brk Send a break to a Nindy target to reset it.\n\ + -ser SERIAL Open remote Nindy session to SERIAL port.\n\ +" + +/* If specified on the command line, open tty for talking to nindy, + and download the executable file if one was specified. */ + +#define ADDITIONAL_OPTION_HANDLER \ + if (!SET_TOP_LEVEL () && nindy_ttyname) { \ + nindy_open (nindy_ttyname, !batch); \ + if (!SET_TOP_LEVEL () && execarg) { \ + target_load (execarg, !batch); \ + } \ + } + +/* If configured for i960 target, we take control before main loop + and demand that we configure for a nindy target. */ + +#define BEFORE_MAIN_LOOP_HOOK \ + nindy_before_main_loop(); + +extern void +nindy_before_main_loop(); /* In remote-nindy.c */ + +/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one + and has no caller. + + On the i960, each various target system type defines FRAME_CHAIN_VALID, + since it differs between NINDY and VxWorks, the two currently supported + targets types. */ + +extern int nindy_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) nindy_frame_chain_valid (chain, thisframe) + +extern int +nindy_frame_chain_valid(); /* See nindy-tdep.c */ + +/* Sequence of bytes for breakpoint instruction */ + +#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} + +/* Amount ip must be decremented by after a breakpoint. + * This is often the number of bytes in BREAKPOINT but not always. + */ + +#define DECR_PC_AFTER_BREAK 0 + +#undef REGISTER_CONVERT_TO_VIRTUAL +#undef REGISTER_CONVERT_TO_RAW +#undef REGISTER_CONVERTIBLE diff --git a/gdb/config/i960/tm-vx960.h b/gdb/config/i960/tm-vx960.h new file mode 100644 index 0000000..17e2811 --- /dev/null +++ b/gdb/config/i960/tm-vx960.h @@ -0,0 +1,53 @@ +/* Parameters for VxWorks Intel 960's, for GDB, the GNU debugger. + Copyright (C) 1986-1991 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "i960/tm-i960.h" + +/* Under VxWorks the IP isn't filled in. Skip it, go with RIP, which has + the real value. */ +#undef PC_REGNUM +#define PC_REGNUM RIP_REGNUM + +#define GDBINIT_FILENAME ".vxgdbinit" + +#define DEFAULT_PROMPT "(vxgdb) " + +/* We have more complex, useful breakpoints on the target. + Amount ip must be decremented by after a breakpoint. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */ + +#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe) + +/* Breakpoint patching is handled at the target end in VxWorks. */ +/* #define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} */ + +/* Number of registers in a ptrace_getregs call. */ + +#define VX_NUM_REGS (16 + 16 + 3) + +/* Number of registers in a ptrace_getfpregs call. */ + + /* @@ Can't use this -- the rdb library for the 960 target + doesn't support setting or retrieving FP regs. KR */ + +/* #define VX_SIZE_FPREGS (REGISTER_RAW_SIZE (FP0_REGNUM) * 4) */ diff --git a/gdb/config/i960/vxworks960.mt b/gdb/config/i960/vxworks960.mt new file mode 100644 index 0000000..ad32934 --- /dev/null +++ b/gdb/config/i960/vxworks960.mt @@ -0,0 +1,6 @@ +# Target: VxWorks running on an Intel 960 +TDEPFILES= i960-tdep.o remote-vx.o remote-vx960.o xdr_ld.o xdr_ptrace.o xdr_rdb.o +TM_FILE= tm-vx960.h + +# Define this for the vx-share routines, which don't see param.h. +MT_CFLAGS= -DI80960 diff --git a/gdb/config/m32r/m32r.mt b/gdb/config/m32r/m32r.mt new file mode 100644 index 0000000..8b95705 --- /dev/null +++ b/gdb/config/m32r/m32r.mt @@ -0,0 +1,7 @@ +# Target: Mitsubishi m32r processor +TDEPFILES= m32r-tdep.o monitor.o m32r-rom.o dsrec.o +TM_FILE= tm-m32r.h +SIM_OBS = remote-sim.o +SIM = ../sim/m32r/libsim.a +GDBSERVER_DEPFILES= low-sim.o +GDBSERVER_LIBS = ../../sim/m32r/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a ../../opcodes/libopcodes.a diff --git a/gdb/config/m32r/tm-m32r.h b/gdb/config/m32r/tm-m32r.h new file mode 100644 index 0000000..8273b4e --- /dev/null +++ b/gdb/config/m32r/tm-m32r.h @@ -0,0 +1,234 @@ +/* Parameters for execution on a Mitsubishi m32r processor. + Copyright 1996, 1997 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Used by mswin. */ +#define TARGET_M32R 1 + +/* mvs_check TARGET_BYTE_ORDER BIG_ENDIAN */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* mvs_check REGISTER_NAMES */ +#define REGISTER_NAMES \ +{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10", "r11", "r12", "fp", "lr", "sp", \ + "psw", "cbr", "spi", "spu", "bpc", "pc", "accl", "acch", \ + /* "cond", "sm", "bsm", "ie", "bie", "bcarry", */ \ +} +/* mvs_check NUM_REGS */ +#define NUM_REGS 24 + +/* mvs_check REGISTER_SIZE */ +#define REGISTER_SIZE 4 +/* mvs_check MAX_REGISTER_RAW_SIZE */ +#define MAX_REGISTER_RAW_SIZE 4 + +/* mvs_check *_REGNUM */ +#define R0_REGNUM 0 +#define STRUCT_RETURN_REGNUM 0 +#define ARG0_REGNUM 0 +#define ARGLAST_REGNUM 3 +#define V0_REGNUM 0 +#define V1_REGNUM 1 +#define FP_REGNUM 13 +#define RP_REGNUM 14 +#define SP_REGNUM 15 +#define PSW_REGNUM 16 +#define CBR_REGNUM 17 +#define SPI_REGNUM 18 +#define SPU_REGNUM 19 +#define BPC_REGNUM 20 +#define PC_REGNUM 21 +#define ACCL_REGNUM 22 +#define ACCH_REGNUM 23 + +/* mvs_check REGISTER_BYTES */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* mvs_check REGISTER_VIRTUAL_TYPE */ +#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int + +/* mvs_check REGISTER_BYTE */ +#define REGISTER_BYTE(REG) ((REG) * 4) +/* mvs_check REGISTER_VIRTUAL_SIZE */ +#define REGISTER_VIRTUAL_SIZE(REG) 4 +/* mvs_check REGISTER_RAW_SIZE */ +#define REGISTER_RAW_SIZE(REG) 4 + +/* mvs_check MAX_REGISTER_VIRTUAL_SIZE */ +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* mvs_check BREAKPOINT */ +#define BREAKPOINT {0x10, 0xf1} + +/* mvs_no_check FUNCTION_START_OFFSET */ +#define FUNCTION_START_OFFSET 0 + +/* mvs_check DECR_PC_AFTER_BREAK */ +#define DECR_PC_AFTER_BREAK 0 + +/* mvs_check INNER_THAN */ +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* mvs_check SAVED_PC_AFTER_CALL */ +#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM) + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +/* Define other aspects of the stack frame. + We keep the offsets of all saved registers, 'cause we need 'em a lot! + We also keep the current size of the stack frame, and whether + the frame pointer is valid (for frameless functions, and when we're + still in the prologue of a function with a frame) */ + +/* mvs_check EXTRA_FRAME_INFO */ +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs fsr; \ + int framesize; \ + int using_frame_pointer; + + +extern void m32r_init_extra_frame_info PARAMS ((struct frame_info *fi)); +/* mvs_check INIT_EXTRA_FRAME_INFO */ +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) m32r_init_extra_frame_info (fi) +/* mvs_no_check INIT_FRAME_PC */ +#define INIT_FRAME_PC /* Not necessary */ + +extern void +m32r_frame_find_saved_regs PARAMS ((struct frame_info *fi, + struct frame_saved_regs *regaddr)); + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +/* mvs_check FRAME_FIND_SAVED_REGS */ +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + m32r_frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +extern CORE_ADDR m32r_frame_chain PARAMS ((struct frame_info *fi)); +/* mvs_check FRAME_CHAIN */ +#define FRAME_CHAIN(fi) m32r_frame_chain (fi) + +#define FRAME_CHAIN_VALID(fp, frame) generic_frame_chain_valid (fp, frame) + +extern CORE_ADDR m32r_find_callers_reg PARAMS ((struct frame_info *fi, + int regnum)); +extern CORE_ADDR m32r_frame_saved_pc PARAMS((struct frame_info *)); +/* mvs_check FRAME_SAVED_PC */ +#define FRAME_SAVED_PC(fi) m32r_frame_saved_pc (fi) + +/* mvs_check EXTRACT_RETURN_VALUE */ +#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \ + memcpy ((VALBUF), \ + (char *)(REGBUF) + REGISTER_BYTE (V0_REGNUM) + \ + ((TYPE_LENGTH (TYPE) > 4 ? 8 : 4) - TYPE_LENGTH (TYPE)), \ + TYPE_LENGTH (TYPE)) + +/* mvs_check STORE_RETURN_VALUE */ +#define STORE_RETURN_VALUE(TYPE, VALBUF) \ + write_register_bytes(REGISTER_BYTE (V0_REGNUM) + \ + ((TYPE_LENGTH (TYPE) > 4 ? 8:4) - TYPE_LENGTH (TYPE)),\ + (VALBUF), TYPE_LENGTH (TYPE)); + +extern CORE_ADDR m32r_skip_prologue PARAMS ((CORE_ADDR pc)); +/* mvs_check SKIP_PROLOGUE */ +#define SKIP_PROLOGUE(pc) pc = m32r_skip_prologue (pc) + +/* mvs_no_check FRAME_ARGS_SKIP */ +#define FRAME_ARGS_SKIP 0 + +/* mvs_no_check FRAME_ARGS_ADDRESS */ +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) +/* mvs_no_check FRAME_LOCALS_ADDRESS */ +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) +/* mvs_no_check FRAME_NUM_ARGS */ +#define FRAME_NUM_ARGS(val, fi) ((val) = -1) + +#define COERCE_FLOAT_TO_DOUBLE 1 + +#define TARGET_WRITE_SP m32r_write_sp + + + + + + +/* struct passing and returning stuff */ +#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \ + write_register (0, STRUCT_ADDR) + +extern use_struct_convention_fn m32r_use_struct_convention; +#define USE_STRUCT_CONVENTION(GCC_P, TYPE) m32r_use_struct_convention (GCC_P, TYPE) + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \ + REGISTER_RAW_SIZE (V0_REGNUM)) + +#define REG_STRUCT_HAS_ADDR(gcc_p,type) (TYPE_LENGTH (type) > 8) + + +/* generic dummy frame stuff */ + +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) + + +/* target-specific dummy_frame stuff */ + +extern struct frame_info *m32r_pop_frame PARAMS ((struct frame_info *frame)); +/* mvs_check POP_FRAME */ +#define POP_FRAME m32r_pop_frame (get_current_frame ()) + +/* mvs_no_check STACK_ALIGN */ +/* #define STACK_ALIGN(x) ((x + 3) & ~3) */ + +extern CORE_ADDR m32r_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +extern CORE_ADDR m32r_push_arguments PARAMS ((int nargs, + struct value **args, + CORE_ADDR sp, + unsigned char struct_return, + CORE_ADDR struct_addr)); + + + +/* mvs_no_check PUSH_ARGUMENTS */ +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = m32r_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +#define PUSH_RETURN_ADDRESS(PC, SP) m32r_push_return_address (PC, SP) + +/* override the standard get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_LENGTH (0) +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define FIX_CALL_DUMMY(DUMMY1, STARTADDR, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define CALL_DUMMY_ADDRESS() entry_point_address () diff --git a/gdb/config/m68k/3b1.mh b/gdb/config/m68k/3b1.mh new file mode 100644 index 0000000..2516cce --- /dev/null +++ b/gdb/config/m68k/3b1.mh @@ -0,0 +1,12 @@ +# Host: AT&T 3b1/Unix pc +# I don't think cc has been tried. -traditional for <sys/ioctl.h> +# (not sure whether necessary). +CC= gcc -traditional +# GCC runs out of virtual memory. +# A separate CC for pinsn routines is no longer supported, though. +# FIXME -- someone unlucky enough to have a 3B1, let bug-gcc@prep.ai.mit.edu +# know what works and what fails on the 3B1. +#PINSN_CC= cc + +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o +XM_FILE= xm-3b1.h diff --git a/gdb/config/m68k/3b1.mt b/gdb/config/m68k/3b1.mt new file mode 100644 index 0000000..4c5d9d4 --- /dev/null +++ b/gdb/config/m68k/3b1.mt @@ -0,0 +1,3 @@ +# Target: AT&T 3b1/Unix pc +TDEPFILES= m68k-tdep.o +TM_FILE= tm-3b1.h diff --git a/gdb/config/m68k/altos.mh b/gdb/config/m68k/altos.mh new file mode 100644 index 0000000..1073751 --- /dev/null +++ b/gdb/config/m68k/altos.mh @@ -0,0 +1,5 @@ +# Host: Altos 3068 (m68k, System V release 2) + +XM_FILE= xm-altos.h +XDEPFILES= infptrace.o inftarg.o fork-child.o altos-xdep.o + diff --git a/gdb/config/m68k/altos.mt b/gdb/config/m68k/altos.mt new file mode 100644 index 0000000..521e958 --- /dev/null +++ b/gdb/config/m68k/altos.mt @@ -0,0 +1,3 @@ +# Target: Altos 3068 (m68k, System V release 2) +TDEPFILES= m68k-tdep.o +TM_FILE= tm-altos.h diff --git a/gdb/config/m68k/apollo68b.mh b/gdb/config/m68k/apollo68b.mh new file mode 100644 index 0000000..6f55497 --- /dev/null +++ b/gdb/config/m68k/apollo68b.mh @@ -0,0 +1,6 @@ +# Host: Apollo m68k, BSD mode. + +XM_FILE= xm-apollo68b.h +XDEPFILES= +NAT_FILE= nm-apollo68b.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o a68v-nat.o diff --git a/gdb/config/m68k/apollo68b.mt b/gdb/config/m68k/apollo68b.mt new file mode 100644 index 0000000..2383d3b --- /dev/null +++ b/gdb/config/m68k/apollo68b.mt @@ -0,0 +1,3 @@ +# Target: Apollo m68k in BSD mode +TDEPFILES= m68k-tdep.o dstread.o +TM_FILE= tm-apollo68b.h diff --git a/gdb/config/m68k/apollo68v.mh b/gdb/config/m68k/apollo68v.mh new file mode 100644 index 0000000..9204f11 --- /dev/null +++ b/gdb/config/m68k/apollo68v.mh @@ -0,0 +1,11 @@ +# Host: Apollo, System V mode (?) + +XM_FILE= xm-apollo68v.h +XM_CLIBS= -lPW +XDEPFILES= + +NAT_FILE= nm-apollo68v.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o a68v-nat.o + +RANLIB=echo >/dev/null +CC= cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_SYS_FILE diff --git a/gdb/config/m68k/cisco.mt b/gdb/config/m68k/cisco.mt new file mode 100644 index 0000000..bc2e921 --- /dev/null +++ b/gdb/config/m68k/cisco.mt @@ -0,0 +1,3 @@ +# Target: Cisco Router with 68K processor +TDEPFILES= m68k-tdep.o corelow.o core-aout.o +TM_FILE= tm-cisco.h diff --git a/gdb/config/m68k/delta68.mh b/gdb/config/m68k/delta68.mh new file mode 100644 index 0000000..5492af0 --- /dev/null +++ b/gdb/config/m68k/delta68.mh @@ -0,0 +1,5 @@ +# Host: Motorola Delta Series sysV68 R3V7.1 + +XM_FILE= xm-delta68.h +NAT_FILE= nm-delta68.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o delta68-nat.o diff --git a/gdb/config/m68k/delta68.mt b/gdb/config/m68k/delta68.mt new file mode 100644 index 0000000..2761329 --- /dev/null +++ b/gdb/config/m68k/delta68.mt @@ -0,0 +1,3 @@ +# Motorola Delta Series sysV68 R3V7.1 +TDEPFILES= m68k-tdep.o +TM_FILE= tm-delta68.h diff --git a/gdb/config/m68k/dpx2.mh b/gdb/config/m68k/dpx2.mh new file mode 100644 index 0000000..4f22ed53 --- /dev/null +++ b/gdb/config/m68k/dpx2.mh @@ -0,0 +1,7 @@ +# Host: Bull DPX2 (68k, System V release 3) + +XM_FILE= xm-dpx2.h +XDEPFILES= + +NAT_FILE= nm-dpx2.h +NATDEPFILES= infptrace.o corelow.o core-aout.o inftarg.o dpx2-nat.o fork-child.o diff --git a/gdb/config/m68k/dpx2.mt b/gdb/config/m68k/dpx2.mt new file mode 100644 index 0000000..5bbbbe6 --- /dev/null +++ b/gdb/config/m68k/dpx2.mt @@ -0,0 +1,3 @@ +# Target: Bull DPX2 (68k, System V release 3) +TDEPFILES= m68k-tdep.o +TM_FILE= tm-dpx2.h diff --git a/gdb/config/m68k/es1800.mt b/gdb/config/m68k/es1800.mt new file mode 100644 index 0000000..d809c61 --- /dev/null +++ b/gdb/config/m68k/es1800.mt @@ -0,0 +1,9 @@ +# Target: Ericsson ES-1800 emulator (remote) for m68k. + +# remote-es.o should perhaps be part of the standard monitor.mt +# configuration, if it is desirable to reduce the number of different +# configurations. However, before that happens remote-es.c has to be +# fixed to compile on a DOS host. + +TDEPFILES= m68k-tdep.o remote-es.o +TM_FILE= tm-es1800.h diff --git a/gdb/config/m68k/hp300bsd.mh b/gdb/config/m68k/hp300bsd.mh new file mode 100644 index 0000000..3ca0362 --- /dev/null +++ b/gdb/config/m68k/hp300bsd.mh @@ -0,0 +1,7 @@ +# Host: Hewlett-Packard 9000 series 300, running BSD + +XM_FILE= xm-hp300bsd.h +XDEPFILES= + +NAT_FILE= nm-hp300bsd.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o diff --git a/gdb/config/m68k/hp300bsd.mt b/gdb/config/m68k/hp300bsd.mt new file mode 100644 index 0000000..cbcc5ed --- /dev/null +++ b/gdb/config/m68k/hp300bsd.mt @@ -0,0 +1,3 @@ +# Target: Hewlett-Packard 9000 series 300, running BSD +TDEPFILES= m68k-tdep.o +TM_FILE= tm-hp300bsd.h diff --git a/gdb/config/m68k/hp300hpux.mh b/gdb/config/m68k/hp300hpux.mh new file mode 100644 index 0000000..8ceb187 --- /dev/null +++ b/gdb/config/m68k/hp300hpux.mh @@ -0,0 +1,8 @@ +# Host: Hewlett-Packard 9000 series 300, running HPUX +# The following is true because gcc uses a different .o file format +# than the native HPUX compiler + +XM_FILE= xm-hp300hpux.h + +NAT_FILE= nm-hp300hpux.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o hp300ux-nat.o corelow.o core-aout.o diff --git a/gdb/config/m68k/hp300hpux.mt b/gdb/config/m68k/hp300hpux.mt new file mode 100644 index 0000000..0fa801d --- /dev/null +++ b/gdb/config/m68k/hp300hpux.mt @@ -0,0 +1,8 @@ +# Target: Hewlett-Packard 9000 series 300, running HPUX + +#msg Note that GDB can only read symbols from programs that were +#msg compiled with GCC using GAS. +#msg + +TDEPFILES= m68k-tdep.o +TM_FILE= tm-hp300hpux.h diff --git a/gdb/config/m68k/isi.mh b/gdb/config/m68k/isi.mh new file mode 100644 index 0000000..c406b4c --- /dev/null +++ b/gdb/config/m68k/isi.mh @@ -0,0 +1,5 @@ +# Host: ISI Optimum V (3.05) under 4.3bsd. +# corelow.o commented out because core dumps are broken on this machine, +# as of GDB 4.8, according to lam@tfs.com +XDEPFILES= infptrace.o inftarg.o fork-child.o core-aout.o isi-xdep.o +XM_FILE= xm-isi.h diff --git a/gdb/config/m68k/isi.mt b/gdb/config/m68k/isi.mt new file mode 100644 index 0000000..7c4cdee --- /dev/null +++ b/gdb/config/m68k/isi.mt @@ -0,0 +1,3 @@ +# Target: ISI Optimum V (3.05) under 4.3bsd. +TDEPFILES= +TM_FILE= tm-isi.h diff --git a/gdb/config/m68k/linux.mh b/gdb/config/m68k/linux.mh new file mode 100644 index 0000000..c3850b1 --- /dev/null +++ b/gdb/config/m68k/linux.mh @@ -0,0 +1,9 @@ +# Host: Motorola m68k running Linux + +XM_FILE= xm-linux.h +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-linux.h +NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o core-aout.o core-regset.o m68klinux-nat.o + +GDBSERVER_DEPFILES= low-linux.o diff --git a/gdb/config/m68k/linux.mt b/gdb/config/m68k/linux.mt new file mode 100644 index 0000000..0c0a149 --- /dev/null +++ b/gdb/config/m68k/linux.mt @@ -0,0 +1,3 @@ +# Target: Motorola m68k with a.out and ELF +TDEPFILES= m68k-tdep.o +TM_FILE= tm-linux.h diff --git a/gdb/config/m68k/m68klynx.mh b/gdb/config/m68k/m68klynx.mh new file mode 100644 index 0000000..48fdf29 --- /dev/null +++ b/gdb/config/m68k/m68klynx.mh @@ -0,0 +1,11 @@ +# Host: Motorola 680x0 running LynxOS + +XM_FILE= xm-m68klynx.h +XM_CLIBS= -lbsd +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-m68klynx.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o + +GDBSERVER_LIBS= -lbsd +GDBSERVER_DEPFILES= low-lynx.o diff --git a/gdb/config/m68k/m68klynx.mt b/gdb/config/m68k/m68klynx.mt new file mode 100644 index 0000000..4aeac96 --- /dev/null +++ b/gdb/config/m68k/m68klynx.mt @@ -0,0 +1,4 @@ +# Target: Motorola 680x0 running LynxOS +TDEPFILES= coff-solib.o m68k-tdep.o +# m68kly-tdep.o +TM_FILE= tm-m68klynx.h diff --git a/gdb/config/m68k/m68kv4.mh b/gdb/config/m68k/m68kv4.mh new file mode 100644 index 0000000..f2db3d9 --- /dev/null +++ b/gdb/config/m68k/m68kv4.mh @@ -0,0 +1,7 @@ +# Host: Motorola 680x0 running SVR4 (Commodore Amiga amix or Atari TT ASV) + +XM_FILE= xm-m68kv4.h +XDEPFILES= + +NAT_FILE= nm-sysv4.h +NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o diff --git a/gdb/config/m68k/m68kv4.mt b/gdb/config/m68k/m68kv4.mt new file mode 100644 index 0000000..fcabb17 --- /dev/null +++ b/gdb/config/m68k/m68kv4.mt @@ -0,0 +1,3 @@ +# Target: Motorola 680x0 running SVR4 (Commodore Amiga amix or Atari TT ASV) +TDEPFILES= m68k-tdep.o +TM_FILE= tm-m68kv4.h diff --git a/gdb/config/m68k/monitor.mt b/gdb/config/m68k/monitor.mt new file mode 100644 index 0000000..46b1c55 --- /dev/null +++ b/gdb/config/m68k/monitor.mt @@ -0,0 +1,3 @@ +# Target: Motorola m68k embedded (EST emulator, rom68k and bug monitors) +TDEPFILES= m68k-tdep.o monitor.o remote-est.o cpu32bug-rom.o rom68k-rom.o abug-rom.o dbug-rom.o dsrec.o +TM_FILE= tm-monitor.h diff --git a/gdb/config/m68k/nbsd.mh b/gdb/config/m68k/nbsd.mh new file mode 100644 index 0000000..a9e3942 --- /dev/null +++ b/gdb/config/m68k/nbsd.mh @@ -0,0 +1,5 @@ +# Host: Motorola m68k running NetBSD +XDEPFILES= ser-tcp.o +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o m68knbsd-nat.o +XM_FILE= xm-nbsd.h +NAT_FILE= nm-nbsd.h diff --git a/gdb/config/m68k/nbsd.mt b/gdb/config/m68k/nbsd.mt new file mode 100644 index 0000000..1ad2882 --- /dev/null +++ b/gdb/config/m68k/nbsd.mt @@ -0,0 +1,3 @@ +# Target: Motorola m68k running NetBSD +TDEPFILES= m68k-tdep.o solib.o +TM_FILE= tm-nbsd.h diff --git a/gdb/config/m68k/news.mh b/gdb/config/m68k/news.mh new file mode 100644 index 0000000..e94af18 --- /dev/null +++ b/gdb/config/m68k/news.mh @@ -0,0 +1,5 @@ +# Host: Sony news series 700/800/900 (68020) running NewsOS version 3. +XDEPFILES= news-xdep.o +XM_FILE= xm-news.h +NAT_FILE= nm-news.h +NATDEPFILES= inftarg.o fork-child.o corelow.o core-aout.o infptrace.o diff --git a/gdb/config/m68k/news.mt b/gdb/config/m68k/news.mt new file mode 100644 index 0000000..42f2417 --- /dev/null +++ b/gdb/config/m68k/news.mt @@ -0,0 +1,3 @@ +# Target: Sony news series 700/800/900 (68020) running NewsOS version 3. +TDEPFILES= m68k-tdep.o +TM_FILE= tm-news.h diff --git a/gdb/config/m68k/news1000.mh b/gdb/config/m68k/news1000.mh new file mode 100644 index 0000000..b1bf0a5 --- /dev/null +++ b/gdb/config/m68k/news1000.mh @@ -0,0 +1,3 @@ +# Host: Sony news series 1000 (68030) running NewsOS version 3. +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o news-xdep.o +XM_FILE= xm-news1000.h diff --git a/gdb/config/m68k/nm-apollo68b.h b/gdb/config/m68k/nm-apollo68b.h new file mode 100644 index 0000000..4048a8b --- /dev/null +++ b/gdb/config/m68k/nm-apollo68b.h @@ -0,0 +1,41 @@ +/* Macro defintions for an Apollo m68k in BSD mode + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define FETCH_INFERIOR_REGISTERS + +/* Tell gdb that we can attach and detach other processes */ +#define ATTACH_DETACH + +#define U_REGS_OFFSET 6 + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR 0 + +#undef FLOAT_INFO /* No float info yet */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = (6 + 4 * (regno)) + +/* Apollos don't really have a USER area,so trying to read it from the + * process address space will fail. It does support a read from a faked + * USER area using the "PEEKUSER" ptrace call. + */ +#define PT_READ_U 3 diff --git a/gdb/config/m68k/nm-apollo68v.h b/gdb/config/m68k/nm-apollo68v.h new file mode 100644 index 0000000..3a56f4a --- /dev/null +++ b/gdb/config/m68k/nm-apollo68v.h @@ -0,0 +1,20 @@ +/* Macro defintions for an Apollo. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define FETCH_INFERIOR_REGISTERS diff --git a/gdb/config/m68k/nm-delta68.h b/gdb/config/m68k/nm-delta68.h new file mode 100644 index 0000000..cb7ffbf --- /dev/null +++ b/gdb/config/m68k/nm-delta68.h @@ -0,0 +1,21 @@ +/* Macro definitions for a Motorola Delta Series sysV68 R3V7.1. + Copyright (C) 1993, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + + +#define KERNEL_U_SIZE kernel_u_size() diff --git a/gdb/config/m68k/nm-dpx2.h b/gdb/config/m68k/nm-dpx2.h new file mode 100644 index 0000000..50da268 --- /dev/null +++ b/gdb/config/m68k/nm-dpx2.h @@ -0,0 +1,29 @@ +/* Native support for a Bull DPX2. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* KERNEL_U_ADDR is determined upon startup in dpx2-xdep.c. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = dpx2_register_u_addr ((blockend),(regno)); + +extern int +dpx2_register_u_addr PARAMS ((int, int)); + +/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */ +#define ONE_PROCESS_WRITETEXT diff --git a/gdb/config/m68k/nm-hp300bsd.h b/gdb/config/m68k/nm-hp300bsd.h new file mode 100644 index 0000000..7aacbb1 --- /dev/null +++ b/gdb/config/m68k/nm-hp300bsd.h @@ -0,0 +1,88 @@ +/* Parameters for Hewlett-Packard 9000/300 native support under bsd. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Detect whether this is 4.3 or 4.4. */ + +#include <errno.h> +#include <sys/param.h> +#ifdef BSD4_4 + +/* BSD 4.4 alpha or better */ + +/* We can attach to processes using ptrace. */ + +#define ATTACH_DETACH +#define PTRACE_ATTACH 10 +#define PTRACE_DETACH 11 + +/* The third argument of ptrace is declared as this type. */ + +#define PTRACE_ARG3_TYPE caddr_t + +/* U_REGS_OFFSET is the offset of the registers within the u area for + ptrace purposes. */ +#define U_REGS_OFFSET \ + ptrace (PT_READ_U, inferior_pid, \ + (PTRACE_ARG3_TYPE) \ + (offsetof (struct user, u_kproc.kp_proc.p_md.md_regs)), 0) \ + - USRSTACK + +/* No user structure in 4.4, registers are relative to kernel stack + which is fixed. */ +#define KERNEL_U_ADDR 0xFFF00000 + +/* FIXME: Is ONE_PROCESS_WRITETEXT still true now that the kernel has + copy-on-write? It not, move it to the 4.3-specific section below + (now it is in xm-hp300bsd.h). */ + +#else + +/* This is BSD 4.3 or something like it. */ + +/* Get kernel u area address at run-time using BSD style nlist (). */ +#define KERNEL_U_ADDR_BSD + +#endif + +/* This was once broken for 4.4, but probably because we had the wrong + KERNEL_U_ADDR. */ + +/* This is a piece of magic that is given a register number REGNO + and as BLOCKEND the address in the system of the end of the user structure + and stores in ADDR the address in the kernel or core dump + of that register. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ \ + if (regno < PS_REGNUM) \ + addr = (int) &((struct frame *)(blockend))->f_regs[regno]; \ + else if (regno == PS_REGNUM) \ + addr = (int) &((struct frame *)(blockend))->f_stackadj; \ + else if (regno == PC_REGNUM) \ + addr = (int) &((struct frame *)(blockend))->f_pc; \ + else if (regno < FPC_REGNUM) \ + addr = (int) \ + &((struct user *)0)->u_pcb.pcb_fpregs.fpf_regs[((regno)-FP0_REGNUM)*3];\ + else if (regno == FPC_REGNUM) \ + addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpcr; \ + else if (regno == FPS_REGNUM) \ + addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpsr; \ + else \ + addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpiar; \ +} diff --git a/gdb/config/m68k/nm-hp300hpux.h b/gdb/config/m68k/nm-hp300hpux.h new file mode 100644 index 0000000..83e7b2b --- /dev/null +++ b/gdb/config/m68k/nm-hp300hpux.h @@ -0,0 +1,53 @@ +/* Parameters for native support on HP 9000 model 320, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +/* fetch_inferior_registers is in nat-hp300hpux.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* Get registers from a core file. The floating point stuff is just + guesses. */ +#define NEED_SYS_CORE_H +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ \ + if (regno < PS_REGNUM) \ + addr = (int) (&((struct proc_regs *)(blockend))->d0 + regno); \ + else if (regno == PS_REGNUM) \ + addr = (int) ((char *) (&((struct proc_regs *)(blockend))->ps) - 2); \ + else if (regno == PC_REGNUM) \ + addr = (int) &((struct proc_regs *)(blockend))->pc; \ + else if (regno < FPC_REGNUM) \ + addr = (int) (((struct proc_regs *)(blockend))->mc68881 \ + + ((regno) - FP0_REGNUM) / 2); \ + else \ + addr = (int) (((struct proc_regs *)(blockend))->p_float \ + + (regno) - FPC_REGNUM); \ +} + +/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace + with five arguments, so programs written for normal ptrace lose. + + Idiots. + + (They should have just made it varadic). */ + +#define FIVE_ARG_PTRACE diff --git a/gdb/config/m68k/nm-linux.h b/gdb/config/m68k/nm-linux.h new file mode 100644 index 0000000..d7a44ec --- /dev/null +++ b/gdb/config/m68k/nm-linux.h @@ -0,0 +1,47 @@ +/* Native support for linux, for GDB, the GNU debugger. + Copyright (C) 1996,1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_LINUX_H +#define NM_LINUX_H + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); + +/* Tell gdb that we can attach and detach other processes */ +#define ATTACH_DETACH + +#define U_REGS_OFFSET 0 + +/* We define this if link.h is available, because with ELF we use SVR4 style + shared libraries. */ + +#ifdef HAVE_LINK_H +#define SVR4_SHARED_LIBS +#include "solib.h" /* Support for shared libraries. */ +#endif + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = m68k_linux_register_u_addr ((blockend),(regno)); + +extern int +m68k_linux_register_u_addr PARAMS ((int, int)); + +#endif /* #ifndef NM_LINUX_H */ diff --git a/gdb/config/m68k/nm-m68klynx.h b/gdb/config/m68k/nm-m68klynx.h new file mode 100644 index 0000000..62b8d24 --- /dev/null +++ b/gdb/config/m68k/nm-m68klynx.h @@ -0,0 +1,25 @@ +/* Native-dependent definitions for Motorola 680x0 running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_M68KLYNX_H +#define NM_M68KLYNX_H + +#include "nm-lynx.h" + +#endif /* NM_M68KLYNX_H */ diff --git a/gdb/config/m68k/nm-nbsd.h b/gdb/config/m68k/nm-nbsd.h new file mode 100644 index 0000000..ce22c4d --- /dev/null +++ b/gdb/config/m68k/nm-nbsd.h @@ -0,0 +1,21 @@ +/* Native-dependent definitions for Motorola m68k running NetBSD, for GDB. + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic NetBSD native definitions. */ +#include "nm-nbsd.h" diff --git a/gdb/config/m68k/nm-news.h b/gdb/config/m68k/nm-news.h new file mode 100644 index 0000000..643d217 --- /dev/null +++ b/gdb/config/m68k/nm-news.h @@ -0,0 +1,26 @@ +/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger. + Copyright 1987, 1989, 1992, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_HEWS_H +#define NM_NEWS_H 1 + +/* Supply missing typedef needed in inftarg.c */ +typedef int pid_t; + +#endif /* NM_NEWS_H */ diff --git a/gdb/config/m68k/nm-sun2.h b/gdb/config/m68k/nm-sun2.h new file mode 100644 index 0000000..9035250 --- /dev/null +++ b/gdb/config/m68k/nm-sun2.h @@ -0,0 +1,33 @@ +/* Parameters for execution on a Sun2, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* This is a piece of magic that is given a register number REGNO + and as BLOCKEND the address in the system of the end of the user structure + and stores in ADDR the address in the kernel or core dump + of that register. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = blockend + regno * 4; } diff --git a/gdb/config/m68k/nm-sun3.h b/gdb/config/m68k/nm-sun3.h new file mode 100644 index 0000000..e4ef8f4 --- /dev/null +++ b/gdb/config/m68k/nm-sun3.h @@ -0,0 +1,31 @@ +/* Native-only definitions for Sun-3 for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1991, 1992, 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* We have to grab the regs since we store all regs at once. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) diff --git a/gdb/config/m68k/nm-sysv4.h b/gdb/config/m68k/nm-sysv4.h new file mode 100644 index 0000000..6773131 --- /dev/null +++ b/gdb/config/m68k/nm-sysv4.h @@ -0,0 +1,22 @@ +/* Native-dependent definitions for Motorola 680x0 running SVR4. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include the generic SVR4 definitions. */ + +#include "nm-sysv4.h" diff --git a/gdb/config/m68k/os68k.mt b/gdb/config/m68k/os68k.mt new file mode 100644 index 0000000..391dd89 --- /dev/null +++ b/gdb/config/m68k/os68k.mt @@ -0,0 +1,3 @@ +# Target: VxWorks running on a 68000 +TDEPFILES= m68k-tdep.o +TM_FILE= tm-os68k.h diff --git a/gdb/config/m68k/st2000.mt b/gdb/config/m68k/st2000.mt new file mode 100644 index 0000000..06dfe5c --- /dev/null +++ b/gdb/config/m68k/st2000.mt @@ -0,0 +1,3 @@ +# Target: Tandem ST-2000 phone switch +TDEPFILES= m68k-tdep.o remote-st.o +TM_FILE= tm-st2000.h diff --git a/gdb/config/m68k/sun2os3.mh b/gdb/config/m68k/sun2os3.mh new file mode 100644 index 0000000..a3ef627 --- /dev/null +++ b/gdb/config/m68k/sun2os3.mh @@ -0,0 +1,5 @@ +# Host: Sun 2, running SunOS 3 +XDEPFILES= +XM_FILE= xm-sun2.h +NAT_FILE= nm-sun2.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o sun3-nat.o diff --git a/gdb/config/m68k/sun2os3.mt b/gdb/config/m68k/sun2os3.mt new file mode 100644 index 0000000..12b7c7f --- /dev/null +++ b/gdb/config/m68k/sun2os3.mt @@ -0,0 +1,7 @@ +# Target: Sun 2, running SunOS 3 +# The system-supplied assembler re-orders the symbols so that gdb +# can't find "gcc_compiled.". +#msg If you compile your program with GCC, use the GNU assembler. +#msg +TDEPFILES= m68k-tdep.o +TM_FILE= tm-sun2.h diff --git a/gdb/config/m68k/sun2os4.mh b/gdb/config/m68k/sun2os4.mh new file mode 100644 index 0000000..617642d --- /dev/null +++ b/gdb/config/m68k/sun2os4.mh @@ -0,0 +1,5 @@ +# Host: Sun 2, running SunOS 4 +XDEPFILES= +XM_FILE= xm-sun2.h +NAT_FILE= nm-sun2.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o sun3-nat.o diff --git a/gdb/config/m68k/sun2os4.mt b/gdb/config/m68k/sun2os4.mt new file mode 100644 index 0000000..d0c56fe --- /dev/null +++ b/gdb/config/m68k/sun2os4.mt @@ -0,0 +1,3 @@ +# Target: Sun 2, running SunOS 4 +TDEPFILES= solib.o m68k-tdep.o +TM_FILE= tm-sun2os4.h diff --git a/gdb/config/m68k/sun3os3.mh b/gdb/config/m68k/sun3os3.mh new file mode 100644 index 0000000..1b93793 --- /dev/null +++ b/gdb/config/m68k/sun3os3.mh @@ -0,0 +1,5 @@ +# Host: Sun 3, running SunOS 3 +XDEPFILES= +XM_FILE= xm-sun3.h +NAT_FILE= nm-sun3.h +NATDEPFILES= fork-child.o inftarg.o infptrace.o corelow.o sun3-nat.o diff --git a/gdb/config/m68k/sun3os3.mt b/gdb/config/m68k/sun3os3.mt new file mode 100644 index 0000000..8f9dac8 --- /dev/null +++ b/gdb/config/m68k/sun3os3.mt @@ -0,0 +1,8 @@ +# Target: Sun 3, running SunOS 3 +# The system-supplied assembler re-orders the symbols so that gdb +# can't find "gcc_compiled.". +#msg If you compile your program with GCC, use the GNU assembler. +#msg + +TDEPFILES= m68k-tdep.o +TM_FILE= tm-sun3.h diff --git a/gdb/config/m68k/sun3os4.mh b/gdb/config/m68k/sun3os4.mh new file mode 100644 index 0000000..5d1bf52 --- /dev/null +++ b/gdb/config/m68k/sun3os4.mh @@ -0,0 +1,6 @@ +# Host: Sun 3, running SunOS 4 +XDEPFILES= +XM_FILE= xm-sun3os4.h +NAT_FILE= nm-sun3.h +NATDEPFILES= fork-child.o inftarg.o infptrace.o corelow.o sun3-nat.o +GDBSERVER_DEPFILES= low-sun3.o diff --git a/gdb/config/m68k/sun3os4.mt b/gdb/config/m68k/sun3os4.mt new file mode 100644 index 0000000..dbc265f --- /dev/null +++ b/gdb/config/m68k/sun3os4.mt @@ -0,0 +1,3 @@ +# Target: Sun 3, running SunOS 4, as a target system +TDEPFILES= solib.o m68k-tdep.o +TM_FILE= tm-sun3os4.h diff --git a/gdb/config/m68k/tm-3b1.h b/gdb/config/m68k/tm-3b1.h new file mode 100644 index 0000000..f917760 --- /dev/null +++ b/gdb/config/m68k/tm-3b1.h @@ -0,0 +1,32 @@ +/* Parameters for targeting GDB to a 3b1. + Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The child target can't deal with floating registers. */ +#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM) + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0x1 + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0x300000 + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-altos.h b/gdb/config/m68k/tm-altos.h new file mode 100644 index 0000000..2d77fea --- /dev/null +++ b/gdb/config/m68k/tm-altos.h @@ -0,0 +1,57 @@ +/* Target definitions for GDB on an Altos 3068 (m68k running SVR2) + Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The child target can't deal with floating registers. */ +#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM) + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0xe + +/* Address of end of stack space. */ + +/*#define STACK_END_ADDR (0xffffff)*/ +#define STACK_END_ADDR (0x1000000) + +/* Amount PC must be decremented by after a breakpoint. + On the Altos, the kernel resets the pc to the trap instr */ + +#define DECR_PC_AFTER_BREAK 0 + +/* The only reason this is here is the tm-altos.h reference below. It + was moved back here from tm-m68k.h. FIXME? */ + +#define SKIP_PROLOGUE(pc) \ +{ register int op = read_memory_integer (pc, 2); \ + if (op == 0047126) \ + pc += 4; /* Skip link #word */ \ + else if (op == 0044016) \ + pc += 6; /* Skip link #long */ \ + /* Not sure why branches are here. */ \ + /* From tm-isi.h, tm-altos.h */ \ + else if (op == 0060000) \ + pc += 4; /* Skip bra #word */ \ + else if (op == 00600377) \ + pc += 6; /* skip bra #long */ \ + else if ((op & 0177400) == 0060000) \ + pc += 2; /* skip bra #char */ \ +} + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-apollo68b.h b/gdb/config/m68k/tm-apollo68b.h new file mode 100644 index 0000000..ee10410 --- /dev/null +++ b/gdb/config/m68k/tm-apollo68b.h @@ -0,0 +1,59 @@ +/* Parameters for execution on Apollo 68k running BSD. + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Apollos use vector 0xb for the breakpoint vector */ + +#define BPT_VECTOR 0xb + +#include "m68k/tm-m68k.h" + +#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe) + +/* These are the jmp_buf registers I could guess. There are 13 registers + * in the buffer. There are 8 data registers, 6 general address registers, + * the Frame Pointer, the Stack Pointer, the PC and the SR in the chip. I would + * guess that 12 is the SR, but we don't need that anyway. 0 and 1 have + * me stumped. 4 appears to be a5 for some unknown reason. If you care + * about this, disassemble setjmp to find out. But don't do it with gdb :) + */ + +#undef JB_SP +#undef JB_FP +#undef JB_PC +#undef JB_D0 +#undef JB_D1 +#undef JB_D2 +#undef JB_D3 +#undef JB_D4 +#undef JB_D5 + +#define JB_SP 2 +#define JB_FP 3 +#define JB_PC 5 +#define JB_D0 6 +#define JB_D1 7 +#define JB_D2 8 +#define JB_D3 9 +#define JB_D4 10 +#define JB_D5 11 + +/* How to decide if we're in a shared library function. (Probably a wrong + definintion inherited from the VxWorks config file). */ +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) (name && strcmp(name, "<end_of_program>") == 0) diff --git a/gdb/config/m68k/tm-cisco.h b/gdb/config/m68k/tm-cisco.h new file mode 100644 index 0000000..c3628d0 --- /dev/null +++ b/gdb/config/m68k/tm-cisco.h @@ -0,0 +1,55 @@ +/* Parameters for CISCO m68k. + Copyright (C) 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".cisco-gdbinit" /* Init file */ + +#define DEFAULT_PROMPT "(cisco-68k-gdb) " /* Default prompt */ + +#include "m68k/tm-m68k.h" + +/* Offsets (in target ints) into jmp_buf. Defined in /csc/sys/sun/asm.S. */ + +#define JB_ELEMENT_SIZE 4 + +#define JB_PC 0 +#define JB_D2 1 +#define JB_D3 2 +#define JB_D4 3 +#define JB_D5 4 +#define JB_D6 5 +#define JB_D7 6 +#define JB_A2 7 +#define JB_A3 8 +#define JB_A4 9 +#define JB_A5 10 +#define JB_A6 11 +#define JB_SP 12 + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* BFD handles finding the registers in the core file, so they are at + the start of the BFD .reg section. */ +#define REGISTER_U_ADDR(addr,blockend,regno) (addr = REGISTER_BYTE (regno)) +#define KERNEL_U_ADDR 0 diff --git a/gdb/config/m68k/tm-delta68.h b/gdb/config/m68k/tm-delta68.h new file mode 100644 index 0000000..5965bb5 --- /dev/null +++ b/gdb/config/m68k/tm-delta68.h @@ -0,0 +1,103 @@ +/* Target definitions for delta68. + Copyright 1993, 1994, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0x1 + +#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled%" +#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled%" + +/* Amount PC must be decremented by after a breakpoint. + On the Delta, the kernel decrements it for us. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Not sure what happens if we try to store this register, but + phdm@info.ucl.ac.be says we need this define. */ + +#define CANNOT_STORE_REGISTER(regno) (regno == FPI_REGNUM) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +/* When it returns a float/double value, use fp0 in sysV68. */ +/* When it returns a pointer value, use a0 in sysV68. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE, \ + ®BUF[REGISTER_BYTE (FP0_REGNUM)], \ + VALBUF); \ + else \ + memcpy ((VALBUF), \ + (char *) ((REGBUF) + \ + (TYPE_CODE(TYPE) == TYPE_CODE_PTR ? 8 * 4 : \ + (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)))), \ + TYPE_LENGTH(TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +/* When it returns a float/double value, use fp0 in sysV68. */ +/* When it returns a pointer value, use a0 in sysV68. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + { \ + char raw_buf[REGISTER_RAW_SIZE (FP0_REGNUM)]; \ + REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buf); \ + write_register_bytes (REGISTER_BYTE (FP0_REGNUM), \ + raw_buf, REGISTER_RAW_SIZE (FP0_REGNUM)); \ + } \ + else \ + write_register_bytes ((TYPE_CODE(TYPE) == TYPE_CODE_PTR ? 8 * 4 : 0), \ + VALBUF, TYPE_LENGTH (TYPE)) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(val, fi) \ +{ register CORE_ADDR pc = FRAME_SAVED_PC (fi); \ + register int insn = 0177777 & read_memory_integer (pc, 2); \ + val = 0; \ + if (insn == 0047757 || insn == 0157374) /* lea W(sp),sp or addaw #W,sp */ \ + val = read_memory_integer (pc + 2, 2); \ + else if ((insn & 0170777) == 0050217 /* addql #N, sp */ \ + || (insn & 0170777) == 0050117) /* addqw */ \ + { val = (insn >> 9) & 7; if (val == 0) val = 8; } \ + else if (insn == 0157774) /* addal #WW, sp */ \ + val = read_memory_integer (pc + 2, 4); \ + val >>= 2; } + +/* On M68040 versions of sysV68 R3V7.1, ptrace(PT_WRITE_I) does not clear + the processor's instruction cache as it should. */ +#define CLEAR_INSN_CACHE() clear_insn_cache() + +#include "m68k/tm-m68k.h" + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#undef EXTRACT_STRUCT_VALUE_ADDRESS +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF)\ + (*(CORE_ADDR *)((char*)(REGBUF) + 8 * 4)) diff --git a/gdb/config/m68k/tm-dpx2.h b/gdb/config/m68k/tm-dpx2.h new file mode 100644 index 0000000..8b1bfda --- /dev/null +++ b/gdb/config/m68k/tm-dpx2.h @@ -0,0 +1,33 @@ +/* Parameters for targeting to a Bull DPX2. + Copyright (C) 1986, 1987, 1989, 1991, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0xe + +/* Need to get function ends by adding this to epilogue address from .bf + record, not using x_fsize field. */ +#define FUNCTION_EPILOGUE_SIZE 4 + +/* The child target can't deal with writing floating registers. */ +#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM) + +#include <sys/types.h> +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-es1800.h b/gdb/config/m68k/tm-es1800.h new file mode 100644 index 0000000..ce2af1d --- /dev/null +++ b/gdb/config/m68k/tm-es1800.h @@ -0,0 +1,59 @@ +/* Parameters for execution on ES-1800 emulator for 68000. + The code was originally written by Johan Holmberg TT/SJ Ericsson Telecom + AB and later modified by Johan Henriksson TT/SJ. It was adapted to GDB 4.0 + by Jan Norden TX/DK. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +GDB is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 1, or (at your option) +any later version. + +GDB is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".esgdbinit" + +#define DEFAULT_PROMPT "(esgdb) " + +#include "m68k/tm-m68k.h" + +/* Longjmp stuff borrowed from sun3 configuration. Don't know if correct. + FIXME. */ +/* Offsets (in target ints) into jmp_buf. Not defined by Sun, but at least + documented in a comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_PSL 4 +#define JB_D2 5 +#define JB_D3 6 +#define JB_D4 7 +#define JB_D5 8 +#define JB_D6 9 +#define JB_D7 10 +#define JB_A2 11 +#define JB_A3 12 +#define JB_A4 13 +#define JB_A5 14 +#define JB_A6 15 + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); diff --git a/gdb/config/m68k/tm-hp300bsd.h b/gdb/config/m68k/tm-hp300bsd.h new file mode 100644 index 0000000..cdd75dc --- /dev/null +++ b/gdb/config/m68k/tm-hp300bsd.h @@ -0,0 +1,62 @@ +/* Parameters for target machine Hewlett-Packard 9000/300, running bsd. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Configuration file for HP9000/300 series machine running BSD, + including Utah, Mt. Xinu or Berkeley variants. This is NOT for HP-UX. + Problems to hpbsd-bugs@cs.utah.edu. */ + +/* GCC is the only compiler used on this OS. So get this right even if + the code which detects gcc2_compiled. is still broken. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. + + For hp300bsd the normal breakpoint vector is 0x2 (for debugging via + ptrace); for remote kernel debugging the breakpoint vector is 0xf. */ + +#define BPT_VECTOR 0x2 +#define REMOTE_BPT_VECTOR 0xf + +#define TARGET_NBPG 4096 + +/* For 4.4 this would be 2, but it is OK for us to detect an area a + bit bigger than necessary. This way the same gdb binary can target + either 4.3 or 4.4. */ + +#define TARGET_UPAGES 3 + +/* On the HP300, sigtramp is in the u area. Gak! User struct is not + mapped to the same virtual address in user/kernel address space + (hence STACK_END_ADDR as opposed to KERNEL_U_ADDR). This tests + for the whole u area, since we don't necessarily have hp300bsd + include files around. */ + +/* For 4.4, it is actually right 20 bytes *before* STACK_END_ADDR, so + include that in the area we test for. */ + +#define SIGTRAMP_START(pc) (STACK_END_ADDR - 20) +#define SIGTRAMP_END(pc) (STACK_END_ADDR + TARGET_UPAGES * TARGET_NBPG) + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0xfff00000 + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-hp300hpux.h b/gdb/config/m68k/tm-hp300hpux.h new file mode 100644 index 0000000..fce0d99 --- /dev/null +++ b/gdb/config/m68k/tm-hp300hpux.h @@ -0,0 +1,31 @@ +/* Parameters for execution on an HP 9000 model 320, for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* GCC is the only compiler used for stabs on this OS. So get this + right even if the code which detects gcc2_compiled. is still + broken. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0x1 + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-isi.h b/gdb/config/m68k/tm-isi.h new file mode 100644 index 0000000..f994524 --- /dev/null +++ b/gdb/config/m68k/tm-isi.h @@ -0,0 +1,150 @@ +/* Definitions to target GDB on an ISI Optimum V (3.05) under 4.3bsd. + Copyright (C) 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This has not been tested on ISI's running BSD 4.2, but it will probably + work. */ + +/* Data segment starts at etext rounded up to DATAROUND in {N,Z}MAGIC files */ + +#define DATAROUND 0x20000 +#define N_DATADDR(hdr) (hdr.a_magic != OMAGIC ? \ + (hdr.a_text + DATAROUND) & ~(DATAROUND-1) : hdr.a_text) + +/* Text segment starts at sizeof (struct exec) in {N,Z}MAGIC files */ + +#define N_TXTADDR(hdr) (hdr.a_magic != OMAGIC ? sizeof (struct exec) : 0) + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. + On the ISI, the kernel resets the pc to the trap instr */ + +#define DECR_PC_AFTER_BREAK 0 + + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(val, fi) \ +{ register CORE_ADDR pc = FRAME_SAVED_PC (fi); \ + register int insn = 0177777 & read_memory_integer (pc, 2); \ + val = 0; \ + if (insn == 0047757 || insn == 0157374) /* lea W(sp),sp or addaw #W,sp */ \ + val = read_memory_integer (pc + 2, 2); \ + else if ((insn & 0170777) == 0050217 /* addql #N, sp */ \ + || (insn & 0170777) == 0050117) /* addqw */ \ + { val = (insn >> 9) & 7; if (val == 0) val = 8; } \ + else if (insn == 0157774) /* addal #WW, sp */ \ + val = read_memory_integer (pc + 2, 4); \ + val >>= 2; } + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ register int regnum; \ + register int regmask; \ + register CORE_ADDR next_addr; \ + register CORE_ADDR pc; \ + register int insn; \ + register int offset; \ + memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ + if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \ + && (frame_info)->pc <= (frame_info)->frame) \ + { next_addr = (frame_info)->frame; \ + pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\ + else \ + { pc = get_pc_function_start ((frame_info)->pc); \ + /* Verify we have a link a6 instruction next, \ + or a branch followed by a link a6 instruction; \ + if not we lose. If we win, find the address above the saved \ + regs using the amount of storage from the link instruction. */\ +retry: \ + insn = read_memory_integer (pc, 2); \ + if (insn == 044016) \ + next_addr = (frame_info)->frame - read_memory_integer (pc += 2, 4), pc+=4; \ + else if (insn == 047126) \ + next_addr = (frame_info)->frame - read_memory_integer (pc += 2, 2), pc+=2; \ + else if ((insn & 0177400) == 060000) /* bra insn */ \ + { offset = insn & 0377; \ + pc += 2; /* advance past bra */ \ + if (offset == 0) /* bra #word */ \ + offset = read_memory_integer (pc, 2), pc += 2; \ + else if (offset == 0377) /* bra #long */ \ + offset = read_memory_integer (pc, 4), pc += 4; \ + pc += offset; \ + goto retry; \ + } else goto lose; \ + /* If have an addal #-n, sp next, adjust next_addr. */ \ + if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \ + next_addr += read_memory_integer (pc += 2, 4), pc += 4; \ + } \ + /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \ + insn = read_memory_integer (pc, 2), pc += 2; \ + regmask = read_memory_integer (pc, 2); \ + if ((insn & 0177760) == 022700) /* movl rn, (sp) */ \ + (frame_saved_regs).regs[(insn&7) + ((insn&010)?8:0)] = next_addr; \ + else if ((insn & 0177760) == 024700) /* movl rn, -(sp) */ \ + (frame_saved_regs).regs[(insn&7) + ((insn&010)?8:0)] = next_addr-=4; \ + else if (insn == 0044327) /* moveml mask, (sp) */ \ + { pc += 2; \ + /* Regmask's low bit is for register 0, the first written */ \ + next_addr -= 4; \ + for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \ + if (regmask & 1) \ + (frame_saved_regs).regs[regnum] = (next_addr += 4); \ + } else if (insn == 0044347) /* moveml mask, -(sp) */ \ + { pc += 2; \ + /* Regmask's low bit is for register 15, the first pushed */ \ + for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \ + if (regmask & 1) \ + (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \ + /* clrw -(sp); movw ccr,-(sp) may follow. */ \ + if (read_memory_integer (pc, 2) == 041147 \ + && read_memory_integer (pc+2, 2) == 042347) \ + (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \ + lose: ; \ + (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \ + (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \ +} + +/* The only reason this is here is the tm-isi.h reference below. It + was moved back here from tm-m68k.h. FIXME? */ + +#define SKIP_PROLOGUE(pc) \ +{ register int op = read_memory_integer (pc, 2); \ + if (op == 0047126) \ + pc += 4; /* Skip link #word */ \ + else if (op == 0044016) \ + pc += 6; /* Skip link #long */ \ + /* Not sure why branches are here. */ \ + /* From tm-isi.h, tm-altos.h */ \ + else if (op == 0060000) \ + pc += 4; /* Skip bra #word */ \ + else if (op == 00600377) \ + pc += 6; /* skip bra #long */ \ + else if ((op & 0177400) == 0060000) \ + pc += 2; /* skip bra #char */ \ +} + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-linux.h b/gdb/config/m68k/tm-linux.h new file mode 100644 index 0000000..6c11998 --- /dev/null +++ b/gdb/config/m68k/tm-linux.h @@ -0,0 +1,109 @@ +/* Definitions to target GDB to Linux on m680x0 + Copyright (C) 1996,1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Number of traps that happen between exec'ing the shell to run an + inferior, and when we finally get to the inferior code. This is 2 + on most implementations. */ + +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* The following definitions are appropriate when using the ELF + format, where floating point values are returned in fp0, pointer + values in a0 and other values in d0. */ + +/* Extract from an array REGBUF containing the (raw) register state a + function return value of type TYPE, and copy that, in virtual + format, into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ +{ \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + { \ + REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE, \ + ((char *) (REGBUF) \ + + REGISTER_BYTE (FP0_REGNUM)), \ + VALBUF); \ + } \ + else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \ + memcpy (VALBUF, (char *) (REGBUF) + REGISTER_BYTE (A0_REGNUM), \ + TYPE_LENGTH (TYPE)); \ + else \ + memcpy (VALBUF, \ + ((char *) (REGBUF) \ + + (TYPE_LENGTH (TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH (TYPE))), \ + TYPE_LENGTH (TYPE)); \ +} + +/* Write into appropriate registers a function return value of type + TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ +{ \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + { \ + char raw_buffer[REGISTER_RAW_SIZE (FP0_REGNUM)]; \ + REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buffer); \ + write_register_bytes (REGISTER_BYTE (FP0_REGNUM), \ + raw_buffer, TYPE_LENGTH (TYPE)); \ + } \ + else \ + { \ + if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \ + write_register_bytes (REGISTER_BYTE (A0_REGNUM), VALBUF, \ + TYPE_LENGTH (TYPE)); \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)); \ + } \ +} + +#include "tm-sysv4.h" +#include "m68k/tm-m68k.h" + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#undef EXTRACT_STRUCT_VALUE_ADDRESS +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (*(CORE_ADDR *)((char *) (REGBUF) + REGISTER_BYTE (A0_REGNUM))) + +/* Offsets (in target ints) into jmp_buf. */ + +#define JB_ELEMENT_SIZE 4 +#define JB_PC 7 + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +/* Offset to saved PC in sigcontext, from <asm/sigcontext.h>. */ +#define SIGCONTEXT_PC_OFFSET 26 + +#undef FRAME_SAVED_PC +#define FRAME_SAVED_PC(FRAME) \ + (((FRAME)->signal_handler_caller \ + ? sigtramp_saved_pc (FRAME) \ + : read_memory_integer ((FRAME)->frame + 4, 4))) + +extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *)); + +#define IN_SIGTRAMP(pc,name) in_sigtramp (pc) +extern int in_sigtramp PARAMS ((CORE_ADDR pc)); diff --git a/gdb/config/m68k/tm-m68k.h b/gdb/config/m68k/tm-m68k.h new file mode 100644 index 0000000..098500c --- /dev/null +++ b/gdb/config/m68k/tm-m68k.h @@ -0,0 +1,393 @@ +/* Parameters for execution on a 68000 series machine. + Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Generic 68000 stuff, to be included by other tm-*.h files. */ + +#define IEEE_FLOAT 1 + +/* Define the bit, byte, and word ordering of the machine. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#if !defined(SKIP_PROLOGUE) +#define SKIP_PROLOGUE(ip) {(ip) = m68k_skip_prologue(ip);} +extern CORE_ADDR m68k_skip_prologue PARAMS ((CORE_ADDR ip)); +#endif + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +#endif + +extern CORE_ADDR m68k_saved_pc_after_call PARAMS ((struct frame_info *)); +extern void m68k_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *)); + +#define SAVED_PC_AFTER_CALL(frame) \ + m68k_saved_pc_after_call(frame) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Stack must be kept short aligned when doing function calls. */ + +#define STACK_ALIGN(ADDR) (((ADDR) + 1) & ~1) + +/* Sequence of bytes for breakpoint instruction. + This is a TRAP instruction. The last 4 bits (0xf below) is the + vector. Systems which don't use 0xf should define BPT_VECTOR + themselves before including this file. */ + +#if !defined (BPT_VECTOR) +#define BPT_VECTOR 0xf +#endif + +#if !defined (BREAKPOINT) +#define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)} +#endif + +/* We default to vector 1 for the "remote" target, but allow targets + to override. */ +#if !defined (REMOTE_BPT_VECTOR) +#define REMOTE_BPT_VECTOR 1 +#endif + +#if !defined (REMOTE_BREAKPOINT) +#define REMOTE_BREAKPOINT {0x4e, (0x40 | REMOTE_BPT_VECTOR)} +#endif + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ + +#if !defined (DECR_PC_AFTER_BREAK) +#define DECR_PC_AFTER_BREAK 2 +#endif + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +#define REGISTER_BYTES_FP (16*4 + 8 + 8*12 + 3*4) +#define REGISTER_BYTES_NOFP (16*4 + 8) + +#ifndef NUM_REGS +#define NUM_REGS 29 +#endif + +#define NUM_FREGS (NUM_REGS-24) + +#ifndef REGISTER_BYTES_OK +#define REGISTER_BYTES_OK(b) \ + ((b) == REGISTER_BYTES_FP \ + || (b) == REGISTER_BYTES_NOFP) +#endif + +#ifndef REGISTER_BYTES +#define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4) +#endif + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) \ + ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \ + : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \ + : (N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the 68000, all regs are 4 bytes + except the floating point regs which are 12 bytes. */ +/* Note that the unsigned cast here forces the result of the + subtraction to very high positive values if N < FP0_REGNUM */ + +#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4) + +/* Number of bytes of storage in the program's representation + for register N. On the 68000, all regs are 4 bytes + except the floating point regs which are 8-byte doubles. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 12 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8) + +#include "floatformat.h" + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +do \ + { \ + DOUBLEST dbl_tmp_val; \ + floatformat_to_doublest (&floatformat_m68881_ext, (FROM), &dbl_tmp_val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), dbl_tmp_val); \ + } while (0) + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +do \ + { \ + DOUBLEST dbl_tmp_val; \ + dbl_tmp_val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + floatformat_from_doublest (&floatformat_m68881_ext, &dbl_tmp_val, (TO)); \ + } while (0) + +/* Return the GDB type object for the "standard" data type of data + in register N. This should be int for D0-D7, double for FP0-FP7, + and void pointer for all others (A0-A7, PC, SR, FPCONTROL etc). + Note, for registers which contain addresses return pointer to void, + not pointer to char, because we don't want to attempt to print + the string after printing the address. