diff options
Diffstat (limited to 'gdb/RCS/m68k-pinsn.c,v')
| -rw-r--r-- | gdb/RCS/m68k-pinsn.c,v | 824 |
1 files changed, 0 insertions, 824 deletions
diff --git a/gdb/RCS/m68k-pinsn.c,v b/gdb/RCS/m68k-pinsn.c,v deleted file mode 100644 index d8c7f84..0000000 --- a/gdb/RCS/m68k-pinsn.c,v +++ /dev/null @@ -1,824 +0,0 @@ -head 1.2; -access ; -symbols ; -locks ; strict; -comment @ * @; - - -1.2 -date 89.03.27.20.19.34; author gnu; state Exp; -branches ; -next 1.1; - -1.1 -date 89.03.20.19.29.33; author gnu; state Exp; -branches ; -next ; - - -desc -@@ - - -1.2 -log -@Change HPUX_ASM to USG_SGS_ASM since it's really the Sys V -"Software Generation System" that we are fighting here. -@ -text -@/* Print m68k instructions for GDB, the GNU debugger. - Copyright (C) 1986, 1987 Free Software Foundation, Inc. - -GDB is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY. No author or distributor accepts responsibility to anyone -for the consequences of using it or for whether it serves any -particular purpose or works at all, unless he says so in writing. -Refer to the GDB General Public License for full details. - -Everyone is granted permission to copy, modify and redistribute GDB, -but only under the conditions described in the GDB General Public -License. A copy of this license is supposed to have been given to you -along with GDB so you can know your rights and responsibilities. It -should be in a file named COPYING. Among other things, the copyright -notice and this notice must be preserved on all copies. - -In other words, go ahead and share GDB, but don't try to stop -anyone else from sharing it farther. Help stamp out software hoarding! -*/ - -#include <stdio.h> - -#include "defs.h" -#include "param.h" -#include "symtab.h" -#include "opcode.h" - -/* 68k instructions are never longer than this many bytes. */ -#define MAXLEN 22 - -/* Number of elements in the opcode table. */ -#define NOPCODES (sizeof m68k_opcodes / sizeof m68k_opcodes[0]) - -extern char *reg_names[]; -char *fpcr_names[] = { "", "fpiar", "fpsr", "fpiar/fpsr", "fpcr", - "fpiar/fpcr", "fpsr/fpcr", "fpiar-fpcr"}; - -static unsigned char *print_insn_arg (); -static unsigned char *print_indexed (); -static void print_base (); -static int fetch_arg (); - -#define NEXTBYTE(p) (p += 2, ((char *)p)[-1]) - -#define NEXTWORD(p) \ - (p += 2, ((((char *)p)[-2]) << 8) + p[-1]) - -#define NEXTLONG(p) \ - (p += 4, (((((p[-4] << 8) + p[-3]) << 8) + p[-2]) << 8) + p[-1]) - -#define NEXTSINGLE(p) \ - (p += 4, *((float *)(p - 4))) - -#define NEXTDOUBLE(p) \ - (p += 8, *((double *)(p - 8))) - -#define NEXTEXTEND(p) \ - (p += 12, 0.0) /* Need a function to convert from extended to double - precision... */ - -#define NEXTPACKED(p) \ - (p += 12, 0.0) /* Need a function to convert from packed to double - precision. Actually, it's easier to print a - packed number than a double anyway, so maybe - there should be a special case to handle this... */ - -/* Print the m68k instruction at address MEMADDR in debugged memory, - on STREAM. Returns length of the instruction, in bytes. */ - -int -print_insn (memaddr, stream) - CORE_ADDR memaddr; - FILE *stream; -{ - unsigned char buffer[MAXLEN]; - register int i; - register unsigned char *p; - register char *d; - register int bestmask; - int best; - - read_memory (memaddr, buffer, MAXLEN); - - bestmask = 0; - best = -1; - for (i = 0; i < NOPCODES; i++) - { - register unsigned int opcode = m68k_opcodes[i].opcode; - register unsigned int match = m68k_opcodes[i].match; - if (((0xff & buffer[0] & (match >> 24)) == (0xff & (opcode >> 24))) - && ((0xff & buffer[1] & (match >> 16)) == (0xff & (opcode >> 16))) - && ((0xff & buffer[2] & (match >> 8)) == (0xff & (opcode >> 8))) - && ((0xff & buffer[3] & match) == (0xff & opcode))) - { - /* Don't use for printout the variants of divul and divsl - that have the same register number in two places. - The more general variants will match instead. */ - for (d = m68k_opcodes[i].args; *d; d += 2) - if (d[1] == 'D') - break; - - /* Don't use for printout the variants of most floating - point coprocessor instructions which use the same - register number in two places, as above. */ - if (*d == 0) - for (d = m68k_opcodes[i].args; *d; d += 2) - if (d[1] == 't') - break; - - if (*d == 0 && match > bestmask) - { - best = i; - bestmask = match; - } - } - } - - /* Handle undefined instructions. */ - if (best < 0) - { - fprintf (stream, "0%o", (buffer[0] << 8) + buffer[1]); - return 2; - } - - fprintf (stream, "%s", m68k_opcodes[best].name); - - /* Point at first word of argument data, - and at descriptor for first argument. */ - p = buffer + 2; - - /* Why do this this way? -MelloN */ - for (d = m68k_opcodes[best].args; *d; d += 2) - { - if (d[0] == '#') - { - if (d[1] == 'l' && p - buffer < 6) - p = buffer + 6; - else if (p - buffer < 4 && d[1] != 'C' && d[1] != '8' ) - p = buffer + 4; - } - if (d[1] >= '1' && d[1] <= '3' && p - buffer < 4) - p = buffer + 4; - if (d[1] >= '4' && d[1] <= '6' && p - buffer < 6) - p = buffer + 6; - } - - d = m68k_opcodes[best].args; - - if (*d) - fputc (' ', stream); - - while (*d) - { - p = print_insn_arg (d, buffer, p, memaddr + p - buffer, stream); - d += 2; - if (*d && *(d - 2) != 'I' && *d != 'k') - fprintf (stream, ","); - } - return p - buffer; -} - -static unsigned char * -print_insn_arg (d, buffer, p, addr, stream) - char *d; - unsigned char *buffer; - register unsigned char *p; - CORE_ADDR addr; /* PC for this arg to be relative to */ - FILE *stream; -{ - register int val; - register int place = d[1]; - int regno; - register char *regname; - register unsigned char *p1; - register double flval; - int flt_p; - - switch (*d) - { - case 'C': - fprintf (stream, "ccr"); - break; - - case 'S': - fprintf (stream, "sr"); - break; - - case 'U': - fprintf (stream, "usp"); - break; - - case 'J': - { - static struct { char *name; int value; } names[] - = {{"sfc", 0x000}, {"dfc", 0x001}, {"cacr", 0x002}, - {"usp", 0x800}, {"vbr", 0x801}, {"caar", 0x802}, - {"msp", 0x803}, {"isp", 0x804}}; - - val = fetch_arg (buffer, place, 12); - for (regno = sizeof names / sizeof names[0] - 1; regno >= 0; regno--) - if (names[regno].value == val) - { - fprintf (stream, names[regno].name); - break; - } - if (regno < 0) - fprintf (stream, "%d", val); - } - break; - - case 'Q': - val = fetch_arg (buffer, place, 3); - if (val == 0) val = 8; - fprintf (stream, "#%d", val); - break; - - case 'M': - val = fetch_arg (buffer, place, 8); - if (val & 0x80) - val = val - 0x100; - fprintf (stream, "#%d", val); - break; - - case 'T': - val = fetch_arg (buffer, place, 4); - fprintf (stream, "#%d", val); - break; - - case 'D': - fprintf (stream, "%s", reg_names[fetch_arg (buffer, place, 3)]); - break; - - case 'A': - fprintf (stream, "%s", reg_names[fetch_arg (buffer, place, 3) + 010]); - break; - - case 'R': - fprintf (stream, "%s", reg_names[fetch_arg (buffer, place, 4)]); - break; - - case 'F': - fprintf (stream, "fp%d", fetch_arg (buffer, place, 3)); - break; - - case 'O': - val = fetch_arg (buffer, place, 6); - if (val & 0x20) - fprintf (stream, "%s", reg_names [val & 7]); - else - fprintf (stream, "%d", val); - break; - - case '+': - fprintf (stream, "(%s)+", reg_names[fetch_arg (buffer, place, 3) + 8]); - break; - - case '-': - fprintf (stream, "-(%s)", reg_names[fetch_arg (buffer, place, 3) + 8]); - break; - - case 'k': - if (place == 'k') - fprintf (stream, "{%s}", reg_names[fetch_arg (buffer, place, 3)]); - else if (place == 'C') - { - val = fetch_arg (buffer, place, 7); - if ( val > 63 ) /* This is a signed constant. */ - val -= 128; - fprintf (stream, "{#%d}", val); - } - else - error ("Invalid arg format in opcode table: \"%c%c\".", - *d, place); - break; - - case '#': - p1 = buffer + 2; - if (place == 's') - val = fetch_arg (buffer, place, 4); - else if (place == 'C') - val = fetch_arg (buffer, place, 7); - else if (place == '8') - val = fetch_arg (buffer, place, 3); - else if (place == '3') - val = fetch_arg (buffer, place, 8); - else if (place == 'b') - val = NEXTBYTE (p1); - else if (place == 'w') - val = NEXTWORD (p1); - else if (place == 'l') - val = NEXTLONG (p1); - else - error ("Invalid arg format in opcode table: \"%c%c\".", - *d, place); - fprintf (stream, "#%d", val); - break; - - case '^': - if (place == 's') - val = fetch_arg (buffer, place, 4); - else if (place == 'C') - val = fetch_arg (buffer, place, 7); - else if (place == '8') - val = fetch_arg (buffer, place, 3); - else if (place == 'b') - val = NEXTBYTE (p); - else if (place == 'w') - val = NEXTWORD (p); - else if (place == 'l') - val = NEXTLONG (p); - else - error ("Invalid arg format in opcode table: \"%c%c\".", - *d, place); - fprintf (stream, "#%d", val); - break; - - case 'B': - if (place == 'b') - val = NEXTBYTE (p); - else if (place == 'w') - val = NEXTWORD (p); - else if (place == 'l') - val = NEXTLONG (p); - else if (place == 'g') - { - val = ((char *)buffer)[1]; - if (val == 0) - val = NEXTWORD (p); - else if (val == -1) - val = NEXTLONG (p); - } - else if (place == 'c') - { - if (buffer[1] & 0x40) /* If bit six is one, long offset */ - val = NEXTLONG (p); - else - val = NEXTWORD (p); - } - else - error ("Invalid arg format in opcode table: \"%c%c\".", - *d, place); - - print_address (addr + val, stream); - break; - - case 'd': - val = NEXTWORD (p); - fprintf (stream, "%d(%s)", val, reg_names[fetch_arg (buffer, place, 3)]); - break; - - case 's': - fprintf (stream, "%s", fpcr_names[fetch_arg (buffer, place, 3)]); - break; - - case 'I': - val = fetch_arg (buffer, 'd', 3); /* Get coprocessor ID... */ - if (val != 1) /* Unusual coprocessor ID? */ - fprintf (stream, "(cpid=%d) ", val); - if (place == 'i') - p += 2; /* Skip coprocessor extended operands */ - break; - - case '*': - case '~': - case '%': - case ';': - case '@@': - case '!': - case '$': - case '?': - case '/': - case '&': - - if (place == 'd') - { - val = fetch_arg (buffer, 'x', 6); - val = ((val & 7) << 3) + ((val >> 3) & 7); - } - else - val = fetch_arg (buffer, 's', 6); - - /* Get register number assuming address register. */ - regno = (val & 7) + 8; - regname = reg_names[regno]; - switch (val >> 3) - { - case 0: - fprintf (stream, "%s", reg_names[val]); - break; - - case 1: - fprintf (stream, "%s", regname); - break; - - case 2: - fprintf (stream, "(%s)", regname); - break; - - case 3: - fprintf (stream, "(%s)+", regname); - break; - - case 4: - fprintf (stream, "-(%s)", regname); - break; - - case 5: - val = NEXTWORD (p); - fprintf (stream, "%d(%s)", val, regname); - break; - - case 6: - p = print_indexed (regno, p, addr, stream); - break; - - case 7: - switch (val & 7) - { - case 0: - val = NEXTWORD (p); - fprintf (stream, "@@#"); - print_address (val, stream); - break; - - case 1: - val = NEXTLONG (p); - fprintf (stream, "@@#"); - print_address (val, stream); - break; - - case 2: - val = NEXTWORD (p); - print_address (addr + val, stream); - break; - - case 3: - p = print_indexed (-1, p, addr, stream); - break; - - case 4: - flt_p = 1; /* Assume it's a float... */ - switch( place ) - { - case 'b': - val = NEXTBYTE (p); - flt_p = 0; - break; - - case 'w': - val = NEXTWORD (p); - flt_p = 0; - break; - - case 'l': - val = NEXTLONG (p); - flt_p = 0; - break; - - case 'f': - flval = NEXTSINGLE(p); - break; - - case 'F': - flval = NEXTDOUBLE(p); - break; - - case 'x': - flval = NEXTEXTEND(p); - break; - - case 'p': - flval = NEXTPACKED(p); - break; - - default: - error ("Invalid arg format in opcode table: \"%c%c\".", - *d, place); - } - if ( flt_p ) /* Print a float? */ - fprintf (stream, "#%g", flval); - else - fprintf (stream, "#%d", val); - break; - - default: - fprintf (stream, "<invalid address mode 0%o>", val); - } - } - break; - - default: - error ("Invalid arg format in opcode table: \"%c\".", *d); - } - - return (unsigned char *) p; -} - -/* Fetch BITS bits from a position in the instruction specified by CODE. - CODE is a "place to put an argument", or 'x' for a destination - that is a general address (mode and register). - BUFFER contains the instruction. */ - -static int -fetch_arg (buffer, code, bits) - unsigned char *buffer; - char code; - int bits; -{ - register int val; - switch (code) - { - case 's': - val = buffer[1]; - break; - - case 'd': /* Destination, for register or quick. */ - val = (buffer[0] << 8) + buffer[1]; - val >>= 9; - break; - - case 'x': /* Destination, for general arg */ - val = (buffer[0] << 8) + buffer[1]; - val >>= 6; - break; - - case 'k': - val = (buffer[3] >> 4); - break; - - case 'C': - val = buffer[3]; - break; - - case '1': - val = (buffer[2] << 8) + buffer[3]; - val >>= 12; - break; - - case '2': - val = (buffer[2] << 8) + buffer[3]; - val >>= 6; - break; - - case '3': - case 'j': - val = (buffer[2] << 8) + buffer[3]; - break; - - case '4': - val = (buffer[4] << 8) + buffer[5]; - val >>= 12; - break; - - case '5': - val = (buffer[4] << 8) + buffer[5]; - val >>= 6; - break; - - case '6': - val = (buffer[4] << 8) + buffer[5]; - break; - - case '7': - val = (buffer[2] << 8) + buffer[3]; - val >>= 7; - break; - - case '8': - val = (buffer[2] << 8) + buffer[3]; - val >>= 10; - break; - - default: - abort (); - } - - switch (bits) - { - case 3: - return val & 7; - case 4: - return val & 017; - case 5: - return val & 037; - case 6: - return val & 077; - case 7: - return val & 0177; - case 8: - return val & 0377; - case 12: - return val & 07777; - default: - abort (); - } -} - -/* Print an indexed argument. The base register is BASEREG (-1 for pc). - P points to extension word, in buffer. - ADDR is the nominal core address of that extension word. */ - -static unsigned char * -print_indexed (basereg, p, addr, stream) - int basereg; - unsigned char *p; - FILE *stream; - CORE_ADDR addr; -{ - register int word; - static char *scales[] = {"", "*2", "*4", "*8"}; - register int base_disp; - register int outer_disp; - char buf[40]; - - word = NEXTWORD (p); - - /* Generate the text for the index register. - Where this will be output is not yet determined. */ - sprintf (buf, "[%s.%c%s]", - reg_names[(word >> 12) & 0xf], - (word & 0x800) ? 