aboutsummaryrefslogtreecommitdiff
path: root/gas/config
diff options
context:
space:
mode:
Diffstat (limited to 'gas/config')
-rw-r--r--gas/config/tc-mips.c604
1 files changed, 328 insertions, 276 deletions
diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c
index dbf9c6e..4814a69 100644
--- a/gas/config/tc-mips.c
+++ b/gas/config/tc-mips.c
@@ -259,6 +259,9 @@ struct mips_set_options
bfd_boolean single_float;
};
+/* Specifies whether module level options have been checked yet. */
+static bfd_boolean file_mips_opts_checked = FALSE;
+
/* True if -mnan=2008, false if -mnan=legacy. */
static bfd_boolean mips_flag_nan2008 = FALSE;
@@ -286,10 +289,6 @@ static struct mips_set_options mips_opts =
/* soft_float */ FALSE, /* single_float */ FALSE
};
-/* The set of ASEs that were selected on the command line, either
- explicitly via ASE options or implicitly through things like -march. */
-static unsigned int file_ase;
-
/* Which bits of file_ase were explicitly set or cleared by ASE options. */
static unsigned int file_ase_explicit;
@@ -1295,6 +1294,7 @@ static void s_ehword (int);
static void s_cpadd (int);
static void s_insn (int);
static void s_nan (int);
+static void s_module (int);
static void s_mips_ent (int);
static void s_mips_end (int);
static void s_mips_frame (int);
@@ -1307,6 +1307,7 @@ static bfd_boolean pic_need_relax (symbolS *, asection *);
static int relaxed_branch_length (fragS *, asection *, int);
static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int);
static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int);
+static void file_mips_check_options (void);
/* Table and functions used to map between CPU/ISA names, and
ISA levels, and CPU numbers. */
@@ -1692,6 +1693,7 @@ static const pseudo_typeS mips_pseudo_table[] =
{"cpadd", s_cpadd, 0},
{"insn", s_insn, 0},
{"nan", s_nan, 0},
+ {"module", s_module, 0},
/* Relatively generic pseudo-ops that happen to be used on MIPS
chips. */
@@ -1759,6 +1761,7 @@ static const pseudo_typeS mips_nonecoff_pseudo_table[] =
int
mips_address_bytes (void)
{
+ file_mips_check_options ();
return HAVE_64BIT_ADDRESSES ? 8 : 4;
}
@@ -1979,14 +1982,15 @@ mips_check_isa_supports_ases (void)
that were affected. */
static unsigned int
-mips_set_ase (const struct mips_ase *ase, bfd_boolean enabled_p)
+mips_set_ase (const struct mips_ase *ase, struct mips_set_options *opts,
+ bfd_boolean enabled_p)
{
unsigned int mask;
mask = mips_ase_mask (ase->flags);
- mips_opts.ase &= ~mask;
+ opts->ase &= ~mask;
if (enabled_p)
- mips_opts.ase |= ase->flags;
+ opts->ase |= ase->flags;
return mask;
}
@@ -3631,6 +3635,139 @@ md_begin (void)
init_vr4120_conflicts ();
}
+/* Perform consistency checks on the current options. */
+
+static void
+mips_check_options (struct mips_set_options *opts, bfd_boolean abi_checks)
+{
+ /* Check the size of integer registers agrees with the ABI and ISA. */
+ if (opts->gp == 64 && !ISA_HAS_64BIT_REGS (opts->isa))
+ as_bad (_("`gp=64' used with a 32-bit processor"));
+ else if (abi_checks
+ && opts->gp == 32 && ABI_NEEDS_64BIT_REGS (mips_abi))
+ as_bad (_("`gp=32' used with a 64-bit ABI"));
+ else if (abi_checks
+ && opts->gp == 64 && ABI_NEEDS_32BIT_REGS (mips_abi))
+ as_bad (_("`gp=64' used with a 32-bit ABI"));
+
+ /* Check the size of the float registers agrees with the ABI and ISA. */
+ switch (opts->fp)
+ {
+ case 64:
+ if (!ISA_HAS_64BIT_FPRS (opts->isa))
+ as_bad (_("`fp=64' used with a 32-bit fpu"));
+ else if (abi_checks
+ && ABI_NEEDS_32BIT_REGS (mips_abi)
+ && !ISA_HAS_MXHC1 (opts->isa))
+ as_warn (_("`fp=64' used with a 32-bit ABI"));
+ break;
+ case 32:
+ if (abi_checks
+ && ABI_NEEDS_64BIT_REGS (mips_abi))
+ as_warn (_("`fp=32' used with a 64-bit ABI"));
+ break;
+ default:
+ as_bad (_("Unknown size of floating point registers"));
+ break;
+ }
+
+ if (opts->micromips == 1 && opts->mips16 == 1)
+ as_bad (_("`mips16' cannot be used with `micromips'"));
+}
+
+/* Perform consistency checks on the module level options exactly once.