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((unsigned) (N) >= FPC_REGNUM ? lookup_pointer_type (builtin_type_void) : \ + (unsigned) (N) >= FP0_REGNUM ? builtin_type_double : \ + (unsigned) (N) >= A0_REGNUM ? lookup_pointer_type (builtin_type_void) : \ + builtin_type_int) + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +#define REGISTER_NAMES \ + {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \ + "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \ + "ps", "pc", \ + "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \ + "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define D0_REGNUM 0 +#define A0_REGNUM 8 +#define A1_REGNUM 9 +#define FP_REGNUM 14 /* Contains address of executing stack frame */ +#define SP_REGNUM 15 /* Contains address of top of stack */ +#define PS_REGNUM 16 /* Contains processor status */ +#define PC_REGNUM 17 /* Contains program counter */ +#define FP0_REGNUM 18 /* Floating point register 0 */ +#define FPC_REGNUM 26 /* 68881 control register */ +#define FPS_REGNUM 27 /* 68881 status register */ +#define FPI_REGNUM 28 /* 68881 iaddr register */ + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (A1_REGNUM, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. This is assuming that floating point values are returned + as doubles in d0/d1. */ + +#if !defined (EXTRACT_RETURN_VALUE) +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy ((VALBUF), \ + (char *)(REGBUF) + \ + (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \ + TYPE_LENGTH(TYPE)) +#endif + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. Assumes floats are passed + in d0/d1. */ + +#if !defined (STORE_RETURN_VALUE) +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) +#endif + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address and produces the frame's + chain-pointer. + In the case of the 68000, the frame's nominal address + is the address of a 4-byte word containing the calling frame's address. */ + +/* If we are chaining from sigtramp, then manufacture a sigtramp frame + (which isn't really on the stack. I'm not sure this is right for anything + but BSD4.3 on an hp300. */ +#define FRAME_CHAIN(thisframe) \ + (thisframe->signal_handler_caller \ + ? thisframe->frame \ + : (!inside_entry_file ((thisframe)->pc) \ + ? read_memory_integer ((thisframe)->frame, 4) \ + : 0)) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + do { \ + if ((FI)->signal_handler_caller) \ + (FRAMELESS) = 0; \ + else \ + (FRAMELESS) = frameless_look_for_prologue(FI); \ + } while (0) + +/* This was determined by experimentation on hp300 BSD 4.3. Perhaps + it corresponds to some offset in /usr/include/sys/user.h or + something like that. Using some system include file would + have the advantage of probably being more robust in the face + of OS upgrades, but the disadvantage of being wrong for + cross-debugging. */ + +#define SIG_PC_FP_OFFSET 530 + +#define FRAME_SAVED_PC(FRAME) \ + (((FRAME)->signal_handler_caller \ + ? ((FRAME)->next \ + ? read_memory_integer ((FRAME)->next->frame + SIG_PC_FP_OFFSET, 4) \ + : read_memory_integer (read_register (SP_REGNUM) \ + + SIG_PC_FP_OFFSET - 8, 4) \ + ) \ + : read_memory_integer ((FRAME)->frame + 4, 4)) \ + ) + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ +#if !defined (FRAME_NUM_ARGS) +#define FRAME_NUM_ARGS(val,fi) (val = -1) +#endif + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#if !defined (FRAME_FIND_SAVED_REGS) +#define FRAME_FIND_SAVED_REGS(fi,fsr) m68k_find_saved_regs ((fi), &(fsr)) +#endif /* no FIND_FRAME_SAVED_REGS. */ + + +/* Things needed for making the inferior call functions. */ + +/* The CALL_DUMMY macro is the sequence of instructions, as disassembled + by gdb itself: + + These instructions exist only so that m68k_find_saved_regs can parse + them as a "prologue"; they are never executed. + + fmovemx fp0-fp7,sp@- 0xf227 0xe0ff + moveml d0-a5,sp@- 0x48e7 0xfffc + clrw sp@- 0x4267 + movew ccr,sp@- 0x42e7 + + The arguments are pushed at this point by GDB; no code is needed in + the dummy for this. The CALL_DUMMY_START_OFFSET gives the position + of the following jsr instruction. That is where we start + executing. + + jsr @#0x32323232 0x4eb9 0x3232 0x3232 + addal #0x69696969,sp 0xdffc 0x6969 0x6969 + trap #<your BPT_VECTOR number here> 0x4e4? + nop 0x4e71 + + Note this is CALL_DUMMY_LENGTH bytes (28 for the above example). + + The dummy frame always saves the floating-point registers, whether they + actually exist on this target or not. */ + +/* FIXME: Wrong to hardwire this as BPT_VECTOR when sometimes it + should be REMOTE_BPT_VECTOR. Best way to fix it would be to define + CALL_DUMMY_BREAKPOINT_OFFSET. */ + +#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))} +#define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */ +#define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/ +#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 12) + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. + We use the BFD routines to store a big-endian value of known size. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ bfd_putb32 (fun, (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \ + bfd_putb32 (nargs*4, (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 8); } + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME { m68k_push_dummy_frame (); } + +extern void m68k_push_dummy_frame PARAMS ((void)); + +extern void m68k_pop_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME { m68k_pop_frame (); } + +/* Offset from SP to first arg on stack at first instruction of a function */ + +#define SP_ARG0 (1 * 4) + +#define TARGET_M68K diff --git a/gdb/config/m68k/tm-m68klynx.h b/gdb/config/m68k/tm-m68klynx.h new file mode 100644 index 0000000..fbe5707 --- /dev/null +++ b/gdb/config/m68k/tm-m68klynx.h @@ -0,0 +1,38 @@ +/* Macro definitions for Motorola 680x0 running under LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_M68KLYNX_H +#define TM_M68KLYNX_H + +#include "tm-lynx.h" + +/* If PC-2 contains this instruction, then we know what we are in a system + call stub, and the return PC is is at SP+4, instead of SP. */ + +#define SYSCALL_TRAP 0x4e4a /* trap #10 */ +#define SYSCALL_TRAP_OFFSET 2 /* PC is after trap instruction */ + +/* Use the generic 68k definitions. */ + +#include "m68k/tm-m68k.h" + +/* Disable dumbshit alternate breakpoint mechanism needed by 68k stub. */ +#undef REMOTE_BREAKPOINT + +#endif /* TM_M68KLYNX_H */ diff --git a/gdb/config/m68k/tm-m68kv4.h b/gdb/config/m68k/tm-m68kv4.h new file mode 100644 index 0000000..6730607 --- /dev/null +++ b/gdb/config/m68k/tm-m68kv4.h @@ -0,0 +1,70 @@ +/* Target definitions for GDB on a Motorola 680x0 running SVR4. + (Commodore Amiga with amix or Atari TT with ASV) + Copyright (C) 1991, 1995 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygint) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0x1 + +/* How much to decrement the PC after a trap. Depends on kernel. */ + +#define DECR_PC_AFTER_BREAK 0 /* No decrement required */ + +/* Use the alternate method of determining valid frame chains. */ + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +#include "tm-sysv4.h" +#include "m68k/tm-m68k.h" + +/* Offsets (in target ints) into jmp_buf. Not defined in any system header + file, so we have to step through setjmp/longjmp with a debugger and figure + them out. As a double check, note that <setjmp> defines _JBLEN as 13, + which matches the number of elements we see saved by setjmp(). */ + +#define JB_ELEMENT_SIZE sizeof(int) /* jmp_buf[_JBLEN] is array of ints */ + +#define JB_D2 0 +#define JB_D3 1 +#define JB_D4 2 +#define JB_D5 3 +#define JB_D6 4 +#define JB_D7 5 +#define JB_A1 6 +#define JB_A2 7 +#define JB_A3 8 +#define JB_A4 9 +#define JB_A5 10 +#define JB_A6 11 +#define JB_A7 12 + +#define JB_PC JB_A1 /* Setjmp()'s return PC saved in A1 */ + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* Convert a DWARF register number to a gdb REGNUM. */ +#define DWARF_REG_TO_REGNUM(num) ((num) < 16 ? (num) : (num)+FP0_REGNUM-16) diff --git a/gdb/config/m68k/tm-mac.h b/gdb/config/m68k/tm-mac.h new file mode 100644 index 0000000..90b4fab --- /dev/null +++ b/gdb/config/m68k/tm-mac.h @@ -0,0 +1,20 @@ +/* Target-dependent definitions for Mac running MacOS. + Copyright (C) 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-monitor.h b/gdb/config/m68k/tm-monitor.h new file mode 100644 index 0000000..7a48d9c --- /dev/null +++ b/gdb/config/m68k/tm-monitor.h @@ -0,0 +1,44 @@ +/* Target machine definitions for a generic m68k monitor/emulator. + Copyright (C) 1986, 1987, 1989, 1993, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The definitions here are appropriate for several embedded m68k-based + targets, including IDP (rom68k), BCC (cpu32bug), and EST's emulator. */ + +/* GCC is probably the only compiler used on this configuration. So + get this right even if the code which detects gcc2_compiled. is + still broken. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* The target system handles breakpoints. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* No float registers. */ + +/*#define NUM_REGS 18*/ + +#include "m68k/tm-m68k.h" + +/* Need to do this for ELF targets, where we can't figure out the boundaries of + the entry file. This method stops the backtrace when we reach main. */ + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +/* FIXME, should do GET_LONGJMP_TARGET for newlib. */ diff --git a/gdb/config/m68k/tm-nbsd.h b/gdb/config/m68k/tm-nbsd.h new file mode 100644 index 0000000..cc86cc8 --- /dev/null +++ b/gdb/config/m68k/tm-nbsd.h @@ -0,0 +1,41 @@ +/* Macro definitions for i386 running under NetBSD. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_NBSD_H +#define TM_NBSD_H + +#include <sys/param.h> +#include <machine/vmparam.h> + +/* Define BPT_VECTOR if it is different than the default. + This is the vector number used by traps to indicate a breakpoint. */ + +#define BPT_VECTOR 0x2 + +/* Address of end of stack space. */ +#define STACK_END_ADDR USRSTACK + +/* For NetBSD, sigtramp is 32 bytes before STACK_END_ADDR. */ +#define SIGTRAMP_START(pc) (STACK_END_ADDR - 32) +#define SIGTRAMP_END(pc) (STACK_END_ADDR) + +#include "m68k/tm-m68k.h" +#include "tm-nbsd.h" + +#endif /* TM_NBSD_H */ diff --git a/gdb/config/m68k/tm-news.h b/gdb/config/m68k/tm-news.h new file mode 100644 index 0000000..9fca446 --- /dev/null +++ b/gdb/config/m68k/tm-news.h @@ -0,0 +1,75 @@ +/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger. + Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* See following cpu type determination macro to get the machine type. + +Here is an m-news.h file for gdb. It supports the 68881 registers. + by hikichi@srava.sra.junet + +* Ptrace for handling floating register has a bug(before NEWS OS version 2.2), +* After NEWS OS version 3.2, some of ptrace's bug is fixed. + But we cannot change the floating register(see adb(1) in OS 3.2) yet. */ + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +/* when it return the floating value, use the FP0 in NEWS. */ +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + { if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + { \ + REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE, \ + ®BUF[REGISTER_BYTE (FP0_REGNUM)], \ + VALBUF); \ + } \ + else \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)); } + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +/* when it return the floating value, use the FP0 in NEWS. */ +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + { \ + char raw_buf[REGISTER_RAW_SIZE (FP0_REGNUM)]; \ + REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buf); \ + write_register_bytes (REGISTER_BYTE (FP0_REGNUM), \ + raw_buf, REGISTER_RAW_SIZE (FP0_REGNUM)); \ + } \ + else \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)); } + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(val, fi) \ +{ register CORE_ADDR pc = FRAME_SAVED_PC (fi); \ + register int insn = 0177777 & read_memory_integer (pc, 2); \ + val = 0; \ + if (insn == 0047757 || insn == 0157374) /* lea W(sp),sp or addaw #W,sp */ \ + val = read_memory_integer (pc + 2, 2); \ + else if ((insn & 0170777) == 0050217 /* addql #N, sp */ \ + || (insn & 0170777) == 0050117) /* addqw */ \ + { val = (insn >> 9) & 7; if (val == 0) val = 8; } \ + else if (insn == 0157774) /* addal #WW, sp */ \ + val = read_memory_integer (pc + 2, 4); \ + val >>= 2; } + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-os68k.h b/gdb/config/m68k/tm-os68k.h new file mode 100644 index 0000000..a69573f --- /dev/null +++ b/gdb/config/m68k/tm-os68k.h @@ -0,0 +1,46 @@ +/* Parameters for execution on VxWorks m68k's, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".os68gdbinit" + +#define DEFAULT_PROMPT "(os68k) " + +#include "m68k/tm-m68k.h" + +/* We have more complex, useful breakpoints on the target. */ +#undef DECR_PC_AFTER_BREAK +#define DECR_PC_AFTER_BREAK 0 + +/* Takes the current frame-struct pointer and returns the chain-pointer + to get to the calling frame. + + If our current frame pointer is zero, we're at the top; else read out + the saved FP from memory pointed to by the current FP. */ + +#undef FRAME_CHAIN +#define FRAME_CHAIN(thisframe) ((thisframe)->frame? read_memory_integer ((thisframe)->frame, 4): 0) + +/* If the chain pointer is zero (either because the saved value fetched + by FRAME_CHAIN was zero, or because the current FP was zero so FRAME_CHAIN + never fetched anything), we are at the top of the stack. */ +/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */ + +#undef FRAME_CHAIN_VALID +#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe) diff --git a/gdb/config/m68k/tm-st2000.h b/gdb/config/m68k/tm-st2000.h new file mode 100644 index 0000000..8ddf0e9 --- /dev/null +++ b/gdb/config/m68k/tm-st2000.h @@ -0,0 +1,20 @@ +/* Parameters for a Tandem ST2000 phone switch. + Copyright (C) 1986, 1987, 1989, 199 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-sun2.h b/gdb/config/m68k/tm-sun2.h new file mode 100644 index 0000000..9970f1e --- /dev/null +++ b/gdb/config/m68k/tm-sun2.h @@ -0,0 +1,23 @@ +/* Parameters for execution on a Sun, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The child target can't deal with floating registers. */ +#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM) + +#include "m68k/tm-m68k.h" diff --git a/gdb/config/m68k/tm-sun2os4.h b/gdb/config/m68k/tm-sun2os4.h new file mode 100644 index 0000000..76c7f99 --- /dev/null +++ b/gdb/config/m68k/tm-sun2os4.h @@ -0,0 +1,20 @@ +/* Copyright (C) 1990, Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m68k/tm-sun2.h" +#include "tm-sunos.h" diff --git a/gdb/config/m68k/tm-sun3.h b/gdb/config/m68k/tm-sun3.h new file mode 100644 index 0000000..be45db4 --- /dev/null +++ b/gdb/config/m68k/tm-sun3.h @@ -0,0 +1,107 @@ +/* Parameters for execution on a Sun, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_SUN3_H +#define TM_SUN3_H + +/* Sun3 status includes fpflags, which shows whether the FPU has been used + by the process, and whether the FPU was done with an instruction or + was interrupted in the middle of a long instruction. See + <machine/reg.h>. */ +/* a&d, pc,sr, fp, fpstat, fpflags */ + +#define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4) + +#define NUM_REGS 31 + +#define REGISTER_BYTES_OK(b) \ + ((b) == REGISTER_BYTES \ + || (b) == REGISTER_BYTES_FP \ + || (b) == REGISTER_BYTES_NOFP) + +/* If PC contains this instruction, then we know what we are in a system + call stub, and the return PC is is at SP+4, instead of SP. */ + +#define SYSCALL_TRAP 0x4e40 /* trap #0 */ +#define SYSCALL_TRAP_OFFSET 0 /* PC points at trap instruction */ + +#include "m68k/tm-m68k.h" + +/* Disable alternate breakpoint mechanism needed by 68k stub. */ +#undef REMOTE_BREAKPOINT + +/* Offsets (in target ints) into jmp_buf. Not defined by Sun, but at least + documented in a comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_PSL 4 +#define JB_D2 5 +#define JB_D3 6 +#define JB_D4 7 +#define JB_D5 8 +#define JB_D6 9 +#define JB_D7 10 +#define JB_A2 11 +#define JB_A3 12 +#define JB_A4 13 +#define JB_A5 14 +#define JB_A6 15 + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* If sun3 pcc says that a parameter is a short, it's a short. */ +#define BELIEVE_PCC_PROMOTION_TYPE + +/* Can't define BELIEVE_PCC_PROMOTION for SunOS /bin/cc of SunOS 4.1.1. + Apparently Sun fixed this for the sparc but not the sun3. */ + +/* The code which tries to deal with this bug is never harmful on a sun3. */ +#define SUN_FIXED_LBRAC_BUG (0) + +/* On the sun3 the kernel pushes a sigcontext on the user stack and then + `calls' _sigtramp in user code. _sigtramp saves the floating point status + on the stack and calls the signal handler function. The stack does not + contain enough information to allow a normal backtrace, but sigcontext + contains the saved user pc/sp. FRAME_CHAIN and friends in tm-m68k.h and + m68k_find_saved_regs deal with this situation by manufacturing a fake frame + for _sigtramp. + SIG_PC_FP_OFFSET is the offset from the signal handler frame to the + saved pc in sigcontext. + SIG_SP_FP_OFFSET is the offset from the signal handler frame to the end + of sigcontext which is identical to the saved sp at SIG_PC_FP_OFFSET - 4. + + Please note that it is impossible to correctly backtrace from a breakpoint + in _sigtramp as _sigtramp modifies the stack pointer a few times. */ + +#undef SIG_PC_FP_OFFSET +#define SIG_PC_FP_OFFSET 324 +#define SIG_SP_FP_OFFSET 332 + +#endif /* TM_SUN3_H */ diff --git a/gdb/config/m68k/tm-sun3os4.h b/gdb/config/m68k/tm-sun3os4.h new file mode 100644 index 0000000..927587b --- /dev/null +++ b/gdb/config/m68k/tm-sun3os4.h @@ -0,0 +1,21 @@ +/* Target machine parameters for Sun-3 under SunOS 4.x, for GDB. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m68k/tm-sun3.h" +#include "tm-sunos.h" diff --git a/gdb/config/m68k/tm-vx68.h b/gdb/config/m68k/tm-vx68.h new file mode 100644 index 0000000..e601bda --- /dev/null +++ b/gdb/config/m68k/tm-vx68.h @@ -0,0 +1,91 @@ +/* Target machine description for VxWorks m68k's, for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".vxgdbinit" + +#define DEFAULT_PROMPT "(vxgdb) " + +/* GCC is probably the only compiler used on this configuration. So + get this right even if the code which detects gcc2_compiled. is + still broken. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* We have more complex, useful breakpoints on the target. */ +#define DECR_PC_AFTER_BREAK 0 + +#include "m68k/tm-m68k.h" + +/* Takes the current frame-struct pointer and returns the chain-pointer + to get to the calling frame. + + If our current frame pointer is zero, we're at the top; else read out + the saved FP from memory pointed to by the current FP. */ + +#undef FRAME_CHAIN +#define FRAME_CHAIN(thisframe) ((thisframe)->frame? read_memory_integer ((thisframe)->frame, 4): 0) + +/* If the chain pointer is zero (either because the saved value fetched + by FRAME_CHAIN was zero, or because the current FP was zero so FRAME_CHAIN + never fetched anything), we are at the top of the stack. */ +/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */ + +#undef FRAME_CHAIN_VALID +#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe) + +/* FIXME, Longjmp information stolen from Sun-3 config. Dunno if right. */ +/* Offsets (in target ints) into jmp_buf. Not defined by Sun, but at least + documented in a comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_PSL 4 +#define JB_D2 5 +#define JB_D3 6 +#define JB_D4 7 +#define JB_D5 8 +#define JB_D6 9 +#define JB_D7 10 +#define JB_A2 11 +#define JB_A3 12 +#define JB_A4 13 +#define JB_A5 14 +#define JB_A6 15 + +/* Figure out where the longjmp will land. Slurp the args out of the stack. + We expect the first arg to be a pointer to the jmp_buf structure from which + we extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* Number of registers in a ptrace_getregs call. */ + +#define VX_NUM_REGS (18) + +/* Number of registers in a ptrace_getfpregs call. */ + +#define VX_SIZE_FPREGS (8 * REGISTER_RAW_SIZE (FP0_REGNUM) \ + + (3 * REGISTER_SIZE)) diff --git a/gdb/config/m68k/vxworks68.mt b/gdb/config/m68k/vxworks68.mt new file mode 100644 index 0000000..8c97744 --- /dev/null +++ b/gdb/config/m68k/vxworks68.mt @@ -0,0 +1,3 @@ +# Target: Motorola m68k running VxWorks +TDEPFILES= m68k-tdep.o remote-vx.o remote-vx68.o xdr_ld.o xdr_ptrace.o xdr_rdb.o +TM_FILE= tm-vx68.h diff --git a/gdb/config/m68k/xm-3b1.h b/gdb/config/m68k/xm-3b1.h new file mode 100644 index 0000000..d1cc7f1 --- /dev/null +++ b/gdb/config/m68k/xm-3b1.h @@ -0,0 +1,85 @@ +/* Parameters for execution on a 3b1. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#define HAVE_TERMIO +#define USG + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR 0x70000 + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = blockend + regno * 4; } + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } + +#endif diff --git a/gdb/config/m68k/xm-altos.h b/gdb/config/m68k/xm-altos.h new file mode 100644 index 0000000..ca93bd1 --- /dev/null +++ b/gdb/config/m68k/xm-altos.h @@ -0,0 +1,202 @@ +/* Definitions to make GDB run on an Altos 3068 (m68k running SVR2) + Copyright (C) 1987,1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* The altos support would make a good base for a port to other USGR2 systems + (like the 3b1 and the Convergent miniframe). */ + +/* This is only needed in one file, but it's cleaner to put it here than + putting in more #ifdef's. */ +#include <sys/page.h> +#include <sys/net.h> + +#define USG + +#define HAVE_TERMIO + +#define CBREAK XTABS /* It takes all kinds... */ + +#ifndef R_OK +#define R_OK 4 +#define W_OK 2 +#define X_OK 1 +#define F_OK 0 +#endif + +/* Get sys/wait.h ie. from a Sun and edit it a little (mc68000 to m68k) */ +/* Why bother? */ +#if 0 +#define HAVE_WAIT_STRUCT +#endif + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR 0x1fbf000 + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ if (regno <= SP_REGNUM) \ + addr = blockend + regno * 4; \ + else if (regno == PS_REGNUM) \ + addr = blockend + regno * 4 + 4; \ + else if (regno == PC_REGNUM) \ + addr = blockend + regno * 4 + 2; \ +} + +#define REGISTER_ADDR(u_ar0, regno) \ + (((regno) < PS_REGNUM) \ + ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)]) \ + : (((regno) == PS_REGNUM) \ + ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS)) \ + : (&((struct exception_stack *) (u_ar0))->e_PC))) + +#define FP_REGISTER_ADDR(u, regno) \ + (((char *) \ + (((regno) < FPC_REGNUM) \ + ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \ + : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)]))) \ + - ((char *) (& u))) + + +#ifndef __GNUC__ +#undef USE_GAS +#define ALTOS_AS +#else +#define USE_GAS +#endif + +/* Motorola assembly format */ +#if !defined(USE_GAS) && !defined(ALTOS) +#define MOTOROLA +#endif + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#ifdef MOTOROLA +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("move.l $ end, sp"); \ + asm ("clr.l fp"); } +#else +#ifdef ALTOS_AS +#define INIT_STACK(beg, end) \ +{ asm ("global end"); \ + asm ("mov.l &end,%sp"); \ + asm ("clr.l %fp"); } +#else +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel $ end, sp"); \ + asm ("clrl fp"); } +#endif +#endif + +/* Push the frame pointer register on the stack. */ +#ifdef MOTOROLA +#define PUSH_FRAME_PTR \ + asm ("move.l fp, -(sp)"); +#else +#ifdef ALTOS_AS +#define PUSH_FRAME_PTR \ + asm ("mov.l %fp, -(%sp)"); +#else +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); +#endif +#endif + +/* Copy the top-of-stack to the frame pointer register. */ +#ifdef MOTOROLA +#define POP_FRAME_PTR \ + asm ("move.l (sp), fp"); +#else +#ifdef ALTOS_AS +#define POP_FRAME_PTR \ + asm ("mov.l (%sp), %fp"); +#else +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); +#endif +#endif + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#ifdef MOTOROLA +#define PUSH_REGISTERS \ +{ asm ("clr.w -(sp)"); \ + asm ("pea (10,sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } +#else +#ifdef ALTOS_AS +#define PUSH_REGISTERS \ +{ asm ("clr.w -(%sp)"); \ + asm ("pea (10,%sp)"); \ + asm ("movm.l &0xfffe,-(%sp)"); } +#else +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } +#endif +#endif + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#ifdef MOTOROLA +#define POP_REGISTERS \ +{ asm ("subi.l $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } +#else +#ifdef ALTOS_AS +#define POP_REGISTERS \ +{ asm ("sub.l &8,28(%sp)"); \ + asm ("movem (%sp),&0xffff"); \ + asm ("rte"); } +#else +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } +#endif +#endif diff --git a/gdb/config/m68k/xm-apollo68b.h b/gdb/config/m68k/xm-apollo68b.h new file mode 100644 index 0000000..f0defda --- /dev/null +++ b/gdb/config/m68k/xm-apollo68b.h @@ -0,0 +1,24 @@ +/* Macro definitions for an Apollo m68k in BSD mode + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#define ALIGN_STACK_ON_STARTUP + +extern char *strdup(); diff --git a/gdb/config/m68k/xm-apollo68v.h b/gdb/config/m68k/xm-apollo68v.h new file mode 100644 index 0000000..c87ff47 --- /dev/null +++ b/gdb/config/m68k/xm-apollo68v.h @@ -0,0 +1,44 @@ +/* Macro defintions for an Apollo. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu) + * July 1988 + */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* I'm running gdb 3.4 under 386/ix 2.0.2, which is a derivative of AT&T's +Sys V/386 3.2. + +On some machines, gdb crashes when it's starting up while calling the +vendor's termio tgetent() routine. It always works when run under +itself (actually, under 3.2, it's not an infinitely recursive bug.) +After some poking around, it appears that depending on the environment +size, or whether you're running YP, or the phase of the moon or something, +the stack is not always long-aligned when main() is called, and tgetent() +takes strong offense at that. On some machines this bug never appears, but +on those where it does, it occurs quite reliably. */ +#define ALIGN_STACK_ON_STARTUP + +/* define USG if you are using sys5 /usr/include's */ +#define USG + +#define HAVE_TERMIO + diff --git a/gdb/config/m68k/xm-delta68.h b/gdb/config/m68k/xm-delta68.h new file mode 100644 index 0000000..6ce705c --- /dev/null +++ b/gdb/config/m68k/xm-delta68.h @@ -0,0 +1,36 @@ +/* Macro definitions for a Delta. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* I'm running gdb 4.9 under sysV68 R3V7.1. + + On some machines, gdb crashes when it's starting up while calling the + vendor's termio tgetent() routine. It always works when run under + itself (actually, under 3.2, it's not an infinitely recursive bug.) + After some poking around, it appears that depending on the environment + size, or whether you're running YP, or the phase of the moon or something, + the stack is not always long-aligned when main() is called, and tgetent() + takes strong offense at that. On some machines this bug never appears, but + on those where it does, it occurs quite reliably. */ +#define ALIGN_STACK_ON_STARTUP + +#define USG + +#define HAVE_TERMIO diff --git a/gdb/config/m68k/xm-dpx2.h b/gdb/config/m68k/xm-dpx2.h new file mode 100644 index 0000000..e5532e7 --- /dev/null +++ b/gdb/config/m68k/xm-dpx2.h @@ -0,0 +1,26 @@ +/* Parameters for execution on a Bull DPX2. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#define HAVE_TERMIOS +#define USG + +/* Avoid redefinition errors */ +#include <limits.h> diff --git a/gdb/config/m68k/xm-hp300bsd.h b/gdb/config/m68k/xm-hp300bsd.h new file mode 100644 index 0000000..5e67792 --- /dev/null +++ b/gdb/config/m68k/xm-hp300bsd.h @@ -0,0 +1,85 @@ +/* Parameters for hosting on a Hewlett-Packard 9000/300, running bsd. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Configuration file for HP9000/300 series machine running + * University of Utah's 4.3bsd (or 4.4BSD) port. This is NOT for HP-UX. + * Problems to hpbsd-bugs@cs.utah.edu + */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include <sys/param.h> /* For INT_MIN */ + +/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */ +#define ONE_PROCESS_WRITETEXT + +extern char *strdup PARAMS ((const char *)); + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel #end, sp"); \ + asm ("movel #0,a6"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel a6,sp@-"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl sp@,a6"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea sp@(10)"); \ + asm ("movem #0xfffe,sp@-"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil #8,sp@(28)"); \ + asm ("movem sp@,#0xffff"); \ + asm ("rte"); } diff --git a/gdb/config/m68k/xm-hp300hpux.h b/gdb/config/m68k/xm-hp300hpux.h new file mode 100644 index 0000000..b6d75d6 --- /dev/null +++ b/gdb/config/m68k/xm-hp300hpux.h @@ -0,0 +1,150 @@ +/* Parameters for HP 9000 model 320 hosting, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Define this to indicate problems with traps after continuing. */ +#define HP_OS_BUG + +/* Set flag to indicate whether HP's assembler is in use. */ +#ifdef __GNUC__ +#ifdef __HPUX_ASM__ +#define HPUX_ASM +#endif +#else /* not GNU C. */ +#define HPUX_ASM +#endif /* not GNU C. */ + +/* Define this for versions of hp-ux older than 6.0 */ +/* #define HPUX_VERSION_5 */ + +/* define USG if you are using sys5 /usr/include's */ +#undef USG /* In case it was defined in the Makefile for cplus-dem.c */ +#define USG + +#define HAVE_TERMIOS + +#define REGISTER_ADDR(u_ar0, regno) \ + (unsigned int) \ + (((regno) < PS_REGNUM) \ + ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)]) \ + : (((regno) == PS_REGNUM) \ + ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS)) \ + : (&((struct exception_stack *) (u_ar0))->e_PC))) + +#define FP_REGISTER_ADDR(u, regno) \ + (((char *) \ + (((regno) < FPC_REGNUM) \ + ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \ + : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)]))) \ + - ((char *) (& u))) + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +#ifndef HPUX_ASM + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } + +#else /* HPUX_ASM */ + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm ("global end"); \ + asm ("mov.l &end,%sp"); \ + asm ("clr.l %a6"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("mov.l %fp,-(%sp)"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("mov.l (%sp),%fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clr.w -(%sp)"); \ + asm ("pea 10(%sp)"); \ + asm ("movm.l &0xfffe,-(%sp)"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subi.l &8,28(%sp)"); \ + asm ("mov.m (%sp),&0xffff"); \ + asm ("rte"); } + +#endif /* HPUX_ASM */ diff --git a/gdb/config/m68k/xm-isi.h b/gdb/config/m68k/xm-isi.h new file mode 100644 index 0000000..4e75333 --- /dev/null +++ b/gdb/config/m68k/xm-isi.h @@ -0,0 +1,92 @@ +/* Definitions to make GDB run on an ISI Optimum V (3.05) under 4.3bsd. + Copyright 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* This has not been tested on ISI's running BSD 4.2, but it will probably + work. */ + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +/*#define KERNEL_U_ADDR 0x10800000*/ +#define KERNEL_U_ADDR 0 + +/* expects blockend to be u.u_ar0 */ +extern int rloc[]; /* Defined in isi-dep.c */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ blockend &= UPAGES*NBPG - 1; \ + if (regno < 18) addr = (int)blockend + rloc[regno]*4; \ + else if (regno < 26) addr = (int) &((struct user *)0)->u_68881_regs \ + + (regno - 18) * 12; \ + else if (regno < 29) addr = (int) &((struct user *)0)->u_68881_regs \ + + 8 * 12 + (regno - 26) * 4; \ +} + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movl $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } diff --git a/gdb/config/m68k/xm-linux.h b/gdb/config/m68k/xm-linux.h new file mode 100644 index 0000000..7266cff --- /dev/null +++ b/gdb/config/m68k/xm-linux.h @@ -0,0 +1,40 @@ +/* Native support for linux, for GDB, the GNU debugger. + Copyright (C) 1996,1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef XM_LINUX_H +#define XM_LINUX_H + +/* Pick up most of what we need from the generic m68k host include file. */ + +#include "m68k/xm-m68k.h" + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ +#define KERNEL_U_ADDR 0x0 + +#define HAVE_TERMIOS +#define NEED_POSIX_SETPGID + +/* Linux has sigsetjmp and siglongjmp */ +#define HAVE_SIGSETJMP + +/* Need R_OK etc, but USG isn't defined. */ +#include <unistd.h> + +#endif /* #ifndef XM_LINUX_H */ diff --git a/gdb/config/m68k/xm-m68k.h b/gdb/config/m68k/xm-m68k.h new file mode 100644 index 0000000..5479408 --- /dev/null +++ b/gdb/config/m68k/xm-m68k.h @@ -0,0 +1,22 @@ +/* Macro definitions for running gdb on host machines with m68k cpu's. + Copyright (C) 1991, Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygint) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + diff --git a/gdb/config/m68k/xm-m68klynx.h b/gdb/config/m68k/xm-m68klynx.h new file mode 100644 index 0000000..ded6844 --- /dev/null +++ b/gdb/config/m68k/xm-m68klynx.h @@ -0,0 +1,24 @@ +/* Host-dependent definitions for Motorola 680x0 running LynxOS, for GDB. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Get generic LynxOS host definitions. */ + +#include "xm-lynx.h" diff --git a/gdb/config/m68k/xm-m68kv4.h b/gdb/config/m68k/xm-m68kv4.h new file mode 100644 index 0000000..2149c8f --- /dev/null +++ b/gdb/config/m68k/xm-m68kv4.h @@ -0,0 +1,28 @@ +/* Host definitions for GDB on a Motorola 680x0 running SVR4. + (Commodore Amiga with amix or Atari TT with ASV) + Copyright 1991, 1992 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Pick up most of what we need from the generic m68k host include file. */ + +#include "m68k/xm-m68k.h" + +/* Pick up more stuff from the generic SVR4 host include file. */ + +#include "xm-sysv4.h" diff --git a/gdb/config/m68k/xm-mpw.h b/gdb/config/m68k/xm-mpw.h new file mode 100644 index 0000000..f0585b3 --- /dev/null +++ b/gdb/config/m68k/xm-mpw.h @@ -0,0 +1,24 @@ +/* Macro definitions for running GDB on Apple 68k-based Macintoshes. + Copyright (C) 1994, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Use angle brackets so that the common xm-mpw.h is found. */ + +#include <xm-mpw.h> diff --git a/gdb/config/m68k/xm-nbsd.h b/gdb/config/m68k/xm-nbsd.h new file mode 100644 index 0000000..aa28e19 --- /dev/null +++ b/gdb/config/m68k/xm-nbsd.h @@ -0,0 +1,21 @@ +/* Parameters for execution on a Motorola m68k running NetBSD, for GDB. + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic NetBSD host definitions. */ +#include "xm-nbsd.h" diff --git a/gdb/config/m68k/xm-news.h b/gdb/config/m68k/xm-news.h new file mode 100644 index 0000000..081337b --- /dev/null +++ b/gdb/config/m68k/xm-news.h @@ -0,0 +1,137 @@ +/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger. + Copyright 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include <sys/param.h> /* For INT_MIN */ + +#define HAVE_WAIT_STRUCT + +/* We can't use "isatty" or "fileno" on this machine. This isn't good, + but it will have to do. */ +#define ISATTY(FP) ((FP) == stdin || (FP) == stdout) + +/* THis is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR UADDR + +/* The offsets in this macro are from /usr/include/machine/reg.h */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ static char offsets[] = { \ + /*d0-d7:*/1,2,3,4,5,6,7,8, \ + /*a0-a6:*/9,10,11,12,13,14,15, /*sp:*/-4, /*ps:*/0, /*pc:*/-1, \ + /*fp0-fp7:*/19,22,25,28,31,34,37,40, /*fpc:*/16,17,18 }; \ + addr = blockend + 4 * offsets[regno]; \ +} + +/* NewsOS 3.3 does not define errno in <errno.h>. */ +extern int errno; + +/* Interface definitions for kernel debugger KDB. */ + +/* Use GNU assembler instead of standard assembler */ +#define USE_GAS + +/* Motorola assembly format */ +#ifndef USE_GAS +#define MOTOROLA +#endif + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#ifdef MOTOROLA +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("move.l $ end, sp"); \ + asm ("clr.l fp"); } +#else +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel $ end, sp"); \ + asm ("clrl fp"); } +#endif + +/* Push the frame pointer register on the stack. */ +#ifdef MOTOROLA +#define PUSH_FRAME_PTR \ + asm ("move.l fp, -(sp)"); +#else +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); +#endif + +/* Copy the top-of-stack to the frame pointer register. */ +#ifdef MOTOROLA +#define POP_FRAME_PTR \ + asm ("move.l (sp), fp"); +#else +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); +#endif + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#ifdef MOTOROLA +#define PUSH_REGISTERS \ +{ asm ("clr.w -(sp)"); \ + asm ("pea (10,sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } +#else +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } +#endif + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#ifdef MOTOROLA +#define POP_REGISTERS \ +{ asm ("subi.l $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } +#else +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } +#endif diff --git a/gdb/config/m68k/xm-news1000.h b/gdb/config/m68k/xm-news1000.h new file mode 100644 index 0000000..b70234c --- /dev/null +++ b/gdb/config/m68k/xm-news1000.h @@ -0,0 +1,26 @@ +/* Parameters for a Sony/NEWS series 1000 with News-OS version 3, + for GDB, the GNU debugger. + Copyright (C) 1990 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is required by Sony include files like <sys/user.h> so we + get the right offset into the u area. Relying on the compiler + to define this only works for cc, not gcc. */ +#undef mc68030 +#define mc68030 +#include "m68k/xm-news.h" diff --git a/gdb/config/m68k/xm-sun2.h b/gdb/config/m68k/xm-sun2.h new file mode 100644 index 0000000..457451c --- /dev/null +++ b/gdb/config/m68k/xm-sun2.h @@ -0,0 +1,78 @@ +/* Parameters for execution on a Sun, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR 0x2800 + + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel fp, -(sp)"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea 10(sp)"); \ + asm ("movem $ 0xfffe,-(sp)"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil $8,28(sp)"); \ + asm ("movem (sp),$ 0xffff"); \ + asm ("rte"); } diff --git a/gdb/config/m68k/xm-sun3.h b/gdb/config/m68k/xm-sun3.h new file mode 100644 index 0000000..3de7446 --- /dev/null +++ b/gdb/config/m68k/xm-sun3.h @@ -0,0 +1,73 @@ +/* Parameters for execution on a Sun, for GDB, the GNU debugger. + Copyright (C) 1986, 1987, 1989, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ + 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + SIGILL } + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movel #end, sp"); \ + asm ("movel #0,a6"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("movel a6,sp@-"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl sp@,a6"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("clrw -(sp)"); \ + asm ("pea sp@(10)"); \ + asm ("movem #0xfffe,sp@-"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("subil #8,sp@(28)"); \ + asm ("movem sp@,#0xffff"); \ + asm ("rte"); } diff --git a/gdb/config/m68k/xm-sun3os4.h b/gdb/config/m68k/xm-sun3os4.h new file mode 100644 index 0000000..faf3b7d --- /dev/null +++ b/gdb/config/m68k/xm-sun3os4.h @@ -0,0 +1,21 @@ +/* Macro definitions for a sun 3 running os 4. + Copyright (C) 1989, Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m68k/xm-sun3.h" +#define FPU diff --git a/gdb/config/m88k/cxux.mh b/gdb/config/m88k/cxux.mh new file mode 100644 index 0000000..cb02225 --- /dev/null +++ b/gdb/config/m88k/cxux.mh @@ -0,0 +1,7 @@ +# Host: Motorola 88k running CX/UX + +XM_FILE= xm-cxux.h +XDEPFILES= + +NAT_FILE= nm-cxux.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o cxux-nat.o corelow.o core-aout.o diff --git a/gdb/config/m88k/cxux.mt b/gdb/config/m88k/cxux.mt new file mode 100644 index 0000000..295de84 --- /dev/null +++ b/gdb/config/m88k/cxux.mt @@ -0,0 +1,3 @@ +# Target: Motorola 88k running Harris CX/UX +TDEPFILES= m88k-tdep.o remote-bug.o +TM_FILE= tm-cxux.h diff --git a/gdb/config/m88k/delta88.mh b/gdb/config/m88k/delta88.mh new file mode 100644 index 0000000..824967a --- /dev/null +++ b/gdb/config/m88k/delta88.mh @@ -0,0 +1,7 @@ +# Host: Motorola 88k running SVR3 + +XM_FILE= xm-delta88.h +XDEPFILES= + +NAT_FILE= nm-m88k.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o m88k-nat.o corelow.o core-aout.o diff --git a/gdb/config/m88k/delta88.mt b/gdb/config/m88k/delta88.mt new file mode 100644 index 0000000..c8e669b --- /dev/null +++ b/gdb/config/m88k/delta88.mt @@ -0,0 +1,3 @@ +# Target: Motorola 88k running SVR3 +TDEPFILES= m88k-tdep.o +TM_FILE= tm-delta88.h diff --git a/gdb/config/m88k/delta88v4.mh b/gdb/config/m88k/delta88v4.mh new file mode 100644 index 0000000..82be883 --- /dev/null +++ b/gdb/config/m88k/delta88v4.mh @@ -0,0 +1,7 @@ +# Host: Motorola 88k running SVR4 + +XM_FILE= xm-delta88v4.h +XDEPFILES= + +NAT_FILE= nm-delta88v4.h +NATDEPFILES= fork-child.o m88k-nat.o corelow.o core-regset.o procfs.o solib.o diff --git a/gdb/config/m88k/delta88v4.mt b/gdb/config/m88k/delta88v4.mt new file mode 100644 index 0000000..7797d4b --- /dev/null +++ b/gdb/config/m88k/delta88v4.mt @@ -0,0 +1,3 @@ +# Target: Motorola 88k running SVR4 +TDEPFILES= m88k-tdep.o +TM_FILE= tm-delta88v4.h diff --git a/gdb/config/m88k/m88k.mh b/gdb/config/m88k/m88k.mh new file mode 100644 index 0000000..6933265 --- /dev/null +++ b/gdb/config/m88k/m88k.mh @@ -0,0 +1,5 @@ +# Host: Motorola 88000 running DGUX +XDEPFILES= +XM_FILE= xm-dgux.h +NAT_FILE= nm-m88k.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o m88k-nat.o diff --git a/gdb/config/m88k/m88k.mt b/gdb/config/m88k/m88k.mt new file mode 100644 index 0000000..ca3fab4 --- /dev/null +++ b/gdb/config/m88k/m88k.mt @@ -0,0 +1,3 @@ +# Target: Motorola 88k Binary Compatibility Standard +TDEPFILES= m88k-tdep.o remote-bug.o +TM_FILE= tm-m88k.h diff --git a/gdb/config/m88k/nm-cxux.h b/gdb/config/m88k/nm-cxux.h new file mode 100644 index 0000000..fec9536 --- /dev/null +++ b/gdb/config/m88k/nm-cxux.h @@ -0,0 +1,32 @@ +/* Native definitions for Motorola 88K running Harris CX/UX + Copyright 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Override the standard fetch/store definitions. */ + +#define FETCH_INFERIOR_REGISTERS + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = m88k_register_u_addr ((blockend),(regno)); + +#define ATTACH_DETACH + +#define PTRACE_ATTACH 128 +#define PTRACE_DETACH 129 + + diff --git a/gdb/config/m88k/nm-delta88v4.h b/gdb/config/m88k/nm-delta88v4.h new file mode 100644 index 0000000..9c1a30e --- /dev/null +++ b/gdb/config/m88k/nm-delta88v4.h @@ -0,0 +1,21 @@ +/* Native machine description for Motorola Delta 88 box, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/nm-m88k.h" +#include "nm-sysv4.h" diff --git a/gdb/config/m88k/nm-m88k.h b/gdb/config/m88k/nm-m88k.h new file mode 100644 index 0000000..95eca0a --- /dev/null +++ b/gdb/config/m88k/nm-m88k.h @@ -0,0 +1,24 @@ +/* Native support macros for m88k, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define FETCH_INFERIOR_REGISTERS + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = m88k_register_u_addr ((blockend),(regno)); diff --git a/gdb/config/m88k/tm-cxux.h b/gdb/config/m88k/tm-cxux.h new file mode 100644 index 0000000..e59c6da --- /dev/null +++ b/gdb/config/m88k/tm-cxux.h @@ -0,0 +1,59 @@ +/* Target definitions for m88k running Harris CX/UX. + Copyright 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HARRIS_TARGET 1 + +#define CXUX_TARGET 1 + +/* Type of X registers, as supplied by the OS */ + +typedef struct { + long w1, w2, w3, w4; +} X_REGISTER_RAW_TYPE; + +#define X_REGISTER_VIRTUAL_TYPE double + +#include "m88k/tm-m88k.h" + +#define ADD_SHARED_SYMBOL_FILES(args,have_tty) add_shared_symbol_files () + +#define CONVERT_REGISTER_ADDRESS + +/* Always allocate space for both, but recognize that the m88100 has no + FP_REGS. */ + +#undef ARCH_NUM_REGS +#define ARCH_NUM_REGS (target_is_m88110 ? (GP_REGS + FP_REGS) : (GP_REGS)) + +/* Don't need this grotesquerie. */ + +#undef SHIFT_INST_REGS + +/* Extended registers are treated as 16 bytes by Harris' OS's. + We treat them as 16 bytes here for consistency's sake. */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) ((N) < XFP_REGNUM ? 4 : 16) + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ + ((N) >= XFP_REGNUM \ + ? (((GP_REGS) * REGISTER_RAW_SIZE(0)) + \ + (((N) - XFP_REGNUM) * REGISTER_RAW_SIZE(XFP_REGNUM))) \ + : ((N) * REGISTER_RAW_SIZE(0))) diff --git a/gdb/config/m88k/tm-delta88.h b/gdb/config/m88k/tm-delta88.h new file mode 100644 index 0000000..c0a9c4a --- /dev/null +++ b/gdb/config/m88k/tm-delta88.h @@ -0,0 +1,26 @@ +/* Target machine description for Motorola Delta 88 box, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/tm-m88k.h" + +#define DELTA88 + +#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigcode", (name))) +#define SIGTRAMP_FRAME_FIXUP(frame) (frame) += 0x20 +#define SIGTRAMP_SP_FIXUP(sp) (sp) = read_memory_integer((sp), 4) diff --git a/gdb/config/m88k/tm-delta88v4.h b/gdb/config/m88k/tm-delta88v4.h new file mode 100644 index 0000000..112a4a6 --- /dev/null +++ b/gdb/config/m88k/tm-delta88v4.h @@ -0,0 +1,30 @@ +/* Target machine description for Motorola Delta 88 box, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define DELTA88 + +#include "m88k/tm-m88k.h" +#include "tm-sysv4.h" + +/* If we don't define this, backtraces go on forever. */ +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +#define IN_SIGTRAMP(pc, name) ((name) && (STREQ ("signalhandler", (name)) \ + || STREQ("sigacthandler", (name)))) +#define SIGTRAMP_SP_FIXUP(sp) (sp) = read_memory_integer((sp)+0xcd8, 4) diff --git a/gdb/config/m88k/tm-m88k.h b/gdb/config/m88k/tm-m88k.h new file mode 100644 index 0000000..390cdef --- /dev/null +++ b/gdb/config/m88k/tm-m88k.h @@ -0,0 +1,620 @@ +/* Target machine description for generic Motorola 88000, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* g++ support is not yet included. */ + +/* Define the bit, byte, and word ordering of the machine. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* We cache information about saved registers in the frame structure, + to save us from having to re-scan function prologues every time + a register in a non-current frame is accessed. */ + +#define EXTRA_FRAME_INFO \ + struct frame_saved_regs *fsr; \ + CORE_ADDR locals_pointer; \ + CORE_ADDR args_pointer; + +/* Zero the frame_saved_regs pointer when the frame is initialized, + so that FRAME_FIND_SAVED_REGS () will know to allocate and + initialize a frame_saved_regs struct the first time it is called. + Set the arg_pointer to -1, which is not valid; 0 and other values + indicate real, cached values. */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + init_extra_frame_info (fromleaf, fi) +extern void init_extra_frame_info (); + +#define IEEE_FLOAT + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(frompc) \ + { (frompc) = skip_prologue (frompc); } +extern CORE_ADDR skip_prologue (); + +/* The m88k kernel aligns all instructions on 4-byte boundaries. The + kernel also uses the least significant two bits for its own hocus + pocus. When gdb receives an address from the kernel, it needs to + preserve those right-most two bits, but gdb also needs to be careful + to realize that those two bits are not really a part of the address + of an instruction. Shrug. */ + +extern CORE_ADDR m88k_addr_bits_remove PARAMS ((CORE_ADDR)); +#define ADDR_BITS_REMOVE(addr) m88k_addr_bits_remove (addr) + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + (ADDR_BITS_REMOVE (read_register (SRP_REGNUM))) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +/* instruction 0xF000D1FF is 'tb0 0,r0,511' + If Bit bit 0 of r0 is clear (always true), + initiate exception processing (trap). + */ +#define BREAKPOINT {0xF0, 0x00, 0xD1, 0xFF} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define GP_REGS (38) +#define FP_REGS (32) +#define NUM_REGS (GP_REGS + FP_REGS) + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {\ + "r0",\ + "r1",\ + "r2",\ + "r3",\ + "r4",\ + "r5",\ + "r6",\ + "r7",\ + "r8",\ + "r9",\ + "r10",\ + "r11",\ + "r12",\ + "r13",\ + "r14",\ + "r15",\ + "r16",\ + "r17",\ + "r18",\ + "r19",\ + "r20",\ + "r21",\ + "r22",\ + "r23",\ + "r24",\ + "r25",\ + "r26",\ + "r27",\ + "r28",\ + "r29",\ + "r30",\ + "r31",\ + "psr",\ + "fpsr",\ + "fpcr",\ + "sxip",\ + "snip",\ + "sfip",\ + "x0",\ + "x1",\ + "x2",\ + "x3",\ + "x4",\ + "x5",\ + "x6",\ + "x7",\ + "x8",\ + "x9",\ + "x10",\ + "x11",\ + "x12",\ + "x13",\ + "x14",\ + "x15",\ + "x16",\ + "x17",\ + "x18",\ + "x19",\ + "x20",\ + "x21",\ + "x22",\ + "x23",\ + "x24",\ + "x25",\ + "x26",\ + "x27",\ + "x28",\ + "x29",\ + "x30",\ + "x31",\ + "vbr",\ + "dmt0",\ + "dmd0",\ + "dma0",\ + "dmt1",\ + "dmd1",\ + "dma1",\ + "dmt2",\ + "dmd2",\ + "dma2",\ + "sr0",\ + "sr1",\ + "sr2",\ + "sr3",\ + "fpecr",\ + "fphs1",\ + "fpls1",\ + "fphs2",\ + "fpls2",\ + "fppt",\ + "fprh",\ + "fprl",\ + "fpit",\ + "fpsr",\ + "fpcr",\ + } + + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define R0_REGNUM 0 /* Contains the constant zero */ +#define SRP_REGNUM 1 /* Contains subroutine return pointer */ +#define RV_REGNUM 2 /* Contains simple return values */ +#define SRA_REGNUM 12 /* Contains address of struct return values */ +#define SP_REGNUM 31 /* Contains address of top of stack */ + +/* Instruction pointer notes... + + On the m88100: + + * cr04 = sxip. On exception, contains the excepting pc (probably). + On rte, is ignored. + + * cr05 = snip. On exception, contains the NPC (next pc). On rte, + pc is loaded from here. + + * cr06 = sfip. On exception, contains the NNPC (next next pc). On + rte, the NPC is loaded from here. + + * lower two bits of each are flag bits. Bit 1 is V means address + is valid. If address is not valid, bit 0 is ignored. Otherwise, + bit 0 is E and asks for an exception to be taken if this + instruction is executed. + + On the m88110: + + * cr04 = exip. On exception, contains the address of the excepting + pc (always). On rte, pc is loaded from here. Bit 0, aka the D + bit, is a flag saying that the offending instruction was in a + branch delay slot. If set, then cr05 contains the NPC. + + * cr05 = enip. On exception, if the instruction pointed to by cr04 + was in a delay slot as indicated by the bit 0 of cr04, aka the D + bit, the cr05 contains the NPC. Otherwise ignored. + + * cr06 is invalid */ + +/* Note that the Harris Unix kernels emulate the m88100's behavior on + the m88110. */ + +#define SXIP_REGNUM 35 /* On m88100, Contains Shadow Execute + Instruction Pointer. */ +#define SNIP_REGNUM 36 /* On m88100, Contains Shadow Next + Instruction Pointer. */ +#define SFIP_REGNUM 37 /* On m88100, Contains Shadow Fetched + Intruction pointer. */ + +#define EXIP_REGNUM 35 /* On m88110, Contains Exception + Executing Instruction Pointer. */ +#define ENIP_REGNUM 36 /* On m88110, Contains the Exception + Next Instruction Pointer. */ + +#define PC_REGNUM SXIP_REGNUM /* Program Counter */ +#define NPC_REGNUM SNIP_REGNUM /* Next Program Counter */ +#define NNPC_REGNUM SFIP_REGNUM /* Next Next Program Counter */ + +#define PSR_REGNUM 32 /* Processor Status Register */ +#define FPSR_REGNUM 33 /* Floating Point Status Register */ +#define FPCR_REGNUM 34 /* Floating Point Control Register */ +#define XFP_REGNUM 38 /* First Extended Float Register */ +#define X0_REGNUM XFP_REGNUM /* Which also contains the constant zero */ + +/* This is rather a confusing lie. Our m88k port using a stack pointer value + for the frame address. Hence, the frame address and the frame pointer are + only indirectly related. The value of this macro is the register number + fetched by the machine "independent" portions of gdb when they want to know + about a frame address. Thus, we lie here and claim that FP_REGNUM is + SP_REGNUM. */ +#define FP_REGNUM SP_REGNUM /* Reg fetched to locate frame when pgm stops */ +#define ACTUAL_FP_REGNUM 30 + +/* PSR status bit definitions. */ + +#define PSR_MODE 0x80000000 +#define PSR_BYTE_ORDER 0x40000000 +#define PSR_SERIAL_MODE 0x20000000 +#define PSR_CARRY 0x10000000 +#define PSR_SFU_DISABLE 0x000003f0 +#define PSR_SFU1_DISABLE 0x00000008 +#define PSR_MXM 0x00000004 +#define PSR_IND 0x00000002 +#define PSR_SFRZ 0x00000001 + + + +/* The following two comments come from the days prior to the m88110 + port. The m88110 handles the instruction pointers differently. I + do not know what any m88110 kernels do as the m88110 port I'm + working with is for an embedded system. rich@cygnus.com + 13-sept-93. */ + +/* BCS requires that the SXIP_REGNUM (or PC_REGNUM) contain the + address of the next instr to be executed when a breakpoint occurs. + Because the kernel gets the next instr (SNIP_REGNUM), the instr in + SNIP needs to be put back into SFIP, and the instr in SXIP should + be shifted to SNIP */ + +/* Are you sitting down? It turns out that the 88K BCS (binary + compatibility standard) folks originally felt that the debugger + should be responsible for backing up the IPs, not the kernel (as is + usually done). Well, they have reversed their decision, and in + future releases our kernel will be handling the backing up of the + IPs. So, eventually, we won't need to do the SHIFT_INST_REGS + stuff. But, for now, since there are 88K systems out there that do + need the debugger to do the IP shifting, and since there will be + systems where the kernel does the shifting, the code is a little + more complex than perhaps it needs to be (we still go inside + SHIFT_INST_REGS, and if the shifting hasn't occurred then gdb goes + ahead and shifts). */ + +extern int target_is_m88110; +#define SHIFT_INST_REGS() \ +if (!target_is_m88110) \ +{ \ + CORE_ADDR pc = read_register (PC_REGNUM); \ + CORE_ADDR npc = read_register (NPC_REGNUM); \ + if (pc != npc) \ + { \ + write_register (NNPC_REGNUM, npc); \ + write_register (NPC_REGNUM, pc); \ + } \ +} + + /* Storing the following registers is a no-op. */ +#define CANNOT_STORE_REGISTER(regno) (((regno) == R0_REGNUM) \ + || ((regno) == X0_REGNUM)) + + /* Number of bytes of storage in the actual machine representation + for register N. On the m88k, the general purpose registers are 4 + bytes and the 88110 extended registers are 10 bytes. */ + +#define REGISTER_RAW_SIZE(N) ((N) < XFP_REGNUM ? 4 : 10) + + /* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#define REGISTER_BYTES ((GP_REGS * REGISTER_RAW_SIZE(0)) \ + + (FP_REGS * REGISTER_RAW_SIZE(XFP_REGNUM))) + + /* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) (((N) * REGISTER_RAW_SIZE(0)) \ + + ((N) >= XFP_REGNUM \ + ? (((N) - XFP_REGNUM) \ + * REGISTER_RAW_SIZE(XFP_REGNUM)) \ + : 0)) + + /* Number of bytes of storage in the program's representation for + register N. On the m88k, all registers are 4 bytes excepting the + m88110 extended registers which are 8 byte doubles. */ + +#define REGISTER_VIRTUAL_SIZE(N) ((N) < XFP_REGNUM ? 4 : 8) + + /* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE (REGISTER_RAW_SIZE(XFP_REGNUM)) + + /* Largest value REGISTER_VIRTUAL_SIZE can have. + Are FPS1, FPS2, FPR "virtual" regisers? */ + +#define MAX_REGISTER_VIRTUAL_SIZE (REGISTER_RAW_SIZE(XFP_REGNUM)) + + /* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#define REGISTER_CONVERTIBLE(N) ((N) >= XFP_REGNUM) + +#include "floatformat.h" + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + double val; \ + floatformat_to_double (&floatformat_m88110_ext, (FROM), &val); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ +} + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + floatformat_from_double (&floatformat_m88110_ext, &val, (TO)); \ +} + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ +((N) >= XFP_REGNUM \ + ? builtin_type_double \ + : ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM \ + ? lookup_pointer_type (builtin_type_void) : builtin_type_int)) + +/* The 88k call/return conventions call for "small" values to be returned + into consecutive registers starting from r2. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy ((VALBUF), &(((char *)REGBUF)[REGISTER_BYTE(RV_REGNUM)]), TYPE_LENGTH (TYPE)) + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (2*REGISTER_RAW_SIZE(0), (VALBUF), TYPE_LENGTH (TYPE)) + +/* In COFF, if PCC says a parameter is a short or a char, do not + change it to int (it seems the convention is to change it). */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. */ + +extern CORE_ADDR frame_chain (); +extern int frame_chain_valid (); +extern int frameless_function_invocation (); + +#define FRAME_CHAIN(thisframe) \ + frame_chain (thisframe) + +#define FRAMELESS_FUNCTION_INVOCATION(frame, fromleaf) \ + fromleaf = frameless_function_invocation (frame) + +/* Define other aspects of the stack frame. */ + +#define FRAME_SAVED_PC(FRAME) \ + frame_saved_pc (FRAME) +extern CORE_ADDR frame_saved_pc (); + +#define FRAME_ARGS_ADDRESS(fi) \ + frame_args_address (fi) +extern CORE_ADDR frame_args_address (); + +#define FRAME_LOCALS_ADDRESS(fi) \ + frame_locals_address (fi) +extern CORE_ADDR frame_locals_address (); + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) ((numargs) = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +/* On the 88k, parameter registers get stored into the so called "homing" + area. This *always* happens when you compiled with GCC and use -g. + Also, (with GCC and -g) the saving of the parameter register values + always happens right within the function prologue code, so these register + values can generally be relied upon to be already copied into their + respective homing slots by the time you will normally try to look at + them (we hope). + + Note that homing area stack slots are always at *positive* offsets from + the frame pointer. Thus, the homing area stack slots for the parameter + registers (passed values) for a given function are actually part of the + frame area of the caller. This is unusual, but it should not present + any special problems for GDB. + + Note also that on the 88k, we are only interested in finding the + registers that might have been saved in memory. This is a subset of + the whole set of registers because the standard calling sequence allows + the called routine to clobber many registers. + + We could manage to locate values for all of the so called "preserved" + registers (some of which may get saved within any particular frame) but + that would require decoding all of the tdesc information. That would be + nice information for GDB to have, but it is not strictly manditory if we + can live without the ability to look at values within (or backup to) + previous frames. +*/ + +struct frame_saved_regs; +struct frame_info; + +void frame_find_saved_regs PARAMS((struct frame_info *fi, + struct frame_saved_regs *fsr)); + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + frame_find_saved_regs (frame_info, &frame_saved_regs) + + +#define POP_FRAME pop_frame () +extern void pop_frame (); + +/* Call function stuff contributed by Kevin Buettner of Motorola. */ + +#define CALL_DUMMY_LOCATION AFTER_TEXT_END + +extern void m88k_push_dummy_frame(); +#define PUSH_DUMMY_FRAME m88k_push_dummy_frame() + +#define CALL_DUMMY { \ +0x67ff00c0, /* 0: subu #sp,#sp,0xc0 */ \ +0x243f0004, /* 4: st #r1,#sp,0x4 */ \ +0x245f0008, /* 8: st #r2,#sp,0x8 */ \ +0x247f000c, /* c: st #r3,#sp,0xc */ \ +0x249f0010, /* 10: st #r4,#sp,0x10 */ \ +0x24bf0014, /* 14: st #r5,#sp,0x14 */ \ +0x24df0018, /* 18: st #r6,#sp,0x18 */ \ +0x24ff001c, /* 1c: st #r7,#sp,0x1c */ \ +0x251f0020, /* 20: st #r8,#sp,0x20 */ \ +0x253f0024, /* 24: st #r9,#sp,0x24 */ \ +0x255f0028, /* 28: st #r10,#sp,0x28 */ \ +0x257f002c, /* 2c: st #r11,#sp,0x2c */ \ +0x259f0030, /* 30: st #r12,#sp,0x30 */ \ +0x25bf0034, /* 34: st #r13,#sp,0x34 */ \ +0x25df0038, /* 38: st #r14,#sp,0x38 */ \ +0x25ff003c, /* 3c: st #r15,#sp,0x3c */ \ +0x261f0040, /* 40: st #r16,#sp,0x40 */ \ +0x263f0044, /* 44: st #r17,#sp,0x44 */ \ +0x265f0048, /* 48: st #r18,#sp,0x48 */ \ +0x267f004c, /* 4c: st #r19,#sp,0x4c */ \ +0x269f0050, /* 50: st #r20,#sp,0x50 */ \ +0x26bf0054, /* 54: st #r21,#sp,0x54 */ \ +0x26df0058, /* 58: st #r22,#sp,0x58 */ \ +0x26ff005c, /* 5c: st #r23,#sp,0x5c */ \ +0x271f0060, /* 60: st #r24,#sp,0x60 */ \ +0x273f0064, /* 64: st #r25,#sp,0x64 */ \ +0x275f0068, /* 68: st #r26,#sp,0x68 */ \ +0x277f006c, /* 6c: st #r27,#sp,0x6c */ \ +0x279f0070, /* 70: st #r28,#sp,0x70 */ \ +0x27bf0074, /* 74: st #r29,#sp,0x74 */ \ +0x27df0078, /* 78: st #r30,#sp,0x78 */ \ +0x63df0000, /* 7c: addu #r30,#sp,0x0 */ \ +0x145f0000, /* 80: ld #r2,#sp,0x0 */ \ +0x147f0004, /* 84: ld #r3,#sp,0x4 */ \ +0x149f0008, /* 88: ld #r4,#sp,0x8 */ \ +0x14bf000c, /* 8c: ld #r5,#sp,0xc */ \ +0x14df0010, /* 90: ld #r6,#sp,0x10 */ \ +0x14ff0014, /* 94: ld #r7,#sp,0x14 */ \ +0x151f0018, /* 98: ld #r8,#sp,0x18 */ \ +0x153f001c, /* 9c: ld #r9,#sp,0x1c */ \ +0x5c200000, /* a0: or.u #r1,#r0,0x0 */ \ +0x58210000, /* a4: or #r1,#r1,0x0 */ \ +0xf400c801, /* a8: jsr #r1 */ \ +0xf000d1ff /* ac: tb0 0x0,#r0,0x1ff */ \ +} + +#define CALL_DUMMY_START_OFFSET 0x80 +#define CALL_DUMMY_LENGTH 0xb0 + +/* FIXME: byteswapping. */ +#define FIX_CALL_DUMMY(dummy, pc, fun, nargs, args, type, gcc_p) \ +{ \ + *(unsigned long *)((char *) (dummy) + 0xa0) |= \ + (((unsigned long) (fun)) >> 16); \ + *(unsigned long *)((char *) (dummy) + 0xa4) |= \ + (((unsigned long) (fun)) & 0xffff); \ + pc = text_end; \ +} + +/* Stack must be aligned on 64-bit boundaries when synthesizing + function calls. */ + +#define STACK_ALIGN(addr) (((addr) + 7) & -8) + +#define STORE_STRUCT_RETURN(addr, sp) \ + write_register (SRA_REGNUM, (addr)) + +#define NEED_TEXT_START_END 1 + +/* According to the MC88100 RISC Microprocessor User's Manual, section + 6.4.3.1.2: + + ... can be made to return to a particular instruction by placing a + valid instruction address in the SNIP and the next sequential + instruction address in the SFIP (with V bits set and E bits clear). + The rte resumes execution at the instruction pointed to by the + SNIP, then the SFIP. + + The E bit is the least significant bit (bit 0). The V (valid) bit is + bit 1. This is why we logical or 2 into the values we are writing + below. It turns out that SXIP plays no role when returning from an + exception so nothing special has to be done with it. We could even + (presumably) give it a totally bogus value. + + -- Kevin Buettner +*/ + +#define TARGET_WRITE_PC(val, pid) { \ + write_register_pid(SXIP_REGNUM, (long) val, pid); \ + write_register_pid(SNIP_REGNUM, (long) val | 2, pid); \ + write_register_pid(SFIP_REGNUM, ((long) val | 2) + 4, pid); \ +} diff --git a/gdb/config/m88k/xm-cxux.h b/gdb/config/m88k/xm-cxux.h new file mode 100644 index 0000000..582c613 --- /dev/null +++ b/gdb/config/m88k/xm-cxux.h @@ -0,0 +1,66 @@ +/* Host-machine dependent parameters for Motorola 88000, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/xm-m88k.h" + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#if !defined (USG) +#define USG 1 +#endif + +#include <sys/param.h> + +#define x_foff _x_x._x_offset +#define x_fname _x_name +#define USER ptrace_user +/* +#define _BSD_WAIT_FLAVOR +*/ + +#define HAVE_TERMIO + +#ifndef USIZE +#define USIZE 2048 +#ifndef UPAGES +#define UPAGES USIZE +#endif +#endif +#define NBPG NBPC + +/* Get rid of any system-imposed stack limit if possible. */ + +#define SET_STACK_LIMIT_HUGE + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +/* Since registers r0 through r31 are stored directly in the struct ptrace_user, + (for m88k BCS) + the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */ + +#define KERNEL_U_ADDR 0 + +/* The CX/UX C compiler doesn't permit complex expressions as array bounds. */ +#define STRICT_ANSI_BOUNDS + +#define CORE_REGISTER_ADDR(regno, reg_ptr) \ + m88k_harris_core_register_addr(regno, reg_ptr) + diff --git a/gdb/config/m88k/xm-delta88.h b/gdb/config/m88k/xm-delta88.h new file mode 100644 index 0000000..2166947 --- /dev/null +++ b/gdb/config/m88k/xm-delta88.h @@ -0,0 +1,45 @@ +/* Host machine description for Motorola Delta 88 system, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/xm-m88k.h" + +#if !defined (USG) +#define USG 1 +#endif + +#include <sys/param.h> +#include <sys/time.h> + +#define HAVE_TERMIO + +/*#define USIZE 2048*/ +/*#define NBPG NBPC*/ +/* Might be defined in <sys/param.h>. I suspect this define was a relic + from before when BFD did core files. */ +/* #define UPAGES USIZE */ + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +/* Since registers r0 through r31 are stored directly in the struct ptrace_user, + (for m88k BCS) + the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */ + +#define KERNEL_U_ADDR 0 diff --git a/gdb/config/m88k/xm-delta88v4.h b/gdb/config/m88k/xm-delta88v4.h new file mode 100644 index 0000000..55c9e2d --- /dev/null +++ b/gdb/config/m88k/xm-delta88v4.h @@ -0,0 +1,22 @@ +/* Host machine description for Motorola Delta 88 box, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/xm-m88k.h" + +#include "xm-sysv4.h" diff --git a/gdb/config/m88k/xm-dgux.h b/gdb/config/m88k/xm-dgux.h new file mode 100644 index 0000000..b3608e7 --- /dev/null +++ b/gdb/config/m88k/xm-dgux.h @@ -0,0 +1,58 @@ +/* Host-machine dependent parameters for Motorola 88000, for GDB. + Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "m88k/xm-m88k.h" + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#if !defined (USG) +#define USG 1 +#endif + +#include <sys/param.h> + +#ifdef __GNUC__ +#define memcpy __builtin_memcpy +/* gcc doesn't have this, at least not gcc 1.92. */ +/* #define memset __builtin_memset */ +#define strcmp __builtin_strcmp +#endif + +#define x_foff _x_x._x_offset +#define x_fname _x_name +#define USER ptrace_user +#define _BSD_WAIT_FLAVOR + +#define HAVE_TERMIO + +#ifndef USIZE +#define USIZE 2048 +#endif +#define NBPG NBPC +#define UPAGES USIZE + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +/* Since registers r0 through r31 are stored directly in the struct ptrace_user, + (for m88k BCS) + the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */ + +#define KERNEL_U_ADDR 0 diff --git a/gdb/config/m88k/xm-m88k.h b/gdb/config/m88k/xm-m88k.h new file mode 100644 index 0000000..35620a0 --- /dev/null +++ b/gdb/config/m88k/xm-m88k.h @@ -0,0 +1,20 @@ +/* Host-machine dependent parameters for Motorola 88000, for GDB. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN diff --git a/gdb/config/mips/bigmips.mt b/gdb/config/mips/bigmips.mt new file mode 100644 index 0000000..38f03f2 --- /dev/null +++ b/gdb/config/mips/bigmips.mt @@ -0,0 +1,3 @@ +# Target: Big-endian MIPS machine such as Sony News +TDEPFILES= mips-tdep.o +TM_FILE= tm-bigmips.h diff --git a/gdb/config/mips/bigmips64.mt b/gdb/config/mips/bigmips64.mt new file mode 100644 index 0000000..fcb7b21 --- /dev/null +++ b/gdb/config/mips/bigmips64.mt @@ -0,0 +1,3 @@ +# Target: Big-endian MIPS machine such as Sony News +TDEPFILES= mips-tdep.o +TM_FILE= tm-bigmips64.h diff --git a/gdb/config/mips/decstation.mh b/gdb/config/mips/decstation.mh new file mode 100644 index 0000000..da417b2 --- /dev/null +++ b/gdb/config/mips/decstation.mh @@ -0,0 +1,5 @@ +# Host: Little-endian MIPS machine such as DECstation. +XDEPFILES= +XM_FILE= xm-mips.h +NAT_FILE= nm-mips.h +NATDEPFILES= infptrace.o inftarg.o corelow.o mips-nat.o fork-child.o diff --git a/gdb/config/mips/decstation.mt b/gdb/config/mips/decstation.mt new file mode 100644 index 0000000..1984722 --- /dev/null +++ b/gdb/config/mips/decstation.mt @@ -0,0 +1,3 @@ +# Target: Little-endian MIPS machine such as DECstation. +TDEPFILES= mips-tdep.o +TM_FILE= tm-mips.h diff --git a/gdb/config/mips/embed.mt b/gdb/config/mips/embed.mt new file mode 100644 index 0000000..42ab4aa --- /dev/null +++ b/gdb/config/mips/embed.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o remote-array.o +TM_FILE= tm-embed.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/embed64.mt b/gdb/config/mips/embed64.mt new file mode 100644 index 0000000..ed60fd2 --- /dev/null +++ b/gdb/config/mips/embed64.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o remote-array.o +TM_FILE= tm-embed64.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/embedl.mt b/gdb/config/mips/embedl.mt new file mode 100644 index 0000000..0ed8b8d --- /dev/null +++ b/gdb/config/mips/embedl.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o remote-array.o +TM_FILE= tm-embedl.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/embedl64.mt b/gdb/config/mips/embedl64.mt new file mode 100644 index 0000000..28c41be --- /dev/null +++ b/gdb/config/mips/embedl64.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o remote-array.o +TM_FILE= tm-embedl64.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/irix3.mh b/gdb/config/mips/irix3.mh new file mode 100644 index 0000000..311d697 --- /dev/null +++ b/gdb/config/mips/irix3.mh @@ -0,0 +1,6 @@ +# Host: SGI Iris running irix 3.x +XDEPFILES= +XM_FILE= xm-irix3.h +NAT_FILE= nm-irix3.h +NATDEPFILES= fork-child.o corelow.o infptrace.o inftarg.o mips-nat.o +XM_CLIBS=-lbsd diff --git a/gdb/config/mips/irix3.mt b/gdb/config/mips/irix3.mt new file mode 100644 index 0000000..b3fa4dd --- /dev/null +++ b/gdb/config/mips/irix3.mt @@ -0,0 +1,3 @@ +# Target: MIPS SGI running Irix 3 +TDEPFILES= mips-tdep.o +TM_FILE= tm-irix3.h diff --git a/gdb/config/mips/irix4.mh b/gdb/config/mips/irix4.mh new file mode 100644 index 0000000..68511e6 --- /dev/null +++ b/gdb/config/mips/irix4.mh @@ -0,0 +1,8 @@ +# Host: SGI Iris running irix 4.x +XDEPFILES= ser-tcp.o +XM_FILE= xm-irix4.h +NAT_FILE= nm-irix4.h +NATDEPFILES= fork-child.o procfs.o irix4-nat.o corelow.o +XM_CLIBS=-lbsd -lsun +# use cc in K&R mode, bump up some static compiler tables. +CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1100 diff --git a/gdb/config/mips/irix5.mh b/gdb/config/mips/irix5.mh new file mode 100644 index 0000000..0e27686 --- /dev/null +++ b/gdb/config/mips/irix5.mh @@ -0,0 +1,6 @@ +# Host: SGI Iris running irix 5.x +XDEPFILES= ser-tcp.o +XM_FILE= xm-irix5.h +NAT_FILE= nm-irix5.h +NATDEPFILES= fork-child.o procfs.o irix5-nat.o corelow.o +XM_CLIBS=-lbsd -lsun diff --git a/gdb/config/mips/irix5.mt b/gdb/config/mips/irix5.mt new file mode 100644 index 0000000..5b17bcd --- /dev/null +++ b/gdb/config/mips/irix5.mt @@ -0,0 +1,3 @@ +# Target: MIPS SGI running Irix 5 +TDEPFILES= mips-tdep.o +TM_FILE= tm-irix5.h diff --git a/gdb/config/mips/littlemips.mh b/gdb/config/mips/littlemips.mh new file mode 100644 index 0000000..103919d --- /dev/null +++ b/gdb/config/mips/littlemips.mh @@ -0,0 +1,3 @@ +# Host: Little-endian MIPS machine such as DECstation. +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o +XM_FILE= xm-mips.h diff --git a/gdb/config/mips/littlemips.mt b/gdb/config/mips/littlemips.mt new file mode 100644 index 0000000..1984722 --- /dev/null +++ b/gdb/config/mips/littlemips.mt @@ -0,0 +1,3 @@ +# Target: Little-endian MIPS machine such as DECstation. +TDEPFILES= mips-tdep.o +TM_FILE= tm-mips.h diff --git a/gdb/config/mips/mipsm3.mh b/gdb/config/mips/mipsm3.mh new file mode 100644 index 0000000..e049d68 --- /dev/null +++ b/gdb/config/mips/mipsm3.mh @@ -0,0 +1,7 @@ +# Host: Little endian MIPS machine such as pmax +# running Mach 3.0 operating system + +XDEPFILES= core-aout.o +NATDEPFILES= mipsm3-nat.o m3-nat.o +XM_FILE= xm-mipsm3.h +NAT_FILE= ../nm-m3.h diff --git a/gdb/config/mips/mipsm3.mt b/gdb/config/mips/mipsm3.mt new file mode 100644 index 0000000..66856d1 --- /dev/null +++ b/gdb/config/mips/mipsm3.mt @@ -0,0 +1,4 @@ +# Target: Little-endian MIPS machine such as pmax +# running Mach 3.0 operating system +TDEPFILES= mips-tdep.o +TM_FILE= tm-mipsm3.h diff --git a/gdb/config/mips/mipsv4.mh b/gdb/config/mips/mipsv4.mh new file mode 100644 index 0000000..87cb7e4 --- /dev/null +++ b/gdb/config/mips/mipsv4.mh @@ -0,0 +1,4 @@ +# Host: Mips running SVR4 +XM_FILE= xm-mipsv4.h +NAT_FILE= ../nm-sysv4.h +NATDEPFILES= fork-child.o procfs.o mipsv4-nat.o corelow.o core-regset.o solib.o diff --git a/gdb/config/mips/mipsv4.mt b/gdb/config/mips/mipsv4.mt new file mode 100644 index 0000000..6d3b47d --- /dev/null +++ b/gdb/config/mips/mipsv4.mt @@ -0,0 +1,3 @@ +# Target: MIPS running SVR4 +TDEPFILES= mips-tdep.o +TM_FILE= tm-mipsv4.h diff --git a/gdb/config/mips/news-mips.mh b/gdb/config/mips/news-mips.mh new file mode 100644 index 0000000..620fbaa --- /dev/null +++ b/gdb/config/mips/news-mips.mh @@ -0,0 +1,4 @@ +# Host: Big-endian MIPS machine such as Sony News +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o mips-nat.o +XM_FILE= xm-news-mips.h +NAT_FILE= nm-news-mips.h diff --git a/gdb/config/mips/nm-irix3.h b/gdb/config/mips/nm-irix3.h new file mode 100644 index 0000000..3f4b064 --- /dev/null +++ b/gdb/config/mips/nm-irix3.h @@ -0,0 +1,37 @@ +/* Definitions for SGI irix3 native support. + Copyright 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Don't need special routines for Irix v3 -- we can use infptrace.c */ +#undef FETCH_INFERIOR_REGISTERS + +#define U_REGS_OFFSET 0 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + argument regs. a0 (CALL_ARG0) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); + +/* Is this really true or is this just a leftover from a DECstation + config file? */ + +#define ONE_PROCESS_WRITETEXT diff --git a/gdb/config/mips/nm-irix4.h b/gdb/config/mips/nm-irix4.h new file mode 100644 index 0000000..017695c --- /dev/null +++ b/gdb/config/mips/nm-irix4.h @@ -0,0 +1,61 @@ +/* Definitions for native support of irix4. + +Copyright (C) 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Let's use /debug instead of all this dangerous mucking about + * with ptrace(), which seems *extremely* fragile, anyway. + */ +#define USE_PROC_FS +#define CTL_PROC_NAME_FMT "/debug/%d" +#define AS_PROC_NAME_FMT "/debug/%d" +#define MAP_PROC_NAME_FMT "/debug/%d" +#define STATUS_PROC_NAME_FMT "/debug/%d" + +/* Don't need special routines for the SGI -- we can use infptrace.c */ +#undef FETCH_INFERIOR_REGISTERS + +#define U_REGS_OFFSET 0 + +/* Is this really true or is this just a leftover from a DECstation + config file? */ + +#define ONE_PROCESS_WRITETEXT + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +/* Temporary new watchpoint stuff */ +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + ((type) == bp_hardware_watchpoint) + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. */ + +#define STOPPED_BY_WATCHPOINT(W) \ + procfs_stopped_by_watchpoint(inferior_pid) +extern int procfs_stopped_by_watchpoint PARAMS ((int)); + +#define HAVE_NONSTEPPABLE_WATCHPOINT + +/* Use these macros for watchpoint insertion/deletion. */ +/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */ +#define target_insert_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, len, 2) +#define target_remove_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, 0, 0) +extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int)); diff --git a/gdb/config/mips/nm-irix5.h b/gdb/config/mips/nm-irix5.h new file mode 100644 index 0000000..90d454b --- /dev/null +++ b/gdb/config/mips/nm-irix5.h @@ -0,0 +1,44 @@ +/* Definitions for native support of irix5. + +Copyright (C) 1993, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-sysv4.h" +#undef IN_SOLIB_DYNSYM_RESOLVE_CODE + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +/* Temporary new watchpoint stuff */ +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + ((type) == bp_hardware_watchpoint) + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. */ + +#define STOPPED_BY_WATCHPOINT(W) \ + procfs_stopped_by_watchpoint(inferior_pid) +extern int procfs_stopped_by_watchpoint PARAMS ((int)); + +#define HAVE_NONSTEPPABLE_WATCHPOINT + +/* Use these macros for watchpoint insertion/deletion. */ +/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */ +#define target_insert_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, len, 2) +#define target_remove_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, 0, 0) +extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int)); diff --git a/gdb/config/mips/nm-mips.h b/gdb/config/mips/nm-mips.h new file mode 100644 index 0000000..6418b86 --- /dev/null +++ b/gdb/config/mips/nm-mips.h @@ -0,0 +1,32 @@ +/* Native definitions for GDB on DECstations, Sony News. and MIPS Riscos systems + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin(af@cs.cmu.edu) at CMU + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + argument regs. a0 (CALL_ARG0) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +extern int get_longjmp_target PARAMS ((CORE_ADDR *)); diff --git a/gdb/config/mips/nm-news-mips.h b/gdb/config/mips/nm-news-mips.h new file mode 100644 index 0000000..1ab63ba --- /dev/null +++ b/gdb/config/mips/nm-news-mips.h @@ -0,0 +1,42 @@ +/* Definitions to make GDB run on a mips box under 4.3bsd. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin(af@cs.cmu.edu) at CMU + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_NEWS_MIPS_H +#define NM_NEWS_MIPS_H 1 + +/* Needed for RISC NEWS core files. */ +#include <machine/machparam.h> +#include <sys/types.h> +#define KERNEL_U_ADDR UADDR + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + if (regno < 38) addr = (NBPG*UPAGES) + (regno - 38)*sizeof(int);\ + else addr = 0; /* ..somewhere in the pcb */ + +/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */ +#define ONE_PROCESS_WRITETEXT + +#include "mips/nm-mips.h" + +/* Apparently not in <sys/types.h> */ +typedef int pid_t; + +#endif /* NM_NEWS_MIPS_H */ diff --git a/gdb/config/mips/nm-riscos.h b/gdb/config/mips/nm-riscos.h new file mode 100644 index 0000000..2d54345 --- /dev/null +++ b/gdb/config/mips/nm-riscos.h @@ -0,0 +1,59 @@ +/* This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* MIPS running RISC/os 4.52C. */ + +#define PCB_OFFSET(FIELD) ((int)&((struct user*)0)->u_pcb.FIELD) + +/* RISC/os 5.0 defines this in machparam.h. */ +#include <bsd43/machine/machparam.h> +#define NBPG BSD43_NBPG +#define UPAGES BSD43_UPAGES + +/* Where is this used? I don't see any uses in mips-nat.c, and I don't think + the uses in infptrace.c are used if FETCH_INFERIOR_REGISTERS is defined. + Does the compiler react badly to "extern CORE_ADDR kernel_u_addr" (even + if never referenced)? */ +#define KERNEL_U_ADDR BSD43_UADDR + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + if (regno < FP0_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*((regno)+EF_AT-1); \ + else if (regno < PC_REGNUM) \ + addr = PCB_OFFSET(pcb_fpregs[0]) + 4*(regno-FP0_REGNUM); \ + else if (regno == PS_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_SR; \ + else if (regno == BADVADDR_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_BADVADDR; \ + else if (regno == LO_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_MDLO; \ + else if (regno == HI_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_MDHI; \ + else if (regno == CAUSE_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_CAUSE; \ + else if (regno == PC_REGNUM) \ + addr = UPAGES*NBPG-EF_SIZE+4*EF_EPC; \ + else if (regno < FCRCS_REGNUM) \ + addr = PCB_OFFSET(pcb_fpregs[0]) + 4*(regno-FP0_REGNUM); \ + else if (regno == FCRCS_REGNUM) \ + addr = PCB_OFFSET(pcb_fpc_csr); \ + else if (regno == FCRIR_REGNUM) \ + addr = PCB_OFFSET(pcb_fpc_eir); \ + else \ + addr = 0; + +#include "mips/nm-mips.h" + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS diff --git a/gdb/config/mips/riscos.mh b/gdb/config/mips/riscos.mh new file mode 100644 index 0000000..6a3192f --- /dev/null +++ b/gdb/config/mips/riscos.mh @@ -0,0 +1,16 @@ +# Host: MIPS running RISC/os + +XM_FILE= xm-riscos.h + +NAT_FILE= nm-riscos.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o mips-nat.o + +MH_CFLAGS=-Wf,-XNh10000 + +# ptrace(2) apparently has problems in the BSD environment. No workaround is +# known except to select the sysv environment. Could we use /proc instead? +# These "sysv environments" and "bsd environments" often end up being a pain. +# +# This is not part of CFLAGS because perhaps not all C compilers have this +# option. +CC= cc -systype sysv diff --git a/gdb/config/mips/tm-bigmips.h b/gdb/config/mips/tm-bigmips.h new file mode 100644 index 0000000..271ceb0 --- /dev/null +++ b/gdb/config/mips/tm-bigmips.h @@ -0,0 +1,21 @@ +/* Copyright (C) 1990 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN + +#include "mips/tm-mips.h" diff --git a/gdb/config/mips/tm-bigmips64.h b/gdb/config/mips/tm-bigmips64.h new file mode 100644 index 0000000..8b255a5 --- /dev/null +++ b/gdb/config/mips/tm-bigmips64.h @@ -0,0 +1,23 @@ +/* Target machine parameters for MIPS r4000 + Copyright 1994 Free Software Foundation, Inc. + Contributed by Ian Lance Taylor (ian@cygnus.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN + +#include "mips/tm-mips64.h" diff --git a/gdb/config/mips/tm-embed.h b/gdb/config/mips/tm-embed.h new file mode 100644 index 0000000..7bf1759 --- /dev/null +++ b/gdb/config/mips/tm-embed.h @@ -0,0 +1,49 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 + +#include "mips/tm-bigmips.h" + +#undef DEFAULT_MIPS_TYPE +#define DEFAULT_MIPS_TYPE "r3051" + +/* Watchpoint support */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +/* Use these macros for watchpoint insertion/deletion. */ +/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */ + +#define target_insert_watchpoint(addr, len, type) \ + remote_mips_set_watchpoint (addr, len, type) +int remote_mips_set_watchpoint PARAMS ((CORE_ADDR addr, int len, int type)); + +#define target_remove_watchpoint(addr, len, type) \ + remote_mips_remove_watchpoint (addr, len, type) +int remote_mips_remove_watchpoint PARAMS ((CORE_ADDR addr, int len, int type)); + +/* We need to remove watchpoints when stepping, else we hit them again! */ + +#define HAVE_NONSTEPPABLE_WATCHPOINT + +#define STOPPED_BY_WATCHPOINT(w) remote_mips_stopped_by_watchpoint () + +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + remote_mips_can_use_hardware_watchpoint(cnt) +int remote_mips_can_use_hardware_watchpoint PARAMS ((int cnt)); diff --git a/gdb/config/mips/tm-embed64.h b/gdb/config/mips/tm-embed64.h new file mode 100644 index 0000000..df90f58 --- /dev/null +++ b/gdb/config/mips/tm-embed64.h @@ -0,0 +1,21 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 + +#include "mips/tm-bigmips64.h" diff --git a/gdb/config/mips/tm-embedl.h b/gdb/config/mips/tm-embedl.h new file mode 100644 index 0000000..23abcd9 --- /dev/null +++ b/gdb/config/mips/tm-embedl.h @@ -0,0 +1,21 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 + +#include "mips/tm-mips.h" diff --git a/gdb/config/mips/tm-embedl64.h b/gdb/config/mips/tm-embedl64.h new file mode 100644 index 0000000..c7dca19 --- /dev/null +++ b/gdb/config/mips/tm-embedl64.h @@ -0,0 +1,21 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 + +#include "mips/tm-mips64.h" diff --git a/gdb/config/mips/tm-irix3.h b/gdb/config/mips/tm-irix3.h new file mode 100644 index 0000000..7e8e53e --- /dev/null +++ b/gdb/config/mips/tm-irix3.h @@ -0,0 +1,81 @@ +/* Target machine description for SGI Iris under Irix, for GDB. + Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "mips/tm-bigmips.h" + +/* SGI's assembler doesn't grok dollar signs in identifiers. + So we use dots instead. This item must be coordinated with G++. */ +#undef CPLUS_MARKER +#define CPLUS_MARKER '.' + +/* Redefine register numbers for SGI. */ + +#undef NUM_REGS +#undef REGISTER_NAMES +#undef FP0_REGNUM +#undef PC_REGNUM +#undef PS_REGNUM +#undef HI_REGNUM +#undef LO_REGNUM +#undef CAUSE_REGNUM +#undef BADVADDR_REGNUM +#undef FCRCS_REGNUM +#undef FCRIR_REGNUM + +/* Number of machine registers */ + +#define NUM_REGS 71 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES \ + { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \ + "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \ + "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \ + "t8", "t9", "k0", "k1", "gp", "sp", "fp", "ra", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\ + "pc", "cause", "bad", "hi", "lo", "fsr", "fir" \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define FP0_REGNUM 32 /* Floating point register 0 (single float) */ +#define PC_REGNUM 64 /* Contains program counter */ +#define CAUSE_REGNUM 65 /* describes last exception */ +#define BADVADDR_REGNUM 66 /* bad vaddr for addressing exception */ +#define HI_REGNUM 67 /* Multiple/divide temp */ +#define LO_REGNUM 68 /* ... */ +#define FCRCS_REGNUM 69 /* FP control/status */ +#define FCRIR_REGNUM 70 /* FP implementation/revision */ + +/* Offsets for register values in _sigtramp frame. + sigcontext is immediately above the _sigtramp frame on Irix. */ +#define SIGFRAME_BASE 0x0 +#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * 4) +#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 3 * 4) +#define SIGFRAME_FPREGSAVE_OFF (SIGFRAME_BASE + 3 * 4 + 32 * 4 + 4) diff --git a/gdb/config/mips/tm-irix5.h b/gdb/config/mips/tm-irix5.h new file mode 100644 index 0000000..ad98e88 --- /dev/null +++ b/gdb/config/mips/tm-irix5.h @@ -0,0 +1,75 @@ +/* Target machine description for SGI Iris under Irix 5, for GDB. + Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "mips/tm-irix3.h" + +#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32 +/* + * Irix 6 (n32 ABI) has 32-bit GP regs and 64-bit FP regs + */ + +#undef REGISTER_BYTES +#define REGISTER_BYTES (MIPS_NUMREGS * 8 + (NUM_REGS - MIPS_NUMREGS) * MIPS_REGSIZE) + +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ + (((N) < FP0_REGNUM) ? (N) * MIPS_REGSIZE : \ + ((N) < FP0_REGNUM + 32) ? \ + FP0_REGNUM * MIPS_REGSIZE + \ + ((N) - FP0_REGNUM) * sizeof(double) : \ + 32 * sizeof(double) + ((N) - 32) * MIPS_REGSIZE) + +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_double \ + : ((N) == 32 /*SR*/) ? builtin_type_uint32 \ + : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \ + : builtin_type_int) + +#undef MIPS_LAST_ARG_REGNUM +#define MIPS_LAST_ARG_REGNUM 11 /* N32 uses R4 through R11 for args */ + +#undef MIPS_NUM_ARG_REGS +#define MIPS_NUM_ARG_REGS 8 + +#endif /* N32 */ + +/* When calling functions on Irix 5 (or any MIPS SVR4 ABI compliant + platform) $25 must hold the function address. Dest_Reg is a macro + used in CALL_DUMMY in tm-mips.h. */ +#undef Dest_Reg +#define Dest_Reg 25 + +/* The signal handler trampoline is called _sigtramp. */ +#undef IN_SIGTRAMP +#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigtramp", name)) + +/* Irix 5 saves a full 64 bits for each register. We skip 2 * 4 to + get to the saved PC (the register mask and status register are both + 32 bits) and then another 4 to get to the lower 32 bits. We skip + the same 4 bytes, plus the 8 bytes for the PC to get to the + registers, and add another 4 to get to the lower 32 bits. We skip + 8 bytes per register. */ +#undef SIGFRAME_PC_OFF +#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 2 * 4 + 4) +#undef SIGFRAME_REGSAVE_OFF +#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 2 * 4 + 8 + 4) +#undef SIGFRAME_FPREGSAVE_OFF +#define SIGFRAME_FPREGSAVE_OFF (SIGFRAME_BASE + 2 * 4 + 8 + 32 * 8 + 4) +#define SIGFRAME_REG_SIZE 8 diff --git a/gdb/config/mips/tm-mips.h b/gdb/config/mips/tm-mips.h new file mode 100644 index 0000000..6a7091a --- /dev/null +++ b/gdb/config/mips/tm-mips.h @@ -0,0 +1,560 @@ +/* Definitions to make GDB run on a mips box under 4.3bsd. + Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995 + Free Software Foundation, Inc. + Contributed by Per Bothner (bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin (af@cs.cmu.edu) at CMU.. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_MIPS_H +#define TM_MIPS_H 1 + +#ifdef __STDC__ +struct frame_info; +struct symbol; +struct type; +struct value; +#endif + +#include <bfd.h> +#include "coff/sym.h" /* Needed for PDR below. */ +#include "coff/symconst.h" + +#if !defined (TARGET_BYTE_ORDER_DEFAULT) +#define TARGET_BYTE_ORDER_DEFAULT LITTLE_ENDIAN +#endif + +#if !defined (GDB_TARGET_IS_MIPS64) +#define GDB_TARGET_IS_MIPS64 0 +#endif + +#if !defined (MIPS_EABI) +#define MIPS_EABI 0 +#endif + +#if !defined (TARGET_MONITOR_PROMPT) +#define TARGET_MONITOR_PROMPT "<IDT>" +#endif + +/* PC should be masked to remove possible MIPS16 flag */ +#if !defined (GDB_TARGET_MASK_DISAS_PC) +#define GDB_TARGET_MASK_DISAS_PC(addr) UNMAKE_MIPS16_ADDR(addr) +#endif +#if !defined (GDB_TARGET_UNMASK_DISAS_PC) +#define GDB_TARGET_UNMASK_DISAS_PC(addr) MAKE_MIPS16_ADDR(addr) +#endif + +/* Floating point is IEEE compliant */ +#define IEEE_FLOAT + +/* The name of the usual type of MIPS processor that is in the target + system. */ + +#define DEFAULT_MIPS_TYPE "generic" + +/* Remove useless bits from an instruction address. */ + +#define ADDR_BITS_REMOVE(addr) mips_addr_bits_remove(addr) +CORE_ADDR mips_addr_bits_remove PARAMS ((CORE_ADDR addr)); + +/* Remove useless bits from the stack pointer. */ + +#define TARGET_READ_SP() ADDR_BITS_REMOVE (read_register (SP_REGNUM)) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) pc = mips_skip_prologue (pc, 0) +extern CORE_ADDR mips_skip_prologue PARAMS ((CORE_ADDR addr, int lenient)); + +/* Return non-zero if PC points to an instruction which will cause a step + to execute both the instruction at PC and an instruction at PC+4. */ +extern int mips_step_skips_delay PARAMS ((CORE_ADDR)); +#define STEP_SKIPS_DELAY_P (1) +#define STEP_SKIPS_DELAY(pc) (mips_step_skips_delay (pc)) + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) read_register(RA_REGNUM) + +/* Are we currently handling a signal */ + +extern int in_sigtramp PARAMS ((CORE_ADDR, char *)); +#define IN_SIGTRAMP(pc, name) in_sigtramp(pc, name) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define BIG_ENDIAN 4321 + +/* BREAKPOINT_FROM_PC uses the program counter value to determine whether a + 16- or 32-bit breakpoint should be used. It returns a pointer + to a string of bytes that encode a breakpoint instruction, stores + the length of the string to *lenptr, and adjusts the pc (if necessary) to + point to the actual memory location where the breakpoint should be + inserted. */ + +extern breakpoint_from_pc_fn mips_breakpoint_from_pc; +#define BREAKPOINT_FROM_PC(pcptr, lenptr) mips_breakpoint_from_pc(pcptr, lenptr) + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* The size of a register. This is predefined in tm-mips64.h. We + can't use REGISTER_SIZE because that is used for various other + things. */ + +#ifndef MIPS_REGSIZE +#define MIPS_REGSIZE 4 +#endif + +/* The sizes of floating point registers. */ + +#define MIPS_FPU_SINGLE_REGSIZE 4 +#define MIPS_FPU_DOUBLE_REGSIZE 8 + +/* Number of machine registers */ + +#ifndef NUM_REGS +#define NUM_REGS 90 +#endif + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#ifndef REGISTER_NAMES +#define REGISTER_NAMES \ + { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \ + "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \ + "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \ + "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", \ + "sr", "lo", "hi", "bad", "cause","pc", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\ + "fsr", "fir", "fp", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + } +#endif + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define ZERO_REGNUM 0 /* read-only register, always 0 */ +#define V0_REGNUM 2 /* Function integer return value */ +#define A0_REGNUM 4 /* Loc of first arg during a subr call */ +#if MIPS_EABI +# define MIPS_LAST_ARG_REGNUM 11 /* EABI uses R4 through R11 for args */ +# define MIPS_NUM_ARG_REGS 8 +#else +# define MIPS_LAST_ARG_REGNUM 7 /* old ABI uses R4 through R7 for args */ +# define MIPS_NUM_ARG_REGS 4 +#endif +#define T9_REGNUM 25 /* Contains address of callee in PIC */ +#define SP_REGNUM 29 /* Contains address of top of stack */ +#define RA_REGNUM 31 /* Contains return address value */ +#define PS_REGNUM 32 /* Contains processor status */ +#define HI_REGNUM 34 /* Multiple/divide temp */ +#define LO_REGNUM 33 /* ... */ +#define BADVADDR_REGNUM 35 /* bad vaddr for addressing exception */ +#define CAUSE_REGNUM 36 /* describes last exception */ +#define PC_REGNUM 37 /* Contains program counter */ +#define FP0_REGNUM 38 /* Floating point register 0 (single float) */ +#define FPA0_REGNUM (FP0_REGNUM+12) /* First float argument register */ +#if MIPS_EABI /* EABI uses F12 through F19 for args */ +# define MIPS_LAST_FP_ARG_REGNUM (FP0_REGNUM+19) +# define MIPS_NUM_FP_ARG_REGS 8 +#else /* old ABI uses F12 through F15 for args */ +# define MIPS_LAST_FP_ARG_REGNUM (FP0_REGNUM+15) +# define MIPS_NUM_FP_ARG_REGS 4 +#endif +#define FCRCS_REGNUM 70 /* FP control/status */ +#define FCRIR_REGNUM 71 /* FP implementation/revision */ +#define FP_REGNUM 72 /* Pseudo register that contains true address of executing stack frame */ +#define UNUSED_REGNUM 73 /* Never used, FIXME */ +#define FIRST_EMBED_REGNUM 74 /* First CP0 register for embedded use */ +#define PRID_REGNUM 89 /* Processor ID */ +#define LAST_EMBED_REGNUM 89 /* Last one */ + +/* Define DO_REGISTERS_INFO() to do machine-specific formatting + of register dumps. */ + +#define DO_REGISTERS_INFO(_regnum, fp) mips_do_registers_info(_regnum, fp) +extern void mips_do_registers_info PARAMS ((int, int)); + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#define REGISTER_BYTES (NUM_REGS*MIPS_REGSIZE) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * MIPS_REGSIZE) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) REGISTER_VIRTUAL_SIZE(N) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (N)) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type of data in + register N. */ + +#ifndef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_float \ + : ((N) == 32 /*SR*/) ? builtin_type_uint32 \ + : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \ + : builtin_type_int) +#endif + +/* All mips targets store doubles in a register pair with the least + significant register in the lower numbered register. + If the target is big endian, double register values need conversion + between memory and register formats. */ + +#define REGISTER_CONVERT_TO_TYPE(n, type, buffer) \ + do {if (TARGET_BYTE_ORDER == BIG_ENDIAN \ + && REGISTER_RAW_SIZE (n) == 4 \ + && (n) >= FP0_REGNUM && (n) < FP0_REGNUM + 32 \ + && TYPE_CODE(type) == TYPE_CODE_FLT \ + && TYPE_LENGTH(type) == 8) { \ + char __temp[4]; \ + memcpy (__temp, ((char *)(buffer))+4, 4); \ + memcpy (((char *)(buffer))+4, (buffer), 4); \ + memcpy (((char *)(buffer)), __temp, 4); }} while (0) + +#define REGISTER_CONVERT_FROM_TYPE(n, type, buffer) \ + do {if (TARGET_BYTE_ORDER == BIG_ENDIAN \ + && REGISTER_RAW_SIZE (n) == 4 \ + && (n) >= FP0_REGNUM && (n) < FP0_REGNUM + 32 \ + && TYPE_CODE(type) == TYPE_CODE_FLT \ + && TYPE_LENGTH(type) == 8) { \ + char __temp[4]; \ + memcpy (__temp, ((char *)(buffer))+4, 4); \ + memcpy (((char *)(buffer))+4, (buffer), 4); \ + memcpy (((char *)(buffer)), __temp, 4); }} while (0) + +/* Store the address of the place in which to copy the structure the + subroutine will return. Handled by mips_push_arguments. */ + +#define STORE_STRUCT_RETURN(addr, sp) /**/ + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. XXX floats */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + mips_extract_return_value(TYPE, REGBUF, VALBUF) +extern void +mips_extract_return_value PARAMS ((struct type *, char [], char *)); + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + mips_store_return_value(TYPE, VALBUF) +extern void mips_store_return_value PARAMS ((struct type *, char *)); + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +/* The address is passed in a0 upon entry to the function, but when + the function exits, the compiler has copied the value to v0. This + convention is specified by the System V ABI, so I think we can rely + on it. */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \ + REGISTER_RAW_SIZE (V0_REGNUM))) + +extern use_struct_convention_fn mips_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) mips_use_struct_convention (gcc_p, type) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +#define FRAME_CHAIN(thisframe) (CORE_ADDR) mips_frame_chain (thisframe) +extern CORE_ADDR mips_frame_chain PARAMS ((struct frame_info *)); + +/* Define other aspects of the stack frame. */ + + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +/* We handle this differently for mips, and maybe we should not */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) {(FRAMELESS) = 0;} + +/* Saved Pc. */ + +#define FRAME_SAVED_PC(FRAME) (mips_frame_saved_pc(FRAME)) +extern CORE_ADDR mips_frame_saved_pc PARAMS ((struct frame_info *)); + +#define FRAME_ARGS_ADDRESS(fi) (fi)->frame + +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(num, fi) (num = mips_frame_num_args(fi)) +extern int mips_frame_num_args PARAMS ((struct frame_info *)); + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_INIT_SAVED_REGS(frame_info) \ + do { \ + if ((frame_info)->saved_regs == NULL) \ + mips_find_saved_regs (frame_info); \ + (frame_info)->saved_regs[SP_REGNUM] = (frame_info)->frame; \ + } while (0) +extern void mips_find_saved_regs PARAMS ((struct frame_info *)); + + +/* Things needed for making the inferior call functions. */ + +/* Stack must be aligned on 32-bit boundaries when synthesizing + function calls. We don't need STACK_ALIGN, PUSH_ARGUMENTS will + handle it. */ + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = mips_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR +mips_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME mips_push_dummy_frame() +extern void mips_push_dummy_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME mips_pop_frame() +extern void mips_pop_frame PARAMS ((void)); + +#define CALL_DUMMY { 0 } + +#define CALL_DUMMY_START_OFFSET (0) + +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) + +/* On Irix, $t9 ($25) contains the address of the callee (used for PIC). + It doesn't hurt to do this on other systems; $t9 will be ignored. */ +#define FIX_CALL_DUMMY(dummyname, start_sp, fun, nargs, args, rettype, gcc_p) \ + write_register(T9_REGNUM, fun) + +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT + +#define CALL_DUMMY_ADDRESS() (mips_call_dummy_address ()) +extern CORE_ADDR mips_call_dummy_address PARAMS ((void)); + +/* There's a mess in stack frame creation. See comments in blockframe.c + near reference to INIT_FRAME_PC_FIRST. */ + +#define INIT_FRAME_PC(fromleaf, prev) /* nada */ + +#define INIT_FRAME_PC_FIRST(fromleaf, prev) \ + mips_init_frame_pc_first(fromleaf, prev) +extern void mips_init_frame_pc_first PARAMS ((int, struct frame_info *)); + +/* Special symbol found in blocks associated with routines. We can hang + mips_extra_func_info_t's off of this. */ + +#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__" +extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR)); + +/* Specific information about a procedure. + This overlays the MIPS's PDR records, + mipsread.c (ab)uses this to save memory */ + +typedef struct mips_extra_func_info { + long numargs; /* number of args to procedure (was iopt) */ + bfd_vma high_addr; /* upper address bound */ + long frame_adjust; /* offset of FP from SP (used on MIPS16) */ + PDR pdr; /* Procedure descriptor record */ +} *mips_extra_func_info_t; + +#define EXTRA_FRAME_INFO \ + mips_extra_func_info_t proc_desc; \ + int num_args; + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci) +extern void init_extra_frame_info PARAMS ((struct frame_info *)); + +#define PRINT_EXTRA_FRAME_INFO(fi) \ + { \ + if (fi && fi->proc_desc && fi->proc_desc->pdr.framereg < NUM_REGS) \ + printf_filtered (" frame pointer is at %s+%d\n", \ + REGISTER_NAME (fi->proc_desc->pdr.framereg), \ + fi->proc_desc->pdr.frameoffset); \ + } + +/* It takes two values to specify a frame on the MIPS. + + In fact, the *PC* is the primary value that sets up a frame. The + PC is looked up to see what function it's in; symbol information + from that function tells us which register is the frame pointer + base, and what offset from there is the "virtual frame pointer". + (This is usually an offset from SP.) On most non-MIPS machines, + the primary value is the SP, and the PC, if needed, disambiguates + multiple functions with the same SP. But on the MIPS we can't do + that since the PC is not stored in the same part of the frame every + time. This does not seem to be a very clever way to set up frames, + but there is nothing we can do about that). */ + +#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) +extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *)); + +/* Convert a dbx stab register number (from `r' declaration) to a gdb REGNUM */ + +#define STAB_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-38) + +/* Convert a ecoff register number to a gdb REGNUM */ + +#define ECOFF_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-32) + +/* If the current gcc for for this target does not produce correct debugging + information for float parameters, both prototyped and unprototyped, then + define this macro. This forces gdb to always assume that floats are + passed as doubles and then converted in the callee. + + For the mips chip, it appears that the debug info marks the parameters as + floats regardless of whether the function is prototyped, but the actual + values are passed as doubles for the non-prototyped case and floats for + the prototyped case. Thus we choose to make the non-prototyped case work + for C and break the prototyped case, since the non-prototyped case is + probably much more common. (FIXME). */ + +#define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c) + +/* Select the default mips disassembler */ + +#define TM_PRINT_INSN_MACH 0 + + +/* These are defined in mdebugread.c and are used in mips-tdep.c */ +extern CORE_ADDR sigtramp_address, sigtramp_end; +extern void fixup_sigtramp PARAMS ((void)); + +/* Defined in mips-tdep.c and used in remote-mips.c */ +extern char *mips_read_processor_type PARAMS ((void)); + +/* Functions for dealing with MIPS16 call and return stubs. */ +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) mips_in_call_stub (pc, name) +#define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) mips_in_return_stub (pc, name) +#define SKIP_TRAMPOLINE_CODE(pc) mips_skip_stub (pc) +#define IGNORE_HELPER_CALL(pc) mips_ignore_helper (pc) +extern int mips_in_call_stub PARAMS ((CORE_ADDR pc, char *name)); +extern int mips_in_return_stub PARAMS ((CORE_ADDR pc, char *name)); +extern CORE_ADDR mips_skip_stub PARAMS ((CORE_ADDR pc)); +extern int mips_ignore_helper PARAMS ((CORE_ADDR pc)); + +#ifndef TARGET_MIPS +#define TARGET_MIPS +#endif + +/* Definitions and declarations used by mips-tdep.c and remote-mips.c */ +#define MIPS_INSTLEN 4 /* Length of an instruction */ +#define MIPS16_INSTLEN 2 /* Length of an instruction on MIPS16*/ +#define MIPS_NUMREGS 32 /* Number of integer or float registers */ +typedef unsigned long t_inst; /* Integer big enough to hold an instruction */ + +/* MIPS16 function addresses are odd (bit 0 is set). Here are some + macros to test, set, or clear bit 0 of addresses. */ +#define IS_MIPS16_ADDR(addr) ((addr) & 1) +#define MAKE_MIPS16_ADDR(addr) ((addr) | 1) +#define UNMAKE_MIPS16_ADDR(addr) ((addr) & ~1) + +#endif /* TM_MIPS_H */ + +/* Macros for setting and testing a bit in a minimal symbol that + marks it as 16-bit function. The MSB of the minimal symbol's + "info" field is used for this purpose. This field is already + being used to store the symbol size, so the assumption is + that the symbol size cannot exceed 2^31. + + ELF_MAKE_MSYMBOL_SPECIAL + tests whether an ELF symbol is "special", i.e. refers + to a 16-bit function, and sets a "special" bit in a + minimal symbol to mark it as a 16-bit function + MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol + MSYMBOL_SIZE returns the size of the minimal symbol, i.e. + the "info" field with the "special" bit masked out +*/ + +#define ELF_MAKE_MSYMBOL_SPECIAL(sym,msym) \ + { \ + if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16) { \ + MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) | 0x80000000); \ + SYMBOL_VALUE_ADDRESS (msym) |= 1; \ + } \ + } + +#define MSYMBOL_IS_SPECIAL(msym) \ + (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0) +#define MSYMBOL_SIZE(msym) \ + ((long) MSYMBOL_INFO (msym) & 0x7fffffff) diff --git a/gdb/config/mips/tm-mips64.h b/gdb/config/mips/tm-mips64.h new file mode 100644 index 0000000..56a8927 --- /dev/null +++ b/gdb/config/mips/tm-mips64.h @@ -0,0 +1,54 @@ +/* Target machine parameters for MIPS r4000 + Copyright 1994, 1996 Free Software Foundation, Inc. + Contributed by Ian Lance Taylor (ian@cygnus.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDB_TARGET_IS_MIPS64 1 + +/* Use eight byte registers. */ +#define MIPS_REGSIZE 8 + +/* define 8 byte register type */ +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_double \ + : ((N) == 32 /*SR*/) ? builtin_type_uint32 \ + : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \ + : builtin_type_long_long) + +/* Load double words in CALL_DUMMY. */ +#define OP_LDFPR 065 /* ldc1 */ +#define OP_LDGPR 067 /* ld */ + +#if defined(MIPS_EABI) && (MIPS_EABI != 0) +/* Define sizes for 64-bit data types, allow specific targets to override + these values. Doing so may violate the strict EABI, but it's necessary + for some MIPS III and MIPS IV machines that want 64bit longs, but 32bit + pointers. */ +#ifndef TARGET_LONG_BIT +#define TARGET_LONG_BIT 64 +#endif +#ifndef TARGET_LONG_LONG_BIT +#define TARGET_LONG_LONG_BIT 64 +#endif +#ifndef TARGET_PTR_BIT +#define TARGET_PTR_BIT 64 +#endif +#endif /* MIPS_EABI */ + +/* Get the basic MIPS definitions. */ +#include "tm-mips.h" diff --git a/gdb/config/mips/tm-mipsm3.h b/gdb/config/mips/tm-mipsm3.h new file mode 100644 index 0000000..f736604 --- /dev/null +++ b/gdb/config/mips/tm-mipsm3.h @@ -0,0 +1,66 @@ +/* Definitions to make GDB run on a mips box under Mach 3.0 + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Mach specific definitions for little endian mips (e.g. pmax) + * running Mach 3.0 + * + * Author: Jukka Virtanen <jtv@hut.fi> + */ + +/* Include common definitions for Mach3 systems */ +#include "nm-m3.h" + +/* Define offsets to access CPROC stack when it does not have + * a kernel thread. + */ + +/* From mk/user/threads/mips/csw.s */ +#define SAVED_FP (12*4) +#define SAVED_PC (13*4) +#define SAVED_BYTES (14*4) + +/* Using these, define our offsets to items strored in + * cproc_switch in csw.s + */ +#define MACHINE_CPROC_SP_OFFSET SAVED_BYTES +#define MACHINE_CPROC_PC_OFFSET SAVED_PC +#define MACHINE_CPROC_FP_OFFSET SAVED_FP + +/* Thread flavors used in setting the Trace state. + * + * In <mach/machine/thread_status.h> + */ +#define TRACE_FLAVOR MIPS_EXC_STATE +#define TRACE_FLAVOR_SIZE MIPS_EXC_STATE_COUNT +#define TRACE_SET(x,state) ((struct mips_exc_state *)state)->cause = EXC_SST; +#define TRACE_CLEAR(x,state) 0 + +/* Mach supports attach/detach */ +#define ATTACH_DETACH 1 + +#include "mips/tm-mips.h" + +/* Address of end of user stack space. + * for MACH, see <machine/vmparam.h> + */ +#undef STACK_END_ADDR +#define STACK_END_ADDR USRSTACK + +/* Output registers in tabular format */ +#define TABULAR_REGISTER_OUTPUT diff --git a/gdb/config/mips/tm-mipsv4.h b/gdb/config/mips/tm-mipsv4.h new file mode 100644 index 0000000..dd7aaa1 --- /dev/null +++ b/gdb/config/mips/tm-mipsv4.h @@ -0,0 +1,45 @@ +/* Target machine description for MIPS running SVR4, for GDB. + Copyright 1994, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "mips/tm-bigmips.h" +#include "tm-sysv4.h" + +/* When calling functions on a MIPS SVR4 ABI compliant platform + $25 must hold the function address. Dest_Reg is a macro + used in CALL_DUMMY in tm-mips.h. */ +#undef Dest_Reg +#define Dest_Reg 25 + +/* The signal handler trampoline is called _sigtramp. */ +#undef IN_SIGTRAMP +#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigtramp", name)) + +/* On entry to the signal handler trampoline, an ucontext is already + pushed on the stack. We can get at the saved registers via the + mcontext which is contained within the ucontext. */ +#define SIGFRAME_BASE 0 +#define SIGFRAME_REGSAVE_OFF (SIGFRAME_BASE + 40) +#define SIGFRAME_PC_OFF (SIGFRAME_BASE + 40 + 35 * 4) +#define SIGFRAME_FPREGSAVE_OFF (SIGFRAME_BASE + 40 + 36 * 4) + +/* Use the alternate method of determining valid frame chains. */ +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +/* Convert a DWARF register number to a gdb REGNUM. */ +#define DWARF_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-32) diff --git a/gdb/config/mips/tm-tx39.h b/gdb/config/mips/tm-tx39.h new file mode 100644 index 0000000..ee99a28 --- /dev/null +++ b/gdb/config/mips/tm-tx39.h @@ -0,0 +1,39 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define MIPS_EABI 1 +#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE + +#include "mips/tm-bigmips.h" + +#undef REGISTER_NAMES +#define REGISTER_NAMES \ + { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \ + "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \ + "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \ + "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", \ + "sr", "lo", "hi", "bad", "cause","pc", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "config", "cache", "debug", "depc", "epc", "" \ + } diff --git a/gdb/config/mips/tm-tx39l.h b/gdb/config/mips/tm-tx39l.h new file mode 100644 index 0000000..8ceec72 --- /dev/null +++ b/gdb/config/mips/tm-tx39l.h @@ -0,0 +1,39 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define MIPS_EABI 1 +#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE + +#include "mips/tm-mips.h" + +#undef REGISTER_NAMES +#define REGISTER_NAMES \ + { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \ + "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \ + "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \ + "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", \ + "sr", "lo", "hi", "bad", "cause","pc", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "config", "cache", "debug", "depc", "epc", "" \ + } diff --git a/gdb/config/mips/tm-vr4100.h b/gdb/config/mips/tm-vr4100.h new file mode 100644 index 0000000..843f49c --- /dev/null +++ b/gdb/config/mips/tm-vr4100.h @@ -0,0 +1,25 @@ +/* Copyright (C) 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define MIPS_EABI 1 +#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE +#define TARGET_MONITOR_PROMPT "<RISQ> " +#define TARGET_PTR_BIT 64 + +#include "mips/tm-bigmips64.h" diff --git a/gdb/config/mips/tm-vr4300.h b/gdb/config/mips/tm-vr4300.h new file mode 100644 index 0000000..541ca44 --- /dev/null +++ b/gdb/config/mips/tm-vr4300.h @@ -0,0 +1,22 @@ +/* Copyright (C) 1993, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define TARGET_MONITOR_PROMPT "<RISQ> " + +#include "mips/tm-bigmips64.h" diff --git a/gdb/config/mips/tm-vr4300el.h b/gdb/config/mips/tm-vr4300el.h new file mode 100644 index 0000000..75e8693 --- /dev/null +++ b/gdb/config/mips/tm-vr4300el.h @@ -0,0 +1,22 @@ +/* Copyright (C) 1993, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define TARGET_MONITOR_PROMPT "<RISQ> " + +#include "mips/tm-mips64.h" diff --git a/gdb/config/mips/tm-vr5000.h b/gdb/config/mips/tm-vr5000.h new file mode 100644 index 0000000..b834a77 --- /dev/null +++ b/gdb/config/mips/tm-vr5000.h @@ -0,0 +1,23 @@ +/* Copyright (C) 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define TARGET_MONITOR_PROMPT "<RISQ> " +#define MIPS_EABI 1 + +#include "mips/tm-bigmips64.h" diff --git a/gdb/config/mips/tm-vr5000el.h b/gdb/config/mips/tm-vr5000el.h new file mode 100644 index 0000000..c6897d1 --- /dev/null +++ b/gdb/config/mips/tm-vr5000el.h @@ -0,0 +1,23 @@ +/* Copyright (C) 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 +#define TARGET_MONITOR_PROMPT "<RISQ> " +#define MIPS_EABI 1 + +#include "mips/tm-mips64.h" diff --git a/gdb/config/mips/tm-vxmips.h b/gdb/config/mips/tm-vxmips.h new file mode 100644 index 0000000..392a929 --- /dev/null +++ b/gdb/config/mips/tm-vxmips.h @@ -0,0 +1,31 @@ +/* Target machine description for VxWorks MIPS's, for GDB, the GNU debugger. + Copyright 1996 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".vxgdbinit" + +#define DEFAULT_PROMPT "(vxgdb) " + +#include "mips/tm-mips.h" + +/* FIXME: These are almost certainly wrong. */ + +/* Number of registers in a ptrace_getregs call. */ + +#define VX_NUM_REGS (NUM_REGS) diff --git a/gdb/config/mips/tx39.mt b/gdb/config/mips/tx39.mt new file mode 100644 index 0000000..8b4c1a9 --- /dev/null +++ b/gdb/config/mips/tx39.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o dve3900-rom.o monitor.o dsrec.o +TM_FILE= tm-tx39.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/tx39l.mt b/gdb/config/mips/tx39l.mt new file mode 100644 index 0000000..3508329 --- /dev/null +++ b/gdb/config/mips/tx39l.mt @@ -0,0 +1,5 @@ +# Target: Big-endian mips board, typically an IDT. +TDEPFILES= mips-tdep.o remote-mips.o dve3900-rom.o monitor.o dsrec.o +TM_FILE= tm-tx39l.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/vr4100.mt b/gdb/config/mips/vr4100.mt new file mode 100644 index 0000000..c5ae4f9 --- /dev/null +++ b/gdb/config/mips/vr4100.mt @@ -0,0 +1,5 @@ +# Target: Big-endian SIM monitor board. +TDEPFILES= mips-tdep.o remote-mips.o +TM_FILE= tm-vr4100.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/vr4300.mt b/gdb/config/mips/vr4300.mt new file mode 100644 index 0000000..22cb25e --- /dev/null +++ b/gdb/config/mips/vr4300.mt @@ -0,0 +1,5 @@ +# Target: Big-endian SIM monitor board. +TDEPFILES= mips-tdep.o remote-mips.o +TM_FILE= tm-vr4300.