20 files changed, 68 insertions, 180 deletions
diff --git a/gdb/config/a29k/tm-a29k.h b/gdb/config/a29k/tm-a29k.h
index f999134..66f54bf 100644
--- a/gdb/config/a29k/tm-a29k.h
+++ b/gdb/config/a29k/tm-a29k.h
@@ -84,12 +84,6 @@ CORE_ADDR skip_prologue ();
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.
-   On the a29k, this is a "jmpi l0" instruction.  */
-
-#define ABOUT_TO_RETURN(pc) \
-  ((read_memory_integer (pc, 4) & 0xff0000ff) == 0xc0000080)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/alpha/tm-alpha.h b/gdb/config/alpha/tm-alpha.h
index 7cb21a4..8aaefb4 100644
--- a/gdb/config/alpha/tm-alpha.h
+++ b/gdb/config/alpha/tm-alpha.h
@@ -25,6 +25,13 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 #include "coff/sym.h"		/* Needed for PDR below.  */
 #include "coff/symconst.h"
 
+#ifdef __STDC__
+struct frame_info;
+struct type;
+struct value;
+struct symbol;
+#endif
+
 #if !defined (TARGET_BYTE_ORDER)
 #define TARGET_BYTE_ORDER LITTLE_ENDIAN
 #endif
@@ -61,9 +68,6 @@ extern CORE_ADDR alpha_skip_prologue PARAMS ((CORE_ADDR addr, int lenient));
    some instructions.  */
 
 #define SAVED_PC_AFTER_CALL(frame)	alpha_saved_pc_after_call(frame)
-#ifdef __STDC__
-struct frame_info;
-#endif
 extern CORE_ADDR
 alpha_saved_pc_after_call PARAMS ((struct frame_info *));
 
@@ -85,11 +89,6 @@ alpha_saved_pc_after_call PARAMS ((struct frame_info *));
 #define DECR_PC_AFTER_BREAK 4
 #endif
 
-/* Nonzero if instruction at PC is a return instruction.
-   "ret $zero,($ra),1" on alpha. */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 4) == 0x6bfa8001)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
@@ -184,9 +183,6 @@ alpha_saved_pc_after_call PARAMS ((struct frame_info *));
 
 #define REGISTER_CONVERT_TO_VIRTUAL(REGNUM, TYPE, FROM, TO) \
   alpha_register_convert_to_virtual (REGNUM, TYPE, FROM, TO)
-#ifdef __STDC__
-struct type;
-#endif
 extern void
 alpha_register_convert_to_virtual PARAMS ((int, struct type *, char *, char *));
 
@@ -316,10 +312,7 @@ extern void alpha_find_saved_regs PARAMS ((struct frame_info *));
 /* Things needed for making the inferior call functions.  */
 
 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
-    sp = alpha_push_arguments(nargs, args, sp, struct_return, struct_addr)
-#ifdef __STDC__
-struct value;
-#endif
+    sp = alpha_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
 extern CORE_ADDR
 alpha_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
 
@@ -384,6 +377,7 @@ extern CORE_ADDR alpha_call_dummy_address PARAMS ((void));
    alpha_extra_func_info_t's off of this.  */
 
 #define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
 
 /* Specific information about a procedure.
    This overlays the ALPHA's PDR records, 
diff --git a/gdb/config/arc/tm-arc.h b/gdb/config/arc/tm-arc.h
index e4b693b..aebdc58 100644
--- a/gdb/config/arc/tm-arc.h
+++ b/gdb/config/arc/tm-arc.h
@@ -83,13 +83,6 @@ extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR, int));
 
 #define INNER_THAN <
 
-/* Nonzero if instruction at pc is a return instruction.
-   This is the "j [blink]" insn (with or without conditionals or delay
-   slots).  */
-
-#define ABOUT_TO_RETURN(pc) \
-  ((read_memory_integer(pc, 4) & 0xffffff80) == 0x380f8000)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/arm/tm-arm.h b/gdb/config/arm/tm-arm.h
index 202a815..907773f 100644
--- a/gdb/config/arm/tm-arm.h
+++ b/gdb/config/arm/tm-arm.h
@@ -79,23 +79,11 @@ extern CORE_ADDR arm_saved_pc_after_call PARAMS ((struct frame_info *));
 
 #define INNER_THAN <
 
-/* Sequence of bytes for breakpoint instruction.  */
-
 /* !!!! if we're using RDP, then we're inserting breakpoints and storing
    their handles instread of what was in memory.  It is nice that
    this is the same size as a handle - otherwise remote-rdp will
    have to change. */
 