+ This is a deferred check that happens:
+ at the first .set directive
+ or, at the first pseudo op that generates code (inc .dc.a)
+ or, at the first instruction
+ or, at the end. */
+
+static void
+file_mips_check_options (void)
+{
+ const struct mips_cpu_info *arch_info = 0;
+
+ if (file_mips_opts_checked)
+ return;
+
+ /* The following code determines the register size.
+ Similar code was added to GCC 3.3 (see override_options() in
+ config/mips/mips.c). The GAS and GCC code should be kept in sync
+ as much as possible. */
+
+ if (file_mips_opts.gp < 0)
+ {
+ /* Infer the integer register size from the ABI and processor.
+ Restrict ourselves to 32-bit registers if that's all the
+ processor has, or if the ABI cannot handle 64-bit registers. */
+ file_mips_opts.gp = (ABI_NEEDS_32BIT_REGS (mips_abi)
+ || !ISA_HAS_64BIT_REGS (file_mips_opts.isa))
+ ? 32 : 64;
+ }
+
+ if (file_mips_opts.fp < 0)
+ {
+ /* No user specified float register size.
+ ??? GAS treats single-float processors as though they had 64-bit
+ float registers (although it complains when double-precision
+ instructions are used). As things stand, saying they have 32-bit
+ registers would lead to spurious "register must be even" messages.
+ So here we assume float registers are never smaller than the
+ integer ones. */
+ if (file_mips_opts.gp == 64)
+ /* 64-bit integer registers implies 64-bit float registers. */
+ file_mips_opts.fp = 64;
+ else if ((file_mips_opts.ase & FP64_ASES)
+ && ISA_HAS_64BIT_FPRS (file_mips_opts.isa))
+ /* Handle ASEs that require 64-bit float registers, if possible. */
+ file_mips_opts.fp = 64;
+ else
+ /* 32-bit float registers. */
+ file_mips_opts.fp = 32;
+ }
+
+ arch_info = mips_cpu_info_from_arch (file_mips_opts.arch);
+
+ /* End of GCC-shared inference code. */
+
+ /* This flag is set when we have a 64-bit capable CPU but use only
+ 32-bit wide registers. Note that EABI does not use it. */
+ if (ISA_HAS_64BIT_REGS (file_mips_opts.isa)
+ && ((mips_abi == NO_ABI && file_mips_opts.gp == 32)
+ || mips_abi == O32_ABI))
+ mips_32bitmode = 1;
+
+ if (file_mips_opts.isa == ISA_MIPS1 && mips_trap)
+ as_bad (_("trap exception not supported at ISA 1"));
+
+ /* If the selected architecture includes support for ASEs, enable
+ generation of code for them. */
+ if (file_mips_opts.mips16 == -1)
+ file_mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_opts.arch)) ? 1 : 0;
+ if (file_mips_opts.micromips == -1)
+ file_mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_opts.arch))
+ ? 1 : 0;
+
+ /* Some ASEs require 64-bit FPRs, so -mfp32 should stop those ASEs from
+ being selected implicitly. */
+ if (file_mips_opts.fp != 64)
+ file_ase_explicit |= ASE_MIPS3D | ASE_MDMX | ASE_MSA;
+
+ /* If the user didn't explicitly select or deselect a particular ASE,
+ use the default setting for the CPU. */
+ file_mips_opts.ase |= (arch_info->ase & ~file_ase_explicit);
+
+ /* Set up the current options. These may change throughout assembly. */