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/vr4300el.mt b/gdb/config/mips/vr4300el.mt new file mode 100644 index 0000000..cff7241 --- /dev/null +++ b/gdb/config/mips/vr4300el.mt @@ -0,0 +1,5 @@ +# Target: Little-endian SIM monitor board. +TDEPFILES= mips-tdep.o remote-mips.o +TM_FILE= tm-vr4300el.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/vr5000.mt b/gdb/config/mips/vr5000.mt new file mode 100644 index 0000000..316c548 --- /dev/null +++ b/gdb/config/mips/vr5000.mt @@ -0,0 +1,7 @@ +# Target: Big-endian SIM monitor board. +TDEPFILES= mips-tdep.o remote-mips.o +TM_FILE= tm-vr5000.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a +GDBSERVER_DEPFILES= low-sim.o +GDBSERVER_LIBS = ../../sim/mips/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a -lm diff --git a/gdb/config/mips/vr5000el.mt b/gdb/config/mips/vr5000el.mt new file mode 100644 index 0000000..99687ed --- /dev/null +++ b/gdb/config/mips/vr5000el.mt @@ -0,0 +1,5 @@ +# Target: Little-endian SIM monitor board. +TDEPFILES= mips-tdep.o remote-mips.o +TM_FILE= tm-vr5000el.h +SIM_OBS = remote-sim.o +SIM = ../sim/mips/libsim.a diff --git a/gdb/config/mips/vxmips.mt b/gdb/config/mips/vxmips.mt new file mode 100644 index 0000000..a20cf96 --- /dev/null +++ b/gdb/config/mips/vxmips.mt @@ -0,0 +1,3 @@ +# Target: MIPS running VxWorks +TDEPFILES= mips-tdep.o remote-vx.o remote-vxmips.o xdr_ld.o xdr_ptrace.o xdr_rdb.o +TM_FILE= tm-vxmips.h diff --git a/gdb/config/mips/xm-irix3.h b/gdb/config/mips/xm-irix3.h new file mode 100644 index 0000000..d096594 --- /dev/null +++ b/gdb/config/mips/xm-irix3.h @@ -0,0 +1,31 @@ +/* Copyright (C) 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is for the iris. */ + +#define HAVE_TERMIO + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Override register locations in upage for SGI machines */ +#undef REGISTER_U_ADDR +#define REGISTER_U_ADDR(addr, blockend, regno) \ + if (regno < PC_REGNUM) \ + addr = regno; \ + else \ + addr = regno + NSIG_HNDLRS; /* Skip over signal handlers */ diff --git a/gdb/config/mips/xm-irix4.h b/gdb/config/mips/xm-irix4.h new file mode 100644 index 0000000..14d21f0 --- /dev/null +++ b/gdb/config/mips/xm-irix4.h @@ -0,0 +1,33 @@ +/* Definitions for irix4 hosting support. + +Copyright (C) 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is for the iris. */ + +#include "mips/xm-irix3.h" + +#define BROKEN_SIGINFO_H /* <sys/siginfo.h> si_pid & si_uid are bogus */ + +/* Irix 4.0.1 and later have termios. Not sure about earlier versions. */ +#undef HAVE_TERMIO +#define HAVE_TERMIOS + +/* This enables reliable signals (and the associated setjmp/longjmp), and gives + bsdish prototypes for getpgrp/setpgrg/setgroups and initgroups. */ +#define _BSD_COMPAT diff --git a/gdb/config/mips/xm-irix5.h b/gdb/config/mips/xm-irix5.h new file mode 100644 index 0000000..a64277b --- /dev/null +++ b/gdb/config/mips/xm-irix5.h @@ -0,0 +1,35 @@ +/* Definitions for irix5 hosting support. + +Copyright (C) 1993, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "xm-sysv4.h" + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Override register locations in upage for SGI machines */ +#undef REGISTER_U_ADDR +#define REGISTER_U_ADDR(addr, blockend, regno) \ + if (regno < PC_REGNUM) \ + addr = regno; \ + else \ + addr = regno + NSIG_HNDLRS; /* Skip over signal handlers */ + +/* This enables reliable signals (and the associated setjmp/longjmp), and gives + bsdish prototypes for getpgrp/setpgrg/setgroups and initgroups. */ +#define _BSD_COMPAT diff --git a/gdb/config/mips/xm-mips.h b/gdb/config/mips/xm-mips.h new file mode 100644 index 0000000..a2e9a50 --- /dev/null +++ b/gdb/config/mips/xm-mips.h @@ -0,0 +1,61 @@ +/* Definitions to make GDB run on a mips box under 4.3bsd. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin(af@cs.cmu.edu) at CMU + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#endif + +#ifdef ultrix +/* Needed for DECstation core files. */ +#include <machine/param.h> +#define KERNEL_U_ADDR UADDR + +/* Native Ultrix cc has broken long long support. */ +#ifndef __GNUC__ +#undef CC_HAS_LONG_LONG +#endif +#endif + +#if ! defined (__STDC__) && ! defined (offsetof) +# define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER) +#endif + +/* Only used for core files on DECstations. + First four registers at u.u_ar0 are saved arguments, and + there is no r0 saved. Float registers are saved + in u_pcb.pcb_fpregs, not relative to u.u_ar0. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + { \ + if (regno < FP0_REGNUM) \ + addr = blockend + sizeof(int) * (4 + regno - 1); \ + else \ + addr = offsetof (struct user, u_pcb.pcb_fpregs[0]) + \ + sizeof (int) * (regno - FP0_REGNUM); \ + } + +/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */ +#define ONE_PROCESS_WRITETEXT + +/* HAVE_SGTTY also works, last we tried. + + But we have termios, at least as of Ultrix 4.2A, so use it. */ +#define HAVE_TERMIOS diff --git a/gdb/config/mips/xm-mipsm3.h b/gdb/config/mips/xm-mipsm3.h new file mode 100644 index 0000000..6a5a73c --- /dev/null +++ b/gdb/config/mips/xm-mipsm3.h @@ -0,0 +1,32 @@ +/* Definitions to make GDB run on a mips box under 4.3bsd. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin(af@cs.cmu.edu) at CMU + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#endif + +#define KERNEL_U_ADDR 0 /* Not needed. */ + +/* Only used for core files on DECstations. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + if (regno < 38) addr = (NBPG*UPAGES) + (regno - 38)*sizeof(int);\ + else addr = 0; /* ..somewhere in the pcb */ diff --git a/gdb/config/mips/xm-mipsv4.h b/gdb/config/mips/xm-mipsv4.h new file mode 100644 index 0000000..d80ba43 --- /dev/null +++ b/gdb/config/mips/xm-mipsv4.h @@ -0,0 +1,23 @@ +/* Definitions for MIPS running SVR4 hosting support. + +Copyright (C) 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "xm-sysv4.h" + +#define HOST_BYTE_ORDER BIG_ENDIAN diff --git a/gdb/config/mips/xm-news-mips.h b/gdb/config/mips/xm-news-mips.h new file mode 100644 index 0000000..06aac1a --- /dev/null +++ b/gdb/config/mips/xm-news-mips.h @@ -0,0 +1,24 @@ +/* Definitions to make GDB run on a mips box under 4.3bsd. + Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. + Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin + and by Alessandro Forin(af@cs.cmu.edu) at CMU + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER BIG_ENDIAN +#endif diff --git a/gdb/config/mips/xm-riscos.h b/gdb/config/mips/xm-riscos.h new file mode 100644 index 0000000..467f32a --- /dev/null +++ b/gdb/config/mips/xm-riscos.h @@ -0,0 +1,28 @@ +/* Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HAVE_TERMIO + +#if !defined (HOST_BYTE_ORDER) +#define HOST_BYTE_ORDER BIG_ENDIAN +#endif + +#define USG 1 + +/* setjmp.h requires uid_t. */ +#include <sys/types.h> diff --git a/gdb/config/mn10200/mn10200.mt b/gdb/config/mn10200/mn10200.mt new file mode 100644 index 0000000..c85a2fb --- /dev/null +++ b/gdb/config/mn10200/mn10200.mt @@ -0,0 +1,6 @@ +# Target: Matsushita mn10200 +TDEPFILES= mn10200-tdep.o +TM_FILE= tm-mn10200.h + +SIM_OBS = remote-sim.o +SIM = ../sim/mn10200/libsim.a diff --git a/gdb/config/mn10200/tm-mn10200.h b/gdb/config/mn10200/tm-mn10200.h new file mode 100644 index 0000000..671b534 --- /dev/null +++ b/gdb/config/mn10200/tm-mn10200.h @@ -0,0 +1,212 @@ +/* Parameters for execution on a Matsushita mn10200 processor. + Copyright 1997 Free Software Foundation, Inc. + + Contributed by Geoffrey Noer <noer@cygnus.com> + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The mn10200 is little endian. */ +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* ints are only 16bits on the mn10200. */ +#undef TARGET_INT_BIT +#define TARGET_INT_BIT 16 + +/* The mn10200 doesn't support long long types. */ +#undef TARGET_LONG_LONG_BIT +#define TARGET_LONG_LONG_BIT 32 + +/* The mn10200 doesn't support double or long double either. */ +#undef TARGET_DOUBLE_BIT +#undef TARGET_LONG_DOUBLE_BIT +#define TARGET_DOUBLE_BIT 32 +#define TARGET_LONG_DOUBLE_BIT 32 + +/* Not strictly correct, but the machine independent code is not + ready to handle any of the basic sizes not being a power of two. */ +#undef TARGET_PTR_BIT +#define TARGET_PTR_BIT 32 + +/* The mn10200 really has 24 bit registers but the simulator reads/writes + them as 32bit values, so we claim they're 32bits each. This may have + to be tweaked if the Matsushita emulator/board really deals with them + as 24bits each. */ +#define REGISTER_SIZE 4 + +#define MAX_REGISTER_RAW_SIZE REGISTER_SIZE +#define NUM_REGS 11 + +#define REGISTER_BYTES (NUM_REGS * REGISTER_SIZE) + +#define REGISTER_NAMES \ +{ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "sp", \ + "pc", "mdr", "psw"} + +#define FP_REGNUM 6 +#define SP_REGNUM 7 +#define PC_REGNUM 8 +#define MDR_REGNUM 9 +#define PSW_REGNUM 10 + +/* Treat the registers as 32bit values. */ +#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_long + +#define REGISTER_BYTE(REG) ((REG) * REGISTER_SIZE) +#define REGISTER_VIRTUAL_SIZE(REG) REGISTER_SIZE +#define REGISTER_RAW_SIZE(REG) REGISTER_SIZE + +#define MAX_REGISTER_VIRTUAL_SIZE REGISTER_SIZE + +/* The breakpoint instruction must be the same size as te smallest + instruction in the instruction set. + + The Matsushita mn10x00 processors have single byte instructions + so we need a single byte breakpoint. Matsushita hasn't defined + one, so we defined it ourselves. + + 0xff is the only available single byte insn left on the mn10200. */ +#define BREAKPOINT {0xff} + +#define FUNCTION_START_OFFSET 0 + +#define DECR_PC_AFTER_BREAK 0 + +/* Stacks grow the normal way. */ +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define SAVED_PC_AFTER_CALL(frame) \ + (read_memory_integer (read_register (SP_REGNUM), REGISTER_SIZE) & 0xffffff) + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +#define EXTRA_FRAME_INFO struct frame_saved_regs fsr; int status; int stack_size; + +extern void mn10200_init_extra_frame_info PARAMS ((struct frame_info *)); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) mn10200_init_extra_frame_info (fi) +#define INIT_FRAME_PC(x,y) + +extern void mn10200_frame_find_saved_regs PARAMS ((struct frame_info *, + struct frame_saved_regs *)); +#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr + +extern CORE_ADDR mn10200_frame_chain PARAMS ((struct frame_info *)); +#define FRAME_CHAIN(fi) mn10200_frame_chain (fi) +#define FRAME_CHAIN_VALID(FP, FI) generic_frame_chain_valid (FP, FI) + +extern CORE_ADDR mn10200_find_callers_reg PARAMS ((struct frame_info *, int)); +extern CORE_ADDR mn10200_frame_saved_pc PARAMS ((struct frame_info *)); +#define FRAME_SAVED_PC(FI) (mn10200_frame_saved_pc (FI)) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \ + { \ + if (TYPE_LENGTH (TYPE) > 8) \ + abort (); \ + else if (TYPE_LENGTH (TYPE) > 2 && TYPE_CODE (TYPE) != TYPE_CODE_PTR) \ + { \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), 2); \ + memcpy (VALBUF + 2, REGBUF + REGISTER_BYTE (1), 2); \ + } \ + else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)\ + { \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (4), TYPE_LENGTH (TYPE)); \ + } \ + else \ + { \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), TYPE_LENGTH (TYPE)); \ + } \ + } + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (4), \ + REGISTER_RAW_SIZE (4)) + +#define STORE_RETURN_VALUE(TYPE, VALBUF) \ + { \ + if (TYPE_LENGTH (TYPE) > 8) \ + abort (); \ + else if (TYPE_LENGTH (TYPE) > 2 && TYPE_CODE (TYPE) != TYPE_CODE_PTR) \ + { \ + write_register_bytes (REGISTER_BYTE (0), VALBUF, 2); \ + write_register_bytes (REGISTER_BYTE (1), VALBUF + 2, 2); \ + } \ + else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)\ + { \ + write_register_bytes (REGISTER_BYTE (4), VALBUF, TYPE_LENGTH (TYPE)); \ + } \ + else \ + { \ + write_register_bytes (REGISTER_BYTE (0), VALBUF, TYPE_LENGTH (TYPE)); \ + } \ + } + +#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \ + (SP) = mn10200_store_struct_return (STRUCT_ADDR, SP) + +extern CORE_ADDR mn10200_skip_prologue PARAMS ((CORE_ADDR)); +#define SKIP_PROLOGUE(pc) pc = mn10200_skip_prologue (pc) + +#define FRAME_ARGS_SKIP 0 + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) +#define FRAME_NUM_ARGS(val, fi) ((val) = -1) + +extern void mn10200_pop_frame PARAMS ((struct frame_info *)); +#define POP_FRAME mn10200_pop_frame (get_current_frame ()) + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_ADDRESS() entry_point_address () + +extern CORE_ADDR mn10200_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +#define PUSH_RETURN_ADDRESS(PC, SP) mn10200_push_return_address (PC, SP) + +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +extern CORE_ADDR +mn10200_push_arguments PARAMS ((int, struct value **, CORE_ADDR, + unsigned char, CORE_ADDR)); +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = mn10200_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) + +#define REG_STRUCT_HAS_ADDR(gcc_p,TYPE) \ + (TYPE_LENGTH (TYPE) > 8) + +extern use_struct_convention_fn mn10200_use_struct_convention; +#define USE_STRUCT_CONVENTION(GCC_P, TYPE) mn10200_use_struct_convention (GCC_P, TYPE) + +/* Override the default get_saved_register function with + one that takes account of generic CALL_DUMMY frames. */ +#define GET_SAVED_REGISTER + +/* Define this for Wingdb */ +#define TARGET_MN10200 diff --git a/gdb/config/mn10300/mn10300.mt b/gdb/config/mn10300/mn10300.mt new file mode 100644 index 0000000..fc503bd --- /dev/null +++ b/gdb/config/mn10300/mn10300.mt @@ -0,0 +1,6 @@ +# Target: Matsushita mn10300 +TDEPFILES= mn10300-tdep.o +TM_FILE= tm-mn10300.h + +SIM_OBS = remote-sim.o +SIM = ../sim/mn10300/libsim.a diff --git a/gdb/config/mn10300/tm-mn10300.h b/gdb/config/mn10300/tm-mn10300.h new file mode 100644 index 0000000..e7d3fd7 --- /dev/null +++ b/gdb/config/mn10300/tm-mn10300.h @@ -0,0 +1,165 @@ +/* Parameters for execution on a Matsushita mn10300 processor. + Copyright 1996, 1997 Free Software Foundation, Inc. + + Contributed by Geoffrey Noer <noer@cygnus.com> + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The mn10300 is little endian. */ +#define TARGET_BYTE_ORDER_DEFAULT LITTLE_ENDIAN + +/* All registers are 32bits (phew!). */ +#define REGISTER_SIZE 4 +#define MAX_REGISTER_RAW_SIZE 4 +#define NUM_REGS 32 + +#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int + +#define REGISTER_BYTE(REG) ((REG) * 4) +#define REGISTER_VIRTUAL_SIZE(REG) 4 +#define REGISTER_RAW_SIZE(REG) 4 + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +#define REGISTER_BYTES (NUM_REGS * REGISTER_SIZE) + +extern char **mn10300_register_names; +#define REGISTER_NAME(i) mn10300_register_names[i] + +#define D2_REGNUM 2 +#define D3_REGNUM 3 +#define A2_REGNUM 6 +#define A3_REGNUM 7 +#define SP_REGNUM 8 +#define PC_REGNUM 9 +#define MDR_REGNUM 10 +#define PSW_REGNUM 11 +#define LIR_REGNUM 12 +#define LAR_REGNUM 13 + +/* Pseudo register that contains true address of executing stack frame */ +#define FP_REGNUM 31 + +/* BREAKPOINT_FROM_PC uses the program counter value to determine the + breakpoint that should be used */ +extern breakpoint_from_pc_fn mn10300_breakpoint_from_pc; +#define BREAKPOINT_FROM_PC(pcptr, lenptr) mn10300_breakpoint_from_pc (pcptr, lenptr) + +#define FUNCTION_START_OFFSET 0 + +#define DECR_PC_AFTER_BREAK 0 + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define SAVED_PC_AFTER_CALL(frame) \ + read_memory_integer (read_register (SP_REGNUM), 4) + +#ifdef __STDC__ +struct frame_info; +struct type; +struct value; +#endif + +extern void mn10300_init_extra_frame_info PARAMS ((struct frame_info *)); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) mn10300_init_extra_frame_info (fi) +#define INIT_FRAME_PC /* Not necessary */ + +#define FRAME_INIT_SAVED_REGS(fi) /* handled by init_extra_frame_info */ + +extern CORE_ADDR mn10300_frame_chain PARAMS ((struct frame_info *)); +#define FRAME_CHAIN(fi) mn10300_frame_chain (fi) +#define FRAME_CHAIN_VALID(FP, FI) generic_frame_chain_valid (FP, FI) + +extern CORE_ADDR mn10300_find_callers_reg PARAMS ((struct frame_info *, int)); +extern CORE_ADDR mn10300_frame_saved_pc PARAMS ((struct frame_info *)); +#define FRAME_SAVED_PC(FI) (mn10300_frame_saved_pc (FI)) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (4), TYPE_LENGTH (TYPE)); \ + else \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), TYPE_LENGTH (TYPE)); + + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (4), \ + REGISTER_RAW_SIZE (4)) + +#define STORE_RETURN_VALUE(TYPE, VALBUF) \ + if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \ + write_register_bytes(REGISTER_BYTE (4), VALBUF, TYPE_LENGTH (TYPE)); \ + else \ + write_register_bytes(REGISTER_BYTE (0), VALBUF, TYPE_LENGTH (TYPE)); + +#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \ + (SP) = mn10300_store_struct_return (STRUCT_ADDR, SP) + +extern CORE_ADDR mn10300_skip_prologue PARAMS ((CORE_ADDR)); +#define SKIP_PROLOGUE(pc) pc = mn10300_skip_prologue (pc) + +#define FRAME_ARGS_SKIP 0 + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) +#define FRAME_NUM_ARGS(val, fi) ((val) = -1) + +extern void mn10300_pop_frame PARAMS ((struct frame_info *)); +#define POP_FRAME mn10300_pop_frame (get_current_frame ()) + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_ADDRESS() entry_point_address () + +extern CORE_ADDR mn10300_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +#define PUSH_RETURN_ADDRESS(PC, SP) mn10300_push_return_address (PC, SP) + +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +extern CORE_ADDR +mn10300_push_arguments PARAMS ((int, struct value **, CORE_ADDR, + unsigned char, CORE_ADDR )); +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = mn10300_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) + +#define REG_STRUCT_HAS_ADDR(gcc_p,TYPE) \ + (TYPE_LENGTH (TYPE) > 8) + +extern use_struct_convention_fn mn10300_use_struct_convention; +#define USE_STRUCT_CONVENTION(GCC_P, TYPE) mn10300_use_struct_convention (GCC_P, TYPE) + +/* override the default get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + +/* Cons up virtual frame pointer for trace */ +extern void mn10300_virtual_frame_pointer PARAMS ((CORE_ADDR, long *, long *)); +#define TARGET_VIRTUAL_FRAME_POINTER(PC, REGP, OFFP) \ + mn10300_virtual_frame_pointer ((PC), (REGP), (OFFP)) + +/* Define this for Wingdb */ + +#define TARGET_MN10300 diff --git a/gdb/config/nm-empty.h b/gdb/config/nm-empty.h new file mode 100644 index 0000000..7069d8c --- /dev/null +++ b/gdb/config/nm-empty.h @@ -0,0 +1,2 @@ +/* This is just a dummy file to symlink to when GDB is configured as a + cross-only debugger. */ diff --git a/gdb/config/nm-gnu.h b/gdb/config/nm-gnu.h new file mode 100644 index 0000000..b7ee4dc --- /dev/null +++ b/gdb/config/nm-gnu.h @@ -0,0 +1,45 @@ +/* Common declarations for the GNU Hurd + + Copyright (C) 1995, 1998 Free Software Foundation, Inc. + + Written by Miles Bader <miles@gnu.ai.mit.edu> + + The GNU Hurd is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2, or (at + your option) any later version. + + The GNU Hurd is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef __NM_GNU_H__ +#define __NM_GNU_H__ + +#include <unistd.h> +#include <mach.h> +#include <mach/exception.h> + +#undef target_pid_to_str +#define target_pid_to_str(pid) gnu_target_pid_to_str(pid) +extern char *gnu_target_pid_to_str (int pid); + +/* Before storing, we need to read all the registers. */ +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Don't do wait_for_inferior on attach. */ +#define ATTACH_NO_WAIT + +/* Use SVR4 style shared library support */ +#define SVR4_SHARED_LIBS +#include "solib.h" +#define NO_CORE_OPS + +#define MAINTENANCE_CMDS 1 + +#endif /* __NM_GNU_H__ */ diff --git a/gdb/config/nm-lynx.h b/gdb/config/nm-lynx.h new file mode 100644 index 0000000..2daf0fa --- /dev/null +++ b/gdb/config/nm-lynx.h @@ -0,0 +1,83 @@ +/* Native-dependent definitions for LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_LYNX_H +#define NM_LYNX_H + +#include <sys/conf.h> +#include <sys/kernel.h> +/* sys/kernel.h should define this, but doesn't always, sigh. */ +#ifndef __LYNXOS +#define __LYNXOS +#endif +#include <sys/mem.h> +#include <sys/signal.h> +#include <sys/time.h> +#include <sys/resource.h> +#include <sys/itimer.h> +#include <sys/file.h> +#include <sys/proc.h> +#include "gdbthread.h" + +/* This is the amount to subtract from u.u_ar0 to get the offset in + the core file of the register values. */ + +#define KERNEL_U_ADDR USRSTACK + +#undef FLOAT_INFO /* No float info yet */ + +/* As of LynxOS 2.2.2 (beta 8/15/94), this is int. Previous versions seem to + have had no prototype, so I'm not sure why GDB used to define this to + char *. */ +#define PTRACE_ARG3_TYPE int + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* Thread ID of stopped thread. */ + +#define WIFTID(x) (((union wait *)&x)->w_tid) + +/* Override child_wait in inftarg.c */ + +#define CHILD_WAIT + +/* Override child_resume in infptrace.c */ + +#define CHILD_RESUME + +/* Override child_thread_alive in intarg.c */ + +#define CHILD_THREAD_ALIVE + +#include "target.h" + +extern int child_wait PARAMS ((int pid, struct target_waitstatus *status)); + +/* Lynx needs a special definition of this so that we can + print out the pid and thread number seperatly. */ + +#undef target_pid_to_str + +#define target_pid_to_str(PID) lynx_pid_to_str (PID) + +extern char *lynx_pid_to_str PARAMS ((int pid)); + +#endif /* NM_LYNX_H */ diff --git a/gdb/config/nm-m3.h b/gdb/config/nm-m3.h new file mode 100644 index 0000000..6ea5256 --- /dev/null +++ b/gdb/config/nm-m3.h @@ -0,0 +1,123 @@ +/* Mach 3.0 common definitions and global vars. + + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_M3_H +#define NM_M3_H + +#include <mach.h> + +/* Mach3 doesn't declare errno in <errno.h>. */ +extern int errno; + +/* Task port of our debugged inferior. */ + +extern task_t inferior_task; + +/* Thread port of the current thread in the inferior. */ + +extern thread_t current_thread; + +/* If nonzero, we must suspend/abort && resume threads + * when setting or getting the state. + */ +extern int must_suspend_thread; + +#define PREPARE_TO_PROCEED(select_it) mach3_prepare_to_proceed(select_it) + +/* Try to get the privileged host port for authentication to machid + * + * If you can get this, you may debug anything on this host. + * + * If you can't, gdb gives it's own task port as the + * authentication port + */ +#define mach_privileged_host_port() task_by_pid(-1) + +/* + * This is the MIG ID number of the emulator/server bsd_execve() RPC call. + * + * It SHOULD never change, but if it does, gdb `run' + * command won't work until you fix this define. + * + */ +#define MIG_EXEC_SYSCALL_ID 101000 + +/* If our_message_port gets a msg with this ID, + * GDB suspends it's inferior and enters command level. + * (Useful at least if ^C does not work) + */ +#define GDB_MESSAGE_ID_STOP 0x41151 + +/* wait3 WNOHANG is defined in <sys/wait.h> but + * for some reason gdb does not want to include + * that file. + * + * If your system defines WNOHANG differently, this has to be changed. + */ +#define WNOHANG 1 + +/* Before storing, we need to read all the registers. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Check if the inferior exists */ +#define MACH_ERROR_NO_INFERIOR \ + do if (!MACH_PORT_VALID (inferior_task)) \ + error ("Inferior task does not exist."); while(0) + +/* Error handler for mach calls */ +#define CHK(str,ret) \ + do if (ret != KERN_SUCCESS) \ + error ("Gdb %s [%d] %s : %s\n",__FILE__,__LINE__,str, \ + mach_error_string(ret)); while(0) + +/* This is from POE9 emulator/emul_stack.h + */ +/* + * Top of emulator stack holds link and reply port. + */ +struct emul_stack_top { + struct emul_stack_top *link; + mach_port_t reply_port; +}; + +#define EMULATOR_STACK_SIZE (4096*4) + +#define THREAD_ALLOWED_TO_BREAK(mid) mach_thread_for_breakpoint (mid) + +#define THREAD_PARSE_ID(arg) mach_thread_parse_id (arg) + +#define THREAD_OUTPUT_ID(mid) mach_thread_output_id (mid) + +#define ATTACH_TO_THREAD attach_to_thread + +/* Don't do wait_for_inferior on attach. */ +#define ATTACH_NO_WAIT + +/* Do Mach 3 dependent operations when ^C or a STOP is requested */ +#define DO_QUIT() mach3_quit () + +#if 0 +/* This is bogus. It is NOT OK to quit out of target_wait. */ +/* If in mach_msg() and ^C is typed set immediate_quit */ +#define REQUEST_QUIT() mach3_request_quit () +#endif + +#endif /* NM_M3_H */ diff --git a/gdb/config/nm-nbsd.h b/gdb/config/nm-nbsd.h new file mode 100644 index 0000000..bc1d6a6 --- /dev/null +++ b/gdb/config/nm-nbsd.h @@ -0,0 +1,86 @@ +/* Native-dependent definitions for NetBSD. + Copyright 1994, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#include <machine/vmparam.h> + +#define KERNEL_U_ADDR USRSTACK + +#define PTRACE_ARG3_TYPE char* + +#define FETCH_INFERIOR_REGISTERS + +#define ATTACH_DETACH + +#include "solib.h" /* Support for shared libraries. */ + +/* make structure definitions match up with those expected in solib.c */ +#define link_object sod +#define lo_name sod_name +#define lo_library sod_library +#define lo_unused sod_reserved +#define lo_major sod_major +#define lo_minor sod_minor +#define lo_next sod_next + +#define link_map so_map +#define lm_addr som_addr +#define lm_name som_path +#define lm_next som_next +#define lm_lop som_sod +#define lm_lob som_sodbase +#define lm_rwt som_write +#define lm_ld som_dynamic +#define lm_lpd som_spd + +#define link_dynamic_2 section_dispatch_table +#define ld_loaded sdt_loaded +#define ld_need sdt_sods +#define ld_rules sdt_filler1 +#define ld_got sdt_got +#define ld_plt sdt_plt +#define ld_rel sdt_rel +#define ld_hash sdt_hash +#define ld_stab sdt_nzlist +#define ld_stab_hash sdt_filler2 +#define ld_buckets sdt_buckets +#define ld_symbols sdt_strings +#define ld_symb_size sdt_str_sz +#define ld_text sdt_text_sz +#define ld_plt_sz sdt_plt_sz + +#define rtc_symb rt_symbol +#define rtc_sp rt_sp +#define rtc_next rt_next + +#define ld_debug so_debug +#define ldd_version dd_version +#define ldd_in_debugger dd_in_debugger +#define ldd_sym_loaded dd_sym_loaded +#define ldd_bp_addr dd_bpt_addr +#define ldd_bp_inst dd_bpt_shadow +#define ldd_cp dd_cc + +#define link_dynamic _dynamic +#define ld_version d_version +#define ldd d_debug +#define ld_un d_un +#define ld_2 d_sdt diff --git a/gdb/config/nm-sysv4.h b/gdb/config/nm-sysv4.h new file mode 100644 index 0000000..b891d4d --- /dev/null +++ b/gdb/config/nm-sysv4.h @@ -0,0 +1,33 @@ +/* Definitions for running gdb on a host machine running any flavor of SVR4. + Copyright 1991, 1992, 1998 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Use SVR4 style shared library support */ + +#define SVR4_SHARED_LIBS +#include "solib.h" + +/* SVR4 has /proc support, so use it instead of ptrace. */ + +#define USE_PROC_FS + +/* SVR4 machines can easily do attach and detach via /proc (procfs.c) + support */ + +#define ATTACH_DETACH diff --git a/gdb/config/none/nm-none.h b/gdb/config/none/nm-none.h new file mode 100644 index 0000000..9d630f3 --- /dev/null +++ b/gdb/config/none/nm-none.h @@ -0,0 +1,18 @@ +/* Defines needed when configuring for "none". + Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ diff --git a/gdb/config/none/none.mh b/gdb/config/none/none.mh new file mode 100644 index 0000000..33d5e4a --- /dev/null +++ b/gdb/config/none/none.mh @@ -0,0 +1,5 @@ +# Host: "no target". This can be used to build you +# a Makefile that only runs administrative commands like 'clean', +# 'gdb.tar.Z', etc. +NAT_FILE= nm-none.h +XM_FILE= xm-none.h diff --git a/gdb/config/none/none.mt b/gdb/config/none/none.mt new file mode 100644 index 0000000..300e2dc --- /dev/null +++ b/gdb/config/none/none.mt @@ -0,0 +1,4 @@ +# Target: "no target". +# This can be used to build you a Makefile that only runs administrative +# commands like 'clean', 'gdb.tar.Z', etc. +TM_FILE= tm-none.h diff --git a/gdb/config/none/tm-none.h b/gdb/config/none/tm-none.h new file mode 100644 index 0000000..4b16b3b --- /dev/null +++ b/gdb/config/none/tm-none.h @@ -0,0 +1,23 @@ +/* Defines needed when configuring for "none". + Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This define is needed so that "gcc -MM" doesn't get errors and fail on + source files that use the value of INNER_THAN in preprocessor lines. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) diff --git a/gdb/config/none/xm-none.h b/gdb/config/none/xm-none.h new file mode 100644 index 0000000..9d630f3 --- /dev/null +++ b/gdb/config/none/xm-none.h @@ -0,0 +1,18 @@ +/* Defines needed when configuring for "none". + Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ diff --git a/gdb/config/ns32k/merlin.mh b/gdb/config/ns32k/merlin.mh new file mode 100644 index 0000000..f9c3e7b --- /dev/null +++ b/gdb/config/ns32k/merlin.mh @@ -0,0 +1,16 @@ +# Host: Merlin running utek 2.1 +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o +XM_FILE= xm-merlin.h + +# FIXME: M_INSTALL is gone from the gdb makefile. If anyone cares +# about the Merlin anymore, and the bug which inspired +# SHELL_FILE/gdb-sh is still there, will need to reinstate it. Also, +# this should be done for native only. + +# See SHELL_FILE in xm-merlin.h for a explanation of this. + +# FIXME: This should use $prefix, but only if SHELL_FILE does too. + +M_INSTALL=cp /bin/sh /usr/local/lib/gdb-sh; \ +chmod ogu+rw /usr/local/lib/gdb-sh +M_UNINSTALL = rm -f /usr/local/lib/gdb-sh diff --git a/gdb/config/ns32k/merlin.mt b/gdb/config/ns32k/merlin.mt new file mode 100644 index 0000000..b346077 --- /dev/null +++ b/gdb/config/ns32k/merlin.mt @@ -0,0 +1,3 @@ +# Target: Merlin running utek 2.1 +TDEPFILES= ns32k-tdep.o +TM_FILE= tm-merlin.h diff --git a/gdb/config/ns32k/nbsd.mh b/gdb/config/ns32k/nbsd.mh new file mode 100644 index 0000000..aae025b --- /dev/null +++ b/gdb/config/ns32k/nbsd.mh @@ -0,0 +1,5 @@ +# Host: PC532 running NetBSD +XDEPFILES= ser-tcp.o +XM_FILE= xm-nbsd.h +NAT_FILE= nm-nbsd.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o ns32knbsd-nat.o diff --git a/gdb/config/ns32k/nbsd.mt b/gdb/config/ns32k/nbsd.mt new file mode 100644 index 0000000..512132a --- /dev/null +++ b/gdb/config/ns32k/nbsd.mt @@ -0,0 +1,3 @@ +# Target: PC532 running NetBSD +TDEPFILES= ns32k-tdep.o solib.o +TM_FILE= tm-nbsd.h diff --git a/gdb/config/ns32k/nm-nbsd.h b/gdb/config/ns32k/nm-nbsd.h new file mode 100644 index 0000000..cef536e --- /dev/null +++ b/gdb/config/ns32k/nm-nbsd.h @@ -0,0 +1,36 @@ +/* Native-dependent definitions for ns32k running NetBSD, for GDB. + Copyright 1986, 1987, 1989, 1992, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_NBSD_H +#define NM_NBSD_H + +/* Get generic NetBSD native definitions. */ +#include "nm-nbsd.h" + +#if 0 +#define FLOAT_INFO { extern ns32k_float_info(); ns32k_float_info(); } +#endif + +#define REGISTER_U_ADDR(addr, blockend, regno) \ + (addr) = ns32k_register_u_addr ((blockend),(regno)); + +extern int +ns32k_register_u_addr PARAMS ((int, int)); + +#endif /* NM_NBSD_H */ diff --git a/gdb/config/ns32k/nm-umax.h b/gdb/config/ns32k/nm-umax.h new file mode 100644 index 0000000..add6e70 --- /dev/null +++ b/gdb/config/ns32k/nm-umax.h @@ -0,0 +1,54 @@ +/* Definitions to make GDB run on an encore under umax 4.2 + Copyright 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands... */ +#define ATTACH_DETACH + +/* Offset of registers within u area. */ +#define U_REGS_OFFSET 0 + +/* called from register_addr() -- blockend not used for now */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ \ + switch (regno) { \ + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: \ + addr = PU_R0 - (regno * sizeof (int)); break; \ + case SP_REGNUM: \ + addr = PU_SP; break; \ + case PC_REGNUM: \ + addr = PU_PC; break; \ + case FP_REGNUM: \ + addr = PU_FP; break; \ + case PS_REGNUM: \ + addr = PU_PSL; break; \ + case FPS_REGNUM: \ + addr = PU_FSR; break; \ + case FP0_REGNUM + 0: case FP0_REGNUM + 1: \ + case FP0_REGNUM + 2: case FP0_REGNUM + 3: \ + case FP0_REGNUM + 4: case FP0_REGNUM + 5: \ + case FP0_REGNUM + 6: case FP0_REGNUM + 7: \ + addr = PU_F0 + (regno - FP0_REGNUM) * sizeof (float); break; \ + case LP0_REGNUM + 0: case LP0_REGNUM + 1: \ + case LP0_REGNUM + 2: case LP0_REGNUM + 3: \ + addr = PU_F0 + (regno - LP0_REGNUM) * sizeof (double); break; \ + default: \ + printf ("bad argument to REGISTER_U_ADDR %d\n", regno); \ + abort (); \ + } \ +} diff --git a/gdb/config/ns32k/ns32km3.mh b/gdb/config/ns32k/ns32km3.mh new file mode 100644 index 0000000..7f0992a --- /dev/null +++ b/gdb/config/ns32k/ns32km3.mh @@ -0,0 +1,7 @@ +# Host: ns32k running Mach3 + +XDEPFILES= +NATDEPFILES= m3-nat.o ns32km3-nat.o fork-child.o corelow.o core-aout.o +NAT_CLIBS= -L/usr/mach/lib -lnetname -lmachid -lmach +XM_FILE= xm-ns32km3.h +NAT_FILE= nm-m3.h diff --git a/gdb/config/ns32k/ns32km3.mt b/gdb/config/ns32k/ns32km3.mt new file mode 100644 index 0000000..9391176 --- /dev/null +++ b/gdb/config/ns32k/ns32km3.mt @@ -0,0 +1,3 @@ +# Target: ns32k with a.out on Mach 3 +TDEPFILES= ns32k-tdep.o +TM_FILE= tm-ns32km3.h diff --git a/gdb/config/ns32k/tm-merlin.h b/gdb/config/ns32k/tm-merlin.h new file mode 100644 index 0000000..f90c5e7 --- /dev/null +++ b/gdb/config/ns32k/tm-merlin.h @@ -0,0 +1,313 @@ +/* Definitions to target GDB to a merlin under utek 2.1 + Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ +{ register int op = read_memory_integer (pc, 1); \ + if (op == 0x82) \ + { op = read_memory_integer (pc+2,1); \ + if ((op & 0x80) == 0) pc += 3; \ + else if ((op & 0xc0) == 0x80) pc += 4; \ + else pc += 6; \ + }} + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + read_memory_integer (read_register (SP_REGNUM), 4) + +/* Address of end of stack space. */ + +#define STACK_END_ADDR (0x800000) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0xf2} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Define this to say that the "svc" insn is followed by + codes in memory saying which kind of system call it is. */ + +#define NS32K_SVC_IMMED_OPERANDS + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 25 + +#define NUM_GENERAL_REGS 8 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "pc", "sp", "fp", "ps", \ + "fsr", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "l0", "l1", "l2", "l3", "l4", \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define AP_REGNUM FP_REGNUM +#define FP_REGNUM 10 /* Contains address of executing stack frame */ +#define SP_REGNUM 9 /* Contains address of top of stack */ +#define PC_REGNUM 8 /* Contains program counter */ +#define PS_REGNUM 11 /* Contains processor status */ +#define FPS_REGNUM 12 /* Floating point status register */ +#define FP0_REGNUM 13 /* Floating point register 0 */ +#define LP0_REGNUM 21 /* Double register 0 (same as FP0) */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES ((NUM_REGS - 4) * sizeof (int) + 4 * sizeof (double)) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \ + LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the 32000, all regs are 4 bytes + except for the doubled floating registers. */ + +#define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4) + +/* Number of bytes of storage in the program's representation + for register N. On the 32000, all regs are 4 bytes + except for the doubled floating registers. */ + +#define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) >= FP0_REGNUM ? \ + ((N) >= LP0_REGNUM ? \ + builtin_type_double \ + : builtin_type_float) \ + : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + On this machine this is a no-op, as gcc doesn't run on it yet. + This calling convention is not used. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the Merlin, the frame's nominal address is the FP value, + and at that address is saved previous FP value as a 4-byte word. */ + +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) + +/* compute base of arguments */ +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) \ +{ CORE_ADDR pc; \ + int insn; \ + int addr_mode; \ + int width; \ + \ + pc = FRAME_SAVED_PC (fi); \ + insn = read_memory_integer (pc,2); \ + addr_mode = (insn >> 11) & 0x1f; \ + insn = insn & 0x7ff; \ + if ((insn & 0x7fc) == 0x57c \ + && addr_mode == 0x14) /* immediate */ \ + { if (insn == 0x57c) /* adjspb */ \ + width = 1; \ + else if (insn == 0x57d) /* adjspw */ \ + width = 2; \ + else if (insn == 0x57f) /* adjspd */ \ + width = 4; \ + numargs = read_memory_integer (pc+2,width); \ + if (width > 1) \ + flip_bytes (&numargs, width); \ + numargs = - sign_extend (numargs, width*8) / 4; } \ + else numargs = -1; \ +} + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ int regmask,regnum; \ + int localcount; \ + CORE_ADDR enter_addr; \ + CORE_ADDR next_addr; \ + \ + enter_addr = get_pc_function_start ((frame_info)->pc); \ + regmask = read_memory_integer (enter_addr+1, 1); \ + localcount = ns32k_localcount (enter_addr); \ + next_addr = (frame_info)->frame + localcount; \ + for (regnum = 0; regnum < 8; regnum++, regmask >>= 1) \ + (frame_saved_regs).regs[regnum] \ + = (regmask & 1) ? (next_addr -= 4) : 0; \ + (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4; \ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \ + (frame_saved_regs).regs[FP_REGNUM] \ + = read_memory_integer ((frame_info)->frame, 4); } + + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM); \ + register int regnum; \ + sp = push_word (sp, read_register (PC_REGNUM)); \ + sp = push_word (sp, read_register (FP_REGNUM)); \ + write_register (FP_REGNUM, sp); \ + for (regnum = 0; regnum < 8; regnum++) \ + sp = push_word (sp, read_register (regnum)); \ + write_register (SP_REGNUM, sp); \ +} + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ +{ register struct frame_info *frame = get_current_frame (); \ + register CORE_ADDR fp; \ + register int regnum; \ + struct frame_saved_regs fsr; \ + struct frame_info *fi; \ + fp = frame->frame; \ + get_frame_saved_regs (frame, &fsr); \ + for (regnum = 0; regnum < 8; regnum++) \ + if (fsr.regs[regnum]) \ + write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \ + write_register (FP_REGNUM, read_memory_integer (fp, 4)); \ + write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \ + write_register (SP_REGNUM, fp + 8); \ + flush_cached_frames (); \ +} + +/* This sequence of words is the instructions + enter 0xff,0 82 ff 00 + jsr @0x00010203 7f ae c0 01 02 03 + adjspd 0x69696969 7f a5 01 02 03 04 + bpt f2 + Note this is 16 bytes. */ + +#define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 } + +#define CALL_DUMMY_START_OFFSET 3 +#define CALL_DUMMY_LENGTH 16 +#define CALL_DUMMY_ADDR 5 +#define CALL_DUMMY_NARGS 11 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ int flipped = fun | 0xc0000000; \ + flip_bytes (&flipped, 4); \ + *((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped; \ + flipped = - nargs * 4; \ + flip_bytes (&flipped, 4); \ + *((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped; \ +} diff --git a/gdb/config/ns32k/tm-nbsd.h b/gdb/config/ns32k/tm-nbsd.h new file mode 100644 index 0000000..6e61de3 --- /dev/null +++ b/gdb/config/ns32k/tm-nbsd.h @@ -0,0 +1,79 @@ +/* Macro definitions for ns32k running under NetBSD. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Override number of expected traps from sysv. */ +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* Most definitions from umax could be used. */ + +#include "ns32k/tm-umax.h" + +/* Generic NetBSD definitions. */ + +#include "tm-nbsd.h" + +/* Saved Pc. Get it from sigcontext if within sigtramp. */ + +/* Offset to saved PC in sigcontext, from <machine/signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 20 + +#undef FRAME_SAVED_PC(FRAME) +#define FRAME_SAVED_PC(FRAME) \ + (((FRAME)->signal_handler_caller \ + ? sigtramp_saved_pc (FRAME) \ + : read_memory_integer ((FRAME)->frame + 4, 4)) \ + ) + + +/* tm-umax.h assumes a 32082 fpu. We have a 32382 fpu. */ +#undef REGISTER_NAMES +#undef NUM_REGS +#undef REGISTER_BYTES +#undef REGISTER_BYTE +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "sp", "fp", "pc", "ps", \ + "fsr", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", "xx", \ + } + +#define NUM_REGS 29 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES \ + ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \ + + 8 * REGISTER_RAW_SIZE(LP0_REGNUM)) + +/* Index within `registers' of the first byte of the space for + register N. */ + +/* This is a bit yuck. The even numbered double precision floating + point long registers occupy the same space as the even:odd numbered + single precision floating point registers, but the extra 32381 fpu + registers are at the end. Doing it this way is compatable for both + 32081 and 32381 equiped machines. */ + +#define REGISTER_BYTE(N) (((N) < LP0_REGNUM? (N)\ + : ((N) - LP0_REGNUM) & 1? (N) - 1 \ + : ((N) - LP0_REGNUM + FP0_REGNUM)) * 4) + diff --git a/gdb/config/ns32k/tm-ns32km3.h b/gdb/config/ns32k/tm-ns32km3.h new file mode 100644 index 0000000..27d07d7 --- /dev/null +++ b/gdb/config/ns32k/tm-ns32km3.h @@ -0,0 +1,73 @@ +/* Macro definitions for ns532, Mach 3.0 + Copyright (C) 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include common definitions for Mach3 systems */ +#include "nm-m3.h" + +/* Define offsets to access CPROC stack when it does not have + * a kernel thread. + */ +#define MACHINE_CPROC_SP_OFFSET 20 +#define MACHINE_CPROC_PC_OFFSET 16 +#define MACHINE_CPROC_FP_OFFSET 12 + +#include <ns532/psl.h> +#include <ns532/vmparam.h> + +/* Thread flavors used in re-setting the T bit. + * @@ this is also bad for cross debugging. + */ +#define TRACE_FLAVOR NS532_THREAD_STATE +#define TRACE_FLAVOR_SIZE NS532_THREAD_STATE_COUNT +#define TRACE_SET(x,state) \ + ((struct ns532_thread_state *)state)->psr |= PSR_T +#define TRACE_CLEAR(x,state) \ + ((((struct ns532_thread_state *)state)->psr &= ~PSR_T), 1) + +/* we can do it */ +#define ATTACH_DETACH 1 + +/* Address of end of stack space. + * for MACH, see <ns532/vmparam.h> + */ +#define STACK_END_ADDR USRSTACK + +#include "ns32k/tm-umax.h" + +/* tm-umax.h assumes a 32082 fpu. We have a 32382 fpu. */ +#undef REGISTER_NAMES +#undef NUM_REGS +#undef REGISTER_BYTES +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "sp", "fp", "pc", "ps", \ + "fsr", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", "xx", \ + } + +#define NUM_REGS 29 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES \ + ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \ + + 8 * REGISTER_RAW_SIZE(LP0_REGNUM)) diff --git a/gdb/config/ns32k/tm-umax.h b/gdb/config/ns32k/tm-umax.h new file mode 100644 index 0000000..1fdfb2f --- /dev/null +++ b/gdb/config/ns32k/tm-umax.h @@ -0,0 +1,370 @@ +/* Definitions to make GDB run on an encore under umax 4.2 + Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is also included by tm-ns32km3.h, as well as being used by umax. */ + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* Need to get function ends by adding this to epilogue address from .bf + record, not using x_fsize field. */ +#define FUNCTION_EPILOGUE_SIZE 4 + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ +{ register unsigned char op = read_memory_integer (pc, 1); \ + if (op == 0x82) { op = read_memory_integer (pc+2,1); \ + if ((op & 0x80) == 0) pc += 3; \ + else if ((op & 0xc0) == 0x80) pc += 4; \ + else pc += 6; \ + } \ +} + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + read_memory_integer (read_register (SP_REGNUM), 4) + +/* Address of end of stack space. */ + +#ifndef STACK_END_ADDR +#define STACK_END_ADDR (0xfffff000) +#endif + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0xf2} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +#if 0 /* Disable until fixed *correctly*. */ +#ifndef INVALID_FLOAT +#ifndef NaN +#include <nan.h> +#endif NaN + +/* Return 1 if P points to an invalid floating point value. */ +/* Surely wrong for cross-debugging. */ +#define INVALID_FLOAT(p, s) \ + ((s == sizeof (float))? \ + NaF (*(float *) p) : \ + NaD (*(double *) p)) +#endif /* INVALID_FLOAT */ +#endif + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 25 + +#define NUM_GENERAL_REGS 8 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "sp", "fp", "pc", "ps", \ + "fsr", \ + "l0", "l1", "l2", "l3", "xx", \ + } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define R0_REGNUM 0 /* General register 0 */ +#define FP0_REGNUM 8 /* Floating point register 0 */ +#define SP_REGNUM 16 /* Contains address of top of stack */ +#define AP_REGNUM FP_REGNUM +#define FP_REGNUM 17 /* Contains address of executing stack frame */ +#define PC_REGNUM 18 /* Contains program counter */ +#define PS_REGNUM 19 /* Contains processor status */ +#define FPS_REGNUM 20 /* Floating point status register */ +#define LP0_REGNUM 21 /* Double register 0 (same as FP0) */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES \ + ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \ + + 4 * REGISTER_RAW_SIZE(LP0_REGNUM)) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \ + LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the 32000, all regs are 4 bytes + except for the doubled floating registers. */ + +#define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4) + +/* Number of bytes of storage in the program's representation + for register N. On the 32000, all regs are 4 bytes + except for the doubled floating registers. */ + +#define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((N) < FP0_REGNUM) ? \ + builtin_type_int : \ + ((N) < FP0_REGNUM + 8) ? \ + builtin_type_float : \ + ((N) < LP0_REGNUM) ? \ + builtin_type_int : \ + builtin_type_double) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + On this machine this is a no-op, because gcc isn't used on it + yet. So this calling convention is not used. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF+REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the ns32000 series, the frame's nominal address is the FP + value, and at that address is saved previous FP value as a 4-byte word. */ + +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4)) + +/* Compute base of arguments. */ + +#define FRAME_ARGS_ADDRESS(fi) \ + ((ns32k_get_enter_addr ((fi)->pc) > 1) ? \ + ((fi)->frame) : (read_register (SP_REGNUM) - 4)) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Get the address of the enter opcode for this function, if it is active. + Returns positive address > 1 if pc is between enter/exit, + 1 if pc before enter or after exit, 0 otherwise. */ + +extern CORE_ADDR ns32k_get_enter_addr (); + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. + Encore's C compiler often reuses same area on stack for args, + so this will often not work properly. If the arg names + are known, it's likely most of them will be printed. */ + +#define FRAME_NUM_ARGS(numargs, fi) \ +{ CORE_ADDR pc; \ + CORE_ADDR enter_addr; \ + unsigned int insn; \ + unsigned int addr_mode; \ + int width; \ + \ + numargs = -1; \ + enter_addr = ns32k_get_enter_addr ((fi)->pc); \ + if (enter_addr > 0) \ + { \ + pc = (enter_addr == 1) ? \ + SAVED_PC_AFTER_CALL (fi) : \ + FRAME_SAVED_PC (fi); \ + insn = read_memory_integer (pc,2); \ + addr_mode = (insn >> 11) & 0x1f; \ + insn = insn & 0x7ff; \ + if ((insn & 0x7fc) == 0x57c && \ + addr_mode == 0x14) /* immediate */ \ + { \ + if (insn == 0x57c) /* adjspb */ \ + width = 1; \ + else if (insn == 0x57d) /* adjspw */ \ + width = 2; \ + else if (insn == 0x57f) /* adjspd */ \ + width = 4; \ + numargs = read_memory_integer (pc+2,width); \ + if (width > 1) \ + flip_bytes (&numargs, width); \ + numargs = - sign_extend (numargs, width*8) / 4;\ + } \ + } \ +} + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ \ + register int regmask, regnum; \ + int localcount; \ + register CORE_ADDR enter_addr; \ + register CORE_ADDR next_addr; \ + \ + memset (&(frame_saved_regs), '\0', sizeof (frame_saved_regs)); \ + enter_addr = ns32k_get_enter_addr ((frame_info)->pc); \ + if (enter_addr > 1) \ + { \ + regmask = read_memory_integer (enter_addr+1, 1) & 0xff; \ + localcount = ns32k_localcount (enter_addr); \ + next_addr = (frame_info)->frame + localcount; \ + for (regnum = 0; regnum < 8; regnum++, regmask >>= 1) \ + (frame_saved_regs).regs[regnum] = (regmask & 1) ? \ + (next_addr -= 4) : 0; \ + (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;\ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;\ + (frame_saved_regs).regs[FP_REGNUM] = \ + (read_memory_integer ((frame_info)->frame, 4));\ + } \ + else if (enter_addr == 1) \ + { \ + CORE_ADDR sp = read_register (SP_REGNUM); \ + (frame_saved_regs).regs[PC_REGNUM] = sp; \ + (frame_saved_regs).regs[SP_REGNUM] = sp + 4; \ + } \ +} + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM);\ + register int regnum; \ + sp = push_word (sp, read_register (PC_REGNUM)); \ + sp = push_word (sp, read_register (FP_REGNUM)); \ + write_register (FP_REGNUM, sp); \ + for (regnum = 0; regnum < 8; regnum++) \ + sp = push_word (sp, read_register (regnum)); \ + write_register (SP_REGNUM, sp); \ +} + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ +{ register struct frame_info *frame = get_current_frame (); \ + register CORE_ADDR fp; \ + register int regnum; \ + struct frame_saved_regs fsr; \ + struct frame_info *fi; \ + fp = frame->frame; \ + get_frame_saved_regs (frame, &fsr); \ + for (regnum = 0; regnum < 8; regnum++) \ + if (fsr.regs[regnum]) \ + write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \ + write_register (FP_REGNUM, read_memory_integer (fp, 4)); \ + write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \ + write_register (SP_REGNUM, fp + 8); \ + flush_cached_frames (); \ +} + +/* This sequence of words is the instructions + enter 0xff,0 82 ff 00 + jsr @0x00010203 7f ae c0 01 02 03 + adjspd 0x69696969 7f a5 01 02 03 04 + bpt f2 + Note this is 16 bytes. */ + +#define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 } + +#define CALL_DUMMY_START_OFFSET 3 +#define CALL_DUMMY_LENGTH 16 +#define CALL_DUMMY_ADDR 5 +#define CALL_DUMMY_NARGS 11 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ \ + int flipped; \ + flipped = fun | 0xc0000000; \ + flip_bytes (&flipped, 4); \ + *((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped; \ + flipped = - nargs * 4; \ + flip_bytes (&flipped, 4); \ + *((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped; \ +} diff --git a/gdb/config/ns32k/umax.mh b/gdb/config/ns32k/umax.mh new file mode 100644 index 0000000..e43f6ec --- /dev/null +++ b/gdb/config/ns32k/umax.mh @@ -0,0 +1,5 @@ +# Host: Encore running umax 4.2 +XDEPFILES= umax-xdep.o +XM_FILE= xm-umax.h +NAT_FILE= nm-umax.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o diff --git a/gdb/config/ns32k/umax.mt b/gdb/config/ns32k/umax.mt new file mode 100644 index 0000000..4c9169d --- /dev/null +++ b/gdb/config/ns32k/umax.mt @@ -0,0 +1,3 @@ +# Target: Encore running umax 4.2 +TDEPFILES= ns32k-tdep.o +TM_FILE= tm-umax.h diff --git a/gdb/config/ns32k/xm-merlin.h b/gdb/config/ns32k/xm-merlin.h new file mode 100644 index 0000000..b8329f6 --- /dev/null +++ b/gdb/config/ns32k/xm-merlin.h @@ -0,0 +1,65 @@ +/* Definitions to make GDB run on a merlin under utek 2.1 + Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include <machine/reg.h> + +/* This machine doesn't have the siginterrupt call. */ +#define NO_SIGINTERRUPT + +/* Under Utek, a ptrace'd process can be the only active process for + an executable. Therefore instead of /bin/sh use gdb-sh (which should + just be a copy of /bin/sh which is world readable and writeable). */ +/* FIXME: name should be passed in from Makefile so it can use prefix. */ +#define SHELL_FILE "/usr/local/lib/gdb-sh" + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0xfef000) + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ \ + switch (regno) { \ + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: \ + addr = blockend + (R0 - regno) * sizeof (int); break; \ + case PC_REGNUM: \ + addr = blockend + PC * sizeof (int); break; \ + case SP_REGNUM: \ + addr = blockend + SP * sizeof (int); break; \ + case FP_REGNUM: \ + addr = blockend + FP * sizeof (int); break; \ + case PS_REGNUM: \ + addr = blockend + 12 * sizeof (int); break; \ + case FPS_REGNUM: \ + addr = 108; break; \ + case FP0_REGNUM + 0: case FP0_REGNUM + 1: \ + case FP0_REGNUM + 2: case FP0_REGNUM + 3: \ + case FP0_REGNUM + 4: case FP0_REGNUM + 5: \ + case FP0_REGNUM + 6: case FP0_REGNUM + 7: \ + addr = 76 + (regno - FP0_REGNUM) * sizeof (float); break; \ + case LP0_REGNUM + 0: case LP0_REGNUM + 1: \ + case LP0_REGNUM + 2: case LP0_REGNUM + 3: \ + addr = 76 + (regno - LP0_REGNUM) * sizeof (double); break; \ + default: \ + printf ("bad argument to REGISTER_U_ADDR %d\n", regno); \ + abort (); \ + } \ +} diff --git a/gdb/config/ns32k/xm-nbsd.h b/gdb/config/ns32k/xm-nbsd.h new file mode 100644 index 0000000..db8c0bc --- /dev/null +++ b/gdb/config/ns32k/xm-nbsd.h @@ -0,0 +1,21 @@ +/* Parameters for execution on a ns32k running NetBSD, for GDB. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic NetBSD host definitions. */ +#include "xm-nbsd.h" diff --git a/gdb/config/ns32k/xm-ns32km3.h b/gdb/config/ns32k/xm-ns32km3.h new file mode 100644 index 0000000..3d08e67 --- /dev/null +++ b/gdb/config/ns32k/xm-ns32km3.h @@ -0,0 +1,23 @@ +/* Definitions to make GDB run on Mach 3 on an National ns32k + Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* Do implement the attach and detach commands. */ +#define ATTACH_DETACH 1 diff --git a/gdb/config/ns32k/xm-umax.h b/gdb/config/ns32k/xm-umax.h new file mode 100644 index 0000000..1bb0071 --- /dev/null +++ b/gdb/config/ns32k/xm-umax.h @@ -0,0 +1,26 @@ +/* Definitions to make GDB run on an encore under umax 4.2 + Copyright 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +#define HAVE_WAIT_STRUCT + +/* Doesn't have siginterupt. */ +#define NO_SIGINTERRUPT + diff --git a/gdb/config/pa/hppabsd.mh b/gdb/config/pa/hppabsd.mh new file mode 100644 index 0000000..dfd2d4c --- /dev/null +++ b/gdb/config/pa/hppabsd.mh @@ -0,0 +1,7 @@ +# Host: Hewlett-Packard PA-RISC machine, running BSD +XDEPFILES= ser-tcp.o +XM_FILE= xm-hppab.h +NAT_FILE= nm-hppab.h +NATDEPFILES= hppab-nat.o corelow.o core-aout.o inftarg.o fork-child.o somread.o infptrace.o hp-psymtab-read.o hp-symtab-read.o somsolib.o + +GDBSERVER_DEPFILES= low-hppabsd.o diff --git a/gdb/config/pa/hppabsd.mt b/gdb/config/pa/hppabsd.mt new file mode 100644 index 0000000..0fc0380 --- /dev/null +++ b/gdb/config/pa/hppabsd.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running bsd +TDEPFILES= hppa-tdep.o +TM_FILE= tm-hppab.h diff --git a/gdb/config/pa/hppahpux.mh b/gdb/config/pa/hppahpux.mh new file mode 100644 index 0000000..0d30244 --- /dev/null +++ b/gdb/config/pa/hppahpux.mh @@ -0,0 +1,9 @@ +# Host: Hewlett-Packard PA-RISC machine, running HPUX + +XM_FILE= xm-hppah.h +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-hppah.h +NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o somread.o infptrace.o hp-psymtab-read.o hp-symtab-read.o somsolib.o + +HOST_IPC=-DBSD_IPC -DPOSIX_WAIT diff --git a/gdb/config/pa/hppahpux.mt b/gdb/config/pa/hppahpux.mt new file mode 100644 index 0000000..dddb3f5 --- /dev/null +++ b/gdb/config/pa/hppahpux.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running hpux +TDEPFILES= hppa-tdep.o +TM_FILE= tm-hppah.h diff --git a/gdb/config/pa/hppaosf.mh b/gdb/config/pa/hppaosf.mh new file mode 100644 index 0000000..6bde9c0 --- /dev/null +++ b/gdb/config/pa/hppaosf.mh @@ -0,0 +1,9 @@ +# Host: Hewlett-Packard PA-RISC machine, running BSD +XDEPFILES= ser-tcp.o +XM_FILE= xm-hppab.h +NAT_FILE= nm-hppao.h +NATDEPFILES= fork-child.o m3-nat.o hppam3-nat.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o +NAT_CLIBS= -lmachid -lnetname -lmach + +GDBSERVER_DEPFILES= low-hppabsd.o + diff --git a/gdb/config/pa/hppaosf.mt b/gdb/config/pa/hppaosf.mt new file mode 100644 index 0000000..6754023 --- /dev/null +++ b/gdb/config/pa/hppaosf.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running OSF1 +TDEPFILES= hppa-tdep.o +TM_FILE= tm-hppao.h diff --git a/gdb/config/pa/hppapro.mt b/gdb/config/pa/hppapro.mt new file mode 100644 index 0000000..4851b18 --- /dev/null +++ b/gdb/config/pa/hppapro.mt @@ -0,0 +1,3 @@ +# Target: PA based debug monitor +TDEPFILES= hppa-tdep.o op50-rom.o w89k-rom.o monitor.o xmodem.o dsrec.o +TM_FILE= tm-pro.h diff --git a/gdb/config/pa/hpux1020.mh b/gdb/config/pa/hpux1020.mh new file mode 100644 index 0000000..28eae11 --- /dev/null +++ b/gdb/config/pa/hpux1020.mh @@ -0,0 +1,11 @@ +# Host: Hewlett-Packard PA-RISC machine, running HPUX 10.20 + +MH_CFLAGS = -D__HP_CURSES + +XM_FILE= xm-hppah.h +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-hppah.h +NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o infptrace.