diff options
Diffstat (limited to 'gas')
| -rwxr-xr-x | gas/config/a.out.gnu.h | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/gas/config/a.out.gnu.h b/gas/config/a.out.gnu.h new file mode 100755 index 0000000..fe777f9 --- /dev/null +++ b/gas/config/a.out.gnu.h @@ -0,0 +1,351 @@ +/* This file is a.out.gnu.h + + Copyright (C) 1987-1992 Free Software Foundation, Inc. + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef __A_OUT_GNU_H__ +#define __A_OUT_GNU_H__ + +#include "aout/reloc.h" + +#define __GNU_EXEC_MACROS__ + +#ifndef __STRUCT_EXEC_OVERRIDE__ + +/* This is the layout on disk of a Unix V7, Berkeley, SunOS, Vax Ultrix + "struct exec". Don't assume that on this machine, the "struct exec" + will lay out the same sizes or alignments. */ + +struct exec_bytes { + unsigned char a_info[4]; + unsigned char a_text[4]; + unsigned char a_data[4]; + unsigned char a_bss[4]; + unsigned char a_syms[4]; + unsigned char a_entry[4]; + unsigned char a_trsize[4]; + unsigned char a_drsize[4]; +}; + +/* How big the "struct exec" is on disk */ +#define EXEC_BYTES_SIZE (8 * 4) + +/* This is the layout in memory of a "struct exec" while we process it. */ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#endif /* __STRUCT_EXEC_OVERRIDE__ */ + +/* these go in the N_MACHTYPE field */ +/* These symbols could be defined by code from Suns...punt 'em */ +#undef M_UNKNOWN +#undef M_68010 +#undef M_68020 +#undef M_SPARC +enum machine_type { + M_UNKNOWN = 0, + M_68010 = 1, + M_68020 = 2, + M_SPARC = 3, + /* skip a bunch so we don't run into any of sun's numbers */ + M_386 = 100, + M_29K = 101, + M_RS6000 = 102, /* IBM RS/6000 */ + /* HP/BSD formats */ + M_HP200 = 200, /* hp200 (68010) BSD binary */ + M_HP300 = 300, /* hp300 (68020+68881) BSD binary */ + M_HPUX23 = 0x020C, /* hp200/300 HPUX binary */ +}; + +#define N_MAGIC(exec) ((exec).a_info & 0xffff) +#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) +#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) +#define N_SET_INFO(exec, magic, type, flags) \ + ((exec).a_info = ((magic) & 0xffff) \ + | (((int)(type) & 0xff) << 16) \ + | (((flags) & 0xff) << 24)) +#define N_SET_MAGIC(exec, magic) \ + ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) + +#define N_SET_MACHTYPE(exec, machtype) \ + ((exec).a_info = \ + ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) + +#define N_SET_FLAGS(exec, flags) \ + ((exec).a_info = \ + ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) + +/* Code indicating object file or impure executable. */ +#define OMAGIC 0407 +/* Code indicating pure executable. */ +#define NMAGIC 0410 +/* Code indicating demand-paged executable. */ +#define ZMAGIC 0413 + +/* Virtual Address of text segment from the a.out file. For OMAGIC, + (almost always "unlinked .o's" these days), should be zero. + For linked files, should reflect reality if we know it. */ + +#ifndef N_TXTADDR +#define N_TXTADDR(x) (N_MAGIC(x)==OMAGIC? 