+ mips_opts = file_mips_opts;
+
+ mips_check_isa_supports_ases ();
+ mips_check_options (&file_mips_opts, TRUE);
+ file_mips_opts_checked = TRUE;
+
+ if (!bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_opts.arch))
+ as_warn (_("could not set architecture and machine"));
+}
+
void
md_assemble (char *str)
{
@@ -3638,6 +3775,8 @@ md_assemble (char *str)
bfd_reloc_code_real_type unused_reloc[3]
= {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED};
+ file_mips_check_options ();
+
imm_expr.X_op = O_absent;
offset_expr.X_op = O_absent;
offset_reloc[0] = BFD_RELOC_UNUSED;
@@ -13483,7 +13622,7 @@ md_parse_option (int c, char *arg)
for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
if (c == mips_ases[i].option_on || c == mips_ases[i].option_off)
{
- file_ase_explicit |= mips_set_ase (&mips_ases[i],
+ file_ase_explicit |= mips_set_ase (&mips_ases[i], &file_mips_opts,
c == mips_ases[i].option_on);
return 1;
}
@@ -13625,32 +13764,32 @@ md_parse_option (int c, char *arg)
break;
case OPTION_MICROMIPS:
- if (mips_opts.mips16 == 1)
+ if (file_mips_opts.mips16 == 1)
{
as_bad (_("-mmicromips cannot be used with -mips16"));
return 0;
}
- mips_opts.micromips = 1;
+ file_mips_opts.micromips = 1;
mips_no_prev_insn ();
break;
case OPTION_NO_MICROMIPS:
- mips_opts.micromips = 0;
+ file_mips_opts.micromips = 0;
mips_no_prev_insn ();
break;
case OPTION_MIPS16:
- if (mips_opts.micromips == 1)
+ if (file_mips_opts.micromips == 1)
{
as_bad (_("-mips16 cannot be used with -micromips"));
return 0;
}
- mips_opts.mips16 = 1;
+ file_mips_opts.mips16 = 1;
mips_no_prev_insn ();
break;
case OPTION_NO_MIPS16:
- mips_opts.mips16 = 0;
+ file_mips_opts.mips16 = 0;
mips_no_prev_insn ();
break;
@@ -13719,11 +13858,11 @@ md_parse_option (int c, char *arg)
break;
case OPTION_INSN32:
- mips_opts.insn32 = TRUE;
+ file_mips_opts.insn32 = TRUE;
break;
case OPTION_NO_INSN32:
- mips_opts.insn32 = FALSE;
+ file_mips_opts.insn32 = FALSE;
break;
case OPTION_MSHARED:
@@ -13735,11 +13874,11 @@ md_parse_option (int c, char *arg)
break;
case OPTION_MSYM32:
- mips_opts.sym32 = TRUE;
+ file_mips_opts.sym32 = TRUE;
break;
case OPTION_MNO_SYM32:
- mips_opts.sym32 = FALSE;
+ file_mips_opts.sym32 = FALSE;
break;
/* When generating ELF code, we permit -KPIC and -call_shared to
@@ -13892,22 +14031,7 @@ md_parse_option (int c, char *arg)
return 1;
}
-/* Set up globals to generate code for the ISA or processor
- described by INFO. */
-
-static void
-mips_set_architecture (const struct mips_cpu_info *info)
-{
- if (info != 0)
- {
- file_mips_opts.arch = info->cpu;
- mips_opts.arch = info->cpu;
- mips_opts.isa = info->isa;
- }
-}
-
-
-/* Likewise for tuning. */
+/* Set up globals to tune for the ISA or processor described by INFO. */
static void
mips_set_tune (const struct mips_cpu_info *info)
@@ -13934,7 +14058,7 @@ mips_after_parse_args (void)
if (mips_abi == NO_ABI)
mips_abi = MIPS_DEFAULT_ABI;
- /* The following code determines the architecture and register size.