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o + +HOST_IPC=-DBSD_IPC -DPOSIX_WAIT diff --git a/gdb/config/pa/hpux1020.mt b/gdb/config/pa/hpux1020.mt new file mode 100644 index 0000000..a856d8c --- /dev/null +++ b/gdb/config/pa/hpux1020.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running hpux +TDEPFILES= hppa-tdep.o remote-pa.o somsolib.o corelow.o +TM_FILE= tm-hppah.h diff --git a/gdb/config/pa/hpux1100.mh b/gdb/config/pa/hpux1100.mh new file mode 100644 index 0000000..10fbd7e --- /dev/null +++ b/gdb/config/pa/hpux1100.mh @@ -0,0 +1,11 @@ +# Host: Hewlett-Packard PA-RISC machine, running HPUX 11.00 + +MH_CFLAGS = -D__HP_CURSES + +XM_FILE= xm-hppah.h +XDEPFILES= ser-tcp.o + +NAT_FILE= nm-hppah11.h +NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o infttrace.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o + +HOST_IPC=-DBSD_IPC -DPOSIX_WAIT diff --git a/gdb/config/pa/hpux1100.mt b/gdb/config/pa/hpux1100.mt new file mode 100644 index 0000000..405f73a --- /dev/null +++ b/gdb/config/pa/hpux1100.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running HPUX 11.00 +TDEPFILES= hppa-tdep.o remote-pa.o somsolib.o +TM_FILE= tm-hppah.h diff --git a/gdb/config/pa/nm-hppab.h b/gdb/config/pa/nm-hppab.h new file mode 100644 index 0000000..6b63674 --- /dev/null +++ b/gdb/config/pa/nm-hppab.h @@ -0,0 +1,135 @@ +/* HPPA PA-RISC machine native support for BSD, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "somsolib.h" + +#define U_REGS_OFFSET 0 + +#define KERNEL_U_ADDR 0 + +/* What a coincidence! */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = (int)(blockend) + REGISTER_BYTE (regno);} + +/* 3rd argument to ptrace is supposed to be a caddr_t. */ + +#define PTRACE_ARG3_TYPE caddr_t + +/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace + with five arguments, so programs written for normal ptrace lose. */ +#define FIVE_ARG_PTRACE + + +/* This macro defines the register numbers (from REGISTER_NAMES) that + are effectively unavailable to the user through ptrace(). It allows + us to include the whole register set in REGISTER_NAMES (inorder to + better support remote debugging). If it is used in + fetch/store_inferior_registers() gdb will not complain about I/O errors + on fetching these registers. If all registers in REGISTER_NAMES + are available, then return false (0). */ + +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == 0) || \ + ((regno) == PCSQ_HEAD_REGNUM) || \ + ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ + ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) + +/* fetch_inferior_registers is in hppab-nat.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* attach/detach works to some extent under BSD and HPUX. So long + as the process you're attaching to isn't blocked waiting on io, + blocked waiting on a signal, or in a system call things work + fine. (The problems in those cases are related to the fact that + the kernel can't provide complete register information for the + target process... Which really pisses off GDB.) */ + +#define ATTACH_DETACH + +/* The PA-BSD kernel has support for using the data memory break bit + to implement fast watchpoints. + + Watchpoints on the PA act much like traditional page protection + schemes, but with some notable differences. + + First, a special bit in the page table entry is used to cause + a trap when a specific page is written to. This avoids having + to overload watchpoints on the page protection bits. This makes + it possible for the kernel to easily decide if a trap was caused + by a watchpoint or by the user writing to protected memory and can + signal the user program differently in each case. + + Second, the PA has a bit in the processor status word which causes + data memory breakpoints (aka watchpoints) to be disabled for a single + instruction. This bit can be used to avoid the overhead of unprotecting + and reprotecting pages when it becomes necessary to step over a watchpoint. + + + When the kernel receives a trap indicating a write to a page which + is being watched, the kernel performs a couple of simple actions. First + is sets the magic "disable memory breakpoint" bit in the processor + status word, it then sends a SIGTRAP to the process which caused the + trap. + + GDB will take control and catch the signal for the inferior. GDB then + examines the PSW-X bit to determine if the SIGTRAP was caused by a + watchpoint firing. If so GDB single steps the inferior over the + instruction which caused the watchpoint to trigger (note because the + kernel disabled the data memory break bit for one instruction no trap + will be taken!). GDB will then determines the appropriate action to + take. (this may include restarting the inferior if the watchpoint + fired because of a write to an address on the same page as a watchpoint, + but no write to the watched address occured). */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS /* Enable the code in procfs.c */ + +/* The PA can watch any number of locations, there's no need for it to reject + anything (generic routines already check that all intermediates are + in memory). */ +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + ((type) == bp_hardware_watchpoint) + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. + + On a PA running BSD, it is trivial to identify when it will be + necessary to step over a hardware watchpoint as we can examine + the PSW-X bit. If the bit is on, then we trapped because of a + watchpoint, else we trapped for some other reason. */ +#define STOPPED_BY_WATCHPOINT(W) \ + ((W).kind == TARGET_WAITKIND_STOPPED \ + && (W).value.sig == TARGET_SIGNAL_TRAP \ + && ((int) read_register (IPSW_REGNUM) & 0x00100000)) + +/* The PA can single step over a watchpoint if the kernel has set the + "X" bit in the processor status word (disable data memory breakpoint + for one instruction). + + The kernel will always set this bit before notifying the inferior + that it hit a watchpoint. Thus, the inferior can single step over + the instruction which caused the watchpoint to fire. This avoids + the traditional need to disable the watchpoint, step the inferior, + then enable the watchpoint again. */ +#define HAVE_STEPPABLE_WATCHPOINT + +/* Use these macros for watchpoint insertion/deletion. */ +/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */ +#define target_insert_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 1) +#define target_remove_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 0) diff --git a/gdb/config/pa/nm-hppah.h b/gdb/config/pa/nm-hppah.h new file mode 100644 index 0000000..0f5ef01 --- /dev/null +++ b/gdb/config/pa/nm-hppah.h @@ -0,0 +1,281 @@ +/* Native support for HPPA-RISC machine running HPUX, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define U_REGS_OFFSET 0 + +#define KERNEL_U_ADDR 0 + +/* What a coincidence! */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = (int)(blockend) + REGISTER_BYTE (regno);} + +/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace + with five arguments, so programs written for normal ptrace lose. */ +#define FIVE_ARG_PTRACE + +/* We need to figure out where the text region is so that we use the + appropriate ptrace operator to manipulate text. Simply reading/writing + user space will crap out HPUX. */ +#define NEED_TEXT_START_END 1 + +/* This macro defines the register numbers (from REGISTER_NAMES) that + are effectively unavailable to the user through ptrace(). It allows + us to include the whole register set in REGISTER_NAMES (inorder to + better support remote debugging). If it is used in + fetch/store_inferior_registers() gdb will not complain about I/O errors + on fetching these registers. If all registers in REGISTER_NAMES + are available, then return false (0). */ + +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == 0) || \ + ((regno) == PCSQ_HEAD_REGNUM) || \ + ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ + ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) + +/* In hppah-nat.c: */ +#define FETCH_INFERIOR_REGISTERS +#define CHILD_XFER_MEMORY +#define CHILD_POST_FOLLOW_INFERIOR_BY_CLONE +#define CHILD_POST_FOLLOW_VFORK + +/* While this is for use by threaded programs, it doesn't appear + * to hurt non-threaded ones. This is used in infrun.c: */ +#define PREPARE_TO_PROCEED() hppa_prepare_to_proceed() +extern int hppa_prepare_to_proceed PARAMS(( void )); + +/* In infptrace.c or infttrace.c: */ +#define CHILD_PID_TO_EXEC_FILE +#define CHILD_POST_STARTUP_INFERIOR +#define CHILD_ACKNOWLEDGE_CREATED_INFERIOR +#define CHILD_INSERT_FORK_CATCHPOINT +#define CHILD_REMOVE_FORK_CATCHPOINT +#define CHILD_INSERT_VFORK_CATCHPOINT +#define CHILD_REMOVE_VFORK_CATCHPOINT +#define CHILD_HAS_FORKED +#define CHILD_HAS_VFORKED +#define CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC +#define CHILD_INSERT_EXEC_CATCHPOINT +#define CHILD_REMOVE_EXEC_CATCHPOINT +#define CHILD_HAS_EXECD +#define CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL +#define CHILD_HAS_SYSCALL_EVENT +#define CHILD_POST_ATTACH +#define CHILD_THREAD_ALIVE + +#define REQUIRE_ATTACH(pid) hppa_require_attach(pid) +extern int hppa_require_attach PARAMS ((int)); + +#define REQUIRE_DETACH(pid,signal) hppa_require_detach(pid,signal) +extern int hppa_require_detach PARAMS ((int,int)); + +/* So we can cleanly use code in infptrace.c. */ +#define PT_KILL PT_EXIT +#define PT_STEP PT_SINGLE +#define PT_CONTINUE PT_CONTIN + +/* FIXME HP MERGE : Previously, PT_RDUAREA. this is actually fixed + in gdb-hp-snapshot-980509 */ +#define PT_READ_U PT_RUAREA +#define PT_WRITE_U PT_WUAREA +#define PT_READ_I PT_RIUSER +#define PT_READ_D PT_RDUSER +#define PT_WRITE_I PT_WIUSER +#define PT_WRITE_D PT_WDUSER + +/* attach/detach works to some extent under BSD and HPUX. So long + as the process you're attaching to isn't blocked waiting on io, + blocked waiting on a signal, or in a system call things work + fine. (The problems in those cases are related to the fact that + the kernel can't provide complete register information for the + target process... Which really pisses off GDB.) */ + +#define ATTACH_DETACH + +/* In infptrace or infttrace.c: */ + +/* Starting with HP-UX 10.30, support is provided (in the form of + ttrace requests) for memory-protection-based hardware watchpoints. + + The 10.30 implementation of these functions reside in infttrace.c. + + Stubs of these functions will be provided in infptrace.c, so that + 10.20 will at least link. However, the "can I use a fast watchpoint?" + query will always return "No" for 10.20. */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +/* The PA can watch any number of locations (generic routines already check + that all intermediates are in watchable memory locations). */ +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + hppa_can_use_hw_watchpoint(type, cnt, ot) + +/* The PA can also watch memory regions of arbitrary size, since we're using + a page-protection scheme. (On some targets, apparently watch registers + are used, which can only accomodate regions of REGISTER_SIZE.) */ +#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \ + (1) + +/* However, some addresses may not be profitable to use hardware to watch, + or may be difficult to understand when the addressed object is out of + scope, and hence should be unwatched. On some targets, this may have + severe performance penalties, such that we might as well use regular + watchpoints, and save (possibly precious) hardware watchpoints for other + locations. + + On HP-UX, we choose not to watch stack-based addresses, because + + [1] Our implementation relies on page protection traps. The granularity + of these is large and so can generate many false hits, which are expensive + to respond to. + + [2] Watches of "*p" where we may not know the symbol that p points to, + make it difficult to know when the addressed object is out of scope, and + hence shouldn't be watched. Page protection that isn't removed when the + addressed object is out of scope will either degrade execution speed + (false hits) or give false triggers (when the address is recycled by + other calls). + + Since either of these points results in a slow-running inferior, we might + as well use normal watchpoints, aka single-step & test. */ +#define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) \ + hppa_range_profitable_for_hw_watchpoint(pid, start, (LONGEST)(len)) + +/* On HP-UX, we're using page-protection to implement hardware watchpoints. + When an instruction attempts to write to a write-protected memory page, + a SIGBUS is raised. At that point, the write has not actually occurred. + + We must therefore remove page-protections; single-step the inferior (to + allow the write to happen); restore page-protections; and check whether + any watchpoint triggered. + + If none did, then the write was to a "nearby" location that just happens + to fall on the same page as a watched location, and so can be ignored. + + The only intended client of this macro is wait_for_inferior(), in infrun.c. + When HAVE_NONSTEPPABLE_WATCHPOINT is true, that function will take care + of the stepping & etc. */ + +#define STOPPED_BY_WATCHPOINT(W) \ + ((W.kind == TARGET_WAITKIND_STOPPED) && \ + (stop_signal == TARGET_SIGNAL_BUS) && \ + ! stepped_after_stopped_by_watchpoint && \ + bpstat_have_active_hw_watchpoints ()) + +/* When a hardware watchpoint triggers, we'll move the inferior past it + by removing all eventpoints; stepping past the instruction that caused + the trigger; reinserting eventpoints; and checking whether any watched + location changed. */ +#define HAVE_NONSTEPPABLE_WATCHPOINT + +/* Our implementation of "hardware" watchpoints uses memory page-protection + faults. However, HP-UX has unfortunate interactions between these and + system calls; basically, it's unsafe to have page protections on when a + syscall is running. Therefore, we also ask for notification of syscall + entries and returns. When the inferior enters a syscall, we disable + h/w watchpoints. When the inferior returns from a syscall, we reenable + h/w watchpoints. + + infptrace.c supplies dummy versions of these; infttrace.c is where the + meaningful implementations are. + */ +#define TARGET_ENABLE_HW_WATCHPOINTS(pid) \ + hppa_enable_page_protection_events (pid) +extern void hppa_enable_page_protection_events PARAMS ((int)); + +#define TARGET_DISABLE_HW_WATCHPOINTS(pid) \ + hppa_disable_page_protection_events (pid) +extern void hppa_disable_page_protection_events PARAMS ((int)); + +/* Use these macros for watchpoint insertion/deletion. */ +#define target_insert_watchpoint(addr, len, type) \ + hppa_insert_hw_watchpoint (inferior_pid, addr, (LONGEST)(len), type) + +#define target_remove_watchpoint(addr, len, type) \ + hppa_remove_hw_watchpoint (inferior_pid, addr, (LONGEST)(len), type) + +/* We call our k-thread processes "threads", rather + * than processes. So we need a new way to print + * the string. Code is in hppah-nat.c. + */ +#define target_pid_to_str( pid ) \ + hppa_pid_to_str( pid ) +extern char * hppa_pid_to_str PARAMS ((pid_t)); + +#define target_tid_to_str( pid ) \ + hppa_tid_to_str( pid ) +extern char * hppa_tid_to_str PARAMS ((pid_t)); + +/* For this, ID can be either a process or thread ID, and the function + will describe it appropriately, returning the description as a printable + string. + + The function that implements this macro is defined in infptrace.c and + infttrace.c. + */ +#define target_pid_or_tid_to_str(ID) \ + hppa_pid_or_tid_to_str (ID) +extern char * hppa_pid_or_tid_to_str PARAMS ((pid_t)); + +/* This is used when handling events caused by a call to vfork(). On ptrace- + based HP-UXs, when you resume the vforked child, the parent automagically + begins running again. To prevent this runaway, this function is used. + + Note that for vfork on HP-UX, we receive three events of interest: + + 1. the vfork event for the new child process + 2. the exit or exec event of the new child process (actually, you get + two exec events on ptrace-based HP-UXs) + 3. the vfork event for the original parent process + + The first is always received first. The other two may be received in any + order; HP-UX doesn't guarantee an order. + */ +#define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) \ + hppa_ensure_vforking_parent_remains_stopped (PID) +extern void hppa_ensure_vforking_parent_remains_stopped PARAMS((int)); + +/* This is used when handling events caused by a call to vfork(). + + On ttrace-based HP-UXs, the parent vfork and child exec arrive more or less + together. That is, you could do two wait()s without resuming either parent + or child, and get both events. + + On ptrace-based HP-UXs, you must resume the child after its exec event is + delivered or you won't get the parent's vfork. I.e., you can't just wait() + and get the parent vfork, after receiving the child exec. + */ +#define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() \ + hppa_resume_execd_vforking_child_to_get_parent_vfork () +extern int hppa_resume_execd_vforking_child_to_get_parent_vfork PARAMS ((void)); + +#ifdef HAVE_HPUX_THREAD_SUPPORT + +#ifdef __STDC__ +struct objfile; +#endif + +void hpux_thread_new_objfile PARAMS ((struct objfile *objfile)); +#define target_new_objfile(OBJFILE) hpux_thread_new_objfile (OBJFILE) + +extern char *hpux_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) hpux_pid_to_str (PID) + +#endif /* HAVE_HPUX_THREAD_SUPPORT */ + +#define HPUXHPPA diff --git a/gdb/config/pa/nm-hppah11.h b/gdb/config/pa/nm-hppah11.h new file mode 100644 index 0000000..7a73c24 --- /dev/null +++ b/gdb/config/pa/nm-hppah11.h @@ -0,0 +1,22 @@ +/* Native support for HPPA-RISC machine running HPUX 11.x, for GDB. + Copyright 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDB_NATIVE_HPUX_11 + +#include "pa/nm-hppah.h" diff --git a/gdb/config/pa/nm-hppao.h b/gdb/config/pa/nm-hppao.h new file mode 100644 index 0000000..a09dfd1 --- /dev/null +++ b/gdb/config/pa/nm-hppao.h @@ -0,0 +1,56 @@ +/* HPPA PA-RISC machine native support for Lites, for GDB. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "nm-m3.h" +#define U_REGS_OFFSET 0 + +#define KERNEL_U_ADDR 0 + +/* What a coincidence! */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = (int)(blockend) + REGISTER_BYTE (regno);} + +/* This macro defines the register numbers (from REGISTER_NAMES) that + are effectively unavailable to the user through ptrace(). It allows + us to include the whole register set in REGISTER_NAMES (inorder to + better support remote debugging). If it is used in + fetch/store_inferior_registers() gdb will not complain about I/O errors + on fetching these registers. If all registers in REGISTER_NAMES + are available, then return false (0). */ + +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == 0) || \ + ((regno) == PCSQ_HEAD_REGNUM) || \ + ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ + ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) + +/* fetch_inferior_registers is in hppab-nat.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* attach/detach works to some extent under BSD and HPUX. So long + as the process you're attaching to isn't blocked waiting on io, + blocked waiting on a signal, or in a system call things work + fine. (The problems in those cases are related to the fact that + the kernel can't provide complete register information for the + target process... Which really pisses off GDB.) */ + +#define ATTACH_DETACH + +#define EMULATOR_BASE 0x90100000 +#define EMULATOR_END 0x90200000 diff --git a/gdb/config/pa/tm-hppa.h b/gdb/config/pa/tm-hppa.h new file mode 100644 index 0000000..559534a --- /dev/null +++ b/gdb/config/pa/tm-hppa.h @@ -0,0 +1,788 @@ +/* Parameters for execution on any Hewlett-Packard PA-RISC machine. + Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1995 + Free Software Foundation, Inc. + + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Forward declarations of some types we use in prototypes */ + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct value; +struct type; +struct inferior_status; +#endif + +/* Target system byte order. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* By default assume we don't have to worry about software floating point. */ +#ifndef SOFT_FLOAT +#define SOFT_FLOAT 0 +#endif + +/* Get at various relevent fields of an instruction word. */ + +#define MASK_5 0x1f +#define MASK_11 0x7ff +#define MASK_14 0x3fff +#define MASK_21 0x1fffff + +/* This macro gets bit fields using HP's numbering (MSB = 0) */ +#ifndef GET_FIELD +#define GET_FIELD(X, FROM, TO) \ + ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1)) +#endif + +/* Watch out for NaNs */ + +#define IEEE_FLOAT + +/* On the PA, any pass-by-value structure > 8 bytes is actually + passed via a pointer regardless of its type or the compiler + used. */ + +#define REG_STRUCT_HAS_ADDR(gcc_p,type) \ + (TYPE_LENGTH (type) > 8) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) pc = skip_prologue (pc) +extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR)); + +/* If PC is in some function-call trampoline code, return the PC + where the function itself actually starts. If not, return NULL. */ + +#define SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc, NULL) +extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *)); + +/* Return non-zero if we are in an appropriate trampoline. */ + +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \ + in_solib_call_trampoline (pc, name) +extern int in_solib_call_trampoline PARAMS ((CORE_ADDR, char *)); + +#define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \ + in_solib_return_trampoline (pc, name) +extern int in_solib_return_trampoline PARAMS ((CORE_ADDR, char *)); + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#undef SAVED_PC_AFTER_CALL +#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call (frame) +extern CORE_ADDR saved_pc_after_call PARAMS ((struct frame_info *)); + +/* Stack grows upward */ +#define INNER_THAN(lhs,rhs) ((lhs) > (rhs)) + +/* elz: adjust the quantity to the next highest value which is 64-bit aligned. + This is used in valops.c, when the sp is adjusted. + On hppa the sp must always be kept 64-bit aligned*/ + +#define STACK_ALIGN(arg) ( ((arg)%8) ? (((arg)+7)&-8) : (arg)) +#define NO_EXTRA_ALIGNMENT_NEEDED 1 + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0x00, 0x01, 0x00, 0x04} +#define BREAKPOINT32 0x10004 + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. + + Not on the PA-RISC */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Sometimes we may pluck out a minimal symbol that has a negative + address. + + An example of this occurs when an a.out is linked against a foo.sl. + The foo.sl defines a global bar(), and the a.out declares a signature + for bar(). However, the a.out doesn't directly call bar(), but passes + its address in another call. + + If you have this scenario and attempt to "break bar" before running, + gdb will find a minimal symbol for bar() in the a.out. But that + symbol's address will be negative. What this appears to denote is + an index backwards from the base of the procedure linkage table (PLT) + into the data linkage table (DLT), the end of which is contiguous + with the start of the PLT. This is clearly not a valid address for + us to set a breakpoint on. + + Note that one must be careful in how one checks for a negative address. + 0xc0000000 is a legitimate address of something in a shared text + segment, for example. Since I don't know what the possible range + is of these "really, truly negative" addresses that come from the + minimal symbols, I'm resorting to the gross hack of checking the + top byte of the address for all 1's. Sigh. + */ +#define PC_REQUIRES_RUN_BEFORE_USE(pc) \ + (! target_has_stack && (pc & 0xFF000000)) + +/* return instruction is bv r0(rp) or bv,n r0(rp)*/ + +#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 4) | 0x2) == 0xE840C002) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 128 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. + They are in rows of eight entries */ + +#define REGISTER_NAMES \ + {"flags", "r1", "rp", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ + "r24", "r25", "r26", "dp", "ret0", "ret1", "sp", "r31", \ + "sar", "pcoqh", "pcsqh", "pcoqt", "pcsqt", "eiem", "iir", "isr", \ + "ior", "ipsw", "goto", "sr4", "sr0", "sr1", "sr2", "sr3", \ + "sr5", "sr6", "sr7", "cr0", "cr8", "cr9", "ccr", "cr12", \ + "cr13", "cr24", "cr25", "cr26", "mpsfu_high","mpsfu_low","mpsfu_ovflo","pad",\ + "fpsr", "fpe1", "fpe2", "fpe3", "fpe4", "fpe5", "fpe6", "fpe7", \ + "fr4", "fr4R", "fr5", "fr5R", "fr6", "fr6R", "fr7", "fr7R", \ + "fr8", "fr8R", "fr9", "fr9R", "fr10", "fr10R", "fr11", "fr11R", \ + "fr12", "fr12R", "fr13", "fr13R", "fr14", "fr14R", "fr15", "fr15R", \ + "fr16", "fr16R", "fr17", "fr17R", "fr18", "fr18R", "fr19", "fr19R", \ + "fr20", "fr20R", "fr21", "fr21R", "fr22", "fr22R", "fr23", "fr23R", \ + "fr24", "fr24R", "fr25", "fr25R", "fr26", "fr26R", "fr27", "fr27R", \ + "fr28", "fr28R", "fr29", "fr29R", "fr30", "fr30R", "fr31", "fr31R"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define R0_REGNUM 0 /* Doesn't actually exist, used as base for + other r registers. */ +#define FLAGS_REGNUM 0 /* Various status flags */ +#define RP_REGNUM 2 /* return pointer */ +#define FP_REGNUM 3 /* Contains address of executing stack */ + /* frame */ +#define SP_REGNUM 30 /* Contains address of top of stack */ +#define SAR_REGNUM 32 /* Shift Amount Register */ +#define IPSW_REGNUM 41 /* Interrupt Processor Status Word */ +#define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */ +#define PCSQ_HEAD_REGNUM 34 /* instruction space queue head */ +#define PCOQ_TAIL_REGNUM 35 /* instruction offset queue tail */ +#define PCSQ_TAIL_REGNUM 36 /* instruction space queue tail */ +#define EIEM_REGNUM 37 /* External Interrupt Enable Mask */ +#define IIR_REGNUM 38 /* Interrupt Instruction Register */ +#define IOR_REGNUM 40 /* Interrupt Offset Register */ +#define SR4_REGNUM 43 /* space register 4 */ +#define RCR_REGNUM 51 /* Recover Counter (also known as cr0) */ +#define CCR_REGNUM 54 /* Coprocessor Configuration Register */ +#define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */ +#define CR27_REGNUM 60 /* Base register for thread-local storage, cr27 */ +#define FP0_REGNUM 64 /* floating point reg. 0 (fspr)*/ +#define FP4_REGNUM 72 + +#define ARG0_REGNUM 26 /* The first argument of a callee. */ +#define ARG1_REGNUM 25 /* The second argument of a callee. */ +#define ARG2_REGNUM 24 /* The third argument of a callee. */ +#define ARG3_REGNUM 23 /* The fourth argument of a callee. */ + +/* compatibility with the rest of gdb. */ +#define PC_REGNUM PCOQ_HEAD_REGNUM +#define NPC_REGNUM PCOQ_TAIL_REGNUM + +/* + * Processor Status Word Masks + */ + +#define PSW_T 0x01000000 /* Taken Branch Trap Enable */ +#define PSW_H 0x00800000 /* Higher-Privilege Transfer Trap Enable */ +#define PSW_L 0x00400000 /* Lower-Privilege Transfer Trap Enable */ +#define PSW_N 0x00200000 /* PC Queue Front Instruction Nullified */ +#define PSW_X 0x00100000 /* Data Memory Break Disable */ +#define PSW_B 0x00080000 /* Taken Branch in Previous Cycle */ +#define PSW_C 0x00040000 /* Code Address Translation Enable */ +#define PSW_V 0x00020000 /* Divide Step Correction */ +#define PSW_M 0x00010000 /* High-Priority Machine Check Disable */ +#define PSW_CB 0x0000ff00 /* Carry/Borrow Bits */ +#define PSW_R 0x00000010 /* Recovery Counter Enable */ +#define PSW_Q 0x00000008 /* Interruption State Collection Enable */ +#define PSW_P 0x00000004 /* Protection ID Validation Enable */ +#define PSW_D 0x00000002 /* Data Address Translation Enable */ +#define PSW_I 0x00000001 /* External, Power Failure, Low-Priority */ + /* Machine Check Interruption Enable */ + +/* When fetching register values from an inferior or a core file, + clean them up using this macro. BUF is a char pointer to + the raw value of the register in the registers[] array. */ + +#define CLEAN_UP_REGISTER_VALUE(regno, buf) \ + do { \ + if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \ + (buf)[3] &= ~0x3; \ + } while (0) + +/* Define DO_REGISTERS_INFO() to do machine-specific formatting + of register dumps. */ + +#define DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp) +extern void pa_do_registers_info PARAMS ((int, int)); + +#if 0 +#define STRCAT_REGISTER(regnum, fpregs, stream, precision) pa_do_strcat_registers_info (regnum, fpregs, stream, precision) +extern void pa_do_strcat_registers_info PARAMS ((int, int, GDB_FILE *, enum precision_type)); +#endif + +/* PA specific macro to see if the current instruction is nullified. */ +#ifndef INSTRUCTION_NULLIFIED +#define INSTRUCTION_NULLIFIED \ + (((int)read_register (IPSW_REGNUM) & 0x00200000) && \ + !((int)read_register (FLAGS_REGNUM) & 0x2)) +#endif + +/* Number of bytes of storage in the actual machine representation + for register N. On the PA-RISC, all regs are 4 bytes, including + the FP registers (they're accessed as two 4 byte halves). */ + +#define REGISTER_RAW_SIZE(N) 4 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) (N) * 4 + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) < FP4_REGNUM ? builtin_type_int : builtin_type_float) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) {write_register (28, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. + + elz: changed what to return when length is > 4: the stored result is + in register 28 and in register 29, with the lower order word being in reg 29, + so we must start reading it from somehere in the middle of reg28 + + FIXME: Not sure what to do for soft float here. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + { \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT && !SOFT_FLOAT) \ + memcpy ((VALBUF), \ + ((char *)(REGBUF)) + REGISTER_BYTE (FP4_REGNUM), \ + TYPE_LENGTH (TYPE)); \ + else \ + memcpy ((VALBUF), \ + (char *)(REGBUF) + REGISTER_BYTE (28) + \ + (TYPE_LENGTH (TYPE) > 4 ? (8 - TYPE_LENGTH (TYPE)) : (4 - TYPE_LENGTH (TYPE))), \ + TYPE_LENGTH (TYPE)); \ + } + + + /* elz: decide whether the function returning a value of type type + will put it on the stack or in the registers. + The pa calling convention says that: + register 28 (called ret0 by gdb) contains any ASCII char, + and any non_floating point value up to 32-bits. + reg 28 and 29 contain non-floating point up tp 64 bits and larger + than 32 bits. (higer order word in reg 28). + fr4: floating point up to 64 bits + sr1: space identifier (32-bit) + stack: any lager than 64-bit, with the address in r28 + */ +extern use_struct_convention_fn hppa_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + For software floating point the return value goes into the integer + registers. But we don't have any flag to key this on, so we always + store the value into the integer registers, and if it's a float value, + then we put it in the float registers too. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (28),(VALBUF), TYPE_LENGTH (TYPE)) ; \ + if (!SOFT_FLOAT) \ + write_register_bytes ((TYPE_CODE(TYPE) == TYPE_CODE_FLT \ + ? REGISTER_BYTE (FP4_REGNUM) \ + : REGISTER_BYTE (28)), \ + (VALBUF), TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (*(int *)((REGBUF) + REGISTER_BYTE (28))) + +/* elz: Return a large value, which is stored on the stack at addr. + This is defined only for the hppa, at this moment. + The above macro EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore, + because it assumes that on exit from a called function which returns + a large structure on the stack, the address of the ret structure is + still in register 28. Unfortunately this register is usually overwritten + by the called function itself, on hppa. This is specified in the calling + convention doc. As far as I know, the only way to get the return value + is to have the caller tell us where it told the callee to put it, rather + than have the callee tell us. +*/ +#define VALUE_RETURNED_FROM_STACK(valtype,addr) \ + hppa_value_returned_from_stack (valtype, addr) + +/* + * This macro defines the register numbers (from REGISTER_NAMES) that + * are effectively unavailable to the user through ptrace(). It allows + * us to include the whole register set in REGISTER_NAMES (inorder to + * better support remote debugging). If it is used in + * fetch/store_inferior_registers() gdb will not complain about I/O errors + * on fetching these registers. If all registers in REGISTER_NAMES + * are available, then return false (0). + */ + +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == 0) || \ + ((regno) == PCSQ_HEAD_REGNUM) || \ + ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ + ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) + +#define INIT_EXTRA_FRAME_INFO(fromleaf, frame) init_extra_frame_info (fromleaf, frame) +extern void init_extra_frame_info PARAMS ((int, struct frame_info *)); + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address + and produces the nominal address of the caller frame. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. + In that case, FRAME_CHAIN_COMBINE is not used. */ + +/* In the case of the PA-RISC, the frame's nominal address + is the address of a 4-byte word containing the calling frame's + address (previous FP). */ + +#define FRAME_CHAIN(thisframe) frame_chain (thisframe) +extern CORE_ADDR frame_chain PARAMS ((struct frame_info *)); + +extern int hppa_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); +#define FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe) + +#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_function_invocation(FI) +extern int frameless_function_invocation PARAMS ((struct frame_info *)); + +extern CORE_ADDR hppa_frame_saved_pc PARAMS ((struct frame_info *frame)); +#define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME) + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + hppa_frame_find_saved_regs (frame_info, &frame_saved_regs) +extern void +hppa_frame_find_saved_regs PARAMS ((struct frame_info *, + struct frame_saved_regs *)); + + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME push_dummy_frame (&inf_status) +extern void push_dummy_frame PARAMS ((struct inferior_status *)); + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ +#define POP_FRAME hppa_pop_frame () +extern void hppa_pop_frame PARAMS ((void)); + +#define INSTRUCTION_SIZE 4 + +#ifndef PA_LEVEL_0 + +/* Non-level zero PA's have space registers (but they don't always have + floating-point, do they???? */ + +/* This sequence of words is the instructions + +; Call stack frame has already been built by gdb. Since we could be calling +; a varargs function, and we do not have the benefit of a stub to put things in +; the right place, we load the first 4 word of arguments into both the general +; and fp registers. +call_dummy + ldw -36(sp), arg0 + ldw -40(sp), arg1 + ldw -44(sp), arg2 + ldw -48(sp), arg3 + ldo -36(sp), r1 + fldws 0(0, r1), fr4 + fldds -4(0, r1), fr5 + fldws -8(0, r1), fr6 + fldds -12(0, r1), fr7 + ldil 0, r22 ; FUNC_LDIL_OFFSET must point here + ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here + ldsid (0,r22), r4 + ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here + ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here + ldsid (0,r1), r20 + combt,=,n r4, r20, text_space ; If target is in data space, do a + ble 0(sr5, r22) ; "normal" procedure call + copy r31, r2 + break 4, 8 + mtsp r21, sr0 + ble,n 0(sr0, r22) +text_space ; Otherwise, go through _sr4export, + ble (sr4, r1) ; which will return back here. + stw r31,-24(r30) + break 4, 8 + mtsp r21, sr0 + ble,n 0(sr0, r22) + nop ; To avoid kernel bugs + nop ; and keep the dummy 8 byte aligned + + The dummy decides if the target is in text space or data space. If + it's in data space, there's no problem because the target can + return back to the dummy. However, if the target is in text space, + the dummy calls the secret, undocumented routine _sr4export, which + calls a function in text space and can return to any space. Instead + of including fake instructions to represent saved registers, we + know that the frame is associated with the call dummy and treat it + specially. + + The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 + kernels. If the memory at the location pointed to by the PC is + 0xffffffff then a ptrace step call will fail (even if the instruction + is nullified). + + The code to pop a dummy frame single steps three instructions + starting with the last mtsp. This includes the nullified "instruction" + following the ble (which is uninitialized junk). If the + "instruction" following the last BLE is 0xffffffff, then the ptrace + will fail and the dummy frame is not correctly popped. + + By placing a NOP in the delay slot of the BLE instruction we can be + sure that we never try to execute a 0xffffffff instruction and + avoid the kernel bug. The second NOP is needed to keep the call + dummy 8 byte aligned. */ + +/* Define offsets into the call dummy for the target function address */ +#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9) +#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10) + +/* Define offsets into the call dummy for the _sr4export address */ +#define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12) +#define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13) + +#define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\ + 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\ + 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\ + 0x20200000, 0x34210000, 0x002010b4, 0x82842022,\ + 0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\ + 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\ + 0x00151820, 0xe6c00002, 0x08000240, 0x08000240} + +#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28) + +#else /* defined PA_LEVEL_0 */ + +/* This is the call dummy for a level 0 PA. Level 0's don't have space + registers (or floating point??), so we skip all that inter-space call stuff, + and avoid touching the fp regs. + +call_dummy + + ldw -36(%sp), %arg0 + ldw -40(%sp), %arg1 + ldw -44(%sp), %arg2 + ldw -48(%sp), %arg3 + ldil 0, %r31 ; FUNC_LDIL_OFFSET must point here + ldo 0(%r31), %r31 ; FUNC_LDO_OFFSET must point here + ble 0(%sr0, %r31) + copy %r31, %r2 + break 4, 8 + nop ; restore_pc_queue expects these + bv,n 0(%r22) ; instructions to be here... + nop +*/ + +/* Define offsets into the call dummy for the target function address */ +#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4) +#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5) + +#define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\ + 0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\ + 0x00010004, 0x08000240, 0xeac0c002, 0x08000240} + +#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12) + +#endif + +#define CALL_DUMMY_START_OFFSET 0 + +/* If we've reached a trap instruction within the call dummy, then + we'll consider that to mean that we've reached the call dummy's + end after its successful completion. */ +#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \ + (PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \ + (read_memory_integer((pc), 4) == BREAKPOINT32)) + +/* + * Insert the specified number of args and function address + * into a call sequence of the above form stored at DUMMYNAME. + * + * On the hppa we need to call the stack dummy through $$dyncall. + * Therefore our version of FIX_CALL_DUMMY takes an extra argument, + * real_pc, which is the location where gdb should start up the + * inferior to do the function call. + */ + +#define FIX_CALL_DUMMY hppa_fix_call_dummy + +extern CORE_ADDR +hppa_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, int, + struct value **, struct type *, int)); + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR +hppa_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, + CORE_ADDR)); + +/* The low two bits of the PC on the PA contain the privilege level. Some + genius implementing a (non-GCC) compiler apparently decided this means + that "addresses" in a text section therefore include a privilege level, + and thus symbol tables should contain these bits. This seems like a + bonehead thing to do--anyway, it seems to work for our purposes to just + ignore those bits. */ +#define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x3) + +#define GDB_TARGET_IS_HPPA + +#define BELIEVE_PCC_PROMOTION 1 + +/* + * Unwind table and descriptor. + */ + +struct unwind_table_entry { + unsigned int region_start; + unsigned int region_end; + + unsigned int Cannot_unwind : 1; /* 0 */ + unsigned int Millicode : 1; /* 1 */ + unsigned int Millicode_save_sr0 : 1; /* 2 */ + unsigned int Region_description : 2; /* 3..4 */ + unsigned int reserved1 : 1; /* 5 */ + unsigned int Entry_SR : 1; /* 6 */ + unsigned int Entry_FR : 4; /* number saved */ /* 7..10 */ + unsigned int Entry_GR : 5; /* number saved */ /* 11..15 */ + unsigned int Args_stored : 1; /* 16 */ + unsigned int Variable_Frame : 1; /* 17 */ + unsigned int Separate_Package_Body : 1; /* 18 */ + unsigned int Frame_Extension_Millicode:1; /* 19 */ + unsigned int Stack_Overflow_Check : 1; /* 20 */ + unsigned int Two_Instruction_SP_Increment:1; /* 21 */ + unsigned int Ada_Region : 1; /* 22 */ + unsigned int cxx_info : 1; /* 23 */ + unsigned int cxx_try_catch : 1; /* 24 */ + unsigned int sched_entry_seq : 1; /* 25 */ + unsigned int reserved2 : 1; /* 26 */ + unsigned int Save_SP : 1; /* 27 */ + unsigned int Save_RP : 1; /* 28 */ + unsigned int Save_MRP_in_frame : 1; /* 29 */ + unsigned int extn_ptr_defined : 1; /* 30 */ + unsigned int Cleanup_defined : 1; /* 31 */ + + unsigned int MPE_XL_interrupt_marker: 1; /* 0 */ + unsigned int HP_UX_interrupt_marker: 1; /* 1 */ + unsigned int Large_frame : 1; /* 2 */ + unsigned int Pseudo_SP_Set : 1; /* 3 */ + unsigned int reserved4 : 1; /* 4 */ + unsigned int Total_frame_size : 27; /* 5..31 */ + + /* This is *NOT* part of an actual unwind_descriptor in an object + file. It is *ONLY* part of the "internalized" descriptors that + we create from those in a file. + */ + struct { + unsigned int stub_type : 4; /* 0..3 */ + unsigned int padding : 28; /* 4..31 */ + } stub_unwind; +}; + +/* HP linkers also generate unwinds for various linker-generated stubs. + GDB reads in the stubs from the $UNWIND_END$ subspace, then + "converts" them into normal unwind entries using some of the reserved + fields to store the stub type. */ + +struct stub_unwind_entry +{ + /* The offset within the executable for the associated stub. */ + unsigned stub_offset; + + /* The type of stub this unwind entry describes. */ + char type; + + /* Unknown. Not needed by GDB at this time. */ + char prs_info; + + /* Length (in instructions) of the associated stub. */ + short stub_length; +}; + +/* Sizes (in bytes) of the native unwind entries. */ +#define UNWIND_ENTRY_SIZE 16 +#define STUB_UNWIND_ENTRY_SIZE 8 + +/* The gaps represent linker stubs used in MPE and space for future + expansion. */ +enum unwind_stub_types +{ + LONG_BRANCH = 1, + PARAMETER_RELOCATION = 2, + EXPORT = 10, + IMPORT = 11, +}; + +/* We use the objfile->obj_private pointer for two things: + * + * 1. An unwind table; + * + * 2. A pointer to any associated shared library object. + * + * #defines are used to help refer to these objects. + */ + +/* Info about the unwind table associated with an object file. + * + * This is hung off of the "objfile->obj_private" pointer, and + * is allocated in the objfile's psymbol obstack. This allows + * us to have unique unwind info for each executable and shared + * library that we are debugging. + */ +struct obj_unwind_info { + struct unwind_table_entry *table; /* Pointer to unwind info */ + struct unwind_table_entry *cache; /* Pointer to last entry we found */ + int last; /* Index of last entry */ +}; + +typedef struct obj_private_struct { + struct obj_unwind_info *unwind_info; /* a pointer */ + struct so_list *so_info; /* a pointer */ +} obj_private_data_t; + +#if 0 +extern void target_write_pc PARAMS ((CORE_ADDR, int)) +extern CORE_ADDR target_read_pc PARAMS ((int)); +extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *)); +#endif + +#define TARGET_READ_PC(pid) target_read_pc (pid) +extern CORE_ADDR target_read_pc PARAMS ((int)); + +#define TARGET_WRITE_PC(v,pid) target_write_pc (v,pid) +extern void target_write_pc PARAMS ((CORE_ADDR, int)); + +#define TARGET_READ_FP() target_read_fp (inferior_pid) +extern CORE_ADDR target_read_fp PARAMS ((int)); + +/* For a number of horrible reasons we may have to adjust the location + of variables on the stack. Ugh. */ +#define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR) + +extern int hpread_adjust_stack_address PARAMS ((CORE_ADDR)); + +/* If the current gcc for for this target does not produce correct debugging + information for float parameters, both prototyped and unprototyped, then + define this macro. This forces gdb to always assume that floats are + passed as doubles and then converted in the callee. + + For the pa, it appears that the debug info marks the parameters as + floats regardless of whether the function is prototyped, but the actual + values are passed as doubles for the non-prototyped case and floats for + the prototyped case. Thus we choose to make the non-prototyped case work + for C and break the prototyped case, since the non-prototyped case is + probably much more common. (FIXME). */ + +#define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c) diff --git a/gdb/config/pa/tm-hppab.h b/gdb/config/pa/tm-hppab.h new file mode 100644 index 0000000..1cd438d --- /dev/null +++ b/gdb/config/pa/tm-hppab.h @@ -0,0 +1,47 @@ +/* Parameters for execution on an HP PA-RISC machine running BSD, for GDB. + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). */ + +/* For BSD: + + The signal context structure pointer is always saved at the base + of the frame + 0x4. + + We get the PC & SP directly from the sigcontext structure itself. + For other registers we have to dive in a little deeper: + + The hardware save state pointer is at offset 0x10 within the + signal context structure. + + Within the hardware save state, registers are found in the same order + as the register numbers in GDB. */ + +#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \ +} + +#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \ +} + +#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ +{ \ + int i; \ + CORE_ADDR TMP; \ + TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + TMP = read_memory_integer (TMP + 0x10, 4); \ + for (i = 0; i < NUM_REGS; i++) \ + { \ + if (i == SP_REGNUM) \ + (FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \ + else \ + (FSR)->regs[i] = TMP + i * 4; \ + } \ +} + +/* It's mostly just the common stuff. */ +#include "pa/tm-hppa.h" diff --git a/gdb/config/pa/tm-hppah.h b/gdb/config/pa/tm-hppah.h new file mode 100644 index 0000000..a8f1166 --- /dev/null +++ b/gdb/config/pa/tm-hppah.h @@ -0,0 +1,79 @@ +/* Parameters for execution on an HP PA-RISC machine, running HPUX, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HPUX_SNAP1 +#define HPUX_SNAP2 + +#include "somsolib.h" + +/* Actually, for a PA running HPUX the kernel calls the signal handler + without an intermediate trampoline. Luckily the kernel always sets + the return pointer for the signal handler to point to _sigreturn. */ +#define IN_SIGTRAMP(pc, name) (name && STREQ ("_sigreturn", name)) + +/* For HPUX: + + The signal context structure pointer is always saved at the base + of the frame which "calls" the signal handler. We only want to find + the hardware save state structure, which lives 10 32bit words into + sigcontext structure. + + Within the hardware save state structure, registers are found in the + same order as the register numbers in GDB. + + At one time we peeked at %r31 rather than the PC queues to determine + what instruction took the fault. This was done on purpose, but I don't + remember why. Looking at the PC queues is really the right way, and + I don't remember why that didn't work when this code was originally + written. */ + +#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + (43 * 4) , 4); \ +} + +#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + (40 * 4), 4); \ +} + +#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ +{ \ + int i; \ + CORE_ADDR TMP; \ + TMP = (FRAME)->frame + (10 * 4); \ + for (i = 0; i < NUM_REGS; i++) \ + { \ + if (i == SP_REGNUM) \ + (FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \ + else \ + (FSR)->regs[i] = TMP + i * 4; \ + } \ +} + +/* For HP-UX on PA-RISC we have an implementation + for the exception handling target op (in hppa-tdep.c) */ +#define CHILD_ENABLE_EXCEPTION_CALLBACK +#define CHILD_GET_CURRENT_EXCEPTION_EVENT + +/* Mostly it's common to all HPPA's. */ +#include "pa/tm-hppa.h" diff --git a/gdb/config/pa/tm-hppao.h b/gdb/config/pa/tm-hppao.h new file mode 100644 index 0000000..7df4247 --- /dev/null +++ b/gdb/config/pa/tm-hppao.h @@ -0,0 +1,96 @@ +/* Parameters for execution on an HP PA-RISC machine running OSF1, for GDB. + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). */ + +/* Define offsets to access CPROC stack when it does not have + * a kernel thread. + */ +#define MACHINE_CPROC_SP_OFFSET 20 +#define MACHINE_CPROC_PC_OFFSET 16 +#define MACHINE_CPROC_FP_OFFSET 12 + +/* + * Software defined PSW masks. + */ +#define PSW_SS 0x10000000 /* Kernel managed single step */ + +/* Thread flavors used in re-setting the T bit. + * @@ this is also bad for cross debugging. + */ +#define TRACE_FLAVOR HP800_THREAD_STATE +#define TRACE_FLAVOR_SIZE HP800_THREAD_STATE_COUNT +#define TRACE_SET(x,state) \ + ((struct hp800_thread_state *)state)->cr22 |= PSW_SS +#define TRACE_CLEAR(x,state) \ + ((((struct hp800_thread_state *)state)->cr22 &= ~PSW_SS), 1) + +/* For OSF1 (Should be close if not identical to BSD, but I haven't + tested it yet): + + The signal context structure pointer is always saved at the base + of the frame + 0x4. + + We get the PC & SP directly from the sigcontext structure itself. + For other registers we have to dive in a little deeper: + + The hardware save state pointer is at offset 0x10 within the + signal context structure. + + Within the hardware save state, registers are found in the same order + as the register numbers in GDB. */ + +#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \ +} + +#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \ +} + +#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ +{ \ + int i; \ + CORE_ADDR TMP; \ + TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + TMP = read_memory_integer (TMP + 0x10, 4); \ + for (i = 0; i < NUM_REGS; i++) \ + { \ + if (i == SP_REGNUM) \ + (FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \ + else \ + (FSR)->regs[i] = TMP + i * 4; \ + } \ +} + +/* OSF1 does not need the pc space queue restored. */ +#define NO_PC_SPACE_QUEUE_RESTORE + +/* The mach kernel uses the recovery counter to implement single + stepping. While this greatly simplifies the kernel support + necessary for single stepping, it unfortunately does the wrong + thing in the presense of a nullified instruction (gives control + back two insns after the nullifed insn). This is an artifact + of the HP architecture (recovery counter doesn't tick for + nullified insns). + + Do our best to avoid losing in such situations. */ +#define INSTRUCTION_NULLIFIED \ +(({ \ + int ipsw = (int)read_register(IPSW_REGNUM); \ + if (ipsw & PSW_N) \ + { \ + int pcoqt = (int)read_register(PCOQ_TAIL_REGNUM); \ + write_register(PCOQ_HEAD_REGNUM, pcoqt); \ + write_register(PCOQ_TAIL_REGNUM, pcoqt + 0x4); \ + write_register(IPSW_REGNUM, ipsw & ~(PSW_N | PSW_B | PSW_X)); \ + stop_pc = pcoqt; \ + } \ + }), 0) + +/* It's mostly just the common stuff. */ + +#include "pa/tm-hppa.h" diff --git a/gdb/config/pa/tm-pro.h b/gdb/config/pa/tm-pro.h new file mode 100644 index 0000000..05ecb62 --- /dev/null +++ b/gdb/config/pa/tm-pro.h @@ -0,0 +1,14 @@ +/* Parameters for execution on an HP PA-RISC level 0 embedded system. + This is based on tm-hppab.h. + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). */ + +#define PA_LEVEL_0 /* Disables touching space regs and fp */ + +/* All the PRO targets use software floating point at the moment. */ +#define SOFT_FLOAT 1 + +/* It's mostly just the common stuff. */ +#include "pa/tm-hppa.h" + +#define GDB_TARGET_IS_PA_ELF diff --git a/gdb/config/pa/xm-hppab.h b/gdb/config/pa/xm-hppab.h new file mode 100644 index 0000000..9f6467f --- /dev/null +++ b/gdb/config/pa/xm-hppab.h @@ -0,0 +1,27 @@ +/* Parameters for hosting on an HPPA PA-RISC machine, running BSD, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is a big-endian host. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include "pa/xm-pa.h" diff --git a/gdb/config/pa/xm-hppah.h b/gdb/config/pa/xm-hppah.h new file mode 100644 index 0000000..2cd47dd --- /dev/null +++ b/gdb/config/pa/xm-hppah.h @@ -0,0 +1,49 @@ +/* Parameters for hosting on an HPPA-RISC machine running HPUX, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Host is big-endian. */ +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include "pa/xm-pa.h" + +#define USG + +#ifndef __STDC__ +/* This define is discussed in decode_line_1 in symtab.c */ +#define HPPA_COMPILER_BUG +#endif + +#define HAVE_TERMIOS + +/* HP defines malloc and realloc as returning void *, even for non-ANSI + compilations (such as with the native compiler). */ + +#define MALLOC_INCOMPATIBLE + +extern void * +malloc PARAMS ((size_t)); + +extern void * +realloc PARAMS ((void *, size_t)); + +extern void +free PARAMS ((void *)); diff --git a/gdb/config/pa/xm-pa.h b/gdb/config/pa/xm-pa.h new file mode 100644 index 0000000..979609d --- /dev/null +++ b/gdb/config/pa/xm-pa.h @@ -0,0 +1,5 @@ +/* Definitions for all PA machines. */ + +/* This was created for "makeva", which is obsolete. This file can + probably go away (unless someone can think of some other host thing + which is common to various pa machines). */ diff --git a/gdb/config/powerpc/aix.mh b/gdb/config/powerpc/aix.mh new file mode 100644 index 0000000..bac3e30 --- /dev/null +++ b/gdb/config/powerpc/aix.mh @@ -0,0 +1,11 @@ +# Host: IBM PowerPC running AIX + +XM_FILE= xm-aix.h +XDEPFILES= + +NAT_FILE= nm-aix.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o xcoffread.o + +# When compiled with cc, for debugging, this argument should be passed. +# We have no idea who our current compiler is though, so we skip it. +# MH_CFLAGS = -bnodelcsect diff --git a/gdb/config/powerpc/aix.mt b/gdb/config/powerpc/aix.mt new file mode 100644 index 0000000..6d03b7d --- /dev/null +++ b/gdb/config/powerpc/aix.mt @@ -0,0 +1,3 @@ +# Target: PowerPC running AIX +TDEPFILES= rs6000-tdep.o xcoffsolib.o +TM_FILE= tm-ppc-aix.h diff --git a/gdb/config/powerpc/cygwin.mh b/gdb/config/powerpc/cygwin.mh new file mode 100644 index 0000000..0c25709 --- /dev/null +++ b/gdb/config/powerpc/cygwin.mh @@ -0,0 +1,5 @@ +MH_CFLAGS= +XM_FILE=xm-cygwin.h +XDEP_FILES=ser-tcp.o +NATDEPFILES=win32-nat.o +XM_CLIBS=-lkernel32 diff --git a/gdb/config/powerpc/cygwin.mt b/gdb/config/powerpc/cygwin.mt new file mode 100644 index 0000000..b86b2af --- /dev/null +++ b/gdb/config/powerpc/cygwin.mt @@ -0,0 +1,6 @@ +# Target: Powerpc running cygnus's unix api over win32 +TDEPFILES= rs6000-tdep.o +TM_FILE= tm-cygwin.h + + + diff --git a/gdb/config/powerpc/gdbserve.mt b/gdb/config/powerpc/gdbserve.mt new file mode 100644 index 0000000..7728407 --- /dev/null +++ b/gdb/config/powerpc/gdbserve.mt @@ -0,0 +1,3 @@ +# Target: GDBSERVE.NLM running on a Power-PC +TDEPFILES= ppc.o +CPU_FILE= ppc diff --git a/gdb/config/powerpc/linux.mh b/gdb/config/powerpc/linux.mh new file mode 100644 index 0000000..0de0e20 --- /dev/null +++ b/gdb/config/powerpc/linux.mh @@ -0,0 +1,10 @@ +# Host: PowerPC, running Linux + +XM_FILE= xm-linux.h +XDEPFILES= ser-tcp.o +XM_CLIBS= + +NAT_FILE= ../nm-sysv4.h +NATDEPFILES= solib.o corelow.o # infptrace.o inftarg.o fork-child.o core-aout.o core-regset.o + +GDBSERVER_DEPFILES= low-linux.o diff --git a/gdb/config/powerpc/macos.mh b/gdb/config/powerpc/macos.mh new file mode 100644 index 0000000..63b0648 --- /dev/null +++ b/gdb/config/powerpc/macos.mh @@ -0,0 +1,4 @@ +# Host: PowerMac (PowerPC running MacOS) + +NATDEPFILES= mac-nat.o +NAT_FILE= nm-macos.h diff --git a/gdb/config/powerpc/macos.mt b/gdb/config/powerpc/macos.mt new file mode 100644 index 0000000..07ad0d2 --- /dev/null +++ b/gdb/config/powerpc/macos.mt @@ -0,0 +1,3 @@ +# Target: PowerMac (PowerPC running MacOS) +TDEPFILES= rs6000-tdep.o xcoffread.o +TM_FILE= tm-macos.h diff --git a/gdb/config/powerpc/nm-aix.h b/gdb/config/powerpc/nm-aix.h new file mode 100644 index 0000000..9661d50 --- /dev/null +++ b/gdb/config/powerpc/nm-aix.h @@ -0,0 +1,22 @@ +/* IBM PowerPC native-dependent macros for GDB, the GNU debugger. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include "rs6000/nm-rs6000.h" + +#define PTRACE_ARG3_TYPE int* diff --git a/gdb/config/powerpc/nm-macos.h b/gdb/config/powerpc/nm-macos.h new file mode 100644 index 0000000..a1a3d9e --- /dev/null +++ b/gdb/config/powerpc/nm-macos.h @@ -0,0 +1,20 @@ +/* PowerMac native-dependent macros for GDB, the GNU debugger. + Copyright (C) 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Nothing needed, at least so far. */ diff --git a/gdb/config/powerpc/nm-solaris.h b/gdb/config/powerpc/nm-solaris.h new file mode 100644 index 0000000..b276a71 --- /dev/null +++ b/gdb/config/powerpc/nm-solaris.h @@ -0,0 +1,30 @@ +/* Native-dependent definitions for PowerPC running Solaris. + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include the generic SVR4 definitions. */ + +#include <nm-sysv4.h> + +/* Before storing, we need to read all the registers. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Solaris PSRVADDR support does not seem to include a place for nPC. */ + +#define PRSVADDR_BROKEN diff --git a/gdb/config/powerpc/ppc-eabi.mt b/gdb/config/powerpc/ppc-eabi.mt new file mode 100644 index 0000000..c4e21c8 --- /dev/null +++ b/gdb/config/powerpc/ppc-eabi.mt @@ -0,0 +1,3 @@ +# Target: PowerPC running eabi +TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-bdm.o ocd.o remote-sds.o +TM_FILE= tm-ppc-eabi.h diff --git a/gdb/config/powerpc/ppc-nw.mt b/gdb/config/powerpc/ppc-nw.mt new file mode 100644 index 0000000..0eaa23d --- /dev/null +++ b/gdb/config/powerpc/ppc-nw.mt @@ -0,0 +1,3 @@ +# Target: PowerPC running Netware +TDEPFILES= rs6000-tdep.o +TM_FILE= tm-ppc-nw.h diff --git a/gdb/config/powerpc/ppc-sim.mt b/gdb/config/powerpc/ppc-sim.mt new file mode 100644 index 0000000..c73fef2 --- /dev/null +++ b/gdb/config/powerpc/ppc-sim.mt @@ -0,0 +1,6 @@ +# Target: PowerPC running eabi and including the simulator +TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-bdm.o ocd.o remote-sds.o +TM_FILE= tm-ppc-eabi.h + +SIM_OBS = remote-sim.o +SIM = ../sim/ppc/libsim.a diff --git a/gdb/config/powerpc/ppcle-eabi.mt b/gdb/config/powerpc/ppcle-eabi.mt new file mode 100644 index 0000000..b336a11 --- /dev/null +++ b/gdb/config/powerpc/ppcle-eabi.mt @@ -0,0 +1,3 @@ +# Target: PowerPC running eabi in little endian mode +TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o ocd.o +TM_FILE= tm-ppcle-eabi.h diff --git a/gdb/config/powerpc/ppcle-sim.mt b/gdb/config/powerpc/ppcle-sim.mt new file mode 100644 index 0000000..f08dafe --- /dev/null +++ b/gdb/config/powerpc/ppcle-sim.mt @@ -0,0 +1,6 @@ +# Target: PowerPC running eabi in little endian mode under the simulator +TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o ocd.o +TM_FILE= tm-ppcle-eabi.h + +SIM_OBS = remote-sim.o +SIM = ../sim/ppc/libsim.a diff --git a/gdb/config/powerpc/solaris.mh b/gdb/config/powerpc/solaris.mh new file mode 100644 index 0000000..7d3444e --- /dev/null +++ b/gdb/config/powerpc/solaris.mh @@ -0,0 +1,18 @@ +# Host: PowerPC, running Solaris 2 + +XM_FILE= xm-solaris.h +XDEPFILES= ser-tcp.o +XM_CLIBS= -lsocket -lnsl + +NAT_FILE= nm-solaris.h +NATDEPFILES= corelow.o core-sol2.o solib.o procfs.o fork-child.o + +# If you are compiling with Sun's compiler, add the -xs option to CC +# (e.g. `make CC="cc -xs"'). +# Sun's compilers require the -xs option to produce debug information +# in the final linked executable. Otherwise they leave it in the .o +# files only, with undocumented pointers to it in the linked executable. +# This is commented out because we don't assume that the Sun compiler +# is in use. +#MH_CFLAGS=-xs +HOST_IPC=-DBSD_IPC diff --git a/gdb/config/powerpc/solaris.mt b/gdb/config/powerpc/solaris.mt new file mode 100644 index 0000000..a6e421e --- /dev/null +++ b/gdb/config/powerpc/solaris.mt @@ -0,0 +1,3 @@ +# Target: PowerPC, running Solaris 2 +TDEPFILES= rs6000-tdep.o +TM_FILE= tm-solaris.h diff --git a/gdb/config/powerpc/tm-cygwin.h b/gdb/config/powerpc/tm-cygwin.h new file mode 100644 index 0000000..27ae24a --- /dev/null +++ b/gdb/config/powerpc/tm-cygwin.h @@ -0,0 +1,21 @@ +/* Macro definitions PowerPC running under the Cygwin API. + Copyright 1996 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "powerpc/tm-ppcle-eabi.h" + diff --git a/gdb/config/powerpc/tm-macos.h b/gdb/config/powerpc/tm-macos.h new file mode 100644 index 0000000..b29d285 --- /dev/null +++ b/gdb/config/powerpc/tm-macos.h @@ -0,0 +1,26 @@ +/* Macro definitions for Power PC running MacOS. + Copyright (C) 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" + +#define GDB_TARGET_POWERPC + +/* This is no use to us. */ +#undef PC_LOAD_SEGMENT diff --git a/gdb/config/powerpc/tm-ppc-aix.h b/gdb/config/powerpc/tm-ppc-aix.h new file mode 100644 index 0000000..5dfb3c4 --- /dev/null +++ b/gdb/config/powerpc/tm-ppc-aix.h @@ -0,0 +1,28 @@ +/* Macro definitions for Power PC running AIX. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef TM_PPC_AIX_H +#define TM_PPC_AIX_H + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" + +#define GDB_TARGET_POWERPC + +#endif /* TM_PPC_AIX_H */ diff --git a/gdb/config/powerpc/tm-ppc-eabi.h b/gdb/config/powerpc/tm-ppc-eabi.h new file mode 100644 index 0000000..c2828b2 --- /dev/null +++ b/gdb/config/powerpc/tm-ppc-eabi.h @@ -0,0 +1,84 @@ +/* Macro definitions for Power PC running embedded ABI. + Copyright 1995, 1996, 1997 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PPC_EABI_H +#define TM_PPC_EABI_H + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" +/* except we want to allow single stepping */ +#undef SOFTWARE_SINGLE_STEP_P +#define SOFTWARE_SINGLE_STEP_P 0 + +#undef DEFAULT_LR_SAVE +#define DEFAULT_LR_SAVE 4 /* eabi saves LR at 4 off of SP */ + +#define GDB_TARGET_POWERPC + +#undef PC_LOAD_SEGMENT +#undef PROCESS_LINENUMBER_HOOK + +#undef TEXT_SEGMENT_BASE +#define TEXT_SEGMENT_BASE 1 + +/* Say that we're using ELF, not XCOFF. */ +#define ELF_OBJECT_FORMAT 1 + +#define TARGET_BYTE_ORDER_SELECTABLE_P 1 + +/* return true if a given `pc' value is in `call dummy' function. */ +/* FIXME: This just checks for the end of the stack, which is broken + for things like stepping through gcc nested function stubs. */ +#undef PC_IN_CALL_DUMMY +#define PC_IN_CALL_DUMMY(STOP_PC, STOP_SP, STOP_FRAME_ADDR) \ + (STOP_SP < STOP_PC) + +/* generic dummy frame stuff */ + + + +/* target-specific dummy_frame stuff */ + +extern struct frame_info *rs6000_pop_frame PARAMS ((struct frame_info *frame)); + +extern CORE_ADDR ppc_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +extern CORE_ADDR rs6000_push_arguments PARAMS ((int nargs, + struct value **args, + CORE_ADDR sp, + unsigned char struct_return, + CORE_ADDR struct_addr)); + +#undef PUSH_DUMMY_FRAME +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +#define PUSH_RETURN_ADDRESS(PC, SP) ppc_push_return_address (PC, SP) + +/* override the standard get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define CALL_DUMMY_ADDRESS() entry_point_address () +#undef CALL_DUMMY_START_OFFSET +#define CALL_DUMMY_START_OFFSET 0 + + +#endif /* TM_PPC_EABI_H */ diff --git a/gdb/config/powerpc/tm-ppc-nw.h b/gdb/config/powerpc/tm-ppc-nw.h new file mode 100644 index 0000000..38f7211 --- /dev/null +++ b/gdb/config/powerpc/tm-ppc-nw.h @@ -0,0 +1,31 @@ +/* Macro definitions for Power PC running Netware. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PPC_NW_H +#define TM_PPC_NW_H + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" + +#define GDB_TARGET_POWERPC + +#undef PC_LOAD_SEGMENT +#undef PROCESS_LINENUMBER_HOOK + +#endif /* TM_PPC_NW_H */ diff --git a/gdb/config/powerpc/tm-ppc-sim.h b/gdb/config/powerpc/tm-ppc-sim.h new file mode 100644 index 0000000..e4116bc --- /dev/null +++ b/gdb/config/powerpc/tm-ppc-sim.h @@ -0,0 +1,26 @@ +/* Macro definitions for Power PC running embedded ABI under the simulator. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PPC_SIM_H +#define TM_PPC_SIM_H + +#include "powerpc/tm-ppc-eabi.h" + +#endif /* TM_PPC_SIM_H */ + diff --git a/gdb/config/powerpc/tm-ppcle-eabi.h b/gdb/config/powerpc/tm-ppcle-eabi.h new file mode 100644 index 0000000..355195d --- /dev/null +++ b/gdb/config/powerpc/tm-ppcle-eabi.h @@ -0,0 +1,30 @@ +/* Macro definitions for Power PC running embedded ABI + in little endian mode. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PPCLE_EABI_H +#define TM_PPCLE_EABI_H + +/* Use normal ppc-eabi definitions */ +#include "powerpc/tm-ppc-eabi.h" + +#undef TARGET_BYTE_ORDER_DEFAULT +#define TARGET_BYTE_ORDER_DEFAULT LITTLE_ENDIAN + +#endif /* TM_PPCLE_EABI_H */ diff --git a/gdb/config/powerpc/tm-ppcle-sim.h b/gdb/config/powerpc/tm-ppcle-sim.h new file mode 100644 index 0000000..76564f2 --- /dev/null +++ b/gdb/config/powerpc/tm-ppcle-sim.h @@ -0,0 +1,26 @@ +/* Macro definitions for Power PC running embedded ABI under the simulator. + Copyright 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_PPCLE_SIM_H +#define TM_PPCLE_SIM_H + +#include "powerpc/tm-ppcle-eabi.h" + +#endif /* TM_PPCLE_SIM_H */ + diff --git a/gdb/config/powerpc/tm-solaris.h b/gdb/config/powerpc/tm-solaris.h new file mode 100644 index 0000000..bd9373f --- /dev/null +++ b/gdb/config/powerpc/tm-solaris.h @@ -0,0 +1,74 @@ +/* Macro definitions for GDB for a PowerPC running Solaris 2 + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "powerpc/tm-ppc-eabi.h" + +/* There are two different signal handler trampolines in Solaris2. */ +#define IN_SIGTRAMP(pc, name) \ + ((name) \ + && (STREQ ("sigacthandler", name) || STREQ ("ucbsigvechandler", name))) + +/* The signal handler gets a pointer to an ucontext as third argument + if it is called from sigacthandler. This is the offset to the saved + PC within it. sparc_frame_saved_pc knows how to deal with + ucbsigvechandler. */ +#define SIGCONTEXT_PC_OFFSET 44 + +#if 0 /* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */ + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +#endif /* 0 */ + +/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols, + and for SunPRO 3.0, N_FUN symbols too. */ +#define SOFUN_ADDRESS_MAYBE_MISSING + +#if 0 +extern char *sunpro_static_transform_name PARAMS ((char *)); +#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x) +#endif + +#define FAULTED_USE_SIGINFO + +/* Enable handling of shared libraries for a.out executables. */ +#define HANDLE_SVR4_EXEC_EMULATORS diff --git a/gdb/config/powerpc/xm-aix.h b/gdb/config/powerpc/xm-aix.h new file mode 100644 index 0000000..efd0e74 --- /dev/null +++ b/gdb/config/powerpc/xm-aix.h @@ -0,0 +1,30 @@ +/* Parameters for hosting on an PowerPC, for GDB, the GNU debugger. + Copyright 1995 Free Software Foundation, Inc. + Contributed by Cygnus Corporation. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include "xm-aix4.h" + +/* This doesn't seem to be declared in any header file I can find. */ +char *termdef PARAMS ((int, int)); + +/* UINT_MAX is defined in <sys/limits.h> as a decimal constant (4294967295) + which is too large to fit in a signed int when it is parsed by the + compiler, so it issues a diagnostic. Just undef it here so that we + use gdb's version in defs.h */ +#undef UINT_MAX diff --git a/gdb/config/powerpc/xm-cygwin.h b/gdb/config/powerpc/xm-cygwin.h new file mode 100644 index 0000000..82aa0fb --- /dev/null +++ b/gdb/config/powerpc/xm-cygwin.h @@ -0,0 +1,32 @@ +/* Definitions for hosting on WIN32, for GDB. + Copyright 1995, 1996, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +#include "fopen-bin.h" + +#define GDBINIT_FILENAME "gdb.ini" + +#define SLASH_P(X) ((X)=='\\' || (X) == '/') +#define ROOTED_P(X) ((SLASH_P((X)[0]))|| ((X)[1] ==':')) +#define SLASH_CHAR '/' +#define SLASH_STRING "/" + +/* Define this lseek(n) != nth byte of file */ +#define LSEEK_NOT_LINEAR diff --git a/gdb/config/powerpc/xm-linux.h b/gdb/config/powerpc/xm-linux.h new file mode 100644 index 0000000..41c8ba7 --- /dev/null +++ b/gdb/config/powerpc/xm-linux.h @@ -0,0 +1,21 @@ +/* Host definitions for a Sun 4, for GDB, the GNU debugger. + Copyright 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN diff --git a/gdb/config/powerpc/xm-mpw.h b/gdb/config/powerpc/xm-mpw.h new file mode 100644 index 0000000..6b33ca2 --- /dev/null +++ b/gdb/config/powerpc/xm-mpw.h @@ -0,0 +1,22 @@ +/* Macro definitions for running GDB on Apple Power Macintoshes. + Copyright (C) 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include <xm-mpw.h> diff --git a/gdb/config/powerpc/xm-solaris.h b/gdb/config/powerpc/xm-solaris.h new file mode 100644 index 0000000..9ead87a --- /dev/null +++ b/gdb/config/powerpc/xm-solaris.h @@ -0,0 +1,21 @@ +/* Host definitions for a Sun 4, for GDB, the GNU debugger. + Copyright 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN diff --git a/gdb/config/pyr/pyramid.mh b/gdb/config/pyr/pyramid.mh new file mode 100644 index 0000000..cd25e57 --- /dev/null +++ b/gdb/config/pyr/pyramid.mh @@ -0,0 +1,8 @@ +# Host: Pyramid under OSx 4.0 (4.2bsd). + +#msg If you don't compile GDB with GCC, you'll need to add +#msg ALLOCA=alloca.o and ALLOCA1=alloca.o to the Makefile. +#msg + +XDEPFILES= pyr-xdep.o infptrace.o inftarg.o fork-child.o +XM_FILE= xm-pyr.h diff --git a/gdb/config/pyr/pyramid.mt b/gdb/config/pyr/pyramid.mt new file mode 100644 index 0000000..48f9557 --- /dev/null +++ b/gdb/config/pyr/pyramid.mt @@ -0,0 +1,3 @@ +# Target: Pyramid under OSx 4.0 (4.2bsd). +TDEPFILES= pyr-tdep.o +TM_FILE= tm-pyr.h diff --git a/gdb/config/pyr/tm-pyr.h b/gdb/config/pyr/tm-pyr.h new file mode 100644 index 0000000..b97ebe7 --- /dev/null +++ b/gdb/config/pyr/tm-pyr.h @@ -0,0 +1,483 @@ +/* Definitions to make GDB run on a Pyramid under OSx 4.0 (4.2bsd). + Copyright 1988, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Traditional Unix virtual address spaces have thre regions: text, + data and stack. The text, initialised data, and uninitialised data + are represented in separate segments of the a.out file. + When a process dumps core, the data and stack regions are written + to a core file. This gives a debugger enough information to + reconstruct (and debug) the virtual address space at the time of + the coredump. + Pyramids have an distinct fourth region of the virtual address + space, in which the contents of the windowed registers are stacked + in fixed-size frames. Pyramid refer to this region as the control + stack. Each call (or trap) automatically allocates a new register + frame; each return deallocates the current frame and restores the + windowed registers to their values before the call. + + When dumping core, the control stack is written to a core files as + a third segment. The core-handling functions need to know to deal + with it. */ + +/* Tell corefile.c there is an extra segment. */ +#define REG_STACK_SEGMENT + +/* Floating point is IEEE compatible on most Pyramid hardware + (Older processors do not have IEEE NaNs). */ +#define IEEE_FLOAT + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +/* FIXME -- do we want to skip insns to allocate the local frame? + If so, what do they look like? + This is becoming harder, since tege@sics.SE wants to change + gcc to not output a prologue when no frame is needed. */ +#define SKIP_PROLOGUE(pc) do {} while (0) + + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame) + +/* Address of end of stack space. */ +/* This seems to be right for the 90x comp.vuw.ac.nz. + The correct value at any site may be a function of the configured + maximum control stack depth. If so, I don't know where the + control-stack depth is configured, so I can't #include it here. */ +#define STACK_END_ADDR (0xc00cc000) + +/* Register window stack (Control stack) stack definitions + - Address of beginning of control stack. + - size of control stack frame + (Note that since crts0 is usually the first function called, + main()'s control stack is one frame (0x80 bytes) beyond this value. */ + +#define CONTROL_STACK_ADDR (0xc00cd000) + +/* Bytes in a register window -- 16 parameter regs, 16 local regs + for each call, is 32 regs * 4 bytes */ + +#define CONTROL_STACK_FRAME_SIZE (32*4) + +/* FIXME. On a pyr, Data Stack grows downward; control stack goes upwards. + Which direction should we use for INNER_THAN, PC_INNER_THAN ?? */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Stack must be aligned on 32-bit boundaries when synthesizing + function calls. */ + +#define STACK_ALIGN(ADDR) (((ADDR) + 3) & -4) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0xf0, 00, 00, 00} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ +/* pyramids have 64, plus one for the PSW; plus perhaps one more for the + kernel stack pointer (ksp) and control-stack pointer (CSP) */ + +#define NUM_REGS 67 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES \ +{"gr0", "gr1", "gr2", "gr3", "gr4", "gr5", "gr6", "gr7", \ + "gr8", "gr9", "gr10", "gr11", "logpsw", "cfp", "sp", "pc", \ + "pr0", "pr1", "pr2", "pr3", "pr4", "pr5", "pr6", "pr7", \ + "pr8", "pr9", "pr10", "pr11", "pr12", "pr13", "pr14", "pr15", \ + "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", \ + "lr8", "lr9", "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", \ + "tr0", "tr1", "tr2", "tr3", "tr4", "tr5", "tr6", "tr7", \ + "tr8", "tr9", "tr10", "tr11", "tr12", "tr13", "tr14", "tr15", \ + "psw", "ksp", "csp"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +/* pseudo-registers: */ +#define PS_REGNUM 64 /* Contains processor status */ +#define PSW_REGNUM 64 /* Contains current psw, whatever it is.*/ +#define CSP_REGNUM 65 /* address of this control stack frame*/ +#define KSP_REGNUM 66 /* Contains process's Kernel Stack Pointer */ + +#define CFP_REGNUM 13 /* Current data-stack frame ptr */ +#define TR0_REGNUM 48 /* After function call, contains + function result */ + +/* Registers interesting to the machine-independent part of gdb*/ + +#define FP_REGNUM CSP_REGNUM /* Contains address of executing (control) + stack frame */ +#define SP_REGNUM 14 /* Contains address of top of stack -??*/ +#define PC_REGNUM 15 /* Contains program counter */ + +/* Define DO_REGISTERS_INFO() to do machine-specific formatting + of register dumps. */ + +#define DO_REGISTERS_INFO(_regnum, fp) pyr_do_registers_info(_regnum, fp) + +/* need this so we can find the global registers: they never get saved. */ +extern unsigned int global_reg_offset; +extern unsigned int last_frame_offset; + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS*4) + +/* the Pyramid has register windows. */ + +#define HAVE_REGISTER_WINDOWS + +/* Is this register part of the register window system? A yes answer + implies that 1) The name of this register will not be the same in + other frames, and 2) This register is automatically "saved" (out + registers shifting into ins counts) upon subroutine calls and thus + there is no need to search more than one stack frame for it. */ + +#define REGISTER_IN_WINDOW_P(regnum) \ + ((regnum) >= 16 && (regnum) < 64) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the Pyramid, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) 4 + +/* Number of bytes of storage in the program's representation + for register N. On the Pyramid, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) 4 + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int + +/* FIXME: It seems impossible for both EXTRACT_RETURN_VALUE and + STORE_RETURN_VALUE to be correct. */ + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +/****FIXME****/ +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (TR0_REGNUM, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +/* Note that on a register-windowing machine (eg, Pyr, SPARC), this is + where the value is found after the function call -- ie, it should + correspond to GNU CC's FUNCTION_VALUE rather than FUNCTION_OUTGOING_VALUE.*/ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, ((int *)(REGBUF))+TR0_REGNUM, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ +/* on pyrs, values are returned in */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE(TR0_REGNUM), VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ +/* FIXME */ +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + ( ((int *)(REGBUF)) [TR0_REGNUM]) + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR bottom; \ + CORE_ADDR frame_cfp; \ + CORE_ADDR frame_window_addr; + +/* The bottom field is misnamed, since it might imply that memory from + bottom to frame contains this frame. That need not be true if + stack frames are allocated in different segments (e.g. some on a + stack, some on a heap in the data segment). */ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) \ +do { \ + (fci)->frame_window_addr = (fci)->frame; \ + (fci)->bottom = \ + ((fci)->next ? \ + ((fci)->frame == (fci)->next->frame ? \ + (fci)->next->bottom : (fci)->next->frame) : \ + read_register (SP_REGNUM)); \ + (fci)->frame_cfp = \ + read_register (CFP_REGNUM); \ + /***fprintf (stderr, \ + "[[creating new frame for %0x,pc=%0x,csp=%0x]]\n", \ + (fci)->frame, (fci)->pc,(fci)->frame_cfp);*/ \ +} while (0); + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the pyr, the frame's nominal address is the address + of parameter register 0. The previous frame is found 32 words up. */ + +#define FRAME_CHAIN(thisframe) \ + ( (thisframe) -> frame - CONTROL_STACK_FRAME_SIZE) + + /*((thisframe) >= CONTROL_STACK_ADDR))*/ + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. + + I do not understand what this means on a Pyramid, where functions + *always* have a control-stack frame, but may or may not have a + frame on the data stack. Since GBD uses the value of the + control stack pointer as its "address" of a frame, FRAMELESS + is always 1, so does not need to be defined. */ + + +/* Where is the PC for a specific frame */ + +#define FRAME_SAVED_PC(fi) \ + ((CORE_ADDR) (read_memory_integer ( (fi) -> frame + 60, 4))) + +/* There may be bugs in FRAME_ARGS_ADDRESS and FRAME_LOCALS_ADDRESS; + or there may be bugs in accessing the registers that break + their definitions. + Having the macros expand into functions makes them easier to debug. + When the bug is finally located, the inline macro defintions can + be un-#if 0ed, and frame_args_addr and frame_locals_address can + be deleted from pyr-dep.c */ + +/* If the argument is on the stack, it will be here. */ +#define FRAME_ARGS_ADDRESS(fi) \ + frame_args_addr(fi) + +#define FRAME_LOCALS_ADDRESS(fi) \ + frame_locals_address(fi) + +/* The following definitions doesn't seem to work. + I don't understand why. */ +#if 0 +#define FRAME_ARGS_ADDRESS(fi) \ + /*(FRAME_FP(fi) + (13*4))*/ (read_register (CFP_REGNUM)) + +#define FRAME_LOCALS_ADDRESS(fi) \ + ((fi)->frame +(16*4)) + +#endif /* 0 */ + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(val, fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. + + Note that on register window machines, we are currently making the + assumption that window registers are being saved somewhere in the + frame in which they are being used. If they are stored in an + inferior frame, find_saved_register will break. + + On pyrs, frames of window registers are stored contiguously on a + separate stack. All window registers are always stored. + The pc and psw (gr15 and gr14) are also always saved: the call + insn saves them in pr15 and pr14 of the new frame (tr15,tr14 of the + old frame). + The data-stack frame pointer (CFP) is only saved in functions which + allocate a (data)stack frame (with "adsf"). We detect them by + looking at the first insn of the procedure. + + Other non-window registers (gr0-gr11) are never saved. Pyramid's C + compiler and gcc currently ignore them, so it's not an issue. */ + +#define FRAME_FIND_SAVED_REGS(fi_p, frame_saved_regs) \ +{ register int regnum; \ + register CORE_ADDR pc; \ + register CORE_ADDR fn_start_pc; \ + register int first_insn; \ + register CORE_ADDR prev_cf_addr; \ + register int window_ptr; \ + if (!fi_p) fatal ("Bad frame info struct in FRAME_FIND_SAVED_REGS"); \ + memset (&(frame_saved_regs), '\0', sizeof (frame_saved_regs)); \ + \ + window_ptr = prev_cf_addr = FRAME_FP(fi_p); \ + \ + for (regnum = 16 ; regnum < 64; regnum++,window_ptr+=4) \ + { \ + (frame_saved_regs).regs[regnum] = window_ptr; \ + } \ + \ + /* In each window, psw, and pc are "saved" in tr14,tr15. */ \ + /*** psw is sometimes saved in gr12 (so sez <sys/pcb.h>) */ \ + (frame_saved_regs).regs[PS_REGNUM] = FRAME_FP(fi_p) + (14*4); \ + \ +/*(frame_saved_regs).regs[PC_REGNUM] = (frame_saved_regs).regs[31];*/ \ + (frame_saved_regs).regs[PC_REGNUM] = FRAME_FP(fi_p) + ((15+32)*4); \ + \ + /* Functions that allocate a frame save sp *where*? */ \ +/*first_insn = read_memory_integer (get_pc_function_start ((fi_p)->pc),4); */ \ + \ + fn_start_pc = (get_pc_function_start ((fi_p)->pc)); \ + first_insn = read_memory_integer(fn_start_pc, 4); \ + \ + if (0x08 == ((first_insn >> 20) &0x0ff)) { \ + /* NB: because WINDOW_REGISTER_P(cfp) is false, a saved cfp \ + in this frame is only visible in this frame's callers. \ + That means the cfp we mark saved is my caller's cfp, ie pr13. \ + I don't understand why we don't have to do that for pc, too. */ \ + \ + (frame_saved_regs).regs[CFP_REGNUM] = FRAME_FP(fi_p)+(13*4); \ + \ + (frame_saved_regs).regs[SP_REGNUM] = \ + read_memory_integer (FRAME_FP(fi_p)+((13+32)*4),4); \ + } \ + \ +/* \ + *(frame_saved_regs).regs[CFP_REGNUM] = (frame_saved_regs).regs[61]; \ + * (frame_saved_regs).regs[SP_REGNUM] = \ + * read_memory_integer (FRAME_FP(fi_p)+((13+32)*4),4); \ + */ \ + \ + (frame_saved_regs).regs[CSP_REGNUM] = prev_cf_addr; \ +} + +/* Things needed for making the inferior call functions. */ +#if 0 +/* These are all lies. These macro definitions are appropriate for a + SPARC. On a pyramid, pushing a dummy frame will + surely involve writing the control stack pointer, + then saving the pc. This requires a privileged instruction. + Maybe one day Pyramid can be persuaded to add a syscall to do this. + Until then, we are out of luck. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM);\ + register int regnum; \ + sp = push_word (sp, 0); /* arglist */ \ + for (regnum = 11; regnum >= 0; regnum--) \ + sp = push_word (sp, read_register (regnum)); \ + sp = push_word (sp, read_register (PC_REGNUM)); \ + sp = push_word (sp, read_register (FP_REGNUM)); \ +/* sp = push_word (sp, read_register (AP_REGNUM));*/ \ + sp = push_word (sp, (read_register (PS_REGNUM) & 0xffef) \ + + 0x2fff0000); \ + sp = push_word (sp, 0); \ + write_register (SP_REGNUM, sp); \ + write_register (FP_REGNUM, sp); \ +/* write_register (AP_REGNUM, sp + 17 * sizeof (int));*/ } + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ +{ register CORE_ADDR fp = read_register (FP_REGNUM); \ + register int regnum; \ + register int regmask = read_memory_integer (fp + 4, 4); \ + write_register (PS_REGNUM, \ + (regmask & 0xffff) \ + | (read_register (PS_REGNUM) & 0xffff0000)); \ + write_register (PC_REGNUM, read_memory_integer (fp + 16, 4)); \ + write_register (FP_REGNUM, read_memory_integer (fp + 12, 4)); \ +/* write_register (AP_REGNUM, read_memory_integer (fp + 8, 4));*/ \ + fp += 16; \ + for (regnum = 0; regnum < 12; regnum++) \ + if (regmask & (0x10000 << regnum)) \ + write_register (regnum, read_memory_integer (fp += 4, 4)); \ + fp = fp + 4 + ((regmask >> 30) & 3); \ + if (regmask & 0x20000000) \ + { regnum = read_memory_integer (fp, 4); \ + fp += (regnum + 1) * 4; } \ + write_register (SP_REGNUM, fp); \ + set_current_frame (read_register (FP_REGNUM)); } + +/* This sequence of words is the instructions + calls #69, @#32323232 + bpt + Note this is 8 bytes. */ + +#define CALL_DUMMY {0x329f69fb, 0x03323232} + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ *((char *) dummyname + 1) = nargs; \ + *(int *)((char *) dummyname + 3) = fun; } +#endif /* 0 */ + +#define POP_FRAME \ + { error ("The return command is not supported on this machine."); } diff --git a/gdb/config/pyr/xm-pyr.h b/gdb/config/pyr/xm-pyr.h new file mode 100644 index 0000000..f45d10a --- /dev/null +++ b/gdb/config/pyr/xm-pyr.h @@ -0,0 +1,92 @@ +/* Definitions to make GDB run on a Pyramidax under OSx 4.0 (4.2bsd). + Copyright 1988, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Define PYRAMID_CONTROL_FRAME_DEBUGGING to get copious messages + about reading the control stack on standard output. This + makes gdb unusable as a debugger. */ + +/* #define PYRAMID_CONTROL_FRAME_DEBUGGING */ + +/* Define PYRAMID_FRAME_DEBUGGING for ? */ + +/* use Pyramid's slightly strange ptrace */ +#define PYRAMID_PTRACE + +/* Traditional Unix virtual address spaces have thre regions: text, + data and stack. The text, initialised data, and uninitialised data + are represented in separate segments of the a.out file. + When a process dumps core, the data and stack regions are written + to a core file. This gives a debugger enough information to + reconstruct (and debug) the virtual address space at the time of + the coredump. + Pyramids have an distinct fourth region of the virtual address + space, in which the contents of the windowed registers are stacked + in fixed-size frames. Pyramid refer to this region as the control + stack. Each call (or trap) automatically allocates a new register + frame; each return deallocates the current frame and restores the + windowed registers to their values before the call. + + When dumping core, the control stack is written to a core files as + a third segment. The core-handling functions need to know to deal + with it. */ + +/* Tell dep.c what the extra segment is. */ +#define PYRAMID_CORE + +#define NO_SIGINTERRUPT + +#define HAVE_WAIT_STRUCT + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG)) + +/* Define offsets of registers in the core file (or maybe u area) */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ struct user __u; \ + addr = blockend + (regno - 16 ) * 4; \ + if (regno == 67) { \ + printf("\\geting reg 67\\"); \ + addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u; \ + } else if (regno == KSP_REGNUM) { \ + printf("\\geting KSP (reg %d)\\", KSP_REGNUM); \ + addr = (int)(&__u.u_pcb.pcb_ksp) - (int) &__u; \ + } else if (regno == CSP_REGNUM) { \ + printf("\\geting CSP (reg %d\\",CSP_REGNUM); \ + addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u; \ + } else if (regno == 64) { \ + printf("\\geting reg 64\\"); \ + addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u; \ + } else if (regno == PS_REGNUM) \ + addr = blockend - 4; \ + else if (1 && ((16 > regno) && (regno > 11))) \ + addr = last_frame_offset + (4 *(regno+32)); \ + else if (0 && (12 > regno)) \ + addr = global_reg_offset + (4 *regno); \ + else if (16 > regno) \ + addr = global_reg_offset + (4 *regno); \ + else \ + addr = blockend + (regno - 16 ) * 4; \ +} + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ +#define FETCH_INFERIOR_REGISTERS diff --git a/gdb/config/romp/rtbsd.mh b/gdb/config/romp/rtbsd.mh new file mode 100644 index 0000000..003c42f --- /dev/null +++ b/gdb/config/romp/rtbsd.mh @@ -0,0 +1,8 @@ +# IBM RT/PC running BSD unix. +# This file contributed at NYU, where we are using the RT to remote +# debug an a29k running unix. No attempt, as of 7/16/91, has been made +# to support debugging of RT executables. +XDEPFILES corelow.o core-aout.o infptrace.o inftarg.o fork-child.o +MH_CFLAGS=-DHOSTING_ONLY # No debugging of RT executables +XM_FILE= xm-rtbsd.h +CC=gcc -traditional # hc/pcc just can't cut it. diff --git a/gdb/config/romp/xm-rtbsd.h b/gdb/config/romp/xm-rtbsd.h new file mode 100644 index 0000000..d99b57f --- /dev/null +++ b/gdb/config/romp/xm-rtbsd.h @@ -0,0 +1,40 @@ +/* Definitions to host GDB on an IBM RT/PC running BSD Unix. + Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + Contributed by David Wood @ New York University (wood@lab.ultra.nyu.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This machine is most significant byte first */ +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* This OS has the wait structure */ +#define HAVE_WAIT_STRUCT + +#ifdef HOSTING_ONLY +/* + * This next two defines are to get GDB up and running as a host to + * do remote debugging. I know there is a gdb for the RT, but there wasn't + * an xconfig/rt* file. + */ +#define KERNEL_U_ADDR_BSD /* This may be correct, but hasn't been tested */ +#define REGISTER_U_ADDR(a,b,c) \ + (printf("GDB can not debug IBM RT/PC BSD executables (yet)\n"),\ + quit(),0) +#else +# include "GDB for the RT is not included in the distribution" +#endif + diff --git a/gdb/config/rs6000/aix4.mh b/gdb/config/rs6000/aix4.mh new file mode 100644 index 0000000..c5bc2da --- /dev/null +++ b/gdb/config/rs6000/aix4.mh @@ -0,0 +1,11 @@ +# Host: IBM RS/6000 running AIX4 + +XM_FILE= xm-aix4.h +XDEPFILES= + +NAT_FILE= nm-rs6000.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o + +# When compiled with cc, for debugging, this argument should be passed. +# We have no idea who our current compiler is though, so we skip it. +# MH_CFLAGS = -bnodelcsect diff --git a/gdb/config/rs6000/aix4.mt b/gdb/config/rs6000/aix4.mt new file mode 100644 index 0000000..f213f0f --- /dev/null +++ b/gdb/config/rs6000/aix4.mt @@ -0,0 +1,3 @@ +# Target: IBM RS/6000 running AIX4 +TDEPFILES= rs6000-tdep.o xcoffsolib.o xcoffread.o +TM_FILE= tm-rs6000-aix4.h diff --git a/gdb/config/rs6000/nm-rs6000.h b/gdb/config/rs6000/nm-rs6000.h new file mode 100644 index 0000000..cf0d53d --- /dev/null +++ b/gdb/config/rs6000/nm-rs6000.h @@ -0,0 +1,60 @@ +/* IBM RS/6000 native-dependent macros for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +#define PTRACE_ATTACH PT_ATTACH +#define PTRACE_DETACH PT_DETACH + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* When a child process is just starting, we sneak in and relocate + the symbol table (and other stuff) after the dynamic linker has + figured out where they go. */ + +#define SOLIB_CREATE_INFERIOR_HOOK(PID) \ + do { \ + xcoff_relocate_symtab (PID); \ + } while (0) + +/* When a target process or core-file has been attached, we sneak in + and figure out where the shared libraries have got to. */ + +#define SOLIB_ADD(a, b, c) \ + if (inferior_pid) \ + /* Attach to process. */ \ + xcoff_relocate_symtab (inferior_pid); \ + else \ + /* Core file. */ \ + xcoff_relocate_core (c); + +extern void xcoff_relocate_symtab PARAMS ((unsigned int)); +#ifdef __STDC__ +struct target_ops; +#endif +extern void xcoff_relocate_core PARAMS ((struct target_ops *)); + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); diff --git a/gdb/config/rs6000/nm-rs6000ly.h b/gdb/config/rs6000/nm-rs6000ly.h new file mode 100644 index 0000000..4159822 --- /dev/null +++ b/gdb/config/rs6000/nm-rs6000ly.h @@ -0,0 +1,25 @@ +/* Native-dependent definitions for RS6000 running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_RS6000LYNX_H +#define NM_RS6000LYNX_H + +#include "nm-lynx.h" + +#endif /* NM_RS6000LYNX_H */ diff --git a/gdb/config/rs6000/rs6000.mh b/gdb/config/rs6000/rs6000.mh new file mode 100644 index 0000000..600d616 --- /dev/null +++ b/gdb/config/rs6000/rs6000.mh @@ -0,0 +1,11 @@ +# Host: IBM RS/6000 running AIX + +XM_FILE= xm-rs6000.h +XDEPFILES= + +NAT_FILE= nm-rs6000.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o + +# When compiled with cc, for debugging, this argument should be passed. +# We have no idea who our current compiler is though, so we skip it. +# MH_CFLAGS = -bnodelcsect diff --git a/gdb/config/rs6000/rs6000.mt b/gdb/config/rs6000/rs6000.mt new file mode 100644 index 0000000..a2294b2 --- /dev/null +++ b/gdb/config/rs6000/rs6000.mt @@ -0,0 +1,3 @@ +# Target: IBM RS/6000 running AIX +TDEPFILES= rs6000-tdep.o xcoffsolib.o xcoffread.o +TM_FILE= tm-rs6000.h diff --git a/gdb/config/rs6000/rs6000lynx.mh b/gdb/config/rs6000/rs6000lynx.mh new file mode 100644 index 0000000..b938152 --- /dev/null +++ b/gdb/config/rs6000/rs6000lynx.mh @@ -0,0 +1,11 @@ +# Host: RS6000 running LynxOS + +XM_FILE= xm-rs6000ly.h +XDEPFILES= ser-tcp.o +XM_CLIBS= -lbsd + +NAT_FILE= nm-rs6000ly.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o xcoffread.o + +GDBSERVER_LIBS= -lbsd +GDBSERVER_DEPFILES= low-lynx.o diff --git a/gdb/config/rs6000/rs6000lynx.mt b/gdb/config/rs6000/rs6000lynx.mt new file mode 100644 index 0000000..978030c --- /dev/null +++ b/gdb/config/rs6000/rs6000lynx.mt @@ -0,0 +1,3 @@ +# Target: IBM RS6000 running LynxOS +TDEPFILES= coff-solib.o rs6000-tdep.o +TM_FILE= tm-rs6000ly.h diff --git a/gdb/config/rs6000/tm-rs6000-aix4.h b/gdb/config/rs6000/tm-rs6000-aix4.h new file mode 100644 index 0000000..f65eae3 --- /dev/null +++ b/gdb/config/rs6000/tm-rs6000-aix4.h @@ -0,0 +1,26 @@ +/* Macro definitions for RS/6000 running AIX4. + Copyright 1995, 1997 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef TM_RS6000_AIX4_H +#define TM_RS6000_AIX4_H + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" + +#endif /* TM_RS6000_AIX4_H */ diff --git a/gdb/config/rs6000/tm-rs6000.h b/gdb/config/rs6000/tm-rs6000.h new file mode 100644 index 0000000..52beec1 --- /dev/null +++ b/gdb/config/rs6000/tm-rs6000.h @@ -0,0 +1,564 @@ +/* Parameters for target execution on an RS6000, for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1997 + Free Software Foundation, Inc. + Contributed by IBM Corporation. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct frame_info; +struct type; +struct value; +#endif + +/* Minimum possible text address in AIX */ + +#define TEXT_SEGMENT_BASE 0x10000000 + +/* Load segment of a given pc value. */ + +#define PC_LOAD_SEGMENT(PC) pc_load_segment_name(PC) +extern char *pc_load_segment_name PARAMS ((CORE_ADDR)); + +/* AIX cc seems to get this right. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* return true if a given `pc' value is in `call dummy' function. */ +/* FIXME: This just checks for the end of the stack, which is broken + for things like stepping through gcc nested function stubs. */ +#define PC_IN_CALL_DUMMY(STOP_PC, STOP_SP, STOP_FRAME_ADDR) \ + (STOP_SP < STOP_PC && STOP_PC < STACK_END_ADDR) + +#if 0 +extern unsigned int text_start, data_start; +extern char *corefile; +#endif +extern int inferior_pid; + +/* We are missing register descriptions in the system header files. Sigh! */ + +struct regs { + int gregs [32]; /* general purpose registers */ + int pc; /* program conter */ + int ps; /* processor status, or machine state */ +}; + +struct fp_status { + double fpregs [32]; /* floating GP registers */ +}; + + +/* To be used by skip_prologue. */ + +struct rs6000_framedata { + int offset; /* total size of frame --- the distance + by which we decrement sp to allocate + the frame */ + int saved_gpr; /* smallest # of saved gpr */ + int saved_fpr; /* smallest # of saved fpr */ + int alloca_reg; /* alloca register number (frame ptr) */ + char frameless; /* true if frameless functions. */ + char nosavedpc; /* true if pc not saved. */ + int gpr_offset; /* offset of saved gprs from prev sp */ + int fpr_offset; /* offset of saved fprs from prev sp */ + int lr_offset; /* offset of saved lr */ + int cr_offset; /* offset of saved cr */ +}; + +/* Define the byte order of the machine. */ + +#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN + +/* AIX's assembler doesn't grok dollar signs in identifiers. + So we use dots instead. This item must be coordinated with G++. */ +#undef CPLUS_MARKER +#define CPLUS_MARKER '.' + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ +do { \ + struct rs6000_framedata _frame; \ + pc = skip_prologue (pc, &_frame); \ +} while (0) + +extern CORE_ADDR skip_prologue PARAMS((CORE_ADDR, struct rs6000_framedata *)); + + +/* If PC is in some function-call trampoline code, return the PC + where the function itself actually starts. If not, return NULL. */ + +#define SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc) +extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR)); + +/* Number of trap signals we need to skip over, once the inferior process + starts running. */ + +#define START_INFERIOR_TRAPS_EXPECTED 2 + +/* AIX has a couple of strange returns from wait(). */ + +#define CHILD_SPECIAL_WAITSTATUS(ourstatus, hoststatus) ( \ + /* "stop after load" status. */ \ + (hoststatus) == 0x57c ? (ourstatus)->kind = TARGET_WAITKIND_LOADED, 1 : \ + \ + /* signal 0. I have no idea why wait(2) returns with this status word. */ \ + /* It looks harmless. */ \ + (hoststatus) == 0x7f ? (ourstatus)->kind = TARGET_WAITKIND_SPURIOUS, 1 : \ + \ + /* A normal waitstatus. Let the usual macros deal with it. */ \ + 0) + +/* In xcoff, we cannot process line numbers when we see them. This is + mainly because we don't know the boundaries of the include files. So, + we postpone that, and then enter and sort(?) the whole line table at + once, when we are closing the current symbol table in end_symtab(). */ + +#define PROCESS_LINENUMBER_HOOK() aix_process_linenos () +extern void aix_process_linenos PARAMS ((void)); + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) read_register (LR_REGNUM) + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0x2ff80000 + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* This is how arguments pushed onto stack or passed in registers. + Stack must be aligned on 64-bit boundaries when synthesizing + function calls. We don't need STACK_ALIGN, PUSH_ARGUMENTS will + handle it. */ + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR push_arguments PARAMS ((int, struct value **, CORE_ADDR, + int, CORE_ADDR)); + +/* BREAKPOINT_FROM_PC uses the program counter value to determine the + breakpoint that should be used */ +extern breakpoint_from_pc_fn rs6000_breakpoint_from_pc; +#define BREAKPOINT_FROM_PC(pcptr, lenptr) rs6000_breakpoint_from_pc (pcptr, lenptr) + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ +#define REGISTER_SIZE 4 + + +/* Return the name of register number REG. This may return "" to + indicate a register number that's not used on this variant. + (Register numbers may be sparse for consistency between variants.) */ +#define REGISTER_NAME(reg) (rs6000_register_name(reg)) +extern char *rs6000_register_name (int reg); + +/* Number of machine registers */ +#define NUM_REGS 183 + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define FP_REGNUM 1 /* Contains address of executing stack frame */ +#define SP_REGNUM 1 /* Contains address of top of stack */ +#define TOC_REGNUM 2 /* TOC register */ +#define FP0_REGNUM 32 /* Floating point register 0 */ +#define GP0_REGNUM 0 /* GPR register 0 */ +#define FP0_REGNUM 32 /* FPR (Floating point) register 0 */ +#define FPLAST_REGNUM 63 /* Last floating point register */ + +/* Special purpose registers... */ +/* P.S. keep these in the same order as in /usr/mstsave.h `mstsave' + structure, for easier processing */ + +#define PC_REGNUM 64 /* Program counter (instruction address %iar)*/ +#define PS_REGNUM 65 /* Processor (or machine) status (%msr) */ +#define CR_REGNUM 66 /* Condition register */ +#define LR_REGNUM 67 /* Link register */ +#define CTR_REGNUM 68 /* Count register */ +#define XER_REGNUM 69 /* Fixed point exception registers */ +#define MQ_REGNUM 70 /* Multiply/quotient register */ + +/* These #defines are used to parse core files and talk to ptrace, so they + must remain fixed. */ +#define FIRST_UISA_SP_REGNUM 64 /* first special register number */ +#define LAST_UISA_SP_REGNUM 70 /* last special register number */ + +/* This is the offset in REG_NAMES at which the `set processor' + command starts plugging in its names. */ +#define FIRST_VARIANT_REGISTER 66 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. + 32 4-byte gpr's + 32 8-byte fpr's + 7 4-byte UISA special purpose registers, + 16 4-byte segment registers, + 32 4-byte standard OEA special-purpose registers, + and up to 64 4-byte non-standard OEA special purpose regs. + total: (+ (* 32 4) (* 32 8) (* 7 4) (* 16 4) (* 32 4) (* 64 4)) 860 bytes + Keep some extra space for now, in case to add more. */ +#define REGISTER_BYTES 880 + + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) \ + ( \ + ((N) > FPLAST_REGNUM) ? ((((N) - FPLAST_REGNUM -1) * 4) + 384)\ + :((N) >= FP0_REGNUM) ? ((((N) - FP0_REGNUM) * 8) + 128) \ + :((N) * 4) ) + +/* Number of bytes of storage in the actual machine representation + for register N. */ +/* Note that the unsigned cast here forces the result of the + subtraction to very high positive values if N < FP0_REGNUM */ + +#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 32 ? 8 : 4) + +/* Number of bytes of storage in the program's representation + for register N. On the RS6000, all regs are 4 bytes + except the floating point regs which are 8-byte doubles. */ + +#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 32 ? 8 : 4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* convert a dbx stab register number (from `r' declaration) to a gdb REGNUM */ + +#define STAB_REG_TO_REGNUM(value) (value) + +/* Nonzero if register N requires conversion + from raw format to virtual format. + The register format for rs6000 floating point registers is always + double, we need a conversion if the memory format is float. */ + +#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM && (N) <= FPLAST_REGNUM) + +/* Convert data from raw format for register REGNUM in buffer FROM + to virtual format with type TYPE in buffer TO. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \ +{ \ + if (TYPE_LENGTH (TYPE) != REGISTER_RAW_SIZE (REGNUM)) \ + { \ + double val = extract_floating ((FROM), REGISTER_RAW_SIZE (REGNUM)); \ + store_floating ((TO), TYPE_LENGTH (TYPE), val); \ + } \ + else \ + memcpy ((TO), (FROM), REGISTER_RAW_SIZE (REGNUM)); \ +} + +/* Convert data from virtual format with type TYPE in buffer FROM + to raw format for register REGNUM in buffer TO. */ + +#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \ +{ \ + if (TYPE_LENGTH (TYPE) != REGISTER_RAW_SIZE (REGNUM)) \ + { \ + double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \ + store_floating ((TO), REGISTER_RAW_SIZE (REGNUM), val); \ + } \ + else \ + memcpy ((TO), (FROM), REGISTER_RAW_SIZE (REGNUM)); \ +} + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (((unsigned)(N) - FP0_REGNUM) < 32 ? builtin_type_double : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ +/* in RS6000, struct return addresses are passed as an extra parameter in r3. + In function return, callee is not responsible of returning this address back. + Since gdb needs to find it, we will store in a designated variable + `rs6000_struct_return_address'. */ + +extern CORE_ADDR rs6000_struct_return_address; + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (3, (ADDR)); \ + rs6000_struct_return_address = (ADDR); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +/* #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + extract_return_value(TYPE,REGBUF,VALBUF) +extern void extract_return_value PARAMS ((struct type *, char [], char *)); + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { \ + if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ + \ + /* Floating point values are returned starting from FPR1 and up. \ + Say a double_double_double type could be returned in \ + FPR1/FPR2/FPR3 triple. */ \ + \ + write_register_bytes (REGISTER_BYTE (FP0_REGNUM+1), (VALBUF), \ + TYPE_LENGTH (TYPE)); \ + else \ + /* Everything else is returned in GPR3 and up. */ \ + write_register_bytes (REGISTER_BYTE (GP0_REGNUM+3), (VALBUF), \ + TYPE_LENGTH (TYPE)); \ + } + + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) rs6000_struct_return_address + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the RS6000, the frame's nominal address + is the address of a 4-byte word containing the calling frame's address. */ + +#define FRAME_CHAIN(thisframe) rs6000_frame_chain (thisframe) +CORE_ADDR rs6000_frame_chain PARAMS ((struct frame_info *)); + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + FRAMELESS = frameless_function_invocation (FI) + +extern int frameless_function_invocation PARAMS((struct frame_info *)); + +#define INIT_FRAME_PC_FIRST(fromleaf, prev) \ + prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \ + prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ()); +#define INIT_FRAME_PC(fromleaf, prev) /* nothing */ +extern void rs6000_init_extra_frame_info (int fromleaf, struct frame_info *); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) rs6000_init_extra_frame_info (fromleaf, fi) + +/* If the kernel has to deliver a signal, it pushes a sigcontext + structure on the stack and then calls the signal handler, passing + the address of the sigcontext in an argument register. Usually + the signal handler doesn't save this register, so we have to + access the sigcontext structure via an offset from the signal handler + frame. + The following constants were determined by experimentation on AIX 3.2. */ +#define SIG_FRAME_PC_OFFSET 96 +#define SIG_FRAME_LR_OFFSET 108 +#define SIG_FRAME_FP_OFFSET 284 + +/* Default offset from SP where the LR is stored */ +#define DEFAULT_LR_SAVE 8 + +/* Return saved PC from a frame */ +#define FRAME_SAVED_PC(FRAME) frame_saved_pc (FRAME) + +extern unsigned long frame_saved_pc PARAMS ((struct frame_info *)); + +extern CORE_ADDR rs6000_frame_args_address PARAMS ((struct frame_info *)); +#define FRAME_ARGS_ADDRESS(FI) rs6000_frame_args_address (FI) + +#define FRAME_LOCALS_ADDRESS(FI) FRAME_ARGS_ADDRESS(FI) + + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 /* Not sure on this. FIXMEmgo */ + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ +/* In the following implementation for RS6000, we did *not* save sp. I am + not sure if it will be needed. The following macro takes care of gpr's + and fpr's only. */ + +extern void rs6000_frame_init_saved_regs PARAMS ((struct frame_info *)); +#define FRAME_INIT_SAVED_REGS(FI) rs6000_frame_init_saved_regs (FI) + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ +/* Change these names into rs6k_{push, pop}_frame(). FIXMEmgo. */ + +#define PUSH_DUMMY_FRAME push_dummy_frame () +extern void push_dummy_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +#define POP_FRAME pop_frame () +extern void pop_frame PARAMS ((void)); + +/* This sequence of words is the instructions: + + mflr r0 // 0x7c0802a6 + // save fpr's + stfd r?, num(r1) // 0xd8010000 there should be 32 of this?? + // save gpr's + stm r0, num(r1) // 0xbc010000 + stu r1, num(r1) // 0x94210000 + + // the function we want to branch might be in a different load + // segment. reset the toc register. Note that the actual toc address + // will be fix by fix_call_dummy () along with function address. + + st r2, 0x14(r1) // 0x90410014 save toc register + liu r2, 0x1234 // 0x3c401234 reset a new toc value 0x12345678 + oril r2, r2,0x5678 // 0x60425678 + + // load absolute address 0x12345678 to r0 + liu r0, 0x1234 // 0x3c001234 + oril r0, r0,0x5678 // 0x60005678 + mtctr r0 // 0x7c0903a6 ctr <- r0 + bctrl // 0x4e800421 jump subroutine 0x12345678 (%ctr) + cror 0xf, 0xf, 0xf // 0x4def7b82 + brpt // 0x7d821008, breakpoint + cror 0xf, 0xf, 0xf // 0x4def7b82 (for 8 byte alignment) + + + We actually start executing by saving the toc register first, since the pushing + of the registers is done by PUSH_DUMMY_FRAME. If this were real code, + the arguments for the function called by the `bctrl' would be pushed + between the `stu' and the `bctrl', and we could allow it to execute through. + But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is done, + and we cannot allow to push the registers again. +*/ + +#define CALL_DUMMY {0x7c0802a6, 0xd8010000, 0xbc010000, 0x94210000, \ + 0x90410014, 0x3c401234, 0x60425678, \ + 0x3c001234, 0x60005678, 0x7c0903a6, 0x4e800421, \ + 0x4def7b82, 0x7d821008, 0x4def7b82 } + + +/* keep this as multiple of 8 (%sp requires 8 byte alignment) */ +#define CALL_DUMMY_LENGTH 56 + +#define CALL_DUMMY_START_OFFSET 16 + +/* Insert the specified number of args and function address into a + call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p) +extern void rs6000_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, + int, struct value **, + struct type *, int)); + +/* Hook in rs6000-tdep.c for determining the TOC address when + calling functions in the inferior. */ +extern CORE_ADDR (*find_toc_address_hook) PARAMS ((CORE_ADDR)); + +/* xcoffread.c provides a function to determine the TOC offset + for a given object file. + It is used under native AIX configurations for determining the + TOC address when calling functions in the inferior. */ +#ifdef __STDC__ +struct objfile; +#endif +extern CORE_ADDR get_toc_offset PARAMS ((struct objfile *)); + +/* Usually a function pointer's representation is simply the address + of the function. On the RS/6000 however, a function pointer is + represented by a pointer to a TOC entry. This TOC entry contains + three words, the first word is the address of the function, the + second word is the TOC pointer (r2), and the third word is the + static chain value. Throughout GDB it is currently assumed that a + function pointer contains the address of the function, which is not + easy to fix. In addition, the conversion of a function address to + a function pointer would require allocation of a TOC entry in the + inferior's memory space, with all its drawbacks. To be able to + call C++ virtual methods in the inferior (which are called via + function pointers), find_function_addr uses this macro to get the + function address from a function pointer. */ + +#define CONVERT_FROM_FUNC_PTR_ADDR(ADDR) \ + (is_magic_function_pointer (ADDR) ? read_memory_integer (ADDR, 4) : (ADDR)) +extern int is_magic_function_pointer PARAMS ((CORE_ADDR)); + +/* Flag for machine-specific stuff in shared files. FIXME */ +#define IBM6000_TARGET + +/* RS6000/AIX does not support PT_STEP. Has to be simulated. */ + +#define SOFTWARE_SINGLE_STEP_P 1 +extern void rs6000_software_single_step PARAMS ((unsigned int, int)); +#define SOFTWARE_SINGLE_STEP(sig,bp_p) rs6000_software_single_step (sig, bp_p) + +/* If the current gcc for for this target does not produce correct debugging + information for float parameters, both prototyped and unprototyped, then + define this macro. This forces gdb to always assume that floats are + passed as doubles and then converted in the callee. + + For the PowerPC, it appears that the debug info marks the parameters as + floats regardless of whether the function is prototyped, but the actual + values are always passed in as doubles. Thus by setting this to 1, both + types of calls will work. */ + +#define COERCE_FLOAT_TO_DOUBLE 1 diff --git a/gdb/config/rs6000/tm-rs6000ly.h b/gdb/config/rs6000/tm-rs6000ly.h new file mode 100644 index 0000000..0946b0f --- /dev/null +++ b/gdb/config/rs6000/tm-rs6000ly.h @@ -0,0 +1,32 @@ +/* Macro definitions for RS6000 running under LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_RS6000LYNX_H +#define TM_RS6000LYNX_H + +#include "tm-lynx.h" + +/* Use generic RS6000 definitions. */ +#include "rs6000/tm-rs6000.h" + +#undef PC_LOAD_SEGMENT + +#define CANNOT_STORE_REGISTER(regno) (regno == PS_REGNUM) + +#endif /* TM_RS6000LYNX_H */ diff --git a/gdb/config/rs6000/xm-aix4.h b/gdb/config/rs6000/xm-aix4.h new file mode 100644 index 0000000..1bc5cae --- /dev/null +++ b/gdb/config/rs6000/xm-aix4.h @@ -0,0 +1,26 @@ +/* Parameters for hosting on an RS6000, for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + Contributed by IBM Corporation. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "xm-aix4.h" + +/* AIX 4.x uses nonstandard "int *" as type of third argument to ptrace() */ + +#define PTRACE_ARG3_TYPE int* + diff --git a/gdb/config/rs6000/xm-rs6000.h b/gdb/config/rs6000/xm-rs6000.h new file mode 100644 index 0000000..44b8b24 --- /dev/null +++ b/gdb/config/rs6000/xm-rs6000.h @@ -0,0 +1,107 @@ +/* Parameters for hosting on an RS6000, for GDB, the GNU debugger. + Copyright 1986-87, 1989, 1991-96, 1998 Free Software Foundation, Inc. + Contributed by IBM Corporation. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The following text is taken from config/rs6000.mh: + * # The IBM version of /usr/include/rpc/rpc.h has a bug -- it says + * # `extern fd_set svc_fdset;' without ever defining the type fd_set. + * # Unfortunately this occurs in the vx-share code, which is not configured + * # like the rest of GDB (e.g. it doesn't include "defs.h"). + * # We circumvent this bug by #define-ing fd_set here, but undefining it in + * # the xm-rs6000.h file before ordinary modules try to use it. FIXME, IBM! + * MH_CFLAGS='-Dfd_set=int' + * So, here we do the undefine...which has to occur before we include + * <sys/select.h> below. + */ +#undef fd_set + +#include <sys/select.h> + +/* Big end is at the low address */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* At least as of AIX 3.2, we have termios. */ +#define HAVE_TERMIOS 1 +/* #define HAVE_TERMIO 1 */ + +#define USG 1 +#define HAVE_SIGSETMASK 1 + +#define FIVE_ARG_PTRACE + +/* This system requires that we open a terminal with O_NOCTTY for it to + not become our controlling terminal. */ + +#define USE_O_NOCTTY + +/* Brain death inherited from PC's pervades. */ +#undef NULL +#define NULL 0 + +/* The IBM compiler requires this in order to properly compile alloca(). */ +#pragma alloca + +/* There is no vfork. */ + +#define vfork fork + +/* Setpgrp() takes arguments, unlike ordinary Sys V's. */ + +#define SETPGRP_ARGS 1 + +/* AIX doesn't have strdup, so we need to declare it for libiberty */ +extern char *strdup PARAMS ((char *)); + +/* Signal handler for SIGWINCH `window size changed'. */ + +#define SIGWINCH_HANDLER aix_resizewindow +extern void aix_resizewindow PARAMS ((int)); + +/* This doesn't seem to be declared in any header file I can find. */ +char *termdef PARAMS ((int, int)); + +/* `lines_per_page' and `chars_per_line' are local to utils.c. Rectify this. */ + +#define SIGWINCH_HANDLER_BODY \ + \ +/* Respond to SIGWINCH `window size changed' signal, and reset GDB's \ + window settings appropriately. */ \ + \ +void \ +aix_resizewindow (signo) \ + int signo; \ +{ \ + int fd = fileno (stdout); \ + if (isatty (fd)) { \ + int val; \ + \ + val = atoi (termdef (fd, 'l')); \ + if (val > 0) \ + lines_per_page = val; \ + val = atoi (termdef (fd, 'c')); \ + if (val > 0) \ + chars_per_line = val; \ + } \ +} + +/* setpgrp() messes up controling terminal. The other version of it + requires libbsd.a. */ +#define setpgrp(XX,YY) setpgid (XX, YY) + diff --git a/gdb/config/rs6000/xm-rs6000ly.h b/gdb/config/rs6000/xm-rs6000ly.h new file mode 100644 index 0000000..f75cfab --- /dev/null +++ b/gdb/config/rs6000/xm-rs6000ly.h @@ -0,0 +1,29 @@ +/* Host-dependent definitions for RS6000 running LynxOS, for GDB. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef XM_RS6000LYNX_H +#define XM_RS6000LYNX_H + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Get generic LynxOS host definitions. */ + +#include "xm-lynx.h" + +#endif /* XM_RS6000LYNX_H */ diff --git a/gdb/config/sh/sh.mt b/gdb/config/sh/sh.mt new file mode 100644 index 0000000..a6604d4 --- /dev/null +++ b/gdb/config/sh/sh.mt @@ -0,0 +1,6 @@ +# Target: Hitachi Super-H with ICE and simulator +TDEPFILES= sh-tdep.o monitor.o sh3-rom.o remote-e7000.o ser-e7kpc.o dsrec.o +TM_FILE= tm-sh.h + +SIM_OBS = remote-sim.o +SIM = ../sim/sh/libsim.a diff --git a/gdb/config/sh/tm-sh.h b/gdb/config/sh/tm-sh.h new file mode 100644 index 0000000..2177909 --- /dev/null +++ b/gdb/config/sh/tm-sh.h @@ -0,0 +1,281 @@ +/* Target-specific definition for a Hitachi Super-H. + Copyright (C) 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Contributed by Steve Chamberlain sac@cygnus.com */ + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct value; +struct type; +#endif + +#define GDB_TARGET_IS_SH + +#define IEEE_FLOAT 1 + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER_SELECTABLE + + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR sh_skip_prologue (); +#define SKIP_PROLOGUE(ip) \ + {(ip) = sh_skip_prologue(ip);} + + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. + + The return address is the value saved in the PR register + 4 */ + +#define SAVED_PC_AFTER_CALL(frame) (ADDR_BITS_REMOVE(read_register(PR_REGNUM))) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Illegal instruction - used by the simulator for breakpoint + detection */ + +#define BREAKPOINT {0xc3, 0xc3} /* 0xc3c3 is trapa #c3, and it works in big + and little endian modes */ + +#define BIG_REMOTE_BREAKPOINT { 0xc3, 0x20 } +#define LITTLE_REMOTE_BREAKPOINT { 0x20, 0xc3 } + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long registers are. */ +#define REGISTER_TYPE long + +/* Say how much memory is needed to store a copy of the register set */ +#define REGISTER_BYTES (NUM_REGS*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) 4 + +#define REGISTER_VIRTUAL_SIZE(N) 4 + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((((N) >= FP0_REGNUM && (N) <= FP15_REGNUM) \ + || (N) == FPUL_REGNUM) \ + ? builtin_type_float : builtin_type_int) + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +extern char **sh_register_names; +#define REGISTER_NAME(i) sh_register_names[i] + +#define NUM_REGS 59 + +/* Register numbers of various important registers. Note that some of + these values are "real" register numbers, and correspond to the + general registers of the machine, and some are "phony" register + numbers which are too large to be actual register numbers as far as + the user is concerned but do serve to get the desired values when + passed to read_register. */ + +#define R0_REGNUM 0 +#define STRUCT_RETURN_REGNUM 2 +#define ARG0_REGNUM 4 +#define ARGLAST_REGNUM 7 +#define FP_REGNUM 14 +#define SP_REGNUM 15 +#define PC_REGNUM 16 +#define PR_REGNUM 17 +#define GBR_REGNUM 18 +#define VBR_REGNUM 19 +#define MACH_REGNUM 20 +#define MACL_REGNUM 21 +#define SR_REGNUM 22 +#define FPUL_REGNUM 23 +#define FPSCR_REGNUM 24 +#define FP0_REGNUM 25 +#define FP15_REGNUM 40 +#define SSR_REGNUM 41 +#define SPC_REGNUM 42 +#define R0B0_REGNUM 43 +#define R0B1_REGNUM 51 + +#define NUM_REALREGS 59 + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + We store structs through a pointer passed in R0 */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (STRUCT_RETURN_REGNUM, (ADDR)); } + +extern use_struct_convention_fn sh_use_struct_convention; +#define USE_STRUCT_CONVENTION(gcc_p, type) sh_use_struct_convention (gcc_p, type) + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +extern void sh_extract_return_value PARAMS ((struct type *, void *, void *)); +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + sh_extract_return_value (TYPE, REGBUF, VALBUF) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + Things always get returned in R0/R1 */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE(0), VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF, REGISTER_RAW_SIZE (0)) + + +/* Define other aspects of the stack frame. + we keep a copy of the worked out return pc lying around, since it + is a useful bit of info */ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR return_pc; \ + int leaf_function; \ + int f_offset; + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + sh_init_extra_frame_info(fromleaf, fi) +extern void sh_init_extra_frame_info PARAMS ((int, struct frame_info *)); + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc) +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +extern void sh_frame_find_saved_regs PARAMS ((struct frame_info *fi, + struct frame_saved_regs *fsr)); + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + sh_frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +#define NAMES_HAVE_UNDERSCORE + +typedef unsigned short INSN_WORD; + +extern CORE_ADDR sh_push_arguments PARAMS ((int nargs, + struct value **args, + CORE_ADDR sp, + unsigned char struct_return, + CORE_ADDR struct_addr)); + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_LENGTH (0) +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define FIX_CALL_DUMMY(DUMMY, STARTADDR, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define CALL_DUMMY_ADDRESS() entry_point_address () +extern CORE_ADDR sh_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +#define PUSH_RETURN_ADDRESS(PC, SP) sh_push_return_address (PC, SP) + + +extern CORE_ADDR sh_frame_chain PARAMS ((struct frame_info *)); +#define FRAME_CHAIN(FRAME) sh_frame_chain(FRAME) +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () +#define FRAME_CHAIN_VALID(FP, FRAME) generic_frame_chain_valid (FP, FRAME) +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = sh_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +/* override the standard get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + +/* Discard from the stack the innermost frame, restoring all saved + registers. */ + +extern void sh_pop_frame PARAMS ((void)); +#define POP_FRAME sh_pop_frame(); + +#define NOP {0x20, 0x0b} + +#define REGISTER_SIZE 4 + +#define COERCE_FLOAT_TO_DOUBLE 1 + +#define BELIEVE_PCC_PROMOTION 1 + +/* Need this for WinGDB. See gdb/mswin/{regdoc.h, gdbwin.c, gui.cpp}. */ +#define TARGET_SH diff --git a/gdb/config/sparc/linux.mh b/gdb/config/sparc/linux.mh new file mode 100644 index 0000000..954398f --- /dev/null +++ b/gdb/config/sparc/linux.mh @@ -0,0 +1,7 @@ +# Host: Sparcstation, running Linux +XDEPFILES= ser-tcp.o +XM_FILE= xm-linux.h +NAT_FILE= nm-linux.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o +HOST_IPC=-DBSD_IPC +GDBSERVER_DEPFILES= low-sparc.o diff --git a/gdb/config/sparc/linux.mt b/gdb/config/sparc/linux.mt new file mode 100644 index 0000000..ca422e9 --- /dev/null +++ b/gdb/config/sparc/linux.mt @@ -0,0 +1,3 @@ +# Target: Sparcstation, running Linux +TDEPFILES= sparc-tdep.o solib.o +TM_FILE= tm-linux.h diff --git a/gdb/config/sparc/nbsd.mh b/gdb/config/sparc/nbsd.mh new file mode 100644 index 0000000..310838d --- /dev/null +++ b/gdb/config/sparc/nbsd.mh @@ -0,0 +1,6 @@ +# Host: Sun 4 or Sparcstation, running NetBSD +XDEPFILES= ser-tcp.o +XM_FILE= xm-nbsd.h +NAT_FILE= nm-nbsd.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o +HOST_IPC=-DBSD_IPC diff --git a/gdb/config/sparc/nbsd.mt b/gdb/config/sparc/nbsd.mt new file mode 100644 index 0000000..be8a348 --- /dev/null +++ b/gdb/config/sparc/nbsd.mt @@ -0,0 +1,3 @@ +# Target: Sun 4 or Sparcstation, running NetBSD +TDEPFILES= sparc-tdep.o solib.o +TM_FILE= tm-nbsd.h diff --git a/gdb/config/sparc/nm-linux.h b/gdb/config/sparc/nm-linux.h new file mode 100644 index 0000000..b2b2a91 --- /dev/null +++ b/gdb/config/sparc/nm-linux.h @@ -0,0 +1,31 @@ +/* Macro definitions for running gdb on a Sparc running Linux. + Copyright (C) 1989, 1992, 1996, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include <nm-sysv4.h> +#include "solib.h" + +#define FETCH_INFERIOR_REGISTERS + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); + +/* Linux is svr4ish but not that much */ +#undef USE_PROC_FS diff --git a/gdb/config/sparc/nm-nbsd.h b/gdb/config/sparc/nm-nbsd.h new file mode 100644 index 0000000..016772a --- /dev/null +++ b/gdb/config/sparc/nm-nbsd.h @@ -0,0 +1,57 @@ +/* Native-dependent definitions for Sparc running NetBSD, for GDB. + Copyright (C) 1986, 1987, 1989, 1992, 1995, 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_NBSD_H +#define NM_NBSD_H + +/* Get generic NetBSD native definitions. */ + +#include "nm-nbsd.h" + +#define FETCH_INFERIOR_REGISTERS + +/* Before storing, we need to read all the registers. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Make things match up with what is expected in sparc-nat.c. */ + +#define regs trapframe +#define fp_status fpstate + +#define r_g1 tf_global[1] +#define r_ps tf_psr +#define r_pc tf_pc +#define r_npc tf_npc +#define r_y tf_y + +#define fpu fpstate +#define fpu_regs fs_regs +#define fpu_fsr fs_fsr +#define fpu_fr fs_regs +#define Fpu_fsr fs_fsr +#define FPU_FSR_TYPE int + +#define PTRACE_GETREGS PT_GETREGS +#define PTRACE_GETFPREGS PT_GETFPREGS +#define PTRACE_SETREGS PT_SETREGS +#define PTRACE_SETFPREGS PT_SETFPREGS + +#endif /* NM_NBSD_H */ diff --git a/gdb/config/sparc/nm-sparclynx.h b/gdb/config/sparc/nm-sparclynx.h new file mode 100644 index 0000000..24011dc --- /dev/null +++ b/gdb/config/sparc/nm-sparclynx.h @@ -0,0 +1,25 @@ +/* Native-dependent definitions for Sparc running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef NM_SPARCLYNX_H +#define NM_SPARCLYNX_H + +#include "nm-lynx.h" + +#endif /* NM_SPARCLYNX_H */ diff --git a/gdb/config/sparc/nm-sun4os4.h b/gdb/config/sparc/nm-sun4os4.h new file mode 100644 index 0000000..9da96be --- /dev/null +++ b/gdb/config/sparc/nm-sun4os4.h @@ -0,0 +1,35 @@ +/* Macro definitions for running gdb on a Sun 4 running sunos 4. + Copyright (C) 1989, 1992, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Do implement the attach and detach commands. */ + +#define ATTACH_DETACH + +/* Override copies of {fetch,store}_inferior_registers in infptrace.c. */ + +#define FETCH_INFERIOR_REGISTERS + +/* Before storing, we need to read all the registers. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Return sizeof user struct to callers in less machine dependent routines */ + +#define KERNEL_U_SIZE kernel_u_size() +extern int kernel_u_size PARAMS ((void)); diff --git a/gdb/config/sparc/nm-sun4sol2.h b/gdb/config/sparc/nm-sun4sol2.h new file mode 100644 index 0000000..f6833f4 --- /dev/null +++ b/gdb/config/sparc/nm-sun4sol2.h @@ -0,0 +1,45 @@ +/* Native-dependent definitions for Sparc running SVR4. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Include the generic SVR4 definitions. */ + +#include <nm-sysv4.h> + +/* Before storing, we need to read all the registers. */ + +#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES) + +/* Solaris PSRVADDR support does not seem to include a place for nPC. */ + +#define PRSVADDR_BROKEN + +#ifdef HAVE_THREAD_DB_LIB + +#ifdef __STDC__ +struct objfile; +#endif + +#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE) + +void sol_thread_new_objfile PARAMS ((struct objfile *objfile)); + +#define FIND_NEW_THREADS sol_find_new_threads +void sol_find_new_threads PARAMS ((void)); + +#endif diff --git a/gdb/config/sparc/sp64.mt b/gdb/config/sparc/sp64.mt new file mode 100644 index 0000000..8bb1e07 --- /dev/null +++ b/gdb/config/sparc/sp64.mt @@ -0,0 +1,9 @@ +# Target: SPARC64 +# solib.o and procfs.o taken out for now. We don't have shared libraries yet, +# and the elf version requires procfs.o but the a.out version doesn't. +# Then again, having procfs.o in a target makefile fragment seems wrong. +TDEPFILES = sparc-tdep.o +TM_FILE= tm-sp64.h + +# Need gcc for long long support. +CC = gcc diff --git a/gdb/config/sparc/sp64sim.mt b/gdb/config/sparc/sp64sim.mt new file mode 100644 index 0000000..a9c5ac9 --- /dev/null +++ b/gdb/config/sparc/sp64sim.mt @@ -0,0 +1,13 @@ +# Target: SPARC64 (with simulator) +# solib.o and procfs.o taken out for now. We don't have shared libraries yet, +# and the elf version requires procfs.o but the a.out version doesn't. +# Then again, having procfs.o in a target makefile fragment seems wrong. +TDEPFILES = sparc-tdep.o +TM_FILE= tm-sp64.h + +# Need gcc for long long support. +CC = gcc + +MH_CFLAGS = -I${srcdir}/../sim/sp64 +SIM_OBS = remote-sim.o +SIM = ../sim/sp64/libsim.a diff --git a/gdb/config/sparc/sp64sol2.mt b/gdb/config/sparc/sp64sol2.mt new file mode 100644 index 0000000..ce2f0d8 --- /dev/null +++ b/gdb/config/sparc/sp64sol2.mt @@ -0,0 +1,3 @@ +# Target: Ultrasparc, running Solaris 2 +TDEPFILES= sparc-tdep.o +TM_FILE= tm-sun4sol2.h diff --git a/gdb/config/sparc/sparc-em.mt b/gdb/config/sparc/sparc-em.mt new file mode 100644 index 0000000..13b0c6a --- /dev/null +++ b/gdb/config/sparc/sparc-em.mt @@ -0,0 +1,3 @@ +# Target: SPARC embedded +TDEPFILES= sparc-tdep.o +TM_FILE= tm-spc-em.h diff --git a/gdb/config/sparc/sparclet.mt b/gdb/config/sparc/sparclet.mt new file mode 100644 index 0000000..f08cfd7 --- /dev/null +++ b/gdb/config/sparc/sparclet.mt @@ -0,0 +1,3 @@ +# Target: SPARC embedded Sparclet monitor +TDEPFILES= sparc-tdep.o monitor.o sparclet-rom.o dsrec.o +TM_FILE= tm-sparclet.h diff --git a/gdb/config/sparc/sparclite.mt b/gdb/config/sparc/sparclite.mt new file mode 100644 index 0000000..43cb38c --- /dev/null +++ b/gdb/config/sparc/sparclite.mt @@ -0,0 +1,5 @@ +# Target: Fujitsu SPARClite processor +TDEPFILES= sparc-tdep.o sparcl-tdep.o +TM_FILE= tm-sparclite.h +SIM_OBS = remote-sim.o +SIM = ../sim/erc32/libsim.a diff --git a/gdb/config/sparc/sparclynx.mh b/gdb/config/sparc/sparclynx.mh new file mode 100644 index 0000000..6fddddd --- /dev/null +++ b/gdb/config/sparc/sparclynx.mh @@ -0,0 +1,11 @@ +# Host: Sparc running LynxOS + +XM_FILE= xm-sparclynx.h +XDEPFILES= ser-tcp.o +XM_CLIBS= -lbsd + +NAT_FILE= nm-sparclynx.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o + +GDBSERVER_LIBS= -lbsd +GDBSERVER_DEPFILES= low-lynx.o diff --git a/gdb/config/sparc/sparclynx.mt b/gdb/config/sparc/sparclynx.mt new file mode 100644 index 0000000..5e61645 --- /dev/null +++ b/gdb/config/sparc/sparclynx.mt @@ -0,0 +1,3 @@ +# Target: Sparc running LynxOS +TDEPFILES= coff-solib.o sparc-tdep.o +TM_FILE= tm-sparclynx.h diff --git a/gdb/config/sparc/sun4os4.mh b/gdb/config/sparc/sun4os4.mh new file mode 100644 index 0000000..4047c5c --- /dev/null +++ b/gdb/config/sparc/sun4os4.mh @@ -0,0 +1,11 @@ +# Host: Sun 4 or Sparcstation, running SunOS 4 +XDEPFILES= ser-tcp.o +XM_FILE= xm-sun4os4.h +NAT_FILE= nm-sun4os4.h +NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o +HOST_IPC=-DBSD_IPC +GDBSERVER_DEPFILES= low-sparc.o +# Setting XM_CLIBS=-lresolv would let us use the DNS, but that would screw +# anyone who wants to use NIS, which includes at least one Cygnus customer +# (PR 3593). So leave it this way until/unless we find a resolver which can +# get names from either DNS or NIS from the same GDB binary. diff --git a/gdb/config/sparc/sun4os4.mt b/gdb/config/sparc/sun4os4.mt new file mode 100644 index 0000000..5a4ecb9 --- /dev/null +++ b/gdb/config/sparc/sun4os4.mt @@ -0,0 +1,3 @@ +# Target: Sun 4 or Sparcstation, running SunOS 4 +TDEPFILES= sparc-tdep.o solib.o +TM_FILE= tm-sun4os4.h diff --git a/gdb/config/sparc/sun4sol2.mh b/gdb/config/sparc/sun4sol2.mh new file mode 100644 index 0000000..468b362 --- /dev/null +++ b/gdb/config/sparc/sun4sol2.mh @@ -0,0 +1,18 @@ +# Host: Sun 4 or Sparcstation, running Solaris 2 + +XM_FILE= xm-sun4sol2.h +XDEPFILES= ser-tcp.o +XM_CLIBS= -lsocket -lnsl + +NAT_FILE= nm-sun4sol2.h +NATDEPFILES= corelow.o core-sol2.o solib.o procfs.o fork-child.o + +# If you are compiling with Sun's compiler, add the -xs option to CC +# (e.g. `make CC="cc -xs"'). +# Sun's compilers require the -xs option to produce debug information +# in the final linked executable. Otherwise they leave it in the .o +# files only, with undocumented pointers to it in the linked executable. +# This is commented out because we don't assume that the Sun compiler +# is in use. +#MH_CFLAGS=-xs +HOST_IPC=-DBSD_IPC diff --git a/gdb/config/sparc/sun4sol2.mt b/gdb/config/sparc/sun4sol2.mt new file mode 100644 index 0000000..af70e9f --- /dev/null +++ b/gdb/config/sparc/sun4sol2.mt @@ -0,0 +1,3 @@ +# Target: Sun 4 or Sparcstation, running Solaris 2 +TDEPFILES= sparc-tdep.o +TM_FILE= tm-sun4sol2.h diff --git a/gdb/config/sparc/tm-linux.h b/gdb/config/sparc/tm-linux.h new file mode 100644 index 0000000..2cc708a --- /dev/null +++ b/gdb/config/sparc/tm-linux.h @@ -0,0 +1,29 @@ +/* Macro definitions for GDB for a Sparc running Linux. + Copyright 1989, 1992, 1994, 1995, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_SPARCLINUX_H +#define TM_SPARCLINUX_H + +#include "sparc/tm-sparc.h" + +#define SIGCONTEXT_PC_OFFSET 12 + +#include "tm-sysv4.h" + +#endif /* TM_SPARCLINUX_H */ diff --git a/gdb/config/sparc/tm-nbsd.h b/gdb/config/sparc/tm-nbsd.h new file mode 100644 index 0000000..1a31084 --- /dev/null +++ b/gdb/config/sparc/tm-nbsd.h @@ -0,0 +1,27 @@ +/* Macro definitions for Sparc running under NetBSD. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_NBSD_H +#define TM_NBSD_H + +#include "sparc/tm-sparc.h" + +#include "tm-nbsd.h" + +#endif /* TM_NBSD_H */ diff --git a/gdb/config/sparc/tm-sp64.h b/gdb/config/sparc/tm-sp64.h new file mode 100644 index 0000000..40a9a62 --- /dev/null +++ b/gdb/config/sparc/tm-sp64.h @@ -0,0 +1,378 @@ +/* Target machine sub-parameters for SPARC64, for GDB, the GNU debugger. + This is included by other tm-*.h files to define SPARC64 cpu-related info. + Copyright 1994, 1995, 1996, 1998 Free Software Foundation, Inc. + This is (obviously) based on the SPARC Vn (n<9) port. + Contributed by Doug Evans (dje@cygnus.com). + Further modified by Bob Manson (manson@cygnus.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDB_TARGET_IS_SPARC64 + +#ifdef __STDC__ +struct value; +#endif + +/* Eeeew. Ok, we have to assume (for now) that the processor really is + in sparc64 mode. While this is the same instruction sequence as + on the Sparc, the stack frames are offset by +2047 (and the arguments + are 8 bytes instead of 4). */ +/* Instructions are: + std %f10, [ %fp + 0x7a7 ] + std %f8, [ %fp + 0x79f ] + std %f6, [ %fp + 0x797 ] + std %f4, [ %fp + 0x78f ] + std %f2, [ %fp + 0x787 ] + std %f0, [ %fp + 0x77f ] + std %g6, [ %fp + 0x777 ] + std %g4, [ %fp + 0x76f ] + std %g2, [ %fp + 0x767 ] + std %g0, [ %fp + 0x75f ] + std %fp, [ %fp + 0x757 ] + std %i4, [ %fp + 0x74f ] + std %i2, [ %fp + 0x747 ] + std %i0, [ %fp + 0x73f ] + nop + nop + nop + nop + rd %tbr, %o0 + st %o0, [ %fp + 0x72b ] + rd %tpc, %o0 + st %o0, [ %fp + 0x727 ] + rd %psr, %o0 + st %o0, [ %fp + 0x723 ] + rd %y, %o0 + st %o0, [ %fp + 0x71f ] + ldx [ %sp + 0x8a7 ], %o5 + ldx [ %sp + 0x89f ], %o4 + ldx [ %sp + 0x897 ], %o3 + ldx [ %sp + 0x88f ], %o2 + ldx [ %sp + 0x887 ], %o1 + call %g0 + ldx [ %sp + 0x87f ], %o0 + nop + ta 1 + nop + nop + */ + +#define CALL_DUMMY { 0x9de3bec0fd3fa7f7LL, 0xf93fa7eff53fa7e7LL,\ + 0xf13fa7dfed3fa7d7LL, 0xe93fa7cfe53fa7c7LL,\ + 0xe13fa7bfdd3fa7b7LL, 0xd93fa7afd53fa7a7LL,\ + 0xd13fa79fcd3fa797LL, 0xc93fa78fc53fa787LL,\ + 0xc13fa77fcc3fa777LL, 0xc83fa76fc43fa767LL,\ + 0xc03fa75ffc3fa757LL, 0xf83fa74ff43fa747LL,\ + 0xf03fa73f01000000LL, 0x0100000001000000LL,\ + 0x0100000091580000LL, 0xd027a72b93500000LL,\ + 0xd027a72791480000LL, 0xd027a72391400000LL,\ + 0xd027a71fda5ba8a7LL, 0xd85ba89fd65ba897LL,\ + 0xd45ba88fd25ba887LL, 0x9fc02000d05ba87fLL,\ + 0x0100000091d02001LL, 0x0100000001000000LL } + + +/* 128 is to reserve space to write the %i/%l registers that will be restored + when we resume. */ +#define CALL_DUMMY_STACK_ADJUST 128 + +#define CALL_DUMMY_LENGTH 192 + +#define CALL_DUMMY_START_OFFSET 148 + +#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + (5 * 4)) + +#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + (8 * 4)) + +#include "sparc/tm-sparc.h" + +/* Stack must be aligned on 128-bit boundaries when synthesizing + function calls. */ + +#undef STACK_ALIGN +#define STACK_ALIGN(ADDR) (((ADDR) + 15 ) & -16) + +/* Number of machine registers. */ + +#undef NUM_REGS +#define NUM_REGS 125 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ +/* Some of these registers are only accessible from priviledged mode. + They are here for kernel debuggers, etc. */ +/* FIXME: icc and xcc are currently considered separate registers. + This may have to change and consider them as just one (ccr). + Let's postpone this as long as we can. It's nice to be able to set + them individually. */ +/* FIXME: fcc0-3 are currently separate, even though they are also part of + fsr. May have to remove them but let's postpone this as long as + possible. It's nice to be able to set them individually. */ +/* FIXME: Whether to include f33, f35, etc. here is not clear. + There are advantages and disadvantages. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES \ +{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \ + \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \ + "f32", "f34", "f36", "f38", "f40", "f42", "f44", "f46", \ + "f48", "f50", "f52", "f54", "f56", "f58", "f60", "f62", \ + \ + "pc", "npc", "ccr", "fsr", "fprs", "y", "asi", \ + "ver", "tick", "pil", "pstate", \ + "tstate", "tba", "tl", "tt", "tpc", "tnpc", "wstate", \ + "cwp", "cansave", "canrestore", "cleanwin", "otherwin", \ + "asr16", "asr17", "asr18", "asr19", "asr20", "asr21", \ + "asr22", "asr23", "asr24", "asr25", "asr26", "asr27", \ + "asr28", "asr29", "asr30", "asr31", \ + /* These are here at the end to simplify removing them if we have to. */ \ + "icc", "xcc", "fcc0", "fcc1", "fcc2", "fcc3" \ +} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#if 0 /* defined in tm-sparc.h, replicated for doc purposes */ +#define G0_REGNUM 0 /* %g0 */ +#define G1_REGNUM 1 /* %g1 */ +#define O0_REGNUM 8 /* %o0 */ +#define SP_REGNUM 14 /* Contains address of top of stack, \ + which is also the bottom of the frame. */ +#define RP_REGNUM 15 /* Contains return address value, *before* \ + any windows get switched. */ +#define O7_REGNUM 15 /* Last local reg not saved on stack frame */ +#define L0_REGNUM 16 /* First local reg that's saved on stack frame + rather than in machine registers */ +#define I0_REGNUM 24 /* %i0 */ +#define FP_REGNUM 30 /* Contains address of executing stack frame */ +#define I7_REGNUM 31 /* Last local reg saved on stack frame */ +#define FP0_REGNUM 32 /* Floating point register 0 */ +#endif + +#define FP_MAX_REGNUM 80 /* 1 + last fp reg number */ + +/* #undef v8 misc. regs */ + +#undef Y_REGNUM +#undef PS_REGNUM +#undef WIM_REGNUM +#undef TBR_REGNUM +#undef PC_REGNUM +#undef NPC_REGNUM +#undef FPS_REGNUM +#undef CPS_REGNUM + +/* v9 misc. and priv. regs */ + +#define C0_REGNUM FP_MAX_REGNUM /* Start of control registers */ +#define PC_REGNUM (C0_REGNUM + 0) /* Current PC */ +#define NPC_REGNUM (C0_REGNUM + 1) /* Next PC */ +#define CCR_REGNUM (C0_REGNUM + 2) /* Condition Code Register (%xcc,%icc) */ +#define FSR_REGNUM (C0_REGNUM + 3) /* Floating Point State */ +#define FPRS_REGNUM (C0_REGNUM + 4) /* Floating Point Registers State */ +#define Y_REGNUM (C0_REGNUM + 5) /* Temp register for multiplication, etc. */ +#define ASI_REGNUM (C0_REGNUM + 6) /* Alternate Space Identifier */ +#define VER_REGNUM (C0_REGNUM + 7) /* Version register */ +#define TICK_REGNUM (C0_REGNUM + 8) /* Tick register */ +#define PIL_REGNUM (C0_REGNUM + 9) /* Processor Interrupt Level */ +#define PSTATE_REGNUM (C0_REGNUM + 10) /* Processor State */ +#define TSTATE_REGNUM (C0_REGNUM + 11) /* Trap State */ +#define TBA_REGNUM (C0_REGNUM + 12) /* Trap Base Address */ +#define TL_REGNUM (C0_REGNUM + 13) /* Trap Level */ +#define TT_REGNUM (C0_REGNUM + 14) /* Trap Type */ +#define TPC_REGNUM (C0_REGNUM + 15) /* Trap pc */ +#define TNPC_REGNUM (C0_REGNUM + 16) /* Trap npc */ +#define WSTATE_REGNUM (C0_REGNUM + 17) /* Window State */ +#define CWP_REGNUM (C0_REGNUM + 18) /* Current Window Pointer */ +#define CANSAVE_REGNUM (C0_REGNUM + 19) /* Savable Windows */ +#define CANRESTORE_REGNUM (C0_REGNUM + 20) /* Restorable Windows */ +#define CLEANWIN_REGNUM (C0_REGNUM + 21) /* Clean Windows */ +#define OTHERWIN_REGNUM (C0_REGNUM + 22) /* Other Windows */ +#define ASR_REGNUM(n) (C0_REGNUM+(23-16)+(n)) /* Ancillary State Register + (n = 16...31) */ +#define ICC_REGNUM (C0_REGNUM + 39) /* 32 bit condition codes */ +#define XCC_REGNUM (C0_REGNUM + 40) /* 64 bit condition codes */ +#define FCC0_REGNUM (C0_REGNUM + 41) /* fp cc reg 0 */ +#define FCC1_REGNUM (C0_REGNUM + 42) /* fp cc reg 1 */ +#define FCC2_REGNUM (C0_REGNUM + 43) /* fp cc reg 2 */ +#define FCC3_REGNUM (C0_REGNUM + 44) /* fp cc reg 3 */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. + Some of the registers aren't 64 bits, but it's a lot simpler just to assume + they all are (since most of them are). */ +#undef REGISTER_BYTES +#define REGISTER_BYTES (32*8+32*8+45*8) + +/* Index within `registers' of the first byte of the space for + register N. */ +#undef REGISTER_BYTE +#define REGISTER_BYTE(N) \ + ((N) < 32 ? (N)*8 \ + : (N) < 64 ? 32*8 + ((N)-32)*4 \ + : (N) < C0_REGNUM ? 32*8 + 32*4 + ((N)-64)*8 \ + : 64*8 + ((N)-C0_REGNUM)*8) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#undef REGISTER_SIZE +#define REGISTER_SIZE 8 + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#undef REGISTER_RAW_SIZE +#define REGISTER_RAW_SIZE(N) \ + ((N) < 32 ? 8 : (N) < 64 ? 4 : 8) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#undef REGISTER_VIRTUAL_SIZE +#define REGISTER_VIRTUAL_SIZE(N) \ + ((N) < 32 ? 8 : (N) < 64 ? 4 : 8) + +/* Largest value REGISTER_RAW_SIZE can have. */ +/* tm-sparc.h defines this as 8, but play it safe. */ + +#undef MAX_REGISTER_RAW_SIZE +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ +/* tm-sparc.h defines this as 8, but play it safe. */ + +#undef MAX_REGISTER_VIRTUAL_SIZE +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#undef REGISTER_VIRTUAL_TYPE +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) < 32 ? builtin_type_long_long \ + : (N) < 64 ? builtin_type_float \ + : (N) < 80 ? builtin_type_double \ + : builtin_type_long_long) + +/* We use to support both 32 bit and 64 bit pointers. + We can't anymore because TARGET_PTR_BIT must now be a constant. */ +#undef TARGET_PTR_BIT +#define TARGET_PTR_BIT 64 + +/* Longs are 64 bits. */ +#undef TARGET_LONG_BIT +#define TARGET_LONG_BIT 64 + +#undef TARGET_LONG_LONG_BIT +#define TARGET_LONG_LONG_BIT 64 + +/* Does the specified function use the "struct returning" convention + or the "value returning" convention? The "value returning" convention + almost invariably returns the entire value in registers. The + "struct returning" convention often returns the entire value in + memory, and passes a pointer (out of or into the function) saying + where the value (is or should go). + + Since this sometimes depends on whether it was compiled with GCC, + this is also an argument. This is used in call_function to build a + stack, and in value_being_returned to print return values. + + On Sparc64, we only pass pointers to structs if they're larger then + 32 bytes. Otherwise they're stored in %o0-%o3 (floating-point + values go into %fp0-%fp3). */ + + +#undef USE_STRUCT_CONVENTION +#define USE_STRUCT_CONVENTION(gcc_p, type) (TYPE_LENGTH (type) > 32) + +#undef REG_STRUCT_HAS_ADDR +#define REG_STRUCT_HAS_ADDR(gcc_p,type) (TYPE_LENGTH (type) > 32) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ +/* FIXME: V9 uses %o0 for this. */ + +#undef STORE_STRUCT_RETURN +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); } + +/* Return number of bytes at start of arglist that are not really args. */ + +#undef FRAME_ARGS_SKIP +#define FRAME_ARGS_SKIP 136 + +/* Offsets into jmp_buf. + FIXME: This was borrowed from the v8 stuff and will probably have to change + for v9. */ + +#define JB_ELEMENT_SIZE 8 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +extern CORE_ADDR sparc64_read_sp (); +extern CORE_ADDR sparc64_read_fp (); +extern void sparc64_write_sp PARAMS ((CORE_ADDR)); +extern void sparc64_write_fp PARAMS ((CORE_ADDR)); + +#define TARGET_READ_SP() (sparc64_read_sp ()) +#define TARGET_READ_FP() (sparc64_read_fp ()) +#define TARGET_WRITE_SP(X) (sparc64_write_sp (X)) +#define TARGET_WRITE_FP(X) (sparc64_write_fp (X)) + +#undef TM_PRINT_INSN_MACH +#define TM_PRINT_INSN_MACH bfd_mach_sparc_v9a + +CORE_ADDR sp64_push_arguments PARAMS ((int, struct value **, CORE_ADDR, unsigned char, CORE_ADDR)); +#undef PUSH_ARGUMENTS +#define PUSH_ARGUMENTS(A,B,C,D,E) (sp = sp64_push_arguments ((A), (B), (C), (D), (E))) + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + sparc64_extract_return_value(TYPE, REGBUF, VALBUF, 0) +extern void +sparc64_extract_return_value PARAMS ((struct type *, char [], char *, int)); diff --git a/gdb/config/sparc/tm-sp64sim.h b/gdb/config/sparc/tm-sp64sim.h new file mode 100644 index 0000000..4545f32 --- /dev/null +++ b/gdb/config/sparc/tm-sp64sim.h @@ -0,0 +1,50 @@ +/* Macro definitions for GDB with the SPARC64 Simulator. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* ??? This file is based on tm-spc-em.h. Our contents are probably bogus + but it's a good start. */ + +#include "sparc/tm-sp64.h" +#include "tm-sunos.h" + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 8 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) diff --git a/gdb/config/sparc/tm-sparc.h b/gdb/config/sparc/tm-sparc.h new file mode 100644 index 0000000..ecbe9e2 --- /dev/null +++ b/gdb/config/sparc/tm-sparc.h @@ -0,0 +1,584 @@ +/* Target machine sub-parameters for SPARC, for GDB, the GNU debugger. + This is included by other tm-*.h files to define SPARC cpu-related info. + Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994 + Free Software Foundation, Inc. + Contributed by Michael Tiemann (tiemann@mcc.com) + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifdef __STDC__ +struct frame_info; +struct type; +struct value; +#endif + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Floating point is IEEE compatible. */ +#define IEEE_FLOAT + +/* If an argument is declared "register", Sun cc will keep it in a register, + never saving it onto the stack. So we better not believe the "p" symbol + descriptor stab. */ + +#define USE_REGISTER_NOT_ARG + +/* When passing a structure to a function, Sun cc passes the address + not the structure itself. It (under SunOS4) creates two symbols, + which we need to combine to a LOC_REGPARM. Gcc version two (as of + 1.92) behaves like sun cc. REG_STRUCT_HAS_ADDR is smart enough to + distinguish between Sun cc, gcc version 1 and gcc version 2. */ + +#define REG_STRUCT_HAS_ADDR(gcc_p,type) (gcc_p != 1) + +/* Sun /bin/cc gets this right as of SunOS 4.1.x. We need to define + BELIEVE_PCC_PROMOTION to get this right now that the code which + detects gcc2_compiled. is broken. This loses for SunOS 4.0.x and + earlier. */ + +#define BELIEVE_PCC_PROMOTION 1 + +/* For acc, there's no need to correct LBRAC entries by guessing how + they should work. In fact, this is harmful because the LBRAC + entries now all appear at the end of the function, not intermixed + with the SLINE entries. n_opt_found detects acc for Solaris binaries; + function_stab_type detects acc for SunOS4 binaries. + + For binary from SunOS4 /bin/cc, need to correct LBRAC's. + + For gcc, like acc, don't correct. */ + +#define SUN_FIXED_LBRAC_BUG \ + (n_opt_found \ + || function_stab_type == N_STSYM \ + || function_stab_type == N_GSYM \ + || processing_gcc_compilation) + +/* Do variables in the debug stabs occur after the N_LBRAC or before it? + acc: after, gcc: before, SunOS4 /bin/cc: before. */ + +#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) \ + (!(gcc_p) \ + && (n_opt_found \ + || function_stab_type == N_STSYM \ + || function_stab_type == N_GSYM)) + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. SKIP_PROLOGUE_FRAMELESS_P advances + the PC past some of the prologue, but stops as soon as it + knows that the function has a frame. Its result is equal + to its input PC if the function is frameless, unequal otherwise. */ + +#define SKIP_PROLOGUE(pc) \ + { pc = skip_prologue (pc, 0); } +#define SKIP_PROLOGUE_FRAMELESS_P(pc) \ + { pc = skip_prologue (pc, 1); } +extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR, int)); + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +/* On the Sun 4 under SunOS, the compile will leave a fake insn which + encodes the structure size being returned. If we detect such + a fake insn, step past it. */ + +#define PC_ADJUST(pc) sparc_pc_adjust(pc) +extern CORE_ADDR sparc_pc_adjust PARAMS ((CORE_ADDR)); + +#define SAVED_PC_AFTER_CALL(frame) PC_ADJUST (read_register (RP_REGNUM)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Stack must be aligned on 64-bit boundaries when synthesizing + function calls. */ + +#define STACK_ALIGN(ADDR) (((ADDR) + 7) & -8) + +/* Sequence of bytes for breakpoint instruction (ta 1). */ + +#define BREAKPOINT {0x91, 0xd0, 0x20, 0x01} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 72 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES \ +{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \ + \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \ + \ + "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr" } + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define G0_REGNUM 0 /* %g0 */ +#define G1_REGNUM 1 /* %g1 */ +#define O0_REGNUM 8 /* %o0 */ +#define SP_REGNUM 14 /* Contains address of top of stack, \ + which is also the bottom of the frame. */ +#define RP_REGNUM 15 /* Contains return address value, *before* \ + any windows get switched. */ +#define O7_REGNUM 15 /* Last local reg not saved on stack frame */ +#define L0_REGNUM 16 /* First local reg that's saved on stack frame + rather than in machine registers */ +#define I0_REGNUM 24 /* %i0 */ +#define FP_REGNUM 30 /* Contains address of executing stack frame */ +#define I7_REGNUM 31 /* Last local reg saved on stack frame */ +#define FP0_REGNUM 32 /* Floating point register 0 */ +#define Y_REGNUM 64 /* Temp register for multiplication, etc. */ +#define PS_REGNUM 65 /* Contains processor status */ +#define PS_FLAG_CARRY 0x100000 /* Carry bit in PS */ +#define WIM_REGNUM 66 /* Window Invalid Mask (not really supported) */ +#define TBR_REGNUM 67 /* Trap Base Register (not really supported) */ +#define PC_REGNUM 68 /* Contains program counter */ +#define NPC_REGNUM 69 /* Contains next PC */ +#define FPS_REGNUM 70 /* Floating point status register */ +#define CPS_REGNUM 71 /* Coprocessor status register */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. On the sparc, `registers' + contains the ins and locals, even though they are saved on the + stack rather than with the other registers, and this causes hair + and confusion in places like pop_frame. It might be + better to remove the ins and locals from `registers', make sure + that get_saved_register can get them from the stack (even in the + innermost frame), and make this the way to access them. For the + frame pointer we would do that via TARGET_READ_FP. On the other hand, + that is likely to be confusing or worse for flat frames. */ + +#define REGISTER_BYTES (32*4+32*4+8*4) + +/* Index within `registers' of the first byte of the space for + register N. */ +/* ?? */ +#define REGISTER_BYTE(N) ((N)*4) + +/* We need to override GET_SAVED_REGISTER so that we can deal with the way + outs change into ins in different frames. HAVE_REGISTER_WINDOWS can't + deal with this case and also handle flat frames at the same time. */ + +#define GET_SAVED_REGISTER 1 + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +/* On the SPARC, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) (4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +/* On the SPARC, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) (4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) < 32 ? builtin_type_int : (N) < 64 ? builtin_type_float : \ + builtin_type_int) + +/* Writing to %g0 is a noop (not an error or exception or anything like + that, however). */ + +#define CANNOT_STORE_REGISTER(regno) ((regno) == G0_REGNUM) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function_by_hand. + The ultimate mystery is, tho, what is the value "16"? */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { char val[4]; \ + store_unsigned_integer (val, 4, (ADDR)); \ + write_memory ((SP)+(16*4), val, 4); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + sparc_extract_return_value(TYPE, REGBUF, VALBUF) +extern void +sparc_extract_return_value PARAMS ((struct type *, char [], char *)); + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + sparc_store_return_value(TYPE, VALBUF) +extern void sparc_store_return_value PARAMS ((struct type *, char *)); + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (sparc_extract_struct_value_address (REGBUF)) + +extern CORE_ADDR +sparc_extract_struct_value_address PARAMS ((char [REGISTER_BYTES])); + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the Sun 4, the frame-chain's nominal address + is held in the frame pointer register. + + On the Sun4, the frame (in %fp) is %sp for the previous frame. + From the previous frame's %sp, we can find the previous frame's + %fp: it is in the save area just above the previous frame's %sp. + + If we are setting up an arbitrary frame, we'll need to know where + it ends. Hence the following. This part of the frame cache + structure should be checked before it is assumed that this frame's + bottom is in the stack pointer. + + If there isn't a frame below this one, the bottom of this frame is + in the stack pointer. + + If there is a frame below this one, and the frame pointers are + identical, it's a leaf frame and the bottoms are the same also. + + Otherwise the bottom of this frame is the top of the next frame. + + The bottom field is misnamed, since it might imply that memory from + bottom to frame contains this frame. That need not be true if + stack frames are allocated in different segments (e.g. some on a + stack, some on a heap in the data segment). + + GCC 2.6 and later can generate ``flat register window'' code that + makes frames by explicitly saving those registers that need to be + saved. %i7 is used as the frame pointer, and the frame is laid out so + that flat and non-flat calls can be intermixed freely within a + program. Unfortunately for GDB, this means it must detect and record + the flatness of frames. + + Since the prologue in a flat frame also tells us where fp and pc + have been stashed (the frame is of variable size, so their location + is not fixed), it's convenient to record them in the frame info. */ + +#define EXTRA_FRAME_INFO \ + CORE_ADDR bottom; \ + int in_prologue; \ + int flat; \ + /* Following fields only relevant for flat frames. */ \ + CORE_ADDR pc_addr; \ + CORE_ADDR fp_addr; \ + /* Add this to ->frame to get the value of the stack pointer at the */ \ + /* time of the register saves. */ \ + int sp_offset; + +#define FRAME_INIT_SAVED_REGS(fp) /*no-op*/ + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) \ + sparc_init_extra_frame_info (fromleaf, fci) +extern void sparc_init_extra_frame_info PARAMS((int, struct frame_info *)); + +#define PRINT_EXTRA_FRAME_INFO(fi) \ + { \ + if ((fi) && (fi)->flat) \ + printf_filtered (" flat, pc saved at 0x%x, fp saved at 0x%x\n", \ + (fi)->pc_addr, (fi)->fp_addr); \ + } + +#define FRAME_CHAIN(thisframe) (sparc_frame_chain (thisframe)) +extern CORE_ADDR sparc_frame_chain PARAMS ((struct frame_info *)); + +/* INIT_EXTRA_FRAME_INFO needs the PC to detect flat frames. */ + +#define INIT_FRAME_PC(fromleaf, prev) /* nothing */ +#define INIT_FRAME_PC_FIRST(fromleaf, prev) \ + (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \ + (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ()); + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +/* The location of I0 w.r.t SP. This is actually dependent on how the system's + window overflow/underflow routines are written. Most vendors save the L regs + followed by the I regs (at the higher address). Some vendors get it wrong. + */ + +#define FRAME_SAVED_L0 0 +#define FRAME_SAVED_I0 (8 * REGISTER_RAW_SIZE (L0_REGNUM)) + +/* Where is the PC for a specific frame */ + +#define FRAME_SAVED_PC(FRAME) sparc_frame_saved_pc (FRAME) +extern CORE_ADDR sparc_frame_saved_pc PARAMS ((struct frame_info *)); + +/* If the argument is on the stack, it will be here. */ +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_STRUCT_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 68 + +/* Things needed for making the inferior call functions. */ +/* + * First of all, let me give my opinion of what the DUMMY_FRAME + * actually looks like. + * + * | | + * | | + * + - - - - - - - - - - - - - - - - +<-- fp (level 0) + * | | + * | | + * | | + * | | + * | Frame of innermost program | + * | function | + * | | + * | | + * | | + * | | + * | | + * |---------------------------------|<-- sp (level 0), fp (c) + * | | + * DUMMY | fp0-31 | + * | | + * | ------ |<-- fp - 0x80 + * FRAME | g0-7 |<-- fp - 0xa0 + * | i0-7 |<-- fp - 0xc0 + * | other |<-- fp - 0xe0 + * | ? | + * | ? | + * |---------------------------------|<-- sp' = fp - 0x140 + * | | + * xcution start | | + * sp' + 0x94 -->| CALL_DUMMY (x code) | + * | | + * | | + * |---------------------------------|<-- sp'' = fp - 0x200 + * | align sp to 8 byte boundary | + * | ==> args to fn <== | + * Room for | | + * i & l's + agg | CALL_DUMMY_STACK_ADJUST = 0x0x44| + * |---------------------------------|<-- final sp (variable) + * | | + * | Where function called will | + * | build frame. | + * | | + * | | + * + * I understand everything in this picture except what the space + * between fp - 0xe0 and fp - 0x140 is used for. Oh, and I don't + * understand why there's a large chunk of CALL_DUMMY that never gets + * executed (its function is superceeded by PUSH_DUMMY_FRAME; they + * are designed to do the same thing). + * + * PUSH_DUMMY_FRAME saves the registers above sp' and pushes the + * register file stack down one. + * + * call_function then writes CALL_DUMMY, pushes the args onto the + * stack, and adjusts the stack pointer. + * + * run_stack_dummy then starts execution (in the middle of + * CALL_DUMMY, as directed by call_function). + */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME sparc_push_dummy_frame () +#define POP_FRAME sparc_pop_frame () + +void sparc_push_dummy_frame PARAMS ((void)), sparc_pop_frame PARAMS ((void)); + +#ifndef CALL_DUMMY +/* This sequence of words is the instructions + + 0: bc 10 00 01 mov %g1, %fp + 4: 9d e3 80 00 save %sp, %g0, %sp + 8: bc 10 00 02 mov %g2, %fp + c: be 10 00 03 mov %g3, %i7 + 10: da 03 a0 58 ld [ %sp + 0x58 ], %o5 + 14: d8 03 a0 54 ld [ %sp + 0x54 ], %o4 + 18: d6 03 a0 50 ld [ %sp + 0x50 ], %o3 + 1c: d4 03 a0 4c ld [ %sp + 0x4c ], %o2 + 20: d2 03 a0 48 ld [ %sp + 0x48 ], %o1 + 24: 40 00 00 00 call <fun> + 28: d0 03 a0 44 ld [ %sp + 0x44 ], %o0 + 2c: 01 00 00 00 nop + 30: 91 d0 20 01 ta 1 + 34: 01 00 00 00 nop + + NOTES: + * the first four instructions are necessary only on the simulator. + * this is a multiple of 8 (not only 4) bytes. + * the `call' insn is a relative, not an absolute call. + * the `nop' at the end is needed to keep the trap from + clobbering things (if NPC pointed to garbage instead). +*/ + +#define CALL_DUMMY { 0xbc100001, 0x9de38000, 0xbc100002, 0xbe100003, \ + 0xda03a058, 0xd803a054, 0xd603a050, 0xd403a04c, \ + 0xd203a048, 0x40000000, 0xd003a044, 0x01000000, \ + 0x91d02001, 0x01000000 } + + +/* Size of the call dummy in bytes. */ + +#define CALL_DUMMY_LENGTH 0x38 + +/* Offset within call dummy of first instruction to execute. */ + +#define CALL_DUMMY_START_OFFSET 0 + +/* Offset within CALL_DUMMY of the 'call' instruction. */ + +#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + 0x24) + +/* Offset within CALL_DUMMY of the 'ta 1' instruction. */ + +#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 0x30) + +#define CALL_DUMMY_STACK_ADJUST 68 + +#endif +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + sparc_fix_call_dummy (dummyname, pc, fun, type, gcc_p) +void sparc_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun, + struct type *value_type, int using_gcc)); + +/* The Sparc returns long doubles on the stack. */ + +#define RETURN_VALUE_ON_STACK(TYPE) \ + (TYPE_CODE(TYPE) == TYPE_CODE_FLT \ + && TYPE_LENGTH(TYPE) > 8) + +/* Sparc has no reliable single step ptrace call */ + +#define SOFTWARE_SINGLE_STEP_P 1 +extern void sparc_software_single_step PARAMS ((unsigned int, int)); +#define SOFTWARE_SINGLE_STEP(sig,bp_p) sparc_software_single_step (sig,bp_p) + +/* We need more arguments in a frame specification for the + "frame" or "info frame" command. */ + +#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) +extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *)); + +/* To print every pair of float registers as a double, we use this hook. + We also print the condition code registers in a readable format + (FIXME: can expand this to all control regs). */ + +#undef PRINT_REGISTER_HOOK +#define PRINT_REGISTER_HOOK(regno) \ + sparc_print_register_hook (regno) +extern void sparc_print_register_hook PARAMS ((int regno)); + + +/* Optimization for storing registers to the inferior. The hook + DO_DEFERRED_STORES + actually executes any deferred stores. It is called any time + we are going to proceed the child, or read its registers. + The hook CLEAR_DEFERRED_STORES is called when we want to throw + away the inferior process, e.g. when it dies or we kill it. + FIXME, this does not handle remote debugging cleanly. */ + +extern int deferred_stores; +#define DO_DEFERRED_STORES \ + if (deferred_stores) \ + target_store_registers (-2); +#define CLEAR_DEFERRED_STORES \ + deferred_stores = 0; + +/* If the current gcc for for this target does not produce correct debugging + information for float parameters, both prototyped and unprototyped, then + define this macro. This forces gdb to always assume that floats are + passed as doubles and then converted in the callee. */ + +#define COERCE_FLOAT_TO_DOUBLE 1 + +/* Select the sparc disassembler */ + +#define TM_PRINT_INSN_MACH bfd_mach_sparc + +/* Arguments smaller than an int must promoted to ints when synthesizing + function calls. */ + +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = sparc_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)) +extern CORE_ADDR +sparc_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); diff --git a/gdb/config/sparc/tm-sparclet.h b/gdb/config/sparc/tm-sparclet.h new file mode 100644 index 0000000..bc43083 --- /dev/null +++ b/gdb/config/sparc/tm-sparclet.h @@ -0,0 +1,132 @@ +/* Target machine definitions for GDB for an embedded SPARC. + Copyright 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sparc/tm-sparc.h" + +#define TARGET_SPARCLET 1 + +/* Select the sparclet disassembler. Slightly different instruction set from + the V8 sparc. */ + +#undef TM_PRINT_INSN_MACH +#define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclet + +/* overrides of tm-sparc.h */ + +#undef TARGET_BYTE_ORDER +#define TARGET_BYTE_ORDER_SELECTABLE + +/* Sequence of bytes for breakpoint instruction (ta 1). */ +#undef BREAKPOINT +#define BIG_BREAKPOINT {0x91, 0xd0, 0x20, 0x01} +#define LITTLE_BREAKPOINT {0x01, 0x20, 0xd0, 0x91} + +#undef NUM_REGS /* formerly "72" */ +/* WIN FP CPU CCP ASR AWR APSR */ +#define NUM_REGS (32 + 32 + 8 + 8 + 8/*+ 32 + 1*/) + +#undef REGISTER_BYTES /* formerly "(32*4 + 32*4 + 8*4)" */ +#define REGISTER_BYTES (32*4 + 32*4 + 8*4 + 8*4 + 8*4/* + 32*4 + 1*4*/) + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ +/* Sparclet has no fp! */ +/* Compiler maps types for floats by number, so can't + change the numbers here. */ + +#undef REGISTER_NAMES +#define REGISTER_NAMES \ +{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + "o0", "o1", "o2", "o3", "o4", "o5", "o6", "o7", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", "i6", "i7", \ + \ + "", "", "", "", "", "", "", "", /* no FPU regs */ \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + "", "", "", "", "", "", "", "", \ + /* no CPSR, FPSR */ \ + "y", "psr", "wim", "tbr", "pc", "npc", "", "", \ + \ + "ccsr", "ccpr", "cccrcr", "ccor", "ccobr", "ccibr", "ccir", "", \ + \ + /* ASR15 ASR19 (don't display them) */ \ + "asr1", "", "asr17", "asr18", "", "asr20", "asr21", "asr22", \ +/* \ + "awr0", "awr1", "awr2", "awr3", "awr4", "awr5", "awr6", "awr7", \ + "awr8", "awr9", "awr10", "awr11", "awr12", "awr13", "awr14", "awr15", \ + "awr16", "awr17", "awr18", "awr19", "awr20", "awr21", "awr22", "awr23", \ + "awr24", "awr25", "awr26", "awr27", "awr28", "awr29", "awr30", "awr31", \ + "apsr", \ + */ \ +} + +/* Remove FP dependant code which was defined in tm-sparc.h */ +#undef FP0_REGNUM /* Floating point register 0 */ +#undef FPS_REGNUM /* Floating point status register */ +#undef CPS_REGNUM /* Coprocessor status register */ + +/* sparclet register numbers */ +#define CCSR_REGNUM 72 + +#undef EXTRACT_RETURN_VALUE +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + { \ + memcpy ((VALBUF), \ + (char *)(REGBUF) + REGISTER_RAW_SIZE (O0_REGNUM) * 8 + \ + (TYPE_LENGTH(TYPE) >= REGISTER_RAW_SIZE (O0_REGNUM) \ + ? 0 : REGISTER_RAW_SIZE (O0_REGNUM) - TYPE_LENGTH(TYPE)), \ + TYPE_LENGTH(TYPE)); \ + } +#undef STORE_RETURN_VALUE +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + { \ + /* Other values are returned in register %o0. */ \ + write_register_bytes (REGISTER_BYTE (O0_REGNUM), (VALBUF), \ + TYPE_LENGTH (TYPE)); \ + } + +#undef PRINT_REGISTER_HOOK +#define PRINT_REGISTER_HOOK(regno) + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) diff --git a/gdb/config/sparc/tm-sparclite.h b/gdb/config/sparc/tm-sparclite.h new file mode 100644 index 0000000..d841f89 --- /dev/null +++ b/gdb/config/sparc/tm-sparclite.h @@ -0,0 +1,98 @@ +/* Macro definitions for GDB for a Fujitsu SPARClite. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_SPARCLITE 1 + +#include "sparc/tm-sparc.h" + +/* overrides of tm-sparc.h */ + +#undef TARGET_BYTE_ORDER +#define TARGET_BYTE_ORDER_SELECTABLE + +/* Select the sparclite disassembler. Slightly different instruction set from + the V8 sparc. */ + +#undef TM_PRINT_INSN_MACH +#define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclite + +/* Amount PC must be decremented by after a hardware instruction breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_HW_BREAK 4 + +#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi) + +#undef NUM_REGS +#define NUM_REGS 80 + +#undef REGISTER_BYTES +#define REGISTER_BYTES (32*4+32*4+8*4+8*4) + +#undef REGISTER_NAMES +#define REGISTER_NAMES \ +{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ + "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \ + "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \ + \ + "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ + "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ + "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \ + "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \ + \ + "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr", \ + "dia1", "dia2", "dda1", "dda2", "ddv1", "ddv2", "dcr", "dsr" } + +#define DIA1_REGNUM 72 /* debug instr address register 1 */ +#define DIA2_REGNUM 73 /* debug instr address register 2 */ +#define DDA1_REGNUM 74 /* debug data address register 1 */ +#define DDA2_REGNUM 75 /* debug data address register 2 */ +#define DDV1_REGNUM 76 /* debug data value register 1 */ +#define DDV2_REGNUM 77 /* debug data value register 2 */ +#define DCR_REGNUM 78 /* debug control register */ +#define DSR_REGNUM 79 /* debug status regsiter */ + +#define TARGET_HW_BREAK_LIMIT 2 +#define TARGET_HW_WATCH_LIMIT 2 + +/* Enable watchpoint macro's */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + sparclite_check_watch_resources (type, cnt, ot) + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. *** + +#define STOPPED_BY_WATCHPOINT(W) \ + ((W).kind == TARGET_WAITKIND_STOPPED \ + && (W).value.sig == TARGET_SIGNAL_TRAP \ + && ((int) read_register (IPSW_REGNUM) & 0x00100000)) +*/ + +/* Use these macros for watchpoint insertion/deletion. */ +#define target_insert_watchpoint(addr, len, type) sparclite_insert_watchpoint (addr, len, type) +#define target_remove_watchpoint(addr, len, type) sparclite_remove_watchpoint (addr, len, type) +#define target_insert_hw_breakpoint(addr, len) sparclite_insert_hw_breakpoint (addr, len) +#define target_remove_hw_breakpoint(addr, len) sparclite_remove_hw_breakpoint (addr, len) +#define target_stopped_data_address() sparclite_stopped_data_address() diff --git a/gdb/config/sparc/tm-sparclynx.h b/gdb/config/sparc/tm-sparclynx.h new file mode 100644 index 0000000..5a0d908 --- /dev/null +++ b/gdb/config/sparc/tm-sparclynx.h @@ -0,0 +1,36 @@ +/* Macro definitions for Sparc running under LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_SPARCLYNX_H +#define TM_SPARCLYNX_H + +#include "tm-lynx.h" + +/* Use generic Sparc definitions. */ +#include "sparc/tm-sparc.h" + +/* Lynx does this backwards from everybody else */ + +#undef FRAME_SAVED_I0 +#undef FRAME_SAVED_L0 + +#define FRAME_SAVED_I0 0 +#define FRAME_SAVED_L0 (8 * REGISTER_RAW_SIZE (I0_REGNUM)) + +#endif /* TM_SPARCLYNX_H */ diff --git a/gdb/config/sparc/tm-spc-em.h b/gdb/config/sparc/tm-spc-em.h new file mode 100644 index 0000000..3a9b457 --- /dev/null +++ b/gdb/config/sparc/tm-spc-em.h @@ -0,0 +1,46 @@ +/* Target machine definitions for GDB for an embedded SPARC. + Copyright 1989, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sparc/tm-sparc.h" + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) diff --git a/gdb/config/sparc/tm-sun4os4.h b/gdb/config/sparc/tm-sun4os4.h new file mode 100644 index 0000000..985e18c --- /dev/null +++ b/gdb/config/sparc/tm-sun4os4.h @@ -0,0 +1,58 @@ +/* Macro definitions for GDB for a Sun 4 running sunos 4. + Copyright 1989, 1992, 1994, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sparc/tm-sparc.h" +#include "tm-sunos.h" + +/* Redefine SKIP_TRAMPOLINE_CODE to handle PIC compiled modules + in main executables. */ + +#undef SKIP_TRAMPOLINE_CODE +#define SKIP_TRAMPOLINE_CODE(pc) sunos4_skip_trampoline_code (pc) +extern CORE_ADDR sunos4_skip_trampoline_code PARAMS ((CORE_ADDR)); + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) + +extern char *sunpro_static_transform_name PARAMS ((char *)); +#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x) +#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '$') diff --git a/gdb/config/sparc/tm-sun4sol2.h b/gdb/config/sparc/tm-sun4sol2.h new file mode 100644 index 0000000..7bab6e6 --- /dev/null +++ b/gdb/config/sparc/tm-sun4sol2.h @@ -0,0 +1,94 @@ +/* Macro definitions for GDB for a Sun 4 running Solaris 2 + Copyright 1989, 1992, 1993, 1994, 1995, 1997, 1998 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sparc/tm-sparc.h" +#include "tm-sysv4.h" + +/* There are two different signal handler trampolines in Solaris2. */ +#define IN_SIGTRAMP(pc, name) \ + ((name) \ + && (STREQ ("sigacthandler", name) || STREQ ("ucbsigvechandler", name))) + +/* The signal handler gets a pointer to an ucontext as third argument + if it is called from sigacthandler. This is the offset to the saved + PC within it. sparc_frame_saved_pc knows how to deal with + ucbsigvechandler. */ +#define SIGCONTEXT_PC_OFFSET 44 + +#if 0 /* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */ + +/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a + comment in <machine/setjmp.h>! */ + +#define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ + +#define JB_ONSSTACK 0 +#define JB_SIGMASK 1 +#define JB_SP 2 +#define JB_PC 3 +#define JB_NPC 4 +#define JB_PSR 5 +#define JB_G1 6 +#define JB_O0 7 +#define JB_WBCNT 8 + +/* Figure out where the longjmp will land. We expect that we have just entered + longjmp and haven't yet setup the stack frame, so the args are still in the + output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we + extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. + This routine returns true on success */ + +extern int +get_longjmp_target PARAMS ((CORE_ADDR *)); + +#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) +#endif /* 0 */ + +/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols, + and for SunPRO 3.0, N_FUN symbols too. */ +#define SOFUN_ADDRESS_MAYBE_MISSING + +extern char *sunpro_static_transform_name PARAMS ((char *)); +#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x) +#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '$') + +#define FAULTED_USE_SIGINFO + +/* Enable handling of shared libraries for a.out executables. */ +#define HANDLE_SVR4_EXEC_EMULATORS + +/* Macros to extract process id and thread id from a composite pid/tid */ +#define PIDGET(pid) ((pid) & 0xffff) +#define TIDGET(pid) (((pid) >> 16) & 0xffff) + +/* Macro to extract carry from given regset. */ +#define PROCFS_GET_CARRY(regset) ((regset)[R_PSR] & PS_FLAG_CARRY) + +#ifdef HAVE_THREAD_DB_LIB + +extern char *solaris_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) solaris_pid_to_str (PID) + +#else + +extern char *procfs_pid_to_str PARAMS ((int pid)); +#define target_pid_to_str(PID) procfs_pid_to_str (PID) + +#endif diff --git a/gdb/config/sparc/tm-vxsparc.h b/gdb/config/sparc/tm-vxsparc.h new file mode 100644 index 0000000..6612943 --- /dev/null +++ b/gdb/config/sparc/tm-vxsparc.h @@ -0,0 +1,36 @@ +/* Target machine description for VxWorks sparc's, for GDB, the GNU debugger. + Copyright 1993 Free Software Foundation, Inc. + Contributed by Cygnus Support. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define GDBINIT_FILENAME ".vxgdbinit" + +#define DEFAULT_PROMPT "(vxgdb) " + +#include "sparc/tm-spc-em.h" + +/* FIXME: These are almost certainly wrong. */ + +/* Number of registers in a ptrace_getregs call. */ + +#define VX_NUM_REGS (NUM_REGS) + +/* Number of registers in a ptrace_getfpregs call. */ + +/* #define VX_SIZE_FPREGS (don't know how many) */ + diff --git a/gdb/config/sparc/vxsparc.mt b/gdb/config/sparc/vxsparc.mt new file mode 100644 index 0000000..9eadd17 --- /dev/null +++ b/gdb/config/sparc/vxsparc.mt @@ -0,0 +1,3 @@ +# Target: SPARC running VxWorks +TDEPFILES= sparc-tdep.o remote-vx.o remote-vxsparc.o xdr_ld.o xdr_ptrace.o xdr_rdb.o +TM_FILE= tm-vxsparc.h diff --git a/gdb/config/sparc/xm-linux.h b/gdb/config/sparc/xm-linux.h new file mode 100644 index 0000000..7d68b63 --- /dev/null +++ b/gdb/config/sparc/xm-linux.h @@ -0,0 +1,48 @@ +/* Macro definitions for running gdb on a Sparc running Linux. + Copyright (C) 1989, 1993, 1994, 1995, 1996, 1998 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef XM_SPARCLINUX_H +#define XM_SPARCLINUX_H + +#include "sparc/xm-sparc.h" + +#define HAVE_TERMIOS +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ +#define KERNEL_U_ADDR 0x0 + +#define U_REGS_OFFSET 0 + +#define NEED_POSIX_SETPGID + +/* Need R_OK etc, but USG isn't defined. */ +#include <unistd.h> + +/* If you expect to use the mmalloc package to obtain mapped symbol files, + for now you have to specify some parameters that determine how gdb places + the mappings in it's address space. See the comments in map_to_address() + for details. This is expected to only be a short term solution. Yes it + is a kludge. + FIXME: Make this more automatic. */ + +#define MMAP_BASE_ADDRESS 0xE0000000 /* First mapping here */ +#define MMAP_INCREMENT 0x01000000 /* Increment to next mapping */ + +#endif /* _XM_SPARCLINUX_H */ diff --git a/gdb/config/sparc/xm-nbsd.h b/gdb/config/sparc/xm-nbsd.h new file mode 100644 index 0000000..95fe846 --- /dev/null +++ b/gdb/config/sparc/xm-nbsd.h @@ -0,0 +1,21 @@ +/* Parameters for execution on a Sparc running NetBSD, for GDB. + Copyright 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Get generic NetBSD host definitions. */ +#include "xm-nbsd.h" diff --git a/gdb/config/sparc/xm-sparc.h b/gdb/config/sparc/xm-sparc.h new file mode 100644 index 0000000..06c247e --- /dev/null +++ b/gdb/config/sparc/xm-sparc.h @@ -0,0 +1,22 @@ +/* Host definitions for a Sun 4, for GDB, the GNU debugger. + Copyright 1986, 1987, 1989, 1991, 1992, 1996 + Free Software Foundation, Inc. + Contributed by Michael Tiemann (tiemann@mcc.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN diff --git a/gdb/config/sparc/xm-sparclynx.h b/gdb/config/sparc/xm-sparclynx.h new file mode 100644 index 0000000..7e62628 --- /dev/null +++ b/gdb/config/sparc/xm-sparclynx.h @@ -0,0 +1,24 @@ +/* Host-dependent definitions for Sparc running LynxOS, for GDB. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* Get generic LynxOS host definitions. */ + +#include "xm-lynx.h" diff --git a/gdb/config/sparc/xm-sun4os4.h b/gdb/config/sparc/xm-sun4os4.h new file mode 100644 index 0000000..e50a213 --- /dev/null +++ b/gdb/config/sparc/xm-sun4os4.h @@ -0,0 +1,34 @@ +/* Macro definitions for running gdb on a Sun 4 running sunos 4. + Copyright (C) 1989, 1993, 1994, 1995, 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "sparc/xm-sparc.h" + +#define FPU + +/* /usr/include/malloc.h is included by vx-share/xdr_ld, and might + declare these using char * not void *. The following should work with + acc, gcc, or /bin/cc. */ + +#define MALLOC_INCOMPATIBLE +#include <malloc.h> + +/* SunOS 4.x uses nonstandard "char *" as type of third argument to ptrace() */ + +#define PTRACE_ARG3_TYPE char* diff --git a/gdb/config/sparc/xm-sun4sol2.h b/gdb/config/sparc/xm-sun4sol2.h new file mode 100644 index 0000000..bc49ce4 --- /dev/null +++ b/gdb/config/sparc/xm-sun4sol2.h @@ -0,0 +1,49 @@ +/* Macro definitions for running gdb on a Sun 4 running Solaris 2. + Copyright 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Most of what we know is generic to SPARC hosts. */ + +#include "sparc/xm-sparc.h" + +/* Pick up more stuff from the generic SVR4 host include file. */ + +#include "xm-sysv4.h" + +/* gdb wants to use the prgregset_t interface rather than + the gregset_t interface, partly because that's what's + used in core-sol2.c */ + +#define GDB_GREGSET_TYPE prgregset_t +#define GDB_FPREGSET_TYPE prfpregset_t + +/* These are not currently used in SVR4 (but should be, FIXME!). */ +#undef DO_DEFERRED_STORES +#undef CLEAR_DEFERRED_STORES + +/* May be needed, may be not? From Pace Willisson's port. FIXME. */ +#define NEED_POSIX_SETPGID + +/* solaris doesn't have siginterrupt, though it has sigaction; however, + in this case siginterrupt would just be setting the default. */ +#define NO_SIGINTERRUPT + +/* On sol2.7, <curses.h> emits a bunch of 'macro redefined' + warnings, which makes autoconf think curses.h doesn't + exist. Compensate fot that here. */ +#define HAVE_CURSES_H 1 diff --git a/gdb/config/tahoe/tahoe.mh b/gdb/config/tahoe/tahoe.mh new file mode 100644 index 0000000..0814c01 --- /dev/null +++ b/gdb/config/tahoe/tahoe.mh @@ -0,0 +1,4 @@ +# Host: CCI or Harris Tahoe running BSD Unix + +XM_FILE= xm-tahoe.h +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o diff --git a/gdb/config/tahoe/tahoe.mt b/gdb/config/tahoe/tahoe.mt new file mode 100644 index 0000000..b91a77e --- /dev/null +++ b/gdb/config/tahoe/tahoe.mt @@ -0,0 +1,3 @@ +# Target: CCI or Harris Tahoe running BSD Unix +TDEPFILES= tahoe-tdep.o +TM_FILE= tm-tahoe.h diff --git a/gdb/config/tahoe/tm-tahoe.h b/gdb/config/tahoe/tm-tahoe.h new file mode 100644 index 0000000..a9df374 --- /dev/null +++ b/gdb/config/tahoe/tm-tahoe.h @@ -0,0 +1,289 @@ +/* Definitions to make GDB target for a tahoe running 4.3-Reno. + Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* + * Ported by the State University of New York at Buffalo by the Distributed + * Computer Systems Lab, Department of Computer Science, 1991. + */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN +#define BITS_BIG_ENDIAN 0 + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 2 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ +{ register int op = (unsigned char) read_memory_integer (pc, 1); \ + if (op == 0x11) pc += 2; /* skip brb */ \ + if (op == 0x13) pc += 3; /* skip brw */ \ + if (op == 0x2c && \ + ((unsigned char) read_memory_integer (pc+2, 1)) == 0x5e) \ + pc += 3; /* skip subl2 */ \ + if (op == 0xe9 && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xae && \ + ((unsigned char) read_memory_integer(pc+3, 1)) == 0x5e) \ + pc += 4; /* skip movab */ \ + if (op == 0xe9 && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xce && \ + ((unsigned char) read_memory_integer(pc+4, 1)) == 0x5e) \ + pc += 5; /* skip movab */ \ + if (op == 0xe9 && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xee && \ + ((unsigned char) read_memory_integer(pc+6, 1)) == 0x5e) \ + pc += 7; /* skip movab */ \ +} + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame) + +/* Wrong for cross-debugging. I don't know the real values. */ +#include <machine/param.h> +#define TARGET_UPAGES UPAGES +#define TARGET_NBPG NBPG + +/* Address of end of stack space. */ + +#define STACK_END_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG)) + +/* On BSD, sigtramp is in the u area. Can't check the exact + addresses because for cross-debugging we don't have target include + files around. This should be close enough. */ +#define IN_SIGTRAMP(pc, name) ((pc) >= STACK_END_ADDR && (pc < 0xc0000000)) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0x30} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Return 1 if P points to an invalid floating point value. + LEN is the length in bytes -- not relevant on the Tahoe. */ + +#define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 19 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ps", "al", "ah"} + +#define FP_REGNUM 13 /* Contains address of executing stack frame */ +#define SP_REGNUM 14 /* Contains address of top of stack */ +#define PC_REGNUM 15 /* Contains program counter */ +#define PS_REGNUM 16 /* Contains processor status */ + +#define AL_REGNUM 17 /* Contains accumulator */ +#define AH_REGNUM 18 + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ + +#define REGISTER_BYTES (19*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the tahoe, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) 4 + +/* Number of bytes of storage in the program's representation + for register N. On the tahoe, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) 4 + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (1, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). + + FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the Tahoe, the frame's nominal address is the FP value, + and it points to the old FP */ + +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +/* Saved PC */ + +#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame - 8, 4)) + +/* In most of GDB, getting the args address is too important to + just say "I don't know". */ + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +/* Address to use as an anchor for finding local variables */ + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) \ +{ numargs = ((0xffff & read_memory_integer(((fi)->frame-4),4)) - 4) >> 2; } + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ register int regnum; \ + register int rmask = read_memory_integer ((frame_info)->frame-4, 4) >> 16;\ + register CORE_ADDR next_addr; \ + memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ + next_addr = (frame_info)->frame - 8; \ + for (regnum = 12; regnum >= 0; regnum--, rmask <<= 1) \ + (frame_saved_regs).regs[regnum] = (rmask & 0x1000) ? (next_addr -= 4) : 0;\ + (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4; \ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame - 8; \ + (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \ +} + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM); \ + register int regnum; \ +printf("PUSH_DUMMY_FRAME\n"); \ + sp = push_word (sp, read_register (FP_REGNUM)); \ + write_register (FP_REGNUM, sp); \ + sp = push_word (sp, 0x1fff0004); /*SAVE MASK*/ \ + sp = push_word (sp, read_register (PC_REGNUM)); \ + for (regnum = 12; regnum >= 0; regnum--) \ + sp = push_word (sp, read_register (regnum)); \ + write_register (SP_REGNUM, sp); \ +} + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ +{ register CORE_ADDR fp = read_register (FP_REGNUM); \ + register int regnum; \ + register int regmask = read_memory_integer (fp-4, 4); \ +printf("POP_FRAME\n"); \ + regmask >>= 16; \ + write_register (SP_REGNUM, fp+4); \ + write_register (PC_REGNUM, read_memory_integer(fp-8, 4)); \ + write_register (FP_REGNUM, read_memory_integer(fp, 4)); \ + fp -= 8; \ + for (regnum = 12; regnum >= 0; regnum--, regmask <<= 1) \ + if (regmask & 0x1000) \ + write_register (regnum, read_memory_integer (fp-=4, 4)); \ + flush_cached_frames (); \ +} + +/* This sequence of words is the instructions + calls #69, @#32323232 + bpt + Note this is 8 bytes. */ + +#define CALL_DUMMY {0xbf699f32, 0x32323230} + +/* Start execution at beginning of dummy */ + +#define CALL_DUMMY_START_OFFSET 0 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, valtype, using_gcc) \ +{ int temp = (int) fun; \ + *((char *) dummyname + 1) = nargs; \ + memcpy((char *)dummyname+3,&temp,4); } + diff --git a/gdb/config/tahoe/xm-tahoe.h b/gdb/config/tahoe/xm-tahoe.h new file mode 100644 index 0000000..99af344 --- /dev/null +++ b/gdb/config/tahoe/xm-tahoe.h @@ -0,0 +1,136 @@ +/* Definitions to make GDB hosted on a tahoe running 4.3-Reno + Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + Contributed by the State University of New York at Buffalo, by the + Distributed Computer Systems Lab, Department of Computer Science, 1991. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Make sure the system include files define BIG_ENDIAN, UINT_MAX, const, + etc, rather than GDB's files. */ +#include <stdio.h> +#include <sys/param.h> + +/* Host is big-endian */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG)) + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = blockend - 100 + regno * 4; \ + if (regno == PC_REGNUM) addr = blockend - 8; \ + if (regno == PS_REGNUM) addr = blockend - 4; \ + if (regno == FP_REGNUM) addr = blockend - 40; \ + if (regno == SP_REGNUM) addr = blockend - 36; \ + if (regno == AL_REGNUM) addr = blockend - 20; \ + if (regno == AH_REGNUM) addr = blockend - 24;} + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \ + 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0} + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movl $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ + +#define PUSH_FRAME_PTR \ + asm ("pushl fp"); + +/* Copy the top-of-stack to the frame pointer register. */ + +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("pushl 8(sp)"); \ + asm ("pushl 8(sp)"); \ + asm ("pushal 0x41(sp)"); \ + asm ("pushl r0" ); \ + asm ("pushl r1" ); \ + asm ("pushl r2" ); \ + asm ("pushl r3" ); \ + asm ("pushl r4" ); \ + asm ("pushl r5" ); \ + asm ("pushl r6" ); \ + asm ("pushl r7" ); \ + asm ("pushl r8" ); \ + asm ("pushl r9" ); \ + asm ("pushl r10" ); \ + asm ("pushl r11" ); \ + asm ("pushl r12" ); \ + asm ("pushl fp" ); \ + asm ("pushl sp" ); \ + asm ("pushl pc" ); \ + asm ("pushl ps" ); \ + asm ("pushl aclo" ); \ + asm ("pushl achi" ); \ +} + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ \ + asm ("movl (sp)+, achi"); \ + asm ("movl (sp)+, aclo"); \ + asm ("movl (sp)+, ps"); \ + asm ("movl (sp)+, pc"); \ + asm ("movl (sp)+, sp"); \ + asm ("movl (sp)+, fp"); \ + asm ("movl (sp)+, r12"); \ + asm ("movl (sp)+, r11"); \ + asm ("movl (sp)+, r10"); \ + asm ("movl (sp)+, r9"); \ + asm ("movl (sp)+, r8"); \ + asm ("movl (sp)+, r7"); \ + asm ("movl (sp)+, r6"); \ + asm ("movl (sp)+, r5"); \ + asm ("movl (sp)+, r4"); \ + asm ("movl (sp)+, r3"); \ + asm ("movl (sp)+, r2"); \ + asm ("movl (sp)+, r1"); \ + asm ("movl (sp)+, r0"); \ + asm ("subl2 $8,(sp)"); \ + asm ("movl (sp),sp"); \ + asm ("rei"); } diff --git a/gdb/config/tm-lynx.h b/gdb/config/tm-lynx.h new file mode 100644 index 0000000..7107241 --- /dev/null +++ b/gdb/config/tm-lynx.h @@ -0,0 +1,34 @@ +/* Macro definitions for LynxOS targets. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef TM_LYNX_H +#define TM_LYNX_H + +/* Override number of expected traps from sysv. */ +#define START_INFERIOR_TRAPS_EXPECTED 2 + +#include "coff-solib.h" /* COFF shared library support */ + +/* Lynx's signal.h doesn't seem to have any macros for what signal numbers + the real-time events are. */ +#define REALTIME_LO 33 +/* One more than the last one. */ +#define REALTIME_HI 64 + +#endif /* TM_LYNX_H */ diff --git a/gdb/config/tm-nbsd.h b/gdb/config/tm-nbsd.h new file mode 100644 index 0000000..e295d85 --- /dev/null +++ b/gdb/config/tm-nbsd.h @@ -0,0 +1,19 @@ +/* Target machine sub-description for NetBSD. + This is included by other tm-*.h files to specify NetBSD-specific stuff. + Copyright 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ diff --git a/gdb/config/tm-sunos.h b/gdb/config/tm-sunos.h new file mode 100644 index 0000000..26ec3cf --- /dev/null +++ b/gdb/config/tm-sunos.h @@ -0,0 +1,31 @@ +/* Target machine sub-description for SunOS version 4. + This is included by other tm-*.h files to specify SunOS-specific stuff. + Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "solib.h" /* Support for shared libraries. */ + +/* Return non-zero if we are in a shared library trampoline code stub. */ + +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \ + lookup_solib_trampoline_symbol_by_pc (pc) + +/* If PC is in a shared library trampoline code, return the PC + where the function itself actually starts. If not, return 0. */ + +#define SKIP_TRAMPOLINE_CODE(pc) find_solib_trampoline_target (pc) diff --git a/gdb/config/tm-sysv4.h b/gdb/config/tm-sysv4.h new file mode 100644 index 0000000..2c08541 --- /dev/null +++ b/gdb/config/tm-sysv4.h @@ -0,0 +1,45 @@ +/* Macro definitions for GDB on all SVR4 target systems. + Copyright 1991, 1992, 1993, 1994 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* For SVR4 shared libraries, each call to a library routine goes through + a small piece of trampoline code in the ".plt" section. + The horribly ugly wait_for_inferior() routine uses this macro to detect + when we have stepped into one of these fragments. + We do not use lookup_solib_trampoline_symbol_by_pc, because + we cannot always find the shared library trampoline symbols + (e.g. on Irix5). */ + +#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) in_plt_section((pc), (name)) +extern int in_plt_section PARAMS ((CORE_ADDR, char *)); + +/* If PC is in a shared library trampoline code, return the PC + where the function itself actually starts. If not, return 0. */ + +#define SKIP_TRAMPOLINE_CODE(pc) find_solib_trampoline_target (pc) + +/* It is unknown which, if any, SVR4 assemblers do not accept dollar signs + in identifiers. The default in G++ is to use dots instead, for all SVR4 + systems, so we make that our default also. FIXME: There should be some + way to get G++ to tell us what CPLUS_MARKER it is using, perhaps by + stashing it in the debugging information as part of the name of an + invented symbol ("gcc_cplus_marker$" for example). */ + +#undef CPLUS_MARKER +#define CPLUS_MARKER '.' diff --git a/gdb/config/v850/tm-v850.h b/gdb/config/v850/tm-v850.h new file mode 100644 index 0000000..14dd7f0 --- /dev/null +++ b/gdb/config/v850/tm-v850.h @@ -0,0 +1,174 @@ +/* Parameters for execution on an NEC V850 processor. + Copyright 1996 + Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +#define NUM_REGS 66 + +#define REGISTER_NAMES \ +{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \ + \ + "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7", \ + "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15", \ + "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23", \ + "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31", \ + \ + "pc", "fp" } + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +extern char **v850_register_names; +#define REGISTER_NAME(i) v850_register_names[i] + + +#define REGISTER_BYTES (NUM_REGS * 4) + +#define REGISTER_SIZE 4 +#define MAX_REGISTER_RAW_SIZE 4 + +#define R0_REGNUM 0 +#define R1_REGNUM 1 +#define SAVE1_START_REGNUM 2 +#define SAVE1_END_REGNUM 2 +#define SP_REGNUM 3 +#define ARG0_REGNUM 6 +#define ARGLAST_REGNUM 9 +#define V0_REGNUM 10 +#define V1_REGNUM 11 +#define R12_REGNUM 12 +#define SAVE2_START_REGNUM 20 +#define SAVE2_END_REGNUM 29 +#define EP_REGNUM 30 +#define SAVE3_START_REGNUM 31 +#define SAVE3_END_REGNUM 31 +#define RP_REGNUM 31 +#define SR0_REGNUM 32 +#define PS_REGNUM (SR0_REGNUM+5) +#define CTBP_REGNUM (SR0_REGNUM+20) +#define PC_REGNUM 64 +#define FP_REGNUM 65 +#define FP_RAW_REGNUM 29 + +#define TARGET_READ_FP() read_register (FP_RAW_REGNUM) +#define TARGET_WRITE_FP(VAL) write_register (FP_REGNUM, (VAL)) + +#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int + +#define REGISTER_BYTE(REG) ((REG) * 4) +#define REGISTER_VIRTUAL_SIZE(REG) 4 +#define REGISTER_RAW_SIZE(REG) 4 + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +#define BREAKPOINT {0x40, 0xF8} /* little-ended */ + +#define FUNCTION_START_OFFSET 0 + +#define DECR_PC_AFTER_BREAK 0 + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM) + +#ifdef __STDC__ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +#define EXTRA_FRAME_INFO struct frame_saved_regs fsr; + +extern void v850_init_extra_frame_info PARAMS ((struct frame_info *fi)); +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) v850_init_extra_frame_info (fi) +#define INIT_FRAME_PC /* Not necessary */ + +extern void v850_frame_find_saved_regs PARAMS ((struct frame_info *fi, struct frame_saved_regs *regaddr)); +#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr + +extern CORE_ADDR v850_frame_chain PARAMS ((struct frame_info *fi)); +#define FRAME_CHAIN(fi) v850_frame_chain (fi) +#define FRAME_CHAIN_VALID(FP, FI) generic_frame_chain_valid (FP, FI) + +extern CORE_ADDR v850_find_callers_reg PARAMS ((struct frame_info *fi, int regnum)); +extern CORE_ADDR v850_frame_saved_pc PARAMS ((struct frame_info *)); +#define FRAME_SAVED_PC(FI) (v850_frame_saved_pc (FI)) + +#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \ + memcpy (VALBUF, REGBUF + REGISTER_BYTE (V0_REGNUM), TYPE_LENGTH (TYPE)) + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \ + REGISTER_RAW_SIZE (V0_REGNUM)) + +#define STORE_RETURN_VALUE(TYPE, VALBUF) \ + write_register_bytes(REGISTER_BYTE (V0_REGNUM), VALBUF, TYPE_LENGTH (TYPE)); + +extern CORE_ADDR v850_skip_prologue PARAMS ((CORE_ADDR pc)); +#define SKIP_PROLOGUE(pc) pc = v850_skip_prologue (pc) + +#define FRAME_ARGS_SKIP 0 + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) +#define FRAME_NUM_ARGS(val, fi) ((val) = -1) + +extern void v850_pop_frame PARAMS ((struct frame_info *frame)); +#define POP_FRAME v850_pop_frame (get_current_frame ()) + +#define USE_GENERIC_DUMMY_FRAMES +#define CALL_DUMMY {0} +#define CALL_DUMMY_START_OFFSET (0) +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) +#define CALL_DUMMY_LOCATION AT_ENTRY_POINT +#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP) +#define CALL_DUMMY_ADDRESS() entry_point_address () +extern CORE_ADDR v850_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR)); +#define PUSH_RETURN_ADDRESS(PC, SP) v850_push_return_address (PC, SP) + + +#define PUSH_DUMMY_FRAME generic_push_dummy_frame () + +extern CORE_ADDR +v850_push_arguments PARAMS ((int nargs, struct value **args, CORE_ADDR sp, + unsigned char struct_return, + CORE_ADDR struct_addr)); +#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \ + (SP) = v850_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) + +#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) + + +#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP) + +extern use_struct_convention_fn v850_use_struct_convention; +#define USE_STRUCT_CONVENTION(GCC_P, TYPE) v850_use_struct_convention (GCC_P, TYPE); + +/* override the default get_saved_register function with + one that takes account of generic CALL_DUMMY frames */ +#define GET_SAVED_REGISTER + +/* Define this for Wingdb */ + +#define TARGET_V850 diff --git a/gdb/config/v850/v850.mt b/gdb/config/v850/v850.mt new file mode 100644 index 0000000..848bc8d --- /dev/null +++ b/gdb/config/v850/v850.mt @@ -0,0 +1,5 @@ +# Target: NEC V850 processor +TDEPFILES= v850-tdep.o +TM_FILE= tm-v850.h +SIM_OBS = remote-sim.o +SIM = ../sim/v850/libsim.a diff --git a/gdb/config/vax/nm-vax.h b/gdb/config/vax/nm-vax.h new file mode 100644 index 0000000..11f7dc9 --- /dev/null +++ b/gdb/config/vax/nm-vax.h @@ -0,0 +1,28 @@ +/* Common definitions for GDB native support on Vaxen under 4.2bsd and Ultrix. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = blockend - 0110 + regno * 4; \ + if (regno == PC_REGNUM) addr = blockend - 8; \ + if (regno == PS_REGNUM) addr = blockend - 4; \ + if (regno == FP_REGNUM) addr = blockend - 0120; \ + if (regno == AP_REGNUM) addr = blockend - 0124; \ + if (regno == SP_REGNUM) addr = blockend - 20; } + + diff --git a/gdb/config/vax/tm-vax.h b/gdb/config/vax/tm-vax.h new file mode 100644 index 0000000..ad10fb7 --- /dev/null +++ b/gdb/config/vax/tm-vax.h @@ -0,0 +1,330 @@ +/* Definitions to make GDB run on a vax under 4.2bsd. + Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 2 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ +{ register int op = (unsigned char) read_memory_integer (pc, 1); \ + if (op == 0x11) pc += 2; /* skip brb */ \ + if (op == 0x31) pc += 3; /* skip brw */ \ + if (op == 0xC2 && \ + ((unsigned char) read_memory_integer (pc+2, 1)) == 0x5E) \ + pc += 3; /* skip subl2 */ \ + if (op == 0x9E && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xAE && \ + ((unsigned char) read_memory_integer(pc+3, 1)) == 0x5E) \ + pc += 4; /* skip movab */ \ + if (op == 0x9E && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xCE && \ + ((unsigned char) read_memory_integer(pc+4, 1)) == 0x5E) \ + pc += 5; /* skip movab */ \ + if (op == 0x9E && \ + ((unsigned char) read_memory_integer (pc+1, 1)) == 0xEE && \ + ((unsigned char) read_memory_integer(pc+6, 1)) == 0x5E) \ + pc += 7; /* skip movab */ \ +} + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame) + +#define TARGET_UPAGES 14 +#define TARGET_NBPG 512 +#define STACK_END_ADDR (0x80000000 - (TARGET_UPAGES * TARGET_NBPG)) + +/* On the VAX, sigtramp is in the u area. Can't check the exact + addresses because for cross-debugging we don't have VAX include + files around. This should be close enough. */ +#define SIGTRAMP_START(pc) STACK_END_ADDR +#define SIGTRAMP_END(pc) 0x80000000 + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {3} + +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Return 1 if P points to an invalid floating point value. + LEN is the length in bytes -- not relevant on the Vax. */ + +#define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000) + +/* Say how long (ordinary) registers are. This is a piece of bogosity + used in push_word and a few other places; REGISTER_RAW_SIZE is the + real way to know how big a register is. */ + +#define REGISTER_SIZE 4 + +/* Number of machine registers */ + +#define NUM_REGS 17 + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ + +#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "ap", "fp", "sp", "pc", "ps"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define AP_REGNUM 12 +#define FP_REGNUM 13 /* Contains address of executing stack frame */ +#define SP_REGNUM 14 /* Contains address of top of stack */ +#define PC_REGNUM 15 /* Contains program counter */ +#define PS_REGNUM 16 /* Contains processor status */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (17*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the vax, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) 4 + +/* Number of bytes of storage in the program's representation + for register N. On the vax, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) 4 + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (1, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. */ + +/* In the case of the Vax, the frame's nominal address is the FP value, + and 12 bytes later comes the saved previous FP value as a 4-byte word. */ + +#define FRAME_CHAIN(thisframe) \ + (!inside_entry_file ((thisframe)->pc) ? \ + read_memory_integer ((thisframe)->frame + 12, 4) :\ + 0) + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +/* On the vax, all functions have frames. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) {(FRAMELESS) = 0;} + +/* Saved Pc. Get it from sigcontext if within sigtramp. */ + +/* Offset to saved PC in sigcontext, from <sys/signal.h>. */ +#define SIGCONTEXT_PC_OFFSET 12 + +#define FRAME_SAVED_PC(FRAME) \ + (((FRAME)->signal_handler_caller \ + ? sigtramp_saved_pc (FRAME) \ + : read_memory_integer ((FRAME)->frame + 16, 4)) \ + ) + +/* Cannot find the AP register value directly from the FP value. Must + find it saved in the frame called by this one, or in the AP + register for the innermost frame. However, there is no way to tell + the difference between the innermost frame and a frame for which we + just don't know the frame that it called (e.g. "info frame + 0x7ffec789"). For the sake of argument suppose that the stack is + somewhat trashed (which is one reason that "info frame" exists). + So return 0 (indicating we don't know the address of + the arglist) if we don't know what frame this frame calls. */ +#define FRAME_ARGS_ADDRESS_CORRECT(fi) \ + (((fi)->next \ + ? read_memory_integer ((fi)->next->frame + 8, 4) \ + : /* read_register (AP_REGNUM) */ 0)) + +/* In most of GDB, getting the args address is too important to + just say "I don't know". This is sometimes wrong for functions + that aren't on top of the stack, but c'est la vie. */ +#define FRAME_ARGS_ADDRESS(fi) \ + (((fi)->next \ + ? read_memory_integer ((fi)->next->frame + 8, 4) \ + : read_register (AP_REGNUM) /* 0 */)) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Return number of args passed to a frame. + Can return -1, meaning no way to tell. */ + +#define FRAME_NUM_ARGS(numargs, fi) \ +{ numargs = (0xff & read_memory_integer (FRAME_ARGS_ADDRESS (fi), 1)); } + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 4 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ +{ register int regnum; \ + register int regmask = read_memory_integer ((frame_info)->frame+4, 4) >> 16; \ + register CORE_ADDR next_addr; \ + memset (&frame_saved_regs, '\0', sizeof frame_saved_regs); \ + next_addr = (frame_info)->frame + 16; \ + /* Regmask's low bit is for register 0, \ + which is the first one that would be pushed. */ \ + for (regnum = 0; regnum < 12; regnum++, regmask >>= 1) \ + (frame_saved_regs).regs[regnum] = (regmask & 1) ? (next_addr += 4) : 0; \ + (frame_saved_regs).regs[SP_REGNUM] = next_addr + 4; \ + if (read_memory_integer ((frame_info)->frame + 4, 4) & 0x20000000) \ + (frame_saved_regs).regs[SP_REGNUM] += 4 + 4 * read_memory_integer (next_addr + 4, 4); \ + (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 16; \ + (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame + 12; \ + (frame_saved_regs).regs[AP_REGNUM] = (frame_info)->frame + 8; \ + (frame_saved_regs).regs[PS_REGNUM] = (frame_info)->frame + 4; \ +} + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME \ +{ register CORE_ADDR sp = read_register (SP_REGNUM);\ + register int regnum; \ + sp = push_word (sp, 0); /* arglist */ \ + for (regnum = 11; regnum >= 0; regnum--) \ + sp = push_word (sp, read_register (regnum)); \ + sp = push_word (sp, read_register (PC_REGNUM)); \ + sp = push_word (sp, read_register (FP_REGNUM)); \ + sp = push_word (sp, read_register (AP_REGNUM)); \ + sp = push_word (sp, (read_register (PS_REGNUM) & 0xffef) \ + + 0x2fff0000); \ + sp = push_word (sp, 0); \ + write_register (SP_REGNUM, sp); \ + write_register (FP_REGNUM, sp); \ + write_register (AP_REGNUM, sp + 17 * sizeof (int)); } + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME \ +{ register CORE_ADDR fp = read_register (FP_REGNUM); \ + register int regnum; \ + register int regmask = read_memory_integer (fp + 4, 4); \ + write_register (PS_REGNUM, \ + (regmask & 0xffff) \ + | (read_register (PS_REGNUM) & 0xffff0000)); \ + write_register (PC_REGNUM, read_memory_integer (fp + 16, 4)); \ + write_register (FP_REGNUM, read_memory_integer (fp + 12, 4)); \ + write_register (AP_REGNUM, read_memory_integer (fp + 8, 4)); \ + fp += 16; \ + for (regnum = 0; regnum < 12; regnum++) \ + if (regmask & (0x10000 << regnum)) \ + write_register (regnum, read_memory_integer (fp += 4, 4)); \ + fp = fp + 4 + ((regmask >> 30) & 3); \ + if (regmask & 0x20000000) \ + { regnum = read_memory_integer (fp, 4); \ + fp += (regnum + 1) * 4; } \ + write_register (SP_REGNUM, fp); \ + flush_cached_frames (); \ +} + +/* This sequence of words is the instructions + calls #69, @#32323232 + bpt + Note this is 8 bytes. */ + +#define CALL_DUMMY {0x329f69fb, 0x03323232} + +#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */ + +#define CALL_DUMMY_BREAKPOINT_OFFSET 7 + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ *((char *) dummyname + 1) = nargs; \ + *(int *)((char *) dummyname + 3) = fun; } + +/* If vax pcc says CHAR or SHORT, it provides the correct address. */ + +#define BELIEVE_PCC_PROMOTION 1 diff --git a/gdb/config/vax/vax.mt b/gdb/config/vax/vax.mt new file mode 100644 index 0000000..ebdf942 --- /dev/null +++ b/gdb/config/vax/vax.mt @@ -0,0 +1,3 @@ +# Target: DEC VAX running BSD or Ultrix +TDEPFILES= vax-tdep.o +TM_FILE= tm-vax.h diff --git a/gdb/config/vax/vaxbsd.mh b/gdb/config/vax/vaxbsd.mh new file mode 100644 index 0000000..078687d --- /dev/null +++ b/gdb/config/vax/vaxbsd.mh @@ -0,0 +1,13 @@ +# Host: DEC VAX running BSD + +# The following types of /bin/cc failures have been observed: +# 1. Something in readline.c which I have never seen +# 2. ``"values.c", line 816: compiler error: schain botch'' +#msg /bin/cc has been known to fail on VAXen running BSD4.3 +#msg If this occurs, use gcc +#msg (but see comments in Makefile.dist about compiling with gcc). + +XM_FILE= xm-vaxbsd.h +XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o + +NAT_FILE= nm-vax.h diff --git a/gdb/config/vax/vaxult.mh b/gdb/config/vax/vaxult.mh new file mode 100644 index 0000000..4afcbc8 --- /dev/null +++ b/gdb/config/vax/vaxult.mh @@ -0,0 +1,7 @@ +# Host: DEC VAX running Ultrix + +XM_FILE= xm-vaxult.h +XDEPFILES= + +NAT_FILE= nm-vax.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o diff --git a/gdb/config/vax/vaxult2.mh b/gdb/config/vax/vaxult2.mh new file mode 100644 index 0000000..dac73d6 --- /dev/null +++ b/gdb/config/vax/vaxult2.mh @@ -0,0 +1,7 @@ +# Host: DEC VAX running Ultrix + +XM_FILE= xm-vaxult2.h +XDEPFILES= + +NAT_FILE= nm-vax.h +NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o diff --git a/gdb/config/vax/xm-vax.h b/gdb/config/vax/xm-vax.h new file mode 100644 index 0000000..fea11c7 --- /dev/null +++ b/gdb/config/vax/xm-vax.h @@ -0,0 +1,81 @@ +/* Common definitions to make GDB run on Vaxen under 4.2bsd and Ultrix. + Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define HOST_BYTE_ORDER LITTLE_ENDIAN + +/* This is the amount to subtract from u.u_ar0 + to get the offset in the core file of the register values. */ + +#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG)) + +/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */ +#define ONE_PROCESS_WRITETEXT + +/* Interface definitions for kernel debugger KDB. */ + +/* Map machine fault codes into signal numbers. + First subtract 0, divide by 4, then index in a table. + Faults for which the entry in this table is 0 + are not handled by KDB; the program's own trap handler + gets to handle then. */ + +#define FAULT_CODE_ORIGIN 0 +#define FAULT_CODE_UNITS 4 +#define FAULT_TABLE \ +{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \ + 0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0} + +/* Start running with a stack stretching from BEG to END. + BEG and END should be symbols meaningful to the assembler. + This is used only for kdb. */ + +#define INIT_STACK(beg, end) \ +{ asm (".globl end"); \ + asm ("movl $ end, sp"); \ + asm ("clrl fp"); } + +/* Push the frame pointer register on the stack. */ +#define PUSH_FRAME_PTR \ + asm ("pushl fp"); + +/* Copy the top-of-stack to the frame pointer register. */ +#define POP_FRAME_PTR \ + asm ("movl (sp), fp"); + +/* After KDB is entered by a fault, push all registers + that GDB thinks about (all NUM_REGS of them), + so that they appear in order of ascending GDB register number. + The fault code will be on the stack beyond the last register. */ + +#define PUSH_REGISTERS \ +{ asm ("pushl 8(sp)"); \ + asm ("pushl 8(sp)"); \ + asm ("pushal 0x14(sp)"); \ + asm ("pushr $037777"); } + +/* Assuming the registers (including processor status) have been + pushed on the stack in order of ascending GDB register number, + restore them and return to the address in the saved PC register. */ + +#define POP_REGISTERS \ +{ asm ("popr $037777"); \ + asm ("subl2 $8,(sp)"); \ + asm ("movl (sp),sp"); \ + asm ("rei"); } diff --git a/gdb/config/vax/xm-vaxbsd.h b/gdb/config/vax/xm-vaxbsd.h new file mode 100644 index 0000000..b42bd70 --- /dev/null +++ b/gdb/config/vax/xm-vaxbsd.h @@ -0,0 +1,10 @@ +/* Definitions to make GDB run on a vax under BSD, 4.3 or 4.4. */ + +/* We have to include these files now, so that GDB will not make + competing definitions in defs.h. */ +#include <machine/endian.h> +/* This should exist on either 4.3 or 4.4. 4.3 doesn't have limits.h + or machine/limits.h. */ +#include <sys/param.h> + +#include "vax/xm-vax.h" diff --git a/gdb/config/vax/xm-vaxult.h b/gdb/config/vax/xm-vaxult.h new file mode 100644 index 0000000..24c6437 --- /dev/null +++ b/gdb/config/vax/xm-vaxult.h @@ -0,0 +1,12 @@ +/* Definitions to make GDB run on a vax under Ultrix. */ + +#include "vax/xm-vax.h" +extern char *strdup(); + +/* This is required for Ultrix 3.1b, not for later versions. Ultrix + 3.1b can't just use xm-vaxult2.h because Ultrix 3.1b does define + FD_SET. Sure, we could have separate configurations for vaxult2, + vaxult3, and vaxult, but why bother? Defining the ptrace constants + in infptrace.c isn't going to do any harm; it's not like they are + going to change. */ +#define NO_PTRACE_H diff --git a/gdb/config/vax/xm-vaxult2.h b/gdb/config/vax/xm-vaxult2.h new file mode 100644 index 0000000..d0d3d62 --- /dev/null +++ b/gdb/config/vax/xm-vaxult2.h @@ -0,0 +1,11 @@ +/* Definitions to make GDB run on a vax under Ultrix. */ + +#include "vax/xm-vax.h" +extern char *strdup(); + +#define NO_PTRACE_H + +/* Old versions of ultrix have fd_set but not the FD_* macros. */ + +#define FD_SET(bit,fdsetp) ((fdsetp)->fds_bits[(n) / 32] |= (1 << ((n) % 32))) +#define FD_ZERO(fdsetp) memset (fdsetp, 0, sizeof (*fdsetp)) diff --git a/gdb/config/w65/tm-w65.h b/gdb/config/w65/tm-w65.h new file mode 100644 index 0000000..2e354bb --- /dev/null +++ b/gdb/config/w65/tm-w65.h @@ -0,0 +1,213 @@ +/* Parameters for execution on a WDC 65816 machine. + Copyright (C) 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* Contributed by Steve Chamberlain sac@cygnus.com */ + +#define GDB_TARGET_IS_W65 + +#define IEEE_FLOAT 1 + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER LITTLE_ENDIAN + + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR w65_skip_prologue (); + +#define SKIP_PROLOGUE(ip) \ + {(ip) = w65_skip_prologue(ip);} + + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. + + The return address is the value saved in the PR register + 4 */ + +#define SAVED_PC_AFTER_CALL(frame) \ + saved_pc_after_call(frame) + + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Illegal instruction - used by the simulator for breakpoint + detection */ + +#define BREAKPOINT {0xcb} /* WAI */ + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ +#define DECR_PC_AFTER_BREAK 0 + +/* Return 1 if P points to an invalid floating point value. */ + +#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */ + +/* Say how long registers are. */ +/*#define REGISTER_TYPE int*/ + +/* Say how much memory is needed to store a copy of the register set */ +#define REGISTER_BYTES (NUM_REGS*4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) (((N) < 16) ? 2 : 4) + +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long) + +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +#define REGISTER_NAMES \ + {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7", \ + "r8","r9","r10","r11","r12","r13","r14","r15", \ + "pc","a", "x", "y", "dbr","d", "s", "p", \ + "ticks","cycles","insts"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define SP_REGNUM 22 +#define FP_REGNUM 15 +#define NUM_REGS 27 +#define PC_REGNUM 16 +#define P_REGNUM 23 + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + We store structs through a pointer passed in R4 */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (4, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE)) + + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + Things always get returned in R4/R5 */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE)) + + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#define FRAME_CHAIN(FRAME) w65_frame_chain(FRAME) +#define FRAME_SAVED_PC(FRAME) (w65_frame_saved_pc(FRAME)) +#define FRAME_ARGS_ADDRESS(fi) (fi)->frame +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +#define NAMES_HAVE_UNDERSCORE + +typedef unsigned short INSN_WORD; + +extern CORE_ADDR w65_addr_bits_remove PARAMS ((CORE_ADDR)); +#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr) + +#define CALL_DUMMY_LENGTH 10 + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +#define POP_FRAME pop_frame(); + + +#define NOP {0xea} + +#define REGISTER_SIZE 4 + +#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno) + +#define TARGET_INT_BIT 16 +#define TARGET_LONG_BIT 32 +#define TARGET_PTR_BIT 32 diff --git a/gdb/config/w65/w65.mt b/gdb/config/w65/w65.mt new file mode 100644 index 0000000..06d2325 --- /dev/null +++ b/gdb/config/w65/w65.mt @@ -0,0 +1,8 @@ +# Target: WDC 65816 with simulator +TDEPFILES= w65-tdep.o +TM_FILE= tm-w65.h + +SIM_OBS = remote-sim.o +SIM = ../sim/w65/libsim.a + + diff --git a/gdb/config/xm-aix4.h b/gdb/config/xm-aix4.h new file mode 100644 index 0000000..87062f7 --- /dev/null +++ b/gdb/config/xm-aix4.h @@ -0,0 +1,99 @@ +/* Parameters for hosting on an PowerPC, for GDB, the GNU debugger. + Copyright 1995, 1998 Free Software Foundation, Inc. + Contributed by Cygnus Corporation. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* The following text is taken from config/rs6000.mh: + * # The IBM version of /usr/include/rpc/rpc.h has a bug -- it says + * # `extern fd_set svc_fdset;' without ever defining the type fd_set. + * # Unfortunately this occurs in the vx-share code, which is not configured + * # like the rest of GDB (e.g. it doesn't include "defs.h"). + * # We circumvent this bug by #define-ing fd_set here, but undefining it in + * # the xm-rs6000.h file before ordinary modules try to use it. FIXME, IBM! + * MH_CFLAGS='-Dfd_set=int' + * So, here we do the undefine...which has to occur before we include + * <sys/select.h> below. + */ +#undef fd_set + +#include <sys/select.h> + +/* Big end is at the low address */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +/* At least as of AIX 3.2, we have termios. */ +#define HAVE_TERMIOS 1 +/* #define HAVE_TERMIO 1 */ + +#define USG 1 +#define HAVE_SIGSETMASK 1 + +#define FIVE_ARG_PTRACE + +/* AIX declares the mem functions differently than defs.h does. AIX is + right, but defs.h works on more old systems. For now, override it. */ + +#define MEM_FNS_DECLARED 1 + +/* This system requires that we open a terminal with O_NOCTTY for it to + not become our controlling terminal. */ + +#define USE_O_NOCTTY + +/* Brain death inherited from PC's pervades. */ +#undef NULL +#define NULL 0 + +/* The IBM compiler requires this in order to properly compile alloca(). */ +#pragma alloca + +/* There is no vfork. */ + +#define vfork fork + +char *termdef(); + +/* Signal handler for SIGWINCH `window size changed'. */ + +#define SIGWINCH_HANDLER aix_resizewindow +extern void aix_resizewindow PARAMS ((int)); + +/* `lines_per_page' and `chars_per_line' are local to utils.c. Rectify this. */ + +#define SIGWINCH_HANDLER_BODY \ + \ +/* Respond to SIGWINCH `window size changed' signal, and reset GDB's \ + window settings appropriately. */ \ + \ +void \ +aix_resizewindow (signo) \ + int signo; \ +{ \ + int fd = fileno (stdout); \ + if (isatty (fd)) { \ + int val; \ + \ + val = atoi (termdef (fd, 'l')); \ + if (val > 0) \ + lines_per_page = val; \ + val = atoi (termdef (fd, 'c')); \ + if (val > 0) \ + chars_per_line = val; \ + } \ +} diff --git a/gdb/config/xm-lynx.h b/gdb/config/xm-lynx.h new file mode 100644 index 0000000..d73e2c1 --- /dev/null +++ b/gdb/config/xm-lynx.h @@ -0,0 +1,20 @@ +/* Host-dependent definitions for any CPU running LynxOS. + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include <limits.h> /* for INT_MIN */ diff --git a/gdb/config/xm-mpw.h b/gdb/config/xm-mpw.h new file mode 100644 index 0000000..0c473d7 --- /dev/null +++ b/gdb/config/xm-mpw.h @@ -0,0 +1,81 @@ +/* Macro definitions for running GDB on Apple Macintoshes. + Copyright (C) 1994, 1995 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "mpw.h" + +#include "fopen-bin.h" + +#include "spin.h" + +#define CANT_FORK + +/* Map these standard functions to versions that can do I/O in a console + window. */ + +#define printf hacked_printf +#define fprintf hacked_fprintf +#define vprintf hacked_vfprintf +#define fputs hacked_fputs +#define fputc hacked_fputc +#undef putc +#define putc hacked_putc +#define fflush hacked_fflush + +#define fgetc hacked_fgetc + +#define POSIX_UTIME + +/* No declaration of strdup in MPW's string.h, oddly enough. */ + +char *strdup (char *s1); + +/* '.' indicates drivers on the Mac, so we need a different filename. */ + +#define GDBINIT_FILENAME "_gdbinit" + +/* Commas are more common to separate dirnames in a path on Macs. */ + +#define DIRNAME_SEPARATOR ',' + +/* This is a real crufty hack. */ + +#define HAVE_TERMIO + +/* Addons to the basic MPW-supported signal list. */ + +#ifndef SIGQUIT +#define SIGQUIT (1<<6) +#endif +#ifndef SIGHUP +#define SIGHUP (1<<7) +#endif + +/* If __STDC__ is on, then this definition will be missing. */ + +#ifndef fileno +#define fileno(p) (p)->_file +#endif + +#ifndef R_OK +#define R_OK 4 +#endif + +extern int StandAlone; + +extern int mac_app; diff --git a/gdb/config/xm-nbsd.h b/gdb/config/xm-nbsd.h new file mode 100644 index 0000000..2332bb5 --- /dev/null +++ b/gdb/config/xm-nbsd.h @@ -0,0 +1,32 @@ +/* Host-dependent definitions for any CPU running NetBSD. + Copyright 1993, 1994, 1996 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* We have to include these files now, so that GDB will not make + competing definitions in defs.h. */ +#include <limits.h> + +#include <machine/endian.h> +#if BYTE_ORDER == BIG_ENDIAN +#define HOST_BYTE_ORDER BIG_ENDIAN +#else +#define HOST_BYTE_ORDER LITTLE_ENDIAN +#endif + +/* NetBSD has termios facilities. */ +#define HAVE_TERMIOS diff --git a/gdb/config/xm-sysv4.h b/gdb/config/xm-sysv4.h new file mode 100644 index 0000000..06215e6 --- /dev/null +++ b/gdb/config/xm-sysv4.h @@ -0,0 +1,39 @@ +/* Definitions for running gdb on a host machine running any flavor of SVR4. + Copyright 1991, 1992 Free Software Foundation, Inc. + Written by Fred Fish at Cygnus Support (fnf@cygnus.com). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* SVR4 has termios facilities. */ + +#undef HAVE_TERMIO +#define HAVE_TERMIOS + +/* SVR4 is a derivative of System V Release 3 (USG) */ + +#define USG + +/* Use setpgid(0,0) to run inferior in a separate process group */ + +#define NEED_POSIX_SETPGID + +/* SVR4 has sigsetjmp and siglongjmp */ +#define HAVE_SIGSETJMP + +/* We have to include these files now, so that GDB will not make + competing definitions in defs.h. */ +#include <limits.h> diff --git a/gdb/config/z8k/tm-z8k.h b/gdb/config/z8k/tm-z8k.h new file mode 100644 index 0000000..babde90 --- /dev/null +++ b/gdb/config/z8k/tm-z8k.h @@ -0,0 +1,287 @@ +/* Parameters for execution on a z8000 series machine. + Copyright 1992, 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#define IEEE_FLOAT 1 + +#undef TARGET_INT_BIT +#undef TARGET_LONG_BIT +#undef TARGET_SHORT_BIT +#undef TARGET_PTR_BIT + +#define TARGET_SHORT_BIT 16 +#define TARGET_INT_BIT 16 +#define TARGET_LONG_BIT 32 +#define TARGET_PTR_BIT (BIG ? 32: 16) + +/* Define the bit, byte, and word ordering of the machine. */ +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(ip) {(ip) = z8k_skip_prologue(ip);} +extern CORE_ADDR mz8k_skip_prologue PARAMS ((CORE_ADDR ip)); + + +/* Immediately after a function call, return the saved pc. + Can't always go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call(frame) + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* Sequence of bytes for breakpoint instruction. */ + +#define BREAKPOINT {0x36,0x00} + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Say how long registers are. */ + +#define REGISTER_TYPE unsigned int + +#define NUM_REGS 23 /* 16 registers + 1 ccr + 1 pc + 3 debug + regs + fake fp + fake sp*/ +#define REGISTER_BYTES (NUM_REGS *4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. On the z8k, all but the pc are 2 bytes, but we + keep them all as 4 bytes and trim them on I/O */ + + +#define REGISTER_RAW_SIZE(N) (((N) < 16)? 2:4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 4 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 4 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + (REGISTER_VIRTUAL_SIZE(N) == 2? builtin_type_unsigned_int : builtin_type_long) + +/*#define INIT_FRAME_PC(x,y) init_frame_pc(x,y)*/ +/* Initializer for an array of names of registers. + Entries beyond the first NUM_REGS are ignored. */ + +#define REGISTER_NAMES \ + {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ + "ccr", "pc", "cycles","insts","time","fp","sp"} + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define CCR_REGNUM 16 /* Contains processor status */ +#define PC_REGNUM 17 /* Contains program counter */ +#define CYCLES_REGNUM 18 +#define INSTS_REGNUM 19 +#define TIME_REGNUM 20 +#define FP_REGNUM 21 /* Contains fp, whatever memory model */ +#define SP_REGNUM 22 /* Conatins sp, whatever memory model */ + + + +#define PTR_SIZE (BIG ? 4: 2) +#define PTR_MASK (BIG ? 0xff00ffff : 0x0000ffff) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) abort(); + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. This is assuming that floating point values are returned + as doubles in d0/d1. */ + + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + memcpy(VALBUF, REGBUF + REGISTER_BYTE(2), TYPE_LENGTH(TYPE)); + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) abort(); + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ + +/* FRAME_CHAIN takes a frame's nominal address and produces the frame's + chain-pointer. + In the case of the Z8000, the frame's nominal address + is the address of a ptr sized byte word containing the calling + frame's address. */ + +#define FRAME_CHAIN(thisframe) frame_chain(thisframe); + + + +/* Define other aspects of the stack frame. */ + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ +#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ + (FRAMELESS) = frameless_look_for_prologue(FI) + +#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME) + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are + now that the C compiler delays popping them. */ +#if !defined (FRAME_NUM_ARGS) +#define FRAME_NUM_ARGS(val,fi) (val = -1) +#endif + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +#ifdef __STDC__ +struct frame_info; +#endif +extern void z8k_frame_init_saved_regs PARAMS ((struct frame_info *)); +#define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi) + + +/* Things needed for making the inferior call functions. + It seems like every m68k based machine has almost identical definitions + in the individual machine's configuration files. Most other cpu types + (mips, i386, etc) have routines in their *-tdep.c files to handle this + for most configurations. The m68k family should be able to do this as + well. These macros can still be overridden when necessary. */ + +/* The CALL_DUMMY macro is the sequence of instructions, as disassembled + by gdb itself: + + fmovemx fp0-fp7,sp@- 0xf227 0xe0ff + moveml d0-a5,sp@- 0x48e7 0xfffc + clrw sp@- 0x4267 + movew ccr,sp@- 0x42e7 + + /..* The arguments are pushed at this point by GDB; + no code is needed in the dummy for this. + The CALL_DUMMY_START_OFFSET gives the position of + the following jsr instruction. *../ + + jsr @#0x32323232 0x4eb9 0x3232 0x3232 + addal #0x69696969,sp 0xdffc 0x6969 0x6969 + trap #<your BPT_VECTOR number here> 0x4e4? + nop 0x4e71 + + Note this is CALL_DUMMY_LENGTH bytes (28 for the above example). + We actually start executing at the jsr, since the pushing of the + registers is done by PUSH_DUMMY_FRAME. If this were real code, + the arguments for the function called by the jsr would be pushed + between the moveml and the jsr, and we could allow it to execute through. + But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is + done, and we cannot allow the moveml to push the registers again lest + they be taken for the arguments. */ + + +#define CALL_DUMMY { 0 } +#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */ +#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/ + + +/* Insert the specified number of args and function address + into a call sequence of the above form stored at DUMMYNAME. + We use the BFD routines to store a big-endian value of known size. */ + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +{ bfd_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \ + bfd_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); } + +/* Push an empty stack frame, to record the current PC, etc. */ + +#define PUSH_DUMMY_FRAME { z8k_push_dummy_frame (); } + +extern void z8k_push_dummy_frame PARAMS ((void)); + +extern void z8k_pop_frame PARAMS ((void)); + +/* Discard from the stack the innermost frame, restoring all registers. */ + +#define POP_FRAME { z8k_pop_frame (); } + +/* Offset from SP to first arg on stack at first instruction of a function */ + +#define SP_ARG0 (1 * 4) + +extern CORE_ADDR z8k_addr_bits_remove PARAMS ((CORE_ADDR)); +#define ADDR_BITS_REMOVE(addr) z8k_addr_bits_remove (addr) +int sim_z8001_mode; +#define BIG (sim_z8001_mode) + +#define read_memory_short(x) (read_memory_integer(x,2) & 0xffff) + +#define NO_STD_REGS + +#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno) + + +#define INIT_EXTRA_SYMTAB_INFO \ + z8k_set_pointer_size(objfile->obfd->arch_info->bits_per_address); + +#define REGISTER_SIZE 4 + diff --git a/gdb/config/z8k/z8k.mt b/gdb/config/z8k/z8k.mt new file mode 100644 index 0000000..cb8d043 --- /dev/null +++ b/gdb/config/z8k/z8k.mt @@ -0,0 +1,7 @@ +# Target: Z8000 with simulator +TDEPFILES= z8k-tdep.o +TM_FILE= tm-z8k.h + +SIM_OBS = remote-sim.o +SIM = ../sim/z8k/libsim.a + |