0 : TEXT_START_ADDR) +#endif + +#ifndef N_BADMAG +#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ + && N_MAGIC(x) != NMAGIC \ + && N_MAGIC(x) != ZMAGIC) +#endif + +/* By default, segment size is constant. But on some machines, it can + be a function of the a.out header (e.g. machine type). */ +#ifndef N_SEGSIZE +#define N_SEGSIZE(x) SEGMENT_SIZE +#endif + + /* This complexity is for encapsulated COFF support */ +#ifndef _N_HDROFF +#define _N_HDROFF(x) (N_SEGSIZE(x) - sizeof (struct exec)) +#endif + +#ifndef N_TXTOFF +#define N_TXTOFF(x) (N_MAGIC(x) == ZMAGIC ? \ + _N_HDROFF((x)) + sizeof (struct exec) : \ + sizeof (struct exec)) +#endif + + +#ifndef N_DATOFF +#define N_DATOFF(x) ( N_TXTOFF(x) + (x).a_text ) +#endif + +#ifndef N_TRELOFF +#define N_TRELOFF(x) ( N_DATOFF(x) + (x).a_data ) +#endif + +#ifndef N_DRELOFF +#define N_DRELOFF(x) ( N_TRELOFF(x) + (x).a_trsize ) +#endif + +#ifndef N_SYMOFF +#define N_SYMOFF(x) ( N_DRELOFF(x) + (x).a_drsize ) +#endif + +#ifndef N_STROFF +#define N_STROFF(x) ( N_SYMOFF(x) + (x).a_syms ) +#endif + +/* Address of text segment in memory after it is loaded. */ +#ifndef N_TXTADDR +#define N_TXTADDR(x) 0 +#endif + +#ifndef N_DATADDR +#define N_DATADDR(x) \ + (N_MAGIC(x)==OMAGIC? (N_TXTADDR(x)+(x).a_text) \ + : (N_SEGSIZE(x) + ((N_TXTADDR(x)+(x).a_text-1) & ~(N_SEGSIZE(x)-1)))) +#endif + +/* Address of bss segment in memory after it is loaded. */ +#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) + +struct nlist { + union { + char *n_name; + struct nlist *n_next; + long n_strx; + } n_un; + unsigned char n_type; + char n_other; + short n_desc; + unsigned long n_value; +}; + +#define N_UNDF 0 +#define N_ABS 2 +#define N_TEXT 4 +#define N_DATA 6 +#define N_BSS 8 +#define N_COMM 0x12 /* common (visible in shared lib commons) */ +#define N_FN 0x1F /* File name of a .o file */ + +/* Note: N_EXT can only usefully be OR-ed with N_UNDF, N_ABS, N_TEXT, + N_DATA, or N_BSS. When the low-order bit of other types is set, + (e.g. N_WARNING versus N_FN), they are two different types. */ +#define N_EXT 1 +#define N_TYPE 036 +#define N_STAB 0340 + +/* The following type indicates the definition of a symbol as being + an indirect reference to another symbol. The other symbol + appears as an undefined reference, immediately following this symbol. + + Indirection is asymmetrical. The other symbol's value will be used + to satisfy requests for the indirect symbol, but not vice versa. + If the other symbol does not have a definition, libraries will + be searched to find a definition. */ + +#define N_INDR 0xa + +/* The following symbols refer to set elements. + All the N_SET[ATDB] symbols with the same name form one set. + Space is allocated for the set in the text section, and each set + element's value is stored into one word of the space. + The first word of the space is the length of the set (number of elements). + + The address of the set is made into an N_SETV symbol + whose name is the same as the name of the set. + This symbol acts like a N_DATA global symbol + in that it can satisfy undefined external references. */ + +/* These appear as input to LD, in a .o file. */ +#define N_SETA 0x14 /* Absolute set element symbol */ +#define N_SETT 0x16 /* Text set element symbol */ +#define N_SETD 0x18 /* Data set element symbol */ +#define N_SETB 0x1A /* Bss set element symbol */ + +/* This is output from LD. */ +#define N_SETV 0x1C /* Pointer to set vector in data area. */ + +/* Warning symbol. The text gives a warning message, the next symbol + in the table will be undefined. When the symbol is referenced, the + message is printed. */ + +#define N_WARNING 0x1e + +/* This structure describes a single relocation to be performed. + The text-relocation section of the file is a vector of these structures, + all of which apply to the text