+ /* The following code determines the architecture.
Similar code was added to GCC 3.3 (see override_options() in
config/mips/mips.c). The GAS and GCC code should be kept in sync
as much as possible. */
@@ -13972,7 +14096,14 @@ mips_after_parse_args (void)
as_bad (_("-march=%s is not compatible with the selected ABI"),
arch_info->name);
- mips_set_architecture (arch_info);
+ file_mips_opts.arch = arch_info->cpu;
+ file_mips_opts.isa = arch_info->isa;
+
+ /* Set up initial mips_opts state. */
+ mips_opts = file_mips_opts;
+
+ /* The register size inference code is now placed in
+ file_mips_check_options. */
/* Optimize for file_mips_opts.arch, unless -mtune selects a different
processor. */
@@ -13984,103 +14115,6 @@ mips_after_parse_args (void)
else
mips_set_tune (tune_info);
- if (file_mips_opts.gp >= 0)
- {
- /* The user specified the size of the integer registers. Make sure
- it agrees with the ABI and ISA. */
- if (file_mips_opts.gp == 64 && !ISA_HAS_64BIT_REGS (mips_opts.isa))
- as_bad (_("-mgp64 used with a 32-bit processor"));
- else if (file_mips_opts.gp == 32 && ABI_NEEDS_64BIT_REGS (mips_abi))
- as_bad (_("-mgp32 used with a 64-bit ABI"));
- else if (file_mips_opts.gp == 64 && ABI_NEEDS_32BIT_REGS (mips_abi))
- as_bad (_("-mgp64 used with a 32-bit ABI"));
- }
- else
- {
- /* Infer the integer register size from the ABI and processor.
- Restrict ourselves to 32-bit registers if that's all the
- processor has, or if the ABI cannot handle 64-bit registers. */
- file_mips_opts.gp = (ABI_NEEDS_32BIT_REGS (mips_abi)
- || !ISA_HAS_64BIT_REGS (mips_opts.isa))
- ? 32 : 64;
- }
-
- switch (file_mips_opts.fp)
- {
- default:
- case -1:
- /* No user specified float register size.
- ??? GAS treats single-float processors as though they had 64-bit
- float registers (although it complains when double-precision
- instructions are used). As things stand, saying they have 32-bit
- registers would lead to spurious "register must be even" messages.
- So here we assume float registers are never smaller than the
- integer ones. */
- if (file_mips_opts.gp == 64)
- /* 64-bit integer registers implies 64-bit float registers. */
- file_mips_opts.fp = 64;
- else if ((mips_opts.ase & FP64_ASES)
- && ISA_HAS_64BIT_FPRS (mips_opts.isa))
- /* Handle ASEs that require 64-bit float registers, if possible. */
- file_mips_opts.fp = 64;
- else
- /* 32-bit float registers. */
- file_mips_opts.fp = 32;
- break;
-
- /* The user specified the size of the float registers. Check if it
- agrees with the ABI and ISA. */
- case 64:
- if (!ISA_HAS_64BIT_FPRS (mips_opts.isa))
- as_bad (_("-mfp64 used with a 32-bit fpu"));
- else if (ABI_NEEDS_32BIT_REGS (mips_abi)
- && !ISA_HAS_MXHC1 (mips_opts.isa))
- as_warn (_("-mfp64 used with a 32-bit ABI"));
- break;
- case 32:
- if (ABI_NEEDS_64BIT_REGS (mips_abi))
- as_warn (_("-mfp32 used with a 64-bit ABI"));
- break;
- }
-
- /* End of GCC-shared inference code. */
-
- /* This flag is set when we have a 64-bit capable CPU but use only
- 32-bit wide registers. Note that EABI does not use it. */
- if (ISA_HAS_64BIT_REGS (mips_opts.isa)
- && ((mips_abi == NO_ABI && file_mips_opts.gp == 32)