-#define ARM_LE_BREAKPOINT {0x00,0x00,0x18,0xef} /* BKPT_SWI from <sys/ptrace.h> */
-#define ARM_BE_BREAKPOINT {0xef,0x18,0x00,0x00} /* BKPT_SWI from <sys/ptrace.h> */
-#define THUMB_LE_BREAKPOINT {0x18,0xdf}       /* swi 24 */
-#define THUMB_BE_BREAKPOINT {0xdf,0x18}       /* swi 24 */
-
-/* The following has been superseded by BREAKPOINT_FOR_PC, but
-   is defined merely to keep mem-break.c happy.  */
-#define LITTLE_BREAKPOINT ARM_LE_BREAKPOINT
-#define BIG_BREAKPOINT    ARM_BE_BREAKPOINT
-
 /* BREAKPOINT_FROM_PC uses the program counter value to determine whether a
    16- or 32-bit breakpoint should be used.  It returns a pointer
    to a string of bytes that encode a breakpoint instruction, stores
@@ -103,7 +91,7 @@ extern CORE_ADDR arm_saved_pc_after_call PARAMS ((struct frame_info *));
    point to the actual memory location where the breakpoint should be
    inserted.  */
 
-unsigned char * arm_breakpoint_from_pc PARAMS ((CORE_ADDR * pcptr, int * lenptr));
+extern breakpoint_from_pc_fn arm_breakpoint_from_pc;
 #define BREAKPOINT_FROM_PC(pcptr, lenptr) arm_breakpoint_from_pc (pcptr, lenptr)
 
 /* Amount PC must be decremented by after a breakpoint.
@@ -112,12 +100,6 @@ unsigned char * arm_breakpoint_from_pc PARAMS ((CORE_ADDR * pcptr, int * lenptr)
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) \
-      ((read_memory_integer(pc, 4) & 0x0fffffff == 0x01b0f00e) || \
-       (read_memory_integer(pc, 4) & 0x0ffff800 == 0x09eba800))
-
 /* code to execute to print interesting information about the
  * floating point processor (if any)
  * No need to define if there is nothing to do.
diff --git a/gdb/config/h8300/tm-h8300.h b/gdb/config/h8300/tm-h8300.h
index 13dd045..dac5acb 100644
--- a/gdb/config/h8300/tm-h8300.h
+++ b/gdb/config/h8300/tm-h8300.h
@@ -92,12 +92,6 @@ extern CORE_ADDR h8300_skip_prologue ();
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* Allow any of the return instructions, including a trapv and a return
-   from interupt.  */
-
-#define ABOUT_TO_RETURN(pc) ((read_memory_unsigned_integer (pc, 2) & ~0x3) == 0x4e74)
-
 /* Say how long registers are.  */
 
 #define REGISTER_SIZE 4
diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h
index 6e76e65..51b2d4c 100644
--- a/gdb/config/h8500/tm-h8500.h
+++ b/gdb/config/h8500/tm-h8500.h
@@ -68,12 +68,6 @@ extern CORE_ADDR saved_pc_after_call PARAMS ((void));
 
 #define DECR_PC_AFTER_BREAK 0
 
-#if 0 /* never used */
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) about_to_return(pc)
-#endif
-
 /* Say how long registers are.  */
 
 #define REGISTER_TYPE  unsigned long
diff --git a/gdb/config/i386/tm-i386.h b/gdb/config/i386/tm-i386.h
index 0bf3109..7e92ac1 100644
--- a/gdb/config/i386/tm-i386.h
+++ b/gdb/config/i386/tm-i386.h
@@ -70,10 +70,6 @@ extern int i386_skip_prologue PARAMS ((int));
 
 #define DECR_PC_AFTER_BREAK 1
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer ((pc), 1) == 0xc3)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/i960/tm-i960.h b/gdb/config/i960/tm-i960.h
index 11ae4a4..c80f7f3 100644
--- a/gdb/config/i960/tm-i960.h
+++ b/gdb/config/i960/tm-i960.h
@@ -64,10 +64,6 @@ extern CORE_ADDR saved_pc_after_call ();
 