section. + Likewise, the data-relocation section applies to the data section. */ + +/* The following enum and struct were borrowed from SunOS's + /usr/include/sun4/a.out.h and extended to handle + other machines. It is currently used on SPARC and AMD 29000. + + reloc_ext_bytes is how it looks on disk. reloc_info_extended is + how we might process it on a native host. */ + +struct reloc_ext_bytes { + unsigned char r_address[4]; + unsigned char r_index[3]; + unsigned char r_bits[1]; + unsigned char r_addend[4]; +}; + +#define RELOC_EXT_BITS_EXTERN_BIG 0x80 +#define RELOC_EXT_BITS_EXTERN_LITTLE 0x01 + +#define RELOC_EXT_BITS_TYPE_BIG 0x1F +#define RELOC_EXT_BITS_TYPE_SH_BIG 0 +#define RELOC_EXT_BITS_TYPE_LITTLE 0xF8 +#define RELOC_EXT_BITS_TYPE_SH_LITTLE 3 + +#define RELOC_EXT_SIZE 12 /* Bytes per relocation entry */ + +struct reloc_info_extended +{ + unsigned long r_address; + unsigned int r_index:24; +# define r_symbolnum r_index + unsigned r_extern:1; + unsigned :2; + /* RS/6000 compiler does not support enum bitfield + enum reloc_type r_type:5; */ + enum reloc_type r_type; + long int r_addend; +}; + +/* The standard, old-fashioned, Berkeley compatible relocation struct */ + +struct reloc_std_bytes { + unsigned char r_address[4]; + unsigned char r_index[3]; + unsigned char r_bits[1]; +}; + +#define RELOC_STD_BITS_PCREL_BIG 0x80 +#define RELOC_STD_BITS_PCREL_LITTLE 0x01 + +#define RELOC_STD_BITS_LENGTH_BIG 0x60 +#define RELOC_STD_BITS_LENGTH_SH_BIG 5 /* To shift to units place */ +#define RELOC_STD_BITS_LENGTH_LITTLE 0x06 +#define RELOC_STD_BITS_LENGTH_SH_LITTLE 1 + +#define RELOC_STD_BITS_EXTERN_BIG 0x10 +#define RELOC_STD_BITS_EXTERN_LITTLE 0x08 + +#define RELOC_STD_BITS_BASEREL_BIG 0x08 +#define RELOC_STD_BITS_BASEREL_LITTLE 0x08 + +#define RELOC_STD_BITS_JMPTABLE_BIG 0x04 +#define RELOC_STD_BITS_JMPTABLE_LITTLE 0x04 + +#define RELOC_STD_BITS_RELATIVE_BIG 0x02 +#define RELOC_STD_BITS_RELATIVE_LITTLE 0x02 + +#define RELOC_STD_SIZE 8 /* Bytes per relocation entry */ + +#ifndef CUSTOM_RELOC_FORMAT +struct relocation_info +{ + /* Address (within segment) to be relocated. */ + int r_address; + /* The meaning of r_symbolnum depends on r_extern. */ + unsigned int r_symbolnum:24; + /* Nonzero means value is a pc-relative offset + and it should be relocated for changes in its own address + as well as for changes in the symbol or section specified. */ + unsigned int r_pcrel:1; + /* Length (as exponent of 2) of the field to be relocated. + Thus, a value of 2 indicates 1<<2 bytes. */ + unsigned int r_length:2; + /* 1 => relocate with value of symbol. + r_symbolnum is the index of the symbol + in file's the symbol table. + 0 => relocate with the address of a segment. + r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS + (the N_EXT bit may be set also, but signifies nothing). */ + unsigned int r_extern:1; + /* The next three bits are for SunOS shared libraries, and seem to + be undocumented. */ + unsigned int r_baserel:1; /* Linkage table relative */ + unsigned int r_jmptable:1; /* pc-relative to jump table */ + +#ifdef TC_NS32K +#define r_bsr r_baserel +#define r_disp r_jmptable +#endif /* TC_NS32K */ + + unsigned int r_relative:1; /* "relative relocation" */ + /* unused */ + unsigned int r_pad:1; /* Padding -- set to zero */ +}; +#endif /* CUSTOM_RELOC_FORMAT */ + +#endif /* __A_OUT_GNU_H__ */ + +/* end of a.out.gnu.h */ |