- || mips_abi == O32_ABI))
- mips_32bitmode = 1;
-
- if (mips_opts.isa == ISA_MIPS1 && mips_trap)
- as_bad (_("trap exception not supported at ISA 1"));
-
- /* If the selected architecture includes support for ASEs, enable
- generation of code for them. */
- if (mips_opts.mips16 == -1)
- mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_opts.arch)) ? 1 : 0;
- if (mips_opts.micromips == -1)
- mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_opts.arch))
- ? 1 : 0;
-
- /* MIPS3D, MDMX and MSA require 64-bit FPRs, so -mfp32 should stop those
- ASEs from being selected implicitly. */
- if (file_mips_opts.fp != 64)
- file_ase_explicit |= ASE_MIPS3D | ASE_MDMX | ASE_MSA;
-
- /* If the user didn't explicitly select or deselect a particular ASE,
- use the default setting for the CPU. */
- mips_opts.ase |= (arch_info->ase & ~file_ase_explicit);
-
- file_mips_opts.isa = mips_opts.isa;
- file_mips_opts.ase = mips_opts.ase;
- mips_opts.gp = file_mips_opts.gp;
- mips_opts.fp = file_mips_opts.fp;
- mips_opts.soft_float = file_mips_opts.soft_float;
- mips_opts.single_float = file_mips_opts.single_float;
-
- mips_check_isa_supports_ases ();
-
if (mips_flag_mdebug < 0)
mips_flag_mdebug = 0;
}
@@ -14968,30 +15002,11 @@ struct mips_option_stack
static struct mips_option_stack *mips_opts_stack;
-/* Handle the .set pseudo-op. */
-
-static void
-s_mipsset (int x ATTRIBUTE_UNUSED)
+static bfd_boolean
+parse_code_option (char * name)
{
- char *name = input_line_pointer, ch;
const struct mips_ase *ase;
-
- while (!is_end_of_line[(unsigned char) *input_line_pointer])
- ++input_line_pointer;
- ch = *input_line_pointer;
- *input_line_pointer = '\0';
-
- if (strcmp (name, "reorder") == 0)
- {
- if (mips_opts.noreorder)
- end_noreorder ();
- }
- else if (strcmp (name, "noreorder") == 0)
- {
- if (!mips_opts.noreorder)
- start_noreorder ();
- }
- else if (strncmp (name, "at=", 3) == 0)
+ if (strncmp (name, "at=", 3) == 0)
{
char *s = name + 3;
@@ -14999,61 +15014,25 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
as_bad (_("unrecognized register name `%s'"), s);
}
else if (strcmp (name, "at") == 0)
- {
- mips_opts.at = ATREG;
- }
+ mips_opts.at = ATREG;
else if (strcmp (name, "noat") == 0)
- {
- mips_opts.at = ZERO;
- }
- else if (strcmp (name, "macro") == 0)
- {
- mips_opts.warn_about_macros = 0;
- }
- else if (strcmp (name, "nomacro") == 0)
- {
- if (mips_opts.noreorder == 0)
- as_bad (_("`noreorder' must be set before `nomacro'"));
- mips_opts.warn_about_macros = 1;
- }
+ mips_opts.at = ZERO;
else if (strcmp (name, "move") == 0 || strcmp (name, "novolatile") == 0)
- {
- mips_opts.nomove = 0;
- }
+ mips_opts.nomove = 0;
else if (strcmp (name, "nomove") == 0 || strcmp (name, "volatile") == 0)
- {
- mips_opts.nomove = 1;
- }
+ mips_opts.nomove = 1;
else if (strcmp (name, "bopt") == 0)
- {
- mips_opts.nobopt = 0;
- }
+ mips_opts.nobopt = 0;
else if (strcmp (name, "nobopt") == 0)
- {
- mips_opts.nobopt = 1;
- }
- else if (strcmp (name, "gp=default") == 0)
- mips_opts.gp = file_mips_opts.gp;
+ mips_opts.nobopt = 1;
else if (strcmp (name, "gp=32") == 0)
mips_opts.gp = 32;