 #define INNER_THAN >
 
-/* Nonzero if instruction at ip is a return instruction.  */
-
-#define ABOUT_TO_RETURN(ip) (read_memory_integer(ip,4) == 0x0a000000)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/m68k/tm-m68k.h b/gdb/config/m68k/tm-m68k.h
index 1e7e8e2..74d4eea 100644
--- a/gdb/config/m68k/tm-m68k.h
+++ b/gdb/config/m68k/tm-m68k.h
@@ -91,12 +91,6 @@ extern void m68k_find_saved_regs PARAMS ((struct frame_info *, struct frame_save
 #define DECR_PC_AFTER_BREAK 2
 #endif
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* Allow any of the return instructions, including a trapv and a return
-   from interupt.  */
-
-#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/m88k/tm-m88k.h b/gdb/config/m88k/tm-m88k.h
index 3c0acd9..b6776dc 100644
--- a/gdb/config/m88k/tm-m88k.h
+++ b/gdb/config/m88k/tm-m88k.h
@@ -91,11 +91,6 @@ extern CORE_ADDR skip_prologue ();
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* 'jmp r1' or 'jmp.n r1' is used to return from a subroutine. */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 2) == 0xF800)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/mips/tm-mips.h b/gdb/config/mips/tm-mips.h
index 922d218..5ca8fa4 100644
--- a/gdb/config/mips/tm-mips.h
+++ b/gdb/config/mips/tm-mips.h
@@ -139,11 +139,6 @@ extern breakpoint_from_pc_fn mips_breakpoint_from_pc;
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction. "j ra" on mips. */
-
-int mips_about_to_return PARAMS ((CORE_ADDR pc));
-#define ABOUT_TO_RETURN(pc) mips_about_to_return (pc)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/ns32k/tm-merlin.h b/gdb/config/ns32k/tm-merlin.h
index f951c28..4c9cedf 100644
--- a/gdb/config/ns32k/tm-merlin.h
+++ b/gdb/config/ns32k/tm-merlin.h
@@ -62,10 +62,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0x12)
-
 /* Define this to say that the "svc" insn is followed by
    codes in memory saying which kind of system call it is.  */
 
diff --git a/gdb/config/ns32k/tm-umax.h b/gdb/config/ns32k/tm-umax.h
index e7860a9..fdb3cfe 100644
--- a/gdb/config/ns32k/tm-umax.h
+++ b/gdb/config/ns32k/tm-umax.h
@@ -70,10 +70,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0x12)
-
 #if 0 /* Disable until fixed *correctly*.  */
 #ifndef INVALID_FLOAT
 #ifndef NaN
diff --git a/gdb/config/pa/tm-hppa.h b/gdb/config/pa/tm-hppa.h
index 1e88722..5c4566e 100644
--- a/gdb/config/pa/tm-hppa.h
+++ b/gdb/config/pa/tm-hppa.h
@@ -63,7 +63,8 @@ struct inferior_status;
 #define REG_STRUCT_HAS_ADDR(gcc_p,type) \
   (TYPE_LENGTH (type) > 8)
 
-#define USE_STRUCT_CONVENTION(gcc_p,type) (TYPE_LENGTH (type) > 8)
+extern use_struct_convention_fn hppa_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type)
 
 /* Offset from address of function to start of its code.
    Zero on most machines.  */
@@ -116,10 +117,6 @@ extern CORE_ADDR saved_pc_after_call PARAMS ((struct frame_info *));
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* return instruction is bv r0(rp) or bv,n r0(rp)*/
-
-#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 4) | 0x2) == 0xE840C002)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
@@ -361,7 +358,8 @@ extern int frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
   (FRAMELESS) = frameless_function_invocation(FI)
 extern int frameless_function_invocation PARAMS ((struct frame_info *));
 
-#define FRAME_SAVED_PC(FRAME) frame_saved_pc (FRAME)
+extern CORE_ADDR hppa_frame_saved_pc PARAMS ((struct frame_info *frame));
+#define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME)
 
 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
 
@@ -535,8 +533,14 @@ extern CORE_ADDR
 hppa_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, int,
 			     struct value **, struct type *, int));
 
+/* Stack must be aligned on 32-bit boundaries when synthesizing
+   function calls.  We still need STACK_ALIGN, PUSH_ARGUMENTS does
+   not do all the work. */
+
+#define STACK_ALIGN(ADDR) (((ADDR) + 7) & -8)
+
 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
-    sp = hppa_push_arguments(nargs, args, sp, struct_return, struct_addr)
+    sp = hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
 extern CORE_ADDR
 hppa_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int,
 			     CORE_ADDR));
@@ -666,5 +670,3 @@ extern int hpread_adjust_stack_address PARAMS ((CORE_ADDR));
    probably much more common.  (FIXME). */
 
 #define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c)
-
-#define STACK_ALIGN(ADDR) (((ADDR) + 7) & -8)
diff --git a/gdb/config/rs6000/tm-rs6000.h b/gdb/config/rs6000/tm-rs6000.h
index 9891b7f..7ae9329 100644
--- a/gdb/config/rs6000/tm-rs6000.h
+++ b/gdb/config/rs6000/tm-rs6000.h
@@ -1,5 +1,5 @@
 /* Parameters for target execution on an RS6000, for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1997
    Free Software Foundation, Inc.
    Contributed by IBM Corporation.
 
