diff options
Diffstat (limited to 'gdb/config/sparc')
-rw-r--r-- | gdb/config/sparc/sparclet.mt | 3 | ||||
-rw-r--r-- | gdb/config/sparc/sparclite.mt | 5 | ||||
-rw-r--r-- | gdb/config/sparc/tm-sparclet.h | 158 | ||||
-rw-r--r-- | gdb/config/sparc/tm-sparclite.h | 123 |
4 files changed, 0 insertions, 289 deletions
diff --git a/gdb/config/sparc/sparclet.mt b/gdb/config/sparc/sparclet.mt deleted file mode 100644 index 5dde41b..0000000 --- a/gdb/config/sparc/sparclet.mt +++ /dev/null @@ -1,3 +0,0 @@ -# OBSOLETE # Target: SPARC embedded Sparclet monitor -# OBSOLETE TDEPFILES= sparc-tdep.o monitor.o sparclet-rom.o dsrec.o -# OBSOLETE TM_FILE= tm-sparclet.h diff --git a/gdb/config/sparc/sparclite.mt b/gdb/config/sparc/sparclite.mt deleted file mode 100644 index 7ae1008..0000000 --- a/gdb/config/sparc/sparclite.mt +++ /dev/null @@ -1,5 +0,0 @@ -# OBSOLETE # Target: Fujitsu SPARClite processor -# OBSOLETE TDEPFILES= sparc-tdep.o sparcl-tdep.o -# OBSOLETE TM_FILE= tm-sparclite.h -# OBSOLETE SIM_OBS = remote-sim.o -# OBSOLETE SIM = ../sim/erc32/libsim.a diff --git a/gdb/config/sparc/tm-sparclet.h b/gdb/config/sparc/tm-sparclet.h deleted file mode 100644 index 95bdeea..0000000 --- a/gdb/config/sparc/tm-sparclet.h +++ /dev/null @@ -1,158 +0,0 @@ -// OBSOLETE /* Target machine definitions for GDB for an embedded SPARC. -// OBSOLETE Copyright 1996, 1997, 2000 Free Software Foundation, Inc. -// OBSOLETE -// OBSOLETE This file is part of GDB. -// OBSOLETE -// OBSOLETE This program is free software; you can redistribute it and/or modify -// OBSOLETE it under the terms of the GNU General Public License as published by -// OBSOLETE the Free Software Foundation; either version 2 of the License, or -// OBSOLETE (at your option) any later version. -// OBSOLETE -// OBSOLETE This program is distributed in the hope that it will be useful, -// OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of -// OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// OBSOLETE GNU General Public License for more details. -// OBSOLETE -// OBSOLETE You should have received a copy of the GNU General Public License -// OBSOLETE along with this program; if not, write to the Free Software -// OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, -// OBSOLETE Boston, MA 02111-1307, USA. */ -// OBSOLETE -// OBSOLETE #include "regcache.h" -// OBSOLETE -// OBSOLETE #define TARGET_SPARCLET 1 /* Still needed for non-multi-arch case */ -// OBSOLETE -// OBSOLETE #include "sparc/tm-sparc.h" -// OBSOLETE -// OBSOLETE /* Note: we are not defining GDB_MULTI_ARCH for the sparclet target -// OBSOLETE at this time, because we have not figured out how to detect the -// OBSOLETE sparclet target from the bfd structure. */ -// OBSOLETE -// OBSOLETE /* Sparclet regs, for debugging purposes. */ -// OBSOLETE -// OBSOLETE enum { -// OBSOLETE CCSR_REGNUM = 72, -// OBSOLETE CCPR_REGNUM = 73, -// OBSOLETE CCCRCR_REGNUM = 74, -// OBSOLETE CCOR_REGNUM = 75, -// OBSOLETE CCOBR_REGNUM = 76, -// OBSOLETE CCIBR_REGNUM = 77, -// OBSOLETE CCIR_REGNUM = 78 -// OBSOLETE }; -// OBSOLETE -// OBSOLETE /* Select the sparclet disassembler. Slightly different instruction set from -// OBSOLETE the V8 sparc. */ -// OBSOLETE -// OBSOLETE #undef TM_PRINT_INSN_MACH -// OBSOLETE #define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclet -// OBSOLETE -// OBSOLETE /* overrides of tm-sparc.h */ -// OBSOLETE -// OBSOLETE #undef TARGET_BYTE_ORDER -// OBSOLETE -// OBSOLETE /* Sequence of bytes for breakpoint instruction (ta 1). */ -// OBSOLETE #undef BREAKPOINT -// OBSOLETE #define BIG_BREAKPOINT {0x91, 0xd0, 0x20, 0x01} -// OBSOLETE #define LITTLE_BREAKPOINT {0x01, 0x20, 0xd0, 0x91} -// OBSOLETE -// OBSOLETE #if !defined (GDB_MULTI_ARCH) || (GDB_MULTI_ARCH == 0) -// OBSOLETE /* -// OBSOLETE * The following defines must go away for MULTI_ARCH. -// OBSOLETE */ -// OBSOLETE -// OBSOLETE #undef NUM_REGS /* formerly "72" */ -// OBSOLETE /* WIN FP CPU CCP ASR AWR APSR */ -// OBSOLETE #define NUM_REGS (32 + 32 + 8 + 8 + 8/*+ 32 + 1*/) -// OBSOLETE -// OBSOLETE #undef REGISTER_BYTES /* formerly "(32*4 + 32*4 + 8*4)" */ -// OBSOLETE #define REGISTER_BYTES (32*4 + 32*4 + 8*4 + 8*4 + 8*4/* + 32*4 + 1*4*/) -// OBSOLETE -// OBSOLETE /* Initializer for an array of names of registers. -// OBSOLETE There should be NUM_REGS strings in this initializer. */ -// OBSOLETE /* Sparclet has no fp! */ -// OBSOLETE /* Compiler maps types for floats by number, so can't -// OBSOLETE change the numbers here. */ -// OBSOLETE -// OBSOLETE #undef REGISTER_NAMES -// OBSOLETE #define REGISTER_NAMES \ -// OBSOLETE { "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ -// OBSOLETE "o0", "o1", "o2", "o3", "o4", "o5", "o6", "o7", \ -// OBSOLETE "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ -// OBSOLETE "i0", "i1", "i2", "i3", "i4", "i5", "i6", "i7", \ -// OBSOLETE \ -// OBSOLETE "", "", "", "", "", "", "", "", /* no FPU regs */ \ -// OBSOLETE "", "", "", "", "", "", "", "", \ -// OBSOLETE "", "", "", "", "", "", "", "", \ -// OBSOLETE "", "", "", "", "", "", "", "", \ -// OBSOLETE /* no CPSR, FPSR */ \ -// OBSOLETE "y", "psr", "wim", "tbr", "pc", "npc", "", "", \ -// OBSOLETE \ -// OBSOLETE "ccsr", "ccpr", "cccrcr", "ccor", "ccobr", "ccibr", "ccir", "", \ -// OBSOLETE \ -// OBSOLETE /* ASR15 ASR19 (don't display them) */ \ -// OBSOLETE "asr1", "", "asr17", "asr18", "", "asr20", "asr21", "asr22", \ -// OBSOLETE /* \ -// OBSOLETE "awr0", "awr1", "awr2", "awr3", "awr4", "awr5", "awr6", "awr7", \ -// OBSOLETE "awr8", "awr9", "awr10", "awr11", "awr12", "awr13", "awr14", "awr15", \ -// OBSOLETE "awr16", "awr17", "awr18", "awr19", "awr20", "awr21", "awr22", "awr23", \ -// OBSOLETE "awr24", "awr25", "awr26", "awr27", "awr28", "awr29", "awr30", "awr31", \ -// OBSOLETE "apsr", \ -// OBSOLETE */ \ -// OBSOLETE } -// OBSOLETE -// OBSOLETE /* Remove FP dependant code which was defined in tm-sparc.h */ -// OBSOLETE #undef FP0_REGNUM /* Floating point register 0 */ -// OBSOLETE #undef FPS_REGNUM /* Floating point status register */ -// OBSOLETE #undef CPS_REGNUM /* Coprocessor status register */ -// OBSOLETE -// OBSOLETE /* sparclet register numbers */ -// OBSOLETE #define CCSR_REGNUM 72 -// OBSOLETE -// OBSOLETE #undef DEPRECATED_EXTRACT_RETURN_VALUE -// OBSOLETE #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ -// OBSOLETE { \ -// OBSOLETE memcpy ((VALBUF), \ -// OBSOLETE (char *)(REGBUF) + REGISTER_RAW_SIZE (O0_REGNUM) * 8 + \ -// OBSOLETE (TYPE_LENGTH(TYPE) >= REGISTER_RAW_SIZE (O0_REGNUM) \ -// OBSOLETE ? 0 : REGISTER_RAW_SIZE (O0_REGNUM) - TYPE_LENGTH(TYPE)), \ -// OBSOLETE TYPE_LENGTH(TYPE)); \ -// OBSOLETE } -// OBSOLETE #undef DEPRECATED_STORE_RETURN_VALUE -// OBSOLETE #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) \ -// OBSOLETE { \ -// OBSOLETE /* Other values are returned in register %o0. */ \ -// OBSOLETE deprecated_write_register_bytes (REGISTER_BYTE (O0_REGNUM), (VALBUF), \ -// OBSOLETE TYPE_LENGTH (TYPE)); \ -// OBSOLETE } -// OBSOLETE -// OBSOLETE #endif /* GDB_MULTI_ARCH */ -// OBSOLETE -// OBSOLETE extern void sparclet_do_registers_info (int regnum, int all); -// OBSOLETE #undef DEPRECATED_DO_REGISTERS_INFO -// OBSOLETE #define DEPRECATED_DO_REGISTERS_INFO(REGNUM,ALL) sparclet_do_registers_info (REGNUM, ALL) -// OBSOLETE -// OBSOLETE -// OBSOLETE /* Offsets into jmp_buf. Not defined by Sun, but at least documented in a -// OBSOLETE comment in <machine/setjmp.h>! */ -// OBSOLETE -// OBSOLETE #define JB_ELEMENT_SIZE 4 /* Size of each element in jmp_buf */ -// OBSOLETE -// OBSOLETE #define JB_ONSSTACK 0 -// OBSOLETE #define JB_SIGMASK 1 -// OBSOLETE #define JB_SP 2 -// OBSOLETE #define JB_PC 3 -// OBSOLETE #define JB_NPC 4 -// OBSOLETE #define JB_PSR 5 -// OBSOLETE #define JB_G1 6 -// OBSOLETE #define JB_O0 7 -// OBSOLETE #define JB_WBCNT 8 -// OBSOLETE -// OBSOLETE /* Figure out where the longjmp will land. We expect that we have just entered -// OBSOLETE longjmp and haven't yet setup the stack frame, so the args are still in the -// OBSOLETE output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we -// OBSOLETE extract the pc (JB_PC) that we will land at. The pc is copied into ADDR. -// OBSOLETE This routine returns true on success */ -// OBSOLETE -// OBSOLETE extern int get_longjmp_target (CORE_ADDR *); -// OBSOLETE -// OBSOLETE #define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) diff --git a/gdb/config/sparc/tm-sparclite.h b/gdb/config/sparc/tm-sparclite.h deleted file mode 100644 index bd8996b..0000000 --- a/gdb/config/sparc/tm-sparclite.h +++ /dev/null @@ -1,123 +0,0 @@ -// OBSOLETE /* Macro definitions for GDB for a Fujitsu SPARClite. -// OBSOLETE Copyright 1993, 1994, 1995, 1998, 1999, 2000, 2001, 2002, 2003 -// OBSOLETE Free Software Foundation, Inc. -// OBSOLETE -// OBSOLETE This file is part of GDB. -// OBSOLETE -// OBSOLETE This program is free software; you can redistribute it and/or modify -// OBSOLETE it under the terms of the GNU General Public License as published by -// OBSOLETE the Free Software Foundation; either version 2 of the License, or -// OBSOLETE (at your option) any later version. -// OBSOLETE -// OBSOLETE This program is distributed in the hope that it will be useful, -// OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of -// OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// OBSOLETE GNU General Public License for more details. -// OBSOLETE -// OBSOLETE You should have received a copy of the GNU General Public License -// OBSOLETE along with this program; if not, write to the Free Software -// OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, -// OBSOLETE Boston, MA 02111-1307, USA. */ -// OBSOLETE -// OBSOLETE #include "regcache.h" -// OBSOLETE -// OBSOLETE #define TARGET_SPARCLITE 1 /* Still needed for non-multi-arch case */ -// OBSOLETE -// OBSOLETE #include "sparc/tm-sparc.h" -// OBSOLETE -// OBSOLETE /* Note: we are not defining GDB_MULTI_ARCH for the sparclet target -// OBSOLETE at this time, because we have not figured out how to detect the -// OBSOLETE sparclet target from the bfd structure. */ -// OBSOLETE -// OBSOLETE /* Sparclite regs, for debugging purposes */ -// OBSOLETE -// OBSOLETE enum { -// OBSOLETE DIA1_REGNUM = 72, /* debug instr address register 1 */ -// OBSOLETE DIA2_REGNUM = 73, /* debug instr address register 2 */ -// OBSOLETE DDA1_REGNUM = 74, /* debug data address register 1 */ -// OBSOLETE DDA2_REGNUM = 75, /* debug data address register 2 */ -// OBSOLETE DDV1_REGNUM = 76, /* debug data value register 1 */ -// OBSOLETE DDV2_REGNUM = 77, /* debug data value register 2 */ -// OBSOLETE DCR_REGNUM = 78, /* debug control register */ -// OBSOLETE DSR_REGNUM = 79 /* debug status regsiter */ -// OBSOLETE }; -// OBSOLETE -// OBSOLETE /* overrides of tm-sparc.h */ -// OBSOLETE -// OBSOLETE #undef TARGET_BYTE_ORDER -// OBSOLETE -// OBSOLETE /* Select the sparclite disassembler. Slightly different instruction set from -// OBSOLETE