diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 161 |
1 files changed, 97 insertions, 64 deletions
@@ -10717,8 +10717,9 @@ echo $ECHO_N "checking where to find the target ar... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6 + ac_dir=`dirname $AR_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10738,8 +10739,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6 + ac_dir=`dirname $AR_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool AR_FOR_TARGET='$(AR)' @@ -10757,8 +10759,9 @@ echo $ECHO_N "checking where to find the target as... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6 + ac_dir=`dirname $AS_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10778,8 +10781,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6 + ac_dir=`dirname $AS_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool AS_FOR_TARGET='$(AS)' @@ -10797,8 +10801,9 @@ echo $ECHO_N "checking where to find the target cc... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6 + ac_dir=`dirname $CC_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10818,8 +10823,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6 + ac_dir=`dirname $CC_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool CC_FOR_TARGET='$(CC)' @@ -10837,8 +10843,9 @@ echo $ECHO_N "checking where to find the target c++... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6 + ac_dir=`dirname $CXX_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10861,8 +10868,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6 + ac_dir=`dirname $CXX_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool CXX_FOR_TARGET='$(CXX)' @@ -10880,8 +10888,9 @@ echo $ECHO_N "checking where to find the target c++ for libstdc++... $ECHO_C" >& if test "x${build}" != "x${host}" ; then if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6 + ac_dir=`dirname $RAW_CXX_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10904,8 +10913,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6 + ac_dir=`dirname $RAW_CXX_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool RAW_CXX_FOR_TARGET='$(CXX)' @@ -10923,8 +10933,9 @@ echo $ECHO_N "checking where to find the target dlltool... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6 + ac_dir=`dirname $DLLTOOL_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10944,8 +10955,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6 + ac_dir=`dirname $DLLTOOL_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool DLLTOOL_FOR_TARGET='$(DLLTOOL)' @@ -10963,8 +10975,9 @@ echo $ECHO_N "checking where to find the target gcc... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6 + ac_dir=`dirname $GCC_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -10984,8 +10997,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6 + ac_dir=`dirname $GCC_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool GCC_FOR_TARGET='$()' @@ -11003,8 +11017,9 @@ echo $ECHO_N "checking where to find the target gcj... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6 + ac_dir=`dirname $GCJ_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11027,8 +11042,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6 + ac_dir=`dirname $GCJ_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool GCJ_FOR_TARGET='$(GCJ)' @@ -11046,8 +11062,9 @@ echo $ECHO_N "checking where to find the target gfortran... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6 + ac_dir=`dirname $GFORTRAN_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11070,8 +11087,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6 + ac_dir=`dirname $GFORTRAN_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool GFORTRAN_FOR_TARGET='$(GFORTRAN)' @@ -11089,8 +11107,9 @@ echo $ECHO_N "checking where to find the target ld... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6 + ac_dir=`dirname $LD_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11110,8 +11129,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6 + ac_dir=`dirname $LD_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool LD_FOR_TARGET='$(LD)' @@ -11129,8 +11149,9 @@ echo $ECHO_N "checking where to find the target lipo... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6 + ac_dir=`dirname $LIPO_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11139,8 +11160,9 @@ echo "${ECHO_T}pre-installed" >&6 else if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6 + ac_dir=`dirname $LIPO_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool LIPO_FOR_TARGET='$(LIPO)' @@ -11158,8 +11180,9 @@ echo $ECHO_N "checking where to find the target nm... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6 + ac_dir=`dirname $NM_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11179,8 +11202,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6 + ac_dir=`dirname $NM_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool NM_FOR_TARGET='$(NM)' @@ -11198,8 +11222,9 @@ echo $ECHO_N "checking where to find the target objdump... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&6 + ac_dir=`dirname $OBJDUMP_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11219,8 +11244,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&6 + ac_dir=`dirname $OBJDUMP_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool OBJDUMP_FOR_TARGET='$(OBJDUMP)' @@ -11238,8 +11264,9 @@ echo $ECHO_N "checking where to find the target ranlib... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&6 + ac_dir=`dirname $RANLIB_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11259,8 +11286,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&6 + ac_dir=`dirname $RANLIB_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool RANLIB_FOR_TARGET='$(RANLIB)' @@ -11278,8 +11306,9 @@ echo $ECHO_N "checking where to find the target strip... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&6 + ac_dir=`dirname $STRIP_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11299,8 +11328,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&6 + ac_dir=`dirname $STRIP_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool STRIP_FOR_TARGET='$(STRIP)' @@ -11318,8 +11348,9 @@ echo $ECHO_N "checking where to find the target windres... $ECHO_C" >&6 if test "x${build}" != "x${host}" ; then if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&6 + ac_dir=`dirname $WINDRES_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 else # Canadian cross, just use what we found echo "$as_me:$LINENO: result: pre-installed" >&5 @@ -11339,8 +11370,9 @@ else echo "${ECHO_T}just compiled" >&6 elif expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path - echo "$as_me:$LINENO: result: pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&5 -echo "${ECHO_T}pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&6 + ac_dir=`dirname $WINDRES_FOR_TARGET` + echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5 +echo "${ECHO_T}pre-installed in $ac_dir" >&6 elif test "x$target" = "x$host"; then # We can use an host tool WINDRES_FOR_TARGET='$(WINDRES)' @@ -11551,6 +11583,7 @@ fi; + ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure |