diff options
Diffstat (limited to 'gdb/RCS/Makefile,v')
| -rw-r--r-- | gdb/RCS/Makefile,v | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/gdb/RCS/Makefile,v b/gdb/RCS/Makefile,v new file mode 100644 index 0000000..fd71c1c --- /dev/null +++ b/gdb/RCS/Makefile,v @@ -0,0 +1,367 @@ +head 1.4; +access ; +symbols ; +locks ; strict; +comment @# @; + + +1.4 +date 89.03.27.21.28.33; author gnu; state Exp; +branches ; +next 1.3; + +1.3 +date 89.03.27.18.33.31; author gnu; state Exp; +branches ; +next 1.2; + +1.2 +date 89.03.13.19.02.58; author gnu; state Exp; +branches ; +next 1.1; + +1.1 +date 89.02.09.03.15.53; author gnu; state Exp; +branches ; +next ; + + +desc +@@ + + +1.4 +log +@More general support for ALLOCA and other local library routines; +other minor cleanup. +@ +text +@# On HPUX, you need to add -Ihp-include to CFLAGS. +# The headers in the directory hp-include override system headers +# and tell GDB to use BSD executable file format. +# You must also define REGEX & REGEX1 below and ALLOCA & ALLOCA1 (get +# alloca.c from the emacs distribution) to the CLIBS. +# If you compile GDB with GCC on HPUX, you must make sure that the "nm" used +# in "munch" is GNU's nm. This is because gcc uses a different .o +# file format than the native HPUX compiler. + +# On USG (System V) machines, you must make sure to setup REGEX & +# REGEX1 to point at regex.o and use the USG version of CLIBS. +# If your system has a broken alloca() -- most do -- then get +# alloca.c from the GNU Emacs distribution and set ALLOCA & ALLOCA1. +# Also, if you compile gdb with a compiler which uses the coff +# encapsulation feature (this is a function of the compiler used, NOT +# of the m-?.h file selected by config.gdb), you must make sure that +# the GNU nm is the one that is used by munch. + +# On Sunos 4.0 machines, make sure to compile *without* shared +# libraries if you want to run gdb on itself. Make sure to compile +# any program on which you want to run gdb without shared libraries. + +# If you are compiling with GCC, make sure that either 1) You use the +# -traditional flag, or 2) You have the fixed include files where GCC +# can reach them. Otherwise the ioctl calls in inflow.c will be +# incorrectly compiled. The "fixincludes" script in the gcc +# distribution will probably fix your include files up. + +CC=cc +SHELL=/bin/sh + +# Set this up with gcc if you have gnu ld and the loader will print out +# line numbers for undefinded refs. +CC-LD=${CC} + +# -I. for "#include <obstack.h>". Possibly regex.h also. +#CFLAGS = -g -pg -I. -O +CFLAGS = -I. -g +#LDFLAGS = -pg -g +LDFLAGS = -g + +# define this to be "obstack.o" if you don't have the obstack library installed +# you must at the same time define OBSTACK1 as "obstack.o" +# so that the dependencies work right. Similarly with REGEX and "regex.o". +# You must define REGEX and REGEX1 on USG machines. +# If your system is missing alloca(), or, more likely, it's there but it +# doesn't work, define ALLOCA and ALLOCA1. +OBSTACK = obstack.o +OBSTACK1 = obstack.o +REGEX = regex.o +REGEX1 = regex.o +ALLOCA = alloca.o +ALLOCA1 = alloca.o +ADD_FILES = $(OBSTACK) $(REGEX) $(ALLOCA) $(GNU_MALLOC) +ADD_DEPS = $(OBSTACK1) $(REGEX1) $(ALLOCA1) $(GNU_MALLOC) + +# +# define this to be "malloc.o" if you want to use the gnu malloc routine +# (useful for debugging memory allocation problems in gdb). Otherwise, leave +# it blank. +GNU_MALLOC = +#GNU_MALLOC = malloc.o + +# Flags to be used in compiling malloc.o +# Specify range checking for storage allocation. +MALLOC_FLAGS = +#MALLOC_FLAGS = ${CFLAGS} -Drcheck -Dbotch=fatal -DMSTATS + +# for BSD +CLIBS = $(ADD_FILES) +# for USG +#CLIBS= $(ADD_FILES) -lPW + +SFILES = blockframe.c breakpoint.c coffread.c command.c core.c dbxread.c \ + environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ + kdb-start.c main.c printcmd.c \ + remote.c source.c stack.c standalone.c stuff.c symmisc.c symtab.c \ + utils.c valarith.c valops.c valprint.c values.c version.c expread.y \ + xgdb.c + +DEPFILES = convex-dep.c umax-dep.c gould-dep.c default-dep.c sun3-dep.c \ + sparc-dep.c hp9k320-dep.c news-dep.c i386-dep.c + +PINSNS = gld-pinsn.c i386-pinsn.c sparc-pinsn.c vax-pinsn.c m68k-pinsn.c \ + ns32k-pinsn.c + +HFILES = command.h defs.h environ.h expression.h frame.h getpagesize.h \ + inferior.h symseg.h symtab.h value.h wait.h \ + a.out.encap.h a.out.gnu.h stab.gnu.h + +OPCODES = m68k-opcode.h pn-opcode.h sparc-opcode.h npl-opcode.h vax-opcode.h \ + ns32k-opcode.h + +MFILES = m-hp9k320.h m-i386.h m-i386gas.h m-isi.h m-merlin.h m-news.h \ + m-npl.h m-pn.h m-sparc.h m-sun2.h m-sun3.h m-sun2os4.h \ + m-sun3os4.h m-sun4os4.h m-umax.h m-vax.h + +POSSLIBS = obstack.h obstack.c regex.c regex.h malloc.c + +TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c + +OTHERS = Makefile createtags munch config.gdb ChangeLog README TAGS \ + gdb.texinfo .gdbinit COPYING expread.tab.c stab.def hp-include + +TAGFILES = ${SFILES} ${DEPFILES} ${PINSNS} ${HFILES} ${OPCODES} ${MFILES} \ + ${POSSLIBS} +TARFILES = ${TAGFILES} ${OTHERS} + +OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ + values.o eval.o valops.o valarith.o valprint.o printcmd.o \ + symtab.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o \ + command.o utils.o expread.o expprint.o pinsn.o environ.o version.o + +TSOBS = core.o inflow.o dep.o + +NTSOBS = standalone.o + +TSSTART = /lib/crt0.o + +NTSSTART = kdb-start.o + +gdb : $(OBS) $(TSOBS) $(ADD_DEPS) + -rm -f init.c + ./munch $(OBS) $(TSOBS) > init.c + ${CC-LD} $(LDFLAGS) -o gdb init.c $(OBS) $(TSOBS) $(CLIBS) + +xgdb : $(OBS) $(TSOBS) xgdb.o $(ADD_DEPS) + -rm -f init.c + ./munch $(OBS) $(TSOBS) xgdb.o > init.c + $(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \ + -lXaw -lXt -lX11 $(CLIBS) + +kdb : $(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS) + -rm -f init.c + ./munch $(OBS) $(NTSOBS) > init.c + $(CC-LD) $(LDFLAGS) -c init.c $(CLIBS) + ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o -lc $(CLIBS) + +# If it can figure out the appropriate order, createtags will make sure +# that the proper m-*, *-dep, *-pinsn, and *-opcode files come first +# in the tags list. It will attempt to do the same for dbxread.c and +# coffread.c. This makes using M-. on machine dependent routines much +# easier. +# +TAGS: ${TAGFILES} + createtags ${TAGFILES} +tags: TAGS + +gdb.tar: ${TARFILES} + rm -f gdb.tar + mkdir dist-gdb + cd dist-gdb ; for i in ${TARFILES} ; do ln -s ../$$i . ; done + tar chf gdb.tar dist-gdb + rm -rf dist-gdb + +gdb.tar.Z: gdb.tar + compress gdb.tar + +clean: + -rm -f ${OBS} ${TSOBS} ${NTSOBS} ${OBSTACK} ${REGEX} + -rm -f init.c init.o + -rm -f gdb + +realclean: clean + -rm -f expread.tab.c tags TAGS + +xgdb.o : xgdb.c defs.h param.h symtab.h frame.h + $(CC) -c $(CFLAGS) xgdb.c -o $@@ + +expread.tab.c : expread.y + @@echo 'Expect 101 shift/reduce conflicts and 1 reduce/reduce conflict.' + yacc expread.y + mv y.tab.c expread.tab.c + +expread.o : expread.tab.c defs.h param.h symtab.h frame.h expression.h + $(CC) -c ${CFLAGS} expread.tab.c + mv expread.tab.o expread.o + +# +# Only useful if you are using the gnu malloc routines. +# +malloc.o : malloc.c + ${CC} -c ${MALLOC_FLAGS} malloc.c + +# +# dep.o depends on ALL the dep files since we don't know which one +# is really being used. +# +dep.o : ${DEPFILES} defs.h param.h frame.h inferior.h obstack.h \ + a.out.encap.h + +# pinsn.o depends on ALL the opcode printers +# since we don't know which one is really being used. +pinsn.o : ${PINSNS} defs.h param.h symtab.h obstack.h symseg.h frame.h \ + ${OPCODES} + +# +# The rest of this is a standard dependencies list (hand edited output of +# cpp -M). It does not include dependencies of .o files on .c files. +# +blockframe.o : defs.h param.h symtab.h obstack.h symseg.h frame.h +breakpoint.o : defs.h param.h symtab.h obstack.h symseg.h frame.h +coffread.o : defs.h param.h +command.o : command.h defs.h +core.o : defs.h param.h a.out.encap.h +dbxread.o : param.h defs.h symtab.h obstack.h symseg.h a.out.encap.h \ + stab.gnu.h +environ.o : environ.h +eval.o : defs.h param.h symtab.h obstack.h symseg.h value.h expression.h +expprint.o : defs.h symtab.h obstack.h symseg.h param.h expression.h +findvar.o : defs.h param.h symtab.h obstack.h symseg.h frame.h value.h +infcmd.o : defs.h param.h symtab.h obstack.h symseg.h frame.h inferior.h \ + environ.h value.h +inflow.o : defs.h param.h frame.h inferior.h +infrun.o : defs.h param.h symtab.h obstack.h symseg.h frame.h inferior.h \ + wait.h +kdb-start.o : defs.h param.h +main.o : defs.h command.h param.h +malloc.o : getpagesize.h +obstack.o : obstack.h +printcmd.o : defs.h param.h frame.h symtab.h obstack.h symseg.h value.h \ + expression.h +regex.o : regex.h +remote.o : defs.h param.h frame.h inferior.h wait.h +source.o : defs.h symtab.h obstack.h symseg.h param.h +stack.o : defs.h param.h symtab.h obstack.h symseg.h frame.h +standalone.o : defs.h param.h symtab.h obstack.h symseg.h frame.h \ + inferior.h wait.h +symmisc.o : defs.h symtab.h obstack.h symseg.h obstack.h +symtab.o : defs.h symtab.h obstack.h symseg.h param.h obstack.h +utils.o : defs.h param.h +valarith.o : defs.h param.h symtab.h obstack.h symseg.h value.h expression.h +valops.o : defs.h param.h symtab.h obstack.h symseg.h value.h frame.h \ + inferior.h +valprint.o : defs.h param.h symtab.h obstack.h symseg.h value.h +values.o : defs.h param.h symtab.h obstack.h symseg.h value.h + +robotussin.h : getpagesize.h +symtab.h : obstack.h symseg.h +a.out.encap.h : a.out.gnu.h +@ + + +1.3 +log +@A/UX changes. Use cc, use local regex.o, use local alloca.o +@ +text +@d4 2 +a5 2 +# You must also define REGEX & REGEX1 below and add alloca.o (from +# the emacs distribution) to the CLIBS. +d12 2 +d26 2 +a27 1 +# incorrectly compiled. +d46 2 +d52 4 +d70 1 +a70 1 +#CLIBS = $(OBSTACK) $(REGEX) $(GNU_MALLOC) +d72 1 +a72 1 +CLIBS= $(OBSTACK) $(REGEX) $(GNU_MALLOC) alloca.o +d122 1 +a122 1 +gdb : $(OBS) $(TSOBS) $(OBSTACK1) $(REGEX1) ${GNU_MALLOC} +d127 1 +a127 1 +xgdb : $(OBS) $(TSOBS) xgdb.o $(OBSTACK1) $(REGEX1) ${GNU_MALLOC} +d133 1 +a133 1 +kdb : $(NTSSTART) $(OBS) $(NTSOBS) $(OBSTACK1) $(REGEX1) ${GNU_MALLOC} +d161 1 +a161 1 + -rm -f init.c +d165 1 +a165 1 + -rm -f expread.tab.c +@ + + +1.2 +log +@All rm's to rm -f's. +@ +text +@d26 1 +a26 1 +CC=gcc +d45 2 +a46 2 +REGEX = +REGEX1 = +d61 1 +a61 1 +CLIBS = $(OBSTACK) $(REGEX) $(GNU_MALLOC) +d63 1 +a63 1 +#CLIBS= $(OBSTACK) $(REGEX) $(GNU_MALLOC) -lPW +@ + + +1.1 +log +@Initial revision +@ +text +@d26 1 +a26 1 +CC=/bin/cc +d114 1 +a114 1 + -rm init.c +d119 1 +a119 1 + -rm init.c +d125 1 +a125 1 + -rm init.c +d151 3 +a153 3 + -rm ${OBS} ${TSOBS} ${NTSOBS} ${OBSTACK} ${REGEX} + -rm init.c + -rm gdb +d156 1 +a156 1 + -rm expread.tab.c +@ |