@@ -151,34 +151,20 @@ extern void aix_process_linenos PARAMS ((void));
 
 #define INNER_THAN <
 
-#if 0
-/* No, we shouldn't use this. push_arguments() should leave stack in a
-   proper alignment! */
-/* Stack has strict alignment. */
-
-#define STACK_ALIGN(ADDR)	(((ADDR)+7)&-8)
-#endif
-
-/* This is how argumets pushed onto stack or passed in registers. */
+/* This is how arguments pushed onto stack or passed in registers.
+   Stack must be aligned on 64-bit boundaries when synthesizing
+   function calls.  We don't need STACK_ALIGN, PUSH_ARGUMENTS will
+   handle it. */
 
 #define	PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
-  sp = push_arguments(nargs, args, sp, struct_return, struct_addr)
+  sp = push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
 extern CORE_ADDR push_arguments PARAMS ((int, struct value **, CORE_ADDR,
 					 int, CORE_ADDR));
 
-/* Sequence of bytes for breakpoint instruction.  */
-
-#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
-#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
-
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
-#define BREAKPOINT BIG_BREAKPOINT
-
-#else
-#if TARGET_BYTE_ORDER == LITTLE_ENDIAN
-#define BREAKPOINT LITTLE_BREAKPOINT
-#endif
-#endif
+/* BREAKPOINT_FROM_PC uses the program counter value to determine the
+   breakpoint that should be used */
+extern breakpoint_from_pc_fn rs6000_breakpoint_from_pc;
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) rs6000_breakpoint_from_pc (pcptr, lenptr)
 
 /* Amount PC must be decremented by after a breakpoint.
    This is often the number of bytes in BREAKPOINT
@@ -186,13 +172,6 @@ extern CORE_ADDR push_arguments PARAMS ((int, struct value **, CORE_ADDR,
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* Allow any of the return instructions, including a trapv and a return
-   from interrupt.  */
-
-#define ABOUT_TO_RETURN(pc)  \
-   ((read_memory_integer (pc, 4) & 0xfe8007ff) == 0x4e800020)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
@@ -441,6 +420,7 @@ extern int frameless_function_invocation PARAMS((struct frame_info *));
    frame.
    The following constants were determined by experimentation on AIX 3.2.  */
 #define SIG_FRAME_PC_OFFSET 96
+#define SIG_FRAME_LR_OFFSET 108
 #define SIG_FRAME_FP_OFFSET 284
 
 /* Default offset from SP where the LR is stored */
@@ -601,26 +581,42 @@ extern void pop_frame PARAMS ((void));
 
