diff options
Diffstat (limited to 'gdb/cli/cli-cmds.c')
| -rw-r--r-- | gdb/cli/cli-cmds.c | 90 |
1 files changed, 45 insertions, 45 deletions
diff --git a/gdb/cli/cli-cmds.c b/gdb/cli/cli-cmds.c index 4fa6a5f..43978e9 100644 --- a/gdb/cli/cli-cmds.c +++ b/gdb/cli/cli-cmds.c @@ -1081,32 +1081,32 @@ The commands below can be used to select other frames by number or address."), /* Define general commands. */ - add_com ("pwd", class_files, pwd_command, - "Print working directory. This is used for your program as well."); + add_com ("pwd", class_files, pwd_command, _("\ +Print working directory. This is used for your program as well.")); c = add_cmd ("cd", class_files, cd_command, _("\ Set working directory to DIR for debugger and program being debugged.\n\ The change does not take effect for the program being debugged\n\ until the next time it is started."), &cmdlist); set_cmd_completer (c, filename_completer); - add_com ("echo", class_support, echo_command, - "Print a constant string. Give string as argument.\n\ + add_com ("echo", class_support, echo_command, _("\ +Print a constant string. Give string as argument.\n\ C escape sequences may be used in the argument.\n\ No newline is added at the end of the argument;\n\ use \"\\n\" if you want a newline to be printed.\n\ Since leading and trailing whitespace are ignored in command arguments,\n\ if you want to print some you must use \"\\\" before leading whitespace\n\ -to be printed or after trailing whitespace."); - add_com ("document", class_support, document_command, - "Document a user-defined command.\n\ +to be printed or after trailing whitespace.")); + add_com ("document", class_support, document_command, _("\ +Document a user-defined command.\n\ Give command name as argument. Give documentation on following lines.\n\ -End with a line of just \"end\"."); - add_com ("define", class_support, define_command, - "Define a new command name. Command name is argument.\n\ +End with a line of just \"end\".")); + add_com ("define", class_support, define_command, _("\ +Define a new command name. Command name is argument.\n\ Definition appears on following lines, one command per line.\n\ End with a line of just \"end\".\n\ Use the \"document\" command to give documentation for the new command.\n\ -Commands defined in this way may have up to ten arguments."); +Commands defined in this way may have up to ten arguments.")); c = add_cmd ("source", class_support, source_command, _("\ Read commands from a file named FILE.\n\ @@ -1114,8 +1114,9 @@ Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\ when gdb is started."), &cmdlist); set_cmd_completer (c, filename_completer); - add_com ("quit", class_support, quit_command, "Exit gdb."); - c = add_com ("help", class_support, help_command, "Print list of commands."); + add_com ("quit", class_support, quit_command, _("Exit gdb.")); + c = add_com ("help", class_support, help_command, + _("Print list of commands.")); set_cmd_completer (c, command_completer); add_com_alias ("q", "quit", class_support, 1); add_com_alias ("h", "help", class_support, 1); @@ -1128,10 +1129,10 @@ when gdb is started."), &cmdlist); set_verbose (NULL, 0, c); add_prefix_cmd ("history", class_support, set_history, - "Generic command for setting command history parameters.", + _("Generic command for setting command history parameters."), &sethistlist, "set history ", 0, &setlist); add_prefix_cmd ("history", class_support, show_history, - "Generic command for showing command history parameters.", + _("Generic command for showing command history parameters."), &showhistlist, "show history ", 0, &showlist); deprecated_add_show_from_set @@ -1140,19 +1141,19 @@ when gdb is started."), &cmdlist); Without an argument, history expansion is enabled.", &sethistlist), &showhistlist); - add_prefix_cmd ("info", class_info, info_command, - "Generic command for showing things about the program being debugged.", + add_prefix_cmd ("info", class_info, info_command, _("\ +Generic command for showing things about the program being debugged."), &infolist, "info ", 0, &cmdlist); add_com_alias ("i", "info", class_info, 1); add_com ("complete", class_obscure, complete_command, - "List the completions for the rest of the line as a command."); + _("List the completions for the rest of the line as a command.")); add_prefix_cmd ("show", class_info, show_command, - "Generic command for showing things about the debugger.", + _("Generic command for showing things about the debugger."), &showlist, "show ", 0, &cmdlist); /* Another way to get at the same thing. */ - add_info ("set", show_command, "Show all GDB settings."); + add_info ("set", show_command, _("Show all GDB settings.")); add_cmd ("commands", no_class, show_commands, _("\ Show the history of commands you typed.\n\ @@ -1163,18 +1164,18 @@ the previous command number shown."), add_cmd ("version", no_class, show_version, _("Show what version of GDB this is."), &showlist); - add_com ("while", class_support, while_command, - "Execute nested commands WHILE the conditional expression is non zero.\n\ + add_com ("while", class_support, while_command, _("\ +Execute nested commands WHILE the conditional expression is non zero.