the V8 sparc. */ -// OBSOLETE -// OBSOLETE #undef TM_PRINT_INSN_MACH -// OBSOLETE #define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclite -// OBSOLETE -// OBSOLETE /* Amount PC must be decremented by after a hardware instruction breakpoint. -// OBSOLETE This is often the number of bytes in BREAKPOINT -// OBSOLETE but not always. */ -// OBSOLETE -// OBSOLETE #define DECR_PC_AFTER_HW_BREAK 4 -// OBSOLETE -// OBSOLETE #if !defined (GDB_MULTI_ARCH) || (GDB_MULTI_ARCH == 0) -// OBSOLETE /* -// OBSOLETE * The following defines must go away for MULTI_ARCH. -// OBSOLETE */ -// OBSOLETE -// OBSOLETE #undef NUM_REGS -// OBSOLETE #define NUM_REGS 80 -// OBSOLETE -// OBSOLETE #undef REGISTER_BYTES -// OBSOLETE #define REGISTER_BYTES (32*4+32*4+8*4+8*4) -// OBSOLETE -// OBSOLETE #undef REGISTER_NAMES -// OBSOLETE #define REGISTER_NAMES \ -// OBSOLETE { "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ -// OBSOLETE "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \ -// OBSOLETE "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ -// OBSOLETE "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \ -// OBSOLETE \ -// OBSOLETE "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ -// OBSOLETE "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ -// OBSOLETE "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \ -// OBSOLETE "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \ -// OBSOLETE \ -// OBSOLETE "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr", \ -// OBSOLETE "dia1", "dia2", "dda1", "dda2", "ddv1", "ddv2", "dcr", "dsr" } -// OBSOLETE -// OBSOLETE #define DIA1_REGNUM 72 /* debug instr address register 1 */ -// OBSOLETE #define DIA2_REGNUM 73 /* debug instr address register 2 */ -// OBSOLETE #define DDA1_REGNUM 74 /* debug data address register 1 */ -// OBSOLETE #define DDA2_REGNUM 75 /* debug data address register 2 */ -// OBSOLETE #define DDV1_REGNUM 76 /* debug data value register 1 */ -// OBSOLETE #define DDV2_REGNUM 77 /* debug data value register 2 */ -// OBSOLETE #define DCR_REGNUM 78 /* debug control register */ -// OBSOLETE #define DSR_REGNUM 79 /* debug status regsiter */ -// OBSOLETE -// OBSOLETE #endif /* GDB_MULTI_ARCH */ -// OBSOLETE -// OBSOLETE #define TARGET_HW_BREAK_LIMIT 2 -// OBSOLETE #define TARGET_HW_WATCH_LIMIT 2 -// OBSOLETE -// OBSOLETE /* Enable watchpoint macro's */ -// OBSOLETE -// OBSOLETE #define TARGET_HAS_HARDWARE_WATCHPOINTS -// OBSOLETE -// OBSOLETE #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ -// OBSOLETE sparclite_check_watch_resources (type, cnt, ot) -// OBSOLETE -// OBSOLETE /* When a hardware watchpoint fires off the PC will be left at the -// OBSOLETE instruction which caused the watchpoint. It will be necessary for -// OBSOLETE GDB to step over the watchpoint. *** -// OBSOLETE -// OBSOLETE #define STOPPED_BY_WATCHPOINT(W) \ -// OBSOLETE ((W).kind == TARGET_WAITKIND_STOPPED \ -// OBSOLETE && (W).value.sig == TARGET_SIGNAL_TRAP \ -// OBSOLETE && ((int) read_register (IPSW_REGNUM) & 0x00100000)) -// OBSOLETE */ -// OBSOLETE -// OBSOLETE /* Use these macros for watchpoint insertion/deletion. */ -// OBSOLETE #define target_insert_watchpoint(addr, len, type) sparclite_insert_watchpoint (addr, len, type) -// OBSOLETE #define target_remove_watchpoint(addr, len, type) sparclite_remove_watchpoint (addr, len, type) -// OBSOLETE #define target_insert_hw_breakpoint(addr, len) sparclite_insert_hw_breakpoint (addr, len) -// OBSOLETE #define target_remove_hw_breakpoint(addr, len) sparclite_remove_hw_breakpoint (addr, len) -// OBSOLETE #define target_stopped_data_address() sparclite_stopped_data_address() |