 #define CALL_DUMMY_START_OFFSET 16
 
-/* Insert the specified number of args and function address
-   into a call sequence of the above form stored at DUMMYNAME.  */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, using_gcc) \
-	fix_call_dummy(dummyname, pc, fun, nargs, (int)type)
-extern void fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, int, int));
-
-/* Usually a function pointer's representation is simply the address of
-   the function. On the RS/6000 however, a function pointer is represented
-   by a pointer to a TOC entry. This TOC entry contains three words,
-   the first word is the address of the function, the second word is the
-   TOC pointer (r2), and the third word is the static chain value.
-   Throughout GDB it is currently assumed that a function pointer contains
-   the address of the function, which is not easy to fix.
-   In addition, the conversion of a function address to a function
-   pointer would require allocation of a TOC entry in the inferior's
-   memory space, with all its drawbacks.
-   To be able to call C++ virtual methods in the inferior (which are called
-   via function pointers), find_function_addr uses this macro to
-   get the function address from a function pointer.  */
+/* Insert the specified number of args and function address into a
+   call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+  rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+extern void rs6000_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR,
+					   int, struct value **,
+					   struct type *, int));
+
+/* Hook in rs6000-tdep.c for determining the TOC address when
+   calling functions in the inferior.  */
+extern CORE_ADDR (*find_toc_address_hook) PARAMS ((CORE_ADDR));
+
+/* xcoffread.c provides a function to determine the TOC offset
+   for a given object file.
+   It is used under native AIX configurations for determining the
+   TOC address when calling functions in the inferior.  */
+#ifdef __STDC__
+struct objfile;
+#endif
+extern CORE_ADDR get_toc_offset PARAMS ((struct objfile *));
+
+/* Usually a function pointer's representation is simply the address
+   of the function. On the RS/6000 however, a function pointer is
+   represented by a pointer to a TOC entry. This TOC entry contains
+   three words, the first word is the address of the function, the
+   second word is the TOC pointer (r2), and the third word is the
+   static chain value.  Throughout GDB it is currently assumed that a
+   function pointer contains the address of the function, which is not
+   easy to fix.  In addition, the conversion of a function address to
+   a function pointer would require allocation of a TOC entry in the
+   inferior's memory space, with all its drawbacks.  To be able to
+   call C++ virtual methods in the inferior (which are called via
+   function pointers), find_function_addr uses this macro to get the
+   function address from a function pointer.  */
+
 #define CONVERT_FROM_FUNC_PTR_ADDR(ADDR) \
   (is_magic_function_pointer (ADDR) ? read_memory_integer (ADDR, 4) : (ADDR))
 extern int is_magic_function_pointer PARAMS ((CORE_ADDR));
diff --git a/gdb/config/sh/tm-sh.h b/gdb/config/sh/tm-sh.h
index 82108f3..cc39ed3 100644
--- a/gdb/config/sh/tm-sh.h
+++ b/gdb/config/sh/tm-sh.h
@@ -74,9 +74,6 @@ extern CORE_ADDR sh_skip_prologue ();
    define this before including this file.  */
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-#define ABOUT_TO_RETURN(pc) (read_memory_integer(pc,2) == 0x000b)
-
 /* Say how long registers are.  */
 #define REGISTER_TYPE  long
 
diff --git a/gdb/config/sparc/tm-sparc.h b/gdb/config/sparc/tm-sparc.h
index 273a218..fc978f7 100644
--- a/gdb/config/sparc/tm-sparc.h
+++ b/gdb/config/sparc/tm-sparc.h
@@ -127,14 +127,6 @@ extern CORE_ADDR sparc_pc_adjust PARAMS ((CORE_ADDR));
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* For SPARC, this is either a "jmpl %o7+8,%g0" or "jmpl %i7+8,%g0".
-
-   Note: this does not work for functions returning structures under SunOS.
-   v9 does not have such critters though.  */
-#define ABOUT_TO_RETURN(pc) \
-  ((read_memory_integer (pc, 4)|0x00040000) == 0x81c7e008)
-
 /* Say how long (ordinary) registers are.  This is a piece of bogosity
    used in push_word and a few other places; REGISTER_RAW_SIZE is the
    real way to know how big a register is.  */
diff --git a/gdb/config/vax/tm-vax.h b/gdb/config/vax/tm-vax.h
index 7e9774d..c36f527 100644
--- a/gdb/config/vax/tm-vax.h
+++ b/gdb/config/vax/tm-vax.h
@@ -80,10 +80,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 04)
-
 /* Return 1 if P points to an invalid floating point value.
    LEN is the length in bytes -- not relevant on the Vax.  */
 
diff --git a/gdb/config/w65/tm-w65.h b/gdb/config/w65/tm-w65.h
index d63007a..458bfab 100644
--- a/gdb/config/w65/tm-w65.h
+++ b/gdb/config/w65/tm-w65.h
@@ -66,14 +66,6 @@ extern CORE_ADDR w65_skip_prologue ();
    define this before including this file.  */
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-
-#define ABOUT_TO_RETURN(pc) \
-  (read_memory_integer(pc,1) == RTL || read_memory_integer(pc,1) == RTS)
-
-#define RTL 0x6b
-#define RTS 0x60
-
 /* Return 1 if P points to an invalid floating point value.  */
 
 #define INVALID_FLOAT(p, len) 0   /* Just a first guess; not checked */
diff --git a/gdb/config/z8k/tm-z8k.h b/gdb/config/z8k/tm-z8k.h
index 0970737..3ef38ca 100644
--- a/gdb/config/z8k/tm-z8k.h
+++ b/gdb/config/z8k/tm-z8k.h
@@ -64,12 +64,6 @@ extern CORE_ADDR mz8k_skip_prologue PARAMS ((CORE_ADDR ip));
 
 #define DECR_PC_AFTER_BREAK 0
 
-/* Nonzero if instruction at PC is a return instruction.  */
-/* Allow any of the return instructions, including a trapv and a return
-   from interupt.  */
-
-#define ABOUT_TO_RETURN(pc) about_to_return(pc)
-
 /* Say how long registers are.  */
 
 #define REGISTER_TYPE unsigned int