\n\ The conditional expression must follow the word `while' and must in turn be\n\ followed by a new line. The nested commands must be entered one per line,\n\ -and should be terminated by the word `end'."); +and should be terminated by the word `end'.")); - add_com ("if", class_support, if_command, - "Execute nested commands once IF the conditional expression is non zero.\n\ + add_com ("if", class_support, if_command, _("\ +Execute nested commands once IF the conditional expression is non zero.\n\ The conditional expression must follow the word `if' and must in turn be\n\ followed by a new line. The nested commands must be entered one per line,\n\ and should be terminated by the word 'else' or `end'. If an else clause\n\ -is used, the same rules apply to its nested commands as to the first ones."); +is used, the same rules apply to its nested commands as to the first ones.")); /* If target is open when baud changes, it doesn't take effect until the next open (I think, not sure). */ @@ -1202,45 +1203,43 @@ from the target.", &setlist), &showlist); add_prefix_cmd ("debug", no_class, set_debug, - "Generic command for setting gdb debugging flags", + _("Generic command for setting gdb debugging flags"), &setdebuglist, "set debug ", 0, &setlist); add_prefix_cmd ("debug", no_class, show_debug, - "Generic command for showing gdb debugging flags", + _("Generic command for showing gdb debugging flags"), &showdebuglist, "show debug ", 0, &showlist); - c = add_com ("shell", class_support, shell_escape, - "Execute the rest of the line as a shell command.\n\ -With no arguments, run an inferior shell."); + c = add_com ("shell", class_support, shell_escape, _("\ +Execute the rest of the line as a shell command.\n\ +With no arguments, run an inferior shell.")); set_cmd_completer (c, filename_completer); - c = add_com ("edit", class_files, edit_command, - concat ("Edit specified file or function.\n\ + c = add_com ("edit", class_files, edit_command, _("\ +Edit specified file or function.\n\ With no argument, edits file containing most recent line listed.\n\ -", "\ Editing targets can be specified in these ways:\n\ FILE:LINENUM, to edit at that line in that file,\n\ FUNCTION, to edit at the beginning of that function,\n\ FILE:FUNCTION, to distinguish among like-named static functions.\n\ *ADDRESS, to edit at the line containing that address.\n\ -Uses EDITOR environment variable contents as editor (or ex as default).",NULL)); +Uses EDITOR environment variable contents as editor (or ex as default).")); c->completer = location_completer; - add_com ("list", class_files, list_command, - concat ("List specified function or line.\n\ + add_com ("list", class_files, list_command, _("\ +List specified function or line.\n\ With no argument, lists ten more lines after or around previous listing.\n\ \"list -\" lists the ten lines before a previous ten-line listing.\n\ One argument specifies a line, and ten lines are listed around that line.\n\ Two arguments with comma between specify starting and ending lines to list.\n\ -", "\ Lines can be specified in these ways:\n\ LINENUM, to list around that line in current file,\n\ FILE:LINENUM, to list around that line in that file,\n\ FUNCTION, to list around beginning of that function,\n\ FILE:FUNCTION, to distinguish among like-named static functions.\n\ *ADDRESS, to list around the line containing that address.\n\ -With two args if one is empty it stands for ten lines away from the other arg.", NULL)); +With two args if one is empty it stands for ten lines away from the other arg.")); if (!xdb_commands) add_com_alias ("l", "list", class_files, 1); @@ -1250,11 +1249,11 @@ With two args if one is empty it stands for ten lines away from the other arg.", if (dbx_commands) add_com_alias ("file", "list", class_files, 1); - c = add_com ("disassemble", class_vars, disassemble_command, - "Disassemble a specified section of memory.\n\ + c = add_com ("disassemble", class_vars, disassemble_command, _("\ +Disassemble a specified section of memory.\n\ Default is the function surrounding the pc of the selected frame.\n\ With a single argument, the function surrounding that address is dumped.\n\ -Two arguments are taken as a range of memory to dump."); +Two arguments are taken as a range of memory to dump.")); set_cmd_completer (c, location_completer); if (xdb_commands) add_com_alias ("va", "disassemble", class_xdb, 0); @@ -1268,14 +1267,15 @@ Two arguments are taken as a range of memory to dump."); if (xdb_commands) add_com_alias ("!", "shell", class_support, 0); - c = add_com ("make", class_support, make_command, - "Run the ``make'' program using the rest of the line as arguments."); + c = add_com ("make", class_support, make_command, _("\ +Run the ``make'' program using the rest of the line as arguments.")); set_cmd_completer (c, filename_completer); add_cmd ("user", no_class, show_user, _("\ Show definitions of user defined commands.\n\ Argument is the name of the user defined command.\n\ With no argument, show definitions of all user defined commands."), &showlist); - add_com ("apropos", class_support, apropos_command, "Search for commands matching a REGEXP"); + add_com ("apropos", class_support, apropos_command, + _("Search for commands matching a REGEXP")); deprecated_add_show_from_set (add_set_cmd ("max-user-call-depth", no_class, var_integer, |