else if (strcmp (name, "gp=64") == 0)
- {
- if (!ISA_HAS_64BIT_REGS (mips_opts.isa))
- as_warn (_("%s isa does not support 64-bit registers"),
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.gp = 64;
- }
- else if (strcmp (name, "fp=default") == 0)
- mips_opts.fp = file_mips_opts.fp;
+ mips_opts.gp = 64;
else if (strcmp (name, "fp=32") == 0)
mips_opts.fp = 32;
else if (strcmp (name, "fp=64") == 0)
- {
- if (!ISA_HAS_64BIT_FPRS (mips_opts.isa))
- as_warn (_("%s isa does not support 64-bit floating point registers"),
- mips_cpu_info_from_isa (mips_opts.isa)->name);
- mips_opts.fp = 64;
- }
+ mips_opts.fp = 64;
else if (strcmp (name, "softfloat") == 0)
mips_opts.soft_float = 1;
else if (strcmp (name, "hardfloat") == 0)
@@ -15064,45 +15043,29 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
mips_opts.single_float = 0;
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
- {
- if (mips_opts.micromips == 1)
- as_fatal (_("`mips16' cannot be used with `micromips'"));
- mips_opts.mips16 = 1;
- }
+ mips_opts.mips16 = 1;
else if (strcmp (name, "nomips16") == 0
|| strcmp (name, "noMIPS-16") == 0)
mips_opts.mips16 = 0;
else if (strcmp (name, "micromips") == 0)
- {
- if (mips_opts.mips16 == 1)
- as_fatal (_("`micromips' cannot be used with `mips16'"));
- mips_opts.micromips = 1;
- }
+ mips_opts.micromips = 1;
else if (strcmp (name, "nomicromips") == 0)
mips_opts.micromips = 0;
else if (name[0] == 'n'
&& name[1] == 'o'
&& (ase = mips_lookup_ase (name + 2)))
- mips_set_ase (ase, FALSE);
+ mips_set_ase (ase, &mips_opts, FALSE);
else if ((ase = mips_lookup_ase (name)))
- mips_set_ase (ase, TRUE);
+ mips_set_ase (ase, &mips_opts, TRUE);
else if (strncmp (name, "mips", 4) == 0 || strncmp (name, "arch=", 5) == 0)
{
- int reset = 0;
-
/* Permit the user to change the ISA and architecture on the fly.
Needless to say, misuse can cause serious problems. */
- if (strcmp (name, "mips0") == 0 || strcmp (name, "arch=default") == 0)
- {
- reset = 1;
- mips_opts.isa = file_mips_opts.isa;
- mips_opts.arch = file_mips_opts.arch;
- }
- else if (strncmp (name, "arch=", 5) == 0)
+ if (strncmp (name, "arch=", 5) == 0)
{
const struct mips_cpu_info *p;
- p = mips_parse_cpu("internal use", name + 5);
+ p = mips_parse_cpu ("internal use", name + 5);
if (!p)
as_bad (_("unknown architecture %s"), name + 5);
else
@@ -15115,7 +15078,7 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
{
const struct mips_cpu_info *p;
- p = mips_parse_cpu("internal use", name);
+ p = mips_parse_cpu ("internal use", name);
if (!p)
as_bad (_("unknown ISA level %s"), name + 4);
else
@@ -15126,46 +15089,6 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
}
else
as_bad (_("unknown ISA or architecture %s"), name);
-
- switch (mips_opts.isa)
- {
- case 0:
- break;
- case ISA_MIPS1:
- case ISA_MIPS2:
- case ISA_MIPS32:
- case ISA_MIPS32R2:
- case ISA_MIPS32R3:
- case ISA_MIPS32R5:
- mips_opts.gp = 32;
- mips_opts.fp = 32;
- break;
- case ISA_MIPS3:
- case ISA_MIPS4:
- case ISA_MIPS5:
- case ISA_MIPS64:
- case ISA_MIPS64R2:
- case ISA_MIPS64R3:
- case ISA_MIPS64R5:
- mips_opts.gp = 64;
- if (mips_opts.arch == CPU_R5900)
- {
- mips_opts.fp = 32;
- }
- else
- {
- mips_opts.fp = 64;
- }
- break;
- default:
- as_bad (_("unknown ISA level %s"), name + 4);
- break;
- }
- if (reset)
- {
- mips_opts.gp = file_mips_opts.gp;
- mips_opts.fp = file_mips_opts.fp;
- }
}
else if (strcmp (name, "autoextend") == 0)
mips_opts.noautoextend = 0;
@@ -15175,6 +15098,68 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
mips_opts.insn32 = TRUE;
else if (strcmp (name, "noinsn32") == 0)
mips_opts.insn32 = FALSE;
+ else if (strcmp (name, "sym32") == 0)
+ mips_opts.sym32 = TRUE;
+ else if (strcmp (name, "nosym32") == 0)
+ mips_opts.sym32 = FALSE;
+ else
+ return FALSE;
+ return TRUE;
+}
+
+/* Handle the .set pseudo-op. */
+
+static void
+s_mipsset (int x ATTRIBUTE_UNUSED)
+{
+ char *name = input_line_pointer, ch;
+ int prev_isa = mips_opts.isa;
+
+ file_mips_check_options ();
+
+ while (!is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ ch = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ if (strchr (name, ','))
+ {
+ /* Generic ".set" directive; use the generic handler. */
+ *input_line_pointer = ch;
+ input_line_pointer = name;
+ s_set (0);
+ return;
+ }
+
+ if (strcmp (name, "reorder") == 0)
+ {
+ if (mips_opts.noreorder)
+ end_noreorder ();
+ }
+ else if (strcmp (name, "noreorder") == 0)
+ {
+ if (!mips_opts.noreorder)
+ start_noreorder ();
+ }
+ else if (strcmp (name, "macro") == 0)
+ mips_opts.warn_about_macros = 0;
+ else if (strcmp (name, "nomacro") == 0)
+ {
+ if (mips_opts.noreorder == 0)
+ as_bad (_("`noreorder' must be set before `nomacro'"));
+ mips_opts.warn_about_macros = 1;
+ }
+ else if (strcmp (name, "gp=default") == 0)
+ mips_opts.gp = file_mips_opts.gp;
+ else if (strcmp (name, "fp=default") == 0)
+ mips_opts.fp = file_mips_opts.fp;
+ else if (strcmp (name, "mips0") == 0 || strcmp (name, "arch=default") == 0)
+ {
+ mips_opts.isa = file_mips_opts.isa;
+ mips_opts.arch = file_mips_opts.arch;
+ mips_opts.gp = file_mips_opts.gp;
+ mips_opts.fp = file_mips_opts.fp;
+ }
else if (strcmp (name, "push") == 0)
{
struct mips_option_stack *s;
@@ -15205,23 +15190,75 @@ s_mipsset (int x ATTRIBUTE_UNUSED)
free (s);
}
}
- else if (strcmp (name, "sym32") == 0)
- mips_opts.sym32 = TRUE;
- else if (strcmp (name, "nosym32") == 0)
- mips_opts.sym32 = FALSE;
- else if (strchr (name, ','))
+ else if (!parse_code_option (name))
+ as_warn (_("tried to set unrecognized symbol: %s\n"), name);
+
+ /* The use of .set [arch|cpu]= historically 'fixes' the width of gp and fp
+ registers based on what is supported by the arch/cpu. */
+ if (mips_opts.isa != prev_isa)
{
- /* Generic ".set" directive; use the generic handler. */
- *input_line_pointer = ch;
- input_line_pointer = name;
- s_set (0);
- return;
+ switch (mips_opts.isa)
+ {
+ case 0:
+ break;
+ case ISA_MIPS1:
+ case ISA_MIPS2:
+ case ISA_MIPS32:
+ case ISA_MIPS32R2:
+ case ISA_MIPS32R3:
+ case ISA_MIPS32R5:
+ mips_opts.gp = 32;
+ mips_opts.fp = 32;
+ break;
+ case ISA_MIPS3:
+ case ISA_MIPS4:
+ case ISA_MIPS5:
+ case ISA_MIPS64:
+ case ISA_MIPS64R2:
+ case ISA_MIPS64R3:
+ case ISA_MIPS64R5:
+ mips_opts.gp = 64;
+ if (mips_opts.arch == CPU_R5900)
+ mips_opts.fp = 32;
+ else
+ mips_opts.fp = 64;
+ break;
+ default:
+ as_bad (_("unknown ISA level %s"), name + 4);
+ break;
+ }
}
- else
+
+ mips_check_options (&mips_opts, FALSE);
+
+ mips_check_isa_supports_ases ();
+ *input_line_pointer = ch;
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the .module pseudo-op. */
+
+static void
+s_module (int ignore ATTRIBUTE_UNUSED)
+{
+ char *name = input_line_pointer, ch;
+
+ while (!is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ ch = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ if (!file_mips_opts_checked)
{
- as_warn (_("tried to set unrecognized symbol: %s\n"), name);
+ if (!parse_code_option (name))
+ as_bad (_(".module used with unrecognized symbol: %s\n"), name);
+
+ /* Update module level settings from mips_opts. */
+ file_mips_opts = mips_opts;
}
- mips_check_isa_supports_ases ();
+ else
+ as_bad (_(".module is not permitted after generating code"));
+
*input_line_pointer = ch;
demand_empty_rest_of_line ();
}
@@ -15268,6 +15305,8 @@ s_cpload (int ignore ATTRIBUTE_UNUSED)
int reg;
int in_shared;
+ file_mips_check_options ();
+
/* If we are not generating SVR4 PIC code, or if this is NewABI code,
.cpload is ignored. */
if (mips_pic != SVR4_PIC || HAVE_NEWABI)
@@ -15345,6 +15384,8 @@ s_cpsetup (int ignore ATTRIBUTE_UNUSED)
expressionS ex_sym;
int reg1;
+ file_mips_check_options ();
+
/* If we are not generating SVR4 PIC code, .cpsetup is ignored.
We also need NewABI support. */
if (mips_pic != SVR4_PIC || ! HAVE_NEWABI)
@@ -15448,6 +15489,8 @@ s_cpsetup (int ignore ATTRIBUTE_UNUSED)
static void
s_cplocal (int ignore ATTRIBUTE_UNUSED)
{
+ file_mips_check_options ();
+
/* If we are not generating SVR4 PIC code, or if this is not NewABI code,
.cplocal is ignored. */
if (mips_pic != SVR4_PIC || ! HAVE_NEWABI)
@@ -15476,6 +15519,8 @@ s_cprestore (int ignore ATTRIBUTE_UNUSED)
{
expressionS ex;
+ file_mips_check_options ();
+
/* If we are not generating SVR4 PIC code, or if this is NewABI code,
.cprestore is ignored. */
if (mips_pic != SVR4_PIC || HAVE_NEWABI)
@@ -15523,6 +15568,8 @@ s_cpreturn (int ignore ATTRIBUTE_UNUSED)
{
expressionS ex;
+ file_mips_check_options ();
+
/* If we are not generating SVR4 PIC code, .cpreturn is ignored.
We also need NewABI support. */
if (mips_pic != SVR4_PIC || ! HAVE_NEWABI)
@@ -15757,6 +15804,8 @@ s_cpadd (int ignore ATTRIBUTE_UNUSED)
{
int reg;
+ file_mips_check_options ();
+
/* This is ignored when not generating SVR4 PIC code. */
if (mips_pic != SVR4_PIC)
{
@@ -17378,7 +17427,7 @@ mips_elf_final_processing (void)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_M16;
if (file_ase_micromips)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MICROMIPS;
- if (file_ase & ASE_MDMX)
+ if (file_mips_opts.ase & ASE_MDMX)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MDMX;
/* Set the MIPS ELF ABI flags. */
@@ -18356,4 +18405,7 @@ md_mips_end (void)
mips_emit_delays ();
if (cur_proc_ptr)
as_warn (_("missing .end at end of assembly"));
+
+ /* Just in case no code was emitted, do the consistency check. */
+ file_mips_check_options ();
}
generated by cgit v1.1 at 2024-12-14 11:51:03 +0000