'l' : 'w', - scales[(word >> 9) & 3]); - - /* Handle the 68000 style of indexing. */ - - if ((word & 0x100) == 0) - { - print_base (basereg, - ((word & 0x80) ? word | 0xff00 : word & 0xff) - + ((basereg == -1) ? addr : 0), - stream); - fprintf (stream, "%s", buf); - return p; - } - - /* Handle the generalized kind. */ - /* First, compute the displacement to add to the base register. */ - - if (word & 0200) - basereg = -2; - if (word & 0100) - buf[0] = 0; - base_disp = 0; - switch ((word >> 4) & 3) - { - case 2: - base_disp = NEXTWORD (p); - break; - case 3: - base_disp = NEXTLONG (p); - } - if (basereg == -1) - base_disp += addr; - - /* Handle single-level case (not indirect) */ - - if ((word & 7) == 0) - { - print_base (basereg, base_disp, stream); - fprintf (stream, "%s", buf); - return p; - } - - /* Two level. Compute displacement to add after indirection. */ - - outer_disp = 0; - switch (word & 3) - { - case 2: - outer_disp = NEXTWORD (p); - break; - case 3: - outer_disp = NEXTLONG (p); - } - - fprintf (stream, "%d(", outer_disp); - print_base (basereg, base_disp, stream); - - /* If postindexed, print the closeparen before the index. */ - if (word & 4) - fprintf (stream, ")%s", buf); - /* If preindexed, print the closeparen after the index. */ - else - fprintf (stream, "%s)", buf); - - return p; -} - -/* Print a base register REGNO and displacement DISP, on STREAM. - REGNO = -1 for pc, -2 for none (suppressed). */ - -static void -print_base (regno, disp, stream) - int regno; - int disp; - FILE *stream; -{ - if (regno == -2) - fprintf (stream, "%d", disp); - else if (regno == -1) - fprintf (stream, "0x%x", disp); - else - fprintf (stream, "%d(%s)", disp, reg_names[regno]); -} - -/* This is not part of insn printing, but it is machine-specific, - so this is a convenient place to put it. - - Convert a 68881 extended float to a double. - FROM is the address of the extended float. - Store the double in *TO. */ - -convert_from_68881 (from, to) - char *from; - double *to; -{ -#ifdef USG_SGS_ASM - asm ("mov.l 8(%a6),%a0"); - asm ("mov.l 12(%a6),%a1"); - asm ("fmove.x (%a0),%fp0"); - asm ("fmove.d %fp0,(%a1)"); -#else /* not USG_SGS_ASM */ -#if 0 - asm ("movl a6@@(8),a0"); - asm ("movl a6@@(12),a1"); - asm ("fmovex a0@@,fp0"); - asm ("fmoved fp0,a1@@"); -#else - /* Hand-assemble those insns since some assemblers lose - and some have different syntax. */ - asm (".word 020156"); - asm (".word 8"); - asm (".word 021156"); - asm (".word 12"); - asm (".long 0xf2104800"); - asm (".long 0xf2117400"); -#endif -#endif /* not USG_SGS_ASM */ -} - -/* The converse: convert the double *FROM to an extended float - and store where TO points. */ - -convert_to_68881 (from, to) - double *from; - char *to; -{ -#ifdef USG_SGS_ASM - asm ("mov.l 8(%a6),%a0"); - asm ("mov.l 12(%a6),%a1"); - asm ("fmove.d (%a0),%fp0"); - asm ("fmove.x %fp0,(%a1)"); -#else /* not USG_SGS_ASM */ -#if 0 - asm ("movl a6@@(8),a0"); - asm ("movl a6@@(12),a1"); - asm ("fmoved a0@@,fp0"); - asm ("fmovex fp0,a1@@"); -#else - /* Hand-assemble those insns since some assemblers lose. */ - asm (".word 020156"); - asm (".word 8"); - asm (".word 021156"); - asm (".word 12"); - asm (".long 0xf2105400"); - asm (".long 0xf2116800"); -#endif -#endif /* not USG_SGS_ASM */ -} -@ - - -1.1 -log -@Initial revision -@ -text -@d717 1 -a717 1 -#ifdef HPUX_ASM -d722 1 -a722 1 -#else /* not HPUX_ASM */ -d738 1 -a738 1 -#endif /* not HPUX_ASM */ -d748 1 -a748 1 -#ifdef HPUX_ASM -d753 1 -a753 1 -#else /* not HPUX_ASM */ -d768 1 -a768 1 -#endif /* not HPUX_ASM */ -@ |